summaryrefslogtreecommitdiff
path: root/drivers/clk
AgeCommit message (Collapse)AuthorFilesLines
2016-11-30Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds3-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "Two small fixes for MIPI PLLs on sunxi devices and a build fix for a Broadcom clk driver having unmet dependencies" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: bcm: Fix unmet Kconfig dependencies for CLK_BCM_63XX clk: sunxi-ng: enable so-said LDOs for A33 SoC's pll-mipi clock clk: sunxi-ng: sun6i-a31: Enable PLL-MIPI LDOs when ungating it
2016-11-23clk: bcm: Fix unmet Kconfig dependencies for CLK_BCM_63XXFlorian Fainelli1-1/+1
With commit f4e871509959 ("clk: iproc: Make clocks visible options"), COMMON_CLK_IPROC gained a dependency on ARCH_BCM_IPROC, yet CLK_BCM_63XX also selects that option, this causes the following Kconfig warning: warning: (CLK_BCM_63XX) selects COMMON_CLK_IPROC which has unmet direct dependencies ((ARCH_BCM_IPROC || COMPILE_TEST) && COMMON_CLK) Fix this by adding proper depends for COMMON_CLK_IPROC Fixes: f4e871509959 ("clk: iproc: Make clocks visible options") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> [sboyd@codeaurora.org: Drop default part as it's redundant] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-23clk: sunxi-ng: enable so-said LDOs for A33 SoC's pll-mipi clockIcenowy Zheng1-1/+1
In the user manual of A33 SoC, the bit 22 and 23 of pll-mipi control register is called "LDO{1,2}_EN", and according to the BSP source code from Allwinner [1], the LDOs are enabled during the clock's enabling process. The clock failed to generate output if the two LDOs are not enabled. Add the two bits to the clock's gate bits, so that the LDOs are enabled when the PLL is enabled. [1] https://github.com/allwinner-zh/linux-3.4-sunxi/blob/master/drivers/clk/sunxi/clk-sun8iw5.c#L429 Fixes: d05c748bd730 ("clk: sunxi-ng: Add A33 CCU support") Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-11-21clk: sunxi-ng: sun6i-a31: Enable PLL-MIPI LDOs when ungating itChen-Yu Tsai1-1/+1
The PLL-MIPI clock is somewhat special as it has its own LDOs which need to be turned on for this PLL to actually work and output a clock signal. Add the 2 LDO enable bits to the gate bits. This fixes issues with the TCON not sending vblank interrupts when the tcon and dot clock are indirectly clocked from the PLL-MIPI clock. Fixes: c6e6c96d8fa6 ("clk: sunxi-ng: Add A31/A31s clocks") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-11-16Merge tag 'sunxi-clk-fixes-for-4.9' of ↵Stephen Boyd2-1/+13
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into clk-fixes Pull Allwinner clock fixes from Maxime Ripard: Two fixes, one for the old clock code, one for the new implementation. * tag 'sunxi-clk-fixes-for-4.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: clk: sunxi: Fix M factor computation for APB1 clk: sunxi-ng: sun6i-a31: Force AHB1 clock to use PLL6 as parent
2016-11-16clk: efm32gg: Pass correct type to hw provider registrationStephen Boyd1-1/+1
Dan Carpenter reports that we're passing a pointer to a pointer here when we should just be passing a pointer. Pass the right pointer so that the of_clk_hw_onecell_get() sees the appropriate data pointer on its end. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Stephen Boyd <stephen.boyd@linaro.org> Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Fixes: 9337631f52a8 ("clk: efm32gg: Migrate to clk_hw based OF and registration APIs") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-16clk: berlin: Pass correct type to hw provider registrationStephen Boyd2-2/+2
Dan Carpenter reports that we're passing a pointer to a pointer here when we should just be passing a pointer. Pass the right pointer so that the of_clk_hw_onecell_get() sees the appropriate data pointer on its end. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Jisheng Zhang <jszhang@marvell.com> Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Stephen Boyd <stephen.boyd@linaro.org> Fixes: f6475e298297 ("clk: berlin: Migrate to clk_hw based registration and OF APIs") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-04clk: sunxi: Fix M factor computation for APB1Stéphan Rafin1-1/+1
