Merge branch 'imx/pinctrl/for-3.5' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/pinctrl

* 'imx/pinctrl/for-3.5' of git://git.linaro.org/people/shawnguo/linux-2.6: (290 commits)
  ARM: mxs: enable pinctrl support
  video: mxsfb: adopt pinctrl support
  ASoC: mxs-saif: adopt pinctrl support
  i2c: mxs: adopt pinctrl support
  mtd: nand: gpmi: adopt pinctrl support
  mmc: mxs-mmc: adopt pinctrl support
  serial: mxs-auart: adopt pinctrl support
  serial: amba-pl011: adopt pinctrl support
  spi/imx: adopt pinctrl support
  i2c: imx: adopt pinctrl support
  can: flexcan: adopt pinctrl support
  net: fec: adopt pinctrl support
  tty: serial: imx: adopt pinctrl support
  mmc: sdhci-imx-esdhc: adopt pinctrl support
  ARM: imx6q: switch to use pinctrl subsystem
  ARM: mxs: enable pinctrl dummy states
  ARM: imx: enable pinctrl dummy states
  +3.4-rc5 update

41 files changed, 264 insertions, 146 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index cf006d40342c..c67494fc05a7 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -469,6 +469,7 @@ config ARCH_MXS
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
 	select HAVE_CLK_PREPARE
+	select PINCTRL
 	help
 	  Support for Freescale MXS-based family of processors
 
diff --git a/arch/arm/boot/dts/msm8660-surf.dts b/arch/arm/boot/dts/msm8660-surf.dts
index 15ded0deaa79..45bc4bb04e57 100644
--- a/arch/arm/boot/dts/msm8660-surf.dts
+++ b/arch/arm/boot/dts/msm8660-surf.dts
@@ -10,7 +10,7 @@
 	intc: interrupt-controller@02080000 {
 		compatible = "qcom,msm-8660-qgic";
 		interrupt-controller;
-		#interrupt-cells = <1>;
+		#interrupt-cells = <3>;
 		reg = < 0x02080000 0x1000 >,
 		      < 0x02081000 0x1000 >;
 	};
@@ -19,6 +19,6 @@
 		compatible = "qcom,msm-hsuart", "qcom,msm-uart";
 		reg = <0x19c40000 0x1000>,
 		      <0x19c00000 0x1000>;
-		interrupts = <195>;
+		interrupts = <0 195 0x0>;
 	};
 };
diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig
index 42da9183acc8..082175c54e7c 100644
--- a/arch/arm/configs/mini2440_defconfig
+++ b/arch/arm/configs/mini2440_defconfig
@@ -14,6 +14,8 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_BLK_DEV_INTEGRITY=y
 CONFIG_ARCH_S3C24XX=y
+# CONFIG_CPU_S3C2410 is not set
+CONFIG_CPU_S3C2440=y
 CONFIG_S3C_ADC=y
 CONFIG_S3C24XX_PWM=y
 CONFIG_MACH_MINI2440=y
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index 5b150afb995b..fef42b21cecb 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -118,14 +118,10 @@ static int twd_cpufreq_transition(struct notifier_block *nb,
 	 * The twd clock events must be reprogrammed to account for the new
 	 * frequency.  The timer is local to a cpu, so cross-call to the
 	 * changing cpu.
-	 *
-	 * Only wait for it to finish, if the cpu is active to avoid
-	 * deadlock when cpu1 is spinning on while(!cpu_active(cpu1)) during
-	 * booting of that cpu.
 	 */
 	if (state == CPUFREQ_POSTCHANGE || state == CPUFREQ_RESUMECHANGE)
 		smp_call_function_single(freqs->cpu, twd_update_frequency,
-					 NULL, cpu_active(freqs->cpu));
+			NULL, 1);
 
