summaryrefslogtreecommitdiff
path: root/drivers/pci
AgeCommit message (Collapse)AuthorFilesLines
2008-11-20Merge branch 'core-fixes-for-linus' of ↵Linus Torvalds1-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: intel-iommu: fix compile warnings
2008-11-19PCI: Fix disable IRQ 0 in pci_reset_function()Sheng Yang1-2/+2
Before initialization, dev->irq may be zero. Make sure we don't disable it at reset time in that case. Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-11-19intel-iommu: fix compile warningsFUJITA Tomonori1-2/+4
Impact: cleanup I got the following warnings on IA64: linux-2.6/drivers/pci/intel-iommu.c: In function 'init_dmars': linux-2.6/drivers/pci/intel-iommu.c:1658: warning: format '%Lx' expects type 'long long unsigned int', but argument 2 has type 'u64' linux-2.6/drivers/pci/intel-iommu.c:1663: warning: format '%Lx' expects type 'long long unsigned int', but argument 2 has type 'u64' Another victim of int-ll64.h versus int-l64.h confusion between platforms. ->reg_base_addr has a type of u64 - which can only be printed out consistently if we cast its type up to LL. [ Eventually reg_base_addr should be converted to phys_addr_t, for which we have the %pR printk helper - but that is out of the scope of late -rc's. ] Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-11PCI: ignore bit0 of _OSC return codeKenji Kaneshige1-7/+8
Currently acpi_run_osc() checks all the bits in _OSC result code (the first DWORD in the capabilities buffer) to see error condition. But the bit 0, which doesn't indicate any error, must be ignored. The bit 0 is used as the query flag at _OSC invocation time. Some platforms clear it during _OSC evaluation, but the others don't. On latter platforms, current acpi_run_osc() mis-detects error when _OSC is evaluated with query flag set because it doesn't ignore the bit 0. Because of this, the __acpi_query_osc() always fails on such platforms. And this is the cause of the problem that pci_osc_control_set() doesn't work since the commit 4e39432f4df544d3dfe4fc90a22d87de64d15815 which changed pci_osc_control_set() to use __acpi_query_osc(). Tested-by:"Tomasz Czernecki <czernecki@gmail.com> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-11-03PCI: fix range check on mmapped sysfs resource filesEd Swierk1-1/+1
pci_mmap_fits() returns the wrong answer if the sysfs resource file size is not a multiple of the page size. vm_end and vm_start are already page-aligned, so size - start < nr, causing mmap() to return EINVAL. Signed-off-by: Ed Swierk <eswierk@aristanetworks.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-11-03PCI: remove excess kernel-doc notationRandy Dunlap1-2/+4
Fix pci/rom.c kernel-doc function notation: Warning(drivers/pci/rom.c:110): Excess function parameter or struct member 'return' description in 'pci_map_rom' Warning(drivers/pci/rom.c:177): Excess function parameter or struct member 'return' description in 'pci_map_rom_copy' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-11-03PCI: fix VPD limit quirk for Broadcom 5708SYu Zhao1-18/+18
VPD quirks need to be called after the VPD capability is initialized. Since VPD initialization now runs after pci_fixup_header (due to the capabilities consolidation), VPD quirks should be done at pci_fixup_final stage correspondingly. Tested-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-30Merge branch 'for-linus' of ↵Linus Torvalds1-14/+0
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: x86/PCI: build failure at x86/kernel/pci-dma.c with !CONFIG_PCI
2008-10-25ACPI: Oops in ACPI with git latestRafael J. Wysocki1-0/+3
ACPI Warning (nseval-0168): Insufficient arguments - method [_OSC] needs 5, found 4 [20080926] ACPI Warning (nspredef-0252): \_SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, expected 4 [20080926] ACPI Error (nspredef-0163): \_SB_.PCI0._OSC: Missing expected return value [20080926] BUG: unable to handle kernel NULL pointer dereference at 00000000 IP: [<c0237671>] acpi_run_osc+0xa1/0x170 Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Tested-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-24x86/PCI: build failure at x86/kernel/pci-dma.c with !CONFIG_PCIFenghua Yu1-14/+0
