summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2010-11-24sisfb: delete dead SIS_XORG_XF86 codeAaro Koskinen7-788/+0
Delete code for compiling the driver for X.org/XFree86. The development has forked, so there is no point keeping this code in the tree. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-24sisfb: delete fallback code for pci_map_rom()Aaro Koskinen1-17/+0
If pci_map_rom() fails, there is some fallback code that basically duplicates pci_map_rom() on non-x86 platforms. No point in that. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-24sisfb: delete obsolete PCI ROM bug workaroundAaro Koskinen1-8/+0
Delete a workaround for a PCI ROM bug that has been fixed ages ago by the commit 761a3ac08c63718dacde12aaf0ec6d6760e8c2b7. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Thomas Winischhofer <thomas@winischhofer.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-17lxfb: Program panel v/h sync output polarity correctlyDaniel Drake1-2/+2
Commit b5c26f97ec4a17c65 introduced some breakage for the OLPC XO-1 laptop, differences in the output video signal after the patch caused some problems with the XO's display controller chip. Reviewing of that commit against the AMD Geode LX Data Book, it seems that these bits were being set inversely. In both cases, active high output is denoted by a value of 0. See section 6.8.3.44 of the databook from February 2009 (Publication ID: 33234H) Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-17fbcmap: integer overflow bugDan Carpenter1-8/+20
There is an integer overflow in fb_set_user_cmap() because cmap->len * 2 can wrap. It's basically harmless. Your terminal will be messed up until you type reset. This patch does three things to fix the bug. First, it checks the return value of fb_copy_cmap() in fb_alloc_cmap(). That is enough to fix address the overflow. Second it checks for the integer overflow in fb_set_user_cmap(). Lastly I wanted to cap "cmap->len" in fb_set_user_cmap() much lower because it gets used to determine the size of allocation. Unfortunately no one knows what the limit should be. Instead what this patch does is makes the allocation happen with GFP_KERNEL instead of GFP_ATOMIC and lets the kmalloc() decide what values of cmap->len are reasonable. To do this, the patch introduces a function called fb_alloc_cmap_gfp() which is like fb_alloc_cmap() except that it takes a GFP flag. Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-17fbcmap: cleanup white space in fb_alloc_cmap()Dan Carpenter1-24/+30
checkpatch.pl and Andrew Morton both complained about the indenting in fb_alloc_cmap() Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-16fbdev: sh_mobile_lcdcfb: fix bug in reconfig()Arnd Hannemann1-2/+2
The function sh_mobile_fb_reconfig() contained a bug, which caused the line_length to be set wrongly, if a mode with a different X-resolution than the default one was chosen. This caused 1080p24 mode to not work on AP4EVB. Additionally the notifier chain was also called with the wrong mode. This patch fixes this, by using the X-resolution of the new mode instead of the old one to calculate line length and hands over the correct mode to the notifier chain. Signed-off-by: Arnd Hannemann <arnd@arndnet.de> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-15Merge branch 'hwmon-for-linus' of ↵Linus Torvalds5-42/+192
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (w83795) Check for BEEP pin availability hwmon: (w83795) Clear intrusion alarm immediately hwmon: (w83795) Read the intrusion state properly hwmon: (w83795) Print the actual temperature channels as sources hwmon: (w83795) List all usable temperature sources hwmon: (w83795) Expose fan control method hwmon: (w83795) Fix fan control mode attributes hwmon: (lm95241) Check validity of input values hwmon: Change mail address of Hans J. Koch
2010-11-15Merge branch 'i2c-for-linus' of ↵Linus Torvalds9-13/+12
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c: Sanity checks on adapter registration i2c: Mark i2c_adapter.id as deprecated i2c: Drivers shouldn't include <linux/i2c-id.h> i2c: Delete unused adapter IDs i2c: Remove obsolete cleanup for clientdata
2010-11-15Merge branch 'for-linus' of ↵Linus Torvalds6-29/+91
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: sysfs: fix printk warnings PCI: fix pci_bus_alloc_resource() hang, prefer positive decode PCI: read current power state at enable time PCI: fix size checks for mmap() on /proc/bus/pci files x86/PCI: coalesce overlapping host bridge windows PCI hotplug: ibmphp: Add check to prevent reading beyond mapped area
2010-11-15i2c: Sanity checks on adapter registrationJean Delvare1-0/+12
Make sure I2C adapters being registered have the required struct fields set. If they don't, problems will happen later. Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-11-15i2c: Mark i2c_adapter.id as deprecatedJean Delvare1-1/+0
