summaryrefslogtreecommitdiff
path: root/drivers/pci
AgeCommit message (Collapse)AuthorFilesLines
2012-11-05PCI/portdrv: Don't create hotplug slots unless port supports hotplugTaku Izumi1-1/+2
Commit 2dcfaf85 mistakenly dropped the "flags & PCI_EXP_FLAGS_SLOT" test, so now we create hotplug slots even for PCIe port devices that don't support hotplug. This patch fixes this problem. [bhelgaas: changelog] Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Reviewed-by: Jiang Liu <jiang.liu@huawei.com>
2012-11-05PCI/PM: Fix proc config reg access for D3cold and bridge suspendingHuang Ying4-34/+42
In https://bugzilla.kernel.org/show_bug.cgi?id=48981 Peter reported that /proc/bus/pci/??/??.? does not work for 3.6. This is because the device configuration space registers are not accessible if the corresponding parent bridge is suspended or the device is put into D3cold state. This is the same as /sys/bus/pci/devices/0000:??:??.?/config access issue. So the function used to solve sysfs issue is used to solve this issue. This patch moves pci_config_pm_runtime_get()/_put() from pci/pci-sysfs.c to pci/pci.c and makes them extern so they can be used by both the sysfs and proc paths. [bhelgaas: changelog, references, reporters] Reference: https://bugzilla.kernel.org/show_bug.cgi?id=48981 Reference: https://bugzilla.kernel.org/show_bug.cgi?id=49031 Reported-by: Forrest Loomis <cybercyst@gmail.com> Reported-by: Peter <lekensteyn@gmail.com> Reported-by: Micael Dias <kam1kaz3@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> CC: stable@vger.kernel.org # v3.6+
2012-11-02PCI/PM: Resume device before shutdownHuang Ying1-10/+2
Some actions during shutdown need device to be in D0 state, such as MSI shutdown etc, so resume device before shutdown. Without this patch, a device may not be enumerated after a kexec because the corresponding bridge is not in D0, so that configuration space of the device is not accessible. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> CC: stable@vger.kernel.org # v3.6+
2012-11-02PCI/PM: Fix deadlock when unbinding device if parent in D3coldHuang Ying2-7/+16
If a PCI device and its parents are put into D3cold, unbinding the device will trigger deadlock as follow: - driver_unbind - device_release_driver - device_lock(dev) <--- previous lock here - __device_release_driver - pm_runtime_get_sync ... - rpm_resume(dev) - rpm_resume(dev->parent) ... - pci_pm_runtime_resume ... - pci_set_power_state - __pci_start_power_transition - pci_wakeup_bus(dev->parent->subordinate) - pci_walk_bus - device_lock(dev) <--- deadlock here If we do not do device_lock in pci_walk_bus, we can avoid deadlock. Device_lock in pci_walk_bus is introduced in commit: d71374dafbba7ec3f67371d3b7e9f6310a588808, corresponding email thread is: https://lkml.org/lkml/2006/5/26/38. The patch author Zhang Yanmin said device_lock is added to pci_walk_bus because: Some error handling functions call pci_walk_bus. For example, PCIe aer. Here we lock the device, so the driver wouldn't detach from the device, as the cb might call driver's callback function. So I fixed the deadlock as follows: - remove device_lock from pci_walk_bus - add device_lock into callback if callback will call driver's callback I checked pci_walk_bus users one by one, and found only PCIe aer needs device lock. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> CC: stable@vger.kernel.org # v3.6+ CC: Zhang Yanmin <yanmin.zhang@intel.com>
2012-10-06Merge branch 'next' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc updates from Benjamin Herrenschmidt: "Some highlights in addition to the usual batch of fixes: - 64TB address space support for 64-bit processes by Aneesh Kumar - Gavin Shan did a major cleanup & re-organization of our EEH support code (IBM fancy PCI error handling & recovery infrastructure) which paves the way for supporting different platform backends, along with some rework of the PCIe code for the PowerNV platform in order to remove home made resource allocations and instead use the generic code (which is possible after some small improvements to it done by Gavin). - Uprobes support by Ananth N Mavinakayanahalli - A pile of embedded updates from Freescale folks, including new SoC and board supports, more KVM stuff including preparing for 64-bit BookE KVM support, ePAPR 1.1 updates, etc..." Fixup trivial conflicts in drivers/scsi/ipr.c * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (146 commits) powerpc/iommu: Fix multiple issues with IOMMU pools code powerpc: Fix VMX fix for memcpy case driver/mtd:IFC NAND:Initialise internal SRAM before any write powerpc/fsl-pci: use 'Header Type' to identify PCIE mode powerpc/eeh: Don't release eeh_mutex in eeh_phb_pe_get powerpc: Remove tlb batching hack for nighthawk powerpc: Set paca->data_offset = 0 for boot cpu powerpc/perf: Sample only if SIAR-Valid bit is set in P7+ powerpc/fsl-pci: fix warning when CONFIG_SWIOTLB is disabled powerpc/mpc85xx: Update interrupt handling for IFC controller powerpc/85xx: Enable USB support in p1023rds_defconfig powerpc/smp: Do not disable IPI interrupts during suspend powerpc/eeh: Fix crash on converting OF node to edev powerpc/eeh: Lock module while handling EEH event powerpc/kprobe: Don't emulate store when kprobe stwu r1 powerpc/kprobe: Complete kprobe and migrate exception frame powerpc/kprobe: Introduce a new thread flag powerpc: Remove unused __get_user64() and __put_user64() powerpc/eeh: Global mutex to protect PE tree powerpc/eeh: Remove EEH PE for normal PCI hotplug ...
