summaryrefslogtreecommitdiff
path: root/drivers/dma/ste_dma40_ll.c
AgeCommit message (Collapse)AuthorFilesLines
2016-06-08dmaengine: ste_dma40_ll: make d40_width_to_bits staticBen Dooks1-1/+1
Fix warning due to d40_width_to_bits() not being used outside this file. Fixes: drivers/dma/ste_dma40_ll.c:13:4: warning: symbol 'd40_width_to_bits' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-06-04dmaengine: ste_dma40_ll: Replace meaningless register set with commentLee Jones1-2/+4
Unsure of the author's intentions, rather than just removing the nop, we're replacing it with a comment containing the possible intention of the statement OR:ing with 0. Cc: Dan Williams <djbw@fb.com> Cc: Per Forlin <per.forlin@stericsson.com> Cc: Rabin Vincent <rabin@rab.in> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-04dmaengine: ste_dma40: Convert data_width from register bit format to valueLee Jones1-14/+29
When a DMA client requests and configures a DMA channel, it requests data_width in Bytes. The DMA40 driver then swiftly converts it over to the necessary register bit value. Unfortunately, for any subsequent calculations we have to shift '1' by the bit pattern (1 << data_width) times to make any sense of it. This patch flips the semantics on its head and only converts the value to its respective register bit pattern when writing to registers. This way we can use the true data_width (in Bytes) value. Cc: Dan Williams <djbw@fb.com> Cc: Per Forlin <per.forlin@stericsson.com> Cc: Rabin Vincent <rabin@rab.in> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-04dmaengine: ste_dma40_ll: Use the BIT macro to replace ugly '(1 << x)'sLee Jones1-22/+22
The aim is to make the code that little more readable. Cc: Dan Williams <djbw@fb.com> Cc: Per Forlin <per.forlin@stericsson.com> Cc: Rabin Vincent <rabin@rab.in> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-04dmaengine: ste_dma40: Replace ST-E's home-brew DMA direction defs with ↵Lee Jones1-12/+12
generic ones STEDMA40_*_TO_* direction definitions are identical in all but name to the pre-defined generic DMA_*_TO_* ones. Let's make things easy by not duplicating such things. Cc: Dan Williams <djbw@fb.com> Cc: Per Forlin <per.forlin@stericsson.com> Cc: Rabin Vincent <rabin@rab.in> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-23dmaengine: ste_dma40: Remove unnecessary call to d40_phy_cfg()Lee Jones1-53/+48
The majority of configuration done in d40_phy_config() pertains to physical channels. Move the call over to runtime config which has different code paths for physical and logical channels already, and make it an exclusive physical channel config function as the name implies, and drop the is_log argument. Since we moved the call to runtime_config() it only gets called for device transfers, so encode the small snippet of configuration pertaining to memcpy channels into the d40_config_memcpy() function. Acked-by: Vinod Koul <vinod.koul@intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> [rewrote the commit message] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-23dmaengine: ste_dma40: Separate Logical Global Interrupt Mask (GIM) unmaskingLee Jones1-5/+0
During the initial setup of a logical channel, it is necessary to unmask the GIM in order to receive generated terminal count and error interrupts. We're separating out this required code so it will be possible to move the remaining code in d40_phy_cfg(), which is mostly runtime configuration into the runtime_config() routine. Cc: Dan Williams <djbw@fb.com> Cc: Per Forlin <per.forlin@stericsson.com> Cc: Rabin Vincent <rabin@rab.in> Acked-by: Vinod Koul <vinod.koul@intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-05-23dmaengine: ste_dma40: Amalgamate DMA source and destination channel numbersLee Jones1-2/+2
Devices which utilise DMA use the same device numbers for transmitting and receiving. In this patch we encode the source and destination information into one single attribute. We can subsequently exploit the direction attribute to see which of the transfer directions are being described. This also lessens the burden on platform data. Cc: Dan Williams <djbw@fb.com> Cc: Per Forlin <per.forlin@stericsson.com> Cc: Rabin Vincent <rabin@rab.in> Acked-by: Vinod Koul <vinod.koul@intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-14dmaengine: ste_dma40: minor cosmetic fixesFabio Baltieri1-1/+1
This patch contains various non functional cosmetic fixes. Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
2013-01-14dmaengine: ste_dma40: use writel_relaxed for lcxaPer Forlin1-8/+8
lcpa and lcla are written often and the cache_sync() overhead in writel is costly, especially for wlan where every single network packet (in RX mode) corresponds to a separate DMA transfer. Signed-off-by: Per Forlin <per.forlin@stericsson.com> Reviewed-by: Narayanan Gopalakrishnan <narayanan.gopalakrishnan@stericsson.com> Reviewed-by: Rabin Vincent <rabin.vincent@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
