From 073adf4fa7f91a91f64a88af278a5d2b075c1e83 Mon Sep 17 00:00:00 2001 From: Barry Song Date: Sun, 4 Sep 2011 22:15:16 -0700 Subject: ARM: CSR: add lost Resource Sharing Control(RSC) node in dts Signed-off-by: Barry Song --- arch/arm/boot/dts/prima2-cb.dts | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/boot/dts/prima2-cb.dts b/arch/arm/boot/dts/prima2-cb.dts index 6fecc88065b2..a0a423d1d573 100644 --- a/arch/arm/boot/dts/prima2-cb.dts +++ b/arch/arm/boot/dts/prima2-cb.dts @@ -67,6 +67,11 @@ compatible = "sirf,prima2-rstc"; reg = <0x88010000 0x1000>; }; + + rsc-controller@88020000 { + compatible = "sirf,prima2-rsc"; + reg = <0x88020000 0x1000>; + }; }; mem-iobg { -- cgit v1.2.3 From c915bedf221ad4f017710865fc963b1e0dda1390 Mon Sep 17 00:00:00 2001 From: Barry Song Date: Sun, 4 Sep 2011 22:15:17 -0700 Subject: ARM: CSR: extend the compatibility of gpio controller to pinmux in dts gpio controller handles the switch of gpio and pinmux. And drivers/pinctrl/pinmux-sirf.c will contain both gpio and pinmux. Cc: Linus Walleij Signed-off-by: Barry Song --- arch/arm/boot/dts/prima2-cb.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/prima2-cb.dts b/arch/arm/boot/dts/prima2-cb.dts index a0a423d1d573..af86931bdcc6 100644 --- a/arch/arm/boot/dts/prima2-cb.dts +++ b/arch/arm/boot/dts/prima2-cb.dts @@ -279,7 +279,7 @@ gpio: gpio-controller@b0120000 { #gpio-cells = <2>; #interrupt-cells = <2>; - compatible = "sirf,prima2-gpio"; + compatible = "sirf,prima2-gpio-pinmux"; reg = <0xb0120000 0x10000>; gpio-controller; interrupt-controller; -- cgit v1.2.3 From 858ba703e842f4ece6680b45862ee9e6e6297d1e Mon Sep 17 00:00:00 2001 From: Barry Song Date: Sun, 4 Sep 2011 22:15:18 -0700 Subject: ARM: CSR: IRQ: add simple irq_domain so that hw irq can map to Linux Signed-off-by: Barry Song --- arch/arm/mach-prima2/irq.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/mach-prima2/irq.c b/arch/arm/mach-prima2/irq.c index 7af254d046ba..cf80a72c0a09 100644 --- a/arch/arm/mach-prima2/irq.c +++ b/arch/arm/mach-prima2/irq.c @@ -13,6 +13,7 @@ #include #include #include +#include #define SIRFSOC_INT_RISC_MASK0 0x0018 #define SIRFSOC_INT_RISC_MASK1 0x001C @@ -66,6 +67,8 @@ void __init sirfsoc_of_irq_init(void) if (!sirfsoc_intc_base) panic("unable to map intc cpu registers\n"); + irq_domain_add_simple(np, 0); + of_node_put(np); sirfsoc_irq_init(); -- cgit v1.2.3 From 684f741446f7a3108b4c167faf20214c42b7eeac Mon Sep 17 00:00:00 2001 From: Zhiwu Song Date: Tue, 30 Aug 2011 19:20:34 -0700 Subject: ARM: CSR: add rtc i/o bridge interface for SiRFprimaII The module is a bridge between the RTC clock domain and the CPU interface clock domain. ARM access the register of SYSRTC, GPSRTC and PWRC through this module. Signed-off-by: Zhiwu Song Signed-off-by: Barry Song Reviewed-by: Jamie Iles Acked-by: Arnd Bergmann --- arch/arm/boot/dts/prima2-cb.dts | 2 +- arch/arm/mach-prima2/Makefile | 1 + arch/arm/mach-prima2/rtciobrg.c | 139 +++++++++++++++++++++++++++++++++++ include/linux/rtc/sirfsoc_rtciobrg.h | 18 +++++ 4 files changed, 159 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-prima2/rtciobrg.c create mode 100644 include/linux/rtc/sirfsoc_rtciobrg.h diff --git a/arch/arm/boot/dts/prima2-cb.dts b/arch/arm/boot/dts/prima2-cb.dts index af86931bdcc6..17b6737c4ee5 100644 --- a/arch/arm/boot/dts/prima2-cb.dts +++ b/arch/arm/boot/dts/prima2-cb.dts @@ -363,7 +363,7 @@ }; rtc-iobg { - compatible = "sirf,prima2-rtciobg", "simple-bus"; + compatible = "sirf,prima2-rtciobg", "sirf-prima2-rtciobg-bus"; #address-cells = <1>; #size-cells = <1>; reg = <0x80030000 0x10000>; diff --git a/arch/arm/mach-prima2/Makefile b/arch/arm/mach-prima2/Makefile index 7af7fc05d565..f49d70b86854 100644 --- a/arch/arm/mach-prima2/Makefile +++ b/arch/arm/mach-prima2/Makefile @@ -3,5 +3,6 @@ obj-y += irq.o obj-y += clock.o obj-y += rstc.o obj-y += prima2.o +obj-y += rtciobrg.o obj-$(CONFIG_DEBUG_LL) += lluart.o obj-$(CONFIG_CACHE_L2X0) += l2x0.o diff --git a/arch/arm/mach-prima2/rtciobrg.c b/arch/arm/mach-prima2/rtciobrg.c new file mode 100644 index 000000000000..9d80f1e20a98 --- /dev/null +++ b/arch/arm/mach-prima2/rtciobrg.c @@ -0,0 +1,139 @@ +/* + * RTC I/O Bridge interfaces for CSR SiRFprimaII + * ARM access the registers of SYSRTC, GPSRTC and PWRC through this module + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#include +#include +#include +#include +#include +#include +#include + +#define SIRFSOC_CPUIOBRG_CTRL 0x00 +#define SIRFSOC_CPUIOBRG_WRBE 0x04 +#define SIRFSOC_CPUIOBRG_ADDR 0x08 +#define SIRFSOC_CPUIOBRG_DATA 0x0c + +/* + * suspend asm codes will access this address to make system deepsleep + * after DRAM becomes self-refresh + */ +void __iomem *sirfsoc_rtciobrg_base; +static DEFINE_SPINLOCK(rtciobrg_lock); + +/* + * symbols without lock are only used by suspend asm codes + * and these symbols are not exported too + */ +void sirfsoc_rtc_iobrg_wait_sync(void) +{ + while (readl_relaxed(sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_CTRL)) + cpu_relax(); +} + +void sirfsoc_rtc_iobrg_besyncing(void) +{ + unsigned long flags; + + spin_lock_irqsave(&rtciobrg_lock, flags); + + sirfsoc_rtc_iobrg_wait_sync(); + + spin_unlock_irqrestore(&rtciobrg_lock, flags); +} +EXPORT_SYMBOL_GPL(sirfsoc_rtc_iobrg_besyncing); + +u32 __sirfsoc_rtc_iobrg_readl(u32 addr) +{ + sirfsoc_rtc_iobrg_wait_sync(); + + writel_relaxed(0x00, sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_WRBE); + writel_relaxed(addr, sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_ADDR); + writel_relaxed(0x01, sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_CTRL); + + sirfsoc_rtc_iobrg_wait_sync(); + + return readl_relaxed(sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_DATA); +} + +u32 sirfsoc_rtc_iobrg_readl(u32 addr) +{ + unsigned long flags, val; + + spin_lock_irqsave(&rtciobrg_lock, flags); + + val = __sirfsoc_rtc_iobrg_readl(addr); + + spin_unlock_irqrestore(&rtciobrg_lock, flags); + + return val; +} +EXPORT_SYMBOL_GPL(sirfsoc_rtc_iobrg_readl); + +void sirfsoc_rtc_iobrg_pre_writel(u32 val, u32 addr) +{ + sirfsoc_rtc_iobrg_wait_sync(); + + writel_relaxed(0xf1, sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_WRBE); + writel_relaxed(addr, sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_ADDR); + + writel_relaxed(val, sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_DATA); +} + +void sirfsoc_rtc_iobrg_writel(u32 val, u32 addr) +{ + unsigned long flags; + + spin_lock_irqsave(&rtciobrg_lock, flags); + + sirfsoc_rtc_iobrg_pre_writel(val, addr); + + writel_relaxed(0x01, sirfsoc_rtciobrg_base + SIRFSOC_CPUIOBRG_CTRL); + + sirfsoc_rtc_iobrg_wait_sync(); + + spin_unlock_irqrestore(&rtciobrg_lock, flags); +} +EXPORT_SYMBOL_GPL(sirfsoc_rtc_iobrg_writel); + +static const struct of_device_id rtciobrg_ids[] = { + { .compatible = "sirf,prima2-rtciobg" }, + {} +}; + +static int __devinit sirfsoc_rtciobrg_probe(struct platform_device *op) +{ + struct device_node *np = op->dev.of_node; + + sirfsoc_rtciobrg_base = of_iomap(np, 0); + if (!sirfsoc_rtciobrg_base) + panic("unable to map rtc iobrg registers\n"); + + return 0; +} + +static struct platform_driver sirfsoc_rtciobrg_driver = { + .probe = sirfsoc_rtciobrg_probe, + .driver = { + .name = "sirfsoc-rtciobrg", + .owner = THIS_MODULE, + .of_match_table = rtciobrg_ids, + }, +}; + +static int __init sirfsoc_rtciobrg_init(void) +{ + return platform_driver_register(&sirfsoc_rtciobrg_driver); +} +postcore_initcall(sirfsoc_rtciobrg_init); + +MODULE_AUTHOR("Zhiwu Song , " + "Barry Song "); +MODULE_DESCRIPTION("CSR SiRFprimaII rtc io bridge"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/rtc/sirfsoc_rtciobrg.h b/include/linux/rtc/sirfsoc_rtciobrg.h new file mode 100644 index 000000000000..2c92e1c8e055 --- /dev/null +++ b/include/linux/rtc/sirfsoc_rtciobrg.h @@ -0,0 +1,18 @@ +/* + * RTC I/O Bridge interfaces for CSR SiRFprimaII + * ARM access the registers of SYSRTC, GPSRTC and PWRC through this module + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ +#ifndef _SIRFSOC_RTC_IOBRG_H_ +#define _SIRFSOC_RTC_IOBRG_H_ + +extern void sirfsoc_rtc_iobrg_besyncing(void); + +extern u32 sirfsoc_rtc_iobrg_readl(u32 addr); + +extern void sirfsoc_rtc_iobrg_writel(u32 val, u32 addr); + +#endif -- cgit v1.2.3 From fa17f20f686a90004a8af403e24cc8443e8144f3 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 16 Mar 2011 11:02:59 -0700 Subject: OMAP2+: hwmod: remove unused voltagedomain pointer The voltage domain pointer currently in struct omap_hwmod is not used and does not belong here. Instead, voltage domains will be associated with powerdomains in forthcoming patches. Acked-by: Paul Walmsley Signed-off-by: Kevin Hilman --- arch/arm/plat-omap/include/plat/omap_hwmod.h | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index 0e329ca88a70..38ac4af4d1be 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -526,7 +526,6 @@ struct omap_hwmod { char *clkdm_name; struct clockdomain *clkdm; char *vdd_name; - struct voltagedomain *voltdm; struct omap_hwmod_ocp_if **masters; /* connect to *_IA */ struct omap_hwmod_ocp_if **slaves; /* connect to *_TA */ void *dev_attr; -- cgit v1.2.3 From a7460daf15239563b3e7bb862580f90da78541bd Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 16 Mar 2011 13:35:22 -0700 Subject: OMAP2+: voltage: move PRCM mod offets into VC/VP structures Eliminate need for global variables for the various PRM module offsets by making them part of the VP/VC common structures Eventually, these will likely be moved again, or more likely removed when VP/VC code is isolated, but for now just getting rid of them as global variabes so that the voltage domain initialization can be cleaned up. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/vc.h | 2 + arch/arm/mach-omap2/vc3xxx_data.c | 1 + arch/arm/mach-omap2/vc44xx_data.c | 1 + arch/arm/mach-omap2/voltage.c | 109 ++++++++++++-------------- arch/arm/mach-omap2/voltage.h | 6 +- arch/arm/mach-omap2/voltagedomains3xxx_data.c | 8 +- arch/arm/mach-omap2/voltagedomains44xx_data.c | 9 +-- arch/arm/mach-omap2/vp.h | 2 + arch/arm/mach-omap2/vp3xxx_data.c | 1 + arch/arm/mach-omap2/vp44xx_data.c | 1 + 10 files changed, 70 insertions(+), 70 deletions(-) diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h index e7767771de49..f7338af13d0b 100644 --- a/arch/arm/mach-omap2/vc.h +++ b/arch/arm/mach-omap2/vc.h @@ -23,6 +23,7 @@ * struct omap_vc_common_data - per-VC register/bitfield data * @cmd_on_mask: ON bitmask in PRM_VC_CMD_VAL* register * @valid: VALID bitmask in PRM_VC_BYPASS_VAL register + * @prm_mod: PRM module id used for PRM register access * @smps_sa_reg: Offset of PRM_VC_SMPS_SA reg from PRM start * @smps_volra_reg: Offset of PRM_VC_SMPS_VOL_RA reg from PRM start * @bypass_val_reg: Offset of PRM_VC_BYPASS_VAL reg from PRM start @@ -40,6 +41,7 @@ struct omap_vc_common_data { u32 cmd_on_mask; u32 valid; + s16 prm_mod; u8 smps_sa_reg; u8 smps_volra_reg; u8 bypass_val_reg; diff --git a/arch/arm/mach-omap2/vc3xxx_data.c b/arch/arm/mach-omap2/vc3xxx_data.c index f37dc4bc379a..55caccb2908d 100644 --- a/arch/arm/mach-omap2/vc3xxx_data.c +++ b/arch/arm/mach-omap2/vc3xxx_data.c @@ -30,6 +30,7 @@ * XXX This stuff presumably belongs in the vc3xxx.c or vc.c file. */ static struct omap_vc_common_data omap3_vc_common = { + .prm_mod = OMAP3430_GR_MOD, .smps_sa_reg = OMAP3_PRM_VC_SMPS_SA_OFFSET, .smps_volra_reg = OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET, .bypass_val_reg = OMAP3_PRM_VC_BYPASS_VAL_OFFSET, diff --git a/arch/arm/mach-omap2/vc44xx_data.c b/arch/arm/mach-omap2/vc44xx_data.c index a98da8ddec52..b62678e12a3c 100644 --- a/arch/arm/mach-omap2/vc44xx_data.c +++ b/arch/arm/mach-omap2/vc44xx_data.c @@ -31,6 +31,7 @@ * XXX This stuff presumably belongs in the vc3xxx.c or vc.c file. */ static const struct omap_vc_common_data omap4_vc_common = { + .prm_mod = OMAP4430_PRM_DEVICE_INST, .smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET, .smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET, .bypass_val_reg = OMAP4_PRM_VC_VAL_BYPASS_OFFSET, diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index 9ef3789ded4b..3151d7525f89 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -50,10 +50,6 @@ static struct omap_vdd_info **vdd_info; */ static int nr_scalable_vdd; -/* XXX document */ -static s16 prm_mod_offs; -static s16 prm_irqst_ocp_mod_offs; - static struct dentry *voltage_dir; /* Init function pointers */ @@ -147,7 +143,7 @@ static int vp_volt_debug_get(void *data, u64 *val) return -EINVAL; } - vsel = vdd->read_reg(prm_mod_offs, vdd->vp_data->voltage); + vsel = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->voltage); if (!vdd->pmic_info->vsel_to_uv) { pr_warning("PMIC function to convert vsel to voltage" @@ -197,19 +193,19 @@ static void vp_latch_vsel(struct omap_vdd_info *vdd) vsel = vdd->pmic_info->uv_to_vsel(uvdc); - vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig); + vpconfig = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig); vpconfig &= ~(vdd->vp_data->vp_common->vpconfig_initvoltage_mask | vdd->vp_data->vp_common->vpconfig_initvdd); vpconfig |= vsel << vdd->vp_data->vp_common->vpconfig_initvoltage_shift; - vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig); + vdd->write_reg(vpconfig, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig); /* Trigger initVDD value copy to voltage processor */ vdd->write_reg((vpconfig | vdd->vp_data->vp_common->vpconfig_initvdd), - prm_mod_offs, vdd->vp_data->vpconfig); + vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig); /* Clear initVDD copy trigger bit */ - vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig); + vdd->write_reg(vpconfig, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig); } /* Generic voltage init functions */ @@ -227,19 +223,19 @@ static void __init vp_init(struct omap_vdd_info *vdd) (vdd->vp_rt_data.vpconfig_errorgain << vdd->vp_data->vp_common->vpconfig_errorgain_shift) | vdd->vp_data->vp_common->vpconfig_timeouten; - vdd->write_reg(vp_val, prm_mod_offs, vdd->vp_data->vpconfig); + vdd->write_reg(vp_val, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig); vp_val = ((vdd->vp_rt_data.vstepmin_smpswaittimemin << vdd->vp_data->vp_common->vstepmin_smpswaittimemin_shift) | (vdd->vp_rt_data.vstepmin_stepmin << vdd->vp_data->vp_common->vstepmin_stepmin_shift)); - vdd->write_reg(vp_val, prm_mod_offs, vdd->vp_data->vstepmin); + vdd->write_reg(vp_val, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vstepmin); vp_val = ((vdd->vp_rt_data.vstepmax_smpswaittimemax << vdd->vp_data->vp_common->vstepmax_smpswaittimemax_shift) | (vdd->vp_rt_data.vstepmax_stepmax << vdd->vp_data->vp_common->vstepmax_stepmax_shift)); - vdd->write_reg(vp_val, prm_mod_offs, vdd->vp_data->vstepmax); + vdd->write_reg(vp_val, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vstepmax); vp_val = ((vdd->vp_rt_data.vlimitto_vddmax << vdd->vp_data->vp_common->vlimitto_vddmax_shift) | @@ -247,7 +243,7 @@ static void __init vp_init(struct omap_vdd_info *vdd) vdd->vp_data->vp_common->vlimitto_vddmin_shift) | (vdd->vp_rt_data.vlimitto_timeout << vdd->vp_data->vp_common->vlimitto_timeout_shift)); - vdd->write_reg(vp_val, prm_mod_offs, vdd->vp_data->vlimitto); + vdd->write_reg(vp_val, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vlimitto); } static void __init vdd_debugfs_init(struct omap_vdd_info *vdd) @@ -336,23 +332,23 @@ static int _pre_volt_scale(struct omap_vdd_info *vdd, volt_data = NULL; *target_vsel = vdd->pmic_info->uv_to_vsel(target_volt); - *current_vsel = vdd->read_reg(prm_mod_offs, vdd->vp_data->voltage); + *current_vsel = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->voltage); /* Setting the ON voltage to the new target voltage */ - vc_cmdval = vdd->read_reg(prm_mod_offs, vdd->vc_data->cmdval_reg); + vc_cmdval = vdd->read_reg(vdd->vc_data->vc_common->prm_mod, vdd->vc_data->cmdval_reg); vc_cmdval &= ~vc_common->cmd_on_mask; vc_cmdval |= (*target_vsel << vc_common->cmd_on_shift); - vdd->write_reg(vc_cmdval, prm_mod_offs, vdd->vc_data->cmdval_reg); + vdd->write_reg(vc_cmdval, vdd->vc_data->vc_common->prm_mod, vdd->vc_data->cmdval_reg); /* Setting vp errorgain based on the voltage */ if (volt_data) { - vp_errgain_val = vdd->read_reg(prm_mod_offs, + vp_errgain_val = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig); vdd->vp_rt_data.vpconfig_errorgain = volt_data->vp_errgain; vp_errgain_val &= ~vp_common->vpconfig_errorgain_mask; vp_errgain_val |= vdd->vp_rt_data.vpconfig_errorgain << vp_common->vpconfig_errorgain_shift; - vdd->write_reg(vp_errgain_val, prm_mod_offs, + vdd->write_reg(vp_errgain_val, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig); } @@ -394,11 +390,11 @@ static int vc_bypass_scale_voltage(struct omap_vdd_info *vdd, (vdd->pmic_info->i2c_slave_addr << vdd->vc_data->vc_common->slaveaddr_shift); - vdd->write_reg(vc_bypass_value, prm_mod_offs, vc_bypass_val_reg); - vdd->write_reg(vc_bypass_value | vc_valid, prm_mod_offs, + vdd->write_reg(vc_bypass_value, vdd->vc_data->vc_common->prm_mod, vc_bypass_val_reg); + vdd->write_reg(vc_bypass_value | vc_valid, vdd->vc_data->vc_common->prm_mod, vc_bypass_val_reg); - vc_bypass_value = vdd->read_reg(prm_mod_offs, vc_bypass_val_reg); + vc_bypass_value = vdd->read_reg(vdd->vc_data->vc_common->prm_mod, vc_bypass_val_reg); /* * Loop till the bypass command is acknowledged from the SMPS. * NOTE: This is legacy code. The loop count and retry count needs @@ -417,7 +413,7 @@ static int vc_bypass_scale_voltage(struct omap_vdd_info *vdd, loop_cnt = 0; udelay(10); } - vc_bypass_value = vdd->read_reg(prm_mod_offs, + vc_bypass_value = vdd->read_reg(vdd->vc_data->vc_common->prm_mod, vc_bypass_val_reg); } @@ -445,8 +441,8 @@ static int vp_forceupdate_scale_voltage(struct omap_vdd_info *vdd, */ while (timeout++ < VP_TRANXDONE_TIMEOUT) { vdd->write_reg(vdd->vp_data->prm_irqst_data->tranxdone_status, - prm_irqst_ocp_mod_offs, prm_irqst_reg); - if (!(vdd->read_reg(prm_irqst_ocp_mod_offs, prm_irqst_reg) & + vdd->prm_irqst_mod, prm_irqst_reg); + if (!(vdd->read_reg(vdd->prm_irqst_mod, prm_irqst_reg) & vdd->vp_data->prm_irqst_data->tranxdone_status)) break; udelay(1); @@ -458,28 +454,28 @@ static int vp_forceupdate_scale_voltage(struct omap_vdd_info *vdd, } /* Configure for VP-Force Update */ - vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig); + vpconfig = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig); vpconfig &= ~(vdd->vp_data->vp_common->vpconfig_initvdd | vdd->vp_data->vp_common->vpconfig_forceupdate | vdd->vp_data->vp_common->vpconfig_initvoltage_mask); vpconfig |= ((target_vsel << vdd->vp_data->vp_common->vpconfig_initvoltage_shift)); - vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig); + vdd->write_reg(vpconfig, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig); /* Trigger initVDD value copy to voltage processor */ vpconfig |= vdd->vp_data->vp_common->vpconfig_initvdd; - vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig); + vdd->write_reg(vpconfig, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig); /* Force update of voltage */ vpconfig |= vdd->vp_data->vp_common->vpconfig_forceupdate; - vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig); + vdd->write_reg(vpconfig, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig); /* * Wait for TransactionDone. Typical latency is <200us. * Depends on SMPSWAITTIMEMIN/MAX and voltage change */ timeout = 0; - omap_test_timeout((vdd->read_reg(prm_irqst_ocp_mod_offs, prm_irqst_reg) & + omap_test_timeout((vdd->read_reg(vdd->prm_irqst_mod, prm_irqst_reg) & vdd->vp_data->prm_irqst_data->tranxdone_status), VP_TRANXDONE_TIMEOUT, timeout); if (timeout >= VP_TRANXDONE_TIMEOUT) @@ -496,8 +492,8 @@ static int vp_forceupdate_scale_voltage(struct omap_vdd_info *vdd, timeout = 0; while (timeout++ < VP_TRANXDONE_TIMEOUT) { vdd->write_reg(vdd->vp_data->prm_irqst_data->tranxdone_status, - prm_irqst_ocp_mod_offs, prm_irqst_reg); - if (!(vdd->read_reg(prm_irqst_ocp_mod_offs, prm_irqst_reg) & + vdd->prm_irqst_mod, prm_irqst_reg); + if (!(vdd->read_reg(vdd->prm_irqst_mod, prm_irqst_reg) & vdd->vp_data->prm_irqst_data->tranxdone_status)) break; udelay(1); @@ -508,13 +504,13 @@ static int vp_forceupdate_scale_voltage(struct omap_vdd_info *vdd, "to clear the TRANXDONE status\n", __func__, vdd->voltdm.name); - vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig); + vpconfig = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig); /* Clear initVDD copy trigger bit */ vpconfig &= ~vdd->vp_data->vp_common->vpconfig_initvdd; - vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig); + vdd->write_reg(vpconfig, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig); /* Clear force bit */ vpconfig &= ~vdd->vp_data->vp_common->vpconfig_forceupdate; - vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig); + vdd->write_reg(vpconfig, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig); return 0; } @@ -525,10 +521,10 @@ static void __init omap3_vfsm_init(struct omap_vdd_info *vdd) * Voltage Manager FSM parameters init * XXX This data should be passed in from the board file */ - vdd->write_reg(OMAP3_CLKSETUP, prm_mod_offs, OMAP3_PRM_CLKSETUP_OFFSET); - vdd->write_reg(OMAP3_VOLTOFFSET, prm_mod_offs, + vdd->write_reg(OMAP3_CLKSETUP, vdd->vc_data->vc_common->prm_mod, OMAP3_PRM_CLKSETUP_OFFSET); + vdd->write_reg(OMAP3_VOLTOFFSET, vdd->vc_data->vc_common->prm_mod, OMAP3_PRM_VOLTOFFSET_OFFSET); - vdd->write_reg(OMAP3_VOLTSETUP2, prm_mod_offs, + vdd->write_reg(OMAP3_VOLTSETUP2, vdd->vc_data->vc_common->prm_mod, OMAP3_PRM_VOLTSETUP2_OFFSET); } @@ -550,15 +546,15 @@ static void __init omap3_vc_init(struct omap_vdd_info *vdd) (onlp_vsel << vdd->vc_data->vc_common->cmd_onlp_shift) | (ret_vsel << vdd->vc_data->vc_common->cmd_ret_shift) | (off_vsel << vdd->vc_data->vc_common->cmd_off_shift)); - vdd->write_reg(vc_val, prm_mod_offs, vdd->vc_data->cmdval_reg); + vdd->write_reg(vc_val, vdd->vc_data->vc_common->prm_mod, vdd->vc_data->cmdval_reg); /* * Generic VC parameters init * XXX This data should be abstracted out */ - vdd->write_reg(OMAP3430_CMD1_MASK | OMAP3430_RAV1_MASK, prm_mod_offs, + vdd->write_reg(OMAP3430_CMD1_MASK | OMAP3430_RAV1_MASK, vdd->vc_data->vc_common->prm_mod, OMAP3_PRM_VC_CH_CONF_OFFSET); - vdd->write_reg(OMAP3430_MCODE_SHIFT | OMAP3430_HSEN_MASK, prm_mod_offs, + vdd->write_reg(OMAP3430_MCODE_SHIFT | OMAP3430_HSEN_MASK, vdd->vc_data->vc_common->prm_mod, OMAP3_PRM_VC_I2C_CFG_OFFSET); omap3_vfsm_init(vdd); @@ -585,11 +581,11 @@ static void __init omap4_vc_init(struct omap_vdd_info *vdd) vc_val = (OMAP4430_RAV_VDD_MPU_L_MASK | OMAP4430_CMD_VDD_MPU_L_MASK | OMAP4430_RAV_VDD_IVA_L_MASK | OMAP4430_CMD_VDD_IVA_L_MASK | OMAP4430_RAV_VDD_CORE_L_MASK | OMAP4430_CMD_VDD_CORE_L_MASK); - vdd->write_reg(vc_val, prm_mod_offs, OMAP4_PRM_VC_CFG_CHANNEL_OFFSET); + vdd->write_reg(vc_val, vdd->vc_data->vc_common->prm_mod, OMAP4_PRM_VC_CFG_CHANNEL_OFFSET); /* XXX These are magic numbers and do not belong! */ vc_val = (0x60 << OMAP4430_SCLL_SHIFT | 0x26 << OMAP4430_SCLH_SHIFT); - vdd->write_reg(vc_val, prm_mod_offs, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET); + vdd->write_reg(vc_val, vdd->vc_data->vc_common->prm_mod, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET); is_initialized = true; } @@ -612,27 +608,27 @@ static void __init omap_vc_init(struct omap_vdd_info *vdd) } /* Set up the SMPS_SA(i2c slave address in VC */ - vc_val = vdd->read_reg(prm_mod_offs, + vc_val = vdd->read_reg(vdd->vc_data->vc_common->prm_mod, vdd->vc_data->vc_common->smps_sa_reg); vc_val &= ~vdd->vc_data->smps_sa_mask; vc_val |= vdd->pmic_info->i2c_slave_addr << vdd->vc_data->smps_sa_shift; - vdd->write_reg(vc_val, prm_mod_offs, + vdd->write_reg(vc_val, vdd->vc_data->vc_common->prm_mod, vdd->vc_data->vc_common->smps_sa_reg); /* Setup the VOLRA(pmic reg addr) in VC */ - vc_val = vdd->read_reg(prm_mod_offs, + vc_val = vdd->read_reg(vdd->vc_data->vc_common->prm_mod, vdd->vc_data->vc_common->smps_volra_reg); vc_val &= ~vdd->vc_data->smps_volra_mask; vc_val |= vdd->pmic_info->pmic_reg << vdd->vc_data->smps_volra_shift; - vdd->write_reg(vc_val, prm_mod_offs, + vdd->write_reg(vc_val, vdd->vc_data->vc_common->prm_mod, vdd->vc_data->vc_common->smps_volra_reg); /* Configure the setup times */ - vc_val = vdd->read_reg(prm_mod_offs, vdd->vfsm->voltsetup_reg); + vc_val = vdd->read_reg(vdd->vc_data->vc_common->prm_mod, vdd->vfsm->voltsetup_reg); vc_val &= ~vdd->vfsm->voltsetup_mask; vc_val |= vdd->pmic_info->volt_setup_time << vdd->vfsm->voltsetup_shift; - vdd->write_reg(vc_val, prm_mod_offs, vdd->vfsm->voltsetup_reg); + vdd->write_reg(vc_val, vdd->vc_data->vc_common->prm_mod, vdd->vfsm->voltsetup_reg); if (cpu_is_omap34xx()) omap3_vc_init(vdd); @@ -713,7 +709,7 @@ unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm) return 0; } - curr_vsel = vdd->read_reg(prm_mod_offs, vdd->vp_data->voltage); + curr_vsel = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->voltage); if (!vdd->pmic_info || !vdd->pmic_info->vsel_to_uv) { pr_warning("%s: PMIC function to convert vsel to voltage" @@ -755,9 +751,9 @@ void omap_vp_enable(struct voltagedomain *voltdm) vp_latch_vsel(vdd); /* Enable VP */ - vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig); + vpconfig = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig); vpconfig |= vdd->vp_data->vp_common->vpconfig_vpenable; - vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig); + vdd->write_reg(vpconfig, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig); vdd->vp_enabled = true; } @@ -794,14 +790,14 @@ void omap_vp_disable(struct voltagedomain *voltdm) } /* Disable VP */ - vpconfig = vdd->read_reg(prm_mod_offs, vdd->vp_data->vpconfig); + vpconfig = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig); vpconfig &= ~vdd->vp_data->vp_common->vpconfig_vpenable; - vdd->write_reg(vpconfig, prm_mod_offs, vdd->vp_data->vpconfig); + vdd->write_reg(vpconfig, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig); /* * Wait for VP idle Typical latency is <2us. Maximum latency is ~100us */ - omap_test_timeout((vdd->read_reg(prm_mod_offs, vdd->vp_data->vstatus)), + omap_test_timeout((vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vstatus)), VP_IDLE_TIMEOUT, timeout); if (timeout >= VP_IDLE_TIMEOUT) @@ -1094,12 +1090,9 @@ int __init omap_voltage_late_init(void) } /* XXX document */ -int __init omap_voltage_early_init(s16 prm_mod, s16 prm_irqst_ocp_mod, - struct omap_vdd_info *omap_vdd_array[], +int __init omap_voltage_early_init(struct omap_vdd_info *omap_vdd_array[], u8 omap_vdd_count) { - prm_mod_offs = prm_mod; - prm_irqst_ocp_mod_offs = prm_irqst_ocp_mod; vdd_info = omap_vdd_array; nr_scalable_vdd = omap_vdd_count; return 0; diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h index e9f5408244e0..ffdc55ee1644 100644 --- a/arch/arm/mach-omap2/voltage.h +++ b/arch/arm/mach-omap2/voltage.h @@ -119,6 +119,7 @@ struct omap_volt_pmic_info { * @voltdm : pointer to the voltage domain structure * @debug_dir : debug directory for this voltage domain. * @curr_volt : current voltage for this vdd. + * @prm_irqst_mod : PRM module id used for PRM IRQ status register access * @vp_enabled : flag to keep track of whether vp is enabled or not * @volt_scale : API to scale the voltage of the vdd. */ @@ -133,6 +134,8 @@ struct omap_vdd_info { struct dentry *debug_dir; u32 curr_volt; bool vp_enabled; + + s16 prm_irqst_mod; u32 (*read_reg) (u16 mod, u8 offset); void (*write_reg) (u32 val, u16 mod, u8 offset); int (*volt_scale) (struct omap_vdd_info *vdd, @@ -151,8 +154,7 @@ struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm, unsigned long volt); unsigned long omap_voltage_get_nom_volt(struct voltagedomain *voltdm); struct dentry *omap_voltage_get_dbgdir(struct voltagedomain *voltdm); -int __init omap_voltage_early_init(s16 prm_mod, s16 prm_irqst_mod, - struct omap_vdd_info *omap_vdd_array[], +int __init omap_voltage_early_init(struct omap_vdd_info *omap_vdd_array[], u8 omap_vdd_count); #ifdef CONFIG_PM int omap_voltage_register_pmic(struct voltagedomain *voltdm, diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c index def230fd2fde..0d30b7fe269b 100644 --- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c +++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c @@ -38,6 +38,7 @@ static const struct omap_vfsm_instance_data omap3_vdd1_vfsm_data = { }; static struct omap_vdd_info omap3_vdd1_info = { + .prm_irqst_mod = OCP_MOD, .vp_data = &omap3_vp1_data, .vc_data = &omap3_vc1_data, .vfsm = &omap3_vdd1_vfsm_data, @@ -53,6 +54,7 @@ static const struct omap_vfsm_instance_data omap3_vdd2_vfsm_data = { }; static struct omap_vdd_info omap3_vdd2_info = { + .prm_irqst_mod = OCP_MOD, .vp_data = &omap3_vp2_data, .vc_data = &omap3_vc2_data, .vfsm = &omap3_vdd2_vfsm_data, @@ -70,9 +72,6 @@ static struct omap_vdd_info *omap3_vdd_info[] = { /* OMAP3 specific voltage init functions */ static int __init omap3xxx_voltage_early_init(void) { - s16 prm_mod = OMAP3430_GR_MOD; - s16 prm_irqst_ocp_mod = OCP_MOD; - if (!cpu_is_omap34xx()) return 0; @@ -88,8 +87,7 @@ static int __init omap3xxx_voltage_early_init(void) omap3_vdd2_info.volt_data = omap34xx_vddcore_volt_data; } - return omap_voltage_early_init(prm_mod, prm_irqst_ocp_mod, - omap3_vdd_info, + return omap_voltage_early_init(omap3_vdd_info, ARRAY_SIZE(omap3_vdd_info)); }; core_initcall(omap3xxx_voltage_early_init); diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c b/arch/arm/mach-omap2/voltagedomains44xx_data.c index cb64996de0e1..1c2d7d78de13 100644 --- a/arch/arm/mach-omap2/voltagedomains44xx_data.c +++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c @@ -37,6 +37,7 @@ static const struct omap_vfsm_instance_data omap4_vdd_mpu_vfsm_data = { }; static struct omap_vdd_info omap4_vdd_mpu_info = { + .prm_irqst_mod = OMAP4430_PRM_OCP_SOCKET_INST, .vp_data = &omap4_vp_mpu_data, .vc_data = &omap4_vc_mpu_data, .vfsm = &omap4_vdd_mpu_vfsm_data, @@ -50,6 +51,7 @@ static const struct omap_vfsm_instance_data omap4_vdd_iva_vfsm_data = { }; static struct omap_vdd_info omap4_vdd_iva_info = { + .prm_irqst_mod = OMAP4430_PRM_OCP_SOCKET_INST, .vp_data = &omap4_vp_iva_data, .vc_data = &omap4_vc_iva_data, .vfsm = &omap4_vdd_iva_vfsm_data, @@ -63,6 +65,7 @@ static const struct omap_vfsm_instance_data omap4_vdd_core_vfsm_data = { }; static struct omap_vdd_info omap4_vdd_core_info = { + .prm_irqst_mod = OMAP4430_PRM_OCP_SOCKET_INST, .vp_data = &omap4_vp_core_data, .vc_data = &omap4_vc_core_data, .vfsm = &omap4_vdd_core_vfsm_data, @@ -81,9 +84,6 @@ static struct omap_vdd_info *omap4_vdd_info[] = { /* OMAP4 specific voltage init functions */ static int __init omap44xx_voltage_early_init(void) { - s16 prm_mod = OMAP4430_PRM_DEVICE_INST; - s16 prm_irqst_ocp_mod = OMAP4430_PRM_OCP_SOCKET_INST; - if (!cpu_is_omap44xx()) return 0; @@ -95,8 +95,7 @@ static int __init omap44xx_voltage_early_init(void) omap4_vdd_iva_info.volt_data = omap44xx_vdd_iva_volt_data; omap4_vdd_core_info.volt_data = omap44xx_vdd_core_volt_data; - return omap_voltage_early_init(prm_mod, prm_irqst_ocp_mod, - omap4_vdd_info, + return omap_voltage_early_init(omap4_vdd_info, ARRAY_SIZE(omap4_vdd_info)); }; core_initcall(omap44xx_voltage_early_init); diff --git a/arch/arm/mach-omap2/vp.h b/arch/arm/mach-omap2/vp.h index 7ce134f7de79..d277da6c0378 100644 --- a/arch/arm/mach-omap2/vp.h +++ b/arch/arm/mach-omap2/vp.h @@ -42,6 +42,7 @@ * @vpconfig_vlimitto_vddmin_shift: VDDMIN field shift in PRM_VP*_VLIMITTO reg * @vpconfig_vlimitto_vddmax_shift: VDDMAX field shift in PRM_VP*_VLIMITTO reg * @vpconfig_vlimitto_timeout_shift: TIMEOUT field shift in PRM_VP*_VLIMITTO reg + * @prm_mod: PRM module id used for PRM register access * * XXX It it not necessary to have both a mask and a shift for the same * bitfield - remove one @@ -54,6 +55,7 @@ struct omap_vp_common_data { u32 vpconfig_initvdd; u32 vpconfig_forceupdate; u32 vpconfig_vpenable; + s16 prm_mod; u8 vpconfig_erroroffset_shift; u8 vpconfig_errorgain_shift; u8 vpconfig_initvoltage_shift; diff --git a/arch/arm/mach-omap2/vp3xxx_data.c b/arch/arm/mach-omap2/vp3xxx_data.c index 645217094e51..c9b3e64d4e4e 100644 --- a/arch/arm/mach-omap2/vp3xxx_data.c +++ b/arch/arm/mach-omap2/vp3xxx_data.c @@ -31,6 +31,7 @@ * XXX This stuff presumably belongs in the vp3xxx.c or vp.c file. */ static const struct omap_vp_common_data omap3_vp_common = { + .prm_mod = OMAP3430_GR_MOD, .vpconfig_erroroffset_shift = OMAP3430_ERROROFFSET_SHIFT, .vpconfig_errorgain_mask = OMAP3430_ERRORGAIN_MASK, .vpconfig_errorgain_shift = OMAP3430_ERRORGAIN_SHIFT, diff --git a/arch/arm/mach-omap2/vp44xx_data.c b/arch/arm/mach-omap2/vp44xx_data.c index 65d1ad63800a..1a0842e59e83 100644 --- a/arch/arm/mach-omap2/vp44xx_data.c +++ b/arch/arm/mach-omap2/vp44xx_data.c @@ -32,6 +32,7 @@ * XXX This stuff presumably belongs in the vp44xx.c or vp.c file. */ static const struct omap_vp_common_data omap4_vp_common = { + .prm_mod = OMAP4430_PRM_DEVICE_INST, .vpconfig_erroroffset_shift = OMAP4430_ERROROFFSET_SHIFT, .vpconfig_errorgain_mask = OMAP4430_ERRORGAIN_MASK, .vpconfig_errorgain_shift = OMAP4430_ERRORGAIN_SHIFT, -- cgit v1.2.3 From c39263c33f9c94443aa9fc4fc2b1f1191666fccd Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 16 Mar 2011 17:20:35 -0700 Subject: OMAP2+: voltage: move prm_irqst_reg from VP into voltage domain The prm_irqst_reg is not part of the VP. Move it up into the common voltage domain struct. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/voltage.c | 15 +++++++-------- arch/arm/mach-omap2/voltage.h | 1 + arch/arm/mach-omap2/voltagedomains3xxx_data.c | 2 ++ arch/arm/mach-omap2/voltagedomains44xx_data.c | 3 +++ arch/arm/mach-omap2/vp.h | 3 --- arch/arm/mach-omap2/vp3xxx_data.c | 2 -- arch/arm/mach-omap2/vp44xx_data.c | 3 --- 7 files changed, 13 insertions(+), 16 deletions(-) diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index 3151d7525f89..a366a6b30a62 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -426,23 +426,21 @@ static int vp_forceupdate_scale_voltage(struct omap_vdd_info *vdd, unsigned long target_volt) { u32 vpconfig; - u8 target_vsel, current_vsel, prm_irqst_reg; + u8 target_vsel, current_vsel; int ret, timeout = 0; ret = _pre_volt_scale(vdd, target_volt, &target_vsel, ¤t_vsel); if (ret) return ret; - prm_irqst_reg = vdd->vp_data->prm_irqst_data->prm_irqst_reg; - /* * Clear all pending TransactionDone interrupt/status. Typical latency * is <3us */ while (timeout++ < VP_TRANXDONE_TIMEOUT) { vdd->write_reg(vdd->vp_data->prm_irqst_data->tranxdone_status, - vdd->prm_irqst_mod, prm_irqst_reg); - if (!(vdd->read_reg(vdd->prm_irqst_mod, prm_irqst_reg) & + vdd->prm_irqst_mod, vdd->prm_irqst_reg); + if (!(vdd->read_reg(vdd->prm_irqst_mod, vdd->prm_irqst_reg) & vdd->vp_data->prm_irqst_data->tranxdone_status)) break; udelay(1); @@ -475,7 +473,8 @@ static int vp_forceupdate_scale_voltage(struct omap_vdd_info *vdd, * Depends on SMPSWAITTIMEMIN/MAX and voltage change */ timeout = 0; - omap_test_timeout((vdd->read_reg(vdd->prm_irqst_mod, prm_irqst_reg) & + omap_test_timeout((vdd->read_reg(vdd->prm_irqst_mod, + vdd->prm_irqst_reg) & vdd->vp_data->prm_irqst_data->tranxdone_status), VP_TRANXDONE_TIMEOUT, timeout); if (timeout >= VP_TRANXDONE_TIMEOUT) @@ -492,8 +491,8 @@ static int vp_forceupdate_scale_voltage(struct omap_vdd_info *vdd, timeout = 0; while (timeout++ < VP_TRANXDONE_TIMEOUT) { vdd->write_reg(vdd->vp_data->prm_irqst_data->tranxdone_status, - vdd->prm_irqst_mod, prm_irqst_reg); - if (!(vdd->read_reg(vdd->prm_irqst_mod, prm_irqst_reg) & + vdd->prm_irqst_mod, vdd->prm_irqst_reg); + if (!(vdd->read_reg(vdd->prm_irqst_mod, vdd->prm_irqst_reg) & vdd->vp_data->prm_irqst_data->tranxdone_status)) break; udelay(1); diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h index ffdc55ee1644..db23d493f663 100644 --- a/arch/arm/mach-omap2/voltage.h +++ b/arch/arm/mach-omap2/voltage.h @@ -136,6 +136,7 @@ struct omap_vdd_info { bool vp_enabled; s16 prm_irqst_mod; + u8 prm_irqst_reg; u32 (*read_reg) (u16 mod, u8 offset); void (*write_reg) (u32 val, u16 mod, u8 offset); int (*volt_scale) (struct omap_vdd_info *vdd, diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c index 0d30b7fe269b..f831f9adc881 100644 --- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c +++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c @@ -39,6 +39,7 @@ static const struct omap_vfsm_instance_data omap3_vdd1_vfsm_data = { static struct omap_vdd_info omap3_vdd1_info = { .prm_irqst_mod = OCP_MOD, + .prm_irqst_reg = OMAP3_PRM_IRQSTATUS_MPU_OFFSET, .vp_data = &omap3_vp1_data, .vc_data = &omap3_vc1_data, .vfsm = &omap3_vdd1_vfsm_data, @@ -55,6 +56,7 @@ static const struct omap_vfsm_instance_data omap3_vdd2_vfsm_data = { static struct omap_vdd_info omap3_vdd2_info = { .prm_irqst_mod = OCP_MOD, + .prm_irqst_reg = OMAP3_PRM_IRQSTATUS_MPU_OFFSET, .vp_data = &omap3_vp2_data, .vc_data = &omap3_vc2_data, .vfsm = &omap3_vdd2_vfsm_data, diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c b/arch/arm/mach-omap2/voltagedomains44xx_data.c index 1c2d7d78de13..64dc265aa2ad 100644 --- a/arch/arm/mach-omap2/voltagedomains44xx_data.c +++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c @@ -38,6 +38,7 @@ static const struct omap_vfsm_instance_data omap4_vdd_mpu_vfsm_data = { static struct omap_vdd_info omap4_vdd_mpu_info = { .prm_irqst_mod = OMAP4430_PRM_OCP_SOCKET_INST, + .prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET, .vp_data = &omap4_vp_mpu_data, .vc_data = &omap4_vc_mpu_data, .vfsm = &omap4_vdd_mpu_vfsm_data, @@ -52,6 +53,7 @@ static const struct omap_vfsm_instance_data omap4_vdd_iva_vfsm_data = { static struct omap_vdd_info omap4_vdd_iva_info = { .prm_irqst_mod = OMAP4430_PRM_OCP_SOCKET_INST, + .prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_OFFSET, .vp_data = &omap4_vp_iva_data, .vc_data = &omap4_vc_iva_data, .vfsm = &omap4_vdd_iva_vfsm_data, @@ -66,6 +68,7 @@ static const struct omap_vfsm_instance_data omap4_vdd_core_vfsm_data = { static struct omap_vdd_info omap4_vdd_core_info = { .prm_irqst_mod = OMAP4430_PRM_OCP_SOCKET_INST, + .prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_OFFSET, .vp_data = &omap4_vp_core_data, .vc_data = &omap4_vc_core_data, .vfsm = &omap4_vdd_core_vfsm_data, diff --git a/arch/arm/mach-omap2/vp.h b/arch/arm/mach-omap2/vp.h index d277da6c0378..5406b08463b6 100644 --- a/arch/arm/mach-omap2/vp.h +++ b/arch/arm/mach-omap2/vp.h @@ -70,16 +70,13 @@ struct omap_vp_common_data { /** * struct omap_vp_prm_irqst_data - PRM_IRQSTATUS_MPU.VP_TRANXDONE_ST data - * @prm_irqst_reg: reg offset for PRM_IRQSTATUS_MPU from top of PRM * @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg * - * XXX prm_irqst_reg does not belong here * XXX Note that on OMAP3, VP_TRANXDONE interrupt may not work due to a * hardware bug * XXX This structure is probably not needed */ struct omap_vp_prm_irqst_data { - u8 prm_irqst_reg; u32 tranxdone_status; }; diff --git a/arch/arm/mach-omap2/vp3xxx_data.c b/arch/arm/mach-omap2/vp3xxx_data.c index c9b3e64d4e4e..a8ea0451d0b4 100644 --- a/arch/arm/mach-omap2/vp3xxx_data.c +++ b/arch/arm/mach-omap2/vp3xxx_data.c @@ -51,7 +51,6 @@ static const struct omap_vp_common_data omap3_vp_common = { }; static const struct omap_vp_prm_irqst_data omap3_vp1_prm_irqst_data = { - .prm_irqst_reg = OMAP3_PRM_IRQSTATUS_MPU_OFFSET, .tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK, }; @@ -67,7 +66,6 @@ struct omap_vp_instance_data omap3_vp1_data = { }; static const struct omap_vp_prm_irqst_data omap3_vp2_prm_irqst_data = { - .prm_irqst_reg = OMAP3_PRM_IRQSTATUS_MPU_OFFSET, .tranxdone_status = OMAP3430_VP2_TRANXDONE_ST_MASK, }; diff --git a/arch/arm/mach-omap2/vp44xx_data.c b/arch/arm/mach-omap2/vp44xx_data.c index 1a0842e59e83..0957c24b1fa9 100644 --- a/arch/arm/mach-omap2/vp44xx_data.c +++ b/arch/arm/mach-omap2/vp44xx_data.c @@ -52,7 +52,6 @@ static const struct omap_vp_common_data omap4_vp_common = { }; static const struct omap_vp_prm_irqst_data omap4_vp_mpu_prm_irqst_data = { - .prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET, .tranxdone_status = OMAP4430_VP_MPU_TRANXDONE_ST_MASK, }; @@ -68,7 +67,6 @@ struct omap_vp_instance_data omap4_vp_mpu_data = { }; static const struct omap_vp_prm_irqst_data omap4_vp_iva_prm_irqst_data = { - .prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_OFFSET, .tranxdone_status = OMAP4430_VP_IVA_TRANXDONE_ST_MASK, }; @@ -84,7 +82,6 @@ struct omap_vp_instance_data omap4_vp_iva_data = { }; static const struct omap_vp_prm_irqst_data omap4_vp_core_prm_irqst_data = { - .prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_OFFSET, .tranxdone_status = OMAP4430_VP_CORE_TRANXDONE_ST_MASK, }; -- cgit v1.2.3 From 81a604823797ddb3aaf2a78cc1c6a1fa8f4d200c Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 16 Mar 2011 14:25:45 -0700 Subject: OMAP2+: voltage: start towards a new voltagedomain layer Start cleaning up the voltage layer to have a voltage domain layer that resembles the structure of the existing clock and power domain layers. To that end: - move the 'struct voltagedomain' out of 'struct omap_vdd_info' to become the primary data structure. - convert any functions taking a pointer to struct omap_vdd_info into functions taking a struct voltagedomain pointer. - convert the register & initialize of voltage domains to look like that of powerdomains - convert omap_voltage_domain_lookup() to voltdm_lookup(), modeled after the current powerdomain and clockdomain lookup functions. - omap_voltage_late_init(): only configure VDD info when the vdd_info struct is non-NULL Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/io.c | 3 + arch/arm/mach-omap2/omap_twl.c | 10 +- arch/arm/mach-omap2/pm.c | 2 +- arch/arm/mach-omap2/sr_device.c | 2 +- arch/arm/mach-omap2/voltage.c | 257 +++++++++++++++----------- arch/arm/mach-omap2/voltage.h | 27 ++- arch/arm/mach-omap2/voltagedomains3xxx_data.c | 34 ++-- arch/arm/mach-omap2/voltagedomains44xx_data.c | 44 ++--- 8 files changed, 207 insertions(+), 172 deletions(-) diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 40b6d47fdbda..7c36fde5dd62 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -38,6 +38,7 @@ #include "io.h" #include +#include "voltage.h" #include "powerdomain.h" #include "clockdomain.h" @@ -349,10 +350,12 @@ void __init omap2_init_common_infrastructure(void) omap243x_clockdomains_init(); omap2430_hwmod_init(); } else if (cpu_is_omap34xx()) { + omap3xxx_voltagedomains_init(); omap3xxx_powerdomains_init(); omap3xxx_clockdomains_init(); omap3xxx_hwmod_init(); } else if (cpu_is_omap44xx()) { + omap44xx_voltagedomains_init(); omap44xx_powerdomains_init(); omap44xx_clockdomains_init(); omap44xx_hwmod_init(); diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c index 07d6140baa9d..fcd2f62fbdc3 100644 --- a/arch/arm/mach-omap2/omap_twl.c +++ b/arch/arm/mach-omap2/omap_twl.c @@ -250,13 +250,13 @@ int __init omap4_twl_init(void) if (!cpu_is_omap44xx()) return -ENODEV; - voltdm = omap_voltage_domain_lookup("mpu"); + voltdm = voltdm_lookup("mpu"); omap_voltage_register_pmic(voltdm, &omap4_mpu_volt_info); - voltdm = omap_voltage_domain_lookup("iva"); + voltdm = voltdm_lookup("iva"); omap_voltage_register_pmic(voltdm, &omap4_iva_volt_info); - voltdm = omap_voltage_domain_lookup("core"); + voltdm = voltdm_lookup("core"); omap_voltage_register_pmic(voltdm, &omap4_core_volt_info); return 0; @@ -288,10 +288,10 @@ int __init omap3_twl_init(void) if (!twl_sr_enable_autoinit) omap3_twl_set_sr_bit(true); - voltdm = omap_voltage_domain_lookup("mpu"); + voltdm = voltdm_lookup("mpu"); omap_voltage_register_pmic(voltdm, &omap3_mpu_volt_info); - voltdm = omap_voltage_domain_lookup("core"); + voltdm = voltdm_lookup("core"); omap_voltage_register_pmic(voltdm, &omap3_core_volt_info); return 0; diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 472bf22d5e84..c10f8f6ae6f6 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -181,7 +181,7 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name, goto exit; } - voltdm = omap_voltage_domain_lookup(vdd_name); + voltdm = voltdm_lookup(vdd_name); if (IS_ERR(voltdm)) { printk(KERN_ERR "%s: Unable to get vdd pointer for vdd_%s\n", __func__, vdd_name); diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c index 10d3c5ee8018..2782d3f604ca 100644 --- a/arch/arm/mach-omap2/sr_device.c +++ b/arch/arm/mach-omap2/sr_device.c @@ -102,7 +102,7 @@ static int sr_dev_init(struct omap_hwmod *oh, void *user) sr_data->senn_mod = 0x1; sr_data->senp_mod = 0x1; - sr_data->voltdm = omap_voltage_domain_lookup(oh->vdd_name); + sr_data->voltdm = voltdm_lookup(oh->vdd_name); if (IS_ERR(sr_data->voltdm)) { pr_err("%s: Unable to get voltage domain pointer for VDD %s\n", __func__, oh->vdd_name); diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index a366a6b30a62..4f0361a23ff6 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -40,20 +40,13 @@ #include "vc.h" #include "vp.h" -#define VOLTAGE_DIR_SIZE 16 - - -static struct omap_vdd_info **vdd_info; - -/* - * Number of scalable voltage domains. - */ -static int nr_scalable_vdd; +static LIST_HEAD(voltdm_list); +#define VOLTAGE_DIR_SIZE 16 static struct dentry *voltage_dir; /* Init function pointers */ -static int vp_forceupdate_scale_voltage(struct omap_vdd_info *vdd, +static int vp_forceupdate_scale_voltage(struct voltagedomain *voltdm, unsigned long target_volt); static u32 omap3_voltage_read_reg(u16 mod, u8 offset) @@ -77,11 +70,12 @@ static void omap4_voltage_write_reg(u32 val, u16 mod, u8 offset) omap4_prminst_write_inst_reg(val, OMAP4430_PRM_PARTITION, mod, offset); } -static int __init _config_common_vdd_data(struct omap_vdd_info *vdd) +static int __init _config_common_vdd_data(struct voltagedomain *voltdm) { char *sys_ck_name; struct clk *sys_ck; u32 sys_clk_speed, timeout_val, waittime; + struct omap_vdd_info *vdd = voltdm->vdd; /* * XXX Clockfw should handle this, or this should be in a @@ -101,7 +95,7 @@ static int __init _config_common_vdd_data(struct omap_vdd_info *vdd) sys_ck = clk_get(NULL, sys_ck_name); if (IS_ERR(sys_ck)) { pr_warning("%s: Could not get the sys clk to calculate" - "various vdd_%s params\n", __func__, vdd->voltdm.name); + "various vdd_%s params\n", __func__, voltdm->name); return -EINVAL; } sys_clk_speed = clk_get_rate(sys_ck); @@ -135,7 +129,8 @@ static int __init _config_common_vdd_data(struct omap_vdd_info *vdd) /* Voltage debugfs support */ static int vp_volt_debug_get(void *data, u64 *val) { - struct omap_vdd_info *vdd = (struct omap_vdd_info *) data; + struct voltagedomain *voltdm = (struct voltagedomain *)data; + struct omap_vdd_info *vdd = voltdm->vdd; u8 vsel; if (!vdd) { @@ -157,14 +152,14 @@ static int vp_volt_debug_get(void *data, u64 *val) static int nom_volt_debug_get(void *data, u64 *val) { - struct omap_vdd_info *vdd = (struct omap_vdd_info *) data; + struct voltagedomain *voltdm = (struct voltagedomain *)data; - if (!vdd) { + if (!voltdm) { pr_warning("Wrong paramater passed\n"); return -EINVAL; } - *val = omap_voltage_get_nom_volt(&vdd->voltdm); + *val = omap_voltage_get_nom_volt(voltdm); return 0; } @@ -172,16 +167,17 @@ static int nom_volt_debug_get(void *data, u64 *val) DEFINE_SIMPLE_ATTRIBUTE(vp_volt_debug_fops, vp_volt_debug_get, NULL, "%llu\n"); DEFINE_SIMPLE_ATTRIBUTE(nom_volt_debug_fops, nom_volt_debug_get, NULL, "%llu\n"); -static void vp_latch_vsel(struct omap_vdd_info *vdd) +static void vp_latch_vsel(struct voltagedomain *voltdm) { u32 vpconfig; unsigned long uvdc; char vsel; + struct omap_vdd_info *vdd = voltdm->vdd; - uvdc = omap_voltage_get_nom_volt(&vdd->voltdm); + uvdc = omap_voltage_get_nom_volt(voltdm); if (!uvdc) { pr_warning("%s: unable to find current voltage for vdd_%s\n", - __func__, vdd->voltdm.name); + __func__, voltdm->name); return; } @@ -209,13 +205,14 @@ static void vp_latch_vsel(struct omap_vdd_info *vdd) } /* Generic voltage init functions */ -static void __init vp_init(struct omap_vdd_info *vdd) +static void __init vp_init(struct voltagedomain *voltdm) { + struct omap_vdd_info *vdd = voltdm->vdd; u32 vp_val; if (!vdd->read_reg || !vdd->write_reg) { pr_err("%s: No read/write API for accessing vdd_%s regs\n", - __func__, vdd->voltdm.name); + __func__, voltdm->name); return; } @@ -246,25 +243,26 @@ static void __init vp_init(struct omap_vdd_info *vdd) vdd->write_reg(vp_val, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vlimitto); } -static void __init vdd_debugfs_init(struct omap_vdd_info *vdd) +static void __init vdd_debugfs_init(struct voltagedomain *voltdm) { char *name; + struct omap_vdd_info *vdd = voltdm->vdd; name = kzalloc(VOLTAGE_DIR_SIZE, GFP_KERNEL); if (!name) { pr_warning("%s: Unable to allocate memory for debugfs" " directory name for vdd_%s", - __func__, vdd->voltdm.name); + __func__, voltdm->name); return; } strcpy(name, "vdd_"); - strcat(name, vdd->voltdm.name); + strcat(name, voltdm->name); vdd->debug_dir = debugfs_create_dir(name, voltage_dir); kfree(name); if (IS_ERR(vdd->debug_dir)) { pr_warning("%s: Unable to create debugfs directory for" - " vdd_%s\n", __func__, vdd->voltdm.name); + " vdd_%s\n", __func__, voltdm->name); vdd->debug_dir = NULL; return; } @@ -288,16 +286,17 @@ static void __init vdd_debugfs_init(struct omap_vdd_info *vdd) (void) debugfs_create_x16("vp_timeout", S_IRUGO, vdd->debug_dir, &(vdd->vp_rt_data.vlimitto_timeout)); (void) debugfs_create_file("curr_vp_volt", S_IRUGO, vdd->debug_dir, - (void *) vdd, &vp_volt_debug_fops); + (void *) voltdm, &vp_volt_debug_fops); (void) debugfs_create_file("curr_nominal_volt", S_IRUGO, - vdd->debug_dir, (void *) vdd, + vdd->debug_dir, (void *) voltdm, &nom_volt_debug_fops); } /* Voltage scale and accessory APIs */ -static int _pre_volt_scale(struct omap_vdd_info *vdd, +static int _pre_volt_scale(struct voltagedomain *voltdm, unsigned long target_volt, u8 *target_vsel, u8 *current_vsel) { + struct omap_vdd_info *vdd = voltdm->vdd; struct omap_volt_data *volt_data; const struct omap_vc_common_data *vc_common; const struct omap_vp_common_data *vp_common; @@ -309,25 +308,25 @@ static int _pre_volt_scale(struct omap_vdd_info *vdd, /* Check if suffiecient pmic info is available for this vdd */ if (!vdd->pmic_info) { pr_err("%s: Insufficient pmic info to scale the vdd_%s\n", - __func__, vdd->voltdm.name); + __func__, voltdm->name); return -EINVAL; } if (!vdd->pmic_info->uv_to_vsel) { pr_err("%s: PMIC function to convert voltage in uV to" "vsel not registered. Hence unable to scale voltage" - "for vdd_%s\n", __func__, vdd->voltdm.name); + "for vdd_%s\n", __func__, voltdm->name); return -ENODATA; } if (!vdd->read_reg || !vdd->write_reg) { pr_err("%s: No read/write API for accessing vdd_%s regs\n", - __func__, vdd->voltdm.name); + __func__, voltdm->name); return -EINVAL; } /* Get volt_data corresponding to target_volt */ - volt_data = omap_voltage_get_voltdata(&vdd->voltdm, target_volt); + volt_data = omap_voltage_get_voltdata(voltdm, target_volt); if (IS_ERR(volt_data)) volt_data = NULL; @@ -355,9 +354,10 @@ static int _pre_volt_scale(struct omap_vdd_info *vdd, return 0; } -static void _post_volt_scale(struct omap_vdd_info *vdd, +static void _post_volt_scale(struct voltagedomain *voltdm, unsigned long target_volt, u8 target_vsel, u8 current_vsel) { + struct omap_vdd_info *vdd = voltdm->vdd; u32 smps_steps = 0, smps_delay = 0; smps_steps = abs(target_vsel - current_vsel); @@ -370,15 +370,16 @@ static void _post_volt_scale(struct omap_vdd_info *vdd, } /* vc_bypass_scale_voltage - VC bypass method of voltage scaling */ -static int vc_bypass_scale_voltage(struct omap_vdd_info *vdd, +static int vc_bypass_scale_voltage(struct voltagedomain *voltdm, unsigned long target_volt) { + struct omap_vdd_info *vdd = voltdm->vdd; u32 loop_cnt = 0, retries_cnt = 0; u32 vc_valid, vc_bypass_val_reg, vc_bypass_value; u8 target_vsel, current_vsel; int ret; - ret = _pre_volt_scale(vdd, target_volt, &target_vsel, ¤t_vsel); + ret = _pre_volt_scale(voltdm, target_volt, &target_vsel, ¤t_vsel); if (ret) return ret; @@ -417,19 +418,20 @@ static int vc_bypass_scale_voltage(struct omap_vdd_info *vdd, vc_bypass_val_reg); } - _post_volt_scale(vdd, target_volt, target_vsel, current_vsel); + _post_volt_scale(voltdm, target_volt, target_vsel, current_vsel); return 0; } /* VP force update method of voltage scaling */ -static int vp_forceupdate_scale_voltage(struct omap_vdd_info *vdd, +static int vp_forceupdate_scale_voltage(struct voltagedomain *voltdm, unsigned long target_volt) { + struct omap_vdd_info *vdd = voltdm->vdd; u32 vpconfig; u8 target_vsel, current_vsel; int ret, timeout = 0; - ret = _pre_volt_scale(vdd, target_volt, &target_vsel, ¤t_vsel); + ret = _pre_volt_scale(voltdm, target_volt, &target_vsel, ¤t_vsel); if (ret) return ret; @@ -447,7 +449,7 @@ static int vp_forceupdate_scale_voltage(struct omap_vdd_info *vdd, } if (timeout >= VP_TRANXDONE_TIMEOUT) { pr_warning("%s: vdd_%s TRANXDONE timeout exceeded." - "Voltage change aborted", __func__, vdd->voltdm.name); + "Voltage change aborted", __func__, voltdm->name); return -ETIMEDOUT; } @@ -480,9 +482,9 @@ static int vp_forceupdate_scale_voltage(struct omap_vdd_info *vdd, if (timeout >= VP_TRANXDONE_TIMEOUT) pr_err("%s: vdd_%s TRANXDONE timeout exceeded." "TRANXDONE never got set after the voltage update\n", - __func__, vdd->voltdm.name); + __func__, voltdm->name); - _post_volt_scale(vdd, target_volt, target_vsel, current_vsel); + _post_volt_scale(voltdm, target_volt, target_vsel, current_vsel); /* * Disable TransactionDone interrupt , clear all status, clear @@ -501,7 +503,7 @@ static int vp_forceupdate_scale_voltage(struct omap_vdd_info *vdd, if (timeout >= VP_TRANXDONE_TIMEOUT) pr_warning("%s: vdd_%s TRANXDONE timeout exceeded while trying" "to clear the TRANXDONE status\n", - __func__, vdd->voltdm.name); + __func__, voltdm->name); vpconfig = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig); /* Clear initVDD copy trigger bit */ @@ -514,8 +516,10 @@ static int vp_forceupdate_scale_voltage(struct omap_vdd_info *vdd, return 0; } -static void __init omap3_vfsm_init(struct omap_vdd_info *vdd) +static void __init omap3_vfsm_init(struct voltagedomain *voltdm) { + struct omap_vdd_info *vdd = voltdm->vdd; + /* * Voltage Manager FSM parameters init * XXX This data should be passed in from the board file @@ -527,8 +531,9 @@ static void __init omap3_vfsm_init(struct omap_vdd_info *vdd) OMAP3_PRM_VOLTSETUP2_OFFSET); } -static void __init omap3_vc_init(struct omap_vdd_info *vdd) +static void __init omap3_vc_init(struct voltagedomain *voltdm) { + struct omap_vdd_info *vdd = voltdm->vdd; static bool is_initialized; u8 on_vsel, onlp_vsel, ret_vsel, off_vsel; u32 vc_val; @@ -556,15 +561,16 @@ static void __init omap3_vc_init(struct omap_vdd_info *vdd) vdd->write_reg(OMAP3430_MCODE_SHIFT | OMAP3430_HSEN_MASK, vdd->vc_data->vc_common->prm_mod, OMAP3_PRM_VC_I2C_CFG_OFFSET); - omap3_vfsm_init(vdd); + omap3_vfsm_init(voltdm); is_initialized = true; } /* OMAP4 specific voltage init functions */ -static void __init omap4_vc_init(struct omap_vdd_info *vdd) +static void __init omap4_vc_init(struct voltagedomain *voltdm) { + struct omap_vdd_info *vdd = voltdm->vdd; static bool is_initialized; u32 vc_val; @@ -589,20 +595,21 @@ static void __init omap4_vc_init(struct omap_vdd_info *vdd) is_initialized = true; } -static void __init omap_vc_init(struct omap_vdd_info *vdd) +static void __init omap_vc_init(struct voltagedomain *voltdm) { + struct omap_vdd_info *vdd = voltdm->vdd; u32 vc_val; if (!vdd->pmic_info || !vdd->pmic_info->uv_to_vsel) { pr_err("%s: PMIC info requried to configure vc for" "vdd_%s not populated.Hence cannot initialize vc\n", - __func__, vdd->voltdm.name); + __func__, voltdm->name); return; } if (!vdd->read_reg || !vdd->write_reg) { pr_err("%s: No read/write API for accessing vdd_%s regs\n", - __func__, vdd->voltdm.name); + __func__, voltdm->name); return; } @@ -630,23 +637,24 @@ static void __init omap_vc_init(struct omap_vdd_info *vdd) vdd->write_reg(vc_val, vdd->vc_data->vc_common->prm_mod, vdd->vfsm->voltsetup_reg); if (cpu_is_omap34xx()) - omap3_vc_init(vdd); + omap3_vc_init(voltdm); else if (cpu_is_omap44xx()) - omap4_vc_init(vdd); + omap4_vc_init(voltdm); } -static int __init omap_vdd_data_configure(struct omap_vdd_info *vdd) +static int __init omap_vdd_data_configure(struct voltagedomain *voltdm) { + struct omap_vdd_info *vdd = voltdm->vdd; int ret = -EINVAL; if (!vdd->pmic_info) { pr_err("%s: PMIC info requried to configure vdd_%s not" "populated.Hence cannot initialize vdd_%s\n", - __func__, vdd->voltdm.name, vdd->voltdm.name); + __func__, voltdm->name, voltdm->name); goto ovdc_out; } - if (IS_ERR_VALUE(_config_common_vdd_data(vdd))) + if (IS_ERR_VALUE(_config_common_vdd_data(voltdm))) goto ovdc_out; if (cpu_is_omap34xx()) { @@ -680,7 +688,7 @@ unsigned long omap_voltage_get_nom_volt(struct voltagedomain *voltdm) return 0; } - vdd = container_of(voltdm, struct omap_vdd_info, voltdm); + vdd = voltdm->vdd; return vdd->curr_volt; } @@ -701,7 +709,7 @@ unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm) return 0; } - vdd = container_of(voltdm, struct omap_vdd_info, voltdm); + vdd = voltdm->vdd; if (!vdd->read_reg) { pr_err("%s: No read API for reading vdd_%s regs\n", __func__, voltdm->name); @@ -736,7 +744,7 @@ void omap_vp_enable(struct voltagedomain *voltdm) return; } - vdd = container_of(voltdm, struct omap_vdd_info, voltdm); + vdd = voltdm->vdd; if (!vdd->read_reg || !vdd->write_reg) { pr_err("%s: No read/write API for accessing vdd_%s regs\n", __func__, voltdm->name); @@ -747,7 +755,7 @@ void omap_vp_enable(struct voltagedomain *voltdm) if (vdd->vp_enabled) return; - vp_latch_vsel(vdd); + vp_latch_vsel(voltdm); /* Enable VP */ vpconfig = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig); @@ -774,7 +782,7 @@ void omap_vp_disable(struct voltagedomain *voltdm) return; } - vdd = container_of(voltdm, struct omap_vdd_info, voltdm); + vdd = voltdm->vdd; if (!vdd->read_reg || !vdd->write_reg) { pr_err("%s: No read/write API for accessing vdd_%s regs\n", __func__, voltdm->name); @@ -827,7 +835,7 @@ int omap_voltage_scale_vdd(struct voltagedomain *voltdm, return -EINVAL; } - vdd = container_of(voltdm, struct omap_vdd_info, voltdm); + vdd = voltdm->vdd; if (!vdd->volt_scale) { pr_err("%s: No voltage scale API registered for vdd_%s\n", @@ -835,7 +843,7 @@ int omap_voltage_scale_vdd(struct voltagedomain *voltdm, return -ENODATA; } - return vdd->volt_scale(vdd, target_volt); + return vdd->volt_scale(voltdm, target_volt); } /** @@ -888,7 +896,7 @@ void omap_voltage_get_volttable(struct voltagedomain *voltdm, return; } - vdd = container_of(voltdm, struct omap_vdd_info, voltdm); + vdd = voltdm->vdd; *volt_data = vdd->volt_data; } @@ -919,7 +927,7 @@ struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm, return ERR_PTR(-EINVAL); } - vdd = container_of(voltdm, struct omap_vdd_info, voltdm); + vdd = voltdm->vdd; if (!vdd->volt_data) { pr_warning("%s: voltage table does not exist for vdd_%s\n", @@ -957,7 +965,7 @@ int omap_voltage_register_pmic(struct voltagedomain *voltdm, return -EINVAL; } - vdd = container_of(voltdm, struct omap_vdd_info, voltdm); + vdd = voltdm->vdd; vdd->pmic_info = pmic_info; @@ -984,7 +992,7 @@ struct dentry *omap_voltage_get_dbgdir(struct voltagedomain *voltdm) return NULL; } - vdd = container_of(voltdm, struct omap_vdd_info, voltdm); + vdd = voltdm->vdd; return vdd->debug_dir; } @@ -1009,7 +1017,7 @@ void omap_change_voltscale_method(struct voltagedomain *voltdm, return; } - vdd = container_of(voltdm, struct omap_vdd_info, voltdm); + vdd = voltdm->vdd; switch (voltscale_method) { case VOLTSCALE_VPFORCEUPDATE: @@ -1024,38 +1032,6 @@ void omap_change_voltscale_method(struct voltagedomain *voltdm, } } -/** - * omap_voltage_domain_lookup() - API to get the voltage domain pointer - * @name: Name of the voltage domain - * - * This API looks up in the global vdd_info struct for the - * existence of voltage domain . If it exists, the API returns - * a pointer to the voltage domain structure corresponding to the - * VDD. Else retuns error pointer. - */ -struct voltagedomain *omap_voltage_domain_lookup(char *name) -{ - int i; - - if (!vdd_info) { - pr_err("%s: Voltage driver init not yet happened.Faulting!