summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorLiam Girdwood <lrg@slimlogic.co.uk>2008-10-10 13:22:20 +0100
committerLiam Girdwood <lrg@slimlogic.co.uk>2008-10-13 21:51:50 +0100
commita5766f11cfd3a0c03450d99c8fe548c2940be884 (patch)
treec511dd532fb20329d59c47b0f24b3ba587698319 /drivers
parenta447c0932445f92ce6f4c1bd020f62c5097a7842 (diff)
regulator: core - Rework machine API to remove string based functions.
This improves the machine level API in order to configure regulator constraints and consumers as platform data and removes the old string based API that required several calls to set up each regulator. The intention is to create a struct regulator_init_data, populate it's fields with constraints, consumers devices, etc and then register the regulator device from board.c in the standard Linux way. e.g. regulator LDO2 (supplying codec and sim) platform data. /* regulator LDO2 consumer devices */ static struct regulator_consumer_supply ldo2_consumers[] = { { .dev = &platform_audio_device.dev, .supply = "codec_avdd", }, { .dev = &platform_sim_device.dev, .supply = "sim_vcc", } }; /* regulator LDO2 constraints */ static struct regulator_init_data ldo2_data = { .constraints = { .min_uV = 3300000, .max_uV = 3300000, .valid_modes_mask = REGULATOR_MODE_NORMAL, .apply_uV = 1, }, .num_consumer_supplies = ARRAY_SIZE(ldo2_consumers), .consumer_supplies = ldo2_consumers, }; /* machine regulator devices with thier consumers and constraints */ static struct platform_device wm8350_regulator_devices[] = { { .name = "wm8350-regulator", .id = WM8350_LDO_2, .dev = { .platform_data = &ldo2_data, }, }, }; Changes in detail:- o Removed all const char* regulator config functions in machine API. o Created new struct regulator_init_data to contain regulator machine configuration constraints and consmuers. o Changed set_supply(), set_machine_constraints(), set_consumer_device_supply() to remove their string identifier parameters. Also made them static and moved functions nearer top of core.c. o Removed no longer used inline func to_rdev() o Added regulator_get_init_drvdata() to retrieve init data. o Added struct device* as parameter to regulator_register(). o Changed my email address. Signed-off-by: Eric Miao <eric.miao@marvell.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/regulator/bq24022.c21
-rw-r--r--drivers/regulator/core.c457
2 files changed, 235 insertions, 243 deletions
diff --git a/drivers/regulator/bq24022.c b/drivers/regulator/bq24022.c
index 263699d6152d..366565aba865 100644
--- a/drivers/regulator/bq24022.c
+++ b/drivers/regulator/bq24022.c
@@ -18,13 +18,13 @@
#include <linux/regulator/bq24022.h>
#include <linux/regulator/driver.h>
+
static int bq24022_set_current_limit(struct regulator_dev *rdev,
int min_uA, int max_uA)
{
- struct platform_device *pdev = rdev_get_drvdata(rdev);
- struct bq24022_mach_info *pdata = pdev->dev.platform_data;
+ struct bq24022_mach_info *pdata = rdev_get_drvdata(rdev);
- dev_dbg(&pdev->dev, "setting current limit to %s mA\n",
+ dev_dbg(rdev_get_dev(rdev), "setting current limit to %s mA\n",
max_uA >= 500000 ? "500" : "100");
/* REVISIT: maybe return error if min_uA != 0 ? */
@@ -34,18 +34,16 @@ static int bq24022_set_current_limit(struct regulator_dev *rdev,
static int bq24022_get_current_limit(struct regulator_dev *rdev)
{
- struct platform_device *pdev = rdev_get_drvdata(rdev);
- struct bq24022_mach_info *pdata = pdev->dev.platform_data;
+ struct bq24022_mach_info *pdata = rdev_get_drvdata(rdev);
return gpio_get_value(pdata->gpio_iset2) ? 500000 : 100000;
}
static int bq24022_enable(struct regulator_dev *rdev)
{
- struct platform_device *pdev = rdev_get_drvdata(rdev);
- struct bq24022_mach_info *pdata = pdev->dev.platform_data;
+ struct bq24022_mach_info *pdata = rdev_get_drvdata(rdev);
- dev_dbg(&pdev->dev, "enabling charger\n");
