diff options
Diffstat (limited to 'drivers/of')
| -rw-r--r-- | drivers/of/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/of/Makefile | 1 | ||||
| -rw-r--r-- | drivers/of/base.c | 88 | ||||
| -rw-r--r-- | drivers/of/device.c | 84 | ||||
| -rw-r--r-- | drivers/of/gpio.c | 38 | ||||
| -rw-r--r-- | drivers/of/of_i2c.c | 67 | ||||
| -rw-r--r-- | drivers/of/of_spi.c | 93 | ||||
| -rw-r--r-- | drivers/of/platform.c | 3 |
8 files changed, 265 insertions, 117 deletions
diff --git a/drivers/of/Kconfig b/drivers/of/Kconfig index 3a7a11a75fb4..f821dbc952a4 100644 --- a/drivers/of/Kconfig +++ b/drivers/of/Kconfig @@ -4,7 +4,7 @@ config OF_DEVICE config OF_GPIO def_bool y - depends on OF && PPC_OF && HAVE_GPIO_LIB + depends on OF && PPC_OF && GPIOLIB help OpenFirmware GPIO accessors @@ -13,3 +13,9 @@ config OF_I2C depends on PPC_OF && I2C help OpenFirmware I2C accessors + +config OF_SPI + def_tristate SPI + depends on OF && PPC_OF && SPI + help + OpenFirmware SPI accessors diff --git a/drivers/of/Makefile b/drivers/of/Makefile index 548772e871fd..4c3c6f8e36f5 100644 --- a/drivers/of/Makefile +++ b/drivers/of/Makefile @@ -2,3 +2,4 @@ obj-y = base.o obj-$(CONFIG_OF_DEVICE) += device.o platform.o obj-$(CONFIG_OF_GPIO) += gpio.o obj-$(CONFIG_OF_I2C) += of_i2c.o +obj-$(CONFIG_OF_SPI) += of_spi.o diff --git a/drivers/of/base.c b/drivers/of/base.c index 23ffb7c0caf2..ad8ac1a8af28 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -385,3 +385,91 @@ struct device_node *of_find_matching_node(struct device_node *from, return np; } EXPORT_SYMBOL(of_find_matching_node); + +/** + * of_modalias_table: Table of explicit compatible ==> modalias mappings + * + * This table allows particulare compatible property values to be mapped + * to modalias strings. This is useful for busses which do not directly + * understand the OF device tree but are populated based on data contained + * within the device tree. SPI and I2C are the two current users of this + * table. + * + * In most cases, devices do not need to be listed in this table because + * the modalias value can be derived directly from the compatible table. + * However, if for any reason a value cannot be derived, then this table + * provides a method to override the implicit derivation. + * + * At the moment, a single table is used for all bus types because it is + * assumed that the data size is small and that the compatible values + * should already be distinct enough to differentiate between SPI, I2C + * and other devices. + */ +struct of_modalias_table { + char *of_device; + char *modalias; +}; +static struct of_modalias_table of_modalias_table[] = { + /* Empty for now; add entries as needed */ +}; + +/** + * of_modalias_node - Lookup appropriate modalias for a device node + * @node: pointer to a device tree node + * @modalias: Pointer to buffer that modalias value will be copied into + * @len: Length of modalias value + * + * Based on the value of the compatible property, this routine will determine + * an appropriate modalias value for a particular device tree node. Three + * separate methods are used to derive a modalias value. + * + * First method is to lookup the compatible value in of_modalias_table. + * Second is to look for a "linux,<modalias>" entry in the compatible list + * and used that for modalias. Third is to strip off the manufacturer + * prefix from the first compatible entry and use the remainder as