summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/hwmon/max1606462
-rw-r--r--Documentation/hwmon/max3444079
-rw-r--r--Documentation/hwmon/max868869
-rw-r--r--Documentation/hwmon/pmbus34
-rw-r--r--Documentation/hwmon/smm6658
-rw-r--r--Documentation/hwmon/submitting-patches109
6 files changed, 331 insertions, 30 deletions
diff --git a/Documentation/hwmon/max16064 b/Documentation/hwmon/max16064
new file mode 100644
index 000000000000..41728999e142
--- /dev/null
+++ b/Documentation/hwmon/max16064
@@ -0,0 +1,62 @@
+Kernel driver max16064
+======================
+
+Supported chips:
+ * Maxim MAX16064
+ Prefix: 'max16064'
+ Addresses scanned: -
+ Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX16064.pdf
+
+Author: Guenter Roeck <guenter.roeck@ericsson.com>
+
+
+Description
+-----------
+
+This driver supports hardware montoring for Maxim MAX16064 Quad Power-Supply
+Controller with Active-Voltage Output Control and PMBus Interface.
+
+The driver is a client driver to the core PMBus driver.
+Please see Documentation/hwmon/pmbus for details on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices for
+details.
+
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported. Limits are read-write; all other
+attributes are read-only.
+
+in[1-4]_label "vout[1-4]"
+in[1-4]_input Measured voltage. From READ_VOUT register.
+in[1-4]_min Minumum Voltage. From VOUT_UV_WARN_LIMIT register.
+in[1-4]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register.
+in[1-4]_lcrit Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register.
+in[1-4]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
+in[1-4]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status.
+in[1-4]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status.
+in[1-4]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT status.
+in[1-4]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT status.
+
+temp1_input Measured temperature. From READ_TEMPERATURE_1 register.
+temp1_max Maximum temperature. From OT_WARN_LIMIT register.
+temp1_crit Critical high temperature. From OT_FAULT_LIMIT register.
+temp1_max_alarm Chip temperature high alarm. Set by comparing
+ READ_TEMPERATURE_1 with OT_WARN_LIMIT if TEMP_OT_WARNING
+ status is set.
+temp1_crit_alarm Chip temperature critical high alarm. Set by comparing
+ READ_TEMPERATURE_1 with OT_FAULT_LIMIT if TEMP_OT_FAULT
+ status is set.
diff --git a/Documentation/hwmon/max34440 b/Documentation/hwmon/max34440
new file mode 100644
index 000000000000..6c525dd07d59
--- /dev/null
+++ b/Documentation/hwmon/max34440
@@ -0,0 +1,79 @@
+Kernel driver max34440
+======================
+
+Supported chips:
+ * Maxim MAX34440
+ Prefixes: 'max34440'
+ Addresses scanned: -
+ Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX34440.pdf
+ * Maxim MAX34441
+ PMBus 5-Channel Power-Supply Manager and Intelligent Fan Controller
+ Prefixes: 'max34441'
+ Addresses scanned: -
+ Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX34441.pdf
+
+Author: Guenter Roeck <guenter.roeck@ericsson.com>
+
+
+Description
+-----------
+
+This driver supports hardware montoring for Maxim MAX34440 PMBus 6-Channel
+Power-Supply Manager and MAX34441 PMBus 5-Channel Power-Supply Manager
+and Intelligent Fan Controller.
+
+The driver is a client driver to the core PMBus driver. Please see
+Documentation/hwmon/pmbus for details on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices for
+details.
+
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported. Limits are read-write; all other
+attributes are read-only.
+
+in[1-6]_label "vout[1-6]".
+in[1-6]_input Measured voltage. From READ_VOUT register.
+in[1-6]_min Minumum Voltage. From VOUT_UV_WARN_LIMIT register.
+in[1-6]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register.
+in[1-6]_lcrit Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register.
+in[1-6]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
+in[1-6]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status.
+in[1-6]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status.
+in[1-6]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT status.
+in[1-6]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT status.
+
+curr[1-6]_label "iout[1-6]".
+curr[1-6]_input Measured current. From READ_IOUT register.
