summaryrefslogtreecommitdiff
path: root/arch/x86/xen
AgeCommit message (Collapse)AuthorFilesLines
2009-05-13xen: use header for EXPORT_SYMBOL_GPLRandy Dunlap1-0/+1
mmu.c needs to #include module.h to prevent these warnings: arch/x86/xen/mmu.c:239: warning: data definition has no type or storage class arch/x86/xen/mmu.c:239: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/x86/xen/mmu.c:239: warning: parameter names (without types) in function declaration [ Impact: cleanup ] Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-08xen: cache cr0 value to avoid trap'n'emulate for read_cr0Jeremy Fitzhardinge1-1/+17
stts() is implemented in terms of read_cr0/write_cr0 to update the state of the TS bit. This happens during context switch, and so is fairly performance critical. Rather than falling back to a trap-and-emulate native read_cr0, implement our own by caching the last-written value from write_cr0 (the TS bit is the only one we really care about). Impact: optimise Xen context switches Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-05-08xen/x86-64: clean up warnings about IST-using trapsJeremy Fitzhardinge1-2/+20
Ignore known IST-using traps. Aside from the debugger traps, they're low-level faults which Xen will handle for us, so the kernel needn't worry about them. Keep warning in case unknown trap starts using IST. Impact: suppress spurious warnings Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-05-08xen/x86-64: fix breakpoints and hardware watchpointsJeremy Fitzhardinge1-1/+18
Native x86-64 uses the IST mechanism to run int3 and debug traps on an alternative stack. Xen does not do this, and so the frames were being misinterpreted by the ptrace code. This change special-cases these two exceptions by using Xen variants which run on the normal kernel stack properly. Impact: avoid crash or bad data when IST trap is invoked under Xen Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-05-08xen: reserve Xen start_info rather than e820 reservingJeremy Fitzhardinge1-3/+3
Use reserve_early rather than e820 reservations for Xen start info and mfn->pfn table, so that the memory use is a bit more self-documenting. [ Impact: cleanup ] Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Xen-devel <xen-devel@lists.xensource.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <4A032EF1.6070708@goop.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-08Merge branch 'x86/urgent' into x86/xenIngo Molnar2-2/+12
Conflicts: arch/frv/include/asm/pgtable.h arch/x86/include/asm/required-features.h arch/x86/xen/mmu.c Merge reason: x86/xen was on a .29 base still, move it to a fresher branch and pick up Xen fixes as well, plus resolve conflicts Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-08x86: xen, i386: reserve Xen pagetablesJeremy Fitzhardinge1-0/+5
The Xen pagetables are no longer implicitly reserved as part of the other i386_start_kernel reservations, so make sure we explicitly reserve them. This prevents them from being released into the general kernel free page pool and reused. [ Impact: fix Xen guest crash ] Also-Bisected-by: Bryan Donlan <bdonlan@gmail.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Xen-devel <xen-devel@lists.xensource.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <4A032EEC.30509@goop.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-21clocksource: pass clocksource to read() callbackMagnus Damm1-1/+6
Pass clocksource pointer to the read() callback for clocksources. This allows us to share the callback between multiple instances. [hugh@veritas.com: fix powerpc build of clocksource pass clocksource mods] [akpm@linux-foundation.org: cleanup] Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: John Stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-13Merge branch 'for-rc1/xen/core' of ↵Linus Torvalds5-57/+157
git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen * 'for-rc1/xen/core' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen: xen: add FIX_TEXT_POKE to fixmap xen: honour VCPU availability on boot xen: clean up gate trap/interrupt constants xen: set _PAGE_NX in __supported_pte_mask before pagetable construction xen: resume interrupts before system devices. xen/mmu: weaken flush_tlb_other test xen/mmu: some early pagetable cleanups Xen: Add virt_to_pfn helper function x86-64: remove PGE from must-have feature list xen: mask XSAVE from cpuid NULL noise: arch/x86/xen/smp.c xen: remove xen_load_gdt debug xen: make xen_load_gdt simpler xen: clean up xen_load_gdt xen: split construction of p2m mfn tables from registration xen: separate p2m allocation from setting xen: disable preempt for leave_lazy_mmu
