diff options
Diffstat (limited to 'arch/arm')
-rw-r--r-- | arch/arm/mach-omap2/board-4430sdp.c | 23 | ||||
-rw-r--r-- | arch/arm/mach-omap2/board-omap4panda.c | 25 | ||||
-rw-r--r-- | arch/arm/mach-omap2/display.c | 39 | ||||
-rw-r--r-- | arch/arm/mach-shmobile/board-ag5evm.c | 43 | ||||
-rw-r--r-- | arch/arm/mach-shmobile/board-ap4evb.c | 32 | ||||
-rw-r--r-- | arch/arm/mach-shmobile/board-mackerel.c | 4 | ||||
-rw-r--r-- | arch/arm/mach-shmobile/clock-sh7372.c | 4 | ||||
-rw-r--r-- | arch/arm/mach-shmobile/clock-sh73a0.c | 4 |
8 files changed, 128 insertions, 46 deletions
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 2ceb75d21eb2..39fba9df17fb 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -602,20 +602,6 @@ static void __init omap_sfh7741prox_init(void) __func__, OMAP4_SFH7741_ENABLE_GPIO, error); } -static void sdp4430_hdmi_mux_init(void) -{ - /* PAD0_HDMI_HPD_PAD1_HDMI_CEC */ - omap_mux_init_signal("hdmi_hpd", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("hdmi_cec", - OMAP_PIN_INPUT_PULLUP); - /* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */ - omap_mux_init_signal("hdmi_ddc_scl", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("hdmi_ddc_sda", - OMAP_PIN_INPUT_PULLUP); -} - static struct gpio sdp4430_hdmi_gpios[] = { { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" }, { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, @@ -833,9 +819,16 @@ static void omap_4430sdp_display_init(void) pr_err("%s: Could not get display_sel GPIO\n", __func__); sdp4430_lcd_init(); - sdp4430_hdmi_mux_init(); sdp4430_picodlp_init(); omap_display_init(&sdp4430_dss_data); + /* + * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and + * later have external pull up on the HDMI I2C lines + */ + if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2) + omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); + else + omap_hdmi_init(0); } #ifdef CONFIG_OMAP_MUX diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index e96a2e7ad36f..30ad40db2cf3 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -412,21 +412,6 @@ int __init omap4_panda_dvi_init(void) return r; } - -static void omap4_panda_hdmi_mux_init(void) -{ - /* PAD0_HDMI_HPD_PAD1_HDMI_CEC */ - omap_mux_init_signal("hdmi_hpd", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("hdmi_cec", - OMAP_PIN_INPUT_PULLUP); - /* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */ - omap_mux_init_signal("hdmi_ddc_scl", - OMAP_PIN_INPUT_PULLUP); - omap_mux_init_signal("hdmi_ddc_sda", - OMAP_PIN_INPUT_PULLUP); -} - static struct gpio panda_hdmi_gpios[] = { { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" }, { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, @@ -478,8 +463,16 @@ void omap4_panda_display_init(void) if (r) pr_err("error initializing panda DVI\n"); - omap4_panda_hdmi_mux_init(); omap_display_init(&omap4_panda_dss_data); + + /* + * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and + * later have external pull up on the HDMI I2C lines + */ + if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2) + omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); + else + omap_hdmi_init(0); } static void __init omap4_panda_init(void) diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index bc6cf863a563..3c446d1a1781 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -30,6 +30,7 @@ #include <plat/omap-pm.h> #include "common.h" +#include "mux.h" #include "control.h" #include "display.h" @@ -97,6 +98,36 @@ static const struct omap_dss_hwmod_data omap4_dss_hwmod_data[] __initdata = { { "dss_hdmi", "omapdss_hdmi", -1 }, }; +static void omap4_hdmi_mux_pads(enum omap_hdmi_flags flags) +{ + u32 reg; + u16 control_i2c_1; + + /* PAD0_HDMI_HPD_PAD1_HDMI_CEC */ + omap_mux_init_signal("hdmi_hpd", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("hdmi_cec", + OMAP_PIN_INPUT_PULLUP); + /* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */ + omap_mux_init_signal("hdmi_ddc_scl", + OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("hdmi_ddc_sda", + OMAP_PIN_INPUT_PULLUP); + + /* + * CONTROL_I2C_1: HDMI_DDC_SDA_PULLUPRESX (bit 28) and + * HDMI_DDC_SCL_PULLUPRESX (bit 24) are set to disable + * internal pull up resistor. + */ + if (flags & OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP) { + control_i2c_1 = OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_1; + reg = omap4_ctrl_pad_readl(control_i2c_1); + reg |= (OMAP4_HDMI_DDC_SDA_PULLUPRESX_MASK | + OMAP4_HDMI_DDC_SCL_PULLUPRESX_MASK); + omap4_ctrl_pad_writel(reg, control_i2c_1); + } +} + static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes) { u32 enable_mask, enable_shift; @@ -130,6 +161,14 @@ static int omap4_dsi_mux_pads(int dsi_id, unsigned lanes) return 0; } +int omap_hdmi_init(enum omap_hdmi_flags flags) +{ + if (cpu_is_omap44xx()) + omap4_hdmi_mux_pads(flags); + + return 0; +} + static int omap_dsi_enable_pads(int dsi_id, unsigned lane_mask) { if (cpu_is_omap44xx()) diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index a4e6ca04e319..eff8a96c75ee 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -271,7 +271,7 @@ static struct sh_mobile_lcdc_info lcdc0_info = { .flags = LCDC_FLAGS_DWPOL, .lcd_size_cfg.width = 44, .lcd_size_cfg.height = 79, - .bpp = 16, + .fourcc = V4L2_PIX_FMT_RGB565, .lcd_cfg = lcdc0_modes, .num_cfg = ARRAY_SIZE(lcdc0_modes), .board_cfg = { @@ -321,12 +321,46 @@ static struct resource mipidsi0_resources[] = { }, }; +#define DSI0PHYCR 0xe615006c +static int sh_mipi_set_dot_clock(struct platform_device *pdev, + void __iomem *base, + int enable) +{ + struct clk *pck; + int ret; + + pck = clk_get(&pdev->dev, "dsip_clk"); + if (IS_ERR(pck)) { + ret = PTR_ERR(pck); + goto sh_mipi_set_dot_clock_pck_err; + } + + if (enable) { + clk_set_rate(pck, clk_round_rate(pck, 24000000)); + __raw_writel(0x2a809010, DSI0PHYCR); + clk_enable(pck); + } else { + clk_disable(pck); + } + + ret = 0; + + clk_put(pck); + +sh_mipi_set_dot_clock_pck_err: + return ret; +} + static struct sh_mipi_dsi_info mipidsi0_info = { .data_format = MIPI_RGB888, .lcd_chan = &lcdc0_info.ch[0], + .lane = 2, .vsynw_offset = 20, .clksrc = 1, - .flags = SH_MIPI_DSI_HSABM, + .flags = SH_MIPI_DSI_HSABM | + SH_MIPI_DSI_SYNC_PULSES_MODE | + SH_MIPI_DSI_HSbyteCLK, + .set_dot_clock = sh_mipi_set_dot_clock, }; static struct platform_device mipidsi0_device = { @@ -472,8 +506,6 @@ static void __init ag5evm_map_io(void) shmobile_setup_console(); } -#define DSI0PHYCR 0xe615006c - static void __init ag5evm_init(void) { sh73a0_pinmux_init(); @@ -554,9 +586,6 @@ static void __init ag5evm_init(void) gpio_direction_output(GPIO_PORT235, 0); lcd_backlight_reset(); - /* MIPI-DSI clock setup */ - __raw_writel(0x2a809010, DSI0PHYCR); - /* enable SDHI0 on CN15 [SD I/F] */ gpio_request(GPIO_FN_SDHICD0, NULL); gpio_request(GPIO_FN_SDHIWP0, NULL); diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index d2e7b73aa9b6..aab0a349f759 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -491,7 +491,7 @@ static struct sh_mobile_lcdc_info lcdc_info = { .meram_dev = &meram_info, .ch[0] = { .chan = LCDC_CHAN_MAINLCD, - .bpp = 16, + .fourcc = V4L2_PIX_FMT_RGB565, .lcd_cfg = ap4evb_lcdc_modes, .num_cfg = ARRAY_SIZE(ap4evb_lcdc_modes), .meram_cfg = &lcd_meram_cfg, @@ -564,6 +564,30 @@ static struct platform_device keysc_device = { }; /* MIPI-DSI */ +#define PHYCTRL 0x0070 +static int sh_mipi_set_dot_clock(struct platform_device *pdev, + void __iomem *base, + int enable) +{ + struct clk *pck = clk_get(&pdev->dev, "dsip_clk"); + void __iomem *phy = base + PHYCTRL; + + if (IS_ERR(pck)) + return PTR_ERR(pck); + + if (enable) { + clk_set_rate(pck, clk_round_rate(pck, 24000000)); + iowrite32(ioread32(phy) | (0xb << 8), phy); + clk_enable(pck); + } else { + clk_disable(pck); + } + + clk_put(pck); + + return 0; +} + static struct resource mipidsi0_resources[] = { [0] = { .start = 0xffc60000, @@ -580,7 +604,11 @@ static struct resource mipidsi0_resources[] = { static struct sh_mipi_dsi_info mipidsi0_info = { .data_format = MIPI_RGB888, .lcd_chan = &lcdc_info.ch[0], + .lane = 2, .vsynw_offset = 17, + .flags = SH_MIPI_DSI_SYNC_PULSES_MODE | + SH_MIPI_DSI_HSbyteCLK, + .set_dot_clock = sh_mipi_set_dot_clock, }; static struct platform_device mipidsi0_device = { @@ -798,7 +826,7 @@ static struct sh_mobile_lcdc_info sh_mobile_lcdc1_info = { .meram_dev = &meram_info, .ch[0] = { .chan = LCDC_CHAN_MAINLCD, - .bpp = 16, + .fourcc = V4L2_PIX_FMT_RGB565, .interface_type = RGB24, .clock_divider = 1, .flags = LCDC_FLAGS_DWPOL, diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index cbc5934ae03f..9b42fbd10f8e 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -388,7 +388,7 @@ static struct sh_mobile_lcdc_info lcdc_info = { .clock_source = LCDC_CLK_BUS, .ch[0] = { .chan = LCDC_CHAN_MAINLCD, - .bpp = 16, + .fourcc = V4L2_PIX_FMT_RGB565, .lcd_cfg = mackerel_lcdc_modes, .num_cfg = ARRAY_SIZE(mackerel_lcdc_modes), .interface_type = RGB24, @@ -451,7 +451,7 @@ static struct sh_mobile_lcdc_info hdmi_lcdc_info = { .clock_source = LCDC_CLK_EXTERNAL, .ch[0] = { .chan = LCDC_CHAN_MAINLCD, - .bpp = 16, + .fourcc = V4L2_PIX_FMT_RGB565, .interface_type = RGB24, .clock_divider = 1, .flags = LCDC_FLAGS_DWPOL, diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c index e349c22a0d71..293456d8dcfd 100644 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -612,8 +612,8 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("hdmi_clk", &div6_reparent_clks[DIV6_HDMI]), CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSIT]), CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]), - CLKDEV_ICK_ID("dsi0p_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]), - CLKDEV_ICK_ID("dsi1p_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]), + CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]), + CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]), /* MSTP32 clocks */ CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* IIC2 */ diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index 34944d01bf1e..afbead6a6e17 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -427,8 +427,8 @@ static struct clk_lookup lookups[] = { CLKDEV_CON_ID("sdhi2_clk", &div6_clks[DIV6_SDHI2]), CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSIT]), CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]), - CLKDEV_ICK_ID("dsi0p_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]), - CLKDEV_ICK_ID("dsi1p_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]), + CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]), + CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]), /* MSTP32 clocks */ CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */ |