summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-06-11drm/radeon: fix freeze for laptop with Turks/Thames GPU.Jérôme Glisse1-0/+15
Laptop with Turks/Thames GPU will freeze if dpm is enabled. It seems the SMC engine is relying on some state inside the CP engine. CP needs to chew at least one packet for it to get in good state for dynamic power management. This patch simply disabled and re-enable DPM after the ring test which is enough to avoid the freeze. Signed-off-by: Jérôme Glisse <jglisse@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2015-06-11ring-buffer-benchmark: Fix the wrong sched_priority of producerWang Long1-1/+1
The producer should be used producer_fifo as its sched_priority, so correct it. Link: http://lkml.kernel.org/r/1433923957-67842-1-git-send-email-long.wanglong@huawei.com Cc: stable@vger.kernel.org # 2.6.33+ Signed-off-by: Wang Long <long.wanglong@huawei.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2015-06-11ntb: initialize max_mw for Atom before using itDaniel Verkamp1-0/+1
Commit ab760a0 (ntb: Adding split BAR support for Haswell platforms) changed ntb_device's mw from a fixed-size array into a pointer that is allocated based on limits.max_mw; however, on Atom platforms, max_mw is not initialized until ntb_device_setup(), which happens after the allocation. Fill out max_mw in ntb_atom_detect() to match ntb_xeon_detect(); this happens before the use of max_mw in the ndev->mw allocation. Fixes a null pointer dereference on Atom platforms with ntb hardware. v2: fix typo (mw_max should be max_mw) Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com> Acked-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-06-11ALSA: hda - Re-add the lost fake mute supportTakashi Iwai4-2/+34
Yet another regression by the transition to regmap cache; for better usability, we had the fake mute control using the zero amp value for Conexant codecs, and this was forgotten in the new hda core code. Since the bits 4-7 are unused for the amp registers (as we follow the syntax of AMP_GET verb), the bit 4 is now used to indicate the fake mute. For setting this flag, snd_hda_codec_amp_update() becomes a function from a simple macro. The bonus is that it gained a proper function description. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-06-10enic: fix memory leak in rq_cleanGovindarajulu Varadarajan1-5/+4
When incoming packet qualifies for rx_copybreak, we copy the data to newly allocated skb. We do not free/unmap the original buffer. At this point driver assumes this buffer is unallocated. When enic_rq_alloc_buf() is called for buffer allocation, it checks if buf->os_buf is NULL. If its not NULL that means buffer can be re-used. When vnic_rq_clean() is called for freeing all rq buffers, and if the rx_copybreak reused buffer falls outside the used desc, we do not free the buffer. The following trace is observer when dma-debug is enabled. Fix is to walk through complete ring and clean if buffer is present. [ 40.555386] ------------[ cut here ]------------ [ 40.555396] WARNING: CPU: 0 PID: 491 at lib/dma-debug.c:971 dma_debug_device_change+0x188/0x1f0() [ 40.555400] pci 0000:06:00.0: DMA-API: device driver has pending DMA allocations while released from device [count=4] One of leaked entries details: [device address=0x00000000ff4cc040] [size=9018 bytes] [mapped with DMA_FROM_DEVICE] [mapped as single] [ 40.555402] Modules linked in: nfsv3 nfs_acl rpcsec_gss_krb5 auth_rpcgss oid_registry nfsv4 dns_resolver coretemp intel_rapl iosf_mbi x86_pkg_temp_thermal intel_powerclamp kvm_intel kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel aes_x86_64 lrw joydev mousedev gf128mul hid_generic glue_helper mgag200 usbhid ttm hid drm_kms_helper drm ablk_helper syscopyarea sysfillrect sysimgblt i2c_algo_bit i2c_core iTCO_wdt cryptd mac_hid evdev pcspkr sb_edac edac_core tpm_tis iTCO_vendor_support ipmi_si wmi tpm ipmi_msghandler shpchp lpc_ich processor acpi_power_meter hwmon button ac sch_fq_codel nfs lockd grace sunrpc fscache sd_mod ehci_pci ehci_hcd megaraid_sas usbcore scsi_mod usb_common enic(-) crc32c_generic crc32c_intel btrfs xor raid6_pq ext4 crc16 mbcache jbd2 [ 40.555467] CPU: 0 PID: 491 Comm: rmmod Not tainted 4.1.0-rc7-ARCH-01305-gf59b71f #118 [ 40.555469] Hardware name: Cisco Systems Inc UCSB-B200-M4/UCSB-B200-M4, BIOS B200M4.2.2.2.23.061220140128 06/12/2014 [ 40.555471] 0000000000000000 00000000e2f8a5b7 ffff880275f8bc48 ffffffff8158d6f0 [ 40.555474] 0000000000000000 ffff880275f8bca0 ffff880275f8bc88 ffffffff8107b04a [ 40.555477] ffff8802734e0000 0000000000000004 ffff8804763fb3c0 ffff88027600b650 [ 40.555480] Call Trace: [ 40.555488] [<ffffffff8158d6f0>] dump_stack+0x4f/0x7b [ 40.555492] [<ffffffff8107b04a>] warn_slowpath_common+0x8a/0xc0 [ 40.555494] [<ffffffff8107b0d5>] warn_slowpath_fmt+0x55/0x70 [ 40.555498] [<ffffffff812fa408>] dma_debug_device_change+0x188/0x1f0 [ 40.555503] [<ffffffff8109aaef>] notifier_call_chain+0x4f/0x80 [ 40.555506] [<ffffffff8109aecb>] __blocking_notifier_call_chain+0x4b/0x70 [ 40.555510] [<ffffffff8109af06>] blocking_notifier_call_chain+0x16/0x20 [ 40.555514] [<ffffffff813f8066>] __device_release_driver+0xf6/0x120 [ 40.555518] [<ffffffff813f8b08>] driver_detach+0xc8/0xd0 [ 40.555523] [<ffffffff813f7c59>] bus_remove_driver+0x59/0xe0 [ 40.555527] [<ffffffff813f93a0>] driver_unregister+0x30/0x70 [ 40.555534] [<ffffffff8131532d>] pci_unregister_driver+0x2d/0xa0 [ 40.555542] [<ffffffffa0200ec2>] enic_cleanup_module+0x10/0x14e [enic] [ 40.555547] [<ffffffff8110158f>] SyS_delete_module+0x1cf/0x280 [ 40.555551] [<ffffffff811e284e>] ? ____fput+0xe/0x10 [ 40.555554] [<ffffffff810980ec>] ? task_work_run+0xbc/0xf0 [ 40.555558] [<ffffffff815930ee>] system_call_fastpath+0x12/0x71 [ 40.555561] ---[ end trace 4988cadc77c2b236 ]--- [ 40.555562] Mapped at: [ 40.555563] [<ffffffff812fa865>] debug_dma_map_page+0x95/0x150 [ 40.555566] [<ffffffffa01f4a88>] enic_rq_alloc_buf+0x1b8/0x360 [enic] [ 40.555570] [<ffffffffa01f7658>] enic_open+0xf8/0x820 [enic] [ 40.555574] [<ffffffff8148d50e>] __dev_open+0xce/0x150 [ 40.555579] [<ffffffff8148d851>] __dev_change_flags+0xa1/0x170 Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10enic: check return value for stat dumpGovindarajulu Varadarajan2-4/+25
