summaryrefslogtreecommitdiff
path: root/arch/arm/mach-ux500/devices-common.h
AgeCommit message (Collapse)AuthorFilesLines
2012-11-08ARM: ux500: add PRCM register base for pinctrlJonas Aaberg1-1/+7
This adds the PRCM register range base as a resource to the pinctrl driver do we can break the dependency to the PRCMU driver and handle these registers in the driver alone. Cc: arm@kernel.org Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-09-14ARM: nomadik: move platform_data definitionsArnd Bergmann1-1/+1
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the nomadik include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: STEricsson <STEricsson_nomadik_linux@list.st.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Andreas Westin <andreas.westin@stericsson.com>
2012-07-09i2c-nomadik: turn the platform driver to an amba driverAlessandro Rubini1-17/+5
The i2c-nomadik gateware is really a PrimeCell APB device. By hosting the driver under the amba bus we can access it more easily, for example using the generic pci-amba driver. The patch also fixes the mach-ux500 users, so they register an amba device instead than a platform device. Signed-off-by: Alessandro Rubini <rubini@gnudd.com> Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@st.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-07-09i2c-nomadik: move header to <linux/platform_data/i2c-nomadik.h>Alessandro Rubini1-1/+1
The header and driver are only used by arm/mach-u8500 (and potentially arm/mach-nomadik), but the STA2X11 I/O Hub exports on PCIe a number of devices, including i2c-nomadik. This patch allows compilation of the driver under x86. Signed-off-by: Alessandro Rubini <rubini@gnudd.com> Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@st.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-05-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds1-0/+50
Pull crypto updates from Herbert Xu: - New cipher/hash driver for ARM ux500. - Code clean-up for aesni-intel. - Misc fixes. Fixed up conflicts in arch/arm/mach-ux500/devices-common.h, where quite frankly some of it made no sense at all (the pull brought in a declaration for the dbx500_add_platform_device_noirq() function, which neither exists nor is used anywhere). Also some trivial add-add context conflicts in the Kconfig file in drivers/{char/hw_random,crypto}/ * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: aesni-intel - move more common code to ablk_init_common crypto: aesni-intel - use crypto_[un]register_algs crypto: ux500 - Cleanup hardware identification crypto: ux500 - Update DMA handling for 3.4 mach-ux500: crypto - core support for CRYP/HASH module. crypto: ux500 - Add driver for HASH hardware crypto: ux500 - Add driver for CRYP hardware hwrng: Kconfig - modify default state for atmel-rng driver hwrng: omap - use devm_request_and_ioremap crypto: crypto4xx - move up err_request_irq label crypto, xor: Sanitize checksumming function selection output crypto: caam - add backward compatible string sec4.0
2012-05-22Merge tag 'pinctrl' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds1-0/+12
Pull arm soc-specific pinctrl changes from Olof Johansson: "With this, five platforms are moving to the relatively new pinctrl subsystem for their pin management, replacing the older soc specific in-kernel interfaces with common code. There is quite a bit of net addition of code for each platform being added to the pinctrl subsystem. But the payback comes later when adding new boards can be done by only providing new device trees instead." Fix up trivial conflicts in arch/arm/mach-ux500/{Makefile,board-mop500.c} * tag 'pinctrl' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (61 commits) mtd: nand: gpmi: fix compile error caused by pinctrl call ARM: PRIMA2: select PINCTRL and PINCTRL_SIRF in Kconfig ARM: nomadik: enable PINCTRL_NOMADIK where needed ARM: mxs: enable pinctrl support video: mxsfb: adopt pinctrl support ASoC: mxs-saif: adopt pinctrl support i2c: mxs: adopt pinctrl support mtd: nand: gpmi: adopt pinctrl support mmc: mxs-mmc: adopt pinctrl support serial: mxs-auart: adopt pinctrl support serial: amba-pl011: adopt pinctrl support spi/imx: adopt pinctrl support i2c: imx: adopt pinctrl support can: flexcan: adopt pinctrl support net: fec: adopt pinctrl support ARM: ux500: switch MSP to using pinctrl for pins ARM: ux500: alter MSP registration to return a device pointer ARM: ux500: switch to using pinctrl for uart0 ARM: ux500: delete custom pin control system ARM: ux500: switch over to Nomadik pinctrl driver ...
2012-05-15mach-ux500: crypto - core support for CRYP/HASH module.Andreas Westin1-0/+54
This adds the required platform data and calls to enable the CRYP/HASH driver. Signed-off-by: Andreas Westin <andreas.westin@stericsson.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2012-05-11pinctrl/nomadik: basic Nomadik pinctrl interfaceLinus Walleij1-0/+12
This adds a scratch pin control interface to the Nomadik pinctrl driver, and defines the pins and groups in the DB8500 ASIC. We define GPIO ranges to cover the pins exposed. The DB8500 has more pins than this but we restrict the driver to the pins that can be controlled from the combined GPIO and pin control hardware to begin with. ChangeLog v1->v2: - Base on the latest pinctrl development from pinctrl-mergebase-20120418 so we can get rid of legacy group count mechanism. Also drop the range checks for group index, this is handled by the core now. Acked-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-04-19ARM: 7372/1: ux500: factor out dynamic amba device allocatorLinus Walleij1-13/+10
This replaces the dynamic device allocator in the ux500 machine with the common device allocator in the bus code. Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-02-13ARM: ux500: remove intermediary add_platform_device* functionsLee Jones1-20/+26
These are no longer required since a 'parent' pointer is now passed to each registering device. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-02-13ARM: ux500: pass parent pointer to each platform deviceLee Jones1-18/+21
This patch provides a means for any device within ux500 platform code to allocate its own parent. This is particularly prudent with the introduction of /sys/devices/socX, as a device can now proclaim to be integral part of an SoC, rather than a more generic platform device. Latter patches make good use of this functionality. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-05-26ARM: 6830/1: mach-ux500: force PrimeCell revisionsLinus Walleij1-4/+6
The DB8500v2 and DB5500 has a fifth version of the "PL023" and PL180 blocks. However the ASIC engineers have forgot to bump the revision in the PrimeCell peripheral ID registers. Since the platform is aware of the actual silicon revision we need to hard-code the periphid from the platform, bumping the subrevision field to 1. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-03-14mach-ux500: config Ux500 PL011 PL022 PL180 for DMALinus Walleij1-2/+5
This will configure the platform data for the PL011, PL022 and PL180 (derivate) PrimeCells found in the Ux500 to use DMA with the generic DMA engine for DMA40. Signed-off-by: Per Forlin <per.forlin@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2010-12-08ux500: rework gpio registrationRabin Vincent1-0/+5
Rework gpio registration to remove build-time changing macros. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
2010-12-08ux500: rework device registrationRabin Vincent1-0/+77
Change the Ux500 devices to be dynamically allocated and added by calling functions instead of referencing structures, thereby allowing 5500 and other derivatives' support to be added without having to duplicate structures, use fixup functions, or use compile-time macros. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-20 00:06:11 +0000