summaryrefslogtreecommitdiff
path: root/drivers/devfreq
AgeCommit message (Collapse)AuthorFilesLines
2016-05-03PM / devfreq: style/typo fixesMyungJoo Ham2-4/+2
- Typo in comments fixed - Unnecessary return statement removed Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-05-03PM / devfreq: event: Find the instance of devfreq-event device by using phandleChanwoo Choi1-0/+5
This patch use the phandle to find the instance of devfreq-event device in Device Tree when calling the devfreq_event_get_edev_by_phandle() because there is two type devfreq-event devices as following: First case, exynos-ppmu.c driver provides the maximum four event of each PPMU. So, when getting the instance of devfreq-event device, using the unique name of struct devfreq_event_desc. Second case, exynos-nocp.c driver provide the only one event of each NoC Probe device. So, when getting the instance of devfreq-event device, using the phandle of each NoC probe device. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-05-03PM / devfreq: event: Add new Exynos NoC probe driverChanwoo Choi4-0/+392
This patch adds NoC (Network on Chip) Probe driver which provides the primitive values to get the performance data. The packets that the Network on Chip (NoC) probes detects are transported over the network infrastructure. Exynos542x bus has multiple NoC probes to provide bandwidth information about behavior of the SoC that you can use while analyzing system performance. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Markus Reichl <m.reichl@fivetechno.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-05-03PM / devfreq: exynos: Remove unused exynos4/5 busfreq driverChanwoo Choi8-1828/+0
This patch removes the unused exynos4/5 busfreq driver. Instead, generic exynos-bus frequency driver support the all Exynos SoCs. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-05-03PM / devfreq: exynos: Add support of bus frequency of sub-blocks using ↵Chanwoo Choi2-46/+174
passive governor This patch adds the support of bus frequency feature for sub-blocks which share the one power line. If each bus depends on the power line, each bus is not able to change the voltage by oneself. To optimize the power-consumption on runtime, some buses using the same power line should change the source clock and regulator at the same time. So, this patch uses the passive governor to support the bus frequency for all buses which sharing the one power line. For example, Exynos3250 include the two power line for AXI buses as following: : VDD_MIF : MIF (Memory Interface) provide the DMC (Dynamic Memory Controller) with the power (regulator). : VDD_INT : INT (Internal) provide the various sub-blocks with the power (regulator). Each bus is included in as follwoing block. In the case of VDD_MIF, only DMC bus use the power line. So, there is no any depencency between buese. But, in the case of VDD_INT, various buses share the one power line of VDD_INT. We need to make the depenency between buses. When using passive governor, there is no problem to support the bus frequency as DVFS for all buses. One bus should be operated as the parent bus device which gathering the current load of INT block and then decides the new frequency with some governors except of passive governor. After deciding the new frequency by the parent bus device, the rest bus devices will change the each source clock according to new frequency of the parent bus device. - MIF (Memory Interface) block : VDD_MIF |--- DMC - INT (Internal) block : VDD_INT |--- LEFTBUS (parent) |--- PERIL |--- MFC |--- G3D |--- RIGHTBUS |--- FSYS |--- LCD0 |--- PERIR |--- ISP |--- CAM Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [tjakobi: Reported debugfs error during booting and cw00.choi fix it.] Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-05-03PM / devfreq: Add new passive governorChanwoo Choi3-0/+216
This patch adds the new passive governor for DEVFREQ framework. The following governors are already present and used for DVFS (Dynamic Voltage and Frequency Scaling) drivers. The following governors are independently used for one device driver which don't give the influence to other device drviers and also don't receive the effect from other device drivers. - ondemand / performance / powersave / userspace The passive governor depends on operation of parent driver with specific governos extremely and is not able to decide the new frequency by oneself. According to the decided new frequency of parent driver with governor, the passive governor uses it to decide the appropriate frequency for own device driver. The passive governor must need the following information from device tree: - the source clock and OPP tables - the instance of parent device For exameple, there are one more devfreq device drivers which need to change their source clock according to their utilization on runtime. But, they share the same power line (e.g., regulator). So, specific device driver is operated as parent with ondemand governor and then the rest device driver with passive governor is influenced by parent device. Suggested-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [tjakobi: Reported RCU locking issue and cw00.choi fix it] Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> [linux.amoon: Reported possible recursive locking and cw00.choi fix it] Reported-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-05-03PM / devfreq: Add new DEVFREQ_TRANSITION_NOTIFIER notifierChanwoo Choi1-1/+162