 	return NOTIFY_OK;
 }
diff --git a/arch/arm/mach-exynos/clock-exynos4.c b/arch/arm/mach-exynos/clock-exynos4.c
index df54c2a92225..6efd1e5919fd 100644
--- a/arch/arm/mach-exynos/clock-exynos4.c
+++ b/arch/arm/mach-exynos/clock-exynos4.c
@@ -497,25 +497,25 @@ static struct clk exynos4_init_clocks_off[] = {
 		.ctrlbit	= (1 << 3),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.0",
+		.devname	= "exynos4-sdhci.0",
 		.parent		= &exynos4_clk_aclk_133.clk,
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 5),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.1",
+		.devname	= "exynos4-sdhci.1",
 		.parent		= &exynos4_clk_aclk_133.clk,
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 6),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.2",
+		.devname	= "exynos4-sdhci.2",
 		.parent		= &exynos4_clk_aclk_133.clk,
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 7),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.3",
+		.devname	= "exynos4-sdhci.3",
 		.parent		= &exynos4_clk_aclk_133.clk,
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 8),
@@ -1202,7 +1202,7 @@ static struct clksrc_clk exynos4_clk_sclk_uart3 = {
 static struct clksrc_clk exynos4_clk_sclk_mmc0 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.0",
+		.devname	= "exynos4-sdhci.0",
 		.parent		= &exynos4_clk_dout_mmc0.clk,
 		.enable		= exynos4_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 0),
@@ -1213,7 +1213,7 @@ static struct clksrc_clk exynos4_clk_sclk_mmc0 = {
 static struct clksrc_clk exynos4_clk_sclk_mmc1 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.1",
+		.devname	= "exynos4-sdhci.1",
 		.parent		= &exynos4_clk_dout_mmc1.clk,
 		.enable		= exynos4_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 4),
@@ -1224,7 +1224,7 @@ static struct clksrc_clk exynos4_clk_sclk_mmc1 = {
 static struct clksrc_clk exynos4_clk_sclk_mmc2 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.2",
+		.devname	= "exynos4-sdhci.2",
 		.parent		= &exynos4_clk_dout_mmc2.clk,
 		.enable		= exynos4_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 8),
@@ -1235,7 +1235,7 @@ static struct clksrc_clk exynos4_clk_sclk_mmc2 = {
 static struct clksrc_clk exynos4_clk_sclk_mmc3 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.3",
+		.devname	= "exynos4-sdhci.3",
 		.parent		= &exynos4_clk_dout_mmc3.clk,
 		.enable		= exynos4_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 12),
@@ -1340,10 +1340,10 @@ static struct clk_lookup exynos4_clk_lookup[] = {
 	CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos4_clk_sclk_uart1.clk),
 	CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos4_clk_sclk_uart2.clk),
 	CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos4_clk_sclk_uart3.clk),
-	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &exynos4_clk_sclk_mmc0.clk),
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &exynos4_clk_sclk_mmc1.clk),
-	CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &exynos4_clk_sclk_mmc2.clk),
-	CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &exynos4_clk_sclk_mmc3.clk),
+	CLKDEV_INIT("exynos4-sdhci.0", "mmc_busclk.2", &exynos4_clk_sclk_mmc0.clk),
+	CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos4_clk_sclk_mmc1.clk),
+	CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos4_clk_sclk_mmc2.clk),
+	CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos4_clk_sclk_mmc3.clk),
 	CLKDEV_INIT("exynos4-fb.0", "lcd", &exynos4_clk_fimd0),
 	CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos4_clk_pdma0),
 	CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos4_clk_pdma1),
diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c
index d013982d0f8e..5cd7a8b8868c 100644
--- a/arch/arm/mach-exynos/clock-exynos5.c
+++ b/arch/arm/mach-exynos/clock-exynos5.c
@@ -455,25 +455,25 @@ static struct clk exynos5_init_clocks_off[] = {
 		.ctrlbit	= (1 << 20),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.0",
+		.devname	= "exynos4-sdhci.0",
 		.parent		= &exynos5_clk_aclk_200.clk,
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 12),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.1",
+		.devname	= "exynos4-sdhci.1",
 		.parent		= &exynos5_clk_aclk_200.clk,
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 13),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.2",
+		.devname	= "exynos4-sdhci.2",
 		.parent		= &exynos5_clk_aclk_200.clk,
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 14),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.3",
+		.devname	= "exynos4-sdhci.3",
 		.parent		= &exynos5_clk_aclk_200.clk,
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 15),
@@ -813,7 +813,7 @@ static struct clksrc_clk exynos5_clk_sclk_uart3 = {
 static struct clksrc_clk exynos5_clk_sclk_mmc0 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.0",
+		.devname	= "exynos4-sdhci.0",
 		.parent		= &exynos5_clk_dout_mmc0.clk,
 		.enable		= exynos5_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 0),
@@ -824,7 +824,7 @@ static struct clksrc_clk exynos5_clk_sclk_mmc0 = {
 static struct clksrc_clk exynos5_clk_sclk_mmc1 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.1",
+		.devname	= "exynos4-sdhci.1",
 		.parent		= &exynos5_clk_dout_mmc1.clk,
 		.enable		= exynos5_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 4),
@@ -835,7 +835,7 @@ static struct clksrc_clk exynos5_clk_sclk_mmc1 = {
 static struct clksrc_clk exynos5_clk_sclk_mmc2 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.2",
+		.devname	= "exynos4-sdhci.2",
 		.parent		= &exynos5_clk_dout_mmc2.clk,
 		.enable		= exynos5_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 8),
@@ -846,7 +846,7 @@ static struct clksrc_clk exynos5_clk_sclk_mmc2 = {
 static struct clksrc_clk exynos5_clk_sclk_mmc3 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.3",
+		.devname	= "exynos4-sdhci.3",
 		.parent		= &exynos5_clk_dout_mmc3.clk,
 		.enable		= exynos5_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 12),
@@ -990,10 +990,10 @@ static struct clk_lookup exynos5_clk_lookup[] = {
 	CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos5_clk_sclk_uart1.clk),
 	CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos5_clk_sclk_uart2.clk),
 	CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos5_clk_sclk_uart3.clk),
-	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &exynos5_clk_sclk_mmc0.clk),
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &exynos5_clk_sclk_mmc1.clk),
-	CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &exynos5_clk_sclk_mmc2.clk),
-	CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &exynos5_clk_sclk_mmc3.clk),
+	CLKDEV_INIT("exynos4-sdhci.0", "mmc_busclk.2", &exynos5_clk_sclk_mmc0.clk),
+	CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos5_clk_sclk_mmc1.clk),
+	CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos5_clk_sclk_mmc2.clk),
+	CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos5_clk_sclk_mmc3.clk),
 	CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos5_clk_pdma0),
 	CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos5_clk_pdma1),
 	CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos5_clk_mdma1),
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 8614aab47cc0..5ccd6e80a607 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -326,6 +326,11 @@ static void __init exynos4_map_io(void)
 	s3c_fimc_setname(2, "exynos4-fimc");
 	s3c_fimc_setname(3, "exynos4-fimc");
 
+	s3c_sdhci_setname(0, "exynos4-sdhci");
+	s3c_sdhci_setname(1, "exynos4-sdhci");
+	s3c_sdhci_setname(2, "exynos4-sdhci");
+	s3c_sdhci_setname(3, "exynos4-sdhci");
+
 	/* The I2C bus controllers are directly compatible with s3c2440 */
 	s3c_i2c0_setname("s3c2440-i2c");
 	s3c_i2c1_setname("s3c2440-i2c");
@@ -344,6 +349,11 @@ static void __init exynos5_map_io(void)
 	s3c_device_i2c0.resource[1].start = EXYNOS5_IRQ_IIC;
 	s3c_device_i2c0.resource[1].end   = EXYNOS5_IRQ_IIC;
 
+	s3c_sdhci_setname(0, "exynos4-sdhci");
+	s3c_sdhci_setname(1, "exynos4-sdhci");
+	s3c_sdhci_setname(2, "exynos4-sdhci");
+	s3c_sdhci_setname(3, "exynos4-sdhci");
+
 	/* The I2C bus controllers are directly compatible with s3c2440 */
 	s3c_i2c0_setname("s3c2440-i2c");
 	s3c_i2c1_setname("s3c2440-i2c");
@@ -537,7 +547,9 @@ void __init exynos5_init_irq(void)
 {
 	int irq;
 
