summaryrefslogtreecommitdiff
path: root/arch/arm/plat-mxc/Makefile
AgeCommit message (Collapse)AuthorFilesLines
2011-06-06gpio/mxc: Move Freescale MXC gpio driver to drivers/gpioShawn Guo1-1/+1
GPIO drivers are getting moved to drivers/gpio for cleanup and consolidation. This patch moves the plat-mxc driver. Follow up patches will clean it up and make it a fine upstanding gpio driver. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-02-11ARM i.MX ehci: do ehci init in board specific functionsSascha Hauer1-1/+0
The mxc-ehci driver calls SoC specific phy initialization right after calling board specific initialization. To offer greater flexibility for boards to setup the phy and to get rid of some unnecessary flags in platform data this patch lets the boards call the SoC specific phy initialization and remove it from the driver. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-12-14mx51: support FIQ on TZIC, revisedPeter Horton1-1/+1
Add support for FIQ on mx51 TZIC TZIC changes tested with FIQ audio on an mx51 board AVIC changes build with mx3_defconfig, not tested Signed-off-by: Peter Horton <phorton@bitbox.co.uk> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-11-24ARM i.MX irq: Compile avic irq code only on SoCs that need itSascha Hauer1-2/+3
This patch adds a Kconfig option for the avic irq controller and lets the SoCs that need it select this option. Also, as we have two irq controllers for i.MX, irq.c is not appropriate anymore, so rename it to avic.c Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-22cpufreq for freescale mx51Yong Shen1-0/+1
Currently, only two operating points: 160Mhz and 800Mhz. the operating points are tested on babbage 3.0 Signed-off-by: Yong Shen <yong.shen@linaro.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-10-19ARM: imx: Add iram allocator functionsDinh Nguyen1-0/+1
Add IRAM(Internal RAM) allocation functions using GENERIC_ALLOCATOR. The allocation size is 4KB multiples to guarantee alignment. The idea for these functions is for i.MX platforms to use them to dynamically allocate IRAM usage. Applies on 2.6.36-rc7 Signed-off-by: Dinh Nguyen <Dinh.Nguyen@freescale.com> Reviewed-by: Amit Kucheria <amit.kucheria@canonical.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-09-27ARM: imx: Add EPIT supportSascha Hauer1-0/+1
The Enhanced Periodic Interrupt Timer (EPIT) is found on newer i.MX SoCs and can be used as an alternative system timer. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-07-26mxc: add common debug board for 3-stack platformsJason Wang1-0/+1
The debug board is little different for all mxc 3-stack(PDK) platforms, it is possible here to add a common implementation to support this board. Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-06-30ARM: imx: Change the way nand devices are registered (generic part)Uwe Kleine-König1-0/+2
Instead of having a platform device defined in a devices.c and register it in the machine file allocate it dynamically. This reduces the size of needed memory as the new function is discarded after init and only the existing devices are created. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-06-30ARM: imx: new Kconfig symbol and feature test macro for DMA on mx1 and mx2Uwe Kleine-König1-2/+0
This should be used instead of hard coding the corresponding platforms. The feature test macro is needed to support different SOCs in a single kernel image. While at it rename dma-mx1-mx2 to dma-v1 as mx25 doesn't use it and so the mx2 part is wrong and move the header to arch/arm/mach-imx. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-03-08Merge branch 'origin' into devel-stableRussell King1-0/+4
Conflicts: arch/arm/mach-mx2/devices.c arch/arm/mach-mx2/devices.h sound/soc/pxa/pxa-ssp.c
2010-02-25Merge branch 'mxc-master' of git://git.pengutronix.de/git/imx/linux-2.6 into ↵Uwe Kleine-König1-0/+3