On Thu, Oct 23, 2008 at 04:09:52PM -0700, Alexander Beregalov wrote: > arch/x86/kernel/built-in.o: In function `iommu_setup': > pci-dma.c:(.init.text+0x36ad): undefined reference to `forbid_dac' > pci-dma.c:(.init.text+0x36cc): undefined reference to `forbid_dac' > pci-dma.c:(.init.text+0x3711): undefined reference to `forbid_dac This patch partially reverts a patch to add IOMMU support to ia64. The forbid_dac variable was incorrectly moved to quirks.c, which isn't built when PCI is disabled. Tested-by: "Alexander Beregalov" <a.beregalov@gmail.com> Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-23Fix PCI hotplug printk formatRandy Dunlap1-1/+1
Fix printk format warning: drivers/pci/hotplug/acpiphp_ibm.c:207: warning: format '%08lx' expects type 'long unsigned int', but argument 3 has type 'long long unsigned int' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-23PCI: remove unused resource assignment in pci_read_bridge_bases()Zhao, Yu1-3/+0
This cleanup removes the resource assignment in pci_read_bridge_bases() since it has taken care by pci_alloc_child_bus() when allocating the bus: /* Set up default resource pointers and names.. */ for (i = 0; i < PCI_BRIDGE_RES_NUM; i++) { child->resource[i] = &bridge->resource[PCI_BRIDGE_RESOURCES+i]; child->resource[i]->name = child->name; } Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-23PCI hotplug: shpchp: message refinementTaku Izumi5-98/+86
This patch refines messages in shpchp module. The main changes are as follows: - remove the trailing "." - remove __func__ as much as possible - capitalize the first letter of messages - show PCI device address including its domain Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-23PCI hotplug: shpchp: replace printk with dev_printkTaku Izumi5-159/+224
This patch replaces printks within shpchp module with dev_printks. Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-23PCI: add routines for debugging and handling lost interruptsJames Bottomley2-1/+62
We're getting a lot of storage drivers blamed for interrupt misrouting issues. This patch provides a standard way of reporting the problem ... and, if possible, correcting it. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-23PCI hotplug: pciehp: message refinementTaku Izumi5-88/+78
This patch refines messages in pciehp module. The main changes are as follows: - remove the trailing "." - remove __func__ as much as possible - capitalize the first letter of messages - show PCI device address including its domain Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-23PCI: fix ARI code to be compatible with mixed ARI/non-ARI systemsZhao, Yu1-8/+13
The original ARI support code has a compatibility problem with non-ARI devices. If a device doesn't support ARI, turning on ARI forwarding on its upper level bridge will cause undefined behavior. This fix turns on ARI forwarding only when the subordinate devices support it. Tested-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-23PCI hotplug: cpqphp: fix kernel NULL pointer dereferenceKenji Kaneshige1-1/+1
The following patch fixes the regression in 2.6.27 that causes kernel NULL pointer dereference at cpqphp driver probe time. This patch should be backported to the .27 stable series. Seems to have been introduced by f46753c5e354b857b20ab8e0fe7b2579831dc369. The root cause of this problem seems that cpqphp driver calls pci_hp_register() wrongly. In current implementation, cpqphp driver passes 'ctrl->pci_dev->subordinate' as a second parameter for pci_hp_register(). But because hotplug slots and it's hotplug controller (exists as a pci funcion) are on the same bus, it should be 'ctrl->pci_dev->bus' instead. Cc: <stable@kernel.org> Tested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-23Merge branch 'release' of ↵Linus Torvalds3-12/+14
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (123 commits) dock: make dock driver not a module ACPI: fix ia64 build warning ACPI: hack around sysfs warning with link order ACPI suspend: fix build warning when CONFIG_ACPI_SLEEP=n intel_menlo: fix build warning panasonic-laptop: fix build ACPICA: Update version to 20080926 ACPICA: Add support for zero-length buffer-to-string conversions ACPICA: New: Validation for predefined ACPI methods/objects ACPICA: Fix for implicit return compatibility ACPICA: Fixed a couple memory leaks associated with "implicit return" ACPICA: Optimize buffer allocation procedure ACPICA: Fix possible memory leak, error exit path ACPICA: Fix fault after mem allocation failure in AML parser ACPICA: Remove unused ACPI register bit definition ACPICA: Update version to 20080829 ACPICA: Fix possible memory leak in acpi_ns_get_external_pathname ACPICA: Cleanup for internal Reference Object ACPICA: Update comments - no functional changes ACPICA: Update for Reference ACPI_OPERAND_OBJECT ...
