summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/bluetooth/ath3k.c6
-rw-r--r--drivers/bluetooth/bt3c_cs.c3
-rw-r--r--drivers/bluetooth/btbcm.c132
-rw-r--r--drivers/bluetooth/btbcm.h61
-rw-r--r--drivers/bluetooth/btusb.c148
-rw-r--r--drivers/bluetooth/hci_ath.c1
-rw-r--r--drivers/bluetooth/hci_bcm.c107
-rw-r--r--drivers/bluetooth/hci_bcsp.c16
-rw-r--r--drivers/bluetooth/hci_h4.c1
-rw-r--r--drivers/bluetooth/hci_ldisc.c123
-rw-r--r--drivers/bluetooth/hci_uart.h11
-rw-r--r--drivers/bluetooth/hci_vhci.c2
-rw-r--r--drivers/net/ieee802154/at86rf230.c112
-rw-r--r--drivers/net/ieee802154/atusb.c101
-rw-r--r--drivers/net/ieee802154/cc2520.c151
-rw-r--r--drivers/net/ieee802154/fakelb.c5
-rw-r--r--drivers/net/ieee802154/mrf24j40.c10
17 files changed, 851 insertions, 139 deletions
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index 8c81af6dbe06..e527a3e13939 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -80,6 +80,7 @@ static const struct usb_device_id ath3k_table[] = {
{ USB_DEVICE(0x0489, 0xe057) },
{ USB_DEVICE(0x0489, 0xe056) },
{ USB_DEVICE(0x0489, 0xe05f) },
+ { USB_DEVICE(0x0489, 0xe076) },
{ USB_DEVICE(0x0489, 0xe078) },
{ USB_DEVICE(0x04c5, 0x1330) },
{ USB_DEVICE(0x04CA, 0x3004) },
@@ -88,6 +89,7 @@ static const struct usb_device_id ath3k_table[] = {
{ USB_DEVICE(0x04CA, 0x3007) },
{ USB_DEVICE(0x04CA, 0x3008) },
{ USB_DEVICE(0x04CA, 0x300b) },
+ { USB_DEVICE(0x04CA, 0x300d) },
{ USB_DEVICE(0x04CA, 0x300f) },
{ USB_DEVICE(0x04CA, 0x3010) },
{ USB_DEVICE(0x0930, 0x0219) },
@@ -113,6 +115,7 @@ static const struct usb_device_id ath3k_table[] = {
{ USB_DEVICE(0x13d3, 0x3408) },
{ USB_DEVICE(0x13d3, 0x3423) },
{ USB_DEVICE(0x13d3, 0x3432) },
+ { USB_DEVICE(0x13d3, 0x3474) },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE02C) },
@@ -137,6 +140,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0489, 0xe076), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe078), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
@@ -145,6 +149,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
{ USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x04ca, 0x300d), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x300f), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
@@ -170,6 +175,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
{ USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x13d3, 0x3474), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU22 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE036), .driver_info = BTUSB_ATH3012 },
diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c
index 6de97b3871b0..7aab65427d38 100644
--- a/drivers/bluetooth/bt3c_cs.c
+++ b/drivers/bluetooth/bt3c_cs.c
@@ -202,9 +202,8 @@ static void bt3c_write_wakeup(struct bt3c_info *info)
/* Send frame */
len = bt3c_write(iobase, 256, skb->data, skb->len);
- if (len != skb->len) {
+ if (len != skb->len)
BT_ERR("Very strange");
- }
kfree_skb(skb);
diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c
index 728fce38a5a2..1e1a4323a71f 100644
--- a/drivers/bluetooth/btbcm.c
+++ b/drivers/bluetooth/btbcm.c
@@ -33,6 +33,7 @@
#define VERSION "0.1"
#define BDADDR_BCM20702A0 (&(bdaddr_t) {{0x00, 0xa0, 0x02, 0x70, 0x20, 0x00}})
+#define BDADDR_BCM4324B3 (&(bdaddr_t) {{0x00, 0x00, 0x00, 0xb3, 0x24, 0x43}})
int btbcm_check_bdaddr(struct hci_dev *hdev)
{
@@ -56,10 +57,18 @@ int btbcm_check_bdaddr(struct hci_dev *hdev)
bda = (struct hci_rp_read_bd_addr *)skb->data;
- /* The address 00:20:70:02:A0:00 indicates a BCM20702A0 controller
+ /* Check if the address indicates a controller with either an
+ * invalid or default address. In both cases the device needs
+ * to be marked as not having a valid address.
+ *
+ * The address 00:20:70:02:A0:00 indicates a BCM20702A0 controller
* with no configured address.
+ *
+ * The address 43:24:B3:00:00:00 indicates a BCM4324B3 controller
+ * with waiting for configuration state.
*/
- if (!bacmp(&bda->bdaddr, BDADDR_BCM20702A0)) {
+ if (!bacmp(&bda->bdaddr, BDADDR_BCM20702A0) ||
+ !bacmp(&bda->bdaddr, BDADDR_BCM4324B3)) {
BT_INFO("%s: BCM: Using default device address (%pMR)",
hdev->name, &bda->bdaddr);
set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
@@ -89,21 +98,14 @@ int btbcm_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
}
EXPORT_SYMBOL_GPL(btbcm_set_bdaddr);
-int btbcm_patchram(struct hci_dev *hdev, const char *firmware)
+int btbcm_patchram(struct hci_dev *hdev, const struct firmware *fw)
{
const struct hci_command_hdr *cmd;
- const struct firmware *fw;
const u8 *fw_ptr;
size_t fw_size;
struct sk_buff *skb;
u16 opcode;
- int err;
-
- err = request_firmware(&fw, firmware, &hdev->dev);
- if (err < 0) {
- BT_INFO("%s: BCM: Patch %s not found", hdev->name, firmware);
- return err;
- }
+ int err = 0;
/* Start Download */
skb = __hci_cmd_sync(hdev, 0xfc2e, 0, NULL, HCI_INIT_TIMEOUT);
@@ -129,8 +131,7 @@ int btbcm_patchram(struct hci_dev *hdev, const char *firmware)
fw_size -= sizeof(*cmd);
if (fw_size < cmd->plen) {
- BT_ERR("%s: BCM: Patch %s is corrupted", hdev->name,
- firmware);
+ BT_ERR("%s: BCM: Patch is corrupted", hdev->name);
err = -EINVAL;
goto done;
}
@@ -156,7 +157,6 @@ int btbcm_patchram(struct hci_dev *hdev, const char *firmware)
msleep(250);
done:
- release_firmware(fw);
return err;
}
EXPORT_SYMBOL(btbcm_patchram);
@@ -242,9 +242,101 @@ static const struct {
const char *name;
} bcm_uart_subver_table[] = {
{ 0x410e, "BCM43341B0" }, /* 002.001.014 */
+ { 0x4406, "BCM4324B3" }, /* 002.004.006 */
+ { 0x610c, "BCM4354" }, /* 003.001.012 */
{ }
};
+int btbcm_initialize(struct hci_dev *hdev, char *fw_name, size_t len)
+{
+ u16 subver, rev;
+ const char *hw_name = NULL;
+ struct sk_buff *skb;
+ struct hci_rp_read_local_version *ver;
+ int i, err;
+
+ /* Reset */
+ err = btbcm_reset(hdev);
+ if (err)
+ return err;
+
+ /* Read Local Version Info */
+ skb = btbcm_read_local_version(hdev);
+ if (IS_ERR(skb))
+ return PTR_ERR(skb);
+
+ ver = (struct hci_rp_read_local_version *)skb->data;
+ rev = le16_to_cpu(ver->hci_rev);
+ subver = le16_to_cpu(ver->lmp_subver);
+ kfree_skb(skb);
+
+ /* Read Verbose Config Version Info */
+ skb = btbcm_read_verbose_config(hdev);
+ if (IS_ERR(skb))
+ return PTR_ERR(skb);
+
+ BT_INFO("%s: BCM: chip id %u", hdev->name, skb->data[1]);
+ kfree_skb(skb);
+
+ switch ((rev & 0xf000) >> 12) {
+ case 0:
+ case 1:
+ case 3:
+ for (i = 0; bcm_uart_subver_table[i].name; i++) {
+ if (subver == bcm_uart_subver_table[i].subver) {
+ hw_name = bcm_uart_subver_table[i].name;
+ break;
+ }
+ }
+
+ snprintf(fw_name, len, "brcm/%s.hcd", hw_name ? : "BCM");
+ break;
+ default:
+ return 0;
+ }
+
+ BT_INFO("%s: %s (%3.3u.%3.3u.%3.3u) build %4.4u", hdev->name,
+ hw_name ? : "BCM", (subver & 0x7000) >> 13,
+ (subver & 0x1f00) >> 8, (subver & 0x00ff), rev & 0x0fff);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(btbcm_initialize);
+
+int btbcm_finalize(struct hci_dev *hdev)
+{
+ struct sk_buff *skb;
