summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)AuthorFilesLines
2013-07-24[SCSI] isci: fix breakage caused by >16byte CDB patchJames Bottomley1-1/+1
Oops, apparently no-one I cc'd at intel actually bothered to check this patch for the isci driver: commit e73823f7a2c921dcf068d34ea03bd682498d9e42 Author: James Bottomley <JBottomley@Parallels.com> Date: Tue May 7 15:38:18 2013 -0700 [SCSI] libsas: implement > 16 byte CDB support sci_swab32_cpy needs multiples of four, so for commands that aren't that, it's rounding the wrong way. fix by doing (len+3)/4 instead of len/4. Reported-by: Tony Luck <tony.luck@intel.com> Tested-by: Tony Luck <tony.luck@intel.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-07-24Merge branch 'merge' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull powerpc fixes from Ben Herrenschmidt: "Here is a series of powerpc fixes. It's a bit big, mostly because of the series of 11 "EEH" patches from Gavin. The EEH (Our IBM specific PCI/PCIe Enhanced Error Handling) code had been rotting for a while and this merge window saw a significant rework & fixing of it by Gavin Shan. However, that wasn't complete and left some open issues. There were still a few corner cases that didn't work properly, for example in relation to hotplug and devices without explicit error handlers. We had some patches but they weren't quite good enough yet so I left them off the 3.11 merge window. Gavin since then fixed it all up, we ran quite a few rounds of testing and it seems fairly solid (at least probably more than it has ever been). This should probably have made -rc1 but both Gavin and I took some vacation so it had to wait for -rc2. The rest is more bug fixes, mostly to new features recently added, for example, we missed the cpu table entry for one of the two models of P8 (we didn't realize they had different PVR [Processor Version Register] values), some module CRC issues, etc..." * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (23 commits) powerpc/perf: BHRB filter configuration should follow the task powerpc/perf: Ignore separate BHRB privilege state filter request powerpc/powernv: Mark pnv_pci_init_ioda2_phb() as __init powerpc/mm: Use the correct SLB(LLP) encoding in tlbie instruction powerpc/mm: Fix fallthrough bug in hpte_decode powerpc/pseries: Fix a typo in pSeries_lpar_hpte_insert() powerpc/eeh: Introdce flag to protect sysfs powerpc/eeh: Fix unbalanced enable for IRQ powerpc/eeh: Don't use pci_dev during BAR restore powerpc/eeh: Use partial hotplug for EEH unaware drivers powerpc/pci: Partial tree hotplug support powerpc/eeh: Use safe list traversal when walking EEH devices powerpc/eeh: Keep PE during hotplug powerpc/pci/hotplug: Don't need to remove from EEH cache twice powerpc/pci: Override pcibios_release_device() powerpc/eeh: Export functions for hotplug powerpc/eeh: Remove reference to PCI device powerpc: Fix the corrupt r3 error during MCE handling. powerpc/perf: Set PPC_FEATURE2_EBB when we register the power8 PMU powerpc/pseries: Drop "select HOTPLUG" ...
2013-07-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds1-1/+1
Pull crypto fixes from Herbert Xu: "This push fixes a memory corruption issue in caam, as well as reverting the new optimised crct10dif implementation as it breaks boot on initrd systems. Hopefully crct10dif will be reinstated once the supporting code is added so that it doesn't break boot" * git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: Revert "crypto: crct10dif - Wrap crc_t10dif function all to use crypto transform framework" crypto: caam - Fixed the memory out of bound overwrite issue
2013-07-24MAINTAINERS: Update the list of maintainers for staging/comedi driver.Lidza Louina1-1/+1
This patch updates the list of maintainers for the staging/comedi driver. Signed-off-by: Lidza Louina <lidza.louina@gmail.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-24staging: tidspbridge: replace strict_strtol() with kstrtos32()Jingoo Han1-2/+5
The usage of strict_strtol() is not preferred, because strict_strtol() is obsolete. Thus, kstrtos32() should be used in order to convert a string to s32. Also, error handling is added to get rid of a __must_check warning. This fixes a memory corruption bug as well. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-24ahci_imx: add ahci sata support on imx platformsRichard Zhu3-0/+246