2008-10-23Merge branch 'linux-next' of ↵Linus Torvalds28-386/+614
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (32 commits) PCI hotplug: fix logic in Compaq hotplug controller bus speed setup PCI: don't export linux/io.h from pci.h PCI: PCI_QUIRKS depends on PCI PCI hotplug: pciehp: poll data link layer link active PCI hotplug: pciehp: fix possible memory leak in pcie_init PCI: Workaround invalid P2P bridge bus numbers PCI Hotplug: fakephp: add duplicate slot name debugging PCI: Hotplug core: remove 'name' PCI: shcphp: remove 'name' parameter PCI: SGI Hotplug: stop managing bss_hotplug_slot->name PCI: rpaphp: kmalloc/kfree slot->name directly PCI: pciehp: remove 'name' parameter PCI: ibmphp: stop managing hotplug_slot->name PCI: fakephp: remove 'name' parameter PCI, PCI Hotplug: introduce slot_name helpers PCI: cpqphp: stop managing hotplug_slot->name PCI: cpci_hotplug: stop managing hotplug_slot->name PCI: acpiphp: remove 'name' parameter PCI: prevent duplicate slot names PCI Hotplug: serialize pci_hp_register and pci_hp_deregister ...
2008-10-23Merge branch 'linus' into testLen Brown39-1308/+1872
Conflicts: MAINTAINERS arch/x86/kernel/acpi/boot.c arch/x86/kernel/acpi/sleep.c drivers/acpi/Kconfig drivers/pnp/Makefile drivers/pnp/quirks.c Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-22Merge branch 'ull' into testLen Brown3-10/+10
Conflicts: drivers/acpi/bay.c drivers/acpi/dock.c drivers/ata/libata-acpi.c Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-22Merge branch 'dock' into testLen Brown1-2/+4
Conflicts: drivers/acpi/osl.c Signed-off-by: Len Brown <len.brown@intel.com>
2008-10-22PCI hotplug: fix logic in Compaq hotplug controller bus speed setupJulia Lawall1-1/+1
The pattern !E && !E->fld is nonsensical. The patch below updates this according to the assumption that && should be ||. But perhaps another solution was intended. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @disable and_comm@ expression E; identifier fld; @@ - !E && !E->fld + !E || !E->fld // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI hotplug: pciehp: poll data link layer link activeKenji Kaneshige3-4/+55
This patch adds polling mechanism for Data Link Layer Link Active bit after turning power on, instead of waiting for 1000 msec. This reduces reduce the unnecessary long wait. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI hotplug: pciehp: fix possible memory leak in pcie_initKenji Kaneshige1-2/+2
Fix the error paths in pcie_init to avoid leaking memory. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI: Workaround invalid P2P bridge bus numbersBenjamin Herrenschmidt1-2/+10
Some firmware fail to properly configure P2P bridges, leaving them with invalid bus numbers. In some cases, this happens on some embedded 4xx boards as the result of the kernel allocating different bus space than the firmware does to host bridges while not setting pcibios_assign_all_busses() for various reasons. In other cases, it can just be bogus firmware. This adds some sanity checking to the PCI probing code. If a bridge is found whose primary bus number doesn't match the bus it's sitting on, or whose secondary bus number not strictly above it's primary bus number, then the bridge bus numbers are deconfigured in the first pass of pci_scan_bridge() to be re-assigned in the second pass. Tested-by: "Ayman El-Khashab" <AymanE@tanisys.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI Hotplug: fakephp: add duplicate slot name debuggingAlex Chiang1-2/+8
The PCI core now manages slot names on behalf of slot detection and slot hotplug drivers, including the handling of duplicate slot names. We can use the fakephp driver to help test the new functionality. Add a 'dup_slots' module param to force fakephp to create multiple slots with the same name. We can then verify that the PCI core correctly renamed the slots. sapphire:/sys/bus/pci/slots # modprobe fakephp dup_slots sapphire:/sys/bus/pci/slots # ls fake fake-10 fake-3 fake-5 fake-7 fake-9 fake-1 fake-2 fake-4 fake-6 fake-8 Cc: kristen.c.accardi@intel.com Cc: matthew@wil.cx Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI: Hotplug core: remove 'name'Alex Chiang1-3/+3
Now that the PCI core manages the 'name' for each individual hotplug driver, and all drivers (except rpaphp) have been converted to use hotplug_slot_name(), there is no need for the PCI hotplug core to drag around its own copy of name either. Cc: kristen.c.accardi@intel.com Cc: matthew@wil.cx Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI: shcphp: remove 'name' parameterAlex Chiang3-47/+48
We do not need to manage our own name parameter, especially since the PCI core can change it on our behalf, in the case of duplicate slot names. Remove 'name' from shpchp's version of struct slot. This change also removes the unused struct task_event from the slot structure. Cc: kristen.c.accardi@intel.com Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI: SGI Hotplug: stop managing bss_hotplug_slot->nameAlex Chiang1-13/+6
We no longer need to manage our version of hotplug_slot->name since the PCI and hotplug core manage it on our behalf. Update the sn_hp_slot_private_alloc() interface to fill in the correct name for us, as that function already has all the parameters needed to determine the name. Cc: kristen.c.accardi@intel.com Cc: jpk@sgi.com Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI: rpaphp: kmalloc/kfree slot->name directlyAlex Chiang1-5/+3
