diff options
Diffstat (limited to 'arch')
286 files changed, 10233 insertions, 6731 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 6dfbd52694ab..a54a9a2e36f3 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -11,6 +11,11 @@ config PPC64 This option selects whether a 32-bit or a 64-bit kernel will be built. +config PPC_PM_NEEDS_RTC_LIB + bool + select RTC_LIB + default y if PM + config PPC32 bool default y if !PPC64 @@ -89,7 +94,7 @@ config SCHED_NO_NO_OMIT_FRAME_POINTER config ARCH_MAY_HAVE_PC_FDC bool - default y + default !PPC_PSERIES || PCI config PPC_OF def_bool y @@ -157,17 +162,20 @@ config PPC_83xx select FSL_SOC select 83xx select PPC_FPU + select WANT_DEVICE_TREE config PPC_85xx bool "Freescale 85xx" select E500 select FSL_SOC select 85xx + select WANT_DEVICE_TREE config PPC_86xx bool "Freescale 86xx" select 6xx select FSL_SOC + select FSL_PCIE select PPC_FPU select ALTIVEC help @@ -186,7 +194,6 @@ config 44x bool "AMCC 44x" select PPC_DCR_NATIVE - config E200 bool "Freescale e200" @@ -367,394 +374,7 @@ endmenu source "init/Kconfig" -menu "Platform support" - depends on PPC64 || CLASSIC32 - -choice - prompt "Machine type" - default PPC_MULTIPLATFORM - -config PPC_MULTIPLATFORM - bool "Generic desktop/server/laptop" - help - Select this option if configuring for an IBM pSeries or - RS/6000 machine, an Apple machine, or a PReP, CHRP, - Maple or Cell-based machine. - -config EMBEDDED6xx - bool "Embedded 6xx/7xx/7xxx-based board" - depends on PPC32 && (BROKEN||BROKEN_ON_SMP) - -config APUS - bool "Amiga-APUS" - depends on PPC32 && BROKEN - help - Select APUS if configuring for a PowerUP Amiga. - More information is available at: - <http://linux-apus.sourceforge.net/>. -endchoice - -config QUICC_ENGINE - bool - depends on PPC_MPC836x || PPC_MPC832x - default y - help - The QUICC Engine (QE) is a new generation of communications - coprocessors on Freescale embedded CPUs (akin to CPM in older chips). - Selecting this option means that you wish to build a kernel - for a machine with a QE coprocessor. - -config PPC_PSERIES - depends on PPC_MULTIPLATFORM && PPC64 - bool "IBM pSeries & new (POWER5-based) iSeries" - select MPIC - select PPC_I8259 - select PPC_RTAS - select RTAS_ERROR_LOGGING - select PPC_UDBG_16550 - select PPC_NATIVE - default y - -config PPC_ISERIES - bool "IBM Legacy iSeries" - depends on PPC_MULTIPLATFORM && PPC64 - select PPC_INDIRECT_IO - -config PPC_CHRP - bool "Common Hardware Reference Platform (CHRP) based machines" - depends on PPC_MULTIPLATFORM && PPC32 - select MPIC - select PPC_I8259 - select PPC_INDIRECT_PCI - select PPC_RTAS - select PPC_MPC106 - select PPC_UDBG_16550 - select PPC_NATIVE - default y - -config PPC_MPC52xx - bool - default n - -config PPC_MPC5200 - bool - select PPC_MPC52xx - default n - -config PPC_MPC5200_BUGFIX - bool "MPC5200 (L25R) bugfix support" - depends on PPC_MPC5200 - default n - help - Enable workarounds for original MPC5200 errata. This is not required - for MPC5200B based boards. - - It is safe to say 'Y' here - -config PPC_EFIKA - bool "bPlan Efika 5k2. MPC5200B based computer" - depends on PPC_MULTIPLATFORM && PPC32 - select PPC_RTAS - select RTAS_PROC - select PPC_MPC52xx - select PPC_NATIVE - default n - -config PPC_LITE5200 - bool "Freescale Lite5200 Eval Board" - depends on PPC_MULTIPLATFORM && PPC32 - select PPC_MPC5200 - default n - -config PPC_PMAC - bool "Apple PowerMac based machines" - depends on PPC_MULTIPLATFORM - select MPIC - select PPC_INDIRECT_PCI if PPC32 - select PPC_MPC106 if PPC32 - select PPC_NATIVE - default y - -config PPC_PMAC64 - bool - depends on PPC_PMAC && POWER4 - select MPIC - select U3_DART - select MPIC_BROKEN_U3 - select GENERIC_TBSYNC - select PPC_970_NAP - default y - -config PPC_PREP - bool "PowerPC Reference Platform (PReP) based machines" - depends on PPC_MULTIPLATFORM && PPC32 && BROKEN - select MPIC - select PPC_I8259 - select PPC_INDIRECT_PCI - select PPC_UDBG_16550 - select PPC_NATIVE - default n - -config PPC_MAPLE - depends on PPC_MULTIPLATFORM && PPC64 - bool "Maple 970FX Evaluation Board" - select MPIC - select U3_DART - select MPIC_BROKEN_U3 - select GENERIC_TBSYNC - select PPC_UDBG_16550 - select PPC_970_NAP - select PPC_NATIVE - select PPC_RTAS - select MMIO_NVRAM - select ATA_NONSTANDARD if ATA - default n - help - This option enables support for the Maple 970FX Evaluation Board. - For more information, refer to <http://www.970eval.com> - -config PPC_PASEMI - depends on PPC_MULTIPLATFORM && PPC64 - bool "PA Semi SoC-based platforms" - default n - select MPIC - select PPC_UDBG_16550 - select GENERIC_TBSYNC - select PPC_NATIVE - help - This option enables support for PA Semi's PWRficient line - of SoC processors, including PA6T-1682M - -config PPC_CELL - bool - default n - -config PPC_CELL_NATIVE - bool - select PPC_CELL - select PPC_DCR_MMIO - select PPC_OF_PLATFORM_PCI - select PPC_INDIRECT_IO - select PPC_NATIVE - select MPIC - default n - -config PPC_IBM_CELL_BLADE - bool "IBM Cell Blade" - depends on PPC_MULTIPLATFORM && PPC64 - select PPC_CELL_NATIVE - select PPC_RTAS - select MMIO_NVRAM - select PPC_UDBG_16550 - select UDBG_RTAS_CONSOLE - -config PPC_PS3 - bool "Sony PS3 (incomplete)" - depends on PPC_MULTIPLATFORM && PPC64 - select PPC_CELL - select USB_ARCH_HAS_OHCI - select USB_OHCI_LITTLE_ENDIAN - select USB_OHCI_BIG_ENDIAN_MMIO - select USB_ARCH_HAS_EHCI - select USB_EHCI_BIG_ENDIAN_MMIO - help - This option enables support for the Sony PS3 game console - and other platforms using the PS3 hypervisor. - Support for this platform is not yet complete, so - enabling this will not result in a bootable kernel on a - PS3 system. - -config PPC_CELLEB - bool "Toshiba's Cell Reference Set 'Celleb' Architecture" - depends on PPC_MULTIPLATFORM && PPC64 - select PPC_CELL - select PPC_OF_PLATFORM_PCI - select HAS_TXX9_SERIAL - select PPC_UDBG_BEAT - select USB_OHCI_BIG_ENDIAN_MMIO - select USB_EHCI_BIG_ENDIAN_MMIO - -config PPC_NATIVE - bool - depends on PPC_MULTIPLATFORM - help - Support for running natively on the hardware, i.e. without - a hypervisor. This option is not user-selectable but should - be selected by all platforms that need it. - -config UDBG_RTAS_CONSOLE - bool "RTAS based debug console" - depends on PPC_RTAS - default n - -config PPC_UDBG_BEAT - bool "BEAT based debug console" - depends on PPC_CELLEB - default n - -config XICS - depends on PPC_PSERIES - bool - default y - -config U3_DART - bool - depends on PPC_MULTIPLATFORM && PPC64 - default n - -config PPC_RTAS - bool - default n - -config RTAS_ERROR_LOGGING - bool - depends on PPC_RTAS - default n - -config RTAS_PROC - bool "Proc interface to RTAS" - depends on PPC_RTAS - default y - -config RTAS_FLASH - tristate "Firmware flash interface" - depends on PPC64 && RTAS_PROC - -config PPC_PMI - tristate "Support for PMI" - depends PPC_IBM_CELL_BLADE - help - PMI (Platform Management Interrupt) is a way to - communicate with the BMC (Baseboard Mangement Controller). - It is used in some IBM Cell blades. - default m - -config MMIO_NVRAM - bool - default n - -config MPIC_BROKEN_U3 - bool - depends on PPC_MAPLE - default y - -config IBMVIO - depends on PPC_PSERIES || PPC_ISERIES - bool - default y - -config IBMEBUS - depends on PPC_PSERIES - bool "Support for GX bus based adapters" - help - Bus device driver for GX bus based adapters. - -config PPC_MPC106 - bool - default n - -config PPC_970_NAP - bool - default n - -config PPC_INDIRECT_IO - bool - select GENERIC_IOMAP - default n - -config GENERIC_IOMAP - bool - default n - -source "drivers/cpufreq/Kconfig" - -config CPU_FREQ_PMAC - bool "Support for Apple PowerBooks" - depends on CPU_FREQ && ADB_PMU && PPC32 - select CPU_FREQ_TABLE - help - This adds support for frequency switching on Apple PowerBooks, - this currently includes some models of iBook & Titanium - PowerBook. - -config CPU_FREQ_PMAC64 - bool "Support for some Apple G5s" - depends on CPU_FREQ && PPC64 - select CPU_FREQ_TABLE - help - This adds support for frequency switching on Apple iMac G5, - and some of the more recent desktop G5 machines as well. - -config PPC601_SYNC_FIX - bool "Workarounds for PPC601 bugs" - depends on 6xx && (PPC_PREP || PPC_PMAC) - help - Some versions of the PPC601 (the first PowerPC chip) have bugs which - mean that extra synchronization instructions are required near - certain instructions, typically those that make major changes to the - CPU state. These extra instructions reduce performance slightly. - If you say N here, these extra instructions will not be included, - resulting in a kernel which will run faster but may not run at all - on some systems with the PPC601 chip. - - If in doubt, say Y here. - -config TAU - bool "On-chip CPU temperature sensor support" - depends on 6xx - help - G3 and G4 processors have an on-chip temperature sensor called the - 'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die - temperature within 2-4 degrees Celsius. This option shows the current - on-die temperature in /proc/cpuinfo if the cpu supports it. - - Unfortunately, on some chip revisions, this sensor is very inaccurate - and in many cases, does not work at all, so don't assume the cpu - temp is actually what /proc/cpuinfo says it is. - -config TAU_INT - bool "Interrupt driven TAU driver (DANGEROUS)" - depends on TAU - ---help--- - The TAU supports an interrupt driven mode which causes an interrupt - whenever the temperature goes out of range. This is the fastest way - to get notified the temp has exceeded a range. With this option off, - a timer is used to re-check the temperature periodically. - - However, on some cpus it appears that the TAU interrupt hardware - is buggy and can cause a situation which would lead unexplained hard - lockups. - - Unless you are extending the TAU driver, or enjoy kernel/hardware - debugging, leave this option off. - -config TAU_AVERAGE - bool "Average high and low temp" - depends on TAU - ---help--- - The TAU hardware can compare the temperature to an upper and lower - bound. The default behavior is to show both the upper and lower - bound in /proc/cpuinfo. If the range is large, the temperature is - either changing a lot, or the TAU hardware is broken (likely on some - G4's). If the range is small (around 4 degrees), the temperature is - relatively stable. If you say Y here, a single temperature value, - halfway between the upper and lower bounds, will be reported in - /proc/cpuinfo. - - If in doubt, say N here. - -endmenu - -source arch/powerpc/platforms/embedded6xx/Kconfig -source arch/powerpc/platforms/4xx/Kconfig -source arch/powerpc/platforms/82xx/Kconfig -source arch/powerpc/platforms/83xx/Kconfig -source arch/powerpc/platforms/85xx/Kconfig -source arch/powerpc/platforms/86xx/Kconfig -source arch/powerpc/platforms/8xx/Kconfig -source arch/powerpc/platforms/cell/Kconfig -source arch/powerpc/platforms/ps3/Kconfig -source arch/powerpc/platforms/pasemi/Kconfig +source "arch/powerpc/platforms/Kconfig" menu "Kernel options" @@ -837,15 +457,6 @@ config CRASH_DUMP Don't change this unless you know what you are doing. -config EMBEDDEDBOOT - bool - depends on 8xx || 8260 - default y - -config PC_KEYBOARD - bool "PC PS/2 style Keyboard" - depends on 4xx || CPM2 - config PPCBUG_NVRAM bool "Enable reading PPCBUG NVRAM during boot" if PPLUS || LOPEC default y if PPC_PREP @@ -859,8 +470,6 @@ config IRQ_ALL_CPUS CPU. Generally saying Y is safe, although some problems have been reported with SMP Power Macintoshes with this option enabled. -source "arch/powerpc/platforms/pseries/Kconfig" - config NUMA bool "NUMA support" depends on PPC64 @@ -910,10 +519,10 @@ config PPC_64K_PAGES depends on PPC64 help This option changes the kernel logical page size to 64k. On machines - without processor support for 64k pages, the kernel will simulate - them by loading each individual 4k page on demand transparently, - while on hardware with such support, it will be used to map - normal application pages. + without processor support for 64k pages, the kernel will simulate + them by loading each individual 4k page on demand transparently, + while on hardware with such support, it will be used to map + normal application pages. config SCHED_SMT bool "SMT (Hyperthreading) scheduler support" @@ -931,8 +540,6 @@ config PROC_DEVICETREE an image of the device tree that the kernel copies from Open Firmware or other boot firmware. If unsure, say Y here. -source "arch/powerpc/platforms/prep/Kconfig" - config CMDLINE_BOOL bool "Default bootloader kernel arguments" @@ -967,6 +574,29 @@ config SECCOMP If unsure, say Y. Only embedded should say N here. +config WANT_DEVICE_TREE + bool + default n + +config DEVICE_TREE + string "Static device tree source file" + depends on WANT_DEVICE_TREE + help + This specifies the device tree source (.dts) file to be + compiled and included when building the bootwrapper. If a + relative filename is given, then it will be relative to + arch/powerpc/boot/dts. If you are not using the bootwrapper, + or do not need to build a dts into the bootwrapper, this + field is ignored. + + For example, this is required when building a cuImage target + for an older U-Boot, which cannot pass a device tree itself. + Such a kernel will not work with a newer U-Boot that tries to + pass a device tree (unless you tell it not to). If your U-Boot + does not mention a device tree in "help bootm", then use the + cuImage target and specify a device tree here. Otherwise, use + the uImage target and leave this field blank. + endmenu config ISA_DMA_API @@ -995,24 +625,17 @@ config GENERIC_ISA_DMA depends on PPC64 || POWER4 || 6xx && !CPM2 default y -config MPIC - bool - default n - -config MPIC_WEIRD - bool - default n - -config PPC_I8259 - bool - default n - config PPC_INDIRECT_PCI bool depends on PCI default y if 40x || 44x default n +config PPC_INDIRECT_PCI_BE + bool + depends PPC_INDIRECT_PCI + default n + config EISA bool @@ -1022,13 +645,18 @@ config SBUS config FSL_SOC bool +config FSL_PCIE + bool + depends on PPC_86xx + # Yes MCA RS/6000s exist but Linux-PPC does not currently support any config MCA bool config PCI bool "PCI support" if 40x || CPM2 || PPC_83xx || PPC_85xx || PPC_86xx \ - || PPC_MPC52xx || (EMBEDDED && PPC_ISERIES) || MPC7448HPC2 || PPC_PS3 + || PPC_MPC52xx || (EMBEDDED && (PPC_PSERIES || PPC_ISERIES)) \ + || MPC7448HPC2 || PPC_PS3 default y if !40x && !CPM2 && !8xx && !APUS && !PPC_83xx \ && !PPC_85xx && !PPC_86xx default PCI_PERMEDIA if !4xx && !CPM2 && !8xx && APUS @@ -1228,12 +856,10 @@ source "fs/Kconfig" source "arch/powerpc/sysdev/qe_lib/Kconfig" -source "arch/powerpc/platforms/iseries/Kconfig" - source "lib/Kconfig" menu "Instrumentation Support" - depends on EXPERIMENTAL + depends on EXPERIMENTAL source "arch/powerpc/oprofile/Kconfig" diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index d39d13327e6d..86aa3745af7f 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -18,6 +18,15 @@ config DEBUG_STACK_USAGE This option will slow down process creation somewhat. +config DEBUG_PAGEALLOC + bool "Debug page memory allocations" + depends on DEBUG_KERNEL && !SOFTWARE_SUSPEND + help + Unmap pages from the kernel linear mapping after free_pages(). + This results in a large slowdown, but helps to find certain types + of memory corruptions. + + config HCALL_STATS bool "Hypervisor call instrumentation" depends on PPC_PSERIES && DEBUG_FS @@ -132,8 +141,7 @@ config BOOTX_TEXT config SERIAL_TEXT_DEBUG bool "Support for early boot texts over serial port" - depends on 4xx || LOPEC || MV64X60 || PPLUS || PRPMC800 || \ - PPC_GEN550 || PPC_MPC52xx + depends on 4xx config PPC_EARLY_DEBUG bool "Early debugging (dangerous)" diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index a00fe7236555..794992025d8d 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -102,9 +102,9 @@ CFLAGS += $(call cc-option,-mno-altivec) # kernel considerably. CFLAGS += $(call cc-option,-funit-at-a-time) -ifndef CONFIG_FSL_BOOKE -CFLAGS += -mstring -endif +# Never use string load/store instructions as they are +# often slow when they are implemented at all +CFLAGS += -mno-string ifeq ($(CONFIG_6xx),y) CFLAGS += -mcpu=powerpc @@ -148,7 +148,7 @@ all: $(KBUILD_IMAGE) CPPFLAGS_vmlinux.lds := -Upowerpc -BOOT_TARGETS = zImage zImage.initrd uImage +BOOT_TARGETS = zImage zImage.initrd uImage cuImage PHONY += $(BOOT_TARGETS) @@ -166,6 +166,9 @@ define archhelp @echo ' *_defconfig - Select default config from arch/$(ARCH)/configs' endef +install: + $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) install + archclean: $(Q)$(MAKE) $(clean)=$(boot) diff --git a/arch/powerpc/boot/.gitignore b/arch/powerpc/boot/.gitignore index 0734b2fc1d95..eec7af7e5993 100644 --- a/arch/powerpc/boot/.gitignore +++ b/arch/powerpc/boot/.gitignore @@ -18,6 +18,9 @@ kernel-vmlinux.strip.c kernel-vmlinux.strip.gz mktree uImage +cuImage +cuImage.bin.gz +cuImage.elf zImage zImage.chrp zImage.coff diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index dc779407de14..3716594ea33e 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -40,10 +40,11 @@ zliblinuxheader := zlib.h zconf.h zutil.h $(addprefix $(obj)/,$(zlib) main.o): $(addprefix $(obj)/,$(zliblinuxheader)) \ $(addprefix $(obj)/,$(zlibheader)) -src-wlib := string.S stdio.c main.c flatdevtree.c flatdevtree_misc.c \ - ns16550.c serial.c simple_alloc.c div64.S util.S $(zlib) -src-plat := of.c -src-boot := crt0.S $(src-wlib) $(src-plat) empty.c +src-wlib := string.S crt0.S stdio.c main.c flatdevtree.c flatdevtree_misc.c \ + ns16550.c serial.c simple_alloc.c div64.S util.S \ + gunzip_util.c elf_util.c $(zlib) devtree.c +src-plat := of.c cuboot-83xx.c cuboot-85xx.c +src-boot := $(src-wlib) $(src-plat) empty.c src-boot := $(addprefix $(obj)/, $(src-boot)) obj-boot := $(addsuffix .o, $(basename $(src-boot))) @@ -75,7 +76,7 @@ $(obj)/zImage.lds $(obj)/zImage.coff.lds: $(obj)/%: $(srctree)/$(src)/%.S @cp $< $@ clean-files := $(zlib) $(zlibheader) $(zliblinuxheader) \ - empty.c zImage zImage.coff.lds zImage.lds zImage.sandpoint + empty.c zImage.coff.lds zImage.lds quiet_cmd_bootcc = BOOTCC $@ cmd_bootcc = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTCFLAGS) -c -o $@ $< @@ -84,23 +85,25 @@ quiet_cmd_bootas = BOOTAS $@ cmd_bootas = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTAFLAGS) -c -o $@ $< quiet_cmd_bootar = BOOTAR $@ - cmd_bootar = $(CROSS32AR) -cr $@.