diff options
37 files changed, 397 insertions, 254 deletions
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index 103189095c80..3bb5d241dd40 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -1875,6 +1875,7 @@ uart_set_options(struct uart_port *port, struct console *co, int baud, int parity, int bits, int flow) { struct ktermios termios; + static struct ktermios dummy; int i; /* @@ -1920,7 +1921,7 @@ uart_set_options(struct uart_port *port, struct console *co, */ port->mctrl |= TIOCM_DTR; - port->ops->set_termios(port, &termios, NULL); + port->ops->set_termios(port, &termios, &dummy); co->cflag = termios.c_cflag; return 0; diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 8bdaa157ffe7..eb4ac47612a5 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1641,7 +1641,13 @@ free_interfaces: intf->dev.bus_id, ret); continue; } - usb_create_sysfs_intf_files (intf); + + /* The driver's probe method can call usb_set_interface(), + * which would mean the interface's sysfs files are already + * created. Just in case, we'll remove them first. + */ + usb_remove_sysfs_intf_files(intf); + usb_create_sysfs_intf_files(intf); } usb_autosuspend_device(dev); diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index c20c03aaf012..d05ead20081c 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -372,7 +372,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags) /* enforce simple/standard policy */ allowed = (URB_NO_TRANSFER_DMA_MAP | URB_NO_SETUP_DMA_MAP | - URB_NO_INTERRUPT | URB_DIR_MASK); + URB_NO_INTERRUPT | URB_DIR_MASK | URB_FREE_BUFFER); switch (xfertype) { case USB_ENDPOINT_XFER_BULK: if (is_out) diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c index 1c8040602525..c72e9620bf8d 100644 --- a/drivers/usb/gadget/amd5536udc.c +++ b/drivers/usb/gadget/amd5536udc.c @@ -3289,7 +3289,7 @@ static int udc_pci_probe( dev->chiprev = pdev->revision; pci_set_master(pdev); - pci_set_mwi(pdev); + pci_try_set_mwi(pdev); /* init dma pools */ if (use_dma) { diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index c978d622fa8a..177e78ed241b 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -156,7 +156,7 @@ config USB_OHCI_HCD_PCI config USB_OHCI_HCD_SSB bool "OHCI support for Broadcom SSB OHCI core" - depends on USB_OHCI_HCD && SSB && EXPERIMENTAL + depends on USB_OHCI_HCD && (SSB = y || SSB = CONFIG_USB_OHCI_HCD) && EXPERIMENTAL default n ---help--- Support for the Sonics Silicon Backplane (SSB) attached diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 240c7f507541..704f33fdd2f1 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -80,7 +80,10 @@ static const char hcd_name [] = "ohci_hcd"; static void ohci_dump (struct ohci_hcd *ohci, int verbose); static int ohci_init (struct ohci_hcd *ohci); static void ohci_stop (struct usb_hcd *hcd); + +#if defined(CONFIG_PM) || defined(CONFIG_PCI) static int ohci_restart (struct ohci_hcd *ohci); +#endif #include "ohci-hub.c" #include "ohci-dbg.c" @@ -396,7 +399,7 @@ static int check_ed(struct ohci_hcd *ohci, struct ed *ed) */ static void unlink_watchdog_func(unsigned long _ohci) { - long flags; + unsigned long flags; unsigned max; unsigned seen_count = 0; unsigned i; @@ -893,6 +896,8 @@ static void ohci_stop (struct usb_hcd *hcd) /*-------------------------------------------------------------------------*/ +#if defined(CONFIG_PM) || defined(CONFIG_PCI) + /* must not be called from interrupt context */ static int ohci_restart (struct ohci_hcd *ohci) { @@ -954,6 +959,8 @@ static int ohci_restart (struct ohci_hcd *ohci) return 0; } +#endif + /*-------------------------------------------------------------------------*/ #define DRIVER_INFO DRIVER_VERSION " " DRIVER_DESC diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c index e5d60d5b105a..60379b17bbc1 100644 --- a/drivers/usb/host/uhci-q.c +++ b/drivers/usb/host/uhci-q.c @@ -1271,7 +1271,8 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb, } else if (qh->period != urb->interval) { return -EINVAL; /* Can't change the period */ - } else { /* Pick up where the last URB leaves off */ + } else { + /* Find the next unused frame */ if (list_empty(&qh->queue)) { frame = qh->iso_frame; } else { @@ -1283,10 +1284,18 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb, lurb->number_of_packets * lurb->interval; } - if (urb->transfer_flags & URB_ISO_ASAP) - urb->start_frame = frame; - else if (urb->start_frame != frame) - return -EINVAL; + if (urb->transfer_flags & URB_ISO_ASAP) { + /* Skip some frames if necessary to insure + * the start frame is in the future. + */ + uhci_get_current_frame_number(uhci); + if (uhci_frame_before_eq(frame, uhci->frame_number)) { + frame = uhci->frame_number + 1; + frame += ((qh->phase - frame) & + (qh->period - 1)); + } + } /* Otherwise pick up where the last URB leaves off */ + urb->start_frame = frame; } /* Make sure we won't have to go too far into the future */ diff --git a/drivers/usb/misc/cytherm.c b/drivers/usb/misc/cytherm.c index 2677fea147d9..1cd9e7eba93b 100644 --- a/drivers/usb/misc/cytherm.c +++ b/drivers/usb/misc/cytherm.c @@ -399,7 +399,6 @@ static void cytherm_disconnect(struct usb_interface *interface) struct usb_cytherm *dev; dev = usb_get_intfdata (interface); - usb_set_intfdata (interface, NULL); device_remove_file(&interface->dev, &dev_attr_brightness); device_remove_file(&interface->dev, &dev_attr_temp); @@ -407,6 +406,9 @@ static void cytherm_disconnect(struct usb_interface *interface) device_remove_file(&interface->dev, &dev_attr_port0); device_remove_file(&interface->dev, &dev_attr_port1); + /* first remove the files, then NULL the pointer */ + usb_set_intfdata (interface, NULL); + usb_put_dev(dev->udev); kfree(dev); diff --git a/drivers/usb/misc/emi26.c b/drivers/usb/misc/emi26.c index cd137577bb2d..4a09b87bdd28 100644 --- a/drivers/usb/misc/emi26.c +++ b/drivers/usb/misc/emi26.c @@ -114,6 +114,10 @@ static int emi26_load_firmware (struct usb_device *dev) /* De-assert reset (let the CPU run) */ err = emi26_set_reset(dev,0); + if (err < 0) { + err("%s - error loading firmware: error = %d", __FUNCTION__, err); + goto wraperr; + } msleep(250); /* let device settle */ /* 2. We upload the FPGA firmware into the EMI diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c index 4758cc5ccebc..d1362415922c 100644 --- a/drivers/usb/misc/emi62.c +++ b/drivers/usb/misc/emi62.c @@ -123,6 +123,10 @@ static int emi62_load_firmware (struct usb_device *dev) /* De-assert reset (let the CPU run) */ err = emi62_set_reset(dev,0); + if (err < 0) { + err("%s - error loading firmware: error = %d", __FUNCTION__, err); + goto wraperr; + } msleep(250); /* let device settle */ /* 2. We upload the FPGA firmware into the EMI diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c index d3d8cd6ff103..148b7fe639b2 100644 --- a/drivers/usb/misc/ftdi-elan.c +++ b/drivers/usb/misc/ftdi-elan.c @@ -147,7 +147,7 @@ struct u132_target { /* Structure to hold all of our device specific stuff*/ struct usb_ftdi { struct list_head ftdi_list; - struct semaphore u132_lock; + struct mutex u132_lock; int command_next; int command_head; struct u132_command command[COMMAND_SIZE]; @@ -330,39 +330,39 @@ static int ftdi_elan_hcd_init(struct usb_ftdi *ftdi) static void ftdi_elan_abandon_completions(struct usb_ftdi *ftdi) { - down(&ftdi->u132_lock); + mutex_lock(&ftdi->u132_lock); while (ftdi->respond_next > ftdi->respond_head) { struct u132_respond *respond = &ftdi->respond[RESPOND_MASK & ftdi->respond_head++]; *respond->result = -ESHUTDOWN; *respond->value = 0; complete(&respond->wait_completion); - } up(&ftdi->u132_lock); + } mutex_unlock(&ftdi->u132_lock); } static void ftdi_elan_abandon_targets(struct usb_ftdi *ftdi) { int ed_number = 4; - down(&ftdi->u132_lock); + mutex_lock(&ftdi->u132_lock); while (ed_number-- > 0) { struct u132_target *target = &ftdi->target[ed_number]; if (target->active == 1) { target->condition_code = TD_DEVNOTRESP; - up(&ftdi->u132_lock); + mutex_unlock(&ftdi->u132_lock); ftdi_elan_do_callback(ftdi, target, NULL, 0); - down(&ftdi->u132_lock); + mutex_lock(&ftdi->u132_lock); } } ftdi->recieved = 0; ftdi->expected = 4; ftdi->ed_found = 0; - up(&ftdi->u132_lock); + mutex_unlock(&ftdi->u132_lock); } static void ftdi_elan_flush_targets(struct usb_ftdi *ftdi) { int ed_number = 4; - down(&ftdi->u132_lock); + mutex_lock(&ftdi->u132_lock); while (ed_number-- > 0) { struct u132_target *target = &ftdi->target[ed_number]; target->abandoning = 1; @@ -382,9 +382,9 @@ static void ftdi_elan_flush_targets(struct usb_ftdi *ftdi) ftdi->command_next += 1; ftdi_elan_kick_command_queue(ftdi); } else { - up(&ftdi->u132_lock); + mutex_unlock(&ftdi->u132_lock); msleep(100); - down(&ftdi->u132_lock); + mutex_lock(&ftdi->u132_lock); goto wait_1; } } @@ -404,9 +404,9 @@ static void ftdi_elan_flush_targets(struct usb_ftdi *ftdi) ftdi->command_next += 1; ftdi_elan_kick_command_queue(ftdi); } else { - up(&ftdi->u132_lock); + mutex_unlock(&ftdi->u132_lock); msleep(100); - down(&ftdi->u132_lock); + mutex_lock(&ftdi->u132_lock); goto wait_2; } } @@ -414,13 +414,13 @@ static void ftdi_elan_flush_targets(struct usb_ftdi *ftdi) ftdi->recieved = 0; ftdi->expected = 4; ftdi->ed_found = 0; - up(&ftdi->u132_lock); + mutex_unlock(&ftdi->u132_lock); } static void ftdi_elan_cancel_targets(struct usb_ftdi *ftdi) { int ed_number = 4; - down(&ftdi->u132_lock); + mutex_lock(&ftdi->u132_lock); while (ed_number-- > 0) { struct u132_target *target = &ftdi->target[ed_number]; target->abandoning = 1; @@ -440,9 +440,9 @@ static void ftdi_elan_cancel_targets(struct usb_ftdi *ftdi) ftdi->command_next += 1; ftdi_elan_kick_command_queue(ftdi); } else { - up(&ftdi->u132_lock); + mutex_unlock(&ftdi->u132_lock); msleep(100); - down(&ftdi->u132_lock); + mutex_lock(&ftdi->u132_lock); goto wait; } } @@ -450,7 +450,7 @@ static void ftdi_elan_cancel_targets(struct usb_ftdi *ftdi) ftdi->recieved = 0; ftdi->expected = 4; ftdi->ed_found = 0; - up(&ftdi->u132_lock); + mutex_unlock(&ftdi->u132_lock); } static void ftdi_elan_kick_command_queue(struct usb_ftdi *ftdi) @@ -886,14 +886,14 @@ static char *have_ed_set_response(struct usb_ftdi *ftdi, char *b) { int payload = (ed_length >> 0) & 0x07FF; - down(&ftdi->u132_lock); + mutex_lock(&ftdi->u132_lock); target->actual = 0; target->non_null = (ed_length >> 15) & 0x0001; target->repeat_number = (ed_length >> 11) & 0x000F; if (ed_type == 0x02) { if (payload == 0 || target->abandoning > 0) { target->abandoning = 0; - up(&ftdi->u132_lock); + mutex_unlock(&ftdi->u132_lock); ftdi_elan_do_callback(ftdi, target, 4 + ftdi->response, payload); ftdi->recieved = 0; @@ -903,13 +903,13 @@ static char *have_ed_set_response(struct usb_ftdi *ftdi, } else { ftdi->expected = 4 + payload; ftdi->ed_found = 1; - up(&ftdi->u132_lock); + mutex_unlock(&ftdi->u132_lock); return b; } } else if (ed_type == 0x03) { if (payload == 0 || target->abandoning > 0) { target->abandoning = 0; - up(&ftdi->u132_lock); + mutex_unlock(&ftdi->u132_lock); ftdi_elan_do_callback(ftdi, target, 4 + ftdi->response, payload); ftdi->recieved = 0; @@ -919,12 +919,12 @@ static char *have_ed_set_response(struct usb_ftdi *ftdi, } else { ftdi->expected = 4 + payload; ftdi->ed_found = 1; - up(&ftdi->u132_lock); + mutex_unlock(&ftdi->u132_lock); return b; } } else if (ed_type == 0x01) { target->abandoning = 0; - up(&ftdi->u132_lock); + mutex_unlock(&ftdi->u132_lock); ftdi_elan_do_callback(ftdi, target, 4 + ftdi->response, payload); ftdi->recieved = 0; @@ -933,7 +933,7 @@ static char *have_ed_set_response(struct usb_ftdi *ftdi, return ftdi->response; } else { target->abandoning = 0; - up(&ftdi->u132_lock); + mutex_unlock(&ftdi->u132_lock); ftdi_elan_do_callback(ftdi, target, 4 + ftdi->response, payload); ftdi->recieved = 0; @@ -947,12 +947,12 @@ static char *have_ed_get_response(struct usb_ftdi *ftdi, struct u132_target *target, u16 ed_length, int ed_number, int ed_type, char *b) { - down(&ftdi->u132_lock); + mutex_lock(&ftdi->u132_lock); target->condition_code = TD_DEVNOTRESP; target->actual = (ed_length >> 0) & 0x01FF; target->non_null = (ed_length >> 15) & 0x0001; target->repeat_number = (ed_length >> 11) & 0x000F; - up(&ftdi->u132_lock); + mutex_unlock(&ftdi->u132_lock); if (target->active) ftdi_elan_do_callback(ftdi, target, NULL, 0); target->abandoning = 0; @@ -1278,7 +1278,7 @@ static int ftdi_elan_write_reg(struct usb_ftdi *ftdi, u32 data) return -ENODEV; } else { int command_size; - down(&ftdi->u132_lock); + mutex_lock(&ftdi->u132_lock); command_size = ftdi->command_next - ftdi->command_head; if (command_size < COMMAND_SIZE) { struct u132_command *command = &ftdi->command[ @@ -1292,10 +1292,10 @@ static int ftdi_elan_write_reg(struct usb_ftdi *ftdi, u32 data) command->buffer = &command->value; ftdi->command_next += 1; ftdi_elan_kick_command_queue(ftdi); - up(&ftdi->u132_lock); + mutex_unlock(&ftdi->u132_lock); return 0; } else { - up(&ftdi->u132_lock); + mutex_unlock(&ftdi->u132_lock); msleep(100); goto wait; } @@ -1310,7 +1310,7 @@ static int ftdi_elan_write_config(struct usb_ftdi *ftdi, int config_offset, return -ENODEV; } else { int command_size; - down(&ftdi->u132_lock); + mutex_lock(&ftdi->u132_lock); command_size = ftdi->command_next - ftdi->command_head; if (command_size < COMMAND_SIZE) { struct u132_command *command = &ftdi->command[ @@ -1324,10 +1324,10 @@ static int ftdi_elan_write_config(struct usb_ftdi *ftdi, int config_offset, command->buffer = &command->value; ftdi->command_next += 1; ftdi_elan_kick_command_queue(ftdi); - up(&ftdi->u132_lock); + mutex_unlock(&ftdi->u132_lock); return 0; } else { - up(&ftdi->u132_lock); + mutex_unlock(&ftdi->u132_lock); msleep(100); goto wait; } @@ -1342,7 +1342,7 @@ static int ftdi_elan_write_pcimem(struct usb_ftdi *ftdi, int mem_offset, return -ENODEV; } else { int command_size; - down(&ftdi->u132_lock); + mutex_lock(&ftdi->u132_lock); command_size = ftdi->command_next - ftdi->command_head; if (command_size < COMMAND_SIZE) { struct u132_command *command = &ftdi->command[ @@ -1356,10 +1356,10 @@ static int ftdi_elan_write_pcimem(struct usb_ftdi *ftdi, int mem_offset, command->buffer = &command->value; ftdi->command_next += 1; ftdi_elan_kick_command_queue(ftdi); - up(&ftdi->u132_lock); + mutex_unlock(&ftdi->u132_lock); return 0; } else { - up(&ftdi->u132_lock); + mutex_unlock(&ftdi->u132_lock); msleep(100); goto wait; } @@ -1382,7 +1382,7 @@ static int ftdi_elan_read_reg(struct usb_ftdi *ftdi, u32 *data) } else { int command_size; int respond_size; - down(&ftdi->u132_lock); + mutex_lock(&ftdi->u132_lock); command_size = ftdi->command_next - ftdi->command_head; respond_size = ftdi->respond_next - ftdi->respond_head; if (command_size < COMMAND_SIZE && respond_size < RESPOND_SIZE) @@ -1405,11 +1405,11 @@ static int ftdi_elan_read_reg(struct usb_ftdi *ftdi, u32 *data) ftdi->command_next += 1; ftdi->respond_next += 1; ftdi_elan_kick_command_queue(ftdi); - up(&ftdi->u132_lock); + mutex_unlock(&ftdi->u132_lock); wait_for_completion(&respond->wait_completion); return result; } else { - up(&ftdi->u132_lock); + mutex_unlock(&ftdi->u132_lock); msleep(100); goto wait; } @@ -1425,7 +1425,7 @@ static int ftdi_elan_read_config(struct usb_ftdi *ftdi, int config_offset, } else { int command_size; int respond_size; - down(&ftdi->u132_lock); + mutex_lock(&ftdi->u132_lock); command_size = ftdi->command_next - ftdi->command_head; respond_size = ftdi->respond_next - ftdi->respond_head; if (command_size < COMMAND_SIZE && respond_size < RESPOND_SIZE) @@ -1449,11 +1449,11 @@ static int ftdi_elan_read_config(struct usb_ftdi *ftdi, int config_offset, ftdi->command_next += 1; ftdi->respond_next += 