We do not check the return value of enic_dev_stats_dump(). If allocation fails, we will hit NULL pointer reference. Return only if memory allocation fails. For other failures, we return the previously recorded values. Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10enic: unlock napi busy poll before unmasking intrGovindarajulu Varadarajan1-1/+1
There is a small window between vnic_intr_unmask() and enic_poll_unlock_napi(). In this window if an irq occurs and napi is scheduled on different cpu, it tries to acquire enic_poll_lock_napi() and hits the following WARN_ON message. Fix is to unlock napi_poll before unmasking the interrupt. [ 781.121746] ------------[ cut here ]------------ [ 781.121789] WARNING: CPU: 1 PID: 0 at drivers/net/ethernet/cisco/enic/vnic_rq.h:228 enic_poll_msix_rq+0x36a/0x3c0 [enic]() [ 781.121834] Modules linked in: nfsv3 nfs_acl rpcsec_gss_krb5 auth_rpcgss oid_registry nfsv4 dns_resolver coretemp intel_rapl iosf_mbi x86_pkg_temp_thermal intel_powerclamp kvm_intel kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel mgag200 ttm drm_kms_helper joydev aes_x86_64 lrw drm gf128mul mousedev glue_helper sb_edac ablk_helper iTCO_wdt iTCO_vendor_support evdev ipmi_si syscopyarea sysfillrect sysimgblt i2c_algo_bit i2c_core edac_core lpc_ich mac_hid cryptd pcspkr ipmi_msghandler shpchp tpm_tis acpi_power_meter tpm wmi processor hwmon button ac sch_fq_codel nfs lockd grace sunrpc fscache hid_generic usbhid hid ehci_pci ehci_hcd sd_mod megaraid_sas usbcore scsi_mod usb_common enic crc32c_generic crc32c_intel btrfs xor raid6_pq ext4 crc16 mbcache jbd2 [ 781.122176] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.1.0-rc6-ARCH-00040-gc46a024-dirty #106 [ 781.122210] Hardware name: Cisco Systems Inc UCSB-B200-M4/UCSB-B200-M4, BIOS B200M4.2.2.2.23.061220140128 06/12/2014 [ 781.122252] 0000000000000000 bddbbc9d655ec96e ffff880277e43da8 ffffffff81583fe8 [ 781.122286] 0000000000000000 0000000000000000 ffff880277e43de8 ffffffff8107acfa [ 781.122319] ffff880272c01000 ffff880273f18000 ffff880273f1a100 0000000000000000 [ 781.122352] Call Trace: [ 781.122364] <IRQ> [<ffffffff81583fe8>] dump_stack+0x4f/0x7b [ 781.122399] [<ffffffff8107acfa>] warn_slowpath_common+0x8a/0xc0 [ 781.122425] [<ffffffff8107ae2a>] warn_slowpath_null+0x1a/0x20 [ 781.122455] [<ffffffffa01fa9ca>] enic_poll_msix_rq+0x36a/0x3c0 [enic] [ 781.122487] [<ffffffff8148525a>] net_rx_action+0x22a/0x370 [ 781.122512] [<ffffffff8107ed3d>] __do_softirq+0xed/0x2d0 [ 781.122537] [<ffffffff8107f06e>] irq_exit+0x7e/0xa0 [ 781.122560] [<ffffffff8158c424>] do_IRQ+0x64/0x100 [ 781.122582] [<ffffffff8158a42e>] common_interrupt+0x6e/0x6e [ 781.122605] <EOI> [<ffffffff810bd331>] ? cpu_startup_entry+0x121/0x480 [ 781.122638] [<ffffffff810bd2fc>] ? cpu_startup_entry+0xec/0x480 [ 781.122667] [<ffffffff810f2ed3>] ? clockevents_register_device+0x113/0x1f0 [ 781.122698] [<ffffffff81050ab6>] start_secondary+0x196/0x1e0 [ 781.122723] ---[ end trace cec2e9dd3af7b9db ]--- Signed-off-by: Govindarajulu Varadarajan <_govind@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10net, swap: Remove a warning and clarify why sk_mem_reclaim is required when ↵Mel Gorman1-8/+5
deactivating swap Jeff Layton reported the following; [ 74.232485] ------------[ cut here ]------------ [ 74.233354] WARNING: CPU: 2 PID: 754 at net/core/sock.c:364 sk_clear_memalloc+0x51/0x80() [ 74.234790] Modules linked in: cts rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache xfs libcrc32c snd_hda_codec_generic snd_hda_intel snd_hda_controller snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device nfsd snd_pcm snd_timer snd e1000 ppdev parport_pc joydev parport pvpanic soundcore floppy serio_raw i2c_piix4 pcspkr nfs_acl lockd virtio_balloon acpi_cpufreq auth_rpcgss grace sunrpc qxl drm_kms_helper ttm drm virtio_console virtio_blk virtio_pci ata_generic virtio_ring pata_acpi virtio [ 74.243599] CPU: 2 PID: 754 Comm: swapoff Not tainted 4.1.0-rc6+ #5 [ 74.244635] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 74.245546] 0000000000000000 0000000079e69e31 ffff8800d066bde8 ffffffff8179263d [ 74.246786] 0000000000000000 0000000000000000 ffff8800d066be28 ffffffff8109e6fa [ 74.248175] 0000000000000000 ffff880118d48000 ffff8800d58f5c08 ffff880036e380a8 [ 74.249483] Call Trace: [ 74.249872] [<ffffffff8179263d>] dump_stack+0x45/0x57 [ 74.250703] [<ffffffff8109e6fa>] warn_slowpath_common+0x8a/0xc0 [ 74.251655] [<ffffffff8109e82a>] warn_slowpath_null+0x1a/0x20 [ 74.252585] [<ffffffff81661241>] sk_clear_memalloc+0x51/0x80 [ 74.253519] [<ffffffffa0116c72>] xs_disable_swap+0x42/0x80 [sunrpc] [ 74.254537] [<ffffffffa01109de>] rpc_clnt_swap_deactivate+0x7e/0xc0 [sunrpc] [ 74.255610] [<ffffffffa03e4fd7>] nfs_swap_deactivate+0x27/0x30 [nfs] [ 74.256582] [<ffffffff811e99d4>] destroy_swap_extents+0x74/0x80 [ 74.257496] [<ffffffff811ecb52>] SyS_swapoff+0x222/0x5c0 [ 74.258318] [<ffffffff81023f27>] ? syscall_trace_leave+0xc7/0x140 [ 74.259253] [<ffffffff81798dae>] system_call_fastpath+0x12/0x71 [ 74.260158] ---[ end trace 2530722966429f10 ]--- The warning in question was unnecessary but with Jeff's series the rules are also clearer. This patch removes the warning and updates the comment to explain why sk_mem_reclaim() may still be called. [jlayton: remove if (sk->sk_forward_alloc) conditional. As Leon points out that it's not needed.] Cc: Leon Romanovsky <leon@leon.nu> Signed-off-by: Mel Gorman <mgorman@suse.de> Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10bridge: fix multicast router rlist endless loopNikolay Aleksandrov1-4/+3