It's about time to make it clear that i2c_adapter.id is deprecated. Hopefully this will remind the last user to move over to a different strategy. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Jarod Wilson <jarod@redhat.com> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
2010-11-15i2c: Drivers shouldn't include <linux/i2c-id.h>Jean Delvare3-3/+0
Drivers don't need to include <linux/i2c-id.h>, especially not when they don't use anything that header file provides. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Michael Hunold <michael@mihu.de> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-11-15i2c: Delete unused adapter IDsJean Delvare1-1/+0
Delete unused I2C adapter IDs. Special cases are: * I2C_HW_B_RIVA was still set in driver rivafb, however no other driver is ever looking for this value, so we can safely remove it. * I2C_HW_B_HDPVR is used in staging driver lirc_zilog, however no adapter ID is ever set to this value, so the code in question never runs. As the code additionally expects that I2C_HW_B_HDPVR may not be defined, we can delete it now and let the lirc_zilog driver maintainer rewrite this piece of code. Big thanks for Hans Verkuil for doing all the hard work :) Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Jarod Wilson <jarod@redhat.com> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
2010-11-15i2c: Remove obsolete cleanup for clientdataWolfram Sang4-8/+0
A few new i2c-drivers came into the kernel which clear the clientdata-pointer on exit. This is obsolete meanwhile, so fix it and hope the word will spread. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Alan Cox <alan@linux.intel.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-11-15Fix gcc 4.5.1 miscompiling drivers/char/i8k.c (again)Jim Bos1-4/+4
The fix in commit 6b4e81db2552 ("i8k: Tell gcc that *regs gets clobbered") to work around the gcc miscompiling i8k.c to add "+m (*regs)" caused register pressure problems and a build failure. Changing the 'asm' statement to 'asm volatile' instead should prevent that and works around the gcc bug as well, so we can remove the "+m". [ Background on the gcc bug: a memory clobber fails to mark the function the asm resides in as non-pure (aka "__attribute__((const))"), so if the function does nothing else that triggers the non-pure logic, gcc will think that that function has no side effects at all. As a result, callers will be mis-compiled. Adding the "+m" made gcc see that it's not a pure function, and so does "asm volatile". The problem was never really the need to mark "*regs" as changed, since the memory clobber did that part - the problem was just a bug in the gcc "pure" function analysis - Linus ] Signed-off-by: Jim Bos <jim876@xs4all.nl> Acked-by: Jakub Jelinek <jakub@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-15hwmon: (w83795) Check for BEEP pin availabilityJean Delvare1-7/+51
On the W83795ADG, there's a single pin for BEEP and OVT#, so you can't have both. Check the configuration and don't create beep attributes when BEEP pin is not available. The W83795G has a dedicated BEEP pin so the functionality is always available there. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-11-15hwmon: (w83795) Clear intrusion alarm immediatelyJean Delvare1-0/+4
When asked to clear the intrusion alarm, do so immediately. We have to invalidate the cache to make sure the new status will be read. But we also have to read from the status register once to clear the pending alarm, as writing to CLR_CHS surprising won't clear it automatically. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-11-15hwmon: (w83795) Read the intrusion state properlyJean Delvare1-3/+20
We can't read the intrusion state from the real-time alarm registers as we do for all other alarm flags, because real-time alarm bits don't stick (by definition) and the intrusion state has to stick until explicitly cleared (otherwise it has little value.) So we have to use the interrupt status register instead, which is read from the same address but with a configuration bit flipped in another register. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-11-15hwmon: (w83795) Print the actual temperature channels as sourcesJean Delvare1-10/+20
Don't expose raw register values to user-space. Decode and encode temperature channels selected as temperature sources as needed. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-11-15hwmon: (w83795) List all usable temperature sourcesJean Delvare1-3/+54
Temperature sources are not correlated directly with temperature channels. A look-up table is required to find out which temperature sources can be used depending on which temperature channels (both analog and digital) are enabled. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-11-15hwmon: (w83795) Expose fan control methodJean Delvare1-1/+18