-	gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
+#ifdef CONFIG_OF
+	of_irq_init(exynos4_dt_irq_match);
+#endif
 
 	for (irq = 0; irq < EXYNOS5_MAX_COMBINER_NR; irq++) {
 		combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
diff --git a/arch/arm/mach-exynos/dev-dwmci.c b/arch/arm/mach-exynos/dev-dwmci.c
index b025db4bf602..79035018fb74 100644
--- a/arch/arm/mach-exynos/dev-dwmci.c
+++ b/arch/arm/mach-exynos/dev-dwmci.c
@@ -16,6 +16,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
+#include <linux/ioport.h>
 #include <linux/mmc/dw_mmc.h>
 
 #include <plat/devs.h>
@@ -33,16 +34,8 @@ static int exynos4_dwmci_init(u32 slot_id, irq_handler_t handler, void *data)
 }
 
 static struct resource exynos4_dwmci_resource[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_DWMCI,
-		.end	= EXYNOS4_PA_DWMCI + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_DWMCI,
-		.end	= IRQ_DWMCI,
-		.flags	= IORESOURCE_IRQ,
-	}
+	[0] = DEFINE_RES_MEM(EXYNOS4_PA_DWMCI, SZ_4K),
+	[1] = DEFINE_RES_IRQ(EXYNOS4_IRQ_DWMCI),
 };
 
 static struct dw_mci_board exynos4_dwci_pdata = {
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index b4f1f902ce6d..ed90aef404c3 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -112,6 +112,7 @@ static struct s3c_sdhci_platdata nuri_hsmmc0_data __initdata = {
 	.host_caps		= (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
 				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
 				MMC_CAP_ERASE),
+	.host_caps2		= MMC_CAP2_BROKEN_VOLTAGE,
 	.cd_type		= S3C_SDHCI_CD_PERMANENT,
 	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 };
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index 7ebf79c2ab34..cb2b027f09a6 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -747,6 +747,7 @@ static struct s3c_sdhci_platdata universal_hsmmc0_data __initdata = {
 	.max_width		= 8,
 	.host_caps		= (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
 				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+	.host_caps2		= MMC_CAP2_BROKEN_VOLTAGE,
 	.cd_type		= S3C_SDHCI_CD_PERMANENT,
 	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 };
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 7561eca131b0..e0fc67cf659b 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -842,6 +842,8 @@ config SOC_IMX6Q
 	select HAVE_IMX_MMDC
 	select HAVE_IMX_SRC
 	select HAVE_SMP
+	select PINCTRL
+	select PINCTRL_IMX6Q
 	select USE_OF
 
 	help
diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c
index 5cca573964f0..5f577fbda2c8 100644
--- a/arch/arm/mach-imx/imx51-dt.c
+++ b/arch/arm/mach-imx/imx51-dt.c
@@ -14,6 +14,7 @@
 #include <linux/irqdomain.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
+#include <linux/pinctrl/machine.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <mach/common.h>
@@ -81,6 +82,8 @@ static void __init imx51_dt_init(void)
 
 	of_irq_init(imx51_irq_match);
 
+	pinctrl_provide_dummies();
+
 	node = of_find_matching_node(NULL, imx51_iomuxc_of_match);
 	if (node) {
 		of_id = of_match_node(imx51_iomuxc_of_match, node);
diff --git a/arch/arm/mach-imx/imx53-dt.c b/arch/arm/mach-imx/imx53-dt.c
index 4172279b3900..574eca4b89a5 100644
--- a/arch/arm/mach-imx/imx53-dt.c
+++ b/arch/arm/mach-imx/imx53-dt.c
@@ -15,6 +15,7 @@
 #include <linux/irqdomain.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
+#include <linux/pinctrl/machine.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <mach/common.h>
@@ -88,6 +89,8 @@ static void __init imx53_dt_init(void)
 
 	of_irq_init(imx53_irq_match);
 
+	pinctrl_provide_dummies();
+
 	node = of_find_matching_node(NULL, imx53_iomuxc_of_match);
 	if (node) {
 		of_id = of_match_node(imx53_iomuxc_of_match, node);
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index da6c1d9af768..3df360a52c17 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -19,6 +19,7 @@
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
+#include <linux/pinctrl/machine.h>
 #include <linux/phy.h>
 #include <linux/micrel_phy.h>
 #include <asm/smp_twd.h>
@@ -77,6 +78,12 @@ static int ksz9021rn_phy_fixup(struct phy_device *phydev)
 
 static void __init imx6q_init_machine(void)
 {
+	/*
+	 * This should be removed when all imx6q boards have pinctrl
+	 * states for devices defined in device tree.
+	 */
+	pinctrl_provide_dummies();
+
 	if (of_machine_is_compatible("fsl,imx6q-sabrelite"))
 		phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
 					   ksz9021rn_phy_fixup);
diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c
index 2bded591d5c2..fcafd3dafb8c 100644
--- a/arch/arm/mach-imx/mm-imx1.c
+++ b/arch/arm/mach-imx/mm-imx1.c
@@ -18,6 +18,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+#include <linux/pinctrl/machine.h>
 
 #include <asm/mach/map.h>
 
@@ -58,4 +59,5 @@ void __init imx1_soc_init(void)
 						MX1_GPIO_INT_PORTC, 0);
 	mxc_register_gpio("imx1-gpio", 3, MX1_GPIO4_BASE_ADDR, SZ_256,
 						MX1_GPIO_INT_PORTD, 0);
+	pinctrl_provide_dummies();
 }
diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c
index 14d540edfd1e..5f43905e5290 100644
--- a/arch/arm/mach-imx/mm-imx21.c
+++ b/arch/arm/mach-imx/mm-imx21.c
@@ -20,6 +20,7 @@
 
 #include <linux/mm.h>
 #include <linux/init.h>
+#include <linux/pinctrl/machine.h>
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/devices-common.h>
@@ -88,6 +89,7 @@ void __init imx21_soc_init(void)
 	mxc_register_gpio("imx21-gpio", 4, MX21_GPIO5_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
 	mxc_register_gpio("imx21-gpio", 5, MX21_GPIO6_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0);
 