commit cfa636886033 ("clk: sunxi: factors: Consolidate get_factors parameters into a struct") introduced a regression for m factor computation in sun4i_get_apb1_factors function. The old code reassigned the "parent_rate" parameter to the targeted divisor value and was buggy for the returned frequency but not for the computed factors. Now, returned frequency is good but m factor is incorrectly computed (its max value 31 is always set resulting in a significantly slower frequency than the requested one...) This patch simply restores the original proper computation for m while keeping the good changes for returned rate. Fixes: cfa636886033 ("clk: sunxi: factors: Consolidate get_factors parameters into a struct") Signed-off-by: Stéphan Rafin <stephan@soliotek.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-11-01clk: mmp: pxa910: fix return value check in pxa910_clk_init()Wei Yongjun1-2/+2
Fix the retrn value check which testing the wrong variable in pxa910_clk_init(). Fixes: 2bc61da9f7ff ("clk: mmp: add pxa910 DT support for clock driver") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01clk: mmp: pxa168: fix return value check in pxa168_clk_init()Wei Yongjun1-1/+1
Fix the retrn value check which testing the wrong variable in pxa168_clk_init(). Fixes: ab08aefcd12d ("clk: mmp: add pxa168 DT support for clock driver") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01clk: mmp: mmp2: fix return value check in mmp2_clk_init()Wei Yongjun1-1/+1
Fix the retrn value check which testing the wrong variable in mmp2_clk_init(). Fixes: 1ec770d92a62 ("clk: mmp: add mmp2 DT support for clock driver") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01clk: qoriq: Don't allow CPU clocks higher than starting valueScott Wood1-5/+8
The boot-time frequency of a CPU is considered its rated maximum, as we have no other source of such information. However, this was previously only used for chips with 80% restrictions on secondary PLLs. This usually wasn't a problem because most chips/configs boot with a divider of /1, with other dividers being used only for dynamic frequency reduction. However, at least one config (LS1021A at less than 1 GHz) uses a different divider for top speed. This was causing cpufreq to set a frequency beyond the chip's rated speed. This is fixed by applying a 100%-of-initial-speed limit to all CPU PLLs, similar to the existing 80% limit that only applied to some. Signed-off-by: Scott Wood <oss@buserror.net> Cc: stable@vger.kernel.org Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-11-01Merge tag 'v4.9-rockchip-clkfixes1' of ↵Stephen Boyd1-4/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-fixes Fix return value in error case of new ddrclk type. * tag 'v4.9-rockchip-clkfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: clk: rockchip: don't return NULL when failing to register ddrclk branch
2016-11-01clk: imx: fix integer overflow in AV PLL round rateEmil Lundmark1-2/+6
Since 'parent_rate * mfn' may overflow 32 bits, the result should be stored using 64 bits. The problem was discovered when trying to set the rate of the audio PLL (pll4_post_div) on an i.MX6Q. The desired rate was 196.608 MHz, but the actual rate returned was 192.000570 MHz. The round rate function should have been able to return 196.608 MHz, i.e., the desired rate. Fixes: ba7f4f557eb6 ("clk: imx: correct AV PLL rate formula") Cc: Anson Huang <b20788@freescale.com> Signed-off-by: Emil Lundmark <emil@limesaudio.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-28clk: xgene: Don't call __pa on ioremaped addressLaura Abbott1-6/+4
ioremaped addresses are not linearly mapped so the physical address can not be figured out via __pa. More generally, there is no guarantee that backing value of an ioremapped address is a physical address at all. The value here is only used for debugging so just drop the call to __pa on the ioremapped address. Fixes: 6ae5fd381251 ("clk: xgene: Silence sparse warnings") Signed-off-by: Laura Abbott <labbott@redhat.com> Acked-by: Loc Ho <lho@apm.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-27clk/samsung: Use CLK_OF_DECLARE_DRIVER initialization method for CLKOUTMarek Szyprowski1-8/+14
