diff options
Diffstat (limited to 'drivers/usb/musb')
-rw-r--r-- | drivers/usb/musb/Kconfig | 6 | ||||
-rw-r--r-- | drivers/usb/musb/blackfin.c | 24 | ||||
-rw-r--r-- | drivers/usb/musb/cppi_dma.c | 27 | ||||
-rw-r--r-- | drivers/usb/musb/musb_core.c | 2 | ||||
-rw-r--r-- | drivers/usb/musb/musb_core.h | 5 | ||||
-rw-r--r-- | drivers/usb/musb/musb_gadget.c | 10 | ||||
-rw-r--r-- | drivers/usb/musb/musbhsdma.c | 8 | ||||
-rw-r--r-- | drivers/usb/musb/omap2430.c | 5 | ||||
-rw-r--r-- | drivers/usb/musb/ux500.c | 2 |
9 files changed, 67 insertions, 22 deletions
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index 4cbb7e4b368d..74073b363c30 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -14,7 +14,7 @@ config USB_MUSB_HDRC select TWL4030_USB if MACH_OMAP_3430SDP select TWL6030_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA select USB_OTG_UTILS - tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)' + bool 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)' help Say Y here if your system has a dual role high speed USB controller based on the Mentor Graphics silicon IP. Then @@ -30,8 +30,8 @@ config USB_MUSB_HDRC If you do not know what this is, please say N. - To compile this driver as a module, choose M here; the - module will be called "musb-hdrc". +# To compile this driver as a module, choose M here; the +# module will be called "musb-hdrc". choice prompt "Platform Glue Layer" diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c index 52312e8af213..8e2a1ff8a35a 100644 --- a/drivers/usb/musb/blackfin.c +++ b/drivers/usb/musb/blackfin.c @@ -21,6 +21,7 @@ #include <asm/cacheflush.h> #include "musb_core.h" +#include "musbhsdma.h" #include "blackfin.h" struct bfin_glue { @@ -332,6 +333,27 @@ static int bfin_musb_set_mode(struct musb *musb, u8 musb_mode) return -EIO; } +static int bfin_musb_adjust_channel_params(struct dma_channel *channel, + u16 packet_sz, u8 *mode, + dma_addr_t *dma_addr, u32 *len) +{ + struct musb_dma_channel *musb_channel = channel->private_data; + + /* + * Anomaly 05000450 might cause data corruption when using DMA + * MODE 1 transmits with short packet. So to work around this, + * we truncate all MODE 1 transfers down to a multiple of the + * max packet size, and then do the last short packet transfer + * (if there is any) using MODE 0. + */ + if (ANOMALY_05000450) { + if (musb_channel->transmit && *mode == 1) + *len = *len - (*len % packet_sz); + } + + return 0; +} + static void bfin_musb_reg_init(struct musb *musb) { if (ANOMALY_05000346) { @@ -430,6 +452,8 @@ static const struct musb_platform_ops bfin_ops = { .vbus_status = bfin_musb_vbus_status, .set_vbus = bfin_musb_set_vbus, + + .adjust_channel_params = bfin_musb_adjust_channel_params, }; static u64 bfin_dmamask = DMA_BIT_MASK(32); diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c index de55a3c3259a..ab434fbd8c35 100644 --- a/drivers/usb/musb/cppi_dma.c +++ b/drivers/usb/musb/cppi_dma.c @@ -597,12 +597,12 @@ cppi_next_tx_segment(struct musb *musb, struct cppi_channel *tx) length = min(n_bds * maxpacket, length); } - DBG(4, "TX DMA%d, pktSz %d %s bds %d dma 0x%x len %u\n", + DBG(4, "TX DMA%d, pktSz %d %s bds %d dma 0x%llx len %u\n", tx->index, maxpacket, rndis ? "rndis" : "transparent", n_bds, - addr, length); + (unsigned long long)addr, length); cppi_rndis_update(tx, 0, musb->ctrl_base, rndis); @@ -820,7 +820,7 @@ cppi_next_rx_segment(struct musb *musb, struct cppi_channel *rx, int onepacket) length = min(n_bds * maxpacket, length); DBG(4, "RX DMA%d seg, maxp %d %s bds %d (cnt %d) " - "dma 0x%x len %u %u/%u\n", + "dma 0x%llx len %u %u/%u\n", rx->index, maxpacket, onepacket ? (is_rndis ? "rndis" : "onepacket") @@ -829,7 +829,8 @@ cppi_next_rx_segment(struct musb *musb, struct cppi_channel *rx, int onepacket) musb_readl(tibase, DAVINCI_RXCPPI_BUFCNT0_REG + (rx->index * 4)) & 0xffff, - addr, length, rx->channel.actual_len, rx->buf_len); + (unsigned long long)addr, length, + rx->channel.actual_len, rx->buf_len); /* only queue one segment at a time, since the hardware prevents * correct queue shutdown after unexpected short packets @@ -1039,9 +1040,9 @@ static bool cppi_rx_scan(struct cppi *cppi, unsigned ch) if (!completed && (bd->hw_options & CPPI_OWN_SET)) break; - DBG(5, "C/RXBD %08x: nxt %08x buf %08x " + DBG(5, "C/RXBD %llx: nxt %08x buf %08x " "off.len %08x opt.len %08x (%d)\n", - bd->dma, bd->hw_next, bd->hw_bufp, + (unsigned long long)bd->dma, bd->hw_next, bd->hw_bufp, bd->hw_off_len, bd->hw_options, rx->channel.actual_len); @@ -1111,11 +1112,12 @@ static bool cppi_rx_scan(struct cppi *cppi, unsigned ch) musb_ep_select(cppi->mregs, rx->index + 1); csr = musb_readw(regs, MUSB_RXCSR); if (csr & MUSB_RXCSR_DMAENAB) { - DBG(4, "list%d %p/%p, last %08x%s, csr %04x\n", + DBG(4, "list%d %p/%p, last %llx%s, csr %04x\n", rx->index, rx->head, rx->tail, rx->last_processed - ? rx->last_processed->dma + ? (unsigned long long) + rx->last_processed->dma : 0, completed ? ", completed" : "", csr); @@ -1167,8 +1169,11 @@ irqreturn_t cppi_interrupt(int irq, void *dev_id) tx = musb_readl(tibase, DAVINCI_TXCPPI_MASKED_REG); rx = musb_readl(tibase, DAVINCI_RXCPPI_MASKED_REG); - if (!tx && !rx) + if (!tx && !rx) { + if (cppi->irq) + spin_unlock_irqrestore(&musb->lock, flags); return IRQ_NONE; + } DBG(4, "CPPI IRQ Tx%x Rx%x\n", tx, rx); @@ -1199,7 +1204,7 @@ irqreturn_t cppi_interrupt(int irq, void *dev_id) */ if (NULL == bd) { DBG(1, "null BD\n"); - tx_ram->tx_complete = 0; + musb_writel(&tx_ram->tx_complete, 0, 0); continue; } @@ -1452,7 +1457,7 @@ static int cppi_channel_abort(struct dma_channel *channel) * compare mode by writing 1 to the tx_complete register. */ cppi_reset_tx(tx_ram, 1); - cppi_ch->head = 0; + cppi_ch->head = NULL; musb_writel(&tx_ram->tx_complete, 0, 1); cppi_dump_tx(5, cppi_ch, " (done teardown)"); diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 630ae7f3cd4c..f10ff00ca09e 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1030,6 +1030,7 @@ static void musb_shutdown(struct platform_device *pdev) struct musb *musb = dev_to_musb(&pdev->dev); unsigned long flags; + pm_runtime_get_sync(musb->controller); spin_lock_irqsave(&musb->lock, flags); musb_platform_disable(musb); musb_generic_disable(musb); @@ -1040,6 +1041,7 @@ static void musb_shutdown(struct platform_device *pdev) musb_writeb(musb->mregs, MUSB_DEVCTL, 0); musb_platform_exit(musb); + pm_runtime_put(musb->controller); /* FIXME power down */ } diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 4bd9e2145ee4..0e053b587960 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -261,6 +261,7 @@ enum musb_g_ep0_state { * @try_ilde: tries to idle the IP * @vbus_status: returns vbus status if possible * @set_vbus: forces vbus status + * @channel_program: pre check for standard dma channel_program func */ struct musb_platform_ops { int (*init)(struct musb *musb); @@ -274,6 +275,10 @@ struct musb_platform_ops { int (*vbus_status)(struct musb *musb); void (*set_vbus)(struct musb *musb, int on); + + int (*adjust_channel_params)(struct dma_channel *channel, + u16 packet_sz, u8 *mode, + dma_addr_t *dma_addr, u32 *len); }; /* diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 98519c5d8b5c..f47c20197c61 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -535,7 +535,7 @@ void musb_g_tx(struct musb *musb, u8 epnum) is_dma = 1; csr |= MUSB_TXCSR_P_WZC_BITS; csr &= ~(MUSB_TXCSR_DMAENAB | MUSB_TXCSR_P_UNDERRUN | - MUSB_TXCSR_TXPKTRDY); + MUSB_TXCSR_TXPKTRDY | MUSB_TXCSR_AUTOSET); musb_writew(epio, MUSB_TXCSR, csr); /* Ensure writebuffer is empty. */ csr = musb_readw(epio, MUSB_TXCSR); @@ -1296,7 +1296,7 @@ static int musb_gadget_dequeue(struct usb_ep *ep, struct usb_request *request) } /* if the hardware doesn't have the request, easy ... */ - if (musb_ep->req_list.next != &request->list || musb_ep->busy) + if (musb_ep->req_list.next != &req->list || musb_ep->busy) musb_g_giveback(musb_ep, request, -ECONNRESET); /* ... else abort the dma transfer ... */ @@ -1887,11 +1887,9 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver, otg_set_vbus(musb->xceiv, 1); hcd->self.uses_pio_for_control = 1; - - if (musb->xceiv->last_event == USB_EVENT_NONE) - pm_runtime_put(musb->controller); - } + if (musb->xceiv->last_event == USB_EVENT_NONE) + pm_runtime_put(musb->controller); return 0; diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c index 0144a2d481fd..d281792db05c 100644 --- a/drivers/usb/musb/musbhsdma.c +++ b/drivers/usb/musb/musbhsdma.c @@ -169,6 +169,14 @@ static int dma_channel_program(struct dma_channel *channel, BUG_ON(channel->status == MUSB_DMA_STATUS_UNKNOWN || channel->status == MUSB_DMA_STATUS_BUSY); + /* Let targets check/tweak the arguments */ + if (musb->ops->adjust_channel_params) { + int ret = musb->ops->adjust_channel_params(channel, + packet_sz, &mode, &dma_addr, &len); + if (ret) + return ret; + } + /* * The DMA engine in RTL1.8 and above cannot handle * DMA addresses that are not aligned to a 4 byte boundary. diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 25cb8b0003b1..e9e60b6e0583 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -259,9 +259,10 @@ static int musb_otg_notifications(struct notifier_block *nb, case USB_EVENT_VBUS: DBG(4, "VBUS Connect\n"); +#ifdef CONFIG_USB_GADGET_MUSB_HDRC if (musb->gadget_driver) pm_runtime_get_sync(musb->controller); - +#endif otg_init(musb->xceiv); break; @@ -269,7 +270,7 @@ static int musb_otg_notifications(struct notifier_block *nb, DBG(4, "VBUS Disconnect\n"); #ifdef CONFIG_USB_GADGET_MUSB_HDRC - if (is_otg_enabled(musb)) + if (is_otg_enabled(musb) || is_peripheral_enabled(musb)) if (musb->gadget_driver) #endif { diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c index d6384e4aeef9..f7e04bf34a13 100644 --- a/drivers/usb/musb/ux500.c +++ b/drivers/usb/musb/ux500.c @@ -93,6 +93,8 @@ static int __init ux500_probe(struct platform_device *pdev) } musb->dev.parent = &pdev->dev; + musb->dev.dma_mask = pdev->dev.dma_mask; + musb->dev.coherent_dma_mask = pdev->dev.coherent_dma_mask; glue->dev = &pdev->dev; glue->musb = musb; |