rpaphp tends to use slot->name directly everywhere, and doesn't ever need slot->hotplug_slot->name. struct hotplug_slot->name is going away, so convert rpaphp directly manipulate its own slot->name everywhere, and don't bother touching slot->hotplug_slot->name. Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI: pciehp: remove 'name' parameterAlex Chiang4-44/+52
We do not need to manage our own name parameter, especially since the PCI core can change it on our behalf, in the case of duplicate slot names. Remove 'name' from pciehp's version of struct slot, and remove unused 'task_list' as well. Cc: kristen.c.accardi@intel.com Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI: ibmphp: stop managing hotplug_slot->nameAlex Chiang2-16/+9
We no longer need to manage our version of hotplug_slot->name since the PCI and hotplug core manage it on our behalf. Now, we simply advise the PCI core of the name that we would like, and let the core take care of the rest. Additionally, slightly rearrange the members of struct slot so they are naturally aligned to eliminate holes. Cc: jbarnes@virtuousgeek.org Cc: kristen.c.accardi@intel.com Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI: fakephp: remove 'name' parameterAlex Chiang1-9/+10
Remove 'name' from fakephp's struct dummy_slot, as the PCI core will now manage our slot name for us. Cc: jbarnes@virtuousgeek.org Cc: kristen.c.accardi@intel.com Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI, PCI Hotplug: introduce slot_name helpersAlex Chiang1-1/+1
In preparation for cleaning up the various hotplug drivers such that they don't have to manage their own 'name' parameters anymore, we provide the following convenience functions: pci_slot_name() hotplug_slot_name() These helpers will be used by individual hotplug drivers. Cc: kristen.c.accardi@intel.com Cc: matthew@wil.cx Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI: cpqphp: stop managing hotplug_slot->nameAlex Chiang2-31/+24
We no longer need to manage our version of hotplug_slot->name since the PCI and hotplug core manage it on our behalf. Now, we simply advise the PCI core of the name that we would like, and let the core take care of the rest. Cc: jbarnes@virtuousgeek.org Cc: kristen.c.accardi@intel.com Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI: cpci_hotplug: stop managing hotplug_slot->nameAlex Chiang3-49/+37
We no longer need to manage our version of hotplug_slot->name since the PCI and hotplug core manage it on our behalf. Now, we simply advise the PCI core of the name that we would like, and let the core take care of the rest. Cc: kristen.c.accardi@intel.com Cc: scottm@somanetworks.com Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI: acpiphp: remove 'name' parameterAlex Chiang2-19/+21
We do not need to manage our own name parameter, especially since the PCI core can change it on our behalf, in the case of duplicate slot names. Remove 'name' from acpiphp's version of struct slot. Cc: kristen.c.accardi@intel.com Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI: prevent duplicate slot namesAlex Chiang4-82/+115
Prevent callers of pci_create_slot() from registering slots with duplicate names. This condition occurs most often when PCI hotplug drivers are loaded on platforms with broken firmware that assigns identical names to multiple slots. We now rename these duplicate slots on behalf of the user. If firmware assigns the name N to multiple slots, then: The first registered slot is assigned N The second registered slot is assigned N-1 The third registered slot is assigned N-2 etc. This is the permanent fix mentioned in earlier commits d6a9e9b4 and 167e782e (shpchp/pciehp: Rename duplicate slot name...). We take advantage of the new 'hotplug' parameter in pci_create_slot() to prevent a slot create/rename race between hotplug drivers and detection drivers. Scenario A: hotplug driver detection driver -------------- ---------------- pci_create_slot(hotplug=set) pci_create_slot(hotplug=NULL) The hotplug driver creates the slot with its desired name, and then releases the semaphore. Now, the detection driver tries to create the same slot, but it already exists. We don't care about renaming, so return the existing slot. Scenario B: hotplug driver detection driver -------------- ---------------- pci_create_slot(hotplug=NULL) pci_create_slot(hotplug=set) The detection driver creates the slot with name "X". Then the hotplug driver tries to create the same slot, but wants the name "Y" instead. We detect that we're trying to create the same slot and that we also want a rename, so rename the slot to "Y" and return. Scenario C: hotplug driver hotplug driver -------------- ---------------- pci_create_slot(hotplug=set) pci_create_slot(hotplug=set) Two separate hotplug drivers are attempting to claim the slot and are passing valid hotplug_slot args to pci_create_slot(). We detect that the slot already has a ->hotplug callback, prevent a rename, and return -EBUSY. Cc: kristen.c.accardi@intel.com Cc: matthew@wil.cx Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI Hotplug: serialize pci_hp_register and pci_hp_deregisterKenji Kaneshige1-23/+28