+ dev_dbg(rdev_get_dev(rdev), "enabling charger\n");
gpio_set_value(pdata->gpio_nce, 0);
return 0;
@@ -53,10 +51,9 @@ static int bq24022_enable(struct regulator_dev *rdev)
static int bq24022_disable(struct regulator_dev *rdev)
{
- struct platform_device *pdev = rdev_get_drvdata(rdev);
- struct bq24022_mach_info *pdata = pdev->dev.platform_data;
+ struct bq24022_mach_info *pdata = rdev_get_drvdata(rdev);
- dev_dbg(&pdev->dev, "disabling charger\n");
+ dev_dbg(rdev_get_dev(rdev), "disabling charger\n");
gpio_set_value(pdata->gpio_nce, 1);
return 0;
@@ -108,7 +105,7 @@ static int __init bq24022_probe(struct platform_device *pdev)
ret = gpio_direction_output(pdata->gpio_iset2, 0);
ret = gpio_direction_output(pdata->gpio_nce, 1);
- bq24022 = regulator_register(&bq24022_desc, pdev);
+ bq24022 = regulator_register(&bq24022_desc, &pdev->dev, pdata);
if (IS_ERR(bq24022)) {
dev_dbg(&pdev->dev, "couldn't register regulator\n");
ret = PTR_ERR(bq24022);
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 9c7986261568..84202eaace57 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -2,8 +2,9 @@
* core.c -- Voltage/Current Regulator framework.
*
* Copyright 2007, 2008 Wolfson Microelectronics PLC.
+ * Copyright 2008 SlimLogic Ltd.
*
- * Author: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
+ * Author: Liam Girdwood <lrg@slimlogic.co.uk>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -64,14 +65,9 @@ struct regulator_map {
struct list_head list;
struct device *dev;
const char *supply;
- const char *regulator;
+ struct regulator_dev *regulator;
};
-static inline struct regulator_dev *to_rdev(struct device *d)
-{
- return container_of(d, struct regulator_dev, dev);
-}
-
/*
* struct regulator
*
@@ -227,7 +223,7 @@ static ssize_t device_requested_uA_show(struct device *dev,
static ssize_t regulator_uV_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct regulator_dev *rdev = to_rdev(dev);
+ struct regulator_dev *rdev = dev_get_drvdata(dev);
ssize_t ret;
mutex_lock(&rdev->mutex);
@@ -240,7 +236,7 @@ static ssize_t regulator_uV_show(struct device *dev,
static ssize_t regulator_uA_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct regulator_dev *rdev = to_rdev(dev);
+ struct regulator_dev *rdev = dev_get_drvdata(dev);
return sprintf(buf, "%d\n", _regulator_get_current_limit(rdev));
}
@@ -248,7 +244,7 @@ static ssize_t regulator_uA_show(struct device *dev,
static ssize_t regulator_opmode_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct regulator_dev *rdev = to_rdev(dev);
+ struct regulator_dev *rdev = dev_get_drvdata(dev);
int mode = _regulator_get_mode(rdev);
switch (mode) {
@@ -267,7 +263,7 @@ static ssize_t regulator_opmode_show(struct device *dev,
static ssize_t regulator_state_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct regulator_dev *rdev = to_rdev(dev);
+ struct regulator_dev *rdev = dev_get_drvdata(dev);
int state = _regulator_is_enabled(rdev);
if (state > 0)
@@ -281,7 +277,7 @@ static ssize_t regulator_state_show(struct device *dev,
static ssize_t regulator_min_uA_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct regulator_dev *rdev = to_rdev(dev);
+ struct regulator_dev *rdev = dev_get_drvdata(dev);
if (!rdev->constraints)
return sprintf(buf, "constraint not defined\n");
@@ -292,7 +288,7 @@ static ssize_t regulator_min_uA_show(struct device *dev,
static ssize_t regulator_max_uA_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct regulator_dev *rdev = to_rdev(dev);
+ struct regulator_dev *rdev = dev_get_drvdata(dev);
if (!rdev->constraints)
return sprintf(buf, "constraint not defined\n");
@@ -303,7 +299,7 @@ static ssize_t regulator_max_uA_show(struct device *dev,
static ssize_t regulator_min_uV_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct regulator_dev *rdev = to_rdev(dev);