This patch adds the new DEVFREQ_TRANSITION_NOTIFIER notifier to send the notification when the frequency of device is changed. This notifier has two state as following: - DEVFREQ_PRECHANGE : Notify it before chaning the frequency of device - DEVFREQ_POSTCHANGE : Notify it after changed the frequency of device And this patch adds the resourced-managed function to release the resource automatically when error happen. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [m.reichl and linux.amoon: Tested it on exynos4412-odroidu3 board] Tested-by: Markus Reichl <m.reichl@fivetechno.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-05-03PM / devfreq: Add devfreq_get_devfreq_by_phandle()Chanwoo Choi1-0/+44
This patch adds the new devfreq_get_devfreq_by_phandle() OF helper function which can find the instance of devfreq device by using phandle ("devfreq"). Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> [m.reichl and linux.amoon: Tested it on exynos4412-odroidu3 board] Tested-by: Markus Reichl <m.reichl@fivetechno.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-05-03PM / devfreq: exynos: Add generic exynos bus frequency driverChanwoo Choi3-0/+459
This patch adds the generic exynos bus frequency driver for AMBA AXI bus of sub-blocks in exynos SoC with DEVFREQ framework. The Samsung Exynos SoC have the common architecture for bus between DRAM and sub-blocks in SoC. This driver can support the generic bus frequency driver for Exynos SoCs. In devicetree, Each bus block has a bus clock, regulator, operation-point and devfreq-event devices which measure the utilization of each bus block. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [m.reichl and linux.amoon: Tested it on exynos4412-odroidu3 board] Tested-by: Markus Reichl <m.reichl@fivetechno.de> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-03-17PM / devfreq: Spelling s/frequnecy/frequency/Geert Uytterhoeven1-1/+1
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-02-23PM / devfreq: tegra: Set freq in rate callbackTomeu Vizoso1-0/+2
As per the documentation of the devfreq_dev_profile.target callback, set the freq argument to the new frequency before returning. This caused endless messages like this after recent changes in the core: devfreq 6000c800.actmon: Couldn't update frequency transition information. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Reported-by: Tyler Baker <tyler.baker@linaro.org> Tested-by: Thierry Reding <treding@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-01-13PM / devfreq: Do not show statistics if it's not ready.MyungJoo Ham1-0/+2
Before this patch for a device without statistics support, $ cat trans_stat From : To : time(ms) Total transitions : 0 $ After this patch applied for such a device, $ cat trans_stat Not Supported. $ Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-01-13PM / devfreq: Modify the indentation of trans_stat sysfs for readabilityChanwoo Choi1-5/+5
This patch modifies the indentation of 'trans_stat' sysfs to improve readability. The 1GHz is 1000,000,000. So it needs the least 10 position to show the GHz unit. - Before apply this patch, -sh-3.2# cat trans_stat From : To :50000000100000000133000000200000000400000000 time(ms) *50000000: 0 0 0 0 7 1817635 100000000: 4 0 0 0 4 1590 133000000: 1 4 0 0 7 975 200000000: 2 2 7 0 1 2655 400000000: 0 2 5 12 0 1860 Total transition : 58 - After apply this patch, -sh-3.2# cat trans_stat From : To : 50000000 100000000 133000000 200000000 400000000 time(ms) * 50000000: 0 0 0 0 7 14405 100000000: 4 0 0 0 3 2015 133000000: 2 3 0 0 7 1020 200000000: 1 2 7 0 0 2970 400000000: 0 2 5 10 0 1575 Total transition : 53 Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-01-13PM / devfreq: Set the freq_table of devfreq deviceChanwoo Choi1-2/+48
This patch initialize the freq_table array of each devfreq device by using the devfreq_set_freq_table(). If freq_table is NULL, the devfreq framework is not able to support the frequency transtion information through sysfs. The OPP core uses the integer type for the number of opps in the opp list and uses the 'unsigned long' type for each frequency. So, this patch modifies the type of some variable as following: - the type of freq_table : unsigned int -> unsigned long - the type of max_state : unsigned int -> int - Corrected types, format strings, mutex usages by MyungJoo Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-01-13PM / devfreq: Add show_one macro to delete the duplicate codeChanwoo Choi1-11/+9
