summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)AuthorFilesLines
2010-02-26Merge branch 'v4l_for_linus' of ↵Linus Torvalds6-17/+224
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (362 commits) V4L-DVB: cx88-dvb: remove extra attribution for core V4L/DVB: v4l: soc_camera: fix bound checking of mbus_fmt[] index V4L/DVB: Add support for SMT7020 to cx88 V4L/DVB: radio-si470x: Use UTF-8 encoding on a comment V4L/DVB: MAINTAINERS: Telegent tlg2300 section fix V4L/DVB: gspca_stv06xx: Add support for camera button V4L/DVB: gspca_ov519: add support for the button on ov511 based cams V4L/DVB: gspca_ov519: Add support for the button on ov518 based cams V4L/DVB: gspca_ov519: add support for the button on ov519 based cams V4L/DVB: gspca_main: Fix a compile error when CONFIG_INPUT is not set V4L/DVB: gspca_main: some input error handling fixes V4L/DVB: gspca_main: Allow use of input device creation code for non int. inputs V4L/DVB: gspca_pac7302: much improved exposure control V4L/DVB: gspca_sonixb: Make sonixb driver handle pas106 and pas202 cameras V4L/DVB: gspca_sonixb: pas106: fixup bright ctrl and add gain and exposure ctrls V4L/DVB: Documentation: gspca.txt: update known mr97310a cams V4L/DVB: gspca_mr97310a: add support for the Sakar 1638x CyberPix V4L/DVB: gscpa_sonixb: limit ov7630 max framerate at 640x480 V4L/DVB: gspca_sonixb: pas202: fixup brightness ctrl and add gain and exposure ctrls V4L/DVB: gscpa_sonixb: Differentiate between sensors with a coarse and fine expo ctrl ...
2010-02-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/xfs-viptLinus Torvalds1-0/+10
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/xfs-vipt: xfs: fix xfs to work with Virtually Indexed architectures sh: add mm API for DMA to vmalloc/vmap areas arm: add mm API for DMA to vmalloc/vmap areas parisc: add mm API for DMA to vmalloc/vmap areas mm: add coherence API for DMA to vmalloc/vmap areas
2010-02-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds1-0/+8
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (31 commits) crypto: aes_generic - Fix checkpatch errors crypto: fcrypt - Fix checkpatch errors crypto: ecb - Fix checkpatch errors crypto: des_generic - Fix checkpatch errors crypto: deflate - Fix checkpatch errors crypto: crypto_null - Fix checkpatch errors crypto: cipher - Fix checkpatch errors crypto: crc32 - Fix checkpatch errors crypto: compress - Fix checkpatch errors crypto: cast6 - Fix checkpatch errors crypto: cast5 - Fix checkpatch errors crypto: camellia - Fix checkpatch errors crypto: authenc - Fix checkpatch errors crypto: api - Fix checkpatch errors crypto: anubis - Fix checkpatch errors crypto: algapi - Fix checkpatch errors crypto: blowfish - Fix checkpatch errors crypto: aead - Fix checkpatch errors crypto: ablkcipher - Fix checkpatch errors crypto: pcrypt - call the complete function on error ...
