summaryrefslogtreecommitdiff
path: root/arch/x86/pci
AgeCommit message (Collapse)AuthorFilesLines
2013-10-04Revert "x86/PCI: MMCONFIG: Check earlier for MMCONFIG region at address zero"Bjorn Helgaas1-1/+6
This reverts commit 07f9b61c3915e8eb156cb4461b3946736356ad02. 07f9b61c was intended to be a cleanup that didn't change anything, but in fact, for systems without _CBA (which is almost everything), it broke extended config space for domain 0 and all config space for other domains. Reference: http://lkml.kernel.org/r/20131004011806.GE20450@dangermouse.emea.sgi.com Reported-by: Hedi Berriche <hedi@sgi.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-09-03Merge tag 'pci-v3.12-changes' of ↵Linus Torvalds3-30/+27
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: PCI device hotplug: - Use PCIe native hotplug, not ACPI hotplug, when possible (Neil Horman) - Assign resources on per-host bridge basis (Yinghai Lu) MPS (Max Payload Size): - Allow larger MPS settings below hotplug-capable Root Port (Yijing Wang) - Add warnings about unsafe MPS settings (Yijing Wang) - Simplify interface and messages (Bjorn Helgaas) SR-IOV: - Return -ENOSYS on non-SR-IOV devices (Stefan Assmann) - Update NumVFs register when disabling SR-IOV (Yijing Wang) Virtualization: - Add bus and slot reset support (Alex Williamson) - Fix ACS (Access Control Services) issues (Alex Williamson) Miscellaneous: - Simplify PCIe Capability accessors (Bjorn Helgaas) - Add pcibios_pm_ops for arch-specific hibernate stuff (Sebastian Ott) - Disable decoding during BAR sizing only when necessary (Zoltan Kiss) - Delay enabling bridges until they're needed (Yinghai Lu) - Split Designware support into Synopsys and Exynos parts (Jingoo Han) - Convert class code to use dev_groups (Greg Kroah-Hartman) - Cleanup Designware and Exynos I/O access wrappers (Seungwon Jeon) - Fix bridge I/O window alignment (Bjorn Helgaas) - Add pci_wait_for_pending_transaction() (Casey Leedom) - Use devm_ioremap_resource() in Marvell driver (Tushar Behera) * tag 'pci-v3.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (63 commits) PCI/ACPI: Fix _OSC ordering to allow PCIe hotplug use when available PCI: exynos: Add I/O access wrappers PCI: designware: Drop "addr" arg from dw_pcie_readl_rc()/dw_pcie_writel_rc() PCI: Remove pcie_cap_has_devctl() PCI: Support PCIe Capability Slot registers only for ports with slots PCI: Remove PCIe Capability version checks PCI: Allow PCIe Capability link-related register access for switches PCI: Add offsets of PCIe capability registers PCI: Tidy bitmasks and spacing of PCIe capability definitions PCI: Remove obsolete comment reference to pci_pcie_cap2() PCI: Clarify PCI_EXP_TYPE_PCI_BRIDGE comment PCI: Rename PCIe capability definitions to follow convention PCI: Warn if unsafe MPS settings detected PCI: Fix MPS peer-to-peer DMA comment syntax PCI: Disable decoding for BAR sizing only when it was actually enabled PCI: Add comment about needing pci_msi_off() even when CONFIG_PCI_MSI=n PCI: Add pcibios_pm_ops for optional arch-specific hibernate functionality PCI: Don't restrict MPS for slots below Root Ports PCI: Simplify MPS test for Downstream Port PCI: Remove unnecessary check for pcie_get_mps() failure ...
