summaryrefslogtreecommitdiff
path: root/arch/sh/lib
AgeCommit message (Collapse)AuthorFilesLines
2010-05-24arch/sh/lib/strlen.S: Checkpatch cleanupAndrea Gelmini1-1/+1
arch/sh/lib/strlen.S:38: ERROR: trailing whitespace Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-03-01arch/sh/lib/libgcc.h: Checkpatch cleanupAndrea Gelmini1-2/+1
arch/sh/lib/libgcc.h:21: ERROR: open brace '{' following union go on the same line Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-24sh: Optimised memset for SH4Stuart Menefy2-2/+112
Optimised version of memset for the SH4 which uses movca.l. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-08sh: Kill off dcache writeback from copy_page().Paul Mundt1-8/+3
Now that the cache purging is handled manually by all copy_page() callers, we can kill off copy_page()'s on writeback. This optimizes the non-aliasing case. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-01Merge branch 'master' into sh/smpPaul Mundt2-3/+4
Conflicts: arch/sh/mm/cache-sh4.c
2009-08-24sh: Fix underflow in SH udelay() code.Stuart Menefy1-2/+3
Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-24sh: Remove implicit sign extension from assembler immediatesStuart Menefy1-1/+1
The SH instruction set has several instructions which accept an 8 bit immediate operand. For logical instructions this operand is zero extended, for arithmetic instructions the operand is sign extended. After adding an option to the assembler to check this, it was found that several pieces of assembly code were assuming this behaviour, and in one case getting it wrong. So this patch explicitly sign extends any immediate operands, which makes it obvious what is happening, and fixes the one case which got it wrong. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-27sh: Rename arch/sh/lib/clear_page.S -> __clear_user.S.Paul Mundt2-1/+1
Now that this only contains the __clear_user() function, rename it accordingly. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-27sh: wire up clear_user_highpage() for sh4, convert sh7705.Paul Mundt1-46/+0
This wires up clear_user_highpage() on SH-4 and subsequently converts the SH7705 32kB cache mode over to using it. Now that the SH-4 implementation handles all of the dcache purging directly in the aliasing case, there is no need to do this in the default clear_page() implementation. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-11sh: Fix up stack overflow check with ftrace disabled.Paul Mundt1-36/+40
Presently the STACK_CHECK() code is called in to multiple times, although it's only necessary from the mcount entry. The code still attempts to treat the nop case as an ftrace path resulting in superfluous code flow for the case where ftrace is disabled. And finally, this also fixes up references to a few undefined symbols when FUNCTION_TRACER=n. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-11sh: Fix up ftrace build error when STACK_DEBUG=n.Paul Mundt1-3/+4
Presently the closest reference to function_trace_stop is within a CONFIG_STACK_DEBUG block. When this is turned off, the build bails out with a pcrel too far error. Reorder things a bit to handle the various combinations. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-11sh: Decouple mcount from ftrace.Paul Mundt1-2/+1
This adds a general CONFIG_MCOUNT in order to permit mcount generation without ftrace support. This is primarily for allowing platforms to enable aggressive stack overflow checking without having to enable ftrace support. Based on the sparc64 implementation. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-11sh: Function graph tracer supportMatt Fleming2-1/+117
Add both dynamic and static function graph tracer support for sh. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-11sh: Provide diagnostic kernel stack checksMatt Fleming1-0/+85
Enable kernel stack checking code in both the dynamic ftrace and mcount code paths. Check the stack to see if it's overflowing and make sure that the stack pointer contains an address that's either in init_stack or after the bss. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-06sh: Add ftrace syscall tracing supportMatt Fleming1-1/+1
Now that I've added TIF_SYSCALL_FTRACE the thread flags do not fit into a single byte any more. Code testing them now needs to be aware of the upper and lower bytes. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-07-06sh: Define HAVE_FUNCTION_TRACE_MCOUNT_TESTMatt Fleming1-1/+16