+curr[1-6]_max Maximum current. From IOUT_OC_WARN_LIMIT register.
+curr[1-6]_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register.
+curr[1-6]_max_alarm Current high alarm. From IOUT_OC_WARNING status.
+curr[1-6]_crit_alarm Current critical high alarm. From IOUT_OC_FAULT status.
+
+ in6 and curr6 attributes only exist for MAX34440.
+
+temp[1-8]_input Measured temperatures. From READ_TEMPERATURE_1 register.
+ temp1 is the chip's internal temperature. temp2..temp5
+ are remote I2C temperature sensors. For MAX34441, temp6
+ is a remote thermal-diode sensor. For MAX34440, temp6..8
+ are remote I2C temperature sensors.
+temp[1-8]_max Maximum temperature. From OT_WARN_LIMIT register.
+temp[1-8]_crit Critical high temperature. From OT_FAULT_LIMIT register.
+temp[1-8]_max_alarm Temperature high alarm.
+temp[1-8]_crit_alarm Temperature critical high alarm.
+
+ temp7 and temp8 attributes only exist for MAX34440.
diff --git a/Documentation/hwmon/max8688 b/Documentation/hwmon/max8688
new file mode 100644
index 000000000000..0ddd3a412030
--- /dev/null
+++ b/Documentation/hwmon/max8688
@@ -0,0 +1,69 @@
+Kernel driver max8688
+=====================
+
+Supported chips:
+ * Maxim MAX8688
+ Prefix: 'max8688'
+ Addresses scanned: -
+ Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX8688.pdf
+
+Author: Guenter Roeck <guenter.roeck@ericsson.com>
+
+
+Description
+-----------
+
+This driver supports hardware montoring for Maxim MAX8688 Digital Power-Supply
+Controller/Monitor with PMBus Interface.
+
+The driver is a client driver to the core PMBus driver. Please see
+Documentation/hwmon/pmbus for details on PMBus client drivers.
+
+
+Usage Notes
+-----------
+
+This driver does not auto-detect devices. You will have to instantiate the
+devices explicitly. Please see Documentation/i2c/instantiating-devices for
+details.
+
+
+Platform data support
+---------------------
+
+The driver supports standard PMBus driver platform data.
+
+
+Sysfs entries
+-------------
+
+The following attributes are supported. Limits are read-write; all other
+attributes are read-only.
+
+in1_label "vout1"
+in1_input Measured voltage. From READ_VOUT register.
+in1_min Minumum Voltage. From VOUT_UV_WARN_LIMIT register.
+in1_max Maximum voltage. From VOUT_OV_WARN_LIMIT register.
+in1_lcrit Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register.
+in1_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
+in1_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status.
+in1_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status.
+in1_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT status.
+in1_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT status.
+
+curr1_label "iout1"
+curr1_input Measured current. From READ_IOUT register.
+curr1_max Maximum current. From IOUT_OC_WARN_LIMIT register.
+curr1_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register.
+curr1_max_alarm Current high alarm. From IOUT_OC_WARN_LIMIT register.
+curr1_crit_alarm Current critical high alarm. From IOUT_OC_FAULT status.
+
+temp1_input Measured temperature. From READ_TEMPERATURE_1 register.
+temp1_max Maximum temperature. From OT_WARN_LIMIT register.
+temp1_crit Critical high temperature. From OT_FAULT_LIMIT register.
+temp1_max_alarm Chip temperature high alarm. Set by comparing
+ READ_TEMPERATURE_1 with OT_WARN_LIMIT if TEMP_OT_WARNING
+ status is set.
