summaryrefslogtreecommitdiff
path: root/include/asm-arm/arch-pxa/pxa-regs.h
AgeCommit message (Collapse)AuthorFilesLines
2008-06-02[ARM] pxa: separate out power manager and clock registersRussell King1-156/+2
The power manager and core clock registers aren't present in PXA3 CPUs. Move them out of pxa-regs.h into pxa2xx-regs.h, and include pxa2xx-regs.h where necessary. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-05-19[ARM] pxa: separate PXA25x and PXA27x UDC register definitionsRussell King1-412/+0
The PXA25x and PXA27x USB device controller register definitions are different. Currently, they live side by side in pxa-regs.h, but only one set is available depending on the setting of PXA25x or PXA27x. This means that if we build to support both PXA25x and PXA27x, the PXA27x definitions are unavailable, even to PXA27x specific code. Remove these definitions from pxa-regs.h, and place them in separate files. Include these files where appropriate. Note: according to the dependencies in drivers/usb/gadget/Kconfig, we do not support the UDC on PXA27x nor PXA3xx CPUs, so remove the platform devices from pxa27x.c and pxa3xx.c. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-30pxafb: convert fb driver to use ioremap() and __raw_{readl, writel}eric miao1-196/+0
This is part of the effort moving peripheral registers outside of pxa-regs.h, and using ioremap() make it possible the same IP can be re-used on different processors with different registers space As a result, the fixed mapping in pxa_map_io() is removed. The regs-lcd.h can actually moved to where closer to pxafb.c but some of its bit definitions are directly used by various platform code, though this is not a good style. Signed-off-by: eric miao <eric.miao@marvell.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-19[ARM] 4959/1: PXA: Fix misprint in CICR1_RGBT_CONVMike Rapoport1-1/+1
This patch fixes misprint in definition of CICR1_RGBT_CONV in include/asm-arm/arch-pxa/pxa-regs.h Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19[ARM] pxa: remove keypad register definitions from pxa-regs.heric miao1-56/+0
Keypad registers are now fully defined within pxa27x-keypad.c, no need to keep those definitions in pxa-regs.h Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19[ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.heric miao1-301/+0
two reasons: 1. GPIO namings and their mode definitions are conceptually not part of the PXA register definitions 2. this is actually a temporary move in the transition of PXA2xx to use MFP-alike APIs (as what PXA3xx is now doing), so that legacy code will still work and new code can be added in step by step Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19[ARM] pxa: integrate low IRQ chip (ICIP) and high IRQ chip (ICIP2) into oneeric miao1-6/+5
This makes the code better organized and simplified a bit. The change will lose a bit of performance when performing IRQ ack/mask/unmask,but that's not too much after checking the result binary. This patch also removes the ugly #ifdef CONFIG_PXA27x .. #endif by carefully not to access those pxa{27x,3xx} specific registers, this is done by keeping an internal IRQ number variable. The pxa-regs.h is also modified so registers for IRQ > PXA_IRQ(31) are made public even if CONFIG_PXA{27x,3xx} isn't defined (for pxa25x's sake) The incorrect assumption in the original code that internal irq starts from 0 is also corrected by comparing with PXA_IRQ(0). "struct sys_device" for the IRQ are reduced into one single device on pxa{27x,3xx}. Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19[ARM] 4868/1: Enhance pxa270 GPIO definitionsRobert Jarzmik1-14/+54
Enhanced GPIO alternate functions descriptions, taken from Intel PXA270 Developers Manual. Signed-off-by: Robert Jarzmik <rjarzmik@free.fr> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-29[ARM] 4843/1: Add GCR_CLKBPB for PXA3xxMark Brown1-0/+3