2010-02-26V4L/DVB: DaVinci - Adding platform & board changes for vpfe capture on DM365Murali Karicheri3-1/+174
This patch adds following changes:- 1) add sub device configuration data for TVP5146 used by vpfe capture 2) registers platform devices for vpfe_capture, isif and vpss 3) defines hardware resources for the devices listed under 2) 4) defines clock aliase for isif driver 5) adding setup_pinmux() for isif Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Murali Karicheri <mkaricheri@gmail.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26pxa_camera: remove init() callbackAntonio Ospite1-2/+0
pxa_camera init() callback is sometimes abused to setup MFP for PXA CIF, or even to request GPIOs to be used by the camera *sensor*. These initializations can be performed statically in machine init functions. The current semantics for this init() callback is ambiguous anyways, it is invoked in pxa_camera_activate(), hence at device node open, but its users use it like a generic initialization to be done at module init time (configure MFP, request GPIOs for *sensor* control). Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-26V4L/DVB: vpfe-capture: converting ccdc drivers to platform-driversMuralidharan Karicheri2-14/+50
This adds platform code for ccdc driver on DM355 and DM6446. 1) new ccdc platform devices added 2) added clock aliases master and slave for CCDC clocks 3) added dm355_ccdc_setup_pinmux() pin-mux setup hook in dm355 ccdc driver platform data Reviewed-by: Vaibhav Hiremath <hvaibhav@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-02-22resource/PCI: mark struct resource as constDominik Brodowski1-1/+1
Now that we return the new resource start position, there is no need to update "struct resource" inside the align function. Therefore, mark the struct resource as const. Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22resource/PCI: align functions now return start of resourceDominik Brodowski1-3/+5
As suggested by Linus, align functions should return the start of a resource, not void. An update of "res->start" is no longer necessary. Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-20Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds1-7/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: omap: Remove DEBUG_FS dependency for mux name checking
2010-02-20ARM: allow alignment fault mode to be configured at kernel bootRussell King1-0/+3
Some glibc versions intentionally create lots of alignment faults in their gconv code, which if not fixed up, results in segfaults during boot. This can prevent systems booting properly. There is no clear hard-configurable default for this; the desired default depends on the nature of the userspace which is going to be booted. So, provide a way for the alignment fault handler to be configured via the kernel command line. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-20ARM: Update mach-typesRussell King1-2/+44
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-20ARM: 5950/1: ARM: Fix build error for arm1026ej-s processorAbdoulaye Walsimou Gaye1-1/+2
This patch fix the below build error for arm1026ej-s processor (IntegratorCP/arm1026ej-s board). CC init/main.o In file included from include/linux/highmem.h:8, from include/linux/pagemap.h:10, from include/linux/mempolicy.h:62, from init/main.c:52: arch/arm/include/asm/cacheflush.h:134:2: error: #error Unknown cache maintainence model make[1]: *** [init/main.o] Erreur 1 make: *** [init] Erreur 2 Signed-off-by: Abdoulaye Walsimou Gaye <walsimou@walsimou.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-18Merge branch 'for-rmk' of git://gitorious.org/linux-gemini/mainlineRussell King1-2/+2
2010-02-18Gemini: wrong registers used to set reg_level in gpio_set_irq_type()Roel Kluin1-2/+2
It appears the wrong GPIO registers were used Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
2010-02-18ARM: 5938/1: ARM: L2: export outer_cache_fnsSantosh Shilimkar1-0/+1
The 'outer_cache' variable is needed by the outer_inv_range(), outer_clean_range() and outer_flush_range() functions, which are declared as inline in asm/cacheflush.h. Otherwise drivers built as a loadable module, which access these functions, will have an undefined symbol. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-17omap: Remove DEBUG_FS dependency for mux name checkingRanjith Lohithakshan1-7/+5