2013-08-26Merge branch 'pci/yijing-mps-v8' into nextBjorn Helgaas1-7/+2
* pci/yijing-mps-v8: PCI: Warn if unsafe MPS settings detected PCI: Fix MPS peer-to-peer DMA comment syntax PCI: Don't restrict MPS for slots below Root Ports PCI: Simplify MPS test for Downstream Port PCI: Remove unnecessary check for pcie_get_mps() failure PCI: Simplify pcie_bus_configure_settings() interface PCI: Drop "PCI-E" prefix from Max Payload Size message
2013-08-22PCI: Simplify pcie_bus_configure_settings() interfaceBjorn Helgaas1-7/+2
Based on a patch by Jon Mason (see URL below). All users of pcie_bus_configure_settings() pass arguments of the form "bus, bus->self->pcie_mpss". The "mpss" argument is redundant since we can easily look it up internally. In addition, all callers check "bus->self" for NULL, which we can also do internally. This patch simplifies the interface and the callers. No functional change. Reference: http://lkml.kernel.org/r/1317048850-30728-2-git-send-email-mason@myri.com Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-07-26x86/PCI: MMCONFIG: Check earlier for MMCONFIG region at address zeroethan.zhao1-6/+1
We can check for addr being zero earlier and thus avoid the mutex_unlock() cleanup path. [bhelgaas: drop warning printk] Signed-off-by: ethan.zhao <ethan.zhao@oracle.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org>
2013-07-25x86/pci/mrst: Cleanup checkpatch.pl warningsValentina Manea1-17/+24
This patch fixes warning and errors found by checkpatch.pl: * replace asm/acpi.h, asm/io.h and asm/smp.h with linux/acpi.h, linux/io.h and linux/smp.h respectively * remove explicit initialization to 0 of a static global variable * replace printk(KERN_INFO ...) with pr_info * use tabs instead of spaces for indentation * arrange comments so that they adhere to Documentation/CodingStyle [bhelgaas: capitalize "PCI", "Langwell", "Lincroft" consistently] Signed-off-by: Valentina Manea <valentina.manea.m@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Ingo Molnar <mingo@kernel.org>
2013-07-23x86 / PCI: prevent re-allocation of already existing bridge and ROM resourcesMika Westerberg1-0/+4
In hotplug case (especially with Thunderbolt enabled systems) we might need to call pcibios_resource_survey_bus() several times for a bus. The function ends up calling pci_claim_resource() for each bridge resource that then fails claiming that the resource exists already (which it does). Once this happens the resource is invalidated thus preventing devices behind the bridge to allocate their resources. To fix this we do what has been done in pcibios_allocate_dev_resources() and check 'parent' of the given resource. If it is non-NULL it means that the resource has been allocated already and we can skip it. We do the same for ROM resources as well. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-14x86: delete __cpuinit usage from all x86 filesPaul Gortmaker1-4/+4
The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) are flagged as __cpuinit -- so if we remove the __cpuinit from arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. This removes all the arch/x86 uses of the __cpuinit macros from all C files. x86 only had the one __CPUINIT used in assembly files, and it wasn't paired off with a .previous or a __FINIT, so we can delete it directly w/o any corresponding additional change there. [1] https://lkml.org/lkml/2013/5/20/589 Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-07-03Merge tag 'pci-v3.11-changes' of ↵Linus Torvalds1-5/+2
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: "PCI device hotplug - Add pci_alloc_dev() interface (Gu Zheng) - Add pci_bus_get()/put() for reference counting (Jiang Liu) - Fix SR-IOV reference count issues (Jiang Liu) - Remove unused acpi_pci_roots list (Jiang Liu) MSI - Conserve interrupt resources on x86 (Alexander Gordeev) AER - Force fatal severity when component has been reset (Betty Dall) - Reset link below Root Port as well as Downstream Port (Betty Dall) - Fix "Firmware first" flag setting (Bjorn Helgaas) - Don't parse HEST for non-PCIe devices (Bjorn Helgaas) ASPM - Warn when we can't disable ASPM as driver requests (Bjorn Helgaas) Miscellaneous - Add CircuitCo PCI IDs (Darren Hart) - Add AMD CZ SATA and SMBus PCI IDs (Shane Huang) - Work around Ivytown NTB BAR size issue (Jon Mason) - Detect invalid initial BAR values (Kevin Hao) - Add pcibios_release_device() (Sebastian Ott) - Fix powerpc & sparc PCI_UNKNOWN power state usage (Bjorn Helgaas)" * tag 'pci-v3.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (51 commits) MAINTAINERS: Add ACPI folks for ACPI-related things under drivers/pci PCI: Add CircuitCo vendor ID and subsystem ID PCI: Use pdev->pm_cap instead of pci_find_capability(..,PCI_CAP_ID_PM) PCI: Return early on allocation failures to unindent mainline code PCI: Simplify IOV implementation and fix reference count races PCI: Drop redundant setting of bus->is_added in virtfn_add_bus() unicore32/PCI: Remove redundant call of pci_bus_add_devices() m68k/PCI: Remove redundant call of pci_bus_add_devices() PCI / ACPI / PM: Use correct power state strings in messages PCI: Fix comment typo for pcie_pme_remove() PCI: Rename pci_release_bus_bridge_dev() to pci_release_host_bridge_dev() PCI: Fix refcount issue in pci_create_root_bus() error recovery path ia64/PCI: Clean up pci_scan_root_bus() usage PCI/AER: Reset link for devices below Root Port or Downstream Port ACPI / APEI: Force fatal AER severity when component has been reset PCI/AER: Remove "extern" from function declarations PCI/AER: Move AER severity defines to aer.h PCI/AER: Set dev->__aer_firmware_first only for matching devices PCI/AER: Factor out HEST device type matching PCI/AER: Don't parse HEST table for non-PCIe devices ...