+ struct hci_rp_read_local_version *ver;
+ u16 subver, rev;
+ int err;
+
+ /* Reset */
+ err = btbcm_reset(hdev);
+ if (err)
+ return err;
+
+ /* Read Local Version Info */
+ skb = btbcm_read_local_version(hdev);
+ if (IS_ERR(skb))
+ return PTR_ERR(skb);
+
+ ver = (struct hci_rp_read_local_version *)skb->data;
+ rev = le16_to_cpu(ver->hci_rev);
+ subver = le16_to_cpu(ver->lmp_subver);
+ kfree_skb(skb);
+
+ BT_INFO("%s: BCM (%3.3u.%3.3u.%3.3u) build %4.4u", hdev->name,
+ (subver & 0x7000) >> 13, (subver & 0x1f00) >> 8,
+ (subver & 0x00ff), rev & 0x0fff);
+
+ btbcm_check_bdaddr(hdev);
+
+ set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(btbcm_finalize);
+
static const struct {
u16 subver;
const char *name;
@@ -265,6 +357,7 @@ static const struct {
int btbcm_setup_patchram(struct hci_dev *hdev)
{
char fw_name[64];
+ const struct firmware *fw;
u16 subver, rev, pid, vid;
const char *hw_name = NULL;
struct sk_buff *skb;
@@ -296,6 +389,7 @@ int btbcm_setup_patchram(struct hci_dev *hdev)
switch ((rev & 0xf000) >> 12) {
case 0:
+ case 3:
for (i = 0; bcm_uart_subver_table[i].name; i++) {
if (subver == bcm_uart_subver_table[i].subver) {
hw_name = bcm_uart_subver_table[i].name;
@@ -335,9 +429,15 @@ int btbcm_setup_patchram(struct hci_dev *hdev)
hw_name ? : "BCM", (subver & 0x7000) >> 13,
(subver & 0x1f00) >> 8, (subver & 0x00ff), rev & 0x0fff);
- err = btbcm_patchram(hdev, fw_name);
- if (err == -ENOENT)
+ err = request_firmware(&fw, fw_name, &hdev->dev);
+ if (err < 0) {
+ BT_INFO("%s: BCM: Patch %s not found", hdev->name, fw_name);
return 0;
+ }
+
+ btbcm_patchram(hdev, fw);
+
+ release_firmware(fw);
/* Reset */
err = btbcm_reset(hdev);
diff --git a/drivers/bluetooth/btbcm.h b/drivers/bluetooth/btbcm.h
index eb6ab5f9483d..d9e6b41658e5 100644
--- a/drivers/bluetooth/btbcm.h
+++ b/drivers/bluetooth/btbcm.h
@@ -21,15 +21,61 @@
*
*/
+#define BCM_UART_CLOCK_48MHZ 0x01
+#define BCM_UART_CLOCK_24MHZ 0x02
+
+struct bcm_update_uart_baud_rate {
+ __le16 zero;
+ __le32 baud_rate;
+} __packed;
+
+struct bcm_write_uart_clock_setting {
+ __u8 type;
+} __packed;
+
+struct bcm_set_sleep_mode {
+ __u8 sleep_mode;
+ __u8 idle_host;
+ __u8 idle_dev;
+ __u8 bt_wake_active;
+ __u8 host_wake_active;
+ __u8 allow_host_sleep;
+ __u8 combine_modes;
+ __u8 tristate_control;
+ __u8 usb_auto_sleep;
+ __u8 usb_resume_timeout;
+ __u8 pulsed_host_wake;
+ __u8 break_to_host;
+} __packed;
+
+struct bcm_set_pcm_int_params {
+ __u8 routing;
+ __u8 rate;
+ __u8 frame_sync;
+ __u8 sync_mode;
+ __u8 clock_mode;
+} __packed;
+
+struct bcm_set_pcm_format_params {
+ __u8 lsb_first;
+ __u8 fill_value;
+ __u8 fill_method;
+ __u8 fill_num;
+ __u8 right_justify;
+} __packed;
+
#if IS_ENABLED(CONFIG_BT_BCM)
int btbcm_check_bdaddr(struct hci_dev *hdev);
int btbcm_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
-int btbcm_patchram(struct hci_dev *hdev, const char *firmware);
+int btbcm_patchram(struct hci_dev *hdev, const struct firmware *fw);
int btbcm_setup_patchram(struct hci_dev *hdev);
int btbcm_setup_apple(struct hci_dev *hdev);
+int btbcm_initialize(struct hci_dev *hdev, char *fw_name, size_t len);
+int btbcm_finalize(struct hci_dev *hdev);
+
#else
static inline int btbcm_check_bdaddr(struct hci_dev *hdev)
@@ -42,7 +88,7 @@ static inline int btbcm_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
return -EOPNOTSUPP;
}
-static inline int btbcm_patchram(struct hci_dev *hdev, const char *firmware)
+static inline int btbcm_patchram(struct hci_dev *hdev, const struct firmware *fw)
{
return -EOPNOTSUPP;
}
@@ -57,4 +103,15 @@ static inline int btbcm_setup_apple(struct hci_dev *hdev)
return 0;
}
+static inline int btbcm_initialize(struct hci_dev *hdev, char *fw_name,
+ size_t len)
+{
+ return 0;
+}
+
+static inline int btbcm_finalize(struct hci_dev *hdev)
+{
+ return 0;
+}
+
#endif
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 94c6c048130f..b4cf8d9c9dac 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -179,6 +179,7 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x0489, 0xe056), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe057), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe05f), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0489, 0xe076), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0489, 0xe078), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04c5, 0x1330), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
@@ -187,6 +188,7 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x04ca, 0x300d), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x300f), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3010), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
@@ -212,6 +214,7 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3423), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3432), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x13d3, 0x3474), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
@@ -266,7 +269,7 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x0e5e, 0x6622), .driver_info = BTUSB_BROKEN_ISOC },
/* Roper Class 1 Bluetooth Dongle (Silicon Wave based) */
- { USB_DEVICE(0x1300, 0x0001), .driver_info = BTUSB_SWAVE },
+ { USB_DEVICE(0x1310, 0x0001), .driver_info = BTUSB_SWAVE },
/* Digianswer devices */
{ USB_DEVICE(0x08fd, 0x0001), .driver_info = BTUSB_DIGIANSWER },
@@ -1300,28 +1303,6 @@ static void btusb_waker(struct work_struct *work)
usb_autopm_put_interface(data->intf);
}
-static struct sk_buff *btusb_read_local_version(struct hci_dev *hdev)
-{
- struct sk_buff *skb;
-
- skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL,
- HCI_INIT_TIMEOUT);
- if (IS_ERR(skb)) {
- BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION failed (%ld)",
- hdev->name, PTR_ERR(skb));
- return skb;
- }
-
- if (skb->len != sizeof(struct hci_rp_read_local_version)) {
- BT_ERR("%s: HCI_OP_READ_LOCAL_VERSION event length mismatch",
- hdev->name);
- kfree_skb(skb);
- return ERR_PTR(-EIO);
- }
-
- return skb;
-}
-
static int btusb_setup_bcm92035(struct hci_dev *hdev)
{
struct sk_buff *skb;
@@ -1342,36 +1323,40 @@ static int btusb_setup_csr(struct hci_dev *hdev)
{
struct hci_rp_read_local_version *rp;
struct sk_buff *skb;
- int ret;
BT_DBG("%s", hdev->name);
- skb = btusb_read_local_version(hdev);
- if (IS_ERR(skb))
- return -PTR_ERR(skb);
+ skb = __hci_cmd_sync(hdev, HCI_OP_READ_LOCAL_VERSION, 0, NULL,
+ HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ int err = PTR_ERR(skb);
+ BT_ERR("%s: CSR: Local version failed (%d)", hdev->name, err);
+ return err;
+ }
+
+ if (skb->len != sizeof(struct hci_rp_read_local_version)) {
+ BT_ERR("%s: CSR: Local version length mismatch", hdev->name);
+ kfree_skb(skb);
+ return -EIO;
+ }
rp = (struct hci_rp_read_local_version *)skb->data;
- if (!rp->status) {
- if (le16_to_cpu(rp->manufacturer) != 10) {
- /* Clear the reset quirk since this is not an actual
- * early Bluetooth 1.1 device from CSR.
