summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2012-02-10drivers/base: add bus for System-on-Chip devicesLee Jones3-0/+187
Traditionally, any System-on-Chip based platform creates a flat list of platform_devices directly under /sys/devices/platform. In order to give these some better structure, this introduces a new bus type for soc_devices that are registered with the new soc_device_register() function. All devices that are on the same chip should then be registered as child devices of the soc device. The soc bus also exports a few standardised device attributes which allow user space to query the specific type of soc. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-09DWC3: use module_pci_driverGreg Kroah-Hartman1-11/+1
This cuts down on the boilerplate code. Cc: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-09w1: Use linux/gpio.h rather than asm/gpio.hMark Brown1-2/+1
Direct inclusion of the asm header has long been deprecated by the introduction of gpiolib. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Evgeniy Polyakov <zbr@ioremap.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-09drivers: hv: Increase the number of VCPUs supported in the guestK. Y. Srinivasan2-5/+4
The current code arbirarily limited the number of CPUs the guest could have. Change that so that we can support the maximum number of CPUs the guest can support. While we use NR_CPUS to size the per-cpu state all we are allocating based on NR_CPUS are the pointers to per-cpu state that will be allocatted in the context of the initializing CPU. This patch triggers a checkpatch warning for the usage of NR_CPU and since all we are allocating a couple of pointers per CPU, it should be ok. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-09drivers: hv: kvp: Cleanup the kernel/user protocolK. Y. Srinivasan1-16/+25
Now, cleanup the user/kernel KVP protocol by using the same structure definition that is used for host/guest KVP protocol. This simplifies the code. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-08ACPI: remove duplicated lines of merging problems with acpi_processor_startYinghai Lu1-17/+1
When checking driver-core tree, found crazying warnings on my setups. [ 216.025849] calling acpi_processor_init+0x0/0x81 @ 1 [ 216.045332] ACPI: Requesting acpi_cpufreq [ 216.047454] Monitor-Mwait will be used to enter C-1 state [ 216.047912] Monitor-Mwait will be used to enter C-3 state [ 216.065270] ACPI: acpi_idle registered with cpuidle [ 216.068241] kobject (ffff8870364a1940): tried to init an initialized object, something is seriously wrong. [ 216.085287] Pid: 1, comm: swapper/0 Not tainted 3.3.0-rc2-tip-yh-02428-ge663840-dirty #247 [ 216.105041] Call Trace: [ 216.105192] [<ffffffff813a9c06>] kobject_init+0x33/0x83 [ 216.124880] [<ffffffff813aa1f8>] kobject_init_and_add+0x23/0x57 [ 216.125158] [<ffffffff819f3a08>] cpuidle_add_sysfs+0x49/0x62 [ 216.144850] [<ffffffff819f2a28>] __cpuidle_register_device+0xe6/0x10e [ 216.145182] [<ffffffff819f2ea4>] cpuidle_register_device+0x25/0x4d [ 216.164912] [<ffffffff81cb5774>] acpi_processor_power_init+0x13e/0x16c [ 216.165205] [<ffffffff81427620>] ? acpi_processor_get_throttling_info+0x128/0x158 [ 216.185012] [<ffffffff81c68ae5>] acpi_processor_start+0x62/0x11d [ 216.204861] [<ffffffff81cb55ff>] acpi_processor_add+0x1b0/0x1e7 [ 216.205144] [<ffffffff81402a7e>] acpi_device_probe+0x4e/0x11c [ 216.225063] [<ffffffff8148f0e7>] really_probe+0x99/0x126 [ 216.225328] [<ffffffff8148f2a3>] driver_probe_device+0x3b/0x56 [ 216.244846] [<ffffffff8148f31d>] __driver_attach+0x5f/0x82 [ 216.245101] [<ffffffff8148f2be>] ? driver_probe_device+0x56/0x56 [ 216.264668] [<ffffffff8148db80>] bus_for_each_dev+0x5c/0x88 [ 216.264942] [<ffffffff8148eea7>] driver_attach+0x1e/0x20 [ 216.284639] [<ffffffff8148eaec>] bus_add_driver+0xca/0x21d [ 216.284903] [<ffffffff81095827>] ? local_clock+0xf/0x3c [ 216.304580] [<ffffffff82814177>] ? acpi_fan_init+0x18/0x18 [ 216.304849] [<ffffffff8148f79b>] driver_register+0x91/0xfe [ 216.324545] [<ffffffff82814177>] ? acpi_fan_init+0x18/0x18 [ 216.324813] [<ffffffff81403705>] acpi_bus_register_driver+0x43/0x45 [ 216.344563] [<ffffffff828141a7>] acpi_processor_init+0x30/0x81 [ 216.344845] [<ffffffff82814177>] ? acpi_fan_init+0x18/0x18 [ 216.364590] [<ffffffff810001e7>] do_one_initcall+0x57/0x134 [ 216.364868] [<ffffffff827e6f8c>] kernel_init+0x146/0x1c0 [ 216.384512] [<ffffffff81d03aa4>] kernel_thread_helper+0x4/0x10 [ 216.384819] [<ffffffff81cfbb5d>] ? retint_restore_args+0xe/0xe [ 216.404578] [<ffffffff827e6e46>] ? start_kernel+0x3ab/0x3ab [ 216.424530] [<ffffffff81d03aa0>] ? gs_change+0xb/0xb [ 216.424793] ------------[ cut here ]------------ [ 216.425038] WARNING: at fs/sysfs/dir.c:502 sysfs_add_one+0x97/0xab() [ 216.444480] Hardware name: Sun Fire X4800 [ 216.444668] sysfs: cannot create duplicate filename '/devices/system/cpu/cpu0/cpuidle' ... It turns out acpi_processor_power_init() get called two time in acpi_processor_add and acpi_processor_start. Found several lines are duplicated in those two functions even related commit move them. The related patches are ok. Not sure how it could happen, looks like git problem. -v2: add back acpi_processor_load_module(pr) to acpi_processor_load_start Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Thomas Renninger <trenn@suse.de> Cc: Len Brown <lenb@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-02cpufreq/gx: Fix the compile errorAlan Cox1-1/+1
Someone forgot to test this one it seems. Signed-off-by: Alan Cox <alan@linux.intel.com> Acked-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-02drivers: hv: kvp: Move the contents of hv_kvp.h to hyperv.hK. Y. Srinivasan3-186/+0
In preparation for consolidating all KVP related defines into a single header file that both the kernel and user level components can use, move the contents of hv_kvp.h into hyperv.h. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-02drivers: hv: kvp: Add/cleanup connector definesK. Y. Srinivasan1-3/+0
The current KVP code carries some private connector related defines. Update connector.h to have all the KVP defines. As part of this patch get rid of some unused defines. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-02Merge 3.3-rc2 into the driver-core-next branch.Greg Kroah-Hartman254-5679/+2860
This was done to resolve a merge and build problem with the drivers/acpi/processor_driver.c file. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-30Merge branch 'hwmon-for-linus' of ↵Linus Torvalds3-6/+13
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (w83627ehf) Disable setting DC mode for pwm2, pwm3 on NCT6776F hwmon: (sht15) fix bad error code MAINTAINERS: Drop maintainer for MAX1668 hwmon driver MAINTAINERS: Add hwmon entries for Wolfson hwmon: (f71805f) Fix clamping of temperature limits
2012-01-30Merge branch 'for-torvalds' of ↵Linus Torvalds6-63/+85
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Here are some fixes to the pin control system that has accumulated since -rc1. Mainly Tony Lindgren fixed the module load/unload logic and the rest are minor fixes and documentation. * 'for-torvalds' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: add checks for empty function names pinctrl: fix pinmux_hog_maps when ctrl_dev_name is not set pinctrl: fix some pinmux typos pinctrl: free debugfs entries when unloading a pinmux driver pinctrl: unbreak error messages Documentation/pinctrl: fix a few syntax errors in code examples pinctrl: fix pinconf_pins_show iteration
2012-01-30Merge tag 'tty-3.3-rc1' of ↵Linus Torvalds30-655/+345