Convert the pci_hotplug_slot_list_lock, which only protected the list of hotplug slots, to a pci_hp_mutex which now protects both interfaces. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI: update pci_create_slot() to take a 'hotplug' paramAlex Chiang2-2/+4
Slot detection drivers can co-exist with hotplug drivers. The names of the detected/claimed slots may be different depending on module load order. For legacy reasons, we need to allow hotplug drivers to override the slot name if a detection driver is loaded first (and they find the same slots). Creating and overriding slot names should be an atomic operation, otherwise you get a locking nightmare as various drivers race to call pci_create_slot(). pci_create_slot() is already serialized by grabbing the pci_bus_sem. We update the API and add a 'hotplug' param, which is: set if the caller is a hotplug driver NULL if the caller is a detection driver pci_create_slot() does not actually use the 'hotplug' parameter in this patch. A later patch will add the logic that uses it. Cc: kristen.c.accardi@intel.com Cc: matthew@wil.cx Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI: rename pci_update_slot_number to pci_renumber_slotAlex Chiang1-10/+5
The GPL exported symbol pci_update_slot_number has been renamed to pci_renumber_slot. Some of the safety checks were unnecessary and were removed. Cc: kristen.c.accardi@intel.com Cc: matthew@wil.cx Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI Hotplug core: add 'name' param pci_hp_register interfaceAlex Chiang10-16/+25
Update pci_hp_register() to take a const char *name parameter. The motivation for this is to clean up the individual hotplug drivers so that each one does not have to manage its own name. The PCI core should be the place where we manage the name. We update the interface and all callsites first, in a "no functional change" manner, and clean up the drivers later. Cc: kristen.c.accardi@intel.com Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI: add support for function level resetSheng Yang1-0/+98
Sometimes, it's necessary to enable software's ability to quiesce and reset endpoint hardware with function-level granularity, so provide support for it. The patch implement Function Level Reset(FLR) feature following PCI-e spec. And this is the first step. We would add more generic method, like D0/D3, to allow more devices support this function. The patch contains two functions. pcie_reset_function() is the new driver API, and, contains some action to quiesce a device. The other function is a helper: pcie_execute_reset_function() just executes the reset for a particular device function. Current the usage model is in KVM. Function reset is necessary for assigning device to a guest, or moving it between partitions. For Function Level Reset(FLR), please refer to PCI Express spec chapter 6.6.2. Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI: Fix reference counting bugMatthew Wilcox1-6/+3
pci_get_subsys() will decrement the reference count of the device that it starts searching from. Unfortunately, the pci_find_device() interface will already have decremented the reference count of the device earlier, so the device will end up losing all reference counts and be freed. We can fix this by incrementing the reference count of the device to start searching from before calling pci_get_subsys(). Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22ACPI/PCI: Set support bit for MSI in support field of _OSCTaku Izumi3-0/+26
Currently linux doesn't have any code to set the "MSI supported" bit in Support Fireld of _OSC. This patch adds the code for that. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22ACPI/PCI: Fix return value of acpi_cuery_osc()Taku Izumi1-4/+3
If acpi_query_osc() returns other than AE_OK, __pci_osc_support_set() stops scanning ACPI objects to evaluate _OSC. This prevents subsequent _OSCs from being evaluated if some of root bridge doesn't have _OSC, for example. So acpi_query_osc() should return always AE_OK to evaluate all _OSC. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22ACPI/PCI: Always query _OSC control field in pci_osc_control_set()Taku Izumi1-18/+13
In current pci_osc_control_set() implementation, once the _OSC control field is queried, it is never queried again. But the query result can change depending on the _OSC support field. For example, if PCI Express Native Hot Plug control depends on ASPM support on a certain platform, a PCI Express Native Hot Plug Control query would fail before the ASPM driver was loaded, but it would succeed if the ASPM driver was loaded first. Therefore, pci_osc_control_set() should query the _OSC control field every time. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22ACPI/PCI: Change pci_osc_control_set() to query control bits firstTaku Izumi1-16/+31
Current pci_osc_control_set() evaluates _OSC without query for control bits, unless __pci_osc_support_set() is called beforehand. But as strongly recommended in PCI firmware specification, it should query control bits first. This patch changes pci_osc_control_set() to query control bits first even if __pci_osc_support_set() is not called beforehand. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-05 00:20:22 +0000