imx6q contains one Synopsys AHCI SATA controller, But it can't share ahci_platform driver with other controllers because there are some misalignments of the generic AHCI controller - the bits definitions of the HBA registers, the Vendor Specific registers, the AHCI PHY clock and the AHCI signals adjustment window(GPR13 register). - CAP_SSS(bit20) of the HOST_CAP is writable, default value is '0', should be configured to be '1' - bit0 (only one AHCI SATA port on imx6q) of the HOST_PORTS_IMPL should be set to be '1'.(default 0) - One Vendor Specific register HOST_TIMER1MS(offset:0xe0) should be configured regarding to the frequency of AHB bus clock. - Configurations of the AHCI PHY clock, and the signal parameters of the GPR13 Setup its own ahci sata driver, contained the imx6q specific initialized codes, re-use the generic ahci_platform driver, and keep the generic ahci_platform driver clean as much as possible. tj: patch description reformatted Signed-off-by: Richard Zhu <r65037@freescale.com> Reviewed-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-07-24powerpc/pci/hotplug: Don't need to remove from EEH cache twiceGavin Shan1-1/+0
Since pcibios_release_device() called by pci_stop_and_remove_bus_device() has removed the device from the EEH cache, we needn't do that again. Cc: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2013-07-23Merge tag 'please-pull-bp-edac' of ↵Linus Torvalds3-14/+25
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC fix from Tony Luck: "Fix EDAC lockdep splat" * tag 'please-pull-bp-edac' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC: Fix lockdep splat
2013-07-23mei: me: fix waiting for hw readyTomas Winkler1-3/+7
1. MEI_INTEROP_TIMEOUT is in seconds not in jiffies so we use mei_secs_to_jiffies macro While cold boot is fast this is relevant in resume 2. wait_event_interruptible_timeout can return with -ERESTARTSYS so do not override it with -ETIMEDOUT 3.Adjust error message Tested-by: Shuah Khan <shuah.kh@samsung.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23mei: don't have to clean the state on power upTomas Winkler1-1/+2
When powering up, we don't have to clean up the device state nothing is connected. Tested-by: Shuah Khan <shuah.kh@samsung.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23mei: me: fix reset state machineTomas Winkler1-1/+3
ME HW ready bit is down after hw reset was asserted or on error. Only on error we need to enter the reset flow, additional reset need to be prevented when reset was triggered during initialization , power up/down or a reset is already in progress Tested-by: Shuah Khan <shuah.kh@samsung.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23mei: hbm: fix typo in error messageTomas Winkler1-1/+1
writet -> write Tested-by: Shuah Khan <shuah.kh@samsung.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-24qxl: convert qxl driver to proper use for reservationsDave Airlie10-464/+676
The recent addition of lockdep support to reservations and their subsequent use by TTM showed up a number of potential problems with the way qxl was using TTM objects. a) it was allocating objects, and reserving them later without validating underneath the reservation, which meant in extreme conditions the objects could be evicted before the reservation ever used them. b) it was reserving objects straight after allocating them, but with no ability to back off should the reservations fail. It now allocates the necessary objects then does a complete reservation pass on them to avoid deadlocks. c) it had two lists per release tracking objects, unnecessary complicating the reservation process. This patch removes the dual object tracking, adds reservations ticket support to the release and fence object handling. It then ports the internal fb drawing code and the userspace facing ioctl to use the new interfaces properly, along with cleanup up the error path handling in some codepaths. Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-07-24qxl: allow creation of pre-pinned objects and use for releases.Dave Airlie7-24/+20
In order to fix an issue with reservations we need to create the releases as pre-pinned objects, this changes the placement interface and bo creation interface to allow creating pinned objects to save nested reservations later. This is just a stepping stone to main fix which follows to actually fix how qxl deals with reservations. Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-07-24drm/qxl: add delayed fb operationsDave Airlie2-21/+164