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Here are some tty/serial patches for 3.3-rc1 Big thing here is the movement of the 8250 serial drivers to their own directory, now that the patch churn has calmed down. Other than that, only minor stuff (omap patches were reverted as they were found to be wrong), and another broken driver removed from the system. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> * tag 'tty-3.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: serial: Kill off Moorestown code Revert "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA mode" Revert "tty: serial: OMAP: transmit FIFO threshold interrupts don't wake the chip" serial: Fix wakeup init logic to speed up startup docbook: don't use serial_core.h in device-drivers book serial: amba-pl011: lock console writes against interrupts amba-pl011: do not disable RTS during shutdown tty: serial: OMAP: transmit FIFO threshold interrupts don't wake the chip tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA mode omap-serial: make serial_omap_restore_context depend on CONFIG_PM_RUNTIME omap-serial :Make the suspend/resume functions depend on CONFIG_PM_SLEEP. TTY: fix UV serial console regression jsm: Fixed EEH recovery error Updated TTY MAINTAINERS info serial: group all the 8250 related code together
2012-01-30Merge tag 'usb-3.3-rc1' of ↵Linus Torvalds36-2593/+224
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Here are a bunch of USB patches for 3.3-rc1. Nothing major, largest thing here is the removal of some drivers that did not work at all. Other than that, the normal collection of bugfixes and new device ids. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> * tag 'usb-3.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (52 commits) uwb & wusb: fix kconfig error USB: Realtek cr: fix autopm scheduling while atomic USB: ftdi_sio: Add more identifiers xHCI: Cleanup isoc transfer ring when TD length mismatch found usb: musb: omap2430: minor cleanups. qcaux: add more Pantech UML190 and UML290 ports Revert "drivers: usb: Fix dependency for USB_HWA_HCD" usb: mv-otg - Fix build if CONFIG_USB is not set USB: cdc-wdm: Avoid hanging on interface with no USB_CDC_DMM_TYPE usb: add support for STA2X11 host driver drivers: usb: Fix dependency for USB_HWA_HCD kernel-doc: fix new warning in usb.h USB: OHCI: fix new compiler warnings usb: serial: kobil_sct: fix compile warning: drivers/usb/host/ehci-fsl.c: add missing iounmap USB: cdc-wdm: better allocate a buffer that is at least as big as we tell the USB core USB: cdc-wdm: call wake_up_all to allow driver to shutdown on device removal USB: cdc-wdm: use two mutexes to allow simultaneous read and write USB: cdc-wdm: updating desc->length must be protected by spin_lock USB: usbsevseg: fix max length ...
2012-01-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2-3/+3
1) Setting link attributes can modify the size of the attributes that would be reported on a subsequent getlink netlink operation, therefore min_ifinfo_dump_size needs to be adjusted. From Stefan Gula. 2) Resegmentation of TSO frames while trimming can violate invariants expected by callers, namely that the number of segments can only stay the same or decrease, never increase. If MSS changes, however, we can trim data but then end up with more segments. Fix this by only segmenting to the MSS already recorded in the SKB. That's the simplest fix for now and if we want to get more fancy in the future that's a more involved change. This probably explains some retransmit counter inaccuracies. From Neal Cardwell. 3) Fix too-many-wakeups in POLL with AF_UNIX sockets, from Eric Dumazet. 4) Fix CAIF crashes wrt. namespace handling. From Eric Dumazet and Eric W. Biederman. 5) TCP port selection fixes from Flavio Leitner. 6) More socket memory cgroup build fixes in certain randonfig situations. From Glauber Costa. 7) Fix TCP memory sysctl regression reported by Ingo Molnar, also from Glauber Costa. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: af_unix: fix EPOLLET regression for stream sockets tcp: fix tcp_trim_head() to adjust segment count with skb MSS net/tcp: Fix tcp memory limits initialization when !CONFIG_SYSCTL net caif: Register properly as a pernet subsystem. netns: Fail conspicously if someone uses net_generic at an inappropriate time. net: explicitly add jump_label.h header to sock.h net: RTNETLINK adjusting values of min_ifinfo_dump_size ipv6: Fix ip_gre lockless xmits. xen-netfront: correct MAX_TX_TARGET calculation. netns: fix net_alloc_generic() tcp: bind() optimize port allocation tcp: bind() fix autoselection to share ports l2tp: l2tp_ip - fix possible oops on packet receive iwlwifi: fix PCI-E transport "inta" race mac80211: set bss_conf.idle when vif is connected mac80211: update oper_channel on ibss join