$$$$ $^; mv $@.$$$$ $@ + cmd_bootar = $(CROSS32AR) -cr $@.$$$$ $(filter-out FORCE,$^); mv $@.$$$$ $@ -$(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c +$(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c FORCE $(call if_changed_dep,bootcc) -$(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S +$(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S FORCE $(call if_changed_dep,bootas) -$(obj)/wrapper.a: $(obj-wlib) - $(call cmd,bootar) +$(obj)/wrapper.a: $(obj-wlib) FORCE + $(call if_changed,bootar) hostprogs-y := addnote addRamDisk hack-coff mktree -extra-y := $(obj)/crt0.o $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \ +targets += $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a) +extra-y := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \ $(obj)/zImage.lds $(obj)/zImage.coff.lds wrapper :=$(srctree)/$(src)/wrapper -wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree) +wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree) \ + $(wrapper) FORCE ############# # Bits for building various flavours of zImage @@ -113,50 +116,10 @@ CROSSWRAP := -C "$(CROSS_COMPILE)" endif endif +# args (to if_changed): 1 = (this rule), 2 = platform, 3 = dts 4=dtb 5=initrd quiet_cmd_wrap = WRAP $@ - cmd_wrap =$(CONFIG_SHELL) $(wrapper) -c -o $@ -p $2 $(CROSSWRAP) vmlinux -quiet_cmd_wrap_initrd = WRAP $@ - cmd_wrap_initrd =$(CONFIG_SHELL) $(wrapper) -c -o $@ -p $2 $(CROSSWRAP) \ - -i $(obj)/ramdisk.image.gz vmlinux - -$(obj)/zImage.chrp: vmlinux $(wrapperbits) - $(call cmd,wrap,chrp) - -$(obj)/zImage.initrd.chrp: vmlinux $(wrapperbits) - $(call cmd,wrap_initrd,chrp) - -$(obj)/zImage.pseries: vmlinux $(wrapperbits) - $(call cmd,wrap,pseries) - -$(obj)/zImage.initrd.pseries: vmlinux $(wrapperbits) - $(call cmd,wrap_initrd,pseries) - -$(obj)/zImage.pmac: vmlinux $(wrapperbits) - $(call cmd,wrap,pmac) - -$(obj)/zImage.initrd.pmac: vmlinux $(wrapperbits) - $(call cmd,wrap_initrd,pmac) - -$(obj)/zImage.coff: vmlinux $(wrapperbits) - $(call cmd,wrap,pmaccoff) - -$(obj)/zImage.initrd.coff: vmlinux $(wrapperbits) - $(call cmd,wrap_initrd,pmaccoff) - -$(obj)/zImage.miboot: vmlinux $(wrapperbits) - $(call cmd,wrap,miboot) - -$(obj)/zImage.initrd.miboot: vmlinux $(wrapperbits) - $(call cmd,wrap_initrd,miboot) - -$(obj)/zImage.ps3: vmlinux - $(STRIP) -s -R .comment $< -o $@ - -$(obj)/zImage.initrd.ps3: vmlinux - @echo " WARNING zImage.initrd.ps3 not supported (yet)" - -$(obj)/uImage: vmlinux $(wrapperbits) - $(call cmd,wrap,uboot) + cmd_wrap =$(CONFIG_SHELL) $(wrapper) -c -o $@ -p $2 $(CROSSWRAP) \ + $(if $3, -s $3)$(if $4, -d $4)$(if $5, -i $5) vmlinux image-$(CONFIG_PPC_PSERIES) += zImage.pseries image-$(CONFIG_PPC_MAPLE) += zImage.pseries @@ -166,7 +129,7 @@ image-$(CONFIG_PPC_CELLEB) += zImage.pseries image-$(CONFIG_PPC_CHRP) += zImage.chrp image-$(CONFIG_PPC_EFIKA) += zImage.chrp image-$(CONFIG_PPC_PMAC) += zImage.pmac -image-$(CONFIG_DEFAULT_UIMAGE) += uImage +image-$(CONFIG_DEFAULT_UIMAGE) += uImage cuImage # For 32-bit powermacs, build the COFF and miboot images # as well as the ELF images. @@ -174,16 +137,55 @@ ifeq ($(CONFIG_PPC32),y) image-$(CONFIG_PPC_PMAC) += zImage.coff zImage.miboot endif +initrd- := $(patsubst zImage%, zImage.initrd%, $(image-n) $(image-)) initrd-y := $(patsubst zImage%, zImage.initrd%, $(image-y)) +initrd-y := $(filter-out $(image-y), $(initrd-y)) +targets += $(image-y) $(initrd-y) + +$(addprefix $(obj)/, $(initrd-y)): $(obj)/ramdisk.image.gz + +# Don't put the ramdisk on the pattern rule; when its missing make will try +# the pattern rule with less dependencies that also matches (even with the +# hard dependency listed). +$(obj)/zImage.initrd.%: vmlinux $(wrapperbits) + $(call if_changed,wrap,$*,,,$(obj)/ramdisk.image.gz) + +$(obj)/zImage.%: vmlinux $(wrapperbits) + $(call if_changed,wrap,$*) + +$(obj)/zImage.ps3: vmlinux + $(STRIP) -s -R .comment $< -o $@ + +$(obj)/zImage.initrd.ps3: vmlinux + @echo " WARNING zImage.initrd.ps3 not supported (yet)" + +$(obj)/uImage: vmlinux $(wrapperbits) + $(call if_changed,wrap,uboot) + +cuboot-plat-$(CONFIG_83xx) += 83xx +cuboot-plat-$(CONFIG_85xx) += 85xx +cuboot-plat-y += unknown-platform + +dts = $(if $(shell echo $(CONFIG_DEVICE_TREE) | grep '^/'),\ + ,$(srctree)/$(src)/dts/)$(CONFIG_DEVICE_TREE) + +$(obj)/cuImage: vmlinux $(wrapperbits) + $(call if_changed,wrap,cuboot-$(word 1,$(cuboot-plat-y)),$(dts)) $(obj)/zImage: $(addprefix $(obj)/, $(image-y)) @rm -f $@; ln $< $@ $(obj)/zImage.initrd: $(addprefix $(obj)/, $(initrd-y)) @rm -f $@; ln $< $@ -install: $(CONFIGURE) $(image-y) +install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y)) sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" $< -clean-files += $(addprefix $(objtree)/, $(obj-boot) vmlinux.strip.gz) -clean-files += $(addprefix $(objtree)/, $(obj-boot) vmlinux.bin.gz) -clean-files += $(image-) +# anything not in $(targets) +clean-files += $(image-) $(initrd-) zImage zImage.initrd \ + cuImage.elf cuImage.bin.gz + +# clean up files cached by wrapper +clean-kernel := vmlinux.strip vmlinux.bin +clean-kernel += $(addsuffix .gz,$(clean-kernel)) +# If not absolute clean-files are relative to $(obj). +clean-files += $(addprefix $(objtree)/, $(clean-kernel)) diff --git a/arch/powerpc/boot/crt0.S b/arch/powerpc/boot/crt0.S index 70e65b13e033..5a4215c4b014 100644 --- a/arch/powerpc/boot/crt0.S +++ b/arch/powerpc/boot/crt0.S @@ -16,8 +16,11 @@ _zimage_start_opd: .long _zimage_start, 0, 0, 0 + .weak _zimage_start .globl _zimage_start _zimage_start: + .globl _zimage_start_lib +_zimage_start_lib: /* Work out the offset between the address we were linked at and the address where we're running. */ bl 1f @@ -44,7 +47,7 @@ _zimage_start: addi r9,r9,4 bdnz 2b - /* Do a cache flush for our text, in case OF didn't */ + /* Do a cache flush for our text, in case the loader didn't */ 3: lis r9,_start@ha addi r9,r9,_start@l add r9,r0,r9 @@ -59,6 +62,34 @@ _zimage_start: sync isync - mr r6,r1 - b start + /* Clear the BSS */ + lis r9,__bss_start@ha + addi r9,r9,__bss_start@l + add r9,r0,r9 + lis r8,_end@ha + addi r8,r8,_end@l + add r8,r0,r8 + li r10,0 +5: stw r10,0(r9) + addi r9,r9,4 + cmplw cr0,r9,r8 + blt 5b + /* Possibly set up a custom stack */ +.weak _platform_stack_top + lis r8,_platform_stack_top@ha + addi r8,r8,_platform_stack_top@l + cmpwi r8,0 + beq 6f + add r8,r0,r8 + lwz r1,0(r8) + add r1,r0,r1 + li r0,0 + stwu r0,-16(r1) /* establish a stack frame */ +6: + + /* Call platform_init() */ + bl platform_init + + /* Call start */ + b start diff --git a/arch/powerpc/boot/cuboot-83xx.c b/arch/powerpc/boot/cuboot-83xx.c new file mode 100644 index 000000000000..6cbc20afb4d8 --- /dev/null +++ b/arch/powerpc/boot/cuboot-83xx.c @@ -0,0 +1,68 @@ +/* + * Old U-boot compatibility for 83xx + * + * Author: Scott Wood <scottwood@freescale.com> + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ops.h" +#include "stdio.h" + +#define TARGET_83xx +#include "ppcboot.h" + +static bd_t bd; +extern char _end[]; +extern char _dtb_start[], _dtb_end[]; + +static void platform_fixups(void) +{ + void *soc; + + dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); + dt_fixup_mac_addresses(bd.bi_enetaddr, bd.bi_enet1addr); + dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 4, bd.bi_busfreq); + + /* Unfortunately, the specific model number is encoded in the + * soc node name in existing dts files -- once that is fixed, + * this can do a simple path lookup. + */ + soc = find_node_by_devtype(NULL, "soc"); + if (soc) { + void *serial = NULL; + + setprop(soc, "bus-frequency", &bd.bi_busfreq, + sizeof(bd.bi_busfreq)); + + while ((serial = find_node_by_devtype(serial, "serial"))) { + if (get_parent(serial) != soc) + continue; + + setprop(serial, "clock-frequency", &bd.bi_busfreq, + sizeof(bd.bi_busfreq)); + } + } +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + unsigned long end_of_ram = bd.bi_memstart + bd.bi_memsize; + unsigned long avail_ram = end_of_ram - (unsigned long)_end; + + memcpy(&bd, (bd_t *)r3, sizeof(bd)); + loader_info.initrd_addr = r4; + loader_info.initrd_size = r4 ? r5 : 0; + loader_info.cmdline = (char *)r6; + loader_info.cmdline_len = r7 - r6; + + simple_alloc_init(_end, avail_ram - 1024*1024, 32, 64); + ft_init(_dtb_start, _dtb_end - _dtb_start, 32); + serial_console_init(); + platform_ops.fixups = platform_fixups; +} diff --git a/arch/powerpc/boot/cuboot-85xx.c b/arch/powerpc/boot/cuboot-85xx.c new file mode 100644 index 000000000000..f88ba00ac122 --- /dev/null +++ b/arch/powerpc/boot/cuboot-85xx.c @@ -0,0 +1,69 @@ +/* + * Old U-boot compatibility for 85xx + * + * Author: Scott Wood <scottwood@freescale.com> + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ops.h" +#include "stdio.h" + +#define TARGET_85xx +#include "ppcboot.h" + +static bd_t bd; +extern char _end[]; +extern char _dtb_start[], _dtb_end[]; + +static void platform_fixups(void) +{ + void *soc; + + dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); + dt_fixup_mac_addresses(bd.bi_enetaddr, bd.bi_enet1addr, + bd.bi_enet2addr); + dt_fixup_cpu_clocks(bd.bi_intfreq, bd.bi_busfreq / 8, bd.bi_busfreq); + + /* Unfortunately, the specific model number is encoded in the + * soc node name in existing dts files -- once that is fixed, + * this can do a simple path lookup. + */ + soc = find_node_by_devtype(NULL, "soc"); + if (soc) { + void *serial = NULL; + + setprop(soc, "bus-frequency", &bd.bi_busfreq, + sizeof(bd.bi_busfreq)); + + while ((serial = find_node_by_devtype(serial, "serial"))) { + if (get_parent(serial) != soc) + continue; + + setprop(serial, "clock-frequency", &bd.bi_busfreq, + sizeof(bd.bi_busfreq)); + } + } +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + unsigned long end_of_ram = bd.bi_memstart + bd.bi_memsize; + unsigned long avail_ram = end_of_ram - (unsigned long)_end; + + memcpy(&bd, (bd_t *)r3, sizeof(bd)); + loader_info.initrd_addr = r4; + loader_info.initrd_size = r4 ? r5 : 0; + loader_info.cmdline = (char *)r6; + loader_info.cmdline_len = r7 - r6; + + simple_alloc_init(_end, avail_ram - 1024*1024, 32, 64); + ft_init(_dtb_start, _dtb_end - _dtb_start, 32); + serial_console_init(); + platform_ops.fixups = platform_fixups; +} diff --git a/arch/powerpc/boot/devtree.c b/arch/powerpc/boot/devtree.c new file mode 100644 index 000000000000..c9951550ed2c --- /dev/null +++ b/arch/powerpc/boot/devtree.c @@ -0,0 +1,307 @@ +/* + * devtree.c - convenience functions for device tree manipulation + * Copyright 2007 David Gibson, IBM Corporation. + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * + * Authors: David Gibson <david@gibson.dropbear.id.au> + * Scott Wood <scottwood@freescale.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <stdarg.h> +#include <stddef.h> +#include "types.h" +#include "string.h" +#include "stdio.h" +#include "ops.h" + +void dt_fixup_memory(u64 start, u64 size) +{ + void *root, *memory; + int naddr, nsize, i; + u32 memreg[4]; + + root = finddevice("/"); + if (getprop(root, "#address-cells", &naddr, sizeof(naddr)) < 0) + naddr = 2; + if (naddr < 1 || naddr > 2) + fatal("Can't cope with #address-cells == %d in /\n\r", naddr); + + if (getprop(root, "#size-cells", &nsize, sizeof(nsize)) < 0) + nsize = 1; + if (nsize < 1 || nsize > 2) + fatal("Can't cope with #size-cells == %d in /\n\r", nsize); + + i = 0; + if (naddr == 2) + memreg[i++] = start >> 32; + memreg[i++] = start & 0xffffffff; + if (nsize == 2) + memreg[i++] = size >> 32; + memreg[i++] = size & 0xffffffff; + + memory = finddevice("/memory"); + if (! memory) { + memory = create_node(NULL, "memory"); + setprop_str(memory, "device_type", "memory"); + } + + printf("Memory <- <0x%x", memreg[0]); + for (i = 1; i < (naddr + nsize); i++) + printf(" 0x%x", memreg[i]); + printf("> (%ldMB)\n\r", (unsigned long)(size >> 20)); + + setprop(memory, "reg", memreg, (naddr + nsize)*sizeof(u32)); +} + +#define MHZ(x) ((x + 500000) / 1000000) + +void dt_fixup_cpu_clocks(u32 cpu, u32 tb, u32 bus) +{ + void *devp = NULL; + + printf("CPU clock-frequency <- 0x%x (%dMHz)\n\r", cpu, MHZ(cpu)); + printf("CPU timebase-frequency <- 0x%x (%dMHz)\n\r", tb, MHZ(tb)); + if (bus > 0) + printf("CPU bus-frequency <- 0x%x (%dMHz)\n\r", bus, MHZ(bus)); + + while ((devp = find_node_by_devtype(devp, "cpu"))) { + setprop_val(devp, "clock-frequency", cpu); + setprop_val(devp, "timebase-frequency", tb); + if (bus > 0) + setprop_val(devp, "bus-frequency", bus); + } +} + +void dt_fixup_clock(const char *path, u32 freq) +{ + void *devp = finddevice(path); + + if (devp) { + printf("%s: clock-frequency <- %x (%dMHz)\n\r", path, freq, MHZ(freq)); + setprop_val(devp, "clock-frequency", freq); + } +} + +void __dt_fixup_mac_addresses(u32 startindex, ...) +{ + va_list ap; + u32 index = startindex; + void *devp; + const u8 *addr; + + va_start(ap, startindex); + while ((addr = va_arg(ap, const u8 *))) { + devp = find_node_by_prop_value(NULL, "linux,network-index", + (void*)&index, sizeof(index)); + + printf("ENET%d: local-mac-address <-" + " %02x:%02x:%02x:%02x:%02x:%02x\n\r", index, + addr[0], addr[1], addr[2], addr[3], addr[4], addr[5]); + + if (devp) + setprop(devp, "local-mac-address", addr, 6); + + index++; + } + va_end(ap); +} + +#define MAX_ADDR_CELLS 4 +#define MAX_RANGES 8 + +static void get_reg_format(void *node, u32 *naddr, u32 *nsize) +{ + if (getprop(node, "#address-cells", naddr, 4) != 4) + *naddr = 2; + if (getprop(node, "#size-cells", nsize, 4) != 4) + *nsize = 1; +} + +static void copy_val(u32 *dest, u32 *src, int naddr) +{ + int pad = MAX_ADDR_CELLS - naddr; + + memset(dest, 0, pad * 4); + memcpy(dest + pad, src, naddr * 4); +} + +static int sub_reg(u32 *reg, u32 *sub) +{ + int i, borrow = 0; + + for (i = MAX_ADDR_CELLS - 1; i >= 0; i--) { + int prev_borrow = borrow; + borrow = reg[i] < sub[i] + prev_borrow; + reg[i] -= sub[i] + prev_borrow; + } + + return !borrow; +} + +static int add_reg(u32 *reg, u32 *add, int naddr) +{ + int i, carry = 0; + + for (i = MAX_ADDR_CELLS - 1; i >= MAX_ADDR_CELLS - naddr; i--) { + u64 tmp = (u64)reg[i] + add[i] + carry; + carry = tmp >> 32; + reg[i] = (u32)tmp; + } + + return !carry; +} + +/* It is assumed that if the first byte of reg fits in a + * range, then the whole reg block fits. + */ +static int compare_reg(u32 *reg, u32 *range, u32 *rangesize) +{ + int i; + u32 end; + + for (i = 0; i < MAX_ADDR_CELLS; i++) { + if (reg[i] < range[i]) + return 0; + if (reg[i] > range[i]) + break; + } + + for (i = 0; i < MAX_ADDR_CELLS; i++) { + end = range[i] + rangesize[i]; + + if (reg[i] < end) + break; + if (reg[i] > end) + return 0; + } + + return reg[i] != end; +} + +/* reg must be MAX_ADDR_CELLS */ +static int find_range(u32 *reg, u32 *ranges, int nregaddr, + int naddr, int nsize, int buflen) +{ + int nrange = nregaddr + naddr + nsize; + int i; + + for (i = 0; i + nrange <= buflen; i += nrange) { + u32 range_addr[MAX_ADDR_CELLS]; + u32 range_size[MAX_ADDR_CELLS]; + + copy_val(range_addr, ranges + i, naddr); + copy_val(range_size, ranges + i + nregaddr + naddr, nsize); + + if (compare_reg(reg, range_addr, range_size)) + return i; + } + + return -1; +} + +/* Currently only generic buses without special encodings are supported. + * In particular, PCI is not supported. Also, only the beginning of the + * reg block is tracked; size is ignored except in ranges. + */ +static u32 dt_xlate_buf[MAX_ADDR_CELLS * MAX_RANGES * 3]; + +static int dt_xlate(void *node, int res, int reglen, unsigned long *addr, + unsigned long *size) +{ + u32 last_addr[MAX_ADDR_CELLS]; + u32 this_addr[MAX_ADDR_CELLS]; + void *parent; + u64 ret_addr, ret_size; + u32 naddr, nsize, prev_naddr; + int buflen, offset; + + parent = get_parent(node); + if (!parent) + return 0; + + get_reg_format(parent, &naddr, &nsize); + + if (nsize > 2) + return 0; + + offset = (naddr + nsize) * res; + + if (reglen < offset + naddr + nsize || + sizeof(dt_xlate_buf) < offset + naddr + nsize) + return 0; + + copy_val(last_addr, dt_xlate_buf + offset, naddr); + + ret_size = dt_xlate_buf[offset + naddr]; + if (nsize == 2) { + ret_size <<= 32; + ret_size |= dt_xlate_buf[offset + naddr + 1]; + } + + while ((node = get_parent(node))) { + prev_naddr = naddr; + + get_reg_format(node, &naddr, &nsize); + + buflen = getprop(node, "ranges", dt_xlate_buf, + sizeof(dt_xlate_buf)); + if (buflen < 0) + continue; + if (buflen > sizeof(dt_xlate_buf)) + return 