The PXA3xx AC97 controller has an additional control bit GCR_CLKBPB which must be used during cold reset. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-05gpiolib support for the PXA architecturePhilipp Zabel1-0/+13
This adds gpiolib support for the PXA architecture: - move all GPIO API functions from generic.c into gpio.c - convert the gpio_get/set_value macros into inline functions This makes it easier to hook up GPIOs provided by external chips like ASICs and CPLDs. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Jean Delvare <khali@linux-fr.org> Cc: Eric Miao <eric.miao@marvell.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Ben Gardner <bgardner@wabtec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> [ Minor ARM fixup from David Brownell folded into this ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-03include/asm-arm/: Spelling fixesJoe Perches1-17/+17
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-01-26[ARM] pxa: move memory controller registers into pxa2xx-regs.hRussell King1-63/+0
PXA3 has a different memory controller from PXA2 platforms. Avoid clashing definitions by moving the PXA2 definitions to pxa2xx-regs.h Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26[ARM] pxa: make OHCI register definitions available to both pxa27x and pxa3xxeric miao1-68/+71
Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-01-26[ARM] pxa: move SSP register definitions from pxa-regs.h to regs-ssp.heric miao1-167/+1
Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-12-08[ARM] 4690/1: PXA: fix CKEN corruption in PXA27x AC97 cold reset codeMichael Brunner1-0/+1
Fix CKEN register corruption in the PXA27x cold reset code located in sound/arm/pxa27x-ac97.c. The problem has been introduced with a pxa_set_cken() function change in linux 2.6.23. This patch is based on patch 4527/1 that fixes the same problem in the ASoC PXA-AC97 driver. Additionally a definition for the CKEN index value is added and applied to both PXA AC97 drivers. Signed-off-by: Michael Brunner <mibru@gmx.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-11-29[ARM] 4672/1: pxa: fix DRCMR(n) to support PXA27x and later processorseric miao1-1/+4
Signed-off-by: eric miao <eric.miao@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-10-16pxafb: Add support for other palette formatsHans J. Koch1-0/+11
This patch adds support for the other three palette formats possible with the PXA LCD controller. This is required on boards where an LCD is connected with all its 18 bits. With this patch, it's possible to use an 8-bit mode with 18-bit palette entries. This used to be possible in 2.4 kernels but disappeared in 2.6. With current kernels, you can only get wrong colours out of an LCD connected this way. Users can choose the palette format by doing something like this in their board definition: static struct pxafb_mach_info my_fb_info = { [...] .lccr3 = LCCR3_OutEnH | LCCR3_PixFlEdg | LCCR3_PDFOR_3, .lccr4 = LCCR4_PAL_FOR_2, [...] }; Signed-off-by: Hans J. Koch <hjk@linutronix.de> Signed-off-by: Antonino Daplas <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-15[ARM] pxa: PXA3xx base supporteric miao1-1/+1
Signed-off-by: eric miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12[ARM] pxa: remove MMC register defines from pxa-regs.hRussell King1-21/+1
pxamci.h redefines the MMC registers differently so they can be used with ioremap. Remove the incompatible definitions from pxa-regs.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-04-21[ARM] 4304/1: removes the unnecessary bit number from CKENnn_XXXXEric Miao1-29/+29
