8 files changed, 195 insertions, 350 deletions

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 68f7b4216501..328826381a2d 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1208,9 +1208,6 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		ata_port_pbar_desc(ap, AHCI_PCI_BAR,
 				   0x100 + ap->port_no * 0x80, "port");
 
-		/* set initial link pm policy */
-		ap->lpm_policy = ATA_LPM_UNKNOWN;
-
 		/* set enclosure management message type */
 		if (ap->flags & ATA_FLAG_EM)
 			ap->em_message_type = hpriv->em_msg_type;
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 93867d3f8dd3..1a2aacfdebc5 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -201,7 +201,6 @@ enum {
 	AHCI_HFLAG_MV_PATA		= (1 << 4), /* PATA port */
 	AHCI_HFLAG_NO_MSI		= (1 << 5), /* no PCI MSI */
 	AHCI_HFLAG_NO_PMP		= (1 << 6), /* no PMP */
-	AHCI_HFLAG_NO_HOTPLUG		= (1 << 7), /* ignore PxSERR.DIAG.N */
 	AHCI_HFLAG_SECT255		= (1 << 8), /* max 255 sectors */
 	AHCI_HFLAG_YES_NCQ		= (1 << 9), /* force NCQ cap on */
 	AHCI_HFLAG_NO_SUSPEND		= (1 << 10), /* don't suspend */
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 07556853c0d6..6fef1fa75c54 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -129,9 +129,6 @@ static int __init ahci_probe(struct platform_device *pdev)
 		ata_port_desc(ap, "mmio %pR", mem);
 		ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80);
 
-		/* set initial link pm policy */
-		ap->lpm_policy = ATA_LPM_UNKNOWN;
-
 		/* set enclosure management message type */
 		if (ap->flags & ATA_FLAG_EM)
 			ap->em_message_type = hpriv->em_msg_type;
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index ed7803f2b4f1..437f92597788 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -56,8 +56,8 @@ MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip)
 module_param_named(ignore_sss, ahci_ignore_sss, int, 0444);
 MODULE_PARM_DESC(ignore_sss, "Ignore staggered spinup flag (0=don't ignore, 1=ignore)");
 
-static int ahci_enable_alpm(struct ata_port *ap, enum ata_lpm_policy policy);
-static void ahci_disable_alpm(struct ata_port *ap);
+static int ahci_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
+			unsigned hints);
 static ssize_t ahci_led_show(struct ata_port *ap, char *buf);
 static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
 			      size_t size);
@@ -163,8 +163,7 @@ struct ata_port_operations ahci_ops = {
 	.pmp_attach		= ahci_pmp_attach,
 	.pmp_detach		= ahci_pmp_detach,
 
-	.enable_pm		= ahci_enable_alpm,
-	.disable_pm		= ahci_disable_alpm,
+	.set_lpm		= ahci_set_lpm,
 	.em_show		= ahci_led_show,
 	.em_store		= ahci_led_store,
 	.sw_activity_show	= ahci_activity_show,
@@ -641,126 +640,56 @@ static void ahci_power_up(struct ata_port *ap)
 	writel(cmd | PORT_CMD_ICC_ACTIVE, port_mmio + PORT_CMD);
 }
 