+temp1_crit_alarm Chip temperature critical high alarm. Set by comparing
+ READ_TEMPERATURE_1 with OT_FAULT_LIMIT if TEMP_OT_FAULT
+ status is set.
diff --git a/Documentation/hwmon/pmbus b/Documentation/hwmon/pmbus
index dc4933e96344..5e462fc7f99b 100644
--- a/Documentation/hwmon/pmbus
+++ b/Documentation/hwmon/pmbus
@@ -13,26 +13,6 @@ Supported chips:
Prefix: 'ltc2978'
Addresses scanned: -
Datasheet: http://cds.linear.com/docs/Datasheet/2978fa.pdf
- * Maxim MAX16064
- Quad Power-Supply Controller
- Prefix: 'max16064'
- Addresses scanned: -
- Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX16064.pdf
- * Maxim MAX34440
- PMBus 6-Channel Power-Supply Manager
- Prefixes: 'max34440'
- Addresses scanned: -
- Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX34440.pdf
- * Maxim MAX34441
- PMBus 5-Channel Power-Supply Manager and Intelligent Fan Controller
- Prefixes: 'max34441'
- Addresses scanned: -
- Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX34441.pdf
- * Maxim MAX8688
- Digital Power-Supply Controller/Monitor
- Prefix: 'max8688'
- Addresses scanned: -
- Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX8688.pdf
* Generic PMBus devices
Prefix: 'pmbus'
Addresses scanned: -
@@ -175,11 +155,13 @@ currX_crit Critical maximum current.
From IIN_OC_FAULT_LIMIT or IOUT_OC_FAULT_LIMIT register.
currX_alarm Current high alarm.
From IIN_OC_WARNING or IOUT_OC_WARNING status.
+currX_max_alarm Current high alarm.
+ From IIN_OC_WARN_LIMIT or IOUT_OC_WARN_LIMIT status.
currX_lcrit_alarm Output current critical low alarm.
From IOUT_UC_FAULT status.
currX_crit_alarm Current critical high alarm.
From IIN_OC_FAULT or IOUT_OC_FAULT status.
-currX_label "iin" or "vinY"
+currX_label "iin" or "ioutY"
powerX_input Measured power. From READ_PIN or READ_POUT register.
powerX_cap Output power cap. From POUT_MAX register.
@@ -193,13 +175,13 @@ powerX_crit_alarm Output power critical high alarm.
From POUT_OP_FAULT status.
powerX_label "pin" or "poutY"
-tempX_input Measured tempererature.
+tempX_input Measured temperature.
From READ_TEMPERATURE_X register.
-tempX_min Mimimum tempererature. From UT_WARN_LIMIT register.
-tempX_max Maximum tempererature. From OT_WARN_LIMIT register.
-tempX_lcrit Critical low tempererature.
+tempX_min Mimimum temperature. From UT_WARN_LIMIT register.
+tempX_max Maximum temperature. From OT_WARN_LIMIT register.
+tempX_lcrit Critical low temperature.
From UT_FAULT_LIMIT register.
-tempX_crit Critical high tempererature.
+tempX_crit Critical high temperature.
From OT_FAULT_LIMIT register.
tempX_min_alarm Chip temperature low alarm. Set by comparing
READ_TEMPERATURE_X with UT_WARN_LIMIT if
diff --git a/Documentation/hwmon/smm665 b/Documentation/hwmon/smm665
index 3820fc9ca52d..59e316140542 100644
--- a/Documentation/hwmon/smm665
+++ b/Documentation/hwmon/smm665
@@ -150,8 +150,8 @@ in8_crit_alarm Channel F critical alarm
in9_crit_alarm AIN1 critical alarm
in10_crit_alarm AIN2 critical alarm
-temp1_input Chip tempererature
-temp1_min Mimimum chip tempererature
-temp1_max Maximum chip tempererature
-temp1_crit Critical chip tempererature
+temp1_input Chip temperature
+temp1_min Mimimum chip temperature
+temp1_max Maximum chip temperature
+temp1_crit Critical chip temperature
temp1_crit_alarm Temperature critical alarm
diff --git a/Documentation/hwmon/submitting-patches b/Documentation/hwmon/submitting-patches
new file mode 100644
index 000000000000..86f42e8e9e49
--- /dev/null
+++ b/Documentation/hwmon/submitting-patches
@@ -0,0 +1,109 @@
+ How to Get Your Patch Accepted Into the Hwmon Subsystem
+ -------------------------------------------------------
+
+This text is is a collection of suggestions for people writing patches or
+drivers for the hwmon subsystem. Following these suggestions will greatly
+increase the chances of your change being accepted.
