/* * * Copyright 1995-1997 The XFree86 Project, Inc. * */ /* * The accel file for the Savage driver. * * Created 20/03/97 by Sebastien Marineau for 3.3.6 * Modified 17-Nov-2000 by Tim Roberts for 4.0.1 * Modified Feb-2004 by Alex Deucher - integrating DRI support * Revision: * */ #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "savage_driver.h" #include "savage_regs.h" #include "savage_bci.h" #include "savage_streams.h" #ifdef SAVAGEDRI #define _XF86DRI_SERVER_ #include "savage_dri.h" #endif extern int gSavageEntityIndex; /* Forward declaration of functions used in the driver */ unsigned long writedw( unsigned long addr, unsigned long value ); unsigned long readdw( unsigned long addr ); unsigned long readfb( unsigned long addr ); unsigned long writefb( unsigned long addr, unsigned long value ); void writescan( unsigned long scan, unsigned long color ); static int GetTileAperturePitch(unsigned long dwWidth, unsigned long dwBpp); void SavageSetGBD_M7(ScrnInfoPtr pScrn); void SavageSetGBD_3D(ScrnInfoPtr pScrn); void SavageSetGBD_Twister(ScrnInfoPtr pScrn); void SavageSetGBD_PM(ScrnInfoPtr pScrn); void SavageSetGBD_2000(ScrnInfoPtr pScrn); /* * This is used to cache the last known value for routines we want to * call from the debugger. */ ScrnInfoPtr gpScrn = 0; /* * returns the aperture pitch for tiled mode. * if MM850C_15 = 0 (use NB linear tile mode) the pitch is screen stride aligned to 128bytes * if MM850C_15 = 1 (use MS-1 128bit non-linear tile mode),we should do it as follows * we now only support the later, and don't use Y range flag,see tile surface register */ static int GetTileAperturePitch(unsigned long dwWidth, unsigned long dwBpp) { switch (dwBpp) { case 4: case 8: return(0x2000); break; case 16: return(0x1000); break; case 32: return(0x2000); break; default: return(0x2000); } } static int GetTileAperturePitch2000(unsigned long dwWidth, unsigned long dwBpp, int lDelta) { switch (dwBpp) { case 4: case 8: return(0x2000); break; case 16: if (lDelta > 0x800) return(0x1000); else return(0x800); break; case 32: if (lDelta > 0x1000) return(0x2000); else return(0x1000); break; default: return(0x2000); } } void SavageInitialize2DEngine(ScrnInfoPtr pScrn) { vgaHWPtr hwp = VGAHWPTR(pScrn); SavagePtr psav = SAVPTR(pScrn); unsigned int vgaCRIndex = hwp->IOBase + 4; unsigned int vgaCRReg = hwp->IOBase + 5; gpScrn = pScrn; VGAOUT16(vgaCRIndex, 0x0140); VGAOUT8(vgaCRIndex, 0x31); VGAOUT8(vgaCRReg, 0x0c); /* Setup plane masks */ OUTREG(0x8128, ~0); /* enable all write planes */ OUTREG(0x812C, ~0); /* enable all read planes */ OUTREG16(0x8134, 0x27); OUTREG16(0x8136, 0x07); switch( psav->Chipset ) { case S3_SAVAGE3D: case S3_SAVAGE_MX: /* Disable BCI */ OUTREG(0x48C18, INREG(0x48C18) & 0x3FF0); /* Setup BCI command overflow buffer */ OUTREG(0x48C14, (psav->cobOffset >> 11) | (psav->cobIndex << 29)); /* tim */ /*OUTREG(S3_OVERFLOW_BUFFER, psav->cobOffset >> 11 | 0xE0000000);*/ /* S3 */ /* Program shadow status update. */ { unsigned long thresholds = ((psav->bciThresholdLo & 0xffff) << 16) | (psav->bciThresholdHi & 0xffff); OUTREG(0x48C10, thresholds); /* used to be 0x78207220 */ } if( psav->ShadowStatus ) { OUTREG(0x48C0C, psav->ShadowPhysical | 1 ); /* Enable BCI and command overflow buffer */ OUTREG(0x48C18, INREG(0x48C18) | 0x0E); } else { OUTREG(0x48C0C, 0); /* Enable BCI and command overflow buffer */ OUTREG(0x48C18, INREG(0x48C18) | 0x0C); } break; case S3_SAVAGE4: case S3_TWISTER: case S3_PROSAVAGE: case S3_PROSAVAGEDDR: case S3_SUPERSAVAGE: /* Disable BCI */ OUTREG(0x48C18, INREG(0x48C18) & 0x3FF0); if (!psav->disableCOB) { /* Setup BCI command overflow buffer */ OUTREG(0x48C14, (psav->cobOffset >> 11) | (psav->cobIndex << 29)); } /* Program shadow status update */ /* AGD: what should this be? */ { unsigned long thresholds = ((psav->bciThresholdLo & 0x1fffe0) << 11) | ((psav->bciThresholdHi & 0x1fffe0) >> 5); OUTREG(0x48C10, thresholds); } /*OUTREG(0x48C10, 0x00700040);*/ /* tim */ /*OUTREG(0x48C10, 0x0e440f04L);*/ /* S3 */ if( psav->ShadowStatus ) { OUTREG(0x48C0C, psav->ShadowPhysical | 1 ); if (psav->disableCOB) { /* Enable BCI without the COB */ OUTREG(0x48C18, INREG(0x48C18) | 0x0a); } else { OUTREG32(0x48C18, INREG32(0x48C18) | 0x0E); } } else { OUTREG(0x48C0C, 0); if (psav->disableCOB) { /* Enable BCI without the COB */ OUTREG(0x48C18, INREG(0x48C18) | 0x08); } else { OUTREG32(0x48C18, INREG32(0x48C18) | 0x0C); } } break; case S3_SAVAGE2000: /* Disable BCI */ OUTREG(0x48C18, 0); /* Setup BCI command overflow buffer */ OUTREG(0x48C18, (psav->cobOffset >> 7) | (psav->cobIndex)); if( psav->ShadowStatus ) { /* Set shadow update threshholds. */ /*OUTREG(0x48C10, 0x6090 ); OUTREG(0x48C14, 0x70A8 );*/ OUTREG(0x48C10, psav->bciThresholdLo >> 2); OUTREG(0x48C14, psav->bciThresholdHi >> 2); /* Enable shadow status update */ OUTREG(0x48A30, psav->ShadowPhysical ); /* Enable BCI, command overflow buffer and shadow status. */ OUTREG(0x48C18, INREG(0x48C18) | 0x00380000 ); } else { /* Disable shadow status update */ OUTREG(0x48A30, 0); /* Enable BCI and command overflow buffer */ OUTREG(0x48C18, INREG(0x48C18) | 0x00280000 ); } break; } /* Use and set global bitmap descriptor. */ /* For reasons I do not fully understand yet, on the Savage4, the */ /* write to the GBD register, MM816C, does not "take" at this time. */ /* Only the low-order byte is acknowledged, resulting in an incorrect */ /* stride. Writing the register later, after the mode switch, works */ /* correctly. This needs to get resolved. */ SavageSetGBD(pScrn); } void SavageSetGBD(ScrnInfoPtr pScrn) { SavagePtr psav = SAVPTR(pScrn); UnProtectCRTC(); UnLockExtRegs(); VerticalRetraceWait(); psav->lDelta = pScrn->virtualX * (pScrn->bitsPerPixel >> 3); /* * we can use Option "DisableTile" "TRUE" to disable tile mode * if don't disable tile,we only support tile mode under 