2012-01-30Merge tag 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator This fixes an integration issue with the regulator device tree bindings which shook out in -rc. The bindings were overly enthusiatic when deciding to set a voltage on a regulator and would try to set zero volts on an unconfigured regulator which isn't supported. * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: Set apply_uV only when min and max voltages are defined
2012-01-30Merge branch 'for-linus' of ↵Linus Torvalds4-89/+46
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: [S390] dasd: revalidate server for new pathgroup [S390] dasd: revert LCU optimization [S390] cleanup entry point definition
2012-01-30vmwgfx: Fix assignment in vmw_framebuffer_create_handleRyan Mallon1-1/+1
The assignment of handle in vmw_framebuffer_create_handle doesn't actually do anything useful and is incorrectly assigning an integer value to a pointer argument. It appears that this is a typo and should be dereferencing handle rather than assigning to it directly. This fixes a bug where an undefined handle value is potentially returned to user-space. Signed-off-by: Ryan Mallon <rmallon@gmail.com> Reviewed-by: Jakob Bornecrantz<jakob@vmware.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-30drm/radeon/kms: Fix device tree linkage of i2c busesJean Delvare1-0/+1
Properly set the parent device of i2c buses before registering them so that they will show at the right place in the device tree (rather than in /sys/devices directly.) Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Dave Airlie <airlied@gmail.com> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-30drm: Pass the real error code back during GEM bo initialisationChris Wilson1-1/+1
In particular, I found I was hitting the max-file limit in the VFS, and the EFILE was being magically transformed into ENOMEM. Confusion reigns. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-30Revert "drm/i810: cleanup reclaim_buffers"Daniel Vetter3-13/+11
This reverts commit 87499ffdcb1c70f66988cd8febc4ead0ba2f9118. Where is that paper bag ... ah here. I've failed to take an odd interaction between my other cleanups and this reclaim_buffers patch into account and also failed to properly test it. Looks like there are more dragons and hidden trapdoors in the drm release path than actual lines of code. Until I get a clue, let's just revert this. Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-29hwmon: (w83627ehf) Disable setting DC mode for pwm2, pwm3 on NCT6776FGuenter Roeck1-0/+6
NCT6776F only supports pwm mode for pwm2 and pwm3. Return error if an attempt is made to set those pwm channels to DC mode. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Jean Delvare <khali@linux-fr.org> Cc: stable@vger.kernel.org # 3.0+ Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-29hwmon: (sht15) fix bad error codeVivien Didelot1-1/+2
When no platform data was supplied, returned error code was 0. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Cc: stable@vger.kernel.org # 2.6.32+ Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-28Merge tag 'driver-core-3.3-rc1-bugfixes' of ↵Linus Torvalds3-385/+17
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Here are some patches for the 3.3-rc1 tree. It contains the removal of the sysdev code, now that all users of it are gone, as well as some sysfs bugfixes that have been reported by users. There are also some documentation updates here as well. * tag 'driver-core-3.3-rc1-bugfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: sysfs: Complain bitterly about attempts to remove files from nonexistent directories. stable: update documentation to ask for kernel version base/core.c:fix typo in comment in function device_add Documentation: devres: add allocation functions to list of supported calls Documentation update for the driver model core kernel-doc: fix new warnings in driver-core kernel-doc: fix new warnings in debugfs kernel-doc: fix new warnings in device.h driver core: remove drivers/base/sys.c and include/linux/sysdev.h