This patch adds the 'show_one' macro to simplify the duplicate code of both max_freq_show() and min_freq_show(). Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-01-13PM / devfreq: event: Fix the error and warning from script/checkpatch.plChanwoo Choi1-2/+3
This patch just fixes following error and warning by using scripts/checkpatch.pl. - Follwoing issue from checkpatch.pl: ERROR: space prohibited before that close parenthesis ')' + if (count < 0 ) { WARNING: line over 80 characters + ptr = devres_alloc(devm_devfreq_event_release, sizeof(*ptr), GFP_KERNEL); Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2016-01-13PM / devfreq: event: Remove the error log of devfreq_event_get_edev_by_phandle()Chanwoo Choi1-9/+2
This patch just removes the error log when devfreq_event_get_edev_by_phandle() fail to get the instance of devfreq-event device. It is related to sequence of the probe() of each driver. So, this error log might show the always during kernel booting. Each driver using this function can show the appropriate error log. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-10-02PM / devfreq: fix double kfreeGeliang Tang1-2/+1
When device_register() fails, kfree(devfreq) is called already in devfreq_dev_release(), hence there is no need to call kfree(devfreq) in err_dev again. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-09-30PM / devfreq: Fix governor_store()Tobias Jakobi1-1/+3
Writing the currently set governor into sysfs currently seems to fail. Fix this by setting the return code to zero before leaving governor_store(). Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-09-11PM / devfreq: Fix incorrect type issue.Xiaolong Ye1-1/+1
time_in_state in struct devfreq is defined as unsigned long, so devm_kzalloc should use sizeof(unsigned long) as argument instead of sizeof(unsigned int), otherwise it will cause unexpected result in 64bit system. Signed-off-by: Xiaolong Ye <yexl@marvell.com> Signed-off-by: Kevin Liu <kliu5@marvell.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-09-11PM / devfreq: tegra: Update governor to use devfreq_update_stats()MyungJoo Ham1-3/+5
Direct invocation of get_dev_status() is no more recommended. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-09-11PM / devfreq: drop comment about thermal setting max_freqJavi Merino1-3/+3
The thermal infrastructure should use the devfreq cooling device, which uses the OPP library to disable OPPs as necessary. Fix a couple of typos in the same comment while we are at it. Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-09-11PM / devfreq: cache the last call to get_dev_status()Javi Merino1-15/+18
The return value of get_dev_status() can be reused. Cache it so that other parts of the kernel can reuse it instead of having to call the same function again. Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Javi Merino <javi.merino@arm.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-09-11PM / devfreq: Drop unlikely before IS_ERR(_OR_NULL)Viresh Kumar1-2/+2
IS_ERR(_OR_NULL) already contain an 'unlikely' compiler flag and there is no need to do that again from its callers. Drop it. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-09-11PM / devfreq: exynos-ppmu: bit-wise operation bugfix.MyungJoo Ham1-1/+2
Make it u64 before left-shifting 32bits. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-09-11PM / devfreq: exynos-ppmu: Add the support of PPMUv2 for Exynos5433Chanwoo Choi2-7/+233
This patch adds the support for PPMU (Platform Performance Monitoring Unit) version 2.0 for Exynos5433 SoC. Exynos5433 SoC must need PPMUv2 which is quite different from PPMUv1.1. The exynos-ppmu.c driver supports both PPMUv1.1 and PPMUv2. Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-03-31PM / devfreq: tegra: Register governor on module initTomeu Vizoso1-7/+30
So this driver builds as a module. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-03-31PM / devfreq: tegra: Enable interrupts after resuming the devfreq monitorTomeu Vizoso1-2/+2
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-03-31PM / devfreq: tegra: Set drvdata before enabling the irqTomeu Vizoso1-2/+2
To avoid a race in which the interrupt will be handled before the drvdata has been set up. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-03-31PM / devfreq: tegra: remove operating-pointsTomeu Vizoso1-6/+6
As the DT bindings don't have an operating-points property any more, build the OPP table from the frequencies supported by the EMC clock. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-03-31PM / devfreq: tegra: Use clock rate constraintsTomeu Vizoso1-10/+5
Now that we have per-user clocks and the possibility to set constraints in a clock, set a floor constraint on the EMC clock. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-03-31PM / devfreq: tegra: Update to v5 of the submitted patchesTomeu Vizoso1-204/+253