-static void ahci_disable_alpm(struct ata_port *ap)
+static int ahci_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
+			unsigned int hints)
 {
+	struct ata_port *ap = link->ap;
 	struct ahci_host_priv *hpriv = ap->host->private_data;
-	void __iomem *port_mmio = ahci_port_base(ap);
-	u32 cmd;
 	struct ahci_port_priv *pp = ap->private_data;
-
-	/* LPM bits should be disabled by libata-core */
-	/* get the existing command bits */
-	cmd = readl(port_mmio + PORT_CMD);
-
-	/* disable ALPM and ASP */
-	cmd &= ~PORT_CMD_ASP;
-	cmd &= ~PORT_CMD_ALPE;
-
-	/* force the interface back to active */
-	cmd |= PORT_CMD_ICC_ACTIVE;
-
-	/* write out new cmd value */
-	writel(cmd, port_mmio + PORT_CMD);
-	cmd = readl(port_mmio + PORT_CMD);
-
-	/* wait 10ms to be sure we've come out of any low power state */
-	msleep(10);
-
-	/* clear out any PhyRdy stuff from interrupt status */
-	writel(PORT_IRQ_PHYRDY, port_mmio + PORT_IRQ_STAT);
-
-	/* go ahead and clean out PhyRdy Change from Serror too */
-	ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18)));
-
-	/*
-	 * Clear flag to indicate that we should ignore all PhyRdy
-	 * state changes
-	 */
-	hpriv->flags &= ~AHCI_HFLAG_NO_HOTPLUG;
-
-	/*
-	 * Enable interrupts on Phy Ready.
-	 */
-	pp->intr_mask |= PORT_IRQ_PHYRDY;
-	writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
-
-	/*
-	 * don't change the link pm policy - we can be called
-	 * just to turn of link pm temporarily
-	 */
-}
-
-static int ahci_enable_alpm(struct ata_port *ap, enum ata_lpm_policy policy)
-{
-	struct ahci_host_priv *hpriv = ap->host->private_data;
 	void __iomem *port_mmio = ahci_port_base(ap);
-	u32 cmd;
-	struct ahci_port_priv *pp = ap->private_data;
-	u32 asp;
-
-	/* Make sure the host is capable of link power management */
-	if (!(hpriv->cap & HOST_CAP_ALPM))
-		return -EINVAL;
 
-	switch (policy) {
-	case ATA_LPM_MAX_POWER:
-	case ATA_LPM_UNKNOWN:
+	if (policy != ATA_LPM_MAX_POWER) {
 		/*
-		 * if we came here with ATA_LPM_UNKNOWN,
-		 * it just means this is the first time we
-		 * have tried to enable - default to max performance,
-		 * and let the user go to lower power modes on request.
+		 * Disable interrupts on Phy Ready. This keeps us from
+		 * getting woken up due to spurious phy ready
+		 * interrupts.
 		 */
-		ahci_disable_alpm(ap);
-		return 0;
-	case ATA_LPM_MIN_POWER:
-		/* configure HBA to enter SLUMBER */
-		asp = PORT_CMD_ASP;
-		break;
-	case ATA_LPM_MED_POWER:
-		/* configure HBA to enter PARTIAL */
-		asp = 0;
-		break;
-	default:
-		return -EINVAL;
+		pp->intr_mask &= ~PORT_IRQ_PHYRDY;
+		writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
+
+		sata_link_scr_lpm(link, policy, false);
 	}
 
-	/*
-	 * Disable interrupts on Phy Ready. This keeps us from
-	 * getting woken up due to spurious phy ready interrupts
-	 * TBD - Hot plug should be done via polling now, is
-	 * that even supported?
-	 */
-	pp->intr_mask &= ~PORT_IRQ_PHYRDY;
-	writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
+	if (hpriv->cap & HOST_CAP_ALPM) {
+		u32 cmd = readl(port_mmio + PORT_CMD);
 
-	/*
-	 * Set a flag to indicate that we should ignore all PhyRdy
-	 * state changes since these can happen now whenever we
-	 * change link state
-	 */
-	hpriv->flags |= AHCI_HFLAG_NO_HOTPLUG;
+		if (policy == ATA_LPM_MAX_POWER || !(hints & ATA_LPM_HIPM)) {
+			cmd &= ~(PORT_CMD_ASP | PORT_CMD_ALPE);
+			cmd |= PORT_CMD_ICC_ACTIVE;
 
-	/* get the existing command bits */
-	cmd = readl(port_mmio + PORT_CMD);
+			writel(cmd, port_mmio + PORT_CMD);
+			readl(port_mmio + PORT_CMD);
 