+ struct regulator_dev *rdev = dev_get_drvdata(dev);
if (!rdev->constraints)
return sprintf(buf, "constraint not defined\n");
@@ -314,7 +310,7 @@ static ssize_t regulator_min_uV_show(struct device *dev,
static ssize_t regulator_max_uV_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct regulator_dev *rdev = to_rdev(dev);
+ struct regulator_dev *rdev = dev_get_drvdata(dev);
if (!rdev->constraints)
return sprintf(buf, "constraint not defined\n");
@@ -325,7 +321,7 @@ static ssize_t regulator_max_uV_show(struct device *dev,
static ssize_t regulator_total_uA_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct regulator_dev *rdev = to_rdev(dev);
+ struct regulator_dev *rdev = dev_get_drvdata(dev);
struct regulator *regulator;
int uA = 0;
@@ -339,14 +335,14 @@ static ssize_t regulator_total_uA_show(struct device *dev,
static ssize_t regulator_num_users_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct regulator_dev *rdev = to_rdev(dev);
+ struct regulator_dev *rdev = dev_get_drvdata(dev);
return sprintf(buf, "%d\n", rdev->use_count);
}
static ssize_t regulator_type_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct regulator_dev *rdev = to_rdev(dev);
+ struct regulator_dev *rdev = dev_get_drvdata(dev);
switch (rdev->desc->type) {
case REGULATOR_VOLTAGE:
@@ -360,7 +356,7 @@ static ssize_t regulator_type_show(struct device *dev,
static ssize_t regulator_suspend_mem_uV_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct regulator_dev *rdev = to_rdev(dev);
+ struct regulator_dev *rdev = dev_get_drvdata(dev);
if (!rdev->constraints)
return sprintf(buf, "not defined\n");
@@ -370,7 +366,7 @@ static ssize_t regulator_suspend_mem_uV_show(struct device *dev,
static ssize_t regulator_suspend_disk_uV_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct regulator_dev *rdev = to_rdev(dev);
+ struct regulator_dev *rdev = dev_get_drvdata(dev);
if (!rdev->constraints)
return sprintf(buf, "not defined\n");
@@ -380,7 +376,7 @@ static ssize_t regulator_suspend_disk_uV_show(struct device *dev,
static ssize_t regulator_suspend_standby_uV_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct regulator_dev *rdev = to_rdev(dev);
+ struct regulator_dev *rdev = dev_get_drvdata(dev);
if (!rdev->constraints)
return sprintf(buf, "not defined\n");
@@ -406,7 +402,7 @@ static ssize_t suspend_opmode_show(struct regulator_dev *rdev,
static ssize_t regulator_suspend_mem_mode_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct regulator_dev *rdev = to_rdev(dev);
+ struct regulator_dev *rdev = dev_get_drvdata(dev);
if (!rdev->constraints)
return sprintf(buf, "not defined\n");
@@ -417,7 +413,7 @@ static ssize_t regulator_suspend_mem_mode_show(struct device *dev,
static ssize_t regulator_suspend_disk_mode_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct regulator_dev *rdev = to_rdev(dev);
+ struct regulator_dev *rdev = dev_get_drvdata(dev);
if (!rdev->constraints)
return sprintf(buf, "not defined\n");
@@ -428,7 +424,7 @@ static ssize_t regulator_suspend_disk_mode_show(struct device *dev,
static ssize_t regulator_suspend_standby_mode_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct regulator_dev *rdev = to_rdev(dev);
+ struct regulator_dev *rdev = dev_get_drvdata(dev);
if (!rdev->constraints)
return sprintf(buf, "not defined\n");
@@ -439,7 +435,7 @@ static ssize_t regulator_suspend_standby_mode_show(struct device *dev,
static ssize_t regulator_suspend_mem_state_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct regulator_dev *rdev = to_rdev(dev);
+ struct regulator_dev *rdev = dev_get_drvdata(dev);
if (!rdev->constraints)
return sprintf(buf, "not defined\n");
@@ -453,7 +449,7 @@ static ssize_t regulator_suspend_mem_state_show(struct device *dev,
static ssize_t regulator_suspend_disk_state_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct regulator_dev *rdev = to_rdev(dev);