2013-06-05x86/PCI: Map PCI setup data with ioremap() so it can be in highmemMatt Fleming1-1/+4
f9a37be0f0 ("x86: Use PCI setup data") added support for using PCI ROM images from setup_data. This used phys_to_virt(), which is not valid for highmem addresses, and can cause a crash when booting a 32-bit kernel via the EFI boot stub. pcibios_add_device() assumes that the physical addresses stored in setup_data are accessible via the direct kernel mapping, and that calling phys_to_virt() is valid. This isn't guaranteed to be true on x86 where the direct mapping range is much smaller than on x86-64. Calling phys_to_virt() on a highmem address results in the following: BUG: unable to handle kernel paging request at 39a3c198 IP: [<c262be0f>] pcibios_add_device+0x2f/0x90 ... Call Trace: [<c2370c73>] pci_device_add+0xe3/0x130 [<c274640b>] pci_scan_single_device+0x8b/0xb0 [<c2370d08>] pci_scan_slot+0x48/0x100 [<c2371904>] pci_scan_child_bus+0x24/0xc0 [<c262a7b0>] pci_acpi_scan_root+0x2c0/0x490 [<c23b7203>] acpi_pci_root_add+0x312/0x42f ... The solution is to use ioremap() instead of phys_to_virt() to map the setup data into the kernel address space. [bhelgaas: changelog] Tested-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Seth Forshee <seth.forshee@canonical.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: stable@vger.kernel.org # v3.8+
2013-05-28x86/PCI: Increase info->res_num before checking pci_use_crsYijing Wang1-5/+2
We should increase info->res_num before we checking pci_use_crs return when pci=nocrs set. No functional change, since we don't use res_num and res_offset[] in the "!pci_use_crs" case anyway, but this makes the code read better. Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Jiang Liu <liuj97@gmail.com> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Feng Tang <feng.tang@intel.com>
2013-05-20Revert "x86/pci/mrst: Use configuration mechanism 1 for 00:00.0, 00:02.0, ↵Bjorn Helgaas1-6/+4
00:03.0" This reverts commit dd72be99d11dbf738d910a38479ce414a51eb21e. Andy Shevchenko <andy.shevchenko@gmail.com> reported that this commit broke Intel Medfield devices. Reference: https://lkml.kernel.org/r/CAHp75Vdf6gFZChS47=grUygHBDWcoOWDYPzw+Zj5bdVCWj85Jw@mail.gmail.com Reported-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-05-11Merge tag 'stable/for-linus-3.10-rc0-tag-two' of ↵Linus Torvalds1-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen bug-fixes from Konrad Rzeszutek Wilk: - More fixes in the vCPU PVHVM hotplug path. - Add more documentation. - Fix various ARM related issues in the Xen generic drivers. - Updates in the xen-pciback driver per Bjorn's updates. - Mask the x2APIC feature for PV guests. * tag 'stable/for-linus-3.10-rc0-tag-two' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/pci: Used cached MSI-X capability offset xen/pci: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASK xen: clear IRQ_NOAUTOEN and IRQ_NOREQUEST xen: mask x2APIC feature in PV xen: SWIOTLB is only used on x86 xen/spinlock: Fix check from greater than to be also be greater or equal to. xen/smp/pvhvm: Don't point per_cpu(xen_vpcu, 33 and larger) to shared_info xen/vcpu: Document the xen_vcpu_info and xen_vcpu xen/vcpu/pvhvm: Fix vcpu hotplugging hanging.
2013-05-10xen/pci: Used cached MSI-X capability offsetBjorn Helgaas1-2/+1
We now cache the MSI-X capability offset in the struct pci_dev, so no need to find the capability again. Acked-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-05-10xen/pci: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASKBjorn Helgaas1-1/+1
PCI_MSIX_FLAGS_BIRMASK is mis-named because the BIR mask is in the Table Offset register, not the flags ("Message Control" per spec) register. Acked-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-04-30x86/pci/mrst: Use configuration mechanism 1 for 00:00.0, 00:02.0, 00:03.0Bin Gao1-4/+6
For real PCI devices 00:00.0, 00:02.0 and 00:03.0, there is either no PCI shim, or no guarantee of data correctness of offset 256-4k. So for whatever reason, Linux kernel should not do MMCFG PCI config access to those devices. Instead, always use configuration mechanism 1 for those devices. The 00:00.0, 00:02.0 and 00:03.0 devices are built-in single-function devices and are not PCI-PCI bridges, so this set of devices should be complete. Signed-off-by: Bin Gao <bin.gao@linux.intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-04-29Merge tag 'pci-v3.10-changes' of ↵Linus Torvalds1-0/+11
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "PCI changes for the v3.10 merge window: PCI device hotplug - Remove ACPI PCI subdrivers (Jiang Liu, Myron Stowe) - Make acpiphp builtin only, not modular (Jiang Liu) - Add acpiphp mutual exclusion (Jiang Liu) Power management - Skip "PME enabled/disabled" messages when not supported (Rafael Wysocki) - Fix fallback to PCI_D0 (Rafael Wysocki) Miscellaneous - Factor quirk_io_region (Yinghai Lu) - Cache MSI capability offsets & cleanup (Gavin Shan, Bjorn Helgaas) - Clean up EISA resource initialization and logging (Bjorn Helgaas) - Fix prototype warnings (Andy Shevchenko, Bjorn Helgaas) - MIPS: Initialize of_node before scanning bus (Gabor Juhos) - Fix pcibios_get_phb_of_node() declaration "weak" annotation (Gabor Juhos) - Add MSI INTX_DISABLE quirks for AR8161/AR8162/etc (Xiong Huang) - Fix aer_inject return values (Prarit Bhargava) - Remove PME/ACPI dependency (Andrew Murray) - Use shared PCI_BUS_NUM() and PCI_DEVID() (Shuah Khan)" * tag 'pci-v3.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (63 commits) vfio-pci: Use cached MSI/MSI-X capabilities vfio-pci: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASK PCI: Remove "extern" from function declarations PCI: Use PCI_MSIX_TABLE_BIR, not PCI_MSIX_FLAGS_BIRMASK PCI: Drop msi_mask_reg() and remove drivers/pci/msi.h PCI: Use msix_table_size() directly, drop multi_msix_capable() PCI: Drop msix_table_offset_reg() and msix_pba_offset_reg() macros PCI: Drop is_64bit_address() and is_mask_bit_support() macros PCI: Drop msi_data_reg() macro PCI: Drop msi_lower_address_reg() and msi_upper_address_reg() macros PCI: Drop msi_control_reg() macro and use PCI_MSI_FLAGS directly PCI: Use cached MSI/MSI-X offsets from dev, not from msi_desc PCI: Clean up MSI/MSI-X capability #defines PCI: Use cached MSI-X cap while enabling MSI-X PCI: Use cached MSI cap while enabling MSI interrupts PCI: Remove MSI/MSI-X cap check in pci_msi_check_device() PCI: Cache MSI/MSI-X capability offsets in struct pci_dev PCI: Use u8, not int, for PM capability offset [SCSI] megaraid_sas: Use correct #define for MSI-X capability PCI: Remove "extern" from function declarations ...
