summaryrefslogtreecommitdiff
path: root/fs/pstore
AgeCommit message (Collapse)AuthorFilesLines
2012-07-17pstore/ram: Make tracing log versionedAnton Vorontsov2-10/+15
Decoding the binary trace w/ a different kernel might be troublesome since we convert addresses to symbols. For kernels with minimal changes, the mappings would probably match, but it's not guaranteed at all. (But still we could convert the addresses by hand, since we do print raw addresses.) If we use modules, the symbols could be loaded at different addresses from the previously booted kernel, and so this would also fail, but there's nothing we can do about it. Also, the binary data format that pstore/ram is using in its ringbuffer may change between the kernels, so here we too must ensure that we're running the same kernel. So, there are two questions really: 1. How to compute the unique kernel tag; 2. Where to store it. In this patch we're using LINUX_VERSION_CODE, just as hibernation (suspend-to-disk) does. This way we are protecting from the kernel version mismatch, making sure that we're running the same kernel version and patch level. We could use CRC of a symbol table (as suggested by Tony Luck), but for now let's not be that strict. And as for storing, we are using a small trick here. Instead of allocating a dedicated buffer for the tag (i.e. another prz), or hacking ram_core routines to "reserve" some control data in the buffer, we are just encoding the tag into the buffer signature (and XOR'ing it with the actual signature value, so that buffers not needing a tag can just pass zero, which will result into the plain old PRZ signature). Suggested-by: Steven Rostedt <rostedt@goodmis.org> Suggested-by: Tony Luck <tony.luck@intel.com> Suggested-by: Colin Cross <ccross@android.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-17pstore: Headers should include all stuff they useAnton Vorontsov1-0/+2
Headers should really include all the needed prototypes, types, defines etc. to be self-contained. This is a long-standing issue, but apparently the new tracing code unearthed it (SMP=n is also a prerequisite): In file included from fs/pstore/internal.h:4:0, from fs/pstore/ftrace.c:21: include/linux/pstore.h:43:15: error: field ‘read_mutex’ has incomplete type While at it, I also added the following: linux/types.h -> size_t, phys_addr_t, uXX and friends linux/spinlock.h -> spinlock_t linux/errno.h -> Exxxx linux/time.h -> struct timespec (struct passed by value) struct module and rs_control forward declaration (passed via pointers). Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-17pstore/ram: Add ftrace messages handlingAnton Vorontsov1-4/+33
The ftrace log size is configurable via ramoops.ftrace_size module option, and the log itself is available via <pstore-mount>/ftrace-ramoops file. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-17pstore/ram: Convert to write_buf callbackAnton Vorontsov1-8/+9
Don't use pstore.buf directly, instead convert the code to write_buf callback which passes a pointer to a buffer as an argument. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-17pstore: Add persistent function tracingAnton Vorontsov6-5/+199
With this support kernel can save function call chain log into a persistent ram buffer that can be decoded and dumped after reboot through pstore filesystem. It can be used to determine what function was last called before a reset or panic. We store the log in a binary format and then decode it at read time. p.s. Mostly the code comes from trace_persistent.c driver found in the Android git tree, written by Colin Cross <ccross@android.com> (according to sign-off history). I reworked the driver a little bit, and ported it to pstore. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-17pstore: Introduce write_buf backend callbackAnton Vorontsov1-0/+10
For function tracing we need to stop using pstore.buf directly, since in a tracing callback we can't use spinlocks, and thus we can't safely use the global buffer. With write_buf callback, backends no longer need to access pstore.buf directly, and thus we can pass any buffers (e.g. allocated on stack). Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-17pstore/ram_core: Get rid of prz->ecc enable/disable flagAnton Vorontsov1-6/+4
Nowadays we can use prz->ecc_size as a flag, no need for the special member in the prz struct. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-17pstore/ram: Make ECC size configurableAnton Vorontsov2-15/+22