+	pinctrl_provide_dummies();
 	imx_add_imx_dma();
 	platform_device_register_simple("imx21-audmux", 0, imx21_audmux_res,
 					ARRAY_SIZE(imx21_audmux_res));
diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c
index 153b457acdc0..6ff37140a4f8 100644
--- a/arch/arm/mach-imx/mm-imx25.c
+++ b/arch/arm/mach-imx/mm-imx25.c
@@ -19,6 +19,7 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/err.h>
+#include <linux/pinctrl/machine.h>
 
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
@@ -95,6 +96,7 @@ void __init imx25_soc_init(void)
 	mxc_register_gpio("imx31-gpio", 2, MX25_GPIO3_BASE_ADDR, SZ_16K, MX25_INT_GPIO3, 0);
 	mxc_register_gpio("imx31-gpio", 3, MX25_GPIO4_BASE_ADDR, SZ_16K, MX25_INT_GPIO4, 0);
 
+	pinctrl_provide_dummies();
 	/* i.mx25 has the i.mx35 type sdma */
 	imx_add_imx_sdma("imx35-sdma", MX25_SDMA_BASE_ADDR, MX25_INT_SDMA, &imx25_sdma_pdata);
 	/* i.mx25 has the i.mx31 type audmux */
diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c
index 8cb3f5e3e569..25662558e018 100644
--- a/arch/arm/mach-imx/mm-imx27.c
+++ b/arch/arm/mach-imx/mm-imx27.c
@@ -20,6 +20,7 @@
 
 #include <linux/mm.h>
 #include <linux/init.h>
+#include <linux/pinctrl/machine.h>
 #include <mach/hardware.h>
 #include <mach/common.h>
 #include <mach/devices-common.h>
@@ -89,6 +90,7 @@ void __init imx27_soc_init(void)
 	mxc_register_gpio("imx21-gpio", 4, MX27_GPIO5_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
 	mxc_register_gpio("imx21-gpio", 5, MX27_GPIO6_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0);
 
+	pinctrl_provide_dummies();
 	imx_add_imx_dma();
 	/* imx27 has the imx21 type audmux */
 	platform_device_register_simple("imx21-audmux", 0, imx27_audmux_res,
diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c
index 74127389e7ab..9128d15b1eb7 100644
--- a/arch/arm/mach-imx/mm-imx3.c
+++ b/arch/arm/mach-imx/mm-imx3.c
@@ -19,6 +19,7 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/err.h>
+#include <linux/pinctrl/machine.h>
 
 #include <asm/pgtable.h>
 #include <asm/system_misc.h>
@@ -267,6 +268,7 @@ void __init imx35_soc_init(void)
 	mxc_register_gpio("imx31-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0);
 	mxc_register_gpio("imx31-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0);
 
+	pinctrl_provide_dummies();
 	if (to_version == 1) {
 		strncpy(imx35_sdma_pdata.fw_name, "sdma-imx35-to1.bin",
 			strlen(imx35_sdma_pdata.fw_name));
diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c
index e10f3914fcfe..ba91e6b31cf4 100644
--- a/arch/arm/mach-imx/mm-imx5.c
+++ b/arch/arm/mach-imx/mm-imx5.c
@@ -14,6 +14,7 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/clk.h>
+#include <linux/pinctrl/machine.h>
 
 #include <asm/system_misc.h>
 #include <asm/mach/map.h>
@@ -223,6 +224,7 @@ void __init imx53_soc_init(void)
 	mxc_register_gpio("imx31-gpio", 5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH);
 	mxc_register_gpio("imx31-gpio", 6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH);
 
+	pinctrl_provide_dummies();
 	/* i.mx53 has the i.mx35 type sdma */
 	imx_add_imx_sdma("imx35-sdma", MX53_SDMA_BASE_ADDR, MX53_INT_SDMA, &imx53_sdma_pdata);
 
diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c
index 962e71169750..fb3496a52ef4 100644
--- a/arch/arm/mach-msm/board-msm8x60.c
+++ b/arch/arm/mach-msm/board-msm8x60.c
@@ -17,6 +17,7 @@
 #include <linux/irqdomain.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/memblock.h>
 
@@ -49,10 +50,22 @@ static void __init msm8x60_map_io(void)
 	msm_map_msm8x60_io();
 }
 
+#ifdef CONFIG_OF
+static struct of_device_id msm_dt_gic_match[] __initdata = {
+	{ .compatible = "qcom,msm-8660-qgic", .data = gic_of_init },
+	{}
+};
+#endif
+
 static void __init msm8x60_init_irq(void)
 {
-	gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE,
-		 (void *)MSM_QGIC_CPU_BASE);
+	if (!of_have_populated_dt())
+		gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE,
+			 (void *)MSM_QGIC_CPU_BASE);
+#ifdef CONFIG_OF
+	else
+		of_irq_init(msm_dt_gic_match);
+#endif
 
 	/* Edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */
 	writel(0xFFFFD7FF, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4);
@@ -73,16 +86,8 @@ static struct of_dev_auxdata msm_auxdata_lookup[] __initdata = {
 	{}
 };
 
-static struct of_device_id msm_dt_gic_match[] __initdata = {
-	{ .compatible = "qcom,msm-8660-qgic", },
-	{}
-};
-
 static void __init msm8x60_dt_init(void)
 {
-	irq_domain_generate_simple(msm_dt_gic_match, MSM8X60_QGIC_DIST_PHYS,
-				GIC_SPI_START);
-
 	if (of_machine_is_compatible("qcom,msm8660-surf")) {
 		printk(KERN_INFO "Init surf UART registers\n");
 		msm8x60_init_uart12dm();
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index c57f9964a713..07d5383d68ee 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -9,11 +9,13 @@ config SOC_IMX23
 	bool
 	select CPU_ARM926T
 	select HAVE_PWM
+	select PINCTRL_IMX23
 
 config SOC_IMX28
 	bool
 	select CPU_ARM926T
 	select HAVE_PWM
+	select PINCTRL_IMX28
 
 comment "MXS platforms:"
 
diff --git a/arch/arm/mach-mxs/include/mach/common.h b/arch/arm/mach-mxs/include/mach/common.h
index c50c3ea28a9d..8d88399b73ef 100644
--- a/arch/arm/mach-mxs/include/mach/common.h
+++ b/arch/arm/mach-mxs/include/mach/common.h
@@ -19,11 +19,13 @@ extern void mxs_timer_init(struct clk *, int);
 extern void mxs_restart(char, const char *);
 extern int mxs_saif_clkmux_select(unsigned int clkmux);
 