There seemed to be some miscommunication and an old version of the submitted patches was merged. This commit updates the driver to v5, which had this changelog: * Clarify the units of avg_dependency_threshold * Remove unused references to platform_device * Enable and disable interrupts on governor events * Make sure we handle all interrupts for any of the devices we are sampling * Move locking to be per-actmon-device Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> CC: Alex Frid <afrid@nvidia.com> CC: Mikko Perttunen <mikko.perttunen@kapsi.fi> [Added const to device ID by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-03-30PM / devfreq: correct misleading commentMyungJoo Ham1-1/+0
_remove_devfreq() does not have @skip anymore after 3.16. The comment for _remove_devfreq() has been updated correspondingly. Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-03-30PM / devfreq: event: Add const keyword for devfreq_event_ops structureChanwoo Choi1-1/+1
This patch adds the const keyword for devfreq_event_ops structure because the ops of devfreq_event_desc structure should not be changed after initialization. Cc: Myungjoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-02-13Merge branches 'pm-cpufreq', 'pm-cpuidle', 'pm-devfreq', 'pm-opp' and 'pm-tools'Rafael J. Wysocki1-2/+2
* pm-cpufreq: cpufreq: speedstep-smi: enable interrupts when waiting * pm-cpuidle: intel_idle: support additional Broadwell model * pm-devfreq: PM / devfreq: event: testing the wrong variable * pm-opp: PM / OPP / clk: Remove unnecessary OOM message * pm-tools: tools/power turbostat: support additional Broadwell model tools/power turbostat: update parameters, documentation tools/power turbostat: Skip printing disabled package C-states
2015-02-12PM / devfreq: event: testing the wrong variableDan Carpenter1-2/+2
There is a typo here so we test "edev" but we intended to test "edev[i]". Fixes: f262f28c1470 ('PM / devfreq: event: Add devfreq_event class') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-10Merge tag 'pm+acpi-3.20-rc1' of ↵Linus Torvalds8-0/+1723
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management updates from Rafael Wysocki: "We have a few new features this time, including a new SFI-based cpufreq driver, a new devfreq driver for Tegra Activity Monitor, a new devfreq class for providing its governors with raw utilization data and a new ACPI driver for AMD SoCs. Still, the majority of changes here are reworks of existing code to make it more straightforward or to prepare it for implementing new features on top of it. The primary example is the rework of ACPI resources handling from Jiang Liu, Thomas Gleixner and Lv Zheng with support for IOAPIC hotplug implemented on top of it, but there is quite a number of changes of this kind in the cpufreq core, ACPICA, ACPI EC driver, ACPI processor driver and the generic power domains core code too. The most active developer is Viresh Kumar with his cpufreq changes. Specifics: - Rework of the core ACPI resources parsing code to fix issues in it and make using resource offsets more convenient and consolidation of some resource-handing code in a couple of places that have grown analagous data structures and code to cover the the same gap in the core (Jiang Liu, Thomas Gleixner, Lv Zheng). - ACPI-based IOAPIC hotplug support on top of the resources handling rework (Jiang Liu, Yinghai Lu). - ACPICA update to upstream release 20150204 including an interrupt handling rework that allows drivers to install raw handlers for ACPI GPEs which then become entirely responsible for the given GPE and the ACPICA core code won't touch it (Lv Zheng, David E Box, Octavian Purdila). - ACPI EC driver rework to fix several concurrency issues and other problems related to events handling on top of the ACPICA's new support for raw GPE handlers (Lv Zheng). - New ACPI driver for AMD SoCs analogous to the LPSS (Low-Power Subsystem) driver for Intel chips (Ken Xue). - Two minor fixes of the ACPI LPSS driver (Heikki Krogerus, Jarkko Nikula). - Two new blacklist entries for machines (Samsung 730U3E/740U3E and 510R) where the native backlight interface doesn't work correctly while the ACPI one does (Hans de Goede). - Rework of the ACPI processor driver's handling of idle states to make the code more straightforward and less bloated overall (Rafael J Wysocki). - Assorted minor fixes related to ACPI and SFI (Andreas Ruprecht, Andy Shevchenko, Hanjun Guo, Jan Beulich, Rafael J Wysocki, Yaowei Bai). - PCI core power management modification to avoid resuming (some) runtime-suspended devices during system suspend if they are in the right states already (Rafael J Wysocki). - New SFI-based cpufreq driver for Intel platforms using SFI (Srinidhi Kasagar). - cpufreq core fixes, cleanups and simplifications (Viresh Kumar, Doug Anderson, Wolfram Sang). - SkyLake CPU support and other updates for the intel_pstate driver (Kristen Carlson Accardi, Srinivas Pandruvada). - cpufreq-dt driver cleanup (Markus Elfring). - Init fix for the ARM big.LITTLE cpuidle driver (Sudeep Holla). - Generic power domains core code fixes and cleanups (Ulf Hansson). - Operating Performance