This is now pretty straightforward: instead of using bool, just pass an integer. For backwards compatibility ramoops.ecc=1 means 16 bytes ECC (using 1 byte for ECC isn't much of use anyway). Suggested-by: Arve Hjønnevåg <arve@android.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-17pstore/ram_core: Get rid of prz->ecc_symsize and prz->ecc_polyAnton Vorontsov1-4/+3
The struct members were never used anywhere outside of persistent_ram_init_ecc(), so there's actually no need for them to be in the struct. If we ever want to make polynomial or symbol size configurable, it would make more sense to just pass initialized rs_decoder to the persistent_ram init functions. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-25Merge 3.5-rc4 into staging-nextGreg Kroah-Hartman1-22/+12
This picks up the staging changes made in 3.5-rc4 so that everyone can sync up properly. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-20pstore/ram_core: Better ECC size checkingAnton Vorontsov1-8/+8
- Instead of exploiting unsigned overflows (which doesn't work for all sizes), use straightforward checking for ECC total size not exceeding initial buffer size; - Printing overflowed buffer_size is not informative. Instead, print ecc_size and buffer_size; - No need for buffer_size argument in persistent_ram_init_ecc(), we can address prz->buffer_size directly. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-20pstore/ram_core: Proper checking for post_init errors (e.g. improper ECC size)Anton Vorontsov1-7/+15
We will implement variable-sized ECC buffers soon, so post_init routine might fail much more likely, so we'd better check for its errors. To make error handling simple, modify persistent_ram_free() to it be safe at all times. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-20pstore/ram: Fix error handling during przs allocationAnton Vorontsov1-1/+1
persistent_ram_new() returns ERR_PTR() value on errors, so during freeing of the przs we should check for both NULL and IS_ERR() entries, otherwise bad things will happen. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-20pstore/ram: Probe as early as possibleAnton Vorontsov2-35/+37
Registering the platform driver before module_init allows us to log oopses that happen during device probing. This requires changing module_init to postcore_initcall, and switching from platform_driver_probe to platform_driver_register because the platform device is not registered when the platform driver is registered; and because we use driver_register, now can't use create_bundle() (since it will try to register the same driver once again), so we have to switch to platform_device_register_data(). Also, some __init -> __devinit changes were needed. Overall, the registration logic is now much clearer, since we have only one driver registration point, and just an optional dummy device, which is created from the module parameters. Suggested-by: Colin Cross <ccross@android.com> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-20Merge tag 'staging-3.5-rc4' of ↵Linus Torvalds3-11/+21
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging tree fixes from Greg Kroah-Hartman: "Here are a number of small fixes for the drivers/staging tree, as well as iio and pstore drivers (which came from the staging tree in the 3.5-rc1 merge). All of these are tiny, but resolve issues that people have been reporting. There's also a documentation update to reflect what the iio drivers really are doing, which is good to get straightened out. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'staging-3.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: r8712u: Add new USB IDs staging: gdm72xx: Release netlink socket properly iio: drop wrong reference from Kconfig pstore/inode: Make pstore_fill_super() static pstore/ram: Should zap persistent zone on unlink pstore/ram_core: Factor persistent_ram_zap() out of post_init() pstore/ram_core: Do not reset restored zone's position and size pstore/ram: Should update old dmesg buffer before reading staging:iio:ad7298: Fix linker error due to missing IIO kfifo buffer Revert "staging: usbip: bugfix for stack corruption on 64-bit architectures" staging: usbip: bugfix for stack corruption on 64-bit architectures staging/comedi: fix build for USB not enabled staging: omapdrm: fix crash when freeing bad fb staging:iio:ad7606: Re-add missing scale attribute iio: Fix potential use after free staging:iio: remove num_interrupt_lines from documentation iio: documentation: Add out_altvoltage and friends
