From a8729eb302a5b5da8b0b4d29582c42648a2e0f12 Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Tue, 7 Apr 2009 02:01:42 +0000 Subject: phylib: Allow early-out in phy_change Marvell 88E1121R Dual PHY device can be hardware-configured to use shared interrupt pin for both PHY ports. For such PHY configurations using shared PHY interrupt phy_interrupt() handler will also schedule a work for PHY port which didn't cause an interrupt. This patch adds a possibility for PHY drivers to provide did_interrupt() function which reports if the PHY (or a PHY port in a multi-PHY device) generated an interrupt. This function is called in phy_change() as phy_change() shouldn't proceed if it is invoked for a PHY which didn't cause an interrupt. So check for interrupt originator in phy_change() to allow early-out. Signed-off-by: Anatolij Gustschin Signed-off-by: David S. Miller --- include/linux/phy.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux/phy.h') diff --git a/include/linux/phy.h b/include/linux/phy.h index 32cf14a4b034..97e40cb6b588 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -388,6 +388,12 @@ struct phy_driver { /* Enables or disables interrupts */ int (*config_intr)(struct phy_device *phydev); + /* + * Checks if the PHY generated an interrupt. + * For multi-PHY devices with shared PHY interrupt pin + */ + int (*did_interrupt)(struct phy_device *phydev); + /* Clears up any memory if needed */ void (*remove)(struct phy_device *phydev); -- cgit v1.2.3