imx/master Removed selection of COMMON_CLKDEV by CONFIG_ARCH_MX5. This is handled in 03e09cd8902717b66f940357257d8ad76114d9f2. arch/arm/plat-mxc/iomux-mx1-mx2.c was moved to arch/arm/plat-mxc/iomux-v1.c in 5e2e95f520538e095d10456acd28d9107317aa32 and got bug fixed in 5c17ef878fa25e04b1e8f1d8f5fa8b267753472c. The bug in arch/arm/plat-mxc/iomux-v1.c isn't present any more since bac3fcfad565c9bbceeed8b607f140c29df97355, so arch/arm/plat-mxc/iomux-mx1-mx2.c is simply deleted. Conflicts: arch/arm/plat-mxc/Kconfig arch/arm/plat-mxc/Makefile arch/arm/plat-mxc/iomux-mx1-mx2.c Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-02-24arm/imx/iomux-v1: check for invalid modes in mxc_gpio_modeUwe Kleine-König1-1/+0
mxc_gpio_mode checks for invalid pins and so it returns zero for success, -EINVAL for invalid pins. While at it, remove definitions of GPIO_PORT_MAX removed as they are unused now. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-02-24arm/imx/iomux-v1: rename source file and reorganize Kconfig stuffUwe Kleine-König1-3/+4
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-02-24arm/imx/dma-v1: don't use deprecated symbols DMA_BASE and MXC_INT_DMACH0Uwe Kleine-König1-1/+0
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-02-24arm/imx/audmux-v2: use SoC-prefixed namesUwe Kleine-König1-1/+0
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-02-24arm/imx/audmux-v1: use SoC-prefixed namesUwe Kleine-König1-1/+0
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2010-02-09mxc: TrustZone interrupt controller (TZIC) for Freescale i.MX5 familyAmit Kucheria1-0/+3
Freescale i.MX51 processor uses a new interrupt controller. Add driver for TrustZone Interrupt Controller Signed-off-by: Amit Kucheria <amit.kucheria@canonical.com>
2010-01-17Merge branch 'mxc-audio' into for-2.6.34Mark Brown1-0/+4
Conflicts: arch/arm/plat-mxc/Makefile (dual add) sound/soc/imx/mx27vis_wm8974.c (API updates & removal)
2010-01-17ASoC: Add a new imx-ssi sound driverSascha Hauer1-0/+6
The old driver has the number of SSI units in the system hardcoded, does not make use of the device model and works only on i.MX21/27. This driver replaces it. It works in DMA mode on i.MX21/27 and using an FIQ handler on other systems. It also supports AC97 mode of the SSI units. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Javier Martin <javier.martin@vista-silicon.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-01-08imx: only define deprecated symbols conditionallyUwe Kleine-König1-0/+4
Define deprecated symbols in an #ifdef IMX_NEEDS_DEPRECATED_SYMBOLS ... All files that still depend on the old definitions get -DIMX_NEEDS_DEPRECATED_SYMBOLS passed to the compiler. When all remaining users are fixed this allows including the soc specific headers unconditionally. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Cc: Eric Benard <eric@eukrea.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Alan Carvalho de Assis <acassis@gmail.com> Cc: Daniel Mack <daniel@caiaq.de> Cc: Alberto Panizzo <maramaopercheseimorto@gmail.com> Cc: Ilya Yanok <yanok@emcraft.com> Cc: Holger Schurig <hs4233@mail.mn-solutions.de> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Magnus Lilja <lilja.magnus@gmail.com>
2009-12-11USB: Add EHCI support for MX27 and MX31 based boardsDaniel Mack1-0/+1
The Freescale MX27 and MX31 SoCs have a EHCI controller onboard. The controller is capable of USB on the go. This patch adds a driver to support all three of them. Users have to pass details about serial interface configuration in the platform data. The USB OTG core used here is the ARC core, so the driver should be renamed and probably be merged with ehci-fsl.c eventually. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-11-14MXC: Add a digital audio multiplexer driverSascha Hauer1-0/+2
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-14MXC: Add support for ULPI ViewportsDaniel Mack1-0/+1
The ARC USB OTG Core has support for accessing ULPI tranceivers through so called ULPI viewports. Export a set of function for use with the USB OTG framework. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: linux-usb@vger.kernel.org Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-07MXC: Add iomux support for MX35 SoCsSascha Hauer1-0/+1
This iomux is called iomux-v3 in the tree because it is the third known incarnation of MXC iomuxers. It is not only found on the MX35 but also on the MX51 and probably others. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-27mxc: add arch_reset() functionIlya Yanok1-1/+1