2013-04-16xen: drop tracking of IRQ vectorJan Beulich1-3/+3
For quite a few Xen versions, this wasn't the IRQ vector anymore anyway, and it is not being used by the kernel for anything. Hence drop the field from struct irq_info, and respective function parameters. Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-04-12x86/PCI: Implement pcibios_{add|remove}_bus() hooksJiang Liu1-0/+11
Implement pcibios_{add|remove}_bus() hooks for x86 platforms. Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Signed-off-by: Yijing Wang <wangyijing@huawei.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Yinghai Lu <yinghai@kernel.org> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Myron Stowe <myron.stowe@redhat.com>
2013-03-03Merge tag 'stable/for-linus-3.9-rc1-tag' of ↵Linus Torvalds1-0/+9
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull Xen bug-fixes from Konrad Rzeszutek Wilk: - Update the Xen ACPI memory and CPU hotplug locking mechanism. - Fix PAT issues wherein various applications would not start - Fix handling of multiple MSI as AHCI now does it. - Fix ARM compile failures. * tag 'stable/for-linus-3.9-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xenbus: fix compile failure on ARM with Xen enabled xen/pci: We don't do multiple MSI's. xen/pat: Disable PAT using pat_enabled value. xen/acpi: xen cpu hotplug minor updates xen/acpi: xen memory hotplug minor updates
2013-03-01xen/pci: We don't do multiple MSI's.Konrad Rzeszutek Wilk1-0/+9
There is no hypercall to setup multiple MSI per PCI device. As such with these two new commits: - 08261d87f7d1b6253ab3223756625a5c74532293 PCI/MSI: Enable multiple MSIs with pci_enable_msi_block_auto() - 5ca72c4f7c412c2002363218901eba5516c476b1 AHCI: Support multiple MSIs we would call the PHYSDEVOP_map_pirq 'nvec' times with the same contents of the PCI device. Sander discovered that we would get the same PIRQ value 'nvec' times and return said values to the caller. That of course meant that the device was configured only with one MSI and AHCI would fail with: ahci 0000:00:11.0: version 3.0 xen: registering gsi 19 triggering 0 polarity 1 xen: --> pirq=19 -> irq=19 (gsi=19) (XEN) [2013-02-27 19:43:07] IOAPIC[0]: Set PCI routing entry (6-19 -> 0x99 -> IRQ 19 Mode:1 Active:1) ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ahci: probe of 0000:00:11.0 failed with error -22 That is b/c in ahci_host_activate the second call to devm_request_threaded_irq would return -EINVAL as we passed in (on the second run) an IRQ that was never initialized. CC: stable@vger.kernel.org Reported-and-Tested-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-02-25Merge tag 'pci-v3.9-changes' of ↵Linus Torvalds5-67/+132
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: "Host bridge hotplug - Major overhaul of ACPI host bridge add/start (Rafael Wysocki, Yinghai Lu) - Major overhaul of PCI/ACPI binding (Rafael Wysocki, Yinghai Lu) - Split out ACPI host bridge and ACPI PCI device hotplug (Yinghai Lu) - Stop caching _PRT and make independent of bus numbers (Yinghai Lu) PCI device hotplug - Clean up cpqphp dead code (Sasha Levin) - Disable ARI unless device and upstream bridge support it (Yijing Wang) - Initialize all hot-added devices (not functions 0-7) (Yijing Wang) Power management - Don't touch ASPM if disabled (Joe Lawrence) - Fix ASPM link state management (Myron Stowe) Miscellaneous - Fix PCI_EXP_FLAGS accessor (Alex Williamson) - Disable Bus Master in pci_device_shutdown (Konstantin Khlebnikov) - Document hotplug resource and MPS parameters (Yijing Wang) - Add accessor for PCIe capabilities (Myron Stowe) - Drop pciehp suspend/resume messages (Paul Bolle) - Make pci_slot built-in only (not a module) (Jiang Liu) - Remove unused PCI/ACPI bind ops (Jiang Liu) - Removed used pci_root_bus (Bjorn Helgaas)" * tag 'pci-v3.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (51 commits) PCI/ACPI: Don't cache _PRT, and don't associate them with bus numbers PCI: Fix PCI Express Capability accessors for PCI_EXP_FLAGS ACPI / PCI: Make pci_slot built-in only, not a module PCI/PM: Clear state_saved during suspend PCI: Use atomic_inc_return() rather than atomic_add_return() PCI: Catch attempts to disable already-disabled devices PCI: Disable Bus Master unconditionally in pci_device_shutdown() PCI: acpiphp: Remove dead code for PCI host bridge hotplug PCI: acpiphp: Create companion ACPI devices before creating PCI devices PCI: Remove unused "rc" in virtfn_add_bus() PCI: pciehp: Drop suspend/resume ENTRY messages PCI/ASPM: Don't touch ASPM if forcibly disabled PCI/ASPM: Deallocate upstream link state even if device is not PCIe PCI: Document MPS parameters pci=pcie_bus_safe, pci=pcie_bus_perf, etc PCI: Document hpiosize= and hpmemsize= resource reservation parameters PCI: Use PCI Express Capability accessor PCI: Introduce accessor to retrieve PCIe Capabilities Register PCI: Put pci_dev in device tree as early as possible PCI: Skip attaching driver in device_add() PCI: acpiphp: Keep driver loaded even if no slots found ...
