From a819f8ba76e81669fcc2665ac532cac650694b99 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 9 Dec 2005 11:57:44 -0600 Subject: [PATCH] ppc32: Add TQM85xx (8540/8541/8555/8560) board support This patch adds support for the TQ Components TQM85xx modules. Currently the modules TQM8540/8541/8555/8560 are supported. Signed-off-by: Stefan Roese Signed-off-by: Kumar Gala Signed-off-by: Paul Mackerras --- arch/ppc/platforms/85xx/tqm85xx.c | 419 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 419 insertions(+) create mode 100644 arch/ppc/platforms/85xx/tqm85xx.c (limited to 'arch/ppc/platforms/85xx/tqm85xx.c') diff --git a/arch/ppc/platforms/85xx/tqm85xx.c b/arch/ppc/platforms/85xx/tqm85xx.c new file mode 100644 index 000000000000..c6dfd8f0f9df --- /dev/null +++ b/arch/ppc/platforms/85xx/tqm85xx.c @@ -0,0 +1,419 @@ +/* + * arch/ppc/platforms/85xx/tqm85xx.c + * + * TQM85xx (40/41/55/60) board specific routines + * + * Copyright (c) 2005 DENX Software Engineering + * Stefan Roese + * + * Based on original work by + * Kumar Gala + * Copyright 2004 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include /* for linux/serial_core.h */ +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#ifndef CONFIG_PCI +unsigned long isa_io_base = 0; +unsigned long isa_mem_base = 0; +#endif + + +extern unsigned long total_memory; /* in mm/init */ + +unsigned char __res[sizeof (bd_t)]; + +/* Internal interrupts are all Level Sensitive, and Positive Polarity */ +static u_char tqm85xx_openpic_initsenses[] __initdata = { + MPC85XX_INTERNAL_IRQ_SENSES, + 0x0, /* External 0: */ + 0x0, /* External 1: */ +#if defined(CONFIG_PCI) + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 2: PCI INTA */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 3: PCI INTB */ +#else + 0x0, /* External 2: */ + 0x0, /* External 3: */ +#endif + 0x0, /* External 4: */ + 0x0, /* External 5: */ + 0x0, /* External 6: */ + 0x0, /* External 7: */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 8: PHY */ + 0x0, /* External 9: */ + 0x0, /* External 10: */ + 0x0, /* External 11: */ +}; + +static const char *GFAR_PHY_0 = "phy0:2"; +static const char *GFAR_PHY_1 = "phy0:1"; +#ifdef CONFIG_MPC8540 +static const char *GFAR_PHY_3 = "phy0:3"; +#endif + +/* ************************************************************************ + * + * Setup the architecture + * + */ +static void __init +tqm85xx_setup_arch(void) +{ + bd_t *binfo = (bd_t *) __res; + unsigned int freq; + struct gianfar_platform_data *pdata; + struct gianfar_mdio_data *mdata; + +#ifdef CONFIG_MPC8560 + cpm2_reset(); +#endif + + /* get the core frequency */ + freq = binfo->bi_intfreq; + + if (ppc_md.progress) + ppc_md.progress("tqm85xx_setup_arch()", 0); + + /* Set loops_per_jiffy to a half-way reasonable value, + for use until calibrate_delay gets called. */ + loops_per_jiffy = freq / HZ; + +#ifdef CONFIG_PCI + /* setup PCI host bridges */ + mpc85xx_setup_hose(); +#endif + +#ifndef CONFIG_MPC8560 +#if defined(CONFIG_SERIAL_8250) + mpc85xx_early_serial_map(); +#endif + +#ifdef CONFIG_SERIAL_TEXT_DEBUG + /* Invalidate the entry we stole earlier the serial ports + * should be properly mapped */ + invalidate_tlbcam_entry(num_tlbcam_entries - 1); +#endif +#endif /* CONFIG_MPC8560 */ + + /* setup the board related info for the MDIO bus */ + mdata = (struct gianfar_mdio_data *) ppc_sys_get_pdata(MPC85xx_MDIO); + + mdata->irq[0] = MPC85xx_IRQ_EXT8; + mdata->irq[1] = MPC85xx_IRQ_EXT8; + mdata->irq[2] = -1; + mdata->irq[3] = MPC85xx_IRQ_EXT8; + mdata->irq[31] = -1; + mdata->paddr += binfo->bi_immr_base; + + /* setup the board related information for the enet controllers */ + pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1); + if (pdata) { + pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; + pdata->bus_id = GFAR_PHY_0; + memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6); + } + + pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2); + if (pdata) { + pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; + pdata->bus_id = GFAR_PHY_1; + memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); + } + +#ifdef CONFIG_MPC8540 + pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_FEC); + if (pdata) { + pdata->board_flags = 0; + pdata->bus_id = GFAR_PHY_3; + memcpy(pdata->mac_addr, binfo->bi_enet2addr, 6); + } +#endif + +#ifdef CONFIG_BLK_DEV_INITRD + if (initrd_start) + ROOT_DEV = Root_RAM0; + else +#endif +#ifdef CONFIG_ROOT_NFS + ROOT_DEV = Root_NFS; +#else + ROOT_DEV = Root_HDA1; +#endif +} + +#ifdef CONFIG_MPC8560 +static irqreturn_t cpm2_cascade(int irq, void *dev_id, struct pt_regs *regs) +{ + while ((irq = cpm2_get_irq(regs)) >= 0) + __do_IRQ(irq, regs); + return IRQ_HANDLED; +} + +static struct irqaction cpm2_irqaction = { + .handler = cpm2_cascade, + .flags = SA_INTERRUPT, + .mask = CPU_MASK_NONE, + .name = "cpm2_cascade", +}; +#endif /* CONFIG_MPC8560 */ + +void __init +tqm85xx_init_IRQ(void) +{ + bd_t *binfo = (bd_t *) __res; + + /* Determine the Physical Address of the OpenPIC regs */ + phys_addr_t OpenPIC_PAddr = + binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET; + OpenPIC_Addr = ioremap(OpenPIC_PAddr, MPC85xx_OPENPIC_SIZE); + OpenPIC_InitSenses = tqm85xx_openpic_initsenses; + OpenPIC_NumInitSenses = sizeof (tqm85xx_openpic_initsenses); + + /* Skip reserved space and internal sources */ + openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200); + + /* Map PIC IRQs 0-11 */ + openpic_set_sources(48, 12, OpenPIC_Addr + 0x10000); + + /* we let openpic interrupts starting from an offset, to + * leave space for cascading interrupts underneath. + */ + openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET); + +#ifdef CONFIG_MPC8560 + /* Setup CPM2 PIC */ + cpm2_init_IRQ(); + + setup_irq(MPC85xx_IRQ_CPM, &cpm2_irqaction); +#endif /* CONFIG_MPC8560 */ + + return; +} + +int tqm85xx_show_cpuinfo(struct seq_file *m) +{ + uint pvid, svid, phid1; + uint memsize = total_memory; + bd_t *binfo = (bd_t *) __res; + unsigned int freq; + + /* get the core frequency */ + freq = binfo->bi_intfreq; + + pvid = mfspr(SPRN_PVR); + svid = mfspr(SPRN_SVR); + + seq_printf(m, "Vendor\t\t: TQ Components\n"); + seq_printf(m, "Machine\t\t: TQM%s\n", cur_ppc_sys_spec->ppc_sys_name); + seq_printf(m, "clock\t\t: %dMHz\n", freq / 1000000); + seq_printf(m, "PVR\t\t: 0x%x\n", pvid); + seq_printf(m, "SVR\t\t: 0x%x\n", svid); + + /* Display cpu Pll setting */ + phid1 = mfspr(SPRN_HID1); + seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); + + /* Display the amount of memory */ + seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); + + return 0; +} + +#if defined(CONFIG_I2C) && defined(CONFIG_SENSORS_DS1337) +extern ulong ds1337_get_rtc_time(void); +extern int ds1337_set_rtc_time(unsigned long nowtime); + +static int __init +tqm85xx_rtc_hookup(void) +{ + struct timespec tv; + + ppc_md.set_rtc_time = ds1337_set_rtc_time; + ppc_md.get_rtc_time = ds1337_get_rtc_time; + + tv.tv_nsec = 0; + tv.tv_sec = (ppc_md.get_rtc_time)(); + do_settimeofday(&tv); + + return 0; +} +late_initcall(tqm85xx_rtc_hookup); +#endif + +#ifdef CONFIG_PCI +/* + * interrupt routing + */ +int mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +{ + static char pci_irq_table[][4] = + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + {PIRQA, PIRQB, 0, 0}, + }; + + const long min_idsel = 0x1c, max_idsel = 0x1c, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; +} + +int mpc85xx_exclude_device(u_char bus, u_char devfn) +{ + if (bus == 0 && PCI_SLOT(devfn) == 0) + return PCIBIOS_DEVICE_NOT_FOUND; + else + return PCIBIOS_SUCCESSFUL; +} + +#endif /* CONFIG_PCI */ + +#ifdef CONFIG_RAPIDIO +void platform_rio_init(void) +{ + /* 512MB RIO LAW at 0xc0000000 */ + mpc85xx_rio_setup(0xc0000000, 0x20000000); +} +#endif /* CONFIG_RAPIDIO */ + +/* ************************************************************************ */ +void __init +platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + /* parse_bootinfo must always be called first */ + parse_bootinfo(find_bootinfo()); + + /* + * If we were passed in a board information, copy it into the + * residual data area. + */ + if (r3) { + memcpy((void *) __res, (void *) (r3 + KERNELBASE), + sizeof (bd_t)); + } + +#if defined(CONFIG_SERIAL_TEXT_DEBUG) && !defined(CONFIG_MPC8560) + { + bd_t *binfo = (bd_t *) __res; + struct uart_port p; + + /* Use the last TLB entry to map CCSRBAR to allow access to DUART regs */ + settlbcam(num_tlbcam_entries - 1, binfo->bi_immr_base, + binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0); + + memset(&p, 0, sizeof (p)); + p.iotype = SERIAL_IO_MEM; + p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART0_OFFSET; + p.uartclk = binfo->bi_busfreq; + + gen550_init(0, &p); + + memset(&p, 0, sizeof (p)); + p.iotype = SERIAL_IO_MEM; + p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART1_OFFSET; + p.uartclk = binfo->bi_busfreq; + + gen550_init(1, &p); + } +#endif + +#if defined(CONFIG_BLK_DEV_INITRD) + /* + * If the init RAM disk has been configured in, and there's a valid + * starting address for it, set it up. + */ + if (r4) { + initrd_start = r4 + KERNELBASE; + initrd_end = r5 + KERNELBASE; + } +#endif /* CONFIG_BLK_DEV_INITRD */ + + /* Copy the kernel command line arguments to a safe place. */ + + if (r6) { + *(char *) (r7 + KERNELBASE) = 0; + strcpy(cmd_line, (char *) (r6 + KERNELBASE)); + } + + identify_ppc_sys_by_id(mfspr(SPRN_SVR)); + + /* setup the PowerPC module struct */ + ppc_md.setup_arch = tqm85xx_setup_arch; + ppc_md.show_cpuinfo = tqm85xx_show_cpuinfo; + + ppc_md.init_IRQ = tqm85xx_init_IRQ; + ppc_md.get_irq = openpic_get_irq; + + ppc_md.restart = mpc85xx_restart; + ppc_md.power_off = mpc85xx_power_off; + ppc_md.halt = mpc85xx_halt; + + ppc_md.find_end_of_memory = mpc85xx_find_end_of_memory; + + ppc_md.time_init = NULL; + ppc_md.set_rtc_time = NULL; + ppc_md.get_rtc_time = NULL; + ppc_md.calibrate_decr = mpc85xx_calibrate_decr; + +#ifndef CONFIG_MPC8560 +#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG) + ppc_md.progress = gen550_progress; +#endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */ +#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_KGDB) + ppc_md.early_serial_map = mpc85xx_early_serial_map; +#endif /* CONFIG_SERIAL_8250 && CONFIG_KGDB */ +#endif /* CONFIG_MPC8560 */ + + if (ppc_md.progress) + ppc_md.progress("tqm85xx_init(): exit", 0); + + return; +} -- cgit v1.2.3