2012-06-15kmsg - kmsg_dump() use iterator to receive log buffer contentKay Sievers1-22/+12
Provide an iterator to receive the log buffer content, and convert all kmsg_dump() users to it. The structured data in the kmsg buffer now contains binary data, which should no longer be copied verbatim to the kmsg_dump() users. The iterator should provide reliable access to the buffer data, and also supports proper log line-aware chunking of data while iterating. Signed-off-by: Kay Sievers <kay@vrfy.org> Tested-by: Tony Luck <tony.luck@intel.com> Reported-by: Anton Vorontsov <anton.vorontsov@linaro.org> Tested-by: Anton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13pstore/platform: Disable automatic updates by defaultAnton Vorontsov1-2/+4
Having automatic updates seems pointless for production system, and even dangerous and thus counter-productive: 1. If we can mount pstore, or read files, we can as well read /proc/kmsg. So, there's little point in duplicating the functionality and present the same information but via another userland ABI; 2. Expecting the kernel to behave sanely after oops/panic is naive. It might work, but you'd rather not try it. Screwed up kernel can do rather bad things, like recursive faults[1]; and pstore rather provoking bad things to happen. It uses: 1. Timers (assumes sane interrupts state); 2. Workqueues and mutexes (assumes scheduler in a sane state); 3. kzalloc (a working slab allocator); That's too much for a dead kernel, so the debugging facility itself might just make debugging harder, which is not what we want. Maybe for non-oops message types it would make sense to re-enable automatic updates, but so far I don't see any use case for this. Even for tracing, it has its own run-time/normal ABI, so we're only interested in pstore upon next boot, to retrieve what has gone wrong with HW or SW. So, let's disable the updates by default. [1] BUG: unable to handle kernel paging request at fffffffffffffff8 IP: [<ffffffff8104801b>] kthread_data+0xb/0x20 [...] Process kworker/0:1 (pid: 14, threadinfo ffff8800072c0000, task ffff88000725b100) [... Call Trace: [<ffffffff81043710>] wq_worker_sleeping+0x10/0xa0 [<ffffffff813687a8>] __schedule+0x568/0x7d0 [<ffffffff8106c24d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff81087e22>] ? call_rcu_sched+0x12/0x20 [<ffffffff8102b596>] ? release_task+0x156/0x2d0 [<ffffffff8102b45e>] ? release_task+0x1e/0x2d0 [<ffffffff8106c24d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff81368ac4>] schedule+0x24/0x70 [<ffffffff8102cba8>] do_exit+0x1f8/0x370 [<ffffffff810051e7>] oops_end+0x77/0xb0 [<ffffffff8135c301>] no_context+0x1a6/0x1b5 [<ffffffff8135c4de>] __bad_area_nosemaphore+0x1ce/0x1ed [<ffffffff81053156>] ? ttwu_queue+0xc6/0xe0 [<ffffffff8135c50b>] bad_area_nosemaphore+0xe/0x10 [<ffffffff8101fa47>] do_page_fault+0x2c7/0x450 [<ffffffff8106e34b>] ? __lock_release+0x6b/0xe0 [<ffffffff8106bf21>] ? mark_held_locks+0x61/0x140 [<ffffffff810502fe>] ? __wake_up+0x4e/0x70 [<ffffffff81185f7d>] ? trace_hardirqs_off_thunk+0x3a/0x3c [<ffffffff81158970>] ? pstore_register+0x120/0x120 [<ffffffff8136a37f>] page_fault+0x1f/0x30 [<ffffffff81158970>] ? pstore_register+0x120/0x120 [<ffffffff81185ab8>] ? memcpy+0x68/0x110 [<ffffffff8115875a>] ? pstore_get_records+0x3a/0x130 [<ffffffff811590f4>] ? persistent_ram_copy_old+0x64/0x90 [<ffffffff81158bf4>] ramoops_pstore_read+0x84/0x130 [<ffffffff81158799>] pstore_get_records+0x79/0x130 [<ffffffff81042536>] ? process_one_work+0x116/0x450 [<ffffffff81158970>] ? pstore_register+0x120/0x120 [<ffffffff8115897e>] pstore_dowork+0xe/0x10 [<ffffffff81042594>] process_one_work+0x174/0x450 [<ffffffff81042536>] ? process_one_work+0x116/0x450 [<ffffffff81042e13>] worker_thread+0x123/0x2d0 [<ffffffff81042cf0>] ? manage_workers.isra.28+0x120/0x120 [<ffffffff81047d8e>] kthread+0x8e/0xa0 [<ffffffff8136ba74>] kernel_thread_helper+0x4/0x10 [<ffffffff8136a199>] ? retint_restore_args+0xe/0xe [<ffffffff81047d00>] ? __init_kthread_worker+0x70/0x70 [<ffffffff8136ba70>] ? gs_change+0xb/0xb Code: be e2 00 00 00 48 c7 c7 d1 2a 4e 81 e8 bf fb fd ff 48 8b 5d f0 4c 8b 65 f8 c9 c3 0f 1f 44 00 00 48 8b 87 08 02 00 00 55 48 89 e5 <48> 8b 40 f8 5d c3 66 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 RIP [<ffffffff8104801b>] kthread_data+0xb/0x20 RSP <ffff8800072c1888> CR2: fffffffffffffff8 ---[ end trace 996a332dc399111d ]--- Fixing recursive fault but reboot is needed! Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13pstore/platform: Make automatic updates interval configurableAnton Vorontsov1-4/+11