The check for a valid mux name should be performed regardless of whether DEBUG_FS is enabled or not. Otherwise without DEBUG_FS, we get: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] last sysfs file: Modules linked in: CPU: 0 Not tainted (2.6.33-rc8 #10) PC is at strcmp+0x18/0x40 LR is at omap_mux_init_signal+0x68/0x14c ... This fixes the issue currently seen with boards not booting up if DEBUG_FS is not enabled in defconfig. Note that the earlier ifndef + ifdef now becomes simpler ifdef else: If CONFIG_OMAP_MUX is selected, we use pin names. If it's not selected, we only want the GPIO to mux register mapping. Signed-off-by: Ranjith Lohithakshan <ranjithl@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-10OMAP: hsmmc: fix memory leakAaro Koskinen1-1/+6
The platform data allocated with kmalloc() will become unreachable once the init is complete, so it should be freed. The problem was discovered by kmemleak. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Acked-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-05arm: add mm API for DMA to vmalloc/vmap areasJames Bottomley1-0/+10
ARM cannot prevent cache movein, so this patch implements both the flush and invalidate pieces of the API. Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-02-04Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds12-30/+195
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: Fix wrong register in proc-arm6_7.S data abort handler ARM: 5909/1: ARM: Correct the FPSCR bits setting when raising exceptions ARM: 5904/1: ARM: Always generate the IT instruction when compiling for Thumb-2 ARM: 5907/1: ARM: Fix the reset on the RealView PBX Development board mx35: add a missing comma in a pad definition mx25: make the FEC AHB clk secondary of the IPG mx25: fix time accounting mx25: properly initialize clocks mx25: remove unused mx25_clocks_init() argument i.MX25: implement secondary clocks for uarts and fec i.MX25: Allow secondary clocks in DEFINE_CLOCK ARM: MX3: Fixed typo in declared enum type name. MXC: Add AUDMUXv2 register decode to debugfs mx31ads: Provide an IRQ range to the WM835x on the 1133-EV1 module mx31ads: Provide a name for EXPIO interrupt chip mx31ads: Allow enable/disable of switchable supplies
2010-02-03omap: Disable serial port autoidle by defaultTony Lindgren1-2/+9
Currently the omap serial clocks are autoidled after 5 seconds. However, this causes lost characters on the serial ports. As this is considered non-standard behaviour for Linux, disable the timeout. Note that this will also cause blocking of any deeper omap sleep states. To enable the autoidling of the serial ports, do something like this for each serial port: # echo 5 > /sys/devices/platform/serial8250.0/sleep_timeout # echo 5 > /sys/devices/platform/serial8250.1/sleep_timeout ... Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-03omap: Fix access to already released memory in clk_debugfs_register_one()Marek Skuczynski1-2/+2
I have found an access to already released memory in clk_debugfs_register_one() function. Signed-off-by: Marek Skuczynski <mareksk7@gmail.com> Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-03omap: Fix arch/arm/mach-omap2/mux.c: Off by one errorTony Lindgren1-1/+2
David Binderman ran the sourceforge tool cppcheck over the source code of the new Linux kernel 2.6.33-rc6: [./arm/mach-omap2/mux.c:492]: (error) Buffer access out-of-bounds 13 characters + 1 digit + 1 zero byte is more than 14 characters. Also add a comment on mode0 name length in case new omaps start using longer names. Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-03omap: Fix 3630 mux errorsTony Lindgren2-0/+54
3630 has more mux signals than 34xx. The additional pins exist in omap36xx_cbp_subset, but are not initialized as the superset is missing these offsets. This causes the following errors during the boot: mux: Unknown entry offset 0x236 mux: Unknown entry offset 0x22e mux: Unknown entry offset 0x1ec mux: Unknown entry offset 0x1ee mux: Unknown entry offset 0x1f4 mux: Unknown entry offset 0x1f6 mux: Unknown entry offset 0x1f8 mux: Unknown entry offset 0x1fa mux: Unknown entry offset 0x1fc mux: Unknown entry offset 0x22a mux: Unknown entry offset 0x226 mux: Unknown entry offset 0x230 mux: Unknown entry offset 0x22c mux: Unknown entry offset 0x228 Fix this by adding the missing offsets to omap3 superset. Note that additionally the uninitialized pins need to be skipped on 34xx. Based on an earlier patch by Allen Pais <allen.pais@ti.com>. Reported-by: Allen Pais <allen.pais@ti.com> Signed-off-by: Allen Pais <allen.pais@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-03OMAP2/3: GPMC: ensure valid clock pointerKevin Hilman1-1/+4