This patch adds arch_reset() function for all mxc platforms. It also removes (unsused) arch/arm/mach-mx2/system.c file. This patch has been tested on i.MX1/27/31/35 Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13[ARM] MXC: add cpu_is_ macrosSascha Hauer1-1/+1
We had hardcoded cpu_is_ macros for mxc architectures till now. As we want to run the same kernel on i.MX31 and i.MX35 this patch adds cpu_is_ macros which expand to 0 or 1 if only one architecture is compiled in and only check for the cpu type if more than one architecture is compiled in. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-13[ARM] MXC: add pwm driver for i.MX SoCsSascha Hauer1-0/+1
This driver has been tested on MX27/MX31. It should work on MX1/MX1 aswell, but the actual setting of the PWM is missing so far. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-12-16patch-mxc-add-ARCH_MX1Paulius Zaleckas1-0/+1
Adds MX1 architecture to platform MXC. It will supersede mach-imx and let it die. Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt> Signed-off-by: Darius Augulis <augulis.darius@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-09-09MX2: Add DMA support for mx2 and (eventually) mx1Sascha Hauer1-1/+1
This patch adds DMA support for Freescale i.MX27 SoCs. It is derived from the i.MX1 port and should (though currently untested) still be working for the i.MX1. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-09-09MXC: add convenience function to register platform devicesSascha Hauer1-1/+1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05i.MX2 family: Add GPIO multiplexing supportJuergen Beisert1-0/+2
This patch adds GPIO multiplexing support for the imx1/mxc2 family of procesors. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-07-05i.MXC family: Adding timer supportJuergen Beisert1-1/+1
This patch adds timer support for the i.MX machine family. This code can be used on the following machs: - i.MX1 (tested) - i.MX2 (i.MX21 (to be tested), i.MX27 (tested)) - i.MX3 (i.MX31 (tested)) TODO: It seems impossible to build a kernel for more than one CPU because the timer do not follow the platform device rules. So it does only work if timer 1 can be accessed on all CPUs at the same address. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05MXC arch: Add gpio support for the whole platformJuergen Beisert1-1/+1
This patch bases on the one from Daniel Mack. The most important change to Daniel's patch is to be more generic. This gpio routine supports at least the i.MX27 and i.MX31 processors. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de> Acked-by: Daniel Mack <daniel@caiaq.de>
2008-07-05MXC family: Add clock handlingJuergen Beisert1-1/+1
Internal clock path handling for the mxc CPUs. Changed against the original Freescale code (and against clocklib for example): - clock rate is always calculated whenever one ask for the current rate (means struct clk has no more a member called "rate"). So switching the PLL base frequency will propagate immediately to all other clocks that are depending on this frequency. Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2008-03-31[ARM] 4877/1: i.MXC family: Clean up current platform codeRobert Schwebel1-4/+0
From: Juergen Beisert <j.beisert@pengutronix.de> This patch cleans up the in-kernel platform code from doxygen comments. We don't know how this could have leak in, but anyway. Changes since last release: - none Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de> Signed-off-by: Ross Wille <wille@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-22[ARM] 4461/1: MXC platform and i.MX31ADS core supportQuinn Jensen1-0/+10
This patch adds the foundation pieces for the Freescale MXC platforms, including i.MX2 and i.MX3 based systems. The bare-bones MX31 support in this patch boots to the rootdev panic with 8250 serial console configured "console=ttyS0,115200". It assumes that Redboot is the boot loader. Signed-off-by: Quinn Jensen <quinn.jensen@freescale.com> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-16 08:44:10 +0000