-	/*
-	 * Set ASP based on Policy
-	 */
-	cmd |= asp;
+			/* wait 10ms to be sure we've come out of LPM state */
+			msleep(10);
+		} else {
+			cmd |= PORT_CMD_ALPE;
+			if (policy == ATA_LPM_MIN_POWER)
+				cmd |= PORT_CMD_ASP;
 
-	/*
-	 * Setting this bit will instruct the HBA to aggressively
-	 * enter a lower power link state when it's appropriate and
-	 * based on the value set above for ASP
-	 */
-	cmd |= PORT_CMD_ALPE;
+			/* write out new cmd value */
+			writel(cmd, port_mmio + PORT_CMD);
+		}
+	}
 
-	/* write out new cmd value */
-	writel(cmd, port_mmio + PORT_CMD);
-	cmd = readl(port_mmio + PORT_CMD);
+	if (policy == ATA_LPM_MAX_POWER) {
+		sata_link_scr_lpm(link, policy, false);
+
+		/* turn PHYRDY IRQ back on */
+		pp->intr_mask |= PORT_IRQ_PHYRDY;
+		writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
+	}
 
-	/* LPM bits should be set by libata-core */
 	return 0;
 }
 
@@ -1658,15 +1587,10 @@ static void ahci_port_intr(struct ata_port *ap)
 	if (unlikely(resetting))
 		status &= ~PORT_IRQ_BAD_PMP;
 
-	/* If we are getting PhyRdy, this is
-	 * just a power state change, we should
-	 * clear out this, plus the PhyRdy/Comm
-	 * Wake bits from Serror
-	 */
-	if ((hpriv->flags & AHCI_HFLAG_NO_HOTPLUG) &&
-		(status & PORT_IRQ_PHYRDY)) {
+	/* if LPM is enabled, PHYRDY doesn't mean anything */
+	if (ap->link.lpm_policy > ATA_LPM_MAX_POWER) {
 		status &= ~PORT_IRQ_PHYRDY;
-		ahci_scr_write(&ap->link, SCR_ERROR, ((1 << 16) | (1 << 18)));
+		ahci_scr_write(&ap->link, SCR_ERROR, SERR_PHYRDY_CHG);
 	}
 
 	if (unlikely(status & PORT_IRQ_ERROR)) {
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index b8024451234c..7c5538b9fa3b 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1028,182 +1028,6 @@ const char *sata_spd_string(unsigned int spd)
 	return spd_str[spd - 1];
 }
 