2013-02-11x86, uv, uv3: Update ACPI Check to include SGI UV3Mike Travis1-2/+1
Add UV3 to exclusion list. Instead of adding every new series of SGI UV systems, just check oem_id to have a prefix of "SGI". Signed-off-by: Mike Travis <travis@sgi.com> Link: http://lkml.kernel.org/r/20130211194508.457937455@gulag1.americas.sgi.com Acked-by: Russ Anderson <rja@sgi.com> Reviewed-by: Dimitri Sivanich <sivanich@sgi.com> Cc: Jiang Liu <liuj97@gmail.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-01-17Merge branch 'pci/rafael-set-root-bridge-handle' into nextBjorn Helgaas1-0/+9
* pci/rafael-set-root-bridge-handle: ACPI / PCI: Set root bridge ACPI handle in advance
2013-01-13ACPI / PCI: Set root bridge ACPI handle in advanceRafael J. Wysocki1-0/+9
The ACPI handles of PCI root bridges need to be known to acpi_bind_one(), so that it can create the appropriate "firmware_node" and "physical_node" files for them, but currently the way it gets to know those handles is not exactly straightforward (to put it lightly). This is how it works, roughly: 1. acpi_bus_scan() finds the handle of a PCI root bridge, creates a struct acpi_device object for it and passes that object to acpi_pci_root_add(). 2. acpi_pci_root_add() creates a struct acpi_pci_root object, populates its "device" field with its argument's address (device->handle is the ACPI handle found in step 1). 3. The struct acpi_pci_root object created in step 2 is passed to pci_acpi_scan_root() and used to get resources that are passed to pci_create_root_bus(). 4. pci_create_root_bus() creates a struct pci_host_bridge object and passes its "dev" member to device_register(). 5. platform_notify(), which for systems with ACPI is set to acpi_platform_notify(), is called. So far, so good. Now it starts to be "interesting". 6. acpi_find_bridge_device() is used to find the ACPI handle of the given device (which is the PCI root bridge) and executes acpi_pci_find_root_bridge(), among other things, for the given device object. 7. acpi_pci_find_root_bridge() uses the name (sic!) of the given device object to extract the segment and bus numbers of the PCI root bridge and passes them to acpi_get_pci_rootbridge_handle(). 8. acpi_get_pci_rootbridge_handle() browses the list of ACPI PCI root bridges and finds the one that matches the given segment and bus numbers. Its handle is then used to initialize the ACPI handle of the PCI root bridge's device object by acpi_bind_one(). However, this is *exactly* the ACPI handle we started with in step 1. Needless to say, this is quite embarassing, but it may be avoided thanks to commit f3fd0c8 (ACPI: Allow ACPI handles of devices to be initialized in advance), which makes it possible to initialize the ACPI handle of a device before passing it to device_register(). Accordingly, add a new __weak routine, pcibios_root_bridge_prepare(), defaulting to an empty implementation that can be replaced by the interested architecutres (x86 and ia64 at the moment) with functions that will set the root bridge's ACPI handle before its dev member is passed to device_register(). Make both x86 and ia64 provide such implementations of pcibios_root_bridge_prepare() and remove acpi_pci_find_root_bridge() and acpi_get_pci_rootbridge_handle() that aren't necessary any more. Included is a fix for breakage on systems with non-ACPI PCI host bridges from Bjorn Helgaas. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-01-09Merge branch 'pci/yinghai-survey-resources' into nextBjorn Helgaas1-64/+121
* pci/yinghai-survey-resources: x86/PCI: Implement pcibios_resource_survey_bus() PCI/ACPI: Reserve firmware-allocated resources for hot-added root buses x86/PCI: Keep resource allocation functions after boot x86/PCI: Don't track firmware-assigned BAR values for hot-added devices x86/PCI: Factor out pcibios_allocate_dev_rom_resource() x86/PCI: Allocate resources on a per-bus basis for hot-adding root buses x86/PCI: Factor out pcibios_allocate_dev_resources() x86/PCI: Factor out pcibios_allocate_bridge_resources()
2013-01-07x86/PCI: Implement pcibios_resource_survey_bus()Yinghai Lu1-0/+13