Expose fan control method (DC vs. PWM) using the standard sysfs attributes. I've made it read-only as the board should be wired for a given mode, the BIOS should have set up the chip for this mode, and you shouldn't have to change it. But it would be easy enough to make it changeable if someone comes up with a use case. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-11-15hwmon: (w83795) Fix fan control mode attributesJean Delvare1-10/+8
There were two bugs: * Speed cruise mode was improperly reported for all fans but fan1. * Fan control method (PWM vs. DC) was mixed with the control mode. It will be added back as a separate attribute, as per the standard sysfs interface. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-11-15hwmon: (lm95241) Check validity of input valuesJean Delvare1-5/+14
This clears the following build-time warnings I was seeing: drivers/hwmon/lm95241.c: In function "set_interval": drivers/hwmon/lm95241.c:132:15: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result drivers/hwmon/lm95241.c: In function "set_max2": drivers/hwmon/lm95241.c:278:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result drivers/hwmon/lm95241.c: In function "set_max1": drivers/hwmon/lm95241.c:277:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result drivers/hwmon/lm95241.c: In function "set_min2": drivers/hwmon/lm95241.c:249:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result drivers/hwmon/lm95241.c: In function "set_min1": drivers/hwmon/lm95241.c:248:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result drivers/hwmon/lm95241.c: In function "set_type2": drivers/hwmon/lm95241.c:220:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result drivers/hwmon/lm95241.c: In function "set_type1": drivers/hwmon/lm95241.c:219:1: warning: ignoring return value of "strict_strtol", declared with attribute warn_unused_result This also fixes a small race in set_interval() as a side effect: by working with a temporary local variable we prevent data->interval from being accessed at a time it contains the interval value in the wrong unit. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: Davide Rizzo <elpa.rizzo@gmail.com>
2010-11-15hwmon: Change mail address of Hans J. KochHans J. Koch3-4/+4
My old mail address doesn't exist anymore. This changes all occurrences to my new address. Signed-off-by: Hans J. Koch <hjk@hansjkoch.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-11-15PCI: sysfs: fix printk warningsRandy Dunlap1-1/+2
Cast pci_resource_start() and pci_resource_len() to u64 for printk. drivers/pci/pci-sysfs.c:753: warning: format '%16Lx' expects type 'long long unsigned int', but argument 9 has type 'resource_size_t' drivers/pci/pci-sysfs.c:753: warning: format '%16Lx' expects type 'long long unsigned int', but argument 10 has type 'resource_size_t' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-11-15Merge branch 'fbdev-fixes-for-linus' of ↵Linus Torvalds4-16/+35
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6 * 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6: fsl-diu-fb: drop dead ioctl define MAINTAINERS: Add an fbdev git tree entry. OMAP: DSS: Fix documentation regarding 'vram' kernel parameter OMAP: VRAM: Fix boot-time memory allocation OMAP: VRAM: improve VRAM error prints sisfb: limit POST memory test according to PCI resource length fbdev: sh_mobile_lcdc: use correct number of modes, when using the default fbdev: sh_mobile_lcdc: use the standard CEA-861 720p timing fbdev: sh_mobile_hdmi: properly clean up modedb on monitor unplug
2010-11-15sh: intc: Fix up build failure introduced by radix tree changes.Paul Mundt1-1/+1
The radix tree retry logic got a bit of an overhaul and subsequently broke the virtual IRQ subgroup build. Simply switch over to radix_tree_deref_retry() as per the filemap changes, which the virq lookup logic was modelled after in the first place. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-15Merge branch 'master' of ↵Paul Mundt248-2205/+7518
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into sh/urgent
2010-11-13Merge branch 'urgent' of ↵Linus Torvalds11-15/+21
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6 * 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: drivers/pcmcia/soc_common.c: Use printf extension %pV pcmcia: fix warning in synclink driver pcmcia/sa1100: don't put machine specific init functions in .init.text pcmcia/cm4000: fix error code pd6729: Coding Style fixes
2010-11-13Revert "8250: Fix tcsetattr to avoid ioctl(TIOCMIWAIT) hang"Ingo Molnar1-4/+1
This reverts commit 47d3904fe40d62deee8cd46e79ca784e7a548acd. Crashes any x86 serial console bootup: Console: colour VGA+ 80x25 BUG: unable to handle kernel NULL pointer dereference at 0000000000000158 IP: [<ffffffff811ebcb4>] serial8250_do_set_termios+0x1d4/0x430 ... Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Greg KH <gregkh@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds2-2/+2