+extern void mx23_soc_init(void);
 extern int mx23_register_gpios(void);
 extern int mx23_clocks_init(void);
 extern void mx23_map_io(void);
 extern void mx23_init_irq(void);
 
+extern void mx28_soc_init(void);
 extern int mx28_register_gpios(void);
 extern int mx28_clocks_init(void);
 extern void mx28_map_io(void);
diff --git a/arch/arm/mach-mxs/mach-apx4devkit.c b/arch/arm/mach-mxs/mach-apx4devkit.c
index 48a7fab571a6..5e90b9dcdef8 100644
--- a/arch/arm/mach-mxs/mach-apx4devkit.c
+++ b/arch/arm/mach-mxs/mach-apx4devkit.c
@@ -207,6 +207,8 @@ static int apx4devkit_phy_fixup(struct phy_device *phy)
 
 static void __init apx4devkit_init(void)
 {
+	mx28_soc_init();
+
 	mxs_iomux_setup_multiple_pads(apx4devkit_pads,
 			ARRAY_SIZE(apx4devkit_pads));
 
diff --git a/arch/arm/mach-mxs/mach-m28evk.c b/arch/arm/mach-mxs/mach-m28evk.c
index 06d79963611c..4c00c879b893 100644
--- a/arch/arm/mach-mxs/mach-m28evk.c
+++ b/arch/arm/mach-mxs/mach-m28evk.c
@@ -319,6 +319,8 @@ static struct mxs_mmc_platform_data m28evk_mmc_pdata[] __initdata = {
 
 static void __init m28evk_init(void)
 {
+	mx28_soc_init();
+
 	mxs_iomux_setup_multiple_pads(m28evk_pads, ARRAY_SIZE(m28evk_pads));
 
 	mx28_add_duart();
diff --git a/arch/arm/mach-mxs/mach-mx23evk.c b/arch/arm/mach-mxs/mach-mx23evk.c
index 5ea1c57d2606..e7272a41939d 100644
--- a/arch/arm/mach-mxs/mach-mx23evk.c
+++ b/arch/arm/mach-mxs/mach-mx23evk.c
@@ -141,6 +141,8 @@ static void __init mx23evk_init(void)
 {
 	int ret;
 
+	mx23_soc_init();
+
 	mxs_iomux_setup_multiple_pads(mx23evk_pads, ARRAY_SIZE(mx23evk_pads));
 
 	mx23_add_duart();
diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c
index e386c142f93c..da4610ebe9e6 100644
--- a/arch/arm/mach-mxs/mach-mx28evk.c
+++ b/arch/arm/mach-mxs/mach-mx28evk.c
@@ -413,6 +413,8 @@ static void __init mx28evk_init(void)
 {
 	int ret;
 
+	mx28_soc_init();
+
 	mxs_iomux_setup_multiple_pads(mx28evk_pads, ARRAY_SIZE(mx28evk_pads));
 
 	mx28_add_duart();
diff --git a/arch/arm/mach-mxs/mach-stmp378x_devb.c b/arch/arm/mach-mxs/mach-stmp378x_devb.c
index a626c07b8713..6548965e4a76 100644
--- a/arch/arm/mach-mxs/mach-stmp378x_devb.c
+++ b/arch/arm/mach-mxs/mach-stmp378x_devb.c
@@ -85,6 +85,8 @@ static void __init stmp378x_dvb_init(void)
 {
 	int ret;
 
+	mx23_soc_init();
+
 	mxs_iomux_setup_multiple_pads(stmp378x_dvb_pads,
 			ARRAY_SIZE(stmp378x_dvb_pads));
 
diff --git a/arch/arm/mach-mxs/mach-tx28.c b/arch/arm/mach-mxs/mach-tx28.c
index 2c0862e655ee..8837029de1a4 100644
--- a/arch/arm/mach-mxs/mach-tx28.c
+++ b/arch/arm/mach-mxs/mach-tx28.c
@@ -146,6 +146,8 @@ static struct mxs_mmc_platform_data tx28_mmc0_pdata __initdata = {
 
 static void __init tx28_stk5v3_init(void)
 {
+	mx28_soc_init();
+
 	mxs_iomux_setup_multiple_pads(tx28_stk5v3_pads,
 			ARRAY_SIZE(tx28_stk5v3_pads));
 
diff --git a/arch/arm/mach-mxs/mm.c b/arch/arm/mach-mxs/mm.c
index 50af5ceebf6d..67a384edcf5b 100644
--- a/arch/arm/mach-mxs/mm.c
+++ b/arch/arm/mach-mxs/mm.c
@@ -13,6 +13,7 @@
 
 #include <linux/mm.h>
 #include <linux/init.h>
+#include <linux/pinctrl/machine.h>
 
 #include <asm/mach/map.h>
 
@@ -61,3 +62,13 @@ void __init mx28_init_irq(void)
 {
 	icoll_init_irq();
 }
+
+void __init mx23_soc_init(void)
+{
+	pinctrl_provide_dummies();
+}
+
+void __init mx28_soc_init(void)
+{
+	pinctrl_provide_dummies();
+}
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
index c54cef25895c..cbf51ae81855 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
@@ -17,6 +17,7 @@
  *
  * bit     23 - Input/Output (PXA2xx specific)
  * bit     24 - Wakeup Enable(PXA2xx specific)
+ * bit     25 - Keep Output  (PXA2xx specific)
  */
 
 #define MFP_DIR_IN		(0x0 << 23)
@@ -25,6 +26,12 @@
 #define MFP_DIR(x)		(((x) >> 23) & 0x1)
 
 #define MFP_LPM_CAN_WAKEUP	(0x1 << 24)
+
+/*
+ * MFP_LPM_KEEP_OUTPUT must be specified for pins that need to
+ * retain their last output level (low or high).
+ * Note: MFP_LPM_KEEP_OUTPUT has no effect on pins configured for input.
+ */
 #define MFP_LPM_KEEP_OUTPUT	(0x1 << 25)
 