Due to the nature of qxl hw we cannot queue operations while in an irq context, so we queue these operations as best we can until atomic allocations fail, and dequeue them later in a work queue. Daniel looked over the locking on the list and agrees it should be sufficent. The atomic allocs use no warn, as the last thing we want if we haven't memory to allocate space for a printk in an irq context is more printks. Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-07-23usb: option: add TP-LINK MA260Bjørn Mork1-0/+2
Signed-off-by: Bjørn Mork <bjorn@mork.no> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23Merge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds1-2/+4
Pull device tree bug fixes and maintainership updates from Grant Likely: "This branch contains a couple of minor bug fixes and documentation additions, but the bulk of it are several changes to the MAINTAINERS file regarding the subsystems I've been involved with" * tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux: of/irq: init struct resource to 0 in of_irq_to_resource() of/irq: Avoid calling list_first_entry() for empty list of: add vendor prefixes for hisilicon of: add vendor prefix for Qualcomm Atheros, Inc. MAINTAINERS: Fix incorrect status tag MAINTAINERS: Refactor device tree maintainership MAINTAINERS: Change device tree mailing list MAINTAINERS: Remove Grant Likely
2013-07-23EDAC: Fix lockdep splatBorislav Petkov3-14/+25
Fix the following: BUG: key ffff88043bdd0330 not in .data! ------------[ cut here ]------------ WARNING: at kernel/lockdep.c:2987 lockdep_init_map+0x565/0x5a0() DEBUG_LOCKS_WARN_ON(1) Modules linked in: glue_helper sb_edac(+) edac_core snd acpi_cpufreq lrw gf128mul ablk_helper iTCO_wdt evdev i2c_i801 dcdbas button cryptd pcspkr iTCO_vendor_support usb_common lpc_ich mfd_core soundcore mperf processor microcode CPU: 2 PID: 599 Comm: modprobe Not tainted 3.10.0 #1 Hardware name: Dell Inc. Precision T3600/0PTTT9, BIOS A08 01/24/2013 0000000000000009 ffff880439a1d920 ffffffff8160a9a9 ffff880439a1d958 ffffffff8103d9e0 ffff88043af4a510 ffffffff81a16e11 0000000000000000 ffff88043bdd0330 0000000000000000 ffff880439a1d9b8 ffffffff8103dacc Call Trace: dump_stack warn_slowpath_common warn_slowpath_fmt lockdep_init_map ? trace_hardirqs_on_caller ? trace_hardirqs_on debug_mutex_init __mutex_init bus_register edac_create_sysfs_mci_device edac_mc_add_mc sbridge_probe pci_device_probe driver_probe_device __driver_attach ? driver_probe_device bus_for_each_dev driver_attach bus_add_driver driver_register __pci_register_driver ? 0xffffffffa0010fff sbridge_init ? 0xffffffffa0010fff do_one_initcall load_module ? unset_module_init_ro_nx SyS_init_module tracesys ---[ end trace d24a70b0d3ddf733 ]--- EDAC MC0: Giving out device to 'sbridge_edac.c' 'Sandy Bridge Socket#0': DEV 0000:3f:0e.0 EDAC sbridge: Driver loaded. What happens is that bus_register needs a statically allocated lock_key because the last is handed in to lockdep. However, struct mem_ctl_info embeds struct bus_type (the whole struct, not a pointer to it) and the whole thing gets dynamically allocated. Fix this by using a statically allocated struct bus_type for the MC bus. Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: stable@kernel.org # v3.10 Signed-off-by: Tony Luck <tony.luck@intel.com>
2013-07-23Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds25-130/+242
Pull drm fixes from Dave Airlie: "This is just a regular fixes pull, mostly nouveau and i915, the i915 ones fix RC6 on Sandybridge after suspend/resume, which I think people have be wanting for quite a while! Now you shouldn't wish for more patches, as the new mutex/reservation code found a number of problems with the qxl driver, and it currently makes lockdep angry, I'm working on a set of fixes for it, but its a bit large, I'll submit them separately later today or tomorrow once I've banged on them a bit more, just warning you in advance :-)" Yeah, I'm definitely over the whole "wish for more patches" thing. * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/crtc-helper: explicit DPMS on after modeset drm/i915: fix up gt init sequence fallout drm/i915: Serialize almost all register access drm/i915: quirk no PCH_PWM_ENABLE for Dell XPS13 backlight drm/i915: correctly restore fences with objects attached drm/i915: Fix dereferencing invalid connectors in is_crtc_connector_off() drm/i915: Sanitize shared dpll state drm/i915: fix long-standing SNB regression in power consumption after resume v2 drm/i915: Preserve the DDI_A_4_LANES bit from the bios drm/i915: fix pfit regression for non-autoscaled resolutions drm/i915: fix up readout of the lvds dither bit on gen2/3 drm/nouveau: do not allow negative sizes for now drm/nouveau: add falcon interrupt handler drm/nouveau: use dedicated channel for async moves on GT/GF chipsets. drm/nouveau: bump fence timeout to 15 seconds drm/nouveau: do not unpin in nouveau_gem_object_del drm/nv50/kms: fix pin refcnt leaks drm/nouveau: fix some error-path leaks in fbcon handling code drm/nouveau: fix locking issues in page flipping paths