- */
- clear_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
+ if (le16_to_cpu(rp->manufacturer) != 10) {
+ /* Clear the reset quirk since this is not an actual
+ * early Bluetooth 1.1 device from CSR.
+ */
+ clear_bit(HCI_QUIRK_RESET_ON_CLOSE, &hdev->quirks);
- /* These fake CSR controllers have all a broken
- * stored link key handling and so just disable it.
- */
- set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY,
- &hdev->quirks);
- }
+ /* These fake CSR controllers have all a broken
+ * stored link key handling and so just disable it.
+ */
+ set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks);
}
- ret = -bt_to_errno(rp->status);
-
kfree_skb(skb);
- return ret;
+ return 0;
}
static const struct firmware *btusb_setup_intel_get_fw(struct hci_dev *hdev,
@@ -1614,6 +1599,8 @@ static int btusb_setup_intel(struct hci_dev *hdev)
}
fw_ptr = fw->data;
+ kfree_skb(skb);
+
/* This Intel specific command enables the manufacturer mode of the
* controller.
*
@@ -1946,6 +1933,7 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
struct intel_boot_params *params;
const struct firmware *fw;
const u8 *fw_ptr;
+ u32 frag_len;
char fwname[64];
ktime_t calltime, delta, rettime;
unsigned long long duration;
@@ -2096,6 +2084,12 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
BT_INFO("%s: Found device firmware: %s", hdev->name, fwname);
+ /* Save the DDC file name for later use to apply once the firmware
+ * downloading is done.
+ */
+ snprintf(fwname, sizeof(fwname), "intel/ibt-11-%u.ddc",
+ le16_to_cpu(params->dev_revid));
+
kfree_skb(skb);
if (fw->size < 644) {
@@ -2138,24 +2132,33 @@ static int btusb_setup_intel_new(struct hci_dev *hdev)
}
fw_ptr = fw->data + 644;
+ frag_len = 0;
while (fw_ptr - fw->data < fw->size) {
- struct hci_command_hdr *cmd = (void *)fw_ptr;
- u8 cmd_len;
+ struct hci_command_hdr *cmd = (void *)(fw_ptr + frag_len);
- cmd_len = sizeof(*cmd) + cmd->plen;
+ frag_len += sizeof(*cmd) + cmd->plen;
- /* Send each command from the firmware data buffer as
- * a single Data fragment.
+ /* The paramter length of the secure send command requires
+ * a 4 byte alignment. It happens so that the firmware file
+ * contains proper Intel_NOP commands to align the fragments
+ * as needed.
+ *
+ * Send set of commands with 4 byte alignment from the
+ * firmware data buffer as a single Data fragement.
*/
- err = btusb_intel_secure_send(hdev, 0x01, cmd_len, fw_ptr);
- if (err < 0) {
- BT_ERR("%s: Failed to send firmware data (%d)",
- hdev->name, err);
- goto done;
- }
+ if (!(frag_len % 4)) {
+ err = btusb_intel_secure_send(hdev, 0x01, frag_len,
+ fw_ptr);
+ if (err < 0) {
+ BT_ERR("%s: Failed to send firmware data (%d)",
+ hdev->name, err);
+ goto done;
+ }
- fw_ptr += cmd_len;
+ fw_ptr += frag_len;
+ frag_len = 0;
+ }
}
set_bit(BTUSB_FIRMWARE_LOADED, &data->flags);
@@ -2248,6 +2251,43 @@ done:
clear_bit(BTUSB_BOOTLOADER, &data->flags);
+ /* Once the device is running in operational mode, it needs to apply
+ * the device configuration (DDC) parameters.
+ *
+ * The device can work without DDC parameters, so even if it fails
+ * to load the file, no need to fail the setup.
+ */
+ err = request_firmware_direct(&fw, fwname, &hdev->dev);
+ if (err < 0)
+ return 0;
+
+ BT_INFO("%s: Found Intel DDC parameters: %s", hdev->name, fwname);
+
+ fw_ptr = fw->data;
+
+ /* DDC file contains one or more DDC structure which has
+ * Length (1 byte), DDC ID (2 bytes), and DDC value (Length - 2).
+ */
+ while (fw->size > fw_ptr - fw->data) {
+ u8 cmd_plen = fw_ptr[0] + sizeof(u8);
+
+ skb = __hci_cmd_sync(hdev, 0xfc8b, cmd_plen, fw_ptr,
+ HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ BT_ERR("%s: Failed to send Intel_Write_DDC (%ld)",
+ hdev->name, PTR_ERR(skb));
+ release_firmware(fw);
+ return PTR_ERR(skb);
+ }
+
+ fw_ptr += cmd_plen;
+ kfree_skb(skb);
+ }
+
+ release_firmware(fw);
+
+ BT_INFO("%s: Applying Intel DDC parameters completed", hdev->name);
+
return 0;
}
diff --git a/drivers/bluetooth/hci_ath.c b/drivers/bluetooth/hci_ath.c
index ec8fa0e0f036..6da5e4ca13ea 100644
--- a/drivers/bluetooth/hci_ath.c
+++ b/drivers/bluetooth/hci_ath.c
@@ -192,6 +192,7 @@ static int ath_recv(struct hci_uart *hu, const void *data, int count)
if (IS_ERR(ath->rx_skb)) {
int err = PTR_ERR(ath->rx_skb);
BT_ERR("%s: Frame reassembly failed (%d)", hu->hdev->name, err);
+ ath->rx_skb = NULL;
return err;
}
diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
index 1ec0b4a5ffa6..23523e140a9a 100644
--- a/drivers/bluetooth/hci_bcm.c
+++ b/drivers/bluetooth/hci_bcm.c
@@ -24,6 +24,7 @@
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/skbuff.h>
+#include <linux/firmware.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
@@ -36,6 +37,55 @@ struct bcm_data {
struct sk_buff_head txq;
};
+static int bcm_set_baudrate(struct hci_uart *hu, unsigned int speed)
+{
+ struct hci_dev *hdev = hu->hdev;
+ struct sk_buff *skb;
+ struct bcm_update_uart_baud_rate param;
+
+ if (speed > 3000000) {
+ struct bcm_write_uart_clock_setting clock;
+
+ clock.type = BCM_UART_CLOCK_48MHZ;
+
+ BT_DBG("%s: Set Controller clock (%d)", hdev->name, clock.type);
+
+ /* This Broadcom specific command changes the UART's controller
+ * clock for baud rate > 3000000.
+ */
+ skb = __hci_cmd_sync(hdev, 0xfc45, 1, &clock, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ int err = PTR_ERR(skb);
+ BT_ERR("%s: BCM: failed to write clock command (%d)",
+ hdev->name, err);
+ return err;
+ }
+
+ kfree_skb(skb);
+ }
+
+ BT_DBG("%s: Set Controller UART speed to %d bit/s", hdev->name, speed);
+
+ param.zero = cpu_to_le16(0);
+ param.baud_rate = cpu_to_le32(speed);
+
+ /* This Broadcom specific command changes the UART's controller baud
+ * rate.