2012-10-02Merge tag 'stable/for-linus-3.7-x86-tag' of ↵Linus Torvalds1-5/+10
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen update from Konrad Rzeszutek Wilk: "Features: - When hotplugging PCI devices in a PV guest we can allocate Xen-SWIOTLB later. - Cleanup Xen SWIOTLB. - Support pages out grants from HVM domains in the backends. - Support wild cards in xen-pciback.hide=(BDF) arguments. - Update grant status updates with upstream hypervisor. - Boot PV guests with more than 128GB. - Cleanup Xen MMU code/add comments. - Obtain XENVERS using a preferred method. - Lay out generic changes to support Xen ARM. - Allow privcmd ioctl for HVM (used to do only PV). - Do v2 of mmap_batch for privcmd ioctls. - If hypervisor saves the LED keyboard light - we will now instruct the kernel about its state. Fixes: - More fixes to Xen PCI backend for various calls/FLR/etc. - With more than 4GB in a 64-bit PV guest disable native SWIOTLB. - Fix up smatch warnings. - Fix up various return values in privmcmd and mm." * tag 'stable/for-linus-3.7-x86-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (48 commits) xen/pciback: Restore the PCI config space after an FLR. xen-pciback: properly clean up after calling pcistub_device_find() xen/vga: add the xen EFI video mode support xen/x86: retrieve keyboard shift status flags from hypervisor. xen/gndev: Xen backend support for paged out grant targets V4. xen-pciback: support wild cards in slot specifications xen/swiotlb: Fix compile warnings when using plain integer instead of NULL pointer. xen/swiotlb: Remove functions not needed anymore. xen/pcifront: Use Xen-SWIOTLB when initting if required. xen/swiotlb: For early initialization, return zero on success. xen/swiotlb: Use the swiotlb_late_init_with_tbl to init Xen-SWIOTLB late when PV PCI is used. xen/swiotlb: Move the error strings to its own function. xen/swiotlb: Move the nr_tbl determination in its own function. xen/arm: compile and run xenbus xen: resynchronise grant table status codes with upstream xen/privcmd: return -EFAULT on error xen/privcmd: Fix mmap batch ioctl error status copy back. xen/privcmd: add PRIVCMD_MMAPBATCH_V2 ioctl xen/mm: return more precise error from xen_remap_domain_range() xen/mmu: If the revector fails, don't attempt to revector anything else. ...