Points (OPP) core code cleanups and kernel documentation update (Nishanth Menon). - New dabugfs interface to make the list of PM QoS constraints available to user space (Nishanth Menon). - New devfreq driver for Tegra Activity Monitor (Tomeu Vizoso). - New devfreq class (devfreq_event) to provide raw utilization data to devfreq governors (Chanwoo Choi). - Assorted minor fixes and cleanups related to power management (Andreas Ruprecht, Krzysztof Kozlowski, Rickard Strandqvist, Pavel Machek, Todd E Brandt, Wonhong Kwon). - turbostat updates (Len Brown) and cpupower Makefile improvement (Sriram Raghunathan)" * tag 'pm+acpi-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (151 commits) tools/power turbostat: relax dependency on APERF_MSR tools/power turbostat: relax dependency on invariant TSC Merge branch 'pci/host-generic' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci into acpi-resources tools/power turbostat: decode MSR_*_PERF_LIMIT_REASONS tools/power turbostat: relax dependency on root permission ACPI / video: Add disable_native_backlight quirk for Samsung 510R ACPI / PM: Remove unneeded nested #ifdef USB / PM: Remove unneeded #ifdef and associated dead code intel_pstate: provide option to only use intel_pstate with HWP ACPI / EC: Add GPE reference counting debugging messages ACPI / EC: Add query flushing support ACPI / EC: Refine command storm prevention support ACPI / EC: Add command flushing support. ACPI / EC: Introduce STARTED/STOPPED flags to replace BLOCKED flag ACPI: add AMD ACPI2Platform device support for x86 system ACPI / table: remove duplicate NULL check for the handler of acpi_table_parse() ACPI / EC: Update revision due to raw handler mode. ACPI / EC: Reduce ec_poll() by referencing the last register access timestamp. ACPI / EC: Fix several GPE handling issues by deploying ACPI_GPE_DISPATCH_RAW_HANDLER mode. ACPICA: Events: Enable APIs to allow interrupt/polling adaptive request based GPE handling model ...
2015-01-30devfreq: Fix build break of devfreq-event classChanwoo Choi1-0/+1
This patch fixes the build break of the exynos-ppmu driver because Makefile in drivers/devfreq don't include the entry of devfreq-event.c driver. The original patch[1] includes the entry to build devfreq-event.c without the build break. This build break is generated in the process of merging the patch. [1] https://lkml.org/lkml/2015/1/25/579 - [PATCH v10 1/7] devfreq: event: Add new devfreq_event class to provide basic data for devfreq governor CC init/version.o LD init/built-in.o drivers/built-in.o: In function `exynos_ppmu_probe': binder.c:(.text+0x4447ec): undefined reference to `devm_devfreq_event_add_edev' make: *** [vmlinux] Error 1 Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2015-01-30PM / devfreq: event: Add devfreq_event classChanwoo Choi7-0/+993
This patch adds a new class in devfreq, devfreq_event, which provides raw data (e.g., memory bus utilization, GPU utilization) for devfreq governors. - devfreq_event device : Provides raw data for a governor of a devfreq device - devfreq device : Monitors device state and changes frequency/voltage of the device using the raw data from its devfreq_event device. A devfreq device dertermines performance states (normally the frequency and the voltage vlues) based on the results its designtated devfreq governor: e.g., ondemand, performance, powersave. In order to give such results required by a devfreq device, the devfreq governor requires data that indicates the performance requirement given to the devfreq device. The conventional (previous) implementatino of devfreq subsystem requires a devfreq device driver to implement its own mechanism to acquire performance requirement for its governor. However, there had been issues with such requirements: 1. Although performance requirement of such devices is usually acquired from common devices (PMU/PPMU), we do not have any abstract structure to represent them properly. 2. Such performance requirement devices (PMU/PPMU) are actual hardware pieces that may be represented by Device Tree directly while devfreq device itself is a virtual entity that are not considered to be represented by Device Tree according to Device Tree folks. In order to address such issues, a devferq_event device (represented by this patch) provides a template for device drivers representing performance monitoring unit, which gives the basic or raw data for preformance requirement, which in turn, is required by devfreq governors. The following description explains the feature of two kind of devfreq class: - devfreq class (existing) : devfreq consumer device use raw data from devfreq_event device for determining proper current system state and change voltage/frequency dynamically using various governors. - devfreq_event class (new) : Provide measured raw data to devfreq device for governor Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> [Commit message rewritten & conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-29PM / devfreq: tegra: add devfreq driver for Tegra Activity MonitorTomeu Vizoso3-0/+729