+ */
+ skb = __hci_cmd_sync(hdev, 0xfc18, sizeof(param), &param,
+ HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ int err = PTR_ERR(skb);
+ BT_ERR("%s: BCM: failed to write update baudrate command (%d)",
+ hdev->name, err);
+ return err;
+ }
+
+ kfree_skb(skb);
+
+ return 0;
+}
+
static int bcm_open(struct hci_uart *hu)
{
struct bcm_data *bcm;
@@ -79,11 +129,62 @@ static int bcm_flush(struct hci_uart *hu)
static int bcm_setup(struct hci_uart *hu)
{
+ char fw_name[64];
+ const struct firmware *fw;
+ unsigned int speed;
+ int err;
+
BT_DBG("hu %p", hu);
hu->hdev->set_bdaddr = btbcm_set_bdaddr;
- return btbcm_setup_patchram(hu->hdev);
+ err = btbcm_initialize(hu->hdev, fw_name, sizeof(fw_name));
+ if (err)
+ return err;
+
+ err = request_firmware(&fw, fw_name, &hu->hdev->dev);
+ if (err < 0) {
+ BT_INFO("%s: BCM: Patch %s not found", hu->hdev->name, fw_name);
+ return 0;
+ }
+
+ err = btbcm_patchram(hu->hdev, fw);
+ if (err) {
+ BT_INFO("%s: BCM: Patch failed (%d)", hu->hdev->name, err);
+ goto finalize;
+ }
+
+ /* Init speed if any */
+ if (hu->init_speed)
+ speed = hu->init_speed;
+ else if (hu->proto->init_speed)
+ speed = hu->proto->init_speed;
+ else
+ speed = 0;
+
+ if (speed)
+ hci_uart_set_baudrate(hu, speed);
+
+ /* Operational speed if any */
+ if (hu->oper_speed)
+ speed = hu->oper_speed;
+ else if (hu->proto->oper_speed)
+ speed = hu->proto->oper_speed;
+ else
+ speed = 0;
+
+ if (speed) {
+ err = bcm_set_baudrate(hu, speed);
+ if (!err)
+ hci_uart_set_baudrate(hu, speed);
+ }
+
+finalize:
+ release_firmware(fw);
+
+ err = btbcm_finalize(hu->hdev);
+
+ return err;
}
static const struct h4_recv_pkt bcm_recv_pkts[] = {
@@ -104,6 +205,7 @@ static int bcm_recv(struct hci_uart *hu, const void *data, int count)
if (IS_ERR(bcm->rx_skb)) {
int err = PTR_ERR(bcm->rx_skb);
BT_ERR("%s: Frame reassembly failed (%d)", hu->hdev->name, err);
+ bcm->rx_skb = NULL;
return err;
}
@@ -133,10 +235,13 @@ static struct sk_buff *bcm_dequeue(struct hci_uart *hu)
static const struct hci_uart_proto bcm_proto = {
.id = HCI_UART_BCM,
.name = "BCM",
+ .init_speed = 115200,
+ .oper_speed = 4000000,
.open = bcm_open,
.close = bcm_close,
.flush = bcm_flush,
.setup = bcm_setup,
+ .set_baudrate = bcm_set_baudrate,
.recv = bcm_recv,
.enqueue = bcm_enqueue,
.dequeue = bcm_dequeue,
diff --git a/drivers/bluetooth/hci_bcsp.c b/drivers/bluetooth/hci_bcsp.c
index fc0056a28b81..d0b615a932d1 100644
--- a/drivers/bluetooth/hci_bcsp.c
+++ b/drivers/bluetooth/hci_bcsp.c
@@ -436,7 +436,7 @@ static inline void bcsp_unslip_one_byte(struct bcsp_struct *bcsp, unsigned char
break;
default:
memcpy(skb_put(bcsp->rx_skb, 1), &byte, 1);
- if ((bcsp->rx_skb-> data[0] & 0x40) != 0 &&
+ if ((bcsp->rx_skb->data[0] & 0x40) != 0 &&
bcsp->rx_state != BCSP_W4_CRC)
bcsp_crc_update(&bcsp->message_crc, byte);
bcsp->rx_count--;
@@ -447,24 +447,24 @@ static inline void bcsp_unslip_one_byte(struct bcsp_struct *bcsp, unsigned char
switch (byte) {
case 0xdc:
memcpy(skb_put(bcsp->rx_skb, 1), &c0, 1);
- if ((bcsp->rx_skb-> data[0] & 0x40) != 0 &&
+ if ((bcsp->rx_skb->data[0] & 0x40) != 0 &&
bcsp->rx_state != BCSP_W4_CRC)
- bcsp_crc_update(&bcsp-> message_crc, 0xc0);
+ bcsp_crc_update(&bcsp->message_crc, 0xc0);
bcsp->rx_esc_state = BCSP_ESCSTATE_NOESC;
bcsp->rx_count--;
break;
case 0xdd:
memcpy(skb_put(bcsp->rx_skb, 1), &db, 1);
- if ((bcsp->rx_skb-> data[0] & 0x40) != 0 &&
+ if ((bcsp->rx_skb->data[0] & 0x40) != 0 &&
bcsp->rx_state != BCSP_W4_CRC)
- bcsp_crc_update(&bcsp-> message_crc, 0xdb);
+ bcsp_crc_update(&bcsp->message_crc, 0xdb);
bcsp->rx_esc_state = BCSP_ESCSTATE_NOESC;
bcsp->rx_count--;
break;
default:
- BT_ERR ("Invalid byte %02x after esc byte", byte);
+ BT_ERR("Invalid byte %02x after esc byte", byte);
kfree_skb(bcsp->rx_skb);
bcsp->rx_skb = NULL;
bcsp->rx_state = BCSP_W4_PKT_DELIMITER;
@@ -527,7 +527,7 @@ static void bcsp_complete_rx_pkt(struct hci_uart *hu)
hci_recv_frame(hu->hdev, bcsp->rx_skb);
} else {
- BT_ERR ("Packet for unknown channel (%u %s)",
+ BT_ERR("Packet for unknown channel (%u %s)",
bcsp->rx_skb->data[1] & 0x0f,
bcsp->rx_skb->data[0] & 0x80 ?
"reliable" : "unreliable");
@@ -587,7 +587,7 @@ static int bcsp_recv(struct hci_uart *hu, const void *data, int count)
}
if (bcsp->rx_skb->data[0] & 0x80 /* reliable pkt */
&& (bcsp->rx_skb->data[0] & 0x07) != bcsp->rxseq_txack) {
- BT_ERR ("Out-of-order packet arrived, got %u expected %u",
+ BT_ERR("Out-of-order packet arrived, got %u expected %u",
bcsp->rx_skb->data[0] & 0x07, bcsp->rxseq_txack);
kfree_skb(bcsp->rx_skb);
diff --git a/drivers/bluetooth/hci_h4.c b/drivers/bluetooth/hci_h4.c
index f7190f01e135..57faddc53645 100644
--- a/drivers/bluetooth/hci_h4.c
+++ b/drivers/bluetooth/hci_h4.c
@@ -133,6 +133,7 @@ static int h4_recv(struct hci_uart *hu, const void *data, int count)
if (IS_ERR(h4->rx_skb)) {
int err = PTR_ERR(h4->rx_skb);
BT_ERR("%s: Frame reassembly failed (%d)", hu->hdev->name, err);
+ h4->rx_skb = NULL;
return err;
}
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index 5c9a73f02664..177dd69fdd95 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -40,6 +40,7 @@
#include <linux/signal.h>
#include <linux/ioctl.h>
#include <linux/skbuff.h>
+#include <linux/firmware.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
@@ -265,11 +266,133 @@ static int hci_uart_send_frame(struct hci_dev *hdev, struct sk_buff *skb)
return 0;
}
+/* Flow control or un-flow control the device */
+void hci_uart_set_flow_control(struct hci_uart *hu, bool enable)
+{
+ struct tty_struct *tty = hu->tty;
+ struct ktermios ktermios;
+ int status;
+ unsigned int set = 0;
+ unsigned int clear = 0;
+
+ if (enable) {
+ /* Disable hardware flow control */
+ ktermios = tty->termios;
+ ktermios.c_cflag &= ~CRTSCTS;
+ status = tty_set_termios(tty, &ktermios);
+ BT_DBG("Disabling hardware flow control: %s",
+ status ? "failed" : "success");
+
+ /* Clear RTS to prevent the device from sending */
+ /* Most UARTs need OUT2 to enable interrupts */
+ status = tty->driver->ops->tiocmget(tty);
+ BT_DBG("Current tiocm 0x%x", status);
+
+ set &= ~(TIOCM_OUT2 | TIOCM_RTS);
+ clear = ~set;
+ set &= TIOCM_DTR | TIOCM_RTS | TIOCM_OUT1 |
+ TIOCM_OUT2 | TIOCM_LOOP;
+ clear &= TIOCM_DTR | TIOCM_RTS | TIOCM_OUT1 |
+ TIOCM_OUT2 | TIOCM_LOOP;
+ status = tty->driver->ops->tiocmset(tty, set, clear);
+ BT_DBG("Clearing RTS: %s", status ? "failed" : "success");
+ } else {
+ /* Set RTS to allow the device to send again */
+ status = tty->driver->ops->tiocmget(tty);
+ BT_DBG("Current tiocm 0x%x", status);
+
+ set |= (TIOCM_OUT2 | TIOCM_RTS);
+ clear = ~set;
+ set &= TIOCM_DTR | TIOCM_RTS | TIOCM_OUT1 |
+ TIOCM_OUT2 | TIOCM_LOOP;
+ clear &= TIOCM_DTR | TIOCM_RTS | TIOCM_OUT1 |
+ TIOCM_OUT2 | TIOCM_LOOP;
+ status = tty->driver->ops->tiocmset(tty, set, clear);
+ BT_DBG("Setting RTS: %s", status ? "failed" : "success");
+
+ /* Re-enable hardware flow control */
+ ktermios = tty->termios;
+ ktermios.c_cflag |= CRTSCTS;
+ status = tty_set_termios(tty, &ktermios);
+ BT_DBG("Enabling hardware flow control: %s",
+ status ? "failed" : "success");
+ }
+}
+