The Exynos PMU node is an interrupt, clock and PMU (Power Management Unit) controller, and these functionalities are supported by different drivers that matches the same compatible strings. Since commit 989eafd0b609 ("clk: core: Avoid double initialization of clocks") the OF core flags clock controllers registered with the CLK_OF_DECLARE() macro as OF_POPULATED, so platform devices with the same compatible string will not be registered. This prevents the PMU platform device to be created, so the Exynos PMU driver is never probed. This breaks (among other things) Suspend-to-RAM. Fix this by changing CLKOUT driver initialization method to CLK_OF_DECLARE_DRIVER(), which doesn't clear the OF_POPULATED flag, so later a platform device is created and the Exynos PMU platform driver can be be probed properly. Fixes: 989eafd0b609 ("clk: core: Avoid double initialization of clocks") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-20clk: at91: Fix a return value in case of errorChristophe JAILLET1-1/+1
If 'clk_hw_register()' fails, it is likely that we expect to return an error instead of a valid pointer (which would mean success). Fix commit f5644f10dcfb ("clk: at91: Migrate to clk_hw based registration and OF APIs") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-19clk: uniphier: rename MIO clock to SD clock for Pro5, PXs2, LD20 SoCsMasahiro Yamada3-9/+9
I made a mistake as for naming for this block. The MIO block is not implemented for these 3 SoCs in the first place. The current naming will be a trouble if an SoC with both MIO and SD-ctrl blocks appear in the future. This driver has just been merged in the previous merge window. Rename it before the release. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-19clk: uniphier: fix memory overrun bugMasahiro Yamada1-1/+1
The first loop of this "for" statement writes memory beyond the allocated clk_hw_onecell_data. It should be: for (clk_num--; clk_num >= 0; clk_num--) ... Or more simply: while (--clk_num >= 0) ... Fixes: 734d82f4a678 ("clk: uniphier: add core support code for UniPhier clock driver") Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-19clk: sunxi-ng: sun6i-a31: Force AHB1 clock to use PLL6 as parentChen-Yu Tsai1-0/+12
On the A31, the DMA engine only works if AHB1 is clocked from PLL6. In addition, the hstimer is clocked from AHB1, and if AHB1 is clocked from the CPU clock, and cpufreq is working, we get an unstable timer. Force the AHB1 clock to use PLL6 as its parent. Previously this was done in the device tree with the assigned-clocks and assigned-clocks-parent bindings. However with this new monolithic driver, the system critical clocks aren't exported through the device tree. The alternative is to force this setting in the driver before the clocks are registered. This is also done in newer versions of mainline U-boot. But people still using an older version, or even the vendor version, can still hit this issue. Hence the need to do it in the kernel as well. Reported-by: Hans de Goede <hdegoede@redhat.com> Reported-by: Maxime Ripard <maxime.ripard@free-electrons.com> Fixes: c6e6c96d8fa6 ("clk: sunxi-ng: Add A31/A31s clocks") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-10-17clk: hi6220: use CLK_OF_DECLARE_DRIVER for sysctrl and mediactrl clock initShawn Guo1-2/+2
The hi6220-sysctrl and hi6220-mediactrl are not only clock provider but also reset controller. It worked fine that single sysctrl/mediactrl device node in DT can be used to initialize clock driver and populate platform device for reset controller. But it stops working after commit 989eafd0b609 ("clk: core: Avoid double initialization of clocks") gets merged. The commit sets flag OF_POPULATED during clock initialization to skip the platform device populating for the same device node. On hi6220, it effectively makes hi6220-sysctrl reset driver not probe any more. The patch changes hi6220 sysctrl and mediactrl clock init macro from CLK_OF_DECLARE to CLK_OF_DECLARE_DRIVER, so that the reset driver using the same hardware block can continue working. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Tested-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-17clk: mvebu: armada-37xx-periph: Fix the clock gate flagGregory CLEMENT1-0/+1