\n", - __func__); - return ERR_PTR(-EINVAL); - } - - if (!name) { - pr_err("%s: No name to get the votage domain!\n", __func__); - return ERR_PTR(-EINVAL); - } - - for (i = 0; i < nr_scalable_vdd; i++) { - if (!(strcmp(name, vdd_info[i]->voltdm.name))) - return &vdd_info[i]->voltdm; - } - - return ERR_PTR(-EINVAL); -} - /** * omap_voltage_late_init() - Init the various voltage parameters * @@ -1065,9 +1041,9 @@ struct voltagedomain *omap_voltage_domain_lookup(char *name) */ int __init omap_voltage_late_init(void) { - int i; + struct voltagedomain *voltdm; - if (!vdd_info) { + if (list_empty(&voltdm_list)) { pr_err("%s: Voltage driver support not added\n", __func__); return -EINVAL; @@ -1077,22 +1053,81 @@ int __init omap_voltage_late_init(void) if (IS_ERR(voltage_dir)) pr_err("%s: Unable to create voltage debugfs main dir\n", __func__); - for (i = 0; i < nr_scalable_vdd; i++) { - if (omap_vdd_data_configure(vdd_info[i])) - continue; - omap_vc_init(vdd_info[i]); - vp_init(vdd_info[i]); - vdd_debugfs_init(vdd_info[i]); + list_for_each_entry(voltdm, &voltdm_list, node) { + if (voltdm->vdd) { + if (omap_vdd_data_configure(voltdm)) + continue; + omap_vc_init(voltdm); + vp_init(voltdm); + vdd_debugfs_init(voltdm); + } } return 0; } -/* XXX document */ -int __init omap_voltage_early_init(struct omap_vdd_info *omap_vdd_array[], - u8 omap_vdd_count) +static struct voltagedomain *_voltdm_lookup(const char *name) { - vdd_info = omap_vdd_array; - nr_scalable_vdd = omap_vdd_count; + struct voltagedomain *voltdm, *temp_voltdm; + + voltdm = NULL; + + list_for_each_entry(temp_voltdm, &voltdm_list, node) { + if (!strcmp(name, temp_voltdm->name)) { + voltdm = temp_voltdm; + break; + } + } + + return voltdm; +} + +static int _voltdm_register(struct voltagedomain *voltdm) +{ + if (!voltdm || !voltdm->name) + return -EINVAL; + + list_add(&voltdm->node, &voltdm_list); + + pr_debug("voltagedomain: registered %s\n", voltdm->name); + return 0; } + +/** + * voltdm_lookup - look up a voltagedomain by name, return a pointer + * @name: name of voltagedomain + * + * Find a registered voltagedomain by its name @name. Returns a pointer + * to the struct voltagedomain if found, or NULL otherwise. + */ +struct voltagedomain *voltdm_lookup(const char *name) +{ + struct voltagedomain *voltdm ; + + if (!name) + return NULL; + + voltdm = _voltdm_lookup(name); + + return voltdm; +} + +/** + * voltdm_init - set up the voltagedomain layer + * @voltdm_list: array of struct voltagedomain pointers to register + * + * Loop through the array of voltagedomains @voltdm_list, registering all + * that are available on the current CPU. If voltdm_list is supplied + * and not null, all of the referenced voltagedomains will be + * registered. No return value. + */ +void voltdm_init(struct voltagedomain **voltdms) +{ + struct voltagedomain **v; + + if (voltdms) { + for (v = voltdms; *v; v++) + _voltdm_register(*v); + } +} diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h index db23d493f663..544029896265 100644 --- a/arch/arm/mach-omap2/voltage.h +++ b/arch/arm/mach-omap2/voltage.h @@ -31,6 +31,8 @@ #define OMAP3_VOLTOFFSET 0xff #define OMAP3_VOLTSETUP2 0xff +struct omap_vdd_info; + /** * struct omap_vfsm_instance_data - per-voltage manager FSM register/bitfield * data @@ -50,11 +52,14 @@ struct omap_vfsm_instance_data { /** * struct voltagedomain - omap voltage domain global structure. - * @name: Name of the voltage domain which can be used as a unique - * identifier. + * @name: Name of the voltage domain which can be used as a unique identifier. + * @node: list_head linking all voltage domains + * @vdd: to be removed */ struct voltagedomain { char *name; + struct list_head node; + struct omap_vdd_info *vdd; }; /** @@ -116,7 +121,6 @@ struct omap_volt_pmic_info { * @vc_data : structure containing various various vc registers, * shifts, masks etc. * @vfsm : voltage manager FSM data - * @voltdm : pointer to the voltage domain structure * @debug_dir : debug directory for this voltage domain. * @curr_volt : current voltage for this vdd. * @prm_irqst_mod : PRM module id used for PRM IRQ status register access @@ -130,7 +134,6 @@ struct omap_vdd_info { struct omap_vp_runtime_data vp_rt_data; struct omap_vc_instance_data *vc_data; const struct omap_vfsm_instance_data *vfsm; - struct voltagedomain voltdm; struct dentry *debug_dir; u32 curr_volt; bool vp_enabled; @@ -139,7 +142,7 @@ struct omap_vdd_info { u8 prm_irqst_reg; u32 (*read_reg) (u16 mod, u8 offset); void (*write_reg) (u32 val, u16 mod, u8 offset); - int (*volt_scale) (struct omap_vdd_info *vdd, + int (*volt_scale) (struct voltagedomain *voltdm, unsigned long target_volt); }; @@ -155,16 +158,11 @@ struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm, unsigned long volt); unsigned long omap_voltage_get_nom_volt(struct voltagedomain *voltdm); struct dentry *omap_voltage_get_dbgdir(struct voltagedomain *voltdm); -int __init omap_voltage_early_init(struct omap_vdd_info *omap_vdd_array[], - u8 omap_vdd_count); #ifdef CONFIG_PM int omap_voltage_register_pmic(struct voltagedomain *voltdm, struct omap_volt_pmic_info *pmic_info); void omap_change_voltscale_method(struct voltagedomain *voltdm, int voltscale_method); -/* API to get the voltagedomain pointer */ -struct voltagedomain *omap_voltage_domain_lookup(char *name); - int omap_voltage_late_init(void); #else static inline int omap_voltage_register_pmic(struct voltagedomain *voltdm, @@ -178,10 +176,11 @@ static inline int omap_voltage_late_init(void) { return -EINVAL; } -static inline struct voltagedomain *omap_voltage_domain_lookup(char *name) -{ - return ERR_PTR(-EINVAL); -} #endif +extern void omap3xxx_voltagedomains_init(void); +extern void omap44xx_voltagedomains_init(void); + +struct voltagedomain *voltdm_lookup(const char *name); +void voltdm_init(struct voltagedomain **voltdm_list); #endif diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c index f831f9adc881..4bee412b673b 100644 --- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c +++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c @@ -43,9 +43,6 @@ static struct omap_vdd_info omap3_vdd1_info = { .vp_data = &omap3_vp1_data, .vc_data = &omap3_vc1_data, .vfsm = &omap3_vdd1_vfsm_data, - .voltdm = { - .name = "mpu", - }, }; static const struct omap_vfsm_instance_data omap3_vdd2_vfsm_data = { @@ -60,23 +57,26 @@ static struct omap_vdd_info omap3_vdd2_info = { .vp_data = &omap3_vp2_data, .vc_data = &omap3_vc2_data, .vfsm = &omap3_vdd2_vfsm_data, - .voltdm = { - .name = "core", - }, }; -/* OMAP3 VDD structures */ -static struct omap_vdd_info *omap3_vdd_info[] = { - &omap3_vdd1_info, - &omap3_vdd2_info, +static struct voltagedomain omap3_voltdm_mpu = { + .name = "mpu", + .vdd = &omap3_vdd1_info, }; -/* OMAP3 specific voltage init functions */ -static int __init omap3xxx_voltage_early_init(void) -{ - if (!cpu_is_omap34xx()) - return 0; +static struct voltagedomain omap3_voltdm_core = { + .name = "core", + .vdd = &omap3_vdd2_info, +}; +static struct voltagedomain *voltagedomains_omap3[] __initdata = { + &omap3_voltdm_mpu, + &omap3_voltdm_core, + NULL, +}; + +void __init omap3xxx_voltagedomains_init(void) +{ /* * XXX Will depend on the process, validation, and binning * for the currently-running IC @@ -89,7 +89,5 @@ static int __init omap3xxx_voltage_early_init(void) omap3_vdd2_info.volt_data = omap34xx_vddcore_volt_data; } - return omap_voltage_early_init(omap3_vdd_info, - ARRAY_SIZE(omap3_vdd_info)); + voltdm_init(voltagedomains_omap3); }; -core_initcall(omap3xxx_voltage_early_init); diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c b/arch/arm/mach-omap2/voltagedomains44xx_data.c index 64dc265aa2ad..245fdf9cb4a5 100644 --- a/arch/arm/mach-omap2/voltagedomains44xx_data.c +++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c @@ -42,9 +42,6 @@ static struct omap_vdd_info omap4_vdd_mpu_info = { .vp_data = &omap4_vp_mpu_data, .vc_data = &omap4_vc_mpu_data, .vfsm = &omap4_vdd_mpu_vfsm_data, - .voltdm = { - .name = "mpu", - }, }; static const struct omap_vfsm_instance_data omap4_vdd_iva_vfsm_data = { @@ -57,9 +54,6 @@ static struct omap_vdd_info omap4_vdd_iva_info = { .vp_data = &omap4_vp_iva_data, .vc_data = &omap4_vc_iva_data, .vfsm = &omap4_vdd_iva_vfsm_data, - .voltdm = { - .name = "iva", - }, }; static const struct omap_vfsm_instance_data omap4_vdd_core_vfsm_data = { @@ -72,24 +66,32 @@ static struct omap_vdd_info omap4_vdd_core_info = { .vp_data = &omap4_vp_core_data, .vc_data = &omap4_vc_core_data, .vfsm = &omap4_vdd_core_vfsm_data, - .voltdm = { - .name = "core", - }, }; -/* OMAP4 VDD structures */ -static struct omap_vdd_info *omap4_vdd_info[] = { - &omap4_vdd_mpu_info, - &omap4_vdd_iva_info, - &omap4_vdd_core_info, +static struct voltagedomain omap4_voltdm_mpu = { + .name = "mpu", + .vdd = &omap4_vdd_mpu_info, }; -/* OMAP4 specific voltage init functions */ -static int __init omap44xx_voltage_early_init(void) -{ - if (!cpu_is_omap44xx()) - return 0; +static struct voltagedomain omap4_voltdm_iva = { + .name = "iva", + .vdd = &omap4_vdd_iva_info, +}; + +static struct voltagedomain omap4_voltdm_core = { + .name = "core", + .vdd = &omap4_vdd_core_info, +}; +static struct voltagedomain *voltagedomains_omap4[] __initdata = { + &omap4_voltdm_mpu, + &omap4_voltdm_iva, + &omap4_voltdm_core, + NULL, +}; + +void __init omap44xx_voltagedomains_init(void) +{ /* * XXX Will depend on the process, validation, and binning * for the currently-running IC @@ -98,7 +100,5 @@ static int __init omap44xx_voltage_early_init(void) omap4_vdd_iva_info.volt_data = omap44xx_vdd_iva_volt_data; omap4_vdd_core_info.volt_data = omap44xx_vdd_core_volt_data; - return omap_voltage_early_init(omap4_vdd_info, - ARRAY_SIZE(omap4_vdd_info)); + voltdm_init(voltagedomains_omap4); }; -core_initcall(omap44xx_voltage_early_init); -- cgit v1.2.3 From 280a72750535aaf69833bda13ab8912aa5eb71e3 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 23 Mar 2011 11:18:08 -0700 Subject: OMAP3: voltage: rename "mpu" voltagedomain to "mpu_iva" This voltage domain (a.k.a. VDD1) contains both the MPU and the IVA, so rename appropriately. Also fixup any users of the "mpu" name to use "mpu_iva" Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 4 ++-- arch/arm/mach-omap2/omap_twl.c | 2 +- arch/arm/mach-omap2/pm.c | 2 +- arch/arm/mach-omap2/voltagedomains3xxx_data.c | 2 +- 4 files changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 25bf43b5a4ec..59fdb9f5e9ed 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -2597,7 +2597,7 @@ static struct omap_hwmod omap34xx_sr1_hwmod = { .name = "sr1_hwmod", .class = &omap34xx_smartreflex_hwmod_class, .main_clk = "sr1_fck", - .vdd_name = "mpu", + .vdd_name = "mpu_iva", .prcm = { .omap2 = { .prcm_reg_id = 1, @@ -2619,7 +2619,7 @@ static struct omap_hwmod omap36xx_sr1_hwmod = { .name = "sr1_hwmod", .class = &omap36xx_smartreflex_hwmod_class, .main_clk = "sr1_fck", - .vdd_name = "mpu", + .vdd_name = "mpu_iva", .prcm = { .omap2 = { .prcm_reg_id = 1, diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c index fcd2f62fbdc3..760487bcfca6 100644 --- a/arch/arm/mach-omap2/omap_twl.c +++ b/arch/arm/mach-omap2/omap_twl.c @@ -288,7 +288,7 @@ int __init omap3_twl_init(void) if (!twl_sr_enable_autoinit) omap3_twl_set_sr_bit(true); - voltdm = voltdm_lookup("mpu"); + voltdm = voltdm_lookup("mpu_iva"); omap_voltage_register_pmic(voltdm, &omap3_mpu_volt_info); voltdm = voltdm_lookup("core"); diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index c10f8f6ae6f6..1e1fedaabb55 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -226,7 +226,7 @@ static void __init omap3_init_voltages(void) if (!cpu_is_omap34xx()) return; - omap2_set_init_voltage("mpu", "dpll1_ck", mpu_dev); + omap2_set_init_voltage("mpu_iva", "dpll1_ck", mpu_dev); omap2_set_init_voltage("core", "l3_ick", l3_dev); } diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c index 4bee412b673b..2167ef4079aa 100644 --- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c +++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c @@ -60,7 +60,7 @@ static struct omap_vdd_info omap3_vdd2_info = { }; static struct voltagedomain omap3_voltdm_mpu = { - .name = "mpu", + .name = "mpu_iva", .vdd = &omap3_vdd1_info, }; -- cgit v1.2.3 From ace19ffa9a580c7b3d2a7cd4bb9fda6071394d25 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 23 Mar 2011 13:30:33 -0700 Subject: OMAP3: voltagedomain data: add wakeup domain Add wakeup voltage domain so that the wakeup powerdomain can have an associated powerdomain. Note that the scalable flat is not set for the this voltagedomain, so it will not be fully initialized like scalable voltage domains. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/voltagedomains3xxx_data.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c index 2167ef4079aa..42d0b112978b 100644 --- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c +++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c @@ -69,9 +69,14 @@ static struct voltagedomain omap3_voltdm_core = { .vdd = &omap3_vdd2_info, }; +static struct voltagedomain omap3_voltdm_wkup = { + .name = "wakeup", +}; + static struct voltagedomain *voltagedomains_omap3[] __initdata = { &omap3_voltdm_mpu, &omap3_voltdm_core, + &omap3_voltdm_wkup, NULL, }; -- cgit v1.2.3 From 37efca7e9deacf3c11bda82df5b7594f098daa69 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 23 Mar 2011 17:00:21 -0700 Subject: OMAP3+: voltage: add scalable flag to voltagedomain Add a 'bool scalable' flag to the struct powerdomain and set it for the scalable domains on OMAP3 and OMAP4. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/voltage.c | 3 +++ arch/arm/mach-omap2/voltage.h | 2 ++ arch/arm/mach-omap2/voltagedomains3xxx_data.c | 2 ++ arch/arm/mach-omap2/voltagedomains44xx_data.c | 3 +++ 4 files changed, 10 insertions(+) diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index 4f0361a23ff6..48a2593878c6 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -1054,6 +1054,9 @@ int __init omap_voltage_late_init(void) pr_err("%s: Unable to create voltage debugfs main dir\n", __func__); list_for_each_entry(voltdm, &voltdm_list, node) { + if (!voltdm->scalable) + continue; + if (voltdm->vdd) { if (omap_vdd_data_configure(voltdm)) continue; diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h index 544029896265..25cfb5c8f06b 100644 --- a/arch/arm/mach-omap2/voltage.h +++ b/arch/arm/mach-omap2/voltage.h @@ -53,11 +53,13 @@ struct omap_vfsm_instance_data { /** * struct voltagedomain - omap voltage domain global structure. * @name: Name of the voltage domain which can be used as a unique identifier. + * @scalable: Whether or not this voltage domain is scalable * @node: list_head linking all voltage domains * @vdd: to be removed */ struct voltagedomain { char *name; + bool scalable; struct list_head node; struct omap_vdd_info *vdd; }; diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c index 42d0b112978b..d7e1052d2cdb 100644 --- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c +++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c @@ -61,11 +61,13 @@ static struct omap_vdd_info omap3_vdd2_info = { static struct voltagedomain omap3_voltdm_mpu = { .name = "mpu_iva", + .scalable = true, .vdd = &omap3_vdd1_info, }; static struct voltagedomain omap3_voltdm_core = { .name = "core", + .scalable = true, .vdd = &omap3_vdd2_info, }; diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c b/arch/arm/mach-omap2/voltagedomains44xx_data.c index 245fdf9cb4a5..95e1ce5822ca 100644 --- a/arch/arm/mach-omap2/voltagedomains44xx_data.c +++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c @@ -70,16 +70,19 @@ static struct omap_vdd_info omap4_vdd_core_info = { static struct voltagedomain omap4_voltdm_mpu = { .name = "mpu", + .scalable = true, .vdd = &omap4_vdd_mpu_info, }; static struct voltagedomain omap4_voltdm_iva = { .name = "iva", + .scalable = true, .vdd = &omap4_vdd_iva_info, }; static struct voltagedomain omap4_voltdm_core = { .name = "core", + .scalable = true, .vdd = &omap4_vdd_core_info, }; -- cgit v1.2.3 From 8f1bec246c44d936a02cc6b781bfd9ba670d7e45 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 23 Mar 2011 07:22:23 -0700 Subject: OMAP2+: powerdomain: add voltagedomain to struct powerdomain Each powerdomain is associated with a voltage domain. Add an entry to struct powerdomain where the enclosing voltagedomain can be referenced. Modeled after similar relationship between clockdomains and powerdomains. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/powerdomain.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h index 8febd84e5e31..898d4fc0d160 100644 --- a/arch/arm/mach-omap2/powerdomain.h +++ b/arch/arm/mach-omap2/powerdomain.h @@ -24,6 +24,8 @@ #include +#include "voltage.h" + /* Powerdomain basic power states */ #define PWRDM_POWER_OFF 0x0 #define PWRDM_POWER_RET 0x1 @@ -78,6 +80,7 @@ struct powerdomain; /** * struct powerdomain - OMAP powerdomain * @name: Powerdomain name + * @voltdm: voltagedomain containing this powerdomain * @prcm_offs: the address offset from CM_BASE/PRM_BASE * @prcm_partition: (OMAP4 only) the PRCM partition ID containing @prcm_offs * @pwrsts: Possible powerdomain power states @@ -97,6 +100,10 @@ struct powerdomain; */ struct powerdomain { const char *name; + union { + const char *name; + struct voltagedomain *ptr; + } voltdm; const s16 prcm_offs; const u8 pwrsts; const u8 pwrsts_logic_ret; -- cgit v1.2.3 From aae030fa329307895eb935b057a72b12c6bd678b Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 23 Mar 2011 16:09:41 -0700 Subject: OMAP2: add voltage domains and connect to powerdomains Create basic voltagedomains for OMAP2 and associate OMAP2 powerdomains with the newly created voltage domains. While here, update copyright on powerdomain data to 2011. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/Makefile | 3 ++- arch/arm/mach-omap2/io.c | 2 ++ arch/arm/mach-omap2/powerdomain2xxx_3xxx.c | 2 +- arch/arm/mach-omap2/powerdomains2xxx_data.c | 4 ++++ arch/arm/mach-omap2/voltage.h | 1 + arch/arm/mach-omap2/voltagedomains2xxx_data.c | 32 +++++++++++++++++++++++++++ 6 files changed, 42 insertions(+), 2 deletions(-) create mode 100644 arch/arm/mach-omap2/voltagedomains2xxx_data.c diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 5a6fe735b566..cce9bc300af5 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -91,7 +91,8 @@ obj-$(CONFIG_ARCH_OMAP4) += prcm.o cm2xxx_3xxx.o cminst44xx.o \ # OMAP voltage domains ifeq ($(CONFIG_PM),y) voltagedomain-common := voltage.o -obj-$(CONFIG_ARCH_OMAP2) += $(voltagedomain-common) +obj-$(CONFIG_ARCH_OMAP2) += $(voltagedomain-common) \ + voltagedomains2xxx_data.o obj-$(CONFIG_ARCH_OMAP3) += $(voltagedomain-common) \ voltagedomains3xxx_data.o obj-$(CONFIG_ARCH_OMAP4) += $(voltagedomain-common) \ diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 7c36fde5dd62..7802e84f42c7 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -342,10 +342,12 @@ void __init omap2_init_common_infrastructure(void) u8 postsetup_state; if (cpu_is_omap242x()) { + omap2xxx_voltagedomains_init(); omap242x_powerdomains_init(); omap242x_clockdomains_init(); omap2420_hwmod_init(); } else if (cpu_is_omap243x()) { + omap2xxx_voltagedomains_init(); omap243x_powerdomains_init(); omap243x_clockdomains_init(); omap2430_hwmod_init(); diff --git a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c index cf600e22bf8e..6a17e4ca1d79 100644 --- a/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c +++ b/arch/arm/mach-omap2/powerdomain2xxx_3xxx.c @@ -1,7 +1,7 @@ /* * OMAP2 and OMAP3 powerdomain control * - * Copyright (C) 2009-2010 Texas Instruments, Inc. + * Copyright (C) 2009-2011 Texas Instruments, Inc. * Copyright (C) 2007-2009 Nokia Corporation * * Derived from mach-omap2/powerdomain.c written by Paul Walmsley diff --git a/arch/arm/mach-omap2/powerdomains2xxx_data.c b/arch/arm/mach-omap2/powerdomains2xxx_data.c index bb4394e3b621..2385c1f009ee 100644 --- a/arch/arm/mach-omap2/powerdomains2xxx_data.c +++ b/arch/arm/mach-omap2/powerdomains2xxx_data.c @@ -37,6 +37,7 @@ static struct powerdomain dsp_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_ON, }, + .voltdm = { .name = "core" }, }; static struct powerdomain mpu_24xx_pwrdm = { @@ -51,6 +52,7 @@ static struct powerdomain mpu_24xx_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_ON, }, + .voltdm = { .name = "core" }, }; static struct powerdomain core_24xx_pwrdm = { @@ -68,6 +70,7 @@ static struct powerdomain core_24xx_pwrdm = { [1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */ [2] = PWRSTS_OFF_RET_ON, /* MEM3ONSTATE */ }, + .voltdm = { .name = "core" }, }; @@ -89,6 +92,7 @@ static struct powerdomain mdm_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_ON, /* MEMONSTATE */ }, + .voltdm = { .name = "core" }, }; /* diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h index 25cfb5c8f06b..cacd76e1e2c3 100644 --- a/arch/arm/mach-omap2/voltage.h +++ b/arch/arm/mach-omap2/voltage.h @@ -180,6 +180,7 @@ static inline int omap_voltage_late_init(void) } #endif +extern void omap2xxx_voltagedomains_init(void); extern void omap3xxx_voltagedomains_init(void); extern void omap44xx_voltagedomains_init(void); diff --git a/arch/arm/mach-omap2/voltagedomains2xxx_data.c b/arch/arm/mach-omap2/voltagedomains2xxx_data.c new file mode 100644 index 000000000000..7a41349981e5 --- /dev/null +++ b/arch/arm/mach-omap2/voltagedomains2xxx_data.c @@ -0,0 +1,32 @@ +/* + * OMAP3 voltage domain data + * + * Copyright (C) 2011 Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include + +#include "voltage.h" + +static struct voltagedomain omap2_voltdm_core = { + .name = "core", +}; + +static struct voltagedomain omap2_voltdm_wkup = { + .name = "wakeup", +}; + +static struct voltagedomain *voltagedomains_omap2[] __initdata = { + &omap2_voltdm_core, + &omap2_voltdm_wkup, + NULL, +}; + +void __init omap2xxx_voltagedomains_init(void) +{ + voltdm_init(voltagedomains_omap2); +} -- cgit v1.2.3 From da03ce65b5431245b9cd20db3edaaa6b9f5c8dc1 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Fri, 18 Mar 2011 14:12:18 -0700 Subject: OMAP3: powerdomain data: add voltage domains Add voltage domain name to indicate which voltagedomain each powerdomain is in. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c | 2 ++ arch/arm/mach-omap2/powerdomains3xxx_data.c | 16 ++++++++++++++++ 2 files changed, 18 insertions(+) diff --git a/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c b/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c index bf30483d5cb0..d3a5399091ad 100644 --- a/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c +++ b/arch/arm/mach-omap2/powerdomains2xxx_3xxx_data.c @@ -54,10 +54,12 @@ struct powerdomain gfx_omap2_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_ON, /* MEMONSTATE */ }, + .voltdm = { .name = "core" }, }; struct powerdomain wkup_omap2_pwrdm = { .name = "wkup_pwrdm", .prcm_offs = WKUP_MOD, .pwrsts = PWRSTS_ON, + .voltdm = { .name = "wakeup" }, }; diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c index e4f3a7d6ecfc..8ef26daeed68 100644 --- a/arch/arm/mach-omap2/powerdomains3xxx_data.c +++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c @@ -51,6 +51,7 @@ static struct powerdomain iva2_pwrdm = { [2] = PWRSTS_OFF_ON, [3] = PWRSTS_ON, }, + .voltdm = { .name = "mpu_iva" }, }; static struct powerdomain mpu_3xxx_pwrdm = { @@ -66,6 +67,7 @@ static struct powerdomain mpu_3xxx_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_OFF_ON, }, + .voltdm = { .name = "mpu_iva" }, }; /* @@ -92,6 +94,7 @@ static struct powerdomain core_3xxx_pre_es3_1_pwrdm = { [0] = PWRSTS_OFF_RET_ON, /* MEM1ONSTATE */ [1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */ }, + .voltdm = { .name = "core" }, }; static struct powerdomain core_3xxx_es3_1_pwrdm = { @@ -113,6 +116,7 @@ static struct powerdomain core_3xxx_es3_1_pwrdm = { [0] = PWRSTS_OFF_RET_ON, /* MEM1ONSTATE */ [1] = PWRSTS_OFF_RET_ON, /* MEM2ONSTATE */ }, + .voltdm = { .name = "core" }, }; static struct powerdomain dss_pwrdm = { @@ -127,6 +131,7 @@ static struct powerdomain dss_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_ON, /* MEMONSTATE */ }, + .voltdm = { .name = "core" }, }; /* @@ -147,6 +152,7 @@ static struct powerdomain sgx_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_ON, /* MEMONSTATE */ }, + .voltdm = { .name = "core" }, }; static struct powerdomain cam_pwrdm = { @@ -161,6 +167,7 @@ static struct powerdomain cam_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_ON, /* MEMONSTATE */ }, + .voltdm = { .name = "core" }, }; static struct powerdomain per_pwrdm = { @@ -175,11 +182,13 @@ static struct powerdomain per_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_ON, /* MEMONSTATE */ }, + .voltdm = { .name = "core" }, }; static struct powerdomain emu_pwrdm = { .name = "emu_pwrdm", .prcm_offs = OMAP3430_EMU_MOD, + .voltdm = { .name = "core" }, }; static struct powerdomain neon_pwrdm = { @@ -187,6 +196,7 @@ static struct powerdomain neon_pwrdm = { .prcm_offs = OMAP3430_NEON_MOD, .pwrsts = PWRSTS_OFF_RET_ON, .pwrsts_logic_ret = PWRSTS_RET, + .voltdm = { .name = "mpu_iva" }, }; static struct powerdomain usbhost_pwrdm = { @@ -208,31 +218,37 @@ static struct powerdomain usbhost_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_ON, /* MEMONSTATE */ }, + .voltdm = { .name = "core" }, }; static struct powerdomain dpll1_pwrdm = { .name = "dpll1_pwrdm", .prcm_offs = MPU_MOD, + .voltdm = { .name = "mpu_iva" }, }; static struct powerdomain dpll2_pwrdm = { .name = "dpll2_pwrdm", .prcm_offs = OMAP3430_IVA2_MOD, + .voltdm = { .name = "mpu_iva" }, }; static struct powerdomain dpll3_pwrdm = { .name = "dpll3_pwrdm", .prcm_offs = PLL_MOD, + .voltdm = { .name = "core" }, }; static struct powerdomain dpll4_pwrdm = { .name = "dpll4_pwrdm", .prcm_offs = PLL_MOD, + .voltdm = { .name = "core" }, }; static struct powerdomain dpll5_pwrdm = { .name = "dpll5_pwrdm", .prcm_offs = PLL_MOD, + .voltdm = { .name = "core" }, }; /* As powerdomains are added or removed above, this list must also be changed */ -- cgit v1.2.3 From 7e1b94059cea39218071fdb78c4075b83d52e222 Mon Sep 17 00:00:00 2001 From: Benoit Cousson Date: Mon, 21 Mar 2011 12:11:54 +0100 Subject: OMAP4: powerdomain data: add voltage domains Add voltage domain name to indicate which voltagedomain each powerdomain is in. The fixed voltage domain like ldo_wakeup for emu and wkup power domain is added too. Signed-off-by: Benoit Cousson Cc: Paul Walmsley [khilman@ti.com]: renamed wakeup domain: s/ldo_wakeup/wakeup/ Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/powerdomains44xx_data.c | 16 ++++++++++++++++ arch/arm/mach-omap2/voltagedomains44xx_data.c | 5 +++++ 2 files changed, 21 insertions(+) diff --git a/arch/arm/mach-omap2/powerdomains44xx_data.c b/arch/arm/mach-omap2/powerdomains44xx_data.c index cbce0c9069cd..704664c0e259 100644 --- a/arch/arm/mach-omap2/powerdomains44xx_data.c +++ b/arch/arm/mach-omap2/powerdomains44xx_data.c @@ -33,6 +33,7 @@ /* core_44xx_pwrdm: CORE power domain */ static struct powerdomain core_44xx_pwrdm = { .name = "core_pwrdm", + .voltdm = { .name = "core" }, .prcm_offs = OMAP4430_PRM_CORE_INST, .prcm_partition = OMAP4430_PRM_PARTITION, .pwrsts = PWRSTS_RET_ON, @@ -58,6 +59,7 @@ static struct powerdomain core_44xx_pwrdm = { /* gfx_44xx_pwrdm: 3D accelerator power domain */ static struct powerdomain gfx_44xx_pwrdm = { .name = "gfx_pwrdm", + .voltdm = { .name = "core" }, .prcm_offs = OMAP4430_PRM_GFX_INST, .prcm_partition = OMAP4430_PRM_PARTITION, .pwrsts = PWRSTS_OFF_ON, @@ -74,6 +76,7 @@ static struct powerdomain gfx_44xx_pwrdm = { /* abe_44xx_pwrdm: Audio back end power domain */ static struct powerdomain abe_44xx_pwrdm = { .name = "abe_pwrdm", + .voltdm = { .name = "iva" }, .prcm_offs = OMAP4430_PRM_ABE_INST, .prcm_partition = OMAP4430_PRM_PARTITION, .pwrsts = PWRSTS_OFF_RET_ON, @@ -93,6 +96,7 @@ static struct powerdomain abe_44xx_pwrdm = { /* dss_44xx_pwrdm: Display subsystem power domain */ static struct powerdomain dss_44xx_pwrdm = { .name = "dss_pwrdm", + .voltdm = { .name = "core" }, .prcm_offs = OMAP4430_PRM_DSS_INST, .prcm_partition = OMAP4430_PRM_PARTITION, .pwrsts = PWRSTS_OFF_RET_ON, @@ -110,6 +114,7 @@ static struct powerdomain dss_44xx_pwrdm = { /* tesla_44xx_pwrdm: Tesla processor power domain */ static struct powerdomain tesla_44xx_pwrdm = { .name = "tesla_pwrdm", + .voltdm = { .name = "iva" }, .prcm_offs = OMAP4430_PRM_TESLA_INST, .prcm_partition = OMAP4430_PRM_PARTITION, .pwrsts = PWRSTS_OFF_RET_ON, @@ -131,6 +136,7 @@ static struct powerdomain tesla_44xx_pwrdm = { /* wkup_44xx_pwrdm: Wake-up power domain */ static struct powerdomain wkup_44xx_pwrdm = { .name = "wkup_pwrdm", + .voltdm = { .name = "wakeup" }, .prcm_offs = OMAP4430_PRM_WKUP_INST, .prcm_partition = OMAP4430_PRM_PARTITION, .pwrsts = PWRSTS_ON, @@ -146,6 +152,7 @@ static struct powerdomain wkup_44xx_pwrdm = { /* cpu0_44xx_pwrdm: MPU0 processor and Neon coprocessor power domain */ static struct powerdomain cpu0_44xx_pwrdm = { .name = "cpu0_pwrdm", + .voltdm = { .name = "mpu" }, .prcm_offs = OMAP4430_PRCM_MPU_CPU0_INST, .prcm_partition = OMAP4430_PRCM_MPU_PARTITION, .pwrsts = PWRSTS_OFF_RET_ON, @@ -162,6 +169,7 @@ static struct powerdomain cpu0_44xx_pwrdm = { /* cpu1_44xx_pwrdm: MPU1 processor and Neon coprocessor power domain */ static struct powerdomain cpu1_44xx_pwrdm = { .name = "cpu1_pwrdm", + .voltdm = { .name = "mpu" }, .prcm_offs = OMAP4430_PRCM_MPU_CPU1_INST, .prcm_partition = OMAP4430_PRCM_MPU_PARTITION, .pwrsts = PWRSTS_OFF_RET_ON, @@ -178,6 +186,7 @@ static struct powerdomain cpu1_44xx_pwrdm = { /* emu_44xx_pwrdm: Emulation power domain */ static struct powerdomain emu_44xx_pwrdm = { .name = "emu_pwrdm", + .voltdm = { .name = "wakeup" }, .prcm_offs = OMAP4430_PRM_EMU_INST, .prcm_partition = OMAP4430_PRM_PARTITION, .pwrsts = PWRSTS_OFF_ON, @@ -193,6 +202,7 @@ static struct powerdomain emu_44xx_pwrdm = { /* mpu_44xx_pwrdm: Modena processor and the Neon coprocessor power domain */ static struct powerdomain mpu_44xx_pwrdm = { .name = "mpu_pwrdm", + .voltdm = { .name = "mpu" }, .prcm_offs = OMAP4430_PRM_MPU_INST, .prcm_partition = OMAP4430_PRM_PARTITION, .pwrsts = PWRSTS_RET_ON, @@ -213,6 +223,7 @@ static struct powerdomain mpu_44xx_pwrdm = { /* ivahd_44xx_pwrdm: IVA-HD power domain */ static struct powerdomain ivahd_44xx_pwrdm = { .name = "ivahd_pwrdm", + .voltdm = { .name = "iva" }, .prcm_offs = OMAP4430_PRM_IVAHD_INST, .prcm_partition = OMAP4430_PRM_PARTITION, .pwrsts = PWRSTS_OFF_RET_ON, @@ -236,6 +247,7 @@ static struct powerdomain ivahd_44xx_pwrdm = { /* cam_44xx_pwrdm: Camera subsystem power domain */ static struct powerdomain cam_44xx_pwrdm = { .name = "cam_pwrdm", + .voltdm = { .name = "core" }, .prcm_offs = OMAP4430_PRM_CAM_INST, .prcm_partition = OMAP4430_PRM_PARTITION, .pwrsts = PWRSTS_OFF_ON, @@ -252,6 +264,7 @@ static struct powerdomain cam_44xx_pwrdm = { /* l3init_44xx_pwrdm: L3 initators pheripherals power domain */ static struct powerdomain l3init_44xx_pwrdm = { .name = "l3init_pwrdm", + .voltdm = { .name = "core" }, .prcm_offs = OMAP4430_PRM_L3INIT_INST, .prcm_partition = OMAP4430_PRM_PARTITION, .pwrsts = PWRSTS_RET_ON, @@ -269,6 +282,7 @@ static struct powerdomain l3init_44xx_pwrdm = { /* l4per_44xx_pwrdm: Target peripherals power domain */ static struct powerdomain l4per_44xx_pwrdm = { .name = "l4per_pwrdm", + .voltdm = { .name = "core" }, .prcm_offs = OMAP4430_PRM_L4PER_INST, .prcm_partition = OMAP4430_PRM_PARTITION, .pwrsts = PWRSTS_RET_ON, @@ -291,6 +305,7 @@ static struct powerdomain l4per_44xx_pwrdm = { */ static struct powerdomain always_on_core_44xx_pwrdm = { .name = "always_on_core_pwrdm", + .voltdm = { .name = "core" }, .prcm_offs = OMAP4430_PRM_ALWAYS_ON_INST, .prcm_partition = OMAP4430_PRM_PARTITION, .pwrsts = PWRSTS_ON, @@ -299,6 +314,7 @@ static struct powerdomain always_on_core_44xx_pwrdm = { /* cefuse_44xx_pwrdm: Customer efuse controller power domain */ static struct powerdomain cefuse_44xx_pwrdm = { .name = "cefuse_pwrdm", + .voltdm = { .name = "core" }, .prcm_offs = OMAP4430_PRM_CEFUSE_INST, .prcm_partition = OMAP4430_PRM_PARTITION, .pwrsts = PWRSTS_OFF_ON, diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c b/arch/arm/mach-omap2/voltagedomains44xx_data.c index 95e1ce5822ca..9a17b5ebf665 100644 --- a/arch/arm/mach-omap2/voltagedomains44xx_data.c +++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c @@ -86,10 +86,15 @@ static struct voltagedomain omap4_voltdm_core = { .vdd = &omap4_vdd_core_info, }; +static struct voltagedomain omap4_voltdm_wkup = { + .name = "wakeup", +}; + static struct voltagedomain *voltagedomains_omap4[] __initdata = { &omap4_voltdm_mpu, &omap4_voltdm_iva, &omap4_voltdm_core, + &omap4_voltdm_wkup, NULL, }; -- cgit v1.2.3 From 048a7034f1044e69868df70bff32d8d67974e1b8 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 16 Mar 2011 15:52:47 -0700 Subject: OMAP2+: powerdomain: add voltage domain lookup during register When a powerdomain is registered, lookup the voltage domain by name and keep a pointer to the containing voltagedomain in the powerdomain structure. Modeled after similar method between powerdomain and clockdomain layers. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/powerdomain.c | 21 +++++++++++++++++++++ arch/arm/mach-omap2/powerdomain.h | 1 + arch/arm/mach-omap2/voltage.h | 1 + 3 files changed, 23 insertions(+) diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 896cb4c5eb1a..984457d612b7 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -77,6 +77,7 @@ static struct powerdomain *_pwrdm_lookup(const char *name) static int _pwrdm_register(struct powerdomain *pwrdm) { int i; + struct voltagedomain *voltdm; if (!pwrdm || !pwrdm->name) return -EINVAL; @@ -91,6 +92,14 @@ static int _pwrdm_register(struct powerdomain *pwrdm) if (_pwrdm_lookup(pwrdm->name)) return -EEXIST; + voltdm = voltdm_lookup(pwrdm->voltdm.name); + if (!voltdm) { + pr_err("powerdomain: %s: voltagedomain %s does not exist\n", + pwrdm->name, pwrdm->voltdm.name); + return -EINVAL; + } + pwrdm->voltdm.ptr = voltdm; + list_add(&pwrdm->node, &pwrdm_list); /* Initialize the powerdomain's state counter */ @@ -426,6 +435,18 @@ int pwrdm_for_each_clkdm(struct powerdomain *pwrdm, return ret; } +/** + * pwrdm_get_voltdm - return a ptr to the voltdm that this pwrdm resides in + * @pwrdm: struct powerdomain * + * + * Return a pointer to the struct voltageomain that the specified powerdomain + * @pwrdm exists in. + */ +struct voltagedomain *pwrdm_get_voltdm(struct powerdomain *pwrdm) +{ + return pwrdm->voltdm.ptr; +} + /** * pwrdm_get_mem_bank_count - get number of memory banks in this powerdomain * @pwrdm: struct powerdomain * diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h index 898d4fc0d160..d8a7f914d9b3 100644 --- a/arch/arm/mach-omap2/powerdomain.h +++ b/arch/arm/mach-omap2/powerdomain.h @@ -183,6 +183,7 @@ int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm); int pwrdm_for_each_clkdm(struct powerdomain *pwrdm, int (*fn)(struct powerdomain *pwrdm, struct clockdomain *clkdm)); +struct voltagedomain *pwrdm_get_voltdm(struct powerdomain *pwrdm); int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm); diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h index cacd76e1e2c3..966aa8880345 100644 --- a/arch/arm/mach-omap2/voltage.h +++ b/arch/arm/mach-omap2/voltage.h @@ -186,4 +186,5 @@ extern void omap44xx_voltagedomains_init(void); struct voltagedomain *voltdm_lookup(const char *name); void voltdm_init(struct voltagedomain **voltdm_list); +int voltdm_add_pwrdm(struct voltagedomain *voltdm, struct powerdomain *pwrdm); #endif -- cgit v1.2.3 From e69c22b1459068f15e56e48b4b6953cc3f566c79 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 16 Mar 2011 16:13:15 -0700 Subject: OMAP2+: voltage: keep track of powerdomains in each voltagedomain When a powerdomain is registered and it has an associated voltage domain, add the powerdomain to the voltagedomain using voltdm_add_pwrdm(). Also add voltagedomain iterator helper functions to iterate over all registered voltagedomains and all powerdomains associated with a voltagedomain. Modeled after a similar relationship between clockdomains and powerdomains. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/powerdomain.c | 2 + arch/arm/mach-omap2/powerdomain.h | 2 + arch/arm/mach-omap2/voltage.c | 80 +++++++++++++++++++++++++++++++++++++++ arch/arm/mach-omap2/voltage.h | 9 +++++ 4 files changed, 93 insertions(+) diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 984457d612b7..5164d587ef52 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -99,6 +99,8 @@ static int _pwrdm_register(struct powerdomain *pwrdm) return -EINVAL; } pwrdm->voltdm.ptr = voltdm; + INIT_LIST_HEAD(&pwrdm->voltdm_node); + voltdm_add_pwrdm(voltdm, pwrdm); list_add(&pwrdm->node, &pwrdm_list); diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h index d8a7f914d9b3..42e6dd8f2a78 100644 --- a/arch/arm/mach-omap2/powerdomain.h +++ b/arch/arm/mach-omap2/powerdomain.h @@ -91,6 +91,7 @@ struct powerdomain; * @pwrsts_mem_on: Possible memory bank pwrstates when pwrdm in ON * @pwrdm_clkdms: Clockdomains in this powerdomain * @node: list_head linking all powerdomains + * @voltdm_node: list_head linking all powerdomains in a voltagedomain * @state: * @state_counter: * @timer: @@ -114,6 +115,7 @@ struct powerdomain { const u8 prcm_partition; struct clockdomain *pwrdm_clkdms[PWRDM_MAX_CLKDMS]; struct list_head node; + struct list_head voltdm_node; int state; unsigned state_counter[PWRDM_MAX_PWRSTS]; unsigned ret_logic_off_counter; diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index 48a2593878c6..1e5c1225e2be 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -36,6 +36,7 @@ #include "control.h" #include "voltage.h" +#include "powerdomain.h" #include "vc.h" #include "vp.h" @@ -1085,11 +1086,90 @@ static struct voltagedomain *_voltdm_lookup(const char *name) return voltdm; } +/** + * voltdm_add_pwrdm - add a powerdomain to a voltagedomain + * @voltdm: struct voltagedomain * to add the powerdomain to + * @pwrdm: struct powerdomain * to associate with a voltagedomain + * + * Associate the powerdomain @pwrdm with a voltagedomain @voltdm. This + * enables the use of voltdm_for_each_pwrdm(). Returns -EINVAL if + * presented with invalid pointers; -ENOMEM if memory could not be allocated; + * or 0 upon success. + */ +int voltdm_add_pwrdm(struct voltagedomain *voltdm, struct powerdomain *pwrdm) +{ + if (!voltdm || !pwrdm) + return -EINVAL; + + pr_debug("voltagedomain: associating powerdomain %s with voltagedomain " + "%s\n", pwrdm->name, voltdm->name); + + list_add(&pwrdm->voltdm_node, &voltdm->pwrdm_list); + + return 0; +} + +/** + * voltdm_for_each_pwrdm - call function for each pwrdm in a voltdm + * @voltdm: struct voltagedomain * to iterate over + * @fn: callback function * + * + * Call the supplied function @fn for each powerdomain in the + * voltagedomain @voltdm. Returns -EINVAL if presented with invalid + * pointers; or passes along the last return value of the callback + * function, which should be 0 for success or anything else to + * indicate failure. + */ +int voltdm_for_each_pwrdm(struct voltagedomain *voltdm, + int (*fn)(struct voltagedomain *voltdm, + struct powerdomain *pwrdm)) +{ + struct powerdomain *pwrdm; + int ret = 0; + + if (!fn) + return -EINVAL; + + list_for_each_entry(pwrdm, &voltdm->pwrdm_list, voltdm_node) + ret = (*fn)(voltdm, pwrdm); + + return ret; +} + +/** + * voltdm_for_each - call function on each registered voltagedomain + * @fn: callback function * + * + * Call the supplied function @fn for each registered voltagedomain. + * The callback function @fn can return anything but 0 to bail out + * early from the iterator. Returns the last return value of the + * callback function, which should be 0 for success or anything else + * to indicate failure; or -EINVAL if the function pointer is null. + */ +int voltdm_for_each(int (*fn)(struct voltagedomain *voltdm, void *user), + void *user) +{ + struct voltagedomain *temp_voltdm; + int ret = 0; + + if (!fn) + return -EINVAL; + + list_for_each_entry(temp_voltdm, &voltdm_list, node) { + ret = (*fn)(temp_voltdm, user); + if (ret) + break; + } + + return ret; +} + static int _voltdm_register(struct voltagedomain *voltdm) { if (!voltdm || !voltdm->name) return -EINVAL; + INIT_LIST_HEAD(&voltdm->pwrdm_list); list_add(&voltdm->node, &voltdm_list); pr_debug("voltagedomain: registered %s\n", voltdm->name); diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h index 966aa8880345..5063ab33af7b 100644 --- a/arch/arm/mach-omap2/voltage.h +++ b/arch/arm/mach-omap2/voltage.h @@ -19,6 +19,8 @@ #include "vc.h" #include "vp.h" +struct powerdomain; + /* XXX document */ #define VOLTSCALE_VPFORCEUPDATE 1 #define VOLTSCALE_VCBYPASS 2 @@ -55,12 +57,14 @@ struct omap_vfsm_instance_data { * @name: Name of the voltage domain which can be used as a unique identifier. * @scalable: Whether or not this voltage domain is scalable * @node: list_head linking all voltage domains + * @pwrdm_list: list_head linking all powerdomains in this voltagedomain * @vdd: to be removed */ struct voltagedomain { char *name; bool scalable; struct list_head node; + struct list_head pwrdm_list; struct omap_vdd_info *vdd; }; @@ -187,4 +191,9 @@ extern void omap44xx_voltagedomains_init(void); struct voltagedomain *voltdm_lookup(const char *name); void voltdm_init(struct voltagedomain **voltdm_list); int voltdm_add_pwrdm(struct voltagedomain *voltdm, struct powerdomain *pwrdm); +int voltdm_for_each(int (*fn)(struct voltagedomain *voltdm, void *user), + void *user); +int voltdm_for_each_pwrdm(struct voltagedomain *voltdm, + int (*fn)(struct voltagedomain *voltdm, + struct powerdomain *pwrdm)); #endif -- cgit v1.2.3 From ccd5ca7787df8f1bd267b90f03a09c31c160ffe2 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 21 Mar 2011 14:08:55 -0700 Subject: OMAP2+: voltage: split voltage controller (VC) code into dedicated layer As part of the voltage layer cleanup, split out VC specific code into a dedicated VC layer. This patch primarily just moves VC code from voltage.c into vc.c, and adds prototypes to vc.h. No functional changes. For readability, each function was given a local 'vc' pointer: struct omap_vc_instance_data *vc = voltdm->vdd->vc_data; and a global replace of s/vdd->vc_data/vc/ was done. Also vc_init was renamed to vc_init_channel to reflect that this is per-VC channel initializtion. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/Makefile | 2 +- arch/arm/mach-omap2/vc.c | 285 ++++++++++++++++++++++++++++++++++++++++++ arch/arm/mach-omap2/vc.h | 12 ++ arch/arm/mach-omap2/voltage.c | 264 +------------------------------------- 4 files changed, 302 insertions(+), 261 deletions(-) create mode 100644 arch/arm/mach-omap2/vc.c diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index cce9bc300af5..59db6d9ba244 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -90,7 +90,7 @@ obj-$(CONFIG_ARCH_OMAP4) += prcm.o cm2xxx_3xxx.o cminst44xx.o \ # OMAP voltage domains ifeq ($(CONFIG_PM),y) -voltagedomain-common := voltage.o +voltagedomain-common := voltage.o vc.o obj-$(CONFIG_ARCH_OMAP2) += $(voltagedomain-common) \ voltagedomains2xxx_data.o obj-$(CONFIG_ARCH_OMAP3) += $(voltagedomain-common) \ diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c new file mode 100644 index 000000000000..098af2f3a63e --- /dev/null +++ b/arch/arm/mach-omap2/vc.c @@ -0,0 +1,285 @@ +/* + * OMAP Voltage Controller (VC) interface + * + * Copyright (C) 2011 Texas Instruments, Inc. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include +#include +#include + +#include + +#include "voltage.h" +#include "vc.h" +#include "prm-regbits-34xx.h" +#include "prm-regbits-44xx.h" +#include "prm44xx.h" + +/* Voltage scale and accessory APIs */ +int omap_vc_pre_scale(struct voltagedomain *voltdm, + unsigned long target_volt, + u8 *target_vsel, u8 *current_vsel) +{ + struct omap_vc_instance_data *vc = voltdm->vdd->vc_data; + struct omap_vdd_info *vdd = voltdm->vdd; + struct omap_volt_data *volt_data; + const struct omap_vc_common_data *vc_common; + const struct omap_vp_common_data *vp_common; + u32 vc_cmdval, vp_errgain_val; + + vc_common = vc->vc_common; + vp_common = vdd->vp_data->vp_common; + + /* Check if sufficient pmic info is available for this vdd */ + if (!vdd->pmic_info) { + pr_err("%s: Insufficient pmic info to scale the vdd_%s\n", + __func__, voltdm->name); + return -EINVAL; + } + + if (!vdd->pmic_info->uv_to_vsel) { + pr_err("%s: PMIC function to convert voltage in uV to" + "vsel not registered. Hence unable to scale voltage" + "for vdd_%s\n", __func__, voltdm->name); + return -ENODATA; + } + + if (!vdd->read_reg || !vdd->write_reg) { + pr_err("%s: No read/write API for accessing vdd_%s regs\n", + __func__, voltdm->name); + return -EINVAL; + } + + /* Get volt_data corresponding to target_volt */ + volt_data = omap_voltage_get_voltdata(voltdm, target_volt); + if (IS_ERR(volt_data)) + volt_data = NULL; + + *target_vsel = vdd->pmic_info->uv_to_vsel(target_volt); + *current_vsel = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->voltage); + + /* Setting the ON voltage to the new target voltage */ + vc_cmdval = vdd->read_reg(vc->vc_common->prm_mod, vc->cmdval_reg); + vc_cmdval &= ~vc_common->cmd_on_mask; + vc_cmdval |= (*target_vsel << vc_common->cmd_on_shift); + vdd->write_reg(vc_cmdval, vc->vc_common->prm_mod, vc->cmdval_reg); + + /* Setting vp errorgain based on the voltage */ + if (volt_data) { + vp_errgain_val = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, + vdd->vp_data->vpconfig); + vdd->vp_rt_data.vpconfig_errorgain = volt_data->vp_errgain; + vp_errgain_val &= ~vp_common->vpconfig_errorgain_mask; + vp_errgain_val |= vdd->vp_rt_data.vpconfig_errorgain << + vp_common->vpconfig_errorgain_shift; + vdd->write_reg(vp_errgain_val, vdd->vp_data->vp_common->prm_mod, + vdd->vp_data->vpconfig); + } + + return 0; +} + +void omap_vc_post_scale(struct voltagedomain *voltdm, + unsigned long target_volt, + u8 target_vsel, u8 current_vsel) +{ + struct omap_vdd_info *vdd = voltdm->vdd; + u32 smps_steps = 0, smps_delay = 0; + + smps_steps = abs(target_vsel - current_vsel); + /* SMPS slew rate / step size. 2us added as buffer. */ + smps_delay = ((smps_steps * vdd->pmic_info->step_size) / + vdd->pmic_info->slew_rate) + 2; + udelay(smps_delay); + + vdd->curr_volt = target_volt; +} + +/* vc_bypass_scale_voltage - VC bypass method of voltage scaling */ +int omap_vc_bypass_scale_voltage(struct voltagedomain *voltdm, + unsigned long target_volt) +{ + struct omap_vc_instance_data *vc = voltdm->vdd->vc_data; + struct omap_vdd_info *vdd = voltdm->vdd; + u32 loop_cnt = 0, retries_cnt = 0; + u32 vc_valid, vc_bypass_val_reg, vc_bypass_value; + u8 target_vsel, current_vsel; + int ret; + + ret = omap_vc_pre_scale(voltdm, target_volt, &target_vsel, ¤t_vsel); + if (ret) + return ret; + + vc_valid = vc->vc_common->valid; + vc_bypass_val_reg = vc->vc_common->bypass_val_reg; + vc_bypass_value = (target_vsel << vc->vc_common->data_shift) | + (vdd->pmic_info->pmic_reg << + vc->vc_common->regaddr_shift) | + (vdd->pmic_info->i2c_slave_addr << + vc->vc_common->slaveaddr_shift); + + vdd->write_reg(vc_bypass_value, vc->vc_common->prm_mod, vc_bypass_val_reg); + vdd->write_reg(vc_bypass_value | vc_valid, vc->vc_common->prm_mod, + vc_bypass_val_reg); + + vc_bypass_value = vdd->read_reg(vc->vc_common->prm_mod, vc_bypass_val_reg); + /* + * Loop till the bypass command is acknowledged from the SMPS. + * NOTE: This is legacy code. The loop count and retry count needs + * to be revisited. + */ + while (!(vc_bypass_value & vc_valid)) { + loop_cnt++; + + if (retries_cnt > 10) { + pr_warning("%s: Retry count exceeded\n", __func__); + return -ETIMEDOUT; + } + + if (loop_cnt > 50) { + retries_cnt++; + loop_cnt = 0; + udelay(10); + } + vc_bypass_value = vdd->read_reg(vc->vc_common->prm_mod, + vc_bypass_val_reg); + } + + omap_vc_post_scale(voltdm, target_volt, target_vsel, current_vsel); + return 0; +} + +static void __init omap3_vfsm_init(struct voltagedomain *voltdm) +{ + struct omap_vc_instance_data *vc = voltdm->vdd->vc_data; + struct omap_vdd_info *vdd = voltdm->vdd; + + /* + * Voltage Manager FSM parameters init + * XXX This data should be passed in from the board file + */ + vdd->write_reg(OMAP3_CLKSETUP, vc->vc_common->prm_mod, OMAP3_PRM_CLKSETUP_OFFSET); + vdd->write_reg(OMAP3_VOLTOFFSET, vc->vc_common->prm_mod, + OMAP3_PRM_VOLTOFFSET_OFFSET); + vdd->write_reg(OMAP3_VOLTSETUP2, vc->vc_common->prm_mod, + OMAP3_PRM_VOLTSETUP2_OFFSET); +} + +static void __init omap3_vc_init_channel(struct voltagedomain *voltdm) +{ + struct omap_vc_instance_data *vc = voltdm->vdd->vc_data; + struct omap_vdd_info *vdd = voltdm->vdd; + static bool is_initialized; + u8 on_vsel, onlp_vsel, ret_vsel, off_vsel; + u32 vc_val; + + if (is_initialized) + return; + + /* Set up the on, inactive, retention and off voltage */ + on_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->on_volt); + onlp_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->onlp_volt); + ret_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->ret_volt); + off_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->off_volt); + vc_val = ((on_vsel << vc->vc_common->cmd_on_shift) | + (onlp_vsel << vc->vc_common->cmd_onlp_shift) | + (ret_vsel << vc->vc_common->cmd_ret_shift) | + (off_vsel << vc->vc_common->cmd_off_shift)); + vdd->write_reg(vc_val, vc->vc_common->prm_mod, vc->cmdval_reg); + + /* + * Generic VC parameters init + * XXX This data should be abstracted out + */ + vdd->write_reg(OMAP3430_CMD1_MASK | OMAP3430_RAV1_MASK, vc->vc_common->prm_mod, + OMAP3_PRM_VC_CH_CONF_OFFSET); + vdd->write_reg(OMAP3430_MCODE_SHIFT | OMAP3430_HSEN_MASK, vc->vc_common->prm_mod, + OMAP3_PRM_VC_I2C_CFG_OFFSET); + + omap3_vfsm_init(voltdm); + + is_initialized = true; +} + + +/* OMAP4 specific voltage init functions */ +static void __init omap4_vc_init_channel(struct voltagedomain *voltdm) +{ + struct omap_vc_instance_data *vc = voltdm->vdd->vc_data; + struct omap_vdd_info *vdd = voltdm->vdd; + static bool is_initialized; + u32 vc_val; + + if (is_initialized) + return; + + /* TODO: Configure setup times and CMD_VAL values*/ + + /* + * Generic VC parameters init + * XXX This data should be abstracted out + */ + vc_val = (OMAP4430_RAV_VDD_MPU_L_MASK | OMAP4430_CMD_VDD_MPU_L_MASK | + OMAP4430_RAV_VDD_IVA_L_MASK | OMAP4430_CMD_VDD_IVA_L_MASK | + OMAP4430_RAV_VDD_CORE_L_MASK | OMAP4430_CMD_VDD_CORE_L_MASK); + vdd->write_reg(vc_val, vc->vc_common->prm_mod, OMAP4_PRM_VC_CFG_CHANNEL_OFFSET); + + /* XXX These are magic numbers and do not belong! */ + vc_val = (0x60 << OMAP4430_SCLL_SHIFT | 0x26 << OMAP4430_SCLH_SHIFT); + vdd->write_reg(vc_val, vc->vc_common->prm_mod, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET); + + is_initialized = true; +} + +void __init omap_vc_init_channel(struct voltagedomain *voltdm) +{ + struct omap_vc_instance_data *vc = voltdm->vdd->vc_data; + struct omap_vdd_info *vdd = voltdm->vdd; + u32 vc_val; + + if (!vdd->pmic_info || !vdd->pmic_info->uv_to_vsel) { + pr_err("%s: PMIC info requried to configure vc for" + "vdd_%s not populated.Hence cannot initialize vc\n", + __func__, voltdm->name); + return; + } + + if (!vdd->read_reg || !vdd->write_reg) { + pr_err("%s: No read/write API for accessing vdd_%s regs\n", + __func__, voltdm->name); + return; + } + + /* Set up the SMPS_SA(i2c slave address in VC */ + vc_val = vdd->read_reg(vc->vc_common->prm_mod, + vc->vc_common->smps_sa_reg); + vc_val &= ~vc->smps_sa_mask; + vc_val |= vdd->pmic_info->i2c_slave_addr << vc->smps_sa_shift; + vdd->write_reg(vc_val, vc->vc_common->prm_mod, + vc->vc_common->smps_sa_reg); + + /* Setup the VOLRA(pmic reg addr) in VC */ + vc_val = vdd->read_reg(vc->vc_common->prm_mod, + vc->vc_common->smps_volra_reg); + vc_val &= ~vc->smps_volra_mask; + vc_val |= vdd->pmic_info->pmic_reg << vc->smps_volra_shift; + vdd->write_reg(vc_val, vc->vc_common->prm_mod, + vc->vc_common->smps_volra_reg); + + /* Configure the setup times */ + vc_val = vdd->read_reg(vc->vc_common->prm_mod, vdd->vfsm->voltsetup_reg); + vc_val &= ~vdd->vfsm->voltsetup_mask; + vc_val |= vdd->pmic_info->volt_setup_time << + vdd->vfsm->voltsetup_shift; + vdd->write_reg(vc_val, vc->vc_common->prm_mod, vdd->vfsm->voltsetup_reg); + + if (cpu_is_omap34xx()) + omap3_vc_init_channel(voltdm); + else if (cpu_is_omap44xx()) + omap4_vc_init_channel(voltdm); +} + diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h index f7338af13d0b..d0bf34831c0b 100644 --- a/arch/arm/mach-omap2/vc.h +++ b/arch/arm/mach-omap2/vc.h @@ -19,6 +19,8 @@ #include +struct voltagedomain; + /** * struct omap_vc_common_data - per-VC register/bitfield data * @cmd_on_mask: ON bitmask in PRM_VC_CMD_VAL* register @@ -81,5 +83,15 @@ extern struct omap_vc_instance_data omap4_vc_mpu_data; extern struct omap_vc_instance_data omap4_vc_iva_data; extern struct omap_vc_instance_data omap4_vc_core_data; +void omap_vc_init_channel(struct voltagedomain *voltdm); +int omap_vc_pre_scale(struct voltagedomain *voltdm, + unsigned long target_volt, + u8 *target_vsel, u8 *current_vsel); +void omap_vc_post_scale(struct voltagedomain *voltdm, + unsigned long target_volt, + u8 target_vsel, u8 current_vsel); +int omap_vc_bypass_scale_voltage(struct voltagedomain *voltdm, + unsigned long target_volt); + #endif diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index 1e5c1225e2be..6ba6e493c757 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -293,136 +293,6 @@ static void __init vdd_debugfs_init(struct voltagedomain *voltdm) &nom_volt_debug_fops); } -/* Voltage scale and accessory APIs */ -static int _pre_volt_scale(struct voltagedomain *voltdm, - unsigned long target_volt, u8 *target_vsel, u8 *current_vsel) -{ - struct omap_vdd_info *vdd = voltdm->vdd; - struct omap_volt_data *volt_data; - const struct omap_vc_common_data *vc_common; - const struct omap_vp_common_data *vp_common; - u32 vc_cmdval, vp_errgain_val; - - vc_common = vdd->vc_data->vc_common; - vp_common = vdd->vp_data->vp_common; - - /* Check if suffiecient pmic info is available for this vdd */ - if (!vdd->pmic_info) { - pr_err("%s: Insufficient pmic info to scale the vdd_%s\n", - __func__, voltdm->name); - return -EINVAL; - } - - if (!vdd->pmic_info->uv_to_vsel) { - pr_err("%s: PMIC function to convert voltage in uV to" - "vsel not registered. Hence unable to scale voltage" - "for vdd_%s\n", __func__, voltdm->name); - return -ENODATA; - } - - if (!vdd->read_reg || !vdd->write_reg) { - pr_err("%s: No read/write API for accessing vdd_%s regs\n", - __func__, voltdm->name); - return -EINVAL; - } - - /* Get volt_data corresponding to target_volt */ - volt_data = omap_voltage_get_voltdata(voltdm, target_volt); - if (IS_ERR(volt_data)) - volt_data = NULL; - - *target_vsel = vdd->pmic_info->uv_to_vsel(target_volt); - *current_vsel = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->voltage); - - /* Setting the ON voltage to the new target voltage */ - vc_cmdval = vdd->read_reg(vdd->vc_data->vc_common->prm_mod, vdd->vc_data->cmdval_reg); - vc_cmdval &= ~vc_common->cmd_on_mask; - vc_cmdval |= (*target_vsel << vc_common->cmd_on_shift); - vdd->write_reg(vc_cmdval, vdd->vc_data->vc_common->prm_mod, vdd->vc_data->cmdval_reg); - - /* Setting vp errorgain based on the voltage */ - if (volt_data) { - vp_errgain_val = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, - vdd->vp_data->vpconfig); - vdd->vp_rt_data.vpconfig_errorgain = volt_data->vp_errgain; - vp_errgain_val &= ~vp_common->vpconfig_errorgain_mask; - vp_errgain_val |= vdd->vp_rt_data.vpconfig_errorgain << - vp_common->vpconfig_errorgain_shift; - vdd->write_reg(vp_errgain_val, vdd->vp_data->vp_common->prm_mod, - vdd->vp_data->vpconfig); - } - - return 0; -} - -static void _post_volt_scale(struct voltagedomain *voltdm, - unsigned long target_volt, u8 target_vsel, u8 current_vsel) -{ - struct omap_vdd_info *vdd = voltdm->vdd; - u32 smps_steps = 0, smps_delay = 0; - - smps_steps = abs(target_vsel - current_vsel); - /* SMPS slew rate / step size. 2us added as buffer. */ - smps_delay = ((smps_steps * vdd->pmic_info->step_size) / - vdd->pmic_info->slew_rate) + 2; - udelay(smps_delay); - - vdd->curr_volt = target_volt; -} - -/* vc_bypass_scale_voltage - VC bypass method of voltage scaling */ -static int vc_bypass_scale_voltage(struct voltagedomain *voltdm, - unsigned long target_volt) -{ - struct omap_vdd_info *vdd = voltdm->vdd; - u32 loop_cnt = 0, retries_cnt = 0; - u32 vc_valid, vc_bypass_val_reg, vc_bypass_value; - u8 target_vsel, current_vsel; - int ret; - - ret = _pre_volt_scale(voltdm, target_volt, &target_vsel, ¤t_vsel); - if (ret) - return ret; - - vc_valid = vdd->vc_data->vc_common->valid; - vc_bypass_val_reg = vdd->vc_data->vc_common->bypass_val_reg; - vc_bypass_value = (target_vsel << vdd->vc_data->vc_common->data_shift) | - (vdd->pmic_info->pmic_reg << - vdd->vc_data->vc_common->regaddr_shift) | - (vdd->pmic_info->i2c_slave_addr << - vdd->vc_data->vc_common->slaveaddr_shift); - - vdd->write_reg(vc_bypass_value, vdd->vc_data->vc_common->prm_mod, vc_bypass_val_reg); - vdd->write_reg(vc_bypass_value | vc_valid, vdd->vc_data->vc_common->prm_mod, - vc_bypass_val_reg); - - vc_bypass_value = vdd->read_reg(vdd->vc_data->vc_common->prm_mod, vc_bypass_val_reg); - /* - * Loop till the bypass command is acknowledged from the SMPS. - * NOTE: This is legacy code. The loop count and retry count needs - * to be revisited. - */ - while (!(vc_bypass_value & vc_valid)) { - loop_cnt++; - - if (retries_cnt > 10) { - pr_warning("%s: Retry count exceeded\n", __func__); - return -ETIMEDOUT; - } - - if (loop_cnt > 50) { - retries_cnt++; - loop_cnt = 0; - udelay(10); - } - vc_bypass_value = vdd->read_reg(vdd->vc_data->vc_common->prm_mod, - vc_bypass_val_reg); - } - - _post_volt_scale(voltdm, target_volt, target_vsel, current_vsel); - return 0; -} - /* VP force update method of voltage scaling */ static int vp_forceupdate_scale_voltage(struct voltagedomain *voltdm, unsigned long target_volt) @@ -432,7 +302,7 @@ static int vp_forceupdate_scale_voltage(struct voltagedomain *voltdm, u8 target_vsel, current_vsel; int ret, timeout = 0; - ret = _pre_volt_scale(voltdm, target_volt, &target_vsel, ¤t_vsel); + ret = omap_vc_pre_scale(voltdm, target_volt, &target_vsel, ¤t_vsel); if (ret) return ret; @@ -485,7 +355,7 @@ static int vp_forceupdate_scale_voltage(struct voltagedomain *voltdm, "TRANXDONE never got set after the voltage update\n", __func__, voltdm->name); - _post_volt_scale(voltdm, target_volt, target_vsel, current_vsel); + omap_vc_post_scale(voltdm, target_volt, target_vsel, current_vsel); /* * Disable TransactionDone interrupt , clear all status, clear @@ -517,132 +387,6 @@ static int vp_forceupdate_scale_voltage(struct voltagedomain *voltdm, return 0; } -static void __init omap3_vfsm_init(struct voltagedomain *voltdm) -{ - struct omap_vdd_info *vdd = voltdm->vdd; - - /* - * Voltage Manager FSM parameters init - * XXX This data should be passed in from the board file - */ - vdd->write_reg(OMAP3_CLKSETUP, vdd->vc_data->vc_common->prm_mod, OMAP3_PRM_CLKSETUP_OFFSET); - vdd->write_reg(OMAP3_VOLTOFFSET, vdd->vc_data->vc_common->prm_mod, - OMAP3_PRM_VOLTOFFSET_OFFSET); - vdd->write_reg(OMAP3_VOLTSETUP2, vdd->vc_data->vc_common->prm_mod, - OMAP3_PRM_VOLTSETUP2_OFFSET); -} - -static void __init omap3_vc_init(struct voltagedomain *voltdm) -{ - struct omap_vdd_info *vdd = voltdm->vdd; - static bool is_initialized; - u8 on_vsel, onlp_vsel, ret_vsel, off_vsel; - u32 vc_val; - - if (is_initialized) - return; - - /* Set up the on, inactive, retention and off voltage */ - on_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->on_volt); - onlp_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->onlp_volt); - ret_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->ret_volt); - off_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->off_volt); - vc_val = ((on_vsel << vdd->vc_data->vc_common->cmd_on_shift) | - (onlp_vsel << vdd->vc_data->vc_common->cmd_onlp_shift) | - (ret_vsel << vdd->vc_data->vc_common->cmd_ret_shift) | - (off_vsel << vdd->vc_data->vc_common->cmd_off_shift)); - vdd->write_reg(vc_val, vdd->vc_data->vc_common->prm_mod, vdd->vc_data->cmdval_reg); - - /* - * Generic VC parameters init - * XXX This data should be abstracted out - */ - vdd->write_reg(OMAP3430_CMD1_MASK | OMAP3430_RAV1_MASK, vdd->vc_data->vc_common->prm_mod, - OMAP3_PRM_VC_CH_CONF_OFFSET); - vdd->write_reg(OMAP3430_MCODE_SHIFT | OMAP3430_HSEN_MASK, vdd->vc_data->vc_common->prm_mod, - OMAP3_PRM_VC_I2C_CFG_OFFSET); - - omap3_vfsm_init(voltdm); - - is_initialized = true; -} - - -/* OMAP4 specific voltage init functions */ -static void __init omap4_vc_init(struct voltagedomain *voltdm) -{ - struct omap_vdd_info *vdd = voltdm->vdd; - static bool is_initialized; - u32 vc_val; - - if (is_initialized) - return; - - /* TODO: Configure setup times and CMD_VAL values*/ - - /* - * Generic VC parameters init - * XXX This data should be abstracted out - */ - vc_val = (OMAP4430_RAV_VDD_MPU_L_MASK | OMAP4430_CMD_VDD_MPU_L_MASK | - OMAP4430_RAV_VDD_IVA_L_MASK | OMAP4430_CMD_VDD_IVA_L_MASK | - OMAP4430_RAV_VDD_CORE_L_MASK | OMAP4430_CMD_VDD_CORE_L_MASK); - vdd->write_reg(vc_val, vdd->vc_data->vc_common->prm_mod, OMAP4_PRM_VC_CFG_CHANNEL_OFFSET); - - /* XXX These are magic numbers and do not belong! */ - vc_val = (0x60 << OMAP4430_SCLL_SHIFT | 0x26 << OMAP4430_SCLH_SHIFT); - vdd->write_reg(vc_val, vdd->vc_data->vc_common->prm_mod, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET); - - is_initialized = true; -} - -static void __init omap_vc_init(struct voltagedomain *voltdm) -{ - struct omap_vdd_info *vdd = voltdm->vdd; - u32 vc_val; - - if (!vdd->pmic_info || !vdd->pmic_info->uv_to_vsel) { - pr_err("%s: PMIC info requried to configure vc for" - "vdd_%s not populated.Hence cannot initialize vc\n", - __func__, voltdm->name); - return; - } - - if (!vdd->read_reg || !vdd->write_reg) { - pr_err("%s: No read/write API for accessing vdd_%s regs\n", - __func__, voltdm->name); - return; - } - - /* Set up the SMPS_SA(i2c slave address in VC */ - vc_val = vdd->read_reg(vdd->vc_data->vc_common->prm_mod, - vdd->vc_data->vc_common->smps_sa_reg); - vc_val &= ~vdd->vc_data->smps_sa_mask; - vc_val |= vdd->pmic_info->i2c_slave_addr << vdd->vc_data->smps_sa_shift; - vdd->write_reg(vc_val, vdd->vc_data->vc_common->prm_mod, - vdd->vc_data->vc_common->smps_sa_reg); - - /* Setup the VOLRA(pmic reg addr) in VC */ - vc_val = vdd->read_reg(vdd->vc_data->vc_common->prm_mod, - vdd->vc_data->vc_common->smps_volra_reg); - vc_val &= ~vdd->vc_data->smps_volra_mask; - vc_val |= vdd->pmic_info->pmic_reg << vdd->vc_data->smps_volra_shift; - vdd->write_reg(vc_val, vdd->vc_data->vc_common->prm_mod, - vdd->vc_data->vc_common->smps_volra_reg); - - /* Configure the setup times */ - vc_val = vdd->read_reg(vdd->vc_data->vc_common->prm_mod, vdd->vfsm->voltsetup_reg); - vc_val &= ~vdd->vfsm->voltsetup_mask; - vc_val |= vdd->pmic_info->volt_setup_time << - vdd->vfsm->voltsetup_shift; - vdd->write_reg(vc_val, vdd->vc_data->vc_common->prm_mod, vdd->vfsm->voltsetup_reg); - - if (cpu_is_omap34xx()) - omap3_vc_init(voltdm); - else if (cpu_is_omap44xx()) - omap4_vc_init(voltdm); -} - static int __init omap_vdd_data_configure(struct voltagedomain *voltdm) { struct omap_vdd_info *vdd = voltdm->vdd; @@ -1025,7 +769,7 @@ void omap_change_voltscale_method(struct voltagedomain *voltdm, vdd->volt_scale = vp_forceupdate_scale_voltage; return; case VOLTSCALE_VCBYPASS: - vdd->volt_scale = vc_bypass_scale_voltage; + vdd->volt_scale = omap_vc_bypass_scale_voltage; return; default: pr_warning("%s: Trying to change the method of voltage scaling" @@ -1061,7 +805,7 @@ int __init omap_voltage_late_init(void) if (voltdm->vdd) { if (omap_vdd_data_configure(voltdm)) continue; - omap_vc_init(voltdm); + omap_vc_init_channel(voltdm); vp_init(voltdm); vdd_debugfs_init(voltdm); } -- cgit v1.2.3 From d84adcf46b9c235d1f4975b72a8c2763dbfb0081 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 22 Mar 2011 16:14:57 -0700 Subject: OMAP2+: voltage: move VC into struct voltagedomain, misc. renames Move the VC instance struct from omap_vdd_info into struct voltagedomain. While moving, perform some misc. renames for readability. No functional changes. Summary of renames: - rename omap_vc_instance to omap_vc_channel, since there is only one instance of the VC IP and this actually represents channels using TRM terminology. - rename 'vc_common' field of VC channel which led to: s/vc->vc_common/vc->common/ - remove redundant '_data' suffix - OMAP3: vc1 --> vc_mpu, vc2 --> vc_core - omap_vc_bypass_scale_voltage() -> omap_vc_bypass_scale() Signed-off-by: Kevin Hilman merge --- arch/arm/mach-omap2/vc.c | 90 +++++++++++++-------------- arch/arm/mach-omap2/vc.h | 26 ++++---- arch/arm/mach-omap2/vc3xxx_data.c | 10 +-- arch/arm/mach-omap2/vc44xx_data.c | 14 ++--- arch/arm/mach-omap2/voltage.c | 6 +- arch/arm/mach-omap2/voltage.h | 6 +- arch/arm/mach-omap2/voltagedomains3xxx_data.c | 4 +- arch/arm/mach-omap2/voltagedomains44xx_data.c | 6 +- 8 files changed, 81 insertions(+), 81 deletions(-) diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index 098af2f3a63e..b62363d9d2b7 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -24,14 +24,12 @@ int omap_vc_pre_scale(struct voltagedomain *voltdm, unsigned long target_volt, u8 *target_vsel, u8 *current_vsel) { - struct omap_vc_instance_data *vc = voltdm->vdd->vc_data; + struct omap_vc_channel *vc = voltdm->vc; struct omap_vdd_info *vdd = voltdm->vdd; struct omap_volt_data *volt_data; - const struct omap_vc_common_data *vc_common; const struct omap_vp_common_data *vp_common; u32 vc_cmdval, vp_errgain_val; - vc_common = vc->vc_common; vp_common = vdd->vp_data->vp_common; /* Check if sufficient pmic info is available for this vdd */ @@ -63,10 +61,10 @@ int omap_vc_pre_scale(struct voltagedomain *voltdm, *current_vsel = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->voltage); /* Setting the ON voltage to the new target voltage */ - vc_cmdval = vdd->read_reg(vc->vc_common->prm_mod, vc->cmdval_reg); - vc_cmdval &= ~vc_common->cmd_on_mask; - vc_cmdval |= (*target_vsel << vc_common->cmd_on_shift); - vdd->write_reg(vc_cmdval, vc->vc_common->prm_mod, vc->cmdval_reg); + vc_cmdval = vdd->read_reg(vc->common->prm_mod, vc->cmdval_reg); + vc_cmdval &= ~vc->common->cmd_on_mask; + vc_cmdval |= (*target_vsel << vc->common->cmd_on_shift); + vdd->write_reg(vc_cmdval, vc->common->prm_mod, vc->cmdval_reg); /* Setting vp errorgain based on the voltage */ if (volt_data) { @@ -99,11 +97,11 @@ void omap_vc_post_scale(struct voltagedomain *voltdm, vdd->curr_volt = target_volt; } -/* vc_bypass_scale_voltage - VC bypass method of voltage scaling */ -int omap_vc_bypass_scale_voltage(struct voltagedomain *voltdm, - unsigned long target_volt) +/* vc_bypass_scale - VC bypass method of voltage scaling */ +int omap_vc_bypass_scale(struct voltagedomain *voltdm, + unsigned long target_volt) { - struct omap_vc_instance_data *vc = voltdm->vdd->vc_data; + struct omap_vc_channel *vc = voltdm->vc; struct omap_vdd_info *vdd = voltdm->vdd; u32 loop_cnt = 0, retries_cnt = 0; u32 vc_valid, vc_bypass_val_reg, vc_bypass_value; @@ -114,19 +112,19 @@ int omap_vc_bypass_scale_voltage(struct voltagedomain *voltdm, if (ret) return ret; - vc_valid = vc->vc_common->valid; - vc_bypass_val_reg = vc->vc_common->bypass_val_reg; - vc_bypass_value = (target_vsel << vc->vc_common->data_shift) | + vc_valid = vc->common->valid; + vc_bypass_val_reg = vc->common->bypass_val_reg; + vc_bypass_value = (target_vsel << vc->common->data_shift) | (vdd->pmic_info->pmic_reg << - vc->vc_common->regaddr_shift) | + vc->common->regaddr_shift) | (vdd->pmic_info->i2c_slave_addr << - vc->vc_common->slaveaddr_shift); + vc->common->slaveaddr_shift); - vdd->write_reg(vc_bypass_value, vc->vc_common->prm_mod, vc_bypass_val_reg); - vdd->write_reg(vc_bypass_value | vc_valid, vc->vc_common->prm_mod, + vdd->write_reg(vc_bypass_value, vc->common->prm_mod, vc_bypass_val_reg); + vdd->write_reg(vc_bypass_value | vc_valid, vc->common->prm_mod, vc_bypass_val_reg); - vc_bypass_value = vdd->read_reg(vc->vc_common->prm_mod, vc_bypass_val_reg); + vc_bypass_value = vdd->read_reg(vc->common->prm_mod, vc_bypass_val_reg); /* * Loop till the bypass command is acknowledged from the SMPS. * NOTE: This is legacy code. The loop count and retry count needs @@ -145,7 +143,7 @@ int omap_vc_bypass_scale_voltage(struct voltagedomain *voltdm, loop_cnt = 0; udelay(10); } - vc_bypass_value = vdd->read_reg(vc->vc_common->prm_mod, + vc_bypass_value = vdd->read_reg(vc->common->prm_mod, vc_bypass_val_reg); } @@ -155,23 +153,23 @@ int omap_vc_bypass_scale_voltage(struct voltagedomain *voltdm, static void __init omap3_vfsm_init(struct voltagedomain *voltdm) { - struct omap_vc_instance_data *vc = voltdm->vdd->vc_data; + struct omap_vc_channel *vc = voltdm->vc; struct omap_vdd_info *vdd = voltdm->vdd; /* * Voltage Manager FSM parameters init * XXX This data should be passed in from the board file */ - vdd->write_reg(OMAP3_CLKSETUP, vc->vc_common->prm_mod, OMAP3_PRM_CLKSETUP_OFFSET); - vdd->write_reg(OMAP3_VOLTOFFSET, vc->vc_common->prm_mod, + vdd->write_reg(OMAP3_CLKSETUP, vc->common->prm_mod, OMAP3_PRM_CLKSETUP_OFFSET); + vdd->write_reg(OMAP3_VOLTOFFSET, vc->common->prm_mod, OMAP3_PRM_VOLTOFFSET_OFFSET); - vdd->write_reg(OMAP3_VOLTSETUP2, vc->vc_common->prm_mod, + vdd->write_reg(OMAP3_VOLTSETUP2, vc->common->prm_mod, OMAP3_PRM_VOLTSETUP2_OFFSET); } static void __init omap3_vc_init_channel(struct voltagedomain *voltdm) { - struct omap_vc_instance_data *vc = voltdm->vdd->vc_data; + struct omap_vc_channel *vc = voltdm->vc; struct omap_vdd_info *vdd = voltdm->vdd; static bool is_initialized; u8 on_vsel, onlp_vsel, ret_vsel, off_vsel; @@ -185,19 +183,19 @@ static void __init omap3_vc_init_channel(struct voltagedomain *voltdm) onlp_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->onlp_volt); ret_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->ret_volt); off_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->off_volt); - vc_val = ((on_vsel << vc->vc_common->cmd_on_shift) | - (onlp_vsel << vc->vc_common->cmd_onlp_shift) | - (ret_vsel << vc->vc_common->cmd_ret_shift) | - (off_vsel << vc->vc_common->cmd_off_shift)); - vdd->write_reg(vc_val, vc->vc_common->prm_mod, vc->cmdval_reg); + vc_val = ((on_vsel << vc->common->cmd_on_shift) | + (onlp_vsel << vc->common->cmd_onlp_shift) | + (ret_vsel << vc->common->cmd_ret_shift) | + (off_vsel << vc->common->cmd_off_shift)); + vdd->write_reg(vc_val, vc->common->prm_mod, vc->cmdval_reg); /* * Generic VC parameters init * XXX This data should be abstracted out */ - vdd->write_reg(OMAP3430_CMD1_MASK | OMAP3430_RAV1_MASK, vc->vc_common->prm_mod, + vdd->write_reg(OMAP3430_CMD1_MASK | OMAP3430_RAV1_MASK, vc->common->prm_mod, OMAP3_PRM_VC_CH_CONF_OFFSET); - vdd->write_reg(OMAP3430_MCODE_SHIFT | OMAP3430_HSEN_MASK, vc->vc_common->prm_mod, + vdd->write_reg(OMAP3430_MCODE_SHIFT | OMAP3430_HSEN_MASK, vc->common->prm_mod, OMAP3_PRM_VC_I2C_CFG_OFFSET); omap3_vfsm_init(voltdm); @@ -209,7 +207,7 @@ static void __init omap3_vc_init_channel(struct voltagedomain *voltdm) /* OMAP4 specific voltage init functions */ static void __init omap4_vc_init_channel(struct voltagedomain *voltdm) { - struct omap_vc_instance_data *vc = voltdm->vdd->vc_data; + struct omap_vc_channel *vc = voltdm->vc; struct omap_vdd_info *vdd = voltdm->vdd; static bool is_initialized; u32 vc_val; @@ -226,18 +224,18 @@ static void __init omap4_vc_init_channel(struct voltagedomain *voltdm) vc_val = (OMAP4430_RAV_VDD_MPU_L_MASK | OMAP4430_CMD_VDD_MPU_L_MASK | OMAP4430_RAV_VDD_IVA_L_MASK | OMAP4430_CMD_VDD_IVA_L_MASK | OMAP4430_RAV_VDD_CORE_L_MASK | OMAP4430_CMD_VDD_CORE_L_MASK); - vdd->write_reg(vc_val, vc->vc_common->prm_mod, OMAP4_PRM_VC_CFG_CHANNEL_OFFSET); + vdd->write_reg(vc_val, vc->common->prm_mod, OMAP4_PRM_VC_CFG_CHANNEL_OFFSET); /* XXX These are magic numbers and do not belong! */ vc_val = (0x60 << OMAP4430_SCLL_SHIFT | 0x26 << OMAP4430_SCLH_SHIFT); - vdd->write_reg(vc_val, vc->vc_common->prm_mod, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET); + vdd->write_reg(vc_val, vc->common->prm_mod, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET); is_initialized = true; } void __init omap_vc_init_channel(struct voltagedomain *voltdm) { - struct omap_vc_instance_data *vc = voltdm->vdd->vc_data; + struct omap_vc_channel *vc = voltdm->vc; struct omap_vdd_info *vdd = voltdm->vdd; u32 vc_val; @@ -255,27 +253,27 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm) } /* Set up the SMPS_SA(i2c slave address in VC */ - vc_val = vdd->read_reg(vc->vc_common->prm_mod, - vc->vc_common->smps_sa_reg); + vc_val = vdd->read_reg(vc->common->prm_mod, + vc->common->smps_sa_reg); vc_val &= ~vc->smps_sa_mask; vc_val |= vdd->pmic_info->i2c_slave_addr << vc->smps_sa_shift; - vdd->write_reg(vc_val, vc->vc_common->prm_mod, - vc->vc_common->smps_sa_reg); + vdd->write_reg(vc_val, vc->common->prm_mod, + vc->common->smps_sa_reg); /* Setup the VOLRA(pmic reg addr) in VC */ - vc_val = vdd->read_reg(vc->vc_common->prm_mod, - vc->vc_common->smps_volra_reg); + vc_val = vdd->read_reg(vc->common->prm_mod, + vc->common->smps_volra_reg); vc_val &= ~vc->smps_volra_mask; vc_val |= vdd->pmic_info->pmic_reg << vc->smps_volra_shift; - vdd->write_reg(vc_val, vc->vc_common->prm_mod, - vc->vc_common->smps_volra_reg); + vdd->write_reg(vc_val, vc->common->prm_mod, + vc->common->smps_volra_reg); /* Configure the setup times */ - vc_val = vdd->read_reg(vc->vc_common->prm_mod, vdd->vfsm->voltsetup_reg); + vc_val = vdd->read_reg(vc->common->prm_mod, vdd->vfsm->voltsetup_reg); vc_val &= ~vdd->vfsm->voltsetup_mask; vc_val |= vdd->pmic_info->volt_setup_time << vdd->vfsm->voltsetup_shift; - vdd->write_reg(vc_val, vc->vc_common->prm_mod, vdd->vfsm->voltsetup_reg); + vdd->write_reg(vc_val, vc->common->prm_mod, vdd->vfsm->voltsetup_reg); if (cpu_is_omap34xx()) omap3_vc_init_channel(voltdm); diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h index d0bf34831c0b..51d36a80b131 100644 --- a/arch/arm/mach-omap2/vc.h +++ b/arch/arm/mach-omap2/vc.h @@ -22,7 +22,7 @@ struct voltagedomain; /** - * struct omap_vc_common_data - per-VC register/bitfield data + * struct omap_vc_common - per-VC register/bitfield data * @cmd_on_mask: ON bitmask in PRM_VC_CMD_VAL* register * @valid: VALID bitmask in PRM_VC_BYPASS_VAL register * @prm_mod: PRM module id used for PRM register access @@ -40,7 +40,7 @@ struct voltagedomain; * XXX One of cmd_on_mask and cmd_on_shift are not needed * XXX VALID should probably be a shift, not a mask */ -struct omap_vc_common_data { +struct omap_vc_common { u32 cmd_on_mask; u32 valid; s16 prm_mod; @@ -57,8 +57,8 @@ struct omap_vc_common_data { }; /** - * struct omap_vc_instance_data - VC per-instance data - * @vc_common: pointer to VC common data for this platform + * struct omap_vc_channel - VC per-instance data + * @common: pointer to VC common data for this platform * @smps_sa_mask: SA* bitmask in the PRM_VC_SMPS_SA register * @smps_volra_mask: VOLRA* bitmask in the PRM_VC_VOL_RA register * @smps_sa_shift: SA* field shift in the PRM_VC_SMPS_SA register @@ -67,8 +67,8 @@ struct omap_vc_common_data { * XXX It is not necessary to have both a *_mask and a *_shift - * remove one */ -struct omap_vc_instance_data { - const struct omap_vc_common_data *vc_common; +struct omap_vc_channel { + const struct omap_vc_common *common; u32 smps_sa_mask; u32 smps_volra_mask; u8 cmdval_reg; @@ -76,12 +76,12 @@ struct omap_vc_instance_data { u8 smps_volra_shift; }; -extern struct omap_vc_instance_data omap3_vc1_data; -extern struct omap_vc_instance_data omap3_vc2_data; +extern struct omap_vc_channel omap3_vc_mpu; +extern struct omap_vc_channel omap3_vc_core; -extern struct omap_vc_instance_data omap4_vc_mpu_data; -extern struct omap_vc_instance_data omap4_vc_iva_data; -extern struct omap_vc_instance_data omap4_vc_core_data; +extern struct omap_vc_channel omap4_vc_mpu; +extern struct omap_vc_channel omap4_vc_iva; +extern struct omap_vc_channel omap4_vc_core; void omap_vc_init_channel(struct voltagedomain *voltdm); int omap_vc_pre_scale(struct voltagedomain *voltdm, @@ -90,8 +90,8 @@ int omap_vc_pre_scale(struct voltagedomain *voltdm, void omap_vc_post_scale(struct voltagedomain *voltdm, unsigned long target_volt, u8 target_vsel, u8 current_vsel); -int omap_vc_bypass_scale_voltage(struct voltagedomain *voltdm, - unsigned long target_volt); +int omap_vc_bypass_scale(struct voltagedomain *voltdm, + unsigned long target_volt); #endif diff --git a/arch/arm/mach-omap2/vc3xxx_data.c b/arch/arm/mach-omap2/vc3xxx_data.c index 55caccb2908d..1a17ed459cc3 100644 --- a/arch/arm/mach-omap2/vc3xxx_data.c +++ b/arch/arm/mach-omap2/vc3xxx_data.c @@ -29,7 +29,7 @@ * VC data common to 34xx/36xx chips * XXX This stuff presumably belongs in the vc3xxx.c or vc.c file. */ -static struct omap_vc_common_data omap3_vc_common = { +static struct omap_vc_common omap3_vc_common = { .prm_mod = OMAP3430_GR_MOD, .smps_sa_reg = OMAP3_PRM_VC_SMPS_SA_OFFSET, .smps_volra_reg = OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET, @@ -45,8 +45,8 @@ static struct omap_vc_common_data omap3_vc_common = { .cmd_off_shift = OMAP3430_VC_CMD_OFF_SHIFT, }; -struct omap_vc_instance_data omap3_vc1_data = { - .vc_common = &omap3_vc_common, +struct omap_vc_channel omap3_vc_mpu = { + .common = &omap3_vc_common, .cmdval_reg = OMAP3_PRM_VC_CMD_VAL_0_OFFSET, .smps_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA0_SHIFT, .smps_sa_mask = OMAP3430_PRM_VC_SMPS_SA_SA0_MASK, @@ -54,8 +54,8 @@ struct omap_vc_instance_data omap3_vc1_data = { .smps_volra_mask = OMAP3430_VOLRA0_MASK, }; -struct omap_vc_instance_data omap3_vc2_data = { - .vc_common = &omap3_vc_common, +struct omap_vc_channel omap3_vc_core = { + .common = &omap3_vc_common, .cmdval_reg = OMAP3_PRM_VC_CMD_VAL_1_OFFSET, .smps_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA1_SHIFT, .smps_sa_mask = OMAP3430_PRM_VC_SMPS_SA_SA1_MASK, diff --git a/arch/arm/mach-omap2/vc44xx_data.c b/arch/arm/mach-omap2/vc44xx_data.c index b62678e12a3c..56f3f4a37879 100644 --- a/arch/arm/mach-omap2/vc44xx_data.c +++ b/arch/arm/mach-omap2/vc44xx_data.c @@ -30,7 +30,7 @@ * VC data common to 44xx chips * XXX This stuff presumably belongs in the vc3xxx.c or vc.c file. */ -static const struct omap_vc_common_data omap4_vc_common = { +static const struct omap_vc_common omap4_vc_common = { .prm_mod = OMAP4430_PRM_DEVICE_INST, .smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET, .smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET, @@ -47,8 +47,8 @@ static const struct omap_vc_common_data omap4_vc_common = { }; /* VC instance data for each controllable voltage line */ -struct omap_vc_instance_data omap4_vc_mpu_data = { - .vc_common = &omap4_vc_common, +struct omap_vc_channel omap4_vc_mpu = { + .common = &omap4_vc_common, .cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_MPU_L_OFFSET, .smps_sa_shift = OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_SHIFT, .smps_sa_mask = OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_MASK, @@ -56,8 +56,8 @@ struct omap_vc_instance_data omap4_vc_mpu_data = { .smps_volra_mask = OMAP4430_VOLRA_VDD_MPU_L_MASK, }; -struct omap_vc_instance_data omap4_vc_iva_data = { - .vc_common = &omap4_vc_common, +struct omap_vc_channel omap4_vc_iva = { + .common = &omap4_vc_common, .cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_IVA_L_OFFSET, .smps_sa_shift = OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_SHIFT, .smps_sa_mask = OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_MASK, @@ -65,8 +65,8 @@ struct omap_vc_instance_data omap4_vc_iva_data = { .smps_volra_mask = OMAP4430_VOLRA_VDD_IVA_L_MASK, }; -struct omap_vc_instance_data omap4_vc_core_data = { - .vc_common = &omap4_vc_common, +struct omap_vc_channel omap4_vc_core = { + .common = &omap4_vc_common, .cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_CORE_L_OFFSET, .smps_sa_shift = OMAP4430_SA_VDD_CORE_L_0_6_SHIFT, .smps_sa_mask = OMAP4430_SA_VDD_CORE_L_0_6_MASK, diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index 6ba6e493c757..c6352e3230b7 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -769,7 +769,7 @@ void omap_change_voltscale_method(struct voltagedomain *voltdm, vdd->volt_scale = vp_forceupdate_scale_voltage; return; case VOLTSCALE_VCBYPASS: - vdd->volt_scale = omap_vc_bypass_scale_voltage; + vdd->volt_scale = omap_vc_bypass_scale; return; default: pr_warning("%s: Trying to change the method of voltage scaling" @@ -802,10 +802,12 @@ int __init omap_voltage_late_init(void) if (!voltdm->scalable) continue; + if (voltdm->vc) + omap_vc_init_channel(voltdm); + if (voltdm->vdd) { if (omap_vdd_data_configure(voltdm)) continue; - omap_vc_init_channel(voltdm); vp_init(voltdm); vdd_debugfs_init(voltdm); } diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h index 5063ab33af7b..488576497c88 100644 --- a/arch/arm/mach-omap2/voltage.h +++ b/arch/arm/mach-omap2/voltage.h @@ -58,6 +58,7 @@ struct omap_vfsm_instance_data { * @scalable: Whether or not this voltage domain is scalable * @node: list_head linking all voltage domains * @pwrdm_list: list_head linking all powerdomains in this voltagedomain + * @vc: pointer to VC channel associated with this voltagedomain * @vdd: to be removed */ struct voltagedomain { @@ -65,6 +66,8 @@ struct voltagedomain { bool scalable; struct list_head node; struct list_head pwrdm_list; + struct omap_vc_channel *vc; + struct omap_vdd_info *vdd; }; @@ -124,8 +127,6 @@ struct omap_volt_pmic_info { * @vp_data : the register values, shifts, masks for various * vp registers * @vp_rt_data : VP data derived at runtime, not predefined - * @vc_data : structure containing various various vc registers, - * shifts, masks etc. * @vfsm : voltage manager FSM data * @debug_dir : debug directory for this voltage domain. * @curr_volt : current voltage for this vdd. @@ -138,7 +139,6 @@ struct omap_vdd_info { struct omap_volt_pmic_info *pmic_info; struct omap_vp_instance_data *vp_data; struct omap_vp_runtime_data vp_rt_data; - struct omap_vc_instance_data *vc_data; const struct omap_vfsm_instance_data *vfsm; struct dentry *debug_dir; u32 curr_volt; diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c index d7e1052d2cdb..7cb27ec64890 100644 --- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c +++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c @@ -41,7 +41,6 @@ static struct omap_vdd_info omap3_vdd1_info = { .prm_irqst_mod = OCP_MOD, .prm_irqst_reg = OMAP3_PRM_IRQSTATUS_MPU_OFFSET, .vp_data = &omap3_vp1_data, - .vc_data = &omap3_vc1_data, .vfsm = &omap3_vdd1_vfsm_data, }; @@ -55,19 +54,20 @@ static struct omap_vdd_info omap3_vdd2_info = { .prm_irqst_mod = OCP_MOD, .prm_irqst_reg = OMAP3_PRM_IRQSTATUS_MPU_OFFSET, .vp_data = &omap3_vp2_data, - .vc_data = &omap3_vc2_data, .vfsm = &omap3_vdd2_vfsm_data, }; static struct voltagedomain omap3_voltdm_mpu = { .name = "mpu_iva", .scalable = true, + .vc = &omap3_vc_mpu, .vdd = &omap3_vdd1_info, }; static struct voltagedomain omap3_voltdm_core = { .name = "core", .scalable = true, + .vc = &omap3_vc_core, .vdd = &omap3_vdd2_info, }; diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c b/arch/arm/mach-omap2/voltagedomains44xx_data.c index 9a17b5ebf665..a05d90ab6869 100644 --- a/arch/arm/mach-omap2/voltagedomains44xx_data.c +++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c @@ -40,7 +40,6 @@ static struct omap_vdd_info omap4_vdd_mpu_info = { .prm_irqst_mod = OMAP4430_PRM_OCP_SOCKET_INST, .prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET, .vp_data = &omap4_vp_mpu_data, - .vc_data = &omap4_vc_mpu_data, .vfsm = &omap4_vdd_mpu_vfsm_data, }; @@ -52,7 +51,6 @@ static struct omap_vdd_info omap4_vdd_iva_info = { .prm_irqst_mod = OMAP4430_PRM_OCP_SOCKET_INST, .prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_OFFSET, .vp_data = &omap4_vp_iva_data, - .vc_data = &omap4_vc_iva_data, .vfsm = &omap4_vdd_iva_vfsm_data, }; @@ -64,25 +62,27 @@ static struct omap_vdd_info omap4_vdd_core_info = { .prm_irqst_mod = OMAP4430_PRM_OCP_SOCKET_INST, .prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_OFFSET, .vp_data = &omap4_vp_core_data, - .vc_data = &omap4_vc_core_data, .vfsm = &omap4_vdd_core_vfsm_data, }; static struct voltagedomain omap4_voltdm_mpu = { .name = "mpu", .scalable = true, + .vc = &omap4_vc_mpu, .vdd = &omap4_vdd_mpu_info, }; static struct voltagedomain omap4_voltdm_iva = { .name = "iva", .scalable = true, + .vc = &omap4_vc_iva, .vdd = &omap4_vdd_iva_info, }; static struct voltagedomain omap4_voltdm_core = { .name = "core", .scalable = true, + .vc = &omap4_vc_core, .vdd = &omap4_vdd_core_info, }; -- cgit v1.2.3 From 4d47506a85a9f2e745dc63215594e9f799aff3dc Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 18 Jul 2011 15:48:22 -0700 Subject: OMAP2+: voltage: enable VC bypass scale method when VC is initialized VC is initialized first, set default scaling method to VC bypass. If/when VP is initialized, default scaling method will be changed to VP force-update. Enabling VC bypass as default as soon as VC is initialized allows for VC bypass scaling to work when no VP is configured/initialized for a given voltage domain. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/voltage.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index c6352e3230b7..e1a22a3d2f03 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -802,8 +802,10 @@ int __init omap_voltage_late_init(void) if (!voltdm->scalable) continue; - if (voltdm->vc) + if (voltdm->vc) { + voltdm->vdd->volt_scale = omap_vc_bypass_scale; omap_vc_init_channel(voltdm); + } if (voltdm->vdd) { if (omap_vdd_data_configure(voltdm)) -- cgit v1.2.3 From 01f48d308db1cfcfb0151d8d91153fd73e84ae40 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 21 Mar 2011 14:29:13 -0700 Subject: OMAP2+: voltage: split out voltage processor (VP) code into new layer This patch is primarily a move of VP specific code from voltage.c into its own code in vp.c and adds prototypes to vp.h No functional changes, except debugfs... VP debugfs moved to 'vp' subdir of /voltage/ and 'vp_' prefixes removed from all debugfs filenames. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/Makefile | 2 +- arch/arm/mach-omap2/voltage.c | 348 +-------------------------------------- arch/arm/mach-omap2/voltage.h | 3 - arch/arm/mach-omap2/vp.c | 374 ++++++++++++++++++++++++++++++++++++++++++ arch/arm/mach-omap2/vp.h | 9 + 5 files changed, 387 insertions(+), 349 deletions(-) create mode 100644 arch/arm/mach-omap2/vp.c diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 59db6d9ba244..824718969e31 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -90,7 +90,7 @@ obj-$(CONFIG_ARCH_OMAP4) += prcm.o cm2xxx_3xxx.o cminst44xx.o \ # OMAP voltage domains ifeq ($(CONFIG_PM),y) -voltagedomain-common := voltage.o vc.o +voltagedomain-common := voltage.o vc.o vp.o obj-$(CONFIG_ARCH_OMAP2) += $(voltagedomain-common) \ voltagedomains2xxx_data.o obj-$(CONFIG_ARCH_OMAP3) += $(voltagedomain-common) \ diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index e1a22a3d2f03..9b9f01973d12 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -46,10 +46,6 @@ static LIST_HEAD(voltdm_list); #define VOLTAGE_DIR_SIZE 16 static struct dentry *voltage_dir; -/* Init function pointers */ -static int vp_forceupdate_scale_voltage(struct voltagedomain *voltdm, - unsigned long target_volt); - static u32 omap3_voltage_read_reg(u16 mod, u8 offset) { return omap2_prm_read_mod_reg(mod, offset); @@ -105,7 +101,7 @@ static int __init _config_common_vdd_data(struct voltagedomain *voltdm) sys_clk_speed /= 1000; /* Generic voltage parameters */ - vdd->volt_scale = vp_forceupdate_scale_voltage; + vdd->volt_scale = omap_vp_forceupdate_scale; vdd->vp_enabled = false; vdd->vp_rt_data.vpconfig_erroroffset = @@ -127,30 +123,6 @@ static int __init _config_common_vdd_data(struct voltagedomain *voltdm) return 0; } -/* Voltage debugfs support */ -static int vp_volt_debug_get(void *data, u64 *val) -{ - struct voltagedomain *voltdm = (struct voltagedomain *)data; - struct omap_vdd_info *vdd = voltdm->vdd; - u8 vsel; - - if (!vdd) { - pr_warning("Wrong paramater passed\n"); - return -EINVAL; - } - - vsel = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->voltage); - - if (!vdd->pmic_info->vsel_to_uv) { - pr_warning("PMIC function to convert vsel to voltage" - "in uV not registerd\n"); - return -EINVAL; - } - - *val = vdd->pmic_info->vsel_to_uv(vsel); - return 0; -} - static int nom_volt_debug_get(void *data, u64 *val) { struct voltagedomain *voltdm = (struct voltagedomain *)data; @@ -165,85 +137,8 @@ static int nom_volt_debug_get(void *data, u64 *val) return 0; } -DEFINE_SIMPLE_ATTRIBUTE(vp_volt_debug_fops, vp_volt_debug_get, NULL, "%llu\n"); DEFINE_SIMPLE_ATTRIBUTE(nom_volt_debug_fops, nom_volt_debug_get, NULL, "%llu\n"); -static void vp_latch_vsel(struct voltagedomain *voltdm) -{ - u32 vpconfig; - unsigned long uvdc; - char vsel; - struct omap_vdd_info *vdd = voltdm->vdd; - - uvdc = omap_voltage_get_nom_volt(voltdm); - if (!uvdc) { - pr_warning("%s: unable to find current voltage for vdd_%s\n", - __func__, voltdm->name); - return; - } - - if (!vdd->pmic_info || !vdd->pmic_info->uv_to_vsel) { - pr_warning("%s: PMIC function to convert voltage in uV to" - " vsel not registered\n", __func__); - return; - } - - vsel = vdd->pmic_info->uv_to_vsel(uvdc); - - vpconfig = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig); - vpconfig &= ~(vdd->vp_data->vp_common->vpconfig_initvoltage_mask | - vdd->vp_data->vp_common->vpconfig_initvdd); - vpconfig |= vsel << vdd->vp_data->vp_common->vpconfig_initvoltage_shift; - - vdd->write_reg(vpconfig, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig); - - /* Trigger initVDD value copy to voltage processor */ - vdd->write_reg((vpconfig | vdd->vp_data->vp_common->vpconfig_initvdd), - vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig); - - /* Clear initVDD copy trigger bit */ - vdd->write_reg(vpconfig, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig); -} - -/* Generic voltage init functions */ -static void __init vp_init(struct voltagedomain *voltdm) -{ - struct omap_vdd_info *vdd = voltdm->vdd; - u32 vp_val; - - if (!vdd->read_reg || !vdd->write_reg) { - pr_err("%s: No read/write API for accessing vdd_%s regs\n", - __func__, voltdm->name); - return; - } - - vp_val = vdd->vp_rt_data.vpconfig_erroroffset | - (vdd->vp_rt_data.vpconfig_errorgain << - vdd->vp_data->vp_common->vpconfig_errorgain_shift) | - vdd->vp_data->vp_common->vpconfig_timeouten; - vdd->write_reg(vp_val, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig); - - vp_val = ((vdd->vp_rt_data.vstepmin_smpswaittimemin << - vdd->vp_data->vp_common->vstepmin_smpswaittimemin_shift) | - (vdd->vp_rt_data.vstepmin_stepmin << - vdd->vp_data->vp_common->vstepmin_stepmin_shift)); - vdd->write_reg(vp_val, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vstepmin); - - vp_val = ((vdd->vp_rt_data.vstepmax_smpswaittimemax << - vdd->vp_data->vp_common->vstepmax_smpswaittimemax_shift) | - (vdd->vp_rt_data.vstepmax_stepmax << - vdd->vp_data->vp_common->vstepmax_stepmax_shift)); - vdd->write_reg(vp_val, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vstepmax); - - vp_val = ((vdd->vp_rt_data.vlimitto_vddmax << - vdd->vp_data->vp_common->vlimitto_vddmax_shift) | - (vdd->vp_rt_data.vlimitto_vddmin << - vdd->vp_data->vp_common->vlimitto_vddmin_shift) | - (vdd->vp_rt_data.vlimitto_timeout << - vdd->vp_data->vp_common->vlimitto_timeout_shift)); - vdd->write_reg(vp_val, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vlimitto); -} - static void __init vdd_debugfs_init(struct voltagedomain *voltdm) { char *name; @@ -268,125 +163,11 @@ static void __init vdd_debugfs_init(struct voltagedomain *voltdm) return; } - (void) debugfs_create_x16("vp_errorgain", S_IRUGO, vdd->debug_dir, - &(vdd->vp_rt_data.vpconfig_errorgain)); - (void) debugfs_create_x16("vp_smpswaittimemin", S_IRUGO, - vdd->debug_dir, - &(vdd->vp_rt_data.vstepmin_smpswaittimemin)); - (void) debugfs_create_x8("vp_stepmin", S_IRUGO, vdd->debug_dir, - &(vdd->vp_rt_data.vstepmin_stepmin)); - (void) debugfs_create_x16("vp_smpswaittimemax", S_IRUGO, - vdd->debug_dir, - &(vdd->vp_rt_data.vstepmax_smpswaittimemax)); - (void) debugfs_create_x8("vp_stepmax", S_IRUGO, vdd->debug_dir, - &(vdd->vp_rt_data.vstepmax_stepmax)); - (void) debugfs_create_x8("vp_vddmax", S_IRUGO, vdd->debug_dir, - &(vdd->vp_rt_data.vlimitto_vddmax)); - (void) debugfs_create_x8("vp_vddmin", S_IRUGO, vdd->debug_dir, - &(vdd->vp_rt_data.vlimitto_vddmin)); - (void) debugfs_create_x16("vp_timeout", S_IRUGO, vdd->debug_dir, - &(vdd->vp_rt_data.vlimitto_timeout)); - (void) debugfs_create_file("curr_vp_volt", S_IRUGO, vdd->debug_dir, - (void *) voltdm, &vp_volt_debug_fops); (void) debugfs_create_file("curr_nominal_volt", S_IRUGO, vdd->debug_dir, (void *) voltdm, &nom_volt_debug_fops); } -/* VP force update method of voltage scaling */ -static int vp_forceupdate_scale_voltage(struct voltagedomain *voltdm, - unsigned long target_volt) -{ - struct omap_vdd_info *vdd = voltdm->vdd; - u32 vpconfig; - u8 target_vsel, current_vsel; - int ret, timeout = 0; - - ret = omap_vc_pre_scale(voltdm, target_volt, &target_vsel, ¤t_vsel); - if (ret) - return ret; - - /* - * Clear all pending TransactionDone interrupt/status. Typical latency - * is <3us - */ - while (timeout++ < VP_TRANXDONE_TIMEOUT) { - vdd->write_reg(vdd->vp_data->prm_irqst_data->tranxdone_status, - vdd->prm_irqst_mod, vdd->prm_irqst_reg); - if (!(vdd->read_reg(vdd->prm_irqst_mod, vdd->prm_irqst_reg) & - vdd->vp_data->prm_irqst_data->tranxdone_status)) - break; - udelay(1); - } - if (timeout >= VP_TRANXDONE_TIMEOUT) { - pr_warning("%s: vdd_%s TRANXDONE timeout exceeded." - "Voltage change aborted", __func__, voltdm->name); - return -ETIMEDOUT; - } - - /* Configure for VP-Force Update */ - vpconfig = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig); - vpconfig &= ~(vdd->vp_data->vp_common->vpconfig_initvdd | - vdd->vp_data->vp_common->vpconfig_forceupdate | - vdd->vp_data->vp_common->vpconfig_initvoltage_mask); - vpconfig |= ((target_vsel << - vdd->vp_data->vp_common->vpconfig_initvoltage_shift)); - vdd->write_reg(vpconfig, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig); - - /* Trigger initVDD value copy to voltage processor */ - vpconfig |= vdd->vp_data->vp_common->vpconfig_initvdd; - vdd->write_reg(vpconfig, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig); - - /* Force update of voltage */ - vpconfig |= vdd->vp_data->vp_common->vpconfig_forceupdate; - vdd->write_reg(vpconfig, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig); - - /* - * Wait for TransactionDone. Typical latency is <200us. - * Depends on SMPSWAITTIMEMIN/MAX and voltage change - */ - timeout = 0; - omap_test_timeout((vdd->read_reg(vdd->prm_irqst_mod, - vdd->prm_irqst_reg) & - vdd->vp_data->prm_irqst_data->tranxdone_status), - VP_TRANXDONE_TIMEOUT, timeout); - if (timeout >= VP_TRANXDONE_TIMEOUT) - pr_err("%s: vdd_%s TRANXDONE timeout exceeded." - "TRANXDONE never got set after the voltage update\n", - __func__, voltdm->name); - - omap_vc_post_scale(voltdm, target_volt, target_vsel, current_vsel); - - /* - * Disable TransactionDone interrupt , clear all status, clear - * control registers - */ - timeout = 0; - while (timeout++ < VP_TRANXDONE_TIMEOUT) { - vdd->write_reg(vdd->vp_data->prm_irqst_data->tranxdone_status, - vdd->prm_irqst_mod, vdd->prm_irqst_reg); - if (!(vdd->read_reg(vdd->prm_irqst_mod, vdd->prm_irqst_reg) & - vdd->vp_data->prm_irqst_data->tranxdone_status)) - break; - udelay(1); - } - - if (timeout >= VP_TRANXDONE_TIMEOUT) - pr_warning("%s: vdd_%s TRANXDONE timeout exceeded while trying" - "to clear the TRANXDONE status\n", - __func__, voltdm->name); - - vpconfig = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig); - /* Clear initVDD copy trigger bit */ - vpconfig &= ~vdd->vp_data->vp_common->vpconfig_initvdd; - vdd->write_reg(vpconfig, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig); - /* Clear force bit */ - vpconfig &= ~vdd->vp_data->vp_common->vpconfig_forceupdate; - vdd->write_reg(vpconfig, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig); - - return 0; -} - static int __init omap_vdd_data_configure(struct voltagedomain *voltdm) { struct omap_vdd_info *vdd = voltdm->vdd; @@ -438,129 +219,6 @@ unsigned long omap_voltage_get_nom_volt(struct voltagedomain *voltdm) return vdd->curr_volt; } -/** - * omap_vp_get_curr_volt() - API to get the current vp voltage. - * @voltdm: pointer to the VDD. - * - * This API returns the current voltage for the specified voltage processor - */ -unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm) -{ - struct omap_vdd_info *vdd; - u8 curr_vsel; - - if (!voltdm || IS_ERR(voltdm)) { - pr_warning("%s: VDD specified does not exist!\n", __func__); - return 0; - } - - vdd = voltdm->vdd; - if (!vdd->read_reg) { - pr_err("%s: No read API for reading vdd_%s regs\n", - __func__, voltdm->name); - return 0; - } - - curr_vsel = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->voltage); - - if (!vdd->pmic_info || !vdd->pmic_info->vsel_to_uv) { - pr_warning("%s: PMIC function to convert vsel to voltage" - "in uV not registerd\n", __func__); - return 0; - } - - return vdd->pmic_info->vsel_to_uv(curr_vsel); -} - -/** - * omap_vp_enable() - API to enable a particular VP - * @voltdm: pointer to the VDD whose VP is to be enabled. - * - * This API enables a particular voltage processor. Needed by the smartreflex - * class drivers. - */ -void omap_vp_enable(struct voltagedomain *voltdm) -{ - struct omap_vdd_info *vdd; - u32 vpconfig; - - if (!voltdm || IS_ERR(voltdm)) { - pr_warning("%s: VDD specified does not exist!