2012-10-02Merge tag 'pm-for-3.7-rc1' of ↵Linus Torvalds1-17/+0
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael J Wysocki: - Improved system suspend/resume and runtime PM handling for the SH TMU, CMT and MTU2 clock event devices (also used by ARM/shmobile). - Generic PM domains framework extensions related to cpuidle support and domain objects lookup using names. - ARM/shmobile power management updates including improved support for the SH7372's A4S power domain containing the CPU core. - cpufreq changes related to AMD CPUs support from Matthew Garrett, Andre Przywara and Borislav Petkov. - cpu0 cpufreq driver from Shawn Guo. - cpufreq governor fixes related to the relaxing of limit from Michal Pecio. - OMAP cpufreq updates from Axel Lin and Richard Zhao. - cpuidle ladder governor fixes related to the disabling of states from Carsten Emde and me. - Runtime PM core updates related to the interactions with the system suspend core from Alan Stern and Kevin Hilman. - Wakeup sources modification allowing more helper functions to be called from interrupt context from John Stultz and additional diagnostic code from Todd Poynor. - System suspend error code path fix from Feng Hong. Fixed up conflicts in cpufreq/powernow-k8 that stemmed from the workqueue fixes conflicting fairly badly with the removal of support for hardware P-state chips. The changes were independent but somewhat intertwined. * tag 'pm-for-3.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (76 commits) Revert "PM QoS: Use spinlock in the per-device PM QoS constraints code" PM / Runtime: let rpm_resume() succeed if RPM_ACTIVE, even when disabled, v2 cpuidle: rename function name "__cpuidle_register_driver", v2 cpufreq: OMAP: Check IS_ERR() instead of NULL for omap_device_get_by_hwmod_name cpuidle: remove some empty lines PM: Prevent runtime suspend during system resume PM QoS: Use spinlock in the per-device PM QoS constraints code PM / Sleep: use resume event when call dpm_resume_early cpuidle / ACPI : move cpuidle_device field out of the acpi_processor_power structure ACPI / processor: remove pointless variable initialization ACPI / processor: remove unused function parameter cpufreq: OMAP: remove loops_per_jiffy recalculate for smp sections: fix section conflicts in drivers/cpufreq cpufreq: conservative: update frequency when limits are relaxed cpufreq / ondemand: update frequency when limits are relaxed properly __init-annotate pm_sysrq_init() cpufreq: Add a generic cpufreq-cpu0 driver PM / OPP: Initialize OPP table from device tree ARM: add cpufreq transiton notifier to adjust loops_per_jiffy for smp cpufreq: Remove support for hardware P-state chips from powernow-k8 ...
2012-10-01Merge tag 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds34-1121/+669
Pull PCI changes from Bjorn Helgaas: "Host bridge hotplug - Protect acpi_pci_drivers and acpi_pci_roots (Taku Izumi) - Clear host bridge resource info to avoid issue when releasing (Yinghai Lu) - Notify acpi_pci_drivers when hot-plugging host bridges (Jiang Liu) - Use standard list ops for acpi_pci_drivers (Jiang Liu) Device hotplug - Use pci_get_domain_bus_and_slot() to close hotplug races (Jiang Liu) - Remove fakephp driver (Bjorn Helgaas) - Fix VGA ref count in hotplug remove path (Yinghai Lu) - Allow acpiphp to handle PCIe ports without native hotplug (Jiang Liu) - Implement resume regardless of pciehp_force param (Oliver Neukum) - Make pci_fixup_irqs() work after init (Thierry Reding) Miscellaneous - Add pci_pcie_type(dev) and remove pci_dev.pcie_type (Yijing Wang) - Factor out PCI Express Capability accessors (Jiang Liu) - Add pcibios_window_alignment() so powerpc EEH can use generic resource assignment (Gavin Shan) - Make pci_error_handlers const (Stephen Hemminger) - Cleanup drivers/pci/remove.c (Bjorn Helgaas) - Improve Vendor-Specific Extended Capability support (Bjorn Helgaas) - Use standard list ops for bus->devices (Bjorn Helgaas) - Avoid kmalloc in pci_get_subsys() and pci_get_class() (Feng Tang) - Reassign invalid bus number ranges (Intel DP43BF workaround) (Yinghai Lu)" * tag 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (102 commits) PCI: acpiphp: Handle PCIe ports without native hotplug capability PCI/ACPI: Use acpi_driver_data() rather than searching acpi_pci_roots PCI/ACPI: Protect acpi_pci_roots list with mutex PCI/ACPI: Use acpi_pci_root info rather than looking it up again PCI/ACPI: Pass acpi_pci_root to acpi_pci_drivers' add/remove interface PCI/ACPI: Protect acpi_pci_drivers list with mutex PCI/ACPI: Notify acpi_pci_drivers when hot-plugging PCI root bridges PCI/ACPI: Use normal list for struct acpi_pci_driver PCI/ACPI: Use DEVICE_ACPI_HANDLE rather than searching acpi_pci_roots PCI: Fix default vga ref_count ia64/PCI: Clear host bridge aperture struct resource x86/PCI: Clear host bridge aperture struct resource PCI: Stop all children first, before removing all children Revert "PCI: Use hotplug-safe pci_get_domain_bus_and_slot()" PCI: Provide a default pcibios_update_irq() PCI: Discard __init annotations for pci_fixup_irqs() and related functions PCI: Use correct type when freeing bus resource list PCI: Check P2P bridge for invalid secondary/subordinate range PCI: Convert "new_id"/"remove_id" into generic pci_bus driver attributes xen-pcifront: Use hotplug-safe pci_get_domain_bus_and_slot() ...