During testing remove/rescan root bus 00, found [ 338.142574] bus: 'pci': really_probe: probing driver ata_piix with device 0000:00:01.1 [ 338.146788] ata_piix 0000:00:01.1: device not available (can't reserve [io 0x01f0-0x01f7]) [ 338.150565] ata_piix: probe of 0000:00:01.1 failed with error -22 because that fixed resource is not claimed. For bootint path it is claimed in from arch/x86/pci/i386.c::pcibios_allocate_resources() Claim those resources, so on the remove/rescan will still use old resources. It is some kind honoring FW setting in the registers during hot add. esp root-bus hot add is through acpi, BIOS has chance to set some registers before handing over. [bhelgaas: move weak definition to patch that uses it] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-01-07x86/PCI: Keep resource allocation functions after bootYinghai Lu1-6/+6
The PCI resource allocation functions will be used for hot-added devices, so keep them around. [bhelgaas: changelog] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-01-07x86/PCI: Don't track firmware-assigned BAR values for hot-added devicesYinghai Lu1-1/+9
The BIOS doesn't assign BAR values for hot-added devices, so don't bother saving the original values when we enumerate these devices. [bhelgaas: changelog, return constant 0 in pcibios_retrieve_fw_addr] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-01-07x86/PCI: Factor out pcibios_allocate_dev_rom_resource()Yinghai Lu1-17/+35
Factor pcibios_allocate_rom_resources() and pcibios_allocate_dev_rom_resource() out of pcibios_assign_resources(). This will allow us to allocate ROM resources for hot-added root buses. [bhelgaas: changelog] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-01-07x86/PCI: Allocate resources on a per-bus basis for hot-adding root busesYinghai Lu1-13/+25
Previously pcibios_allocate_resources() allocated resources at boot-time for all PCI devices using for_each_pci_dev(). This patch changes pcibios_allocate_resources() so we can specify a bus, so we can do similar allocation when hot-adding a root bus. [bhelgaas: changelog] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-01-07x86/PCI: Factor out pcibios_allocate_dev_resources()Yinghai Lu1-19/+23
Factor pcibios_allocate_dev_resources() out of pcibios_allocate_resources(). Currently we only allocate these resources at boot-time with a for_each_pci_dev() loop. Eventually we'll use pcibios_allocate_dev_resources() for hot-added devices, too. [bhelgaas: changelog] Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-01-07x86/PCI: Factor out pcibios_allocate_bridge_resources()Yinghai Lu1-22/+24
Thus pcibios_allocate_bus_resources() could more simple and clean. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-01-03X86: drivers: remove __dev* attributes.Greg Kroah-Hartman11-59/+55
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Daniel Drake <dsd@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-03x86/PCI: Remove unused pci_root_busBjorn Helgaas3-3/+2
pci_root_bus is unused, so remove all references to it. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-12-26PCI: Work around Stratus ftServer broken PCIe hierarchy (fix DMI check)Myron Stowe1-1/+2
Commit 284f5f9 was intended to disable the "only_one_child()" optimization on Stratus ftServer systems, but its DMI check is wrong. It looks for DMI_SYS_VENDOR that contains "ftServer", when it should look for DMI_SYS_VENDOR containing "Stratus" and DMI_PRODUCT_NAME containing "ftServer". Tested on Stratus ftServer 6400. Reported-by: Fadeeva Marina <astarta@rat.ru> Reference: https://bugzilla.kernel.org/show_bug.cgi?id=51331 Signed-off-by: Myron Stowe <myron.stowe@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> CC: stable@vger.kernel.org # v3.5+
2012-12-13Merge tag 'for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds4-6/+202
Pull PCI update from Bjorn Helgaas: "Host bridge hotplug: - Untangle _PRT from struct pci_bus (Bjorn Helgaas) - Request _OSC control before scanning root bus (Taku Izumi) - Assign resources when adding host bridge (Yinghai Lu) - Remove root bus when removing host bridge (Yinghai Lu) - Remove _PRT during hot remove (Yinghai Lu) SRIOV - Add sysfs knobs to control numVFs (Don Dutile) Power management - Notify devices when power resource turned on (Huang Ying) Bug fixes - Work around broken _SEG on HP xw9300 (Bjorn Helgaas) - Keep runtime PM enabled for unbound PCI devices (Huang Ying) - Fix Optimus dual-GPU runtime D3 suspend issue (Dave Airlie) - Fix xen frontend shutdown issue (David Vrabel) - Work around PLX PCI 9050 BAR alignment erratum (Ian Abbott) Miscellaneous - Add GPL license for drivers/pci/ioapic (Andrew Cooks) - Add standard PCI-X, PCIe ASPM register #defines (Bjorn Helgaas) - NumaChip remote PCI support (Daniel Blueman) - Fix