summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra-mc.txt
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2015-06-26 11:54:29 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2015-06-26 11:54:29 -0700
commitf5dcb68086ba2e033b2af32b0da0c7a7c7872a09 (patch)
tree89c41089b492f8d8d411185bd7cb07538802e837 /Documentation/devicetree/bindings/memory-controllers/nvidia,tegra-mc.txt
parent3d9f96d850e4bbfae24dc9aee03033dd77c81596 (diff)
parent4af34b572a85c44c55491a10693535a79627c478 (diff)
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Kevin Hilman: "Some of these are for drivers/soc, where we're now putting SoC-specific drivers these days. Some are for other driver subsystems where we have received acks from the appropriate maintainers. Some highlights: - simple-mfd: document DT bindings and misc updates - migrate mach-berlin to simple-mfd for clock, pinctrl and reset - memory: support for Tegra132 SoC - memory: introduce tegra EMC driver for scaling memory frequency - misc. updates for ARM CCI and CCN busses" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits) drivers: soc: sunxi: Introduce SoC driver to map SRAMs arm-cci: Add aliases for PMU events arm-cci: Add CCI-500 PMU support arm-cci: Sanitise CCI400 PMU driver specific code arm-cci: Abstract handling for CCI events arm-cci: Abstract out the PMU counter details arm-cci: Cleanup PMU driver code arm-cci: Do not enable CCI-400 PMU by default firmware: qcom: scm: Add HDCP Support ARM: berlin: add an ADC node for the BG2Q ARM: berlin: remove useless chip and system ctrl compatibles clk: berlin: drop direct of_iomap of nodes reg property ARM: berlin: move BG2Q clock node ARM: berlin: move BG2CD clock node ARM: berlin: move BG2 clock node clk: berlin: prepare simple-mfd conversion pinctrl: berlin: drop SoC stub provided regmap ARM: berlin: move pinctrl to simple-mfd nodes pinctrl: berlin: prepare to use regmap provided by syscon reset: berlin: drop arch_initcall initialization ...
Diffstat (limited to 'Documentation/devicetree/bindings/memory-controllers/nvidia,tegra-mc.txt')
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/nvidia,tegra-mc.txt84
1 files changed, 82 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra-mc.txt b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra-mc.txt
index f3db93c85eea..3338a2834ad7 100644
--- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra-mc.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra-mc.txt
@@ -1,6 +1,9 @@
NVIDIA Tegra Memory Controller device tree bindings
===================================================
+memory-controller node
+----------------------
+
Required properties:
- compatible: Should be "nvidia,tegra<chip>-mc"
- reg: Physical base address and length of the controller's registers.
@@ -15,9 +18,49 @@ Required properties:
This device implements an IOMMU that complies with the generic IOMMU binding.
See ../iommu/iommu.txt for details.
-Example:
---------
+emc-timings subnode
+-------------------
+
+The node should contain a "emc-timings" subnode for each supported RAM type (see field RAM_CODE in
+register PMC_STRAPPING_OPT_A).
+
+Required properties for "emc-timings" nodes :
+- nvidia,ram-code : Should contain the value of RAM_CODE this timing set is used for.
+
+timing subnode
+--------------
+
+Each "emc-timings" node should contain a subnode for every supported EMC clock rate.
+
+Required properties for timing nodes :
+- clock-frequency : Should contain the memory clock rate in Hz.
+- nvidia,emem-configuration : Values to be written to the EMEM register block. For the Tegra124 SoC
+(see section "15.6.1 MC Registers" in the TRM), these are the registers whose values need to be
+specified, according to the board documentation:
+
+ MC_EMEM_ARB_CFG
+ MC_EMEM_ARB_OUTSTANDING_REQ
+ MC_EMEM_ARB_TIMING_RCD
+ MC_EMEM_ARB_TIMING_RP
+ MC_EMEM_ARB_TIMING_RC
+ MC_EMEM_ARB_TIMING_RAS
+ MC_EMEM_ARB_TIMING_FAW
+ MC_EMEM_ARB_TIMING_RRD
+ MC_EMEM_ARB_TIMING_RAP2PRE
+ MC_EMEM_ARB_TIMING_WAP2PRE
+ MC_EMEM_ARB_TIMING_R2R
+ MC_EMEM_ARB_TIMING_W2W
+ MC_EMEM_ARB_TIMING_R2W
+ MC_EMEM_ARB_TIMING_W2R
+ MC_EMEM_ARB_DA_TURNS
+ MC_EMEM_ARB_DA_COVERS
+ MC_EMEM_ARB_MISC0
+ MC_EMEM_ARB_MISC1
+ MC_EMEM_ARB_RING1_THROTTLE
+Example SoC include file:
+
+/ {
mc: memory-controller@0,70019000 {
compatible = "nvidia,tegra124-mc";
reg = <0x0 0x70019000 0x0 0x1000>;
@@ -34,3 +77,40 @@ Example:
...
iommus = <&mc TEGRA_SWGROUP_SDMMC1A>;
};
+};
+
+Example board file:
+
+/ {
+ memory-controller@0,70019000 {
+ emc-timings-3 {
+ nvidia,ram-code = <3>;
+
+ timing-12750000 {
+ clock-frequency = <12750000>;
+
+ nvidia,emem-configuration = <
+ 0x40040001 /* MC_EMEM_ARB_CFG */
+ 0x8000000a /* MC_EMEM_ARB_OUTSTANDING_REQ */
+ 0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+ 0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+ 0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+ 0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+ 0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+ 0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+ 0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+ 0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+ 0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+ 0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+ 0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+ 0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+ 0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+ 0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
+ 0x77e30303 /* MC_EMEM_ARB_MISC0 */
+ 0x70000f03 /* MC_EMEM_ARB_MISC1 */
+ 0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+ >;
+ };
+ };
+ };
+};