+void hci_uart_set_speeds(struct hci_uart *hu, unsigned int init_speed,
+ unsigned int oper_speed)
+{
+ hu->init_speed = init_speed;
+ hu->oper_speed = oper_speed;
+}
+
+void hci_uart_init_tty(struct hci_uart *hu)
+{
+ struct tty_struct *tty = hu->tty;
+ struct ktermios ktermios;
+
+ /* Bring the UART into a known 8 bits no parity hw fc state */
+ ktermios = tty->termios;
+ ktermios.c_iflag &= ~(IGNBRK | BRKINT | PARMRK | ISTRIP |
+ INLCR | IGNCR | ICRNL | IXON);
+ ktermios.c_oflag &= ~OPOST;
+ ktermios.c_lflag &= ~(ECHO | ECHONL | ICANON | ISIG | IEXTEN);
+ ktermios.c_cflag &= ~(CSIZE | PARENB);
+ ktermios.c_cflag |= CS8;
+ ktermios.c_cflag |= CRTSCTS;
+
+ /* tty_set_termios() return not checked as it is always 0 */
+ tty_set_termios(tty, &ktermios);
+}
+
+void hci_uart_set_baudrate(struct hci_uart *hu, unsigned int speed)
+{
+ struct tty_struct *tty = hu->tty;
+ struct ktermios ktermios;
+
+ ktermios = tty->termios;
+ ktermios.c_cflag &= ~CBAUD;
+ tty_termios_encode_baud_rate(&ktermios, speed, speed);
+
+ /* tty_set_termios() return not checked as it is always 0 */
+ tty_set_termios(tty, &ktermios);
+
+ BT_DBG("%s: New tty speeds: %d/%d", hu->hdev->name,
+ tty->termios.c_ispeed, tty->termios.c_ospeed);
+}
+
static int hci_uart_setup(struct hci_dev *hdev)
{
struct hci_uart *hu = hci_get_drvdata(hdev);
struct hci_rp_read_local_version *ver;
struct sk_buff *skb;
+ unsigned int speed;
+ int err;
+
+ /* Init speed if any */
+ if (hu->init_speed)
+ speed = hu->init_speed;
+ else if (hu->proto->init_speed)
+ speed = hu->proto->init_speed;
+ else
+ speed = 0;
+
+ if (speed)
+ hci_uart_set_baudrate(hu, speed);
+
+ /* Operational speed if any */
+ if (hu->oper_speed)
+ speed = hu->oper_speed;
+ else if (hu->proto->oper_speed)
+ speed = hu->proto->oper_speed;
+ else
+ speed = 0;
+
+ if (hu->proto->set_baudrate && speed) {
+ err = hu->proto->set_baudrate(hu, speed);
+ if (!err)
+ hci_uart_set_baudrate(hu, speed);
+ }
if (hu->proto->setup)
return hu->proto->setup(hu);
diff --git a/drivers/bluetooth/hci_uart.h b/drivers/bluetooth/hci_uart.h
index 72120a5ba13c..ce9c670956f5 100644
--- a/drivers/bluetooth/hci_uart.h
+++ b/drivers/bluetooth/hci_uart.h
@@ -58,10 +58,13 @@ struct hci_uart;
struct hci_uart_proto {
unsigned int id;
const char *name;
+ unsigned int init_speed;
+ unsigned int oper_speed;
int (*open)(struct hci_uart *hu);
int (*close)(struct hci_uart *hu);
int (*flush)(struct hci_uart *hu);
int (*setup)(struct hci_uart *hu);
+ int (*set_baudrate)(struct hci_uart *hu, unsigned int speed);
int (*recv)(struct hci_uart *hu, const void *data, int len);
int (*enqueue)(struct hci_uart *hu, struct sk_buff *skb);
struct sk_buff *(*dequeue)(struct hci_uart *hu);
@@ -82,6 +85,9 @@ struct hci_uart {
struct sk_buff *tx_skb;
unsigned long tx_state;
spinlock_t rx_lock;
+
+ unsigned int init_speed;
+ unsigned int oper_speed;
};
/* HCI_UART proto flag bits */
@@ -96,6 +102,11 @@ int hci_uart_register_proto(const struct hci_uart_proto *p);
int hci_uart_unregister_proto(const struct hci_uart_proto *p);
int hci_uart_tx_wakeup(struct hci_uart *hu);
int hci_uart_init_ready(struct hci_uart *hu);
+void hci_uart_init_tty(struct hci_uart *hu);
+void hci_uart_set_baudrate(struct hci_uart *hu, unsigned int speed);
+void hci_uart_set_flow_control(struct hci_uart *hu, bool enable);
+void hci_uart_set_speeds(struct hci_uart *hu, unsigned int init_speed,
+ unsigned int oper_speed);
#ifdef CONFIG_BT_HCIUART_H4
int h4_init(void);
diff --git a/drivers/bluetooth/hci_vhci.c b/drivers/bluetooth/hci_vhci.c
index 6653473f2757..78653db2ef2b 100644
--- a/drivers/bluetooth/hci_vhci.c
+++ b/drivers/bluetooth/hci_vhci.c
@@ -366,7 +366,7 @@ static const struct file_operations vhci_fops = {
.llseek = no_llseek,
};
-static struct miscdevice vhci_miscdev= {
+static struct miscdevice vhci_miscdev = {
.name = "vhci",
.fops = &vhci_fops,
.minor = VHCI_MINOR,
diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index 2f25a5ed8247..f7bd9f3ddaac 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -47,6 +47,8 @@ struct at86rf2xx_chip_data {
u16 t_reset_to_off;
u16 t_off_to_aack;
u16 t_off_to_tx_on;
+ u16 t_off_to_sleep;
+ u16 t_sleep_to_off;
u16 t_frame;
u16 t_p_ack;
int rssi_base_val;
@@ -88,6 +90,7 @@ struct at86rf230_local {
struct at86rf2xx_chip_data *data;
struct regmap *regmap;
int slp_tr;
+ bool sleep;
struct completion state_complete;
struct at86rf230_state_change state;
@@ -112,18 +115,66 @@ at86rf230_async_state_change(struct at86rf230_local *lp,
const u8 state, void (*complete)(void *context),
const bool irq_enable);
+static inline void
+at86rf230_sleep(struct at86rf230_local *lp)
+{
+ if (gpio_is_valid(lp->slp_tr)) {
+ gpio_set_value(lp->slp_tr, 1);
+ usleep_range(lp->data->t_off_to_sleep,
+ lp->data->t_off_to_sleep + 10);
+ lp->sleep = true;
+ }
+}
+
+static inline void
+at86rf230_awake(struct at86rf230_local *lp)
+{
+ if (gpio_is_valid(lp->slp_tr)) {
+ gpio_set_value(lp->slp_tr, 0);
+ usleep_range(lp->data->t_sleep_to_off,
+ lp->data->t_sleep_to_off + 100);
+ lp->sleep = false;
+ }
+}
+
static inline int
__at86rf230_write(struct at86rf230_local *lp,
unsigned int addr, unsigned int data)
{
- return regmap_write(lp->regmap, addr, data);
+ bool sleep = lp->sleep;
+ int ret;
+
+ /* awake for register setting if sleep */
+ if (sleep)
+ at86rf230_awake(lp);
+
+ ret = regmap_write(lp->regmap, addr, data);
+
+ /* sleep again if was sleeping */
+ if (sleep)
+ at86rf230_sleep(lp);
+
+ return ret;
}
static inline int
__at86rf230_read(struct at86rf230_local *lp,
unsigned int addr, unsigned int *data)
{
- return regmap_read(lp->regmap, addr, data);
+ bool sleep = lp->sleep;
+ int ret;
+
+ /* awake for register setting if sleep */
+ if (sleep)
+ at86rf230_awake(lp);
+
+ ret = regmap_read(lp->regmap, addr, data);
+
+ /* sleep again if was sleeping */
+ if (sleep)
+ at86rf230_sleep(lp);
+
+ return ret;
}
static inline int
@@ -145,7 +196,20 @@ at86rf230_write_subreg(struct at86rf230_local *lp,
unsigned int addr, unsigned int mask,
unsigned int shift, unsigned int data)
{
- return regmap_update_bits(lp->regmap, addr, mask, data << shift);
+ bool sleep = lp->sleep;
+ int ret;
+
+ /* awake for register setting if sleep */
+ if (sleep)
+ at86rf230_awake(lp);
+
+ ret = regmap_update_bits(lp->regmap, addr, mask, data << shift);
+
+ /* sleep again if was sleeping */
+ if (sleep)
+ at86rf230_sleep(lp);
+
+ return ret;
}
static inline void
@@ -869,13 +933,34 @@ at86rf230_ed(struct ieee802154_hw *hw, u8 *level)
static int
at86rf230_start(struct ieee802154_hw *hw)
{
- return at86rf230_sync_state_change(hw->priv, STATE_RX_AACK_ON);
+ struct at86rf230_local *lp = hw->priv;
+
+ at86rf230_awake(lp);
+ enable_irq(lp->spi->irq);
+
+ return at86rf230_sync_state_change(lp, STATE_RX_AACK_ON);
}
static void
at86rf230_stop(struct ieee802154_hw *hw)
{
- at86rf230_sync_state_change(hw->priv, STATE_FORCE_TRX_OFF);
+ struct at86rf230_local *lp = hw->priv;
+ u8 csma_seed[2];
+
+ at86rf230_sync_state_change(lp, STATE_FORCE_TRX_OFF);
+
+ disable_irq(lp->spi->irq);
+
+ /* It's recommended to set random new csma_seeds before sleep state.