+ struct regulator_dev *rdev = dev_get_drvdata(dev);
if (!rdev->constraints)
return sprintf(buf, "not defined\n");
@@ -467,7 +463,7 @@ static ssize_t regulator_suspend_disk_state_show(struct device *dev,
static ssize_t regulator_suspend_standby_state_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
- struct regulator_dev *rdev = to_rdev(dev);
+ struct regulator_dev *rdev = dev_get_drvdata(dev);
if (!rdev->constraints)
return sprintf(buf, "not defined\n");
@@ -512,7 +508,7 @@ static struct device_attribute regulator_dev_attrs[] = {
static void regulator_dev_release(struct device *dev)
{
- struct regulator_dev *rdev = to_rdev(dev);
+ struct regulator_dev *rdev = dev_get_drvdata(dev);
kfree(rdev);
}
@@ -569,8 +565,11 @@ static int suspend_set_state(struct regulator_dev *rdev,
/* enable & disable are mandatory for suspend control */
if (!rdev->desc->ops->set_suspend_enable ||
- !rdev->desc->ops->set_suspend_disable)
+ !rdev->desc->ops->set_suspend_disable) {
+ printk(KERN_ERR "%s: no way to set suspend state\n",
+ __func__);
return -EINVAL;
+ }
if (rstate->enabled)
ret = rdev->desc->ops->set_suspend_enable(rdev);
@@ -656,6 +655,125 @@ static void print_constraints(struct regulator_dev *rdev)
printk(KERN_INFO "regulator: %s: %s\n", rdev->desc->name, buf);
}
+/**
+ * set_machine_constraints - sets regulator constraints
+ * @regulator: regulator source
+ *
+ * Allows platform initialisation code to define and constrain
+ * regulator circuits e.g. valid voltage/current ranges, etc. NOTE:
+ * Constraints *must* be set by platform code in order for some
+ * regulator operations to proceed i.e. set_voltage, set_current_limit,
+ * set_mode.
+ */
+static int set_machine_constraints(struct regulator_dev *rdev,
+ struct regulation_constraints *constraints)
+{
+ int ret = 0;
+
+ rdev->constraints = constraints;
+
+ /* do we need to apply the constraint voltage */
+ if (rdev->constraints->apply_uV &&
+ rdev->constraints->min_uV == rdev->constraints->max_uV &&
+ rdev->desc->ops->set_voltage) {
+ ret = rdev->desc->ops->set_voltage(rdev,
+ rdev->constraints->min_uV, rdev->constraints->max_uV);
+ if (ret < 0) {
+ printk(KERN_ERR "%s: failed to apply %duV"
+ " constraint\n", __func__,
+ rdev->constraints->min_uV);
+ rdev->constraints = NULL;
+ goto out;
+ }
+ }
+
+ /* are we enabled at boot time by firmware / bootloader */
+ if (rdev->constraints->boot_on)
+ rdev->use_count = 1;
+
+ /* do we need to setup our suspend state */
+ if (constraints->initial_state)
+ ret = suspend_prepare(rdev, constraints->initial_state);
+
+ print_constraints(rdev);
+out:
+ return ret;
+}
+
+/**
+ * set_supply - set regulator supply regulator
+ * @regulator: regulator name
+ * @supply: supply regulator name
+ *
+ * Called by platform initialisation code to set the supply regulator for this
+ * regulator. This ensures that a regulators supply will also be enabled by the
+ * core if it's child is enabled.
+ */
+static int set_supply(struct regulator_dev *rdev,
+ struct regulator_dev *supply_rdev)
+{
+ int err;
+
+ err = sysfs_create_link(&rdev->dev.kobj, &supply_rdev->dev.kobj,
+ "supply");
+ if (err) {
+ printk(KERN_ERR
+ "%s: could not add device link %s err %d\n",
+ __func__, supply_rdev->dev.kobj.name, err);
+ goto out;
+ }
+ rdev->supply = supply_rdev;
+ list_add(&rdev->slist, &supply_rdev->supply_list);
+out:
+ return err;
+}
+
+/**
+ * set_consumer_device_supply: Bind a regulator to a symbolic supply
+ * @regulator: regulator source
+ * @dev: device the supply applies to
+ * @supply: symbolic name for supply
+ *
+ * Allows platform initialisation code to map physical regulator
+ * sources to symbolic names for supplies for use by devices. Devices
+ * should use these symbolic names to request regulators, avoiding the
+ * need to provide board-specific regulator names as platform data.