Since the addition of sysfs multicast router support if one set multicast_router to "2" more than once, then the port would be added to the hlist every time and could end up linking to itself and thus causing an endless loop for rlist walkers. So to reproduce just do: echo 2 > multicast_router; echo 2 > multicast_router; in a bridge port and let some igmp traffic flow, for me it hangs up in br_multicast_flood(). Fix this by adding a check in br_multicast_add_router() if the port is already linked. The reason this didn't happen before the addition of multicast_router sysfs entries is because there's a !hlist_unhashed check that prevents it. Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Fixes: 0909e11758bd ("bridge: Add multicast_router sysfs entries") Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10tipc: disconnect socket directly after probe failureErik Hugne1-5/+11
If the TIPC connection timer expires in a probing state, a self abort message is supposed to be generated and delivered to the local socket. This is currently broken, and the abort message is actually sent out to the peer node with invalid addressing information. This will cause the link to enter a constant retransmission state and eventually reset. We fix this by removing the self-abort message creation and tear down connection immediately instead. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-11ALSA: hda - Continue probing even if i915 binding failsTakashi Iwai1-1/+2
Currently snd-hda-intel driver aborts the probing of Intel HD-audio controller with i915 power well management when binding with i915 driver via hda_i915_init() fails. This is no big problem for Haswell and Broadwell where the HD-audio controllers are dedicated to HDMI/DP, thus i915 link is mandatory. However, Skylake, Baytrail and Braswell have only one controller and both HDMI/DP and analog codecs share the same bus. Thus, even if HDMI/DP isn't usable, we should keep the controller working for other codecs. For fixing this, this patch simply allows continuing the probing even if hda_i915_init() call fails. This may leave stale sound components for HDMI/DP devices that are unbound with graphics. We could abort the probing selectively, but from the code simplicity POV, it's better to continue in all cases. Reported-by: Libin Yang <libin.yang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-06-10Merge tag 'misc-for-linus-4.1-rc8' of ↵Linus Torvalds2-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull misc fixes from Guenter Roeck: "There are two patches here. One fixes a build error affecting the blackfin architecture, the other fixes a build error affecting the score architecture. The score maintainer (Lennox Wu) has a hard time sending you the score patch, and the blackfin maintainer (Steven Miao) has been silent since -rc1. Since 4.1 is about to be released, I figured it would be useful to get the patches upstream to avoid the related build failures in the final release" * tag 'misc-for-linus-4.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: score: Fix exception handler label blackfin: Fix build error
2015-06-10Merge branch 'akpm' (patches from Andrew)Linus Torvalds7-15/+20
Merge misc fixes from Andrew Morton: "The gcc-4.4.4 workaround has actually been merged into a KVM tree by Paolo but it is stuck in linux-next and mainline needs it" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: arch/x86/kvm/mmu.c: work around gcc-4.4.4 bug sched, numa: do not hint for NUMA balancing on VM_MIXEDMAP mappings zsmalloc: fix a null pointer dereference in destroy_handle_cache() mm: memcontrol: fix false-positive VM_BUG_ON() on -rt checkpatch: fix "GLOBAL_INITIALISERS" test zram: clear disk io accounting when reset zram device memcg: do not call reclaim if !__GFP_WAIT mm/memory_hotplug.c: set zone->wait_table to null after freeing it
2015-06-10arch/x86/kvm/mmu.c: work around gcc-4.4.4 bugAndrew Morton1-7/+7
Fix this compile issue with gcc-4.4.4: arch/x86/kvm/mmu.c: In function 'kvm_mmu_pte_write': arch/x86/kvm/mmu.c:4256: error: unknown field 'cr0_wp' specified in initializer arch/x86/kvm/mmu.c:4257: error: unknown field 'cr4_pae' specified in initializer arch/x86/kvm/mmu.c:4257: warning: excess elements in union initializer ... gcc-4.4.4 (at least) has issues when using anonymous unions in initializers. Fixes: edc90b7dc4ceef6 ("KVM: MMU: fix SMAP virtualization") Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-10sched, numa: do not hint for NUMA balancing on VM_MIXEDMAP mappingsMel Gorman1-1/+1