 #define WAKEUP_ON_EDGE_RISE	(MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_RISE)
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index b0a842887780..ef0426a159d4 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -33,6 +33,8 @@
 #define BANK_OFF(n)	(((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
 #define GPLR(x)		__REG2(0x40E00000, BANK_OFF((x) >> 5))
 #define GPDR(x)		__REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x0c)
+#define GPSR(x)		__REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x18)
+#define GPCR(x)		__REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x24)
 
 #define PWER_WE35	(1 << 24)
 
@@ -348,6 +350,7 @@ static inline void pxa27x_mfp_init(void) {}
 #ifdef CONFIG_PM
 static unsigned long saved_gafr[2][4];
 static unsigned long saved_gpdr[4];
+static unsigned long saved_gplr[4];
 static unsigned long saved_pgsr[4];
 
 static int pxa2xx_mfp_suspend(void)
@@ -366,14 +369,26 @@ static int pxa2xx_mfp_suspend(void)
 	}
 
 	for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) {
-
 		saved_gafr[0][i] = GAFR_L(i);
 		saved_gafr[1][i] = GAFR_U(i);
 		saved_gpdr[i] = GPDR(i * 32);
+		saved_gplr[i] = GPLR(i * 32);
 		saved_pgsr[i] = PGSR(i);
 
-		GPDR(i * 32) = gpdr_lpm[i];
+		GPSR(i * 32) = PGSR(i);
+		GPCR(i * 32) = ~PGSR(i);
+	}
+
+	/* set GPDR bits taking into account MFP_LPM_KEEP_OUTPUT */
+	for (i = 0; i < pxa_last_gpio; i++) {
+		if ((gpdr_lpm[gpio_to_bank(i)] & GPIO_bit(i)) ||
+		    ((gpio_desc[i].config & MFP_LPM_KEEP_OUTPUT) &&
+		     (saved_gpdr[gpio_to_bank(i)] & GPIO_bit(i))))
+			GPDR(i) |= GPIO_bit(i);
+		else
+			GPDR(i) &= ~GPIO_bit(i);
 	}
+
 	return 0;
 }
 
@@ -384,6 +399,8 @@ static void pxa2xx_mfp_resume(void)
 	for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) {
 		GAFR_L(i) = saved_gafr[0][i];
 		GAFR_U(i) = saved_gafr[1][i];
+		GPSR(i * 32) = saved_gplr[i];
+		GPCR(i * 32) = ~saved_gplr[i];
 		GPDR(i * 32) = saved_gpdr[i];
 		PGSR(i) = saved_pgsr[i];
 	}
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 6bce78edce7a..4726c246dcdc 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -421,8 +421,11 @@ void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
 	pxa_register_device(&pxa27x_device_i2c_power, info);
 }
 
+static struct pxa_gpio_platform_data pxa27x_gpio_info __initdata = {
+	.gpio_set_wake = gpio_set_wake,
+};
+
 static struct platform_device *devices[] __initdata = {
-	&pxa_device_gpio,
 	&pxa27x_device_udc,
 	&pxa_device_pmu,
 	&pxa_device_i2s,
@@ -458,6 +461,7 @@ static int __init pxa27x_init(void)
 		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
 		register_syscore_ops(&pxa2xx_clock_syscore_ops);
 
+		pxa_register_device(&pxa_device_gpio, &pxa27x_gpio_info);
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
 	}
 
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 0f3a327ebcaa..b34287ab5afd 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -111,10 +111,6 @@ config S3C24XX_SETUP_TS
 	help
 	  Compile in platform device definition for Samsung TouchScreen.
 
-# cpu-specific sections
-
-if CPU_S3C2410
-
 config S3C2410_DMA
 	bool
 	depends on S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442)
@@ -127,6 +123,10 @@ config S3C2410_PM
 	help
 	  Power Management code common to S3C2410 and better
 
+# cpu-specific sections
+
+if CPU_S3C2410
+
 config S3C24XX_SIMTEC_NOR
 	bool
 	help
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index a8933de3d627..32395664e879 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -25,6 +25,7 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
+#include <linux/mmc/host.h>
 #include <linux/interrupt.h>
 
 #include <asm/hardware/vic.h>
@@ -765,6 +766,7 @@ static void __init goni_pmic_init(void)
 /* MoviNAND */
 static struct s3c_sdhci_platdata goni_hsmmc0_data __initdata = {
 	.max_width		= 4,
+	.host_caps2		= MMC_CAP2_BROKEN_VOLTAGE,
 	.cd_type		= S3C_SDHCI_CD_PERMANENT,
 };
 
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 7c524b4e415d..16be4c56abe3 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -306,7 +306,7 @@ void sa11x0_register_irda(struct irda_platform_data *irda)
 }
 
 static struct resource sa1100_rtc_resources[] = {
-	DEFINE_RES_MEM(0x90010000, 0x9001003f),
+	DEFINE_RES_MEM(0x90010000, 0x40),
 	DEFINE_RES_IRQ_NAMED(IRQ_RTC1Hz, "rtc 1Hz"),
 	DEFINE_RES_IRQ_NAMED(IRQ_RTCAlrm, "rtc alarm"),
 };
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 1621ad07d284..33339745d432 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -1667,8 +1667,10 @@ void __init u300_init_irq(void)
 
 	for (i = 0; i < U300_VIC_IRQS_END; i++)
 		set_bit(i, (unsigned long *) &mask[0]);
-	vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], mask[0]);
-	vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], mask[1]);
+	vic_init((void __iomem *) U300_INTCON0_VBASE, IRQ_U300_INTCON0_START,
+		 mask[0], mask[0]);
+	vic_init((void __iomem *) U300_INTCON1_VBASE, IRQ_U300_INTCON1_START,
+		 mask[1], mask[1]);
 }
 