Ensure valid clock pointer during GPMC init. Fixes compiler warning about potential use of uninitialized variable. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-03OMAP2/3: IRQ: ensure valid base addressKevin Hilman1-1/+3
Ensure valid base address during IRQ init. Fixes compiler warning about potential use of uninitialized variable. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-03ARCH OMAP : enable ARCH_HAS_HOLES_MEMORYMODEL for OMAPSriram1-0/+1
OMAP platforms(like OMAP3530) include DSP or other co-processors for media acceleration. when carving out memory for the accelerators we can end up creating a hole in the memory map of sort: <kernel memory><hole(memory for accelerator)><kernel memory> To handle such a memory configuration ARCH_HAS_HOLES_MEMORYMODEL has to be enabled. For further information refer discussion at: http://www.mail-archive.com/linux-omap@vger.kernel.org/msg15262.html. Signed-off-by: Sriramakrishnan <srk@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-03omap: Remove old unused defines for OMAP_32KSYNCT_BASETony Lindgren1-10/+0
Remove old unused defines for OMAP_32KSYNCT_BASE Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-03ARM: Fix wrong register in proc-arm6_7.S data abort handlerRussell King1-1/+1
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-02-01Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6Russell King8-25/+187
2010-02-01ARM: 5909/1: ARM: Correct the FPSCR bits setting when raising exceptionsCatalin Marinas1-1/+4
Commit c98929c07a removed the clearing of the FPSCR[31:28] bits from the vfp_raise_exceptions() function and the new bits are or'ed with the old FPSCR bits leading to unexpected results (the original commit was referring to the cumulative bits - FPSCR[4:0]). Reported-by: Tom Hameenanttila <tmhameen@marvell.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-30ARM: 5904/1: ARM: Always generate the IT instruction when compiling for Thumb-2Catalin Marinas1-1/+1
Current behaviour is to generate the IT instruction only for Thumb-2 code. However, the kernel helpers in entry-armv.S are compiled to ARM in a unified syntax file (if THUMB2_KERNEL). Recent compilers warn about missing IT instruction in unified assembly syntax files. The patch changes the "-mimplicit-it" gas option to "always". Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-30ARM: 5907/1: ARM: Fix the reset on the RealView PBX Development boardColin Tuckley1-2/+2
Signed-off-by: Colin Tuckley <colin.tuckley@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-29omap: define _toggle_gpio_edge_triggering only for OMAP1Uwe Kleine-König1-2/+2
The only usage of _toggle_gpio_edge_triggering is in an #ifdef CONFIG_ARCH_OMAP1 block, so only provide it if CONFIG_ARCH_OMAP1 is defined, too. This fixes a compiler warning: arch/arm/plat-omap/gpio.c:758: warning: '_toggle_gpio_edge_triggering' defined but not used when compiling for ARCH_OMAP2, ARCH_OMAP3 or ARCH_OMAP4. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-01-29mx35: add a missing comma in a pad definitionUwe Kleine-König1-1/+1
Reported-by: Tim Sander <tstone@vlsi.informatik.tu-darmstadt.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-28[ARM] Update mach-typesRussell King1-1/+59
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-01-28Merge branch 'fix' of ↵Russell King3-6/+15
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
2010-01-27Merge branch 'for-rmk' of git://git.marvell.com/orionRussell King4-6/+118
2010-01-26mx25: make the FEC AHB clk secondary of the IPGBaruch Siach1-2/+2
This makes the FEC clock configuration consistent with the UART one. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-26mx25: fix time accountingBaruch Siach1-1/+6
The gpt_clk rate function doesn't consider the PER divider. This causes a significant drift in time accounting. Fix this by introducing the correct rate calculation function. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-26mx25: properly initialize clocksBaruch Siach1-0/+8