Jovi Zhangwei reported the following problem Below kernel vm bug can be triggered by tcpdump which mmaped a lot of pages with GFP_COMP flag. [Mon May 25 05:29:33 2015] page:ffffea0015414000 count:66 mapcount:1 mapping: (null) index:0x0 [Mon May 25 05:29:33 2015] flags: 0x20047580004000(head) [Mon May 25 05:29:33 2015] page dumped because: VM_BUG_ON_PAGE(compound_order(page) && !PageTransHuge(page)) [Mon May 25 05:29:33 2015] ------------[ cut here ]------------ [Mon May 25 05:29:33 2015] kernel BUG at mm/migrate.c:1661! [Mon May 25 05:29:33 2015] invalid opcode: 0000 [#1] SMP In this case it was triggered by running tcpdump but it's not necessary reproducible on all systems. sudo tcpdump -i bond0.100 'tcp port 4242' -c 100000000000 -w 4242.pcap Compound pages cannot be migrated and it was not expected that such pages be marked for NUMA balancing. This did not take into account that drivers such as net/packet/af_packet.c may insert compound pages into userspace with vm_insert_page. This patch tells the NUMA balancing protection scanner to skip all VM_MIXEDMAP mappings which avoids the possibility that compound pages are marked for migration. Signed-off-by: Mel Gorman <mgorman@suse.de> Reported-by: Jovi Zhangwei <jovi@cloudflare.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-10zsmalloc: fix a null pointer dereference in destroy_handle_cache()Sergey Senozhatsky1-1/+2
If zs_create_pool()->create_handle_cache()->kmem_cache_create() or pool->name allocation fails, zs_create_pool()->destroy_handle_cache() will dereference the NULL pool->handle_cachep. Modify destroy_handle_cache() to avoid this. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-10mm: memcontrol: fix false-positive VM_BUG_ON() on -rtJohannes Weiner1-3/+1
On -rt, the VM_BUG_ON(!irqs_disabled()) triggers inside the memcg swapout path because the spin_lock_irq(&mapping->tree_lock) in the caller doesn't actually disable the hardware interrupts - which is fine, because on -rt the tophalves run in process context and so we are still safe from preemption while updating the statistics. Remove the VM_BUG_ON() but keep the comment of what we rely on. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Clark Williams <williams@redhat.com> Cc: Fernando Lopez-Lezcano <nando@ccrma.Stanford.EDU> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-10checkpatch: fix "GLOBAL_INITIALISERS" testJoe Perches1-2/+2
Commit d5e616fc1c1d ("checkpatch: add a few more --fix corrections") broke the GLOBAL_INITIALISERS test with bad parentheses and optional leading spaces. Fix it. Signed-off-by: Joe Perches <joe@perches.com> Reported-by: Bandan Das <bsd@makefile.in> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-10zram: clear disk io accounting when reset zram deviceWeijie Yang1-0/+2
Clear zram disk io accounting when resetting the zram device. Otherwise the residual io accounting stat will affect the diskstat in the next zram active cycle. Signed-off-by: Weijie Yang <weijie.yang@samsung.com> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Minchan Kim <minchan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-10memcg: do not call reclaim if !__GFP_WAITVladimir Davydov1-0/+2
When trimming memcg consumption excess (see memory.high), we call try_to_free_mem_cgroup_pages without checking if we are allowed to sleep in the current context, which can result in a deadlock. Fix this. Fixes: 241994ed8649 ("mm: memcontrol: default hierarchy interface for memory") Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Michal Hocko <mhocko@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-10mm/memory_hotplug.c: set zone->wait_table to null after freeing itGu Zheng1-1/+3
Izumi found the following oops when hot re-adding a node: BUG: unable to handle kernel paging request at ffffc90008963690 IP: __wake_up_bit+0x20/0x70 Oops: 0000 [#1] SMP CPU: 68 PID: 1237 Comm: rs:main Q:Reg Not tainted 4.1.0-rc5 #80 Hardware name: FUJITSU PRIMEQUEST2800E/SB, BIOS PRIMEQUEST 2000 Series BIOS Version 1.87 04/28/2015 task: ffff880838df8000 ti: ffff880017b94000 task.ti: ffff880017b94000 RIP: 0010:[<ffffffff810dff80>] [<ffffffff810dff80>] __wake_up_bit+0x20/0x70 RSP: 0018:ffff880017b97be8 EFLAGS: 00010246 RAX: ffffc90008963690 RBX: 00000000003c0000 RCX: 000000000000a4c9 RDX: 0000000000000000 RSI: ffffea101bffd500 RDI: ffffc90008963648 RBP: ffff880017b97c08 R08: 0000000002000020 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8a0797c73800 R13: ffffea101bffd500 R14: 0000000000000001 R15: 00000000003c0000 FS: 00007fcc7ffff700(0000) GS:ffff880874800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc90008963690 CR3: 0000000836761000 CR4: 00000000001407e0 Call Trace: unlock_page+0x6d/0x70 generic_write_end+0x53/0xb0 xfs_vm_write_end+0x29/0x80 [xfs] generic_perform_write+0x10a/0x1e0 xfs_file_buffered_aio_write+0x14d/0x3e0 [xfs] xfs_file_write_iter+0x79/0x120 [xfs] __vfs_write+0xd4/0x110 vfs_write+0xac/0x1c0 SyS_write+0x58/0xd0 system_call_fastpath+0x12/0x76 Code: 5d c3 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 48 83 ec 20 65 48 8b 04 25 28 00 00 00 48 89 45 f8 31 c0 48 8d 47 48 <48> 39 47 48 48 c7 45 e8 00 00 00 00 48 c7 45 f0 00 00 00 00 48 RIP [<ffffffff810dff80>] __wake_up_bit+0x20/0x70 RSP <ffff880017b97be8> CR2: ffffc90008963690 Reproduce method (re-add a node):: Hot-add nodeA --> remove nodeA --> hot-add nodeA (panic) This seems an use-after-free problem, and the root cause is zone->wait_table was not set to *NULL* after free it in try_offline_node. When hot re-add a node, we will reuse the pgdat of it, so does the zone struct, and when add pages to the target zone, it will init the zone first (including the wait_table) if the zone is not initialized. The judgement of zone initialized is based on zone->wait_table: static inline bool zone_is_initialized(struct zone *zone) { return !!zone->wait_table; } so if we do not set the zone->wait_table to *NULL* after free it, the memory hotplug routine will skip the init of new zone when hot re-add the node, and the wait_table still points to the freed memory, then we will access the invalid address when trying to wake up the waiting people after the i/o operation with the page is done, such as mentioned above. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Reported-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Reviewed by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-10Revert "ipv6: Fix protocol resubmission"David S. Miller1-5/+3