2013-07-23[SCSI] mvsas: Fix kernel panic on tile due to unaligned data accessJames Bottomley2-3/+9
slot->response is a 64 bit quantity (and accessed as such), but its alignment is only 32 bits. This doesn't cause a problem on x86, but apparently causes a kernel panic on Tile: Stack dump complete Kernel panic - not syncing: Kernel unalign fault running the idle task! Starting stack dump of tid 0, pid 0 (swapper) on cpu 1 at cycle 341586172541 frame 0: 0xfffffff700140ee0 dump_stack+0x0/0x20 (sp 0xfffffe43ffedf420) frame 1: 0xfffffff700283270 panic+0x150/0x3a0 (sp 0xfffffe43ffedf420) frame 2: 0xfffffff70012bff8 jit_bundle_gen+0xfd8/0x27e0 (sp 0xfffffe43ffedf4c8) frame 3: 0xfffffff7003b5b68 do_unaligned+0xc0/0x5a0 (sp 0xfffffe43ffedf710) frame 4: 0xfffffff70044ca78 handle_interrupt+0x270/0x278 (sp 0xfffffe43ffedf840) <interrupt 17 while in kernel mode> frame 5: 0xfffffff7002ac370 mvs_slot_complete+0x5f0/0x12a0 (sp 0xfffffe43ffedfa90) frame 6: 0xfffffff7002abec0 mvs_slot_complete+0x140/0x12a0 (sp 0xfffffe43ffedfa90) frame 7: 0xfffffff7005cc840 mvs_int_rx+0x140/0x2a0 (sp 0xfffffe43ffedfb00) frame 8: 0xfffffff7005bbaf0 mvs_94xx_isr+0xd8/0x2b8 (sp 0xfffffe43ffedfb68) frame 9: 0xfffffff700658ba0 mvs_tasklet+0x128/0x1f8 (sp 0xfffffe43ffedfba8) frame 10: 0xfffffff7003e8230 tasklet_action+0x178/0x2c8 (sp 0xfffffe43ffedfbe0) frame 11: 0xfffffff700103850 __do_softirq+0x210/0x398 (sp 0xfffffe43ffedfc40) frame 12: 0xfffffff700180308 do_softirq+0xc8/0x140 (sp 0xfffffe43ffedfcd8) frame 13: 0xfffffff7000bd7f0 irq_exit+0xb0/0x158 (sp 0xfffffe43ffedfcf0) frame 14: 0xfffffff70013fa58 tile_dev_intr+0x1d8/0x2f0 (sp 0xfffffe43ffedfd00) frame 15: 0xfffffff70044ca78 handle_interrupt+0x270/0x278 (sp 0xfffffe43ffedfd40) <interrupt 30 while in kernel mode> frame 16: 0xfffffff700143e68 _cpu_idle_nap+0x0/0x18 (sp 0xfffffe43ffedffb0) frame 17: 0xfffffff700482480 cpu_idle+0x310/0x428 (sp 0xfffffe43ffedffb0) Since the check is just for non-zero, split it to be two 32 bit accesses (preserving speed in the fast path) and do a get_unaligned() in the slow path. This is a modification of a wholly get_unaligned patch submitted by Paul Guo Reported-by: Paul Guo <ggang@tilera.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-07-23staging: android: logger: Correct write offset reset on errorKarlis Ogsts1-1/+3
In the situation that a writer fails to copy data from userspace it will reset the write offset to the value it had before it went to sleep. This discarding any messages written while aquiring the mutex. Therefore the reset offset needs to be retrieved after acquiring the mutex. Cc: Android Kernel Team <kernel-team@android.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23staging: zram: protect zram_reset_device() callSergey Senozhatsky1-1/+5
Commit 9b3bb7abcdf2df0f1b2657e6cbc9d06bc2b3b36f (remove zram_sysfs file (v2)) accidentally made zram_reset_device() racy. Protect zram_reset_device() call with zram->lock. Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: Jerome Marchand <jmarchand@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23staging: gdm72xx: potential use after free in send_qos_list()Dan Carpenter1-1/+1
Sometimes free_qos_entry() sometimes frees its argument. I have moved the dereference of "entry" ahead on line to avoid a use after free. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23staging: drm/imx: drop "select OF_VIDEOMODE"Paul Bolle1-1/+0
Commit ac4c1a9b33 ("staging: drm/imx: Add LDB support") added the DRM_IMX_LDB Kconfig entry. That entry selects OF_VIDEOMODE. But there is no Kconfig symbol named OF_VIDEOMODE. The select statement for that symbol is a nop. Drop it. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23staging: frontier: use after free in disconnect()Dan Carpenter1-1/+1