+ * Makes only sense in the stop callback, not doing this inside of
+ * at86rf230_sleep, this is also used when we don't transmit afterwards
+ * when calling start callback again.
+ */
+ get_random_bytes(csma_seed, ARRAY_SIZE(csma_seed));
+ at86rf230_write_subreg(lp, SR_CSMA_SEED_0, csma_seed[0]);
+ at86rf230_write_subreg(lp, SR_CSMA_SEED_1, csma_seed[1]);
+
+ at86rf230_sleep(lp);
}
static int
@@ -1241,6 +1326,8 @@ static struct at86rf2xx_chip_data at86rf233_data = {
.t_reset_to_off = 26,
.t_off_to_aack = 80,
.t_off_to_tx_on = 80,
+ .t_off_to_sleep = 35,
+ .t_sleep_to_off = 210,
.t_frame = 4096,
.t_p_ack = 545,
.rssi_base_val = -91,
@@ -1254,6 +1341,8 @@ static struct at86rf2xx_chip_data at86rf231_data = {
.t_reset_to_off = 37,
.t_off_to_aack = 110,
.t_off_to_tx_on = 110,
+ .t_off_to_sleep = 35,
+ .t_sleep_to_off = 380,
.t_frame = 4096,
.t_p_ack = 545,
.rssi_base_val = -91,
@@ -1267,6 +1356,8 @@ static struct at86rf2xx_chip_data at86rf212_data = {
.t_reset_to_off = 26,
.t_off_to_aack = 200,
.t_off_to_tx_on = 200,
+ .t_off_to_sleep = 35,
+ .t_sleep_to_off = 380,
.t_frame = 4096,
.t_p_ack = 545,
.rssi_base_val = -100,
@@ -1443,7 +1534,7 @@ at86rf230_detect_device(struct at86rf230_local *lp)
return -EINVAL;
}
- lp->hw->flags = IEEE802154_HW_TX_OMIT_CKSUM | IEEE802154_HW_AACK |
+ lp->hw->flags = IEEE802154_HW_TX_OMIT_CKSUM |
IEEE802154_HW_CSMA_PARAMS |
IEEE802154_HW_FRAME_RETRIES | IEEE802154_HW_AFILT |
IEEE802154_HW_PROMISCUOUS;
@@ -1602,7 +1693,6 @@ static int at86rf230_probe(struct spi_device *spi)
lp->spi = spi;
lp->slp_tr = slp_tr;
hw->parent = &spi->dev;
- hw->vif_data_size = sizeof(*lp);
ieee802154_random_extended_addr(&hw->phy->perm_extended_addr);
lp->regmap = devm_regmap_init_spi(spi, &at86rf230_regmap_spi_config);
@@ -1634,13 +1724,19 @@ static int at86rf230_probe(struct spi_device *spi)
irq_type = irq_get_trigger_type(spi->irq);
if (!irq_type)
- irq_type = IRQF_TRIGGER_RISING;
+ irq_type = IRQF_TRIGGER_HIGH;
rc = devm_request_irq(&spi->dev, spi->irq, at86rf230_isr,
IRQF_SHARED | irq_type, dev_name(&spi->dev), lp);
if (rc)
goto free_dev;
+ /* disable_irq by default and wait for starting hardware */
+ disable_irq(spi->irq);
+
+ /* going into sleep by default */
+ at86rf230_sleep(lp);
+
rc = ieee802154_register_hw(lp->hw);
if (rc)
goto free_dev;
diff --git a/drivers/net/ieee802154/atusb.c b/drivers/net/ieee802154/atusb.c
index 5b6bb9adf9ae..80dfc725b8dc 100644
--- a/drivers/net/ieee802154/atusb.c
+++ b/drivers/net/ieee802154/atusb.c
@@ -58,17 +58,6 @@ struct atusb {
uint8_t tx_ack_seq; /* current TX ACK sequence number */
};
-/* at86rf230.h defines values as <reg, mask, shift> tuples. We use the more
- * traditional style of having registers and or-able values. SR_REG extracts
- * the register number. SR_VALUE uses the shift to prepare a value accordingly.
- */
-
-#define __SR_REG(reg, mask, shift) (reg)
-#define SR_REG(sr) __SR_REG(sr)
-
-#define __SR_VALUE(reg, mask, shift, val) ((val) << (shift))
-#define SR_VALUE(sr, val) __SR_VALUE(sr, (val))
-
/* ----- USB commands without data ----------------------------------------- */
/* To reduce the number of error checks in the code, we record the first error
@@ -130,6 +119,30 @@ static int atusb_read_reg(struct atusb *atusb, uint8_t reg)
return ret >= 0 ? value : ret;
}
+static int atusb_write_subreg(struct atusb *atusb, uint8_t reg, uint8_t mask,
+ uint8_t shift, uint8_t value)
+{
+ struct usb_device *usb_dev = atusb->usb_dev;
+ uint8_t orig, tmp;
+ int ret = 0;
+
+ dev_dbg(&usb_dev->dev, "atusb_write_subreg: 0x%02x <- 0x%02x\n",
+ reg, value);
+
+ orig = atusb_read_reg(atusb, reg);
+
+ /* Write the value only into that part of the register which is allowed
+ * by the mask. All other bits stay as before.