\n", __func__); - return; - } - - vdd = voltdm->vdd; - if (!vdd->read_reg || !vdd->write_reg) { - pr_err("%s: No read/write API for accessing vdd_%s regs\n", - __func__, voltdm->name); - return; - } - - /* If VP is already enabled, do nothing. Return */ - if (vdd->vp_enabled) - return; - - vp_latch_vsel(voltdm); - - /* Enable VP */ - vpconfig = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig); - vpconfig |= vdd->vp_data->vp_common->vpconfig_vpenable; - vdd->write_reg(vpconfig, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig); - vdd->vp_enabled = true; -} - -/** - * omap_vp_disable() - API to disable a particular VP - * @voltdm: pointer to the VDD whose VP is to be disabled. - * - * This API disables a particular voltage processor. Needed by the smartreflex - * class drivers. - */ -void omap_vp_disable(struct voltagedomain *voltdm) -{ - struct omap_vdd_info *vdd; - u32 vpconfig; - int timeout; - - if (!voltdm || IS_ERR(voltdm)) { - pr_warning("%s: VDD specified does not exist!\n", __func__); - return; - } - - vdd = voltdm->vdd; - if (!vdd->read_reg || !vdd->write_reg) { - pr_err("%s: No read/write API for accessing vdd_%s regs\n", - __func__, voltdm->name); - return; - } - - /* If VP is already disabled, do nothing. Return */ - if (!vdd->vp_enabled) { - pr_warning("%s: Trying to disable VP for vdd_%s when" - "it is already disabled\n", __func__, voltdm->name); - return; - } - - /* Disable VP */ - vpconfig = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig); - vpconfig &= ~vdd->vp_data->vp_common->vpconfig_vpenable; - vdd->write_reg(vpconfig, vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vpconfig); - - /* - * Wait for VP idle Typical latency is <2us. Maximum latency is ~100us - */ - omap_test_timeout((vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->vstatus)), - VP_IDLE_TIMEOUT, timeout); - - if (timeout >= VP_IDLE_TIMEOUT) - pr_warning("%s: vdd_%s idle timedout\n", - __func__, voltdm->name); - - vdd->vp_enabled = false; - - return; -} - /** * omap_voltage_scale_vdd() - API to scale voltage of a particular * voltage domain. @@ -766,7 +424,7 @@ void omap_change_voltscale_method(struct voltagedomain *voltdm, switch (voltscale_method) { case VOLTSCALE_VPFORCEUPDATE: - vdd->volt_scale = vp_forceupdate_scale_voltage; + vdd->volt_scale = omap_vp_forceupdate_scale; return; case VOLTSCALE_VCBYPASS: vdd->volt_scale = omap_vc_bypass_scale; @@ -810,8 +468,8 @@ int __init omap_voltage_late_init(void) if (voltdm->vdd) { if (omap_vdd_data_configure(voltdm)) continue; - vp_init(voltdm); vdd_debugfs_init(voltdm); + omap_vp_init(voltdm); } } diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h index 488576497c88..ea6bb98c63f8 100644 --- a/arch/arm/mach-omap2/voltage.h +++ b/arch/arm/mach-omap2/voltage.h @@ -152,9 +152,6 @@ struct omap_vdd_info { unsigned long target_volt); }; -unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm); -void omap_vp_enable(struct voltagedomain *voltdm); -void omap_vp_disable(struct voltagedomain *voltdm); int omap_voltage_scale_vdd(struct voltagedomain *voltdm, unsigned long target_volt); void omap_voltage_reset(struct voltagedomain *voltdm); diff --git a/arch/arm/mach-omap2/vp.c b/arch/arm/mach-omap2/vp.c new file mode 100644 index 000000000000..f3503de5d8fd --- /dev/null +++ b/arch/arm/mach-omap2/vp.c @@ -0,0 +1,374 @@ +#include +#include +#include + +#include + +#include "voltage.h" +#include "vp.h" +#include "prm-regbits-34xx.h" +#include "prm-regbits-44xx.h" +#include "prm44xx.h" + +static void __init vp_debugfs_init(struct voltagedomain *voltdm); + +static void vp_latch_vsel(struct voltagedomain *voltdm) +{ + struct omap_vp_instance_data *vp = voltdm->vdd->vp_data; + u32 vpconfig; + unsigned long uvdc; + char vsel; + struct omap_vdd_info *vdd = voltdm->vdd; + + uvdc = omap_voltage_get_nom_volt(voltdm); + if (!uvdc) { + pr_warning("%s: unable to find current voltage for vdd_%s\n", + __func__, voltdm->name); + return; + } + + if (!vdd->pmic_info || !vdd->pmic_info->uv_to_vsel) { + pr_warning("%s: PMIC function to convert voltage in uV to" + " vsel not registered\n", __func__); + return; + } + + vsel = vdd->pmic_info->uv_to_vsel(uvdc); + + vpconfig = vdd->read_reg(vp->vp_common->prm_mod, vp->vpconfig); + vpconfig &= ~(vp->vp_common->vpconfig_initvoltage_mask | + vp->vp_common->vpconfig_initvdd); + vpconfig |= vsel << vp->vp_common->vpconfig_initvoltage_shift; + + vdd->write_reg(vpconfig, vp->vp_common->prm_mod, vp->vpconfig); + + /* Trigger initVDD value copy to voltage processor */ + vdd->write_reg((vpconfig | vp->vp_common->vpconfig_initvdd), + vp->vp_common->prm_mod, vp->vpconfig); + + /* Clear initVDD copy trigger bit */ + vdd->write_reg(vpconfig, vp->vp_common->prm_mod, vp->vpconfig); +} + +/* Generic voltage init functions */ +void __init omap_vp_init(struct voltagedomain *voltdm) +{ + struct omap_vp_instance_data *vp = voltdm->vdd->vp_data; + struct omap_vdd_info *vdd = voltdm->vdd; + u32 vp_val; + + if (!vdd->read_reg || !vdd->write_reg) { + pr_err("%s: No read/write API for accessing vdd_%s regs\n", + __func__, voltdm->name); + return; + } + + vp_val = vdd->vp_rt_data.vpconfig_erroroffset | + (vdd->vp_rt_data.vpconfig_errorgain << + vp->vp_common->vpconfig_errorgain_shift) | + vp->vp_common->vpconfig_timeouten; + vdd->write_reg(vp_val, vp->vp_common->prm_mod, vp->vpconfig); + + vp_val = ((vdd->vp_rt_data.vstepmin_smpswaittimemin << + vp->vp_common->vstepmin_smpswaittimemin_shift) | + (vdd->vp_rt_data.vstepmin_stepmin << + vp->vp_common->vstepmin_stepmin_shift)); + vdd->write_reg(vp_val, vp->vp_common->prm_mod, vp->vstepmin); + + vp_val = ((vdd->vp_rt_data.vstepmax_smpswaittimemax << + vp->vp_common->vstepmax_smpswaittimemax_shift) | + (vdd->vp_rt_data.vstepmax_stepmax << + vp->vp_common->vstepmax_stepmax_shift)); + vdd->write_reg(vp_val, vp->vp_common->prm_mod, vp->vstepmax); + + vp_val = ((vdd->vp_rt_data.vlimitto_vddmax << + vp->vp_common->vlimitto_vddmax_shift) | + (vdd->vp_rt_data.vlimitto_vddmin << + vp->vp_common->vlimitto_vddmin_shift) | + (vdd->vp_rt_data.vlimitto_timeout << + vp->vp_common->vlimitto_timeout_shift)); + vdd->write_reg(vp_val, vp->vp_common->prm_mod, vp->vlimitto); + + vp_debugfs_init(voltdm); +} + +/* VP force update method of voltage scaling */ +int omap_vp_forceupdate_scale(struct voltagedomain *voltdm, + unsigned long target_volt) +{ + struct omap_vp_instance_data *vp = voltdm->vdd->vp_data; + struct omap_vdd_info *vdd = voltdm->vdd; + u32 vpconfig; + u8 target_vsel, current_vsel; + int ret, timeout = 0; + + ret = omap_vc_pre_scale(voltdm, target_volt, &target_vsel, ¤t_vsel); + if (ret) + return ret; + + /* + * Clear all pending TransactionDone interrupt/status. Typical latency + * is <3us + */ + while (timeout++ < VP_TRANXDONE_TIMEOUT) { + vdd->write_reg(vp->prm_irqst_data->tranxdone_status, + vdd->prm_irqst_mod, vdd->prm_irqst_reg); + if (!(vdd->read_reg(vdd->prm_irqst_mod, vdd->prm_irqst_reg) & + vp->prm_irqst_data->tranxdone_status)) + break; + udelay(1); + } + if (timeout >= VP_TRANXDONE_TIMEOUT) { + pr_warning("%s: vdd_%s TRANXDONE timeout exceeded." + "Voltage change aborted", __func__, voltdm->name); + return -ETIMEDOUT; + } + + /* Configure for VP-Force Update */ + vpconfig = vdd->read_reg(vp->vp_common->prm_mod, vp->vpconfig); + vpconfig &= ~(vp->vp_common->vpconfig_initvdd | + vp->vp_common->vpconfig_forceupdate | + vp->vp_common->vpconfig_initvoltage_mask); + vpconfig |= ((target_vsel << + vp->vp_common->vpconfig_initvoltage_shift)); + vdd->write_reg(vpconfig, vp->vp_common->prm_mod, vp->vpconfig); + + /* Trigger initVDD value copy to voltage processor */ + vpconfig |= vp->vp_common->vpconfig_initvdd; + vdd->write_reg(vpconfig, vp->vp_common->prm_mod, vp->vpconfig); + + /* Force update of voltage */ + vpconfig |= vp->vp_common->vpconfig_forceupdate; + vdd->write_reg(vpconfig, vp->vp_common->prm_mod, vp->vpconfig); + + /* + * Wait for TransactionDone. Typical latency is <200us. + * Depends on SMPSWAITTIMEMIN/MAX and voltage change + */ + timeout = 0; + omap_test_timeout((vdd->read_reg(vdd->prm_irqst_mod, + vdd->prm_irqst_reg) & + vp->prm_irqst_data->tranxdone_status), + VP_TRANXDONE_TIMEOUT, timeout); + if (timeout >= VP_TRANXDONE_TIMEOUT) + pr_err("%s: vdd_%s TRANXDONE timeout exceeded." + "TRANXDONE never got set after the voltage update\n", + __func__, voltdm->name); + + omap_vc_post_scale(voltdm, target_volt, target_vsel, current_vsel); + + /* + * Disable TransactionDone interrupt , clear all status, clear + * control registers + */ + timeout = 0; + while (timeout++ < VP_TRANXDONE_TIMEOUT) { + vdd->write_reg(vp->prm_irqst_data->tranxdone_status, + vdd->prm_irqst_mod, vdd->prm_irqst_reg); + if (!(vdd->read_reg(vdd->prm_irqst_mod, vdd->prm_irqst_reg) & + vp->prm_irqst_data->tranxdone_status)) + break; + udelay(1); + } + + if (timeout >= VP_TRANXDONE_TIMEOUT) + pr_warning("%s: vdd_%s TRANXDONE timeout exceeded while trying" + "to clear the TRANXDONE status\n", + __func__, voltdm->name); + + vpconfig = vdd->read_reg(vp->vp_common->prm_mod, vp->vpconfig); + /* Clear initVDD copy trigger bit */ + vpconfig &= ~vp->vp_common->vpconfig_initvdd; + vdd->write_reg(vpconfig, vp->vp_common->prm_mod, vp->vpconfig); + /* Clear force bit */ + vpconfig &= ~vp->vp_common->vpconfig_forceupdate; + vdd->write_reg(vpconfig, vp->vp_common->prm_mod, vp->vpconfig); + + return 0; +} + +/** + * omap_vp_get_curr_volt() - API to get the current vp voltage. + * @voltdm: pointer to the VDD. + * + * This API returns the current voltage for the specified voltage processor + */ +unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm) +{ + struct omap_vp_instance_data *vp = voltdm->vdd->vp_data; + struct omap_vdd_info *vdd; + u8 curr_vsel; + + if (!voltdm || IS_ERR(voltdm)) { + pr_warning("%s: VDD specified does not exist!\n", __func__); + return 0; + } + + vdd = voltdm->vdd; + if (!vdd->read_reg) { + pr_err("%s: No read API for reading vdd_%s regs\n", + __func__, voltdm->name); + return 0; + } + + curr_vsel = vdd->read_reg(vp->vp_common->prm_mod, vp->voltage); + + if (!vdd->pmic_info || !vdd->pmic_info->vsel_to_uv) { + pr_warning("%s: PMIC function to convert vsel to voltage" + "in uV not registerd\n", __func__); + return 0; + } + + return vdd->pmic_info->vsel_to_uv(curr_vsel); +} + +/** + * omap_vp_enable() - API to enable a particular VP + * @voltdm: pointer to the VDD whose VP is to be enabled. + * + * This API enables a particular voltage processor. Needed by the smartreflex + * class drivers. + */ +void omap_vp_enable(struct voltagedomain *voltdm) +{ + struct omap_vp_instance_data *vp; + struct omap_vdd_info *vdd; + u32 vpconfig; + + if (!voltdm || IS_ERR(voltdm)) { + pr_warning("%s: VDD specified does not exist!\n", __func__); + return; + } + + vdd = voltdm->vdd; + vp = voltdm->vdd->vp_data; + if (!vdd->read_reg || !vdd->write_reg) { + pr_err("%s: No read/write API for accessing vdd_%s regs\n", + __func__, voltdm->name); + return; + } + + /* If VP is already enabled, do nothing. Return */ + if (vdd->vp_enabled) + return; + + vp_latch_vsel(voltdm); + + /* Enable VP */ + vpconfig = vdd->read_reg(vp->vp_common->prm_mod, vp->vpconfig); + vpconfig |= vp->vp_common->vpconfig_vpenable; + vdd->write_reg(vpconfig, vp->vp_common->prm_mod, vp->vpconfig); + vdd->vp_enabled = true; +} + +/** + * omap_vp_disable() - API to disable a particular VP + * @voltdm: pointer to the VDD whose VP is to be disabled. + * + * This API disables a particular voltage processor. Needed by the smartreflex + * class drivers. + */ +void omap_vp_disable(struct voltagedomain *voltdm) +{ + struct omap_vp_instance_data *vp; + struct omap_vdd_info *vdd; + u32 vpconfig; + int timeout; + + if (!voltdm || IS_ERR(voltdm)) { + pr_warning("%s: VDD specified does not exist!\n", __func__); + return; + } + + vdd = voltdm->vdd; + vp = voltdm->vdd->vp_data; + if (!vdd->read_reg || !vdd->write_reg) { + pr_err("%s: No read/write API for accessing vdd_%s regs\n", + __func__, voltdm->name); + return; + } + + /* If VP is already disabled, do nothing. Return */ + if (!vdd->vp_enabled) { + pr_warning("%s: Trying to disable VP for vdd_%s when" + "it is already disabled\n", __func__, voltdm->name); + return; + } + + /* Disable VP */ + vpconfig = vdd->read_reg(vp->vp_common->prm_mod, vp->vpconfig); + vpconfig &= ~vp->vp_common->vpconfig_vpenable; + vdd->write_reg(vpconfig, vp->vp_common->prm_mod, vp->vpconfig); + + /* + * Wait for VP idle Typical latency is <2us. Maximum latency is ~100us + */ + omap_test_timeout((vdd->read_reg(vp->vp_common->prm_mod, vp->vstatus)), + VP_IDLE_TIMEOUT, timeout); + + if (timeout >= VP_IDLE_TIMEOUT) + pr_warning("%s: vdd_%s idle timedout\n", + __func__, voltdm->name); + + vdd->vp_enabled = false; + + return; +} + +/* Voltage debugfs support */ +static int vp_volt_debug_get(void *data, u64 *val) +{ + struct voltagedomain *voltdm = (struct voltagedomain *)data; + struct omap_vp_instance_data *vp = voltdm->vdd->vp_data; + struct omap_vdd_info *vdd = voltdm->vdd; + u8 vsel; + + if (!vdd) { + pr_warning("Wrong paramater passed\n"); + return -EINVAL; + } + + vsel = vdd->read_reg(vp->vp_common->prm_mod, vp->voltage); + + if (!vdd->pmic_info->vsel_to_uv) { + pr_warning("PMIC function to convert vsel to voltage" + "in uV not registerd\n"); + return -EINVAL; + } + + *val = vdd->pmic_info->vsel_to_uv(vsel); + return 0; +} + +DEFINE_SIMPLE_ATTRIBUTE(vp_volt_debug_fops, vp_volt_debug_get, NULL, "%llu\n"); + +static void __init vp_debugfs_init(struct voltagedomain *voltdm) +{ + struct omap_vdd_info *vdd = voltdm->vdd; + struct dentry *debug_dir; + + debug_dir = debugfs_create_dir("vp", vdd->debug_dir); + if (IS_ERR(debug_dir)) + pr_err("%s: Unable to create VP debugfs dir dir\n", __func__); + + (void) debugfs_create_x16("errorgain", S_IRUGO, debug_dir, + &(vdd->vp_rt_data.vpconfig_errorgain)); + (void) debugfs_create_x16("smpswaittimemin", S_IRUGO, + debug_dir, + &(vdd->vp_rt_data.vstepmin_smpswaittimemin)); + (void) debugfs_create_x8("stepmin", S_IRUGO, debug_dir, + &(vdd->vp_rt_data.vstepmin_stepmin)); + (void) debugfs_create_x16("smpswaittimemax", S_IRUGO, + debug_dir, + &(vdd->vp_rt_data.vstepmax_smpswaittimemax)); + (void) debugfs_create_x8("stepmax", S_IRUGO, debug_dir, + &(vdd->vp_rt_data.vstepmax_stepmax)); + (void) debugfs_create_x8("vddmax", S_IRUGO, debug_dir, + &(vdd->vp_rt_data.vlimitto_vddmax)); + (void) debugfs_create_x8("vddmin", S_IRUGO, debug_dir, + &(vdd->vp_rt_data.vlimitto_vddmin)); + (void) debugfs_create_x16("timeout", S_IRUGO, debug_dir, + &(vdd->vp_rt_data.vlimitto_timeout)); + (void) debugfs_create_file("curr_volt", S_IRUGO, debug_dir, + (void *) voltdm, &vp_volt_debug_fops); +} diff --git a/arch/arm/mach-omap2/vp.h b/arch/arm/mach-omap2/vp.h index 5406b08463b6..025cf164da71 100644 --- a/arch/arm/mach-omap2/vp.h +++ b/arch/arm/mach-omap2/vp.h @@ -19,6 +19,8 @@ #include +struct voltagedomain; + /* XXX document */ #define VP_IDLE_TIMEOUT 200 #define VP_TRANXDONE_TIMEOUT 300 @@ -139,4 +141,11 @@ extern struct omap_vp_instance_data omap4_vp_mpu_data; extern struct omap_vp_instance_data omap4_vp_iva_data; extern struct omap_vp_instance_data omap4_vp_core_data; +void omap_vp_init(struct voltagedomain *voltdm); +void omap_vp_enable(struct voltagedomain *voltdm); +void omap_vp_disable(struct voltagedomain *voltdm); +unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm); +int omap_vp_forceupdate_scale(struct voltagedomain *voltdm, + unsigned long target_volt); + #endif -- cgit v1.2.3 From e74e44054f8297d60fbd2ed1d412d84055afee8c Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 22 Mar 2011 14:12:37 -0700 Subject: OMAP2+: VC: support PMICs with separate voltage and command registers The VC layer can support PMICs with separate voltage and command registers by putting the different registers in the PRM_VC_SMPS_VOL_RA and PRCM_VC_SMPS_CMD_RA registers respectively. The PMIC data must supply at least a voltage register address (volt_reg_addr). The command register address (cmd_reg_addr) is optional. If the PMIC data does not supply a separate command register address, the VC will use the voltage register address for both. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/omap_twl.c | 10 +++++----- arch/arm/mach-omap2/vc.c | 4 ++-- arch/arm/mach-omap2/voltage.h | 5 ++++- 3 files changed, 11 insertions(+), 8 deletions(-) diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c index 760487bcfca6..3249fe3c3c1d 100644 --- a/arch/arm/mach-omap2/omap_twl.c +++ b/arch/arm/mach-omap2/omap_twl.c @@ -158,7 +158,7 @@ static struct omap_volt_pmic_info omap3_mpu_volt_info = { .vp_vddmax = OMAP3430_VP1_VLIMITTO_VDDMAX, .vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US, .i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR, - .pmic_reg = OMAP3_VDD_MPU_SR_CONTROL_REG, + .volt_reg_addr = OMAP3_VDD_MPU_SR_CONTROL_REG, .vsel_to_uv = twl4030_vsel_to_uv, .uv_to_vsel = twl4030_uv_to_vsel, }; @@ -178,7 +178,7 @@ static struct omap_volt_pmic_info omap3_core_volt_info = { .vp_vddmax = OMAP3430_VP2_VLIMITTO_VDDMAX, .vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US, .i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR, - .pmic_reg = OMAP3_VDD_CORE_SR_CONTROL_REG, + .volt_reg_addr = OMAP3_VDD_CORE_SR_CONTROL_REG, .vsel_to_uv = twl4030_vsel_to_uv, .uv_to_vsel = twl4030_uv_to_vsel, }; @@ -198,7 +198,7 @@ static struct omap_volt_pmic_info omap4_mpu_volt_info = { .vp_vddmax = OMAP4_VP_MPU_VLIMITTO_VDDMAX, .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, .i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR, - .pmic_reg = OMAP4_VDD_MPU_SR_VOLT_REG, + .volt_reg_addr = OMAP4_VDD_MPU_SR_VOLT_REG, .vsel_to_uv = twl6030_vsel_to_uv, .uv_to_vsel = twl6030_uv_to_vsel, }; @@ -218,7 +218,7 @@ static struct omap_volt_pmic_info omap4_iva_volt_info = { .vp_vddmax = OMAP4_VP_IVA_VLIMITTO_VDDMAX, .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, .i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR, - .pmic_reg = OMAP4_VDD_IVA_SR_VOLT_REG, + .volt_reg_addr = OMAP4_VDD_IVA_SR_VOLT_REG, .vsel_to_uv = twl6030_vsel_to_uv, .uv_to_vsel = twl6030_uv_to_vsel, }; @@ -238,7 +238,7 @@ static struct omap_volt_pmic_info omap4_core_volt_info = { .vp_vddmax = OMAP4_VP_CORE_VLIMITTO_VDDMAX, .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, .i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR, - .pmic_reg = OMAP4_VDD_CORE_SR_VOLT_REG, + .volt_reg_addr = OMAP4_VDD_CORE_SR_VOLT_REG, .vsel_to_uv = twl6030_vsel_to_uv, .uv_to_vsel = twl6030_uv_to_vsel, }; diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index b62363d9d2b7..1bdbe7c15612 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -115,7 +115,7 @@ int omap_vc_bypass_scale(struct voltagedomain *voltdm, vc_valid = vc->common->valid; vc_bypass_val_reg = vc->common->bypass_val_reg; vc_bypass_value = (target_vsel << vc->common->data_shift) | - (vdd->pmic_info->pmic_reg << + (vdd->pmic_info->volt_reg_addr << vc->common->regaddr_shift) | (vdd->pmic_info->i2c_slave_addr << vc->common->slaveaddr_shift); @@ -264,7 +264,7 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm) vc_val = vdd->read_reg(vc->common->prm_mod, vc->common->smps_volra_reg); vc_val &= ~vc->smps_volra_mask; - vc_val |= vdd->pmic_info->pmic_reg << vc->smps_volra_shift; + vc_val |= vdd->pmic_info->volt_reg_addr << vc->smps_volra_shift; vdd->write_reg(vc_val, vc->common->prm_mod, vc->common->smps_volra_reg); diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h index ea6bb98c63f8..5ca30fca114d 100644 --- a/arch/arm/mach-omap2/voltage.h +++ b/arch/arm/mach-omap2/voltage.h @@ -96,6 +96,8 @@ struct omap_volt_data { * @step_size: PMIC voltage step size (in uv) * @vsel_to_uv: PMIC API to convert vsel value to actual voltage in uV. * @uv_to_vsel: PMIC API to convert voltage in uV to vsel value. + * @volt_reg_addr: voltage configuration register address + * @cmd_reg_addr: command (on, on-LP, ret, off) configuration register address */ struct omap_volt_pmic_info { int slew_rate; @@ -112,7 +114,8 @@ struct omap_volt_pmic_info { u8 vp_vddmax; u8 vp_timeout_us; u8 i2c_slave_addr; - u8 pmic_reg; + u8 volt_reg_addr; + u8 cmd_reg_addr; unsigned long (*vsel_to_uv) (const u8 vsel); u8 (*uv_to_vsel) (unsigned long uV); }; -- cgit v1.2.3 From 58aaa599a97308c0f4a68ef07039157807fa8324 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 28 Mar 2011 10:52:04 -0700 Subject: OMAP2+: add PRM VP functions for checking/clearing VP TX done status Add SoC specific PRM VP helper functions for checking and clearing the VP transaction done status. Longer term, these events should be handled by the forthcoming PRCM interrupt handler. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/prm2xxx_3xxx.c | 41 +++++++++++++++++++++++++++++++ arch/arm/mach-omap2/prm2xxx_3xxx.h | 4 ++++ arch/arm/mach-omap2/prm44xx.c | 49 ++++++++++++++++++++++++++++++++++++++ arch/arm/mach-omap2/prm44xx.h | 4 ++++ arch/arm/mach-omap2/vp.h | 34 ++++++++++++++++---------- arch/arm/mach-omap2/vp3xxx_data.c | 19 +++++++-------- arch/arm/mach-omap2/vp44xx_data.c | 25 +++++++------------ 7 files changed, 137 insertions(+), 39 deletions(-) diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c index 051213fbc346..58c5c878b295 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c @@ -20,6 +20,8 @@ #include #include +#include "vp.h" + #include "prm2xxx_3xxx.h" #include "cm2xxx_3xxx.h" #include "prm-regbits-24xx.h" @@ -156,3 +158,42 @@ int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift) return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0; } + +/* PRM VP */ + +/* + * struct omap3_vp - OMAP3 VP register access description. + * @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg + */ +struct omap3_vp { + u32 tranxdone_status; +}; + +struct omap3_vp omap3_vp[] = { + [OMAP3_VP_VDD_MPU_ID] = { + .tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK, + }, + [OMAP3_VP_VDD_CORE_ID] = { + .tranxdone_status = OMAP3430_VP2_TRANXDONE_ST_MASK, + }, +}; + +#define MAX_VP_ID ARRAY_SIZE(omap3_vp); + +u32 omap3_prm_vp_check_txdone(u8 vp_id) +{ + struct omap3_vp *vp = &omap3_vp[vp_id]; + u32 irqstatus; + + irqstatus = omap2_prm_read_mod_reg(OCP_MOD, + OMAP3_PRM_IRQSTATUS_MPU_OFFSET); + return irqstatus & vp->tranxdone_status; +} + +void omap3_prm_vp_clear_txdone(u8 vp_id) +{ + struct omap3_vp *vp = &omap3_vp[vp_id]; + + omap2_prm_write_mod_reg(vp->tranxdone_status, + OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); +} diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.h b/arch/arm/mach-omap2/prm2xxx_3xxx.h index a1fc62a39dbb..51125268632b 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.h +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.h @@ -303,6 +303,10 @@ extern int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift); extern int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift); extern int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift); +/* OMAP3-specific VP functions */ +u32 omap3_prm_vp_check_txdone(u8 vp_id); +void omap3_prm_vp_clear_txdone(u8 vp_id); + #endif /* CONFIG_ARCH_OMAP4 */ #endif diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index 00165558fc4d..390e32c53b0e 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -21,6 +21,7 @@ #include #include +#include "vp.h" #include "prm44xx.h" #include "prm-regbits-44xx.h" @@ -50,3 +51,51 @@ u32 omap4_prm_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 reg) return v; } + +/* PRM VP */ + +/* + * struct omap4_vp - OMAP4 VP register access description. + * @irqstatus_mpu: offset to IRQSTATUS_MPU register for VP + * @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg + */ +struct omap4_vp { + u32 irqstatus_mpu; + u32 tranxdone_status; +}; + +static struct omap4_vp omap4_vp[] = { + [OMAP4_VP_VDD_MPU_ID] = { + .irqstatus_mpu = OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET, + .tranxdone_status = OMAP4430_VP_MPU_TRANXDONE_ST_MASK, + }, + [OMAP4_VP_VDD_IVA_ID] = { + .irqstatus_mpu = OMAP4_PRM_IRQSTATUS_MPU_OFFSET, + .tranxdone_status = OMAP4430_VP_IVA_TRANXDONE_ST_MASK, + }, + [OMAP4_VP_VDD_CORE_ID] = { + .irqstatus_mpu = OMAP4_PRM_IRQSTATUS_MPU_OFFSET, + .tranxdone_status = OMAP4430_VP_CORE_TRANXDONE_ST_MASK, + }, +}; + +u32 omap4_prm_vp_check_txdone(u8 vp_id) +{ + struct omap4_vp *vp = &omap4_vp[vp_id]; + u32 irqstatus; + + irqstatus = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION, + OMAP4430_PRM_OCP_SOCKET_INST, + vp->irqstatus_mpu); + return irqstatus & vp->tranxdone_status; +} + +void omap4_prm_vp_clear_txdone(u8 vp_id) +{ + struct omap4_vp *vp = &omap4_vp[vp_id]; + + omap4_prminst_write_inst_reg(vp->tranxdone_status, + OMAP4430_PRM_PARTITION, + OMAP4430_PRM_OCP_SOCKET_INST, + vp->irqstatus_mpu); +}; diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h index 7dfa379b625d..b28c87dcbfa1 100644 --- a/arch/arm/mach-omap2/prm44xx.h +++ b/arch/arm/mach-omap2/prm44xx.h @@ -751,6 +751,10 @@ extern u32 omap4_prm_read_inst_reg(s16 inst, u16 idx); extern void omap4_prm_write_inst_reg(u32 val, s16 inst, u16 idx); extern u32 omap4_prm_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx); +/* OMAP4-specific VP functions */ +u32 omap4_prm_vp_check_txdone(u8 vp_id); +void omap4_prm_vp_clear_txdone(u8 vp_id); + # endif #endif diff --git a/arch/arm/mach-omap2/vp.h b/arch/arm/mach-omap2/vp.h index 025cf164da71..1ccf7419a36c 100644 --- a/arch/arm/mach-omap2/vp.h +++ b/arch/arm/mach-omap2/vp.h @@ -21,10 +21,28 @@ struct voltagedomain; +/* + * Voltage Processor (VP) identifiers + */ +#define OMAP3_VP_VDD_MPU_ID 0 +#define OMAP3_VP_VDD_CORE_ID 1 +#define OMAP4_VP_VDD_CORE_ID 0 +#define OMAP4_VP_VDD_IVA_ID 1 +#define OMAP4_VP_VDD_MPU_ID 2 + /* XXX document */ #define VP_IDLE_TIMEOUT 200 #define VP_TRANXDONE_TIMEOUT 300 +/** + * struct omap_vp_ops - per-VP operations + * @check_txdone: check for VP transaction done + * @clear_txdone: clear VP transaction done status + */ +struct omap_vp_ops { + u32 (*check_txdone)(u8 vp_id); + void (*clear_txdone)(u8 vp_id); +}; /** * struct omap_vp_common_data - register data common to all VDDs @@ -68,41 +86,31 @@ struct omap_vp_common_data { u8 vlimitto_vddmin_shift; u8 vlimitto_vddmax_shift; u8 vlimitto_timeout_shift; -}; -/** - * struct omap_vp_prm_irqst_data - PRM_IRQSTATUS_MPU.VP_TRANXDONE_ST data - * @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg - * - * XXX Note that on OMAP3, VP_TRANXDONE interrupt may not work due to a - * hardware bug - * XXX This structure is probably not needed - */ -struct omap_vp_prm_irqst_data { - u32 tranxdone_status; + const struct omap_vp_ops *ops; }; /** * struct omap_vp_instance_data - VP register offsets (per-VDD) * @vp_common: pointer to struct omap_vp_common_data * for this SoC - * @prm_irqst_data: pointer to struct omap_vp_prm_irqst_data for this VDD * @vpconfig: PRM_VP*_CONFIG reg offset from PRM start * @vstepmin: PRM_VP*_VSTEPMIN reg offset from PRM start * @vlimitto: PRM_VP*_VLIMITTO reg offset from PRM start * @vstatus: PRM_VP*_VSTATUS reg offset from PRM start * @voltage: PRM_VP*_VOLTAGE reg offset from PRM start + * @id: Unique identifier for VP instance. * * XXX vp_common is probably not needed since it is per-SoC */ struct omap_vp_instance_data { const struct omap_vp_common_data *vp_common; - const struct omap_vp_prm_irqst_data *prm_irqst_data; u8 vpconfig; u8 vstepmin; u8 vstepmax; u8 vlimitto; u8 vstatus; u8 voltage; + u8 id; }; /** diff --git a/arch/arm/mach-omap2/vp3xxx_data.c b/arch/arm/mach-omap2/vp3xxx_data.c index a8ea0451d0b4..0372c1ab5672 100644 --- a/arch/arm/mach-omap2/vp3xxx_data.c +++ b/arch/arm/mach-omap2/vp3xxx_data.c @@ -25,6 +25,12 @@ #include "voltage.h" #include "vp.h" +#include "prm2xxx_3xxx.h" + +static const struct omap_vp_ops omap3_vp_ops = { + .check_txdone = omap3_prm_vp_check_txdone, + .clear_txdone = omap3_prm_vp_clear_txdone, +}; /* * VP data common to 34xx/36xx chips @@ -48,13 +54,11 @@ static const struct omap_vp_common_data omap3_vp_common = { .vlimitto_vddmin_shift = OMAP3430_VDDMIN_SHIFT, .vlimitto_vddmax_shift = OMAP3430_VDDMAX_SHIFT, .vlimitto_timeout_shift = OMAP3430_TIMEOUT_SHIFT, -}; - -static const struct omap_vp_prm_irqst_data omap3_vp1_prm_irqst_data = { - .tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK, + .ops = &omap3_vp_ops, }; struct omap_vp_instance_data omap3_vp1_data = { + .id = OMAP3_VP_VDD_MPU_ID, .vp_common = &omap3_vp_common, .vpconfig = OMAP3_PRM_VP1_CONFIG_OFFSET, .vstepmin = OMAP3_PRM_VP1_VSTEPMIN_OFFSET, @@ -62,14 +66,10 @@ struct omap_vp_instance_data omap3_vp1_data = { .vlimitto = OMAP3_PRM_VP1_VLIMITTO_OFFSET, .vstatus = OMAP3_PRM_VP1_STATUS_OFFSET, .voltage = OMAP3_PRM_VP1_VOLTAGE_OFFSET, - .prm_irqst_data = &omap3_vp1_prm_irqst_data, -}; - -static const struct omap_vp_prm_irqst_data omap3_vp2_prm_irqst_data = { - .tranxdone_status = OMAP3430_VP2_TRANXDONE_ST_MASK, }; struct omap_vp_instance_data omap3_vp2_data = { + .id = OMAP3_VP_VDD_CORE_ID, .vp_common = &omap3_vp_common, .vpconfig = OMAP3_PRM_VP2_CONFIG_OFFSET, .vstepmin = OMAP3_PRM_VP2_VSTEPMIN_OFFSET, @@ -77,5 +77,4 @@ struct omap_vp_instance_data omap3_vp2_data = { .vlimitto = OMAP3_PRM_VP2_VLIMITTO_OFFSET, .vstatus = OMAP3_PRM_VP2_STATUS_OFFSET, .voltage = OMAP3_PRM_VP2_VOLTAGE_OFFSET, - .prm_irqst_data = &omap3_vp2_prm_irqst_data, }; diff --git a/arch/arm/mach-omap2/vp44xx_data.c b/arch/arm/mach-omap2/vp44xx_data.c index 0957c24b1fa9..738ba04f5cf1 100644 --- a/arch/arm/mach-omap2/vp44xx_data.c +++ b/arch/arm/mach-omap2/vp44xx_data.c @@ -27,6 +27,11 @@ #include "vp.h" +static const struct omap_vp_ops omap4_vp_ops = { + .check_txdone = omap4_prm_vp_check_txdone, + .clear_txdone = omap4_prm_vp_clear_txdone, +}; + /* * VP data common to 44xx chips * XXX This stuff presumably belongs in the vp44xx.c or vp.c file. @@ -49,13 +54,11 @@ static const struct omap_vp_common_data omap4_vp_common = { .vlimitto_vddmin_shift = OMAP4430_VDDMIN_SHIFT, .vlimitto_vddmax_shift = OMAP4430_VDDMAX_SHIFT, .vlimitto_timeout_shift = OMAP4430_TIMEOUT_SHIFT, -}; - -static const struct omap_vp_prm_irqst_data omap4_vp_mpu_prm_irqst_data = { - .tranxdone_status = OMAP4430_VP_MPU_TRANXDONE_ST_MASK, + .ops = &omap4_vp_ops, }; struct omap_vp_instance_data omap4_vp_mpu_data = { + .id = OMAP4_VP_VDD_MPU_ID, .vp_common = &omap4_vp_common, .vpconfig = OMAP4_PRM_VP_MPU_CONFIG_OFFSET, .vstepmin = OMAP4_PRM_VP_MPU_VSTEPMIN_OFFSET, @@ -63,14 +66,10 @@ struct omap_vp_instance_data omap4_vp_mpu_data = { .vlimitto = OMAP4_PRM_VP_MPU_VLIMITTO_OFFSET, .vstatus = OMAP4_PRM_VP_MPU_STATUS_OFFSET, .voltage = OMAP4_PRM_VP_MPU_VOLTAGE_OFFSET, - .prm_irqst_data = &omap4_vp_mpu_prm_irqst_data, -}; - -static const struct omap_vp_prm_irqst_data omap4_vp_iva_prm_irqst_data = { - .tranxdone_status = OMAP4430_VP_IVA_TRANXDONE_ST_MASK, }; struct omap_vp_instance_data omap4_vp_iva_data = { + .id = OMAP4_VP_VDD_IVA_ID, .vp_common = &omap4_vp_common, .vpconfig = OMAP4_PRM_VP_IVA_CONFIG_OFFSET, .vstepmin = OMAP4_PRM_VP_IVA_VSTEPMIN_OFFSET, @@ -78,14 +77,10 @@ struct omap_vp_instance_data omap4_vp_iva_data = { .vlimitto = OMAP4_PRM_VP_IVA_VLIMITTO_OFFSET, .vstatus = OMAP4_PRM_VP_IVA_STATUS_OFFSET, .voltage = OMAP4_PRM_VP_IVA_VOLTAGE_OFFSET, - .prm_irqst_data = &omap4_vp_iva_prm_irqst_data, -}; - -static const struct omap_vp_prm_irqst_data omap4_vp_core_prm_irqst_data = { - .tranxdone_status = OMAP4430_VP_CORE_TRANXDONE_ST_MASK, }; struct omap_vp_instance_data omap4_vp_core_data = { + .id = OMAP4_VP_VDD_CORE_ID, .vp_common = &omap4_vp_common, .vpconfig = OMAP4_PRM_VP_CORE_CONFIG_OFFSET, .vstepmin = OMAP4_PRM_VP_CORE_VSTEPMIN_OFFSET, @@ -93,6 +88,4 @@ struct omap_vp_instance_data omap4_vp_core_data = { .vlimitto = OMAP4_PRM_VP_CORE_VLIMITTO_OFFSET, .vstatus = OMAP4_PRM_VP_CORE_STATUS_OFFSET, .voltage = OMAP4_PRM_VP_CORE_VOLTAGE_OFFSET, - .prm_irqst_data = &omap4_vp_core_prm_irqst_data, }; - -- cgit v1.2.3 From 842ec22852cf843558828e6f7a6da2bf72f341a5 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 28 Mar 2011 11:57:18 -0700 Subject: OMAP3+ VP: replace transaction done check/clear with VP ops Replace the VP tranxdone check/clear with helper functions from the PRM layer. In the process, remove prm_irqst_* voltage structure fields for IRQ status checking which are no longer needed. Since these reads/writes of the IRQ status bits were the only PRM accesses that were not to VC/VP registers, this allows the rest of the register accesses in the VC/VP code to use VC/VP specific register access functions (done in the following patch.) Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/voltage.h | 3 --- arch/arm/mach-omap2/voltagedomains3xxx_data.c | 4 ---- arch/arm/mach-omap2/voltagedomains44xx_data.c | 6 ------ arch/arm/mach-omap2/vp.c | 16 +++++----------- 4 files changed, 5 insertions(+), 24 deletions(-) diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h index 5ca30fca114d..04e06266dbd7 100644 --- a/arch/arm/mach-omap2/voltage.h +++ b/arch/arm/mach-omap2/voltage.h @@ -133,7 +133,6 @@ struct omap_volt_pmic_info { * @vfsm : voltage manager FSM data * @debug_dir : debug directory for this voltage domain. * @curr_volt : current voltage for this vdd. - * @prm_irqst_mod : PRM module id used for PRM IRQ status register access * @vp_enabled : flag to keep track of whether vp is enabled or not * @volt_scale : API to scale the voltage of the vdd. */ @@ -147,8 +146,6 @@ struct omap_vdd_info { u32 curr_volt; bool vp_enabled; - s16 prm_irqst_mod; - u8 prm_irqst_reg; u32 (*read_reg) (u16 mod, u8 offset); void (*write_reg) (u32 val, u16 mod, u8 offset); int (*volt_scale) (struct voltagedomain *voltdm, diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c index 7cb27ec64890..ad8f05b6a889 100644 --- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c +++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c @@ -38,8 +38,6 @@ static const struct omap_vfsm_instance_data omap3_vdd1_vfsm_data = { }; static struct omap_vdd_info omap3_vdd1_info = { - .prm_irqst_mod = OCP_MOD, - .prm_irqst_reg = OMAP3_PRM_IRQSTATUS_MPU_OFFSET, .vp_data = &omap3_vp1_data, .vfsm = &omap3_vdd1_vfsm_data, }; @@ -51,8 +49,6 @@ static const struct omap_vfsm_instance_data omap3_vdd2_vfsm_data = { }; static struct omap_vdd_info omap3_vdd2_info = { - .prm_irqst_mod = OCP_MOD, - .prm_irqst_reg = OMAP3_PRM_IRQSTATUS_MPU_OFFSET, .vp_data = &omap3_vp2_data, .vfsm = &omap3_vdd2_vfsm_data, }; diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c b/arch/arm/mach-omap2/voltagedomains44xx_data.c index a05d90ab6869..43e1d3817244 100644 --- a/arch/arm/mach-omap2/voltagedomains44xx_data.c +++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c @@ -37,8 +37,6 @@ static const struct omap_vfsm_instance_data omap4_vdd_mpu_vfsm_data = { }; static struct omap_vdd_info omap4_vdd_mpu_info = { - .prm_irqst_mod = OMAP4430_PRM_OCP_SOCKET_INST, - .prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET, .vp_data = &omap4_vp_mpu_data, .vfsm = &omap4_vdd_mpu_vfsm_data, }; @@ -48,8 +46,6 @@ static const struct omap_vfsm_instance_data omap4_vdd_iva_vfsm_data = { }; static struct omap_vdd_info omap4_vdd_iva_info = { - .prm_irqst_mod = OMAP4430_PRM_OCP_SOCKET_INST, - .prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_OFFSET, .vp_data = &omap4_vp_iva_data, .vfsm = &omap4_vdd_iva_vfsm_data, }; @@ -59,8 +55,6 @@ static const struct omap_vfsm_instance_data omap4_vdd_core_vfsm_data = { }; static struct omap_vdd_info omap4_vdd_core_info = { - .prm_irqst_mod = OMAP4430_PRM_OCP_SOCKET_INST, - .prm_irqst_reg = OMAP4_PRM_IRQSTATUS_MPU_OFFSET, .vp_data = &omap4_vp_core_data, .vfsm = &omap4_vdd_core_vfsm_data, }; diff --git a/arch/arm/mach-omap2/vp.c b/arch/arm/mach-omap2/vp.c index f3503de5d8fd..113c839f6e23 100644 --- a/arch/arm/mach-omap2/vp.c +++ b/arch/arm/mach-omap2/vp.c @@ -111,10 +111,8 @@ int omap_vp_forceupdate_scale(struct voltagedomain *voltdm, * is <3us */ while (timeout++ < VP_TRANXDONE_TIMEOUT) { - vdd->write_reg(vp->prm_irqst_data->tranxdone_status, - vdd->prm_irqst_mod, vdd->prm_irqst_reg); - if (!(vdd->read_reg(vdd->prm_irqst_mod, vdd->prm_irqst_reg) & - vp->prm_irqst_data->tranxdone_status)) + vp->vp_common->ops->clear_txdone(vp->id); + if (!vp->vp_common->ops->check_txdone(vp->id)) break; udelay(1); } @@ -146,9 +144,7 @@ int omap_vp_forceupdate_scale(struct voltagedomain *voltdm, * Depends on SMPSWAITTIMEMIN/MAX and voltage change */ timeout = 0; - omap_test_timeout((vdd->read_reg(vdd->prm_irqst_mod, - vdd->prm_irqst_reg) & - vp->prm_irqst_data->tranxdone_status), + omap_test_timeout(vp->vp_common->ops->check_txdone(vp->id), VP_TRANXDONE_TIMEOUT, timeout); if (timeout >= VP_TRANXDONE_TIMEOUT) pr_err("%s: vdd_%s TRANXDONE timeout exceeded." @@ -163,10 +159,8 @@ int omap_vp_forceupdate_scale(struct voltagedomain *voltdm, */ timeout = 0; while (timeout++ < VP_TRANXDONE_TIMEOUT) { - vdd->write_reg(vp->prm_irqst_data->tranxdone_status, - vdd->prm_irqst_mod, vdd->prm_irqst_reg); - if (!(vdd->read_reg(vdd->prm_irqst_mod, vdd->prm_irqst_reg) & - vp->prm_irqst_data->tranxdone_status)) + vp->vp_common->ops->clear_txdone(vp->id); + if (!vp->vp_common->ops->check_txdone(vp->id)) break; udelay(1); } -- cgit v1.2.3 From 4bb73adec43bbf63d39e1c2021de0aab0c60ea34 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 28 Mar 2011 10:25:12 -0700 Subject: OMAP2+: PRM: add register access functions for VC/VP On OMAP3+, the voltage controller (VC) and voltage processor (VP) are inside the PRM. Add some PRM helper functions for register access to these module registers. Thanks to Nishanth Menon for finding/fixing a sparse problem. Cc: Nishanth Menon Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/prm2xxx_3xxx.c | 17 ++++++++++++++++- arch/arm/mach-omap2/prm2xxx_3xxx.h | 8 ++++++++ arch/arm/mach-omap2/prm44xx.c | 22 ++++++++++++++++++++++ arch/arm/mach-omap2/prm44xx.h | 8 ++++++++ 4 files changed, 54 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c index 58c5c878b295..f02d87f68e54 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c @@ -169,7 +169,7 @@ struct omap3_vp { u32 tranxdone_status; }; -struct omap3_vp omap3_vp[] = { +static struct omap3_vp omap3_vp[] = { [OMAP3_VP_VDD_MPU_ID] = { .tranxdone_status = OMAP3430_VP1_TRANXDONE_ST_MASK, }, @@ -197,3 +197,18 @@ void omap3_prm_vp_clear_txdone(u8 vp_id) omap2_prm_write_mod_reg(vp->tranxdone_status, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET); } + +u32 omap3_prm_vcvp_read(u8 offset) +{ + return omap2_prm_read_mod_reg(OMAP3430_GR_MOD, offset); +} + +void omap3_prm_vcvp_write(u32 val, u8 offset) +{ + omap2_prm_write_mod_reg(val, OMAP3430_GR_MOD, offset); +} + +u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset) +{ + return omap2_prm_rmw_mod_reg_bits(mask, bits, OMAP3430_GR_MOD, offset); +} diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.h b/arch/arm/mach-omap2/prm2xxx_3xxx.h index 51125268632b..cef533df0861 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.h +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.h @@ -307,7 +307,15 @@ extern int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift); u32 omap3_prm_vp_check_txdone(u8 vp_id); void omap3_prm_vp_clear_txdone(u8 vp_id); +/* + * OMAP3 access functions for voltage controller (VC) and + * voltage proccessor (VP) in the PRM. + */ +extern u32 omap3_prm_vcvp_read(u8 offset); +extern void omap3_prm_vcvp_write(u32 val, u8 offset); +extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset); #endif /* CONFIG_ARCH_OMAP4 */ + #endif /* diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index 390e32c53b0e..495a31a7e8a7 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -24,6 +24,8 @@ #include "vp.h" #include "prm44xx.h" #include "prm-regbits-44xx.h" +#include "prcm44xx.h" +#include "prminst44xx.h" /* PRM low-level functions */ @@ -99,3 +101,23 @@ void omap4_prm_vp_clear_txdone(u8 vp_id) OMAP4430_PRM_OCP_SOCKET_INST, vp->irqstatus_mpu); }; + +u32 omap4_prm_vcvp_read(u8 offset) +{ + return omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION, + OMAP4430_PRM_DEVICE_INST, offset); +} + +void omap4_prm_vcvp_write(u32 val, u8 offset) +{ + omap4_prminst_write_inst_reg(val, OMAP4430_PRM_PARTITION, + OMAP4430_PRM_DEVICE_INST, offset); +} + +u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset) +{ + return omap4_prminst_rmw_inst_reg_bits(mask, bits, + OMAP4430_PRM_PARTITION, + OMAP4430_PRM_DEVICE_INST, + offset); +} diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h index b28c87dcbfa1..3d66ccd849d2 100644 --- a/arch/arm/mach-omap2/prm44xx.h +++ b/arch/arm/mach-omap2/prm44xx.h @@ -755,6 +755,14 @@ extern u32 omap4_prm_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx); u32 omap4_prm_vp_check_txdone(u8 vp_id); void omap4_prm_vp_clear_txdone(u8 vp_id); +/* + * OMAP4 access functions for voltage controller (VC) and + * voltage proccessor (VP) in the PRM. + */ +extern u32 omap4_prm_vcvp_read(u8 offset); +extern void omap4_prm_vcvp_write(u32 val, u8 offset); +extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset); + # endif #endif -- cgit v1.2.3 From 4bcc475ebd06a04e1531254c27c6cf508ef8ebf9 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 28 Mar 2011 10:40:15 -0700 Subject: OMAP3+: voltage: convert to PRM register access functions Convert VC/VP register access to use PRM VC/VP accessor functions. In the process, move the read/write function pointers from vdd_info into struct voltagedomain. No functional changes. Additional cleanup: - remove prm_mod field from VC/VP data structures, the PRM register access functions know which PRM module to use. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/vc.c | 69 +++++++++++---------------- arch/arm/mach-omap2/vc.h | 2 - arch/arm/mach-omap2/vc3xxx_data.c | 1 - arch/arm/mach-omap2/vc44xx_data.c | 1 - arch/arm/mach-omap2/voltage.c | 31 +----------- arch/arm/mach-omap2/voltage.h | 10 +++- arch/arm/mach-omap2/voltagedomains3xxx_data.c | 6 +++ arch/arm/mach-omap2/voltagedomains44xx_data.c | 9 ++++ arch/arm/mach-omap2/vp.c | 57 +++++++++++----------- arch/arm/mach-omap2/vp.h | 2 - arch/arm/mach-omap2/vp3xxx_data.c | 1 - arch/arm/mach-omap2/vp44xx_data.c | 1 - 12 files changed, 79 insertions(+), 111 deletions(-) diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index 1bdbe7c15612..f1c73cbe3cb4 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -46,7 +46,7 @@ int omap_vc_pre_scale(struct voltagedomain *voltdm, return -ENODATA; } - if (!vdd->read_reg || !vdd->write_reg) { + if (!voltdm->read || !voltdm->write) { pr_err("%s: No read/write API for accessing vdd_%s regs\n", __func__, voltdm->name); return -EINVAL; @@ -58,24 +58,22 @@ int omap_vc_pre_scale(struct voltagedomain *voltdm, volt_data = NULL; *target_vsel = vdd->pmic_info->uv_to_vsel(target_volt); - *current_vsel = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, vdd->vp_data->voltage); + *current_vsel = voltdm->read(vdd->vp_data->voltage); /* Setting the ON voltage to the new target voltage */ - vc_cmdval = vdd->read_reg(vc->common->prm_mod, vc->cmdval_reg); + vc_cmdval = voltdm->read(vc->cmdval_reg); vc_cmdval &= ~vc->common->cmd_on_mask; vc_cmdval |= (*target_vsel << vc->common->cmd_on_shift); - vdd->write_reg(vc_cmdval, vc->common->prm_mod, vc->cmdval_reg); + voltdm->write(vc_cmdval, vc->cmdval_reg); /* Setting vp errorgain based on the voltage */ if (volt_data) { - vp_errgain_val = vdd->read_reg(vdd->vp_data->vp_common->prm_mod, - vdd->vp_data->vpconfig); + vp_errgain_val = voltdm->read(vdd->vp_data->vpconfig); vdd->vp_rt_data.vpconfig_errorgain = volt_data->vp_errgain; vp_errgain_val &= ~vp_common->vpconfig_errorgain_mask; vp_errgain_val |= vdd->vp_rt_data.vpconfig_errorgain << vp_common->vpconfig_errorgain_shift; - vdd->write_reg(vp_errgain_val, vdd->vp_data->vp_common->prm_mod, - vdd->vp_data->vpconfig); + voltdm->write(vp_errgain_val, vdd->vp_data->vpconfig); } return 0; @@ -120,11 +118,10 @@ int omap_vc_bypass_scale(struct voltagedomain *voltdm, (vdd->pmic_info->i2c_slave_addr << vc->common->slaveaddr_shift); - vdd->write_reg(vc_bypass_value, vc->common->prm_mod, vc_bypass_val_reg); - vdd->write_reg(vc_bypass_value | vc_valid, vc->common->prm_mod, - vc_bypass_val_reg); + voltdm->write(vc_bypass_value, vc_bypass_val_reg); + voltdm->write(vc_bypass_value | vc_valid, vc_bypass_val_reg); - vc_bypass_value = vdd->read_reg(vc->common->prm_mod, vc_bypass_val_reg); + vc_bypass_value = voltdm->read(vc_bypass_val_reg); /* * Loop till the bypass command is acknowledged from the SMPS. * NOTE: This is legacy code. The loop count and retry count needs @@ -143,8 +140,7 @@ int omap_vc_bypass_scale(struct voltagedomain *voltdm, loop_cnt = 0; udelay(10); } - vc_bypass_value = vdd->read_reg(vc->common->prm_mod, - vc_bypass_val_reg); + vc_bypass_value = voltdm->read(vc_bypass_val_reg); } omap_vc_post_scale(voltdm, target_volt, target_vsel, current_vsel); @@ -153,18 +149,13 @@ int omap_vc_bypass_scale(struct voltagedomain *voltdm, static void __init omap3_vfsm_init(struct voltagedomain *voltdm) { - struct omap_vc_channel *vc = voltdm->vc; - struct omap_vdd_info *vdd = voltdm->vdd; - /* * Voltage Manager FSM parameters init * XXX This data should be passed in from the board file */ - vdd->write_reg(OMAP3_CLKSETUP, vc->common->prm_mod, OMAP3_PRM_CLKSETUP_OFFSET); - vdd->write_reg(OMAP3_VOLTOFFSET, vc->common->prm_mod, - OMAP3_PRM_VOLTOFFSET_OFFSET); - vdd->write_reg(OMAP3_VOLTSETUP2, vc->common->prm_mod, - OMAP3_PRM_VOLTSETUP2_OFFSET); + voltdm->write(OMAP3_CLKSETUP, OMAP3_PRM_CLKSETUP_OFFSET); + voltdm->write(OMAP3_VOLTOFFSET, OMAP3_PRM_VOLTOFFSET_OFFSET); + voltdm->write(OMAP3_VOLTSETUP2, OMAP3_PRM_VOLTSETUP2_OFFSET); } static void __init omap3_vc_init_channel(struct voltagedomain *voltdm) @@ -187,16 +178,16 @@ static void __init omap3_vc_init_channel(struct voltagedomain *voltdm) (onlp_vsel << vc->common->cmd_onlp_shift) | (ret_vsel << vc->common->cmd_ret_shift) | (off_vsel << vc->common->cmd_off_shift)); - vdd->write_reg(vc_val, vc->common->prm_mod, vc->cmdval_reg); + voltdm->write(vc_val, vc->cmdval_reg); /* * Generic VC parameters init * XXX This data should be abstracted out */ - vdd->write_reg(OMAP3430_CMD1_MASK | OMAP3430_RAV1_MASK, vc->common->prm_mod, - OMAP3_PRM_VC_CH_CONF_OFFSET); - vdd->write_reg(OMAP3430_MCODE_SHIFT | OMAP3430_HSEN_MASK, vc->common->prm_mod, - OMAP3_PRM_VC_I2C_CFG_OFFSET); + voltdm->write(OMAP3430_CMD1_MASK | OMAP3430_RAV1_MASK, + OMAP3_PRM_VC_CH_CONF_OFFSET); + voltdm->write(OMAP3430_MCODE_SHIFT | OMAP3430_HSEN_MASK, + OMAP3_PRM_VC_I2C_CFG_OFFSET); omap3_vfsm_init(voltdm); @@ -207,8 +198,6 @@ static void __init omap3_vc_init_channel(struct voltagedomain *voltdm) /* OMAP4 specific voltage init functions */ static void __init omap4_vc_init_channel(struct voltagedomain *voltdm) { - struct omap_vc_channel *vc = voltdm->vc; - struct omap_vdd_info *vdd = voltdm->vdd; static bool is_initialized; u32 vc_val; @@ -224,11 +213,11 @@ static void __init omap4_vc_init_channel(struct voltagedomain *voltdm) vc_val = (OMAP4430_RAV_VDD_MPU_L_MASK | OMAP4430_CMD_VDD_MPU_L_MASK | OMAP4430_RAV_VDD_IVA_L_MASK | OMAP4430_CMD_VDD_IVA_L_MASK | OMAP4430_RAV_VDD_CORE_L_MASK | OMAP4430_CMD_VDD_CORE_L_MASK); - vdd->write_reg(vc_val, vc->common->prm_mod, OMAP4_PRM_VC_CFG_CHANNEL_OFFSET); + voltdm->write(vc_val, OMAP4_PRM_VC_CFG_CHANNEL_OFFSET); /* XXX These are magic numbers and do not belong! */ vc_val = (0x60 << OMAP4430_SCLL_SHIFT | 0x26 << OMAP4430_SCLH_SHIFT); - vdd->write_reg(vc_val, vc->common->prm_mod, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET); + voltdm->write(vc_val, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET); is_initialized = true; } @@ -246,34 +235,30 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm) return; } - if (!vdd->read_reg || !vdd->write_reg) { + if (!voltdm->read || !voltdm->write) { pr_err("%s: No read/write API for accessing vdd_%s regs\n", __func__, voltdm->name); return; } /* Set up the SMPS_SA(i2c slave address in VC */ - vc_val = vdd->read_reg(vc->common->prm_mod, - vc->common->smps_sa_reg); + vc_val = voltdm->read(vc->common->smps_sa_reg); vc_val &= ~vc->smps_sa_mask; vc_val |= vdd->pmic_info->i2c_slave_addr << vc->smps_sa_shift; - vdd->write_reg(vc_val, vc->common->prm_mod, - vc->common->smps_sa_reg); + voltdm->write(vc_val, vc->common->smps_sa_reg); /* Setup the VOLRA(pmic reg addr) in VC */ - vc_val = vdd->read_reg(vc->common->prm_mod, - vc->common->smps_volra_reg); + vc_val = voltdm->read(vc->common->smps_volra_reg); vc_val &= ~vc->smps_volra_mask; vc_val |= vdd->pmic_info->volt_reg_addr << vc->smps_volra_shift; - vdd->write_reg(vc_val, vc->common->prm_mod, - vc->common->smps_volra_reg); + voltdm->write(vc_val, vc->common->smps_volra_reg); /* Configure the setup times */ - vc_val = vdd->read_reg(vc->common->prm_mod, vdd->vfsm->voltsetup_reg); + vc_val = voltdm->read(vdd->vfsm->voltsetup_reg); vc_val &= ~vdd->vfsm->voltsetup_mask; vc_val |= vdd->pmic_info->volt_setup_time << vdd->vfsm->voltsetup_shift; - vdd->write_reg(vc_val, vc->common->prm_mod, vdd->vfsm->voltsetup_reg); + voltdm->write(vc_val, vdd->vfsm->voltsetup_reg); if (cpu_is_omap34xx()) omap3_vc_init_channel(voltdm); diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h index 51d36a80b131..d0050f0ee6d5 100644 --- a/arch/arm/mach-omap2/vc.h +++ b/arch/arm/mach-omap2/vc.h @@ -25,7 +25,6 @@ struct voltagedomain; * struct omap_vc_common - per-VC register/bitfield data * @cmd_on_mask: ON bitmask in PRM_VC_CMD_VAL* register * @valid: VALID bitmask in PRM_VC_BYPASS_VAL register - * @prm_mod: PRM module id used for PRM register access * @smps_sa_reg: Offset of PRM_VC_SMPS_SA reg from PRM start * @smps_volra_reg: Offset of PRM_VC_SMPS_VOL_RA reg from PRM start * @bypass_val_reg: Offset of PRM_VC_BYPASS_VAL reg from PRM start @@ -43,7 +42,6 @@ struct voltagedomain; struct omap_vc_common { u32 cmd_on_mask; u32 valid; - s16 prm_mod; u8 smps_sa_reg; u8 smps_volra_reg; u8 bypass_val_reg; diff --git a/arch/arm/mach-omap2/vc3xxx_data.c b/arch/arm/mach-omap2/vc3xxx_data.c index 1a17ed459cc3..6b6720301345 100644 --- a/arch/arm/mach-omap2/vc3xxx_data.c +++ b/arch/arm/mach-omap2/vc3xxx_data.c @@ -30,7 +30,6 @@ * XXX This stuff presumably belongs in the vc3xxx.c or vc.c file. */ static struct omap_vc_common omap3_vc_common = { - .prm_mod = OMAP3430_GR_MOD, .smps_sa_reg = OMAP3_PRM_VC_SMPS_SA_OFFSET, .smps_volra_reg = OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET, .bypass_val_reg = OMAP3_PRM_VC_BYPASS_VAL_OFFSET, diff --git a/arch/arm/mach-omap2/vc44xx_data.c b/arch/arm/mach-omap2/vc44xx_data.c index 56f3f4a37879..e3125a370fa7 100644 --- a/arch/arm/mach-omap2/vc44xx_data.c +++ b/arch/arm/mach-omap2/vc44xx_data.c @@ -31,7 +31,6 @@ * XXX This stuff presumably belongs in the vc3xxx.c or vc.c file. */ static const struct omap_vc_common omap4_vc_common = { - .prm_mod = OMAP4430_PRM_DEVICE_INST, .smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET, .smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET, .bypass_val_reg = OMAP4_PRM_VC_VAL_BYPASS_OFFSET, diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index 9b9f01973d12..9f9f01465f6a 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -46,27 +46,6 @@ static LIST_HEAD(voltdm_list); #define VOLTAGE_DIR_SIZE 16 static struct dentry *voltage_dir; -static u32 omap3_voltage_read_reg(u16 mod, u8 offset) -{ - return omap2_prm_read_mod_reg(mod, offset); -} - -static void omap3_voltage_write_reg(u32 val, u16 mod, u8 offset) -{ - omap2_prm_write_mod_reg(val, mod, offset); -} - -static u32 omap4_voltage_read_reg(u16 mod, u8 offset) -{ - return omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION, - mod, offset); -} - -static void omap4_voltage_write_reg(u32 val, u16 mod, u8 offset) -{ - omap4_prminst_write_inst_reg(val, OMAP4430_PRM_PARTITION, mod, offset); -} - static int __init _config_common_vdd_data(struct voltagedomain *voltdm) { char *sys_ck_name; @@ -183,15 +162,7 @@ static int __init omap_vdd_data_configure(struct voltagedomain *voltdm) if (IS_ERR_VALUE(_config_common_vdd_data(voltdm))) goto ovdc_out; - if (cpu_is_omap34xx()) { - vdd->read_reg = omap3_voltage_read_reg; - vdd->write_reg = omap3_voltage_write_reg; - ret = 0; - } else if (cpu_is_omap44xx()) { - vdd->read_reg = omap4_voltage_read_reg; - vdd->write_reg = omap4_voltage_write_reg; - ret = 0; - } + ret = 0; ovdc_out: return ret; diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h index 04e06266dbd7..6a19cf39118b 100644 --- a/arch/arm/mach-omap2/voltage.h +++ b/arch/arm/mach-omap2/voltage.h @@ -59,6 +59,9 @@ struct omap_vfsm_instance_data { * @node: list_head linking all voltage domains * @pwrdm_list: list_head linking all powerdomains in this voltagedomain * @vc: pointer to VC channel associated with this voltagedomain + * @read: read a VC/VP register + * @write: write a VC/VP register + * @read: read-modify-write a VC/VP register * @vdd: to be removed */ struct voltagedomain { @@ -68,6 +71,11 @@ struct voltagedomain { struct list_head