The ACTMON block can monitor several counters, providing averaging and firing interrupts based on watermarking configuration. This implementation monitors the MCALL and MCCPU counters to choose an appropriate frequency for the external memory clock. This patch is based on work by Alex Frid <afrid@nvidia.com> and Mikko Perttunen <mikko.perttunen@kapsi.fi>. Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2015-01-06rcu: Make SRCU optional by using CONFIG_SRCUPranith Kumar1-0/+1
SRCU is not necessary to be compiled by default in all cases. For tinification efforts not compiling SRCU unless necessary is desirable. The current patch tries to make compiling SRCU optional by introducing a new Kconfig option CONFIG_SRCU which is selected when any of the components making use of SRCU are selected. If we do not select CONFIG_SRCU, srcu.o will not be compiled at all. text data bss dec hex filename 2007 0 0 2007 7d7 kernel/rcu/srcu.o Size of arch/powerpc/boot/zImage changes from text data bss dec hex filename 831552 64180 23944 919676 e087c arch/powerpc/boot/zImage : before 829504 64180 23952 917636 e0084 arch/powerpc/boot/zImage : after so the savings are about ~2000 bytes. Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> CC: Paul E. McKenney <paulmck@linux.vnet.ibm.com> CC: Josh Triplett <josh@joshtriplett.org> CC: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> [ paulmck: resolve conflict due to removal of arch/ia64/kvm/Kconfig. ]
2014-10-20devfreq: exynos: drop owner assignment from platform_driversWolfram Sang2-2/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-09-29PM / devfreq: exynos: Enable building exynos PPMU as modulePunit Agrawal2-1/+4
Export symbols from the PPMU driver needed to build the exynos bus driver as a module. Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2014-09-29PM / devfreq: Export helper functions for driversÃrjan Eide1-0/+3
These functions are indended for use by drivers and should be available also when the driver is built as a module. Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Ãrjan Eide <orjan.eide@arm.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2014-09-29PM / devfreq: Remove ARCH_HAS_OPP completelyPaul Bolle1-1/+0
The Kconfig symbol ARCH_HAS_OPP became redundant in v3.16: commit 049d595a4db3 ("PM / OPP: Make OPP invisible to users in Kconfig") removed the only dependency that used it. Setting it had no effect anymore. So commit 78c5e0bb145d ("PM / OPP: Remove ARCH_HAS_OPP") removed it. For some reason that commit did not remove all select statements for that symbol. These statements are now useless. Remove one from devfreq too. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2014-07-23PM / OPP: Remove ARCH_HAS_OPPMark Brown1-1/+0
Since the OPP layer is a kernel library which has been converted to be directly selectable by its callers rather than user selectable and requiring architectures to enable it explicitly the ARCH_HAS_OPP symbol has become redundant and can be removed. Do so. Signed-off-by: Mark Brown <broonie@linaro.org> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Nishanth Menon <nm@ti.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Shawn Guo <shawn.guo@freescale.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-24PM / devfreq: remove checks for CONFIG_EXYNOS_ASVPaul Bolle2-15/+5
Checks for CONFIG_EXYNOS_ASV were added in v3.3. But the related Kconfig symbol has never been added to the tree. Remove these checks, as they always evaluate to false. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> [Merge conflict resolved by MyungJoo] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2014-05-24PM / devfreq: exynos5: Use devm_devfreq_* function using device resource ↵Chanwoo Choi1-21/+8
management This patch uses devm_devfreq_add_device()/devm_devfreq_register_opp_notifier() to control automatically the resource of devfreq. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Sachin Kamat <sachin.kamat@linaro.org> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Manish Badarkhe <badarkhe.manish@gmail.com> Cc: Abhilash Kesavan <a.kesavan@samsung.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2014-05-24PM / devfreq: exynos4: Use devm_devfreq_* function using device resource ↵Chanwoo Choi1-15/+4
management This patch uses devm_devfreq_add_device()/devm_devfreq_register_opp_notifier() to control automatically the resource of devfreq. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
2014-05-24PM / devfreq: Add devm_devfreq_{register,unregister}_opp_notfier functionChanwoo Choi1-0/+48
This patch add resource-managed function for devfreq opp as following functions. The devm_devfreq_register_opp_notifier() manages automatically the registration of devfreq opp using device resource management. - devm_devfreq_register_opp_notifier - devm_devfreq_unregister_opp_notifier() Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-23 17:29:59 +0000