16/32bpp */ if ((!psav->bDisableTile) && ((pScrn->bitsPerPixel == 16) || (pScrn->bitsPerPixel == 32))) { /* tileing in 16/32 BPP */ psav->bTiled = TRUE; psav->lDelta = ((psav->lDelta + 127) >> 7) << 7; if (S3_SAVAGE3D_SERIES(psav->Chipset)) psav->ulAperturePitch = 0x2000; else if (psav->Chipset == S3_SAVAGE2000) psav->ulAperturePitch = GetTileAperturePitch2000(pScrn->virtualX, pScrn->bitsPerPixel, psav->lDelta); else psav->ulAperturePitch = GetTileAperturePitch(pScrn->virtualX,pScrn->bitsPerPixel); /* Use the aperture for linear screen */ psav->FBStart = psav->ApertureMap; } else { psav->bTiled = FALSE; /* 32: Alignment for nontiled mode */ psav->lDelta = ((psav->lDelta + 31) >> 5) << 5; psav->ulAperturePitch = psav->lDelta; } psav->Bpp = pScrn->bitsPerPixel >> 3; psav->cxMemory = psav->lDelta / (psav->Bpp); psav->cyMemory = psav->endfb / psav->lDelta - 1; /* ??????????? */ if (psav->cyMemory > 2048) psav->cyMemory = 2048; /* * If tiling, adjust down psav->cyMemory to the last multiple * of a tileheight, so that we don't try to use partial tiles. */ if (psav->bTiled) { psav->cyMemory -= (psav->cyMemory % 16); } /* * Initialization per GX-3. * * 1. MM48C18 - Disable BCI. * 2. MM48C0C - Enable updating shadow status * and initialize shadow memory address. * 2b. MM48C18 - bit 1 = 1, Enable Command Buffer status updates * (S3_OVERFLOW_BUFFER_PTR) * 3. MM48C10 - Initialize command buffer threshold * (S3_BUFFER_THRESHOLD) * 4. MM48C14 - Setup command buffer offset and size * (S3_OVERFLOW_BUFFER) * 5. MM816C - Enable BCI. * 6. MM48C40 - Setup tiled surface 0 register. * 7. CR31 - bit 0 = 0, Disable address offset bits(CR6A_6-0). * 8. CR50 - bit 7,6,0 = 111, Use Global Bitmap Descriptor. * 9. CR88 - bit 4 = 0, Block write on (linear mode) IFF we know we * have the right kind of SGRAM memory, * bit 4 = 1, Block write off (always off if tiling) * 10.CR69 - Bit 7 = 1, MM81C0 and 81C4 are used to control * primary stream. * 11.MM8128, MM812c - Setup read/write mask registers * 12.MM816C, MM8168 - Set up Global Bitmap Descriptor 1 and 2. */ switch (psav->Chipset) { case S3_SAVAGE3D: SavageSetGBD_3D(pScrn); break; case S3_SAVAGE_MX: SavageSetGBD_M7(pScrn); break; case S3_SAVAGE4: case S3_TWISTER: case S3_PROSAVAGE: case S3_PROSAVAGEDDR: SavageSetGBD_Twister(pScrn); break; case S3_SUPERSAVAGE: SavageSetGBD_PM(pScrn); break; case S3_SAVAGE2000: SavageSetGBD_2000(pScrn); break; } } void SavageSetGBD_Twister(ScrnInfoPtr pScrn) { SavagePtr psav = SAVPTR(pScrn); unsigned long ulTmp; unsigned char byte; int bci_enable, tile16, tile32; if (psav->Chipset == S3_SAVAGE4) { bci_enable = BCI_ENABLE; tile16 = TILE_FORMAT_16BPP; tile32 = TILE_FORMAT_32BPP; } else { bci_enable = BCI_ENABLE_TWISTER; tile16 = TILE_DESTINATION; tile32 = TILE_DESTINATION; } /* MM81C0 and 81C4 are used to control primary stream. */ OUTREG32(PSTREAM_FBADDR0_REG,0x00000000); OUTREG32(PSTREAM_FBADDR1_REG,0x00000000); /* * Program Primary Stream Stride Register. * * Tell engine if tiling on or off, set primary stream stride, and * if tiling, set tiling bits/pixel and primary stream tile offset. * Note that tile offset (bits 16 - 29) must be scanline width in * bytes/128bytespertile * 256 Qwords/tile. This is equivalent to * lDelta * 2. Remember that if tiling, lDelta is screenwidth in * bytes padded up to an even number of tilewidths. */ if (!psav->bTiled) { OUTREG32(PSTREAM_STRIDE_REG, (((psav->lDelta * 2) << 16) & 0x3FFFE000) | (psav->lDelta & 0x00001fff)); } else if (pScrn->bitsPerPixel == 16) { /* Scanline-length-in-bytes/128-bytes-per-tile * 256 Qwords/tile */ OUTREG32(PSTREAM_STRIDE_REG, (((psav->lDelta * 2) << 16) & 0x3FFFE000) | 0x80000000 | (psav->lDelta & 0x00001fff)); } else if (pScrn->bitsPerPixel == 32) { OUTREG32(PSTREAM_STRIDE_REG, (((psav->lDelta * 2) << 16) & 0x3FFFE000) | 0xC0000000 | (psav->lDelta & 0x00001fff)); } /* * CR69, bit 7 = 1 * to use MM streams processor registers to control primary stream. */ OUTREG8(CRT_ADDRESS_REG,0x69); byte = INREG8(CRT_DATA_REG) | 0x80; OUTREG8(CRT_DATA_REG,byte); OUTREG32(0x8128, 0xFFFFFFFFL); OUTREG32(0x812C, 0xFFFFFFFFL); OUTREG32(S3_BCI_GLB_BD_HIGH, bci_enable | S3_LITTLE_ENDIAN | S3_BD64); /* CR50, bit 7,6,0 = 111, Use GBD.*/ OUTREG8(CRT_ADDRESS_REG,0x50); byte = INREG8(CRT_DATA_REG) | 0xC1; OUTREG8(CRT_DATA_REG, byte); /* * if MS1NB style linear tiling mode. * bit MM850C[15] = 0 select NB linear tile mode. * bit MM850C[15] = 1 select MS-1 128-bit non-linear tile mode. */ ulTmp = INREG32(ADVANCED_FUNC_CTRL) | 0x8000; /* use MS-s style tile mode*/ OUTREG32(ADVANCED_FUNC_CTRL,ulTmp); /* * Set up Tiled Surface Registers * Bit 25:20 - Surface width in tiles. * Bit 29 - Y Range Flag. * Bit 31:30 = 00, 4 bpp. * = 01, 8 bpp. * = 10, 16 bpp. * = 11, 32 bpp. */ /* * Global Bitmap Descriptor Register MM816C - twister/prosavage * bit 24~25: tile format * 00: linear * 01: destination tiling format * 10: texture tiling format * 11: reserved * bit 28: block write disble/enable * 0: disable * 1: enable */ /* * Global Bitmap Descriptor Register MM816C - savage4 * bit 24~25: tile format * 00: linear * 01: reserved * 10: 16 bpp tiles * 11: 32 bpp tiles * bit 28: block write disable/enable * 0: enable * 1: disable */ if (!psav->bTiled) { /* * Do not enable block_write even for non-tiling modes, because * the driver cannot determine if the memory type is the certain * type of SGRAM for which block_write can be used. */ psav->GlobalBD.bd1.HighPart.ResBWTile = TILE_FORMAT_LINEAR;/* linear */ } else if (pScrn->bitsPerPixel == 16) { psav->GlobalBD.bd1.HighPart.ResBWTile = tile16; /* 16 bpp/destination tiling format */ ulTmp = (((pScrn->virtualX + 0x3F) & 0x0000FFC0) >> 6) << 20; OUTREG32(TILED_SURFACE_REGISTER_0,ulTmp | TILED_SURF_BPP16); } else if (pScrn->bitsPerPixel == 32) { psav->GlobalBD.bd1.HighPart.ResBWTile = tile32; /* 32 bpp/destination