For the gate part of the peripheral clock setting the bit disables the clock and clearing it enables the clock. This is not the default behavior of clk_gate component, so we need to use the CLK_GATE_SET_TO_DISABLE flag. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Fixes: 8ca4746a78ab ("clk: mvebu: Add the peripheral clock driver for Armada 3700") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-17clk: bcm2835: Clamp the PLL's requested rate to the hardware limits.Eric Anholt1-7/+4
Fixes setting low-resolution video modes on HDMI. Now the PLLH_PIX divider adjusts itself until the PLLH is within bounds. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-17clk: max77686: fix number of clocks setup for clk_hw based registrationJavier Martinez Canillas1-0/+1
The commit 9b4cac33adc7 ("clk: max77686: Migrate to clk_hw based OF and registration APIs") converted the driver to use the new provider API to register clocks using clk_hw. But unfortunately, in the conversion it missed to set the num_clks value which lead to the following error when trying to register a clk provider: [ 1.963782] of_clk_max77686_get: invalid index 0 [ 1.967460] ERROR: could not get clock /rtc@10070000:rtc_src(1) [ 1.973638] s3c-rtc 10070000.rtc: failed to find rtc source clock Fix it by correctly set the max77686_clk_driver_data num_clks member. Fixes: 9b4cac33adc7 ("clk: max77686: Migrate to clk_hw based OF and registration APIs") Reported-by: Markus Reichl <m.reichl@fivetechno.de> Suggested-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Markus Reichl <m.reichl@fivetechno.de> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-17clk: mvebu: armada-37xx-periph: Fix the clock provider registrationGregory CLEMENT1-5/+5
While trying using a peripheral clock on a driver, I saw that the clock pointer returned by the provider was NULL. The problem was a missing indirection. It was the pointer stored in the hws array which needed to be updated not the value it contains. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Fixes: 8ca4746a78ab ("clk: mvebu: Add the peripheral clock driver for Armada 3700") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-17clk: mediatek: Add hardware dependencyJean Delvare1-0/+2
Only propose the mediatek clock drivers on this platform, unless build-testing. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Shunli Wang <shunli.wang@mediatek.com> Cc: James Liao <jamesjj.liao@mediatek.com> Cc: Erin Lo <erin.lo@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Michael Turquette <mturquette@baylibre.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-17clk: samsung: clk-exynos-audss: Fix module autoloadJavier Martinez Canillas1-0/+1
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/clk/samsung/clk-exynos-audss.ko | grep alias alias: platform:exynos-audss-clk After this patch: $ modinfo drivers/clk/samsung/clk-exynos-audss.ko | grep alias alias: platform:exynos-audss-clk alias: of:N*T*Csamsung,exynos5420-audss-clockC* alias: of:N*T*Csamsung,exynos5420-audss-clock alias: of:N*T*Csamsung,exynos5410-audss-clockC* alias: of:N*T*Csamsung,exynos5410-audss-clock alias: of:N*T*Csamsung,exynos5250-audss-clockC* alias: of:N*T*Csamsung,exynos5250-audss-clock alias: of:N*T*Csamsung,exynos4210-audss-clockC* alias: of:N*T*Csamsung,exynos4210-audss-clock Fixes: 4d252fd5719b ("clk: samsung: Allow modular build of the Audio Subsystem CLKCON driver") Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-17clk: uniphier: fix type of variable passed to regmap_read()Masahiro Yamada1-1/+1
The 3rd argument of regmap_read() takes a pointer to unsigned int. This driver is saved just because u32 happens to be typedef'ed as unsigned int, but we should not rely on that fact. Change the variable type just in case. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-17clk: uniphier: add system clock support for sLD3 SoCMasahiro Yamada1-0/+4
I do not know why, but I missed to add this compatible string in the initial commit of this driver. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-10-16clk: rockchip: don't return NULL when failing to register ddrclk branchShawn Lin1-4/+1
rockchip_clk_register_ddrclk should not return NULL when failing to call clk_register, otherwise rockchip_clk_register_branches prints "unknown clock type". The actual case is that it's a known clock type but we fail to register it, which may makes user confuse the reason of failure. And the pr_err here is pointless as rockchip_clk_register_branches will also print the similar message. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2016-10-07Merge tag 'armsoc-late' of ↵Linus Torvalds1-9/+9