-static int ata_dev_set_dipm(struct ata_device *dev, enum ata_lpm_policy policy)
-{
-	struct ata_link *link = dev->link;
-	struct ata_port *ap = link->ap;
-	u32 scontrol;
-	unsigned int err_mask;
-	int rc;
-
-	/*
-	 * disallow DIPM for drivers which haven't set
-	 * ATA_FLAG_LPM.  This is because when DIPM is enabled,
-	 * phy ready will be set in the interrupt status on
-	 * state changes, which will cause some drivers to
-	 * think there are errors - additionally drivers will
-	 * need to disable hot plug.
-	 */
-	if (!(ap->flags & ATA_FLAG_LPM) || !ata_dev_enabled(dev)) {
-		ap->lpm_policy = ATA_LPM_UNKNOWN;
-		return -EINVAL;
-	}
-
-	/*
-	 * For DIPM, we will only enable it for the
-	 * min_power setting.
-	 *
-	 * Why?  Because Disks are too stupid to know that
-	 * If the host rejects a request to go to SLUMBER
-	 * they should retry at PARTIAL, and instead it
-	 * just would give up.  So, for medium_power to
-	 * work at all, we need to only allow HIPM.
-	 */
-	rc = sata_scr_read(link, SCR_CONTROL, &scontrol);
-	if (rc)
-		return rc;
-
-	switch (policy) {
-	case ATA_LPM_MIN_POWER:
-		/* no restrictions on LPM transitions */
-		scontrol &= ~(0x3 << 8);
-		rc = sata_scr_write(link, SCR_CONTROL, scontrol);
-		if (rc)
-			return rc;
-
-		/* enable DIPM */
-		if (dev->flags & ATA_DFLAG_DIPM)
-			err_mask = ata_dev_set_feature(dev,
-					SETFEATURES_SATA_ENABLE, SATA_DIPM);
-		break;
-	case ATA_LPM_MED_POWER:
-		/* allow LPM to PARTIAL */
-		scontrol &= ~(0x1 << 8);
-		scontrol |= (0x2 << 8);
-		rc = sata_scr_write(link, SCR_CONTROL, scontrol);
-		if (rc)
-			return rc;
-
-		/*
-		 * we don't have to disable DIPM since LPM flags
-		 * disallow transitions to SLUMBER, which effectively
-		 * disable DIPM if it does not support PARTIAL
-		 */
-		break;
-	case ATA_LPM_UNKNOWN:
-	case ATA_LPM_MAX_POWER:
-		/* disable all LPM transitions */
-		scontrol |= (0x3 << 8);
-		rc = sata_scr_write(link, SCR_CONTROL, scontrol);
-		if (rc)
-			return rc;
-
-		/*
-		 * we don't have to disable DIPM since LPM flags
-		 * disallow all transitions which effectively
-		 * disable DIPM anyway.
-		 */
-		break;
-	}
-
-	/* FIXME: handle SET FEATURES failure */
-	(void) err_mask;
-
-	return 0;
-}
-
-/**
- *	ata_dev_enable_pm - enable SATA interface power management
- *	@dev:  device to enable power management
- *	@policy: the link power management policy
- *
- *	Enable SATA Interface power management.  This will enable
- *	Device Interface Power Management (DIPM) for min_power
- * 	policy, and then call driver specific callbacks for
- *	enabling Host Initiated Power management.
- *
- *	Locking: Caller.
- *	Returns: -EINVAL if LPM is not supported, 0 otherwise.
- */
-void ata_dev_enable_pm(struct ata_device *dev, enum ata_lpm_policy policy)
-{
-	int rc = 0;
-	struct ata_port *ap = dev->link->ap;
-
-	/* set HIPM first, then DIPM */
-	if (ap->ops->enable_pm)
-		rc = ap->ops->enable_pm(ap, policy);
-	if (rc)
-		goto enable_pm_out;
-	rc = ata_dev_set_dipm(dev, policy);
-
-enable_pm_out:
-	if (rc)
-		ap->lpm_policy = ATA_LPM_MAX_POWER;
-	else
-		ap->lpm_policy = policy;
-	return /* rc */;	/* hopefully we can use 'rc' eventually */
-}
-
-#ifdef CONFIG_PM
-/**
- *	ata_dev_disable_pm - disable SATA interface power management
- *	@dev: device to disable power management
- *
- *	Disable SATA Interface power management.  This will disable
- *	Device Interface Power Management (DIPM) without changing
- * 	policy,  call driver specific callbacks for disabling Host
- * 	Initiated Power management.
- *
- *	Locking: Caller.
- *	Returns: void
- */
-static void ata_dev_disable_pm(struct ata_device *dev)
-{
-	struct ata_port *ap = dev->link->ap;
-
-	ata_dev_set_dipm(dev, ATA_LPM_MAX_POWER);
-	if (ap->ops->disable_pm)
-		ap->ops->disable_pm(ap);
-}
-#endif	/* CONFIG_PM */
-
-void ata_lpm_schedule(struct ata_port *ap, enum ata_lpm_policy policy)
-{
-	ap->lpm_policy = policy;
-	ap->link.eh_info.action |= ATA_EH_LPM;
-	ap->link.eh_info.flags |= ATA_EHI_NO_AUTOPSY;
-	ata_port_schedule_eh(ap);
-}
-
-#ifdef CONFIG_PM
-static void ata_lpm_enable(struct ata_host *host)
-{
-	struct ata_link *link;
-	struct ata_port *ap;
-	struct ata_device *dev;
-	int i;
-
-	for (i = 0; i < host->n_ports; i++) {
-		ap = host->ports[i];
-		ata_for_each_link(link, ap, EDGE) {
-			ata_for_each_dev(dev, link, ALL)
-				ata_dev_disable_pm(dev);
-		}
-	}
-}
-
-static void ata_lpm_disable(struct ata_host *host)
-{
-	int i;
-
-	for (i = 0; i < host->n_ports; i++) {
-		struct ata_port *ap = host->ports[i];
-		ata_lpm_schedule(ap, ap->lpm_policy);
-	}
-}
-#endif	/* CONFIG_PM */
-
 /**
  *	ata_dev_classify - determine device type based on ATA-spec signature
  *	@tf: ATA taskfile register set for device to be identified
@@ -2562,13 +2386,6 @@ int ata_dev_configure(struct ata_device *dev)
 	if (dev->flags & ATA_DFLAG_LBA48)
 		dev->max_sectors = ATA_MAX_SECTORS_LBA48;
 