1; ftdi_elan_kick_command_queue(ftdi); - up(&ftdi->u132_lock); + mutex_unlock(&ftdi->u132_lock); wait_for_completion(&respond->wait_completion); return result; } else { - up(&ftdi->u132_lock); + mutex_unlock(&ftdi->u132_lock); msleep(100); goto wait; } @@ -1469,7 +1469,7 @@ static int ftdi_elan_read_pcimem(struct usb_ftdi *ftdi, int mem_offset, } else { int command_size; int respond_size; - down(&ftdi->u132_lock); + mutex_lock(&ftdi->u132_lock); command_size = ftdi->command_next - ftdi->command_head; respond_size = ftdi->respond_next - ftdi->respond_head; if (command_size < COMMAND_SIZE && respond_size < RESPOND_SIZE) @@ -1493,11 +1493,11 @@ static int ftdi_elan_read_pcimem(struct usb_ftdi *ftdi, int mem_offset, ftdi->command_next += 1; ftdi->respond_next += 1; ftdi_elan_kick_command_queue(ftdi); - up(&ftdi->u132_lock); + mutex_unlock(&ftdi->u132_lock); wait_for_completion(&respond->wait_completion); return result; } else { - up(&ftdi->u132_lock); + mutex_unlock(&ftdi->u132_lock); msleep(100); goto wait; } @@ -1529,7 +1529,7 @@ static int ftdi_elan_edset_setup(struct usb_ftdi *ftdi, u8 ed_number, return -ENODEV; } else { int command_size; - down(&ftdi->u132_lock); + mutex_lock(&ftdi->u132_lock); command_size = ftdi->command_next - ftdi->command_head; if (command_size < COMMAND_SIZE) { struct u132_target *target = &ftdi->target[ed]; @@ -1550,10 +1550,10 @@ static int ftdi_elan_edset_setup(struct usb_ftdi *ftdi, u8 ed_number, target->active = 1; ftdi->command_next += 1; ftdi_elan_kick_command_queue(ftdi); - up(&ftdi->u132_lock); + mutex_unlock(&ftdi->u132_lock); return 0; } else { - up(&ftdi->u132_lock); + mutex_unlock(&ftdi->u132_lock); msleep(100); goto wait; } @@ -1586,7 +1586,7 @@ static int ftdi_elan_edset_input(struct usb_ftdi *ftdi, u8 ed_number, return -ENODEV; } else { int command_size; - down(&ftdi->u132_lock); + mutex_lock(&ftdi->u132_lock); command_size = ftdi->command_next - ftdi->command_head; if (command_size < COMMAND_SIZE) { struct u132_target *target = &ftdi->target[ed]; @@ -1615,10 +1615,10 @@ static int ftdi_elan_edset_input(struct usb_ftdi *ftdi, u8 ed_number, target->active = 1; ftdi->command_next += 1; ftdi_elan_kick_command_queue(ftdi); - up(&ftdi->u132_lock); + mutex_unlock(&ftdi->u132_lock); return 0; } else { - up(&ftdi->u132_lock); + mutex_unlock(&ftdi->u132_lock); msleep(100); goto wait; } @@ -1651,7 +1651,7 @@ static int ftdi_elan_edset_empty(struct usb_ftdi *ftdi, u8 ed_number, return -ENODEV; } else { int command_size; - down(&ftdi->u132_lock); + mutex_lock(&ftdi->u132_lock); command_size = ftdi->command_next - ftdi->command_head; if (command_size < COMMAND_SIZE) { struct u132_target *target = &ftdi->target[ed]; @@ -1672,10 +1672,10 @@ static int ftdi_elan_edset_empty(struct usb_ftdi *ftdi, u8 ed_number, target->active = 1; ftdi->command_next += 1; ftdi_elan_kick_command_queue(ftdi); - up(&ftdi->u132_lock); + mutex_unlock(&ftdi->u132_lock); return 0; } else { - up(&ftdi->u132_lock); + mutex_unlock(&ftdi->u132_lock); msleep(100); goto wait; } @@ -1708,7 +1708,7 @@ static int ftdi_elan_edset_output(struct usb_ftdi *ftdi, u8 ed_number, return -ENODEV; } else { int command_size; - down(&ftdi->u132_lock); + mutex_lock(&ftdi->u132_lock); command_size = ftdi->command_next - ftdi->command_head; if (command_size < COMMAND_SIZE) { u8 *b; @@ -1751,10 +1751,10 @@ static int ftdi_elan_edset_output(struct usb_ftdi *ftdi, u8 ed_number, target->active = 1; ftdi->command_next += 1; ftdi_elan_kick_command_queue(ftdi); - up(&ftdi->u132_lock); + mutex_unlock(&ftdi->u132_lock); return 0; } else { - up(&ftdi->u132_lock); + mutex_unlock(&ftdi->u132_lock); msleep(100); goto wait; } @@ -1787,7 +1787,7 @@ static int ftdi_elan_edset_single(struct usb_ftdi *ftdi, u8 ed_number, return -ENODEV; } else { int command_size; - down(&ftdi->u132_lock); + mutex_lock(&ftdi->u132_lock); command_size = ftdi->command_next - ftdi->command_head; if (command_size < COMMAND_SIZE) { int remaining_length = urb->transfer_buffer_length - @@ -1816,10 +1816,10 @@ static int ftdi_elan_edset_single(struct usb_ftdi *ftdi, u8 ed_number, target->active = 1; ftdi->command_next += 1; ftdi_elan_kick_command_queue(ftdi); - up(&ftdi->u132_lock); + mutex_unlock(&ftdi->u132_lock); return 0; } else { - up(&ftdi->u132_lock); + mutex_unlock(&ftdi->u132_lock); msleep(100); goto wait; } @@ -1849,9 +1849,9 @@ static int ftdi_elan_edset_flush(struct usb_ftdi *ftdi, u8 ed_number, return -ENODEV; } else { struct u132_target *target = &ftdi->target[ed]; - down(&ftdi->u132_lock); + mutex_lock(&ftdi->u132_lock); if (target->abandoning > 0) { - up(&ftdi->u132_lock); + mutex_unlock(&ftdi->u132_lock); return 0; } else { target->abandoning = 1; @@ -1873,13 +1873,13 @@ static int ftdi_elan_edset_flush(struct usb_ftdi *ftdi, u8 ed_number, ftdi->command_next += 1; ftdi_elan_kick_command_queue(ftdi); } else { - up(&ftdi->u132_lock); + mutex_unlock(&ftdi->u132_lock); msleep(100); - down(&ftdi->u132_lock); + mutex_lock(&ftdi->u132_lock); goto wait_1; } } - up(&ftdi->u132_lock); + mutex_unlock(&ftdi->u132_lock); return 0; } } @@ -2793,7 +2793,7 @@ static int ftdi_elan_probe(struct usb_interface *interface, init_MUTEX(&ftdi->sw_lock); ftdi->udev = usb_get_dev(interface_to_usbdev(interface)); ftdi->interface = interface; - init_MUTEX(&ftdi->u132_lock); + mutex_init(&ftdi->u132_lock); ftdi->expected = 4; iface_desc = interface->cur_altsetting; for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { diff --git a/drivers/usb/misc/idmouse.c b/drivers/usb/misc/idmouse.c index e6fd024024f5..4bcf7fb4e5da 100644 --- a/drivers/usb/misc/idmouse.c +++ b/drivers/usb/misc/idmouse.c @@ -66,6 +66,7 @@ static struct usb_device_id idmouse_table[] = { USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT, value, index, NULL, 0, 1000) MODULE_DEVICE_TABLE(usb, idmouse_table); +static DEFINE_MUTEX(open_disc_mutex); /* structure to hold all of our device specific stuff */ struct usb_idmouse { @@ -80,7 +81,7 @@ struct usb_idmouse { int open; /* if the port is open or not */ int present; /* if the device is not disconnected */ - struct semaphore sem; /* locks this structure */ + struct mutex lock; /* locks this structure */ }; @@ -213,13 +214,17 @@ static int idmouse_open(struct inode *inode, struct file *file) if (!interface) return -ENODEV; + mutex_lock(&open_disc_mutex); /* get the device information block from the interface */ dev = usb_get_intfdata(interface); - if (!dev) + if (!dev) { + mutex_unlock(&open_disc_mutex); return -ENODEV; + } /* lock this device */ - down(&dev->sem); + mutex_lock(&dev->lock); + mutex_unlock(&open_disc_mutex); /* check if already open */ if (dev->open) { @@ -245,7 +250,7 @@ static int idmouse_open(struct inode *inode, struct file *file) error: /* unlock this device */ - up(&dev->sem); + mutex_unlock(&dev->lock); return result; } @@ -258,12 +263,14 @@ static int idmouse_release(struct inode *inode, struct file *file) if (dev == NULL) return -ENODEV; + mutex_lock(&open_disc_mutex); /* lock our device */ - down(&dev->sem); + mutex_lock(&dev->lock); /* are we really open? */ if (dev->open <= 0) { - up(&dev->sem); + mutex_unlock(&dev->lock); + mutex_unlock(&open_disc_mutex); return -ENODEV; } @@ -271,10 +278,12 @@ static int idmouse_release(struct inode *inode, struct file *file) if (!dev->present) { /* the device was unplugged before the file was released */ - up(&dev->sem); + mutex_unlock(&dev->lock); + mutex_unlock(&open_disc_mutex); idmouse_delete(dev); } else { - up(&dev->sem); + mutex_unlock(&dev->lock); + mutex_unlock(&open_disc_mutex); } return 0; } @@ -286,18 +295,18 @@ static ssize_t idmouse_read(struct file *file, char __user *buffer, size_t count int result; /* lock this object */ - down(&dev->sem); + mutex_lock(&dev->lock); /* verify that the device wasn't unplugged */ if (!dev->present) { - up(&dev->sem); + mutex_unlock(&dev->lock); return -ENODEV; } result = simple_read_from_buffer(buffer, count, ppos, dev->bulk_in_buffer, IMGSIZE); /* unlock the device */ - up(&dev->sem); + mutex_unlock(&dev->lock); return result; } @@ -320,7 +329,7 @@ static int idmouse_probe(struct usb_interface *interface, if (dev == NULL) return -ENOMEM; - init_MUTEX(&dev->sem); + mutex_init(&dev->lock); dev->udev = udev; dev->interface = interface; @@ -372,24 +381,26 @@ static void idmouse_disconnect(struct usb_interface *interface) /* get device structure */ dev = usb_get_intfdata(interface); - usb_set_intfdata(interface, NULL); /* give back our minor */ usb_deregister_dev(interface, &idmouse_class); - /* lock it */ - down(&dev->sem); + mutex_lock(&open_disc_mutex); + usb_set_intfdata(interface, NULL); + /* lock the device */ + mutex_lock(&dev->lock); + mutex_unlock(&open_disc_mutex); /* prevent device read, write and ioctl */ dev->present = 0; /* if the device is opened, idmouse_release will clean this up */ if (!dev->open) { - up(&dev->sem); + mutex_unlock(&dev->lock); idmouse_delete(dev); } else { /* unlock */ - up(&dev->sem); + mutex_unlock(&dev->lock); } info("%s disconnected", DRIVER_DESC); diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c index d372fbc4effb..764696ff1e8e 100644 --- a/drivers/usb/misc/iowarrior.c +++ b/drivers/usb/misc/iowarrior.c @@ -66,6 +66,7 @@ module_param(debug, bool, 0644); MODULE_PARM_DESC(debug, "debug=1 enables debugging messages"); static struct usb_driver iowarrior_driver; +static DEFINE_MUTEX(iowarrior_open_disc_lock); /*--------------*/ /* data */ @@ -351,7 +352,7 @@ static ssize_t iowarrior_write(struct file *file, mutex_lock(&dev->mutex); /* verify that the device wasn't unplugged */ - if (dev == NULL || !dev->present) { + if (!dev->present) { retval = -ENODEV; goto exit; } @@ -608,11 +609,15 @@ static int iowarrior_open(struct inode *inode, struct file *file) return -ENODEV; } + mutex_lock(&iowarrior_open_disc_lock); dev = usb_get_intfdata(interface); - if (!dev) + if (!dev) { + mutex_unlock(&iowarrior_open_disc_lock); return -ENODEV; + } mutex_lock(&dev->mutex); + mutex_unlock(&iowarrior_open_disc_lock); /* Only one process can open each device, no sharing. */ if (dev->opened) { @@ -866,6 +871,7 @@ static void iowarrior_disconnect(struct usb_interface *interface) int minor; dev = usb_get_intfdata(interface); + mutex_lock(&iowarrior_open_disc_lock); usb_set_intfdata(interface, NULL); minor = dev->minor; @@ -879,6 +885,7 @@ static void iowarrior_disconnect(struct usb_interface *interface) dev->present = 0; mutex_unlock(&dev->mutex); + mutex_unlock(&iowarrior_open_disc_lock); if (dev->opened) { /* There is a process that holds a filedescriptor to the device , diff --git a/drivers/usb/misc/legousbtower.c b/drivers/usb/misc/legousbtower.c index 561970b889a5..aab320085ebf 100644 --- a/drivers/usb/misc/legousbtower.c +++ b/drivers/usb/misc/legousbtower.c @@ -198,6 +198,7 @@ static struct usb_device_id tower_table [] = { }; MODULE_DEVICE_TABLE (usb, tower_table); +static DEFINE_MUTEX(open_disc_mutex); #define LEGO_USB_TOWER_MINOR_BASE 160 @@ -350,25 +351,31 @@ static int tower_open (struct inode *inode, struct file *file) goto exit; } + mutex_lock(&open_disc_mutex); dev = usb_get_intfdata(interface); if (!dev) { + mutex_unlock(&open_disc_mutex); retval = -ENODEV; goto exit; } /* lock this device */ if (down_interruptible (&dev->sem)) { + mutex_unlock(&open_disc_mutex); retval = -ERESTARTSYS; goto exit; } + /* allow opening only once */ if (dev->open_count) { + mutex_unlock(&open_disc_mutex); retval = -EBUSY; goto unlock_exit; } dev->open_count = 1; + mutex_unlock(&open_disc_mutex); /* reset the tower */ result = usb_control_msg (dev->udev, @@ -437,9 +444,10 @@ static int tower_release (struct inode *inode, struct file *file) if (dev == NULL) { dbg(1, "%s: object is NULL", __FUNCTION__); retval = -ENODEV; - goto exit; + goto exit_nolock; } + mutex_lock(&open_disc_mutex); if (down_interruptible (&dev->sem)) { retval = -ERESTARTSYS; goto exit; @@ -468,6 +476,8 @@ unlock_exit: up (&dev->sem); exit: + mutex_unlock(&open_disc_mutex); +exit_nolock: dbg(2, "%s: leave, return value %d", __FUNCTION__, retval); return retval; } @@ -989,6 +999,7 @@ static void tower_disconnect (struct usb_interface *interface) dbg(2, "%s: enter", __FUNCTION__); dev = usb_get_intfdata (interface); + mutex_lock(&open_disc_mutex); usb_set_intfdata (interface, NULL); minor = dev->minor; @@ -997,6 +1008,7 @@ static void tower_disconnect (struct usb_interface *interface) usb_deregister_dev (interface, &tower_class); down (&dev->sem); + mutex_unlock(&open_disc_mutex); /* if the device is not opened, then we clean up right now */ if (!dev->open_count) { diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c index 88f6abe73624..330c18e390b8 100644 --- a/drivers/usb/misc/rio500.c +++ b/drivers/usb/misc/rio500.c @@ -118,10 +118,7 @@ ioctl_rio(struct inode *inode, struct file *file, unsigned int cmd, mutex_lock(&(rio->lock)); /* Sanity check to make sure rio is connected, powered, etc */ - if ( rio == NULL || - rio->present == 0 || - rio->rio_dev == NULL ) - { + if (rio->present == 0 || rio->rio_dev == NULL) { retval = -ENODEV; goto err_out; } @@ -280,10 +277,7 @@ write_rio(struct file *file, const char __user *buffer, if (intr) return -EINTR; /* Sanity check to make sure rio is connected, powered, etc */ - if ( rio == NULL || - rio->present == 0 || - rio->rio_dev == NULL ) - { + if (rio->present == 0 || rio->rio_dev == NULL) { mutex_unlock(&(rio->lock)); return -ENODEV; } @@ -369,10 +363,7 @@ read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos) if (intr) return -EINTR; /* Sanity check to make sure rio is connected, powered, etc */ - if ( rio == NULL || - rio->present == 0 || - rio->rio_dev == NULL ) - { + if (rio->present == 0 || rio->rio_dev == NULL) { mutex_unlock(&(rio->lock)); return -ENODEV; } diff --git a/drivers/usb/misc/usblcd.c b/drivers/usb/misc/usblcd.c index 719842032712..20777d01db62 100644 --- a/drivers/usb/misc/usblcd.c +++ b/drivers/usb/misc/usblcd.c @@ -17,6 +17,7 @@ #include <linux/init.h> #include <linux/slab.h> #include <linux/errno.h> +#include <linux/mutex.h> #include <asm/uaccess.h> #include <linux/usb.h> @@ -34,6 +35,8 @@ static struct usb_device_id id_table [] = { }; MODULE_DEVICE_TABLE (usb, id_table); +static DEFINE_MUTEX(open_disc_mutex); + struct usb_lcd { struct usb_device * udev; /* init: probe_lcd */ @@ -79,12 +82,16 @@ static int lcd_open(struct inode *inode, struct file *file) return -ENODEV; } + mutex_lock(&open_disc_mutex); dev = usb_get_intfdata(interface); - if (!dev) + if (!dev) { + mutex_unlock(&open_disc_mutex); return -ENODEV; + } /* increment our usage count for the device */ kref_get(&dev->kref); + mutex_unlock(&open_disc_mutex); /* grab a power reference */ r = usb_autopm_get_interface(interface); @@ -393,8 +400,10 @@ static void lcd_disconnect(struct usb_interface *interface) struct usb_lcd *dev; int minor = interface->minor; + mutex_lock(&open_disc_mutex); dev = usb_get_intfdata(interface); usb_set_intfdata(interface, NULL); + mutex_unlock(&open_disc_mutex); /* give back our minor */ usb_deregister_dev(interface, &lcd_class); diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c index 2a8e537cb046..ddfee918000d 100644 --- a/drivers/usb/serial/ark3116.c +++ b/drivers/usb/serial/ark3116.c @@ -161,7 +161,8 @@ static void ark3116_set_termios(struct usb_serial_port *port, { struct usb_serial *serial = port->serial; struct ark3116_private *priv = usb_get_serial_port_data(port); - unsigned int cflag = port->tty->termios->c_cflag; + struct ktermios *termios = port->tty->termios; + unsigned int cflag = termios->c_cflag; unsigned long flags; int baud; int ark3116_baud; @@ -177,11 +178,14 @@ static void ark3116_set_termios(struct usb_serial_port *port, *(port->tty->termios) = tty_std_termios; port->tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; + termios->c_ispeed = 9600; + termios->c_ospeed = 9600; priv->termios_initialized = 1; } spin_unlock_irqrestore(&priv->lock, flags); - cflag = port->tty->termios->c_cflag; + cflag = termios->c_cflag; + termios->c_cflag &= ~(CMSPAR|CRTSCTS); buf = kmalloc(1, GFP_KERNEL); if (!buf) { @@ -254,9 +258,13 @@ static void ark3116_set_termios(struct usb_serial_port *port, case 115200: case 230400: case 460800: + /* Report the resulting rate back to the caller */ + tty_encode_baud_rate(port->tty, baud, baud); break; /* set 9600 as default (if given baudrate is invalid for example) */ default: + tty_encode_baud_rate(port->tty, 9600, 9600); + case 0: baud = 9600; } @@ -302,6 +310,7 @@ static void ark3116_set_termios(struct usb_serial_port *port, /* TEST ARK3116_SND(154, 0xFE, 0x40, 0xFFFF, 0x0006); */ kfree(buf); + return; } diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 6b252ceb39a8..42582d49b69c 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -272,9 +272,6 @@ static void ch341_set_termios(struct usb_serial_port *port, dbg("ch341_set_termios()"); - if (!tty || !tty->termios) - return; - baud_rate = tty_get_baud_rate(tty); switch (baud_rate) { @@ -299,6 +296,11 @@ static void ch341_set_termios(struct usb_serial_port *port, * (cflag & PARENB) : parity {NONE, EVEN, ODD} * (cflag & CSTOPB) : stop bits [1, 2] */ + + /* Copy back the old hardware settings */ + tty_termios_copy_hw(tty->termios, old_termios); + /* And re-encode with the new baud */ + tty_encode_baud_rate(tty, baud_rate, baud_rate); } static struct usb_driver ch341_driver = { diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c index 9386e216d681..0362654d3b52 100644 --- a/drivers/usb/serial/console.c +++ b/drivers/usb/serial/console.c @@ -164,6 +164,7 @@ static int usb_console_setup(struct console *co, char *options) } if (serial->type->set_termios) { + struct ktermios dummy; /* build up a fake tty structure so that the open call has something * to look at to get the cflag value */ tty = kzalloc(sizeof(*tty), GFP_KERNEL); @@ -177,12 +178,13 @@ static int usb_console_setup(struct console *co, char *options) kfree (tty); return -ENOMEM; } + memset(&dummy, 0, sizeof(struct ktermios)); termios->c_cflag = cflag; tty->termios = termios; port->tty = tty; /* set up the initial termios settings */ - serial->type->set_termios(port, NULL); + serial->type->set_termios(port, &dummy); port->tty = NULL; kfree (termios); kfree (tty); diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index eb7df1835c11..3a83cb4c4bc2 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -361,7 +361,6 @@ static void cp2101_get_termios (struct usb_serial_port *port) dbg("%s - no tty structures", __FUNCTION__); return; } - cflag = port->tty->termios->c_cflag; cp2101_get_config(port, CP2101_BAUDRATE, &baud, 2); /* Convert to baudrate */ @@ -369,40 +368,9 @@ static void cp2101_get_termios (struct usb_serial_port *port) baud = BAUD_RATE_GEN_FREQ / baud; dbg("%s - baud rate = %d", __FUNCTION__, baud); - cflag &= ~CBAUD; - switch (baud) { - /* - * The baud rates which are commented out below - * appear to be supported by the device - * but are non-standard - */ - case 600: cflag |= B600; break; - case 1200: cflag |= B1200; break; - case 1800: cflag |= B1800; break; - case 2400: cflag |= B2400; break; - case 4800: cflag |= B4800; break; - /*case 7200: cflag |= B7200; break;*/ - case 9600: cflag |= B9600; break; - /*case 14400: cflag |= B14400; break;*/ - case 19200: cflag |= B19200; break; - /*case 28800: cflag |= B28800; break;*/ - case 38400: cflag |= B38400; break; - /*case 55854: cflag |= B55054; break;*/ - case 57600: cflag |= B57600; break; - case 115200: cflag |= B115200; break; - /*case 127117: cflag |= B127117; break;*/ - case 230400: cflag |= B230400; break; - case 460800: cflag |= B460800; break; - case 921600: cflag |= B921600; break; - /*case 3686400: cflag |= B3686400; break;*/ - default: - dbg("%s - Baud rate is not supported, " - "using 9600 baud", __FUNCTION__); - cflag |= B9600; - cp2101_set_config_single(port, CP2101_BAUDRATE, - (BAUD_RATE_GEN_FREQ/9600)); - break; - } + + tty_encode_baud_rate(port->tty, baud, baud); + cflag = port->tty->termios->c_cflag; cp2101_get_config(port, CP2101_BITS, &bits, 2); cflag &= ~CSIZE; @@ -516,7 +484,7 @@ static void cp2101_get_termios (struct usb_serial_port *port) static void cp2101_set_termios (struct usb_serial_port *port, struct ktermios *old_termios) { - unsigned int cflag, old_cflag=0; + unsigned int cflag, old_cflag; int baud=0, bits; unsigned int modem_ctl[4]; @@ -526,6 +494,8 @@ static void cp2101_set_termios (struct usb_serial_port *port, dbg("%s - no tty structures", __FUNCTION__); return; } + port->tty->termios->c_cflag &= ~CMSPAR; + cflag = port->tty->termios->c_cflag; old_cflag = old_termios->c_cflag; baud = tty_get_baud_rate(port->tty); @@ -563,11 +533,15 @@ static void cp2101_set_termios (struct usb_serial_port *port, dbg("%s - Setting baud rate to %d baud", __FUNCTION__, baud); if (cp2101_set_config_single(port, CP2101_BAUDRATE, - (BAUD_RATE_GEN_FREQ / baud))) + (BAUD_RATE_GEN_FREQ / baud))) { dev_err(&port->dev, "Baud rate requested not " "supported by device\n"); + baud = tty_termios_baud_rate(old_termios); + } } } + /* Report back the resulting baud rate */ + tty_encode_baud_rate(port->tty, baud, baud); /* If the number of data bits is to be updated */ if ((cflag & CSIZE) != (old_cflag & CSIZE)) { diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c index dab2e66d111d..ae410c4678ea 100644 --- a/drivers/usb/serial/digi_acceleport.c +++ b/drivers/usb/serial/digi_acceleport.c @@ -973,6 +973,8 @@ static void digi_set_termios(struct usb_serial_port *port, } } /* set parity */ + tty->termios->c_cflag &= ~CMSPAR; + if ((cflag&(PARENB|PARODD)) != (old_cflag&(PARENB|PARODD))) { if (cflag&PARENB) { if (cflag&PARODD) @@ -1054,15 +1056,15 @@ static void digi_set_termios(struct usb_serial_port *port, } /* set output flow control */ - if ((iflag&IXON) != (old_iflag&IXON) - || (cflag&CRTSCTS) != (old_cflag&CRTSCTS)) { + if ((iflag & IXON) != (old_iflag & IXON) + || (cflag & CRTSCTS) != (old_cflag & CRTSCTS)) { arg = 0; - if (iflag&IXON) + if (iflag & IXON) arg |= DIGI_OUTPUT_FLOW_CONTROL_XON_XOFF; else arg &= ~DIGI_OUTPUT_FLOW_CONTROL_XON_XOFF; - if (cflag&CRTSCTS) { + if (cflag & CRTSCTS) { arg |= DIGI_OUTPUT_FLOW_CONTROL_CTS; } else { arg &= ~DIGI_OUTPUT_FLOW_CONTROL_CTS; @@ -1076,8 +1078,8 @@ static void digi_set_termios(struct usb_serial_port *port, } /* set receive enable/disable */ - if ((cflag&CREAD) != (old_cflag&CREAD)) { - if (cflag&CREAD) + if ((cflag & CREAD) != (old_cflag & CREAD)) { + if (cflag & CREAD) arg = DIGI_ENABLE; else arg = DIGI_DISABLE; @@ -1089,7 +1091,7 @@ static void digi_set_termios(struct usb_serial_port *port, } if ((ret = digi_write_oob_command(port, buf, i, 1)) != 0) dbg("digi_set_termios: write oob failed, ret=%d", ret); - + tty_encode_baud_rate(tty, baud, baud); } diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index 050fcc996f56..a5c8e1e17ea5 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -449,14 +449,9 @@ static int empeg_ioctl (struct usb_serial_port *port, struct file * file, unsign static void empeg_set_termios (struct usb_serial_port *port, struct ktermios *old_termios) { - + struct ktermios *termios = port->tty->termios; dbg("%s - port %d", __FUNCTION__, port->number); - if ((!port->tty) || (!port->tty->termios)) { - dbg("%s - no tty structures", __FUNCTION__); - return; - } - /* * The empeg-car player wants these particular tty settings. * You could, for example, change the baud rate, however the @@ -466,7 +461,7 @@ static void empeg_set_termios (struct usb_serial_port *port, struct ktermios *ol * * The default requirements for this device are: */ - port->tty->termios->c_iflag + termios->c_iflag &= ~(IGNBRK /* disable ignore break */ | BRKINT /* disable break causes interrupt */ | PARMRK /* disable mark parity errors */ @@ -476,24 +471,23 @@ static void empeg_set_termios (struct usb_serial_port *port, struct ktermios *ol | ICRNL /* disable translate CR to NL */ | IXON); /* disable enable XON/XOFF flow control */ - port->tty->termios->c_oflag + termios->c_oflag &= ~OPOST; /* disable postprocess output characters */ - port->tty->termios->c_lflag + termios->c_lflag &= ~(ECHO /* disable echo input characters */ | ECHONL /* disable echo new line */ | ICANON /* disable erase, kill, werase, and rprnt special characters */ | ISIG /* disable interrupt, quit, and suspend special characters */ | IEXTEN); /* disable non-POSIX special characters */ - port->tty->termios->c_cflag + termios->c_cflag &= ~(CSIZE /* no size */ | PARENB /* disable parity bit */ | CBAUD); /* clear current baud rate */ - port->tty->termios->c_cflag - |= (CS8 /* character size 8 bits */ - | B115200); /* baud rate 115200 */ + termios->c_cflag + |= CS8; /* character size 8 bits */ /* * Force low_latency on; otherwise the pushes are scheduled; @@ -501,8 +495,7 @@ static void empeg_set_termios (struct usb_serial_port *port, struct ktermios *ol * on the floor. We don't want to drop bytes on the floor. :) */ port->tty->low_latency = 1; - - return; + tty_encode_baud_rate(port->tty, 115200, 115200); } diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 8a8a6b9fb05b..c40e77dccf8e 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -294,7 +294,7 @@ struct ftdi_private { __u16 interface; /* FT2232C port interface (0 for FT232/245) */ - int force_baud; /* if non-zero, force the baud rate to this value */ + speed_t force_baud; /* if non-zero, force the baud rate to this value */ int force_rtscts; /* if non-zero, force RTS-CTS to always be enabled */ spinlock_t tx_lock; /* spinlock for transmit state */ @@ -878,6 +878,7 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port) if (div_value == 0) { dbg("%s - Baudrate (%d) requested is not supported", __FUNCTION__, baud); div_value = ftdi_sio_b9600; + baud = 9600; div_okay = 0; } break; @@ -886,6 +887,7 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port) div_value = ftdi_232am_baud_to_divisor(baud); } else { dbg("%s - Baud rate too high!", __FUNCTION__); + baud = 9600; div_value = ftdi_232am_baud_to_divisor(9600); div_okay = 0; } @@ -899,6 +901,7 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port) dbg("%s - Baud rate too high!", __FUNCTION__); div_value = ftdi_232bm_baud_to_divisor(9600); div_okay = 0; + baud = 9600; } break; } /* priv->chip_type */ @@ -909,6 +912,7 @@ static __u32 get_ftdi_divisor(struct usb_serial_port * port) ftdi_chip_name[priv->chip_type]); } + tty_encode_baud_rate(port->tty, baud, baud); return(div_value); } @@ -1263,7 +1267,7 @@ static void ftdi_USB_UIRT_setup (struct ftdi_private *priv) priv->flags |= ASYNC_SPD_CUST; priv->custom_divisor = 77; - priv->force_baud = B38400; + priv->force_baud = 38400; } /* ftdi_USB_UIRT_setup */ /* Setup for the HE-TIRA1 device, which requires hardwired @@ -1274,7 +1278,7 @@ static void ftdi_HE_TIRA1_setup (struct ftdi_private *priv) priv->flags |= ASYNC_SPD_CUST; priv->custom_divisor = 240; - priv->force_baud = B38400; + priv->force_baud = 38400; priv->force_rtscts = 1; } /* ftdi_HE_TIRA1_setup */ @@ -1363,7 +1367,7 @@ static int ftdi_open (struct usb_serial_port *port, struct file *filp) /* ftdi_set_termios will send usb control messages */ if (port->tty) - ftdi_set_termios(port, NULL); + ftdi_set_termios(port, port->tty->termios); /* FIXME: Flow control might be enabled, so it should be checked - we have no control of defaults! */ @@ -1933,32 +1937,33 @@ static void ftdi_break_ctl( struct usb_serial_port *port, int break_state ) static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios *old_termios) { /* ftdi_termios */ struct usb_device *dev = port->serial->dev; - unsigned int cflag = port->tty->termios->c_cflag; struct ftdi_private *priv = usb_get_serial_port_data(port); + struct ktermios *termios = port->tty->termios; + unsigned int cflag = termios->c_cflag; __u16 urb_value; /* will hold the new flags */ char buf[1]; /* Perhaps I should dynamically alloc this? */ // Added for xon/xoff support - unsigned int iflag = port->tty->termios->c_iflag; + unsigned int iflag = termios->c_iflag; unsigned char vstop; unsigned char vstart; dbg("%s", __FUNCTION__); /* Force baud rate if this device requires it, unless it is set to B0. */ - if (priv->force_baud && ((port->tty->termios->c_cflag & CBAUD) != B0)) { + if (priv->force_baud && ((termios->c_cflag & CBAUD) != B0)) { dbg("%s: forcing baud rate for this device", __FUNCTION__); - port->tty->termios->c_cflag &= ~CBAUD; - port->tty->termios->c_cflag |= priv->force_baud; + tty_encode_baud_rate(port->tty, priv->force_baud, + priv->force_baud); } /* Force RTS-CTS if this device requires it. */ if (priv->force_rtscts) { dbg("%s: forcing rtscts for this device", __FUNCTION__); - port->tty->termios->c_cflag |= CRTSCTS; + termios->c_cflag |= CRTSCTS; } - cflag = port->tty->termios->c_cflag; + cflag = termios->c_cflag; /* FIXME -For this cut I don't care if the line is really changing or not - so just do the change regardless - should be able to @@ -1969,6 +1974,8 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios *old /* Set number of data bits, parity, stop bits */ + termios->c_cflag &= ~CMSPAR; + urb_value = 0; urb_value |= (cflag & CSTOPB ? FTDI_SIO_SET_DATA_STOP_BITS_2 : FTDI_SIO_SET_DATA_STOP_BITS_1); @@ -2048,8 +2055,8 @@ static void ftdi_set_termios (struct usb_serial_port *port, struct ktermios *old // Set the vstart and vstop -- could have been done up above where // a lot of other dereferencing is done but that would be very // inefficient as vstart and vstop are not always needed - vstart=port->tty->termios->c_cc[VSTART]; - vstop=port->tty->termios->c_cc[VSTOP]; + vstart = termios->c_cc[VSTART]; + vstop = termios->c_cc[VSTOP]; urb_value=(vstop << 8) | (vstart); if (usb_control_msg(dev, diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 88a2c7dce335..9eb4a65ee4d9 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -208,14 +208,15 @@ int usb_serial_generic_write(struct usb_serial_port *port, const unsigned char * /* only do something if we have a bulk out endpoint */ if (serial->num_bulk_out) { - spin_lock_bh(&port->lock); + unsigned long flags; + spin_lock_irqsave(&port->lock, flags); if (port->write_urb_busy) { - spin_unlock_bh(&port->lock); + spin_unlock_irqrestore(&port->lock, flags); dbg("%s - already writing", __FUNCTION__); return 0; } port->write_urb_busy = 1; - spin_unlock_bh(&port->lock); + spin_unlock_irqrestore(&port->lock, flags); count = (count > port->bulk_out_size) ? port->bulk_out_size : count; diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c index 8dd3abc99d63..a5d2e115e167 100644 --- a/drivers/usb/serial/io_edgeport.c +++ b/drivers/usb/serial/io_edgeport.c @@ -1503,22 +1503,16 @@ static void edge_unthrottle (struct usb_serial_port *port) *****************************************************************************/ static void edge_set_termios (struct usb_serial_port *port, struct ktermios *old_termios) { + /* FIXME: This function appears unused ?? */ struct edgeport_port *edge_port = usb_get_serial_port_data(port); struct tty_struct *tty = port->tty; unsigned int cflag; - if (!port->tty || !port->tty->termios) { - dbg ("%s - no tty or termios", __FUNCTION__); - return; - } - cflag = tty->termios->c_cflag; dbg("%s - clfag %08x iflag %08x", __FUNCTION__, tty->termios->c_cflag, tty->termios->c_iflag); - if (old_termios) { - dbg("%s - old clfag %08x old iflag %08x", __FUNCTION__, - old_termios->c_cflag, old_termios->c_iflag); - } + dbg("%s - old clfag %08x old