2009-04-09x86: fix set_fixmap to use phys_addr_tMasami Hiramatsu1-1/+1
Use phys_addr_t for receiving a physical address argument instead of unsigned long. This allows fixmap to handle pages higher than 4GB on x86-32. Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Acked-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-09xen: add FIX_TEXT_POKE to fixmapJeremy Fitzhardinge1-0/+3
FIX_TEXT_POKE[01] are used to map kernel addresses, so they're mapping pfns, not mfns. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-04-08xen: add FIX_TEXT_POKE to fixmapJeremy Fitzhardinge1-0/+3
FIX_TEXT_POKE[01] are used to map kernel addresses, so they're mapping pfns, not mfns. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-04-08xen: clean up gate trap/interrupt constantsJeremy Fitzhardinge1-3/+3
Use GATE_INTERRUPT/TRAP rather than 0xe/f. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-04-08xen: set _PAGE_NX in __supported_pte_mask before pagetable constructionJeremy Fitzhardinge1-1/+6
Some 64-bit machines don't support the NX flag in ptes. Check for NX before constructing the kernel pagetables. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-04-08xen/mmu: weaken flush_tlb_other testJeremy Fitzhardinge1-2/+2
Impact: fixes crashing bug There's no particular problem with getting an empty cpu mask, so just shortcut-return if we get one. Avoids crash reported by Christophe Saout <christophe@saout.de> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-04-08xen/mmu: some early pagetable cleanupsJeremy Fitzhardinge2-14/+28
1. make sure early-allocated ptes are pinned, so they can be later unpinned 2. don't pin pmd+pud, just make them RO 3. scatter some __inits around Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-04-08xen: mask XSAVE from cpuidJeremy Fitzhardinge1-6/+44
Xen leaves XSAVE set in cpuid, but doesn't allow cr4.OSXSAVE to be set. This confuses the kernel and it ends up crashing on an xsetbv instruction. At boot time, try to set cr4.OSXSAVE, and mask XSAVE out of cpuid it we can't. This will produce a spurious error from Xen, but allows us to support XSAVE if/when Xen does. This also factors out the cpuid mask decisions to boot time. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-04-08NULL noise: arch/x86/xen/smp.cHannes Eder1-2/+2
Fix this sparse warnings: arch/x86/xen/smp.c:316:52: warning: Using plain integer as NULL pointer arch/x86/xen/smp.c:421:60: warning: Using plain integer as NULL pointer Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-04-08xen: remove xen_load_gdt debugJeremy Fitzhardinge1-3/+0
Don't need the noise. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-04-08xen: make xen_load_gdt simplerJeremy Fitzhardinge1-8/+6
Remove use of multicall machinery which is unused (gdt loading is never performance critical). This removes the implicit use of percpu variables, which simplifies understanding how the percpu code's use of load_gdt interacts with this code. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-04-08xen: clean up xen_load_gdtJeremy Fitzhardinge1-2/+13
Makes the logic a bit clearer. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-04-08xen: split construction of p2m mfn tables from registrationJeremy Fitzhardinge1-1/+6
Build the p2m_mfn_list_list early with the rest of the p2m table, but register it later when the real shared_info structure is in place. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-04-08xen: separate p2m allocation from settingJeremy Fitzhardinge2-17/+47
When doing very early p2m setting, we need to separate setting from allocation, so split things up accordingly. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-04-08xen: disable preempt for leave_lazy_mmuJeremy Fitzhardinge1-1/+0
xen_mc_flush() requires preemption to be disabled for its own sanity, so disable it while we're flushing. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-04-07Merge commit 'origin/master' into for-linus/xen/masterJeremy Fitzhardinge2-7/+6