+ */
+ tmp = orig & ~mask;
+ tmp |= (value << shift) & mask;
+
+ if (tmp != orig)
+ ret = atusb_write_reg(atusb, reg, tmp);
+
+ return ret;
+}
+
static int atusb_get_and_clear_error(struct atusb *atusb)
{
int err = atusb->err;
@@ -376,7 +389,6 @@ static int atusb_set_hw_addr_filt(struct ieee802154_hw *hw,
{
struct atusb *atusb = hw->priv;
struct device *dev = &atusb->usb_dev->dev;
- uint8_t reg;
if (changed & IEEE802154_AFILT_SADDR_CHANGED) {
u16 addr = le16_to_cpu(filt->short_addr);
@@ -406,12 +418,10 @@ static int atusb_set_hw_addr_filt(struct ieee802154_hw *hw,
if (changed & IEEE802154_AFILT_PANC_CHANGED) {
dev_vdbg(dev,
"atusb_set_hw_addr_filt called for panc change\n");
- reg = atusb_read_reg(atusb, SR_REG(SR_AACK_I_AM_COORD));
if (filt->pan_coord)
- reg |= SR_VALUE(SR_AACK_I_AM_COORD, 1);
+ atusb_write_subreg(atusb, SR_AACK_I_AM_COORD, 1);
else
- reg &= ~SR_VALUE(SR_AACK_I_AM_COORD, 1);
- atusb_write_reg(atusb, SR_REG(SR_AACK_I_AM_COORD), reg);
+ atusb_write_subreg(atusb, SR_AACK_I_AM_COORD, 0);
}
return atusb_get_and_clear_error(atusb);
@@ -443,6 +453,53 @@ static void atusb_stop(struct ieee802154_hw *hw)
atusb_get_and_clear_error(atusb);
}
+#define ATUSB_MAX_TX_POWERS 0xF
+static const s32 atusb_powers[ATUSB_MAX_TX_POWERS + 1] = {
+ 300, 280, 230, 180, 130, 70, 0, -100, -200, -300, -400, -500, -700,
+ -900, -1200, -1700,
+};
+
+static int
+atusb_set_txpower(struct ieee802154_hw *hw, s32 mbm)
+{
+ struct atusb *atusb = hw->priv;
+ u32 i;
+
+ for (i = 0; i < hw->phy->supported.tx_powers_size; i++) {
+ if (hw->phy->supported.tx_powers[i] == mbm)
+ return atusb_write_subreg(atusb, SR_TX_PWR_23X, i);
+ }
+
+ return -EINVAL;
+}
+
+static int
+atusb_set_promiscuous_mode(struct ieee802154_hw *hw, const bool on)
+{
+ struct atusb *atusb = hw->priv;
+ int ret;
+
+ if (on) {
+ ret = atusb_write_subreg(atusb, SR_AACK_DIS_ACK, 1);
+ if (ret < 0)
+ return ret;
+
+ ret = atusb_write_subreg(atusb, SR_AACK_PROM_MODE, 1);
+ if (ret < 0)
+ return ret;
+ } else {
+ ret = atusb_write_subreg(atusb, SR_AACK_PROM_MODE, 0);
+ if (ret < 0)
+ return ret;
+
+ ret = atusb_write_subreg(atusb, SR_AACK_DIS_ACK, 0);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
static struct ieee802154_ops atusb_ops = {
.owner = THIS_MODULE,
.xmit_async = atusb_xmit,
@@ -451,6 +508,8 @@ static struct ieee802154_ops atusb_ops = {
.start = atusb_start,
.stop = atusb_stop,
.set_hw_addr_filt = atusb_set_hw_addr_filt,
+ .set_txpower = atusb_set_txpower,
+ .set_promiscuous_mode = atusb_set_promiscuous_mode,
};
/* ----- Firmware and chip version information ----------------------------- */
@@ -569,11 +628,16 @@ static int atusb_probe(struct usb_interface *interface,
hw->parent = &usb_dev->dev;
hw->flags = IEEE802154_HW_TX_OMIT_CKSUM | IEEE802154_HW_AFILT |
- IEEE802154_HW_AACK;
+ IEEE802154_HW_PROMISCUOUS;
+
+ hw->phy->flags = WPAN_PHY_FLAG_TXPOWER;
hw->phy->current_page = 0;
hw->phy->current_channel = 11; /* reset default */
hw->phy->supported.channels[0] = 0x7FFF800;
+ hw->phy->supported.tx_powers = atusb_powers;
+ hw->phy->supported.tx_powers_size = ARRAY_SIZE(atusb_powers);
+ hw->phy->transmit_power = hw->phy->supported.tx_powers[0];
ieee802154_random_extended_addr(&hw->phy->perm_extended_addr);
atusb_command(atusb, ATUSB_RF_RESET, 0);
@@ -622,8 +686,7 @@ static int atusb_probe(struct usb_interface *interface,
* http://www.jennic.com/download_file.php?supportFile=JN-AN-1035%20Calculating%20802-15-4%20Data%20Rates-1v0.pdf
*/
- atusb_write_reg(atusb,
- SR_REG(SR_RX_SAFE_MODE), SR_VALUE(SR_RX_SAFE_MODE, 1));
+ atusb_write_subreg(atusb, SR_RX_SAFE_MODE, 1);
#endif
atusb_write_reg(atusb, RG_IRQ_MASK, 0xff);
diff --git a/drivers/net/ieee802154/cc2520.c b/drivers/net/ieee802154/cc2520.c
index 84b28a05c5a1..b6fc29579667 100644
--- a/drivers/net/ieee802154/cc2520.c
+++ b/drivers/net/ieee802154/cc2520.c
@@ -196,6 +196,7 @@ struct cc2520_private {
u8 *buf; /* SPI TX/Rx data buffer */
struct mutex buffer_mutex; /* SPI buffer mutex */
bool is_tx; /* Flag for sync b/w Tx and Rx */
+ bool amplified; /* Flag for CC2591 */
int fifo_pin; /* FIFO GPIO pin number */
struct work_struct fifop_irqwork;/* Workqueue for FIFOP */
spinlock_t lock; /* Lock for is_tx*/
@@ -589,22 +590,23 @@ cc2520_filter(struct ieee802154_hw *hw,
struct ieee802154_hw_addr_filt *filt, unsigned long changed)
{
struct cc2520_private *priv = hw->priv;
+ int ret = 0;
if (changed & IEEE802154_AFILT_PANID_CHANGED) {
u16 panid = le16_to_cpu(filt->pan_id);
dev_vdbg(&priv->spi->dev,
"cc2520_filter called for pan id\n");
- cc2520_write_ram(priv, CC2520RAM_PANID,
- sizeof(panid), (u8 *)&panid);
+ ret = cc2520_write_ram(priv, CC2520RAM_PANID,
+ sizeof(panid), (u8 *)&panid);
}
if (changed & IEEE802154_AFILT_IEEEADDR_CHANGED) {
dev_vdbg(&priv->spi->dev,
"cc2520_filter called for IEEE addr\n");
- cc2520_write_ram(priv, CC2520RAM_IEEEADDR,
- sizeof(filt->ieee_addr),
- (u8 *)&filt->ieee_addr);
+ ret = cc2520_write_ram(priv, CC2520RAM_IEEEADDR,
+ sizeof(filt->ieee_addr),
+ (u8 *)&filt->ieee_addr);
}
if (changed & IEEE802154_AFILT_SADDR_CHANGED) {
@@ -612,20 +614,113 @@ cc2520_filter(struct ieee802154_hw *hw,
dev_vdbg(&priv->spi->dev,
"cc2520_filter called for saddr\n");
- cc2520_write_ram(priv, CC2520RAM_SHORTADDR,
- sizeof(addr), (u8 *)&addr);
+ ret = cc2520_write_ram(priv, CC2520RAM_SHORTADDR,
+ sizeof(addr), (u8 *)&addr);
}
if (changed & IEEE802154_AFILT_PANC_CHANGED) {
dev_vdbg(&priv->spi->dev,
"cc2520_filter called for panc change\n");
if (filt->pan_coord)
- cc2520_write_register(priv, CC2520_FRMFILT0, 0x02);
+ ret = cc2520_write_register(priv, CC2520_FRMFILT0,
+ 0x02);
else
- cc2520_write_register(priv, CC2520_FRMFILT0, 0x00);
+ ret = cc2520_write_register(priv, CC2520_FRMFILT0,
+ 0x00);
}
- return 0;
+ return ret;
+}
+
+static inline int cc2520_set_tx_power(struct cc2520_private *priv, s32 mbm)
+{
+ u8 power;
+
+ switch (mbm) {
+ case 500:
+ power = 0xF7;
+ break;
+ case 300:
+ power = 0xF2;
+ break;
+ case 200:
+ power = 0xAB;
+ break;
+ case 100:
+ power = 0x13;
+ break;
+ case 0:
+ power = 0x32;
+ break;
+ case -200:
+ power = 0x81;
+ break;
+ case -400:
+ power = 0x88;
+ break;
+ case -700:
+ power = 0x2C;
+ break;
+ case -1800:
+ power = 0x03;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return cc2520_write_register(priv, CC2520_TXPOWER, power);