+ */
+static int set_consumer_device_supply(struct regulator_dev *rdev,
+ struct device *consumer_dev, const char *supply)
+{
+ struct regulator_map *node;
+
+ if (supply == NULL)
+ return -EINVAL;
+
+ node = kmalloc(sizeof(struct regulator_map), GFP_KERNEL);
+ if (node == NULL)
+ return -ENOMEM;
+
+ node->regulator = rdev;
+ node->dev = consumer_dev;
+ node->supply = supply;
+
+ list_add(&node->list, &regulator_map_list);
+ return 0;
+}
+
+static void unset_consumer_device_supply(struct regulator_dev *rdev,
+ struct device *consumer_dev)
+{
+ struct regulator_map *node, *n;
+
+ list_for_each_entry_safe(node, n, &regulator_map_list, list) {
+ if (rdev == node->regulator &&
+ consumer_dev == node->dev) {
+ list_del(&node->list);
+ kfree(node);
+ return;
+ }
+ }
+}
+
#define REG_STR_SIZE 32
static struct regulator *create_regulator(struct regulator_dev *rdev,
@@ -746,7 +864,6 @@ struct regulator *regulator_get(struct device *dev, const char *id)
struct regulator_dev *rdev;
struct regulator_map *map;
struct regulator *regulator = ERR_PTR(-ENODEV);
- const char *supply = id;
if (id == NULL) {
printk(KERN_ERR "regulator: get() with no identifier\n");
@@ -758,15 +875,9 @@ struct regulator *regulator_get(struct device *dev, const char *id)
list_for_each_entry(map, &regulator_map_list, list) {
if (dev == map->dev &&
strcmp(map->supply, id) == 0) {
- supply = map->regulator;
- break;
- }
- }
-
- list_for_each_entry(rdev, &regulator_list, list) {
- if (strcmp(supply, rdev->desc->name) == 0 &&
- try_module_get(rdev->owner))
+ rdev = map->regulator;
goto found;
+ }
}
printk(KERN_ERR "regulator: Unable to get requested regulator: %s\n",
id);
@@ -774,12 +885,16 @@ struct regulator *regulator_get(struct device *dev, const char *id)
return regulator;
found:
+ if (!try_module_get(rdev->owner))
+ goto out;
+
regulator = create_regulator(rdev, dev, id);
if (regulator == NULL) {
regulator = ERR_PTR(-ENOMEM);
module_put(rdev->owner);
}
+out:
mutex_unlock(&regulator_list_mutex);
return regulator;
}
@@ -1559,11 +1674,12 @@ EXPORT_SYMBOL_GPL(regulator_notifier_call_chain);
* Returns 0 on success.
*/
struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
- void *reg_data)
+ struct device *dev, void *driver_data)
{
static atomic_t regulator_no = ATOMIC_INIT(0);
struct regulator_dev *rdev;
- int ret;
+ struct regulator_init_data *init_data = dev->platform_data;
+ int ret, i;
if (regulator_desc == NULL)
return ERR_PTR(-EINVAL);
@@ -1582,7 +1698,7 @@ struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
mutex_lock(&regulator_list_mutex);
mutex_init(&rdev->mutex);
- rdev->reg_data = reg_data;
+ rdev->reg_data = driver_data;
rdev->owner = regulator_desc->owner;
rdev->desc = regulator_desc;
INIT_LIST_HEAD(&rdev->consumer_list);
@@ -1591,20 +1707,68 @@ struct regulator_dev *regulator_register(struct regulator_desc *regulator_desc,
INIT_LIST_HEAD(&rdev->slist);
BLOCKING_INIT_NOTIFIER_HEAD(&rdev->notifier);
+ /* preform any regulator specific init */
+ if (init_data->regulator_init) {
+ ret = init_data->regulator_init(rdev->reg_data);
+ if (ret < 0) {
+ kfree(rdev);
+ rdev = ERR_PTR(ret);
+ goto out;
+ }
+ }
+
+ /* set regulator constraints */
+ ret = set_machine_constraints(rdev, &init_data->constraints);
+ if (ret < 0) {
+ kfree(rdev);
+ rdev = ERR_PTR(ret);
+ goto out;
+ }
+
+ /* register with sysfs */
rdev->dev.class = &regulator_class;
- device_initialize(&rdev->dev);
+ rdev->dev.parent = dev;
snprintf(rdev->dev.bus_id, sizeof(rdev->dev.bus_id),
- "regulator_%ld_%s",
- (unsigned long)atomic_inc_return(&regulator_no) - 1,
- regulator_desc->name);
-
- ret = device_add(&rdev->dev);
- if (ret == 0)
- list_add(&rdev->list, &regulator_list);