There is no behavioural change, the default value is still 60 seconds. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13pstore/ram_core: Remove now unused codeAnton Vorontsov1-77/+0
The code tried to maintain the global list of persistent ram zones, which isn't a great idea overall, plus since Android's ram_console is no longer there, we can remove some unused functions. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13pstore/ram_core: Silence some printksAnton Vorontsov1-2/+2
Since we use multiple regions, the messages are somewhat annoying. We do print total mapped memory already, so no need to print the information for each region in the library routines. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13pstore/ram: Add console messages handlingAnton Vorontsov1-14/+86
The console log size is configurable via ramoops.console_size module option, and the log itself is available via <pstore-mount>/console-ramoops file. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13pstore/ram: Factor ramoops_get_next_prz() out of ramoops_pstore_read()Anton Vorontsov1-9/+32
This will help make code clearer when we'll add support for other message types. The patch also changes return value from -EINVAL to 0 in case of end-of-records. The exact value doesn't matter for pstore (it should be just <= 0), but 0 feels more correct. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13pstore/ram: Factor dmesg przs initialization out of probe()Anton Vorontsov1-37/+62
This will help make code clearer when we'll add support for other message types. This also makes probe() much shorter and understandable, plus makes mem/record size checking a bit easier. Implementation detail: we now use a paddr pointer, this will be used for allocating persistent ram zones for other message types. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13pstore/ram: Give proper names to dump-related variablesAnton Vorontsov1-17/+17
We're about to add support for other message types, so let's rename some variables to not be confused later. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13pstore: Add console log messages supportAnton Vorontsov3-0/+47
Pstore doesn't support logging kernel messages in run-time, it only dumps dmesg when kernel oopses/panics. This makes pstore useless for debugging hangs caused by HW issues or improper use of HW (e.g. weird device inserted -> driver tried to write a reserved bits -> SoC hanged. In that case we don't get any messages in the pstore. Therefore, let's add a runtime logging support: PSTORE_TYPE_CONSOLE. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13pstore/inode: Make pstore_fill_super() staticAnton Vorontsov1-1/+1
There's no reason to extern it. The patch fixes the annoying sparse warning: CHECK fs/pstore/inode.c fs/pstore/inode.c:264:5: warning: symbol 'pstore_fill_super' was not declared. Should it be static? Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13pstore/ram: Should zap persistent zone on unlinkAnton Vorontsov1-0/+1
Otherwise, unlinked file will reappear on the next boot. Reported-by: Kees Cook <keescook@chromium.org> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13pstore/ram_core: Factor persistent_ram_zap() out of post_init()Anton Vorontsov1-3/+8
A handy function that we will use outside of ram_core soon. But so far just factor it out and start using it in post_init(). Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13pstore/ram_core: Do not reset restored zone's position and sizeAnton Vorontsov1-0/+1
Otherwise, the files will survive just one reboot, and on a subsequent boot they will disappear. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-06-13pstore/ram: Should update old dmesg buffer before readingAnton Vorontsov2-7/+10