tiling format */ ulTmp = ( ((pScrn->virtualX + 0x1F) & 0x0000FFE0) >> 5) << 20; OUTREG32(TILED_SURFACE_REGISTER_0,ulTmp | TILED_SURF_BPP32); } psav->GlobalBD.bd1.HighPart.ResBWTile |= 0x10;/* disable block write - was 0 */ /* HW uses width */ psav->GlobalBD.bd1.HighPart.Stride = (unsigned short) psav->lDelta / (pScrn->bitsPerPixel >> 3); psav->GlobalBD.bd1.HighPart.Bpp = (unsigned char) (pScrn->bitsPerPixel); psav->GlobalBD.bd1.Offset = pScrn->fbOffset; /* * CR88, bit 4 - Block write enabled/disabled. * * Note: Block write must be disabled when writing to tiled * memory. Even when writing to non-tiled memory, block * write should only be enabled for certain types of SGRAM. */ OUTREG8(CRT_ADDRESS_REG,0x88); byte = INREG8(CRT_DATA_REG) | DISABLE_BLOCK_WRITE_2D; OUTREG8(CRT_DATA_REG,byte); /* * CR31, bit 0 = 0, Disable address offset bits(CR6A_6-0). * bit 0 = 1, Enable 8 Mbytes of display memory thru 64K window * at A000:0. */ OUTREG8(CRT_ADDRESS_REG,MEMORY_CONFIG_REG); /* cr31 */ byte = INREG8(CRT_DATA_REG) & (~(ENABLE_CPUA_BASE_A0000)); OUTREG8(CRT_DATA_REG,byte); /* perhaps this should be 0x0c */ /* turn on screen */ OUTREG8(SEQ_ADDRESS_REG,0x01); byte = INREG8(SEQ_DATA_REG) & ~0x20; OUTREG8(SEQ_DATA_REG,byte); /* program the GBD and SBD's */ OUTREG32(S3_GLB_BD_LOW,psav->GlobalBD.bd2.LoPart); OUTREG32(S3_GLB_BD_HIGH,psav->GlobalBD.bd2.HiPart | bci_enable | S3_LITTLE_ENDIAN | S3_BD64); OUTREG32(S3_PRI_BD_LOW,psav->GlobalBD.bd2.LoPart); OUTREG32(S3_PRI_BD_HIGH,psav->GlobalBD.bd2.HiPart); OUTREG32(S3_SEC_BD_LOW,psav->GlobalBD.bd2.LoPart); OUTREG32(S3_SEC_BD_HIGH,psav->GlobalBD.bd2.HiPart); } void SavageSetGBD_3D(ScrnInfoPtr pScrn) { SavagePtr psav = SAVPTR(pScrn); unsigned long ulTmp; unsigned char byte; int bci_enable, tile16, tile32; bci_enable = BCI_ENABLE; tile16 = TILE_FORMAT_16BPP; tile32 = TILE_FORMAT_32BPP; /* MM81C0 and 81C4 are used to control primary stream. */ OUTREG32(PSTREAM_FBADDR0_REG,0x00000000); OUTREG32(PSTREAM_FBADDR1_REG,0x00000000); /* * Program Primary Stream Stride Register. * * Tell engine if tiling on or off, set primary stream stride, and * if tiling, set tiling bits/pixel and primary stream tile offset. * Note that tile offset (bits 16 - 29) must be scanline width in * bytes/128bytespertile * 256 Qwords/tile. This is equivalent to * lDelta * 2. Remember that if tiling, lDelta is screenwidth in * bytes padded up to an even number of tilewidths. */ if (!psav->bTiled) { OUTREG32(PSTREAM_STRIDE_REG, (((psav->lDelta * 2) << 16) & 0x3FFFE000) | (psav->lDelta & 0x00001fff)); } else if (pScrn->bitsPerPixel == 16) { /* Scanline-length-in-bytes/128-bytes-per-tile * 256 Qwords/tile */ OUTREG32(PSTREAM_STRIDE_REG, (((psav->lDelta * 2) << 16) & 0x3FFFE000) | 0x80000000 | (psav->lDelta & 0x00001fff)); } else if (pScrn->bitsPerPixel == 32) { OUTREG32(PSTREAM_STRIDE_REG, (((psav->lDelta * 2) << 16) & 0x3FFFE000) | 0xC0000000 | (psav->lDelta & 0x00001fff)); } /* * CR69, bit 7 = 1 * to use MM streams processor registers to control primary stream. */ OUTREG8(CRT_ADDRESS_REG,0x69); byte = INREG8(CRT_DATA_REG) | 0x80; OUTREG8(CRT_DATA_REG,byte); OUTREG32(0x8128, 0xFFFFFFFFL); OUTREG32(0x812C, 0xFFFFFFFFL); OUTREG32(S3_BCI_GLB_BD_HIGH, bci_enable | S3_LITTLE_ENDIAN | S3_BD64); /* CR50, bit 7,6,0 = 111, Use GBD.*/ OUTREG8(CRT_ADDRESS_REG,0x50); byte = INREG8(CRT_DATA_REG) | 0xC1; OUTREG8(CRT_DATA_REG, byte); /* * if MS1NB style linear tiling mode. * bit MM850C[15] = 0 select NB linear tile mode. * bit MM850C[15] = 1 select MS-1 128-bit non-linear tile mode. */ ulTmp = INREG32(ADVANCED_FUNC_CTRL) | 0x8000; /* use MS-s style tile mode*/ OUTREG32(ADVANCED_FUNC_CTRL,ulTmp); /* * Tiled Surface 0 Registers MM48C40: * bit 0~23: tile surface 0 frame buffer offset * bit 24~29:tile surface 0 width * bit 30~31:tile surface 0 bits/pixel * 00: reserved * 01, 8 bits * 10, 16 Bits. * 11, 32 Bits. */ /* * Global Bitmap Descriptor Register MM816C * bit 24~25: tile format * 00: linear * 01: reserved * 10: 16 bpp tiles * 11: 32 bpp tiles * bit 28: block write disable/enable * 0: enable * 1: disable */ if (!psav->bTiled) { /* * Do not enable block_write even for non-tiling modes, because * the driver cannot determine if the memory type is the certain * type of SGRAM for which block_write can be used. */ psav->GlobalBD.bd1.HighPart.ResBWTile = TILE_FORMAT_LINEAR;/* linear */ } else if (pScrn->bitsPerPixel == 16) { psav->GlobalBD.bd1.HighPart.ResBWTile = tile16; /* 16 bpp/destination tiling format */ ulTmp = (((pScrn->virtualX + 0x3F) & 0x0000FFC0) >> 6) << 24; OUTREG32(TILED_SURFACE_REGISTER_0,ulTmp | TILED_SURF_BPP16); } else if (pScrn->bitsPerPixel == 32) { psav->GlobalBD.bd1.HighPart.ResBWTile = tile32; /* 32 bpp/destination tiling format */ ulTmp = ( ((pScrn->virtualX + 0x1F) & 0x0000FFE0) >> 5) << 24; OUTREG32(TILED_SURFACE_REGISTER_0,ulTmp | TILED_SURF_BPP32); } psav->GlobalBD.bd1.HighPart.ResBWTile |= 0x10;/* disable block write - was 0 */ /* HW uses width */ psav->GlobalBD.bd1.HighPart.Stride = (unsigned short) psav->lDelta / (pScrn->bitsPerPixel >> 3); psav->GlobalBD.bd1.HighPart.Bpp = (unsigned char) (pScrn->bitsPerPixel); psav->GlobalBD.bd1.Offset = pScrn->fbOffset; /* * CR88, bit 4 - Block write enabled/disabled. * * Note: Block write must be disabled when writing to tiled * memory. Even when writing to non-tiled memory, block * write should only be enabled for certain types of SGRAM. */ OUTREG8(CRT_ADDRESS_REG,0x88); byte = INREG8(CRT_DATA_REG) | DISABLE_BLOCK_WRITE_2D; OUTREG8(CRT_DATA_REG,byte); /* * CR31, bit 0 = 0, Disable address offset bits(CR6A_6-0). * bit 0 = 1, Enable 8 Mbytes of display memory thru 64K window * at A000:0. */ OUTREG8(CRT_ADDRESS_REG,MEMORY_CONFIG_REG); /* cr31 */ byte = INREG8(CRT_DATA_REG) & (~(ENABLE_CPUA_BASE_A0000)); OUTREG8(CRT_DATA_REG,byte); /* perhaps this should be 0x0c */ /* turn on screen */ OUTREG8(SEQ_ADDRESS_REG,0x01); byte = INREG8(SEQ_DATA_REG) & ~0x20; OUTREG8(SEQ_DATA_REG,byte); /* program the GBD and SBD's */ OUTREG32(S3_GLB_BD_LOW,psav->GlobalBD.bd2.LoPart); OUTREG32(S3_GLB_BD_HIGH,psav->GlobalBD.bd2.HiPart | bci_enable | S3_LITTLE_ENDIAN | S3_BD64); OUTREG32(S3_PRI_BD_LOW,psav->GlobalBD.bd2.LoPart); OUTREG32(S3_PRI_BD_HIGH,psav->GlobalBD.bd2.HiPart); OUTREG32(S3_SEC_BD_LOW,psav->GlobalBD.bd2.LoPart); OUTREG32(S3_SEC_BD_HIGH,psav->GlobalBD.bd2.HiPart); } void SavageSetGBD_M7(ScrnInfoPtr pScrn) { SavagePtr psav = SAVPTR(pScrn); unsigned long ulTmp; unsigned char byte; int bci_enable, tile16, tile32; bci_enable = BCI_ENABLE; tile16 = TILE_FORMAT_16BPP; tile32 = TILE_FORMAT_32BPP; /* following is the enable case */ /* SR01:turn off screen */ OUTREG8 (SEQ_ADDRESS_REG,0x01); byte = INREG8(SEQ_DATA_REG) | 0x20; OUTREG8(SEQ_DATA_REG,byte); /* * CR67_3: * = 1 stream processor MMIO address and stride register * are used to control the primary stream * = 0 standard VGA address and stride registers * are used to control the primary streams */ if (psav->IsPrimary) { OUTREG8(CRT_ADDRESS_REG,0x67); byte = INREG8(CRT_DATA_REG) | 0x08; OUTREG8(CRT_DATA_REG,byte); } else if (psav->IsSecondary) { /* IGA 2 */ OUTREG16(SEQ_ADDRESS_REG,SELECT_IGA2_READS_WRITES); OUTREG8(CRT_ADDRESS_REG,0x67); byte = INREG8(CRT_DATA_REG) | 0x08; OUTREG8(CRT_DATA_REG,byte); OUTREG16(SEQ_ADDRESS_REG,SELECT_IGA1); } else { OUTREG8(CRT_ADDRESS_REG,0x67); byte = INREG8(CRT_DATA_REG) | 0x08; OUTREG8(CRT_DATA_REG,byte); /* IGA 2 */ OUTREG16(SEQ_ADDRESS_REG,SELECT_IGA2_READS_WRITES); OUTREG8(CRT_ADDRESS_REG,0x67); byte = INREG8(CRT_DATA_REG) | 0x08; OUTREG8(CRT_DATA_REG,byte); OUTREG16(SEQ_ADDRESS_REG,SELECT_IGA1); } /* Set primary stream to bank 0 */ OUTREG8(CRT_ADDRESS_REG, MEMORY_CTRL0_REG);/* CRCA */ byte = INREG8(CRT_DATA_REG) & ~(MEM_PS1 + MEM_PS2) ; OUTREG8(CRT_DATA_REG,byte); #if 0 /* * if we have 8MB of frame buffer here then we must really be a 16MB * card and that means that the second device is always in the upper * bank of memory (MHS) */ if (psav->videoRambytes >= 0x800000) { /* 16MB Video Memory cursor is at the end in Bank 1 */ byte |= 0x3; OUTREG16(CRT_ADDRESS_REG, (byte << 8) | MEMORY_CTRL0_REG); } #endif /* MM81C0 and 81C4 are used to control primary stream. */ if (psav->IsPrimary) { OUTREG32(PRI_STREAM_FBUF_ADDR0,pScrn->fbOffset & 0x7fffff); OUTREG32(PRI_STREAM_FBUF_ADDR1,pScrn->fbOffset & 0x7fffff); } else if (psav->IsSecondary) { OUTREG32(PRI_STREAM2_FBUF_ADDR0,pScrn->fbOffset & 0x7fffff); OUTREG32(PRI_STREAM2_FBUF_ADDR1,pScrn->fbOffset & 0x7fffff); } else { OUTREG32(PRI_STREAM_FBUF_ADDR0,pScrn->fbOffset & 0x7fffff); OUTREG32(PRI_STREAM_FBUF_ADDR1,pScrn->fbOffset & 0x7fffff); OUTREG32(PRI_STREAM2_FBUF_ADDR0,pScrn->fbOffset & 0x7fffff); OUTREG32(PRI_STREAM2_FBUF_ADDR1,pScrn->fbOffset & 0x7fffff); } /* * Program Primary Stream Stride Register. * * Tell engine if tiling on or off, set primary stream stride, and * if tiling, set tiling bits/pixel and primary stream tile offset. * Note that tile offset (bits 16 - 29) must be scanline width in * bytes/128bytespertile * 256 Qwords/tile. This is equivalent to * lDelta * 2. Remember that if tiling, lDelta is screenwidth in * bytes padded up to an even number of tilewidths. */ if (!psav->bTiled) { if (psav->IsPrimary) { OUTREG32(PRI_STREAM_STRIDE, (((psav->lDelta * 2) << 16) & 0x3FFF0000) | (psav->lDelta & 0x00003fff)); } else if (psav->IsSecondary) { OUTREG32(PRI_STREAM2_STRIDE, (((psav->lDelta * 2) << 16) & 0x3FFF0000) | (psav->lDelta & 0x00003fff)); } else { OUTREG32(PRI_STREAM_STRIDE, (((psav->lDelta * 2) << 16) & 0x3FFF0000) | (psav->lDelta & 0x00003fff)); OUTREG32(PRI_STREAM2_STRIDE, (((psav->lDelta * 2) << 16) & 0x3FFF0000) | (psav->lDelta & 0x00003fff)); } } else if (pScrn->bitsPerPixel == 16) { /* Scanline-length-in-bytes/128-bytes-per-tile * 256 Qwords/tile */ if (psav->IsPrimary) { OUTREG32(PRI_STREAM_STRIDE, (((psav->lDelta * 2) << 16) & 0x3FFF0000) | 0x80000000 | (psav->lDelta & 0x00003fff)); } else if (psav->IsSecondary) { OUTREG32(PRI_STREAM2_STRIDE, (((psav->lDelta * 2) << 16) & 0x3FFF0000) | 0x80000000 | (psav->lDelta & 0x00003fff)); } else { OUTREG32(PRI_STREAM_STRIDE, (((psav->lDelta * 2) << 16) & 0x3FFF0000) | 0x80000000 | (psav->lDelta & 0x00003fff)); OUTREG32(PRI_STREAM2_STRIDE, (((psav->lDelta * 2) << 16) & 0x3FFF0000) | 0x80000000 | (psav->lDelta & 0x00003fff)); } } else if (pScrn->bitsPerPixel == 32) { if (psav->IsPrimary) { OUTREG32(PRI_STREAM_STRIDE, (((psav->lDelta * 2) << 16) & 0x3FFF0000) | 0xC0000000 | (psav->lDelta & 0x00003fff)); } else if (psav->IsSecondary) { OUTREG32(PRI_STREAM2_STRIDE, (((psav->lDelta * 2) << 16) & 0x3FFF0000) | 0xC0000000 | (psav->lDelta & 0x00003fff)); } else { OUTREG32(PRI_STREAM_STRIDE, (((psav->lDelta * 2) << 16) & 0x3FFF0000) | 0xC0000000 | (psav->lDelta & 0x00003fff)); OUTREG32(PRI_STREAM2_STRIDE, (((psav->lDelta * 2) << 16) & 0x3FFF0000) | 0xC0000000 | (psav->lDelta & 0x00003fff)); } } OUTREG32(0x8128, 0xFFFFFFFFL); OUTREG32(0x812C, 0xFFFFFFFFL); if (!psav->IsSecondary) OUTREG32(S3_BCI_GLB_BD_HIGH, bci_enable | S3_LITTLE_ENDIAN | S3_BD64); /* CR50, bit 7,6,0 = 111, Use GBD.