This patch removes the unnecessary bit number from CKENnn_XXXX definitions for PXA, so that CKEN0_PWM0 --> CKEN_PWM0 CKEN1_PWM1 --> CKEN_PWM1 ... CKEN24_CAMERA --> CKEN_CAMERA The reasons for the change of these defitions are: 1. they do not scale - they are currently valid for pxa2xx, but definitely not valid for pxa3xx, e.g., pxa3xx has bit 3 for camera instead of bit 24 2. they are unnecessary - the peripheral name within the definition has already announced its usage, we don't need those bit numbers to know which peripheral we are going to enable/disable clock for 3. they are inconvenient - think about this: a driver programmer for pxa has to remember which bit in the CKEN register to turn on/off Another change in the patch is to make the definitions equal to its clock bit index, so that #define CKEN_CAMERA (24) instead of #define CKEN_CAMERA (1 << 24) this change, however, will add a run-time bit shift operation in pxa_set_cken(), but the benefit of this change is that it scales when bit index exceeds 32, e.g., pxa3xx has two registers CKENA and CKENB, totally 64 bit for this, suppose CAMERA clock enabling bit is CKENB:10, one can simply define CKEN_CAMERA to be (32 + 10) and so that pxa_set_cken() need minimum change to adapt to that. Signed-off-by: eric miao <eric.y.miao@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-24[ARM] 4278/1: configure pxa27x I2C SCL as "input"Guennadi Liakhovetski1-1/+1
It has been reported by Julian Deng that configuring the pxa27x i2c SCL line as output generates a short negative pulse on it during the call to pxa_gpio_mode(GPIO117_I2CSCL_MD); as it first switches it to output and then configures it for the alternate function. The SCL line is in fact bidirectional and can also be configured as 117 | GPIO_ALT_FN_1_IN, in which case the pulse is not generated. This is exactly what this patch does. Author: Julian Deng <dengtj@sitek.cn> Signed-off-by: G. Liakhovetski <gl@dsa-ac.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-17Merge AT91, EP93xx, General devel, PXA, S3C, V6+ and Xscale treesRussell King1-8/+11
2007-02-17[ARM] 4090/2: avoid clash between PXA and SA1111 definesNicolas Pitre1-5/+0
The Lubbock platform uses both a PXA25x and a SA1111 at the same time. Both chips have the same "Serial Audio Controller" registers although the SA1111 one is never expected to be used in preference to the PXA25x one. So let's disable the SA1111 defines whenever compilation is for a PXA architecture and make the PXA defines always defined. This removes a bunch of "already defined" warnings as well since the current hack to prevent them depended on include ordering which wasn't always right. While at it, clean up the SA1111 defines allowing to get rid of the __CCREG() macro. Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-02-08[ARM] 4152/1: Add PXA SSP audio register defs and fixupsLiam Girdwood1-8/+11
This patchs adds some missing register bit defs for the PXA SSP ports audio registers and fixes up some other broken bit definitions as noticed by Russell. Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-01-02[ARM] 4081/1: Add definition for TI Sync Serial ProtocolPhilipp Zabel1-0/+1
Of the possible SSP frame formats (FRF bits in SSCR0), only SSCR0_PSP is defined. Other possible formats are Motorola SPI (0<<4), TI SSP (1<<4) and Microwire (2<<4). Attached patch adds a definition SSCR0_TISSP. This mode is used for the sound codec attached to the PXA272 SSP1 of some HTC PDA phones. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-01-02[ARM] 4080/1: Fix for the SSCR0_SlotsPerFrm macroPhilipp Zabel1-1/+1
The SSCR0_SlotsPerFrm macro writes a 3-bit value to bits [2:0], while the correct location of FRDC in SSCR0 is at bits [26:24]. This patch adds the missing "<< 24". Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-30[ARM] 3894/1: pxa27x: Update DCSR_EORINTR bit definition in DCSRstanley cai1-1/+1
This patch updates a bit definition name to align with the PXA27x spec.EORINTR(End-Of-Receive Intr) bit in DCSR register (DMA Channel Control/Status Register) Signed-off-by: Stanley Cai <stanley.w.cai@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-30[ARM] 3893/1: pxa27x: Update UDCISR1 bit definitionsstanley cai1-6/+5
This patch updates several bit definitions name in UDCISR1 register. Signed-off-by: Stanley Cai <stanley.w.cai@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-11-03[ARM] 3919/1: Fixed definition of some PXA270 CIF related registersEnrico Scholz1-4/+4