usb_alphatrack_delete() frees "dev" so we can't use it on that path. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds4-44/+26
Pull vhost fixes from Michael Tsirkin: "vhost: more fixes for 3.11 This includes some fixes for vhost net and scsi drivers. The test module has already been reworked to avoid rcu usage, but the necessary core changes are missing, we fixed this. Unlikely to affect any real-world users, but it's early in the cycle so, let's merge them" (It was earlier when Michael originally sent the email, but it somehot got missed in the flood, so here it is after -rc2) * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost: Remove custom vhost rcu usage vhost-scsi: Always access vq->private_data under vq mutex vhost-net: Always access vq->private_data under vq mutex
2013-07-23staging: comedi: fix a race between do_cmd_ioctl() and read/writeIan Abbott1-10/+15
`do_cmd_ioctl()` is called with the comedi device's mutex locked to process the `COMEDI_CMD` ioctl to set up comedi's asynchronous command handling on a comedi subdevice. `comedi_read()` and `comedi_write()` are the `read` and `write` handlers for the comedi device, but do not lock the mutex (for performance reasons, as some things can hold the mutex for quite a long time). There is a race condition if `comedi_read()` or `comedi_write()` is running at the same time and for the same file object and comedi subdevice as `do_cmd_ioctl()`. `do_cmd_ioctl()` sets the subdevice's `busy` pointer to the file object way before it sets the `SRF_RUNNING` flag in the subdevice's `runflags` member. `comedi_read() and `comedi_write()` check the subdevice's `busy` pointer is pointing to the current file object, then if the `SRF_RUNNING` flag is not set, will call `do_become_nonbusy()` to shut down the asyncronous command. Bad things can happen if the asynchronous command is being shutdown and set up at the same time. To prevent the race, don't set the `busy` pointer until after the `SRF_RUNNING` flag has been set. Also, make sure the mutex is held in `comedi_read()` and `comedi_write()` while calling `do_become_nonbusy()` in order to avoid moving the race condition to a point within that function. Change some error handling `goto cleanup` statements in `do_cmd_ioctl()` to simple `return -ERRFOO` statements as a result of changing when the `busy` pointer is set. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23staging: comedi: COMEDI_CANCEL ioctl should wake up read/writeIan Abbott1-1/+6
Comedi devices can do blocking read() or write() (or poll()) if an asynchronous command has been set up, blocking for data (for read()) or buffer space (for write()). Various events associated with the asynchronous command will wake up the blocked reader or writer (or poller). It is also possible to force the asynchronous command to terminate by issuing a `COMEDI_CANCEL` ioctl. That shuts down the asynchronous command, but does not currently wake up the blocked reader or writer (or poller). If the blocked task could be woken up, it would see that the command is no longer active and return. The caller of the `COMEDI_CANCEL` ioctl could attempt to wake up the blocked task by sending a signal, but that's a nasty workaround. Change `do_cancel_ioctl()` to wake up the wait queue after it returns from `do_cancel()`. `do_cancel()` can propagate an error return value from the low-level comedi driver's cancel routine, but it always shuts the command down regardless, so `do_cancel_ioctl()` can wake up he wait queue regardless of the return value from `do_cancel()`. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23ARM: pxa: propagate errors from regulator_enable() to pxamciArnd Bergmann1-1/+1
The em_x270_mci_setpower() and em_x270_usb_hub_init() functions call regulator_enable(), which may return an error that must be checked. This changes the em_x270_usb_hub_init() function to bail out if it fails, and changes the pxamci_platform_data->setpower callback so that the a failed em_x270_mci_setpower call can be propagated by the pxamci driver into the mmc core. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Mike Rapoport <mike@compulab.co.il> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Acked-by: Chris Ball <cjb@laptop.org> [olof: fixed order of regulator_enable() and test in em_x270_usb_hub_init] Signed-off-by: Olof Johansson <olof@lixom.net>
2013-07-23Merge remote-tracking branch 'asoc/fix/atmel' into asoc-linusMark Brown1-3/+8