2012-01-28Merge tag 'for-linus' of git://github.com/rustyrussell/linuxLinus Torvalds1-4/+4
* tag 'for-linus' of git://github.com/rustyrussell/linux: lguest: remove reference from Documentation/virtual/00-INDEX virtio: correct the memory barrier in virtqueue_kick_prepare() virtio: fix typos of memory barriers
2012-01-28Merge branch 'stable/for-linus-fixes-3.3' of ↵Linus Torvalds1-2/+5
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/for-linus-fixes-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/granttable: Disable grant v2 for HVM domains. x86: xen: size struct xen_spinlock to always fit in arch_spinlock_t
2012-01-28Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds10-26/+51
* git://www.linux-watchdog.org/linux-watchdog: watchdog: iTCO_wdt: add Intel Lynx Point DeviceIDs watchdog: via_wdt: Set min_timeout and max_timeout for wdt_dev watchdog: Fix typo "unexpectdly" watchdog: wafer5823wdt: Fix handling WDIOS_DISABLECARD/WDIOS_ENABLECARD options watchdog: wm8350_wdt: Fix handling WDIOS_DISABLECARD/WDIOS_ENABLECARD options watchdog: Return proper error in nuc900wdt_probe if misc_register fails watchdog: Staticise nuc900_wdt watchdog: via_wdt: Staticise wdt_pci_table watchdog: omap_wdt.c: Fix the mismatch of pm_runtime enable and disable watchdog: dw_wdt.c: use devm_request_and_ioremap watchdog: imx2_wdt.c: use devm_request_and_ioremap
2012-01-28Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds7-418/+213
* 'fixes' of git://git.linaro.org/people/rmk/linux-arm: (31 commits) ARM: 7304/1: ioremap: fix boundary check when reusing static mapping ARM: 7301/1: Rename the T() macro to TUSER() to avoid namespace conflicts ARM: 7299/1: ftrace: clear zero bit in reported IPs for Thumb-2 ARM: 7298/1: realview: fix mapping of MPCore private memory region PCMCIA: fix sa1111 oops on remove ARM: 7288/1: mach-sa1100: add missing module_init() call ARM: 7297/1: smp_twd: make sure timer is stopped before registering it ARM: 7296/1: proc-v7.S: remove HARVARD_CACHE preprocessor guards ARM: 7295/1: cortex-a7: move proc_info out of !CONFIG_ARM_LPAE block ARM: 7293/1: logical_cpu_map: decouple CPU mapping from SMP ARM: 7291/1: cache: assume 64-byte L1 cachelines for ARMv7 CPUs ARM: 7290/1: vmlinux.lds.S: align the exception fixup table to a 4-byte boundary ARM: 7289/1: vmlinux.lds.S: do not hardcode cacheline size as 32 bytes MFD: ucb1x00-ts: fix resume failure MFD: ucb1x00-core: fix gpiolib direction_output handling MFD: ucb1x00-core: fix missing restore of io output data on resume MFD: mcp-core: fix mcp_priv() to be more type safe MFD: mcp-core: fix complaints from the genirq layer Revert "ARM: sa11x0: Implement autoloading of codec and codec pdata for mcp bus." Revert "ARM: sa1100: Refactor mcp-sa11x0 to use platform resources." ... Fix up conflict due to arch/arm/mach-mx5/Kconfig having been merged into mach-imx5 (commit 784a90c0a7d8: "ARM i.MX: Merge i.MX5 support into mach-imx"), but the ARM_L1_CACHE_SHIFT_6 entry was moved to be driven by the CPU_V7 logic from it in the old location in rmk's branch (commit a092f2b15399: "ARM: 7291/1: cache: assume 64-byte L1 cachelines for ARMv7 CPUs").
2012-01-28Merge tag 'fixes-for-linus' of ↵Linus Torvalds1-2/+22
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc arm-soc fixes for 3.3-rc: AT91 needed reset fixes which resulted in some minor code refactoring, it also adds a feature-removal for one of their platforms for 3.4. The USB patches have been acked by Greg K-H. i.MX and ux500 both have some minor fixes, nothing controversial. * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arch/arm/mach-imx/mach-mx53_ard.c: add missing iounmap ARM: imx: iomux-v1.h: Fix build error due to __init annotation ARM: at91: Fix at91sam9g45 and at91cap9 reset ARM: at91: make rstc soc independent ARM: at91: introduce AT91_SAM9_ALT_RESET to select the at91sam9 alternative reset ARM: at91: merge at91cap9_ddrsdr.h in at91sam9_ddrsdr.h ARM: at91: fix cap9 ddrsdr register ARM/USB: at91/ohci-at91: rename vbus_pin_inverted to vbus_pin_active_low USB: at91: fix clk_get error handling ARM: at91: removal of CAP9 SoC family ARM: at91: fix at91rm9200 soc subtype handling mach-ux500: no MMC_CAP_SD_HIGHSPEED on Snowball mach-ux500: enable ARM errata 764369 mach-ux500: do not override outer.inv_all mach-ux500: musb: now musb is always in OTG mode ARM: imx6: add missing twd_clk for imx6q clock
2012-01-27Merge branch 'master' of ↵David S. Miller1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2012-01-27PCI/XEN: Fix bug introduced by a recent changeAlan Stern1-1/+1
This patch (as1516) fixes a bug introduced during the removal of put_driver() and get_driver() from drivers/pci/xen-pcifront.c. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2012-01-28virtio: correct the memory barrier in virtqueue_kick_prepare()Jason Wang1-3/+3
Use virtio_mb() to make sure the available index to be exposed before checking the the avail event. Otherwise we may get stale value of avail event in guest and never kick the host after. Note: this fixes a bug introduced by ee7cd8981e15bcb365fc762afe3fc47b8242f630. Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: stable@kernel.org
2012-01-28virtio: fix typos of memory barriersJason Wang1-1/+1
Note: this fixes a bug introduced recently in 7b21e34fd1c272e3a8c3846168f2f6287a4cd72b. Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-27xen/granttable: Disable grant v2 for HVM domains.Konrad Rzeszutek Wilk1-2/+5
As proper scaffolding for supporting error status is not yet implemented. BUG: unable to handle kernel NULL pointer dereference at 0000000000000400 IP: [<ffffffff81375ae9>] gnttab_end_foreign_access_ref_v2+0x29/0x40 PGD 32aa3067 PUD 32a87067 PMD 0 Oops: 0000 [#1] PREEMPT SMP CPU 0 Modules linked in: sg sr_mod cdrom ata_generic ata_piix libata scsi_mod xen_blkfront xen_netfront fb_sys_fops sysimgblt sysfillrect syscopyarea xen_kbdfront cmd Pid: 2307, comm: ip Not tainted 3.3.0-rc1 #1 Xen HVM domU RIP: 0010:[<ffffffff81375ae9>] [<ffffffff81375ae9>] gnttab_end_foreign_access_ref_v2+0x29/0x40 RSP: 0018:ffff88003be03d38 EFLAGS: 00010206 RAX: 0000000000000000 RBX: ffff880033210640 RCX: 0000000000000040 RDX: 0000000000002000 RSI: 0000000000000000 RDI: 0000000000000200 RBP: ffff88003be03d38 R08: 0000000000000101 R09: 0000000000000000 R10: dead000000100100 R11: 0000000000000000 R12: ffff88003be03e48 R13: 0000000000000001 R14: ffff880039461c00 R15: 0000000000000200 FS: 00007fb1f84ec700(0000) GS:ffff88003be00000(0000) knlGS:0000000000000000 ... Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-01-27Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds19-265/+242
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (31 commits) gma500: Fix suspend/resume functions drm/exynos: fixed pm feature for fimd module. MAINTAINERS: added maintainer entry for Exynos DRM Driver. drm/exynos: fixed build dependency for DRM_EXYNOS_FIMD drm/exynos: fix build dependency for DRM_EXYNOS_HDMI drm/exynos: use release_mem_region instead of release_resource agp: fix scratch page cleanup drm/i915: fixup forcewake spinlock fallout in drpc debugfs function drm/i915: debugfs: show semaphore registers also on gen7 drm/i915: allow userspace forcewake references also on gen7 drm/i915: Re-enable gen7 RC6 and GPU turbo after resume. drm/i915: Correct debugfs printout for RC1e. Revert "drm/i915: Work around gen7 BLT ring synchronization issues." drm/i915: rip out the HWSTAM missed irq workaround drm/i915: paper over missed irq issues with force wake voodoo drm/i915: Hold gt_lock across forcewake register reads drm/i915: Hold gt_lock during reset drm/i915: Move reset forcewake processing to gen6_do_reset drm/i915: protect force_wake_(get|put) with the gt_lock drm/i915: convert force_wake_get to func pointer in the gpu reset code ...