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late DT updates from Arnd Bergmann: "These updates have been kept in a separate branch mostly because they rely on updates to the respective clk drivers to keep the shared header files in sync. - The Renesas r8a7796 (R-Car M3-W) platform gets added, this is an automotive SoC similar to the ⅹ8a7795 chip we already support, but the dts changes rely on a clock driver change that has been merged for v4.9 through the clk tree. - The Amlogic meson-gxbb (S905) platform gains support for a few drivers merged through our tree, in particular the network and usb driver changes are required and included here, and also the clk tree changes. - The Allwinner platforms have seen a large-scale change to their clk drivers and the dts file updates must come after that. This includes the newly added Nextthing GR8 platform, which is derived from sun5i/A13. - Some integrator (arm32) changes rely on clk driver changes. - A single patch for lpc32xx has no such dependency but wasn't added until just before the merge window" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits) ARM: dts: lpc32xx: add device node for IRAM on-chip memory ARM: dts: sun8i: Add accelerometer to polaroid-mid2407pxe03 ARM: dts: sun8i: enable UART1 for iNet D978 Rev2 board ARM: dts: sun8i: add pinmux for UART1 at PG dts: sun8i-h3: add I2C0-2 peripherals to H3 SOC dts: sun8i-h3: add pinmux definitions for I2C0-2 dts: sun8i-h3: associate exposed UARTs on Orange Pi Boards dts: sun8i-h3: split off RTS/CTS for UART1 in seperate pinmux dts: sun8i-h3: add pinmux definitions for UART2-3 ARM: dts: sun9i: a80-optimus: Disable EHCI1 ARM: dts: sun9i: cubieboard4: Add AXP806 PMIC device node and regulators ARM: dts: sun9i: a80-optimus: Add AXP806 PMIC device node and regulators ARM: dts: sun9i: cubieboard4: Declare AXP809 SW regulator as unused ARM: dts: sun9i: a80-optimus: Declare AXP809 SW regulator as unused ARM: dts: sun8i: Add touchscreen node for sun8i-a33-ga10h ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2809pxe04 ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2407pxe03 ARM: dts: sun8i: Add touchscreen node for sun8i-a23-inet86dz ARM: dts: sun8i: Add touchscreen node for sun8i-a23-gt90h ARM64: dts: meson-gxbb-vega-s95: Enable USB Nodes ...
2016-10-07Merge tag 'armsoc-drivers' of ↵Linus Torvalds1-0/+70
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC driver updates from Arnd Bergmann: "Driver updates for ARM SoCs, including a couple of newly added drivers: - The Qualcomm external bus interface 2 (EBI2), used in some of their mobile phone chips for connecting flash memory, LCD displays or other peripherals - Secure monitor firmware for Amlogic SoCs, and an NVMEM driver for the EFUSE based on that firmware interface. - Perf support for the AppliedMicro X-Gene performance monitor unit - Reset driver for STMicroelectronics STM32 - Reset driver for SocioNext UniPhier SoCs Aside from these, there are minor updates to SoC-specific bus, clocksource, firmware, pinctrl, reset, rtc and pmic drivers" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits) bus: qcom-ebi2: depend on HAS_IOMEM pinctrl: mvebu: orion5x: Generalise mv88f5181l support for 88f5181 clk: mvebu: Add clk support for the orion5x SoC mv88f5181 dt-bindings: EXYNOS: Add Exynos5433 PMU compatible clocksource: exynos_mct: Add the support for ARM64 perf: xgene: Add APM X-Gene SoC Performance Monitoring Unit driver Documentation: Add documentation for APM X-Gene SoC PMU DTS binding MAINTAINERS: Add entry for APM X-Gene SoC PMU driver bus: qcom: add EBI2 driver bus: qcom: add EBI2 device tree bindings rtc: rtc-pm8xxx: Add support for pm8018 rtc nvmem: amlogic: Add Amlogic Meson EFUSE driver firmware: Amlogic: Add secure monitor driver soc: qcom: smd: Reset rx tail rather than tx memory: atmel-sdramc: fix a possible NULL dereference reset: hi6220: allow to compile test driver on other architectures reset: zynq: add driver Kconfig option reset: sunxi: add driver Kconfig option reset: stm32: add driver Kconfig option reset: socfpga: add driver Kconfig option ...