2013-01-14dmaengine: ste_dma40: reset priority bit for logical channelsNarayanan1-5/+6
This patch sets the SSCFG/SDCFG bit[7] PRI only for physical channel requests with high priority. For logical channels, this bit will be zero. Signed-off-by: Narayanan G <narayanan.gopalakrishnan@stericsson.com> Reviewed-by: Rabin Vincent <rabin.vincent@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
2012-11-05ARM: plat-nomadik: move DMA40 header to <linux/platform_data>Linus Walleij1-1/+1
This moves the DMA40 platform data header from <plat/ste_dma40.h> to <linux/platform_data/dma-ste-dma40.h> where is belongs. Cc: Dan Williams <djbw@fb.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Ola Lilja <ola.o.lilja@stericsson.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Andreas Westin <andreas.westin@stericsson.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-01-30dma40: cyclic xfer supportRabin Vincent1-14/+21
Support cyclic transfers, which are useful for ALSA drivers. Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30dma40: use flags to reduce parameter countRabin Vincent1-37/+47
Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30dma40: make d40_log_buf_to_lli staticRabin Vincent1-1/+1
Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30dma40: pass the info pointer all the way to reduce argument countRabin Vincent1-24/+18
Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30dma40: unify d40_log_sg_to_lli funcs for mem and slaveRabin Vincent1-51/+12
Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30dma40: combine duplicated code in log_sg_to_devRabin Vincent1-29/+23
Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30dma40: move lli_load to main source fileRabin Vincent1-26/+0
These register writes are better placed in the main source file rather than ll.c. Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30dma40: implement prep_memcpy as a wrapper around memcpy_sgRabin Vincent1-1/+1
To simplify the code. Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-30dma40: use sg_dma_address() instead of sg_phys()Rabin Vincent1-4/+4
The address to use for DMA should be taken from sg_dma_address() and not sg_phys(). Acked-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-01-04dmaengine: dma40: Add support to split up large elementsPer Forlin1-74/+172
The maximum transfer size of the stedma40 is (64k-1) x data-width. If the transfer size of one element exceeds this limit the job is split up and sent as linked transfer. Signed-off-by: Per Forlin <per.forlin@linaro.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-19ste_dma40: remove enum for endianessRabin Vincent1-2/+4
A bool will suffice. The default is little endian. Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-19ste_dma40: move priority to separate fieldRabin Vincent1-1/+1
And keep it low priority by default. Acked-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-22DMAENGINE: ste_dma40: rewrote LCLA entries allocation codeJonas Aaberg1-106/+55
LLI allocation is now done on job level instead of channel level. Previously the maximum length of a linked job in hw on a logical channel was 8, since the LLIs where evenly divided. Now only executing jobs have allocated LLIs which increase the length to a maximum of 64 links in HW. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-22DMAENGINE: ste_dma40: code clean-upJonas Aaberg1-5/+3
This patch includes non functional code clean up changes, file header updates and a few magic numbers got defined. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-09-22DMAENGINE: ste_dma40: fix bug related to callback handlingJonas Aaberg1-7/+6
The callback got called even when it was not supposed to. Also removed some not needed interrupt trigger on/off code. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-06-22DMAENGINE: ste_dma40: allocate LCLA dynamicallyLinus Walleij1-1/+4
Switch to allocating LCLA in memory instead of having a fixed address. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-06-22DMAENGINE: ste_dma40: interrupts only on dstJonas Aaberg1-7/+4
We don't want interrupts when the source is done, only when the destination is done and everything is complete at the recieveing end of a transfer. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-06-22DMAENGINE: ste_dma40: various cosmetic clean-upsJonas Aaberg1-12/+12
This cleans up some extra newlines, removes some code duplication and moves the code to comply better with checkpatch. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-04-14DMAENGINE: Support for ST-Ericssons DMA40 block v3Linus Walleij1-0/+454
This is a straightforward driver for the ST-Ericsson DMA40 DMA controller found in U8500, implemented akin to the existing COH 901 318 driver. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidh Kasagar <srinidhi.kasagar@stericsson.com> Cc: STEricsson_nomadik_linux@list.st.com Cc: Alessandro Rubini <rubini@unipv.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-28 03:05:40 +0000