This reverts commit 0243508edd317ff1fa63b495643a7c192fbfcd92. It introduces new regressions. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-10score: Fix exception handler labelGuenter Roeck1-1/+1
The latest version of modinfo fails to compile score architecture targets with the following error. FATAL: The relocation at __ex_table+0x634 references section "__ex_table" which is not executable, IOW the kernel will fault if it ever tries to jump to it. Something is seriously wrong and should be fixed. The probem is caused by a bad label in an __ex_table entry. Acked-by: Lennox Wu <lennox.wu@gmail.com> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-06-10blackfin: Fix build errorGuenter Roeck1-0/+1
Fix include/asm-generic/io.h: In function 'readb': include/asm-generic/io.h:113:2: error: implicit declaration of function 'bfin_read8' include/asm-generic/io.h: In function 'readw': include/asm-generic/io.h:121:2: error: implicit declaration of function 'bfin_read16' include/asm-generic/io.h: In function 'readl': include/asm-generic/io.h:129:2: error: implicit declaration of function 'bfin_read32' include/asm-generic/io.h: In function 'writeb': include/asm-generic/io.h:147:2: error: implicit declaration of function 'bfin_write8' include/asm-generic/io.h: In function 'writew': include/asm-generic/io.h:155:2: error: implicit declaration of function 'bfin_write16' include/asm-generic/io.h: In function 'writel': include/asm-generic/io.h:163:2: error: implicit declaration of function 'bfin_write32' Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Fixes: 1a3372bc522ef ("blackfin: io: define __raw_readx/writex with bfin_readx/writex") Cc: Steven Miao <realmz6@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2015-06-10MIPS: MSA: bugfix - disable MSA correctly for new threads/processes.Ralf Baechle1-1/+1
Due to the slightly odd way that new threads and processes start execution when scheduled for the very first time they were bypassing the required disable_msa call. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-10MIPS: Loongson: Do not register 8250 platform device from module.Ralf Baechle1-3/+1
If CONFIG_SERIAL_8250 is set to m, the Loongson seria.ko module might get unloaded while the serial driver modules are still loaded resulting in stale references to the destroyed platform_device instance. Anyway, platform devices should always be registered indicated what devices are present, _not_ what drivers have been configured. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com> Patchwork: https://patchwork.linux-mips.org/patch/10538/
2015-06-10MIPS: Cobalt: Do not build MTD platform device registration code as module.Ralf Baechle1-2/+1
If CONFIG_MTD_PHYSMAP is set to m, the Cobalt mtd.ko module might get unloaded while the drivers/mtd modules are still loaded resulting in stale references to the destroyed platform_device instance. Anyway, platform devices should always be registered indicated what devices are present, _not_ what drivers have been configured. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-10ALSA: hda - Don't actually write registers for caps overwritesTakashi Iwai1-0/+3
Along with the transition to regmap for managing the cached parameter reads, the caps overwrite was also moved to regmap cache. The cache change itself works, but it still tries to write the non-existing verb (the HDA parameter is read-only) wrongly. It's harmless in most cases, but some chips are picky and may result in the codec communication stall. This patch avoids it just by adding the missing flag check in reg_write ops. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-06-09Merge branch 'for-linus' of ↵Linus Torvalds1-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input layer fix from Dmitry Torokhov: "A small tweak for the Synaptics PS/2 touchpad driver" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: synaptics - add min/max quirk for Lenovo S540
2015-06-09blk-mq: free hctx->ctxs in queue's release handlerMing Lei1-2/+6
Now blk_cleanup_queue() can be called before calling del_gendisk()[1], inside which hctx->ctxs is touched from blk_mq_unregister_hctx(), but the variable has been freed by blk_cleanup_queue() at that time. So this patch moves freeing of hctx->ctxs into queue's release handler for fixing the oops reported by Stefan. [1], 6cd18e711dd8075 (block: destroy bdi before blockdev is unregistered) Reported-by: Stefan Seyfried <stefan.seyfried@googlemail.com> Cc: NeilBrown <neilb@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: stable@vger.kernel.org (v4.0) Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-06-09cfg80211: wext: clear sinfo struct before calling driverJohannes Berg1-0/+2