2016-10-07Merge tag 'armsoc-cleanup' of ↵Linus Torvalds1-41/+5
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Arnd Bergmann: "The cleanups for v4.9 are a little larger that usual, but thankfully that is almost exclusively due to removing a significant number of files that have become obsolete after the still ongoing conversion of old board files to devicetree. - for mach-omap2, which is still the largest platform in arch/arm/, the conversion to DT is finally complete after the Nokia N900 is now fully supported there, along with the omap3 LDP, and we can remove those two board files. If no regressions are found, another large cleanup for the platform will happen as a follow-up, removing dead code and restructuring the platform based on being DT-only. - In mach-imx, similar work is ongoing, but has not come that far. This time, we remove the obsolete board file for the i.MX1 generation, which like i.MX25, i.MX5, i.MX6, and i.MX7 is now DT-only. The remaining board files are for i.MX2 and i.MX3 machines based on old ARM926 or ARM1136 cores that should work with DT in principle. - realview has just been converted from board files to DT, and a lot of code gets removed in the process. This is the last ARM/Keil/Versatile derived platform that was still using board files, the other ones being integrator, versatile and vexpress. We can probably merge the remaining code into a single directory in the near future. - clps711x had completed the conversion in v4.8, but we accidentally left the files in place that should have been deleted then" * tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits) ARM: select PCI_DOMAINS config from ARCH_MULTIPLATFORM ARM: stop *MIGHT_HAVE_PCI* config from being selected redundantly ARM: imx: (trivial) fix typo and grammar ARM: clps711x: remove extraneous files ARM: imx: use IS_ENABLED() instead of checking for built-in or module ARM: OMAP2+: use IS_ENABLED() instead of checking for built-in or module ARM: OMAP1: use IS_ENABLED() instead of checking for built-in or module ARM: imx: remove platform-mxc_rnga ARM: realview: imply device tree boot ARM: realview: no need to select SMP_ON_UP explicitly ARM: realview: delete the RealView board files ARM: imx: no need to select SMP_ON_UP explicitly ARM: i.MX: Move SOC_IMX1 into 'Device tree only' ARM: i.MX: Remove i.MX1 non-DT support ARM: i.MX: Remove i.MX1 Synertronixx SCB9328 board support ARM: i.MX: Remove i.MX1 Armadeus APF9328 board support ARM: mxs: remove obsolete startup code for TX28 ARM: i.MX31 iomux: remove duplicates with alternate name ARM: i.MX31 iomux: remove plain duplicates ARM: OMAP2+: Drop legacy board file for LDP ...
2016-09-23CLK: Add Loongson1C clock supportYang Ling2-0/+98
This patch adds clock support to Loongson1C SoC. Signed-off-by: Yang Ling <gnaygnil@gmail.com> Acked-by: Keguang Zhang <keguang.zhang@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-23clk: Loongson1: Make use of GENMASKKelvin Cheung1-1/+1
Make use of GENMASK instead of open coding the equivalent operation, and update the PLL formula. Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-23clk: Loongson1: Update clocks of Loongson1BKelvin Cheung1-10/+13
This patch updates some clock names of Loongson1B, and adds AC97, DMA and NAND clock. Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-23clk: Loongson1: Refactor Loongson1 clockKelvin Cheung5-48/+69
Factor out the common functions into loongson1/clk.c to support both Loongson1B and Loongson1C. And, put the rest into loongson1/clk-loongson1b.c. Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-23clk: zx296718: register driver earlier with core_initcallShawn Guo1-1/+5
Clock driver should be registered with an earlier initcall than module_init which is used by most of client device drivers. Otherwise, probing of these client drivers will likely be deferred due to that calls into clk API will return -EPROBE_DEFER. Deferred probing is not a problem for most subsystems, but could bring some side effect for particular subsystem, like display. On ZX296718 platform, we get Linux logo and boot log lost from display device, just because the DRM/KMS driver gets -EPROBE_DEFER from devm_clk_get() call. Let's use core_initcall (qcom and a few other clk drivers use that) for driver registration to avoid those unnecessary -EPROBE_DEFER and get rid of the side effect with ZX296718 display system. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-22clk: mvebu: dynamically allocate resources in Armada CP110 system controllerMarcin Wojtas1-9/+20