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: padlock - Fix AES-CBC handling on odd-block-sized input crypto: n2 - dubious error check
2010-11-13Merge branch 'v4l_for_linus' of ↵Linus Torvalds20-92/+86
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: [media] soc-camera: Compile fixes for mx2-camera [media] SoC Camera: ov6650: minor cleanups [media] SOC Camera: OMAP1: typo fix [media] SoC Camera: OMAP1: update for recent videobuf changes [media] SoC Camera: OMAP1: update for recent framework changes [media] ARM mx3_camera: check for DMA engine type [media] tm6000: bugfix set tv standards [media] cafe_ccic: fix subdev configuration [media] saa7134: Fix autodetect for Behold A7 and H7 TV cards [media] v4l: kill the BKL [media] BZ#22292: dibx000_common: Restore i2c algo pointer
2010-11-13i8k: Tell gcc that *regs gets clobberedJim Bos1-2/+3
More recent GCC caused the i8k driver to stop working, on Slackware compiler was upgraded from gcc-4.4.4 to gcc-4.5.1 after which it didn't work anymore, meaning the driver didn't load or gave total nonsensical output. As it turned out the asm(..) statement forgot to mention it modifies the *regs variable. Credits to Andi Kleen and Andreas Schwab for providing the fix. Signed-off-by: Jim Bos <jim876@xs4all.nl> Cc: Andi Kleen <andi@firstfloor.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-13ACPI: debugfs custom_method open to non-rootDave Jones1-1/+1
Currently we have: --w--w--w-. 1 root root 0 2010-11-11 14:56 /sys/kernel/debug/acpi/custom_method which is just crazy. Change this to --w-------. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com> Cc: stable@kernel.org (for 2.6.36) Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds31-207/+312
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (66 commits) can-bcm: fix minor heap overflow gianfar: Do not call device_set_wakeup_enable() under a spinlock ipv6: Warn users if maximum number of routes is reached. docs: Add neigh/gc_thresh3 and route/max_size documentation. axnet_cs: fix resume problem for some Ax88790 chip ipv6: addrconf: don't remove address state on ifdown if the address is being kept tcp: Don't change unlocked socket state in tcp_v4_err(). x25: Prevent crashing when parsing bad X.25 facilities cxgb4vf: add call to Firmware to reset VF State. cxgb4vf: Fail open if link_start() fails. cxgb4vf: flesh out PCI Device ID Table ... cxgb4vf: fix some errors in Gather List to skb conversion cxgb4vf: fix bug in Generic Receive Offload cxgb4vf: don't implement trivial (and incorrect) ndo_select_queue() ixgbe: Look inside vlan when determining offload protocol. bnx2x: Look inside vlan when determining checksum proto. vlan: Add function to retrieve EtherType from vlan packets. virtio-net: init link state correctly ucc_geth: Fix deadlock ucc_geth: Do not bring the whole IF down when TX failure. ...
2010-11-12Merge branch 'upstream-linus' of ↵Linus Torvalds3-4/+5
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: drivers/ata/pata_octeon_cf.c: delete double assignment pata_legacy: fix CONFIG_PATA_WINBOND_VLB_MODULE test libata: fix NULL sdev dereference race in atapi_qc_complete()
2010-11-12Merge branch 'staging-linus' of ↵Linus Torvalds63-793/+3751
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6 * 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (38 commits) Revert "staging: tidspbridge: replace iommu custom for opensource implementation" Revert "staging: tidspbridge - move shared memory iommu maps to tiomap3430.c" Revert "staging: tidspbridge - rename bridge_brd_mem_map/unmap to a proper name" Revert "staging: tidspbridge - remove custom mmu code from tiomap3430.c" Revert "staging: tidspbridge - fix mmufault support" Revert "staging: tidspbridge - remove hw directory" Revert "staging: tidspbridge - move all iommu related code to a new file" Revert "staging: tidspbridge: remove dw_dmmu_base from cfg_hostres struct" Revert "staging: tidspbridge - remove reserved memory clean up" Revert "staging: tidspbridge - deprecate reserve/unreserve_memory funtions" Revert "staging: tidspbridge - remove dmm custom module" Revert "staging: tidspbridge - update Kconfig to select IOMMU module" staging: tidspbridge: hardcode SCM macros while fix is upstreamed Staging: keucr driver: fix uninitialized variable & proper memset length omap: dsp: remove shm from normal memory Staging: wlan-ng: Fix wrong #ifdef #endif sequence Staging: Update parameters for cfg80211 key management operation Staging: ath6kl: Fix pointer casts on 64-bit architectures Staging: batman-adv: suppress false warning when changing the mac address Staging: batman-adv: fix interface alternating and bonding reggression ...
2010-11-12Merge branch 'usb-linus' of ↵Linus Torvalds19-97/+184
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (28 commits) Revert "USB: xhci: Use GFP_ATOMIC under spin_lock" USB: ohci-jz4740: Fix spelling in MODULE_ALIAS UWB: Return UWB_RSV_ALLOC_NOT_FOUND rather than crashing on NULL dereference if kzalloc fails usb: core: fix information leak to userland usb: misc: iowarrior: fix information leak to userland usb: misc: sisusbvga: fix information leak to userland usb: subtle increased memory usage in u_serial USB: option: fix when the driver is loaded incorrectly for some Huawei devices. USB: xhci: Use GFP_ATOMIC under spin_lock usb: gadget: goku_udc: add registered flag bit, fixing build USB: ehci/mxc: compile fix USB: Fix FSL USB driver on non Open Firmware systems USB: the development of the usb tree is now in git usb: musb: fail unaligned DMA transfers on v1.8 and above USB: ftdi_sio: add device IDs for Milkymist One JTAG/serial usb.h: fix ioctl kernel-doc info usb: musb: gadget: kill duplicate code in musb_gadget_queue() usb: musb: Fix handling of spurious SESSREQ usb: musb: fix kernel oops when loading musb_hdrc module for the 2nd time USB: musb: blackfin: push clkin value to platform resources ...
2010-11-12Merge branch 'tty-linus' of ↵Linus Torvalds10-27/+91
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6 * 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: n_gsm: Fix length handling n_gsm: Copy n2 over when configuring via ioctl interface serial: bfin_5xx: grab port lock before making port termios changes serial: bfin_5xx: disable CON_PRINTBUFFER for consoles serial: bfin_5xx: remove redundant SSYNC to improve TX speed serial: bfin_5xx: always include DMA headers vcs: make proper usage of the poll flags amiserial: Remove unused variable icount 8250: Fix tcsetattr to avoid ioctl(TIOCMIWAIT) hang tty_ldisc: Fix BUG() on hangup TTY: restore tty_ldisc_wait_idle SERIAL: blacklist si3052 chip drivers/serial/bfin_5xx.c: Fix line continuation defects tty: prevent DOS in the flush_to_ldisc 8250: add support for Kouwell KW-L221N-2 nozomi: Fix warning from the previous TIOCGCOUNT changes tty: fix warning in synclink driver tty: Fix formatting in tty.h tty: the development tree is now done in git
2010-11-12Merge branch 'upstream/core' of ↵Linus Torvalds1-7/+18
git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen * 'upstream/core' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: xen: do not release any memory under 1M in domain 0 xen: events: do not unmask event channels on resume xen: correct size of level2_kernel_pgt
2010-11-12Merge branch 'stable/xen-pcifront-fixes' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/xen-pcifront-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: MAINTAINERS: Mark XEN lists as moderated xen-pcifront: fix PCI reference leak xen-pcifront: Remove duplicate inclusion of headers. xen: fix memory leak in Xen PCI MSI/MSI-X allocator. MAINTAINERS: Update mailing list name for Xen pieces.
2010-11-12drivers/ata/pata_octeon_cf.c: delete double assignmentJulia Lawall1-2/+0
Delete successive assignments to the same location. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression i; @@ *i = ...; i = ...; // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-11-12pata_legacy: fix CONFIG_PATA_WINBOND_VLB_MODULE testTejun Heo1-1/+1
pata_legacy is incorrectly testing PATA_WINBOND_VLB_MODULE instead of CONFIG_PATA_WINBOND_VLB_MODULE. Fix it. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: "Robert P. J. Day" <rpjday@crashcourse.ca> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-11-12libata: fix NULL sdev dereference race in atapi_qc_complete()Tejun Heo1-1/+4
SCSI commands may be issued between __scsi_add_device() and dev->sdev assignment, so it's unsafe for ata_qc_complete() to dereference dev->sdev->locked without checking whether it's NULL or not. Fix it. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-11-12gianfar: Do not call device_set_wakeup_enable() under a spinlockRafael J. Wysocki1-2/+3
The gianfar driver calls device_set_wakeup_enable() under a spinlock, which causes a problem to happen after the recent core power management changes, because this function can sleep now. Fix this by moving the device_set_wakeup_enable() call out of the spinlock-protected area. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-12axnet_cs: fix resume problem for some Ax88790 chipKen Kawasaki1-10/+20
axnet_cs: Some Ax88790 chip need to reinitialize the CISREG_CCSR register after resume. Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-12cxgb4vf: add call to Firmware to reset VF State.Casey Leedom3-0/+36
Add call to Firmware to reset its VF State when we first attach to the VF. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-12cxgb4vf: Fail open if link_start() fails.Casey Leedom1-1/+3
Fail open if link_start() fails. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-11-12cxgb4vf: flesh out PCI Device ID Table ...Casey Leedom1-0/+8
Add a bunch of T4 Device IDs for the VF Driver. Signed-off-by: Casey Leedom <leedom@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-12 02:05:16 +0000