*/ OUTREG8(CRT_ADDRESS_REG,0x50); byte = INREG8(CRT_DATA_REG) | 0xC1; OUTREG8(CRT_DATA_REG, byte); /* * CR78, bit 3 - Block write enabled(1)/disabled(0). * bit 2 - Block write cycle time(0:2 cycles,1: 1 cycle) * Note: Block write must be disabled when writing to tiled * memory. Even when writing to non-tiled memory, block * write should only be enabled for certain types of SGRAM. */ OUTREG8(CRT_ADDRESS_REG,0x78); /*byte = INREG8(CRT_DATA_REG) & ~0x0C;*/ byte = INREG8(CRT_DATA_REG) | 0xfb; OUTREG8(CRT_DATA_REG,byte); /* * Tiled Surface 0 Registers MM48C40: * bit 0~23: tile surface 0 frame buffer offset * bit 24~29:tile surface 0 width * bit 30~31:tile surface 0 bits/pixel * 00: reserved * 01, 8 bits * 10, 16 Bits. * 11, 32 Bits. */ /* * Global Bitmap Descriptor Register MM816C * bit 24~25: tile format * 00: linear * 01: reserved * 10: 16 bit * 11: 32 bit * bit 28: block write disble/enable * 0: enable * 1: disable */ if (!psav->bTiled) { /* * Do not enable block_write even for non-tiling modes, because * the driver cannot determine if the memory type is the certain * type of SGRAM for which block_write can be used. */ psav->GlobalBD.bd1.HighPart.ResBWTile = TILE_FORMAT_LINEAR;/* linear */ } else if (pScrn->bitsPerPixel == 16) { psav->GlobalBD.bd1.HighPart.ResBWTile = tile16;/* 16 bit */ ulTmp = ((psav->lDelta / 2) >> 6) << 24; if (psav->IsSecondary) OUTREG32(TILED_SURFACE_REGISTER_1,ulTmp | TILED_SURF_BPP16 | pScrn->fbOffset); else OUTREG32(TILED_SURFACE_REGISTER_0,ulTmp | TILED_SURF_BPP16 | pScrn->fbOffset); } else if (pScrn->bitsPerPixel == 32) { psav->GlobalBD.bd1.HighPart.ResBWTile = tile32;/* 32 bit */ ulTmp = ((psav->lDelta / 4) >> 5) << 24; if (psav->IsSecondary) OUTREG32(TILED_SURFACE_REGISTER_1,ulTmp | TILED_SURF_BPP32 | pScrn->fbOffset); else OUTREG32(TILED_SURFACE_REGISTER_0,ulTmp | TILED_SURF_BPP32 | pScrn->fbOffset); } psav->GlobalBD.bd1.HighPart.ResBWTile |= 0x10;/* disable block write */ /* HW uses width */ psav->GlobalBD.bd1.HighPart.Stride = (unsigned short)(psav->lDelta / (pScrn->bitsPerPixel >> 3)); psav->GlobalBD.bd1.HighPart.Bpp = (unsigned char) (pScrn->bitsPerPixel); psav->GlobalBD.bd1.Offset = pScrn->fbOffset; /* * CR31, bit 0 = 0, Disable address offset bits(CR6A_6-0). * bit 0 = 1, Enable 8 Mbytes of display memory thru 64K window * at A000:0. */ #if 0 OUTREG8(CRT_ADDRESS_REG,MEMORY_CONFIG_REG); /* cr31 */ byte = INREG8(CRT_DATA_REG) & (~(ENABLE_CPUA_BASE_A0000)); OUTREG8(CRT_DATA_REG,byte); #endif OUTREG8(CRT_ADDRESS_REG,MEMORY_CONFIG_REG); /* cr31 */ byte = (INREG8(CRT_DATA_REG) | 0x04) & 0xFE; OUTREG8(CRT_DATA_REG,byte); if (!psav->IsSecondary) { /* program the GBD and SBD's */ OUTREG32(S3_GLB_BD_LOW,psav->GlobalBD.bd2.LoPart ); /* 8: bci enable */ OUTREG32(S3_GLB_BD_HIGH,(psav->GlobalBD.bd2.HiPart | bci_enable | S3_LITTLE_ENDIAN | S3_BD64)); OUTREG32(S3_PRI_BD_LOW,psav->GlobalBD.bd2.LoPart); OUTREG32(S3_PRI_BD_HIGH,psav->GlobalBD.bd2.HiPart); OUTREG32(S3_SEC_BD_LOW,psav->GlobalBD.bd2.LoPart); OUTREG32(S3_SEC_BD_HIGH,psav->GlobalBD.bd2.HiPart); } /* turn on screen */ OUTREG8(SEQ_ADDRESS_REG,0x01); byte = INREG8(SEQ_DATA_REG) & ~0X20; OUTREG8(SEQ_DATA_REG,byte); } void SavageSetGBD_PM(ScrnInfoPtr pScrn) { SavagePtr psav = SAVPTR(pScrn); unsigned long ulTmp; unsigned char byte; int bci_enable, tile16, tile32; bci_enable = BCI_ENABLE_TWISTER; tile16 = TILE_DESTINATION; tile32 = TILE_DESTINATION; /* following is the enable case */ /* SR01:turn off screen */ OUTREG8 (SEQ_ADDRESS_REG,0x01); byte = INREG8(SEQ_DATA_REG) | 0x20; OUTREG8(SEQ_DATA_REG,byte); /* * CR67_3: * = 1 stream processor MMIO address and stride register * are used to control the primary stream * = 0 standard VGA address and stride registers * are used to control the primary streams */ if (psav->IsPrimary) { OUTREG8(CRT_ADDRESS_REG,0x67); byte = INREG8(CRT_DATA_REG) | 0x08; OUTREG8(CRT_DATA_REG,byte); } else if (psav->IsSecondary) { /* IGA 2 */ OUTREG16(SEQ_ADDRESS_REG,SELECT_IGA2_READS_WRITES); OUTREG8(CRT_ADDRESS_REG,0x67); byte = INREG8(CRT_DATA_REG) | 0x08; OUTREG8(CRT_DATA_REG,byte); OUTREG16(SEQ_ADDRESS_REG,SELECT_IGA1); } else { OUTREG8(CRT_ADDRESS_REG,0x67); byte = INREG8(CRT_DATA_REG) | 0x08; OUTREG8(CRT_DATA_REG,byte); /* IGA 2 */ OUTREG16(SEQ_ADDRESS_REG,SELECT_IGA2_READS_WRITES); OUTREG8(CRT_ADDRESS_REG,0x67); byte = INREG8(CRT_DATA_REG) | 0x08; OUTREG8(CRT_DATA_REG,byte); OUTREG16(SEQ_ADDRESS_REG,SELECT_IGA1); } /* * load ps1 active registers as determined by MM81C0/81C4 * load ps2 active registers as determined by MM81B0/81B4 */ OUTREG8(CRT_ADDRESS_REG,0x65); byte = INREG8(CRT_DATA_REG) | 0x03; OUTREG8(CRT_DATA_REG,byte); /* * Program Primary Stream Stride Register. * * Tell engine if tiling on or off, set primary stream stride, and * if tiling, set tiling bits/pixel and primary stream tile offset. * Note that tile offset (bits 16 - 29) must be scanline width in * bytes/128bytespertile * 256 Qwords/tile. This is equivalent to * lDelta * 2. Remember that if tiling, lDelta is screenwidth in * bytes padded up to an even number of tilewidths. */ if (!psav->bTiled) { if (psav->IsPrimary) { OUTREG32(PRI_STREAM_STRIDE, (((psav->lDelta * 2) << 16) & 0x3FFF0000) | (psav->lDelta & 0x00001fff)); } else if (psav->IsSecondary) { OUTREG32(PRI_STREAM2_STRIDE, (((psav->lDelta * 2) << 16) & 0x3FFF0000) | (psav->lDelta & 0x00001fff)); } else { OUTREG32(PRI_STREAM_STRIDE, (((psav->lDelta * 2) << 16) & 0x3FFF0000) | (psav->lDelta & 0x00001fff)); OUTREG32(PRI_STREAM2_STRIDE, (((psav->lDelta * 2) << 16) & 0x3FFF0000) | (psav->lDelta & 0x00001fff)); } } else if (pScrn->bitsPerPixel == 16) { /* Scanline-length-in-bytes/128-bytes-per-tile * 256 Qwords/tile */ if (psav->IsPrimary) { OUTREG32(PRI_STREAM_STRIDE, (((psav->lDelta * 2) << 16) & 0x3FFF0000) | 0x80000000 | (psav->lDelta & 0x00001fff)); } else if (psav->IsSecondary) { OUTREG32(PRI_STREAM2_STRIDE, (((psav->lDelta * 2) << 16) & 0x3FFF0000) | 0x80000000 | (psav->lDelta & 0x00001fff)); } else { OUTREG32(PRI_STREAM_STRIDE, (((psav->lDelta * 2) << 16) & 0x3FFF0000) | 0x80000000 | (psav->lDelta & 0x00001fff)); OUTREG32(PRI_STREAM2_STRIDE, (((psav->lDelta * 2) << 16) & 0x3FFF0000) | 0x80000000 | (psav->lDelta & 0x00001fff)); } } else if (pScrn->bitsPerPixel == 32) { if (psav->IsPrimary) { OUTREG32(PRI_STREAM_STRIDE, (((psav->lDelta * 2) << 16) & 0x3FFF0000) | 0xC0000000 | (psav->lDelta & 0x00001fff)); } else if (psav->IsSecondary) { OUTREG32(PRI_STREAM2_STRIDE, (((psav->lDelta * 2) << 16) & 0x3FFF0000) | 0xC0000000 | (psav->lDelta & 0x00001fff)); } else { OUTREG32(PRI_STREAM_STRIDE, (((psav->lDelta * 2) << 16) & 0x3FFF0000) | 0xC0000000 | (psav->lDelta & 0x00001fff)); OUTREG32(PRI_STREAM2_STRIDE, (((psav->lDelta * 2) << 16) & 0x3FFF0000) | 0xC0000000 | (psav->lDelta & 0x00001fff)); } } /* MM81C0 and 81C4 are used to control primary stream. */ if (psav->IsPrimary) { OUTREG32(PRI_STREAM_FBUF_ADDR0,pScrn->fbOffset); OUTREG32(PRI_STREAM_FBUF_ADDR1,0x80000000); } else if (psav->IsSecondary) { OUTREG32(PRI_STREAM2_FBUF_ADDR0,(pScrn->fbOffset & 0xfffffffc) | 0x80000000); OUTREG32(PRI_STREAM2_FBUF_ADDR1,pScrn->fbOffset & 0xffffffc); } else { OUTREG32(PRI_STREAM_FBUF_ADDR0,pScrn->fbOffset); OUTREG32(PRI_STREAM_FBUF_ADDR1,0x80000000); OUTREG32(PRI_STREAM2_FBUF_ADDR0,(pScrn->fbOffset & 0xfffffffc) | 0x80000000); OUTREG32(PRI_STREAM2_FBUF_ADDR1,pScrn->fbOffset & 0xffffffc); } OUTREG32(0x8128, 0xFFFFFFFFL); OUTREG32(0x812C, 0xFFFFFFFFL); if (!psav->IsSecondary) /* bit 28:block write disable */ OUTREG32(S3_GLB_BD_HIGH, bci_enable | S3_BD64 | 0x10000000); /* CR50, bit 7,6,0 = 111, Use GBD.*/ OUTREG8(CRT_ADDRESS_REG,0x50); byte = INREG8(CRT_DATA_REG) | 0xC1; OUTREG8(CRT_DATA_REG, byte); if (!psav->bTiled) { /* * Do not enable block_write even for non-tiling modes, because * the driver cannot determine if the memory type is the certain * type of SGRAM for which block_write can be used. */ psav->GlobalBD.bd1.HighPart.ResBWTile = TILE_FORMAT_LINEAR;/* linear */ } else if (pScrn->bitsPerPixel == 16) { psav->GlobalBD.bd1.HighPart.ResBWTile = tile16;/* tile format destination */ ulTmp = (((pScrn->virtualX + 0x3f) & 0x0000ffc0) >> 6) << 20; if (psav->IsSecondary) OUTREG32(TILED_SURFACE_REGISTER_1,ulTmp | TILED_SURF_BPP16 | (pScrn->fbOffset>>6)); else OUTREG32(TILED_SURFACE_REGISTER_0,ulTmp | TILED_SURF_BPP16 | (pScrn->fbOffset>>6)); } else if (pScrn->bitsPerPixel == 32) { psav->GlobalBD.bd1.HighPart.ResBWTile = tile32;/* tile format destination */ ulTmp = (((pScrn->virtualX + 0x1f) & 0x0000ffe0) >> 5) << 20; if (psav->IsSecondary) OUTREG32(TILED_SURFACE_REGISTER_1,ulTmp | TILED_SURF_BPP32 | (pScrn->fbOffset>>6)); else OUTREG32(TILED_SURFACE_REGISTER_0,ulTmp | TILED_SURF_BPP32 | (pScrn->fbOffset>>6)); } psav->GlobalBD.bd1.HighPart.ResBWTile |= 0x10;/* disable block write */ /* HW uses width */ psav->GlobalBD.bd1.HighPart.Stride = (unsigned short)(psav->lDelta / (pScrn->bitsPerPixel >> 3)); psav->GlobalBD.bd1.HighPart.Bpp = (unsigned char) (pScrn->bitsPerPixel); psav->GlobalBD.bd1.Offset = pScrn->fbOffset; /* * CR31, bit 0 = 0, Disable address offset bits(CR6A_6-0). * bit 0 = 1, Enable 8 Mbytes of display memory thru 64K window * at A000:0. */ OUTREG8(CRT_ADDRESS_REG,MEMORY_CONFIG_REG); byte = INREG8(CRT_DATA_REG) & (~(ENABLE_CPUA_BASE_A0000)); OUTREG8(CRT_DATA_REG,byte); if (!psav->IsSecondary) { /* program the GBD and SBDs */ OUTREG32(S3_GLB_BD_LOW,psav->GlobalBD.bd2.LoPart ); OUTREG32(S3_GLB_BD_HIGH,(psav->GlobalBD.bd2.HiPart | bci_enable | S3_LITTLE_ENDIAN | S3_BD64)); OUTREG32(S3_PRI_BD_LOW,psav->GlobalBD.bd2.LoPart); OUTREG32(S3_PRI_BD_HIGH,psav->GlobalBD.bd2.HiPart); OUTREG32(S3_SEC_BD_LOW,psav->GlobalBD.bd2.LoPart); OUTREG32(S3_SEC_BD_HIGH,psav->GlobalBD.bd2.HiPart); } /* turn on screen */ OUTREG8(SEQ_ADDRESS_REG,0x01); byte = INREG8(SEQ_DATA_REG) & ~0x20; OUTREG8(SEQ_DATA_REG,byte); } void SavageSetGBD_2000(ScrnInfoPtr pScrn) { SavagePtr psav = SAVPTR(pScrn); unsigned long ulTmp, ulYRange; unsigned char byte; int bci_enable, tile16, tile32; bci_enable = BCI_ENABLE_TWISTER; tile16 = TILE_DESTINATION; tile32 = TILE_DESTINATION; if (pScrn->virtualX > 1024) ulYRange = 0x40000000; else ulYRange = 0x20000000; /* following is the enable case */ /* SR01:turn off screen */ OUTREG8 (SEQ_ADDRESS_REG,0x01); byte = INREG8(SEQ_DATA_REG) | 0x20; OUTREG8(SEQ_DATA_REG,byte); /* MM81C0 and 81B0 are used to control primary stream. */ OUTREG32(PRI_STREAM_FBUF_ADDR0, pScrn->fbOffset); OUTREG32(PRI_STREAM2_FBUF_ADDR0, pScrn->fbOffset); /* * Program Primary Stream Stride Register. * * Tell engine if tiling on or off, set primary stream stride, and * if tiling, set tiling bits/pixel and primary stream tile offset. * Note that tile offset (bits 16 - 29) must be scanline width in * bytes/128bytespertile * 256 Qwords/tile. This is equivalent to * lDelta * 2. Remember that if tiling, lDelta is screenwidth in * bytes padded up to an even number of tilewidths. */ if (!psav->bTiled) { OUTREG32(PRI_STREAM_STRIDE, ((psav->lDelta << 4) & 0x7ff0)); OUTREG32(PRI_STREAM2_STRIDE, ((psav->lDelta << 4) & 0x7ff0)); } else { OUTREG32(PRI_STREAM_STRIDE, (0x80000000 |((psav->lDelta << 4) & 0x7ff0))); OUTREG32(PRI_STREAM2_STRIDE, (0x80000000 |((psav->lDelta << 4) & 0x7ff0))); } /* * CR67_3: * = 1 stream processor MMIO address and stride register * are used to control the primary stream * = 0 standard VGA address and stride registers * are used to control the primary streams */ OUTREG8(CRT_ADDRESS_REG,0x67); byte = INREG8(CRT_DATA_REG) | 0x08; OUTREG8(CRT_DATA_REG,byte); OUTREG32(0x8128, 0xFFFFFFFFL); OUTREG32(0x812C, 0xFFFFFFFFL); /* bit 28:block write disable */ OUTREG32(S3_GLB_BD_HIGH, bci_enable | S3_BD64 | 0x10000000); /* CR50, bit 7,6,0 = 111, Use GBD.