PCIe Link Capabilities Supported Link Speed definition (Jingoo Han) - Convert dev_printk() to dev_info(), etc (Joe Perches) - Add support for non PCI BAR ROM data (Matthew Garrett) - Add x86 support for host bridge translation offset (Mike Yoknis) - Report success only when every driver supports AER (Vijay Pandarathil)" Fix up trivial conflicts. * tag 'for-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (48 commits) PCI: Use phys_addr_t for physical ROM address x86/PCI: Add NumaChip remote PCI support ath9k: Use standard #defines for PCIe Capability ASPM fields iwlwifi: Use standard #defines for PCIe Capability ASPM fields iwlwifi: collapse wrapper for pcie_capability_read_word() iwlegacy: Use standard #defines for PCIe Capability ASPM fields iwlegacy: collapse wrapper for pcie_capability_read_word() cxgb3: Use standard #defines for PCIe Capability ASPM fields PCI: Add standard PCIe Capability Link ASPM field names PCI/portdrv: Use PCI Express Capability accessors PCI: Use standard PCIe Capability Link register field names x86: Use PCI setup data PCI: Add support for non-BAR ROMs PCI: Add pcibios_add_device EFI: Stash ROMs if they're not in the PCI BAR PCI: Add and use standard PCI-X Capability register names PCI/PM: Keep runtime PM enabled for unbound PCI devices xen-pcifront: Handle backend CLOSED without CLOSING PCI: SRIOV control and status via sysfs (documentation) PCI/AER: Report success only when every device has AER-aware driver ...
2012-12-10Merge branch 'pci/mjg-pci-roms-from-efi' into nextBjorn Helgaas1-2/+2
* pci/mjg-pci-roms-from-efi: PCI: Use phys_addr_t for physical ROM address
2012-12-10PCI: Use phys_addr_t for physical ROM addressBjorn Helgaas1-2/+2
Use phys_addr_t rather than "void *" for physical memory address. This removes casts and fixes a "cast from pointer to integer of different size" warning on ppc44x_defconfig. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-12-07Merge branch 'pci/daniel-numachip' into nextBjorn Helgaas2-0/+130
* pci/daniel-numachip: x86/PCI: Add NumaChip remote PCI support
2012-12-07x86/PCI: Add NumaChip remote PCI supportDaniel J Blueman2-0/+130
Add NumaChip-specific PCI access mechanism via MMCONFIG cycles, but preventing access to AMD Northbridges which shouldn't respond. Signed-off-by: Daniel J Blueman <daniel@numascale-asia.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-12-06Merge branch 'pci/mjg-pci-roms-from-efi' into nextBjorn Helgaas1-0/+30
* pci/mjg-pci-roms-from-efi: x86: Use PCI setup data PCI: Add support for non-BAR ROMs PCI: Add pcibios_add_device EFI: Stash ROMs if they're not in the PCI BAR
2012-12-05x86: Use PCI setup dataMatthew Garrett1-0/+30
EFI can provide PCI ROMs out of band via boot services, which may not be available after boot. Add support for using the data handed off to us by the boot stub or bootloader. [bhelgaas: added Seth's boot_params section mismatch fix] [bhelgaas: drop "boot_params.hdr.version < 0x0209" test] Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Seth Forshee <seth.forshee@canonical.com>
2012-11-09Merge branch 'pci/mike-x86-tra' into nextBjorn Helgaas1-3/+18
* pci/mike-x86-tra: x86/PCI: Allow x86 platforms to use translation offsets
2012-11-09Merge branch 'pci/taku-prt-cleanup' into nextBjorn Helgaas1-1/+1
* pci/taku-prt-cleanup: PCI/ACPI: Request _OSC control before scanning PCI root bus PCI: Don't pass pci_dev to pci_ext_cfg_avail() PCI/ACPI: Add _PRT interrupt routing info before enumerating devices ACPI: Pass segment/bus to _PRT add/del so they don't depend on pci_bus
2012-11-07x86/PCI: Allow x86 platforms to use translation offsetsMike Yoknis1-3/+18
The memory range descriptors in the _CRS control method contain an address translation offset for host bridges. This value is used to translate addresses across the bridge. The support to use _TRA values is present for other architectures but not for X86 platforms. For existing X86 platforms the _TRA value is zero. Non-zero _TRA values are expected on future X86 platforms. This change will register that value with the resource. Signed-off-by: Mike Yoknis <mike.yoknis@hp.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-11-07x86/PCI: Ignore _SEG on HP xw9300Bjorn Helgaas1-2/+23