Without the update, we'll only see the new dmesg buffer after the reboot, but previously we could see it right away. Making an oops visible in pstore filesystem before reboot is a somewhat dubious feature, but removing it wasn't an intentional change, so let's restore it. For this we have to make persistent_ram_save_old() safe for calling multiple times, and also extern it. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-28Merge tag 'writeback' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linuxLinus Torvalds1-1/+1
Pull writeback tree from Wu Fengguang: "Mainly from Jan Kara to avoid iput() in the flusher threads." * tag 'writeback' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux: writeback: Avoid iput() from flusher thread vfs: Rename end_writeback() to clear_inode() vfs: Move waiting for inode writeback from end_writeback() to evict_inode() writeback: Refactor writeback_single_inode() writeback: Remove wb->list_lock from writeback_single_inode() writeback: Separate inode requeueing after writeback writeback: Move I_DIRTY_PAGES handling writeback: Move requeueing when I_SYNC set to writeback_sb_inodes() writeback: Move clearing of I_SYNC into inode_sync_complete() writeback: initialize global_dirty_limit fs: remove 8 bytes of padding from struct writeback_control on 64 bit builds mm: page-writeback.c: local functions should not be exposed globally
2012-05-17pstore/ram: Add ECC supportAnton Vorontsov1-3/+12
This is now straightforward: just introduce a module parameter and pass the needed value to persistent_ram_new(). Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Acked-by: Marco Stornelli <marco.stornelli@gmail.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-17pstore/ram: Switch to persistent_ram routinesAnton Vorontsov1-47/+59
The patch switches pstore RAM backend to use persistent_ram routines, one step closer to the ECC support. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Acked-by: Marco Stornelli <marco.stornelli@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-17staging: android: persistent_ram: Move to fs/pstore/ram_core.cAnton Vorontsov3-3/+538
This is a first step for adding ECC support for pstore RAM backend: we will use the persistent_ram routines, kindly provided by Google. Basically, persistent_ram is a set of helper routines to deal with the [optionally] ECC-protected persistent ram regions. A bit of Makefile, Kconfig and header files adjustments were needed because of the move. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-16ramoops: Move to fs/pstore/ram.cAnton Vorontsov3-0/+379
Since ramoops was converted to pstore, it has nothing to do with character devices nowadays. Instead, today it is just a RAM backend for pstore. The patch just moves things around. There are a few changes were needed because of the move: 1. Kconfig and Makefiles fixups, of course. 2. In pstore/ram.c we have to play a bit with MODULE_PARAM_PREFIX, this is needed to keep user experience the same as with ramoops driver (i.e. so that ramoops.foo kernel command line arguments would still work). Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Acked-by: Marco Stornelli <marco.stornelli@gmail.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-06vfs: Rename end_writeback() to clear_inode()Jan Kara1-1/+1
After we moved inode_sync_wait() from end_writeback() it doesn't make sense to call the function end_writeback() anymore. Rename it to clear_inode() which well says what the function really does - set I_CLEAR flag. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
2012-04-05Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds1-7/+1
Merge batch of fixes from Andrew Morton: "The simple_open() cleanup was held back while I wanted for laggards to merge things. I still need to send a few checkpoint/restore patches. I've been wobbly about merging them because I'm wobbly about the overall prospects for success of the project. But after speaking with Pavel at the LSF conference, it sounds like they're further toward completion than I feared - apparently davem is at the "has stopped complaining" stage regarding the net changes. So I need to go back and re-review those patchs and their (lengthy) discussion." * emailed from Andrew Morton <akpm@linux-foundation.org>: (16 patches) memcg swap: use mem_cgroup_uncharge_swap fix backlight: add driver for DA9052/53 PMIC v1 C6X: use set_current_blocked() and block_sigmask() MAINTAINERS: add entry for sparse checker MAINTAINERS: fix REMOTEPROC F: typo alpha: use set_current_blocked() and block_sigmask() simple_open: automatically convert to simple_open() scripts/coccinelle/api/simple_open.cocci: semantic patch for simple_open() libfs: add simple_open() hugetlbfs: remove unregister_filesystem() when initializing module drivers/rtc/rtc-88pm860x.c: fix rtc irq enable callback fs/xattr.c:setxattr(): improve handling of allocation failures fs/xattr.c:listxattr(): fall back to vmalloc() if kmalloc() failed fs/xattr.c: suppress page allocation failure warnings from sys_listxattr() sysrq: use SEND_SIG_FORCED instead of force_sig() proc: fix mount -t proc -o AAA