+}
+
+static inline int cc2520_cc2591_set_tx_power(struct cc2520_private *priv,
+ s32 mbm)
+{
+ u8 power;
+
+ switch (mbm) {
+ case 1700:
+ power = 0xF9;
+ break;
+ case 1600:
+ power = 0xF0;
+ break;
+ case 1400:
+ power = 0xA0;
+ break;
+ case 1100:
+ power = 0x2C;
+ break;
+ case -100:
+ power = 0x03;
+ break;
+ case -800:
+ power = 0x01;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return cc2520_write_register(priv, CC2520_TXPOWER, power);
+}
+
+#define CC2520_MAX_TX_POWERS 0x8
+static const s32 cc2520_powers[CC2520_MAX_TX_POWERS + 1] = {
+ 500, 300, 200, 100, 0, -200, -400, -700, -1800,
+};
+
+#define CC2520_CC2591_MAX_TX_POWERS 0x5
+static const s32 cc2520_cc2591_powers[CC2520_CC2591_MAX_TX_POWERS + 1] = {
+ 1700, 1600, 1400, 1100, -100, -800,
+};
+
+static int
+cc2520_set_txpower(struct ieee802154_hw *hw, s32 mbm)
+{
+ struct cc2520_private *priv = hw->priv;
+
+ if (!priv->amplified)
+ return cc2520_set_tx_power(priv, mbm);
+
+ return cc2520_cc2591_set_tx_power(priv, mbm);
}
static const struct ieee802154_ops cc2520_ops = {
@@ -636,6 +731,7 @@ static const struct ieee802154_ops cc2520_ops = {
.ed = cc2520_ed,
.set_channel = cc2520_set_channel,
.set_hw_addr_filt = cc2520_filter,
+ .set_txpower = cc2520_set_txpower,
};
static int cc2520_register(struct cc2520_private *priv)
@@ -649,13 +745,25 @@ static int cc2520_register(struct cc2520_private *priv)
priv->hw->priv = priv;
priv->hw->parent = &priv->spi->dev;
priv->hw->extra_tx_headroom = 0;
- priv->hw->vif_data_size = sizeof(*priv);
ieee802154_random_extended_addr(&priv->hw->phy->perm_extended_addr);
/* We do support only 2.4 Ghz */
priv->hw->phy->supported.channels[0] = 0x7FFF800;
- priv->hw->flags = IEEE802154_HW_OMIT_CKSUM | IEEE802154_HW_AACK |
- IEEE802154_HW_AFILT;
+ priv->hw->flags = IEEE802154_HW_OMIT_CKSUM | IEEE802154_HW_AFILT;
+
+ priv->hw->phy->flags = WPAN_PHY_FLAG_TXPOWER;
+
+ if (!priv->amplified) {
+ priv->hw->phy->supported.tx_powers = cc2520_powers;
+ priv->hw->phy->supported.tx_powers_size = ARRAY_SIZE(cc2520_powers);
+ priv->hw->phy->transmit_power = priv->hw->phy->supported.tx_powers[4];
+ } else {
+ priv->hw->phy->supported.tx_powers = cc2520_cc2591_powers;
+ priv->hw->phy->supported.tx_powers_size = ARRAY_SIZE(cc2520_cc2591_powers);
+ priv->hw->phy->transmit_power = priv->hw->phy->supported.tx_powers[0];
+ }
+
+ priv->hw->phy->current_channel = 11;
dev_vdbg(&priv->spi->dev, "registered cc2520\n");
ret = ieee802154_register_hw(priv->hw);
@@ -738,7 +846,9 @@ static int cc2520_get_platform_data(struct spi_device *spi,
pdata->vreg = of_get_named_gpio(np, "vreg-gpio", 0);
pdata->reset = of_get_named_gpio(np, "reset-gpio", 0);
- pdata->amplified = of_property_read_bool(np, "amplified");
+ /* CC2591 front end for CC2520 */
+ if (of_property_read_bool(np, "amplified"))
+ priv->amplified = true;
return 0;
}
@@ -781,11 +891,7 @@ static int cc2520_hw_init(struct cc2520_private *priv)
* amplifier. See section 8 page 17 of TI application note AN065.
* http://www.ti.com/lit/an/swra229a/swra229a.pdf
*/
- if (pdata.amplified) {
- ret = cc2520_write_register(priv, CC2520_TXPOWER, 0xF9);
- if (ret)
- goto err_ret;
-
+ if (priv->amplified) {
ret = cc2520_write_register(priv, CC2520_AGCCTRL1, 0x16);
if (ret)
goto err_ret;
@@ -806,10 +912,6 @@ static int cc2520_hw_init(struct cc2520_private *priv)
if (ret)
goto err_ret;
} else {
- ret = cc2520_write_register(priv, CC2520_TXPOWER, 0xF7);
- if (ret)
- goto err_ret;
-
ret = cc2520_write_register(priv, CC2520_AGCCTRL1, 0x11);
if (ret)
goto err_ret;
@@ -904,6 +1006,9 @@ static int cc2520_probe(struct spi_device *spi)
spin_lock_init(&priv->lock);
init_completion(&priv->tx_complete);
+ /* Assumption that CC2591 is not connected */
+ priv->amplified = false;
+
/* Request all the gpio's */
if (!gpio_is_valid(pdata.fifo)) {
dev_err(&spi->dev, "fifo gpio is not valid\n");
diff --git a/drivers/net/ieee802154/fakelb.c b/drivers/net/ieee802154/fakelb.c
index 9d0da4ec3e8c..860d4aed8274 100644
--- a/drivers/net/ieee802154/fakelb.c
+++ b/drivers/net/ieee802154/fakelb.c
@@ -41,6 +41,8 @@ struct fakelb_phy {
u8 page;
u8 channel;
+ bool suspended;
+
struct list_head list;
struct list_head list_ifup;
};
@@ -69,6 +71,7 @@ static int fakelb_hw_xmit(struct ieee802154_hw *hw, struct sk_buff *skb)
struct fakelb_phy *current_phy = hw->priv, *phy;
read_lock_bh(&fakelb_ifup_phys_lock);
+ WARN_ON(current_phy->suspended);
list_for_each_entry(phy, &fakelb_ifup_phys, list_ifup) {
if (current_phy == phy)
continue;
@@ -92,6 +95,7 @@ static int fakelb_hw_start(struct ieee802154_hw *hw)
struct fakelb_phy *phy = hw->priv;
write_lock_bh(&fakelb_ifup_phys_lock);
+ phy->suspended = false;
list_add(&phy->list_ifup, &fakelb_ifup_phys);
write_unlock_bh(&fakelb_ifup_phys_lock);
@@ -103,6 +107,7 @@ static void fakelb_hw_stop(struct ieee802154_hw *hw)
struct fakelb_phy *phy = hw->priv;
write_lock_bh(&fakelb_ifup_phys_lock);
+ phy->suspended = true;
list_del(&phy->list_ifup);
write_unlock_bh(&fakelb_ifup_phys_lock);
}
diff --git a/drivers/net/ieee802154/mrf24j40.c b/drivers/net/ieee802154/mrf24j40.c
index f2a1bd122a74..2549760e039f 100644
--- a/drivers/net/ieee802154/mrf24j40.c
+++ b/drivers/net/ieee802154/mrf24j40.c
@@ -533,6 +533,7 @@ static int mrf24j40_handle_rx(struct mrf24j40 *devrec)
u8 lqi = 0;
u8 val;
int ret = 0;
+ int ret2;
struct sk_buff *skb;
/* Turn off reception of packets off the air. This prevents the
@@ -569,9 +570,9 @@ static int mrf24j40_handle_rx(struct mrf24j40 *devrec)
out:
/* Turn back on reception of packets off the air. */
- ret = read_short_reg(devrec, REG_BBREG1, &val);
- if (ret)
- return ret;
+ ret2 = read_short_reg(devrec, REG_BBREG1, &val);
+ if (ret2)
+ return ret2;
val &= ~0x4; /* Clear RXDECINV */
write_short_reg(devrec, REG_BBREG1, val);
@@ -751,8 +752,7 @@ static int mrf24j40_probe(struct spi_device *spi)
devrec->hw->priv = devrec;
devrec->hw->parent = &devrec->spi->dev;
devrec->hw->phy->supported.channels[0] = CHANNEL_MASK;
- devrec->hw->flags = IEEE802154_HW_OMIT_CKSUM | IEEE802154_HW_AACK |
- IEEE802154_HW_AFILT;
+ devrec->hw->flags = IEEE802154_HW_OMIT_CKSUM | IEEE802154_HW_AFILT;
dev_dbg(printdev(devrec), "registered mrf24j40\n");
ret = ieee802154_register_hw(devrec->hw);
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-20 20:18:09 +0000