Fixed definition of some CIF registers; see PXA27x Developer\'s Manual. Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-10-14[ARM] 3888/1: add pxa27x SSP FSRT register bit definitionLiam Girdwood1-0/+1
This patch adds a register bit definition for the pxa27x SSP port Frame Sync Relative Timing (FSRT) bit. Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-29[ARM] 3666/1: TRIZEPS4 [1/5] coreJürgen Schindele1-0/+2
Patch from Jürgen Schindele This patch adds support for Trizeps4 SoM and ConXS-evalboard from "Keith und Koep" This DIMM-module is based on PXA270. Signed-off-by: Jürgen Schindele <linux@schindele.name> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-06-20Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds1-1/+17
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (42 commits) [ARM] Fix tosa build error [ARM] 3610/1: Make reboot work on Versatile [ARM] 3609/1: S3C24XX: defconfig update for s3c2410_defconfig [ARM] 3591/1: Anubis: IDE device definitions [ARM] Include asm/hardware.h not asm/arch/hardware.h [ARM] 3594/1: Poodle: Add touchscreen support + other updates [ARM] 3564/1: sharpsl_pm: Abstract some machine specific parameters [ARM] 3561/1: Poodle: Correct the MMC/SD power control [ARM] 3593/1: Add reboot and shutdown handlers for Zaurus handhelds [ARM] 3599/1: AT91RM9200 remove global variables [ARM] 3607/1: AT91RM9200 misc fixes [ARM] 3605/1: AT91RM9200 Power Management [ARM] 3604/1: AT91RM9200 New boards [ARM] 3603/1: AT91RM9200 remove old files [ARM] 3592/1: AT91RM9200 Serial driver update [ARM] 3590/1: AT91RM9200 Platform devices support [ARM] 3589/1: AT91RM9200 DK/EK board update [ARM] 3588/1: AT91RM9200 CSB337/637 board update [ARM] 3587/1: AT91RM9200 hardware headers [ARM] 3586/1: AT91RM9200 header update ...
2006-06-20[ARM] 3606/1: PXA27x SSP Register definitionsLiam Girdwood1-1/+17
Patch from Liam Girdwood This patch adds some new PXA27x SSP port registers and also fixes the SSP slots per frame macro Changes:- o SSCR0_SlotPerFrm fixed o Added SSP port TSA, RSA, TSS and ACD registers Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-04-26Don't include linux/config.h from anywhere else in include/David Woodhouse1-1/+0
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-03-30[ARM] 3434/1: pxa i2s amsl defineMarc-Andre Hebert1-1/+1
Patch from Marc-Andre Hebert The error concerns a bit mask define for the AMSL bit of the SACR1 register in the 2.6 kernel tree. The AMSL is bit 0 and it was defined as so in the 2.4 kernel tree but it is inccorrectly set as bit 1 (a reserved bit) in the 2.6 kernel tree. Signed-off-by: Marc-Andre Hebert <marcandreh@humanware.ca> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-18[ARM] 3267/1: PXA27x SSP controller register definesDavid Vrabel1-0/+14
Patch from David Vrabel PXA27x SSP controller has a few different registers, including SCR (serial clock rate) in SSCR0. Signed-off-by: David Vrabel <dvrabel@arcom.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-05[ARM] 3206/1: Modifications to the bus arbiter controller for the Intel PXA27xJared Hulbert1-0/+12
Patch from Jared Hulbert The following patch changes the bus arbiter controller settings for the Intel PXA27x Application Processor Family. Up to 5% better video performance. It parks the bus on the core while not in use and sets the arbitration for other bus items. The patch only applies changes to the Intel Mainstone development platform. This patch is not compatible with preproduction Intel PXA27x silicon. This patch is based on the Intel Linux Preview Kit released to the public on 25 Feb. 2005 found at ftp://ftp.arm.linux.org.uk/pub/linux/arm/people/xscale/mainstone/02-25-2005/. Signed-off-by: Justin A Treon <justin_treon@yahoo.com> Signed-off-by: Jared Hulbert <jaredeh@gmail.com> Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-28[ARM] 2897/2: PXA2xx IRDA supportNicolas Pitre1-2/+0