0; + + offset = find_range(last_addr, dt_xlate_buf, prev_naddr, + naddr, nsize, buflen / 4); + + if (offset < 0) + return 0; + + copy_val(this_addr, dt_xlate_buf + offset, prev_naddr); + + if (!sub_reg(last_addr, this_addr)) + return 0; + + copy_val(this_addr, dt_xlate_buf + offset + prev_naddr, naddr); + + if (!add_reg(last_addr, this_addr, naddr)) + return 0; + } + + if (naddr > 2) + return 0; + + ret_addr = ((u64)last_addr[2] << 32) | last_addr[3]; + + if (sizeof(void *) == 4 && + (ret_addr >= 0x100000000ULL || ret_size > 0x100000000ULL || + ret_addr + ret_size > 0x100000000ULL)) + return 0; + + *addr = ret_addr; + if (size) + *size = ret_size; + + return 1; +} + +int dt_xlate_reg(void *node, int res, unsigned long *addr, unsigned long *size) +{ + int reglen; + + reglen = getprop(node, "reg", dt_xlate_buf, sizeof(dt_xlate_buf)) / 4; + return dt_xlate(node, res, reglen, addr, size); +} + +int dt_xlate_addr(void *node, u32 *buf, int buflen, unsigned long *xlated_addr) +{ + + if (buflen > sizeof(dt_xlate_buf)) + return 0; + + memcpy(dt_xlate_buf, buf, buflen); + return dt_xlate(node, 0, buflen / 4, xlated_addr, NULL); +} diff --git a/arch/powerpc/boot/dts/kuroboxHD.dts b/arch/powerpc/boot/dts/kuroboxHD.dts index b89791802e86..157dc98d3988 100644 --- a/arch/powerpc/boot/dts/kuroboxHD.dts +++ b/arch/powerpc/boot/dts/kuroboxHD.dts @@ -29,7 +29,6 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHD.dtb -V 16 kuroboxHD.dts" cpus { linux,phandle = <2000>; - #cpus = <1>; #address-cells = <1>; #size-cells = <0>; @@ -126,17 +125,17 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHD.dtb -V 16 kuroboxHD.dts" interrupt-parent = <4400>; interrupt-map-mask = <f800 0 0 7>; interrupt-map = < - /* IDSEL 0x11 - IRQ0 ETH */ + /* IDSEL 11 - IRQ0 ETH */ 5800 0 0 1 4400 0 1 5800 0 0 2 4400 1 1 5800 0 0 3 4400 2 1 5800 0 0 4 4400 3 1 - /* IDSEL 0x12 - IRQ1 IDE0 */ + /* IDSEL 12 - IRQ1 IDE0 */ 6000 0 0 1 4400 1 1 6000 0 0 2 4400 2 1 6000 0 0 3 4400 3 1 6000 0 0 4 4400 0 1 - /* IDSEL 0x14 - IRQ3 USB2.0 */ + /* IDSEL 14 - IRQ3 USB2.0 */ 7000 0 0 1 4400 3 1 7000 0 0 2 4400 3 1 7000 0 0 3 4400 3 1 diff --git a/arch/powerpc/boot/dts/kuroboxHG.dts b/arch/powerpc/boot/dts/kuroboxHG.dts index 753102752d8b..919eb29097db 100644 --- a/arch/powerpc/boot/dts/kuroboxHG.dts +++ b/arch/powerpc/boot/dts/kuroboxHG.dts @@ -29,7 +29,6 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHG.dtb -V 16 kuroboxHG.dts" cpus { linux,phandle = <2000>; - #cpus = <1>; #address-cells = <1>; #size-cells = <0>; @@ -126,17 +125,17 @@ build with: "dtc -f -I dts -O dtb -o kuroboxHG.dtb -V 16 kuroboxHG.dts" interrupt-parent = <4400>; interrupt-map-mask = <f800 0 0 7>; interrupt-map = < - /* IDSEL 0x11 - IRQ0 ETH */ + /* IDSEL 11 - IRQ0 ETH */ 5800 0 0 1 4400 0 1 5800 0 0 2 4400 1 1 5800 0 0 3 4400 2 1 5800 0 0 4 4400 3 1 - /* IDSEL 0x12 - IRQ1 IDE0 */ + /* IDSEL 12 - IRQ1 IDE0 */ 6000 0 0 1 4400 1 1 6000 0 0 2 4400 2 1 6000 0 0 3 4400 3 1 6000 0 0 4 4400 0 1 - /* IDSEL 0x14 - IRQ3 USB2.0 */ + /* IDSEL 14 - IRQ3 USB2.0 */ 7000 0 0 1 4400 3 1 7000 0 0 2 4400 3 1 7000 0 0 3 4400 3 1 diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts index c03103c63285..ba54c6b40a09 100644 --- a/arch/powerpc/boot/dts/lite5200.dts +++ b/arch/powerpc/boot/dts/lite5200.dts @@ -24,7 +24,6 @@ #size-cells = <1>; cpus { - #cpus = <1>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts index 3875ca9a9a62..2e003081b0d3 100644 --- a/arch/powerpc/boot/dts/lite5200b.dts +++ b/arch/powerpc/boot/dts/lite5200b.dts @@ -24,7 +24,6 @@ #size-cells = <1>; cpus { - #cpus = <1>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/powerpc/boot/dts/mpc7448hpc2.dts b/arch/powerpc/boot/dts/mpc7448hpc2.dts index 41d0720c5900..6fa3754f293a 100644 --- a/arch/powerpc/boot/dts/mpc7448hpc2.dts +++ b/arch/powerpc/boot/dts/mpc7448hpc2.dts @@ -19,7 +19,6 @@ linux,phandle = <100>; cpus { - #cpus = <1>; #address-cells = <1>; #size-cells =<0>; linux,phandle = <200>; diff --git a/arch/powerpc/boot/dts/mpc8272ads.dts b/arch/powerpc/boot/dts/mpc8272ads.dts index 260b2e447779..423eedcf634f 100644 --- a/arch/powerpc/boot/dts/mpc8272ads.dts +++ b/arch/powerpc/boot/dts/mpc8272ads.dts @@ -17,7 +17,6 @@ linux,phandle = <100>; cpus { - #cpus = <1>; #address-cells = <1>; #size-cells = <0>; linux,phandle = <200>; diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts index 6d721900d00e..a1533cc07d09 100644 --- a/arch/powerpc/boot/dts/mpc8313erdb.dts +++ b/arch/powerpc/boot/dts/mpc8313erdb.dts @@ -16,7 +16,6 @@ #size-cells = <1>; cpus { - #cpus = <1>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts index 06b310698a02..c798491f4cd0 100644 --- a/arch/powerpc/boot/dts/mpc832x_mds.dts +++ b/arch/powerpc/boot/dts/mpc832x_mds.dts @@ -16,7 +16,6 @@ #size-cells = <1>; cpus { - #cpus = <1>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/powerpc/boot/dts/mpc832x_rdb.dts b/arch/powerpc/boot/dts/mpc832x_rdb.dts new file mode 100644 index 000000000000..b55bced1593d --- /dev/null +++ b/arch/powerpc/boot/dts/mpc832x_rdb.dts @@ -0,0 +1,291 @@ +/* + * MPC832x RDB Device Tree Source + * + * Copyright 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/ { + model = "MPC8323ERDB"; + compatible = "MPC8323ERDB", "MPC832xRDB", "MPC83xxRDB"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8323@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <4000>; // L1, 16K + i-cache-size = <4000>; // L1, 16K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + 32-bit; + }; + }; + + memory { + device_type = "memory"; + reg = <00000000 04000000>; + }; + + soc8323@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = <e0000000 00000200>; + bus-frequency = <0>; + + wdt@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <200 100>; + }; + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = <e 8>; + interrupt-parent = <&pic>; + dfsrr; + }; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; + clock-frequency = <0>; + interrupts = <9 8>; + interrupt-parent = <&pic>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; + clock-frequency = <0>; + interrupts = <a 8>; + interrupt-parent = <&pic>; + }; + + crypto@30000 { + device_type = "crypto"; + model = "SEC2"; + compatible = "talitos"; + reg = <30000 7000>; + interrupts = <b 8>; + interrupt-parent = <&pic>; + /* Rev. 2.2 */ + num-channels = <1>; + channel-fifo-len = <18>; + exec-units-mask = <0000004c>; + descriptor-types-mask = <0122003f>; + }; + + pci@8500 { + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + /* IDSEL 0x10 AD16 (USB) */ + 8000 0 0 1 &pic 11 8 + + /* IDSEL 0x11 AD17 (Mini1)*/ + 8800 0 0 1 &pic 12 8 + 8800 0 0 2 &pic 13 8 + 8800 0 0 3 &pic 14 8 + 8800 0 0 4 &pic 30 8 + + /* IDSEL 0x12 AD18 (PCI/Mini2) */ + 9000 0 0 1 &pic 13 8 + 9000 0 0 2 &pic 14 8 + 9000 0 0 3 &pic 30 8 + 9000 0 0 4 &pic 11 8>; + + interrupt-parent = <&pic>; + interrupts = <42 8>; + bus-range = <0 0>; + ranges = <42000000 0 80000000 80000000 0 10000000 + 02000000 0 90000000 90000000 0 10000000 + 01000000 0 d0000000 d0000000 0 04000000>; + clock-frequency = <0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <8500 100>; + compatible = "83xx"; + device_type = "pci"; + }; + + pic:pic@700 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <700 100>; + built-in; + device_type = "ipic"; + }; + + par_io@1400 { + reg = <1400 100>; + device_type = "par_io"; + num-ports = <7>; + + ucc2pio:ucc_pin@02 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 3 4 3 0 2 0 /* MDIO */ + 3 5 1 0 2 0 /* MDC */ + 3 15 2 0 1 0 /* RX_CLK (CLK16) */ + 3 17 2 0 1 0 /* TX_CLK (CLK3) */ + 0 12 1 0 1 0 /* TxD0 */ + 0 13 1 0 1 0 /* TxD1 */ + 0 14 1 0 1 0 /* TxD2 */ + 0 15 1 0 1 0 /* TxD3 */ + 0 16 2 0 1 0 /* RxD0 */ + 0 17 2 0 1 0 /* RxD1 */ + 0 18 2 0 1 0 /* RxD2 */ + 0 19 2 0 1 0 /* RxD3 */ + 0 1a 2 0 1 0 /* RX_ER */ + 0 1b 1 0 1 0 /* TX_ER */ + 0 1c 2 0 1 0 /* RX_DV */ + 0 1d 2 0 1 0 /* COL */ + 0 1e 1 0 1 0 /* TX_EN */ + 0 1f 2 0 1 0>; /* CRS */ + }; + ucc3pio:ucc_pin@03 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0 d 2 0 1 0 /* RX_CLK (CLK9) */ + 3 18 2 0 1 0 /* TX_CLK (CLK10) */ + 1 0 1 0 1 0 /* TxD0 */ + 1 1 1 0 1 0 /* TxD1 */ + 1 2 1 0 1 0 /* TxD2 */ + 1 3 1 0 1 0 /* TxD3 */ + 1 4 2 0 1 0 /* RxD0 */ + 1 5 2 0 1 0 /* RxD1 */ + 1 6 2 0 1 0 /* RxD2 */ + 1 7 2 0 1 0 /* RxD3 */ + 1 8 2 0 1 0 /* RX_ER */ + 1 9 1 0 1 0 /* TX_ER */ + 1 a 2 0 1 0 /* RX_DV */ + 1 b 2 0 1 0 /* COL */ + 1 c 1 0 1 0 /* TX_EN */ + 1 d 2 0 1 0>; /* CRS */ + }; + }; + }; + + qe@e0100000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "qe"; + model = "QE"; + ranges = <0 e0100000 00100000>; + reg = <e0100000 480>; + brg-frequency = <0>; + bus-frequency = <BCD3D80>; + + muram@10000 { + device_type = "muram"; + ranges = <0 00010000 00004000>; + + data-only@0 { + reg = <0 4000>; + }; + }; + + spi@4c0 { + device_type = "spi"; + compatible = "fsl_spi"; + reg = <4c0 40>; + interrupts = <2>; + interrupt-parent = <&qeic>; + mode = "cpu"; + }; + + spi@500 { + device_type = "spi"; + compatible = "fsl_spi"; + reg = <500 40>; + interrupts = <1>; + interrupt-parent = <&qeic>; + mode = "cpu"; + }; + + ucc@3000 { + device_type = "network"; + compatible = "ucc_geth"; + model = "UCC"; + device-id = <2>; + reg = <3000 200>; + interrupts = <21>; + interrupt-parent = <&qeic>; + mac-address = [ 00 04 9f ef 03 02 ]; + rx-clock = <20>; + tx-clock = <13>; + phy-handle = <&phy00>; + pio-handle = <&ucc2pio>; + }; + + ucc@2200 { + device_type = "network"; + compatible = "ucc_geth"; + model = "UCC"; + device-id = <3>; + reg = <2200 200>; + interrupts = <22>; + interrupt-parent = <&qeic>; + mac-address = [ 00 04 9f ef 03 01 ]; + rx-clock = <19>; + tx-clock = <1a>; + phy-handle = <&phy04>; + pio-handle = <&ucc3pio>; + }; + + mdio@3120 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3120 18>; + device_type = "mdio"; + compatible = "ucc_geth_phy"; + + phy00:ethernet-phy@00 { + interrupt-parent = <&pic>; + interrupts = <0>; + reg = <0>; + device_type = "ethernet-phy"; + interface = <3>; //ENET_100_MII + }; + phy04:ethernet-phy@04 { + interrupt-parent = <&pic>; + interrupts = <0>; + reg = <4>; + device_type = "ethernet-phy"; + interface = <3>; + }; + }; + + qeic:qeic@80 { + interrupt-controller; + device_type = "qeic"; + #address-cells = <0>; + #interrupt-cells = <1>; + reg = <80 80>; + built-in; + big-endian; + interrupts = <20 8 21 8>; //high:32 low:33 + interrupt-parent = <&pic>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts index 61b550bf1645..db0d00303275 100644 --- a/arch/powerpc/boot/dts/mpc8349emitx.dts +++ b/arch/powerpc/boot/dts/mpc8349emitx.dts @@ -15,7 +15,6 @@ #size-cells = <1>; cpus { - #cpus = <1>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts index b2e1a5ec3779..f636528a3c72 100644 --- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts +++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts @@ -15,7 +15,6 @@ #size-cells = <1>; cpus { - #cpus = <1>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts index e4b43c24bc0b..07bcc5194d2b 100644 --- a/arch/powerpc/boot/dts/mpc834x_mds.dts +++ b/arch/powerpc/boot/dts/mpc834x_mds.dts @@ -16,7 +16,6 @@ #size-cells = <1>; cpus { - #cpus = <1>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts index 4fe45c021848..7f578eb57082 100644 --- a/arch/powerpc/boot/dts/mpc836x_mds.dts +++ b/arch/powerpc/boot/dts/mpc836x_mds.dts @@ -21,7 +21,6 @@ #size-cells = <1>; cpus { - #cpus = <1>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts index 3c0917fa791c..f261d647ac85 100644 --- a/arch/powerpc/boot/dts/mpc8540ads.dts +++ b/arch/powerpc/boot/dts/mpc8540ads.dts @@ -17,7 +17,6 @@ #size-cells = <1>; cpus { - #cpus = <1>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts index 2a1ae760ab3a..5fdcb69554f2 100644 --- a/arch/powerpc/boot/dts/mpc8541cds.dts +++ b/arch/powerpc/boot/dts/mpc8541cds.dts @@ -17,7 +17,6 @@ #size-cells = <1>; cpus { - #cpus = <1>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts new file mode 100644 index 000000000000..6b084605bb4b --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8544ds.dts @@ -0,0 +1,136 @@ +/* + * MPC8544 DS Device Tree Source + * + * Copyright 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/ { + model = "MPC8544DS"; + compatible = "MPC8544DS", "MPC85xxDS"; + #address-cells = <1>; + #size-cells = <1>; + + cpus { + #cpus = <1>; + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8544@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <20>; // 32 bytes + i-cache-line-size = <20>; // 32 bytes + d-cache-size = <8000>; // L1, 32K + i-cache-size = <8000>; // L1, 32K + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + 32-bit; + }; + }; + + memory { + device_type = "memory"; + reg = <00000000 00000000>; // Filled by U-Boot + }; + + soc8544@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + #interrupt-cells = <2>; + device_type = "soc"; + ranges = <0 e0000000 00100000>; + reg = <e0000000 00100000>; // CCSRBAR 1M + bus-frequency = <0>; // Filled out by uboot. + + i2c@3000 { + device_type = "i2c"; + compatible = "fsl-i2c"; + reg = <3000 100>; + interrupts = <1b 2>; + interrupt-parent = <&mpic>; + dfsrr; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "mdio"; + compatible = "gianfar"; + reg = <24520 20>; + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <3a 1>; + reg = <0>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <3a 1>; + reg = <1>; + device_type = "ethernet-phy"; + }; + }; + + ethernet@24000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <24000 1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <d 2 e 2 12 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy0>; + }; + + ethernet@26000 { + #address-cells = <1>; + #size-cells = <0>; + device_type = "network"; + model = "TSEC"; + compatible = "gianfar"; + reg = <26000 1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <f 2 10 2 11 2>; + interrupt-parent = <&mpic>; + phy-handle = <&phy1>; + }; + + serial@4500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4500 100>; + clock-frequency = <0>; + interrupts = <1a 2>; + interrupt-parent = <&mpic>; + }; + + serial@4600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <4600 100>; + clock-frequency = <0>; + interrupts = <1a 2>; + interrupt-parent = <&mpic>; + }; + + mpic: pic@40000 { + clock-frequency = <0>; + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <40000 40000>; + built-in; + compatible = "chrp,open-pic"; + device_type = "open-pic"; + big-endian; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts index 7eb5d81d5eec..b2b2200d0425 100644 --- a/arch/powerpc/boot/dts/mpc8548cds.dts +++ b/arch/powerpc/boot/dts/mpc8548cds.dts @@ -17,7 +17,6 @@ #size-cells = <1>; cpus { - #cpus = <1>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts index 5f9c102a0ab4..68a4795720dc 100644 --- a/arch/powerpc/boot/dts/mpc8555cds.dts +++ b/arch/powerpc/boot/dts/mpc8555cds.dts @@ -17,7 +17,6 @@ #size-cells = <1>; cpus { - #cpus = <1>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts index 10502638b0e9..1f2afe9291d2 100644 --- a/arch/powerpc/boot/dts/mpc8560ads.dts +++ b/arch/powerpc/boot/dts/mpc8560ads.dts @@ -17,7 +17,6 @@ #size-cells = <1>; cpus { - #cpus = <1>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts index bf49d8c997b9..7361b36749cb 100644 --- a/arch/powerpc/boot/dts/mpc8568mds.dts +++ b/arch/powerpc/boot/dts/mpc8568mds.dts @@ -21,7 +21,6 @@ #size-cells = <1>; cpus { - #cpus = <1>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts index 8a4995a85ba0..260b264c869e 100644 --- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts +++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts @@ -17,7 +17,6 @@ #size-cells = <1>; cpus { - #cpus = <2>; #address-cells = <1>; #size-cells = <0>; @@ -300,6 +299,30 @@ }; }; + + pci@9000 { + compatible = "86xx"; + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <9000 1000>; + bus-range = <0 ff>; + ranges = <02000000 0 a0000000 a0000000 0 20000000 + 01000000 0 00000000 e3000000 0 00100000>; + clock-frequency = <1fca055>; + interrupt-parent = <&mpic>; + interrupts = <19 2>; + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0 */ + 0000 0 0 1 &mpic 44 1 + 0000 0 0 2 &mpic 45 1 + 0000 0 0 3 &mpic 46 1 + 0000 0 0 4 &mpic 47 1 + >; + }; + mpic: pic@40000 { clock-frequency = <0>; interrupt-controller; diff --git a/arch/powerpc/boot/dts/mpc866ads.dts b/arch/powerpc/boot/dts/mpc866ads.dts index 2b56b5df451a..c0d06fd12927 100644 --- a/arch/powerpc/boot/dts/mpc866ads.dts +++ b/arch/powerpc/boot/dts/mpc866ads.dts @@ -18,7 +18,6 @@ linux,phandle = <100>; cpus { - #cpus = <1>; #address-cells = <1>; #size-cells = <0>; linux,phandle = <200>; diff --git a/arch/powerpc/boot/dts/mpc885ads.dts b/arch/powerpc/boot/dts/mpc885ads.dts index faecd08c54da..110bf6170603 100644 --- a/arch/powerpc/boot/dts/mpc885ads.dts +++ b/arch/powerpc/boot/dts/mpc885ads.dts @@ -18,7 +18,6 @@ linux,phandle = <100>; cpus { - #cpus = <1>; #address-cells = <1>; #size-cells = <0>; linux,phandle = <200>; diff --git a/arch/powerpc/boot/elf.h b/arch/powerpc/boot/elf.h index d4828fcf1cb9..1941bc50d4c5 100644 --- a/arch/powerpc/boot/elf.h +++ b/arch/powerpc/boot/elf.h @@ -146,4 +146,12 @@ typedef struct elf64_phdr { #define ELFOSABI_NONE 0 #define ELFOSABI_LINUX 3 +struct elf_info { + unsigned long loadsize; + unsigned long memsize; + unsigned long elfoffset; +}; +int parse_elf64(void *hdr, struct elf_info *info); +int parse_elf32(void *hdr, struct elf_info *info); + #endif /* _PPC_BOOT_ELF_H_ */ diff --git a/arch/powerpc/boot/elf_util.c b/arch/powerpc/boot/elf_util.c new file mode 100644 index 000000000000..7454aa4cc20c --- /dev/null +++ b/arch/powerpc/boot/elf_util.c @@ -0,0 +1,76 @@ +/* + * Copyright (C) Paul Mackerras 1997. + * + * Updates for PPC64 by Todd Inglett, Dave Engebretsen & Peter Bergner. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ +#include <stdarg.h> +#include <stddef.h> +#include "elf.h" +#include "page.h" +#include "string.h" +#include "stdio.h" + +int parse_elf64(void *hdr, struct elf_info *info) +{ + Elf64_Ehdr *elf64 = hdr; + Elf64_Phdr *elf64ph; + unsigned int i; + + if (!(elf64->e_ident[EI_MAG0] == ELFMAG0 && + elf64->e_ident[EI_MAG1] == ELFMAG1 && + elf64->e_ident[EI_MAG2] == ELFMAG2 && + elf64->e_ident[EI_MAG3] == ELFMAG3 && + elf64->e_ident[EI_CLASS] == ELFCLASS64 && + elf64->e_ident[EI_DATA] == ELFDATA2MSB && + elf64->e_type == ET_EXEC && + elf64->e_machine == EM_PPC64)) + return 0; + + elf64ph = (Elf64_Phdr *)((unsigned long)elf64 + + (unsigned long)elf64->e_phoff); + for (i = 0; i < (unsigned int)elf64->e_phnum; i++, elf64ph++) + if (elf64ph->p_type == PT_LOAD) + break; + if (i >= (unsigned int)elf64->e_phnum) + return 0; + + info->loadsize = (unsigned long)elf64ph->p_filesz; + info->memsize = (unsigned long)elf64ph->p_memsz; + info->elfoffset = (unsigned long)elf64ph->p_offset; + + return 1; +} + +int parse_elf32(void *hdr, struct elf_info *info) +{ + Elf32_Ehdr *elf32 = hdr; + Elf32_Phdr *elf32ph; + unsigned int i; + + if (!(elf32->e_ident[EI_MAG0] == ELFMAG0 && + elf32->e_ident[EI_MAG1] == ELFMAG1 && + elf32->e_ident[EI_MAG2] == ELFMAG2 && + elf32->e_ident[EI_MAG3] == ELFMAG3 && + elf32->e_ident[EI_CLASS] == ELFCLASS32 && + elf32->e_ident[EI_DATA] == ELFDATA2MSB && + elf32->e_type == ET_EXEC && + elf32->e_machine == EM_PPC)) + return 0; + + elf32ph = (Elf32_Phdr *) ((unsigned long)elf32 + elf32->e_phoff); + for (i = 0; i < elf32->e_phnum; i++, elf32ph++) + if (elf32ph->p_type == PT_LOAD) + break; + if (i >= elf32->e_phnum) + return 0; + + info->loadsize = elf32ph->p_filesz; + info->memsize = elf32ph->p_memsz; + info->elfoffset = elf32ph->p_offset; + return 1; +} diff --git a/arch/powerpc/boot/flatdevtree.c b/arch/powerpc/boot/flatdevtree.c index c76c194715b2..d00fbd92a458 100644 --- a/arch/powerpc/boot/flatdevtree.c +++ b/arch/powerpc/boot/flatdevtree.c @@ -29,12 +29,20 @@ #define _ALIGN(x, al) (((x) + (al) - 1) & ~((al) - 1)) +static char *ft_root_node(struct ft_cxt *cxt) +{ + return cxt->rgn[FT_STRUCT].start; +} + /* Routines for keeping node ptrs returned by ft_find_device current */ /* First entry not used b/c it would return 0 and be taken as NULL/error */ -static void *ft_node_add(struct ft_cxt *cxt, char *node) +static void *ft_get_phandle(struct ft_cxt *cxt, char *node) { unsigned int i; + if (!node) + return NULL; + for (i = 1; i < cxt->nodes_used; i++) /* already there? */ if (cxt->node_tbl[i] == node) return (void *)i; @@ -238,7 +246,7 @@ static int ft_shuffle(struct ft_cxt *cxt, char **pp, enum ft_rgn_id rgn, if (rgn == FT_STRUCT) ft_node_update_before(cxt, p, -nextra); } - *p -= nextra; + *pp -= nextra; cxt->rgn[rgn].start -= nextra; cxt->rgn[rgn].size += nextra; return 1; @@ -253,8 +261,14 @@ static int ft_make_space(struct ft_cxt *cxt, char **pp, enum ft_rgn_id rgn, char *str, *next; enum ft_rgn_id r; - if (!cxt->isordered && !ft_reorder(cxt, nextra)) - return 0; + if (!cxt->isordered) { + unsigned long rgn_off = *pp - cxt->rgn[rgn].start; + + if (!ft_reorder(cxt, nextra)) + return 0; + + *pp = cxt->rgn[rgn].start + rgn_off; + } if (ft_shuffle(cxt, pp, rgn, nextra)) return 1; @@ -415,7 +429,7 @@ int ft_prop(struct ft_cxt *cxt, const char *name, const void *data, { int off, len; - off = lookup_string(cxt, name); + off = map_string(cxt, name); if (off == NO_STRING) return -1; @@ -590,7 +604,7 @@ int ft_add_rsvmap(struct ft_cxt *cxt, u64 physaddr, u64 size) void ft_begin_tree(struct ft_cxt *cxt) { - cxt->p = cxt->rgn[FT_STRUCT].start; + cxt->p = ft_root_node(cxt); } void ft_end_tree(struct ft_cxt *cxt) @@ -636,8 +650,21 @@ void *ft_find_device(struct ft_cxt *cxt, const char *srch_path) /* require absolute path */ if (srch_path[0] != '/') return NULL; - node = ft_find_descendent(cxt, cxt->rgn[FT_STRUCT].start, srch_path); - return ft_node_add(cxt, node); + node = ft_find_descendent(cxt, ft_root_node(cxt), srch_path); + return ft_get_phandle(cxt, node); +} + +void *ft_find_device_rel(struct ft_cxt *cxt, const void *top, + const char *srch_path) +{ + char *node; + + node = ft_node_ph2node(cxt, top); + if (node == NULL) + return NULL; + + node = ft_find_descendent(cxt, node, srch_path); + return ft_get_phandle(cxt, node); } void *ft_find_descendent(struct ft_cxt *cxt, void *top, const char *srch_path) @@ -701,23 +728,18 @@ void *ft_find_descendent(struct ft_cxt *cxt, void *top, const char *srch_path) return NULL; } -void *ft_get_parent(struct ft_cxt *cxt, const void *phandle) +void *__ft_get_parent(struct ft_cxt *cxt, void *node) { - void *node; int d; struct ft_atom atom; char *p; - node = ft_node_ph2node(cxt, phandle); - if (node == NULL) - return NULL; - for (d = 0; cxt->genealogy[d] != NULL; ++d) if (cxt->genealogy[d] == node) - return cxt->genealogy[d > 0 ? d - 1 : 0]; + return d > 0 ? cxt->genealogy[d - 1] : NULL; /* have to do it the hard way... */ - p = cxt->rgn[FT_STRUCT].start; + p = ft_root_node(cxt); d = 0; while ((p = ft_next(cxt, p, &atom)) != NULL) { switch (atom.tag) { @@ -726,7 +748,7 @@ void *ft_get_parent(struct ft_cxt *cxt, const void *phandle) if (node == atom.data) { /* found it */ cxt->genealogy[d + 1] = NULL; - return d > 0 ? cxt->genealogy[d - 1] : node; + return d > 0 ? cxt->genealogy[d - 1] : NULL; } ++d; break; @@ -738,41 +760,131 @@ void *ft_get_parent(struct ft_cxt *cxt, const void *phandle) return NULL; } -int ft_get_prop(struct ft_cxt *cxt, const void *phandle, const char *propname, - void *buf, const unsigned int buflen) +void *ft_get_parent(struct ft_cxt *cxt, const void *phandle) { - struct ft_atom atom; - void *node; - char *p; - int depth; - unsigned int size; - - node = ft_node_ph2node(cxt, phandle); + void *node = ft_node_ph2node(cxt, phandle); if (node == NULL) - return -1; + return NULL; - depth = 0; - p = (char *)node; + node = __ft_get_parent(cxt, node); + return ft_get_phandle(cxt, node); +} - while ((p = ft_next(cxt, p, &atom)) != NULL) { +static const void *__ft_get_prop(struct ft_cxt *cxt, void *node, + const char *propname, unsigned int *len) +{ + struct ft_atom atom; + int depth = 0; + + while ((node = ft_next(cxt, node, &atom)) != NULL) { switch (atom.tag) { case OF_DT_BEGIN_NODE: ++depth; break; + case OF_DT_PROP: - if ((depth != 1) || strcmp(atom.name, propname)) + if (depth != 1 || strcmp(atom.name, propname)) break; - size = min(atom.size, buflen); - memcpy(buf, atom.data, size); - return atom.size; + + if (len) + *len = atom.size; + + return atom.data; + case OF_DT_END_NODE: if (--depth <= 0) - return -1; + return NULL; } } + + return NULL; +} + +int ft_get_prop(struct ft_cxt *cxt, const void *phandle, const char *propname, + void *buf, const unsigned int buflen) +{ + const void *data; + unsigned int size; + + void *node = ft_node_ph2node(cxt, phandle); + if (!node) + return -1; + + data = __ft_get_prop(cxt, node, propname, &size); + if (data) { + unsigned int clipped_size = min(size, buflen); + memcpy(buf, data, clipped_size); + return size; + } + return -1; } +void *__ft_find_node_by_prop_value(struct ft_cxt *cxt, void *prev, + const char *propname, const char *propval, + unsigned int proplen) +{ + struct ft_atom atom; + char *p = ft_root_node(cxt); + char *next; + int past_prev = prev ? 0 : 1; + int depth = -1; + + while ((next = ft_next(cxt, p, &atom)) != NULL) { + const void *data; + unsigned int size; + + switch (atom.tag) { + case OF_DT_BEGIN_NODE: + depth++; + + if (prev == p) { + past_prev = 1; + break; + } + + if (!past_prev || depth < 1) + break; + + data = __ft_get_prop(cxt, p, propname, &size); + if (!data || size != proplen) + break; + if (memcmp(data, propval, size)) + break; + + return p; + + case OF_DT_END_NODE: + if (depth-- == 0) + return NULL; + + break; + } + + p = next; + } + + return NULL; +} + +void *ft_find_node_by_prop_value(struct ft_cxt *cxt, const void *prev, + const char *propname, const char *propval, + int proplen) +{ + void *node = NULL; + + if (prev) { + node = ft_node_ph2node(cxt, prev); + + if (!node) + return NULL; + } + + node = __ft_find_node_by_prop_value(cxt, node, propname, + propval, proplen); + return ft_get_phandle(cxt, node); +} + int ft_set_prop(struct ft_cxt *cxt, const void *phandle, const char *propname, const void *buf, const unsigned int buflen) { @@ -849,19 +961,26 @@ int ft_del_prop(struct ft_cxt *cxt, const void *phandle, const char *propname) return -1; } -void *ft_create_node(struct ft_cxt *cxt, const void *parent, const char *path) +void *ft_create_node(struct ft_cxt *cxt, const void *parent, const char *name) { struct ft_atom atom; char *p, *next; int depth = 0; - p = cxt->rgn[FT_STRUCT].start; + if (parent) { + p = ft_node_ph2node(cxt, parent); + if (!p) + return NULL; + } else { + p = ft_root_node(cxt); + } + while ((next = ft_next(cxt, p, &atom)) != NULL) { switch (atom.tag) { case OF_DT_BEGIN_NODE: ++depth; - if (depth == 1 && strcmp(atom.name, path) == 0) - /* duplicate node path, return error */ + if (depth == 1 && strcmp(atom.name, name) == 0) + /* duplicate node name, return error */ return NULL; break; case OF_DT_END_NODE: @@ -870,7 +989,7 @@ void *ft_create_node(struct ft_cxt *cxt, const void *parent, const char *path) break; /* end of node, insert here */ cxt->p = p; - ft_begin_node(cxt, path); + ft_begin_node(cxt, name); ft_end_node(cxt); return p; } diff --git a/arch/powerpc/boot/flatdevtree.h b/arch/powerpc/boot/flatdevtree.h index b9cd9f61f351..cb26325d72db 100644 --- a/arch/powerpc/boot/flatdevtree.h +++ b/arch/powerpc/boot/flatdevtree.h @@ -97,10 +97,17 @@ int ft_add_rsvmap(struct ft_cxt *cxt, u64 physaddr, u64 size); void ft_dump_blob(const void *bphp); void ft_merge_blob(struct ft_cxt *cxt, void *blob); void *ft_find_device(struct ft_cxt *cxt, const char *srch_path); +void *ft_find_device_rel(struct ft_cxt *cxt, const void *top, + const char *srch_path); void *ft_find_descendent(struct ft_cxt *cxt, void *top, const char *srch_path); int ft_get_prop(struct ft_cxt *cxt, const void *phandle, const char *propname, void *buf, const unsigned int buflen); int ft_set_prop(struct ft_cxt *cxt, const void *phandle, const char *propname, const void *buf, const unsigned int buflen); +void *ft_get_parent(struct ft_cxt *cxt, const void *phandle); +void *ft_find_node_by_prop_value(struct ft_cxt *cxt, const void *prev, + const char *propname, const char *propval, + int proplen); +void *ft_create_node(struct ft_cxt *cxt, const void *parent, const char *name); #endif /* FLATDEVTREE_H */ diff --git a/arch/powerpc/boot/flatdevtree_misc.c b/arch/powerpc/boot/flatdevtree_misc.c index 04da38fa477f..4341e6558c1a 100644 --- a/arch/powerpc/boot/flatdevtree_misc.c +++ b/arch/powerpc/boot/flatdevtree_misc.c @@ -16,24 +16,43 @@ static struct ft_cxt cxt; -static void *ft_finddevice(const char *name) +static void *fdtm_finddevice(const char *name) { return ft_find_device(&cxt, name); } -static int ft_getprop(const void *phandle, const char *propname, void *buf, - const int buflen) +static int fdtm_getprop(const void *phandle, const char *propname, + void *buf, const int buflen) { return ft_get_prop(&cxt, phandle, propname, buf, buflen); } -static int ft_setprop(const void *phandle, const char *propname, - const void *buf, const int buflen) +static int fdtm_setprop(const void *phandle, const char *propname, + const void *buf, const int buflen) { return ft_set_prop(&cxt, phandle, propname, buf, buflen); } -static unsigned long ft_finalize(void) +static void *fdtm_get_parent(const void *phandle) +{ + return ft_get_parent(&cxt, phandle); +} + +static void *fdtm_create_node(const void *phandle, const char *name) +{ + return ft_create_node(&cxt, phandle, name); +} + +static void *fdtm_find_node_by_prop_value(const void *prev, + const char *propname, + const char *propval, + int proplen) +{ + return ft_find_node_by_prop_value(&cxt, prev, propname, + propval, proplen); +} + +static unsigned long fdtm_finalize(void) { ft_end_tree(&cxt); return (unsigned long)cxt.bph; @@ -41,10 +60,13 @@ static unsigned long ft_finalize(void) int ft_init(void *dt_blob, unsigned int max_size, unsigned int max_find_device) { - dt_ops.finddevice = ft_finddevice; - dt_ops.getprop = ft_getprop; - dt_ops.setprop = ft_setprop; - dt_ops.finalize = ft_finalize; + dt_ops.finddevice = fdtm_finddevice; + dt_ops.getprop = fdtm_getprop; + dt_ops.setprop = fdtm_setprop; + dt_ops.get_parent = fdtm_get_parent; + dt_ops.create_node = fdtm_create_node; + dt_ops.find_node_by_prop_value = fdtm_find_node_by_prop_value; + dt_ops.finalize = fdtm_finalize; return ft_open(&cxt, dt_blob, max_size, max_find_device, platform_ops.realloc); diff --git a/arch/powerpc/boot/gunzip_util.c b/arch/powerpc/boot/gunzip_util.c new file mode 100644 index 000000000000..df8ab07e9ff4 --- /dev/null +++ b/arch/powerpc/boot/gunzip_util.c @@ -0,0 +1,206 @@ +/* + * Copyright 2007 David Gibson, IBM Corporation. + * Based on earlier work, Copyright (C) Paul Mackerras 1997. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <stddef.h> +#include "string.h" +#include "stdio.h" +#include "ops.h" +#include "gunzip_util.h" + +#define HEAD_CRC 2 +#define EXTRA_FIELD 4 +#define ORIG_NAME 8 +#define COMMENT 0x10 +#define RESERVED 0xe0 + +/** + * gunzip_start - prepare to decompress gzip data + * @state: decompressor state structure to be initialized + * @src: buffer containing gzip compressed or uncompressed data + * @srclen: size in bytes of the buffer at src + * + * If the buffer at @src contains a gzip header, this function + * initializes zlib to decompress the data, storing the decompression + * state in @state. The other functions in this file can then be used + * to decompress data from the gzipped stream. + * + * If the buffer at @src does not contain a gzip header, it is assumed + * to contain uncompressed data. The buffer information is recorded + * in @state and the other functions in this file will simply copy + * data from the uncompressed data stream at @src. + * + * Any errors, such as bad compressed data, cause an error to be + * printed an the platform's exit() function to be called. + */ +void gunzip_start(struct gunzip_state *state, void *src, int srclen) +{ + char *hdr = src; + int hdrlen = 0; + + memset(state, 0, sizeof(*state)); + + /* Check for gzip magic number */ + if ((hdr[0] == 0x1f) && (hdr[1] == 0x8b)) { + /* gzip data, initialize zlib parameters */ + int r, flags; + + state->s.workspace = state->scratch; + if (zlib_inflate_workspacesize() > sizeof(state->scratch)) + fatal("insufficient scratch space for gunzip\n\r"); + + /* skip header */ + hdrlen = 10; + flags = hdr[3]; + if (hdr[2] != Z_DEFLATED || (flags & RESERVED) != 0) + fatal("bad gzipped data\n\r"); + if ((flags & EXTRA_FIELD) != 0) + hdrlen = 12 + hdr[10] + (hdr[11] << 8); + if ((flags & ORIG_NAME) != 0) + while (hdr[hdrlen++] != 0) + ; + if ((flags & COMMENT) != 0) + while (hdr[hdrlen++] != 0) + ; + if ((flags & HEAD_CRC) != 0) + hdrlen += 2; + if (hdrlen >= srclen) + fatal("gunzip_start: ran out of data in header\n\r"); + + r = zlib_inflateInit2(&state->s, -MAX_WBITS); + if (r != Z_OK) + fatal("inflateInit2 returned %d\n\r", r); + } + + state->s.next_in = src + hdrlen; + state->s.avail_in = srclen - hdrlen; +} + +/** + * gunzip_partial - extract bytes from a gzip data stream + * @state: gzip state structure previously initialized by gunzip_start() + * @dst: buffer to store extracted data + * @dstlen: maximum number of bytes to extract + * + * This function extracts at most @dstlen bytes from the data stream + * previously associated with @state by gunzip_start(), decompressing + * if necessary. Exactly @dstlen bytes are extracted unless the data + * stream doesn't contain enough bytes, in which case the entire + * remainder of the stream is decompressed. + * + * Returns the actual number of bytes extracted. If any errors occur, + * such as a corrupted compressed stream, an error is printed an the + * platform's exit() function is called. + */ +int gunzip_partial(struct gunzip_state *state, void *dst, int dstlen) +{ + int len; + + if (state->s.workspace) { + /* gunzipping */ + int r; + + state->s.next_out = dst; + state->s.avail_out = dstlen; + r = zlib_inflate(&state->s, Z_FULL_FLUSH); + if (r != Z_OK && r != Z_STREAM_END) + fatal("inflate returned %d msg: %s\n\r", r, state->s.msg); + len = state->s.next_out - (unsigned char *)dst; + } else { + /* uncompressed image */ + len = min(state->s.avail_in, (unsigned)dstlen); + memcpy(dst, state->s.next_in, len); + state->s.next_in += len; + state->s.avail_in -= len; + } + return len; +} + +/** + * gunzip_exactly - extract a fixed number of bytes from a gzip data stream + * @state: gzip state structure previously initialized by gunzip_start() + * @dst: buffer to store extracted data + * @dstlen: number of bytes to extract + * + * This function extracts exactly @dstlen bytes from the data stream + * previously associated with @state by gunzip_start(), decompressing + * if necessary. + * + * If there are less @dstlen bytes available in the data stream, or if + * any other errors occur, such as a corrupted compressed stream, an + * error is printed an the platform's exit() function is called. + */ +void gunzip_exactly(struct gunzip_state *state, void *dst, int dstlen) +{ + int len; + + len = gunzip_partial(state, dst, dstlen); + if (len < dstlen) + fatal("\n\rgunzip_exactly: ran out of data!" + " Wanted %d, got %d.