Original commit, which added support for Armada CP110 system controller used global variables for storing all clock information. It worked fine for Armada 7k SoC, with single CP110 block. After dual-CP110 Armada 8k was introduced, the data got overwritten and corrupted. This patch fixes the issue by allocating resources dynamically in the driver probe and storing it as platform drvdata. Fixes: d3da3eaef7f4 ("clk: mvebu: new driver for Armada CP110 system ...") Signed-off-by: Marcin Wojtas <mw@semihalf.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> CC: <stable@vger.kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-22clk: mvebu: fix setting unwanted flags in CP110 gate clockMarcin Wojtas1-0/+2
Armada CP110 system controller comprises its own routine responsble for registering gate clocks. Among others 'flags' field in struct clk_init_data was not set, using a random values, which may cause an unpredicted behavior. This patch fixes the problem by resetting all fields of clk_init_data before assigning values for all gated clocks of Armada 7k/8k SoCs family. Fixes: d3da3eaef7f4 ("clk: mvebu: new driver for Armada CP110 system ...") Signed-off-by: Marcin Wojtas <mw@semihalf.com> CC: <stable@vger.kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-21clk: nxp: clk-lpc32xx: Unmap region obtained by of_iomapArvind Yadav1-0/+1
Free memory mapping, if lpc32xx_clk_init is not successful. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Vladimir Zapolskiy <vz@mleia.com> Acked-by: Sylvain Lemieux <slemieux.tyco@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-21clk: mvebu: Add clk support for the orion5x SoC mv88f5181Jamie Lentin1-0/+70
Referring to the u-boot sources for the Netgear WNR854T, add support for the mv88f5181. [gregory.clement@free-electrons.com: fix commit title] Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-09-21clk: mediatek: clk-mt8173: Unmap region obtained by of_iomapArvind Yadav1-1/+3
Free memory mapping if init is not successful. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: James Liao <jamesjj.liao@mediatek.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-20clk: sunxi-ng: Fix reset offset for the A23 and A33Maxime Ripard2-16/+16
There's been a copy and paste mistake in the A23 and A33 from the H3, leading in the reset offset for the UART and I2C. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-20clk: at91: sckc: optimize boot timeAlexandre Belloni1-1/+1
Assume that if the oscillator is enabled (OSC32EN bit is present), the delay has already elapsed as the bootloader probably waited for the oscillator to settle. This could waste up to 1.2s. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-20clk: at91: Add sama5d4 sckc supportAlexandre Belloni1-0/+100
Starting with sama5d4, the crystal oscillator is always enabled at startup and the SCKC doesn't have an OSC32EN bit anymore. Add support for that new controller. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-20clk: at91: move slow clock controller clocks to sckc.cAlexandre Belloni3-388/+363
Move all clocks related to the slow clock controller to sckc.c. This avoids extern definitions and allows to remove sckc.h Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> [sboyd@codeaurora.org: Mark some functions static] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-20clk: imx6: initialize GPU clocksLucas Stach1-0/+18
Initialize the GPU clock muxes to sane inputs. Until now they have not been changed from their default values, which means that both GPU3D shader and GPU2D core were fed by clock inputs whose rates exceed the maximium allowed frequency of the cores by as much as 200MHz. This fixes a severe GPU stability issue on i.MX6DL. Cc: stable@vger.kernel.org Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-20clk: imx6: fix i.MX6DL clock tree to reflect realityLucas Stach1-12/+16
The current clock tree only implements the minimal set of differences between the i.MX6Q and the i.MX6DL, but that doesn't really reflect reality. Apply the following fixes to match the RM: - DL has no GPU3D_SHADER_SEL/PODF, the shader domain is clocked by GPU3D_CORE - GPU3D_SHADER_SEL/PODF has been repurposed as GPU2D_CORE_SEL/PODF - GPU2D_CORE_SEL/PODF has been repurposed as MLB_SEL/PODF Cc: stable@vger.kernel.org Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-20clk: imx53: Add clocks configurationKalle Kankare1-0/+20
Add clocks configuration for CSI, FIRI and IEEE1588. Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.co.uk> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-11 13:58:42 +0000