- else {
+ "regulator.%d", atomic_inc_return(&regulator_no) - 1);
+ ret = device_register(&rdev->dev);
+ if (ret != 0) {
kfree(rdev);
rdev = ERR_PTR(ret);
+ goto out;
+ }
+
+ dev_set_drvdata(&rdev->dev, rdev);
+
+ /* set supply regulator if it exists */
+ if (init_data->supply_regulator_dev) {
+ ret = set_supply(rdev,
+ dev_get_drvdata(init_data->supply_regulator_dev));
+ if (ret < 0) {
+ device_unregister(&rdev->dev);
+ kfree(rdev);
+ rdev = ERR_PTR(ret);
+ goto out;
+ }
+ }
+
+ /* add consumers devices */
+ for (i = 0; i < init_data->num_consumer_supplies; i++) {
+ ret = set_consumer_device_supply(rdev,
+ init_data->consumer_supplies[i].dev,
+ init_data->consumer_supplies[i].supply);
+ if (ret < 0) {
+ for (--i; i >= 0; i--)
+ unset_consumer_device_supply(rdev,
+ init_data->consumer_supplies[i].dev);
+ device_unregister(&rdev->dev);
+ kfree(rdev);
+ rdev = ERR_PTR(ret);
+ goto out;
+ }
}
+
+ list_add(&rdev->list, &regulator_list);
+out:
mutex_unlock(&regulator_list_mutex);
return rdev;
}
@@ -1631,187 +1795,6 @@ void regulator_unregister(struct regulator_dev *rdev)
EXPORT_SYMBOL_GPL(regulator_unregister);
/**
- * regulator_set_supply - set regulator supply regulator
- * @regulator: regulator name
- * @supply: supply regulator name
- *
- * Called by platform initialisation code to set the supply regulator for this
- * regulator. This ensures that a regulators supply will also be enabled by the
- * core if it's child is enabled.
- */
-int regulator_set_supply(const char *regulator, const char *supply)
-{
- struct regulator_dev *rdev, *supply_rdev;
- int err;
-
- if (regulator == NULL || supply == NULL)
- return -EINVAL;
-
- mutex_lock(&regulator_list_mutex);
-
- list_for_each_entry(rdev, &regulator_list, list) {
- if (!strcmp(rdev->desc->name, regulator))
- goto found_regulator;
- }
- mutex_unlock(&regulator_list_mutex);
- return -ENODEV;
-
-found_regulator:
- list_for_each_entry(supply_rdev, &regulator_list, list) {
- if (!strcmp(supply_rdev->desc->name, supply))
- goto found_supply;
- }
- mutex_unlock(&regulator_list_mutex);
- return -ENODEV;
-
-found_supply:
- err = sysfs_create_link(&rdev->dev.kobj, &supply_rdev->dev.kobj,
- "supply");
- if (err) {
- printk(KERN_ERR
- "%s: could not add device link %s err %d\n",
- __func__, supply_rdev->dev.kobj.name, err);
- goto out;
- }
- rdev->supply = supply_rdev;
- list_add(&rdev->slist, &supply_rdev->supply_list);
-out:
- mutex_unlock(&regulator_list_mutex);
- return err;
-}
-EXPORT_SYMBOL_GPL(regulator_set_supply);
-
-/**
- * regulator_get_supply - get regulator supply regulator
- * @regulator: regulator name
- *
- * Returns the supply supply regulator name or NULL if no supply regulator
- * exists (i.e the regulator is supplied directly from USB, Line, Battery, etc)
- */
-const char *regulator_get_supply(const char *regulator)
-{
- struct regulator_dev *rdev;
-
- if (regulator == NULL)
- return NULL;
-
- mutex_lock(&regulator_list_mutex);
- list_for_each_entry(rdev, &regulator_list, list) {
- if (!strcmp(rdev->desc->name, regulator))
- goto found;
- }
- mutex_unlock(&regulator_list_mutex);
- return NULL;
-
-found:
- mutex_unlock(&regulator_list_mutex);
- if (rdev->supply)
- return rdev->supply->desc->name;
- else
- return NULL;
-}
-EXPORT_SYMBOL_GPL(regulator_get_supply);
-
-/**
- * regulator_set_machine_constraints - sets regulator constraints
- * @regulator: regulator source
- *
- * Allows platform initialisation code to define and constrain
- * regulator circuits e.g. valid voltage/current ranges, etc. NOTE:
- * Constraints *must* be set by platform code in order for some
- * regulator operations to proceed i.e. set_voltage, set_current_limit,
- * set_mode.