2012-10-01Merge branch 'for-linus' of ↵Linus Torvalds1-4/+0
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull the trivial tree from Jiri Kosina: "Tiny usual fixes all over the place" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits) doc: fix old config name of kprobetrace fs/fs-writeback.c: cleanup riteback_sb_inodes kerneldoc btrfs: fix the commment for the action flags in delayed-ref.h btrfs: fix trivial typo for the comment of BTRFS_FREE_INO_OBJECTID vfs: fix kerneldoc for generic_fh_to_parent() treewide: fix comment/printk/variable typos ipr: fix small coding style issues doc: fix broken utf8 encoding nfs: comment fix platform/x86: fix asus_laptop.wled_type module parameter mfd: printk/comment fixes doc: getdelays.c: remember to close() socket on error in create_nl_socket() doc: aliasing-test: close fd on write error mmc: fix comment typos dma: fix comments spi: fix comment/printk typos in spi Coccinelle: fix typo in memdup_user.cocci tmiofb: missing NULL pointer checks tools: perf: Fix typo in tools/perf tools/testing: fix comment / output typos ...
2012-09-24Merge branch 'pci/yinghai-misc' into nextBjorn Helgaas2-3/+9
2012-09-24Merge branch 'pci/jiang-acpiphp' into nextBjorn Helgaas1-10/+31
2012-09-24Merge branch 'pci/taku-acpi-pci-host-bridge-v3' into nextBjorn Helgaas1-5/+7
2012-09-24PCI: acpiphp: Handle PCIe ports without native hotplug capabilityJiang Liu1-10/+31
Commit 0d52f54e2ef64c189dedc332e680b2eb4a34590a (PCI / ACPI: Make acpiphp ignore root bridges using PCIe native hotplug) added code that made the acpiphp driver completely ignore PCIe root complexes for which the kernel had been granted control of the native PCIe hotplug feature by the BIOS through _OSC. Later commit 619a5182d1f38a3d629ee48e04fa182ef9170052 "PCI hotplug: Always allow acpiphp to handle non-PCIe bridges" relaxed the constraints to allow acpiphp driver handle non-PCIe bridges under such a complex. The constraint needs to be relaxed further to allow acpiphp driver to handle PCIe ports without native PCIe hotplug capability. Some MR-IOV switch chipsets, such PLX8696, support multiple virtual PCIe switches and may migrate downstream ports among virtual switches. To migrate a downstream port from the source virtual switch to the target, the port needs to be hot-removed from the source and hot-added into the target. The pciehp driver can't be used here because there are no slots within the virtual PCIe switch. So acpiphp driver is used to support downstream port migration. A typical configuration is as below: [Root without native PCIe HP] [Upstream port of vswitch without native PCIe HP] [Downstream port of vswitch with native PCIe HP] [PCIe endpoint] Here acpiphp driver will be used to handle root ports and upstream port in the virtual switch, and pciehp driver will be used to handle downstream ports in the virtual switch. Signed-off-by: Jiang Liu <liuj97@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-09-24PCI/ACPI: Pass acpi_pci_root to acpi_pci_drivers' add/remove interfaceTaku Izumi1-5/+7
This patch changes .add/.remove interfaces of acpi_pci_driver. In the current implementation acpi_handle is passed as a parameter of .add/.remove interface. However, the acpi_pci_root structure contains more useful information than just the acpi_handle. This enables us to avoid some useless lookups in each acpi_pci_driver. Note: This changes interfaces used by acpi_pci_register_driver(), an exported symbol. This patch updates all the in-kernel users, but any out-of-kernel acpi_pci_register_driver() users will need updates. [bhelgaas: changelog] Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-09-24Merge branch 'pm-sleep'Rafael J. Wysocki1-17/+0
* pm-sleep: PM: Prevent runtime suspend during system resume PM / Sleep: use resume event when call dpm_resume_early Conflicts: drivers/base/power/main.c (trivial)
2012-09-22Merge branch 'stable/late-swiotlb.v3.3' into stable/for-linus-3.7Konrad Rzeszutek Wilk1-4/+9
* stable/late-swiotlb.v3.3: xen/swiotlb: Fix compile warnings when using plain integer instead of NULL pointer. xen/swiotlb: Remove functions not needed anymore. xen/pcifront: Use Xen-SWIOTLB when initting if required. xen/swiotlb: For early initialization, return zero on success. xen/swiotlb: Use the swiotlb_late_init_with_tbl to init Xen-SWIOTLB late when PV PCI is used. xen/swiotlb: Move the error strings to its own function. xen/swiotlb: Move the nr_tbl determination in its own function. swiotlb: add the late swiotlb initialization function with iotlb memory xen/swiotlb: With more than 4GB on 64-bit, disable the native SWIOTLB. xen/swiotlb: Simplify the logic. Conflicts: arch/x86/xen/pci-swiotlb-xen.c Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-09-20PCI: Stop all children first, before removing all childrenYinghai Lu1-16/+35