* commit 'origin/master': (4825 commits) Fix build errors due to CONFIG_BRANCH_TRACER=y parport: Use the PCI IRQ if offered tty: jsm cleanups Adjust path to gpio headers KGDB_SERIAL_CONSOLE check for module Change KCONFIG name tty: Blackin CTS/RTS Change hardware flow control from poll to interrupt driven Add support for the MAX3100 SPI UART. lanana: assign a device name and numbering for MAX3100 serqt: initial clean up pass for tty side tty: Use the generic RS485 ioctl on CRIS tty: Correct inline types for tty_driver_kref_get() splice: fix deadlock in splicing to file nilfs2: support nanosecond timestamp nilfs2: introduce secondary super block nilfs2: simplify handling of active state of segments nilfs2: mark minor flag for checkpoint created by internal operation nilfs2: clean up sketch file nilfs2: super block operations fix endian bug ... Conflicts: arch/x86/include/asm/thread_info.h arch/x86/lguest/boot.c drivers/xen/manage.c
2009-03-30Merge branch 'linus' into cpumask-for-linusIngo Molnar1-4/+3
Conflicts: arch/x86/kernel/cpu/common.c
2009-03-30xen: clean up gate trap/interrupt constantsJeremy Fitzhardinge1-3/+3
Use GATE_INTERRUPT/TRAP rather than 0xe/f. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-03-30xen: set _PAGE_NX in __supported_pte_mask before pagetable constructionJeremy Fitzhardinge1-1/+6
Some 64-bit machines don't support the NX flag in ptes. Check for NX before constructing the kernel pagetables. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-03-30xen/mmu: weaken flush_tlb_other testJeremy Fitzhardinge1-2/+2
Impact: fixes crashing bug There's no particular problem with getting an empty cpu mask, so just shortcut-return if we get one. Avoids crash reported by Christophe Saout <christophe@saout.de> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-03-30xen/mmu: some early pagetable cleanupsJeremy Fitzhardinge2-14/+28
1. make sure early-allocated ptes are pinned, so they can be later unpinned 2. don't pin pmd+pud, just make them RO 3. scatter some __inits around Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-03-30xen: mask XSAVE from cpuidJeremy Fitzhardinge1-6/+44
Xen leaves XSAVE set in cpuid, but doesn't allow cr4.OSXSAVE to be set. This confuses the kernel and it ends up crashing on an xsetbv instruction. At boot time, try to set cr4.OSXSAVE, and mask XSAVE out of cpuid it we can't. This will produce a spurious error from Xen, but allows us to support XSAVE if/when Xen does. This also factors out the cpuid mask decisions to boot time. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-03-30NULL noise: arch/x86/xen/smp.cHannes Eder1-2/+2
Fix this sparse warnings: arch/x86/xen/smp.c:316:52: warning: Using plain integer as NULL pointer arch/x86/xen/smp.c:421:60: warning: Using plain integer as NULL pointer Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-03-30xen: remove xen_load_gdt debugJeremy Fitzhardinge1-3/+0
Don't need the noise. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-03-30xen: make xen_load_gdt simplerJeremy Fitzhardinge1-8/+6
Remove use of multicall machinery which is unused (gdt loading is never performance critical). This removes the implicit use of percpu variables, which simplifies understanding how the percpu code's use of load_gdt interacts with this code. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-03-30xen: clean up xen_load_gdtJeremy Fitzhardinge1-2/+13
Makes the logic a bit clearer. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-03-30xen: split construction of p2m mfn tables from registrationJeremy Fitzhardinge1-1/+6
Build the p2m_mfn_list_list early with the rest of the p2m table, but register it later when the real shared_info structure is in place. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-03-29xen: separate p2m allocation from settingJeremy Fitzhardinge2-17/+47
When doing very early p2m setting, we need to separate setting from allocation, so split things up accordingly. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-03-29xen: disable preempt for leave_lazy_mmuJeremy Fitzhardinge1-0/+2
xen_mc_flush() requires preemption to be disabled for its own sanity, so disable it while we're flushing. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2009-03-29x86/paravirt: allow preemption with lazy mmu modeJeremy Fitzhardinge1-7/+1
Impact: remove obsolete checks, simplification Lift restrictions on preemption with lazy mmu mode, as it is now allowed. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2009-03-29x86/paravirt: finish change from lazy cpu to context switch start/endJeremy Fitzhardinge1-6/+4
Impact: fix lazy context switch API Pass the previous and next tasks into the context switch start end calls, so that the called functions can properly access the task state (esp in end_context_switch, in which the next task is not yet completely current). Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2009-03-29x86/paravirt: flush pending mmu updates on context switchJeremy Fitzhardinge3-5/+9
Impact: allow preemption during lazy mmu updates If we're in lazy mmu mode when context switching, leave lazy mmu mode, but remember the task's state in TIF_LAZY_MMU_UPDATES. When we resume the task, check this flag and re-enter lazy mmu mode if its set. This sets things up for allowing lazy mmu mode while preemptible, though that won't actually be active until the next change. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2009-03-29x86/pvops: replace arch_enter_lazy_cpu_mode with arch_start_context_switchJeremy Fitzhardinge1-4/+1
Impact: simplification, prepare for later changes Make lazy cpu mode more specific to context switching, so that it makes sense to do more context-switch specific things in the callbacks. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2009-03-19x86: with the last user gone, remove set_pte_presentJeremy Fitzhardinge1-1/+0
Impact: cleanup set_pte_present() is no longer used, directly or indirectly, so remove it. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Xen-devel <xen-devel@lists.xensource.com> Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Alok Kataria <akataria@vmware.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Avi Kivity <avi@redhat.com> LKML-Reference: <1237406613-2929-2-git-send-email-jeremy@goop.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-14x86: add brk allocation for very, very early allocationsJeremy Fitzhardinge1-3/+3
Impact: new interface Add a brk()-like allocator which effectively extends the bss in order to allow very early code to do dynamic allocations. This is better than using statically allocated arrays for data in subsystems which may never get used. The space for brk allocations is in the bss ELF segment, so that the space is mapped properly by the code which maps the kernel, and so that bootloaders keep the space free rather than putting a ramdisk or something into it. The bss itself, delimited by __bss_stop, ends before the brk area (__brk_base to __brk_limit). The kernel text, data and bss is reserved up to __bss_stop. Any brk-allocated data is reserved separately just before the kernel pagetable is built, as that code allocates from unreserved spaces in the e820 map, potentially allocating from any unused brk memory. Ultimately any unused memory in the brk area is used in the general kernel memory pool. Initially the brk space is set to 1MB, which is probably much larger than any user needs (the largest current user is i386 head_32.S's code to build the pagetables to map the kernel, which can get fairly large with a big kernel image and no PSE support). So long as the system has sufficient memory for the bootloader to reserve the kernel+1MB brk, there are no bad effects resulting from an over-large brk. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2009-03-13cpumask: use new cpumask functions throughout x86Rusty Russell1-3/+3
Impact: cleanup 1) &cpu_online_map -> cpu_online_mask 2) first_cpu/next_cpu_nr -> cpumask_first/cpumask_next 3) cpu_*_map manipulation -> init_cpu_* / set_cpu_* Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-04Merge branch 'x86/core' into core/percpuIngo Molnar1-0/+3
2009-03-02xen: deal with virtually mapped percpu dataJeremy Fitzhardinge3-5/+18
The virtually mapped percpu space causes us two problems: - for hypercalls which take an mfn, we need to do a full pagetable walk to convert the percpu va into an mfn, and - when a hypercall requires a page to be mapped RO via all its aliases, we need to make sure its RO in both the percpu mapping and in the linear mapping This primarily affects the gdt and the vcpu info structure. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Xen-devel <xen-devel@lists.xensource.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-26Merge branch 'x86/urgent' into x86/coreIngo Molnar1-0/+3
Conflicts: arch/x86/mach-voyager/voyager_smp.c
2009-02-25xen: disable interrupts early, as start_kernel expectsJeremy Fitzhardinge1-0/+3
This avoids a lockdep warning from: if (DEBUG_LOCKS_WARN_ON(unlikely(!early_boot_irqs_enabled))) return; in trace_hardirqs_on_caller(); Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Mark McLoughlin <markmc@redhat.com> Cc: Xen-devel <xen-devel@lists.xensource.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-24Merge branches 'x86/acpi', 'x86/apic', 'x86/asm', 'x86/cleanups', 'x86/mm', ↵Ingo Molnar16-1237/+1186
'x86/signal' and 'x86/urgent'; commit 'v2.6.29-rc6' into x86/core
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-30 01:46:10 +0000