2013-07-23USB: option: add D-Link DWM-152/C1 and DWM-156/C1Alexandr \"Sky\" Ivanov1-0/+2
Adding support for D-Link DWM-152/C1 and DWM-156/C1 devices. DWM-152/C1: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=07d1 ProdID=3e01 Rev= 0.00 S: Product=USB Configuration S: SerialNumber=1234567890ABCDEF C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms DWM-156/C1: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=07d1 ProdID=3e02 Rev= 0.00 S: Product=DataCard Device S: SerialNumber=1234567890ABCDEF C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Alexandr Ivanov <alexandr.sky@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-23[SCSI] sd: fix crash when UA received on DIF enabled deviceEwan D. Milne1-15/+7
sd_prep_fn will allocate a larger CDB for the command via mempool_alloc for devices using DIF type 2 protection. This CDB was being freed in sd_done, which results in a kernel crash if the command is retried due to a UNIT ATTENTION. This change moves the code to free the larger CDB into sd_unprep_fn instead, which is invoked after the request is complete. It is no longer necessary to call scsi_print_command separately for this case as the ->cmnd will no longer be NULL in the normal code path. Also removed conditional test for DIF type 2 when freeing the larger CDB because the protection_type could have been changed via sysfs while the command was executing. Signed-off-by: Ewan D. Milne <emilne@redhat.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-07-23ahci: fix Null pointer dereference in achi_host_active()Xiaotian Feng1-1/+8
commit b29900e6 (AHCI: Make distinct names for ports in /proc/interrupts) introuded a regression, which resulted Null pointer dereference for achi host with dummy ports. For ahci ports, when the port is dummy port, its private_data will be NULL, as ata_dummy_port_ops doesn't support ->port_start. changes in v2: use pp to check dummy ports, update comments Reported-and-tested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Xiaotian Feng <xtfeng@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Alexander Gordeev <agordeev@redhat.com> Cc: linux-ide@vger.kernel.org Cc: linux-kernel@vger.kernel.org
2013-07-23[SCSI] qla2xxx: Properly set the tagging for commands.Saurav Kashyap1-2/+9
This fixes a regression where Xyratex controllers and disks were lost by the driver: https://bugzilla.kernel.org/show_bug.cgi?id=59601 Reported-by: Jack Hill <jackhill@jackhill.us> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Cc: <stable@vger.kernel.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-07-23[SCSI] isci: Fix a race condition in the SSP task management pathJeff Skirvin1-3/+6
This commit fixes a race condition in the isci driver abort task and SSP device task management path. The race is caused when an I/O termination in the SCU hardware is necessary because of an SSP target timeout condition, and the check of the I/O end state races against the HW-termination-driven end state. The failure of the race meant that no TMF was sent to the device to clean-up the pending I/O. Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Reviewed-by: Lukasz Dorau <lukasz.dorau@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-07-23drm/i915: fix hdmi portclock limitsDaniel Vetter1-3/+16
In commit 325b9d048810f7689ec644595061c0b700e64bce Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Apr 19 11:24:33 2013 +0200 drm/i915: fixup 12bpc hdmi dotclock handling I've errornously claimed that we don't yet support the hdmi 1.4 dotclocks > 225 MHz on Haswell. But a bug report and a closer look at the wrpll table showed that we've supported port clocks up to 300MHz. With the new code to dynamically compute wrpll limits we should have no issues going up to the full 340 MHz range of hdmi 1.4, so let's just use that to fix this regression. That'll allow 4k over hdmi for free! v2: Drop the random hunk that somehow slipped in. v3: Cantiga has the original HDMI dotclock limit of 165MHz. And also patch up the mode filtering. To do so extract the dotclock limits into a little helper function. v4: Use 300MHz (from Bspec) instead of 340MHz (upper limit for hdmi 1.3), apparently hw is not required to be able to drive the highest dotclocks. Suggested by Damien. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67048 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67030 Tested-by: Andreas Reis <andreas.reis@gmail.com> (v2) Cc: Damien Lespiau <damien.lespiau@intel.com> Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-07-23cpufreq / intel_pstate: Change to scale off of max P-stateDirk Brandewie1-6/+6