This restores the previous behavior of stopping all child devices before removing any of them. The current SR-IOV design, where removing the PF also drops references on all the VFs, depends on having the VFs continue to exist after having been stopped. [bhelgaas: changelog] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-09-20Revert "PCI: Use hotplug-safe pci_get_domain_bus_and_slot()"Bjorn Helgaas1-2/+6
This reverts commit 433efd2247b0cbf5e7e86275e1f21281d3b99047. When we remove an SR-IOV device, we have this call chain: driver .remove() method pci_disable_sriov() sriov_disable() virtfn_remove() pci_get_domain_bus_and_slot() sriov_disable() is only called for PFs, not for VFs. When it's called for a PF, it loops through all the VFs and calls virtfn_remove() for each. But we stop and remove VFs before PFs, so by the time we get to virtfn_remove(), the VFs have already been stopped and deleted from the device list. Now pci_get_domain_bus_and_slot(), which uses bus_find_device() and relies on that device list, doesn't find the VFs, so the VF references aren't released correctly. Reported-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-09-19PM: Prevent runtime suspend during system resumeAlan Stern1-17/+0
This patch (as1591) moves the pm_runtime_get_noresume() and pm_runtime_put_sync() calls from __device_suspend() and device_resume() to device_prepare() and device_complete() in the PM core. The reason for doing this is to make sure that parent devices remain at full power (i.e., don't go into runtime suspend) while their children are being resumed from a system sleep. The PCI core already contained equivalent code to serve the same purpose. The patch removes the duplicated code, since it is no longer needed. One of the comments from the PCI core gets moved into the PM core, and a second comment is added to explain whe the _get_noresume and _put_sync calls are present. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-09-19Merge branch 'pci/thierry-fixup-irqs' into nextBjorn Helgaas1-2/+7
* pci/thierry-fixup-irqs: PCI: Provide a default pcibios_update_irq() PCI: Discard __init annotations for pci_fixup_irqs() and related functions
2012-09-18PCI: Provide a default pcibios_update_irq()Thierry Reding1-0/+5
Most architectures implement this in exactly the same way. Instead of having each architecture duplicate this function, provide a single implementation in the core and make it a weak symbol so that it can be overridden on architectures where it is required. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-09-18PCI: Discard __init annotations for pci_fixup_irqs() and related functionsThierry Reding1-2/+2
Remove the __init annotations in order to keep pci_fixup_irqs() around after init (e.g. for hotplug). This requires the same change for the implementation of pcibios_update_irq() on all architectures. While at it, all __devinit annotations are removed as well, since they will be useless now that HOTPLUG is always on. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-18PCI: Use correct type when freeing bus resource listYinghai Lu1-1/+5
Should use struct pci_bus_resource instead of struct pci_host_bridge_window Commit 45ca9e9730 ("PCI: add helpers for building PCI bus resource lists") added pci_free_resource_list() and used it in pci_bus_remove_resources(). Later it was also used for host bridge aperture lists, which was fine until commit 0efd5aab41 ("PCI: add struct pci_host_bridge_window with CPU/bus address offset"). That commit added offset information, so we needed a struct pci_host_bridge_window that was separate from struct pci_bus_resource. Commit 0efd5aab41 should have split the host bridge aperture users of pci_free_resource_list() from the pci_bus_resource user (pci_bus_remove_resources()), but it did not. [bhelgaas: changelog -- 0efd5aab41 was mine, so this is all my fault] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-09-18PCI: Check P2P bridge for invalid secondary/subordinate rangeYinghai Lu1-2/+4
For bridges with "secondary > subordinate", i.e., invalid bus number apertures, we don't enumerate anything behind the bridge unless the user specified "pci=assign-busses". This patch makes us automatically try to reassign the downstream bus numbers in this case (just for that bridge, not for all bridges as "pci=assign-busses" does). We don't discover all the devices on the Intel DP43BF motherboard without this change (or "pci=assign-busses") because its BIOS configures a bridge as: pci 0000:00:1e.0: PCI bridge to [bus 20-08] (subtractive decode) [bhelgaas: changelog, change message to dev_info] Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=18412 Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=625754 Reported-by: Brian C. Huffman <bhuffman@graze.net> Reported-by: VL <vl.homutov@gmail.com> Tested-by: VL <vl.homutov@gmail.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: stable@vger.kernel.org
