diff options
Diffstat (limited to 'Documentation/ABI/testing/sysfs-bus-usb')
| -rw-r--r-- | Documentation/ABI/testing/sysfs-bus-usb | 19 |
1 files changed, 18 insertions, 1 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb index 08d456e07b53..559baa5c418c 100644 --- a/Documentation/ABI/testing/sysfs-bus-usb +++ b/Documentation/ABI/testing/sysfs-bus-usb @@ -189,6 +189,16 @@ Description: The file will read "hotplug", "wired" and "not used" if the information is available, and "unknown" otherwise. +What: /sys/bus/usb/devices/.../(hub interface)/portX/location +Date: October 2018 +Contact: Bjørn Mork <bjorn@mork.no> +Description: + Some platforms provide usb port physical location through + firmware. This is used by the kernel to pair up logical ports + mapping to the same physical connector. The attribute exposes the + raw location value as a hex integer. + + What: /sys/bus/usb/devices/.../(hub interface)/portX/quirks Date: May 2018 Contact: Nicolas Boichat <drinkcat@chromium.org> @@ -219,7 +229,14 @@ Description: ports and report them to the kernel. This attribute is to expose the number of over-current situation occurred on a specific port to user space. This file will contain an unsigned 32 bit value - which wraps to 0 after its maximum is reached. + which wraps to 0 after its maximum is reached. This file supports + poll() for monitoring changes to this value in user space. + + Any time this value changes the corresponding hub device will send a + udev event with the following attributes: + + OVER_CURRENT_PORT=/sys/bus/usb/devices/.../(hub interface)/portX + OVER_CURRENT_COUNT=[current value of this sysfs attribute] What: /sys/bus/usb/devices/.../(hub interface)/portX/usb3_lpm_permit Date: November 2015 |