2012-04-05simple_open: automatically convert to simple_open()Stephen Boyd1-7/+1
Many users of debugfs copy the implementation of default_open() when they want to support a custom read/write function op. This leads to a proliferation of the default_open() implementation across the entire tree. Now that the common implementation has been consolidated into libfs we can replace all the users of this function with simple_open(). This replacement was done with the following semantic patch: <smpl> @ open @ identifier open_f != simple_open; identifier i, f; @@ -int open_f(struct inode *i, struct file *f) -{ ( -if (i->i_private) -f->private_data = i->i_private; | -f->private_data = i->i_private; ) -return 0; -} @ has_open depends on open @ identifier fops; identifier open.open_f; @@ struct file_operations fops = { ... -.open = open_f, +.open = simple_open, ... }; </smpl> [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-31pstore: trim pstore_get_inode()Al Viro1-18/+8
move mode-dependent parts to callers, kill unused arguments Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-03-23Merge tag 'pstore-for-linus' of ↵Linus Torvalds1-8/+22
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull one pstore patch from Tony Luck * tag 'pstore-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: pstore: Introduce get_reason_str() to pstore
2012-03-20tidy up after d_make_root() conversionAl Viro1-17/+7
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-03-20switch open-coded instances of d_make_root() to new helperAl Viro1-2/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-03-16pstore: Introduce get_reason_str() to pstoreSeiji Aguchi1-8/+22
Recently, there has been some changes in kmsg_dump() below and they have been applied to linus-tree. (1) kmsg_dump(KMSG_DUMP_KEXEC) was removed. http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commitdiff;h=a3dd3323058d281abd584b15ad4c5b65064d7a61 (2) The order of "enum kmsg_dump_reason" was modified. http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commitdiff;h=c22ab332902333f83766017478c1ef6607ace681 Replace the fragile reason_str array with a more robust solution that will not be broken by future re-arrangements of the enum values. Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Don Zickus <dzickus@redhat.com> Link: https://lkml.org/lkml/2012/3/16/417 Signed-off-by: Tony Luck <tony.luck@intel.com>
2011-11-18pstore: gracefully handle NULL pstore_info functionsKees Cook2-4/+5
If a pstore backend doesn't want to support various portions of the pstore interface, it can just leave those functions NULL instead of creating no-op stubs. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
2011-11-17pstore: pass reason to backend write callbackKees Cook1-29/+1
This allows a backend to filter on the dmesg reason as well as the pstore reason. When ramoops is switched to pstore, this is needed since it has no interest in storing non-crash dmesg details. Drop pstore_write() as it has no users, and handling the "reason" here has no obviously correct value. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
2011-11-17pstore: pass allocated memory region back to callerKees Cook1-5/+8
The buf_lock cannot be held while populating the inodes, so make the backend pass forward an allocated and filled buffer instead. This solves the following backtrace. The effect is that "buf" is only ever used to notify the backends that something was written to it, and shouldn't be used in the read path. To replace the buf_lock during the read path, isolate the open/read/close loop with a separate mutex to maintain serialized access to the backend. Note that is is up to the pstore backend to cope if the (*write)() path is called in the middle of the read path. [ 59.691019] BUG: sleeping function called from invalid context at .../mm/slub.c:847 [ 59.691019] in_atomic(): 0, irqs_disabled(): 