\n\r", dstlen, len); +} + +/** + * gunzip_discard - discard bytes from a gzip data stream + * @state: gzip state structure previously initialized by gunzip_start() + * @len: number of bytes to discard + * + * This function extracts, then discards exactly @len bytes from the + * data stream previously associated with @state by gunzip_start(). + * Subsequent gunzip_partial(), gunzip_exactly() or gunzip_finish() + * calls will extract the data following the discarded bytes in the + * data stream. + * + * If there are less @len bytes available in the data stream, or if + * any other errors occur, such as a corrupted compressed stream, an + * error is printed an the platform's exit() function is called. + */ +void gunzip_discard(struct gunzip_state *state, int len) +{ + static char discard_buf[128]; + + while (len > sizeof(discard_buf)) { + gunzip_exactly(state, discard_buf, sizeof(discard_buf)); + len -= sizeof(discard_buf); + } + + if (len > 0) + gunzip_exactly(state, discard_buf, len); +} + +/** + * gunzip_finish - extract all remaining bytes from a gzip data stream + * @state: gzip state structure previously initialized by gunzip_start() + * @dst: buffer to store extracted data + * @dstlen: maximum number of bytes to extract + * + * This function extracts all remaining data, or at most @dstlen + * bytes, from the stream previously associated with @state by + * gunzip_start(). zlib is then shut down, so it is an error to use + * any of the functions in this file on @state until it is + * re-initialized with another call to gunzip_start(). + * + * If any errors occur, such as a corrupted compressed stream, an + * error is printed an the platform's exit() function is called. + */ +int gunzip_finish(struct gunzip_state *state, void *dst, int dstlen) +{ + int len; + + if (state->s.workspace) { + len = gunzip_partial(state, dst, dstlen); + zlib_inflateEnd(&state->s); + } else { + /* uncompressed image */ + len = min(state->s.avail_in, (unsigned)dstlen); + memcpy(dst, state->s.next_in, len); + } + + return len; +} diff --git a/arch/powerpc/boot/gunzip_util.h b/arch/powerpc/boot/gunzip_util.h new file mode 100644 index 000000000000..b3dfa6e87b3a --- /dev/null +++ b/arch/powerpc/boot/gunzip_util.h @@ -0,0 +1,45 @@ +/* + * Decompression convenience functions + * + * Copyright 2007 David Gibson, IBM Corporation. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#ifndef _PPC_BOOT_GUNZIP_UTIL_H_ +#define _PPC_BOOT_GUNZIP_UTIL_H_ + +#include "zlib.h" + +/* + * These functions are designed to make life easy for decompressing + * kernel images, initrd images or any other gzip compressed image, + * particularly if its useful to decompress part of the image (e.g. to + * examine headers) before decompressing the remainder. + * + * To use: + * - declare a gunzip_state structure + * - use gunzip_start() to initialize the state, associating it + * with a stream of compressed data + * - use gunzip_partial(), gunzip_exactly() and gunzip_discard() + * in any combination to extract pieces of data from the stream + * - Finally use gunzip_finish() to extract the tail of the + * compressed stream and wind up zlib + */ + +/* scratch space for gunzip; 46912 is from zlib_inflate_workspacesize() */ +#define GUNZIP_SCRATCH_SIZE 46912 + +struct gunzip_state { + z_stream s; + char scratch[46912]; +}; + +void gunzip_start(struct gunzip_state *state, void *src, int srclen); +int gunzip_partial(struct gunzip_state *state, void *dst, int dstlen); +void gunzip_exactly(struct gunzip_state *state, void *dst, int len); +void gunzip_discard(struct gunzip_state *state, int len); +int gunzip_finish(struct gunzip_state *state, void *dst, int len); + +#endif /* _PPC_BOOT_GUNZIP_UTIL_H_ */ diff --git a/arch/powerpc/boot/main.c b/arch/powerpc/boot/main.c index 6f6b50d238b6..56b56a8d4b23 100644 --- a/arch/powerpc/boot/main.c +++ b/arch/powerpc/boot/main.c @@ -14,11 +14,10 @@ #include "page.h" #include "string.h" #include "stdio.h" -#include "zlib.h" #include "ops.h" +#include "gunzip_util.h" #include "flatdevtree.h" - -extern void flush_cache(void *, unsigned long); +#include "reg.h" extern char _start[]; extern char __bss_start[]; @@ -30,304 +29,173 @@ extern char _initrd_end[]; extern char _dtb_start[]; extern char _dtb_end[]; +static struct gunzip_state gzstate; + struct addr_range { - unsigned long addr; + void *addr; unsigned long size; - unsigned long memsize; }; -static struct addr_range vmlinux; -static struct addr_range vmlinuz; -static struct addr_range initrd; - -static unsigned long elfoffset; -static int is_64bit; - -/* scratch space for gunzip; 46912 is from zlib_inflate_workspacesize() */ -static char scratch[46912]; -static char elfheader[256]; typedef void (*kernel_entry_t)(unsigned long, unsigned long, void *); #undef DEBUG -#define HEAD_CRC 2 -#define EXTRA_FIELD 4 -#define ORIG_NAME 8 -#define COMMENT 0x10 -#define RESERVED 0xe0 - -static void gunzip(void *dst, int dstlen, unsigned char *src, int *lenp) +static struct addr_range prep_kernel(void) { - z_stream s; - int r, i, flags; - - /* skip header */ - i = 10; - flags = src[3]; - if (src[2] != Z_DEFLATED || (flags & RESERVED) != 0) { - printf("bad gzipped data\n\r"); - exit(); - } - if ((flags & EXTRA_FIELD) != 0) - i = 12 + src[10] + (src[11] << 8); - if ((flags & ORIG_NAME) != 0) - while (src[i++] != 0) - ; - if ((flags & COMMENT) != 0) - while (src[i++] != 0) - ; - if ((flags & HEAD_CRC) != 0) - i += 2; - if (i >= *lenp) { - printf("gunzip: ran out of data in header\n\r"); - exit(); - } + char elfheader[256]; + void *vmlinuz_addr = _vmlinux_start; + unsigned long vmlinuz_size = _vmlinux_end - _vmlinux_start; + void *addr = 0; + struct elf_info ei; + int len; - if (zlib_inflate_workspacesize() > sizeof(scratch)) { - printf("gunzip needs more mem\n"); - exit(); - } - memset(&s, 0, sizeof(s)); - s.workspace = scratch; - r = zlib_inflateInit2(&s, -MAX_WBITS); - if (r != Z_OK) { - printf("inflateInit2 returned %d\n\r", r); - exit(); - } - s.next_in = src + i; - s.avail_in = *lenp - i; - s.next_out = dst; - s.avail_out = dstlen; - r = zlib_inflate(&s, Z_FULL_FLUSH); - if (r != Z_OK && r != Z_STREAM_END) { - printf("inflate returned %d msg: %s\n\r", r, s.msg); - exit(); + /* gunzip the ELF header of the kernel */ + gunzip_start(&gzstate, vmlinuz_addr, vmlinuz_size); + gunzip_exactly(&gzstate, elfheader, sizeof(elfheader)); + + if (!parse_elf64(elfheader, &ei) && !parse_elf32(elfheader, &ei)) + fatal("Error: not a valid PPC32 or PPC64 ELF file!\n\r"); + + if (platform_ops.image_hdr) + platform_ops.image_hdr(elfheader); + + /* We need to alloc the memsize: gzip will expand the kernel + * text/data, then possible rubbish we don't care about. But + * the kernel bss must be claimed (it will be zero'd by the + * kernel itself) + */ + printf("Allocating 0x%lx bytes for kernel ...\n\r", ei.memsize); + + if (platform_ops.vmlinux_alloc) { + addr = platform_ops.vmlinux_alloc(ei.memsize); + } else { + if ((unsigned long)_start < ei.memsize) + fatal("Insufficient memory for kernel at address 0!" + " (_start=%p)\n\r", _start); } - *lenp = s.next_out - (unsigned char *) dst; - zlib_inflateEnd(&s); -} -static int is_elf64(void *hdr) -{ - Elf64_Ehdr *elf64 = hdr; - Elf64_Phdr *elf64ph; - unsigned int i; - - if (!(elf64->e_ident[EI_MAG0] == ELFMAG0 && - elf64->e_ident[EI_MAG1] == ELFMAG1 && - elf64->e_ident[EI_MAG2] == ELFMAG2 && - elf64->e_ident[EI_MAG3] == ELFMAG3 && - elf64->e_ident[EI_CLASS] == ELFCLASS64 && - elf64->e_ident[EI_DATA] == ELFDATA2MSB && - elf64->e_type == ET_EXEC && - elf64->e_machine == EM_PPC64)) - return 0; - - elf64ph = (Elf64_Phdr *)((unsigned long)elf64 + - (unsigned long)elf64->e_phoff); - for (i = 0; i < (unsigned int)elf64->e_phnum; i++, elf64ph++) - if (elf64ph->p_type == PT_LOAD) - break; - if (i >= (unsigned int)elf64->e_phnum) - return 0; - - elfoffset = (unsigned long)elf64ph->p_offset; - vmlinux.size = (unsigned long)elf64ph->p_filesz + elfoffset; - vmlinux.memsize = (unsigned long)elf64ph->p_memsz + elfoffset; - - is_64bit = 1; - return 1; -} + /* Finally, gunzip the kernel */ + printf("gunzipping (0x%p <- 0x%p:0x%p)...", addr, + vmlinuz_addr, vmlinuz_addr+vmlinuz_size); + /* discard up to the actual load data */ + gunzip_discard(&gzstate, ei.elfoffset - sizeof(elfheader)); + len = gunzip_finish(&gzstate, addr, ei.loadsize); + if (len != ei.loadsize) + fatal("ran out of data! only got 0x%x of 0x%lx bytes.\n\r", + len, ei.loadsize); + printf("done 0x%x bytes\n\r", len); -static int is_elf32(void *hdr) -{ - Elf32_Ehdr *elf32 = hdr; - Elf32_Phdr *elf32ph; - unsigned int i; - - if (!(elf32->e_ident[EI_MAG0] == ELFMAG0 && - elf32->e_ident[EI_MAG1] == ELFMAG1 && - elf32->e_ident[EI_MAG2] == ELFMAG2 && - elf32->e_ident[EI_MAG3] == ELFMAG3 && - elf32->e_ident[EI_CLASS] == ELFCLASS32 && - elf32->e_ident[EI_DATA] == ELFDATA2MSB && - elf32->e_type == ET_EXEC && - elf32->e_machine == EM_PPC)) - return 0; - - elf32 = (Elf32_Ehdr *)elfheader; - elf32ph = (Elf32_Phdr *) ((unsigned long)elf32 + elf32->e_phoff); - for (i = 0; i < elf32->e_phnum; i++, elf32ph++) - if (elf32ph->p_type == PT_LOAD) - break; - if (i >= elf32->e_phnum) - return 0; - - elfoffset = elf32ph->p_offset; - vmlinux.size = elf32ph->p_filesz + elf32ph->p_offset; - vmlinux.memsize = elf32ph->p_memsz + elf32ph->p_offset; - return 1; + flush_cache(addr, ei.loadsize); + + return (struct addr_range){addr, ei.memsize}; } -static void prep_kernel(unsigned long a1, unsigned long a2) +static struct addr_range prep_initrd(struct addr_range vmlinux, void *chosen, + unsigned long initrd_addr, + unsigned long initrd_size) { - int len; - - vmlinuz.addr = (unsigned long)_vmlinux_start; - vmlinuz.size = (unsigned long)(_vmlinux_end - _vmlinux_start); - - /* gunzip the ELF header of the kernel */ - if (*(unsigned short *)vmlinuz.addr == 0x1f8b) { - len = vmlinuz.size; - gunzip(elfheader, sizeof(elfheader), - (unsigned char *)vmlinuz.addr, &len); - } else - memcpy(elfheader, (const void *)vmlinuz.addr, - sizeof(elfheader)); - - if (!is_elf64(elfheader) && !is_elf32(elfheader)) { - printf("Error: not a valid PPC32 or PPC64 ELF file!\n\r"); - exit(); + /* If we have an image attached to us, it overrides anything + * supplied by the loader. */ + if (_initrd_end > _initrd_start) { + printf("Attached initrd image at 0x%p-0x%p\n\r", + _initrd_start, _initrd_end); + initrd_addr = (unsigned long)_initrd_start; + initrd_size = _initrd_end - _initrd_start; + } else if (initrd_size > 0) { + printf("Using loader supplied ramdisk at 0x%lx-0x%lx\n\r", + initrd_addr, initrd_addr + initrd_size); } - if (platform_ops.image_hdr) - platform_ops.image_hdr(elfheader); - /* We need to alloc the memsize plus the file offset since gzip - * will expand the header (file offset), then the kernel, then - * possible rubbish we don't care about. But the kernel bss must - * be claimed (it will be zero'd by the kernel itself) - */ - printf("Allocating 0x%lx bytes for kernel ...\n\r", vmlinux.memsize); - vmlinux.addr = (unsigned long)malloc(vmlinux.memsize); - if (vmlinux.addr == 0) { - printf("Can't allocate memory for kernel image !\n\r"); - exit(); - } + /* If there's no initrd at all, we're done */ + if (! initrd_size) + return (struct addr_range){0, 0}; /* - * Now find the initrd - * - * First see if we have an image attached to us. If so - * allocate memory for it and copy it there. + * If the initrd is too low it will be clobbered when the + * kernel relocates to its final location. In this case, + * allocate a safer place and move it. */ - initrd.size = (unsigned long)(_initrd_end - _initrd_start); - initrd.memsize = initrd.size; - if (initrd.size > 0) { + if (initrd_addr < vmlinux.size) { + void *old_addr = (void *)initrd_addr; + printf("Allocating 0x%lx bytes for initrd ...\n\r", - initrd.size); - initrd.addr = (unsigned long)malloc((u32)initrd.size); - if (initrd.addr == 0) { - printf("Can't allocate memory for initial " - "ramdisk !\n\r"); - exit(); - } - printf("initial ramdisk moving 0x%lx <- 0x%lx " - "(0x%lx bytes)\n\r", initrd.addr, - (unsigned long)_initrd_start, initrd.size); - memmove((void *)initrd.addr, (void *)_initrd_start, - initrd.size); - printf("initrd head: 0x%lx\n\r", - *((unsigned long *)initrd.addr)); - } else if (a2 != 0) { - /* Otherwise, see if yaboot or another loader gave us an initrd */ - initrd.addr = a1; - initrd.memsize = initrd.size = a2; - printf("Using loader supplied initrd at 0x%lx (0x%lx bytes)\n\r", - initrd.addr, initrd.size); + initrd_size); + initrd_addr = (unsigned long)malloc(initrd_size); + if (! initrd_addr) + fatal("Can't allocate memory for initial " + "ramdisk !\n\r"); + printf("Relocating initrd 0x%lx <- 0x%p (0x%lx bytes)\n\r", + initrd_addr, old_addr, initrd_size); + memmove((void *)initrd_addr, old_addr, initrd_size); } - /* Eventually gunzip the kernel */ - if (*(unsigned short *)vmlinuz.addr == 0x1f8b) { - printf("gunzipping (0x%lx <- 0x%lx:0x%0lx)...", - vmlinux.addr, vmlinuz.addr, vmlinuz.addr+vmlinuz.size); - len = vmlinuz.size; - gunzip((void *)vmlinux.addr, vmlinux.memsize, - (unsigned char *)vmlinuz.addr, &len); - printf("done 0x%lx bytes\n\r", len); - } else { - memmove((void *)vmlinux.addr,(void *)vmlinuz.addr, - vmlinuz.size); - } + printf("initrd head: 0x%lx\n\r", *((unsigned long *)initrd_addr)); - /* Skip over the ELF header */ -#ifdef DEBUG - printf("... skipping 0x%lx bytes of ELF header\n\r", - elfoffset); -#endif - vmlinux.addr += elfoffset; + /* Tell the kernel initrd address via device tree */ + setprop_val(chosen, "linux,initrd-start", (u32)(initrd_addr)); + setprop_val(chosen, "linux,initrd-end", (u32)(initrd_addr+initrd_size)); - flush_cache((void *)vmlinux.addr, vmlinux.size); + return (struct addr_range){(void *)initrd_addr, initrd_size}; } /* A buffer that may be edited by tools operating on a zImage binary so as to * edit the command line passed to vmlinux (by setting /chosen/bootargs). * The buffer is put in it's own section so that tools may locate it easier. */ -static char builtin_cmdline[COMMAND_LINE_SIZE] +static char cmdline[COMMAND_LINE_SIZE] __attribute__((__section__("__builtin_cmdline"))); -static void get_cmdline(char *buf, int size) +static void prep_cmdline(void *chosen) { - void *devp; - int len = strlen(builtin_cmdline); - - buf[0] = '\0'; - - if (len > 0) { /* builtin_cmdline overrides dt's /chosen/bootargs */ - len = min(len, size-1); - strncpy(buf, builtin_cmdline, len); - buf[len] = '\0'; - } - else if ((devp = finddevice("/chosen"))) - getprop(devp, "bootargs", buf, size); -} + if (cmdline[0] == '\0') + getprop(chosen, "bootargs", cmdline, COMMAND_LINE_SIZE-1); -static void set_cmdline(char *buf) -{ - void *devp; + printf("\n\rLinux/PowerPC load: %s", cmdline); + /* If possible, edit the command line */ + if (console_ops.edit_cmdline) + console_ops.edit_cmdline(cmdline, COMMAND_LINE_SIZE); + printf("\n\r"); - if ((devp = finddevice("/chosen"))) - setprop(devp, "bootargs", buf, strlen(buf) + 1); + /* Put the command line back into the devtree for the kernel */ + setprop_str(chosen, "bootargs", cmdline); } struct platform_ops platform_ops; struct dt_ops dt_ops; struct console_ops console_ops; +struct loader_info loader_info; -void start(unsigned long a1, unsigned long a2, void *promptr, void *sp) +void start(void) { + struct addr_range vmlinux, initrd; kernel_entry_t kentry; - char cmdline[COMMAND_LINE_SIZE]; unsigned long ft_addr = 0; + void *chosen; - memset(__bss_start, 0, _end - __bss_start); - memset(&platform_ops, 0, sizeof(platform_ops)); - memset(&dt_ops, 0, sizeof(dt_ops)); - memset(&console_ops, 0, sizeof(console_ops)); + /* Do this first, because malloc() could clobber the loader's + * command line. Only use the loader command line if a + * built-in command line wasn't set by an external tool */ + if ((loader_info.cmdline_len > 0) && (cmdline[0] == '\0')) + memmove(cmdline, loader_info.cmdline, + min(loader_info.cmdline_len, COMMAND_LINE_SIZE-1)); - if (platform_init(promptr, _dtb_start, _dtb_end)) - exit(); if (console_ops.open && (console_ops.open() < 0)) exit(); if (platform_ops.fixups) platform_ops.fixups(); printf("\n\rzImage starting: loaded at 0x%p (sp: 0x%p)\n\r", - _start, sp); + _start, get_sp()); - prep_kernel(a1, a2); + /* Ensure that the device tree has a /chosen node */ + chosen = finddevice("/chosen"); + if (!chosen) + chosen = create_node(NULL, "chosen"); - /* If cmdline came from zimage wrapper or if we can edit the one - * in the dt, print it out and edit it, if possible. - */ - if ((strlen(builtin_cmdline) > 0) || console_ops.edit_cmdline) { - get_cmdline(cmdline, COMMAND_LINE_SIZE); - printf("\n\rLinux/PowerPC load: %s", cmdline); - if (console_ops.edit_cmdline) - console_ops.edit_cmdline(cmdline, COMMAND_LINE_SIZE); - printf("\n\r"); - set_cmdline(cmdline); - } + vmlinux = prep_kernel(); + initrd = prep_initrd(vmlinux, chosen, + loader_info.initrd_addr, loader_info.initrd_size); + prep_cmdline(chosen); printf("Finalizing device tree..."); if (dt_ops.finalize) @@ -335,7 +203,7 @@ void start(unsigned long a1, unsigned long a2, void *promptr, void *sp) if (ft_addr) printf(" flat tree at 0x%lx\n\r", ft_addr); else - printf(" using OF tree (promptr=%p)\n\r", promptr); + printf(" using OF tree (promptr=%p)\n\r", loader_info.promptr); if (console_ops.close) console_ops.close(); @@ -344,10 +212,9 @@ void start(unsigned long a1, unsigned long a2, void *promptr, void *sp) if (ft_addr) kentry(ft_addr, 0, NULL); else - /* XXX initrd addr/size should be passed in properties */ - kentry(initrd.addr, initrd.size, promptr); + kentry((unsigned long)initrd.addr, initrd.size, + loader_info.promptr); - /* console closed so printf below may not work */ - printf("Error: Linux kernel returned to zImage boot wrapper!