Patch from Nicolas Pitre This is the PXA2xx common IRDA driver, plus platform support for Lubbock and Mainstone. Signed-off-by: Nicolas Pitre <nico@cam.org> Acked-by: Jean Tourrilhes <jt@hpl.hp.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-28[ARM] 3029/1: Add HWUART support for PXA 255/26xMatt Reimer1-0/+33
Patch from Matt Reimer Adds support for HWUART on PXA 255 / 26x. This patch originally came from http://svn.rungie.com/svn/gumstix-buildroot/trunk/sources/kernel-patches/000-gumstix-hwuart.patch and has been tweaked by me. Signed-off-by: Matt Reimer <mreimer@vpop.net> Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-28[ARM] 2787/2: PXA27x low power modes supportTodd Poynor1-0/+7
Patch from Todd Poynor Add symbols for PXA2xx PWRMODE register M field that selects low-power mode, replace unadorned constants. Honor power mode parameter of pxa_cpu_suspend(mode), no longer force to 3 (sleep). Full Deep Sleep low-power mode support for PXA27x is pending generic PM interfaces to select more than 2 suspend-to-RAM-style power modes, but this is expected soon. This can be hardcoded in the meantime by replacing the pxa_cpu_suspend() parameter value. From David Burrage and Todd Poynor. Try #2 removes one of the register copies and moves the code to save the pxa_cpu_suspend parameter to immediately surround the call that requires the parameter value be preserved. Signed-off-by: Todd Poynor <tpoynor@mvista.com> Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-18[ARM] 3023/1: pxa-regs: Typo in ARM pxa register definitions.Paul Schulz1-1/+1
Patch from Paul Schulz The following trivial patch is to fix what looks like a typo in the PXA register definitions. The correction comes directly from the definition in the Intel Documentation. http://www.intel.com/design/pca/applicationsprocessors/manuals/278693.htm Intel(R) PXA 255 Processor - Developers Manual - Jan 2004 - Page 12-33 Neither 'UDCCS_IO_ROF' or 'UDCCS_IO_DME' are currently used elseware in the main code (from grep of tree)... The current definitions have been in the code since at lease 2.4.7. Signed-off-by: Paul Schulz <paul@mawsonlakes.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-12[ARM] 3003/1: SSP channel map register updates for pxa2xxLiam Girdwood1-3/+4
Patch from Liam Girdwood This patch updates the pxa2xx channel map registers definitions in pxa-regs.h Changes:- o Added description for SSP2 registers o Added definitions for SSP3 registers Signed-off-by:Liam Girdwood <liam.girdwood@wolfsonmicro.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-08-29[ARM] 2861/1: PXA: Add some extra pxa27x register definitionsRichard Purdie1-0/+29
Patch from Richard Purdie Add some extra pxa27x register definitions needed for the Sharp SL-C3000 (Spitz). Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-01[PATCH] ARM: 2782/1: PXA27x MDREFR K0DB4 defineTodd Poynor1-0/+1
Patch from Todd Poynor Add definition of K0DB4 SDCLK<0,3> divide-by-4 control/status bit in the MDREFR register for Intel XScale PXA27x. Signed-off-by: Todd Poynor <tpoynor@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-07-01[PATCH] ARM: 2781/2: PXA27x Standby mode take 2Todd Poynor1-0/+1
Patch from Todd Poynor Add support for PXA27x Standby mode, a low-power mode that retains CPU and some peripheral state (the existing "sleep" mode is a power-power mode that retains less state). Activated via: echo -n standby > /sys/power/state From: David Burrage and Todd Poynor Signed-off-by: Todd Poynor <tpoynor@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-08[PATCH] ARM: 2703/1: pxa-regs.h: complete I2S GPIO alternate functions for ā†µGiorgio Padrin1-0/+2
PXA27x Patch from Giorgio Padrin The patch completes I2S GPIO alternate functions for PXA27x, adding I2S_SYSCLK. File: pxa-regs.h . Signed-off-by: Giorgio Padrin Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-04-16Linux-2.6.12-rc2Linus Torvalds1-0/+2251
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 06:45:16 +0000