-	if (!(dev->horkage & ATA_HORKAGE_LPM)) {
-		if (ata_id_has_hipm(dev->id))
-			dev->flags |= ATA_DFLAG_HIPM;
-		if (ata_id_has_dipm(dev->id))
-			dev->flags |= ATA_DFLAG_DIPM;
-	}
-
 	/* Limit PATA drive on SATA cable bridge transfers to udma5,
 	   200 sectors */
 	if (ata_dev_knobble(dev)) {
@@ -2589,13 +2406,6 @@ int ata_dev_configure(struct ata_device *dev)
 		dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128,
 					 dev->max_sectors);
 
-	if (ata_dev_blacklisted(dev) & ATA_HORKAGE_LPM) {
-		dev->horkage |= ATA_HORKAGE_LPM;
-
-		/* reset link pm_policy for this port to no pm */
-		ap->lpm_policy = ATA_LPM_MAX_POWER;
-	}
-
 	if (ap->ops->dev_config)
 		ap->ops->dev_config(dev);
 
@@ -5495,12 +5305,6 @@ int ata_host_suspend(struct ata_host *host, pm_message_t mesg)
 	int rc;
 
 	/*
-	 * disable link pm on all ports before requesting
-	 * any pm activity
-	 */
-	ata_lpm_enable(host);
-
-	/*
 	 * On some hardware, device fails to respond after spun down
 	 * for suspend.  As the device won't be used before being
 	 * resumed, we don't need to touch the device.  Ask EH to skip
@@ -5533,9 +5337,6 @@ void ata_host_resume(struct ata_host *host)
 	ata_host_request_pm(host, PMSG_ON, ATA_EH_RESET,
 			    ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, 0);
 	host->dev->power.power_state = PMSG_ON;
-
-	/* reenable link pm */
-	ata_lpm_disable(host);
 }
 #endif
 
@@ -6096,7 +5897,7 @@ static void async_port_probe(void *data, async_cookie_t cookie)
 		spin_lock_irqsave(ap->lock, flags);
 
 		ehi->probe_mask |= ATA_ALL_DEVICES;
-		ehi->action |= ATA_EH_RESET | ATA_EH_LPM;
+		ehi->action |= ATA_EH_RESET;
 		ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET;
 