\n\r"); - exit(); + /* console closed so printf in fatal below may not work */ + fatal("Error: Linux kernel returned to zImage boot wrapper!\n\r"); } diff --git a/arch/powerpc/boot/ns16550.c b/arch/powerpc/boot/ns16550.c index 1ffe72e35cdc..f8f1b2f31412 100644 --- a/arch/powerpc/boot/ns16550.c +++ b/arch/powerpc/boot/ns16550.c @@ -55,10 +55,15 @@ static u8 ns16550_tstc(void) int ns16550_console_init(void *devp, struct serial_console_data *scdp) { int n; + unsigned long reg_phys; n = getprop(devp, "virtual-reg", ®_base, sizeof(reg_base)); - if (n != sizeof(reg_base)) - return -1; + if (n != sizeof(reg_base)) { + if (!dt_xlate_reg(devp, 0, ®_phys, NULL)) + return -1; + + reg_base = (void *)reg_phys; + } n = getprop(devp, "reg-shift", ®_shift, sizeof(reg_shift)); if (n != sizeof(reg_shift)) diff --git a/arch/powerpc/boot/of.c b/arch/powerpc/boot/of.c index 0182f384f3e6..d16ee3e3f868 100644 --- a/arch/powerpc/boot/of.c +++ b/arch/powerpc/boot/of.c @@ -173,7 +173,7 @@ static void *claim(unsigned long virt, unsigned long size, unsigned long align) return (void *) virt; } -static void *of_try_claim(u32 size) +static void *of_try_claim(unsigned long size) { unsigned long addr = 0; @@ -208,6 +208,16 @@ static void of_image_hdr(const void *hdr) } } +static void *of_vmlinux_alloc(unsigned long size) +{ + void *p = malloc(size); + + if (!p) + fatal("Can't allocate memory for kernel image!\n\r"); + + return p; +} + static void of_exit(void) { call_prom("exit", 0, 0); @@ -256,11 +266,12 @@ static void of_console_write(char *buf, int len) call_prom("write", 3, 1, of_stdout_handle, buf, len); } -int platform_init(void *promptr, char *dt_blob_start, char *dt_blob_end) +void platform_init(unsigned long a1, unsigned long a2, void *promptr) { platform_ops.image_hdr = of_image_hdr; platform_ops.malloc = of_try_claim; platform_ops.exit = of_exit; + platform_ops.vmlinux_alloc = of_vmlinux_alloc; dt_ops.finddevice = of_finddevice; dt_ops.getprop = of_getprop; @@ -270,5 +281,9 @@ int platform_init(void *promptr, char *dt_blob_start, char *dt_blob_end) console_ops.write = of_console_write; prom = (int (*)(void *))promptr; - return 0; + loader_info.promptr = promptr; + if (a1 && a2 && a2 != 0xdeadbeef) { + loader_info.initrd_addr = a1; + loader_info.initrd_size = a2; + } } diff --git a/arch/powerpc/boot/ops.h b/arch/powerpc/boot/ops.h index 8abb6516bb7c..73bd47a3a079 100644 --- a/arch/powerpc/boot/ops.h +++ b/arch/powerpc/boot/ops.h @@ -11,7 +11,9 @@ #ifndef _PPC_BOOT_OPS_H_ #define _PPC_BOOT_OPS_H_ +#include <stddef.h> #include "types.h" +#include "string.h" #define COMMAND_LINE_SIZE 512 #define MAX_PATH_LEN 256 @@ -21,10 +23,11 @@ struct platform_ops { void (*fixups)(void); void (*image_hdr)(const void *); - void * (*malloc)(u32 size); + void * (*malloc)(unsigned long size); void (*free)(void *ptr); void * (*realloc)(void *ptr, unsigned long size); void (*exit)(void); + void * (*vmlinux_alloc)(unsigned long size); }; extern struct platform_ops platform_ops; @@ -35,6 +38,12 @@ struct dt_ops { const int buflen); int (*setprop)(const void *phandle, const char *name, const void *buf, const int buflen); + void *(*get_parent)(const void *phandle); + /* The node must not already exist. */ + void *(*create_node)(const void *parent, const char *name); + void *(*find_node_by_prop_value)(const void *prev, + const char *propname, + const char *propval, int proplen); unsigned long (*finalize)(void); }; extern struct dt_ops dt_ops; @@ -58,13 +67,23 @@ struct serial_console_data { void (*close)(void); }; -int platform_init(void *promptr, char *dt_blob_start, char *dt_blob_end); +struct loader_info { + void *promptr; + unsigned long initrd_addr, initrd_size; + char *cmdline; + int cmdline_len; +}; +extern struct loader_info loader_info; + +void start(void); int ft_init(void *dt_blob, unsigned int max_size, unsigned int max_find_device); int serial_console_init(void); int ns16550_console_init(void *devp, struct serial_console_data *scdp); -void *simple_alloc_init(char *base, u32 heap_size, u32 granularity, - u32 max_allocs); - +void *simple_alloc_init(char *base, unsigned long heap_size, + unsigned long granularity, unsigned long max_allocs); +extern void flush_cache(void *, unsigned long); +int dt_xlate_reg(void *node, int res, unsigned long *addr, unsigned long *size); +int dt_xlate_addr(void *node, u32 *buf, int buflen, unsigned long *xlated_addr); static inline void *finddevice(const char *name) { @@ -76,12 +95,76 @@ static inline int getprop(void *devp, const char *name, void *buf, int buflen) return (dt_ops.getprop) ? dt_ops.getprop(devp, name, buf, buflen) : -1; } -static inline int setprop(void *devp, const char *name, void *buf, int buflen) +static inline int setprop(void *devp, const char *name, + const void *buf, int buflen) { return (dt_ops.setprop) ? dt_ops.setprop(devp, name, buf, buflen) : -1; } +#define setprop_val(devp, name, val) \ + do { \ + typeof(val) x = (val); \ + setprop((devp), (name), &x, sizeof(x)); \ + } while (0) + +static inline int setprop_str(void *devp, const char *name, const char *buf) +{ + if (dt_ops.setprop) + return dt_ops.setprop(devp, name, buf, strlen(buf) + 1); + + return -1; +} + +static inline void *get_parent(const char *devp) +{ + return dt_ops.get_parent ? dt_ops.get_parent(devp) : NULL; +} + +static inline void *create_node(const void *parent, const char *name) +{ + return dt_ops.create_node ? dt_ops.create_node(parent, name) : NULL; +} + -static inline void *malloc(u32 size) +static inline void *find_node_by_prop_value(const void *prev, + const char *propname, + const char *propval, int proplen) +{ + if (dt_ops.find_node_by_prop_value) + return dt_ops.find_node_by_prop_value(prev, propname, + propval, proplen); + + return NULL; +} + +static inline void *find_node_by_prop_value_str(const void *prev, + const char *propname, + const char *propval) +{ + return find_node_by_prop_value(prev, propname, propval, + strlen(propval) + 1); +} + +static inline void *find_node_by_devtype(const void *prev, + const char *type) +{ + return find_node_by_prop_value_str(prev, "device_type", type); +} + +void dt_fixup_memory(u64 start, u64 size); +void dt_fixup_cpu_clocks(u32 cpufreq, u32 tbfreq, u32 busfreq); +void dt_fixup_clock(const char *path, u32 freq); +void __dt_fixup_mac_addresses(u32 startindex, ...); +#define dt_fixup_mac_addresses(...) \ + __dt_fixup_mac_addresses(0, __VA_ARGS__, NULL) + + +static inline void *find_node_by_linuxphandle(const u32 linuxphandle) +{ + return find_node_by_prop_value(NULL, "linux,phandle", + (char *)&linuxphandle, sizeof(u32)); +} + +static inline void *malloc(unsigned long size) { return (platform_ops.malloc) ? platform_ops.malloc(size) : NULL; } @@ -98,5 +181,11 @@ static inline void exit(void) platform_ops.exit(); for(;;); } +#define fatal(args...) { printf(args); exit(); } + + +#define BSS_STACK(size) \ + static char _bss_stack[size]; \ + void *_platform_stack_top = _bss_stack + sizeof(_bss_stack); #endif /* _PPC_BOOT_OPS_H_ */ diff --git a/arch/powerpc/boot/ppcboot.h b/arch/powerpc/boot/ppcboot.h new file mode 100644 index 000000000000..5290ff2c2b2b --- /dev/null +++ b/arch/powerpc/boot/ppcboot.h @@ -0,0 +1,108 @@ +/* + * This interface is used for compatibility with old U-boots *ONLY*. + * Please do not imitate or extend this. + */ + +/* + * (C) Copyright 2000, 2001 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __PPCBOOT_H__ +#define __PPCBOOT_H__ + +/* + * Board information passed to kernel from PPCBoot + * + * include/asm-ppc/ppcboot.h + */ + +#include "types.h" + +typedef struct bd_info { + unsigned long bi_memstart; /* start of DRAM memory */ + unsigned long bi_memsize; /* size of DRAM memory in bytes */ + unsigned long bi_flashstart; /* start of FLASH memory */ + unsigned long bi_flashsize; /* size of FLASH memory */ + unsigned long bi_flashoffset; /* reserved area for startup monitor */ + unsigned long bi_sramstart; /* start of SRAM memory */ + unsigned long bi_sramsize; /* size of SRAM memory */ +#if defined(TARGET_8xx) || defined(TARGET_CPM2) || defined(TARGET_85xx) ||\ + defined(TARGET_83xx) + unsigned long bi_immr_base; /* base of IMMR register */ +#endif +#if defined(TARGET_PPC_MPC52xx) + unsigned long bi_mbar_base; /* base of internal registers */ +#endif + unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */ + unsigned long bi_ip_addr; /* IP Address */ + unsigned char bi_enetaddr[6]; /* Ethernet address */ + unsigned short bi_ethspeed; /* Ethernet speed in Mbps */ + unsigned long bi_intfreq; /* Internal Freq, in MHz */ + unsigned long bi_busfreq; /* Bus Freq, in MHz */ +#if defined(TARGET_CPM2) + unsigned long bi_cpmfreq; /* CPM_CLK Freq, in MHz */ + unsigned long bi_brgfreq; /* BRG_CLK Freq, in MHz */ + unsigned long bi_sccfreq; /* SCC_CLK Freq, in MHz */ + unsigned long bi_vco; /* VCO Out from PLL, in MHz */ +#endif +#if defined(TARGET_PPC_MPC52xx) + unsigned long bi_ipbfreq; /* IPB Bus Freq, in MHz */ + unsigned long bi_pcifreq; /* PCI Bus Freq, in MHz */ +#endif + unsigned long bi_baudrate; /* Console Baudrate */ +#if defined(TARGET_4xx) + unsigned char bi_s_version[4]; /* Version of this structure */ + unsigned char bi_r_version[32]; /* Version of the ROM (IBM) */ + unsigned int bi_procfreq; /* CPU (Internal) Freq, in Hz */ + unsigned int bi_plb_busfreq; /* PLB Bus speed, in Hz */ + unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */ + unsigned char bi_pci_enetaddr[6]; /* PCI Ethernet MAC address */ +#endif +#if defined(TARGET_HYMOD) + hymod_conf_t bi_hymod_conf; /* hymod configuration information */ +#endif +#if defined(TARGET_EVB64260) || defined(TARGET_405EP) || defined(TARGET_44x) || \ + defined(TARGET_85xx) || defined(TARGET_83xx) + /* second onboard ethernet port */ + unsigned char bi_enet1addr[6]; +#define HAVE_ENET1ADDR +#endif +#if defined(TARGET_EVB64260) || defined(TARGET_440GX) || defined(TARGET_85xx) + /* third onboard ethernet ports */ + unsigned char bi_enet2addr[6]; +#define HAVE_ENET2ADDR +#endif +#if defined(TARGET_440GX) + /* fourth onboard ethernet ports */ + unsigned char bi_enet3addr[6]; +#define HAVE_ENET3ADDR +#endif +#if defined(TARGET_4xx) + unsigned int bi_opbfreq; /* OB clock in Hz */ + int bi_iic_fast[2]; /* Use fast i2c mode */ +#endif +#if defined(TARGET_440GX) + int bi_phynum[4]; /* phy mapping */ + int bi_phymode[4]; /* phy mode */ +#endif +} bd_t; + +#define bi_tbfreq bi_intfreq + +#endif /* __PPCBOOT_H__ */ diff --git a/arch/powerpc/boot/reg.h b/arch/powerpc/boot/reg.h new file mode 100644 index 000000000000..d3cd9ee98afb --- /dev/null +++ b/arch/powerpc/boot/reg.h @@ -0,0 +1,22 @@ +#ifndef _PPC_BOOT_REG_H +#define _PPC_BOOT_REG_H +/* + * Copyright 2007 Davud Gibson, IBM Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +static inline u32 mfpvr(void) +{ + u32 pvr; + asm volatile ("mfpvr %0" : "=r"(pvr)); + return pvr; +} + +register void *__stack_pointer asm("r1"); +#define get_sp() (__stack_pointer) + +#endif /* _PPC_BOOT_REG_H */ diff --git a/arch/powerpc/boot/simple_alloc.c b/arch/powerpc/boot/simple_alloc.c index cfe3a7505ba0..65ec135d0157 100644 --- a/arch/powerpc/boot/simple_alloc.c +++ b/arch/powerpc/boot/simple_alloc.c @@ -19,24 +19,24 @@ #define ENTRY_IN_USE 0x02 static struct alloc_info { - u32 flags; - u32 base; - u32 size; + unsigned long flags; + unsigned long base; + unsigned long size; } *alloc_tbl; -static u32 tbl_entries; -static u32 alloc_min; -static u32 next_base; -static u32 space_left; +static unsigned long tbl_entries; +static unsigned long alloc_min; +static unsigned long next_base; +static unsigned long space_left; /* * First time an entry is used, its base and size are set. * An entry can be freed and re-malloc'd but its base & size don't change. * Should be smart enough for needs of bootwrapper. */ -static void *simple_malloc(u32 size) +static void *simple_malloc(unsigned long size) { - u32 i; + unsigned long i; struct alloc_info *p = alloc_tbl; if (size == 0) @@ -67,13 +67,14 @@ err_out: static struct alloc_info *simple_find_entry(void *ptr) { - u32 i; + unsigned long i; struct alloc_info *p = alloc_tbl; for (i=0; i<tbl_entries; i++,p++) { if (!(p->flags & ENTRY_BEEN_USED)) break; - if ((p->flags & ENTRY_IN_USE) && (p->base == (u32)ptr)) + if ((p->flags & ENTRY_IN_USE) && + (p->base == (unsigned long)ptr)) return p; } return NULL; @@ -122,10 +123,10 @@ static void *simple_realloc(void *ptr, unsigned long size) * Returns addr of first byte after heap so caller can see if it took * too much space. If so, change args & try again. */ -void *simple_alloc_init(char *base, u32 heap_size, u32 granularity, - u32 max_allocs) +void *simple_alloc_init(char *base, unsigned long heap_size, + unsigned long granularity, unsigned long max_allocs) { - u32 heap_base, tbl_size; + unsigned long heap_base, tbl_size; heap_size = _ALIGN_UP(heap_size, granularity); alloc_min = granularity; @@ -136,7 +137,7 @@ void *simple_alloc_init(char *base, u32 heap_size, u32 granularity, alloc_tbl = (struct alloc_info *)_ALIGN_UP((unsigned long)base, 8); memset(alloc_tbl, 0, tbl_size); - heap_base = _ALIGN_UP((u32)alloc_tbl + tbl_size, alloc_min); + heap_base = _ALIGN_UP((unsigned long)alloc_tbl + tbl_size, alloc_min); next_base = heap_base; space_left = heap_size; diff --git a/arch/powerpc/boot/stdio.h b/arch/powerpc/boot/stdio.h index 73b8a91bfb34..adffc58412d4 100644 --- a/arch/powerpc/boot/stdio.h +++ b/arch/powerpc/boot/stdio.h @@ -7,11 +7,12 @@ #define EINVAL 22 /* Invalid argument */ #define ENOSPC 28 /* No space left on device */ -extern int printf(const char *fmt, ...); +extern int printf(const char *fmt, ...) __attribute__((format(printf, 1, 2))); #define fprintf(fmt, args...) printf(args) -extern int sprintf(char *buf, const char *fmt, ...); +extern int sprintf(char *buf, const char *fmt, ...) + __attribute__((format(printf, 2, 3))); extern int vsprintf(char *buf, const char *fmt, va_list args); diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper index 024e4d425c59..5cedd901201f 100755 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -29,6 +29,7 @@ initrd= dtb= dts= cacheit= +gzip=.gz # cross-compilation prefix CROSS= @@ -42,7 +43,7 @@ tmpdir=. usage() { echo 'Usage: wrapper [-o output] [-p platform] [-i initrd]' >&2 echo ' [-d devtree] [-s tree.dts] [-c] [-C cross-prefix]' >&2 - echo ' [-D datadir] [-W workingdir] [vmlinux]' >&2 + echo ' [-D datadir] [-W workingdir] [--no-gzip] [vmlinux]' >&2 exit 1 } @@ -91,6 +92,9 @@ while [ "$#" -gt 0 ]; do [ "$#" -gt 0 ] || usage tmpdir="$1" ;; + --no-gzip) + gzip= + ;; -?) usage ;; @@ -137,31 +141,44 @@ miboot|uboot) ksection=image isection=initrd ;; +cuboot*) + gzip= + ;; esac vmz="$tmpdir/`basename \"$kernel\"`.$ext" -if [ -z "$cacheit" -o ! -f "$vmz.gz" -o "$vmz.gz" -ot "$kernel" ]; then +if [ -z "$cacheit" -o ! -f "$vmz$gzip" -o "$vmz$gzip" -ot "$kernel" ]; then ${CROSS}objcopy $objflags "$kernel" "$vmz.$$" - gzip -f -9 "$vmz.$$" + + if [ -n "$gzip" ]; then + gzip -f -9 "$vmz.$$" + fi + if [ -n "$cacheit" ]; then - mv -f "$vmz.$$.gz" "$vmz.gz" + mv -f "$vmz.$$$gzip" "$vmz$gzip" else vmz="$vmz.