From c20b4dd31820a551d0fb60bf27b99345905c2eb6 Mon Sep 17 00:00:00 2001 From: Christian Glindkamp Date: Thu, 9 Dec 2010 11:15:59 +0100 Subject: at91: Refactor Stamp9G20 and PControl G20 board file As PControl G20 is a carrier board for the Stamp9G20 SoM, some code can be shared. Therefore board-stamp9g20.c is refactored to allow reusing the SoM initialization and board-pcontrol-g20.c is modified to use it. Signed-off-by: Christian Glindkamp Signed-off-by: Nicolas Ferre --- arch/arm/mach-at91/include/mach/stamp9g20.h | 7 +++++++ 1 file changed, 7 insertions(+) create mode 100644 arch/arm/mach-at91/include/mach/stamp9g20.h (limited to 'arch/arm/mach-at91/include') diff --git a/arch/arm/mach-at91/include/mach/stamp9g20.h b/arch/arm/mach-at91/include/mach/stamp9g20.h new file mode 100644 index 000000000000..6120f9c46d59 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/stamp9g20.h @@ -0,0 +1,7 @@ +#ifndef __MACH_STAMP9G20_H +#define __MACH_STAMP9G20_H + +void stamp9g20_map_io(void); +void stamp9g20_board_init(void); + +#endif -- cgit v1.2.3 From a2255ff45143001fecbc5e5a4b58fcb999d393ae Mon Sep 17 00:00:00 2001 From: Yauhen Kharuzhy Date: Thu, 25 Nov 2010 12:11:51 +0200 Subject: mmc: at91_mci: fix multiblock SDIO transfers The AT91 MCI has special SDIO transfer types: SDIO block and SDIO byte transfers, but at91_mci driver doesn't use them and handles all SDIO transfers as ordinary MMC block transfers. This causes problems for multiple-block SDIO transfers (in particular for 256-bytes blocks). Fix this situation by checking the opcode for SDIO CMD53 and setting the transfer type in the AT91_MCI_CMDR register properly. This patch was tested with libertas SDIO driver: problem with TX timeouts on big packets was eliminated. Signed-off-by: Yauhen Kharuzhy Cc: Signed-off-by: Nicolas Ferre Acked-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Chris Ball --- arch/arm/mach-at91/include/mach/at91_mci.h | 2 ++ drivers/mmc/host/at91_mci.c | 13 +++++++++---- 2 files changed, 11 insertions(+), 4 deletions(-) (limited to 'arch/arm/mach-at91/include') diff --git a/arch/arm/mach-at91/include/mach/at91_mci.h b/arch/arm/mach-at91/include/mach/at91_mci.h index 57f8ee154943..27ac6f550fe3 100644 --- a/arch/arm/mach-at91/include/mach/at91_mci.h +++ b/arch/arm/mach-at91/include/mach/at91_mci.h @@ -74,6 +74,8 @@ #define AT91_MCI_TRTYP_BLOCK (0 << 19) #define AT91_MCI_TRTYP_MULTIPLE (1 << 19) #define AT91_MCI_TRTYP_STREAM (2 << 19) +#define AT91_MCI_TRTYP_SDIO_BYTE (4 << 19) +#define AT91_MCI_TRTYP_SDIO_BLOCK (5 << 19) #define AT91_MCI_BLKR 0x18 /* Block Register */ #define AT91_MCI_BLKR_BCNT(n) ((0xffff & (n)) << 0) /* Block count */ diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c index 591ab540b407..d3e6a962f423 100644 --- a/drivers/mmc/host/at91_mci.c +++ b/drivers/mmc/host/at91_mci.c @@ -69,6 +69,7 @@ #include #include +#include #include #include @@ -493,10 +494,14 @@ static void at91_mci_send_command(struct at91mci_host *host, struct mmc_command else if (data->flags & MMC_DATA_WRITE) cmdr |= AT91_MCI_TRCMD_START; - if (data->flags & MMC_DATA_STREAM) - cmdr |= AT91_MCI_TRTYP_STREAM; - if (data->blocks > 1) - cmdr |= AT91_MCI_TRTYP_MULTIPLE; + if (cmd->opcode == SD_IO_RW_EXTENDED) { + cmdr |= AT91_MCI_TRTYP_SDIO_BLOCK; + } else { + if (data->flags & MMC_DATA_STREAM) + cmdr |= AT91_MCI_TRTYP_STREAM; + if (data->blocks > 1) + cmdr |= AT91_MCI_TRTYP_MULTIPLE; + } } else { block_length = 0; -- cgit v1.2.3