The xw9300 BIOS supplies _SEG methods that are incorrect, which results in some LSI SCSI devices not being discovered. This adds a quirk to ignore _SEG on this machine and default to zero. The xw9300 has three host bridges: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f]) ACPI: PCI Root Bridge [PCI1] (domain 0001 [bus 40-7f]) ACPI: PCI Root Bridge [PCI2] (domain 0002 [bus 80-ff]) When the BIOS "ACPI Bus Segmentation" option is enabled (as it is by default), the _SEG methods of the PCI1 and PCI2 bridges return 1 and 2, respectively. However, the BIOS implementation appears to be incomplete, and we can't enumerate devices in those domains. But if we assume PCI1 and PCI2 really lead to buses in domain 0, everything works fine. Windows XP and Vista also seem to ignore these _SEG methods. Reference: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=543308 Reference: https://bugzilla.kernel.org/show_bug.cgi?id=15362 Reported-and-Tested-by: Sean M. Pappalardo <pegasus@renegadetech.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-11-07PCI: Don't pass pci_dev to pci_ext_cfg_avail()Taku Izumi1-1/+1
pci_ext_cfg_avail() doesn't use the "struct pci_dev *" passed to it, and there's no requirement that a host bridge even be represented by a pci_dev. This drops the pci_ext_cfg_avail() parameter. [bhelgaas: changelog] Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-10-30x86/ce4100: Fix PCI configuration register access for devices without interruptsMaxime Bizon1-0/+13
Some CE4100 devices such as the: - DFX module (01:0b.7) - entertainment encryption device (01:10.0) - multimedia controller (01:12.0) do not have a device interrupt at all. This patch fixes the PCI controller code to declare the missing PCI configuration register space, as well as a fixup method for forcing the interrupt pin to be 0 for these devices. This is required to ensure that pci drivers matching on these devices will be able to honor the various PCI subsystem calls touching the configuration space. Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Florian Fainelli <ffainelli@freebox.fr> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: rui.zhang@intel.com Cc: alan@linux.intel.com Link: http://lkml.kernel.org/r/1351518020-25556-4-git-send-email-ffainelli@freebox.fr Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-10-01Merge tag 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds2-7/+1
Pull PCI changes from Bjorn Helgaas: "Host bridge hotplug - Protect acpi_pci_drivers and acpi_pci_roots (Taku Izumi) - Clear host bridge resource info to avoid issue when releasing (Yinghai Lu) - Notify acpi_pci_drivers when hot-plugging host bridges (Jiang Liu) - Use standard list ops for acpi_pci_drivers (Jiang Liu) Device hotplug - Use pci_get_domain_bus_and_slot() to close hotplug races (Jiang Liu) - Remove fakephp driver (Bjorn Helgaas) - Fix VGA ref count in hotplug remove path (Yinghai Lu) - Allow acpiphp to handle PCIe ports without native hotplug (Jiang Liu) - Implement resume regardless of pciehp_force param (Oliver Neukum) - Make pci_fixup_irqs() work after init (Thierry Reding) Miscellaneous - Add pci_pcie_type(dev) and remove pci_dev.pcie_type (Yijing Wang) - Factor out PCI Express Capability accessors (Jiang Liu) - Add pcibios_window_alignment() so powerpc EEH can use generic resource assignment (Gavin Shan) - Make pci_error_handlers const (Stephen Hemminger) - Cleanup drivers/pci/remove.c (Bjorn Helgaas) - Improve Vendor-Specific Extended Capability support (Bjorn Helgaas) - Use standard list ops for bus->devices (Bjorn Helgaas) - Avoid kmalloc in pci_get_subsys() and pci_get_class() (Feng Tang) - Reassign invalid bus number ranges (Intel DP43BF workaround) (Yinghai Lu)" * tag 'for-3.7' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (102 commits) PCI: acpiphp: Handle PCIe ports without native hotplug capability PCI/ACPI: Use acpi_driver_data() rather than searching acpi_pci_roots PCI/ACPI: Protect acpi_pci_roots list with mutex PCI/ACPI: Use acpi_pci_root info rather than looking it up again PCI/ACPI: Pass acpi_pci_root to acpi_pci_drivers' add/remove interface PCI/ACPI: Protect acpi_pci_drivers list with mutex PCI/ACPI: Notify acpi_pci_drivers when hot-plugging PCI root bridges PCI/ACPI: Use normal list for struct acpi_pci_driver PCI/ACPI: Use DEVICE_ACPI_HANDLE rather than searching acpi_pci_roots PCI: Fix default vga ref_count ia64/PCI: Clear host bridge aperture struct resource x86/PCI: Clear host bridge aperture struct resource PCI: Stop all children first, before removing all children Revert "PCI: Use hotplug-safe pci_get_domain_bus_and_slot()" PCI: Provide a default pcibios_update_irq() PCI: Discard __init annotations for pci_fixup_irqs() and related functions PCI: Use correct type when freeing bus resource list PCI: Check P2P bridge for invalid secondary/subordinate range PCI: Convert "new_id"/"remove_id" into generic pci_bus driver attributes xen-pcifront: Use hotplug-safe pci_get_domain_bus_and_slot() ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 10:01:35 +0000