Change to using max P-state instead of max turbo P-state. This change resolves two issues. On a quiet system intel_pstate can fail to respond to a load change. On CPU SKUs that have a limited number of P-states and no turbo range intel_pstate fails to select the highest available P-state. This change is suitable for stable v3.9+ References: https://bugzilla.kernel.org/show_bug.cgi?id=59481 Reported-and-tested-by: Arjan van de Ven <arjan@linux.intel.com> Reported-and-tested-by: dsmythies@telus.net Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: 3.9+ <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-22Merge branch 'next' of ↵Linus Torvalds1-6/+12
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management fixes from Zhang Rui: "These are fixes collected over the last week, they fixes several problems caused by the x86_pkg_temp_thermal introduced in 3.11-rc1. Specifics: - the x86_pkg_temp_thermal driver causes crash on systems with no package MSR support as there is a bug in the logic to check presence of DTHERM and PTS feature together. Added a change so that when there is no PTS support, module doesn't get loaded. - fix krealloc() misuse in pkg_temp_thermal_device_add(). If krealloc() returns NULL, it doesn't free the original. Thus if we want to exit because of the krealloc() failure, we must make sure the original one is freed. - The error code path of the x86 package temperature thermal driver's initialization routine makes an unbalanced call to get_online_cpus(), which causes subsequent CPU offline operations, and consequently system suspend, to permanently block in cpu_hotplug_begin() on systems where get_core_online() returns an error code. Remove the extra get_online_cpus() to fix the problem" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: Thermal: Fix lockup of cpu_down() Thermal: x86_pkg_temp: Limit number of pkg temp zones Thermal: x86_pkg_temp: fix krealloc() misuse in in pkg_temp_thermal_device_add() Thermal: x86 package temp thermal crash
2013-07-22Merge tag 'gpio-for-v3.11-2' of ↵Linus Torvalds2-15/+71
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull gpio fixes from Linus Walleij: "A first round of GPIO fixes for the v3.11 series: - OMAP device tree boot fix - Handle an error condition in the MSM driver The OMAP patches have been around since around the merge window, but since they first caused more breakage I let them boil in -next for a while. These should be fine now" * tag 'gpio-for-v3.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: drivers: gpio: msm: Fix the error condition for reading ngpio gpio/omap: fix build error when OF_GPIO is not defined. gpio/omap: auto request GPIO as input if used as IRQ via DT gpio/omap: don't create an IRQ mapping for every GPIO on DT
2013-07-22Merge branch 'for-3.11/drivers' of git://git.kernel.dk/linux-blockLinus Torvalds37-1425/+2784
Pull block IO driver bits from Jens Axboe: "As I mentioned in the core block pull request, due to real life circumstances the driver pull request would be late. Now it looks like -rc2 late... On the plus side, apart form the rsxx update, these are all things that I could argue could go in later in the cycle as they are fixes and not features. So even though things are late, it's not ALL bad. The pull request contains: - Updates to bcache, all bug fixes, from Kent. - A pile of drbd bug fixes (no big features this time!). - xen blk front/back fixes. - rsxx driver updates, some of them deferred form 3.10. So should be well cooked by now" * 'for-3.11/drivers' of git://git.kernel.dk/linux-block: (63 commits) bcache: Allocation kthread fixes bcache: Fix GC_SECTORS_USED() calculation bcache: Journal replay fix bcache: Shutdown fix bcache: Fix a sysfs splat on shutdown bcache: Advertise that flushes are supported bcache: check for allocation failures bcache: Fix a dumb race bcache: Use standard utility code bcache: Update email address bcache: Delete fuzz tester bcache: Document shrinker reserve better bcache: FUA fixes drbd: Allow online change of al-stripes and al-stripe-size drbd: Constants should be UPPERCASE drbd: Ignore the exit code of a fence-peer handler if it returns too late drbd: Fix rcu_read_lock balance on error path drbd: fix error return code in drbd_init() drbd: Do not sleep inside rcu bcache: Refresh usage docs ...