2012-01-27gma500: Fix suspend/resume functionsRyan Mallon1-4/+4
Both the suspend and resume functions incorrectly set psbfb = to_psb_fb(NULL) outside of the loop over all of the framebuffers. Fix this by moving the assignment of psbfb inside the loop and removing the initialisation of fb. Signed-off-by: Ryan Mallon <rmallon@gmail.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-27watchdog: iTCO_wdt: add Intel Lynx Point DeviceIDsSeth Heasley1-0/+35
This patch adds the TCO Watchdog DeviceIDs for the Intel Lynx Point PCH. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-27watchdog: via_wdt: Set min_timeout and max_timeout for wdt_devAxel Lin1-2/+2
Let the watchdog core to check the valid value range of min_timeout/max_timeout. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-27watchdog: Fix typo "unexpectdly"Masanari Iida2-2/+2
Correct typo "unexpectdly" to "unexpectedly" in pnx4008_wdt.c and stmp3xxx_wdt.c Signed-off-by: Masanari Iida<standby24x7@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-27watchdog: wafer5823wdt: Fix handling WDIOS_DISABLECARD/WDIOS_ENABLECARD optionsAxel Lin1-2/+2
While receiving WDIOS_DISABLECARD option for WDIOC_SETOPTIONS command, call wafwdt_stop() to disable watchdog. Call wafwdt_start() while receiving WDIOS_ENABLECARD option. Current code has reverse behavior. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-27watchdog: wm8350_wdt: Fix handling WDIOS_DISABLECARD/WDIOS_ENABLECARD optionsAxel Lin1-2/+2
While receiving WDIOS_DISABLECARD option for WDIOC_SETOPTIONS command, call wm8350_wdt_stop() to disable watchdog. Call wm8350_wdt_start() while receiving WDIOS_ENABLECARD option. Current code has reverse behavior. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-27watchdog: Return proper error in nuc900wdt_probe if misc_register failsAxel Lin1-1/+2
Return proper error instead of 0 if misc_register fails Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-27watchdog: Staticise nuc900_wdtAxel Lin1-1/+1
It is only used in this driver, so no need to make the symbol global. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-27watchdog: via_wdt: Staticise wdt_pci_tableAxel Lin1-1/+1
It is only used in this driver, so no need to make the symbol global. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Marc Vertes <marc.vertes@sigfox.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-27watchdog: omap_wdt.c: Fix the mismatch of pm_runtime enable and disableShubhrajyoti D1-0/+2
Currently the watchdog driver calls the pm_runtime_enable and never the disable. This may cause a warning when pm_runtime_enable checks for the count match. Also fixes the error /build/watchdog # insmod omap_wdt.ko [ 44.999389] omap_wdt omap_wdt: Unbalanced pm_runtime_enable! [ 45.011047] OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec /build/watchdog # Attempting to fix the same by calling pm_runtime_disable. Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-27watchdog: dw_wdt.c: use devm_request_and_ioremapJulia Lawall1-5/+1
Reimplement a call to devm_request_mem_region followed by a call to ioremap or ioremap_nocache by a call to devm_request_and_ioremap. The semantic patch that makes this transformation is as follows: (http://coccinelle.lip6.fr/) // <smpl> @nm@ expression myname; identifier i; @@ struct platform_driver i = { .driver = { .name = myname } }; @@ expression dev,res,size; expression nm.myname; @@ -if (!devm_request_mem_region(dev, res->start, size, - \(res->name\|dev_name(dev)\|myname\))) { - ... - return ...; -} ... when != res->start ( -devm_ioremap(dev,res->start,size) +devm_request_and_ioremap(dev,res) | -devm_ioremap_nocache(dev,res->start,size) +devm_request_and_ioremap(dev,res) ) ... when any when != res->start // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-27watchdog: imx2_wdt.c: use devm_request_and_ioremapJulia Lawall1-10/+1
Reimplement a call to devm_request_mem_region followed by a call to ioremap or ioremap_nocache by a call to devm_request_and_ioremap. The variable res_size is then no longer needed. The semantic patch that makes this transformation is as follows: (http://coccinelle.lip6.fr/) // <smpl> @nm@ expression myname; identifier i; @@ struct platform_driver i = { .driver = { .name = myname } }; @@ expression dev,res,size; expression nm.myname; @@ -if (!devm_request_mem_region(dev, res->start, size, - \(res->name\|dev_name(dev)\|myname\))) { - ... - return ...; -} ... when != res->start ( -devm_ioremap(dev,res->start,size) +devm_request_and_ioremap(dev,res) | -devm_ioremap_nocache(dev,res->start,size) +devm_request_and_ioremap(dev,res) ) ... when any when != res->start // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2012-01-27drm/exynos: fixed pm feature for fimd module.Inki Dae1-50/+59
this patch separates fimd specific power on/off function from pm function and the pm interfaces will call that function for power on or off. and also removes unnecessary codes of resume function. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-01-27drm/exynos: fixed build dependency for DRM_EXYNOS_FIMDInki Dae1-1/+1
FB based FIMD and DRM based FIMD drivers use same hardware so with this patch, only one of them would be selected. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-01-27drm/exynos: fix build dependency for DRM_EXYNOS_HDMISeung-Woo Kim1-1/+1
DRM_EXYNOS_HDMI driver and VIDEO_SAMSUNG_S5P_TV driver should be not enabled at once because they use same HW blocks. So dependency for DRM_EXYNOS_HDMI is fixed to check VIDEO_SAMSUNG_S5P_TV=n. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>