 
diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c
index a38f80238ea9..cb04bd6ab3e7 100644
--- a/arch/arm/mach-u300/i2c.c
+++ b/arch/arm/mach-u300/i2c.c
@@ -146,9 +146,6 @@ static struct ab3100_platform_data ab3100_plf_data = {
 				.min_uV = 1800000,
 				.max_uV = 1800000,
 				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.valid_ops_mask =
-				REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS,
 				.always_on = 1,
 				.boot_on = 1,
 			},
@@ -160,9 +157,6 @@ static struct ab3100_platform_data ab3100_plf_data = {
 				.min_uV = 2500000,
 				.max_uV = 2500000,
 				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.valid_ops_mask =
-				REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS,
 				.always_on = 1,
 				.boot_on = 1,
 			},
@@ -230,8 +224,7 @@ static struct ab3100_platform_data ab3100_plf_data = {
 				.max_uV = 1800000,
 				.valid_modes_mask = REGULATOR_MODE_NORMAL,
 				.valid_ops_mask =
-				REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS,
+				REGULATOR_CHANGE_VOLTAGE,
 				.always_on = 1,
 				.boot_on = 1,
 			},
diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h
index ee78a26707eb..ec09c1e07b1a 100644
--- a/arch/arm/mach-u300/include/mach/irqs.h
+++ b/arch/arm/mach-u300/include/mach/irqs.h
@@ -12,101 +12,101 @@
 #ifndef __MACH_IRQS_H
 #define __MACH_IRQS_H
 
-#define IRQ_U300_INTCON0_START		0
-#define IRQ_U300_INTCON1_START		32
+#define IRQ_U300_INTCON0_START		1
+#define IRQ_U300_INTCON1_START		33
 /* These are on INTCON0 - 30 lines */
-#define IRQ_U300_IRQ0_EXT		0
-#define IRQ_U300_IRQ1_EXT		1
-#define IRQ_U300_DMA			2
-#define IRQ_U300_VIDEO_ENC_0		3
-#define IRQ_U300_VIDEO_ENC_1		4
-#define IRQ_U300_AAIF_RX		5
-#define IRQ_U300_AAIF_TX		6
-#define IRQ_U300_AAIF_VGPIO		7
-#define IRQ_U300_AAIF_WAKEUP		8
-#define IRQ_U300_PCM_I2S0_FRAME		9
-#define IRQ_U300_PCM_I2S0_FIFO		10
-#define IRQ_U300_PCM_I2S1_FRAME		11
-#define IRQ_U300_PCM_I2S1_FIFO		12
-#define IRQ_U300_XGAM_GAMCON		13
-#define IRQ_U300_XGAM_CDI		14
-#define IRQ_U300_XGAM_CDICON		15
+#define IRQ_U300_IRQ0_EXT		1
+#define IRQ_U300_IRQ1_EXT		2
+#define IRQ_U300_DMA			3
+#define IRQ_U300_VIDEO_ENC_0		4
+#define IRQ_U300_VIDEO_ENC_1		5
+#define IRQ_U300_AAIF_RX		6
+#define IRQ_U300_AAIF_TX		7
+#define IRQ_U300_AAIF_VGPIO		8
+#define IRQ_U300_AAIF_WAKEUP		9
+#define IRQ_U300_PCM_I2S0_FRAME		10
+#define IRQ_U300_PCM_I2S0_FIFO		11
+#define IRQ_U300_PCM_I2S1_FRAME		12
+#define IRQ_U300_PCM_I2S1_FIFO		13
+#define IRQ_U300_XGAM_GAMCON		14
+#define IRQ_U300_XGAM_CDI		15
+#define IRQ_U300_XGAM_CDICON		16
 #if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
 /* MMIACC not used on the DB3210 or DB3350 chips */
-#define IRQ_U300_XGAM_MMIACC		16
+#define IRQ_U300_XGAM_MMIACC		17
 #endif
-#define IRQ_U300_XGAM_PDI		17
-#define IRQ_U300_XGAM_PDICON		18
-#define IRQ_U300_XGAM_GAMEACC		19
-#define IRQ_U300_XGAM_MCIDCT		20
-#define IRQ_U300_APEX			21
-#define IRQ_U300_UART0			22
-#define IRQ_U300_SPI			23
-#define IRQ_U300_TIMER_APP_OS		24
-#define IRQ_U300_TIMER_APP_DD		25
-#define IRQ_U300_TIMER_APP_GP1		26
-#define IRQ_U300_TIMER_APP_GP2		27
-#define IRQ_U300_TIMER_OS		28
-#define IRQ_U300_TIMER_MS		29
-#define IRQ_U300_KEYPAD_KEYBF		30
-#define IRQ_U300_KEYPAD_KEYBR		31
+#define IRQ_U300_XGAM_PDI		18
+#define IRQ_U300_XGAM_PDICON		19
+#define IRQ_U300_XGAM_GAMEACC		20
+#define IRQ_U300_XGAM_MCIDCT		21
+#define IRQ_U300_APEX			22
+#define IRQ_U300_UART0			23
+#define IRQ_U300_SPI			24
+#define IRQ_U300_TIMER_APP_OS		25
+#define IRQ_U300_TIMER_APP_DD		26
+#define IRQ_U300_TIMER_APP_GP1		27
+#define IRQ_U300_TIMER_APP_GP2		28
+#define IRQ_U300_TIMER_OS		29
+#define IRQ_U300_TIMER_MS		30
+#define IRQ_U300_KEYPAD_KEYBF		31
+#define IRQ_U300_KEYPAD_KEYBR		32
 /* These are on INTCON1 - 32 lines */
-#define IRQ_U300_GPIO_PORT0		32
-#define IRQ_U300_GPIO_PORT1		33
-#define IRQ_U300_GPIO_PORT2		34
+#define IRQ_U300_GPIO_PORT0		33
+#define IRQ_U300_GPIO_PORT1		34
+#define IRQ_U300_GPIO_PORT2		35
 
 #if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) || \
     defined(CONFIG_MACH_U300_BS335)
 /* These are for DB3150, DB3200 and DB3350 */
-#define IRQ_U300_WDOG			35
-#define IRQ_U300_EVHIST			36
-#define IRQ_U300_MSPRO			37
-#define IRQ_U300_MMCSD_MCIINTR0		38
-#define IRQ_U300_MMCSD_MCIINTR1		39
-#define IRQ_U300_I2C0			40
-#define IRQ_U300_I2C1			41
-#define IRQ_U300_RTC			42
-#define IRQ_U300_NFIF			43
-#define IRQ_U300_NFIF2			44
+#define IRQ_U300_WDOG			36
+#define IRQ_U300_EVHIST			37
+#define IRQ_U300_MSPRO			38
+#define IRQ_U300_MMCSD_MCIINTR0		39
+#define IRQ_U300_MMCSD_MCIINTR1		40
+#define IRQ_U300_I2C0			41
+#define IRQ_U300_I2C1			42
+#define IRQ_U300_RTC			43
+#define IRQ_U300_NFIF			44
+#define IRQ_U300_NFIF2			45
 #endif
 