$$" fi fi +vmz="$vmz$gzip" + case "$platform" in -uboot) - rm -f "$ofile" +uboot|cuboot*) version=`${CROSS}strings "$kernel" | grep '^Linux version [-0-9.]' | \ cut -d' ' -f3` if [ -n "$version" ]; then version="-n Linux-$version" fi +esac + +case "$platform" in +uboot) + rm -f "$ofile" mkimage -A ppc -O linux -T kernel -C gzip -a 00000000 -e 00000000 \ - $version -d "$vmz.gz" "$ofile" + $version -d "$vmz" "$ofile" if [ -z "$cacheit" ]; then - rm -f $vmz.gz + rm -f "$vmz" fi exit 0 ;; @@ -173,9 +190,9 @@ addsec() { --set-section-flags=$3=contents,alloc,load,readonly,data } -addsec $tmp "$vmz.gz" $ksection $object/empty.o +addsec $tmp "$vmz" $ksection $object/empty.o if [ -z "$cacheit" ]; then - rm -f "$vmz.gz" + rm -f "$vmz" fi if [ -n "$initrd" ]; then @@ -191,7 +208,7 @@ fi if [ "$platform" != "miboot" ]; then ${CROSS}ld -m elf32ppc -T $lds -o "$ofile" \ - $object/crt0.o $platformo $tmp $object/wrapper.a + $platformo $tmp $object/wrapper.a rm $tmp fi @@ -201,7 +218,19 @@ pseries|chrp) $object/addnote "$ofile" ;; pmaccoff) - ${CROSS}objcopy -O aixcoff-rs6000 --set-start 0x500000 "$ofile" + entry=`objdump -f "$ofile" | grep '^start address ' | \ + cut -d' ' -f3` + ${CROSS}objcopy -O aixcoff-rs6000 --set-start "$entry" "$ofile" $object/hack-coff "$ofile" ;; +cuboot*) + base=`${CROSS}nm "$ofile" | grep ' _start$' | cut -d' ' -f1` + entry=`${CROSS}objdump -f "$ofile" | grep '^start address ' | \ + cut -d' ' -f3` + mv "$ofile" "$ofile".elf + ${CROSS}objcopy -O binary "$ofile".elf "$ofile".bin + gzip -f -9 "$ofile".bin + mkimage -A ppc -O linux -T kernel -C gzip -a "$base" -e "$entry" \ + $version -d "$ofile".bin.gz "$ofile" + ;; esac diff --git a/arch/powerpc/boot/zImage.coff.lds.S b/arch/powerpc/boot/zImage.coff.lds.S index a360905e5428..fe87a90ce7f1 100644 --- a/arch/powerpc/boot/zImage.coff.lds.S +++ b/arch/powerpc/boot/zImage.coff.lds.S @@ -1,5 +1,6 @@ OUTPUT_ARCH(powerpc:common) -ENTRY(_start) +ENTRY(_zimage_start_opd) +EXTERN(_zimage_start_opd) SECTIONS { . = (5*1024*1024); diff --git a/arch/powerpc/boot/zImage.lds.S b/arch/powerpc/boot/zImage.lds.S index 4be3c6414b04..f6e380fdb388 100644 --- a/arch/powerpc/boot/zImage.lds.S +++ b/arch/powerpc/boot/zImage.lds.S @@ -1,5 +1,6 @@ OUTPUT_ARCH(powerpc:common) ENTRY(_zimage_start) +EXTERN(_zimage_start) SECTIONS { . = (4*1024*1024); diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig index cf7e316ad4f6..6061e5f7696e 100644 --- a/arch/powerpc/configs/cell_defconfig +++ b/arch/powerpc/configs/cell_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21-rc3 -# Fri Mar 9 23:34:53 2007 +# Linux kernel version: 2.6.21-rc6 +# Mon Apr 23 20:46:48 2007 # CONFIG_PPC64=y CONFIG_64BIT=y @@ -139,11 +139,31 @@ CONFIG_PPC_MULTIPLATFORM=y # CONFIG_PPC_PMAC is not set # CONFIG_PPC_MAPLE is not set # CONFIG_PPC_PASEMI is not set +CONFIG_PPC_CELLEB=y +CONFIG_PPC_PS3=y + +# +# PS3 Platform Options +# +# CONFIG_PS3_ADVANCED is not set +CONFIG_PS3_HTAB_SIZE=20 +# CONFIG_PS3_DYNAMIC_DMA is not set +CONFIG_PS3_USE_LPAR_ADDR=y +CONFIG_PS3_VUART=y +CONFIG_PS3_PS3AV=y +CONFIG_PS3_SYS_MANAGER=y CONFIG_PPC_CELL=y CONFIG_PPC_CELL_NATIVE=y CONFIG_PPC_IBM_CELL_BLADE=y -CONFIG_PPC_PS3=y -CONFIG_PPC_CELLEB=y + +# +# Cell Broadband Engine options +# +CONFIG_SPU_FS=m +CONFIG_SPU_BASE=y +CONFIG_CBE_RAS=y +CONFIG_CBE_THERM=m +CONFIG_CBE_CPUFREQ=m CONFIG_PPC_NATIVE=y CONFIG_UDBG_RTAS_CONSOLE=y CONFIG_PPC_UDBG_BEAT=y @@ -175,26 +195,6 @@ CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y CONFIG_MPIC=y # -# Cell Broadband Engine options -# -CONFIG_SPU_FS=m -CONFIG_SPU_BASE=y -CONFIG_CBE_RAS=y -CONFIG_CBE_THERM=m -CONFIG_CBE_CPUFREQ=m - -# -# PS3 Platform Options -# -# CONFIG_PS3_ADVANCED is not set -CONFIG_PS3_HTAB_SIZE=20 -# CONFIG_PS3_DYNAMIC_DMA is not set -CONFIG_PS3_USE_LPAR_ADDR=y -CONFIG_PS3_VUART=y -CONFIG_PS3_PS3AV=y -CONFIG_PS3_SYS_MANAGER=y - -# # Kernel options # # CONFIG_HZ_100 is not set @@ -534,7 +534,6 @@ CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_OPTI621 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set CONFIG_BLK_DEV_AEC62XX=y # CONFIG_BLK_DEV_ALI15X3 is not set @@ -561,11 +560,10 @@ CONFIG_BLK_DEV_SIIMAGE=y # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set -CONFIG_BLK_DEV_IDE_CELLEB=y +CONFIG_BLK_DEV_CELLEB=y # CONFIG_IDE_ARM is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_IVB is not set -CONFIG_IDEDMA_AUTO=y # CONFIG_BLK_DEV_HD is not set # @@ -937,7 +935,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set CONFIG_HVC_DRIVER=y CONFIG_HVC_RTAS=y -# CONFIG_HVC_BEAT is not set +CONFIG_HVC_BEAT=y # # IPMI @@ -1482,6 +1480,8 @@ CONFIG_NLS_ISO8859_15=m # Distributed Lock Manager # # CONFIG_DLM is not set +# CONFIG_UCC_SLOW is not set +# CONFIG_UCC_FAST is not set # # Library routines @@ -1540,6 +1540,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_FAULT_INJECTION is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_PAGEALLOC is not set CONFIG_DEBUGGER=y CONFIG_XMON=y CONFIG_XMON_DEFAULT=y diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig index 7724847f702a..3ccf19d8da38 100644 --- a/arch/powerpc/configs/g5_defconfig +++ b/arch/powerpc/configs/g5_defconfig @@ -143,7 +143,7 @@ CONFIG_PPC_NATIVE=y CONFIG_U3_DART=y # CONFIG_PPC_RTAS is not set # CONFIG_MMIO_NVRAM is not set -CONFIG_MPIC_BROKEN_U3=y +CONFIG_MPIC_U3_HT_IRQS=y # CONFIG_PPC_MPC106 is not set CONFIG_PPC_970_NAP=y # CONFIG_PPC_INDIRECT_IO is not set diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig index de97f2f0ae96..15366f0e489f 100644 --- a/arch/powerpc/configs/maple_defconfig +++ b/arch/powerpc/configs/maple_defconfig @@ -146,7 +146,7 @@ CONFIG_PPC_RTAS=y CONFIG_RTAS_PROC=y # CONFIG_RTAS_FLASH is not set # CONFIG_MMIO_NVRAM is not set -CONFIG_MPIC_BROKEN_U3=y +CONFIG_MPIC_U3_HT_IRQS=y # CONFIG_PPC_MPC106 is not set CONFIG_PPC_970_NAP=y # CONFIG_PPC_INDIRECT_IO is not set diff --git a/arch/powerpc/configs/mpc832x_rdb_defconfig b/arch/powerpc/configs/mpc832x_rdb_defconfig new file mode 100644 index 000000000000..56fc0a824458 --- /dev/null +++ b/arch/powerpc/configs/mpc832x_rdb_defconfig @@ -0,0 +1,1292 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.21-rc3 +# Mon Mar 12 17:32:19 2007 +# +# CONFIG_PPC64 is not set +CONFIG_PPC32=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFAULT_UIMAGE=y + +# +# Processor support +# +# CONFIG_CLASSIC32 is not set +# CONFIG_PPC_82xx is not set +CONFIG_PPC_83xx=y +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_86xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_6xx=y +CONFIG_83xx=y +CONFIG_PPC_FPU=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y +# CONFIG_SMP is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +# CONFIG_EPOLL is not set +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_QUICC_ENGINE=y +CONFIG_PPC_GEN550=y +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Platform support +# +# CONFIG_MPC8313_RDB is not set +# CONFIG_MPC832x_MDS is not set +CONFIG_MPC832x_RDB=y +# CONFIG_MPC834x_MDS is not set +# CONFIG_MPC834x_ITX is not set +# CONFIG_MPC836x_MDS is not set +CONFIG_PPC_MPC832x=y +# CONFIG_MPIC is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_MATH_EMULATION=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_ISA_DMA=y +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_FSL_SOC=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_PCIEPORTBUS is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNPACPI is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=32768 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_SRP is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Macintosh device drivers +# +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_NET_PCI is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +CONFIG_E1000=y +# CONFIG_E1000_NAPI is not set +# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_GIANFAR is not set +CONFIG_UCC_GETH=y +CONFIG_UGETH_NAPI=y +# CONFIG_UGETH_MAGIC_PACKET is not set +# CONFIG_UGETH_FILTERING is not set +# CONFIG_UGETH_TX_ON_DEMOND is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_OF_PLATFORM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_83xx_WDT=y + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +CONFIG_GEN_RTC=y +# CONFIG_GEN_RTC_X is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PASEMI is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_M41T00 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ABITUGURU is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_FB is not set +# CONFIG_FB_IBM_GXT4500 is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PPC_OF=y +CONFIG_USB_OHCI_HCD_PPC_OF_BE=y +# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set +CONFIG_USB_OHCI_HCD_PCI=y +CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y +CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_TOUCHSCREEN is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set +# CONFIG_USB_GTCO is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET_MII is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +# CONFIG_RTC_CLASS is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# Auxiliary Display support +# + +# +# Virtualization +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +CONFIG_LDM_PARTITION=y +# CONFIG_LDM_DEBUG is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +CONFIG_NLS_CODEPAGE_932=y +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +CONFIG_NLS_ISO8859_8=y +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# QE Options +# +CONFIG_UCC_SLOW=y +CONFIG_UCC_FAST=y +CONFIG_UCC=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y + +# +# Instrumentation Support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_SERIAL_TEXT_DEBUG is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# diff --git a/arch/powerpc/configs/mpc8544_ds_defconfig b/arch/powerpc/configs/mpc8544_ds_defconfig new file mode 100644 index 000000000000..b563513cc96c --- /dev/null +++ b/arch/powerpc/configs/mpc8544_ds_defconfig @@ -0,0 +1,1077 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.21-rc3 +# Mon Mar 19 17:18:49 2007 +# +# CONFIG_PPC64 is not set +CONFIG_PPC32=y +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DEFAULT_UIMAGE=y + +# +# Processor support +# +# CONFIG_CLASSIC32 is not set +# CONFIG_PPC_82xx is not set +# CONFIG_PPC_83xx is not set +CONFIG_PPC_85xx=y +# CONFIG_PPC_86xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_85xx=y +CONFIG_E500=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_BOOKE=y +CONFIG_FSL_BOOKE=y +# CONFIG_PHYS_64BIT is not set +# CONFIG_SPE is not set +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_IPC_NS=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set +CONFIG_AUDIT=y +# CONFIG_AUDITSYSCALL is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_HOTPLUG is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SHMEM=y +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# Block layer +# +CONFIG_BLOCK=y +CONFIG_LBD=y +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_WANT_EARLY_SERIAL is not set + +# +# Platform support +# +# CONFIG_MPC8540_ADS is not set +# CONFIG_MPC8560_ADS is not set +# CONFIG_MPC85xx_CDS is not set +# CONFIG_MPC85xx_MDS is not set +CONFIG_MPC8544_DS=y +CONFIG_MPC85xx=y +CONFIG_PPC_INDIRECT_PCI_BE=y +CONFIG_MPIC=y + +# +# Kernel options +# +CONFIG_HIGHMEM=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_MISC=m +CONFIG_MATH_EMULATION=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_PROC_DEVICETREE=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="root=/dev/sda3 rw console=ttyS0,115200" +# CONFIG_PM is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_FSL_SOC=y +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set + +# +# PCCARD (PCMCIA/CardBus) support +# + +# +# PCI Hotplug Support +# + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0x80000000 +CONFIG_BOOT_LOAD=0x00800000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +CONFIG_NET_KEY=m +# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_ASK_IP_FIB_HASH=y +# CONFIG_IP_FIB_TRIE is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_NET_IPIP=y +CONFIG_NET_IPGRE=y +CONFIG_NET_IPGRE_BROADCAST=y +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +CONFIG_ARPD=y +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +CONFIG_IP_SCTP=m +# CONFIG_SCTP_DBG_MSG is not set +# CONFIG_SCTP_DBG_OBJCNT is not set +# CONFIG_SCTP_HMAC_NONE is not set +# CONFIG_SCTP_HMAC_SHA1 is not set +CONFIG_SCTP_HMAC_MD5=y + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set +CONFIG_FIB_RULES=y + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set + +# +# Memory Technology Devices (MTD) +# +# CONFIG_MTD is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNPACPI is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=2 +CONFIG_BLK_DEV_RAM_SIZE=16384 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# Misc devices +# + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=y +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +CONFIG_SCSI_LOGGING=y +# CONFIG_SCSI_SCAN_ASYNC is not set + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set + +# +# SCSI low-level drivers +# +# CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_DEBUG is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +CONFIG_ATA=y +# CONFIG_ATA_NONSTANDARD is not set +# CONFIG_PATA_PLATFORM is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Macintosh device drivers +# +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_WINDFARM is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +CONFIG_VITESSE_PHY=y +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_FIXED_PHY is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y + +# +# Ethernet (1000 Mbit) +# +CONFIG_GIANFAR=y +CONFIG_GFAR_NAPI=y + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_OF_PLATFORM is not set +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set +CONFIG_NVRAM=y +CONFIG_GEN_RTC=y +CONFIG_GEN_RTC_X=y +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +CONFIG_DVB=y +CONFIG_DVB_CORE=m +# CONFIG_DVB_CORE_ATTACH is not set + +# +# Supported DVB Frontends +# + +# +# Customise DVB Frontends +# +# CONFIG_DVB_FE_CUSTOMISE is not set + +# +# DVB-S (satellite) frontends +# + +# +# DVB-T (terrestrial) frontends +# + +# +# DVB-C (cable) frontends +# + +# +# ATSC (North American/Korean Terrestrial/Cable DTV) frontends +# + +# +# Tuners/PLL support +# + +# +# Miscellaneous devices +# + +# +# Graphics support +# +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_FB is not set +# CONFIG_FB_IBM_GXT4500 is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# HID Devices +# +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set + +# +# USB support +# +# CONFIG_USB_ARCH_HAS_HCD is not set +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# + +# +# InfiniBand support +# + +# +# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set + +# +# RTC drivers +# +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# +# Auxiliary Display support +# + +# +# Virtualization +# + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_NTFS_FS=y +# CONFIG_NTFS_DEBUG is not set +# CONFIG_NTFS_RW is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +CONFIG_ADFS_FS=m +# CONFIG_ADFS_FS_RW is not set +CONFIG_AFFS_FS=m +CONFIG_HFS_FS=m +CONFIG_HFSPLUS_FS=m +CONFIG_BEFS_FS=m +# CONFIG_BEFS_DEBUG is not set +CONFIG_BFS_FS=m +CONFIG_EFS_FS=m +CONFIG_CRAMFS=y +CONFIG_VXFS_FS=m +CONFIG_HPFS_FS=m +CONFIG_QNX4FS_FS=m +CONFIG_SYSV_FS=m +CONFIG_UFS_FS=m +# CONFIG_UFS_FS_WRITE is not set +# CONFIG_UFS_DEBUG is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m + +# +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y + +# +# Instrumentation Support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_HIGHMEM is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +CONFIG_FORCED_INLINING=y +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUGGER is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_ECB is not set +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index a8da0aea3b87..126b9f87df25 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -152,7 +152,7 @@ CONFIG_RTAS_ERROR_LOGGING=y CONFIG_RTAS_PROC=y CONFIG_RTAS_FLASH=m CONFIG_MMIO_NVRAM=y -CONFIG_MPIC_BROKEN_U3=y +CONFIG_MPIC_U3_HT_IRQS=y CONFIG_IBMVIO=y # CONFIG_IBMEBUS is not set # CONFIG_PPC_MPC106 is not set diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 8120d428ebfd..e0fa80eca366 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -25,8 +25,8 @@ obj-$(CONFIG_PPC_970_NAP) += idle_power4.o obj-$(CONFIG_PPC_OF) += of_device.o of_platform.o prom_parse.o procfs-$(CONFIG_PPC64) := proc_ppc64.o obj-$(CONFIG_PROC_FS) += $(procfs-y) -rtaspci-$(CONFIG_PPC64) := rtas_pci.o -obj-$(CONFIG_PPC_RTAS) += rtas.o rtas-rtc.o $(rtaspci-y) +rtaspci-$(CONFIG_PPC64)-$(CONFIG_PCI) := rtas_pci.o +obj-$(CONFIG_PPC_RTAS) += rtas.o rtas-rtc.o $(rtaspci-y-y) obj-$(CONFIG_RTAS_FLASH) += rtas_flash.o obj-$(CONFIG_RTAS_PROC) += rtas-proc.o obj-$(CONFIG_LPARCFG) += lparcfg.o diff --git a/arch/powerpc/kernel/align.c b/arch/powerpc/kernel/align.c index 4734b5de599d..5c9ff7f5c44e 100644 --- a/arch/powerpc/kernel/align.c +++ b/arch/powerpc/kernel/align.c @@ -241,7 +241,7 @@ static int emulate_dcbz(struct pt_regs *regs, unsigned char __user *addr) if (user_mode(regs) && !access_ok(VERIFY_WRITE, p, size)) return -EFAULT; for (i = 0; i < size / sizeof(long); ++i) - if (__put_user(0, p+i)) + if (__put_user_inatomic(0, p+i)) return -EFAULT; return 1; } @@ -288,7 +288,8 @@ static int emulate_multiple(struct pt_regs *regs, unsigned char __user *addr, } else { unsigned long pc = regs->nip ^ (swiz & 4); - if (__get_user(instr, (unsigned int __user *)pc)) + if (__get_user_inatomic(instr, + (unsigned int __user *)pc)) return -EFAULT; if (swiz == 0 && (flags & SW)) instr = cpu_to_le32(instr); @@ -324,27 +325,31 @@ static int emulate_multiple(struct pt_regs *regs, unsigned char __user *addr, ((nb0 + 3) / 4) * sizeof(unsigned long)); for (i = 0; i < nb; ++i, ++p) - if (__get_user(REG_BYTE(rptr, i ^ bswiz), SWIZ_PTR(p))) + if (__get_user_inatomic(REG_BYTE(rptr, i ^ bswiz), + SWIZ_PTR(p))) return -EFAULT; if (nb0 > 0) { rptr = ®s->gpr[0]; addr += nb; for (i = 0; i < nb0; ++i, ++p) - if (__get_user(REG_BYTE(rptr, i ^ bswiz), - SWIZ_PTR(p))) + if (__get_user_inatomic(REG_BYTE(rptr, + i ^ bswiz), + SWIZ_PTR(p))) return -EFAULT; } } else { for (i = 0; i < nb; ++i, ++p) - if (__put_user(REG_BYTE(rptr, i ^ bswiz), SWIZ_PTR(p))) + if (__put_user_inatomic(REG_BYTE(rptr, i ^ bswiz), + SWIZ_PTR(p))) return -EFAULT; if (nb0 > 0) { rptr = ®s->gpr[0]; addr += nb; for (i = 0; i < nb0; ++i, ++p) - if (__put_user(REG_BYTE(rptr, i ^ bswiz), - SWIZ_PTR(p))) + if (__put_user_inatomic(REG_BYTE(rptr, + i ^ bswiz), + SWIZ_PTR(p))) return -EFAULT; } } @@ -398,7 +403,8 @@ int fix_alignment(struct