 		ap->pflags &= ~ATA_PFLAG_INITIALIZING;
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 96aa75ddf87f..a645cd3ab163 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1580,9 +1580,9 @@ static void ata_eh_analyze_serror(struct ata_link *link)
 	 * host links.  For disabled PMP links, only N bit is
 	 * considered as X bit is left at 1 for link plugging.
 	 */
-	hotplug_mask = 0;
-
-	if (!(link->flags & ATA_LFLAG_DISABLED) || ata_is_host_link(link))
+	if (link->lpm_policy != ATA_LPM_MAX_POWER)
+		hotplug_mask = 0;	/* hotplug doesn't work w/ LPM */
+	else if (!(link->flags & ATA_LFLAG_DISABLED) || ata_is_host_link(link))
 		hotplug_mask = SERR_PHYRDY_CHG | SERR_DEV_XCHG;
 	else
 		hotplug_mask = SERR_PHYRDY_CHG;
@@ -2784,8 +2784,9 @@ int ata_eh_reset(struct ata_link *link, int classify,
 	ata_eh_done(link, NULL, ATA_EH_RESET);
 	if (slave)
 		ata_eh_done(slave, NULL, ATA_EH_RESET);
-	ehc->last_reset = jiffies;	/* update to completion time */
+	ehc->last_reset = jiffies;		/* update to completion time */
 	ehc->i.action |= ATA_EH_REVALIDATE;
+	link->lpm_policy = ATA_LPM_UNKNOWN;	/* reset LPM state */
 
 	rc = 0;
  out:
@@ -3211,6 +3212,121 @@ static int ata_eh_maybe_retry_flush(struct ata_device *dev)
 	return rc;
 }
 
+/**
+ *	ata_eh_set_lpm - configure SATA interface power management
+ *	@link: link to configure power management
+ *	@policy: the link power management policy
+ *	@r_failed_dev: out parameter for failed device
+ *
+ *	Enable SATA Interface power management.  This will enable
+ *	Device Interface Power Management (DIPM) for min_power
+ * 	policy, and then call driver specific callbacks for
+ *	enabling Host Initiated Power management.
+ *
+ *	LOCKING:
+ *	EH context.
+ *
+ *	RETURNS:
+ *	0 on success, -errno on failure.
+ */
+static int ata_eh_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
+			  struct ata_device **r_failed_dev)
+{
+	struct ata_port *ap = link->ap;
+	struct ata_eh_context *ehc = &link->eh_context;
+	struct ata_device *dev, *link_dev = NULL, *lpm_dev = NULL;
+	unsigned int hints = ATA_LPM_EMPTY | ATA_LPM_HIPM;
+	unsigned int err_mask;
+	int rc;
+
+	/* if the link or host doesn't do LPM, noop */
+	if ((link->flags & ATA_LFLAG_NO_LPM) || (ap && !ap->ops->set_lpm))
+		return 0;
+
+	/*
+	 * DIPM is enabled only for MIN_POWER as some devices
+	 * misbehave when the host NACKs transition to SLUMBER.  Order
+	 * device and link configurations such that the host always
+	 * allows DIPM requests.
+	 */
+	ata_for_each_dev(dev, link, ENABLED) {
+		bool hipm = ata_id_has_hipm(dev->id);
+		bool dipm = ata_id_has_dipm(dev->id);
+
+		/* find the first enabled and LPM enabled devices */
+		if (!link_dev)
+			link_dev = dev;
+
+		if (!lpm_dev && (hipm || dipm))
+			lpm_dev = dev;
+
+		hints &= ~ATA_LPM_EMPTY;
+		if (!hipm)
+			hints &= ~ATA_LPM_HIPM;
+
+		/* disable DIPM before changing link config */
+		if (policy != ATA_LPM_MIN_POWER && dipm) {
+			err_mask = ata_dev_set_feature(dev,
+					SETFEATURES_SATA_DISABLE, SATA_DIPM);
+			if (err_mask && err_mask != AC_ERR_DEV) {
+				ata_dev_printk(dev, KERN_WARNING,
+					"failed to disable DIPM, Emask 0x%x\n",
+					err_mask);
+				rc = -EIO;
+				goto fail;
+			}
+		}
+	}
+
+	rc = ap->ops->set_lpm(link, policy, hints);
+	if (!rc && ap->slave_link)
+		rc = ap->ops->set_lpm(ap->slave_link, policy, hints);
+
+	/*
+	 * Attribute link config failure to the first (LPM) enabled
+	 * device on the link.
+	 */
+	if (rc) {
+		if (rc == -EOPNOTSUPP) {
+			link->flags |= ATA_LFLAG_NO_LPM;
+			return 0;
+		}
+		dev = lpm_dev ? lpm_dev : link_dev;
+		goto fail;
+	}
+
+	/* host config updated, enable DIPM if transitioning to MIN_POWER */
+	ata_for_each_dev(dev, link, ENABLED) {
+		if (policy == ATA_LPM_MIN_POWER && ata_id_has_dipm(dev->id)) {
+			err_mask = ata_dev_set_feature(dev,
+					SETFEATURES_SATA_ENABLE, SATA_DIPM);
+			if (err_mask && err_mask != AC_ERR_DEV) {
+				ata_dev_printk(dev, KERN_WARNING,
+					"failed to enable DIPM, Emask 0x%x\n",
+					err_mask);
+				rc = -EIO;
+				goto fail;
+			}
+		}
+	}
+
+	link->lpm_policy = policy;
+	if (ap && ap->slave_link)
+		ap->slave_link->lpm_policy = policy;
+	return 0;
+
+fail:
+	/* if no device or only one more chance is left, disable LPM */
+	if (!dev || ehc->tries[dev->devno] <= 2) {
+		ata_link_printk(link, KERN_WARNING,
+				"disabling LPM on the link\n");
+		link->flags |= ATA_LFLAG_NO_LPM;
+	}
+	if (r_failed_dev)
+		*r_failed_dev = dev;
+	return rc;
+}
+
 static int ata_link_nr_enabled(struct ata_link *link)
 {
 	struct ata_device *dev;
@@ -3295,6 +3411,10 @@ static int ata_eh_schedule_probe(struct ata_device *dev)
 	ehc->saved_xfer_mode[dev->devno] = 0;
 	ehc->saved_ncq_enabled &= ~(1 << dev->devno);
 