2012-09-18Merge branch 'pci/konstantin-sysfs' into nextBjorn Helgaas1-47/+10
* pci/konstantin-sysfs: PCI: Convert "new_id"/"remove_id" into generic pci_bus driver attributes
2012-09-18powerpc/eeh: Remove EEH PE for normal PCI hotplugGavin Shan1-1/+1
Function eeh_rmv_from_parent_pe() could be called by the path of either normal PCI hotplug, or EEH recovery. For the former case, we need purge the corresponding PE on removal of the associated PE bus. The patch tries to cover that by passing more information to function pcibios_remove_pci_devices() so that we know if the corresponding PE needs to be purged or be marked as "invalid". Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-17Merge branch 'pci/jiang-get-domain-bus-slot' into nextBjorn Helgaas3-20/+6
* pci/jiang-get-domain-bus-slot: xen-pcifront: Use hotplug-safe pci_get_domain_bus_and_slot() PCI: Use hotplug-safe pci_get_domain_bus_and_slot() PCI/cpcihp: Use hotplug-safe pci_get_domain_bus_and_slot() PCI/vga: Use hotplug-safe pci_get_domain_bus_and_slot() ia64/PCI: Use hotplug-safe pci_get_domain_bus_and_slot()
2012-09-17PCI: Convert "new_id"/"remove_id" into generic pci_bus driver attributesKonstantin Khlebnikov1-47/+10
This patch removes hardcoded sysfs attributes manipulation and converts them into generic pci_bus->drv_attrs. This saves several bytes. Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-09-17xen/pcifront: Use Xen-SWIOTLB when initting if required.Konrad Rzeszutek Wilk1-4/+9
We piggyback on "xen/swiotlb: Use the swiotlb_late_init_with_tbl to init Xen-SWIOTLB late when PV PCI is used." functionality to start up the Xen-SWIOTLB if we are hot-plugged. This allows us to bypass the need to supply 'iommu=soft' on the Linux command line (mostly). With this patch, if a user forgot 'iommu=soft' on the command line, and hotplug a PCI device they will get: pcifront pci-0: Installing PCI frontend Warning: only able to allocate 4 MB for software IO TLB software IO TLB [mem 0x2a000000-0x2a3fffff] (4MB) mapped at [ffff88002a000000-ffff88002a3fffff] pcifront pci-0: Creating PCI Frontend Bus 0000:00 pcifront pci-0: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x0000-0xffff] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff] pci 0000:00:00.0: [8086:10d3] type 00 class 0x020000 pci 0000:00:00.0: reg 10: [mem 0xfe5c0000-0xfe5dffff] pci 0000:00:00.0: reg 14: [mem 0xfe500000-0xfe57ffff] pci 0000:00:00.0: reg 18: [io 0xe000-0xe01f] pci 0000:00:00.0: reg 1c: [mem 0xfe5e0000-0xfe5e3fff] pcifront pci-0: claiming resource 0000:00:00.0/0 pcifront pci-0: claiming resource 0000:00:00.0/1 pcifront pci-0: claiming resource 0000:00:00.0/2 pcifront pci-0: claiming resource 0000:00:00.0/3 e1000e: Intel(R) PRO/1000 Network Driver - 2.0.0-k e1000e: Copyright(c) 1999 - 2012 Intel Corporation. e1000e 0000:00:00.0: Disabling ASPM L0s L1 e1000e 0000:00:00.0: enabling device (0000 -> 0002) e1000e 0000:00:00.0: Xen PCI mapped GSI16 to IRQ34 e1000e 0000:00:00.0: (unregistered net_device): Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode e1000e 0000:00:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1b:21:ab:c6:13 e1000e 0000:00:00.0: eth0: Intel(R) PRO/1000 Network Connection e1000e 0000:00:00.0: eth0: MAC: 3, PHY: 8, PBA No: E46981-005 The "Warning only" will go away if one supplies 'iommu=soft' instead as we have a higher chance of being able to allocate large swaths of memory. Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-09-13Merge commit 'v3.6-rc5' into pci/gavin-window-alignmentBjorn Helgaas6-16/+89
* commit 'v3.6-rc5': (1098 commits) Linux 3.6-rc5 HID: tpkbd: work even if the new Lenovo Keyboard driver is not configured Remove user-triggerable BUG from mpol_to_str xen/pciback: Fix proper FLR steps. uml: fix compile error in deliver_alarm() dj: memory scribble in logi_dj Fix order of arguments to compat_put_time[spec|val] xen: Use correct masking in xen_swiotlb_alloc_coherent. xen: fix logical error in tlb flushing xen/p2m: Fix one-off error in checking the P2M tree directory. powerpc: Don't use __put_user() in patch_instruction powerpc: Make sure IPI handlers see data written by IPI senders powerpc: Restore correct DSCR in context switch powerpc: Fix DSCR inheritance in copy_thread() powerpc: Keep thread.dscr and thread.dscr_inherit in sync powerpc: Update DSCR on all CPUs when writing sysfs dscr_default powerpc/powernv: Always go into nap mode when CPU is offline powerpc: Give hypervisor decrementer interrupts their own handler powerpc/vphn: Fix arch_update_cpu_topology() return value ARM: gemini: fix the gemini build ... Conflicts: drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c drivers/rapidio/devices/tsi721.c