This patch disables all unnecessary clock in mx25_clocks_init() to make a clean start, the same as is being done for the rest of the i.MX chips. This patch was tested on i.MX25 PDK. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-26mx25: remove unused mx25_clocks_init() argumentBaruch Siach3-3/+3
The fref is needless on mx25 since the reference clock is fixed at 24MHz. Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-26i.MX25: implement secondary clocks for uarts and fecSascha Hauer1-6/+8
For uarts and fec need two clocks, implement it using the secondary clock field in struct clk. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-26i.MX25: Allow secondary clocks in DEFINE_CLOCKSascha Hauer1-20/+21
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-01-25Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds23-131/+229
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (25 commits) OMAP2/3: DMTIMER: Clear pending interrupts when stopping a timer PM debug: Fix warning when no CONFIG_DEBUG_FS OMAP3: PM: DSS PM_WKEN to refill DMA OMAP: timekeeping: time should not stop during suspend OMAP3: PM: Force write last pad config register into save area OMAP: omap3_pm_get_suspend_state() error ignored in pwrdm_suspend_get() OMAP3: PM: Enable wake-up from McBSP2, 3 and 4 modules OMAP3: PM debug: fix build error when !CONFIG_DEBUG_FS OMAP3: PM: Removing redundant and potentially dangerous PRCM configration OMAP3: Fixed ARM aux ctrl register save/restore OMAP3: CPUidle: Fixed timer resolution OMAP3: PM: Remove duplicate code blocks OMAP3: PM: Disable interrupt controller AUTOIDLE before WFI OMAP3: PM: Enable system control module autoidle OMAP3: PM: Ack pending interrupts before entering suspend omap: Enable GPMC clock in gpmc_init OMAP1 clock: fix for "BUG: spinlock lockup on CPU#0" OMAP4: clocks: Fix the clksel_rate struct DPLL divs OMAP4: PRCM: Fix the base address for CHIRONSS reg defines OMAP: dma_chan[lch_head].flag & OMAP_DMA_ACTIVE tested twice in omap_dma_unlink_lch() ...
2010-01-24[ARM] orion5x: D-link DNS-323 rev. B1 power-offErik Benada1-6/+27
This patch fixes power LED blinking and power-off on DNS-323 rev. B1. GPIO pin 3 has to be set to 1 to stop power LED blinking and to allow the LED to be controlled via leds-gpio. This pin has to be also set to 1 for power-off to work. To power-off the rev. B1 machine, pin 8 has to be set to 1 and then set to 0 to do actual power-off. Tested on my DNS-323 rev. B1 Signed-off-by: Erik Benada <erikbenada@yahoo.ca> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2010-01-21OMAP2/3: DMTIMER: Clear pending interrupts when stopping a timerTero Kristo1-0/+13
OMAP GP timers keep running for a few cycles after they are stopped, which can cause the timer to expire and generate an interrupt. The pending interrupt will prevent e.g. OMAP from entering suspend, thus we ack it manually. Only applicable on OMAP2/3/4. Signed-off-by: Tero Kristo <tero.kristo@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-01-21Merge branch 'for-linus/samsung' of git://git.fluff.org/bjdooks/linuxLinus Torvalds1-1/+1
* 'for-linus/samsung' of git://git.fluff.org/bjdooks/linux: hmt: adjust for new pwm_backlight->notify prototype
2010-01-22hmt: adjust for new pwm_backlight->notify prototypePeter Korsgaard1-1/+1
Commit cfc38999f (backlight: Pass device through notify callback) added a struct device argument to the notify callback, but didn't update the user of it in mach-hmt.c Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-21Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds12-57/+110
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 5888/1: arm: Update comments in cacheflush.h and remove unnecessary V6 and V7 comments ARM: 5886/1: arm: Fix cpu_proc_fin() for proc-v7.S and make kexec work ARM: 5885/1: arm: Flush TLB entries in setup_mm_for_reboot() ARM: 5884/1: arm: Fix DCC console for v7 ARM: 5883/1: Revert "disable NX support for OABI-supporting kernels" ARM: 5882/1: ARM: Fix uncompress code compile for different defines of flush(void) ARM: fix badly placed mach/plat entries in Kconfig & Makefile
2010-01-21ARM: MX3: Fixed typo in declared enum type name.Vladimir Zapolskiy1-1/+1
To distinguish between mx31lite and mx31lilly boards better to use different enum types. Signed-off-by: Vladimir Zapolskiy <vzapolskiy@gmail.com> Acked-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 05:56:27 +0000