2013-07-22libata: make it clear that sata_inic162x is experimentalTejun Heo2-1/+15
sata_inic162x never reached a state where it's reliable enough for production use and data corruption is a relatively common occurrence. Make the driver generate warning about the issues and mark the Kconfig option as experimental. If the situation doesn't improve, we'd be better off making it depend on CONFIG_BROKEN. Let's wait for several cycles and see if the kernel message draws any attention. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Martin Braure de Calignon <braurede@free.fr> Reported-by: Ben Hutchings <ben@decadent.org.uk> Reported-by: risc4all@yahoo.com
2013-07-22pinctrl: pinctrl-single: fix compile warning when no CONFIG_PMJean-Francois Moine1-0/+2
This warning has been introduced by the commit 0f9bc4bcdf4f pinctrl: single: adopt pinctrl sleep mode management Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-07-22libata: replace strict_strtol() with kstrtol()Jingoo Han1-2/+4
The usage of strict_strtol() is not preferred, because strict_strtol() is obsolete. Thus, kstrtol() should be used. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-07-22drm/radeon: fix combios tables on older cardsMark Kettenis1-104/+41
Noticed that my old Radeon 7500 hung after printing drm: GPU not posted. posting now... when it wasn't selected as the primary card the BIOS. Some digging revealed that it was hanging in combios_parse_mmio_table() while parsing the ASIC INIT 3 table. Looking at the BIOS ROM for the card, it becomes obvious that there is no ASIC INIT 3 table in the BIOS. The code is just processing random garbage. No surprise it hangs! Why do I say that there is no ASIC INIT 3 table is the BIOS? This table is found through the MISC INFO table. The MISC INFO table can be found at offset 0x5e in the COMBIOS header. But the header is smaller than that. The COMBIOS header starts at offset 0x126. The standard PCI Data Structure (the bit that starts with 'PCIR') lives at offset 0x180. That means that the COMBIOS header can not be larger than 0x5a bytes and therefore cannot contain a MISC INFO table. I looked at a dozen or so BIOS images, some my own, some downloaded from: <http://www.techpowerup.com/vgabios/index.php?manufacturer=ATI&page=1> It is fairly obvious that the size of the COMBIOS header can be found at offset 0x6 of the header. Not sure if it is a 16-bit number or just an 8-bit number, but that doesn't really matter since the tables seems to be always smaller than 256 bytes. So I think combios_get_table_offset() should check if the requested table is present. This can be done by checking the offset against the size of the header. See the diff below. The diff is against the WIP OpenBSD codebase that roughly corresponds to Linux 3.8.13 at this point. But I don't think this bit of the code changed much since then. For what it is worth: Signed-off-by: Mark Kettenis <kettenis@openbsd.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-07-22drm/radeon: improve dac adjust heuristics for legacy pdacAlex Deucher1-2/+4
Hopefully avoid more quirks in the future due to bogus vbios dac data. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-07-22drm/radeon: Another card with wrong primary dac adjOndrej Zary1-2/+6
Hello, got another card with "too bright" problem: Sapphire Radeon VE 7000 DDR (VGA+S-Video) lspci -vnn: 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI RV100 QY [Radeon 7000/VE] [1002:5159] (prog-if 00 [VGA controller]) Subsystem: PC Partner Limited Sapphire Radeon VE 7000 DDR [174b:7c28] The patch below fixes the problem for this card. But I don't like the blacklist, couldn't some heuristic be used instead? The interesting thing is that the manufacturer is the same as the other card needing the same quirk. I wonder how many different types are broken this way. The "wrong" ps2_pdac_adj value that comes from BIOS on this card is 0x300. ==================== drm/radeon: Add primary dac adj quirk for Sapphire Radeon VE 7000 DDR Values from BIOS are wrong, causing too bright colors. Use default values instead. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-07-22drm/radeon: fix endian issues with DP handling (v3)Alex Deucher1-4/+39
The atom interpreter expects data in LE format, so swap the message buffer as apprioriate. v2: properly handle non-dw aligned byte counts. v3: properly handle remainder Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Dong He <hedonghust@gmail.com> Cc: stable@vger.kernel.org
2013-07-22drm/radeon/vm: only align the pt base to 32kAlex Deucher1-4/+4
fixes: https://bugs.freedesktop.org/show_bug.cgi?id=67016 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2013-07-22drm/radeon: wait for 3D idle before using CP DMAAlex Deucher1-1/+4
Make sure the 3D engine is idle before using CP DMA for bo copies. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Marek Olšák <maraeo@gmail.com>
2013-07-22pinctrl: sh-pfc: fix SDHI0 VccQ regulator on sh73a0 with DTGuennadi Liakhovetski1-0/+1
The PFC pinctrl driver on sh73a0 is also regiatering a VccQ regulator for SDHI0. However, its consumers list only included the platform-data based SDHI device name. When booted with DT SDHI0 couldn't enable VccQ and therefore was unusable. Fix this by adding a consumer with DT-based name. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>