 /* DB3150 and DB3200 have only 45 IRQs */
 #if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
-#define U300_VIC_IRQS_END		45
+#define U300_VIC_IRQS_END		46
 #endif
 
 /* The DB3350-specific interrupt lines */
 #ifdef CONFIG_MACH_U300_BS335
-#define IRQ_U300_ISP_F0			45
-#define IRQ_U300_ISP_F1			46
-#define IRQ_U300_ISP_F2			47
-#define IRQ_U300_ISP_F3			48
-#define IRQ_U300_ISP_F4			49
-#define IRQ_U300_GPIO_PORT3		50
-#define IRQ_U300_SYSCON_PLL_LOCK	51
-#define IRQ_U300_UART1			52
-#define IRQ_U300_GPIO_PORT4		53
-#define IRQ_U300_GPIO_PORT5		54
-#define IRQ_U300_GPIO_PORT6		55
-#define U300_VIC_IRQS_END		56
+#define IRQ_U300_ISP_F0			46
+#define IRQ_U300_ISP_F1			47
+#define IRQ_U300_ISP_F2			48
+#define IRQ_U300_ISP_F3			49
+#define IRQ_U300_ISP_F4			50
+#define IRQ_U300_GPIO_PORT3		51
+#define IRQ_U300_SYSCON_PLL_LOCK	52
+#define IRQ_U300_UART1			53
+#define IRQ_U300_GPIO_PORT4		54
+#define IRQ_U300_GPIO_PORT5		55
+#define IRQ_U300_GPIO_PORT6		56
+#define U300_VIC_IRQS_END		57
 #endif
 
 /* The DB3210-specific interrupt lines */
 #ifdef CONFIG_MACH_U300_BS365
-#define IRQ_U300_GPIO_PORT3		35
-#define IRQ_U300_GPIO_PORT4		36
-#define IRQ_U300_WDOG			37
-#define IRQ_U300_EVHIST			38
-#define IRQ_U300_MSPRO			39
-#define IRQ_U300_MMCSD_MCIINTR0		40
-#define IRQ_U300_MMCSD_MCIINTR1		41
-#define IRQ_U300_I2C0			42
-#define IRQ_U300_I2C1			43
-#define IRQ_U300_RTC			44
-#define IRQ_U300_NFIF			45
-#define IRQ_U300_NFIF2			46
-#define IRQ_U300_SYSCON_PLL_LOCK	47
-#define U300_VIC_IRQS_END		48
+#define IRQ_U300_GPIO_PORT3		36
+#define IRQ_U300_GPIO_PORT4		37
+#define IRQ_U300_WDOG			38
+#define IRQ_U300_EVHIST			39
+#define IRQ_U300_MSPRO			40
+#define IRQ_U300_MMCSD_MCIINTR0		41
+#define IRQ_U300_MMCSD_MCIINTR1		42
+#define IRQ_U300_I2C0			43
+#define IRQ_U300_I2C1			44
+#define IRQ_U300_RTC			45
+#define IRQ_U300_NFIF			46
+#define IRQ_U300_NFIF2			47
+#define IRQ_U300_SYSCON_PLL_LOCK	48
+#define U300_VIC_IRQS_END		49
 #endif
 
 /* Maximum 8*7 GPIO lines */
@@ -117,6 +117,6 @@
 #define IRQ_U300_GPIO_END		(U300_VIC_IRQS_END)
 #endif
 
-#define NR_IRQS				(IRQ_U300_GPIO_END)
+#define NR_IRQS				(IRQ_U300_GPIO_END - IRQ_U300_INTCON0_START)
 
 #endif
diff --git a/arch/arm/mach-ux500/mbox-db5500.c b/arch/arm/mach-ux500/mbox-db5500.c
index 2b2d51caf9d8..0127490218cd 100644
--- a/arch/arm/mach-ux500/mbox-db5500.c
+++ b/arch/arm/mach-ux500/mbox-db5500.c
@@ -168,7 +168,7 @@ static ssize_t mbox_read_fifo(struct device *dev,
 	return sprintf(buf, "0x%X\n", mbox_value);
 }
 
-static DEVICE_ATTR(fifo, S_IWUGO | S_IRUGO, mbox_read_fifo, mbox_write_fifo);
+static DEVICE_ATTR(fifo, S_IWUSR | S_IRUGO, mbox_read_fifo, mbox_write_fifo);
 
 static int mbox_show(struct seq_file *s, void *data)
 {
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
index 317e246ffc56..e834c5ef437c 100644
--- a/arch/arm/plat-samsung/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -18,6 +18,8 @@
 #ifndef __PLAT_S3C_SDHCI_H
 #define __PLAT_S3C_SDHCI_H __FILE__
 
+#include <plat/devs.h>
+
 struct platform_device;
 struct mmc_host;
 struct mmc_card;
@@ -356,4 +358,30 @@ static inline void exynos4_default_sdhci3(void) { }
 
 #endif /* CONFIG_EXYNOS4_SETUP_SDHCI */
 
+static inline void s3c_sdhci_setname(int id, char *name)
+{
+	switch (id) {
+#ifdef CONFIG_S3C_DEV_HSMMC
+	case 0:
+		s3c_device_hsmmc0.name = name;
+		break;
+#endif
+#ifdef CONFIG_S3C_DEV_HSMMC1
+	case 1:
+		s3c_device_hsmmc1.name = name;
+		break;
+#endif
+#ifdef CONFIG_S3C_DEV_HSMMC2
+	case 2:
+		s3c_device_hsmmc2.name = name;
+		break;
+#endif
+#ifdef CONFIG_S3C_DEV_HSMMC3
+	case 3:
+		s3c_device_hsmmc3.name = name;
+		break;
+#endif
+	}
+}
+
 #endif /* __PLAT_S3C_SDHCI_H */