Enable HAVE_FUNCTION_TRACE_MCOUNT_TEST and test the value of function_trace_stop from our assembly code as opposed to using the generic C function. This should optimise our mcount/ftrace code path. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-01-29sh: Handle calling csum_partial with misaligned dataStuart Menefy1-19/+50
In rare circumstances csum_partial() can be called with data which is not 16 or 32 bit aligned. This is been observed with RPC calls for NFS file systems for example. Add support for handling this without resorting to the misaligned fixup code (which is why this hasn't been seen as a problem). This mimics the i386 version, which has had this support for some time. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Add plain udivsi3 (not _i4*) for gcc-4.1 and lower.Takashi YOSHII4-629/+713
We chan't share code for udivsi3 and udivsi3_i4, because they have a different clobber list. Copy udivsi3 from gcc-4.1.2. As shown in arch/sh/lib/udivsi3.S (and -Os.S), .global __udivsi3_i4i .global __udivsi3_i4 .global __udivsi3 __udivsi3_i4i: ... Three symbols are sharing one code, which is actually udivsi3_i4i. But, this results unwanted code with gcc 4.1. In gcc, these three are treated as pseudo instructions that have their own clobber list apart from the usual calling convention. According to sh's machine description. The clobber list is as follows: - udivsi3_i4i : t,r1,pr,mach,macl - udivsi3_i4 : t,r0,r1,r4,r5,pr,dr0,dr2,dr4 - udivsi3 : t,r4,pr The caller of udivsi3 will be left with a broken r1 and mac*. gcc-4.1.x and older(at least to 3.4) generate udivsi3. ST's gcc-4.1.1 seems to be OK because it has _i4i. Signed-off-by: Takashi YOSHII <yoshii.takashi@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Add exports for __udivsi3/__sdivsi3 and the _i4 versions.Paul Mundt2-0/+8
Needed by older compilers. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Migrate necessary libgcc bits in to arch/sh/lib for SUPERH32.Paul Mundt13-1/+1978
This moves in the necessary libgcc bits for SUPERH32 and drops the libgcc linking for the regular targets. This in turn allows us to rip out quite a few hacks both in sh_ksyms_32 and arch/sh/Makefile. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: dynamic ftrace support.Matt Fleming2-0/+91
First cut at dynamic ftrace support. Signed-off-by: Matt Fleming <mjf@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-11-13sh: __copy_user function can corrupt the stack in case of exceptionStuart MENEFY1-3/+8
The __copy_user function can corrupt the stack in the case of a non-trivial length of data, and either of the first two move instructions cause an exception. This is because the fixup for these two instructions is mapped to the no_pop case, but these instructions execute after the stack is pushed. This change creates an explicit NO_POP exception mapping macro, and uses it for the two instructions executed in the trivial case where no stack pushes occur. More information at ST Linux bugzilla: https://bugzilla.stlinux.com/show_bug.cgi?id=4824 Signed-off-by: Dylan Reid <dylan_reid@bose.com> Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-01sh: Fix up the __raw_read/writeX() definitions.Paul Mundt1-4/+4
These were doing largely bogus things and using the wrong typing for the address. Bring these in line with the ARM definitions. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-08sh: fixup many sparse errors.Paul Mundt1-0/+1
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-07-28move arch/sh/lib/io.o to obj-yAdrian Bunk1-1/+3
EXPORT_SYMBOL's in lib-y considered harmful: <-- snip --> ... MODPOST 1837 modules ERROR: "__raw_readsl" [drivers/ssb/ssb.ko] undefined! ERROR: "__raw_writesl" [drivers/ssb/ssb.ko] undefined! ERROR: "__raw_writesl" [drivers/net/smc91x.ko] undefined! ERROR: "__raw_readsl" [drivers/net/smc91x.ko] undefined! ERROR: "__raw_writesl" [drivers/net/3c59x.ko] undefined! ERROR: "__raw_readsl" [drivers/net/3c59x.ko] undefined! ... make[2]: *** [__modpost] Error 1 <-- snip --> Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-16sh: Fix up optimized SH-4 memcpy on big endian.Hideo Saito1-11/+11
Signed-off-by: Hideo Saito <saito@densan.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18sh: Allow optimized clear/copy page routines to be used on SH-2.Paul Mundt2-6/+6
Presently these are restricted to SH-3 and SH-4, so we reorder the ifdefs a bit to let other parts use these also. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Explicit alignment for PAGE_SIZE in copy/clear_page().Paul Mundt2-1/+4
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Build fixes for lib32 clear_page.Paul Mundt1-3/+3