2012-09-13Merge branch 'pci/trivial' into nextBjorn Helgaas5-31/+4
* pci/trivial: PCI: Drop duplicate const in DECLARE_PCI_FIXUP_SECTION PCI: Drop bogus default from ARCH_SUPPORTS_MSI PCI: cpqphp: Remove unreachable path PCI: Remove bus number resource debug messages PCI/AER: Print completion message at KERN_INFO to match starting message PCI: Fix drivers/pci/pci.c kernel-doc warnings
2012-09-13Merge commit 'v3.6-rc5' into nextBjorn Helgaas6-16/+89
* commit 'v3.6-rc5': (1098 commits) Linux 3.6-rc5 HID: tpkbd: work even if the new Lenovo Keyboard driver is not configured Remove user-triggerable BUG from mpol_to_str xen/pciback: Fix proper FLR steps. uml: fix compile error in deliver_alarm() dj: memory scribble in logi_dj Fix order of arguments to compat_put_time[spec|val] xen: Use correct masking in xen_swiotlb_alloc_coherent. xen: fix logical error in tlb flushing xen/p2m: Fix one-off error in checking the P2M tree directory. powerpc: Don't use __put_user() in patch_instruction powerpc: Make sure IPI handlers see data written by IPI senders powerpc: Restore correct DSCR in context switch powerpc: Fix DSCR inheritance in copy_thread() powerpc: Keep thread.dscr and thread.dscr_inherit in sync powerpc: Update DSCR on all CPUs when writing sysfs dscr_default powerpc/powernv: Always go into nap mode when CPU is offline powerpc: Give hypervisor decrementer interrupts their own handler powerpc/vphn: Fix arch_update_cpu_topology() return value ARM: gemini: fix the gemini build ... Conflicts: drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c drivers/rapidio/devices/tsi721.c
2012-09-12xen-pcifront: Use hotplug-safe pci_get_domain_bus_and_slot()Jiang Liu1-8/+2
Following code has a race window between pci_find_bus() and pci_get_slot() if PCI hotplug operation happens between them which removes the pci_bus. So use PCI hotplug safe interface pci_get_domain_bus_and_slot() instead, which also reduces code complexity. struct pci_bus *pci_bus = pci_find_bus(domain, busno); struct pci_dev *pci_dev = pci_get_slot(pci_bus, devfn); Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-09-12PCI: Use hotplug-safe pci_get_domain_bus_and_slot()Jiang Liu1-6/+2
Following code has a race window between pci_find_bus() and pci_get_slot() if PCI hotplug operation happens between them which removes the pci_bus. So use PCI hotplug safe interface pci_get_domain_bus_and_slot() instead, which also reduces code complexity. struct pci_bus *pci_bus = pci_find_bus(domain, busno); struct pci_dev *pci_dev = pci_get_slot(pci_bus, devfn); Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-09-12PCI/cpcihp: Use hotplug-safe pci_get_domain_bus_and_slot()Jiang Liu1-6/+2
Following code has a race window between pci_find_bus() and pci_get_slot() if PCI hotplug operation happens between them which removes the pci_bus. So use PCI hotplug safe interface pci_get_domain_bus_and_slot() instead, which also reduces code complexity. struct pci_bus *pci_bus = pci_find_bus(domain, busno); struct pci_dev *pci_dev = pci_get_slot(pci_bus, devfn); Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-09-12Merge branch 'pci/stephen-const' into nextBjorn Helgaas3-10/+10
* pci/stephen-const: make drivers with pci error handlers const scsi: make pci error handlers const netdev: make pci_error_handlers const PCI: Make pci_error_handlers const
2012-09-12Merge branch 'x86/platform' of ↵Konrad Rzeszutek Wilk37-654/+1159
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into stable/for-linus-3.7 * 'x86/platform' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (9690 commits) x86: Document x86_init.paging.pagetable_init() x86: xen: Cleanup and remove x86_init.paging.pagetable_setup_done() x86: Move paging_init() call to x86_init.paging.pagetable_init() x86: Rename pagetable_setup_start() to pagetable_init() x86: Remove base argument from x86_init.paging.pagetable_setup_start Linux 3.6-rc5 HID: tpkbd: work even if the new Lenovo Keyboard driver is not configured Remove user-triggerable BUG from mpol_to_str xen/pciback: Fix proper FLR steps. uml: fix compile error in deliver_alarm() dj: memory scribble in logi_dj Fix order of arguments to compat_put_time[spec|val] xen: Use correct masking in xen_swiotlb_alloc_coherent. xen: fix logical error in tlb flushing xen/p2m: Fix one-off error in checking the P2M tree directory. powerpc: Don't use __put_user() in patch_instruction powerpc: Make sure IPI handlers see data written by IPI senders powerpc: Restore correct DSCR in context switch powerpc: Fix DSCR inheritance in copy_thread() powerpc: Keep thread.dscr and thread.dscr_inherit in sync ...