*/ OUTREG8(CRT_ADDRESS_REG,0x50); byte = INREG8(CRT_DATA_REG) | 0xC1; OUTREG8(CRT_DATA_REG, byte); /* CR73 bit 5 = 0 block write disable */ OUTREG8(CRT_ADDRESS_REG,0x73); byte = INREG8(CRT_DATA_REG) & ~0x20; OUTREG8(CRT_DATA_REG, byte); if (!psav->bTiled) { /* * Do not enable block_write even for non-tiling modes, because * the driver cannot determine if the memory type is the certain * type of SGRAM for which block_write can be used. */ psav->GlobalBD.bd1.HighPart.ResBWTile = TILE_FORMAT_LINEAR;/* linear */ } else if (pScrn->bitsPerPixel == 16) { psav->GlobalBD.bd1.HighPart.ResBWTile = tile16;/* tile format destination */ ulTmp = (((pScrn->virtualX + 0x3f) & 0x0000ffc0) >> 6) << 23; OUTREG32(TILED_SURFACE_REGISTER_0,ulTmp | TILED_SURF_BPP16_2000 | ulYRange); ulTmp |= (TILED_SURF_BPP16_2000 | ulYRange); OUTREG32(PRI_STREAM_STRIDE, ((ulTmp >> 19) & 0x03f0) | 0x80000000); OUTREG32(PRI_STREAM2_STRIDE, ((ulTmp >> 19) & 0x03f0) | 0x80000000); } else if (pScrn->bitsPerPixel == 32) { psav->GlobalBD.bd1.HighPart.ResBWTile = tile32;/* tile format destination */ ulTmp = (((pScrn->virtualX + 0x1f) & 0x0000ffe0) >> 5) << 23; OUTREG32(TILED_SURFACE_REGISTER_0,ulTmp | TILED_SURF_BPP32_2000 | ulYRange); ulTmp |= (TILED_SURF_BPP32_2000 | ulYRange); OUTREG32(PRI_STREAM_STRIDE, ((ulTmp >> 19) & 0x03f0) | 0x80000000); OUTREG32(PRI_STREAM2_STRIDE, ((ulTmp >> 19) & 0x03f0) | 0x80000000); } psav->GlobalBD.bd1.HighPart.ResBWTile |= 0x10;/* disable block write */ /* HW uses width */ psav->GlobalBD.bd1.HighPart.Stride = (unsigned short)(psav->lDelta / (pScrn->bitsPerPixel >> 3)); psav->GlobalBD.bd1.HighPart.Bpp = (unsigned char) (pScrn->bitsPerPixel); psav->GlobalBD.bd1.Offset = pScrn->fbOffset; /* * CR31, bit 0 = 0, Disable address offset bits(CR6A_6-0). * bit 0 = 1, Enable 8 Mbytes of display memory thru 64K window * at A000:0. */ OUTREG8(CRT_ADDRESS_REG,MEMORY_CONFIG_REG); byte = INREG8(CRT_DATA_REG) & (~(ENABLE_CPUA_BASE_A0000)); OUTREG8(CRT_DATA_REG,byte); /* program the GBD and SBDs */ OUTREG32(S3_GLB_BD_LOW,psav->GlobalBD.bd2.LoPart ); OUTREG32(S3_GLB_BD_HIGH,(psav->GlobalBD.bd2.HiPart | bci_enable | S3_LITTLE_ENDIAN | S3_BD64)); OUTREG32(S3_PRI_BD_LOW,psav->GlobalBD.bd2.LoPart); OUTREG32(S3_PRI_BD_HIGH,psav->GlobalBD.bd2.HiPart); OUTREG32(S3_SEC_BD_LOW,psav->GlobalBD.bd2.LoPart); OUTREG32(S3_SEC_BD_HIGH,psav->GlobalBD.bd2.HiPart); /* turn on screen */ OUTREG8(SEQ_ADDRESS_REG,0x01); byte = INREG8(SEQ_DATA_REG) & ~0x20; OUTREG8(SEQ_DATA_REG,byte); } #if 0 static void SavageRestoreAccelState(ScrnInfoPtr pScrn) { SavagePtr psav = SAVPTR(pScrn); psav->WaitIdleEmpty(psav); return; } #endif /* Acceleration init function, sets up pointers to our accelerated functions */ Bool SavageInitAccel(ScreenPtr pScreen) { ScrnInfoPtr pScrn = xf86Screens[pScreen->myNum]; SavagePtr psav = SAVPTR(pScrn); #ifdef SAVAGEDRI if (psav->directRenderingEnabled) { SAVAGEDRIServerPrivatePtr pSAVAGEDRIServer = psav->DRIServerInfo; int cpp = pScrn->bitsPerPixel / 8; int widthBytes = psav->lDelta; int bufferSize = ((pScrn->virtualY * widthBytes + SAVAGE_BUFFER_ALIGN) & ~SAVAGE_BUFFER_ALIGN); int tiledWidth, tiledwidthBytes,tiledBufferSize; pSAVAGEDRIServer->frontbufferSize = bufferSize; tiledwidthBytes = psav->lDelta; tiledWidth = tiledwidthBytes / cpp; if (cpp == 2) { tiledBufferSize = ((pScrn->virtualX+63)/64)*((pScrn->virtualY+15)/16) *2048; } else { tiledBufferSize = ((pScrn->virtualX+31)/32)*((pScrn->virtualY+15)/16) *2048; } /*set Depth buffer to 32bpp*/ /*tiledwidthBytes_Z = ((pScrn->virtualX + 31)& ~0x0000001F)*4; tiledBufferSize_Z = ((pScrn->virtualX+31)/32)*((pScrn->virtualY+15)/16) *2048;*/ pSAVAGEDRIServer->backbufferSize = tiledBufferSize; /*pSAVAGEDRIServer->depthbufferSize = tiledBufferSize_Z;*/ pSAVAGEDRIServer->depthbufferSize = tiledBufferSize; xf86DrvMsg(pScrn->scrnIndex,X_INFO, "virtualX:%d,virtualY:%d\n", pScrn->virtualX,pScrn->virtualY); xf86DrvMsg( pScrn->scrnIndex, X_INFO, "bpp:%d,tiledwidthBytes:%d,tiledBufferSize:%d \n", pScrn->bitsPerPixel, tiledwidthBytes,tiledBufferSize); xf86DrvMsg( pScrn->scrnIndex, X_INFO, "bpp:%d,widthBytes:%d,BufferSize:%d \n", pScrn->bitsPerPixel, widthBytes,bufferSize); pSAVAGEDRIServer->frontOffset = pScrn->fbOffset; /* 0 */ pSAVAGEDRIServer->frontPitch = widthBytes; /* Try for front, back, depth, and two framebuffers worth of * pixmap cache. Should be enough for a fullscreen background * image plus some leftovers. */ /* pSAVAGEDRIServer->textureSize = psav->videoRambytes - tiledBufferSize - tiledBufferSize_Z - -0x602000;*/ pSAVAGEDRIServer->textureSize = psav->videoRambytes - 4096 - /* hw cursor*/ psav->cobSize - /*COB*/ bufferSize- tiledBufferSize - tiledBufferSize - 0x200000; xf86DrvMsg( pScrn->scrnIndex, X_INFO, "videoRambytes:0x%08x \n", psav->videoRambytes); xf86DrvMsg( pScrn->scrnIndex, X_INFO, "textureSize:0x%08x \n", pSAVAGEDRIServer->textureSize); /* If that gives us less than half the available memory, let's * be greedy and grab some more. Sorry, I care more about 3D * performance than playing nicely, and you'll get around a full * framebuffer's worth of pixmap cache anyway. */ #if 0 if ( pSAVAGEDRIServer->textureSize < (int)psav->FbMapSize / 2 ) { pSAVAGEDRIServer->textureSize = psav->FbMapSize - 4 * bufferSize; } #endif /* Check to see if there is more room available after the maximum * scanline for textures. */ #if 0 if ( (int)psav->FbMapSize - maxlines * widthBytes - bufferSize * 2 > pSAVAGEDRIServer->textureSize ) { pSAVAGEDRIServer->textureSize = (psav->FbMapSize - maxlines * widthBytes - bufferSize * 2); } #endif /* Set a minimum usable local texture heap size. This will fit * two 256x256x32bpp textures. */ if ( pSAVAGEDRIServer->textureSize < 512 * 1024 ) { pSAVAGEDRIServer->textureOffset = 0; pSAVAGEDRIServer->textureSize = 0; } xf86DrvMsg( pScrn->scrnIndex, X_INFO, "textureSize:0x%08x \n", pSAVAGEDRIServer->textureSize); /* Reserve space for textures */ /* if (pSAVAGEDRIServer->textureSize)*/ pSAVAGEDRIServer->textureOffset = (psav->videoRambytes - 4096 - /* hw cursor*/ psav->cobSize - /*COB*/ pSAVAGEDRIServer->textureSize) & ~SAVAGE_BUFFER_ALIGN; xf86DrvMsg( pScrn->scrnIndex, X_INFO, "textureOffset:0x%08x \n", pSAVAGEDRIServer->textureOffset); /* Reserve space for the shared depth buffer */ /*pSAVAGEDRIServer->depthOffset = (pSAVAGEDRIServer->textureOffset - tiledBufferSize_Z + SAVAGE_BUFFER_ALIGN) & ~SAVAGE_BUFFER_ALIGN; */ pSAVAGEDRIServer->depthOffset = (pSAVAGEDRIServer->textureOffset - tiledBufferSize) & ~SAVAGE_BUFFER_ALIGN; /*pSAVAGEDRIServer->depthPitch = tiledwidthBytes_Z;*/ pSAVAGEDRIServer->depthPitch = tiledwidthBytes; xf86DrvMsg( pScrn->scrnIndex, X_INFO, "depthOffset:0x%08x,depthPitch:%d\n", pSAVAGEDRIServer->depthOffset,pSAVAGEDRIServer->depthPitch); /* Reserve space for the shared back buffer */ pSAVAGEDRIServer->backOffset = (pSAVAGEDRIServer->depthOffset - tiledBufferSize ) & ~SAVAGE_BUFFER_ALIGN; pSAVAGEDRIServer->backPitch = tiledwidthBytes; xf86DrvMsg( pScrn->scrnIndex, X_INFO, "backOffset:0x%08x,backPitch:%d\n", pSAVAGEDRIServer->backOffset,pSAVAGEDRIServer->backPitch); /* Compute bitmap descriptors for front, back and depth buffers */ if ((psav->Chipset == S3_TWISTER) || (psav->Chipset == S3_PROSAVAGE) || (psav->Chipset == S3_PROSAVAGEDDR) || (psav->Chipset == S3_SUPERSAVAGE)) { pSAVAGEDRIServer->frontBitmapDesc = BCI_BD_BW_DISABLE | /* block write disabled */ (1<<24) | /* destination tile format */ (pScrn->bitsPerPixel<<16) | /* bpp */ tiledWidth; /* stride */ pSAVAGEDRIServer->backBitmapDesc = BCI_BD_BW_DISABLE | (1<<24) | (pScrn->bitsPerPixel<<16) | tiledWidth; pSAVAGEDRIServer->depthBitmapDesc = BCI_BD_BW_DISABLE | (1<<24) | (pScrn->bitsPerPixel<<16) | /* FIXME: allow zpp != cpp */ tiledWidth; } else { pSAVAGEDRIServer->frontBitmapDesc = BCI_BD_BW_DISABLE | /* block write disabled */ (cpp==2 ? BCI_BD_TILE_16:BCI_BD_TILE_32) | /*16/32 bpp tile format */ (pScrn->bitsPerPixel<<16) | /* bpp */ tiledWidth; /* stride */ pSAVAGEDRIServer->backBitmapDesc = BCI_BD_BW_DISABLE | (cpp==2 ? BCI_BD_TILE_16:BCI_BD_TILE_32) | (pScrn->bitsPerPixel<<16) | tiledWidth; pSAVAGEDRIServer->depthBitmapDesc = BCI_BD_BW_DISABLE | (cpp==2 ? BCI_BD_TILE_16:BCI_BD_TILE_32) | (pScrn->bitsPerPixel<<16) | /* FIXME: allow zpp != cpp */ tiledWidth; } /*scanlines = pSAVAGEDRIServer->backOffset / widthBytes - 1;*/ /*if ( scanlines > maxlines ) scanlines = maxlines;*/ /* CR47983, XvMC do not work on system with frame buffer less than 32MB. * VBE reports frame buffer size a little less than 16MB, this makes the condition * truns out FALSE. * Now just reduce the level to 14.5MB, things should be OK, while the hwmc frame buffer layout * caculation need more understanding and should be fixed. */ /*if total memory is less than 16M, there is no HWMC support */ if((psav->videoRambytes < /*16*/(14*1024+512)*1024L) || psav->bDisableXvMC) { psav->hwmcOffset = 0; psav->hwmcSize = 0; } else { psav->hwmcSize = (10*1024+512)*1024; /* HWMC needs 10MB FB */ psav->hwmcOffset = (psav->videoRambytes - 0x2000 - psav->hwmcSize) & ~SAVAGE_BUFFER_ALIGN; if (psav->hwmcOffset < bufferSize) { /* If hwmc buffer will lay in on-screen buffer. */ psav->hwmcSize = 0; psav->hwmcOffset = 0; } } /* CR48438: Title: "Lots of garbage appear on the background when * drag the DVD player XINE window at 1024x768 or higher mode." * hwmc used xserver's memory, now xserver will get less memory. * Both 3D and hwmc's memory usage are considered now. */ #if 0 if (pSAVAGEDRIServer->backOffset < psav->hwmcOffset ) psav->cyMemory = pSAVAGEDRIServer->backOffset / widthBytes - 1; else psav->cyMemory = psav->hwmcOffset / widthBytes -1; #endif psav->cyMemory = pSAVAGEDRIServer->backOffset / widthBytes - 1; if (psav->cyMemory > 0x7FFF) { psav->cyMemory = 0x7FFF; } psav->EXAendfb = pSAVAGEDRIServer->backOffset & ~SAVAGE_BUFFER_ALIGN; xf86DrvMsg( pScrn->scrnIndex, X_INFO, "Reserved back buffer at offset 0x%x\n", pSAVAGEDRIServer->backOffset ); xf86DrvMsg( pScrn->scrnIndex, X_INFO, "Reserved depth buffer at offset 0x%x\n", pSAVAGEDRIServer->depthOffset ); xf86DrvMsg( pScrn->scrnIndex, X_INFO, "Reserved %d kb for textures at offset 0x%x\n", pSAVAGEDRIServer->textureSize/1024, pSAVAGEDRIServer->textureOffset ); } else #endif { /* * why this code? because BoxRec members are short int * if cyMemory is bigger than 0x7fff,then it will overflow */ if (psav->cyMemory > 0x7FFF) { psav->cyMemory = 0x7FFF; } if (psav->IsPrimary) { psav->EXAendfb = psav->videoRambytes - 4096 - /* hw cursor*/ 0x200000; } else { psav->EXAendfb = psav->videoRambytes - 4096 - /* hw cursor*/ psav->cobSize - /*COB*/ 0x200000; } } if (psav->useEXA) return SavageEXAInit(pScreen); else return SavageXAAInit(pScreen); } int SavageGetCopyROP(int rop) { int ALUCopyROP[16] = { 0x00, /*ROP_0 GXclear */ 0x88, /*ROP_DSa GXand */ 0x44, /*ROP_SDna GXandReverse */ 0xCC, /*ROP_S GXcopy */ 0x22, /*ROP_DSna GXandInverted */ 0xAA, /*ROP_D GXnoop */ 0x66, /*ROP_DSx GXxor */ 0xEE, /*ROP_DSo GXor */ 0x11, /*ROP_DSon GXnor */ 0x99, /*ROP_DSxn GXequiv */ 0x55, /*ROP_Dn GXinvert*/ 0xDD, /*ROP_SDno GXorReverse */ 0x33, /*ROP_Sn GXcopyInverted */ 0xBB, /*ROP_DSno GXorInverted */ 0x77, /*ROP_DSan GXnand */ 0xFF, /*ROP_1 GXset */ }; return (ALUCopyROP[rop]); } /* Routines for debugging. */ unsigned long writedw( unsigned long addr, unsigned long value ) { SavagePtr psav = SAVPTR(gpScrn); OUTREG( addr, value ); return INREG( addr ); } unsigned long readdw( unsigned long addr ) { SavagePtr psav = SAVPTR(gpScrn); return INREG( addr ); } unsigned long readfb( unsigned long addr ) { SavagePtr psav = SAVPTR(gpScrn); char * videobuffer = (char *) psav->FBBase; return *(volatile unsigned long*)(videobuffer + (addr & ~3) ); } unsigned long writefb( unsigned long addr, unsigned long value ) { SavagePtr psav = SAVPTR(gpScrn); char * videobuffer = (char *) psav->FBBase; *(unsigned long*)(videobuffer + (addr & ~3)) = value; return *(volatile unsigned long*)(videobuffer + (addr & ~3) ); } void writescan( unsigned long scan, unsigned long color ) { SavagePtr psav = SAVPTR(gpScrn); int i; char * videobuffer = (char *)psav->FBBase; videobuffer += scan * gpScrn->displayWidth * gpScrn->bitsPerPixel >> 3; for( i = gpScrn->displayWidth; --i; ) { switch( gpScrn->bitsPerPixel ) { case 8: *videobuffer++ = color; break; case 16: *(CARD16 *)videobuffer = color; videobuffer += 2; break; case 32: *(CARD32 *)videobuffer = color; videobuffer += 4; break; } } }