Until recently, mac80211 overwrote all the statistics it could provide when getting called, but it now relies on the struct having been zeroed by the caller. This was always the case in nl80211, but wext used a static struct which could even cause values from one device leak to another. Using a static struct is OK (as even documented in a comment) since the whole usage of this function and its return value is always locked under RTNL. Not clearing the struct for calling the driver has always been wrong though, since drivers were free to only fill values they could report, so calling this for one device and then for another would always have leaked values from one to the other. Fix this by initializing the structure in question before the driver method call. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=99691 Cc: stable@vger.kernel.org Reported-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Reported-by: Alexander Kaltsas <alexkaltsas@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09SSB: Fix handling of ssb_pmu_get_alp_clock()Hauke Mehrtens1-3/+3
Dan Carpenter reported missing brackets which resulted in reading a wrong crystalfreq value. I also noticed that the result of this function is ignored. Reported-By: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Michael Buesch <m@bues.ch> Cc: davem@davemloft.net Cc: netdev@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10536/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-09iommu/vt-d: Change PASID support to bit 40 of Extended Capability RegisterDavid Woodhouse1-1/+2
The existing hardware implementations with PASID support advertised in bit 28? Forget them. They do not exist. Bit 28 means nothing. When we have something that works, it'll use bit 40. Do not attempt to infer anything meaningful from bit 28. This will be reflected in an updated VT-d spec in the extremely near future. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2015-06-09Revert "perf/x86/intel/uncore: Move uncore_box_init() out of driver ↵Ingo Molnar2-12/+15
initialization" This reverts commit c05199e5a57a579fea1e8fa65e2b511ceb524ffc. Vince Weaver reported the following crash while perf fuzzing: [ 79.473121] kernel BUG at mm/vmalloc.c:1335! [ 79.694391] Call Trace: [ 79.696997] <IRQ> [ 79.699090] [<ffffffff811b2130>] get_vm_area_caller+0x40/0x50 [ 79.705505] [<ffffffff81039f4d>] ? snb_uncore_imc_init_box+0x6d/0x90 [ 79.712414] [<ffffffff810635e5>] __ioremap_caller+0x195/0x350 [ 79.718610] [<ffffffff81039f4d>] ? snb_uncore_imc_init_box+0x6d/0x90 [ 79.725462] [<ffffffff81427f6b>] ? debug_object_activate+0x14b/0x1e0 [ 79.732346] [<ffffffff810637b7>] ioremap_nocache+0x17/0x20 [ 79.738283] [<ffffffff81039f4d>] snb_uncore_imc_init_box+0x6d/0x90 [ 79.744945] [<ffffffff81039cf7>] snb_uncore_imc_event_start+0xb7/0x110 [ 79.752020] [<ffffffff81039d97>] snb_uncore_imc_event_add+0x47/0x60 [ 79.758832] [<ffffffff81162cbb>] event_sched_in.isra.85+0xfb/0x330 [ 79.765519] [<ffffffff81162f5f>] group_sched_in+0x6f/0x1e0 [ 79.771481] [<ffffffff8101df1a>] ? native_sched_clock+0x2a/0x90 [ 79.777858] [<ffffffff811637bc>] __perf_event_enable+0x25c/0x2a0 [ 79.784418] [<ffffffff810f3e69>] ? tick_nohz_irq_exit+0x29/0x30 [ 79.790820] [<ffffffff8115ef30>] ? cpu_clock_event_start+0x40/0x40 [ 79.797546] [<ffffffff8115ef80>] remote_function+0x50/0x60 [ 79.803535] [<ffffffff810f8cd1>] flush_smp_call_function_queue+0x81/0x180 [ 79.810840] [<ffffffff810f9763>] generic_smp_call_function_single_interrupt+0x13/0x60 [ 79.819328] [<ffffffff8104b5e8>] smp_trace_call_function_single_interrupt+0x38/0xc0 [ 79.827614] [<ffffffff816de9be>] trace_call_function_single_interrupt+0x6e/0x80 [ 79.835465] <EOI> [ 79.837543] [<ffffffff8156e8b5>] ? cpuidle_enter_state+0x65/0x160 [ 79.844377] [<ffffffff8156e8a1>] ? cpuidle_enter_state+0x51/0x160 [ 79.851015] [<ffffffff8156e9e7>] cpuidle_enter+0x17/0x20 [ 79.856791] [<ffffffff810b6e39>] cpu_startup_entry+0x399/0x440 [ 79.863165] [<ffffffff816c9ddb>] rest_init+0xbb/0xd0 The offending commit is clearly confused as it moves heavy initialization work into IPI context. Revert it. Reported-by: Vince Weaver <vincent.weaver@maine.edu> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Yan, Zheng <zheng.z.yan@intel.com> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-06-09MIPS: pgtable-bits: Fix XPA damage to R6 definitions.Markos Chandras1-7/+7
Commit be0c37c985ed ("MIPS: Rearrange PTE bits into fixed positions.") rearranged the PTE bits into fixed positions in preparation for the XPA support. However, this patch broke R6 since it only took R2 cores into consideration for the RI/XI bits leading to boot failures. We fix this by adding the missing CONFIG_CPU_MIPSR6 definitions Fixes: be0c37c985ed ("MIPS: Rearrange PTE bits into fixed positions.") Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10208/ Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-09drm/i915: Fix DDC probe for passive adaptersJani Nikula1-3/+17