+	/* the link maybe in a deep sleep, wake it up */
+	if (link->lpm_policy > ATA_LPM_MAX_POWER)
+		link->ap->ops->set_lpm(link, ATA_LPM_MAX_POWER, ATA_LPM_EMPTY);
+
 	/* Record and count probe trials on the ering.  The specific
 	 * error mask used is irrelevant.  Because a successful device
 	 * detection clears the ering, this count accumulates only if
@@ -3396,8 +3516,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
 {
 	struct ata_link *link;
 	struct ata_device *dev;
-	int nr_failed_devs;
-	int rc;
+	int rc, nr_fails;
 	unsigned long flags, deadline;
 
 	DPRINTK("ENTER\n");
@@ -3438,7 +3557,6 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
 
  retry:
 	rc = 0;
-	nr_failed_devs = 0;
 
 	/* if UNLOADING, finish immediately */
 	if (ap->pflags & ATA_PFLAG_UNLOADING)
@@ -3523,13 +3641,17 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
 	}
 
 	/* the rest */
-	ata_for_each_link(link, ap, EDGE) {
+	nr_fails = 0;
+	ata_for_each_link(link, ap, PMP_FIRST) {
 		struct ata_eh_context *ehc = &link->eh_context;
 
+		if (sata_pmp_attached(ap) && ata_is_host_link(link))
+			goto config_lpm;
+
 		/* revalidate existing devices and attach new ones */
 		rc = ata_eh_revalidate_and_attach(link, &dev);
 		if (rc)
-			goto dev_fail;
+			goto rest_fail;
 
 		/* if PMP got attached, return, pmp EH will take care of it */
 		if (link->device->class == ATA_DEV_PMP) {
@@ -3541,7 +3663,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
 		if (ehc->i.flags & ATA_EHI_SETMODE) {
 			rc = ata_set_mode(link, &dev);
 			if (rc)
-				goto dev_fail;
+				goto rest_fail;
 			ehc->i.flags &= ~ATA_EHI_SETMODE;
 		}
 
@@ -3554,7 +3676,7 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
 					continue;
 				rc = atapi_eh_clear_ua(dev);
 				if (rc)
-					goto dev_fail;
+					goto rest_fail;
 			}
 		}
 