2012-09-11Merge branch 'pci/gavin-window-alignment' into nextBjorn Helgaas1-21/+60
* pci/gavin-window-alignment: powerpc/powernv: I/O and memory alignment for P2P bridges powerpc/PCI: Override pcibios_window_alignment() PCI: Refactor pbus_size_mem() PCI: Align P2P windows using pcibios_window_alignment() PCI: Add weak pcibios_window_alignment() interface
2012-09-11PCI: Refactor pbus_size_mem()Gavin Shan1-13/+23
The original idea comes from Ram Pai. This patch puts the chunk of code for calculating the minimal alignment of memory window into a separate inline function. Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-09-11PCI: Align P2P windows using pcibios_window_alignment()Gavin Shan1-9/+6
This patch changes pbus_size_io() and pbus_size_mem() to do window (I/O, memory and prefetchable memory) reassignment based on the minimal alignments for the P2P bridge, which was retrieved by window_alignment(). [bhelgaas: changelog] Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-09-11PCI: Add weak pcibios_window_alignment() interfaceGavin Shan1-0/+32
This patch implements a weak function to return the default I/O or memory window alignment for a P2P bridge. By default, I/O windows are aligned to 4KiB or 1KiB and memory windows are aligned to 4MiB. Some platforms, e.g., powernv, have special alignment requirements and can override pcibios_window_alignment(). [bhelgaas: changelog] Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-09-10PCI: Drop bogus default from ARCH_SUPPORTS_MSIJan Beulich1-1/+0
Options without prompts and without dependencies don't usefully have a default value - they're intended to be selected from other options only. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-09-10PCI: cpqphp: Remove unreachable pathAlan Cox1-20/+1
register & 0x0B == 0x04 is never true, the code will always take the (identical) 0x00 path anyway. Remove the dead code paths. Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=44151 Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-09-10Merge branch 'pci/shengzhou-irq' into nextBjorn Helgaas1-4/+11
* pci/shengzhou-irq: PCI: Use dev->irq instead of dev->pin to enable non MSI/INTx interrupt
2012-09-10Merge branch 'pci/oliver-pciehp-resume' into nextBjorn Helgaas1-14/+14
* pci/oliver-pciehp-resume: PCI: pciehp: Always implement resume, regardless of pciehp_force param
2012-09-10Merge branch 'pci/feng-avoid-kmalloc' into nextBjorn Helgaas1-37/+18
* pci/feng-avoid-kmalloc: PCI: Remove the obsolete no_pci_devices() check PCI: Use pci_device_id on stack for pci_get_subsys/class() to avoid kmalloc
2012-09-10PCI: Remove the obsolete no_pci_devices() checkFeng Tang1-9/+0
In function pci_get_subsys() there is a check: /* * pci_find_subsys() can be called on the ide_setup() path, * super-early in boot. But the down_read() will enable local * interrupts, which can cause some machines to crash. So here we * detect and flag that situation and bail out early. */ if (unlikely(no_pci_devices())) return NULL; But there is no ide_setup() now, and no down_read() either, which makes the check obsolete. So remove it. Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-07PCI: pciehp: Always implement resume, regardless of pciehp_force paramOliver Neukum1-14/+14
Previously, the driver ignored resume unless the pciehp_force module_param was specified. On some laptops that means that interrupts are not delivered after S3, so card removals and insertions are not handled. This patch makes the driver handle resume regardless of pciehp_force. [bhelgaas: changelog] Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-09-07PCI: Make pci_error_handlers constStephen Hemminger3-10/+10
Since pci_error_handlers is just a function table make it const. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Linas Vepstas <linasvepstas@gmail.com>
2012-09-07PCI: Use dev->irq instead of dev->pin to enable non MSI/INTx interruptShengzhou Liu1-4/+11
On some platforms, root port has neither MSI/MSI-X nor INTx interrupt generated in RC mode. In this case, we have to use other interrupt, e.g., system shared interrupt, for port service IRQ to have AER, Hot-plug, etc., services work. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-24 18:27:07 +0000