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: clear/copy_page renames in lib and lib64.Paul Mundt3-1/+542
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28sh: Move sh32 optimized I/O routines to arch/sh/lib/Paul Mundt2-1/+83
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07sh: Add -Werror for clean directories.Paul Mundt1-0/+2
Follow the MIPS and sparc64 changes for -Werror instrumentation. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-13sh: Revert __xdiv64_32 size change.Paul Mundt1-2/+2
It's only __div64_32 that needs the fix, __xdiv64_32 behaves as expected with the original size. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-06sh: Correct __xdiv64_32/div64_32 return value size.Paul Mundt2-8/+7
These should be returning a uint32_t, whereas they were erroneously returning a u64 before. As the register sizes are 32-bits, this doesn't really make a lot of sense. Reported-by: Katsuya MATSUBARA <matsu@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-09sh: Fixup ndelay() xloops calculation for alternate HZ.kogiidena1-2/+3
Currently the xloops calculation in ndelay() gets set to 0 when calculated with HZ=250, fix up how we do the HZ factoring in order to get this right for differing values. Signed-off-by: kogiidena <kogiidena@eggplant.ddo.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-07sh: Kill off udivdi3 div64_32 wrapping.Paul Mundt2-19/+1
Previously we've been handling udivdi3 references and wrapping them in to div64_32() automatically. This doesn't get a lot of use, however, and as akpm noted in the recent thread on l-k: http://lkml.org/lkml/2007/2/27/241 we're better off simply ripping it out and going the do_div() route if there happen to be any places that need it. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-04-26[STRING]: Move strcasecmp/strncasecmp to lib/string.cDavid S. Miller2-27/+1
We have several platforms using local copies of identical code. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-27sh: Fix memcpy() build error on sh4eb.Nobuhiro Iwamatsu1-2/+2
A trivial bug breaking the build on sh4eb. Signed-off-by: Nobuhiro Iwamatsu <hemamu@t-base.ne.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27sh: Fix TCP payload csum bug in csum_partial_copy_generic().Ollie Wild1-1/+2
There's a bug in the Hitachi SuperH csum_partial_copy_generic() implementation. If the supplied length is 1 (and several alignment conditions are met), the function immediately branches to label 4. However, the assembly at label 4 expects the length to be stored in register r2. Since this has not occurred, subsequent behavior is undefined. This can cause bad payload checksums in TCP connections. I've fixed the problem by initializing register r2 prior to the branch instruction. Signed-off-by: Ollie Wild <aaw@rincewind.tv> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27sh: Fix a sign extension bug in memset().Toshinobu Sugioka1-0/+1
Minor sign-extension bug in SH-specific memset().. Signed-off-by: Toshinobu Sugioka <sugioka@itonet.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel1-1/+0
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2005-06-21[PATCH] smp_processor_id() cleanupIngo Molnar1-1/+1
This patch implements a number of smp_processor_id() cleanup ideas that Arjan van de Ven and I came up with. The previous __smp_processor_id/_smp_processor_id/smp_processor_id API spaghetti was hard to follow both on the implementational and on the usage side. Some of the complexity arose from picking wrong names, some of the complexity comes from the fact that not all architectures defined __smp_processor_id. In the new code, there are two externally visible symbols: - smp_processor_id(): debug variant. - raw_smp_processor_id(): nondebug variant. Replaces all existing uses of _smp_processor_id() and __smp_processor_id(). Defined by every SMP architecture in include/asm-*/smp.h. There is one new internal symbol, dependent on DEBUG_PREEMPT: - debug_smp_processor_id(): internal debug variant, mapped to smp_processor_id(). Also, i moved debug_smp_processor_id() from lib/kernel_lock.c into a new lib/smp_processor_id.c file. All related comments got updated and/or clarified. I have build/boot tested the following 8 .config combinations on x86: {SMP,UP} x {PREEMPT,!PREEMPT} x {DEBUG_PREEMPT,!DEBUG_PREEMPT} I have also build/boot tested x64 on UP/PREEMPT/DEBUG_PREEMPT. (Other architectures are untested, but should work just fine.) Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds13-0/+1980
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-24 10:08:17 +0000