pwrdm_list; struct omap_vc_channel *vc; + /* VC/VP register access functions: SoC specific */ + u32 (*read) (u8 offset); + void (*write) (u32 val, u8 offset); + u32 (*rmw)(u32 mask, u32 bits, u8 offset); + struct omap_vdd_info *vdd; }; @@ -146,8 +154,6 @@ struct omap_vdd_info { u32 curr_volt; bool vp_enabled; - u32 (*read_reg) (u16 mod, u8 offset); - void (*write_reg) (u32 val, u16 mod, u8 offset); int (*volt_scale) (struct voltagedomain *voltdm, unsigned long target_volt); }; diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c index ad8f05b6a889..1d667490bc95 100644 --- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c +++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c @@ -56,6 +56,9 @@ static struct omap_vdd_info omap3_vdd2_info = { static struct voltagedomain omap3_voltdm_mpu = { .name = "mpu_iva", .scalable = true, + .read = omap3_prm_vcvp_read, + .write = omap3_prm_vcvp_write, + .rmw = omap3_prm_vcvp_rmw, .vc = &omap3_vc_mpu, .vdd = &omap3_vdd1_info, }; @@ -63,6 +66,9 @@ static struct voltagedomain omap3_voltdm_mpu = { static struct voltagedomain omap3_voltdm_core = { .name = "core", .scalable = true, + .read = omap3_prm_vcvp_read, + .write = omap3_prm_vcvp_write, + .rmw = omap3_prm_vcvp_rmw, .vc = &omap3_vc_core, .vdd = &omap3_vdd2_info, }; diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c b/arch/arm/mach-omap2/voltagedomains44xx_data.c index 43e1d3817244..e435795d61b7 100644 --- a/arch/arm/mach-omap2/voltagedomains44xx_data.c +++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c @@ -62,6 +62,9 @@ static struct omap_vdd_info omap4_vdd_core_info = { static struct voltagedomain omap4_voltdm_mpu = { .name = "mpu", .scalable = true, + .read = omap4_prm_vcvp_read, + .write = omap4_prm_vcvp_write, + .rmw = omap4_prm_vcvp_rmw, .vc = &omap4_vc_mpu, .vdd = &omap4_vdd_mpu_info, }; @@ -69,6 +72,9 @@ static struct voltagedomain omap4_voltdm_mpu = { static struct voltagedomain omap4_voltdm_iva = { .name = "iva", .scalable = true, + .read = omap4_prm_vcvp_read, + .write = omap4_prm_vcvp_write, + .rmw = omap4_prm_vcvp_rmw, .vc = &omap4_vc_iva, .vdd = &omap4_vdd_iva_info, }; @@ -76,6 +82,9 @@ static struct voltagedomain omap4_voltdm_iva = { static struct voltagedomain omap4_voltdm_core = { .name = "core", .scalable = true, + .read = omap4_prm_vcvp_read, + .write = omap4_prm_vcvp_write, + .rmw = omap4_prm_vcvp_rmw, .vc = &omap4_vc_core, .vdd = &omap4_vdd_core_info, }; diff --git a/arch/arm/mach-omap2/vp.c b/arch/arm/mach-omap2/vp.c index 113c839f6e23..88ac742a38cf 100644 --- a/arch/arm/mach-omap2/vp.c +++ b/arch/arm/mach-omap2/vp.c @@ -35,19 +35,19 @@ static void vp_latch_vsel(struct voltagedomain *voltdm) vsel = vdd->pmic_info->uv_to_vsel(uvdc); - vpconfig = vdd->read_reg(vp->vp_common->prm_mod, vp->vpconfig); + vpconfig = voltdm->read(vp->vpconfig); vpconfig &= ~(vp->vp_common->vpconfig_initvoltage_mask | vp->vp_common->vpconfig_initvdd); vpconfig |= vsel << vp->vp_common->vpconfig_initvoltage_shift; - vdd->write_reg(vpconfig, vp->vp_common->prm_mod, vp->vpconfig); + voltdm->write(vpconfig, vp->vpconfig); /* Trigger initVDD value copy to voltage processor */ - vdd->write_reg((vpconfig | vp->vp_common->vpconfig_initvdd), - vp->vp_common->prm_mod, vp->vpconfig); + voltdm->write((vpconfig | vp->vp_common->vpconfig_initvdd), + vp->vpconfig); /* Clear initVDD copy trigger bit */ - vdd->write_reg(vpconfig, vp->vp_common->prm_mod, vp->vpconfig); + voltdm->write(vpconfig, vp->vpconfig); } /* Generic voltage init functions */ @@ -57,7 +57,7 @@ void __init omap_vp_init(struct voltagedomain *voltdm) struct omap_vdd_info *vdd = voltdm->vdd; u32 vp_val; - if (!vdd->read_reg || !vdd->write_reg) { + if (!voltdm->read || !voltdm->write) { pr_err("%s: No read/write API for accessing vdd_%s regs\n", __func__, voltdm->name); return; @@ -67,19 +67,19 @@ void __init omap_vp_init(struct voltagedomain *voltdm) (vdd->vp_rt_data.vpconfig_errorgain << vp->vp_common->vpconfig_errorgain_shift) | vp->vp_common->vpconfig_timeouten; - vdd->write_reg(vp_val, vp->vp_common->prm_mod, vp->vpconfig); + voltdm->write(vp_val, vp->vpconfig); vp_val = ((vdd->vp_rt_data.vstepmin_smpswaittimemin << vp->vp_common->vstepmin_smpswaittimemin_shift) | (vdd->vp_rt_data.vstepmin_stepmin << vp->vp_common->vstepmin_stepmin_shift)); - vdd->write_reg(vp_val, vp->vp_common->prm_mod, vp->vstepmin); + voltdm->write(vp_val, vp->vstepmin); vp_val = ((vdd->vp_rt_data.vstepmax_smpswaittimemax << vp->vp_common->vstepmax_smpswaittimemax_shift) | (vdd->vp_rt_data.vstepmax_stepmax << vp->vp_common->vstepmax_stepmax_shift)); - vdd->write_reg(vp_val, vp->vp_common->prm_mod, vp->vstepmax); + voltdm->write(vp_val, vp->vstepmax); vp_val = ((vdd->vp_rt_data.vlimitto_vddmax << vp->vp_common->vlimitto_vddmax_shift) | @@ -87,7 +87,7 @@ void __init omap_vp_init(struct voltagedomain *voltdm) vp->vp_common->vlimitto_vddmin_shift) | (vdd->vp_rt_data.vlimitto_timeout << vp->vp_common->vlimitto_timeout_shift)); - vdd->write_reg(vp_val, vp->vp_common->prm_mod, vp->vlimitto); + voltdm->write(vp_val, vp->vlimitto); vp_debugfs_init(voltdm); } @@ -97,7 +97,6 @@ int omap_vp_forceupdate_scale(struct voltagedomain *voltdm, unsigned long target_volt) { struct omap_vp_instance_data *vp = voltdm->vdd->vp_data; - struct omap_vdd_info *vdd = voltdm->vdd; u32 vpconfig; u8 target_vsel, current_vsel; int ret, timeout = 0; @@ -123,21 +122,21 @@ int omap_vp_forceupdate_scale(struct voltagedomain *voltdm, } /* Configure for VP-Force Update */ - vpconfig = vdd->read_reg(vp->vp_common->prm_mod, vp->vpconfig); + vpconfig = voltdm->read(vp->vpconfig); vpconfig &= ~(vp->vp_common->vpconfig_initvdd | vp->vp_common->vpconfig_forceupdate | vp->vp_common->vpconfig_initvoltage_mask); vpconfig |= ((target_vsel << vp->vp_common->vpconfig_initvoltage_shift)); - vdd->write_reg(vpconfig, vp->vp_common->prm_mod, vp->vpconfig); + voltdm->write(vpconfig, vp->vpconfig); /* Trigger initVDD value copy to voltage processor */ vpconfig |= vp->vp_common->vpconfig_initvdd; - vdd->write_reg(vpconfig, vp->vp_common->prm_mod, vp->vpconfig); + voltdm->write(vpconfig, vp->vpconfig); /* Force update of voltage */ vpconfig |= vp->vp_common->vpconfig_forceupdate; - vdd->write_reg(vpconfig, vp->vp_common->prm_mod, vp->vpconfig); + voltdm->write(vpconfig, vp->vpconfig); /* * Wait for TransactionDone. Typical latency is <200us. @@ -170,13 +169,13 @@ int omap_vp_forceupdate_scale(struct voltagedomain *voltdm, "to clear the TRANXDONE status\n", __func__, voltdm->name); - vpconfig = vdd->read_reg(vp->vp_common->prm_mod, vp->vpconfig); + vpconfig = voltdm->read(vp->vpconfig); /* Clear initVDD copy trigger bit */ vpconfig &= ~vp->vp_common->vpconfig_initvdd; - vdd->write_reg(vpconfig, vp->vp_common->prm_mod, vp->vpconfig); + voltdm->write(vpconfig, vp->vpconfig); /* Clear force bit */ vpconfig &= ~vp->vp_common->vpconfig_forceupdate; - vdd->write_reg(vpconfig, vp->vp_common->prm_mod, vp->vpconfig); + voltdm->write(vpconfig, vp->vpconfig); return 0; } @@ -199,13 +198,13 @@ unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm) } vdd = voltdm->vdd; - if (!vdd->read_reg) { + if (!voltdm->read) { pr_err("%s: No read API for reading vdd_%s regs\n", __func__, voltdm->name); return 0; } - curr_vsel = vdd->read_reg(vp->vp_common->prm_mod, vp->voltage); + curr_vsel = voltdm->read(vp->voltage); if (!vdd->pmic_info || !vdd->pmic_info->vsel_to_uv) { pr_warning("%s: PMIC function to convert vsel to voltage" @@ -236,7 +235,7 @@ void omap_vp_enable(struct voltagedomain *voltdm) vdd = voltdm->vdd; vp = voltdm->vdd->vp_data; - if (!vdd->read_reg || !vdd->write_reg) { + if (!voltdm->read || !voltdm->write) { pr_err("%s: No read/write API for accessing vdd_%s regs\n", __func__, voltdm->name); return; @@ -249,9 +248,9 @@ void omap_vp_enable(struct voltagedomain *voltdm) vp_latch_vsel(voltdm); /* Enable VP */ - vpconfig = vdd->read_reg(vp->vp_common->prm_mod, vp->vpconfig); + vpconfig = voltdm->read(vp->vpconfig); vpconfig |= vp->vp_common->vpconfig_vpenable; - vdd->write_reg(vpconfig, vp->vp_common->prm_mod, vp->vpconfig); + voltdm->write(vpconfig, vp->vpconfig); vdd->vp_enabled = true; } @@ -276,7 +275,7 @@ void omap_vp_disable(struct voltagedomain *voltdm) vdd = voltdm->vdd; vp = voltdm->vdd->vp_data; - if (!vdd->read_reg || !vdd->write_reg) { + if (!voltdm->read || !voltdm->write) { pr_err("%s: No read/write API for accessing vdd_%s regs\n", __func__, voltdm->name); return; @@ -290,15 +289,15 @@ void omap_vp_disable(struct voltagedomain *voltdm) } /* Disable VP */ - vpconfig = vdd->read_reg(vp->vp_common->prm_mod, vp->vpconfig); + vpconfig = voltdm->read(vp->vpconfig); vpconfig &= ~vp->vp_common->vpconfig_vpenable; - vdd->write_reg(vpconfig, vp->vp_common->prm_mod, vp->vpconfig); + voltdm->write(vpconfig, vp->vpconfig); /* * Wait for VP idle Typical latency is <2us. Maximum latency is ~100us */ - omap_test_timeout((vdd->read_reg(vp->vp_common->prm_mod, vp->vstatus)), - VP_IDLE_TIMEOUT, timeout); + omap_test_timeout((voltdm->read(vp->vstatus)), + VP_IDLE_TIMEOUT, timeout); if (timeout >= VP_IDLE_TIMEOUT) pr_warning("%s: vdd_%s idle timedout\n", @@ -322,7 +321,7 @@ static int vp_volt_debug_get(void *data, u64 *val) return -EINVAL; } - vsel = vdd->read_reg(vp->vp_common->prm_mod, vp->voltage); + vsel = voltdm->read(vp->voltage); if (!vdd->pmic_info->vsel_to_uv) { pr_warning("PMIC function to convert vsel to voltage" diff --git a/arch/arm/mach-omap2/vp.h b/arch/arm/mach-omap2/vp.h index 1ccf7419a36c..382fef13dbc4 100644 --- a/arch/arm/mach-omap2/vp.h +++ b/arch/arm/mach-omap2/vp.h @@ -62,7 +62,6 @@ struct omap_vp_ops { * @vpconfig_vlimitto_vddmin_shift: VDDMIN field shift in PRM_VP*_VLIMITTO reg * @vpconfig_vlimitto_vddmax_shift: VDDMAX field shift in PRM_VP*_VLIMITTO reg * @vpconfig_vlimitto_timeout_shift: TIMEOUT field shift in PRM_VP*_VLIMITTO reg - * @prm_mod: PRM module id used for PRM register access * * XXX It it not necessary to have both a mask and a shift for the same * bitfield - remove one @@ -75,7 +74,6 @@ struct omap_vp_common_data { u32 vpconfig_initvdd; u32 vpconfig_forceupdate; u32 vpconfig_vpenable; - s16 prm_mod; u8 vpconfig_erroroffset_shift; u8 vpconfig_errorgain_shift; u8 vpconfig_initvoltage_shift; diff --git a/arch/arm/mach-omap2/vp3xxx_data.c b/arch/arm/mach-omap2/vp3xxx_data.c index 0372c1ab5672..b01d33325d52 100644 --- a/arch/arm/mach-omap2/vp3xxx_data.c +++ b/arch/arm/mach-omap2/vp3xxx_data.c @@ -37,7 +37,6 @@ static const struct omap_vp_ops omap3_vp_ops = { * XXX This stuff presumably belongs in the vp3xxx.c or vp.c file. */ static const struct omap_vp_common_data omap3_vp_common = { - .prm_mod = OMAP3430_GR_MOD, .vpconfig_erroroffset_shift = OMAP3430_ERROROFFSET_SHIFT, .vpconfig_errorgain_mask = OMAP3430_ERRORGAIN_MASK, .vpconfig_errorgain_shift = OMAP3430_ERRORGAIN_SHIFT, diff --git a/arch/arm/mach-omap2/vp44xx_data.c b/arch/arm/mach-omap2/vp44xx_data.c index 738ba04f5cf1..9704c7ba9e99 100644 --- a/arch/arm/mach-omap2/vp44xx_data.c +++ b/arch/arm/mach-omap2/vp44xx_data.c @@ -37,7 +37,6 @@ static const struct omap_vp_ops omap4_vp_ops = { * XXX This stuff presumably belongs in the vp44xx.c or vp.c file. */ static const struct omap_vp_common_data omap4_vp_common = { - .prm_mod = OMAP4430_PRM_DEVICE_INST, .vpconfig_erroroffset_shift = OMAP4430_ERROROFFSET_SHIFT, .vpconfig_errorgain_mask = OMAP4430_ERRORGAIN_MASK, .vpconfig_errorgain_shift = OMAP4430_ERRORGAIN_SHIFT, -- cgit v1.2.3 From ba112a4e86ba8f0f9546bd953374cde064b507ca Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 29 Mar 2011 14:02:36 -0700 Subject: OMAP3+: VC: cleanup i2c slave address configuration - Add an i2c_slave_address field to the omap_vc_channel - use VC/VP read/modify/write helper instead of open-coding - remove smps_sa_shift, use __ffs(mask) for shift value - I2C addresses 10-bit, change size to u16 Special thanks to Shweta Gulati for suggesting the use of __ffs(x) instead of ffs(x) - 1. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/vc.c | 12 +++++++----- arch/arm/mach-omap2/vc.h | 9 ++++++--- arch/arm/mach-omap2/vc3xxx_data.c | 2 -- arch/arm/mach-omap2/vc44xx_data.c | 3 --- arch/arm/mach-omap2/voltage.h | 3 ++- 5 files changed, 15 insertions(+), 14 deletions(-) diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index f1c73cbe3cb4..d5e792f20f16 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -241,11 +241,13 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm) return; } - /* Set up the SMPS_SA(i2c slave address in VC */ - vc_val = voltdm->read(vc->common->smps_sa_reg); - vc_val &= ~vc->smps_sa_mask; - vc_val |= vdd->pmic_info->i2c_slave_addr << vc->smps_sa_shift; - voltdm->write(vc_val, vc->common->smps_sa_reg); + /* get PMIC/board specific settings */ + vc->i2c_slave_addr = vdd->pmic_info->i2c_slave_addr; + + /* Configure the i2c slave address for this VC */ + voltdm->rmw(vc->smps_sa_mask, + vc->i2c_slave_addr << __ffs(vc->smps_sa_mask), + vc->common->smps_sa_reg); /* Setup the VOLRA(pmic reg addr) in VC */ vc_val = voltdm->read(vc->common->smps_volra_reg); diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h index d0050f0ee6d5..69ca900aff0b 100644 --- a/arch/arm/mach-omap2/vc.h +++ b/arch/arm/mach-omap2/vc.h @@ -56,21 +56,24 @@ struct omap_vc_common { /** * struct omap_vc_channel - VC per-instance data + * @i2c_slave_addr: I2C slave address of PMIC for this VC channel * @common: pointer to VC common data for this platform - * @smps_sa_mask: SA* bitmask in the PRM_VC_SMPS_SA register + * @smps_sa_mask: i2c slave address bitmask in the PRM_VC_SMPS_SA register * @smps_volra_mask: VOLRA* bitmask in the PRM_VC_VOL_RA register - * @smps_sa_shift: SA* field shift in the PRM_VC_SMPS_SA register * @smps_volra_shift: VOLRA* field shift in the PRM_VC_VOL_RA register * * XXX It is not necessary to have both a *_mask and a *_shift - * remove one */ struct omap_vc_channel { + /* channel state */ + u16 i2c_slave_addr; + + /* register access data */ const struct omap_vc_common *common; u32 smps_sa_mask; u32 smps_volra_mask; u8 cmdval_reg; - u8 smps_sa_shift; u8 smps_volra_shift; }; diff --git a/arch/arm/mach-omap2/vc3xxx_data.c b/arch/arm/mach-omap2/vc3xxx_data.c index 6b6720301345..86be50c263ac 100644 --- a/arch/arm/mach-omap2/vc3xxx_data.c +++ b/arch/arm/mach-omap2/vc3xxx_data.c @@ -47,7 +47,6 @@ static struct omap_vc_common omap3_vc_common = { struct omap_vc_channel omap3_vc_mpu = { .common = &omap3_vc_common, .cmdval_reg = OMAP3_PRM_VC_CMD_VAL_0_OFFSET, - .smps_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA0_SHIFT, .smps_sa_mask = OMAP3430_PRM_VC_SMPS_SA_SA0_MASK, .smps_volra_shift = OMAP3430_VOLRA0_SHIFT, .smps_volra_mask = OMAP3430_VOLRA0_MASK, @@ -56,7 +55,6 @@ struct omap_vc_channel omap3_vc_mpu = { struct omap_vc_channel omap3_vc_core = { .common = &omap3_vc_common, .cmdval_reg = OMAP3_PRM_VC_CMD_VAL_1_OFFSET, - .smps_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA1_SHIFT, .smps_sa_mask = OMAP3430_PRM_VC_SMPS_SA_SA1_MASK, .smps_volra_shift = OMAP3430_VOLRA1_SHIFT, .smps_volra_mask = OMAP3430_VOLRA1_MASK, diff --git a/arch/arm/mach-omap2/vc44xx_data.c b/arch/arm/mach-omap2/vc44xx_data.c index e3125a370fa7..af922b440e96 100644 --- a/arch/arm/mach-omap2/vc44xx_data.c +++ b/arch/arm/mach-omap2/vc44xx_data.c @@ -49,7 +49,6 @@ static const struct omap_vc_common omap4_vc_common = { struct omap_vc_channel omap4_vc_mpu = { .common = &omap4_vc_common, .cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_MPU_L_OFFSET, - .smps_sa_shift = OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_SHIFT, .smps_sa_mask = OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_MASK, .smps_volra_shift = OMAP4430_VOLRA_VDD_MPU_L_SHIFT, .smps_volra_mask = OMAP4430_VOLRA_VDD_MPU_L_MASK, @@ -58,7 +57,6 @@ struct omap_vc_channel omap4_vc_mpu = { struct omap_vc_channel omap4_vc_iva = { .common = &omap4_vc_common, .cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_IVA_L_OFFSET, - .smps_sa_shift = OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_SHIFT, .smps_sa_mask = OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_MASK, .smps_volra_shift = OMAP4430_VOLRA_VDD_IVA_L_SHIFT, .smps_volra_mask = OMAP4430_VOLRA_VDD_IVA_L_MASK, @@ -67,7 +65,6 @@ struct omap_vc_channel omap4_vc_iva = { struct omap_vc_channel omap4_vc_core = { .common = &omap4_vc_common, .cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_CORE_L_OFFSET, - .smps_sa_shift = OMAP4430_SA_VDD_CORE_L_0_6_SHIFT, .smps_sa_mask = OMAP4430_SA_VDD_CORE_L_0_6_MASK, .smps_volra_shift = OMAP4430_VOLRA_VDD_CORE_L_SHIFT, .smps_volra_mask = OMAP4430_VOLRA_VDD_CORE_L_MASK, diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h index 6a19cf39118b..590384978279 100644 --- a/arch/arm/mach-omap2/voltage.h +++ b/arch/arm/mach-omap2/voltage.h @@ -102,6 +102,7 @@ struct omap_volt_data { * struct omap_volt_pmic_info - PMIC specific data required by voltage driver. * @slew_rate: PMIC slew rate (in uv/us) * @step_size: PMIC voltage step size (in uv) + * @i2c_slave_addr: I2C slave address of PMIC * @vsel_to_uv: PMIC API to convert vsel value to actual voltage in uV. * @uv_to_vsel: PMIC API to convert voltage in uV to vsel value. * @volt_reg_addr: voltage configuration register address @@ -115,13 +116,13 @@ struct omap_volt_pmic_info { u32 ret_volt; u32 off_volt; u16 volt_setup_time; + u16 i2c_slave_addr; u8 vp_erroroffset; u8 vp_vstepmin; u8 vp_vstepmax; u8 vp_vddmin; u8 vp_vddmax; u8 vp_timeout_us; - u8 i2c_slave_addr; u8 volt_reg_addr; u8 cmd_reg_addr; unsigned long (*vsel_to_uv) (const u8 vsel); -- cgit v1.2.3 From e4e021c5491537783f5f65a6defa92e6098a3658 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Thu, 9 Jun 2011 11:01:55 -0700 Subject: OMAP3+: VC: cleanup PMIC register address configuration - support both voltage register address and command register address for each VC channel - add fields for voltage register address (volra) and command register address (cmdra) to struct omap_vc_channel - use VC/VP register access read/modify/write helper - remove volra_shift field (use __ffs(mask) for shift value) - I2C addresses 10-bit, change size to u16 Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/vc.c | 17 ++++++++++++----- arch/arm/mach-omap2/vc.h | 14 +++++++++----- arch/arm/mach-omap2/vc3xxx_data.c | 5 +++-- arch/arm/mach-omap2/vc44xx_data.c | 7 ++++--- arch/arm/mach-omap2/voltage.h | 8 ++++---- 5 files changed, 32 insertions(+), 19 deletions(-) diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index d5e792f20f16..22db6e6764d7 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -243,17 +243,24 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm) /* get PMIC/board specific settings */ vc->i2c_slave_addr = vdd->pmic_info->i2c_slave_addr; + vc->volt_reg_addr = vdd->pmic_info->volt_reg_addr; + vc->cmd_reg_addr = vdd->pmic_info->cmd_reg_addr; /* Configure the i2c slave address for this VC */ voltdm->rmw(vc->smps_sa_mask, vc->i2c_slave_addr << __ffs(vc->smps_sa_mask), vc->common->smps_sa_reg); - /* Setup the VOLRA(pmic reg addr) in VC */ - vc_val = voltdm->read(vc->common->smps_volra_reg); - vc_val &= ~vc->smps_volra_mask; - vc_val |= vdd->pmic_info->volt_reg_addr << vc->smps_volra_shift; - voltdm->write(vc_val, vc->common->smps_volra_reg); + /* + * Configure the PMIC register addresses. + */ + voltdm->rmw(vc->smps_volra_mask, + vc->volt_reg_addr << __ffs(vc->smps_volra_mask), + vc->common->smps_volra_reg); + if (vc->cmd_reg_addr) + voltdm->rmw(vc->smps_cmdra_mask, + vc->cmd_reg_addr << __ffs(vc->smps_cmdra_mask), + vc->common->smps_cmdra_reg); /* Configure the setup times */ vc_val = voltdm->read(vdd->vfsm->voltsetup_reg); diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h index 69ca900aff0b..43a0c5c2b07a 100644 --- a/arch/arm/mach-omap2/vc.h +++ b/arch/arm/mach-omap2/vc.h @@ -27,6 +27,7 @@ struct voltagedomain; * @valid: VALID bitmask in PRM_VC_BYPASS_VAL register * @smps_sa_reg: Offset of PRM_VC_SMPS_SA reg from PRM start * @smps_volra_reg: Offset of PRM_VC_SMPS_VOL_RA reg from PRM start + * @smps_cmdra_reg: Offset of PRM_VC_SMPS_CMD_RA reg from PRM start * @bypass_val_reg: Offset of PRM_VC_BYPASS_VAL reg from PRM start * @data_shift: DATA field shift in PRM_VC_BYPASS_VAL register * @slaveaddr_shift: SLAVEADDR field shift in PRM_VC_BYPASS_VAL register @@ -44,6 +45,7 @@ struct omap_vc_common { u32 valid; u8 smps_sa_reg; u8 smps_volra_reg; + u8 smps_cmdra_reg; u8 bypass_val_reg; u8 data_shift; u8 slaveaddr_shift; @@ -57,24 +59,26 @@ struct omap_vc_common { /** * struct omap_vc_channel - VC per-instance data * @i2c_slave_addr: I2C slave address of PMIC for this VC channel + * @volt_reg_addr: voltage configuration register address + * @cmd_reg_addr: command configuration register address * @common: pointer to VC common data for this platform * @smps_sa_mask: i2c slave address bitmask in the PRM_VC_SMPS_SA register * @smps_volra_mask: VOLRA* bitmask in the PRM_VC_VOL_RA register - * @smps_volra_shift: VOLRA* field shift in the PRM_VC_VOL_RA register - * - * XXX It is not necessary to have both a *_mask and a *_shift - - * remove one + * @smps_cmdra_mask: CMDRA* bitmask in the PRM_VC_CMD_RA register + * @cmdval_reg: register for on/ret/off voltage level values for this channel */ struct omap_vc_channel { /* channel state */ u16 i2c_slave_addr; + u16 volt_reg_addr; + u16 cmd_reg_addr; /* register access data */ const struct omap_vc_common *common; u32 smps_sa_mask; u32 smps_volra_mask; + u32 smps_cmdra_mask; u8 cmdval_reg; - u8 smps_volra_shift; }; extern struct omap_vc_channel omap3_vc_mpu; diff --git a/arch/arm/mach-omap2/vc3xxx_data.c b/arch/arm/mach-omap2/vc3xxx_data.c index 86be50c263ac..df8bd5ead7e4 100644 --- a/arch/arm/mach-omap2/vc3xxx_data.c +++ b/arch/arm/mach-omap2/vc3xxx_data.c @@ -32,6 +32,7 @@ static struct omap_vc_common omap3_vc_common = { .smps_sa_reg = OMAP3_PRM_VC_SMPS_SA_OFFSET, .smps_volra_reg = OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET, + .smps_cmdra_reg = OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET, .bypass_val_reg = OMAP3_PRM_VC_BYPASS_VAL_OFFSET, .data_shift = OMAP3430_DATA_SHIFT, .slaveaddr_shift = OMAP3430_SLAVEADDR_SHIFT, @@ -48,14 +49,14 @@ struct omap_vc_channel omap3_vc_mpu = { .common = &omap3_vc_common, .cmdval_reg = OMAP3_PRM_VC_CMD_VAL_0_OFFSET, .smps_sa_mask = OMAP3430_PRM_VC_SMPS_SA_SA0_MASK, - .smps_volra_shift = OMAP3430_VOLRA0_SHIFT, .smps_volra_mask = OMAP3430_VOLRA0_MASK, + .smps_cmdra_mask = OMAP3430_CMDRA0_MASK, }; struct omap_vc_channel omap3_vc_core = { .common = &omap3_vc_common, .cmdval_reg = OMAP3_PRM_VC_CMD_VAL_1_OFFSET, .smps_sa_mask = OMAP3430_PRM_VC_SMPS_SA_SA1_MASK, - .smps_volra_shift = OMAP3430_VOLRA1_SHIFT, .smps_volra_mask = OMAP3430_VOLRA1_MASK, + .smps_cmdra_mask = OMAP3430_CMDRA1_MASK, }; diff --git a/arch/arm/mach-omap2/vc44xx_data.c b/arch/arm/mach-omap2/vc44xx_data.c index af922b440e96..5d104ff662b3 100644 --- a/arch/arm/mach-omap2/vc44xx_data.c +++ b/arch/arm/mach-omap2/vc44xx_data.c @@ -33,6 +33,7 @@ static const struct omap_vc_common omap4_vc_common = { .smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET, .smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET, + .smps_cmdra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_CMD_OFFSET, .bypass_val_reg = OMAP4_PRM_VC_VAL_BYPASS_OFFSET, .data_shift = OMAP4430_DATA_SHIFT, .slaveaddr_shift = OMAP4430_SLAVEADDR_SHIFT, @@ -50,23 +51,23 @@ struct omap_vc_channel omap4_vc_mpu = { .common = &omap4_vc_common, .cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_MPU_L_OFFSET, .smps_sa_mask = OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_MASK, - .smps_volra_shift = OMAP4430_VOLRA_VDD_MPU_L_SHIFT, .smps_volra_mask = OMAP4430_VOLRA_VDD_MPU_L_MASK, + .smps_cmdra_mask = OMAP4430_CMDRA_VDD_MPU_L_MASK, }; struct omap_vc_channel omap4_vc_iva = { .common = &omap4_vc_common, .cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_IVA_L_OFFSET, .smps_sa_mask = OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_MASK, - .smps_volra_shift = OMAP4430_VOLRA_VDD_IVA_L_SHIFT, .smps_volra_mask = OMAP4430_VOLRA_VDD_IVA_L_MASK, + .smps_cmdra_mask = OMAP4430_CMDRA_VDD_IVA_L_MASK, }; struct omap_vc_channel omap4_vc_core = { .common = &omap4_vc_common, .cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_CORE_L_OFFSET, .smps_sa_mask = OMAP4430_SA_VDD_CORE_L_0_6_MASK, - .smps_volra_shift = OMAP4430_VOLRA_VDD_CORE_L_SHIFT, .smps_volra_mask = OMAP4430_VOLRA_VDD_CORE_L_MASK, + .smps_cmdra_mask = OMAP4430_CMDRA_VDD_CORE_L_MASK, }; diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h index 590384978279..3f49807a36e8 100644 --- a/arch/arm/mach-omap2/voltage.h +++ b/arch/arm/mach-omap2/voltage.h @@ -103,10 +103,10 @@ struct omap_volt_data { * @slew_rate: PMIC slew rate (in uv/us) * @step_size: PMIC voltage step size (in uv) * @i2c_slave_addr: I2C slave address of PMIC - * @vsel_to_uv: PMIC API to convert vsel value to actual voltage in uV. - * @uv_to_vsel: PMIC API to convert voltage in uV to vsel value. * @volt_reg_addr: voltage configuration register address * @cmd_reg_addr: command (on, on-LP, ret, off) configuration register address + * @vsel_to_uv: PMIC API to convert vsel value to actual voltage in uV. + * @uv_to_vsel: PMIC API to convert voltage in uV to vsel value. */ struct omap_volt_pmic_info { int slew_rate; @@ -117,14 +117,14 @@ struct omap_volt_pmic_info { u32 off_volt; u16 volt_setup_time; u16 i2c_slave_addr; + u16 volt_reg_addr; + u16 cmd_reg_addr; u8 vp_erroroffset; u8 vp_vstepmin; u8 vp_vstepmax; u8 vp_vddmin; u8 vp_vddmax; u8 vp_timeout_us; - u8 volt_reg_addr; - u8 cmd_reg_addr; unsigned long (*vsel_to_uv) (const u8 vsel); u8 (*uv_to_vsel) (unsigned long uV); }; -- cgit v1.2.3 From 78614e0f8f32dca52beebaadfb53c2a3acf1604a Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 29 Mar 2011 14:24:47 -0700 Subject: OMAP3+: VC bypass: use fields from VC struct instead of PMIC info The PMIC configurable variables should be isolated to VC initialization. The rest of the VC functions (like VC bypass) should use the i2c slave address and voltage register address fields from struct omap_vc_channel. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/vc.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index 22db6e6764d7..8f0105a7bb4b 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -100,7 +100,6 @@ int omap_vc_bypass_scale(struct voltagedomain *voltdm, unsigned long target_volt) { struct omap_vc_channel *vc = voltdm->vc; - struct omap_vdd_info *vdd = voltdm->vdd; u32 loop_cnt = 0, retries_cnt = 0; u32 vc_valid, vc_bypass_val_reg, vc_bypass_value; u8 target_vsel, current_vsel; @@ -113,10 +112,8 @@ int omap_vc_bypass_scale(struct voltagedomain *voltdm, vc_valid = vc->common->valid; vc_bypass_val_reg = vc->common->bypass_val_reg; vc_bypass_value = (target_vsel << vc->common->data_shift) | - (vdd->pmic_info->volt_reg_addr << - vc->common->regaddr_shift) | - (vdd->pmic_info->i2c_slave_addr << - vc->common->slaveaddr_shift); + (vc->volt_reg_addr << vc->common->regaddr_shift) | + (vc->i2c_slave_addr << vc->common->slaveaddr_shift); voltdm->write(vc_bypass_value, vc_bypass_val_reg); voltdm->write(vc_bypass_value | vc_valid, vc_bypass_val_reg); -- cgit v1.2.3 From 5892bb1fc6430d086f5c2a4216f9ed00070e31ad Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 29 Mar 2011 14:36:04 -0700 Subject: OMAP3+: VC: cleanup voltage setup time configuration - add setup_time field to struct omap_vc_channel (init'd from PMIC data) - use VC/VP register access helper for read/modify/write - move VFSM structure from omap_vdd_info into struct voltagedomain - remove redunant _data suffix from VFSM structures and variables - remove voltsetup_shift, use ffs() on the mask value to find the shift Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/vc.c | 10 ++++------ arch/arm/mach-omap2/vc.h | 2 ++ arch/arm/mach-omap2/voltage.h | 11 +++-------- arch/arm/mach-omap2/voltagedomains3xxx_data.c | 10 ++++------ arch/arm/mach-omap2/voltagedomains44xx_data.c | 12 ++++++------ 5 files changed, 19 insertions(+), 26 deletions(-) diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index 8f0105a7bb4b..f78e62abe720 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -223,7 +223,6 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm) { struct omap_vc_channel *vc = voltdm->vc; struct omap_vdd_info *vdd = voltdm->vdd; - u32 vc_val; if (!vdd->pmic_info || !vdd->pmic_info->uv_to_vsel) { pr_err("%s: PMIC info requried to configure vc for" @@ -242,6 +241,7 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm) vc->i2c_slave_addr = vdd->pmic_info->i2c_slave_addr; vc->volt_reg_addr = vdd->pmic_info->volt_reg_addr; vc->cmd_reg_addr = vdd->pmic_info->cmd_reg_addr; + vc->setup_time = vdd->pmic_info->volt_setup_time; /* Configure the i2c slave address for this VC */ voltdm->rmw(vc->smps_sa_mask, @@ -260,11 +260,9 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm) vc->common->smps_cmdra_reg); /* Configure the setup times */ - vc_val = voltdm->read(vdd->vfsm->voltsetup_reg); - vc_val &= ~vdd->vfsm->voltsetup_mask; - vc_val |= vdd->pmic_info->volt_setup_time << - vdd->vfsm->voltsetup_shift; - voltdm->write(vc_val, vdd->vfsm->voltsetup_reg); + voltdm->rmw(voltdm->vfsm->voltsetup_mask, + vc->setup_time << __ffs(voltdm->vfsm->voltsetup_mask), + voltdm->vfsm->voltsetup_reg); if (cpu_is_omap34xx()) omap3_vc_init_channel(voltdm); diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h index 43a0c5c2b07a..6e8806b59823 100644 --- a/arch/arm/mach-omap2/vc.h +++ b/arch/arm/mach-omap2/vc.h @@ -61,6 +61,7 @@ struct omap_vc_common { * @i2c_slave_addr: I2C slave address of PMIC for this VC channel * @volt_reg_addr: voltage configuration register address * @cmd_reg_addr: command configuration register address + * @setup_time: setup time (in sys_clk cycles) of regulator for this channel * @common: pointer to VC common data for this platform * @smps_sa_mask: i2c slave address bitmask in the PRM_VC_SMPS_SA register * @smps_volra_mask: VOLRA* bitmask in the PRM_VC_VOL_RA register @@ -72,6 +73,7 @@ struct omap_vc_channel { u16 i2c_slave_addr; u16 volt_reg_addr; u16 cmd_reg_addr; + u16 setup_time; /* register access data */ const struct omap_vc_common *common; diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h index 3f49807a36e8..99df2d13e42e 100644 --- a/arch/arm/mach-omap2/voltage.h +++ b/arch/arm/mach-omap2/voltage.h @@ -36,20 +36,16 @@ struct powerdomain; struct omap_vdd_info; /** - * struct omap_vfsm_instance_data - per-voltage manager FSM register/bitfield + * struct omap_vfsm_instance - per-voltage manager FSM register/bitfield * data * @voltsetup_mask: SETUP_TIME* bitmask in the PRM_VOLTSETUP* register * @voltsetup_reg: register offset of PRM_VOLTSETUP from PRM base - * @voltsetup_shift: SETUP_TIME* field shift in the PRM_VOLTSETUP* register * * XXX What about VOLTOFFSET/VOLTCTRL? - * XXX It is not necessary to have both a _mask and a _shift for the same - * bitfield - remove one! */ -struct omap_vfsm_instance_data { +struct omap_vfsm_instance { u32 voltsetup_mask; u8 voltsetup_reg; - u8 voltsetup_shift; }; /** @@ -70,6 +66,7 @@ struct voltagedomain { struct list_head node; struct list_head pwrdm_list; struct omap_vc_channel *vc; + const struct omap_vfsm_instance *vfsm; /* VC/VP register access functions: SoC specific */ u32 (*read) (u8 offset); @@ -139,7 +136,6 @@ struct omap_volt_pmic_info { * @vp_data : the register values, shifts, masks for various * vp registers * @vp_rt_data : VP data derived at runtime, not predefined - * @vfsm : voltage manager FSM data * @debug_dir : debug directory for this voltage domain. * @curr_volt : current voltage for this vdd. * @vp_enabled : flag to keep track of whether vp is enabled or not @@ -150,7 +146,6 @@ struct omap_vdd_info { struct omap_volt_pmic_info *pmic_info; struct omap_vp_instance_data *vp_data; struct omap_vp_runtime_data vp_rt_data; - const struct omap_vfsm_instance_data *vfsm; struct dentry *debug_dir; u32 curr_volt; bool vp_enabled; diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c index 1d667490bc95..ce5a7971addf 100644 --- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c +++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c @@ -31,26 +31,22 @@ * VDD data */ -static const struct omap_vfsm_instance_data omap3_vdd1_vfsm_data = { +static const struct omap_vfsm_instance omap3_vdd1_vfsm = { .voltsetup_reg = OMAP3_PRM_VOLTSETUP1_OFFSET, - .voltsetup_shift = OMAP3430_SETUP_TIME1_SHIFT, .voltsetup_mask = OMAP3430_SETUP_TIME1_MASK, }; static struct omap_vdd_info omap3_vdd1_info = { .vp_data = &omap3_vp1_data, - .vfsm = &omap3_vdd1_vfsm_data, }; -static const struct omap_vfsm_instance_data omap3_vdd2_vfsm_data = { +static const struct omap_vfsm_instance omap3_vdd2_vfsm = { .voltsetup_reg = OMAP3_PRM_VOLTSETUP1_OFFSET, - .voltsetup_shift = OMAP3430_SETUP_TIME2_SHIFT, .voltsetup_mask = OMAP3430_SETUP_TIME2_MASK, }; static struct omap_vdd_info omap3_vdd2_info = { .vp_data = &omap3_vp2_data, - .vfsm = &omap3_vdd2_vfsm_data, }; static struct voltagedomain omap3_voltdm_mpu = { @@ -60,6 +56,7 @@ static struct voltagedomain omap3_voltdm_mpu = { .write = omap3_prm_vcvp_write, .rmw = omap3_prm_vcvp_rmw, .vc = &omap3_vc_mpu, + .vfsm = &omap3_vdd1_vfsm, .vdd = &omap3_vdd1_info, }; @@ -70,6 +67,7 @@ static struct voltagedomain omap3_voltdm_core = { .write = omap3_prm_vcvp_write, .rmw = omap3_prm_vcvp_rmw, .vc = &omap3_vc_core, + .vfsm = &omap3_vdd2_vfsm, .vdd = &omap3_vdd2_info, }; diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c b/arch/arm/mach-omap2/voltagedomains44xx_data.c index e435795d61b7..dd4bd222739a 100644 --- a/arch/arm/mach-omap2/voltagedomains44xx_data.c +++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c @@ -32,31 +32,28 @@ #include "vc.h" #include "vp.h" -static const struct omap_vfsm_instance_data omap4_vdd_mpu_vfsm_data = { +static const struct omap_vfsm_instance omap4_vdd_mpu_vfsm = { .voltsetup_reg = OMAP4_PRM_VOLTSETUP_MPU_RET_SLEEP_OFFSET, }; static struct omap_vdd_info omap4_vdd_mpu_info = { .vp_data = &omap4_vp_mpu_data, - .vfsm = &omap4_vdd_mpu_vfsm_data, }; -static const struct omap_vfsm_instance_data omap4_vdd_iva_vfsm_data = { +static const struct omap_vfsm_instance omap4_vdd_iva_vfsm = { .voltsetup_reg = OMAP4_PRM_VOLTSETUP_IVA_RET_SLEEP_OFFSET, }; static struct omap_vdd_info omap4_vdd_iva_info = { .vp_data = &omap4_vp_iva_data, - .vfsm = &omap4_vdd_iva_vfsm_data, }; -static const struct omap_vfsm_instance_data omap4_vdd_core_vfsm_data = { +static const struct omap_vfsm_instance omap4_vdd_core_vfsm = { .voltsetup_reg = OMAP4_PRM_VOLTSETUP_CORE_RET_SLEEP_OFFSET, }; static struct omap_vdd_info omap4_vdd_core_info = { .vp_data = &omap4_vp_core_data, - .vfsm = &omap4_vdd_core_vfsm_data, }; static struct voltagedomain omap4_voltdm_mpu = { @@ -66,6 +63,7 @@ static struct voltagedomain omap4_voltdm_mpu = { .write = omap4_prm_vcvp_write, .rmw = omap4_prm_vcvp_rmw, .vc = &omap4_vc_mpu, + .vfsm = &omap4_vdd_mpu_vfsm, .vdd = &omap4_vdd_mpu_info, }; @@ -76,6 +74,7 @@ static struct voltagedomain omap4_voltdm_iva = { .write = omap4_prm_vcvp_write, .rmw = omap4_prm_vcvp_rmw, .vc = &omap4_vc_iva, + .vfsm = &omap4_vdd_iva_vfsm, .vdd = &omap4_vdd_iva_info, }; @@ -86,6 +85,7 @@ static struct voltagedomain omap4_voltdm_core = { .write = omap4_prm_vcvp_write, .rmw = omap4_prm_vcvp_rmw, .vc = &omap4_vc_core, + .vfsm = &omap4_vdd_core_vfsm, .vdd = &omap4_vdd_core_info, }; -- cgit v1.2.3 From 08d1c9a3e2dc7a285db7c689c42963d0f5271c1f Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 29 Mar 2011 15:14:38 -0700 Subject: OMAP3+: VC: move on/onlp/ret/off command configuration into common init Configuring the on/onlp/ret/off command values is common to OMAP3 & 4. Move from OMAP3-only init into common VC init. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/vc.c | 30 +++++++++++++----------------- 1 file changed, 13 insertions(+), 17 deletions(-) diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index f78e62abe720..72c9cb64a42b 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -157,26 +157,11 @@ static void __init omap3_vfsm_init(struct voltagedomain *voltdm) static void __init omap3_vc_init_channel(struct voltagedomain *voltdm) { - struct omap_vc_channel *vc = voltdm->vc; - struct omap_vdd_info *vdd = voltdm->vdd; static bool is_initialized; - u8 on_vsel, onlp_vsel, ret_vsel, off_vsel; - u32 vc_val; if (is_initialized) return; - /* Set up the on, inactive, retention and off voltage */ - on_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->on_volt); - onlp_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->onlp_volt); - ret_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->ret_volt); - off_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->off_volt); - vc_val = ((on_vsel << vc->common->cmd_on_shift) | - (onlp_vsel << vc->common->cmd_onlp_shift) | - (ret_vsel << vc->common->cmd_ret_shift) | - (off_vsel << vc->common->cmd_off_shift)); - voltdm->write(vc_val, vc->cmdval_reg); - /* * Generic VC parameters init * XXX This data should be abstracted out @@ -201,8 +186,6 @@ static void __init omap4_vc_init_channel(struct voltagedomain *voltdm) if (is_initialized) return; - /* TODO: Configure setup times and CMD_VAL values*/ - /* * Generic VC parameters init * XXX This data should be abstracted out @@ -223,6 +206,8 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm) { struct omap_vc_channel *vc = voltdm->vc; struct omap_vdd_info *vdd = voltdm->vdd; + u8 on_vsel, onlp_vsel, ret_vsel, off_vsel; + u32 val; if (!vdd->pmic_info || !vdd->pmic_info->uv_to_vsel) { pr_err("%s: PMIC info requried to configure vc for" @@ -259,6 +244,17 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm) vc->cmd_reg_addr << __ffs(vc->smps_cmdra_mask), vc->common->smps_cmdra_reg); + /* Set up the on, inactive, retention and off voltage */ + on_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->on_volt); + onlp_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->onlp_volt); + ret_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->ret_volt); + off_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->off_volt); + val = ((on_vsel << vc->common->cmd_on_shift) | + (onlp_vsel << vc->common->cmd_onlp_shift) | + (ret_vsel << vc->common->cmd_ret_shift) | + (off_vsel << vc->common->cmd_off_shift)); + voltdm->write(val, vc->cmdval_reg); + /* Configure the setup times */ voltdm->rmw(voltdm->vfsm->voltsetup_mask, vc->setup_time << __ffs(voltdm->vfsm->voltsetup_mask), -- cgit v1.2.3 From 24d3194a2c9bc4d2315117915d4d22c395c07fd5 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 29 Mar 2011 15:57:16 -0700 Subject: OMAP3+: VC: abstract out channel configuration VC channel configuration is programmed based on settings coming from the PMIC configuration. Currently, the VC channel to PMIC mapping is a simple one-to-one mapping. Whenever a VC channel parameter is configured (i2c slave addres, PMIC register address, on/ret/off command), the corresponding bits are enabled in the VC channel configuration register. If necessary, the programmability of channel configuration settings could be extended to board/PMIC files, however, because this patch changes the channel configuration to be programmed based on existing values from the PMIC settings, it may not be required. Also note that starting with OMAP4, where there are more than 2 channels, one channel is identified as the "default" channel. When any of the bits in the channel config for the other channels are zero, it means to use the default channel. The OMAP4 TRM (at least through NDA version Q) is wrong in describing which is the default channel. The default channel on OMAP4 is MPU, not CORE as decribed in the TRM. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/vc.c | 70 ++++++++++++++++++++++++++++++++------- arch/arm/mach-omap2/vc.h | 8 +++++ arch/arm/mach-omap2/vc3xxx_data.c | 3 ++ arch/arm/mach-omap2/vc44xx_data.c | 5 +++ 4 files changed, 74 insertions(+), 12 deletions(-) diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index 72c9cb64a42b..1791f79112bf 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -19,6 +19,52 @@ #include "prm-regbits-44xx.h" #include "prm44xx.h" +/* + * Channel configuration bits, common for OMAP3 & 4 + * OMAP3 register: PRM_VC_CH_CONF + * OMAP4 register: PRM_VC_CFG_CHANNEL + */ +#define CFG_CHANNEL_SA BIT(0) +#define CFG_CHANNEL_RAV BIT(1) +#define CFG_CHANNEL_RAC BIT(2) +#define CFG_CHANNEL_RACEN BIT(3) +#define CFG_CHANNEL_CMD BIT(4) +#define CFG_CHANNEL_MASK 0x3f + +/** + * omap_vc_config_channel - configure VC channel to PMIC mappings + * @voltdm: pointer to voltagdomain defining the desired VC channel + * + * Configures the VC channel to PMIC mappings for the following + * PMIC settings + * - i2c slave address (SA) + * - voltage configuration address (RAV) + * - command configuration address (RAC) and enable bit (RACEN) + * - command values for ON, ONLP, RET and OFF (CMD) + * + * This function currently only allows flexible configuration of the + * non-default channel. Starting with OMAP4, there are more than 2 + * channels, with one defined as the default (on OMAP4, it's MPU.) + * Only the non-default channel can be configured. + */ +static int omap_vc_config_channel(struct voltagedomain *voltdm) +{ + struct omap_vc_channel *vc = voltdm->vc; + + /* + * For default channel, the only configurable bit is RACEN. + * All others must stay at zero (see function comment above.) + */ + if (vc->flags & OMAP_VC_CHANNEL_DEFAULT) + vc->cfg_channel &= CFG_CHANNEL_RACEN; + + voltdm->rmw(CFG_CHANNEL_MASK << vc->cfg_channel_sa_shift, + vc->cfg_channel << vc->cfg_channel_sa_shift, + vc->common->cfg_channel_reg); + + return 0; +} + /* Voltage scale and accessory APIs */ int omap_vc_pre_scale(struct voltagedomain *voltdm, unsigned long target_volt, @@ -166,8 +212,6 @@ static void __init omap3_vc_init_channel(struct voltagedomain *voltdm) * Generic VC parameters init * XXX This data should be abstracted out */ - voltdm->write(OMAP3430_CMD1_MASK | OMAP3430_RAV1_MASK, - OMAP3_PRM_VC_CH_CONF_OFFSET); voltdm->write(OMAP3430_MCODE_SHIFT | OMAP3430_HSEN_MASK, OMAP3_PRM_VC_I2C_CFG_OFFSET); @@ -186,15 +230,6 @@ static void __init omap4_vc_init_channel(struct voltagedomain *voltdm) if (is_initialized) return; - /* - * Generic VC parameters init - * XXX This data should be abstracted out - */ - vc_val = (OMAP4430_RAV_VDD_MPU_L_MASK | OMAP4430_CMD_VDD_MPU_L_MASK | - OMAP4430_RAV_VDD_IVA_L_MASK | OMAP4430_CMD_VDD_IVA_L_MASK | - OMAP4430_RAV_VDD_CORE_L_MASK | OMAP4430_CMD_VDD_CORE_L_MASK); - voltdm->write(vc_val, OMAP4_PRM_VC_CFG_CHANNEL_OFFSET); - /* XXX These are magic numbers and do not belong! */ vc_val = (0x60 << OMAP4430_SCLL_SHIFT | 0x26 << OMAP4430_SCLH_SHIFT); voltdm->write(vc_val, OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET); @@ -222,6 +257,8 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm) return; } + vc->cfg_channel = 0; + /* get PMIC/board specific settings */ vc->i2c_slave_addr = vdd->pmic_info->i2c_slave_addr; vc->volt_reg_addr = vdd->pmic_info->volt_reg_addr; @@ -232,6 +269,7 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm) voltdm->rmw(vc->smps_sa_mask, vc->i2c_slave_addr << __ffs(vc->smps_sa_mask), vc->common->smps_sa_reg); + vc->cfg_channel |= CFG_CHANNEL_SA; /* * Configure the PMIC register addresses. @@ -239,10 +277,14 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm) voltdm->rmw(vc->smps_volra_mask, vc->volt_reg_addr << __ffs(vc->smps_volra_mask), vc->common->smps_volra_reg); - if (vc->cmd_reg_addr) + vc->cfg_channel |= CFG_CHANNEL_RAV; + + if (vc->cmd_reg_addr) { voltdm->rmw(vc->smps_cmdra_mask, vc->cmd_reg_addr << __ffs(vc->smps_cmdra_mask), vc->common->smps_cmdra_reg); + vc->cfg_channel |= CFG_CHANNEL_RAC | CFG_CHANNEL_RACEN; + } /* Set up the on, inactive, retention and off voltage */ on_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->on_volt); @@ -254,6 +296,10 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm) (ret_vsel << vc->common->cmd_ret_shift) | (off_vsel << vc->common->cmd_off_shift)); voltdm->write(val, vc->cmdval_reg); + vc->cfg_channel |= CFG_CHANNEL_CMD; + + /* Channel configuration */ + omap_vc_config_channel(voltdm); /* Configure the setup times */ voltdm->rmw(voltdm->vfsm->voltsetup_mask, diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h index 6e8806b59823..4e1913748d2a 100644 --- a/arch/arm/mach-omap2/vc.h +++ b/arch/arm/mach-omap2/vc.h @@ -54,8 +54,12 @@ struct omap_vc_common { u8 cmd_onlp_shift; u8 cmd_ret_shift; u8 cmd_off_shift; + u8 cfg_channel_reg; }; +/* omap_vc_channel.flags values */ +#define OMAP_VC_CHANNEL_DEFAULT BIT(0) + /** * struct omap_vc_channel - VC per-instance data * @i2c_slave_addr: I2C slave address of PMIC for this VC channel @@ -67,6 +71,7 @@ struct omap_vc_common { * @smps_volra_mask: VOLRA* bitmask in the PRM_VC_VOL_RA register * @smps_cmdra_mask: CMDRA* bitmask in the PRM_VC_CMD_RA register * @cmdval_reg: register for on/ret/off voltage level values for this channel + * @flags: VC channel-specific flags (optional) */ struct omap_vc_channel { /* channel state */ @@ -74,6 +79,7 @@ struct omap_vc_channel { u16 volt_reg_addr; u16 cmd_reg_addr; u16 setup_time; + u8 cfg_channel; /* register access data */ const struct omap_vc_common *common; @@ -81,6 +87,8 @@ struct omap_vc_channel { u32 smps_volra_mask; u32 smps_cmdra_mask; u8 cmdval_reg; + u8 cfg_channel_sa_shift; + u8 flags; }; extern struct omap_vc_channel omap3_vc_mpu; diff --git a/arch/arm/mach-omap2/vc3xxx_data.c b/arch/arm/mach-omap2/vc3xxx_data.c index df8bd5ead7e4..f4449eb59841 100644 --- a/arch/arm/mach-omap2/vc3xxx_data.c +++ b/arch/arm/mach-omap2/vc3xxx_data.c @@ -43,6 +43,7 @@ static struct omap_vc_common omap3_vc_common = { .cmd_onlp_shift = OMAP3430_VC_CMD_ONLP_SHIFT, .cmd_ret_shift = OMAP3430_VC_CMD_RET_SHIFT, .cmd_off_shift = OMAP3430_VC_CMD_OFF_SHIFT, + .cfg_channel_reg = OMAP3_PRM_VC_CH_CONF_OFFSET, }; struct omap_vc_channel omap3_vc_mpu = { @@ -51,6 +52,7 @@ struct omap_vc_channel omap3_vc_mpu = { .smps_sa_mask = OMAP3430_PRM_VC_SMPS_SA_SA0_MASK, .smps_volra_mask = OMAP3430_VOLRA0_MASK, .smps_cmdra_mask = OMAP3430_CMDRA0_MASK, + .cfg_channel_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA0_SHIFT, }; struct omap_vc_channel omap3_vc_core = { @@ -59,4 +61,5 @@ struct omap_vc_channel omap3_vc_core = { .smps_sa_mask = OMAP3430_PRM_VC_SMPS_SA_SA1_MASK, .smps_volra_mask = OMAP3430_VOLRA1_MASK, .smps_cmdra_mask = OMAP3430_CMDRA1_MASK, + .cfg_channel_sa_shift = OMAP3430_PRM_VC_SMPS_SA_SA1_SHIFT, }; diff --git a/arch/arm/mach-omap2/vc44xx_data.c b/arch/arm/mach-omap2/vc44xx_data.c index 5d104ff662b3..1610bdedee6b 100644 --- a/arch/arm/mach-omap2/vc44xx_data.c +++ b/arch/arm/mach-omap2/vc44xx_data.c @@ -44,15 +44,18 @@ static const struct omap_vc_common omap4_vc_common = { .cmd_onlp_shift = OMAP4430_ONLP_SHIFT, .cmd_ret_shift = OMAP4430_RET_SHIFT, .cmd_off_shift = OMAP4430_OFF_SHIFT, + .cfg_channel_reg = OMAP4_PRM_VC_CFG_CHANNEL_OFFSET, }; /* VC instance data for each controllable voltage line */ struct omap_vc_channel omap4_vc_mpu = { + .flags = OMAP_VC_CHANNEL_DEFAULT, .common = &omap4_vc_common, .cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_MPU_L_OFFSET, .smps_sa_mask = OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_MASK, .smps_volra_mask = OMAP4430_VOLRA_VDD_MPU_L_MASK, .smps_cmdra_mask = OMAP4430_CMDRA_VDD_MPU_L_MASK, + .cfg_channel_sa_shift = OMAP4430_SA_VDD_MPU_L_SHIFT, }; struct omap_vc_channel omap4_vc_iva = { @@ -61,6 +64,7 @@ struct omap_vc_channel omap4_vc_iva = { .smps_sa_mask = OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_MASK, .smps_volra_mask = OMAP4430_VOLRA_VDD_IVA_L_MASK, .smps_cmdra_mask = OMAP4430_CMDRA_VDD_IVA_L_MASK, + .cfg_channel_sa_shift = OMAP4430_SA_VDD_IVA_L_SHIFT, }; struct omap_vc_channel omap4_vc_core = { @@ -69,5 +73,6 @@ struct omap_vc_channel omap4_vc_core = { .smps_sa_mask = OMAP4430_SA_VDD_CORE_L_0_6_MASK, .smps_volra_mask = OMAP4430_VOLRA_VDD_CORE_L_MASK, .smps_cmdra_mask = OMAP4430_CMDRA_VDD_CORE_L_MASK, + .cfg_channel_sa_shift = OMAP4430_SA_VDD_CORE_L_SHIFT, }; -- cgit v1.2.3 From ce8ebe0dfb1f8713337cebf82499d3dced288328 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 30 Mar 2011 11:01:10 -0700 Subject: OMAP3+: voltage domain: move PMIC struct from vdd_info into struct voltagedomain Move structure containing PMIC configurable settings into struct voltagedomain. In the process, rename from omap_volt_pmic_info to omap_voltdm_pmic (_info suffix is not helpful.) No functional changes. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/omap_twl.c | 28 ++++++++++++++-------------- arch/arm/mach-omap2/vc.c | 29 ++++++++++++++--------------- arch/arm/mach-omap2/vc.h | 4 ++++ arch/arm/mach-omap2/voltage.c | 29 ++++++++++++----------------- arch/arm/mach-omap2/voltage.h | 12 +++++------- arch/arm/mach-omap2/vp.c | 13 ++++++------- 6 files changed, 55 insertions(+), 60 deletions(-) diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c index 3249fe3c3c1d..e467d4565a2d 100644 --- a/arch/arm/mach-omap2/omap_twl.c +++ b/arch/arm/mach-omap2/omap_twl.c @@ -143,7 +143,7 @@ static u8 twl6030_uv_to_vsel(unsigned long uv) return DIV_ROUND_UP(uv - 600000, 12500) + 1; } -static struct omap_volt_pmic_info omap3_mpu_volt_info = { +static struct omap_voltdm_pmic omap3_mpu_pmic = { .slew_rate = 4000, .step_size = 12500, .on_volt = 1200000, @@ -163,7 +163,7 @@ static struct omap_volt_pmic_info omap3_mpu_volt_info = { .uv_to_vsel = twl4030_uv_to_vsel, }; -static struct omap_volt_pmic_info omap3_core_volt_info = { +static struct omap_voltdm_pmic omap3_core_pmic = { .slew_rate = 4000, .step_size = 12500, .on_volt = 1200000, @@ -183,7 +183,7 @@ static struct omap_volt_pmic_info omap3_core_volt_info = { .uv_to_vsel = twl4030_uv_to_vsel, }; -static struct omap_volt_pmic_info omap4_mpu_volt_info = { +static struct omap_voltdm_pmic omap4_mpu_pmic = { .slew_rate = 4000, .step_size = 12500, .on_volt = 1350000, @@ -203,7 +203,7 @@ static struct omap_volt_pmic_info omap4_mpu_volt_info = { .uv_to_vsel = twl6030_uv_to_vsel, }; -static struct omap_volt_pmic_info omap4_iva_volt_info = { +static struct omap_voltdm_pmic omap4_iva_pmic = { .slew_rate = 4000, .step_size = 12500, .on_volt = 1100000, @@ -223,7 +223,7 @@ static struct omap_volt_pmic_info omap4_iva_volt_info = { .uv_to_vsel = twl6030_uv_to_vsel, }; -static struct omap_volt_pmic_info omap4_core_volt_info = { +static struct omap_voltdm_pmic omap4_core_pmic = { .slew_rate = 4000, .step_size = 12500, .on_volt = 1100000, @@ -251,13 +251,13 @@ int __init omap4_twl_init(void) return -ENODEV; voltdm = voltdm_lookup("mpu"); - omap_voltage_register_pmic(voltdm, &omap4_mpu_volt_info); + omap_voltage_register_pmic(voltdm, &omap4_mpu_pmic); voltdm = voltdm_lookup("iva"); - omap_voltage_register_pmic(voltdm, &omap4_iva_volt_info); + omap_voltage_register_pmic(voltdm, &omap4_iva_pmic); voltdm = voltdm_lookup("core"); - omap_voltage_register_pmic(voltdm, &omap4_core_volt_info); + omap_voltage_register_pmic(voltdm, &omap4_core_pmic); return 0; } @@ -270,10 +270,10 @@ int __init omap3_twl_init(void) return -ENODEV; if (cpu_is_omap3630()) { - omap3_mpu_volt_info.vp_vddmin = OMAP3630_VP1_VLIMITTO_VDDMIN; - omap3_mpu_volt_info.vp_vddmax = OMAP3630_VP1_VLIMITTO_VDDMAX; - omap3_core_volt_info.vp_vddmin = OMAP3630_VP2_VLIMITTO_VDDMIN; - omap3_core_volt_info.vp_vddmax = OMAP3630_VP2_VLIMITTO_VDDMAX; + omap3_mpu_pmic.vp_vddmin = OMAP3630_VP1_VLIMITTO_VDDMIN; + omap3_mpu_pmic.vp_vddmax = OMAP3630_VP1_VLIMITTO_VDDMAX; + omap3_core_pmic.vp_vddmin = OMAP3630_VP2_VLIMITTO_VDDMIN; + omap3_core_pmic.vp_vddmax = OMAP3630_VP2_VLIMITTO_VDDMAX; } /* @@ -289,10 +289,10 @@ int __init omap3_twl_init(void) omap3_twl_set_sr_bit(true); voltdm = voltdm_lookup("mpu_iva"); - omap_voltage_register_pmic(voltdm, &omap3_mpu_volt_info); + omap_voltage_register_pmic(voltdm, &omap3_mpu_pmic); voltdm = voltdm_lookup("core"); - omap_voltage_register_pmic(voltdm, &omap3_core_volt_info); + omap_voltage_register_pmic(voltdm, &omap3_core_pmic); return 0; } diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index 1791f79112bf..4ac761440d62 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -79,13 +79,13 @@ int omap_vc_pre_scale(struct voltagedomain *voltdm, vp_common = vdd->vp_data->vp_common; /* Check if sufficient pmic info is available for this vdd */ - if (!vdd->pmic_info) { + if (!voltdm->pmic) { pr_err("%s: Insufficient pmic info to scale the vdd_%s\n", __func__, voltdm->name); return -EINVAL; } - if (!vdd->pmic_info->uv_to_vsel) { + if (!voltdm->pmic->uv_to_vsel) { pr_err("%s: PMIC function to convert voltage in uV to" "vsel not registered. Hence unable to scale voltage" "for vdd_%s\n", __func__, voltdm->name); @@ -103,7 +103,7 @@ int omap_vc_pre_scale(struct voltagedomain *voltdm, if (IS_ERR(volt_data)) volt_data = NULL; - *target_vsel = vdd->pmic_info->uv_to_vsel(target_volt); + *target_vsel = voltdm->pmic->uv_to_vsel(target_volt); *current_vsel = voltdm->read(vdd->vp_data->voltage); /* Setting the ON voltage to the new target voltage */ @@ -134,8 +134,8 @@ void omap_vc_post_scale(struct voltagedomain *voltdm, smps_steps = abs(target_vsel - current_vsel); /* SMPS slew rate / step size. 2us added as buffer. */ - smps_delay = ((smps_steps * vdd->pmic_info->step_size) / - vdd->pmic_info->slew_rate) + 2; + smps_delay = ((smps_steps * voltdm->pmic->step_size) / + voltdm->pmic->slew_rate) + 2; udelay(smps_delay); vdd->curr_volt = target_volt; @@ -240,11 +240,10 @@ static void __init omap4_vc_init_channel(struct voltagedomain *voltdm) void __init omap_vc_init_channel(struct voltagedomain *voltdm) { struct omap_vc_channel *vc = voltdm->vc; - struct omap_vdd_info *vdd = voltdm->vdd; u8 on_vsel, onlp_vsel, ret_vsel, off_vsel; u32 val; - if (!vdd->pmic_info || !vdd->pmic_info->uv_to_vsel) { + if (!voltdm->pmic || !voltdm->pmic->uv_to_vsel) { pr_err("%s: PMIC info requried to configure vc for" "vdd_%s not populated.Hence cannot initialize vc\n", __func__, voltdm->name); @@ -260,10 +259,10 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm) vc->cfg_channel = 0; /* get PMIC/board specific settings */ - vc->i2c_slave_addr = vdd->pmic_info->i2c_slave_addr; - vc->volt_reg_addr = vdd->pmic_info->volt_reg_addr; - vc->cmd_reg_addr = vdd->pmic_info->cmd_reg_addr; - vc->setup_time = vdd->pmic_info->volt_setup_time; + vc->i2c_slave_addr = voltdm->pmic->i2c_slave_addr; + vc->volt_reg_addr = voltdm->pmic->volt_reg_addr; + vc->cmd_reg_addr = voltdm->pmic->cmd_reg_addr; + vc->setup_time = voltdm->pmic->volt_setup_time; /* Configure the i2c slave address for this VC */ voltdm->rmw(vc->smps_sa_mask, @@ -287,10 +286,10 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm) } /* Set up the on, inactive, retention and off voltage */ - on_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->on_volt); - onlp_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->onlp_volt); - ret_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->ret_volt); - off_vsel = vdd->pmic_info->uv_to_vsel(vdd->pmic_info->off_volt); + on_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->on_volt); + onlp_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->onlp_volt); + ret_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->ret_volt); + off_vsel = voltdm->pmic->uv_to_vsel(voltdm->pmic->off_volt); val = ((on_vsel << vc->common->cmd_on_shift) | (onlp_vsel << vc->common->cmd_onlp_shift) | (ret_vsel << vc->common->cmd_ret_shift) | diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h index 4e1913748d2a..fd385285a3bf 100644 --- a/arch/arm/mach-omap2/vc.h +++ b/arch/arm/mach-omap2/vc.h @@ -36,6 +36,7 @@ struct voltagedomain; * @cmd_onlp_shift: ONLP field shift in PRM_VC_CMD_VAL_* register * @cmd_ret_shift: RET field shift in PRM_VC_CMD_VAL_* register * @cmd_off_shift: OFF field shift in PRM_VC_CMD_VAL_* register + * @cfg_channel_reg: VC channel configuration register * * XXX One of cmd_on_mask and cmd_on_shift are not needed * XXX VALID should probably be a shift, not a mask @@ -66,11 +67,14 @@ struct omap_vc_common { * @volt_reg_addr: voltage configuration register address * @cmd_reg_addr: command configuration register address * @setup_time: setup time (in sys_clk cycles) of regulator for this channel + * @cfg_channel: current value of VC channel configuration register + * * @common: pointer to VC common data for this platform * @smps_sa_mask: i2c slave address bitmask in the PRM_VC_SMPS_SA register * @smps_volra_mask: VOLRA* bitmask in the PRM_VC_VOL_RA register * @smps_cmdra_mask: CMDRA* bitmask in the PRM_VC_CMD_RA register * @cmdval_reg: register for on/ret/off voltage level values for this channel + * @cfg_channel_sa_shift: bit shift for slave address cfg_channel register * @flags: VC channel-specific flags (optional) */ struct omap_vc_channel { diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index 9f9f01465f6a..94f7fc41c27c 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -84,20 +84,20 @@ static int __init _config_common_vdd_data(struct voltagedomain *voltdm) vdd->vp_enabled = false; vdd->vp_rt_data.vpconfig_erroroffset = - (vdd->pmic_info->vp_erroroffset << + (voltdm->pmic->vp_erroroffset << vdd->vp_data->vp_common->vpconfig_erroroffset_shift); - timeout_val = (sys_clk_speed * vdd->pmic_info->vp_timeout_us) / 1000; + timeout_val = (sys_clk_speed * voltdm->pmic->vp_timeout_us) / 1000; vdd->vp_rt_data.vlimitto_timeout = timeout_val; - vdd->vp_rt_data.vlimitto_vddmin = vdd->pmic_info->vp_vddmin; - vdd->vp_rt_data.vlimitto_vddmax = vdd->pmic_info->vp_vddmax; + vdd->vp_rt_data.vlimitto_vddmin = voltdm->pmic->vp_vddmin; + vdd->vp_rt_data.vlimitto_vddmax = voltdm->pmic->vp_vddmax; - waittime = ((vdd->pmic_info->step_size / vdd->pmic_info->slew_rate) * + waittime = ((voltdm->pmic->step_size / voltdm->pmic->slew_rate) * sys_clk_speed) / 1000; vdd->vp_rt_data.vstepmin_smpswaittimemin = waittime; vdd->vp_rt_data.vstepmax_smpswaittimemax = waittime; - vdd->vp_rt_data.vstepmin_stepmin = vdd->pmic_info->vp_vstepmin; - vdd->vp_rt_data.vstepmax_stepmax = vdd->pmic_info->vp_vstepmax; + vdd->vp_rt_data.vstepmin_stepmin = voltdm->pmic->vp_vstepmin; + vdd->vp_rt_data.vstepmax_stepmax = voltdm->pmic->vp_vstepmax; return 0; } @@ -149,10 +149,9 @@ static void __init vdd_debugfs_init(struct voltagedomain *voltdm) static int __init omap_vdd_data_configure(struct voltagedomain *voltdm) { - struct omap_vdd_info *vdd = voltdm->vdd; int ret = -EINVAL; - if (!vdd->pmic_info) { + if (!voltdm->pmic) { pr_err("%s: PMIC info requried to configure vdd_%s not" "populated.Hence cannot initialize vdd_%s\n", __func__, voltdm->name, voltdm->name); @@ -324,24 +323,20 @@ struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm, * omap_voltage_register_pmic() - API to register PMIC specific data * @voltdm: pointer to the VDD for which the PMIC specific data is * to be registered - * @pmic_info: the structure containing pmic info + * @pmic: the structure containing pmic info * * This API is to be called by the SOC/PMIC file to specify the - * pmic specific info as present in omap_volt_pmic_info structure. + * pmic specific info as present in omap_voltdm_pmic structure. */ int omap_voltage_register_pmic(struct voltagedomain *voltdm, - struct omap_volt_pmic_info *pmic_info) + struct omap_voltdm_pmic *pmic) { - struct omap_vdd_info *vdd; - if (!voltdm || IS_ERR(voltdm)) { pr_warning("%s: VDD specified does not exist!\n", __func__); return -EINVAL; } - vdd = voltdm->vdd; - - vdd->pmic_info = pmic_info; + voltdm->pmic = pmic; return 0; } diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h index 99df2d13e42e..43ee7bf57969 100644 --- a/arch/arm/mach-omap2/voltage.h +++ b/arch/arm/mach-omap2/voltage.h @@ -67,6 +67,7 @@ struct voltagedomain { struct list_head pwrdm_list; struct omap_vc_channel *vc; const struct omap_vfsm_instance *vfsm; + struct omap_voltdm_pmic *pmic; /* VC/VP register access functions: SoC specific */ u32 (*read) (u8 offset); @@ -96,7 +97,7 @@ struct omap_volt_data { }; /** - * struct omap_volt_pmic_info - PMIC specific data required by voltage driver. + * struct omap_voltdm_pmic - PMIC specific data required by voltage driver. * @slew_rate: PMIC slew rate (in uv/us) * @step_size: PMIC voltage step size (in uv) * @i2c_slave_addr: I2C slave address of PMIC @@ -105,7 +106,7 @@ struct omap_volt_data { * @vsel_to_uv: PMIC API to convert vsel value to actual voltage in uV. * @uv_to_vsel: PMIC API to convert voltage in uV to vsel value. */ -struct omap_volt_pmic_info { +struct omap_voltdm_pmic { int slew_rate; int step_size; u32 on_volt; @@ -131,8 +132,6 @@ struct omap_volt_pmic_info { * * @volt_data : voltage table having the distinct voltages supported * by the domain and other associated per voltage data. - * @pmic_info : pmic specific parameters which should be populted by - * the pmic drivers. * @vp_data : the register values, shifts, masks for various * vp registers * @vp_rt_data : VP data derived at runtime, not predefined @@ -143,7 +142,6 @@ struct omap_volt_pmic_info { */ struct omap_vdd_info { struct omap_volt_data *volt_data; - struct omap_volt_pmic_info *pmic_info; struct omap_vp_instance_data *vp_data; struct omap_vp_runtime_data vp_rt_data; struct dentry *debug_dir; @@ -165,13 +163,13 @@ unsigned long omap_voltage_get_nom_volt(struct voltagedomain *voltdm); struct dentry *omap_voltage_get_dbgdir(struct voltagedomain *voltdm); #ifdef CONFIG_PM int omap_voltage_register_pmic(struct voltagedomain *voltdm, - struct omap_volt_pmic_info *pmic_info); + struct omap_voltdm_pmic *pmic); void omap_change_voltscale_method(struct voltagedomain *voltdm, int voltscale_method); int omap_voltage_late_init(void); #else static inline int omap_voltage_register_pmic(struct voltagedomain *voltdm, - struct omap_volt_pmic_info *pmic_info) + struct omap_voltdm_pmic *pmic) { return -EINVAL; } diff --git a/arch/arm/mach-omap2/vp.c b/arch/arm/mach-omap2/vp.c index 88ac742a38cf..a3afcbe741e3 100644 --- a/arch/arm/mach-omap2/vp.c +++ b/arch/arm/mach-omap2/vp.c @@ -18,7 +18,6 @@ static void vp_latch_vsel(struct voltagedomain *voltdm) u32 vpconfig; unsigned long uvdc; char vsel; - struct omap_vdd_info *vdd = voltdm->vdd; uvdc = omap_voltage_get_nom_volt(voltdm); if (!uvdc) { @@ -27,13 +26,13 @@ static void vp_latch_vsel(struct voltagedomain *voltdm) return; } - if (!vdd->pmic_info || !vdd->pmic_info->uv_to_vsel) { + if (!voltdm->pmic || !voltdm->pmic->uv_to_vsel) { pr_warning("%s: PMIC function to convert voltage in uV to" " vsel not registered\n", __func__); return; } - vsel = vdd->pmic_info->uv_to_vsel(uvdc); + vsel = voltdm->pmic->uv_to_vsel(uvdc); vpconfig = voltdm->read(vp->vpconfig); vpconfig &= ~(vp->vp_common->vpconfig_initvoltage_mask | @@ -206,13 +205,13 @@ unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm) curr_vsel = voltdm->read(vp->voltage); - if (!vdd->pmic_info || !vdd->pmic_info->vsel_to_uv) { + if (!voltdm->pmic || !voltdm->pmic->vsel_to_uv) { pr_warning("%s: PMIC function to convert vsel to voltage" "in uV not registerd\n", __func__); return 0; } - return vdd->pmic_info->vsel_to_uv(curr_vsel); + return voltdm->pmic->vsel_to_uv(curr_vsel); } /** @@ -323,13 +322,13 @@ static int vp_volt_debug_get(void *data, u64 *val) vsel = voltdm->read(vp->voltage); - if (!vdd->pmic_info->vsel_to_uv) { + if (!voltdm->pmic->vsel_to_uv) { pr_warning("PMIC function to convert vsel to voltage" "in uV not registerd\n"); return -EINVAL; } - *val = vdd->pmic_info->vsel_to_uv(vsel); + *val = voltdm->pmic->vsel_to_uv(vsel); return 0; } -- cgit v1.2.3 From f5395480f5088a86cc8594d29b5c2f07f6995c3d Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 30 Mar 2011 16:36:30 -0700 Subject: OMAP3+: VC: make I2C config programmable with PMIC-specific settings Remove hard-coded I2C configuration in favor of settings that can be configured from PMIC-specific values. Currently only high-speed mode and the master-code value are supported, since they were the only fields currently used, but extending this is now trivial. Thanks to Nishanth Menon for reporting/fixing a sparse problem and making omap_vc_i2c_init() static, as well as finding and fixing a problem with the shift/mask of mcode. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/omap_twl.c | 4 +++ arch/arm/mach-omap2/vc.c | 51 +++++++++++++++++++++++++++++++++------ arch/arm/mach-omap2/vc.h | 8 ++++++ arch/arm/mach-omap2/vc3xxx_data.c | 3 +++ arch/arm/mach-omap2/vc44xx_data.c | 3 +++ arch/arm/mach-omap2/voltage.h | 4 +++ 6 files changed, 66 insertions(+), 7 deletions(-) diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c index e467d4565a2d..6b247d183299 100644 --- a/arch/arm/mach-omap2/omap_twl.c +++ b/arch/arm/mach-omap2/omap_twl.c @@ -159,6 +159,7 @@ static struct omap_voltdm_pmic omap3_mpu_pmic = { .vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US, .i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR, .volt_reg_addr = OMAP3_VDD_MPU_SR_CONTROL_REG, + .i2c_high_speed = true, .vsel_to_uv = twl4030_vsel_to_uv, .uv_to_vsel = twl4030_uv_to_vsel, }; @@ -179,6 +180,7 @@ static struct omap_voltdm_pmic omap3_core_pmic = { .vp_timeout_us = OMAP3_VP_VLIMITTO_TIMEOUT_US, .i2c_slave_addr = OMAP3_SRI2C_SLAVE_ADDR, .volt_reg_addr = OMAP3_VDD_CORE_SR_CONTROL_REG, + .i2c_high_speed = true, .vsel_to_uv = twl4030_vsel_to_uv, .uv_to_vsel = twl4030_uv_to_vsel, }; @@ -199,6 +201,7 @@ static struct omap_voltdm_pmic omap4_mpu_pmic = { .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, .i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR, .volt_reg_addr = OMAP4_VDD_MPU_SR_VOLT_REG, + .i2c_high_speed = true, .vsel_to_uv = twl6030_vsel_to_uv, .uv_to_vsel = twl6030_uv_to_vsel, }; @@ -219,6 +222,7 @@ static struct omap_voltdm_pmic omap4_iva_pmic = { .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, .i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR, .volt_reg_addr = OMAP4_VDD_IVA_SR_VOLT_REG, + .i2c_high_speed = true, .vsel_to_uv = twl6030_vsel_to_uv, .uv_to_vsel = twl6030_uv_to_vsel, }; diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index 4ac761440d62..5d545632388d 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -208,13 +208,6 @@ static void __init omap3_vc_init_channel(struct voltagedomain *voltdm) if (is_initialized) return; - /* - * Generic VC parameters init - * XXX This data should be abstracted out - */ - voltdm->write(OMAP3430_MCODE_SHIFT | OMAP3430_HSEN_MASK, - OMAP3_PRM_VC_I2C_CFG_OFFSET); - omap3_vfsm_init(voltdm); is_initialized = true; @@ -237,6 +230,48 @@ static void __init omap4_vc_init_channel(struct voltagedomain *voltdm) is_initialized = true; } +/** + * omap_vc_i2c_init - initialize I2C interface to PMIC + * @voltdm: voltage domain containing VC data + * + * Use PMIC supplied seetings for I2C high-speed mode and + * master code (if set) and program the VC I2C configuration + * register. + * + * The VC I2C configuration is common to all VC channels, + * so this function only configures I2C for the first VC + * channel registers. All other VC channels will use the + * same configuration. + */ +static void __init omap_vc_i2c_init(struct voltagedomain *voltdm) +{ + struct omap_vc_channel *vc = voltdm->vc; + static bool initialized; + static bool i2c_high_speed; + u8 mcode; + + if (initialized) { + if (voltdm->pmic->i2c_high_speed != i2c_high_speed) + pr_warn("%s: I2C config for all channels must match.", + __func__); + return; + } + + i2c_high_speed = voltdm->pmic->i2c_high_speed; + if (i2c_high_speed) + voltdm->rmw(vc->common->i2c_cfg_hsen_mask, + vc->common->i2c_cfg_hsen_mask, + vc->common->i2c_cfg_reg); + + mcode = voltdm->pmic->i2c_mcode; + if (mcode) + voltdm->rmw(vc->common->i2c_mcode_mask, + mcode << __ffs(vc->common->i2c_mcode_mask), + vc->common->i2c_cfg_reg); + + initialized = true; +} + void __init omap_vc_init_channel(struct voltagedomain *voltdm) { struct omap_vc_channel *vc = voltdm->vc; @@ -305,6 +340,8 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm) vc->setup_time << __ffs(voltdm->vfsm->voltsetup_mask), voltdm->vfsm->voltsetup_reg); + omap_vc_i2c_init(voltdm); + if (cpu_is_omap34xx()) omap3_vc_init_channel(voltdm); else if (cpu_is_omap44xx()) diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h index fd385285a3bf..c86301330b75 100644 --- a/arch/arm/mach-omap2/vc.h +++ b/arch/arm/mach-omap2/vc.h @@ -37,6 +37,9 @@ struct voltagedomain; * @cmd_ret_shift: RET field shift in PRM_VC_CMD_VAL_* register * @cmd_off_shift: OFF field shift in PRM_VC_CMD_VAL_* register * @cfg_channel_reg: VC channel configuration register + * @i2c_cfg_reg: I2C configuration register offset + * @i2c_cfg_hsen_mask: high-speed mode bit field mask in I2C config register + * @i2c_mcode_mask: MCODE field mask for I2C config register * * XXX One of cmd_on_mask and cmd_on_shift are not needed * XXX VALID should probably be a shift, not a mask @@ -56,6 +59,9 @@ struct omap_vc_common { u8 cmd_ret_shift; u8 cmd_off_shift; u8 cfg_channel_reg; + u8 i2c_cfg_reg; + u8 i2c_cfg_hsen_mask; + u8 i2c_mcode_mask; }; /* omap_vc_channel.flags values */ @@ -68,6 +74,7 @@ struct omap_vc_common { * @cmd_reg_addr: command configuration register address * @setup_time: setup time (in sys_clk cycles) of regulator for this channel * @cfg_channel: current value of VC channel configuration register + * @i2c_high_speed: whether or not to use I2C high-speed mode * * @common: pointer to VC common data for this platform * @smps_sa_mask: i2c slave address bitmask in the PRM_VC_SMPS_SA register @@ -84,6 +91,7 @@ struct omap_vc_channel { u16 cmd_reg_addr; u16 setup_time; u8 cfg_channel; + bool i2c_high_speed; /* register access data */ const struct omap_vc_common *common; diff --git a/arch/arm/mach-omap2/vc3xxx_data.c b/arch/arm/mach-omap2/vc3xxx_data.c index f4449eb59841..95d7701300cb 100644 --- a/arch/arm/mach-omap2/vc3xxx_data.c +++ b/arch/arm/mach-omap2/vc3xxx_data.c @@ -44,6 +44,9 @@ static struct omap_vc_common omap3_vc_common = { .cmd_ret_shift = OMAP3430_VC_CMD_RET_SHIFT, .cmd_off_shift = OMAP3430_VC_CMD_OFF_SHIFT, .cfg_channel_reg = OMAP3_PRM_VC_CH_CONF_OFFSET, + .i2c_cfg_hsen_mask = OMAP3430_HSEN_MASK, + .i2c_cfg_reg = OMAP3_PRM_VC_I2C_CFG_OFFSET, + .i2c_mcode_mask = OMAP3430_MCODE_MASK, }; struct omap_vc_channel omap3_vc_mpu = { diff --git a/arch/arm/mach-omap2/vc44xx_data.c b/arch/arm/mach-omap2/vc44xx_data.c index 1610bdedee6b..148be18397f8 100644 --- a/arch/arm/mach-omap2/vc44xx_data.c +++ b/arch/arm/mach-omap2/vc44xx_data.c @@ -45,6 +45,9 @@ static const struct omap_vc_common omap4_vc_common = { .cmd_ret_shift = OMAP4430_RET_SHIFT, .cmd_off_shift = OMAP4430_OFF_SHIFT, .cfg_channel_reg = OMAP4_PRM_VC_CFG_CHANNEL_OFFSET, + .i2c_cfg_reg = OMAP4_PRM_VC_CFG_I2C_MODE_OFFSET, + .i2c_cfg_hsen_mask = OMAP4430_HSMODEEN_MASK, + .i2c_mcode_mask = OMAP4430_HSMCODE_MASK, }; /* VC instance data for each controllable voltage line */ diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h index 43ee7bf57969..a36d2cfa5ca7 100644 --- a/arch/arm/mach-omap2/voltage.h +++ b/arch/arm/mach-omap2/voltage.h @@ -103,6 +103,8 @@ struct omap_volt_data { * @i2c_slave_addr: I2C slave address of PMIC * @volt_reg_addr: voltage configuration register address * @cmd_reg_addr: command (on, on-LP, ret, off) configuration register address + * @i2c_high_speed: whether VC uses I2C high-speed mode to PMIC + * @i2c_mcode: master code value for I2C high-speed preamble transmission * @vsel_to_uv: PMIC API to convert vsel value to actual voltage in uV. * @uv_to_vsel: PMIC API to convert voltage in uV to vsel value. */ @@ -123,6 +125,8 @@ struct omap_voltdm_pmic { u8 vp_vddmin; u8 vp_vddmax; u8 vp_timeout_us; + bool i2c_high_speed; + u8 i2c_mcode; unsigned long (*vsel_to_uv) (const u8 vsel); u8 (*uv_to_vsel) (unsigned long uV); }; -- cgit v1.2.3 From 8abc0b58fdb89124d8278f110f523b27c666d36c Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Thu, 2 Jun 2011 17:28:13 -0700 Subject: OMAP3+: PM: VC: handle mutant channel config for OMAP4 MPU channel On OMAP3+, all VC channels have the the same bitfield ordering for all VC channels, except the OMAP4 MPU channel. This appears to be a freak accident as all other VC channel (including OMAP5) have the standard configuration. Handle the mutant case by adding a per-channel flag to signal the deformity and handle it during VC init. Special thanks to Nishanth Menon for finding this problem and for proposing the initial solution. Cc: Nishanth Menon Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/vc.c | 64 +++++++++++++++++++++++++++++++-------- arch/arm/mach-omap2/vc.h | 1 + arch/arm/mach-omap2/vc44xx_data.c | 2 +- 3 files changed, 53 insertions(+), 14 deletions(-) diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index 5d545632388d..f53d1f5acce1 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -19,17 +19,51 @@ #include "prm-regbits-44xx.h" #include "prm44xx.h" -/* - * Channel configuration bits, common for OMAP3 & 4 +/** + * struct omap_vc_channel_cfg - describe the cfg_channel bitfield + * @sa: bit for slave address + * @rav: bit for voltage configuration register + * @rac: bit for command configuration register + * @racen: enable bit for RAC + * @cmd: bit for command value set selection + * + * Channel configuration bits, common for OMAP3+ * OMAP3 register: PRM_VC_CH_CONF * OMAP4 register: PRM_VC_CFG_CHANNEL + * OMAP5 register: PRM_VC_SMPS__CONFIG */ -#define CFG_CHANNEL_SA BIT(0) -#define CFG_CHANNEL_RAV BIT(1) -#define CFG_CHANNEL_RAC BIT(2) -#define CFG_CHANNEL_RACEN BIT(3) -#define CFG_CHANNEL_CMD BIT(4) -#define CFG_CHANNEL_MASK 0x3f +struct omap_vc_channel_cfg { + u8 sa; + u8 rav; + u8 rac; + u8 racen; + u8 cmd; +}; + +static struct omap_vc_channel_cfg vc_default_channel_cfg = { + .sa = BIT(0), + .rav = BIT(1), + .rac = BIT(2), + .racen = BIT(3), + .cmd = BIT(4), +}; + +/* + * On OMAP3+, all VC channels have the above default bitfield + * configuration, except the OMAP4 MPU channel. This appears + * to be a freak accident as every other VC channel has the + * default configuration, thus creating a mutant channel config. + */ +static struct omap_vc_channel_cfg vc_mutant_channel_cfg = { + .sa = BIT(0), + .rav = BIT(2), + .rac = BIT(3), + .racen = BIT(4), + .cmd = BIT(1), +}; + +static struct omap_vc_channel_cfg *vc_cfg_bits; +#define CFG_CHANNEL_MASK 0x1f /** * omap_vc_config_channel - configure VC channel to PMIC mappings @@ -56,7 +90,7 @@ static int omap_vc_config_channel(struct voltagedomain *voltdm) * All others must stay at zero (see function comment above.) */ if (vc->flags & OMAP_VC_CHANNEL_DEFAULT) - vc->cfg_channel &= CFG_CHANNEL_RACEN; + vc->cfg_channel &= vc_cfg_bits->racen; voltdm->rmw(CFG_CHANNEL_MASK << vc->cfg_channel_sa_shift, vc->cfg_channel << vc->cfg_channel_sa_shift, @@ -292,6 +326,10 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm) } vc->cfg_channel = 0; + if (vc->flags & OMAP_VC_CHANNEL_CFG_MUTANT) + vc_cfg_bits = &vc_mutant_channel_cfg; + else + vc_cfg_bits = &vc_default_channel_cfg; /* get PMIC/board specific settings */ vc->i2c_slave_addr = voltdm->pmic->i2c_slave_addr; @@ -303,7 +341,7 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm) voltdm->rmw(vc->smps_sa_mask, vc->i2c_slave_addr << __ffs(vc->smps_sa_mask), vc->common->smps_sa_reg); - vc->cfg_channel |= CFG_CHANNEL_SA; + vc->cfg_channel |= vc_cfg_bits->sa; /* * Configure the PMIC register addresses. @@ -311,13 +349,13 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm) voltdm->rmw(vc->smps_volra_mask, vc->volt_reg_addr << __ffs(vc->smps_volra_mask), vc->common->smps_volra_reg); - vc->cfg_channel |= CFG_CHANNEL_RAV; + vc->cfg_channel |= vc_cfg_bits->rav; if (vc->cmd_reg_addr) { voltdm->rmw(vc->smps_cmdra_mask, vc->cmd_reg_addr << __ffs(vc->smps_cmdra_mask), vc->common->smps_cmdra_reg); - vc->cfg_channel |= CFG_CHANNEL_RAC | CFG_CHANNEL_RACEN; + vc->cfg_channel |= vc_cfg_bits->rac | vc_cfg_bits->racen; } /* Set up the on, inactive, retention and off voltage */ @@ -330,7 +368,7 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm) (ret_vsel << vc->common->cmd_ret_shift) | (off_vsel << vc->common->cmd_off_shift)); voltdm->write(val, vc->cmdval_reg); - vc->cfg_channel |= CFG_CHANNEL_CMD; + vc->cfg_channel |= vc_cfg_bits->cmd; /* Channel configuration */ omap_vc_config_channel(voltdm); diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h index c86301330b75..7ed70e07becf 100644 --- a/arch/arm/mach-omap2/vc.h +++ b/arch/arm/mach-omap2/vc.h @@ -66,6 +66,7 @@ struct omap_vc_common { /* omap_vc_channel.flags values */ #define OMAP_VC_CHANNEL_DEFAULT BIT(0) +#define OMAP_VC_CHANNEL_CFG_MUTANT BIT(1) /** * struct omap_vc_channel - VC per-instance data diff --git a/arch/arm/mach-omap2/vc44xx_data.c b/arch/arm/mach-omap2/vc44xx_data.c index 148be18397f8..0a4fc37877cc 100644 --- a/arch/arm/mach-omap2/vc44xx_data.c +++ b/arch/arm/mach-omap2/vc44xx_data.c @@ -52,7 +52,7 @@ static const struct omap_vc_common omap4_vc_common = { /* VC instance data for each controllable voltage line */ struct omap_vc_channel omap4_vc_mpu = { - .flags = OMAP_VC_CHANNEL_DEFAULT, + .flags = OMAP_VC_CHANNEL_DEFAULT | OMAP_VC_CHANNEL_CFG_MUTANT, .common = &omap4_vc_common, .cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_MPU_L_OFFSET, .smps_sa_mask = OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_MASK, -- cgit v1.2.3 From d7b0de2b46803062148345ae6a976c1e44a457b6 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 18 Jul 2011 15:31:00 -0700 Subject: OMAP3+: VC: use last nominal voltage setting to get current_vsel Instead of reading current vsel value from the VP's voltage register, just use current nominal voltage translated into vsel via the PMIC. Doing this allows VC bypass scaling to work even without a VP configured. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/vc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index f53d1f5acce1..21ffde86ad83 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -138,7 +138,7 @@ int omap_vc_pre_scale(struct voltagedomain *voltdm, volt_data = NULL; *target_vsel = voltdm->pmic->uv_to_vsel(target_volt); - *current_vsel = voltdm->read(vdd->vp_data->voltage); + *current_vsel = voltdm->pmic->uv_to_vsel(vdd->curr_volt); /* Setting the ON voltage to the new target voltage */ vc_cmdval = voltdm->read(vc->cmdval_reg); -- cgit v1.2.3 From b7ea803e55769768d1eff3b32e4f99837fa6ddb5 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 4 Apr 2011 15:25:07 -0700 Subject: OMAP3+: VP: cleanup: move VP instance into voltdm, misc. renames - move VP instance struct from vdd_info into struct voltage domain - remove _data suffix from structure name - rename vp_ prefix from vp_common field: accesses are now vp->common - move vp_enabled bool from vdd_info into VP instance - remove remaining references to omap_vdd_info No functional changes. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/vc.c | 11 ++-- arch/arm/mach-omap2/voltage.c | 4 +- arch/arm/mach-omap2/voltage.h | 7 +-- arch/arm/mach-omap2/voltagedomains3xxx_data.c | 10 ++- arch/arm/mach-omap2/voltagedomains44xx_data.c | 15 ++--- arch/arm/mach-omap2/vp.c | 88 +++++++++++++-------------- arch/arm/mach-omap2/vp.h | 24 ++++---- arch/arm/mach-omap2/vp3xxx_data.c | 10 +-- arch/arm/mach-omap2/vp44xx_data.c | 14 ++--- 9 files changed, 84 insertions(+), 99 deletions(-) diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index 21ffde86ad83..e872a0369afb 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -107,11 +107,8 @@ int omap_vc_pre_scale(struct voltagedomain *voltdm, struct omap_vc_channel *vc = voltdm->vc; struct omap_vdd_info *vdd = voltdm->vdd; struct omap_volt_data *volt_data; - const struct omap_vp_common_data *vp_common; u32 vc_cmdval, vp_errgain_val; - vp_common = vdd->vp_data->vp_common; - /* Check if sufficient pmic info is available for this vdd */ if (!voltdm->pmic) { pr_err("%s: Insufficient pmic info to scale the vdd_%s\n", @@ -148,12 +145,12 @@ int omap_vc_pre_scale(struct voltagedomain *voltdm, /* Setting vp errorgain based on the voltage */ if (volt_data) { - vp_errgain_val = voltdm->read(vdd->vp_data->vpconfig); + vp_errgain_val = voltdm->read(voltdm->vp->vpconfig); vdd->vp_rt_data.vpconfig_errorgain = volt_data->vp_errgain; - vp_errgain_val &= ~vp_common->vpconfig_errorgain_mask; + vp_errgain_val &= voltdm->vp->common->vpconfig_errorgain_mask; vp_errgain_val |= vdd->vp_rt_data.vpconfig_errorgain << - vp_common->vpconfig_errorgain_shift; - voltdm->write(vp_errgain_val, vdd->vp_data->vpconfig); + voltdm->vp->common->vpconfig_errorgain_shift; + voltdm->write(vp_errgain_val, voltdm->vp->vpconfig); } return 0; diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index 94f7fc41c27c..c22b53c42193 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -81,11 +81,11 @@ static int __init _config_common_vdd_data(struct voltagedomain *voltdm) /* Generic voltage parameters */ vdd->volt_scale = omap_vp_forceupdate_scale; - vdd->vp_enabled = false; + voltdm->vp->enabled = false; vdd->vp_rt_data.vpconfig_erroroffset = (voltdm->pmic->vp_erroroffset << - vdd->vp_data->vp_common->vpconfig_erroroffset_shift); + voltdm->vp->common->vpconfig_erroroffset_shift); timeout_val = (sys_clk_speed * voltdm->pmic->vp_timeout_us) / 1000; vdd->vp_rt_data.vlimitto_timeout = timeout_val; diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h index a36d2cfa5ca7..1ea735431ee0 100644 --- a/arch/arm/mach-omap2/voltage.h +++ b/arch/arm/mach-omap2/voltage.h @@ -55,6 +55,7 @@ struct omap_vfsm_instance { * @node: list_head linking all voltage domains * @pwrdm_list: list_head linking all powerdomains in this voltagedomain * @vc: pointer to VC channel associated with this voltagedomain + * @vp: pointer to VP associated with this voltagedomain * @read: read a VC/VP register * @write: write a VC/VP register * @read: read-modify-write a VC/VP register @@ -67,6 +68,7 @@ struct voltagedomain { struct list_head pwrdm_list; struct omap_vc_channel *vc; const struct omap_vfsm_instance *vfsm; + struct omap_vp_instance *vp; struct omap_voltdm_pmic *pmic; /* VC/VP register access functions: SoC specific */ @@ -136,21 +138,16 @@ struct omap_voltdm_pmic { * * @volt_data : voltage table having the distinct voltages supported * by the domain and other associated per voltage data. - * @vp_data : the register values, shifts, masks for various - * vp registers * @vp_rt_data : VP data derived at runtime, not predefined * @debug_dir : debug directory for this voltage domain. * @curr_volt : current voltage for this vdd. - * @vp_enabled : flag to keep track of whether vp is enabled or not * @volt_scale : API to scale the voltage of the vdd. */ struct omap_vdd_info { struct omap_volt_data *volt_data; - struct omap_vp_instance_data *vp_data; struct omap_vp_runtime_data vp_rt_data; struct dentry *debug_dir; u32 curr_volt; - bool vp_enabled; int (*volt_scale) (struct voltagedomain *voltdm, unsigned long target_volt); diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c index ce5a7971addf..35117fcd55cf 100644 --- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c +++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c @@ -36,18 +36,14 @@ static const struct omap_vfsm_instance omap3_vdd1_vfsm = { .voltsetup_mask = OMAP3430_SETUP_TIME1_MASK, }; -static struct omap_vdd_info omap3_vdd1_info = { - .vp_data = &omap3_vp1_data, -}; +static struct omap_vdd_info omap3_vdd1_info; static const struct omap_vfsm_instance omap3_vdd2_vfsm = { .voltsetup_reg = OMAP3_PRM_VOLTSETUP1_OFFSET, .voltsetup_mask = OMAP3430_SETUP_TIME2_MASK, }; -static struct omap_vdd_info omap3_vdd2_info = { - .vp_data = &omap3_vp2_data, -}; +static struct omap_vdd_info omap3_vdd2_info; static struct voltagedomain omap3_voltdm_mpu = { .name = "mpu_iva", @@ -57,6 +53,7 @@ static struct voltagedomain omap3_voltdm_mpu = { .rmw = omap3_prm_vcvp_rmw, .vc = &omap3_vc_mpu, .vfsm = &omap3_vdd1_vfsm, + .vp = &omap3_vp_mpu, .vdd = &omap3_vdd1_info, }; @@ -68,6 +65,7 @@ static struct voltagedomain omap3_voltdm_core = { .rmw = omap3_prm_vcvp_rmw, .vc = &omap3_vc_core, .vfsm = &omap3_vdd2_vfsm, + .vp = &omap3_vp_core, .vdd = &omap3_vdd2_info, }; diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c b/arch/arm/mach-omap2/voltagedomains44xx_data.c index dd4bd222739a..3e7cb4e0a63a 100644 --- a/arch/arm/mach-omap2/voltagedomains44xx_data.c +++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c @@ -36,25 +36,19 @@ static const struct omap_vfsm_instance omap4_vdd_mpu_vfsm = { .voltsetup_reg = OMAP4_PRM_VOLTSETUP_MPU_RET_SLEEP_OFFSET, }; -static struct omap_vdd_info omap4_vdd_mpu_info = { - .vp_data = &omap4_vp_mpu_data, -}; +static struct omap_vdd_info omap4_vdd_mpu_info; static const struct omap_vfsm_instance omap4_vdd_iva_vfsm = { .voltsetup_reg = OMAP4_PRM_VOLTSETUP_IVA_RET_SLEEP_OFFSET, }; -static struct omap_vdd_info omap4_vdd_iva_info = { - .vp_data = &omap4_vp_iva_data, -}; +static struct omap_vdd_info omap4_vdd_iva_info; static const struct omap_vfsm_instance omap4_vdd_core_vfsm = { .voltsetup_reg = OMAP4_PRM_VOLTSETUP_CORE_RET_SLEEP_OFFSET, }; -static struct omap_vdd_info omap4_vdd_core_info = { - .vp_data = &omap4_vp_core_data, -}; +static struct omap_vdd_info omap4_vdd_core_info; static struct voltagedomain omap4_voltdm_mpu = { .name = "mpu", @@ -64,6 +58,7 @@ static struct voltagedomain omap4_voltdm_mpu = { .rmw = omap4_prm_vcvp_rmw, .vc = &omap4_vc_mpu, .vfsm = &omap4_vdd_mpu_vfsm, + .vp = &omap4_vp_mpu, .vdd = &omap4_vdd_mpu_info, }; @@ -75,6 +70,7 @@ static struct voltagedomain omap4_voltdm_iva = { .rmw = omap4_prm_vcvp_rmw, .vc = &omap4_vc_iva, .vfsm = &omap4_vdd_iva_vfsm, + .vp = &omap4_vp_iva, .vdd = &omap4_vdd_iva_info, }; @@ -86,6 +82,7 @@ static struct voltagedomain omap4_voltdm_core = { .rmw = omap4_prm_vcvp_rmw, .vc = &omap4_vc_core, .vfsm = &omap4_vdd_core_vfsm, + .vp = &omap4_vp_core, .vdd = &omap4_vdd_core_info, }; diff --git a/arch/arm/mach-omap2/vp.c b/arch/arm/mach-omap2/vp.c index a3afcbe741e3..53d6018fa678 100644 --- a/arch/arm/mach-omap2/vp.c +++ b/arch/arm/mach-omap2/vp.c @@ -14,7 +14,7 @@ static void __init vp_debugfs_init(struct voltagedomain *voltdm); static void vp_latch_vsel(struct voltagedomain *voltdm) { - struct omap_vp_instance_data *vp = voltdm->vdd->vp_data; + struct omap_vp_instance *vp = voltdm->vp; u32 vpconfig; unsigned long uvdc; char vsel; @@ -35,14 +35,14 @@ static void vp_latch_vsel(struct voltagedomain *voltdm) vsel = voltdm->pmic->uv_to_vsel(uvdc); vpconfig = voltdm->read(vp->vpconfig); - vpconfig &= ~(vp->vp_common->vpconfig_initvoltage_mask | - vp->vp_common->vpconfig_initvdd); - vpconfig |= vsel << vp->vp_common->vpconfig_initvoltage_shift; + vpconfig &= ~(vp->common->vpconfig_initvoltage_mask | + vp->common->vpconfig_initvdd); + vpconfig |= vsel << vp->common->vpconfig_initvoltage_shift; voltdm->write(vpconfig, vp->vpconfig); /* Trigger initVDD value copy to voltage processor */ - voltdm->write((vpconfig | vp->vp_common->vpconfig_initvdd), + voltdm->write((vpconfig | vp->common->vpconfig_initvdd), vp->vpconfig); /* Clear initVDD copy trigger bit */ @@ -52,7 +52,7 @@ static void vp_latch_vsel(struct voltagedomain *voltdm) /* Generic voltage init functions */ void __init omap_vp_init(struct voltagedomain *voltdm) { - struct omap_vp_instance_data *vp = voltdm->vdd->vp_data; + struct omap_vp_instance *vp = voltdm->vp; struct omap_vdd_info *vdd = voltdm->vdd; u32 vp_val; @@ -64,28 +64,28 @@ void __init omap_vp_init(struct voltagedomain *voltdm) vp_val = vdd->vp_rt_data.vpconfig_erroroffset | (vdd->vp_rt_data.vpconfig_errorgain << - vp->vp_common->vpconfig_errorgain_shift) | - vp->vp_common->vpconfig_timeouten; + vp->common->vpconfig_errorgain_shift) | + vp->common->vpconfig_timeouten; voltdm->write(vp_val, vp->vpconfig); vp_val = ((vdd->vp_rt_data.vstepmin_smpswaittimemin << - vp->vp_common->vstepmin_smpswaittimemin_shift) | + vp->common->vstepmin_smpswaittimemin_shift) | (vdd->vp_rt_data.vstepmin_stepmin << - vp->vp_common->vstepmin_stepmin_shift)); + vp->common->vstepmin_stepmin_shift)); voltdm->write(vp_val, vp->vstepmin); vp_val = ((vdd->vp_rt_data.vstepmax_smpswaittimemax << - vp->vp_common->vstepmax_smpswaittimemax_shift) | + vp->common->vstepmax_smpswaittimemax_shift) | (vdd->vp_rt_data.vstepmax_stepmax << - vp->vp_common->vstepmax_stepmax_shift)); + vp->common->vstepmax_stepmax_shift)); voltdm->write(vp_val, vp->vstepmax); vp_val = ((vdd->vp_rt_data.vlimitto_vddmax << - vp->vp_common->vlimitto_vddmax_shift) | + vp->common->vlimitto_vddmax_shift) | (vdd->vp_rt_data.vlimitto_vddmin << - vp->vp_common->vlimitto_vddmin_shift) | + vp->common->vlimitto_vddmin_shift) | (vdd->vp_rt_data.vlimitto_timeout << - vp->vp_common->vlimitto_timeout_shift)); + vp->common->vlimitto_timeout_shift)); voltdm->write(vp_val, vp->vlimitto); vp_debugfs_init(voltdm); @@ -95,7 +95,7 @@ void __init omap_vp_init(struct voltagedomain *voltdm) int omap_vp_forceupdate_scale(struct voltagedomain *voltdm, unsigned long target_volt) { - struct omap_vp_instance_data *vp = voltdm->vdd->vp_data; + struct omap_vp_instance *vp = voltdm->vp; u32 vpconfig; u8 target_vsel, current_vsel; int ret, timeout = 0; @@ -109,8 +109,8 @@ int omap_vp_forceupdate_scale(struct voltagedomain *voltdm, * is <3us */ while (timeout++ < VP_TRANXDONE_TIMEOUT) { - vp->vp_common->ops->clear_txdone(vp->id); - if (!vp->vp_common->ops->check_txdone(vp->id)) + vp->common->ops->clear_txdone(vp->id); + if (!vp->common->ops->check_txdone(vp->id)) break; udelay(1); } @@ -122,19 +122,19 @@ int omap_vp_forceupdate_scale(struct voltagedomain *voltdm, /* Configure for VP-Force Update */ vpconfig = voltdm->read(vp->vpconfig); - vpconfig &= ~(vp->vp_common->vpconfig_initvdd | - vp->vp_common->vpconfig_forceupdate | - vp->vp_common->vpconfig_initvoltage_mask); + vpconfig &= ~(vp->common->vpconfig_initvdd | + vp->common->vpconfig_forceupdate | + vp->common->vpconfig_initvoltage_mask); vpconfig |= ((target_vsel << - vp->vp_common->vpconfig_initvoltage_shift)); + vp->common->vpconfig_initvoltage_shift)); voltdm->write(vpconfig, vp->vpconfig); /* Trigger initVDD value copy to voltage processor */ - vpconfig |= vp->vp_common->vpconfig_initvdd; + vpconfig |= vp->common->vpconfig_initvdd; voltdm->write(vpconfig, vp->vpconfig); /* Force update of voltage */ - vpconfig |= vp->vp_common->vpconfig_forceupdate; + vpconfig |= vp->common->vpconfig_forceupdate; voltdm->write(vpconfig, vp->vpconfig); /* @@ -142,7 +142,7 @@ int omap_vp_forceupdate_scale(struct voltagedomain *voltdm, * Depends on SMPSWAITTIMEMIN/MAX and voltage change */ timeout = 0; - omap_test_timeout(vp->vp_common->ops->check_txdone(vp->id), + omap_test_timeout(vp->common->ops->check_txdone(vp->id), VP_TRANXDONE_TIMEOUT, timeout); if (timeout >= VP_TRANXDONE_TIMEOUT) pr_err("%s: vdd_%s TRANXDONE timeout exceeded." @@ -157,8 +157,8 @@ int omap_vp_forceupdate_scale(struct voltagedomain *voltdm, */ timeout = 0; while (timeout++ < VP_TRANXDONE_TIMEOUT) { - vp->vp_common->ops->clear_txdone(vp->id); - if (!vp->vp_common->ops->check_txdone(vp->id)) + vp->common->ops->clear_txdone(vp->id); + if (!vp->common->ops->check_txdone(vp->id)) break; udelay(1); } @@ -170,10 +170,10 @@ int omap_vp_forceupdate_scale(struct voltagedomain *voltdm, vpconfig = voltdm->read(vp->vpconfig); /* Clear initVDD copy trigger bit */ - vpconfig &= ~vp->vp_common->vpconfig_initvdd; + vpconfig &= ~vp->common->vpconfig_initvdd; voltdm->write(vpconfig, vp->vpconfig); /* Clear force bit */ - vpconfig &= ~vp->vp_common->vpconfig_forceupdate; + vpconfig &= ~vp->common->vpconfig_forceupdate; voltdm->write(vpconfig, vp->vpconfig); return 0; @@ -187,8 +187,7 @@ int omap_vp_forceupdate_scale(struct voltagedomain *voltdm, */ unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm) { - struct omap_vp_instance_data *vp = voltdm->vdd->vp_data; - struct omap_vdd_info *vdd; + struct omap_vp_instance *vp = voltdm->vp; u8 curr_vsel; if (!voltdm || IS_ERR(voltdm)) { @@ -196,7 +195,6 @@ unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm) return 0; } - vdd = voltdm->vdd; if (!voltdm->read) { pr_err("%s: No read API for reading vdd_%s regs\n", __func__, voltdm->name); @@ -223,8 +221,7 @@ unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm) */ void omap_vp_enable(struct voltagedomain *voltdm) { - struct omap_vp_instance_data *vp; - struct omap_vdd_info *vdd; + struct omap_vp_instance *vp; u32 vpconfig; if (!voltdm || IS_ERR(voltdm)) { @@ -232,8 +229,7 @@ void omap_vp_enable(struct voltagedomain *voltdm) return; } - vdd = voltdm->vdd; - vp = voltdm->vdd->vp_data; + vp = voltdm->vp; if (!voltdm->read || !voltdm->write) { pr_err("%s: No read/write API for accessing vdd_%s regs\n", __func__, voltdm->name); @@ -241,16 +237,16 @@ void omap_vp_enable(struct voltagedomain *voltdm) } /* If VP is already enabled, do nothing. Return */ - if (vdd->vp_enabled) + if (vp->enabled) return; vp_latch_vsel(voltdm); /* Enable VP */ vpconfig = voltdm->read(vp->vpconfig); - vpconfig |= vp->vp_common->vpconfig_vpenable; + vpconfig |= vp->common->vpconfig_vpenable; voltdm->write(vpconfig, vp->vpconfig); - vdd->vp_enabled = true; + vp->enabled = true; } /** @@ -262,8 +258,7 @@ void omap_vp_enable(struct voltagedomain *voltdm) */ void omap_vp_disable(struct voltagedomain *voltdm) { - struct omap_vp_instance_data *vp; - struct omap_vdd_info *vdd; + struct omap_vp_instance *vp; u32 vpconfig; int timeout; @@ -272,8 +267,7 @@ void omap_vp_disable(struct voltagedomain *voltdm) return; } - vdd = voltdm->vdd; - vp = voltdm->vdd->vp_data; + vp = voltdm->vp; if (!voltdm->read || !voltdm->write) { pr_err("%s: No read/write API for accessing vdd_%s regs\n", __func__, voltdm->name); @@ -281,7 +275,7 @@ void omap_vp_disable(struct voltagedomain *voltdm) } /* If VP is already disabled, do nothing. Return */ - if (!vdd->vp_enabled) { + if (!vp->enabled) { pr_warning("%s: Trying to disable VP for vdd_%s when" "it is already disabled\n", __func__, voltdm->name); return; @@ -289,7 +283,7 @@ void omap_vp_disable(struct voltagedomain *voltdm) /* Disable VP */ vpconfig = voltdm->read(vp->vpconfig); - vpconfig &= ~vp->vp_common->vpconfig_vpenable; + vpconfig &= ~vp->common->vpconfig_vpenable; voltdm->write(vpconfig, vp->vpconfig); /* @@ -302,7 +296,7 @@ void omap_vp_disable(struct voltagedomain *voltdm) pr_warning("%s: vdd_%s idle timedout\n", __func__, voltdm->name); - vdd->vp_enabled = false; + vp->enabled = false; return; } @@ -311,7 +305,7 @@ void omap_vp_disable(struct voltagedomain *voltdm) static int vp_volt_debug_get(void *data, u64 *val) { struct voltagedomain *voltdm = (struct voltagedomain *)data; - struct omap_vp_instance_data *vp = voltdm->vdd->vp_data; + struct omap_vp_instance *vp = voltdm->vp; struct omap_vdd_info *vdd = voltdm->vdd; u8 vsel; diff --git a/arch/arm/mach-omap2/vp.h b/arch/arm/mach-omap2/vp.h index 382fef13dbc4..b50ca91fef24 100644 --- a/arch/arm/mach-omap2/vp.h +++ b/arch/arm/mach-omap2/vp.h @@ -45,7 +45,7 @@ struct omap_vp_ops { }; /** - * struct omap_vp_common_data - register data common to all VDDs + * struct omap_vp_common - register data common to all VDDs * @vpconfig_errorgain_mask: ERRORGAIN bitmask in the PRM_VP*_CONFIG reg * @vpconfig_initvoltage_mask: INITVOLTAGE bitmask in the PRM_VP*_CONFIG reg * @vpconfig_timeouten_mask: TIMEOUT bitmask in the PRM_VP*_CONFIG reg @@ -67,7 +67,7 @@ struct omap_vp_ops { * bitfield - remove one * XXX Many of these fields are wrongly named -- e.g., vpconfig_smps* -- fix! */ -struct omap_vp_common_data { +struct omap_vp_common { u32 vpconfig_errorgain_mask; u32 vpconfig_initvoltage_mask; u32 vpconfig_timeouten; @@ -89,19 +89,20 @@ struct omap_vp_common_data { }; /** - * struct omap_vp_instance_data - VP register offsets (per-VDD) - * @vp_common: pointer to struct omap_vp_common_data * for this SoC + * struct omap_vp_instance - VP register offsets (per-VDD) + * @common: pointer to struct omap_vp_common * for this SoC * @vpconfig: PRM_VP*_CONFIG reg offset from PRM start * @vstepmin: PRM_VP*_VSTEPMIN reg offset from PRM start * @vlimitto: PRM_VP*_VLIMITTO reg offset from PRM start * @vstatus: PRM_VP*_VSTATUS reg offset from PRM start * @voltage: PRM_VP*_VOLTAGE reg offset from PRM start * @id: Unique identifier for VP instance. + * @enabled: flag to keep track of whether vp is enabled or not * * XXX vp_common is probably not needed since it is per-SoC */ -struct omap_vp_instance_data { - const struct omap_vp_common_data *vp_common; +struct omap_vp_instance { + const struct omap_vp_common *common; u8 vpconfig; u8 vstepmin; u8 vstepmax; @@ -109,6 +110,7 @@ struct omap_vp_instance_data { u8 vstatus; u8 voltage; u8 id; + bool enabled; }; /** @@ -140,12 +142,12 @@ struct omap_vp_runtime_data { u8 vlimitto_vddmax; }; -extern struct omap_vp_instance_data omap3_vp1_data; -extern struct omap_vp_instance_data omap3_vp2_data; +extern struct omap_vp_instance omap3_vp_mpu; +extern struct omap_vp_instance omap3_vp_core; -extern struct omap_vp_instance_data omap4_vp_mpu_data; -extern struct omap_vp_instance_data omap4_vp_iva_data; -extern struct omap_vp_instance_data omap4_vp_core_data; +extern struct omap_vp_instance omap4_vp_mpu; +extern struct omap_vp_instance omap4_vp_iva; +extern struct omap_vp_instance omap4_vp_core; void omap_vp_init(struct voltagedomain *voltdm); void omap_vp_enable(struct voltagedomain *voltdm); diff --git a/arch/arm/mach-omap2/vp3xxx_data.c b/arch/arm/mach-omap2/vp3xxx_data.c index b01d33325d52..79c3df94f500 100644 --- a/arch/arm/mach-omap2/vp3xxx_data.c +++ b/arch/arm/mach-omap2/vp3xxx_data.c @@ -36,7 +36,7 @@ static const struct omap_vp_ops omap3_vp_ops = { * VP data common to 34xx/36xx chips * XXX This stuff presumably belongs in the vp3xxx.c or vp.c file. */ -static const struct omap_vp_common_data omap3_vp_common = { +static const struct omap_vp_common omap3_vp_common = { .vpconfig_erroroffset_shift = OMAP3430_ERROROFFSET_SHIFT, .vpconfig_errorgain_mask = OMAP3430_ERRORGAIN_MASK, .vpconfig_errorgain_shift = OMAP3430_ERRORGAIN_SHIFT, @@ -56,9 +56,9 @@ static const struct omap_vp_common_data omap3_vp_common = { .ops = &omap3_vp_ops, }; -struct omap_vp_instance_data omap3_vp1_data = { +struct omap_vp_instance omap3_vp_mpu = { .id = OMAP3_VP_VDD_MPU_ID, - .vp_common = &omap3_vp_common, + .common = &omap3_vp_common, .vpconfig = OMAP3_PRM_VP1_CONFIG_OFFSET, .vstepmin = OMAP3_PRM_VP1_VSTEPMIN_OFFSET, .vstepmax = OMAP3_PRM_VP1_VSTEPMAX_OFFSET, @@ -67,9 +67,9 @@ struct omap_vp_instance_data omap3_vp1_data = { .voltage = OMAP3_PRM_VP1_VOLTAGE_OFFSET, }; -struct omap_vp_instance_data omap3_vp2_data = { +struct omap_vp_instance omap3_vp_core = { .id = OMAP3_VP_VDD_CORE_ID, - .vp_common = &omap3_vp_common, + .common = &omap3_vp_common, .vpconfig = OMAP3_PRM_VP2_CONFIG_OFFSET, .vstepmin = OMAP3_PRM_VP2_VSTEPMIN_OFFSET, .vstepmax = OMAP3_PRM_VP2_VSTEPMAX_OFFSET, diff --git a/arch/arm/mach-omap2/vp44xx_data.c b/arch/arm/mach-omap2/vp44xx_data.c index 9704c7ba9e99..8f75cd9e7e66 100644 --- a/arch/arm/mach-omap2/vp44xx_data.c +++ b/arch/arm/mach-omap2/vp44xx_data.c @@ -36,7 +36,7 @@ static const struct omap_vp_ops omap4_vp_ops = { * VP data common to 44xx chips * XXX This stuff presumably belongs in the vp44xx.c or vp.c file. */ -static const struct omap_vp_common_data omap4_vp_common = { +static const struct omap_vp_common omap4_vp_common = { .vpconfig_erroroffset_shift = OMAP4430_ERROROFFSET_SHIFT, .vpconfig_errorgain_mask = OMAP4430_ERRORGAIN_MASK, .vpconfig_errorgain_shift = OMAP4430_ERRORGAIN_SHIFT, @@ -56,9 +56,9 @@ static const struct omap_vp_common_data omap4_vp_common = { .ops = &omap4_vp_ops, }; -struct omap_vp_instance_data omap4_vp_mpu_data = { +struct omap_vp_instance omap4_vp_mpu = { .id = OMAP4_VP_VDD_MPU_ID, - .vp_common = &omap4_vp_common, + .common = &omap4_vp_common, .vpconfig = OMAP4_PRM_VP_MPU_CONFIG_OFFSET, .vstepmin = OMAP4_PRM_VP_MPU_VSTEPMIN_OFFSET, .vstepmax = OMAP4_PRM_VP_MPU_VSTEPMAX_OFFSET, @@ -67,9 +67,9 @@ struct omap_vp_instance_data omap4_vp_mpu_data = { .voltage = OMAP4_PRM_VP_MPU_VOLTAGE_OFFSET, }; -struct omap_vp_instance_data omap4_vp_iva_data = { +struct omap_vp_instance omap4_vp_iva = { .id = OMAP4_VP_VDD_IVA_ID, - .vp_common = &omap4_vp_common, + .common = &omap4_vp_common, .vpconfig = OMAP4_PRM_VP_IVA_CONFIG_OFFSET, .vstepmin = OMAP4_PRM_VP_IVA_VSTEPMIN_OFFSET, .vstepmax = OMAP4_PRM_VP_IVA_VSTEPMAX_OFFSET, @@ -78,9 +78,9 @@ struct omap_vp_instance_data omap4_vp_iva_data = { .voltage = OMAP4_PRM_VP_IVA_VOLTAGE_OFFSET, }; -struct omap_vp_instance_data omap4_vp_core_data = { +struct omap_vp_instance omap4_vp_core = { .id = OMAP4_VP_VDD_CORE_ID, - .vp_common = &omap4_vp_common, + .common = &omap4_vp_common, .vpconfig = OMAP4_PRM_VP_CORE_CONFIG_OFFSET, .vstepmin = OMAP4_PRM_VP_CORE_VSTEPMIN_OFFSET, .vstepmax = OMAP4_PRM_VP_CORE_VSTEPMAX_OFFSET, -- cgit v1.2.3 From 633ef8b7475a224b6be662d7c698cd705157064f Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 5 Apr 2011 14:39:11 -0700 Subject: OMAP3+: voltage: remove unneeded debugfs interface Remove read-only debugfs interface to VP values. Most of the values are init-time only and never change. Current voltage value should be retreived from the (eventual) regulator framework interface to the voltage domain. Fixes to original version provided by Nishanth Menon Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/smartreflex.c | 29 ++++++++++----- arch/arm/mach-omap2/voltage.c | 78 --------------------------------------- arch/arm/mach-omap2/voltage.h | 3 -- arch/arm/mach-omap2/vp.c | 63 ------------------------------- 4 files changed, 19 insertions(+), 154 deletions(-) diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 34c01a7de810..bb606c9709b2 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -62,6 +62,7 @@ static LIST_HEAD(sr_list); static struct omap_sr_class_data *sr_class; static struct omap_sr_pmic_data *sr_pmic_data; +static struct dentry *sr_dbg_dir; static inline void sr_write_reg(struct omap_sr *sr, unsigned offset, u32 value) { @@ -826,9 +827,10 @@ static int __init omap_sr_probe(struct platform_device *pdev) struct omap_sr *sr_info = kzalloc(sizeof(struct omap_sr), GFP_KERNEL); struct omap_sr_data *pdata = pdev->dev.platform_data; struct resource *mem, *irq; - struct dentry *vdd_dbg_dir, *nvalue_dir; + struct dentry *nvalue_dir; struct omap_volt_data *volt_data; int i, ret = 0; + char *name; if (!sr_info) { dev_err(&pdev->dev, "%s: unable to allocate sr_info\n", @@ -899,18 +901,25 @@ static int __init omap_sr_probe(struct platform_device *pdev) } dev_info(&pdev->dev, "%s: SmartReflex driver initialized\n", __func__); + if (!sr_dbg_dir) { + sr_dbg_dir = debugfs_create_dir("smartreflex", NULL); + if (!sr_dbg_dir) { + ret = PTR_ERR(sr_dbg_dir); + pr_err("%s:sr debugfs dir creation failed(%d)\n", + __func__, ret); + goto err_iounmap; + } + } - /* - * If the voltage domain debugfs directory is not created, do - * not try to create rest of the debugfs entries. - */ - vdd_dbg_dir = omap_voltage_get_dbgdir(sr_info->voltdm); - if (!vdd_dbg_dir) { - ret = -EINVAL; + name = kasprintf(GFP_KERNEL, "sr_%s", sr_info->voltdm->name); + if (!name) { + dev_err(&pdev->dev, "%s: Unable to alloc debugfs name\n", + __func__); + ret = -ENOMEM; goto err_iounmap; } - - sr_info->dbg_dir = debugfs_create_dir("smartreflex", vdd_dbg_dir); + sr_info->dbg_dir = debugfs_create_dir(name, sr_dbg_dir); + kfree(name); if (IS_ERR(sr_info->dbg_dir)) { dev_err(&pdev->dev, "%s: Unable to create debugfs directory\n", __func__); diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index c22b53c42193..eaa5f93021ae 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -43,9 +43,6 @@ static LIST_HEAD(voltdm_list); -#define VOLTAGE_DIR_SIZE 16 -static struct dentry *voltage_dir; - static int __init _config_common_vdd_data(struct voltagedomain *voltdm) { char *sys_ck_name; @@ -102,51 +99,6 @@ static int __init _config_common_vdd_data(struct voltagedomain *voltdm) return 0; } -static int nom_volt_debug_get(void *data, u64 *val) -{ - struct voltagedomain *voltdm = (struct voltagedomain *)data; - - if (!voltdm) { - pr_warning("Wrong paramater passed\n"); - return -EINVAL; - } - - *val = omap_voltage_get_nom_volt(voltdm); - - return 0; -} - -DEFINE_SIMPLE_ATTRIBUTE(nom_volt_debug_fops, nom_volt_debug_get, NULL, - "%llu\n"); -static void __init vdd_debugfs_init(struct voltagedomain *voltdm) -{ - char *name; - struct omap_vdd_info *vdd = voltdm->vdd; - - name = kzalloc(VOLTAGE_DIR_SIZE, GFP_KERNEL); - if (!name) { - pr_warning("%s: Unable to allocate memory for debugfs" - " directory name for vdd_%s", - __func__, voltdm->name); - return; - } - strcpy(name, "vdd_"); - strcat(name, voltdm->name); - - vdd->debug_dir = debugfs_create_dir(name, voltage_dir); - kfree(name); - if (IS_ERR(vdd->debug_dir)) { - pr_warning("%s: Unable to create debugfs directory for" - " vdd_%s\n", __func__, voltdm->name); - vdd->debug_dir = NULL; - return; - } - - (void) debugfs_create_file("curr_nominal_volt", S_IRUGO, - vdd->debug_dir, (void *) voltdm, - &nom_volt_debug_fops); -} - static int __init omap_vdd_data_configure(struct voltagedomain *voltdm) { int ret = -EINVAL; @@ -341,31 +293,6 @@ int omap_voltage_register_pmic(struct voltagedomain *voltdm, return 0; } -/** - * omap_voltage_get_dbgdir() - API to get pointer to the debugfs directory - * corresponding to a voltage domain. - * - * @voltdm: pointer to the VDD whose debug directory is required. - * - * This API returns pointer to the debugfs directory corresponding - * to the voltage domain. Should be used by drivers requiring to - * add any debug entry for a particular voltage domain. Returns NULL - * in case of error. - */ -struct dentry *omap_voltage_get_dbgdir(struct voltagedomain *voltdm) -{ - struct omap_vdd_info *vdd; - - if (!voltdm || IS_ERR(voltdm)) { - pr_warning("%s: VDD specified does not exist!