1, pid: 1819, name: mount [ 59.691019] Pid: 1819, comm: mount Not tainted 3.0.8 #1 [ 59.691019] Call Trace: [ 59.691019] [<810252d5>] __might_sleep+0xc3/0xca [ 59.691019] [<810a26e6>] kmem_cache_alloc+0x32/0xf3 [ 59.691019] [<810b53ac>] ? __d_lookup_rcu+0x6f/0xf4 [ 59.691019] [<810b68b1>] alloc_inode+0x2a/0x64 [ 59.691019] [<810b6903>] new_inode+0x18/0x43 [ 59.691019] [<81142447>] pstore_get_inode.isra.1+0x11/0x98 [ 59.691019] [<81142623>] pstore_mkfile+0xae/0x26f [ 59.691019] [<810a2a66>] ? kmem_cache_free+0x19/0xb1 [ 59.691019] [<8116c821>] ? ida_get_new_above+0x140/0x158 [ 59.691019] [<811708ea>] ? __init_rwsem+0x1e/0x2c [ 59.691019] [<810b67e8>] ? inode_init_always+0x111/0x1b0 [ 59.691019] [<8102127e>] ? should_resched+0xd/0x27 [ 59.691019] [<8137977f>] ? _cond_resched+0xd/0x21 [ 59.691019] [<81142abf>] pstore_get_records+0x52/0xa7 [ 59.691019] [<8114254b>] pstore_fill_super+0x7d/0x91 [ 59.691019] [<810a7ff5>] mount_single+0x46/0x82 [ 59.691019] [<8114231a>] pstore_mount+0x15/0x17 [ 59.691019] [<811424ce>] ? pstore_get_inode.isra.1+0x98/0x98 [ 59.691019] [<810a8199>] mount_fs+0x5a/0x12d [ 59.691019] [<810b9174>] ? alloc_vfsmnt+0xa4/0x14a [ 59.691019] [<810b9474>] vfs_kern_mount+0x4f/0x7d [ 59.691019] [<810b9d7e>] do_kern_mount+0x34/0xb2 [ 59.691019] [<810bb15f>] do_mount+0x5fc/0x64a [ 59.691019] [<810912fb>] ? strndup_user+0x2e/0x3f [ 59.691019] [<810bb3cb>] sys_mount+0x66/0x99 [ 59.691019] [<8137b537>] sysenter_do_call+0x12/0x26 Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
2011-10-12pstore: make pstore write function return normal success/fail valueChen Gong1-5/+6
Currently pstore write interface employs record id as return value, but it is not enough because it can't tell caller if the write operation is successful. Pass the record id back via an argument pointer and return zero for success, non-zero for failure. Signed-off-by: Chen Gong <gong.chen@linux.intel.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2011-08-16pstore: change mutex locking to spin_locksDon Zickus1-7/+21
pstore was using mutex locking to protect read/write access to the backend plug-ins. This causes problems when pstore is executed in an NMI context through panic() -> kmsg_dump(). This patch changes the mutex to a spin_lock_irqsave then also checks to see if we are in an NMI context. If we are in an NMI and can't get the lock, just print a message stating that and blow by the locking. All this is probably a hack around the bigger locking problem but it solves my current situation of trying to sleep in an NMI context. Tested by loading the lkdtm module and executing a HARDLOCKUP which will cause the machine to panic inside the nmi handler. Signed-off-by: Don Zickus <dzickus@redhat.com> Acked-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2011-08-16pstore: defer inserting OOPS entries into pstoreLuck, Tony3-14/+82
Life is simple for all the kernel terminating types of kmsg_dump call backs - pstore just saves the tail end of the console log. But for "oops" the situation is more complex - the kernel may carry on running (possibly for ever). So we'd like to make the logged copy of the oops appear in the pstore filesystem - so that the user has a handle to clear the entry from the persistent backing store (if we don't, the store may fill with "oops" entries (that are also safely stashed in /var/log/messages) leaving no space for real errors. Current code calls pstore_mkfile() immediately. But this may not be safe. The oops could have happened with arbitrary locks held, or in interrupt or NMI context. So allocating memory and calling into generic filesystem code seems unwise. This patch defers making the entry appear. At the time of the oops, we merely set a flag "pstore_new_entry" noting that a new entry has been added. A periodic timer checks once a minute to see if the flag is set - if so, it schedules a work queue to rescan the backing store and make all new entries appear in the pstore filesystem. Signed-off-by: Tony Luck <tony.luck@intel.com>
2011-07-22pstore: Allow the user to explicitly choose a backendMatthew Garrett1-0/+11
pstore only allows one backend to be registered at present, but the system may provide several. Add a parameter to allow the user to choose which backend will be used rather than just relying on load order. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-25 18:56:33 +0000