+
+
+1. General
+----------
+
+* It should be unnecessary to mention, but please read and follow
+ Documentation/SubmitChecklist
+ Documentation/SubmittingDrivers
+ Documentation/SubmittingPatches
+ Documentation/CodingStyle
+
+* If your patch generates checkpatch warnings, please refrain from explanations
+ such as "I don't like that coding style". Keep in mind that each unnecessary
+ warning helps hiding a real problem. If you don't like the kernel coding
+ style, don't write kernel drivers.
+
+* Please test your patch thoroughly. We are not your test group.
+ Sometimes a patch can not or not completely be tested because of missing
+ hardware. In such cases, you should test-build the code on at least one
+ architecture. If run-time testing was not achieved, it should be written
+ explicitly below the patch header.
+
+* If your patch (or the driver) is affected by configuration options such as
+ CONFIG_SMP or CONFIG_HOTPLUG, make sure it compiles for all configuration
+ variants.
+
+
+2. Adding functionality to existing drivers
+-------------------------------------------
+
+* Make sure the documentation in Documentation/hwmon/<driver_name> is up to
+ date.
+
+* Make sure the information in Kconfig is up to date.
+
+* If the added functionality requires some cleanup or structural changes, split
+ your patch into a cleanup part and the actual addition. This makes it easier
+ to review your changes, and to bisect any resulting problems.
+
+* Never mix bug fixes, cleanup, and functional enhancements in a single patch.
+
+
+3. New drivers
+--------------
+
+* Running your patch or driver file(s) through checkpatch does not mean its
+ formatting is clean. If unsure about formatting in your new driver, run it
+ through Lindent. Lindent is not perfect, and you may have to do some minor
+ cleanup, but it is a good start.
+
+* Consider adding yourself to MAINTAINERS.
+
+* Document the driver in Documentation/hwmon/<driver_name>.
+
+* Add the driver to Kconfig and Makefile in alphabetical order.
+
+* Make sure that all dependencies are listed in Kconfig. For new drivers, it
+ is most likely prudent to add a dependency on EXPERIMENTAL.
+
+* Avoid forward declarations if you can. Rearrange the code if necessary.
+
+* Avoid calculations in macros and macro-generated functions. While such macros
+ may save a line or so in the source, it obfuscates the code and makes code
+ review more difficult. It may also result in code which is more complicated
+ than necessary. Use inline functions or just regular functions instead.
+
+* If the driver has a detect function, make sure it is silent. Debug messages
+ and messages printed after a successful detection are acceptable, but it
+ must not print messages such as "Chip XXX not found/supported".
+
+ Keep in mind that the detect function will run for all drivers supporting an
+ address if a chip is detected on that address. Unnecessary messages will just
+ pollute the kernel log and not provide any value.
+
+* Provide a detect function if and only if a chip can be detected reliably.
+
+* Avoid writing to chip registers in the detect function. If you have to write,
+ only do it after you have already gathered enough data to be certain that the
+ detection is going to be successful.
+
+ Keep in mind that the chip might not be what your driver believes it is, and
+ writing to it might cause a bad misconfiguration.
+
+* Make sure there are no race conditions in the probe function. Specifically,
+ completely initialize your chip first, then create sysfs entries and register
+ with the hwmon subsystem.
+
+* Do not provide support for deprecated sysfs attributes.
+
+* Do not create non-standard attributes unless really needed. If you have to use
+ non-standard attributes, or you believe you do, discuss it on the mailing list
+ first. Either case, provide a detailed explanation why you need the
+ non-standard attribute(s).
+ Standard attributes are specified in Documentation/hwmon/sysfs-interface.
+
+* When deciding which sysfs attributes to support, look at the chip's
+ capabilities. While we do not expect your driver to support everything the
+ chip may offer, it should at least support all limits and alarms.
+
+* Last but not least, please check if a driver for your chip already exists
+ before starting to write a new driver. Especially for temperature sensors,
+ new chips are often variants of previously released chips. In some cases,
+ a presumably new chip may simply have been relabeled.