\n", __func__); - return NULL; - } - - vdd = voltdm->vdd; - - return vdd->debug_dir; -} - /** * omap_change_voltscale_method() - API to change the voltage scaling method. * @voltdm: pointer to the VDD whose voltage scaling method @@ -418,10 +345,6 @@ int __init omap_voltage_late_init(void) return -EINVAL; } - voltage_dir = debugfs_create_dir("voltage", NULL); - if (IS_ERR(voltage_dir)) - pr_err("%s: Unable to create voltage debugfs main dir\n", - __func__); list_for_each_entry(voltdm, &voltdm_list, node) { if (!voltdm->scalable) continue; @@ -434,7 +357,6 @@ int __init omap_voltage_late_init(void) if (voltdm->vdd) { if (omap_vdd_data_configure(voltdm)) continue; - vdd_debugfs_init(voltdm); omap_vp_init(voltdm); } } diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h index 1ea735431ee0..eafcc927e873 100644 --- a/arch/arm/mach-omap2/voltage.h +++ b/arch/arm/mach-omap2/voltage.h @@ -139,14 +139,12 @@ struct omap_voltdm_pmic { * @volt_data : voltage table having the distinct voltages supported * by the domain and other associated per voltage data. * @vp_rt_data : VP data derived at runtime, not predefined - * @debug_dir : debug directory for this voltage domain. * @curr_volt : current voltage for this vdd. * @volt_scale : API to scale the voltage of the vdd. */ struct omap_vdd_info { struct omap_volt_data *volt_data; struct omap_vp_runtime_data vp_rt_data; - struct dentry *debug_dir; u32 curr_volt; int (*volt_scale) (struct voltagedomain *voltdm, @@ -161,7 +159,6 @@ void omap_voltage_get_volttable(struct voltagedomain *voltdm, struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm, unsigned long volt); unsigned long omap_voltage_get_nom_volt(struct voltagedomain *voltdm); -struct dentry *omap_voltage_get_dbgdir(struct voltagedomain *voltdm); #ifdef CONFIG_PM int omap_voltage_register_pmic(struct voltagedomain *voltdm, struct omap_voltdm_pmic *pmic); diff --git a/arch/arm/mach-omap2/vp.c b/arch/arm/mach-omap2/vp.c index 53d6018fa678..c9a315f9d3d8 100644 --- a/arch/arm/mach-omap2/vp.c +++ b/arch/arm/mach-omap2/vp.c @@ -1,6 +1,5 @@ #include #include -#include #include @@ -10,8 +9,6 @@ #include "prm-regbits-44xx.h" #include "prm44xx.h" -static void __init vp_debugfs_init(struct voltagedomain *voltdm); - static void vp_latch_vsel(struct voltagedomain *voltdm) { struct omap_vp_instance *vp = voltdm->vp; @@ -87,8 +84,6 @@ void __init omap_vp_init(struct voltagedomain *voltdm) (vdd->vp_rt_data.vlimitto_timeout << vp->common->vlimitto_timeout_shift)); voltdm->write(vp_val, vp->vlimitto); - - vp_debugfs_init(voltdm); } /* VP force update method of voltage scaling */ @@ -300,61 +295,3 @@ void omap_vp_disable(struct voltagedomain *voltdm) return; } - -/* Voltage debugfs support */ -static int vp_volt_debug_get(void *data, u64 *val) -{ - struct voltagedomain *voltdm = (struct voltagedomain *)data; - struct omap_vp_instance *vp = voltdm->vp; - struct omap_vdd_info *vdd = voltdm->vdd; - u8 vsel; - - if (!vdd) { - pr_warning("Wrong paramater passed\n"); - return -EINVAL; - } - - vsel = voltdm->read(vp->voltage); - - if (!voltdm->pmic->vsel_to_uv) { - pr_warning("PMIC function to convert vsel to voltage" - "in uV not registerd\n"); - return -EINVAL; - } - - *val = voltdm->pmic->vsel_to_uv(vsel); - return 0; -} - -DEFINE_SIMPLE_ATTRIBUTE(vp_volt_debug_fops, vp_volt_debug_get, NULL, "%llu\n"); - -static void __init vp_debugfs_init(struct voltagedomain *voltdm) -{ - struct omap_vdd_info *vdd = voltdm->vdd; - struct dentry *debug_dir; - - debug_dir = debugfs_create_dir("vp", vdd->debug_dir); - if (IS_ERR(debug_dir)) - pr_err("%s: Unable to create VP debugfs dir dir\n", __func__); - - (void) debugfs_create_x16("errorgain", S_IRUGO, debug_dir, - &(vdd->vp_rt_data.vpconfig_errorgain)); - (void) debugfs_create_x16("smpswaittimemin", S_IRUGO, - debug_dir, - &(vdd->vp_rt_data.vstepmin_smpswaittimemin)); - (void) debugfs_create_x8("stepmin", S_IRUGO, debug_dir, - &(vdd->vp_rt_data.vstepmin_stepmin)); - (void) debugfs_create_x16("smpswaittimemax", S_IRUGO, - debug_dir, - &(vdd->vp_rt_data.vstepmax_smpswaittimemax)); - (void) debugfs_create_x8("stepmax", S_IRUGO, debug_dir, - &(vdd->vp_rt_data.vstepmax_stepmax)); - (void) debugfs_create_x8("vddmax", S_IRUGO, debug_dir, - &(vdd->vp_rt_data.vlimitto_vddmax)); - (void) debugfs_create_x8("vddmin", S_IRUGO, debug_dir, - &(vdd->vp_rt_data.vlimitto_vddmin)); - (void) debugfs_create_x16("timeout", S_IRUGO, debug_dir, - &(vdd->vp_rt_data.vlimitto_timeout)); - (void) debugfs_create_file("curr_volt", S_IRUGO, debug_dir, - (void *) voltdm, &vp_volt_debug_fops); -} -- cgit v1.2.3 From 0ec3041e91cf365a76c81b224e85d3c2574fec23 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 4 Apr 2011 16:02:28 -0700 Subject: OMAP3+: VP: struct omap_vp_common: replace shift with __ffs(mask) In struct omap_vp_common, the shift value can be derived from the mask value by using __ffs(), so remove the shift value for the various VPCONFIG bitfields, and use __ffs() in the code for the shift value. While here, rename field names in kerneldoc comment to match actual field names in structure. Also, cleanup indendentaion for other VP register accesses in omap_vp_init(). No functional changes. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/vc.c | 2 +- arch/arm/mach-omap2/voltage.c | 2 +- arch/arm/mach-omap2/vp.c | 29 ++++++++++++++--------------- arch/arm/mach-omap2/vp.h | 34 ++++++++++++++-------------------- arch/arm/mach-omap2/vp3xxx_data.c | 4 +--- arch/arm/mach-omap2/vp44xx_data.c | 4 +--- 6 files changed, 32 insertions(+), 43 deletions(-) diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index e872a0369afb..7b87ea16ce43 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -149,7 +149,7 @@ int omap_vc_pre_scale(struct voltagedomain *voltdm, vdd->vp_rt_data.vpconfig_errorgain = volt_data->vp_errgain; vp_errgain_val &= voltdm->vp->common->vpconfig_errorgain_mask; vp_errgain_val |= vdd->vp_rt_data.vpconfig_errorgain << - voltdm->vp->common->vpconfig_errorgain_shift; + __ffs(voltdm->vp->common->vpconfig_errorgain_mask); voltdm->write(vp_errgain_val, voltdm->vp->vpconfig); } diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index eaa5f93021ae..5b16fd1fe373 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -82,7 +82,7 @@ static int __init _config_common_vdd_data(struct voltagedomain *voltdm) vdd->vp_rt_data.vpconfig_erroroffset = (voltdm->pmic->vp_erroroffset << - voltdm->vp->common->vpconfig_erroroffset_shift); + __ffs(voltdm->vp->common->vpconfig_erroroffset_mask)); timeout_val = (sys_clk_speed * voltdm->pmic->vp_timeout_us) / 1000; vdd->vp_rt_data.vlimitto_timeout = timeout_val; diff --git a/arch/arm/mach-omap2/vp.c b/arch/arm/mach-omap2/vp.c index c9a315f9d3d8..297d094263aa 100644 --- a/arch/arm/mach-omap2/vp.c +++ b/arch/arm/mach-omap2/vp.c @@ -34,8 +34,7 @@ static void vp_latch_vsel(struct voltagedomain *voltdm) vpconfig = voltdm->read(vp->vpconfig); vpconfig &= ~(vp->common->vpconfig_initvoltage_mask | vp->common->vpconfig_initvdd); - vpconfig |= vsel << vp->common->vpconfig_initvoltage_shift; - + vpconfig |= vsel << __ffs(vp->common->vpconfig_initvoltage_mask); voltdm->write(vpconfig, vp->vpconfig); /* Trigger initVDD value copy to voltage processor */ @@ -61,28 +60,28 @@ void __init omap_vp_init(struct voltagedomain *voltdm) vp_val = vdd->vp_rt_data.vpconfig_erroroffset | (vdd->vp_rt_data.vpconfig_errorgain << - vp->common->vpconfig_errorgain_shift) | + __ffs(vp->common->vpconfig_errorgain_mask)) | vp->common->vpconfig_timeouten; voltdm->write(vp_val, vp->vpconfig); vp_val = ((vdd->vp_rt_data.vstepmin_smpswaittimemin << - vp->common->vstepmin_smpswaittimemin_shift) | - (vdd->vp_rt_data.vstepmin_stepmin << - vp->common->vstepmin_stepmin_shift)); + vp->common->vstepmin_smpswaittimemin_shift) | + (vdd->vp_rt_data.vstepmin_stepmin << + vp->common->vstepmin_stepmin_shift)); voltdm->write(vp_val, vp->vstepmin); vp_val = ((vdd->vp_rt_data.vstepmax_smpswaittimemax << - vp->common->vstepmax_smpswaittimemax_shift) | - (vdd->vp_rt_data.vstepmax_stepmax << - vp->common->vstepmax_stepmax_shift)); + vp->common->vstepmax_smpswaittimemax_shift) | + (vdd->vp_rt_data.vstepmax_stepmax << + vp->common->vstepmax_stepmax_shift)); voltdm->write(vp_val, vp->vstepmax); vp_val = ((vdd->vp_rt_data.vlimitto_vddmax << - vp->common->vlimitto_vddmax_shift) | - (vdd->vp_rt_data.vlimitto_vddmin << - vp->common->vlimitto_vddmin_shift) | - (vdd->vp_rt_data.vlimitto_timeout << - vp->common->vlimitto_timeout_shift)); + vp->common->vlimitto_vddmax_shift) | + (vdd->vp_rt_data.vlimitto_vddmin << + vp->common->vlimitto_vddmin_shift) | + (vdd->vp_rt_data.vlimitto_timeout << + vp->common->vlimitto_timeout_shift)); voltdm->write(vp_val, vp->vlimitto); } @@ -121,7 +120,7 @@ int omap_vp_forceupdate_scale(struct voltagedomain *voltdm, vp->common->vpconfig_forceupdate | vp->common->vpconfig_initvoltage_mask); vpconfig |= ((target_vsel << - vp->common->vpconfig_initvoltage_shift)); + __ffs(vp->common->vpconfig_initvoltage_mask))); voltdm->write(vpconfig, vp->vpconfig); /* Trigger initVDD value copy to voltage processor */ diff --git a/arch/arm/mach-omap2/vp.h b/arch/arm/mach-omap2/vp.h index b50ca91fef24..1cfde5a55f9b 100644 --- a/arch/arm/mach-omap2/vp.h +++ b/arch/arm/mach-omap2/vp.h @@ -46,37 +46,32 @@ struct omap_vp_ops { /** * struct omap_vp_common - register data common to all VDDs + * @vpconfig_erroroffset_mask: ERROROFFSET bitmask in the PRM_VP*_CONFIG reg * @vpconfig_errorgain_mask: ERRORGAIN bitmask in the PRM_VP*_CONFIG reg * @vpconfig_initvoltage_mask: INITVOLTAGE bitmask in the PRM_VP*_CONFIG reg - * @vpconfig_timeouten_mask: TIMEOUT bitmask in the PRM_VP*_CONFIG reg + * @vpconfig_timeouten: TIMEOUT bitmask in the PRM_VP*_CONFIG reg * @vpconfig_initvdd: INITVDD bitmask in the PRM_VP*_CONFIG reg * @vpconfig_forceupdate: FORCEUPDATE bitmask in the PRM_VP*_CONFIG reg * @vpconfig_vpenable: VPENABLE bitmask in the PRM_VP*_CONFIG reg * @vpconfig_erroroffset_shift: ERROROFFSET field shift in PRM_VP*_CONFIG reg * @vpconfig_errorgain_shift: ERRORGAIN field shift in PRM_VP*_CONFIG reg * @vpconfig_initvoltage_shift: INITVOLTAGE field shift in PRM_VP*_CONFIG reg - * @vpconfig_stepmin_shift: VSTEPMIN field shift in the PRM_VP*_VSTEPMIN reg - * @vpconfig_smpswaittimemin_shift: SMPSWAITTIMEMIN field shift in PRM_VP*_VSTEPMIN reg - * @vpconfig_stepmax_shift: VSTEPMAX field shift in the PRM_VP*_VSTEPMAX reg - * @vpconfig_smpswaittimemax_shift: SMPSWAITTIMEMAX field shift in PRM_VP*_VSTEPMAX reg - * @vpconfig_vlimitto_vddmin_shift: VDDMIN field shift in PRM_VP*_VLIMITTO reg - * @vpconfig_vlimitto_vddmax_shift: VDDMAX field shift in PRM_VP*_VLIMITTO reg - * @vpconfig_vlimitto_timeout_shift: TIMEOUT field shift in PRM_VP*_VLIMITTO reg - * - * XXX It it not necessary to have both a mask and a shift for the same - * bitfield - remove one - * XXX Many of these fields are wrongly named -- e.g., vpconfig_smps* -- fix! + * @vstepmin_stepmin_shift: VSTEPMIN field shift in the PRM_VP*_VSTEPMIN reg + * @vstepmin_smpswaittimemin_shift: SMPSWAITTIMEMIN field shift in PRM_VP*_VSTEPMIN reg + * @vstepmax_stepmax_shift: VSTEPMAX field shift in the PRM_VP*_VSTEPMAX reg + * @vstepmax_smpswaittimemax_shift: SMPSWAITTIMEMAX field shift in PRM_VP*_VSTEPMAX reg + * @vlimitto_vddmin_shift: VDDMIN field shift in PRM_VP*_VLIMITTO reg + * @vlimitto_vddmax_shift: VDDMAX field shift in PRM_VP*_VLIMITTO reg + * @vlimitto_timeout_shift: TIMEOUT field shift in PRM_VP*_VLIMITTO reg */ struct omap_vp_common { + u32 vpconfig_erroroffset_mask; u32 vpconfig_errorgain_mask; u32 vpconfig_initvoltage_mask; - u32 vpconfig_timeouten; - u32 vpconfig_initvdd; - u32 vpconfig_forceupdate; - u32 vpconfig_vpenable; - u8 vpconfig_erroroffset_shift; - u8 vpconfig_errorgain_shift; - u8 vpconfig_initvoltage_shift; + u8 vpconfig_timeouten; + u8 vpconfig_initvdd; + u8 vpconfig_forceupdate; + u8 vpconfig_vpenable; u8 vstepmin_stepmin_shift; u8 vstepmin_smpswaittimemin_shift; u8 vstepmax_stepmax_shift; @@ -128,7 +123,6 @@ struct omap_vp_instance { * XXX Is this structure really needed? Why not just program the * device directly? They are in PRM space, therefore in the WKUP * powerdomain, so register contents should not be lost in off-mode. - * XXX Some of these fields are incorrectly named, e.g., vstep* */ struct omap_vp_runtime_data { u32 vpconfig_erroroffset; diff --git a/arch/arm/mach-omap2/vp3xxx_data.c b/arch/arm/mach-omap2/vp3xxx_data.c index 79c3df94f500..d429c447eef0 100644 --- a/arch/arm/mach-omap2/vp3xxx_data.c +++ b/arch/arm/mach-omap2/vp3xxx_data.c @@ -37,10 +37,8 @@ static const struct omap_vp_ops omap3_vp_ops = { * XXX This stuff presumably belongs in the vp3xxx.c or vp.c file. */ static const struct omap_vp_common omap3_vp_common = { - .vpconfig_erroroffset_shift = OMAP3430_ERROROFFSET_SHIFT, + .vpconfig_erroroffset_mask = OMAP3430_ERROROFFSET_MASK, .vpconfig_errorgain_mask = OMAP3430_ERRORGAIN_MASK, - .vpconfig_errorgain_shift = OMAP3430_ERRORGAIN_SHIFT, - .vpconfig_initvoltage_shift = OMAP3430_INITVOLTAGE_SHIFT, .vpconfig_initvoltage_mask = OMAP3430_INITVOLTAGE_MASK, .vpconfig_timeouten = OMAP3430_TIMEOUTEN_MASK, .vpconfig_initvdd = OMAP3430_INITVDD_MASK, diff --git a/arch/arm/mach-omap2/vp44xx_data.c b/arch/arm/mach-omap2/vp44xx_data.c index 8f75cd9e7e66..0daf2a47dc28 100644 --- a/arch/arm/mach-omap2/vp44xx_data.c +++ b/arch/arm/mach-omap2/vp44xx_data.c @@ -37,10 +37,8 @@ static const struct omap_vp_ops omap4_vp_ops = { * XXX This stuff presumably belongs in the vp44xx.c or vp.c file. */ static const struct omap_vp_common omap4_vp_common = { - .vpconfig_erroroffset_shift = OMAP4430_ERROROFFSET_SHIFT, + .vpconfig_erroroffset_mask = OMAP4430_ERROROFFSET_MASK, .vpconfig_errorgain_mask = OMAP4430_ERRORGAIN_MASK, - .vpconfig_errorgain_shift = OMAP4430_ERRORGAIN_SHIFT, - .vpconfig_initvoltage_shift = OMAP4430_INITVOLTAGE_SHIFT, .vpconfig_initvoltage_mask = OMAP4430_INITVOLTAGE_MASK, .vpconfig_timeouten = OMAP4430_TIMEOUTEN_MASK, .vpconfig_initvdd = OMAP4430_INITVDD_MASK, -- cgit v1.2.3 From 0e2f3d9cb8f3c6464ac24c489fa713699c037dd4 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 4 Apr 2011 17:22:28 -0700 Subject: OMAP3+: VP: move SoC-specific sys clock rate retreival late init Add sys clock name and rate to struct voltage domain. SoC specific voltagedomain init code initializes sys clock name. After clock framework is initialized, voltage late init will then use use the sys_clk rate to calculate the various timing that depend on that rate. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/voltage.c | 47 ++++++++++----------------- arch/arm/mach-omap2/voltage.h | 6 ++++ arch/arm/mach-omap2/voltagedomains3xxx_data.c | 8 +++++ arch/arm/mach-omap2/voltagedomains44xx_data.c | 8 +++++ 4 files changed, 39 insertions(+), 30 deletions(-) diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index 5b16fd1fe373..533ea389bb34 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -21,10 +21,10 @@ #include #include -#include #include #include #include +#include #include @@ -45,36 +45,12 @@ static LIST_HEAD(voltdm_list); static int __init _config_common_vdd_data(struct voltagedomain *voltdm) { - char *sys_ck_name; - struct clk *sys_ck; - u32 sys_clk_speed, timeout_val, waittime; struct omap_vdd_info *vdd = voltdm->vdd; + u32 sys_clk_rate, timeout_val, waittime; - /* - * XXX Clockfw should handle this, or this should be in a - * struct record - */ - if (cpu_is_omap24xx() || cpu_is_omap34xx()) - sys_ck_name = "sys_ck"; - else if (cpu_is_omap44xx()) - sys_ck_name = "sys_clkin_ck"; - else - return -EINVAL; - - /* - * Sys clk rate is require to calculate vp timeout value and - * smpswaittimemin and smpswaittimemax. - */ - sys_ck = clk_get(NULL, sys_ck_name); - if (IS_ERR(sys_ck)) { - pr_warning("%s: Could not get the sys clk to calculate" - "various vdd_%s params\n", __func__, voltdm->name); - return -EINVAL; - } - sys_clk_speed = clk_get_rate(sys_ck); - clk_put(sys_ck); /* Divide to avoid overflow */ - sys_clk_speed /= 1000; + sys_clk_rate = voltdm->sys_clk.rate / 1000; + WARN_ON(!sys_clk_rate); /* Generic voltage parameters */ vdd->volt_scale = omap_vp_forceupdate_scale; @@ -84,13 +60,13 @@ static int __init _config_common_vdd_data(struct voltagedomain *voltdm) (voltdm->pmic->vp_erroroffset << __ffs(voltdm->vp->common->vpconfig_erroroffset_mask)); - timeout_val = (sys_clk_speed * voltdm->pmic->vp_timeout_us) / 1000; + timeout_val = (sys_clk_rate * voltdm->pmic->vp_timeout_us) / 1000; vdd->vp_rt_data.vlimitto_timeout = timeout_val; vdd->vp_rt_data.vlimitto_vddmin = voltdm->pmic->vp_vddmin; vdd->vp_rt_data.vlimitto_vddmax = voltdm->pmic->vp_vddmax; waittime = ((voltdm->pmic->step_size / voltdm->pmic->slew_rate) * - sys_clk_speed) / 1000; + sys_clk_rate) / 1000; vdd->vp_rt_data.vstepmin_smpswaittimemin = waittime; vdd->vp_rt_data.vstepmax_smpswaittimemax = waittime; vdd->vp_rt_data.vstepmin_stepmin = voltdm->pmic->vp_vstepmin; @@ -346,9 +322,20 @@ int __init omap_voltage_late_init(void) } list_for_each_entry(voltdm, &voltdm_list, node) { + struct clk *sys_ck; + if (!voltdm->scalable) continue; + sys_ck = clk_get(NULL, voltdm->sys_clk.name); + if (IS_ERR(sys_ck)) { + pr_warning("%s: Could not get sys clk.\n", __func__); + return -EINVAL; + } + voltdm->sys_clk.rate = clk_get_rate(sys_ck); + WARN_ON(!voltdm->sys_clk.rate); + clk_put(sys_ck); + if (voltdm->vc) { voltdm->vdd->volt_scale = omap_vc_bypass_scale; omap_vc_init_channel(voltdm); diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h index eafcc927e873..3e163297682c 100644 --- a/arch/arm/mach-omap2/voltage.h +++ b/arch/arm/mach-omap2/voltage.h @@ -59,6 +59,7 @@ struct omap_vfsm_instance { * @read: read a VC/VP register * @write: write a VC/VP register * @read: read-modify-write a VC/VP register + * @sys_clk: system clock name/frequency, used for various timing calculations * @vdd: to be removed */ struct voltagedomain { @@ -76,6 +77,11 @@ struct voltagedomain { void (*write) (u32 val, u8 offset); u32 (*rmw)(u32 mask, u32 bits, u8 offset); + union { + const char *name; + u32 rate; + } sys_clk; + struct omap_vdd_info *vdd; }; diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c index 35117fcd55cf..7bbec7449908 100644 --- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c +++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c @@ -80,8 +80,13 @@ static struct voltagedomain *voltagedomains_omap3[] __initdata = { NULL, }; +static const char *sys_clk_name __initdata = "sys_ck"; + void __init omap3xxx_voltagedomains_init(void) { + struct voltagedomain *voltdm; + int i; + /* * XXX Will depend on the process, validation, and binning * for the currently-running IC @@ -94,5 +99,8 @@ void __init omap3xxx_voltagedomains_init(void) omap3_vdd2_info.volt_data = omap34xx_vddcore_volt_data; } + for (i = 0; voltdm = voltagedomains_omap3[i], voltdm; i++) + voltdm->sys_clk.name = sys_clk_name; + voltdm_init(voltagedomains_omap3); }; diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c b/arch/arm/mach-omap2/voltagedomains44xx_data.c index 3e7cb4e0a63a..9c20fbb41f6a 100644 --- a/arch/arm/mach-omap2/voltagedomains44xx_data.c +++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c @@ -98,8 +98,13 @@ static struct voltagedomain *voltagedomains_omap4[] __initdata = { NULL, }; +static const char *sys_clk_name __initdata = "sys_clkin_ck"; + void __init omap44xx_voltagedomains_init(void) { + struct voltagedomain *voltdm; + int i; + /* * XXX Will depend on the process, validation, and binning * for the currently-running IC @@ -108,5 +113,8 @@ void __init omap44xx_voltagedomains_init(void) omap4_vdd_iva_info.volt_data = omap44xx_vdd_iva_volt_data; omap4_vdd_core_info.volt_data = omap44xx_vdd_core_volt_data; + for (i = 0; voltdm = voltagedomains_omap4[i], voltdm; i++) + voltdm->sys_clk.name = sys_clk_name; + voltdm_init(voltagedomains_omap4); }; -- cgit v1.2.3 From 6f56727383ca3233f40af5e792a08bf07b18f5fd Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Thu, 14 Jul 2011 11:10:27 -0700 Subject: OMAP3+: VP: move timing calculation/config into VP init Move VP timing calcluation (based on sys clock) and register programming into VP init. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/voltage.c | 22 ---------------------- arch/arm/mach-omap2/vp.c | 23 ++++++++++++++++++++++- 2 files changed, 22 insertions(+), 23 deletions(-) diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index 533ea389bb34..4a15668ddcbf 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -46,31 +46,9 @@ static LIST_HEAD(voltdm_list); static int __init _config_common_vdd_data(struct voltagedomain *voltdm) { struct omap_vdd_info *vdd = voltdm->vdd; - u32 sys_clk_rate, timeout_val, waittime; - - /* Divide to avoid overflow */ - sys_clk_rate = voltdm->sys_clk.rate / 1000; - WARN_ON(!sys_clk_rate); /* Generic voltage parameters */ vdd->volt_scale = omap_vp_forceupdate_scale; - voltdm->vp->enabled = false; - - vdd->vp_rt_data.vpconfig_erroroffset = - (voltdm->pmic->vp_erroroffset << - __ffs(voltdm->vp->common->vpconfig_erroroffset_mask)); - - timeout_val = (sys_clk_rate * voltdm->pmic->vp_timeout_us) / 1000; - vdd->vp_rt_data.vlimitto_timeout = timeout_val; - vdd->vp_rt_data.vlimitto_vddmin = voltdm->pmic->vp_vddmin; - vdd->vp_rt_data.vlimitto_vddmax = voltdm->pmic->vp_vddmax; - - waittime = ((voltdm->pmic->step_size / voltdm->pmic->slew_rate) * - sys_clk_rate) / 1000; - vdd->vp_rt_data.vstepmin_smpswaittimemin = waittime; - vdd->vp_rt_data.vstepmax_smpswaittimemax = waittime; - vdd->vp_rt_data.vstepmin_stepmin = voltdm->pmic->vp_vstepmin; - vdd->vp_rt_data.vstepmax_stepmax = voltdm->pmic->vp_vstepmax; return 0; } diff --git a/arch/arm/mach-omap2/vp.c b/arch/arm/mach-omap2/vp.c index 297d094263aa..ea61a47bd199 100644 --- a/arch/arm/mach-omap2/vp.c +++ b/arch/arm/mach-omap2/vp.c @@ -50,7 +50,7 @@ void __init omap_vp_init(struct voltagedomain *voltdm) { struct omap_vp_instance *vp = voltdm->vp; struct omap_vdd_info *vdd = voltdm->vdd; - u32 vp_val; + u32 vp_val, sys_clk_rate, timeout_val, waittime; if (!voltdm->read || !voltdm->write) { pr_err("%s: No read/write API for accessing vdd_%s regs\n", @@ -58,6 +58,27 @@ void __init omap_vp_init(struct voltagedomain *voltdm) return; } + vp->enabled = false; + + /* Divide to avoid overflow */ + sys_clk_rate = voltdm->sys_clk.rate / 1000; + + vdd->vp_rt_data.vpconfig_erroroffset = + (voltdm->pmic->vp_erroroffset << + __ffs(voltdm->vp->common->vpconfig_erroroffset_mask)); + + timeout_val = (sys_clk_rate * voltdm->pmic->vp_timeout_us) / 1000; + vdd->vp_rt_data.vlimitto_timeout = timeout_val; + vdd->vp_rt_data.vlimitto_vddmin = voltdm->pmic->vp_vddmin; + vdd->vp_rt_data.vlimitto_vddmax = voltdm->pmic->vp_vddmax; + + waittime = ((voltdm->pmic->step_size / voltdm->pmic->slew_rate) * + sys_clk_rate) / 1000; + vdd->vp_rt_data.vstepmin_smpswaittimemin = waittime; + vdd->vp_rt_data.vstepmax_smpswaittimemax = waittime; + vdd->vp_rt_data.vstepmin_stepmin = voltdm->pmic->vp_vstepmin; + vdd->vp_rt_data.vstepmax_stepmax = voltdm->pmic->vp_vstepmax; + vp_val = vdd->vp_rt_data.vpconfig_erroroffset | (vdd->vp_rt_data.vpconfig_errorgain << __ffs(vp->common->vpconfig_errorgain_mask)) | -- cgit v1.2.3 From 76ea7424f80350884b4d70ae54cfa51f7f9b2a48 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 5 Apr 2011 15:15:31 -0700 Subject: OMAP3+: VP: create VP helper function for updating error gain Create new helper function in VP layer for updating VP error gain. Currently used during pre-scale for VP force update and VC bypass. TODO: determine if this can be removed from the pre-scale path and moved to VP enable path. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/vc.c | 19 ++----------------- arch/arm/mach-omap2/vp.c | 19 +++++++++++++++++++ arch/arm/mach-omap2/vp.h | 2 ++ 3 files changed, 23 insertions(+), 17 deletions(-) diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index 7b87ea16ce43..f8bdd5183e2f 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -105,9 +105,7 @@ int omap_vc_pre_scale(struct voltagedomain *voltdm, u8 *target_vsel, u8 *current_vsel) { struct omap_vc_channel *vc = voltdm->vc; - struct omap_vdd_info *vdd = voltdm->vdd; - struct omap_volt_data *volt_data; - u32 vc_cmdval, vp_errgain_val; + u32 vc_cmdval; /* Check if sufficient pmic info is available for this vdd */ if (!voltdm->pmic) { @@ -129,11 +127,6 @@ int omap_vc_pre_scale(struct voltagedomain *voltdm, return -EINVAL; } - /* Get volt_data corresponding to target_volt */ - volt_data = omap_voltage_get_voltdata(voltdm, target_volt); - if (IS_ERR(volt_data)) - volt_data = NULL; - *target_vsel = voltdm->pmic->uv_to_vsel(target_volt); *current_vsel = voltdm->pmic->uv_to_vsel(vdd->curr_volt); @@ -143,15 +136,7 @@ int omap_vc_pre_scale(struct voltagedomain *voltdm, vc_cmdval |= (*target_vsel << vc->common->cmd_on_shift); voltdm->write(vc_cmdval, vc->cmdval_reg); - /* Setting vp errorgain based on the voltage */ - if (volt_data) { - vp_errgain_val = voltdm->read(voltdm->vp->vpconfig); - vdd->vp_rt_data.vpconfig_errorgain = volt_data->vp_errgain; - vp_errgain_val &= voltdm->vp->common->vpconfig_errorgain_mask; - vp_errgain_val |= vdd->vp_rt_data.vpconfig_errorgain << - __ffs(voltdm->vp->common->vpconfig_errorgain_mask); - voltdm->write(vp_errgain_val, voltdm->vp->vpconfig); - } + omap_vp_update_errorgain(voltdm, target_volt); return 0; } diff --git a/arch/arm/mach-omap2/vp.c b/arch/arm/mach-omap2/vp.c index ea61a47bd199..f68a6db27111 100644 --- a/arch/arm/mach-omap2/vp.c +++ b/arch/arm/mach-omap2/vp.c @@ -106,6 +106,25 @@ void __init omap_vp_init(struct voltagedomain *voltdm) voltdm->write(vp_val, vp->vlimitto); } +int omap_vp_update_errorgain(struct voltagedomain *voltdm, + unsigned long target_volt) +{ + struct omap_volt_data *volt_data; + + /* Get volt_data corresponding to target_volt */ + volt_data = omap_voltage_get_voltdata(voltdm, target_volt); + if (IS_ERR(volt_data)) + return -EINVAL; + + /* Setting vp errorgain based on the voltage */ + voltdm->rmw(voltdm->vp->common->vpconfig_errorgain_mask, + volt_data->vp_errgain << + __ffs(voltdm->vp->common->vpconfig_errorgain_mask), + voltdm->vp->vpconfig); + + return 0; +} + /* VP force update method of voltage scaling */ int omap_vp_forceupdate_scale(struct voltagedomain *voltdm, unsigned long target_volt) diff --git a/arch/arm/mach-omap2/vp.h b/arch/arm/mach-omap2/vp.h index 1cfde5a55f9b..bb4c78e0c26f 100644 --- a/arch/arm/mach-omap2/vp.h +++ b/arch/arm/mach-omap2/vp.h @@ -149,5 +149,7 @@ void omap_vp_disable(struct voltagedomain *voltdm); unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm); int omap_vp_forceupdate_scale(struct voltagedomain *voltdm, unsigned long target_volt); +int omap_vp_update_errorgain(struct voltagedomain *voltdm, + unsigned long target_volt); #endif -- cgit v1.2.3 From 667216d6a435a27f5aed64aa30de583ddccc58c8 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 4 Apr 2011 17:58:21 -0700 Subject: OMAP3+: VP: remove omap_vp_runtime_data Remove the "runtime" VP data in favor of direct programming of VP registers. The VP is in the PRM, which is in the wakeup powerdomain, so there is no need to keep the state dynamically. Fixes to original version from Nishanth Menon Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/voltage.h | 2 -- arch/arm/mach-omap2/vp.c | 70 +++++++++++++++++++------------------------ arch/arm/mach-omap2/vp.h | 28 ----------------- 3 files changed, 31 insertions(+), 69 deletions(-) diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h index 3e163297682c..d14e0f487333 100644 --- a/arch/arm/mach-omap2/voltage.h +++ b/arch/arm/mach-omap2/voltage.h @@ -144,13 +144,11 @@ struct omap_voltdm_pmic { * * @volt_data : voltage table having the distinct voltages supported * by the domain and other associated per voltage data. - * @vp_rt_data : VP data derived at runtime, not predefined * @curr_volt : current voltage for this vdd. * @volt_scale : API to scale the voltage of the vdd. */ struct omap_vdd_info { struct omap_volt_data *volt_data; - struct omap_vp_runtime_data vp_rt_data; u32 curr_volt; int (*volt_scale) (struct voltagedomain *voltdm, diff --git a/arch/arm/mach-omap2/vp.c b/arch/arm/mach-omap2/vp.c index f68a6db27111..e7d38f67db87 100644 --- a/arch/arm/mach-omap2/vp.c +++ b/arch/arm/mach-omap2/vp.c @@ -49,8 +49,8 @@ static void vp_latch_vsel(struct voltagedomain *voltdm) void __init omap_vp_init(struct voltagedomain *voltdm) { struct omap_vp_instance *vp = voltdm->vp; - struct omap_vdd_info *vdd = voltdm->vdd; - u32 vp_val, sys_clk_rate, timeout_val, waittime; + u32 val, sys_clk_rate, timeout, waittime; + u32 vddmin, vddmax, vstepmin, vstepmax; if (!voltdm->read || !voltdm->write) { pr_err("%s: No read/write API for accessing vdd_%s regs\n", @@ -63,47 +63,39 @@ void __init omap_vp_init(struct voltagedomain *voltdm) /* Divide to avoid overflow */ sys_clk_rate = voltdm->sys_clk.rate / 1000; - vdd->vp_rt_data.vpconfig_erroroffset = - (voltdm->pmic->vp_erroroffset << - __ffs(voltdm->vp->common->vpconfig_erroroffset_mask)); - - timeout_val = (sys_clk_rate * voltdm->pmic->vp_timeout_us) / 1000; - vdd->vp_rt_data.vlimitto_timeout = timeout_val; - vdd->vp_rt_data.vlimitto_vddmin = voltdm->pmic->vp_vddmin; - vdd->vp_rt_data.vlimitto_vddmax = voltdm->pmic->vp_vddmax; + timeout = (sys_clk_rate * voltdm->pmic->vp_timeout_us) / 1000; + vddmin = voltdm->pmic->vp_vddmin; + vddmax = voltdm->pmic->vp_vddmax; waittime = ((voltdm->pmic->step_size / voltdm->pmic->slew_rate) * sys_clk_rate) / 1000; - vdd->vp_rt_data.vstepmin_smpswaittimemin = waittime; - vdd->vp_rt_data.vstepmax_smpswaittimemax = waittime; - vdd->vp_rt_data.vstepmin_stepmin = voltdm->pmic->vp_vstepmin; - vdd->vp_rt_data.vstepmax_stepmax = voltdm->pmic->vp_vstepmax; - - vp_val = vdd->vp_rt_data.vpconfig_erroroffset | - (vdd->vp_rt_data.vpconfig_errorgain << - __ffs(vp->common->vpconfig_errorgain_mask)) | + vstepmin = voltdm->pmic->vp_vstepmin; + vstepmax = voltdm->pmic->vp_vstepmax; + + /* + * VP_CONFIG: error gain is not set here, it will be updated + * on each scale, based on OPP. + */ + val = (voltdm->pmic->vp_erroroffset << + __ffs(voltdm->vp->common->vpconfig_erroroffset_mask)) | vp->common->vpconfig_timeouten; - voltdm->write(vp_val, vp->vpconfig); - - vp_val = ((vdd->vp_rt_data.vstepmin_smpswaittimemin << - vp->common->vstepmin_smpswaittimemin_shift) | - (vdd->vp_rt_data.vstepmin_stepmin << - vp->common->vstepmin_stepmin_shift)); - voltdm->write(vp_val, vp->vstepmin); - - vp_val = ((vdd->vp_rt_data.vstepmax_smpswaittimemax << - vp->common->vstepmax_smpswaittimemax_shift) | - (vdd->vp_rt_data.vstepmax_stepmax << - vp->common->vstepmax_stepmax_shift)); - voltdm->write(vp_val, vp->vstepmax); - - vp_val = ((vdd->vp_rt_data.vlimitto_vddmax << - vp->common->vlimitto_vddmax_shift) | - (vdd->vp_rt_data.vlimitto_vddmin << - vp->common->vlimitto_vddmin_shift) | - (vdd->vp_rt_data.vlimitto_timeout << - vp->common->vlimitto_timeout_shift)); - voltdm->write(vp_val, vp->vlimitto); + voltdm->write(val, vp->vpconfig); + + /* VSTEPMIN */ + val = (waittime << vp->common->vstepmin_smpswaittimemin_shift) | + (vstepmin << vp->common->vstepmin_stepmin_shift); + voltdm->write(val, vp->vstepmin); + + /* VSTEPMAX */ + val = (vstepmax << vp->common->vstepmax_stepmax_shift) | + (waittime << vp->common->vstepmax_smpswaittimemax_shift); + voltdm->write(val, vp->vstepmax); + + /* VLIMITTO */ + val = (vddmax << vp->common->vlimitto_vddmax_shift) | + (vddmin << vp->common->vlimitto_vddmin_shift) | + (timeout << vp->common->vlimitto_timeout_shift); + voltdm->write(val, vp->vlimitto); } int omap_vp_update_errorgain(struct voltagedomain *voltdm, diff --git a/arch/arm/mach-omap2/vp.h b/arch/arm/mach-omap2/vp.h index bb4c78e0c26f..96bbb23d2de2 100644 --- a/arch/arm/mach-omap2/vp.h +++ b/arch/arm/mach-omap2/vp.h @@ -108,34 +108,6 @@ struct omap_vp_instance { bool enabled; }; -/** - * struct omap_vp_runtime_data - VP data populated at runtime by code - * @vpconfig_erroroffset: value of ERROROFFSET bitfield in PRM_VP*_CONFIG - * @vpconfig_errorgain: value of ERRORGAIN bitfield in PRM_VP*_CONFIG - * @vstepmin_smpswaittimemin: value of SMPSWAITTIMEMIN bitfield in PRM_VP*_VSTEPMIN - * @vstepmax_smpswaittimemax: value of SMPSWAITTIMEMAX bitfield in PRM_VP*_VSTEPMAX - * @vlimitto_timeout: value of TIMEOUT bitfield in PRM_VP*_VLIMITTO - * @vstepmin_stepmin: value of VSTEPMIN bitfield in PRM_VP*_VSTEPMIN - * @vstepmax_stepmax: value of VSTEPMAX bitfield in PRM_VP*_VSTEPMAX - * @vlimitto_vddmin: value of VDDMIN bitfield in PRM_VP*_VLIMITTO - * @vlimitto_vddmax: value of VDDMAX bitfield in PRM_VP*_VLIMITTO - * - * XXX Is this structure really needed? Why not just program the - * device directly? They are in PRM space, therefore in the WKUP - * powerdomain, so register contents should not be lost in off-mode. - */ -struct omap_vp_runtime_data { - u32 vpconfig_erroroffset; - u16 vpconfig_errorgain; - u16 vstepmin_smpswaittimemin; - u16 vstepmax_smpswaittimemax; - u16 vlimitto_timeout; - u8 vstepmin_stepmin; - u8 vstepmax_stepmax; - u8 vlimitto_vddmin; - u8 vlimitto_vddmax; -}; - extern struct omap_vp_instance omap3_vp_mpu; extern struct omap_vp_instance omap3_vp_core; -- cgit v1.2.3 From 0f01565a353e06f1f1d7757b212c51e61c6fea58 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Thu, 14 Jul 2011 11:12:32 -0700 Subject: OMAP3+: VP: move voltage scale function pointer into struct voltagedomain Function pointer used for actual voltage scaling (e.g. VP force update or VC bypass) is moved from omap_vdd_info into struct voltagedomain, resulting in renames s/vdd->volt_scale/voltdm->scale/ No functional changes. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/voltage.c | 24 +++++++----------------- arch/arm/mach-omap2/voltage.h | 8 ++++---- 2 files changed, 11 insertions(+), 21 deletions(-) diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index 4a15668ddcbf..32f087316e83 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -45,10 +45,8 @@ static LIST_HEAD(voltdm_list); static int __init _config_common_vdd_data(struct voltagedomain *voltdm) { - struct omap_vdd_info *vdd = voltdm->vdd; - /* Generic voltage parameters */ - vdd->volt_scale = omap_vp_forceupdate_scale; + voltdm->scale = omap_vp_forceupdate_scale; return 0; } @@ -107,22 +105,18 @@ unsigned long omap_voltage_get_nom_volt(struct voltagedomain *voltdm) int omap_voltage_scale_vdd(struct voltagedomain *voltdm, unsigned long target_volt) { - struct omap_vdd_info *vdd; - if (!voltdm || IS_ERR(voltdm)) { pr_warning("%s: VDD specified does not exist!\n", __func__); return -EINVAL; } - vdd = voltdm->vdd; - - if (!vdd->volt_scale) { + if (!voltdm->scale) { pr_err("%s: No voltage scale API registered for vdd_%s\n", __func__, voltdm->name); return -ENODATA; } - return vdd->volt_scale(voltdm, target_volt); + return voltdm->scale(voltdm, target_volt); } /** @@ -258,23 +252,19 @@ int omap_voltage_register_pmic(struct voltagedomain *voltdm, * defined in voltage.h */ void omap_change_voltscale_method(struct voltagedomain *voltdm, - int voltscale_method) + int voltscale_method) { - struct omap_vdd_info *vdd; - if (!voltdm || IS_ERR(voltdm)) { pr_warning("%s: VDD specified does not exist!\n", __func__); return; } - vdd = voltdm->vdd; - switch (voltscale_method) { case VOLTSCALE_VPFORCEUPDATE: - vdd->volt_scale = omap_vp_forceupdate_scale; + voltdm->scale = omap_vp_forceupdate_scale; return; case VOLTSCALE_VCBYPASS: - vdd->volt_scale = omap_vc_bypass_scale; + voltdm->scale = omap_vc_bypass_scale; return; default: pr_warning("%s: Trying to change the method of voltage scaling" @@ -315,7 +305,7 @@ int __init omap_voltage_late_init(void) clk_put(sys_ck); if (voltdm->vc) { - voltdm->vdd->volt_scale = omap_vc_bypass_scale; + voltdm->scale = omap_vc_bypass_scale; omap_vc_init_channel(voltdm); } diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h index d14e0f487333..dcc7ea66f046 100644 --- a/arch/arm/mach-omap2/voltage.h +++ b/arch/arm/mach-omap2/voltage.h @@ -61,6 +61,7 @@ struct omap_vfsm_instance { * @read: read-modify-write a VC/VP register * @sys_clk: system clock name/frequency, used for various timing calculations * @vdd: to be removed + * @scale: function used to scale the voltage of the voltagedomain */ struct voltagedomain { char *name; @@ -82,6 +83,9 @@ struct voltagedomain { u32 rate; } sys_clk; + int (*scale) (struct voltagedomain *voltdm, + unsigned long target_volt); + struct omap_vdd_info *vdd; }; @@ -145,14 +149,10 @@ struct omap_voltdm_pmic { * @volt_data : voltage table having the distinct voltages supported * by the domain and other associated per voltage data. * @curr_volt : current voltage for this vdd. - * @volt_scale : API to scale the voltage of the vdd. */ struct omap_vdd_info { struct omap_volt_data *volt_data; u32 curr_volt; - - int (*volt_scale) (struct voltagedomain *voltdm, - unsigned long target_volt); }; int omap_voltage_scale_vdd(struct voltagedomain *voltdm, -- cgit v1.2.3 From bea30ed65fb2432097f362ce17042e22febcb616 Mon Sep 17 00:00:00 2001 From: Todd Poynor Date: Fri, 27 May 2011 19:15:59 -0700 Subject: OMAP: VP: Explicitly mask VPVOLTAGE field Reading the VPVOLTAGE field of PRM_VP_*_VOLTAGE registers currently relies on a u32 -> u8 conversion to mask off the FORCEUPDATEWAIT field in the upper bits. Make this explicit using the mask symbol already defined, added as a new field in struct omap_vp_common. Signed-off-by: Todd Poynor Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/vp.c | 3 ++- arch/arm/mach-omap2/vp.h | 2 ++ arch/arm/mach-omap2/vp3xxx_data.c | 2 ++ arch/arm/mach-omap2/vp44xx_data.c | 1 + 4 files changed, 7 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/vp.c b/arch/arm/mach-omap2/vp.c index e7d38f67db87..38076205312e 100644 --- a/arch/arm/mach-omap2/vp.c +++ b/arch/arm/mach-omap2/vp.c @@ -227,7 +227,8 @@ unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm) return 0; } - curr_vsel = voltdm->read(vp->voltage); + curr_vsel = (voltdm->read(vp->voltage) & vp->common->vpvoltage_mask) + >> __ffs(vp->common->vpvoltage_mask); if (!voltdm->pmic || !voltdm->pmic->vsel_to_uv) { pr_warning("%s: PMIC function to convert vsel to voltage" diff --git a/arch/arm/mach-omap2/vp.h b/arch/arm/mach-omap2/vp.h index 96bbb23d2de2..7dc5cb3cd60c 100644 --- a/arch/arm/mach-omap2/vp.h +++ b/arch/arm/mach-omap2/vp.h @@ -63,6 +63,7 @@ struct omap_vp_ops { * @vlimitto_vddmin_shift: VDDMIN field shift in PRM_VP*_VLIMITTO reg * @vlimitto_vddmax_shift: VDDMAX field shift in PRM_VP*_VLIMITTO reg * @vlimitto_timeout_shift: TIMEOUT field shift in PRM_VP*_VLIMITTO reg + * @vpvoltage_mask: VPVOLTAGE field mask in PRM_VP*_VOLTAGE reg */ struct omap_vp_common { u32 vpconfig_erroroffset_mask; @@ -79,6 +80,7 @@ struct omap_vp_common { u8 vlimitto_vddmin_shift; u8 vlimitto_vddmax_shift; u8 vlimitto_timeout_shift; + u8 vpvoltage_mask; const struct omap_vp_ops *ops; }; diff --git a/arch/arm/mach-omap2/vp3xxx_data.c b/arch/arm/mach-omap2/vp3xxx_data.c index d429c447eef0..260c554b1547 100644 --- a/arch/arm/mach-omap2/vp3xxx_data.c +++ b/arch/arm/mach-omap2/vp3xxx_data.c @@ -51,6 +51,8 @@ static const struct omap_vp_common omap3_vp_common = { .vlimitto_vddmin_shift = OMAP3430_VDDMIN_SHIFT, .vlimitto_vddmax_shift = OMAP3430_VDDMAX_SHIFT, .vlimitto_timeout_shift = OMAP3430_TIMEOUT_SHIFT, + .vpvoltage_mask = OMAP3430_VPVOLTAGE_MASK, + .ops = &omap3_vp_ops, }; diff --git a/arch/arm/mach-omap2/vp44xx_data.c b/arch/arm/mach-omap2/vp44xx_data.c index 0daf2a47dc28..b4e77044891e 100644 --- a/arch/arm/mach-omap2/vp44xx_data.c +++ b/arch/arm/mach-omap2/vp44xx_data.c @@ -51,6 +51,7 @@ static const struct omap_vp_common omap4_vp_common = { .vlimitto_vddmin_shift = OMAP4430_VDDMIN_SHIFT, .vlimitto_vddmax_shift = OMAP4430_VDDMAX_SHIFT, .vlimitto_timeout_shift = OMAP4430_TIMEOUT_SHIFT, + .vpvoltage_mask = OMAP4430_VPVOLTAGE_MASK, .ops = &omap4_vp_ops, }; -- cgit v1.2.3 From 8798c4ab56d8f726092870cb2cf15c5a7a0a93bf Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 18 Jul 2011 15:31:43 -0700 Subject: OMAP3+: VP: update_errorgain(): return error if VP Add check for valid VP in omap_vp_update_errorgain() Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/vp.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/arm/mach-omap2/vp.c b/arch/arm/mach-omap2/vp.c index 38076205312e..29698acc2aea 100644 --- a/arch/arm/mach-omap2/vp.c +++ b/arch/arm/mach-omap2/vp.c @@ -103,6 +103,9 @@ int omap_vp_update_errorgain(struct voltagedomain *voltdm, { struct omap_volt_data *volt_data; + if (!voltdm->vp) + return -EINVAL; + /* Get volt_data corresponding to target_volt */ volt_data = omap_voltage_get_voltdata(voltdm, target_volt); if (IS_ERR(volt_data)) -- cgit v1.2.3 From cc6962dbab223ae51b47c8057d39d89ac6af0d35 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Fri, 15 Jul 2011 16:38:10 -0700 Subject: OMAP3+: VP: remove unused omap_vp_get_curr_volt() Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/vp.c | 34 ---------------------------------- arch/arm/mach-omap2/vp.h | 1 - 2 files changed, 35 deletions(-) diff --git a/arch/arm/mach-omap2/vp.c b/arch/arm/mach-omap2/vp.c index 29698acc2aea..24020ea2b7e4 100644 --- a/arch/arm/mach-omap2/vp.c +++ b/arch/arm/mach-omap2/vp.c @@ -208,40 +208,6 @@ int omap_vp_forceupdate_scale(struct voltagedomain *voltdm, return 0; } -/** - * omap_vp_get_curr_volt() - API to get the current vp voltage. - * @voltdm: pointer to the VDD. - * - * This API returns the current voltage for the specified voltage processor - */ -unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm) -{ - struct omap_vp_instance *vp = voltdm->vp; - u8 curr_vsel; - - if (!voltdm || IS_ERR(voltdm)) { - pr_warning("%s: VDD specified does not exist!\n", __func__); - return 0; - } - - if (!voltdm->read) { - pr_err("%s: No read API for reading vdd_%s regs\n", - __func__, voltdm->name); - return 0; - } - - curr_vsel = (voltdm->read(vp->voltage) & vp->common->vpvoltage_mask) - >> __ffs(vp->common->vpvoltage_mask); - - if (!voltdm->pmic || !voltdm->pmic->vsel_to_uv) { - pr_warning("%s: PMIC function to convert vsel to voltage" - "in uV not registerd\n", __func__); - return 0; - } - - return voltdm->pmic->vsel_to_uv(curr_vsel); -} - /** * omap_vp_enable() - API to enable a particular VP * @voltdm: pointer to the VDD whose VP is to be enabled. diff --git a/arch/arm/mach-omap2/vp.h b/arch/arm/mach-omap2/vp.h index 7dc5cb3cd60c..7c155d248aa3 100644 --- a/arch/arm/mach-omap2/vp.h +++ b/arch/arm/mach-omap2/vp.h @@ -120,7 +120,6 @@ extern struct omap_vp_instance omap4_vp_core; void omap_vp_init(struct voltagedomain *voltdm); void omap_vp_enable(struct voltagedomain *voltdm); void omap_vp_disable(struct voltagedomain *voltdm); -unsigned long omap_vp_get_curr_volt(struct voltagedomain *voltdm); int omap_vp_forceupdate_scale(struct voltagedomain *voltdm, unsigned long target_volt); int omap_vp_update_errorgain(struct voltagedomain *voltdm, -- cgit v1.2.3 From b666b4767d3e6a23634b4d485c8511bd42d50023 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Fri, 15 Jul 2011 17:05:48 -0700 Subject: OMAP3+: VP: combine setting init voltage into common function combine VPCONFIG init voltage setup into common function and use from both vp_enable and from vp_forceupdate_scale(). NOTE: this patch changes the sequence of when the initVDD bit is cleared. The bit is now cleared immediately after it was written. Since only the rising edge of this bit has any affect according to the TRM, the exact timing of clearing of this bit should not have any effect. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/vp.c | 58 ++++++++++++++++-------------------------------- 1 file changed, 19 insertions(+), 39 deletions(-) diff --git a/arch/arm/mach-omap2/vp.c b/arch/arm/mach-omap2/vp.c index 24020ea2b7e4..66bd700a2b98 100644 --- a/arch/arm/mach-omap2/vp.c +++ b/arch/arm/mach-omap2/vp.c @@ -9,31 +9,18 @@ #include "prm-regbits-44xx.h" #include "prm44xx.h" -static void vp_latch_vsel(struct voltagedomain *voltdm) +static u32 _vp_set_init_voltage(struct voltagedomain *voltdm, u32 volt) { struct omap_vp_instance *vp = voltdm->vp; u32 vpconfig; - unsigned long uvdc; char vsel; - uvdc = omap_voltage_get_nom_volt(voltdm); - if (!uvdc) { - pr_warning("%s: unable to find current voltage for vdd_%s\n", - __func__, voltdm->name); - return; - } - - if (!voltdm->pmic || !voltdm->pmic->uv_to_vsel) { - pr_warning("%s: PMIC function to convert voltage in uV to" - " vsel not registered\n", __func__); - return; - } - - vsel = voltdm->pmic->uv_to_vsel(uvdc); + vsel = voltdm->pmic->uv_to_vsel(volt); vpconfig = voltdm->read(vp->vpconfig); vpconfig &= ~(vp->common->vpconfig_initvoltage_mask | - vp->common->vpconfig_initvdd); + vp->common->vpconfig_forceupdate | + vp->common->vpconfig_initvdd); vpconfig |= vsel << __ffs(vp->common->vpconfig_initvoltage_mask); voltdm->write(vpconfig, vp->vpconfig); @@ -43,6 +30,8 @@ static void vp_latch_vsel(struct voltagedomain *voltdm) /* Clear initVDD copy trigger bit */ voltdm->write(vpconfig, vp->vpconfig); + + return vpconfig; } /* Generic voltage init functions */ @@ -149,22 +138,11 @@ int omap_vp_forceupdate_scale(struct voltagedomain *voltdm, return -ETIMEDOUT; } - /* Configure for VP-Force Update */ - vpconfig = voltdm->read(vp->vpconfig); - vpconfig &= ~(vp->common->vpconfig_initvdd | - vp->common->vpconfig_forceupdate | - vp->common->vpconfig_initvoltage_mask); - vpconfig |= ((target_vsel << - __ffs(vp->common->vpconfig_initvoltage_mask))); - voltdm->write(vpconfig, vp->vpconfig); - - /* Trigger initVDD value copy to voltage processor */ - vpconfig |= vp->common->vpconfig_initvdd; - voltdm->write(vpconfig, vp->vpconfig); + vpconfig = _vp_set_init_voltage(voltdm, target_volt); /* Force update of voltage */ - vpconfig |= vp->common->vpconfig_forceupdate; - voltdm->write(vpconfig, vp->vpconfig); + voltdm->write(vpconfig | vp->common->vpconfig_forceupdate, + voltdm->vp->vpconfig); /* * Wait for TransactionDone. Typical latency is <200us. @@ -197,12 +175,7 @@ int omap_vp_forceupdate_scale(struct voltagedomain *voltdm, "to clear the TRANXDONE status\n", __func__, voltdm->name); - vpconfig = voltdm->read(vp->vpconfig); - /* Clear initVDD copy trigger bit */ - vpconfig &= ~vp->common->vpconfig_initvdd; - voltdm->write(vpconfig, vp->vpconfig); /* Clear force bit */ - vpconfig &= ~vp->common->vpconfig_forceupdate; voltdm->write(vpconfig, vp->vpconfig); return 0; @@ -218,7 +191,7 @@ int omap_vp_forceupdate_scale(struct voltagedomain *voltdm, void omap_vp_enable(struct voltagedomain *voltdm) { struct omap_vp_instance *vp; - u32 vpconfig; + u32 vpconfig, volt; if (!voltdm || IS_ERR(voltdm)) { pr_warning("%s: VDD specified does not exist!\n", __func__); @@ -236,12 +209,19 @@ void omap_vp_enable(struct voltagedomain *voltdm) if (vp->enabled) return; - vp_latch_vsel(voltdm); + volt = voltdm_get_voltage(voltdm); + if (!volt) { + pr_warning("%s: unable to find current voltage for %s\n", + __func__, voltdm->name); + return; + } + + vpconfig = _vp_set_init_voltage(voltdm, volt); /* Enable VP */ - vpconfig = voltdm->read(vp->vpconfig); vpconfig |= vp->common->vpconfig_vpenable; voltdm->write(vpconfig, vp->vpconfig); + vp->enabled = true; } -- cgit v1.2.3 From 5e5651be29d8bd08d0cc2bc617c43acff95e2229 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 5 Apr 2011 16:27:21 -0700 Subject: OMAP3+: voltage: rename scale and reset functions using voltdm_ prefix Rename voltage scaling related functions to use voltdm_ prefix intead of omap_voltage_, and cleanup kerneldoc comments in the process. s/omap_voltage_scale_vdd/voltdm_scale/ s/omap_voltage_reset/voltdm_reset/ Also, in voltdm_reset() s/target_uvdc/target_volt/ to be consistent with naming throughout the file. No functional changes. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/pm.c | 2 +- arch/arm/mach-omap2/smartreflex-class3.c | 2 +- arch/arm/mach-omap2/voltage.c | 29 ++++++++++++++--------------- arch/arm/mach-omap2/voltage.h | 5 ++--- 4 files changed, 18 insertions(+), 20 deletions(-) diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 1e1fedaabb55..d34fc5206b4a 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -212,7 +212,7 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name, goto exit; } - omap_voltage_scale_vdd(voltdm, bootup_volt); + voltdm_scale(voltdm, bootup_volt); return 0; exit: diff --git a/arch/arm/mach-omap2/smartreflex-class3.c b/arch/arm/mach-omap2/smartreflex-class3.c index f438cf4d847b..4eac1bc6de22 100644 --- a/arch/arm/mach-omap2/smartreflex-class3.c +++ b/arch/arm/mach-omap2/smartreflex-class3.c @@ -32,7 +32,7 @@ static int sr_class3_disable(struct voltagedomain *voltdm, int is_volt_reset) omap_vp_disable(voltdm); sr_disable(voltdm); if (is_volt_reset) - omap_voltage_reset(voltdm); + voltdm_reset(voltdm); return 0; } diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index 32f087316e83..4afb36883b25 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -94,16 +94,15 @@ unsigned long omap_voltage_get_nom_volt(struct voltagedomain *voltdm) } /** - * omap_voltage_scale_vdd() - API to scale voltage of a particular - * voltage domain. - * @voltdm: pointer to the VDD which is to be scaled. - * @target_volt: The target voltage of the voltage domain + * voltdm_scale() - API to scale voltage of a particular voltage domain. + * @voltdm: pointer to the voltage domain which is to be scaled. + * @target_volt: The target voltage of the voltage domain * * This API should be called by the kernel to do the voltage scaling - * for a particular voltage domain during dvfs or any other situation. + * for a particular voltage domain during DVFS. */ -int omap_voltage_scale_vdd(struct voltagedomain *voltdm, - unsigned long target_volt) +int voltdm_scale(struct voltagedomain *voltdm, + unsigned long target_volt) { if (!voltdm || IS_ERR(voltdm)) { pr_warning("%s: VDD specified does not exist!\n", __func__); @@ -120,31 +119,31 @@ int omap_voltage_scale_vdd(struct voltagedomain *voltdm, } /** - * omap_voltage_reset() - Resets the voltage of a particular voltage domain - * to that of the current OPP. - * @voltdm: pointer to the VDD whose voltage is to be reset. + * voltdm_reset() - Resets the voltage of a particular voltage domain + * to that of the current OPP. + * @voltdm: pointer to the voltage domain whose voltage is to be reset. * * This API finds out the correct voltage the voltage domain is supposed * to be at and resets the voltage to that level. Should be used especially * while disabling any voltage compensation modules. */ -void omap_voltage_reset(struct voltagedomain *voltdm) +void voltdm_reset(struct voltagedomain *voltdm) { - unsigned long target_uvdc; + unsigned long target_volt; if (!voltdm || IS_ERR(voltdm)) { pr_warning("%s: VDD specified does not exist!\n", __func__); return; } - target_uvdc = omap_voltage_get_nom_volt(voltdm); - if (!target_uvdc) { + target_volt = omap_voltage_get_nom_volt(voltdm); + if (!target_volt) { pr_err("%s: unable to find current voltage for vdd_%s\n", __func__, voltdm->name); return; } - omap_voltage_scale_vdd(voltdm, target_uvdc); + voltdm_scale(voltdm, target_volt); } /** diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h index dcc7ea66f046..7f8b00aff394 100644 --- a/arch/arm/mach-omap2/voltage.h +++ b/arch/arm/mach-omap2/voltage.h @@ -155,9 +155,6 @@ struct omap_vdd_info { u32 curr_volt; }; -int omap_voltage_scale_vdd(struct voltagedomain *voltdm, - unsigned long target_volt); -void omap_voltage_reset(struct voltagedomain *voltdm); void omap_voltage_get_volttable(struct voltagedomain *voltdm, struct omap_volt_data **volt_data); struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm, @@ -195,4 +192,6 @@ int voltdm_for_each(int (*fn)(struct voltagedomain *voltdm, void *user), int voltdm_for_each_pwrdm(struct voltagedomain *voltdm, int (*fn)(struct voltagedomain *voltdm, struct powerdomain *pwrdm)); +int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt); +void voltdm_reset(struct voltagedomain *voltdm); #endif -- cgit v1.2.3 From 7590f608aacba64c42edd5a8d9560264b049f403 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 5 Apr 2011 16:55:22 -0700 Subject: OMAP3+: voltage: move/rename curr_volt from vdd_info into struct voltagedomain Track current nominal voltage as part of struct voltagedomain instead of omap_vdd_info, which will soon be removed. Also renames field from curr_volt to nominal_volt. No functional changes. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/vc.c | 5 ++--- arch/arm/mach-omap2/voltage.c | 6 +----- arch/arm/mach-omap2/voltage.h | 4 ++-- 3 files changed, 5 insertions(+), 10 deletions(-) diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index f8bdd5183e2f..d9e69944f0c9 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -128,7 +128,7 @@ int omap_vc_pre_scale(struct voltagedomain *voltdm, } *target_vsel = voltdm->pmic->uv_to_vsel(target_volt); - *current_vsel = voltdm->pmic->uv_to_vsel(vdd->curr_volt); + *current_vsel = voltdm->pmic->uv_to_vsel(voltdm->nominal_volt); /* Setting the ON voltage to the new target voltage */ vc_cmdval = voltdm->read(vc->cmdval_reg); @@ -145,7 +145,6 @@ void omap_vc_post_scale(struct voltagedomain *voltdm, unsigned long target_volt, u8 target_vsel, u8 current_vsel) { - struct omap_vdd_info *vdd = voltdm->vdd; u32 smps_steps = 0, smps_delay = 0; smps_steps = abs(target_vsel - current_vsel); @@ -154,7 +153,7 @@ void omap_vc_post_scale(struct voltagedomain *voltdm, voltdm->pmic->slew_rate) + 2; udelay(smps_delay); - vdd->curr_volt = target_volt; + voltdm->nominal_volt = target_volt; } /* vc_bypass_scale - VC bypass method of voltage scaling */ diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index 4afb36883b25..1b39e68db355 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -81,16 +81,12 @@ ovdc_out: */ unsigned long omap_voltage_get_nom_volt(struct voltagedomain *voltdm) { - struct omap_vdd_info *vdd; - if (!voltdm || IS_ERR(voltdm)) { pr_warning("%s: VDD specified does not exist!\n", __func__); return 0; } - vdd = voltdm->vdd; - - return vdd->curr_volt; + return voltdm->nominal_volt; } /** diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h index 7f8b00aff394..0bd71a2910ab 100644 --- a/arch/arm/mach-omap2/voltage.h +++ b/arch/arm/mach-omap2/voltage.h @@ -62,6 +62,7 @@ struct omap_vfsm_instance { * @sys_clk: system clock name/frequency, used for various timing calculations * @vdd: to be removed * @scale: function used to scale the voltage of the voltagedomain + * @nominal_volt: current nominal voltage for this voltage domain */ struct voltagedomain { char *name; @@ -85,6 +86,7 @@ struct voltagedomain { int (*scale) (struct voltagedomain *voltdm, unsigned long target_volt); + u32 nominal_volt; struct omap_vdd_info *vdd; }; @@ -148,11 +150,9 @@ struct omap_voltdm_pmic { * * @volt_data : voltage table having the distinct voltages supported * by the domain and other associated per voltage data. - * @curr_volt : current voltage for this vdd. */ struct omap_vdd_info { struct omap_volt_data *volt_data; - u32 curr_volt; }; void omap_voltage_get_volttable(struct voltagedomain *voltdm, -- cgit v1.2.3 From e32778804930ed3141ffc55242d88e086d71ac24 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Thu, 14 Jul 2011 11:29:06 -0700 Subject: OMAP3+: voltdm: final removal of omap_vdd_info Remove last remaining member (volt_data) from omap_vdd_info into struct voltagedomain and removal remaining usage and reference to omap_vdd_info. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/voltage.c | 54 +++++---------------------- arch/arm/mach-omap2/voltage.h | 19 ++-------- arch/arm/mach-omap2/voltagedomains3xxx_data.c | 14 ++----- arch/arm/mach-omap2/voltagedomains44xx_data.c | 15 ++------ 4 files changed, 20 insertions(+), 82 deletions(-) diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index 1b39e68db355..2ba276f18159 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -43,34 +43,6 @@ static LIST_HEAD(voltdm_list); -static int __init _config_common_vdd_data(struct voltagedomain *voltdm) -{ - /* Generic voltage parameters */ - voltdm->scale = omap_vp_forceupdate_scale; - - return 0; -} - -static int __init omap_vdd_data_configure(struct voltagedomain *voltdm) -{ - int ret = -EINVAL; - - if (!voltdm->pmic) { - pr_err("%s: PMIC info requried to configure vdd_%s not" - "populated.Hence cannot initialize vdd_%s\n", - __func__, voltdm->name, voltdm->name); - goto ovdc_out; - } - - if (IS_ERR_VALUE(_config_common_vdd_data(voltdm))) - goto ovdc_out; - - ret = 0; - -ovdc_out: - return ret; -} - /* Public functions */ /** * omap_voltage_get_nom_volt() - Gets the current non-auto-compensated voltage @@ -155,18 +127,14 @@ void voltdm_reset(struct voltagedomain *voltdm) * */ void omap_voltage_get_volttable(struct voltagedomain *voltdm, - struct omap_volt_data **volt_data) + struct omap_volt_data **volt_data) { - struct omap_vdd_info *vdd; - if (!voltdm || IS_ERR(voltdm)) { pr_warning("%s: VDD specified does not exist!\n", __func__); return; } - vdd = voltdm->vdd; - - *volt_data = vdd->volt_data; + *volt_data = voltdm->volt_data; } /** @@ -185,9 +153,8 @@ void omap_voltage_get_volttable(struct voltagedomain *voltdm, * domain or if there is no matching entry. */ struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm, - unsigned long volt) + unsigned long volt) { - struct omap_vdd_info *vdd; int i; if (!voltdm || IS_ERR(voltdm)) { @@ -195,17 +162,15 @@ struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm, return ERR_PTR(-EINVAL); } - vdd = voltdm->vdd; - - if (!vdd->volt_data) { + if (!voltdm->volt_data) { pr_warning("%s: voltage table does not exist for vdd_%s\n", __func__, voltdm->name); return ERR_PTR(-ENODATA); } - for (i = 0; vdd->volt_data[i].volt_nominal != 0; i++) { - if (vdd->volt_data[i].volt_nominal == volt) - return &vdd->volt_data[i]; + for (i = 0; voltdm->volt_data[i].volt_nominal != 0; i++) { + if (voltdm->volt_data[i].volt_nominal == volt) + return &voltdm->volt_data[i]; } pr_notice("%s: Unable to match the current voltage with the voltage" @@ -304,9 +269,8 @@ int __init omap_voltage_late_init(void) omap_vc_init_channel(voltdm); } - if (voltdm->vdd) { - if (omap_vdd_data_configure(voltdm)) - continue; + if (voltdm->vp) { + voltdm->scale = omap_vp_forceupdate_scale; omap_vp_init(voltdm); } } diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h index 0bd71a2910ab..962d808346eb 100644 --- a/arch/arm/mach-omap2/voltage.h +++ b/arch/arm/mach-omap2/voltage.h @@ -33,8 +33,6 @@ struct powerdomain; #define OMAP3_VOLTOFFSET 0xff #define OMAP3_VOLTSETUP2 0xff -struct omap_vdd_info; - /** * struct omap_vfsm_instance - per-voltage manager FSM register/bitfield * data @@ -60,9 +58,10 @@ struct omap_vfsm_instance { * @write: write a VC/VP register * @read: read-modify-write a VC/VP register * @sys_clk: system clock name/frequency, used for various timing calculations - * @vdd: to be removed * @scale: function used to scale the voltage of the voltagedomain * @nominal_volt: current nominal voltage for this voltage domain + * @volt_data: voltage table having the distinct voltages supported + * by the domain and other associated per voltage data. */ struct voltagedomain { char *name; @@ -86,9 +85,9 @@ struct voltagedomain { int (*scale) (struct voltagedomain *voltdm, unsigned long target_volt); - u32 nominal_volt; - struct omap_vdd_info *vdd; + u32 nominal_volt; + struct omap_volt_data *volt_data; }; /** @@ -145,16 +144,6 @@ struct omap_voltdm_pmic { u8 (*uv_to_vsel) (unsigned long uV); }; -/** - * omap_vdd_info - Per Voltage Domain info - * - * @volt_data : voltage table having the distinct voltages supported - * by the domain and other associated per voltage data. - */ -struct omap_vdd_info { - struct omap_volt_data *volt_data; -}; - void omap_voltage_get_volttable(struct voltagedomain *voltdm, struct omap_volt_data **volt_data); struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm, diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c index 7bbec7449908..071101debbbc 100644 --- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c +++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c @@ -36,15 +36,11 @@ static const struct omap_vfsm_instance omap3_vdd1_vfsm = { .voltsetup_mask = OMAP3430_SETUP_TIME1_MASK, }; -static struct omap_vdd_info omap3_vdd1_info; - static const struct omap_vfsm_instance omap3_vdd2_vfsm = { .voltsetup_reg = OMAP3_PRM_VOLTSETUP1_OFFSET, .voltsetup_mask = OMAP3430_SETUP_TIME2_MASK, }; -static struct omap_vdd_info omap3_vdd2_info; - static struct voltagedomain omap3_voltdm_mpu = { .name = "mpu_iva", .scalable = true, @@ -54,7 +50,6 @@ static struct voltagedomain omap3_voltdm_mpu = { .vc = &omap3_vc_mpu, .vfsm = &omap3_vdd1_vfsm, .vp = &omap3_vp_mpu, - .vdd = &omap3_vdd1_info, }; static struct voltagedomain omap3_voltdm_core = { @@ -66,7 +61,6 @@ static struct voltagedomain omap3_voltdm_core = { .vc = &omap3_vc_core, .vfsm = &omap3_vdd2_vfsm, .vp = &omap3_vp_core, - .vdd = &omap3_vdd2_info, }; static struct voltagedomain omap3_voltdm_wkup = { @@ -92,11 +86,11 @@ void __init omap3xxx_voltagedomains_init(void) * for the currently-running IC */ if (cpu_is_omap3630()) { - omap3_vdd1_info.volt_data = omap36xx_vddmpu_volt_data; - omap3_vdd2_info.volt_data = omap36xx_vddcore_volt_data; + omap3_voltdm_mpu.volt_data = omap36xx_vddmpu_volt_data; + omap3_voltdm_core.volt_data = omap36xx_vddcore_volt_data; } else { - omap3_vdd1_info.volt_data = omap34xx_vddmpu_volt_data; - omap3_vdd2_info.volt_data = omap34xx_vddcore_volt_data; + omap3_voltdm_mpu.volt_data = omap34xx_vddmpu_volt_data; + omap3_voltdm_core.volt_data = omap34xx_vddcore_volt_data; } for (i = 0; voltdm = voltagedomains_omap3[i], voltdm; i++) diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c b/arch/arm/mach-omap2/voltagedomains44xx_data.c index 9c20fbb41f6a..c4584e9ac717 100644 --- a/arch/arm/mach-omap2/voltagedomains44xx_data.c +++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c @@ -36,20 +36,14 @@ static const struct omap_vfsm_instance omap4_vdd_mpu_vfsm = { .voltsetup_reg = OMAP4_PRM_VOLTSETUP_MPU_RET_SLEEP_OFFSET, }; -static struct omap_vdd_info omap4_vdd_mpu_info; - static const struct omap_vfsm_instance omap4_vdd_iva_vfsm = { .voltsetup_reg = OMAP4_PRM_VOLTSETUP_IVA_RET_SLEEP_OFFSET, }; -static struct omap_vdd_info omap4_vdd_iva_info; - static const struct omap_vfsm_instance omap4_vdd_core_vfsm = { .voltsetup_reg = OMAP4_PRM_VOLTSETUP_CORE_RET_SLEEP_OFFSET, }; -static struct omap_vdd_info omap4_vdd_core_info; - static struct voltagedomain omap4_voltdm_mpu = { .name = "mpu", .scalable = true, @@ -59,7 +53,6 @@ static struct voltagedomain omap4_voltdm_mpu = { .vc = &omap4_vc_mpu, .vfsm = &omap4_vdd_mpu_vfsm, .vp = &omap4_vp_mpu, - .vdd = &omap4_vdd_mpu_info, }; static struct voltagedomain omap4_voltdm_iva = { @@ -71,7 +64,6 @@ static struct voltagedomain omap4_voltdm_iva = { .vc = &omap4_vc_iva, .vfsm = &omap4_vdd_iva_vfsm, .vp = &omap4_vp_iva, - .vdd = &omap4_vdd_iva_info, }; static struct voltagedomain omap4_voltdm_core = { @@ -83,7 +75,6 @@ static struct voltagedomain omap4_voltdm_core = { .vc = &omap4_vc_core, .vfsm = &omap4_vdd_core_vfsm, .vp = &omap4_vp_core, - .vdd = &omap4_vdd_core_info, }; static struct voltagedomain omap4_voltdm_wkup = { @@ -109,9 +100,9 @@ void __init omap44xx_voltagedomains_init(void) * XXX Will depend on the process, validation, and binning * for the currently-running IC */ - omap4_vdd_mpu_info.volt_data = omap44xx_vdd_mpu_volt_data; - omap4_vdd_iva_info.volt_data = omap44xx_vdd_iva_volt_data; - omap4_vdd_core_info.volt_data = omap44xx_vdd_core_volt_data; + omap4_voltdm_mpu.volt_data = omap44xx_vdd_mpu_volt_data; + omap4_voltdm_iva.volt_data = omap44xx_vdd_iva_volt_data; + omap4_voltdm_core.volt_data = omap44xx_vdd_core_volt_data; for (i = 0; voltdm = voltagedomains_omap4[i], voltdm; i++) voltdm->sys_clk.name = sys_clk_name; -- cgit v1.2.3 From d5c128289f5066a7c6bf27d6ba27a6ae425be757 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Fri, 15 Jul 2011 16:05:12 -0700 Subject: OMAP3+: voltage: rename omap_voltage_get_nom_volt -> voltdm_get_voltage Use preferred voltdm_ naming for getting current nominal voltage. No functional changes. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/smartreflex-class3.c | 2 +- arch/arm/mach-omap2/voltage.c | 14 ++++++++------ arch/arm/mach-omap2/voltage.h | 2 +- 3 files changed, 10 insertions(+), 8 deletions(-) diff --git a/arch/arm/mach-omap2/smartreflex-class3.c b/arch/arm/mach-omap2/smartreflex-class3.c index 4eac1bc6de22..53d9d0a5b39d 100644 --- a/arch/arm/mach-omap2/smartreflex-class3.c +++ b/arch/arm/mach-omap2/smartreflex-class3.c @@ -15,7 +15,7 @@ static int sr_class3_enable(struct voltagedomain *voltdm) { - unsigned long volt = omap_voltage_get_nom_volt(voltdm); + unsigned long volt = voltdm_get_voltage(voltdm); if (!volt) { pr_warning("%s: Curr voltage unknown. Cannot enable sr_%s\n", diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index 2ba276f18159..441c2d98008c 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -45,13 +45,13 @@ static LIST_HEAD(voltdm_list); /* Public functions */ /** - * omap_voltage_get_nom_volt() - Gets the current non-auto-compensated voltage - * @voltdm: pointer to the VDD for which current voltage info is needed + * voltdm_get_voltage() - Gets the current non-auto-compensated voltage + * @voltdm: pointer to the voltdm for which current voltage info is needed * - * API to get the current non-auto-compensated voltage for a VDD. - * Returns 0 in case of error else returns the current voltage for the VDD. + * API to get the current non-auto-compensated voltage for a voltage domain. + * Returns 0 in case of error else returns the current voltage. */ -unsigned long omap_voltage_get_nom_volt(struct voltagedomain *voltdm) +unsigned long voltdm_get_voltage(struct voltagedomain *voltdm) { if (!voltdm || IS_ERR(voltdm)) { pr_warning("%s: VDD specified does not exist!\n", __func__); @@ -72,6 +72,8 @@ unsigned long omap_voltage_get_nom_volt(struct voltagedomain *voltdm) int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt) { + int ret; + if (!voltdm || IS_ERR(voltdm)) { pr_warning("%s: VDD specified does not exist!\n", __func__); return -EINVAL; @@ -104,7 +106,7 @@ void voltdm_reset(struct voltagedomain *voltdm) return; } - target_volt = omap_voltage_get_nom_volt(voltdm); + target_volt = voltdm_get_voltage(voltdm); if (!target_volt) { pr_err("%s: unable to find current voltage for vdd_%s\n", __func__, voltdm->name); diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h index 962d808346eb..4c0980941991 100644 --- a/arch/arm/mach-omap2/voltage.h +++ b/arch/arm/mach-omap2/voltage.h @@ -148,7 +148,6 @@ void omap_voltage_get_volttable(struct voltagedomain *voltdm, struct omap_volt_data **volt_data); struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm, unsigned long volt); -unsigned long omap_voltage_get_nom_volt(struct voltagedomain *voltdm); #ifdef CONFIG_PM int omap_voltage_register_pmic(struct voltagedomain *voltdm, struct omap_voltdm_pmic *pmic); @@ -183,4 +182,5 @@ int voltdm_for_each_pwrdm(struct voltagedomain *voltdm, struct powerdomain *pwrdm)); int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt); void voltdm_reset(struct voltagedomain *voltdm); +unsigned long voltdm_get_voltage(struct voltagedomain *voltdm); #endif -- cgit v1.2.3 From 6a62b78d9aa6661cae1a7d30b574daf435a14c47 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 18 Jul 2011 16:24:17 -0700 Subject: OMAP3+: voltage: update nominal voltage in voltdm_scale() not VC post-scale Currently, the nominal voltage is updated in the VC post-scale function which is common to both scaling methods. However, this has readabiliy problems as this update is not where it might be expected. Instead, move the updated into voltdm_scale() upon a successful return of voltdm->scale() Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/vc.c | 2 -- arch/arm/mach-omap2/voltage.c | 6 +++++- 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index d9e69944f0c9..6e586767a904 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -152,8 +152,6 @@ void omap_vc_post_scale(struct voltagedomain *voltdm, smps_delay = ((smps_steps * voltdm->pmic->step_size) / voltdm->pmic->slew_rate) + 2; udelay(smps_delay); - - voltdm->nominal_volt = target_volt; } /* vc_bypass_scale - VC bypass method of voltage scaling */ diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index 441c2d98008c..64070ac1e761 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -85,7 +85,11 @@ int voltdm_scale(struct voltagedomain *voltdm, return -ENODATA; } - return voltdm->scale(voltdm, target_volt); + ret = voltdm->scale(voltdm, target_volt); + if (!ret) + voltdm->nominal_volt = target_volt; + + return ret; } /** -- cgit v1.2.3 From 5876c940c0dee298e38fbf47ce67c9e220b0572c Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 20 Jul 2011 16:35:46 -0700 Subject: OMAP2+: VC: more registers are per-channel starting with OMAP5 Starting with OMAP5, the following registers are per-channel and not common to a all VC channels: - SMPS I2C slave address - SMPS voltage register address offset - SMPS cmd/value register address offset - VC channel configuration register Move these from the channel-common struct into the per-channel struct to support OMAP5. Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/vc.c | 8 ++++---- arch/arm/mach-omap2/vc.h | 16 ++++++++-------- arch/arm/mach-omap2/vc3xxx_data.c | 12 ++++++++---- arch/arm/mach-omap2/vc44xx_data.c | 16 ++++++++++++---- 4 files changed, 32 insertions(+), 20 deletions(-) diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c index 6e586767a904..031d116fbf10 100644 --- a/arch/arm/mach-omap2/vc.c +++ b/arch/arm/mach-omap2/vc.c @@ -94,7 +94,7 @@ static int omap_vc_config_channel(struct voltagedomain *voltdm) voltdm->rmw(CFG_CHANNEL_MASK << vc->cfg_channel_sa_shift, vc->cfg_channel << vc->cfg_channel_sa_shift, - vc->common->cfg_channel_reg); + vc->cfg_channel_reg); return 0; } @@ -319,7 +319,7 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm) /* Configure the i2c slave address for this VC */ voltdm->rmw(vc->smps_sa_mask, vc->i2c_slave_addr << __ffs(vc->smps_sa_mask), - vc->common->smps_sa_reg); + vc->smps_sa_reg); vc->cfg_channel |= vc_cfg_bits->sa; /* @@ -327,13 +327,13 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm) */ voltdm->rmw(vc->smps_volra_mask, vc->volt_reg_addr << __ffs(vc->smps_volra_mask), - vc->common->smps_volra_reg); + vc->smps_volra_reg); vc->cfg_channel |= vc_cfg_bits->rav; if (vc->cmd_reg_addr) { voltdm->rmw(vc->smps_cmdra_mask, vc->cmd_reg_addr << __ffs(vc->smps_cmdra_mask), - vc->common->smps_cmdra_reg); + vc->smps_cmdra_reg); vc->cfg_channel |= vc_cfg_bits->rac | vc_cfg_bits->racen; } diff --git a/arch/arm/mach-omap2/vc.h b/arch/arm/mach-omap2/vc.h index 7ed70e07becf..478bf6b432c4 100644 --- a/arch/arm/mach-omap2/vc.h +++ b/arch/arm/mach-omap2/vc.h @@ -25,9 +25,6 @@ struct voltagedomain; * struct omap_vc_common - per-VC register/bitfield data * @cmd_on_mask: ON bitmask in PRM_VC_CMD_VAL* register * @valid: VALID bitmask in PRM_VC_BYPASS_VAL register - * @smps_sa_reg: Offset of PRM_VC_SMPS_SA reg from PRM start - * @smps_volra_reg: Offset of PRM_VC_SMPS_VOL_RA reg from PRM start - * @smps_cmdra_reg: Offset of PRM_VC_SMPS_CMD_RA reg from PRM start * @bypass_val_reg: Offset of PRM_VC_BYPASS_VAL reg from PRM start * @data_shift: DATA field shift in PRM_VC_BYPASS_VAL register * @slaveaddr_shift: SLAVEADDR field shift in PRM_VC_BYPASS_VAL register @@ -36,7 +33,6 @@ struct voltagedomain; * @cmd_onlp_shift: ONLP field shift in PRM_VC_CMD_VAL_* register * @cmd_ret_shift: RET field shift in PRM_VC_CMD_VAL_* register * @cmd_off_shift: OFF field shift in PRM_VC_CMD_VAL_* register - * @cfg_channel_reg: VC channel configuration register * @i2c_cfg_reg: I2C configuration register offset * @i2c_cfg_hsen_mask: high-speed mode bit field mask in I2C config register * @i2c_mcode_mask: MCODE field mask for I2C config register @@ -47,9 +43,6 @@ struct voltagedomain; struct omap_vc_common { u32 cmd_on_mask; u32 valid; - u8 smps_sa_reg; - u8 smps_volra_reg; - u8 smps_cmdra_reg; u8 bypass_val_reg; u8 data_shift; u8 slaveaddr_shift; @@ -58,7 +51,6 @@ struct omap_vc_common { u8 cmd_onlp_shift; u8 cmd_ret_shift; u8 cmd_off_shift; - u8 cfg_channel_reg; u8 i2c_cfg_reg; u8 i2c_cfg_hsen_mask; u8 i2c_mcode_mask; @@ -82,6 +74,10 @@ struct omap_vc_common { * @smps_volra_mask: VOLRA* bitmask in the PRM_VC_VOL_RA register * @smps_cmdra_mask: CMDRA* bitmask in the PRM_VC_CMD_RA register * @cmdval_reg: register for on/ret/off voltage level values for this channel + * @smps_sa_reg: Offset of PRM_VC_SMPS_SA reg from PRM start + * @smps_volra_reg: Offset of PRM_VC_SMPS_VOL_RA reg from PRM start + * @smps_cmdra_reg: Offset of PRM_VC_SMPS_CMD_RA reg from PRM start + * @cfg_channel_reg: VC channel configuration register * @cfg_channel_sa_shift: bit shift for slave address cfg_channel register * @flags: VC channel-specific flags (optional) */ @@ -100,6 +96,10 @@ struct omap_vc_channel { u32 smps_volra_mask; u32 smps_cmdra_mask; u8 cmdval_reg; + u8 smps_sa_reg; + u8 smps_volra_reg; + u8 smps_cmdra_reg; + u8 cfg_channel_reg; u8 cfg_channel_sa_shift; u8 flags; }; diff --git a/arch/arm/mach-omap2/vc3xxx_data.c b/arch/arm/mach-omap2/vc3xxx_data.c index 95d7701300cb..cfe348e1af0e 100644 --- a/arch/arm/mach-omap2/vc3xxx_data.c +++ b/arch/arm/mach-omap2/vc3xxx_data.c @@ -30,9 +30,6 @@ * XXX This stuff presumably belongs in the vc3xxx.c or vc.c file. */ static struct omap_vc_common omap3_vc_common = { - .smps_sa_reg = OMAP3_PRM_VC_SMPS_SA_OFFSET, - .smps_volra_reg = OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET, - .smps_cmdra_reg = OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET, .bypass_val_reg = OMAP3_PRM_VC_BYPASS_VAL_OFFSET, .data_shift = OMAP3430_DATA_SHIFT, .slaveaddr_shift = OMAP3430_SLAVEADDR_SHIFT, @@ -43,7 +40,6 @@ static struct omap_vc_common omap3_vc_common = { .cmd_onlp_shift = OMAP3430_VC_CMD_ONLP_SHIFT, .cmd_ret_shift = OMAP3430_VC_CMD_RET_SHIFT, .cmd_off_shift = OMAP3430_VC_CMD_OFF_SHIFT, - .cfg_channel_reg = OMAP3_PRM_VC_CH_CONF_OFFSET, .i2c_cfg_hsen_mask = OMAP3430_HSEN_MASK, .i2c_cfg_reg = OMAP3_PRM_VC_I2C_CFG_OFFSET, .i2c_mcode_mask = OMAP3430_MCODE_MASK, @@ -51,6 +47,10 @@ static struct omap_vc_common omap3_vc_common = { struct omap_vc_channel omap3_vc_mpu = { .common = &omap3_vc_common, + .smps_sa_reg = OMAP3_PRM_VC_SMPS_SA_OFFSET, + .smps_volra_reg = OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET, + .smps_cmdra_reg = OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET, + .cfg_channel_reg = OMAP3_PRM_VC_CH_CONF_OFFSET, .cmdval_reg = OMAP3_PRM_VC_CMD_VAL_0_OFFSET, .smps_sa_mask = OMAP3430_PRM_VC_SMPS_SA_SA0_MASK, .smps_volra_mask = OMAP3430_VOLRA0_MASK, @@ -60,6 +60,10 @@ struct omap_vc_channel omap3_vc_mpu = { struct omap_vc_channel omap3_vc_core = { .common = &omap3_vc_common, + .smps_sa_reg = OMAP3_PRM_VC_SMPS_SA_OFFSET, + .smps_volra_reg = OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET, + .smps_cmdra_reg = OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET, + .cfg_channel_reg = OMAP3_PRM_VC_CH_CONF_OFFSET, .cmdval_reg = OMAP3_PRM_VC_CMD_VAL_1_OFFSET, .smps_sa_mask = OMAP3430_PRM_VC_SMPS_SA_SA1_MASK, .smps_volra_mask = OMAP3430_VOLRA1_MASK, diff --git a/arch/arm/mach-omap2/vc44xx_data.c b/arch/arm/mach-omap2/vc44xx_data.c index 0a4fc37877cc..2740a968145e 100644 --- a/arch/arm/mach-omap2/vc44xx_data.c +++ b/arch/arm/mach-omap2/vc44xx_data.c @@ -31,9 +31,6 @@ * XXX This stuff presumably belongs in the vc3xxx.c or vc.c file. */ static const struct omap_vc_common omap4_vc_common = { - .smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET, - .smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET, - .smps_cmdra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_CMD_OFFSET, .bypass_val_reg = OMAP4_PRM_VC_VAL_BYPASS_OFFSET, .data_shift = OMAP4430_DATA_SHIFT, .slaveaddr_shift = OMAP4430_SLAVEADDR_SHIFT, @@ -44,7 +41,6 @@ static const struct omap_vc_common omap4_vc_common = { .cmd_onlp_shift = OMAP4430_ONLP_SHIFT, .cmd_ret_shift = OMAP4430_RET_SHIFT, .cmd_off_shift = OMAP4430_OFF_SHIFT, - .cfg_channel_reg = OMAP4_PRM_VC_CFG_CHANNEL_OFFSET, .i2c_cfg_reg = OMAP4_PRM_VC_CFG_I2C_MODE_OFFSET, .i2c_cfg_hsen_mask = OMAP4430_HSMODEEN_MASK, .i2c_mcode_mask = OMAP4430_HSMCODE_MASK, @@ -54,6 +50,10 @@ static const struct omap_vc_common omap4_vc_common = { struct omap_vc_channel omap4_vc_mpu = { .flags = OMAP_VC_CHANNEL_DEFAULT | OMAP_VC_CHANNEL_CFG_MUTANT, .common = &omap4_vc_common, + .smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET, + .smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET, + .smps_cmdra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_CMD_OFFSET, + .cfg_channel_reg = OMAP4_PRM_VC_CFG_CHANNEL_OFFSET, .cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_MPU_L_OFFSET, .smps_sa_mask = OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_MASK, .smps_volra_mask = OMAP4430_VOLRA_VDD_MPU_L_MASK, @@ -63,6 +63,10 @@ struct omap_vc_channel omap4_vc_mpu = { struct omap_vc_channel omap4_vc_iva = { .common = &omap4_vc_common, + .smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET, + .smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET, + .smps_cmdra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_CMD_OFFSET, + .cfg_channel_reg = OMAP4_PRM_VC_CFG_CHANNEL_OFFSET, .cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_IVA_L_OFFSET, .smps_sa_mask = OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_MASK, .smps_volra_mask = OMAP4430_VOLRA_VDD_IVA_L_MASK, @@ -72,6 +76,10 @@ struct omap_vc_channel omap4_vc_iva = { struct omap_vc_channel omap4_vc_core = { .common = &omap4_vc_common, + .smps_sa_reg = OMAP4_PRM_VC_SMPS_SA_OFFSET, + .smps_volra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_VOL_OFFSET, + .smps_cmdra_reg = OMAP4_PRM_VC_VAL_SMPS_RA_CMD_OFFSET, + .cfg_channel_reg = OMAP4_PRM_VC_CFG_CHANNEL_OFFSET, .cmdval_reg = OMAP4_PRM_VC_VAL_CMD_VDD_CORE_L_OFFSET, .smps_sa_mask = OMAP4430_SA_VDD_CORE_L_0_6_MASK, .smps_volra_mask = OMAP4430_VOLRA_VDD_CORE_L_MASK, -- cgit v1.2.3 From 42b43945e0f115412dd0b7f0c3609a8b6f24f5e5 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Thu, 28 Jul 2011 14:48:56 +0300 Subject: omap: voltage: add a stub header file for external/regulator use Needed as some of the voltage layer functionality is accessed from the SMPS regulator driver. Signed-off-by: Tero Kristo Signed-off-by: Kevin Hilman --- arch/arm/plat-omap/include/plat/voltage.h | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) create mode 100644 arch/arm/plat-omap/include/plat/voltage.h diff --git a/arch/arm/plat-omap/include/plat/voltage.h b/arch/arm/plat-omap/include/plat/voltage.h new file mode 100644 index 000000000000..0a6a482ec014 --- /dev/null +++ b/arch/arm/plat-omap/include/plat/voltage.h @@ -0,0 +1,20 @@ +/* + * OMAP Voltage Management Routines + * + * Copyright (C) 2011, Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_OMAP_VOLTAGE_H +#define __ARCH_ARM_OMAP_VOLTAGE_H + +struct voltagedomain; + +struct voltagedomain *voltdm_lookup(const char *name); +int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt); +unsigned long voltdm_get_voltage(struct voltagedomain *voltdm); + +#endif -- cgit v1.2.3 From 58e241f7be8dfbb19fa8f5bf8b2e56bb6d655752 Mon Sep 17 00:00:00 2001 From: Patrick Titiano Date: Wed, 18 May 2011 00:17:30 -0500 Subject: OMAP4: PM: TWL6030: fix voltage conversion formula omap_twl_vsel_to_uv() and omap_twl_uv_to_vsel() functions used to convert voltages to TWL6030 SMPS commands (a.k.a "vsel") implement incorrect conversion formula. It uses legacy OMAP3 formula, but OMAP4 Power IC has different offset and voltage step: - Voltage Step is now 12.66mV (instead of 12.5mV) - Offset is either 607.7mV or 709mV depending on TWL6030 chip revision (instead of 600mV) This leads to setting voltages potentially higher than expected, and so potentially some (limited) power overconsumption. For reference, see formula and tables in section 8.5.2.3 "Output Voltage Selection (Standard Mode / Extended Mode with or without offset)" in TWL6030 functional specifications document. [nm@ti.com: ported to voltdm_c] Signed-off-by: Nishanth Menon Signed-off-by: Patrick Titiano --- arch/arm/mach-omap2/omap_twl.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c index 6b247d183299..a66bf6b9fb05 100644 --- a/arch/arm/mach-omap2/omap_twl.c +++ b/arch/arm/mach-omap2/omap_twl.c @@ -106,9 +106,9 @@ static unsigned long twl6030_vsel_to_uv(const u8 vsel) return 1350000; if (smps_offset & 0x8) - return ((((vsel - 1) * 125) + 7000)) * 100; + return ((((vsel - 1) * 1266) + 70900)) * 10; else - return ((((vsel - 1) * 125) + 6000)) * 100; + return ((((vsel - 1) * 1266) + 60770)) * 10; } static u8 twl6030_uv_to_vsel(unsigned long uv) @@ -138,9 +138,9 @@ static u8 twl6030_uv_to_vsel(unsigned long uv) return 0x3A; if (smps_offset & 0x8) - return DIV_ROUND_UP(uv - 700000, 12500) + 1; + return DIV_ROUND_UP(uv - 709000, 12660) + 1; else - return DIV_ROUND_UP(uv - 600000, 12500) + 1; + return DIV_ROUND_UP(uv - 607700, 12660) + 1; } static struct omap_voltdm_pmic omap3_mpu_pmic = { @@ -187,7 +187,7 @@ static struct omap_voltdm_pmic omap3_core_pmic = { static struct omap_voltdm_pmic omap4_mpu_pmic = { .slew_rate = 4000, - .step_size = 12500, + .step_size = 12660, .on_volt = 1350000, .onlp_volt = 1350000, .ret_volt = 837500, @@ -208,7 +208,7 @@ static struct omap_voltdm_pmic omap4_mpu_pmic = { static struct omap_voltdm_pmic omap4_iva_pmic = { .slew_rate = 4000, - .step_size = 12500, + .step_size = 12660, .on_volt = 1100000, .onlp_volt = 1100000, .ret_volt = 837500, @@ -229,7 +229,7 @@ static struct omap_voltdm_pmic omap4_iva_pmic = { static struct omap_voltdm_pmic omap4_core_pmic = { .slew_rate = 4000, - .step_size = 12500, + .step_size = 12660, .on_volt = 1100000, .onlp_volt = 1100000, .ret_volt = 837500, -- cgit v1.2.3 From 366494250b60af14fbab4d94d6bb1d1b6d17f10b Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Wed, 18 May 2011 00:17:31 -0500 Subject: OMAP4: PM: TWL6030: fix uv to voltage for >0x39 using 1.35V as a check is not correct, we know that beyond 0x39, voltages are non linear - hence use the conversion iff uV greater than that for 0x39. For example, with 709mV as the smps offset, the max linear is actually 1.41V(0x39vsel)! Signed-off-by: Nishanth Menon --- arch/arm/mach-omap2/omap_twl.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c index a66bf6b9fb05..5def7c274f75 100644 --- a/arch/arm/mach-omap2/omap_twl.c +++ b/arch/arm/mach-omap2/omap_twl.c @@ -134,8 +134,13 @@ static u8 twl6030_uv_to_vsel(unsigned long uv) * hardcoding only for 1.35 V which is used for 1GH OPP for * OMAP4430. */ - if (uv == 1350000) + if (uv > twl6030_vsel_to_uv(0x39)) { + if (uv == 1350000) + return 0x3A; + pr_err("%s:OUT OF RANGE! non mapped vsel for %ld Vs max %ld\n", + __func__, uv, twl6030_vsel_to_uv(0x39)); return 0x3A; + } if (smps_offset & 0x8) return DIV_ROUND_UP(uv - 709000, 12660) + 1; -- cgit v1.2.3 From 2aed5b9e8877237886453f138be7ecea224b32b0 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Wed, 18 May 2011 00:17:32 -0500 Subject: OMAP4: PM: TWL6030: address 0V conversions 0V conversions should be mapped to 0 as it is meant to denote off voltages. Signed-off-by: Nishanth Menon --- arch/arm/mach-omap2/omap_twl.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c index 5def7c274f75..b30adf349b73 100644 --- a/arch/arm/mach-omap2/omap_twl.c +++ b/arch/arm/mach-omap2/omap_twl.c @@ -95,6 +95,8 @@ static unsigned long twl6030_vsel_to_uv(const u8 vsel) is_offset_valid = true; } + if (!vsel) + return 0; /* * There is no specific formula for voltage to vsel * conversion above 1.3V. There are special hardcoded @@ -127,6 +129,8 @@ static u8 twl6030_uv_to_vsel(unsigned long uv) is_offset_valid = true; } + if (!uv) + return 0x00; /* * There is no specific formula for voltage to vsel * conversion above 1.3V. There are special hardcoded -- cgit v1.2.3 From 63f60a43e640c2f56be902c69503ea28d1010416 Mon Sep 17 00:00:00 2001 From: Patrick Titiano Date: Wed, 18 May 2011 00:17:33 -0500 Subject: OMAP4: PM: TWL6030: fix ON/RET/OFF voltages According to latest OMAP4430 Data Manual v0.4 dated March 2011: - Retention voltage shall be set to 0.83V. See tables 2.2, 2.4 and 2.6 in DM. This allows saving a little more power in retention states. - OPP100 IVA nominal voltage is 1.188V. See table 2.4 in DM. This allows saving a little power when CPU wakes up until Smart-Reflex is not yet resumed. [nm@ti.com: ported to voltdm_c] Signed-off-by: Nishanth Menon Signed-off-by: Patrick Titiano --- arch/arm/mach-omap2/omap_twl.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c index b30adf349b73..4bc99fb0b81f 100644 --- a/arch/arm/mach-omap2/omap_twl.c +++ b/arch/arm/mach-omap2/omap_twl.c @@ -197,10 +197,10 @@ static struct omap_voltdm_pmic omap3_core_pmic = { static struct omap_voltdm_pmic omap4_mpu_pmic = { .slew_rate = 4000, .step_size = 12660, - .on_volt = 1350000, - .onlp_volt = 1350000, - .ret_volt = 837500, - .off_volt = 600000, + .on_volt = 1375000, + .onlp_volt = 1375000, + .ret_volt = 830000, + .off_volt = 0, .volt_setup_time = 0, .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, @@ -218,10 +218,10 @@ static struct omap_voltdm_pmic omap4_mpu_pmic = { static struct omap_voltdm_pmic omap4_iva_pmic = { .slew_rate = 4000, .step_size = 12660, - .on_volt = 1100000, - .onlp_volt = 1100000, - .ret_volt = 837500, - .off_volt = 600000, + .on_volt = 1188000, + .onlp_volt = 1188000, + .ret_volt = 830000, + .off_volt = 0, .volt_setup_time = 0, .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, @@ -239,10 +239,10 @@ static struct omap_voltdm_pmic omap4_iva_pmic = { static struct omap_voltdm_pmic omap4_core_pmic = { .slew_rate = 4000, .step_size = 12660, - .on_volt = 1100000, - .onlp_volt = 1100000, - .ret_volt = 837500, - .off_volt = 600000, + .on_volt = 1200000, + .onlp_volt = 1200000, + .ret_volt = 830000, + .off_volt = 0, .volt_setup_time = 0, .vp_erroroffset = OMAP4_VP_CONFIG_ERROROFFSET, .vp_vstepmin = OMAP4_VP_VSTEPMIN_VSTEPMIN, -- cgit v1.2.3 From ee7fbba63e334481049a7939b8071160824447d3 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Wed, 18 May 2011 00:17:34 -0500 Subject: OMAP4: PM: TWL6030: add cmd register Without the command register, ON/ONLP/RET/OFF voltages are useless. and TWL will be unable to use these Signed-off-by: Nishanth Menon --- arch/arm/mach-omap2/omap_twl.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c index 4bc99fb0b81f..f515a1a056d5 100644 --- a/arch/arm/mach-omap2/omap_twl.c +++ b/arch/arm/mach-omap2/omap_twl.c @@ -42,8 +42,11 @@ #define OMAP4_SRI2C_SLAVE_ADDR 0x12 #define OMAP4_VDD_MPU_SR_VOLT_REG 0x55 +#define OMAP4_VDD_MPU_SR_CMD_REG 0x56 #define OMAP4_VDD_IVA_SR_VOLT_REG 0x5B +#define OMAP4_VDD_IVA_SR_CMD_REG 0x5C #define OMAP4_VDD_CORE_SR_VOLT_REG 0x61 +#define OMAP4_VDD_CORE_SR_CMD_REG 0x62 #define OMAP4_VP_CONFIG_ERROROFFSET 0x00 #define OMAP4_VP_VSTEPMIN_VSTEPMIN 0x01 @@ -210,6 +213,7 @@ static struct omap_voltdm_pmic omap4_mpu_pmic = { .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, .i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR, .volt_reg_addr = OMAP4_VDD_MPU_SR_VOLT_REG, + .cmd_reg_addr = OMAP4_VDD_MPU_SR_CMD_REG, .i2c_high_speed = true, .vsel_to_uv = twl6030_vsel_to_uv, .uv_to_vsel = twl6030_uv_to_vsel, @@ -231,6 +235,7 @@ static struct omap_voltdm_pmic omap4_iva_pmic = { .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, .i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR, .volt_reg_addr = OMAP4_VDD_IVA_SR_VOLT_REG, + .cmd_reg_addr = OMAP4_VDD_IVA_SR_CMD_REG, .i2c_high_speed = true, .vsel_to_uv = twl6030_vsel_to_uv, .uv_to_vsel = twl6030_uv_to_vsel, @@ -252,6 +257,7 @@ static struct omap_voltdm_pmic omap4_core_pmic = { .vp_timeout_us = OMAP4_VP_VLIMITTO_TIMEOUT_US, .i2c_slave_addr = OMAP4_SRI2C_SLAVE_ADDR, .volt_reg_addr = OMAP4_VDD_CORE_SR_VOLT_REG, + .cmd_reg_addr = OMAP4_VDD_CORE_SR_CMD_REG, .vsel_to_uv = twl6030_vsel_to_uv, .uv_to_vsel = twl6030_uv_to_vsel, }; -- cgit v1.2.3 From e5598a855b0e63b77b67c4ab708e09a23228d14f Mon Sep 17 00:00:00 2001 From: Barry Song Date: Wed, 21 Sep 2011 20:56:33 +0800 Subject: ARM: CSR: PM: save/restore timer status in suspend cycle SiRFprimaII will lose power in deepsleep mode except rtc, pmu and sdram self-refresh. This patch saves timer-related registers while suspending and restore them while resuming. Signed-off-by: Barry Song Acked-by: Arnd Bergmann --- arch/arm/mach-prima2/timer.c | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) diff --git a/arch/arm/mach-prima2/timer.c b/arch/arm/mach-prima2/timer.c index ed7ec48d11da..3b159615de24 100644 --- a/arch/arm/mach-prima2/timer.c +++ b/arch/arm/mach-prima2/timer.c @@ -40,6 +40,17 @@ #define SIRFSOC_TIMER_LATCH_BIT BIT(0) +#define SIRFSOC_TIMER_REG_CNT 11 + +static const u32 sirfsoc_timer_reg_list[SIRFSOC_TIMER_REG_CNT] = { + SIRFSOC_TIMER_MATCH_0, SIRFSOC_TIMER_MATCH_1, SIRFSOC_TIMER_MATCH_2, + SIRFSOC_TIMER_MATCH_3, SIRFSOC_TIMER_MATCH_4, SIRFSOC_TIMER_MATCH_5, + SIRFSOC_TIMER_INT_EN, SIRFSOC_TIMER_WATCHDOG_EN, SIRFSOC_TIMER_DIV, + SIRFSOC_TIMER_LATCHED_LO, SIRFSOC_TIMER_LATCHED_HI, +}; + +static u32 sirfsoc_timer_reg_val[SIRFSOC_TIMER_REG_CNT]; + static void __iomem *sirfsoc_timer_base; static void __init sirfsoc_of_timer_map(void); @@ -106,6 +117,27 @@ static void sirfsoc_timer_set_mode(enum clock_event_mode mode, } } +static void sirfsoc_clocksource_suspend(struct clocksource *cs) +{ + int i; + + writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, sirfsoc_timer_base + SIRFSOC_TIMER_LATCH); + + for (i = 0; i < SIRFSOC_TIMER_REG_CNT; i++) + sirfsoc_timer_reg_val[i] = readl_relaxed(sirfsoc_timer_base + sirfsoc_timer_reg_list[i]); +} + +static void sirfsoc_clocksource_resume(struct clocksource *cs) +{ + int i; + + for (i = 0; i < SIRFSOC_TIMER_REG_CNT; i++) + writel_relaxed(sirfsoc_timer_reg_val[i], sirfsoc_timer_base + sirfsoc_timer_reg_list[i]); + + writel_relaxed(sirfsoc_timer_reg_val[i - 2], sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_LO); + writel_relaxed(sirfsoc_timer_reg_val[i - 1], sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI); +} + static struct clock_event_device sirfsoc_clockevent = { .name = "sirfsoc_clockevent", .rating = 200, @@ -120,6 +152,8 @@ static struct clocksource sirfsoc_clocksource = { .mask = CLOCKSOURCE_MASK(64), .flags = CLOCK_SOURCE_IS_CONTINUOUS, .read = sirfsoc_timer_read, + .suspend = sirfsoc_clocksource_suspend, + .resume = sirfsoc_clocksource_resume, }; static struct irqaction sirfsoc_timer_irq = { -- cgit v1.2.3 From 9c2a51faab6de454407964987ad0cdb84edf2723 Mon Sep 17 00:00:00 2001 From: Barry Song Date: Wed, 21 Sep 2011 21:40:33 +0800 Subject: ARM: CSR: PM: save/restore irq status in suspend cycle SiRFprimaII will lose power in deepsleep mode except rtc, pmu and sdram self-refresh. So IRQ controller will lose status in suspend cyle. This patch saves irq mask/level registers while suspending and restore them while resuming. Signed-off-by: Barry Song Acked-by: Arnd Bergmann --- arch/arm/mach-prima2/irq.c | 40 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+) diff --git a/arch/arm/mach-prima2/irq.c b/arch/arm/mach-prima2/irq.c index cf80a72c0a09..d93ceef4a50a 100644 --- a/arch/arm/mach-prima2/irq.c +++ b/arch/arm/mach-prima2/irq.c @@ -14,6 +14,7 @@ #include #include #include +#include #define SIRFSOC_INT_RISC_MASK0 0x0018 #define SIRFSOC_INT_RISC_MASK1 0x001C @@ -73,3 +74,42 @@ void __init sirfsoc_of_irq_init(void) sirfsoc_irq_init(); } + +struct sirfsoc_irq_status { + u32 mask0; + u32 mask1; + u32 level0; + u32 level1; +}; + +static struct sirfsoc_irq_status sirfsoc_irq_st; + +static int sirfsoc_irq_suspend(void) +{ + sirfsoc_irq_st.mask0 = readl_relaxed(sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK0); + sirfsoc_irq_st.mask1 = readl_relaxed(sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK1); + sirfsoc_irq_st.level0 = readl_relaxed(sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL0); + sirfsoc_irq_st.level1 = readl_relaxed(sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL1); + + return 0; +} + +static void sirfsoc_irq_resume(void) +{ + writel_relaxed(sirfsoc_irq_st.mask0, sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK0); + writel_relaxed(sirfsoc_irq_st.mask1, sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK1); + writel_relaxed(sirfsoc_irq_st.level0, sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL0); + writel_relaxed(sirfsoc_irq_st.level1, sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL1); +} + +static struct syscore_ops sirfsoc_irq_syscore_ops = { + .suspend = sirfsoc_irq_suspend, + .resume = sirfsoc_irq_resume, +}; + +static int __init sirfsoc_irq_pm_init(void) +{ + register_syscore_ops(&sirfsoc_irq_syscore_ops); + return 0; +} +device_initcall(sirfsoc_irq_pm_init); -- cgit v1.2.3 From 2558bd99cb1426a05ac8f1c78dc9c75a83ceb4bb Mon Sep 17 00:00:00 2001 From: Rongjun Ying Date: Wed, 21 Sep 2011 21:46:20 +0800 Subject: ARM: CSR: PM: add sleep entry for SiRFprimaII This patch adds suspend-to-mem support for prima2. It will make prima2 enter DEEPSLEEP mode while accepting PM_SUSPEND_MEM command. Signed-off-by: Rongjun Ying Signed-off-by: Barry Song Acked-by: Arnd Bergmann --- arch/arm/mach-prima2/Makefile | 1 + arch/arm/mach-prima2/pm.c | 149 ++++++++++++++++++++++++++++++++++++++++++ arch/arm/mach-prima2/pm.h | 29 ++++++++ arch/arm/mach-prima2/sleep.S | 64 ++++++++++++++++++ 4 files changed, 243 insertions(+) create mode 100644 arch/arm/mach-prima2/pm.c create mode 100644 arch/arm/mach-prima2/pm.h create mode 100644 arch/arm/mach-prima2/sleep.S diff --git a/arch/arm/mach-prima2/Makefile b/arch/arm/mach-prima2/Makefile index f49d70b86854..13dd1604d951 100644 --- a/arch/arm/mach-prima2/Makefile +++ b/arch/arm/mach-prima2/Makefile @@ -6,3 +6,4 @@ obj-y += prima2.o obj-y += rtciobrg.o obj-$(CONFIG_DEBUG_LL) += lluart.o obj-$(CONFIG_CACHE_L2X0) += l2x0.o +obj-$(CONFIG_SUSPEND) += pm.o sleep.o diff --git a/arch/arm/mach-prima2/pm.c b/arch/arm/mach-prima2/pm.c new file mode 100644 index 000000000000..0ba39f3e16ba --- /dev/null +++ b/arch/arm/mach-prima2/pm.c @@ -0,0 +1,149 @@ +/* + * power management entry for CSR SiRFprimaII + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "pm.h" + +/* + * suspend asm codes will access these to make DRAM become self-refresh and + * system sleep + */ +u32 sirfsoc_pwrc_base; +void __iomem *sirfsoc_memc_base; + +static void sirfsoc_set_wakeup_source(void) +{ + u32 pwr_trigger_en_reg; + pwr_trigger_en_reg = sirfsoc_rtc_iobrg_readl(sirfsoc_pwrc_base + + SIRFSOC_PWRC_TRIGGER_EN); +#define X_ON_KEY_B (1 << 0) + sirfsoc_rtc_iobrg_writel(pwr_trigger_en_reg | X_ON_KEY_B, + sirfsoc_pwrc_base + SIRFSOC_PWRC_TRIGGER_EN); +} + +static void sirfsoc_set_sleep_mode(u32 mode) +{ + u32 sleep_mode = sirfsoc_rtc_iobrg_readl(sirfsoc_pwrc_base + + SIRFSOC_PWRC_PDN_CTRL); + sleep_mode &= ~(SIRFSOC_SLEEP_MODE_MASK << 1); + sleep_mode |= mode << 1; + sirfsoc_rtc_iobrg_writel(sleep_mode, sirfsoc_pwrc_base + + SIRFSOC_PWRC_PDN_CTRL); +} + +static int sirfsoc_pre_suspend_power_off(void) +{ + u32 wakeup_entry = virt_to_phys(cpu_resume); + + sirfsoc_rtc_iobrg_writel(wakeup_entry, sirfsoc_pwrc_base + + SIRFSOC_PWRC_SCRATCH_PAD1); + + sirfsoc_set_wakeup_source(); + + sirfsoc_set_sleep_mode(SIRFSOC_DEEP_SLEEP_MODE); + + return 0; +} + +static int sirfsoc_pm_enter(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_MEM: + sirfsoc_pre_suspend_power_off(); + + outer_flush_all(); + outer_disable(); + /* go zzz */ + cpu_suspend(0, sirfsoc_finish_suspend); + break; + default: + return -EINVAL; + } + return 0; +} + +static const struct platform_suspend_ops sirfsoc_pm_ops = { + .enter = sirfsoc_pm_enter, + .valid = suspend_valid_only_mem, +}; + +static int __init sirfsoc_pm_init(void) +{ + suspend_set_ops(&sirfsoc_pm_ops); + return 0; +} +late_initcall(sirfsoc_pm_init); + +static const struct of_device_id pwrc_ids[] = { + { .compatible = "sirf,prima2-pwrc" }, + {} +}; + +static int __init sirfsoc_of_pwrc_init(void) +{ + struct device_node *np; + + np = of_find_matching_node(NULL, pwrc_ids); + if (!np) + panic("unable to find compatible pwrc node in dtb\n"); + + /* + * pwrc behind rtciobrg is not located in memory space + * though the property is named reg. reg only means base + * offset for pwrc. then of_iomap is not suitable here. + */ + if (of_property_read_u32(np, "reg", &sirfsoc_pwrc_base)) + panic("unable to find base address of pwrc node in dtb\n"); + + of_node_put(np); + + return 0; +} +postcore_initcall(sirfsoc_of_pwrc_init); + +static const struct of_device_id memc_ids[] = { + { .compatible = "sirf,prima2-memc" }, + {} +}; + +static int __devinit sirfsoc_memc_probe(struct platform_device *op) +{ + struct device_node *np = op->dev.of_node; + + sirfsoc_memc_base = of_iomap(np, 0); + if (!sirfsoc_memc_base) + panic("unable to map memc registers\n"); + + return 0; +} + +static struct platform_driver sirfsoc_memc_driver = { + .probe = sirfsoc_memc_probe, + .driver = { + .name = "sirfsoc-memc", + .owner = THIS_MODULE, + .of_match_table = memc_ids, + }, +}; + +static int __init sirfsoc_memc_init(void) +{ + return platform_driver_register(&sirfsoc_memc_driver); +} +postcore_initcall(sirfsoc_memc_init); diff --git a/arch/arm/mach-prima2/pm.h b/arch/arm/mach-prima2/pm.h new file mode 100644 index 000000000000..bae6d77e01ab --- /dev/null +++ b/arch/arm/mach-prima2/pm.h @@ -0,0 +1,29 @@ +/* + * arch/arm/mach-prima2/pm.h + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#ifndef _MACH_PRIMA2_PM_H_ +#define _MACH_PRIMA2_PM_H_ + +#define SIRFSOC_PWR_SLEEPFORCE 0x01 + +#define SIRFSOC_SLEEP_MODE_MASK 0x3 +#define SIRFSOC_DEEP_SLEEP_MODE 0x1 + +#define SIRFSOC_PWRC_PDN_CTRL 0x0 +#define SIRFSOC_PWRC_PON_OFF 0x4 +#define SIRFSOC_PWRC_TRIGGER_EN 0x8 +#define SIRFSOC_PWRC_PIN_STATUS 0x14 +#define SIRFSOC_PWRC_SCRATCH_PAD1 0x18 +#define SIRFSOC_PWRC_SCRATCH_PAD2 0x1C + +#ifndef __ASSEMBLY__ +extern int sirfsoc_finish_suspend(unsigned long); +#endif + +#endif + diff --git a/arch/arm/mach-prima2/sleep.S b/arch/arm/mach-prima2/sleep.S new file mode 100644 index 000000000000..0745abc365fc --- /dev/null +++ b/arch/arm/mach-prima2/sleep.S @@ -0,0 +1,64 @@ +/* + * sleep mode for CSR SiRFprimaII + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#include +#include +#include + +#include "pm.h" + +#define DENALI_CTL_22_OFF 0x58 +#define DENALI_CTL_112_OFF 0x1c0 + + .text + +ENTRY(sirfsoc_finish_suspend) + @ r5: mem controller + ldr r0, =sirfsoc_memc_base + ldr r5, [r0] + @ r6: pwrc base offset + ldr r0, =sirfsoc_pwrc_base + ldr r6, [r0] + @ r7: rtc iobrg controller + ldr r0, =sirfsoc_rtciobrg_base + ldr r7, [r0] + + @ Read the power control register and set the + @ sleep force bit. + add r0, r6, #SIRFSOC_PWRC_PDN_CTRL + bl __sirfsoc_rtc_iobrg_readl + orr r0,r0,#SIRFSOC_PWR_SLEEPFORCE + add r1, r6, #SIRFSOC_PWRC_PDN_CTRL + bl sirfsoc_rtc_iobrg_pre_writel + mov r1, #0x1 + + @ read the MEM ctl register and set the self + @ refresh bit + + ldr r2, [r5, #DENALI_CTL_22_OFF] + orr r2, r2, #0x1 + + @ Following code has to run from cache since + @ the RAM is going to self refresh mode + .align 5 + str r2, [r5, #DENALI_CTL_22_OFF] + +1: + ldr r4, [r5, #DENALI_CTL_112_OFF] + tst r4, #0x1 + bne 1b + + @ write SLEEPFORCE through rtc iobridge + + str r1, [r7] + @ wait rtc io bridge sync +1: + ldr r3, [r7] + tst r3, #0x01 + bne 1b + b . -- cgit v1.2.3 From 2edc7ba5e8fdba327e16d3d0086e831c5fe6f577 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Wed, 21 Sep 2011 09:24:53 -0700 Subject: ARM: OMAP: voltage: voltage layer present, even when CONFIG_PM=n Even when CONFIG_PM=n, we try to scale the boot voltage to a sane, known value using OPP table to find matching voltage based on boot frequency. This should be done, even when CONFIG_PM=n to avoid mis-configured bootloaders and/or boot voltage assumptions made by boot loaders. Also fixes various compile problems due to depenencies between voltage domain and powerdomain code (also present when CONFIG_PM=n). Reported-by: Arnd Bergmann Signed-off-by: Kevin Hilman --- arch/arm/mach-omap2/Makefile | 2 -- arch/arm/mach-omap2/voltage.h | 14 -------------- 2 files changed, 16 deletions(-) diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 824718969e31..ef77a00dd5c4 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -89,7 +89,6 @@ obj-$(CONFIG_ARCH_OMAP4) += prcm.o cm2xxx_3xxx.o cminst44xx.o \ vp44xx_data.o # OMAP voltage domains -ifeq ($(CONFIG_PM),y) voltagedomain-common := voltage.o vc.o vp.o obj-$(CONFIG_ARCH_OMAP2) += $(voltagedomain-common) \ voltagedomains2xxx_data.o @@ -97,7 +96,6 @@ obj-$(CONFIG_ARCH_OMAP3) += $(voltagedomain-common) \ voltagedomains3xxx_data.o obj-$(CONFIG_ARCH_OMAP4) += $(voltagedomain-common) \ voltagedomains44xx_data.o -endif # OMAP powerdomain framework powerdomain-common += powerdomain.o powerdomain-common.o diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h index 4c0980941991..16a1b092cf36 100644 --- a/arch/arm/mach-omap2/voltage.h +++ b/arch/arm/mach-omap2/voltage.h @@ -148,25 +148,11 @@ void omap_voltage_get_volttable(struct voltagedomain *voltdm, struct omap_volt_data **volt_data); struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm, unsigned long volt); -#ifdef CONFIG_PM int omap_voltage_register_pmic(struct voltagedomain *voltdm, struct omap_voltdm_pmic *pmic); void omap_change_voltscale_method(struct voltagedomain *voltdm, int voltscale_method); int omap_voltage_late_init(void); -#else -static inline int omap_voltage_register_pmic(struct voltagedomain *voltdm, - struct omap_voltdm_pmic *pmic) -{ - return -EINVAL; -} -static inline void omap_change_voltscale_method(struct voltagedomain *voltdm, - int voltscale_method) {} -static inline int omap_voltage_late_init(void) -{ - return -EINVAL; -} -#endif extern void omap2xxx_voltagedomains_init(void); extern void omap3xxx_voltagedomains_init(void); -- cgit v1.2.3 From 917d853564530dd5e73c8c1604e823465ff9b713 Mon Sep 17 00:00:00 2001 From: Barry Song Date: Thu, 15 Sep 2011 19:16:28 -0700 Subject: ARM: CSR: call l2x0_of_init to init L2 cache of SiRFprimaII Cc: Rob Herring Signed-off-by: Barry Song --- arch/arm/boot/dts/prima2-cb.dts | 5 ++++- arch/arm/mach-prima2/l2x0.c | 46 ++++++++--------------------------------- 2 files changed, 13 insertions(+), 38 deletions(-) diff --git a/arch/arm/boot/dts/prima2-cb.dts b/arch/arm/boot/dts/prima2-cb.dts index 17b6737c4ee5..34ae3a64ba25 100644 --- a/arch/arm/boot/dts/prima2-cb.dts +++ b/arch/arm/boot/dts/prima2-cb.dts @@ -39,9 +39,12 @@ ranges = <0x40000000 0x40000000 0x80000000>; l2-cache-controller@80040000 { - compatible = "arm,pl310-cache"; + compatible = "arm,pl310-cache", "sirf,prima2-pl310-cache"; reg = <0x80040000 0x1000>; interrupts = <59>; + arm,tag-latency = <1 1 1>; + arm,data-latency = <1 1 1>; + arm,filter-ranges = <0 0x40000000>; }; intc: interrupt-controller@80020000 { diff --git a/arch/arm/mach-prima2/l2x0.c b/arch/arm/mach-prima2/l2x0.c index 9cda2057bcfb..c99837797d76 100644 --- a/arch/arm/mach-prima2/l2x0.c +++ b/arch/arm/mach-prima2/l2x0.c @@ -8,52 +8,24 @@ #include #include -#include -#include #include -#include #include -#include -#define L2X0_ADDR_FILTERING_START 0xC00 -#define L2X0_ADDR_FILTERING_END 0xC04 - -static struct of_device_id l2x_ids[] = { - { .compatible = "arm,pl310-cache" }, +static struct of_device_id prima2_l2x0_ids[] = { + { .compatible = "sirf,prima2-pl310-cache" }, + {}, }; -static int __init sirfsoc_of_l2x_init(void) +static int __init sirfsoc_l2x0_init(void) { struct device_node *np; - void __iomem *sirfsoc_l2x_base; - - np = of_find_matching_node(NULL, l2x_ids); - if (!np) - panic("unable to find compatible l2x node in dtb\n"); - - sirfsoc_l2x_base = of_iomap(np, 0); - if (!sirfsoc_l2x_base) - panic("unable to map l2x cpu registers\n"); - - of_node_put(np); - - if (!(readl_relaxed(sirfsoc_l2x_base + L2X0_CTRL) & 1)) { - /* - * set the physical memory windows L2 cache will cover - */ - writel_relaxed(PLAT_PHYS_OFFSET + 1024 * 1024 * 1024, - sirfsoc_l2x_base + L2X0_ADDR_FILTERING_END); - writel_relaxed(PLAT_PHYS_OFFSET | 0x1, - sirfsoc_l2x_base + L2X0_ADDR_FILTERING_START); - writel_relaxed(0, - sirfsoc_l2x_base + L2X0_TAG_LATENCY_CTRL); - writel_relaxed(0, - sirfsoc_l2x_base + L2X0_DATA_LATENCY_CTRL); + np = of_find_matching_node(NULL, prima2_l2x0_ids); + if (np) { + pr_info("Initializing prima2 L2 cache\n"); + return l2x0_of_init(0x40000, 0); } - l2x0_init((void __iomem *)sirfsoc_l2x_base, 0x00040000, - 0x00000000); return 0; } -early_initcall(sirfsoc_of_l2x_init); +early_initcall(sirfsoc_l2x0_init); -- cgit v1.2.3 From 24469df4ed8943104980fa7405011870ede8105a Mon Sep 17 00:00:00 2001 From: Barry Song Date: Mon, 10 Oct 2011 02:50:54 -0700 Subject: ARM: CSR: PM: use outer_resume to resume L2 cache now we move l2x0 resume to Linux from bootloader since l2x0 already has resume support in core. Signed-off-by: Barry Song --- arch/arm/mach-prima2/pm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-prima2/pm.c b/arch/arm/mach-prima2/pm.c index 0ba39f3e16ba..cb53160f6c5d 100644 --- a/arch/arm/mach-prima2/pm.c +++ b/arch/arm/mach-prima2/pm.c @@ -71,6 +71,7 @@ static int sirfsoc_pm_enter(suspend_state_t state) outer_disable(); /* go zzz */ cpu_suspend(0, sirfsoc_finish_suspend); + outer_resume(); break; default: return -EINVAL; -- cgit v1.2.3