modalias + * + * This routine returns 0 on success + */ +int of_modalias_node(struct device_node *node, char *modalias, int len) +{ + int i, cplen; + const char *compatible; + const char *p; + + /* 1. search for exception list entry */ + for (i = 0; i < ARRAY_SIZE(of_modalias_table); i++) { + compatible = of_modalias_table[i].of_device; + if (!of_device_is_compatible(node, compatible)) + continue; + strlcpy(modalias, of_modalias_table[i].modalias, len); + return 0; + } + + compatible = of_get_property(node, "compatible", &cplen); + if (!compatible) + return -ENODEV; + + /* 2. search for linux,<modalias> entry */ + p = compatible; + while (cplen > 0) { + if (!strncmp(p, "linux,", 6)) { + p += 6; + strlcpy(modalias, p, len); + return 0; + } + + i = strlen(p) + 1; + p += i; + cplen -= i; + } + + /* 3. take first compatible entry and strip manufacturer */ + p = strchr(compatible, ','); + if (!p) + return -ENODEV; + p++; + strlcpy(modalias, p, len); + return 0; +} +EXPORT_SYMBOL_GPL(of_modalias_node); + diff --git a/drivers/of/device.c b/drivers/of/device.c index 29681c4b700b..8a1d93a2bb81 100644 --- a/drivers/of/device.c +++ b/drivers/of/device.c @@ -48,16 +48,32 @@ void of_dev_put(struct of_device *dev) } EXPORT_SYMBOL(of_dev_put); -static ssize_t dev_show_devspec(struct device *dev, +static ssize_t devspec_show(struct device *dev, struct device_attribute *attr, char *buf) { struct of_device *ofdev; ofdev = to_of_device(dev); - return sprintf(buf, "%s", ofdev->node->full_name); + return sprintf(buf, "%s\n", ofdev->node->full_name); } -static DEVICE_ATTR(devspec, S_IRUGO, dev_show_devspec, NULL); +static ssize_t modalias_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct of_device *ofdev = to_of_device(dev); + ssize_t len = 0; + + len = of_device_get_modalias(ofdev, buf, PAGE_SIZE - 2); + buf[len] = '\n'; + buf[len+1] = 0; + return len+1; +} + +struct device_attribute of_platform_device_attrs[] = { + __ATTR_RO(devspec), + __ATTR_RO(modalias), + __ATTR_NULL +}; /** * of_release_dev - free an of device structure when all users of it are finished. @@ -78,25 +94,61 @@ EXPORT_SYMBOL(of_release_dev); int of_device_register(struct of_device *ofdev) { - int rc; - BUG_ON(ofdev->node == NULL); - - rc = device_register(&ofdev->dev); - if (rc) - return rc; - - rc = device_create_file(&ofdev->dev, &dev_attr_devspec); - if (rc) - device_unregister(&ofdev->dev); - - return rc; + return device_register(&ofdev->dev); } EXPORT_SYMBOL(of_device_register); void of_device_unregister(struct of_device *ofdev) { - device_remove_file(&ofdev->dev, &dev_attr_devspec); device_unregister(&ofdev->dev); } EXPORT_SYMBOL(of_device_unregister); + +ssize_t of_device_get_modalias(struct of_device *ofdev, + char *str, ssize_t len) +{ + const char *compat; + int cplen, i; + ssize_t tsize, csize, repend; + + /* Name & Type */ + csize = snprintf(str, len, "of:N%sT%s", + ofdev->node->name, ofdev->node->type); + + /* Get compatible property if any */ + compat = of_get_property(ofdev->node, "compatible", &cplen); + if (!compat) + return csize; + + /* Find true end (we tolerate multiple \0 at the end */ + for (i = (cplen - 1); i >= 0 && !compat[i]; i--) + cplen--; + if (!cplen) + return csize; + cplen++; + + /* Check space (need cplen+1 chars including final \0) */ + tsize = csize + cplen; + repend = tsize; + + if (csize >= len) /* @ the limit, all is already filled */ + return tsize; + + if (tsize >= len) { /* limit compat list */ + cplen = len - csize - 1; + repend = len; + } + + /* Copy and do char replacement */ + memcpy(&str[csize + 1], compat, cplen); + for (i = csize; i < repend; i++) { + char c = str[i]; + if (c == '\0') + str[i] = 'C'; + else if (c == ' ') + str[i] = '_'; + } + + return tsize; +} diff --git a/drivers/of/gpio.c b/drivers/of/gpio.c index 000681e98f2c..1c9cab844f10 100644 --- a/drivers/of/gpio.c +++ b/drivers/of/gpio.c @@ -137,38 +137,6 @@ int of_gpio_simple_xlate(struct of_gpio_chip *of_gc, struct device_node *np, } EXPORT_SYMBOL(of_gpio_simple_xlate); -/* Should be sufficient for now, later we'll use dynamic bases. */ -#if defined(CONFIG_PPC32) || defined(CONFIG_SPARC32) -#define GPIOS_PER_CHIP 32 -#else -#define GPIOS_PER_CHIP 64 -#endif - -static int of_get_gpiochip_base(struct device_node *np) -{ - struct device_node *gc = NULL; - int gpiochip_base = 0; - - while ((gc = of_find_all_nodes(gc))) { - if (!of_get_property(gc, "gpio-controller", NULL)) - continue; - - if (gc != np) { - gpiochip_base += GPIOS_PER_CHIP; - continue; - } - - of_node_put(gc); - - if (gpiochip_base >= ARCH_NR_GPIOS) - return -ENOSPC; - - return gpiochip_base; - } - - return -ENOENT; -} - /** * of_mm_gpiochip_add - Add memory mapped GPIO chip (bank) * @np: device node of the GPIO chip @@ -205,11 +173,7 @@ int of_mm_gpiochip_add(struct device_node *np, if (!mm_gc->regs) goto err1; - gc->base = of_get_gpiochip_base(np); - if (gc->base < 0) { - ret = gc->base; - goto err1; - } + gc->base = -1; if (!of_gc->xlate) of_gc->xlate = of_gpio_simple_xlate; diff --git a/drivers/of/of_i2c.c b/drivers/of/of_i2c.c index b2ccdcbeb896..6a98dc8aa30b 100644 --- a/drivers/of/of_i2c.c +++ b/drivers/of/of_i2c.c @@ -13,64 +13,9 @@ #include <linux/i2c.h> #include <linux/of.h> +#include <linux/of_i2c.h> #include <linux/module.h> -struct i2c_driver_device { - char *of_device; - char *i2c_type; -}; - -static struct i2c_driver_device i2c_devices[] = { -}; - -static int of_find_i2c_driver(struct device_node *node, - struct i2c_board_info *info) -{ - int i, cplen; - const char *compatible; - const char *p; - - /* 1. search for exception list entry */ - for (i = 0; i < ARRAY_SIZE(i2c_devices); i++) { - if (!of_device_is_compatible(node, i2c_devices[i].of_device)) - continue; - if (strlcpy(info->type, i2c_devices[i].i2c_type, - I2C_NAME_SIZE) >= I2C_NAME_SIZE) - return -ENOMEM; - - return 0; - } - - compatible = of_get_property(node, "compatible", &cplen); - if (!compatible) - return -ENODEV; - - /* 2. search for linux,<i2c-type> entry */ - p = compatible; - while (cplen > 0) { - if (!strncmp(p, "linux,", 6)) { - p += 6; - if (strlcpy(info->type, p, - I2C_NAME_SIZE) >= I2C_NAME_SIZE) - return -ENOMEM; - return 0; - } - - i = strlen(p) + 1; - p += i; - cplen -= i; - } - - /* 3. take fist compatible entry and strip manufacturer */ - p = strchr(compatible, ','); - if (!p) - return -ENODEV; - p++; - if (strlcpy(info->type, p, I2C_NAME_SIZE) >= I2C_NAME_SIZE) - return -ENOMEM; - return 0; -} - void of_register_i2c_devices(struct i2c_adapter *adap, struct device_node *adap_node) { @@ -82,6 +27,9 @@ void of_register_i2c_devices(struct i2c_adapter *adap, const u32 *addr; int len; + if (of_modalias_node(node, info.type, sizeof(info.type)) < 0) + continue; + addr = of_get_property(node, "reg", &len); if (!addr || len < sizeof(int) || *addr > (1 << 10) - 1) { printk(KERN_ERR @@ -90,13 +38,6 @@ void of_register_i2c_devices(struct i2c_adapter *adap, } info.irq = irq_of_parse_and_map(node, 0); - if (info.irq == NO_IRQ) - info.irq = -1; - - if (of_find_i2c_driver(node, &info) < 0) { - irq_dispose_mapping(info.irq); - continue; - } info.addr = *addr; diff --git a/drivers/of/of_spi.c b/drivers/of/of_spi.c new file mode 100644 index 000000000000..b01eec026f68 --- /dev/null +++ b/drivers/of/of_spi.c @@ -0,0 +1,93 @@ +/* + * SPI OF support routines + * Copyright (C) 2008 Secret Lab Technologies Ltd. + * + * Support routines for deriving SPI device attachments from the device + * tree. + */ + +#include <linux/of.h> +#include <linux/device.h> +#include <linux/spi/spi.h> +#include <linux/of_spi.h> + +/** + * of_register_spi_devices - Register child devices onto the SPI bus + * @master: Pointer to spi_master device + * @np: parent node of SPI device nodes + * + * Registers an spi_device for each child node of 'np' which has a 'reg' + * property. + */ +void of_register_spi_devices(struct spi_master *master, struct device_node *np) +{ + struct spi_device *spi; + struct device_node *nc; + const u32 *prop; + int rc; + int len; + + for_each_child_of_node(np, nc) { + /* Alloc an spi_device */ + spi = spi_alloc_device(master); + if (!spi) { + dev_err(&master->dev, "spi_device alloc error for %s\n", + nc->full_name); + spi_dev_put(spi); + continue; + } + + /* Select device driver */ + if (of_modalias_node(nc, spi->modalias, + sizeof(spi->modalias)) < 0) { + dev_err(&master->dev, "cannot find modalias for %s\n", + nc->full_name); + spi_dev_put(spi); + continue; + } + + /* Device address */ + prop = of_get_property(nc, "reg", &len); + if (!prop || len < sizeof(*prop)) { + dev_err(&master->dev, "%s has no 'reg' property\n", + nc->full_name); + spi_dev_put(spi); + continue; + } + spi->chip_select = *prop; + + /* Mode (clock phase/polarity/etc.) */ + if (of_find_property(nc, "spi-cpha", NULL)) + spi->mode |= SPI_CPHA; + if (of_find_property(nc, "spi-cpol", NULL)) + spi->mode |= SPI_CPOL; + + /* Device speed */ + prop = of_get_property(nc, "spi-max-frequency", &len); + if (!prop || len < sizeof(*prop)) { + dev_err(&master->dev, "%s has no 'spi-max-frequency' property\n", + nc->full_name); + spi_dev_put(spi); + continue; + } + spi->max_speed_hz = *prop; + + /* IRQ */ + spi->irq = irq_of_parse_and_map(nc, 0); + + /* Store a pointer to the node in the device structure */ + of_node_get(nc); + spi->dev.archdata.of_node = nc; + + /* Register the new device */ + request_module(spi->modalias); + rc = spi_add_device(spi); + if (rc) { + dev_err(&master->dev, "spi_device register error %s\n", + nc->full_name); + spi_dev_put(spi); + } + + } +} +EXPORT_SYMBOL(of_register_spi_devices); diff --git a/drivers/of/platform.c b/drivers/of/platform.c index ca09a63a64db..298de0f95d70 100644 --- a/drivers/of/platform.c +++ b/drivers/of/platform.c @@ -17,6 +17,8 @@ #include <linux/of_device.h> #include <linux/of_platform.h> +extern struct device_attribute of_platform_device_attrs[]; + static int of_platform_bus_match(struct device *dev, struct device_driver *drv) { struct of_device *of_dev = to_of_device(dev); @@ -103,6 +105,7 @@ int of_bus_type_init(struct bus_type *bus, const char *name) bus->suspend = of_platform_device_suspend; bus->resume = of_platform_device_resume; bus->shutdown = of_platform_device_shutdown; + bus->dev_attrs = of_platform_device_attrs; return bus_register(bus); } |