@@ -3564,21 +3686,25 @@ int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
 				continue;
 			rc = ata_eh_maybe_retry_flush(dev);
 			if (rc)
-				goto dev_fail;
+				goto rest_fail;
 		}
 
+	config_lpm:
 		/* configure link power saving */
-		if (ehc->i.action & ATA_EH_LPM)
-			ata_for_each_dev(dev, link, ALL)
-				ata_dev_enable_pm(dev, ap->lpm_policy);
+		if (link->lpm_policy != ap->target_lpm_policy) {
+			rc = ata_eh_set_lpm(link, ap->target_lpm_policy, &dev);
+			if (rc)
+				goto rest_fail;
+		}
 
 		/* this link is okay now */
 		ehc->i.flags = 0;
 		continue;
 
-dev_fail:
-		nr_failed_devs++;
-		ata_eh_handle_dev_fail(dev, rc);
+	rest_fail:
+		nr_fails++;
+		if (dev)
+			ata_eh_handle_dev_fail(dev, rc);
 
 		if (ap->pflags & ATA_PFLAG_FROZEN) {
 			/* PMP reset requires working host port.
@@ -3590,7 +3716,7 @@ dev_fail:
 		}
 	}
 
-	if (nr_failed_devs)
+	if (nr_fails)
 		goto retry;
 
  out:
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index aa56681f68db..56f6224fd6e6 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -117,6 +117,7 @@ static ssize_t ata_scsi_lpm_store(struct device *dev,
 	struct Scsi_Host *shost = class_to_shost(dev);
 	struct ata_port *ap = ata_shost_to_port(shost);
 	enum ata_lpm_policy policy;
+	unsigned long flags;
 
 	/* UNKNOWN is internal state, iterate from MAX_POWER */
 	for (policy = ATA_LPM_MAX_POWER;
@@ -129,7 +130,11 @@ static ssize_t ata_scsi_lpm_store(struct device *dev,
 	if (policy == ARRAY_SIZE(ata_lpm_policy_names))
 		return -EINVAL;
 
-	ata_lpm_schedule(ap, policy);
+	spin_lock_irqsave(ap->lock, flags);
+	ap->target_lpm_policy = policy;
+	ata_port_schedule_eh(ap);
+	spin_unlock_irqrestore(ap->lock, flags);
+
 	return count;
 }
 
@@ -139,11 +144,11 @@ static ssize_t ata_scsi_lpm_show(struct device *dev,
 	struct Scsi_Host *shost = class_to_shost(dev);
 	struct ata_port *ap = ata_shost_to_port(shost);
 
-	if (ap->lpm_policy >= ARRAY_SIZE(ata_lpm_policy_names))
+	if (ap->target_lpm_policy >= ARRAY_SIZE(ata_lpm_policy_names))
 		return -EINVAL;
 
 	return snprintf(buf, PAGE_SIZE, "%s\n",
-			ata_lpm_policy_names[ap->lpm_policy]);
+			ata_lpm_policy_names[ap->target_lpm_policy]);
 }
 DEVICE_ATTR(link_power_management_policy, S_IRUGO | S_IWUSR,
 	    ata_scsi_lpm_show, ata_scsi_lpm_store);
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 65b6a73c3ac7..55a6f413a550 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -102,10 +102,6 @@ extern int sata_link_init_spd(struct ata_link *link);
 extern int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg);
 extern int ata_cmd_ioctl(struct scsi_device *scsidev, void __user *arg);
 extern struct ata_port *ata_port_alloc(struct ata_host *host);
-extern void ata_dev_enable_pm(struct ata_device *dev,
-			      enum ata_lpm_policy policy);
-extern void ata_lpm_schedule(struct ata_port *ap,
-			     enum ata_lpm_policy policy);
 extern const char *sata_spd_string(unsigned int spd);
 
 /* libata-acpi.c */