Passive DP->DVI/HDMI dongles on DP++ ports show up to the system as HDMI devices, as they do not have a sink device in them to respond to any AUX traffic. When probing these dongles over the DDC, sometimes they will NAK the first attempt even though the transaction is valid and they support the DDC protocol. The retry loop inside of drm_do_probe_ddc_edid() would normally catch this case and try the transaction again, resulting in success. That, however, was thwarted by the fix for [1]: commit 9292f37e1f5c79400254dca46f83313488093825 Author: Eugeni Dodonov <eugeni.dodonov@intel.com> Date: Thu Jan 5 09:34:28 2012 -0200 drm: give up on edid retries when i2c bus is not responding This added code to exit immediately if the return code from the i2c_transfer function was -ENXIO in order to reduce the amount of time spent in waiting for unresponsive or disconnected devices. That was possible because the underlying i2c bit banging algorithm had retries of its own (which, of course, were part of the reason for the bug the commit fixes). Since its introduction in commit f899fc64cda8569d0529452aafc0da31c042df2e Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Tue Jul 20 15:44:45 2010 -0700 drm/i915: use GMBUS to manage i2c links we've been flipping back and forth enabling the GMBUS transfers, but we've settled since then. The GMBUS implementation does not do any retries, however, bailing out of the drm_do_probe_ddc_edid() retry loop on first encounter of -ENXIO. This, combined with Eugeni's commit, broke the retry on -ENXIO. Retry GMBUS once on -ENXIO on first message to mitigate the issues with passive adapters. This patch is based on the work, and commit message, by Todd Previte <tprevite@gmail.com>. [1] https://bugs.freedesktop.org/show_bug.cgi?id=41059 v2: Don't retry if using bit banging. v3: Move retry within gmbux_xfer, retry only on first message. v4: Initialize GMBUS0 on retry (Ville). v5: Take index reads into account (Ville). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=85924 Cc: Todd Previte <tprevite@gmail.com> Cc: stable@vger.kernel.org Tested-by: Oliver Grafe <oliver.grafe@ge.com> (v2) Tested-by: Jim Bride <jim.bride@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-06-09ALSA: hda - fix number of devices query on hotplugDave Airlie1-1/+1
The new regmap code seems to cache this, which isn't helpful for the hotplug dock situation where this gets updated. Use the uncached query for this. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-06-08ntb: iounmap MW reg and vbase in error pathJon Mason1-1/+1
The MW regbase and vbase(s) were not being freed if an error occurred in the vbase allocation loop. This is corrected by updating the error path for the allocation loop to err4. Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Jon Mason <jdmason@kudzu.us>
2015-06-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds23-115/+196
Pull networking fixes from David Miller: 1) Fix stack allocation in s390 BPF JIT, from Michael Holzheu. 2) Disable LRO on openvswitch paths, from Jiri Benc. 3) UDP early demux doesn't handle multicast group membership properly, fix from Shawn Bohrer. 4) Fix TX queue hang due to incorrect handling of mixed sized fragments and linearlization in i40e driver, from Anjali Singhai Jain. 5) Cannot use disable_irq() in timer handler of AMD xgbe driver, from Thomas Lendacky. 6) b2net driver improperly assumes pci_alloc_consistent() gives zero'd out memory, use dma_zalloc_coherent(). From Sriharsha Basavapatna. 7) Fix use-after-free in MPLS and ipv6, from Robert Shearman. 8) Missing neif_napi_del() calls in cleanup paths of b44 driver, from Hauke Mehrtens. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: replace last open coded skb_orphan_frags with function call net: bcmgenet: power on MII block for all MII modes ipv6: Fix protocol resubmission ipv6: fix possible use after free of dev stats b44: call netif_napi_del() bridge: disable softirqs around br_fdb_update to avoid lockup Revert "bridge: use _bh spinlock variant for br_fdb_update to avoid lockup" mpls: fix possible use after free of device be2net: Replace dma/pci_alloc_coherent() calls with dma_zalloc_coherent() bridge: use _bh spinlock variant for br_fdb_update to avoid lockup amd-xgbe: Use disable_irq_nosync from within timer function rhashtable: add missing import <linux/export.h> i40e: Make sure to be in VEB mode if SRIOV is enabled at probe i40e: start up in VEPA mode by default i40e/i40evf: Fix mixed size frags and linearization ipv4/udp: Verify multicast group is ours in upd_v4_early_demux() openvswitch: disable LRO s390/bpf: fix bpf frame pointer setup s390/bpf: fix stack allocation
2015-06-08Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds1-0/+1
Pull last-minute virtio fix from Michael Tsirkin: "This fixes a minor issue affecting multiqueue virtio net when user keeps changing the number of active queues and CPUs are added and removed by hotplug" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_pci: Clear stale cpumask when setting irq affinity
2015-06-08Merge tag 'fixes-for-linus' of ↵Linus Torvalds12-171/+72
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Kevin Hilman: "About 10 days worth of small bug fixes, and the (hopefully) final round fixes for from arm-soc land for the -rc cycle. Nothing special to note, but here's a brief summary of fixes by SoC type: - OMAP: small set of misc DT fixes; boot fix for THUMB2 kernel - mediatek: PMIC fixes; DT fix for model name - exynos: wakeup interupt fixes for 3250 - mvebu: revert mbus patch which broke DMA masters * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: am335x-boneblack: disable RTC-only sleep to avoid hardware damage ARM: dts: AM35xx: fix system control module clocks arm64: dts: mt8173-evb: fix model name ARM: exynos: Fix wake-up interrupts for Exynos3250 ARM: dts: Fix n900 dts file to work around 4.1 touchscreen regression on n900 ARM: dts: Fix dm816x to use right compatible flag for MUSB ARM: OMAP3: Fix booting with thumb2 kernel Revert "bus: mvebu-mbus: make sure SDRAM CS for DMA don't overlap the MBus bridge window" bus: mvebu-mbus: do not set WIN_CTRL_SYNCBARRIER on non io-coherent platforms. ARM: mvebu: armada-xp-linksys-mamba: Disable internal RTC soc: mediatek: Add compile dependency to pmic-wrapper soc: mediatek: PMIC wrap: Fix register state machine handling soc: mediatek: PMIC wrap: Fix clock rate handling