iflag %08x", __FUNCTION__, + old_termios->c_cflag, old_termios->c_iflag); dbg("%s - port %d", __FUNCTION__, port->number); @@ -2653,7 +2647,11 @@ static void change_port_settings (struct edgeport_port *edge_port, struct ktermi dbg("%s - baud rate = %d", __FUNCTION__, baud); status = send_cmd_write_baud_rate (edge_port, baud); - + if (status == -1) { + /* Speed change was not possible - put back the old speed */ + baud = tty_termios_baud_rate(old_termios); + tty_encode_baud_rate(tty, baud, baud); + } return; } diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index 5ab6a0c5ac52..6b803ab98543 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -504,11 +504,6 @@ static void ir_set_termios (struct usb_serial_port *port, struct ktermios *old_t dbg("%s - port %d", __FUNCTION__, port->number); - if ((!port->tty) || (!port->tty->termios)) { - dbg("%s - no tty structures", __FUNCTION__); - return; - } - baud = tty_get_baud_rate(port->tty); /* @@ -531,8 +526,6 @@ static void ir_set_termios (struct usb_serial_port *port, struct ktermios *old_t default: ir_baud = SPEED_9600; baud = 9600; - /* And once the new tty stuff is all done we need to - call back to correct the baud bits */ } if (xbof == -1) @@ -562,6 +555,10 @@ static void ir_set_termios (struct usb_serial_port *port, struct ktermios *old_t result = usb_submit_urb (port->write_urb, GFP_KERNEL); if (result) dev_err(&port->dev, "%s - failed submitting write urb, error %d\n", __FUNCTION__, result); + + /* Only speed changes are supported */ + tty_termios_copy_hw(port->tty->termios, old_termios); + tty_encode_baud_rate(port->tty, baud, baud); } diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index f2a6fce5de1e..6bfdba6a213f 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -278,29 +278,35 @@ static void keyspan_set_termios (struct usb_serial_port *port, struct keyspan_port_private *p_priv; const struct keyspan_device_details *d_details; unsigned int cflag; + struct tty_struct *tty = port->tty; dbg("%s", __FUNCTION__); p_priv = usb_get_serial_port_data(port); d_details = p_priv->device_details; - cflag = port->tty->termios->c_cflag; + cflag = tty->termios->c_cflag; device_port = port->number - port->serial->minor; /* Baud rate calculation takes baud rate as an integer so other rates can be generated if desired. */ - baud_rate = tty_get_baud_rate(port->tty); + baud_rate = tty_get_baud_rate(tty); /* If no match or invalid, don't change */ - if (baud_rate >= 0 - && d_details->calculate_baud_rate(baud_rate, d_details->baudclk, + if (d_details->calculate_baud_rate(baud_rate, d_details->baudclk, NULL, NULL, NULL, device_port) == KEYSPAN_BAUD_RATE_OK) { /* FIXME - more to do here to ensure rate changes cleanly */ + /* FIXME - calcuate exact rate from divisor ? */ p_priv->baud = baud_rate; - } + } else + baud_rate = tty_termios_baud_rate(old_termios); + tty_encode_baud_rate(tty, baud_rate, baud_rate); /* set CTS/RTS handshake etc. */ p_priv->cflag = cflag; p_priv->flow_control = (cflag & CRTSCTS)? flow_cts: flow_none; + /* Mark/Space not supported */ + tty->termios->c_cflag &= ~CMSPAR; + keyspan_send_setup(port, 0); } diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index 6f224195bd25..aee450246bfd 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -616,8 +616,9 @@ static void kobil_set_termios(struct usb_serial_port *port, struct ktermios *old case 1200: urb_val = SUSBCR_SBR_1200; break; - case 9600: default: + speed = 9600; + case 9600: urb_val = SUSBCR_SBR_9600; break; } @@ -641,6 +642,8 @@ static void kobil_set_termios(struct usb_serial_port *port, struct ktermios *old urb_val |= SUSBCR_SPASB_NoParity; strcat(settings, "No Parity"); } + port->tty->termios->c_cflag &= ~CMSPAR; + tty_encode_baud_rate(port->tty, speed, speed); result = usb_control_msg( port->serial->dev, usb_rcvctrlpipe(port->serial->dev, 0 ), diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index f76480f1455d..a5ced7e08cbf 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -1977,11 +1977,6 @@ static void mos7840_change_port_settings(struct moschip_port *mos7840_port, tty = mos7840_port->port->tty; - if ((!tty) || (!tty->termios)) { - dbg("%s - no tty structures", __FUNCTION__); - return; - } - dbg("%s", "Entering .......... \n"); lData = LCR_BITS_8; @@ -2151,11 +2146,6 @@ static void mos7840_set_termios(struct usb_serial_port *port, tty = port->tty; - if (!port->tty || !port->tty->termios) { - dbg("%s - no tty or termios", __FUNCTION__); - return; - } - if (!mos7840_port->open) { dbg("%s - port not opened", __FUNCTION__); return; @@ -2165,19 +2155,10 @@ static void mos7840_set_termios(struct usb_serial_port *port, cflag = tty->termios->c_cflag; - if (!cflag) { - dbg("%s %s\n", __FUNCTION__, "cflag is NULL"); - return; - } - dbg("%s - clfag %08x iflag %08x", __FUNCTION__, tty->termios->c_cflag, RELEVANT_IFLAG(tty->termios->c_iflag)); - - if (old_termios) { - dbg("%s - old clfag %08x old iflag %08x", __FUNCTION__, - old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag)); - } - + dbg("%s - old clfag %08x old iflag %08x", __FUNCTION__, + old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag)); dbg("%s - port %d", __FUNCTION__, port->number); /* change the port settings to the new ones specified */ diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index a18659e0700c..4590124cf888 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -172,6 +172,8 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2110) }, /* Novatel Merlin ES620 / Merlin ES720 / Ovation U720 */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2130) }, /* Novatel Merlin ES620 SM Bus */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x2410) }, /* Novatel EU740 */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x4100) }, /* Novatel U727 */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, 0x4400) }, /* Novatel MC950 */ { USB_DEVICE(DELL_VENDOR_ID, 0x8114) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite EV620 CDMA/EV-DO */ { USB_DEVICE(DELL_VENDOR_ID, 0x8115) }, /* Dell Wireless 5500 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */ { USB_DEVICE(DELL_VENDOR_ID, 0x8116) }, /* Dell Wireless 5505 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */ @@ -311,7 +313,8 @@ static void option_set_termios(struct usb_serial_port *port, struct ktermios *old_termios) { dbg("%s", __FUNCTION__); - + /* Doesn't support option setting */ + tty_termios_copy_hw(port->tty->termios, old_termios); option_send_setup(port); } diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 1da57fd9ea23..2cd3f1d4b687 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -56,6 +56,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ3) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_PHAROS) }, { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) }, + { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) }, { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) }, { USB_DEVICE(ATEN_VENDOR_ID2, ATEN_PRODUCT_ID) }, { USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID) }, @@ -470,16 +471,13 @@ static void pl2303_set_termios(struct usb_serial_port *port, dbg("%s - port %d", __FUNCTION__, port->number); - if ((!port->tty) || (!port->tty->termios)) { - dbg("%s - no tty structures", __FUNCTION__); - return; - } - spin_lock_irqsave(&priv->lock, flags); if (!priv->termios_initialized) { *(port->tty->termios) = tty_std_termios; port->tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL; + port->tty->termios->c_ispeed = 9600; + port->tty->termios->c_ospeed = 9600; priv->termios_initialized = 1; } spin_unlock_irqrestore(&priv->lock, flags); @@ -596,6 +594,10 @@ static void pl2303_set_termios(struct usb_serial_port *port, dbg ("0x40:0x1:0x0:0x0 %d", i); } + /* FIXME: Need to read back resulting baud rate */ + if (baud) + tty_encode_baud_rate(port->tty, baud, baud); + kfree(buf); } diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index c39bace5cbcc..ed603e3decd6 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -20,6 +20,7 @@ #define IODATA_VENDOR_ID 0x04bb #define IODATA_PRODUCT_ID 0x0a03 +#define IODATA_PRODUCT_ID_RSAQ5 0x0a0e #define ELCOM_VENDOR_ID 0x056e #define ELCOM_PRODUCT_ID 0x5003 diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index 959b3e4e9077..833f6e1e3721 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -224,7 +224,7 @@ static void sierra_set_termios(struct usb_serial_port *port, struct ktermios *old_termios) { dbg("%s", __FUNCTION__); - + tty_termios_copy_hw(port->tty->termios, old_termios); sierra_send_setup(port); } diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 4b1bd7def4a5..497e29a700ca 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -429,6 +429,8 @@ static void serial_set_termios (struct tty_struct *tty, struct ktermios * old) /* pass on to the driver specific version of this function if it is available */ if (port->serial->type->set_termios) port->serial->type->set_termios(port, old); + else + tty_termios_copy_hw(tty->termios, old); } static void serial_break (struct tty_struct *tty, int break_state) @@ -1121,7 +1123,9 @@ int usb_serial_resume(struct usb_interface *intf) { struct usb_serial *serial = usb_get_intfdata(intf); - return serial->type->resume(serial); + if (serial->type->resume) + return serial->type->resume(serial); + return 0; } EXPORT_SYMBOL(usb_serial_resume); diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c index cc8b44c08712..ee5dd8b5a713 100644 --- a/drivers/usb/serial/whiteheat.c +++ b/drivers/usb/serial/whiteheat.c @@ -885,16 +885,7 @@ static int whiteheat_ioctl (struct usb_serial_port *port, struct file * file, un static void whiteheat_set_termios(struct usb_serial_port *port, struct ktermios *old_termios) { dbg("%s -port %d", __FUNCTION__, port->number); - - if ((!port->tty) || (!port->tty->termios)) { - dbg("%s - no tty structures", __FUNCTION__); - goto exit; - } - firm_setup_port(port); - -exit: - return; } @@ -1244,6 +1235,8 @@ static int firm_setup_port(struct usb_serial_port *port) { port_settings.baud = tty_get_baud_rate(port->tty); dbg("%s - baud rate = %d", __FUNCTION__, port_settings.baud); + /* fixme: should set validated settings */ + tty_encode_baud_rate(port->tty, port_settings.baud, port_settings.baud); /* handle any settings that aren't specified in the tty structure */ port_settings.lloop = 0; diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index fe2c4cd53f5a..7e53333be013 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -48,7 +48,6 @@ config USB_STORAGE_FREECOM config USB_STORAGE_ISD200 bool "ISD-200 USB/ATA Bridge support" depends on USB_STORAGE - depends on BLK_DEV_IDE=y || BLK_DEV_IDE=USB_STORAGE ---help--- Say Y here if you want to use USB Mass Store devices based on the In-Systems Design ISD-200 USB/ATA bridge. diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c index 93a7724e167a..49ba6c0ff1e8 100644 --- a/drivers/usb/storage/isd200.c +++ b/drivers/usb/storage/isd200.c @@ -977,6 +977,109 @@ static int isd200_manual_enum(struct us_data *us) return(retStatus); } +/* + * We are the last non IDE user of the legacy IDE ident structures + * and we thus want to keep a private copy of this function so the + * driver can be used without the obsolete drivers/ide layer + */ + +static void isd200_fix_driveid (struct hd_driveid *id) +{ +#ifndef __LITTLE_ENDIAN +# ifdef __BIG_ENDIAN + int i; + u16 *stringcast; + + id->config = __le16_to_cpu(id->config); + id->cyls = __le16_to_cpu(id->cyls); + id->reserved2 = __le16_to_cpu(id->reserved2); + id->heads = __le16_to_cpu(id->heads); + id->track_bytes = __le16_to_cpu(id->track_bytes); + id->sector_bytes = __le16_to_cpu(id->sector_bytes); + id->sectors = __le16_to_cpu(id->sectors); + id->vendor0 = __le16_to_cpu(id->vendor0); + id->vendor1 = __le16_to_cpu(id->vendor1); + id->vendor2 = __le16_to_cpu(id->vendor2); + stringcast = (u16 *)&id->serial_no[0]; + for (i = 0; i < (20/2); i++) + stringcast[i] = __le16_to_cpu(stringcast[i]); + id->buf_type = __le16_to_cpu(id->buf_type); + id->buf_size = __le16_to_cpu(id->buf_size); + id->ecc_bytes = __le16_to_cpu(id->ecc_bytes); + stringcast = (u16 *)&id->fw_rev[0]; + for (i = 0; i < (8/2); i++) + stringcast[i] = __le16_to_cpu(stringcast[i]); + stringcast = (u16 *)&id->model[0]; + for (i = 0; i < (40/2); i++) + stringcast[i] = __le16_to_cpu(stringcast[i]); + id->dword_io = __le16_to_cpu(id->dword_io); + id->reserved50 = __le16_to_cpu(id->reserved50); + id->field_valid = __le16_to_cpu(id->field_valid); + id->cur_cyls = __le16_to_cpu(id->cur_cyls); + id->cur_heads = __le16_to_cpu(id->cur_heads); + id->cur_sectors = __le16_to_cpu(id->cur_sectors); + id->cur_capacity0 = __le16_to_cpu(id->cur_capacity0); + id->cur_capacity1 = __le16_to_cpu(id->cur_capacity1); + id->lba_capacity = __le32_to_cpu(id->lba_capacity); + id->dma_1word = __le16_to_cpu(id->dma_1word); + id->dma_mword = __le16_to_cpu(id->dma_mword); + id->eide_pio_modes = __le16_to_cpu(id->eide_pio_modes); + id->eide_dma_min = __le16_to_cpu(id->eide_dma_min); + id->eide_dma_time = __le16_to_cpu(id->eide_dma_time); + id->eide_pio = __le16_to_cpu(id->eide_pio); + id->eide_pio_iordy = __le16_to_cpu(id->eide_pio_iordy); + for (i = 0; i < 2; ++i) + id->words69_70[i] = __le16_to_cpu(id->words69_70[i]); + for (i = 0; i < 4; ++i) + id->words71_74[i] = __le16_to_cpu(id->words71_74[i]); + id->queue_depth = __le16_to_cpu(id->queue_depth); + for (i = 0; i < 4; ++i) + id->words76_79[i] = __le16_to_cpu(id->words76_79[i]); + id->major_rev_num = __le16_to_cpu(id->major_rev_num); + id->minor_rev_num = __le16_to_cpu(id->minor_rev_num); + id->command_set_1 = __le16_to_cpu(id->command_set_1); + id->command_set_2 = __le16_to_cpu(id->command_set_2); + id->cfsse = __le16_to_cpu(id->cfsse); + id->cfs_enable_1 = __le16_to_cpu(id->cfs_enable_1); + id->cfs_enable_2 = __le16_to_cpu(id->cfs_enable_2); + id->csf_default = __le16_to_cpu(id->csf_default); + id->dma_ultra = __le16_to_cpu(id->dma_ultra); + id->trseuc = __le16_to_cpu(id->trseuc); + id->trsEuc = __le16_to_cpu(id->trsEuc); + id->CurAPMvalues = __le16_to_cpu(id->CurAPMvalues); + id->mprc = __le16_to_cpu(id->mprc); + id->hw_config = __le16_to_cpu(id->hw_config); + id->acoustic = __le16_to_cpu(id->acoustic); + id->msrqs = __le16_to_cpu(id->msrqs); + id->sxfert = __le16_to_cpu(id->sxfert); + id->sal = __le16_to_cpu(id->sal); + id->spg = __le32_to_cpu(id->spg); + id->lba_capacity_2 = __le64_to_cpu(id->lba_capacity_2); + for (i = 0; i < 22; i++) + id->words104_125[i] = __le16_to_cpu(id->words104_125[i]); + id->last_lun = __le16_to_cpu(id->last_lun); + id->word127 = __le16_to_cpu(id->word127); + id->dlf = __le16_to_cpu(id->dlf); + id->csfo = __le16_to_cpu(id->csfo); + for (i = 0; i < 26; i++) + id->words130_155[i] = __le16_to_cpu(id->words130_155[i]); + id->word156 = __le16_to_cpu(id->word156); + for (i = 0; i < 3; i++) + id->words157_159[i] = __le16_to_cpu(id->words157_159[i]); + id->cfa_power = __le16_to_cpu(id->cfa_power); + for (i = 0; i < 14; i++) + id->words161_175[i] = __le16_to_cpu(id->words161_175[i]); + for (i = 0; i < 31; i++) + id->words176_205[i] = __le16_to_cpu(id->words176_205[i]); + for (i = 0; i < 48; i++) + id->words206_254[i] = __le16_to_cpu(id->words206_254[i]); + id->integrity_word = __le16_to_cpu(id->integrity_word); +# else +# error "Please fix <asm/byteorder.h>" +# endif +#endif +} + /************************************************************************** * isd200_get_inquiry_data @@ -1018,7 +1121,7 @@ static int isd200_get_inquiry_data( struct us_data *us ) int i; __be16 *src; __u16 *dest; - ide_fix_driveid(id); + isd200_fix_driveid(id); US_DEBUGP(" Identify Data Structure:\n"); US_DEBUGP(" config = 0x%x\n", id->config); |