- */
-int regulator_set_machine_constraints(const char *regulator_name,
- struct regulation_constraints *constraints)
-{
- struct regulator_dev *rdev;
- int ret = 0;
-
- if (regulator_name == NULL)
- return -EINVAL;
-
- mutex_lock(&regulator_list_mutex);
-
- list_for_each_entry(rdev, &regulator_list, list) {
- if (!strcmp(regulator_name, rdev->desc->name))
- goto found;
- }
- ret = -ENODEV;
- goto out;
-
-found:
- mutex_lock(&rdev->mutex);
- rdev->constraints = constraints;
-
- /* do we need to apply the constraint voltage */
- if (rdev->constraints->apply_uV &&
- rdev->constraints->min_uV == rdev->constraints->max_uV &&
- rdev->desc->ops->set_voltage) {
- ret = rdev->desc->ops->set_voltage(rdev,
- rdev->constraints->min_uV, rdev->constraints->max_uV);
- if (ret < 0) {
- printk(KERN_ERR "%s: failed to apply %duV"
- " constraint\n", __func__,
- rdev->constraints->min_uV);
- rdev->constraints = NULL;
- goto out;
- }
- }
-
- /* are we enabled at boot time by firmware / bootloader */
- if (rdev->constraints->boot_on)
- rdev->use_count = 1;
-
- /* do we need to setup our suspend state */
- if (constraints->initial_state)
- ret = suspend_prepare(rdev, constraints->initial_state);
-
- print_constraints(rdev);
- mutex_unlock(&rdev->mutex);
-
-out:
- mutex_unlock(&regulator_list_mutex);
- return ret;
-}
-EXPORT_SYMBOL_GPL(regulator_set_machine_constraints);
-
-
-/**
- * regulator_set_device_supply: Bind a regulator to a symbolic supply
- * @regulator: regulator source
- * @dev: device the supply applies to
- * @supply: symbolic name for supply
- *
- * Allows platform initialisation code to map physical regulator
- * sources to symbolic names for supplies for use by devices. Devices
- * should use these symbolic names to request regulators, avoiding the
- * need to provide board-specific regulator names as platform data.
- */
-int regulator_set_device_supply(const char *regulator, struct device *dev,
- const char *supply)
-{
- struct regulator_map *node;
-
- if (regulator == NULL || supply == NULL)
- return -EINVAL;
-
- node = kmalloc(sizeof(struct regulator_map), GFP_KERNEL);
- if (node == NULL)
- return -ENOMEM;
-
- node->regulator = regulator;
- node->dev = dev;
- node->supply = supply;
-
- mutex_lock(&regulator_list_mutex);
- list_add(&node->list, &regulator_map_list);
- mutex_unlock(&regulator_list_mutex);
- return 0;
-}
-EXPORT_SYMBOL_GPL(regulator_set_device_supply);
-
-/**
* regulator_suspend_prepare: prepare regulators for system wide suspend
* @state: system suspend state
*
@@ -1893,6 +1876,18 @@ int rdev_get_id(struct regulator_dev *rdev)
}
EXPORT_SYMBOL_GPL(rdev_get_id);
+struct device *rdev_get_dev(struct regulator_dev *rdev)
+{
+ return &rdev->dev;
+}
+EXPORT_SYMBOL_GPL(rdev_get_dev);
+
+void *regulator_get_init_drvdata(struct regulator_init_data *reg_init_data)
+{
+ return reg_init_data->driver_data;
+}
+EXPORT_SYMBOL_GPL(regulator_get_init_drvdata);
+
static int __init regulator_init(void)
{
printk(KERN_INFO "regulator: core version %s\n", REGULATOR_VERSION);