2015-06-08net: replace last open coded skb_orphan_frags with function callWillem de Bruijn1-9/+2
Commit 70008aa50e92 ("skbuff: convert to skb_orphan_frags") replaced open coded tests of SKBTX_DEV_ZEROCOPY and skb_copy_ubufs with calls to helper function skb_orphan_frags. Apply that to the last remaining open coded site. Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-08net: bcmgenet: power on MII block for all MII modesFlorian Fainelli1-3/+9
The RGMII block is currently only powered on when using RGMII or RGMII_NO_ID, which is not correct when using the GENET interface in MII or Reverse MII modes. We always need to power on the RGMII interface for this block to properly work, regardless of the MII mode in which we operate. Fixes: aa09677cba423 ("net: bcmgenet: add MDIO routines") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-08ipv6: Fix protocol resubmissionJosh Hunt1-3/+5
UDP encapsulation is broken on IPv6. This is because the logic to resubmit the nexthdr is inverted, checking for a ret value > 0 instead of < 0. Also, the resubmit label is in the wrong position since we already get the nexthdr value when performing decapsulation. In addition the skb pull is no longer necessary either. This changes the return value check to look for < 0, using it for the nexthdr on the next iteration, and moves the resubmit label to the proper location. With these changes the v6 code now matches what we do in the v4 ip input code wrt resubmitting when decapsulating. Signed-off-by: Josh Hunt <johunt@akamai.com> Acked-by: "Tom Herbert" <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-08ipv6: fix possible use after free of dev statsRobert Shearman1-2/+9
The memory pointed to by idev->stats.icmpv6msgdev, idev->stats.icmpv6dev and idev->stats.ipv6 can each be used in an RCU read context without taking a reference on idev. For example, through IP6_*_STATS_* calls in ip6_rcv. These memory blocks are freed without waiting for an RCU grace period to elapse. This could lead to the memory being written to after it has been freed. Fix this by using call_rcu to free the memory used for stats, as well as idev after an RCU grace period has elapsed. Signed-off-by: Robert Shearman <rshearma@brocade.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-08Merge tag 'omap-for-v4.1/fixes-rc6' of ↵Kevin Hilman6-33/+34
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Merge omap fixes for v4.1, urgent fix to avoid potential hardware damage From Tony Lindgren: Omap fixes for the -rc cycle, including a fix for potential hardware breakage on BeagleBones: - BeagleBones don't support RTC-only mode, it can cause hardware damage if system-power-controller is specified without ti,pmic-shutdown-controller - Fix a recent regression to am3517 SoCs caused by the recent clock move that was not noticed until now despite automated boot testing - Fix a regression for n900 touchscreen triggered by recent recent input changes - Fix compatible property for dm816x USB to avoid errors with USB Ethernet - Fix oops for omap3 when built with CONFIG_THUMB2_KERNEL * tag 'omap-for-v4.1/fixes-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: am335x-boneblack: disable RTC-only sleep to avoid hardware damage ARM: dts: AM35xx: fix system control module clocks ARM: dts: Fix n900 dts file to work around 4.1 touchscreen regression on n900 ARM: dts: Fix dm816x to use right compatible flag for MUSB ARM: OMAP3: Fix booting with thumb2 kernel
2015-06-08Input: synaptics - add min/max quirk for Lenovo S540Peter Hutterer1-1/+6
https://bugzilla.redhat.com/show_bug.cgi?id=1223051#c2 Cc: stable@vger.kernel.org Tested-by: tommy.gagnes@gmail.com Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-08Merge git://git.infradead.org/intel-iommuLinus Torvalds1-5/+8
Pull Intel IOMMU fix from David Woodhouse: "This fixes an oops when attempting to enable 1:1 passthrough mode for devices on which VT-d translation was disabled anyway. It's actually a long-standing bug but recent changes (commit 18436afdc11a: "iommu/vt-d: Allow RMRR on graphics devices too") have made it much easier to trigger with 'iommu=pt intel_iommu=igfx_off' on the command line" * git://git.infradead.org/intel-iommu: iommu/vt-d: Fix passthrough mode with translation-disabled devices
2015-06-08Merge branch 'for-4.1-fixes' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixes from Tejun Heo: "Two driver fixes. One is for an ahci_mvebu controller config bug and the other fixes pata_octeon_cf build issue" * 'for-4.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: pata_octeon_cf: fix broken build ata: ahci_mvebu: Fix wrongly set base address for the MBus window setting
2015-06-08dmaengine: at_xdmac: rework slave configuration partLudovic Desroches1-60/+96
Rework slave configuration part in order to more report wrong errors about the configuration. Only maxburst and addr width values are checked when doing the slave configuration. The validity of the channel configuration is done at prepare time. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: stable@vger.kernel.org # 4.0 and later Signed-off-by: Vinod Koul <vinod.koul@intel.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 20:27:03 +0000