pt_regs *regs) if (cpu_has_feature(CPU_FTR_PPC_LE) && (regs->msr & MSR_LE)) pc ^= 4; - if (unlikely(__get_user(instr, (unsigned int __user *)pc))) + if (unlikely(__get_user_inatomic(instr, + (unsigned int __user *)pc))) return -EFAULT; if (cpu_has_feature(CPU_FTR_REAL_LE) && (regs->msr & MSR_LE)) instr = cpu_to_le32(instr); @@ -474,16 +480,16 @@ int fix_alignment(struct pt_regs *regs) p = (unsigned long) addr; switch (nb) { case 8: - ret |= __get_user(data.v[0], SWIZ_PTR(p++)); - ret |= __get_user(data.v[1], SWIZ_PTR(p++)); - ret |= __get_user(data.v[2], SWIZ_PTR(p++)); - ret |= __get_user(data.v[3], SWIZ_PTR(p++)); + ret |= __get_user_inatomic(data.v[0], SWIZ_PTR(p++)); + ret |= __get_user_inatomic(data.v[1], SWIZ_PTR(p++)); + ret |= __get_user_inatomic(data.v[2], SWIZ_PTR(p++)); + ret |= __get_user_inatomic(data.v[3], SWIZ_PTR(p++)); case 4: - ret |= __get_user(data.v[4], SWIZ_PTR(p++)); - ret |= __get_user(data.v[5], SWIZ_PTR(p++)); + ret |= __get_user_inatomic(data.v[4], SWIZ_PTR(p++)); + ret |= __get_user_inatomic(data.v[5], SWIZ_PTR(p++)); case 2: - ret |= __get_user(data.v[6], SWIZ_PTR(p++)); - ret |= __get_user(data.v[7], SWIZ_PTR(p++)); + ret |= __get_user_inatomic(data.v[6], SWIZ_PTR(p++)); + ret |= __get_user_inatomic(data.v[7], SWIZ_PTR(p++)); if (unlikely(ret)) return -EFAULT; } @@ -551,16 +557,16 @@ int fix_alignment(struct pt_regs *regs) p = (unsigned long) addr; switch (nb) { case 8: - ret |= __put_user(data.v[0], SWIZ_PTR(p++)); - ret |= __put_user(data.v[1], SWIZ_PTR(p++)); - ret |= __put_user(data.v[2], SWIZ_PTR(p++)); - ret |= __put_user(data.v[3], SWIZ_PTR(p++)); + ret |= __put_user_inatomic(data.v[0], SWIZ_PTR(p++)); + ret |= __put_user_inatomic(data.v[1], SWIZ_PTR(p++)); + ret |= __put_user_inatomic(data.v[2], SWIZ_PTR(p++)); + ret |= __put_user_inatomic(data.v[3], SWIZ_PTR(p++)); case 4: - ret |= __put_user(data.v[4], SWIZ_PTR(p++)); - ret |= __put_user(data.v[5], SWIZ_PTR(p++)); + ret |= __put_user_inatomic(data.v[4], SWIZ_PTR(p++)); + ret |= __put_user_inatomic(data.v[5], SWIZ_PTR(p++)); case 2: - ret |= __put_user(data.v[6], SWIZ_PTR(p++)); - ret |= __put_user(data.v[7], SWIZ_PTR(p++)); + ret |= __put_user_inatomic(data.v[6], SWIZ_PTR(p++)); + ret |= __put_user_inatomic(data.v[7], SWIZ_PTR(p++)); } if (unlikely(ret)) return -EFAULT; diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 030d300cd71c..0c5150c69175 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -77,7 +77,6 @@ int main(void) DEFINE(KSP_VSID, offsetof(struct thread_struct, ksp_vsid)); #else /* CONFIG_PPC64 */ DEFINE(PGDIR, offsetof(struct thread_struct, pgdir)); - DEFINE(LAST_SYSCALL, offsetof(struct thread_struct, last_syscall)); #if defined(CONFIG_4xx) || defined(CONFIG_BOOKE) DEFINE(THREAD_DBCR0, offsetof(struct thread_struct, dbcr0)); DEFINE(PT_PTRACED, PT_PTRACED); @@ -140,6 +139,7 @@ int main(void) DEFINE(PACA_SYSTEM_TIME, offsetof(struct paca_struct, system_time)); DEFINE(PACA_SLBSHADOWPTR, offsetof(struct paca_struct, slb_shadow_ptr)); DEFINE(PACA_DATA_OFFSET, offsetof(struct paca_struct, data_offset)); + DEFINE(PACA_TRAP_SAVE, offsetof(struct paca_struct, trap_save)); DEFINE(SLBSHADOW_STACKVSID, offsetof(struct slb_shadow, save_area[SLB_NUM_BOLTED - 1].vsid)); diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c index 3678997339d6..e7b684689e04 100644 --- a/arch/powerpc/kernel/btext.c +++ b/arch/powerpc/kernel/btext.c @@ -161,33 +161,33 @@ int btext_initialize(struct device_node *np) unsigned long address = 0; const u32 *prop; - prop = get_property(np, "linux,bootx-width", NULL); + prop = of_get_property(np, "linux,bootx-width", NULL); if (prop == NULL) - prop = get_property(np, "width", NULL); + prop = of_get_property(np, "width", NULL); if (prop == NULL) return -EINVAL; width = *prop; - prop = get_property(np, "linux,bootx-height", NULL); + prop = of_get_property(np, "linux,bootx-height", NULL); if (prop == NULL) - prop = get_property(np, "height", NULL); + prop = of_get_property(np, "height", NULL); if (prop == NULL) return -EINVAL; height = *prop; - prop = get_property(np, "linux,bootx-depth", NULL); + prop = of_get_property(np, "linux,bootx-depth", NULL); if (prop == NULL) - prop = get_property(np, "depth", NULL); + prop = of_get_property(np, "depth", NULL); if (prop == NULL) return -EINVAL; depth = *prop; pitch = width * ((depth + 7) / 8); - prop = get_property(np, "linux,bootx-linebytes", NULL); + prop = of_get_property(np, "linux,bootx-linebytes", NULL); if (prop == NULL) - prop = get_property(np, "linebytes", NULL); + prop = of_get_property(np, "linebytes", NULL); if (prop && *prop != 0xffffffffu) pitch = *prop; if (pitch == 1) pitch = 0x1000; - prop = get_property(np, "address", NULL); + prop = of_get_property(np, "address", NULL); if (prop) address = *prop; @@ -219,7 +219,7 @@ int __init btext_find_display(int allow_nonstdout) struct device_node *np = NULL; int rc = -ENODEV; - name = get_property(of_chosen, "linux,stdout-path", NULL); + name = of_get_property(of_chosen, "linux,stdout-path", NULL); if (name != NULL) { np = of_find_node_by_path(name); if (np != NULL) { @@ -236,7 +236,7 @@ int __init btext_find_display(int allow_nonstdout) return rc; for (np = NULL; (np = of_find_node_by_type(np, "display"));) { - if (get_property(np, "linux,opened", NULL)) { + if (of_get_property(np, "linux,opened", NULL)) { printk("trying %s ...\n", np->full_name); rc = btext_initialize(np); printk("result: %d\n", rc); diff --git a/arch/powerpc/kernel/cpu_setup_pa6t.S b/arch/powerpc/kernel/cpu_setup_pa6t.S index 4047be25c4d2..d62cb9cae4e9 100644 --- a/arch/powerpc/kernel/cpu_setup_pa6t.S +++ b/arch/powerpc/kernel/cpu_setup_pa6t.S @@ -34,7 +34,7 @@ _GLOBAL(__setup_cpu_pa6t) beqlr mfspr r0,SPRN_HID5 - ori r0,r0,0x30 + ori r0,r0,0x38 mtspr SPRN_HID5,r0 mfspr r0,SPRN_LPCR diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index e4006dc087ca..9cb24d20f0f9 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -389,6 +389,8 @@ static struct cpu_spec cpu_specs[] = { .pmc_type = PPC_PMC_PA6T, .cpu_setup = __setup_cpu_pa6t, .cpu_restore = __restore_cpu_pa6t, + .oprofile_cpu_type = "ppc64/pa6t", + .oprofile_type = PPC_OPROFILE_PA6T, .platform = "pa6t", }, { /* default match */ @@ -558,6 +560,18 @@ static struct cpu_spec cpu_specs[] = { .cpu_setup = __setup_cpu_750cx, .platform = "ppc750", }, + { /* 750CL */ + .pvr_mask = 0xfffff0f0, + .pvr_value = 0x00087010, + .cpu_name = "750CL", + .cpu_features = CPU_FTRS_750CL, + .cpu_user_features = COMMON_USER | PPC_FEATURE_PPC_LE, + .icache_bsize = 32, + .dcache_bsize = 32, + .num_pmcs = 4, + .cpu_setup = __setup_cpu_750, + .platform = "ppc750", + }, { /* 745/755 */ .pvr_mask = 0xfffff000, .pvr_value = 0x00083000, diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S index c03e829fee3c..c29d1652a421 100644 --- a/arch/powerpc/kernel/entry_32.S +++ b/arch/powerpc/kernel/entry_32.S @@ -191,7 +191,6 @@ stack_ovf: 0: _GLOBAL(DoSyscall) - stw r0,THREAD+LAST_SYSCALL(r2) stw r3,ORIG_GPR3(r1) li r12,0 stw r12,RESULT(r1) diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 97cedcd6c9b4..1111fcec7673 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -278,8 +278,12 @@ exception_marker: beq- 1f; \ ld r1,PACAKSAVE(r13); /* kernel stack to use */ \ 1: cmpdi cr1,r1,0; /* check if r1 is in userspace */ \ - bge- cr1,bad_stack; /* abort if it is */ \ - std r9,_CCR(r1); /* save CR in stackframe */ \ + bge- cr1,2f; /* abort if it is */ \ + b 3f; \ +2: li r1,(n); /* will be reloaded later */ \ + sth r1,PACA_TRAP_SAVE(r13); \ + b bad_stack; \ +3: std r9,_CCR(r1); /* save CR in stackframe */ \ std r11,_NIP(r1); /* save SRR0 in stackframe */ \ std r12,_MSR(r1); /* save SRR1 in stackframe */ \ std r10,0(r1); /* make stack chain pointer */ \ @@ -940,6 +944,8 @@ bad_stack: SAVE_2GPRS(7,r1) SAVE_10GPRS(12,r1) SAVE_10GPRS(22,r1) + lhz r12,PACA_TRAP_SAVE(r13) + std r12,_TRAP(r1) addi r11,r1,INT_FRAME_SIZE std r11,0(r1) li r12,0 @@ -1555,7 +1561,6 @@ _GLOBAL(generic_secondary_smp_init) /* turn on 64-bit mode */ bl .enable_64b_mode - isync /* Set up a paca value for this processor. Since we have the * physical cpu id in r24, we need to search the pacas to find @@ -1735,10 +1740,6 @@ _STATIC(__boot_from_prom) /* We never return */ trap -/* - * At this point, r3 contains the physical address we are running at, - * returned by prom_init() - */ _STATIC(__after_prom_start) /* @@ -1851,7 +1852,6 @@ __secondary_start_pmac_0: _GLOBAL(pmac_secondary_start) /* turn on 64-bit mode */ bl .enable_64b_mode - isync /* Copy some CPU settings from CPU 0 */ bl .__restore_cpu_ppc970 diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c index 82bd2f10770f..9a8c9af43b22 100644 --- a/arch/powerpc/kernel/ibmebus.c +++ b/arch/powerpc/kernel/ibmebus.c @@ -2,36 +2,37 @@ * IBM PowerPC IBM eBus Infrastructure Support. * * Copyright (c) 2005 IBM Corporation + * Joachim Fenkes <fenkes@de.ibm.com> * Heiko J Schick <schickhj@de.ibm.com> - * + * * All rights reserved. * - * This source code is distributed under a dual license of GPL v2.0 and OpenIB - * BSD. + * This source code is distributed under a dual license of GPL v2.0 and OpenIB + * BSD. * * OpenIB BSD License * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: * - * Redistributions of source code must retain the above copyright notice, this - * list of conditions and the following disclaimer. + * Redistributions of source code must retain the above copyright notice, this + * list of conditions and the following disclaimer. * - * Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation + * Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation * and/or other materials - * provided with the distribution. + * provided with the distribution. * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER - * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ @@ -43,19 +44,19 @@ #include <asm/ibmebus.h> #include <asm/abs_addr.h> -static struct ibmebus_dev ibmebus_bus_device = { /* fake "parent" device */ - .name = ibmebus_bus_device.ofdev.dev.bus_id, - .ofdev.dev.bus_id = "ibmebus", - .ofdev.dev.bus = &ibmebus_bus_type, +static struct device ibmebus_bus_device = { /* fake "parent" device */ + .bus_id = "ibmebus", }; +struct bus_type ibmebus_bus_type; + static void *ibmebus_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flag) { void *mem; - + mem = kmalloc(size, flag); *dma_handle = (dma_addr_t)mem; @@ -63,7 +64,7 @@ static void *ibmebus_alloc_coherent(struct device *dev, } static void ibmebus_free_coherent(struct device *dev, - size_t size, void *vaddr, + size_t size, void *vaddr, dma_addr_t dma_handle) { kfree(vaddr); @@ -79,7 +80,7 @@ static dma_addr_t ibmebus_map_single(struct device *dev, static void ibmebus_unmap_single(struct device *dev, dma_addr_t dma_addr, - size_t size, + size_t size, enum dma_data_direction direction) { return; @@ -90,13 +91,13 @@ static int ibmebus_map_sg(struct device *dev, int nents, enum dma_data_direction direction) { int i; - + for (i = 0; i < nents; i++) { - sg[i].dma_address = (dma_addr_t)page_address(sg[i].page) + sg[i].dma_address = (dma_addr_t)page_address(sg[i].page) + sg[i].offset; sg[i].dma_length = sg[i].length; } - + return nents; } @@ -128,15 +129,15 @@ static int ibmebus_bus_probe(struct device *dev) struct ibmebus_driver *ibmebusdrv = to_ibmebus_driver(dev->driver); const struct of_device_id *id; int error = -ENODEV; - + if (!ibmebusdrv->probe) return error; - + id = of_match_device(ibmebusdrv->id_table, &ibmebusdev->ofdev); if (id) { error = ibmebusdrv->probe(ibmebusdev, id); } - + return error; } @@ -144,11 +145,11 @@ static int ibmebus_bus_remove(struct device *dev) { struct ibmebus_dev *ibmebusdev = to_ibmebus_dev(dev); struct ibmebus_driver *ibmebusdrv = to_ibmebus_driver(dev->driver); - + if (ibmebusdrv->remove) { return ibmebusdrv->remove(ibmebusdev); } - + return 0; } @@ -158,21 +159,12 @@ static void __devinit ibmebus_dev_release(struct device *dev) kfree(to_ibmebus_dev(dev)); } -static ssize_t ibmebusdev_show_name(struct device *dev, - struct device_attribute *attr, char *buf) -{ - return sprintf(buf, "%s\n", to_ibmebus_dev(dev)->name); -} -static DEVICE_ATTR(name, S_IRUSR | S_IRGRP | S_IROTH, ibmebusdev_show_name, - NULL); - -static struct ibmebus_dev* __devinit ibmebus_register_device_common( +static int __devinit ibmebus_register_device_common( struct ibmebus_dev *dev, const char *name) { int err = 0; - dev->name = name; - dev->ofdev.dev.parent = &ibmebus_bus_device.ofdev.dev; + dev->ofdev.dev.parent = &ibmebus_bus_device; dev->ofdev.dev.bus = &ibmebus_bus_type; dev->ofdev.dev.release = ibmebus_dev_release; @@ -181,17 +173,15 @@ static struct ibmebus_dev* __devinit ibmebus_register_device_common( dev->ofdev.dev.archdata.numa_node = of_node_to_nid(dev->ofdev.node); /* An ibmebusdev is based on a of_device. We have to change the - * bus type to use our own DMA mapping operations. - */ + * bus type to use our own DMA mapping operations. + */ if ((err = of_device_register(&dev->ofdev)) != 0) { printk(KERN_ERR "%s: failed to register device (%d).\n", __FUNCTION__, err); - return NULL; + return -ENODEV; } - - device_create_file(&dev->ofdev.dev, &dev_attr_name); - - return dev; + + return 0; } static struct ibmebus_dev* __devinit ibmebus_register_device_node( @@ -201,35 +191,35 @@ static struct ibmebus_dev* __devinit ibmebus_register_device_node( const char *loc_code; int length; - loc_code = get_property(dn, "ibm,loc-code", NULL); + loc_code = of_get_property(dn, "ibm,loc-code", NULL); if (!loc_code) { printk(KERN_WARNING "%s: node %s missing 'ibm,loc-code'\n", __FUNCTION__, dn->name ? dn->name : "<unknown>"); - return NULL; + return ERR_PTR(-EINVAL); } - + if (strlen(loc_code) == 0) { printk(KERN_WARNING "%s: 'ibm,loc-code' is invalid\n", __FUNCTION__); - return NULL; + return ERR_PTR(-EINVAL); } dev = kzalloc(sizeof(struct ibmebus_dev), GFP_KERNEL); if (!dev) { - return NULL; + return ERR_PTR(-ENOMEM); } dev->ofdev.node = of_node_get(dn); - + length = strlen(loc_code); - memcpy(dev->ofdev.dev.bus_id, loc_code - + (length - min(length, BUS_ID_SIZE - 1)), + memcpy(dev->ofdev.dev.bus_id, loc_code + + (length - min(length, BUS_ID_SIZE - 1)), min(length, BUS_ID_SIZE - 1)); /* Register with generic device framework. */ - if (ibmebus_register_device_common(dev, dn->name) == NULL) { + if (ibmebus_register_device_common(dev, dn->name) != 0) { kfree(dev); - return NULL; + return ERR_PTR(-ENODEV); } return dev; @@ -238,17 +228,16 @@ static struct ibmebus_dev* __devinit ibmebus_register_device_node( static void ibmebus_probe_of_nodes(char* name) { struct device_node *dn = NULL; - + while ((dn = of_find_node_by_name(dn, name))) { - if (ibmebus_register_device_node(dn) == NULL) { + if (IS_ERR(ibmebus_register_device_node(dn))) { of_node_put(dn); - return; } } - + of_node_put(dn); - + return; } @@ -262,17 +251,21 @@ static void ibmebus_add_devices_by_id(struct of_device_id *idt) return; } -static int ibmebus_match_helper(struct device *dev, void *data) +static int ibmebus_match_name(struct device *dev, void *data) { - if (strcmp((char*)data, to_ibmebus_dev(dev)->name) == 0) + const struct ibmebus_dev *ebus_dev = to_ibmebus_dev(dev); + const char *name; + + name = of_get_property(ebus_dev->ofdev.node, "name", NULL); + + if (name && (strcmp(data, name) == 0)) return 1; - + return 0; } static int ibmebus_unregister_device(struct device *dev) { - device_remove_file(dev, &dev_attr_name); of_device_unregister(to_of_device(dev)); return 0; @@ -281,17 +274,16 @@ static int ibmebus_unregister_device(struct device *dev) static void ibmebus_remove_devices_by_id(struct of_device_id *idt) { struct device *dev; - + while (strlen(idt->name) > 0) { - while ((dev = bus_find_device(&ibmebus_bus_type, NULL, + while ((dev = bus_find_device(&ibmebus_bus_type, NULL, (void*)idt->name, - ibmebus_match_helper))) { + ibmebus_match_name))) { ibmebus_unregister_device(dev); } idt++; - } - + return; } @@ -307,30 +299,33 @@ int ibmebus_register_driver(struct ibmebus_driver *drv) if ((err = driver_register(&drv->driver) != 0)) return err; + /* remove all supported devices first, in case someone + * probed them manually before registering the driver */ + ibmebus_remove_devices_by_id(drv->id_table); ibmebus_add_devices_by_id(drv->id_table); - + return 0; } EXPORT_SYMBOL(ibmebus_register_driver); void ibmebus_unregister_driver(struct ibmebus_driver *drv) -{ +{ driver_unregister(&drv->driver); ibmebus_remove_devices_by_id(drv->id_table); } EXPORT_SYMBOL(ibmebus_unregister_driver); int ibmebus_request_irq(struct ibmebus_dev *dev, - u32 ist, + u32 ist, irq_handler_t handler, unsigned long irq_flags, const char * devname, void *dev_id) { unsigned int irq = irq_create_mapping(NULL, ist); - + if (irq == NO_IRQ) return -EINVAL; - + return request_irq(irq, handler, irq_flags, devname, dev_id); } @@ -339,56 +334,163 @@ EXPORT_SYMBOL(ibmebus_request_irq); void ibmebus_free_irq(struct ibmebus_dev *dev, u32 ist, void *dev_id) { unsigned int irq = irq_find_mapping(NULL, ist); - + free_irq(irq, dev_id); } EXPORT_SYMBOL(ibmebus_free_irq); static int ibmebus_bus_match(struct device *dev, struct device_driver *drv) -{ +{ const struct ibmebus_dev *ebus_dev = to_ibmebus_dev(dev); struct ibmebus_driver *ebus_drv = to_ibmebus_driver(drv); const struct of_device_id *ids = ebus_drv->id_table; const struct of_device_id *found_id; - + if (!ids) return 0; - + found_id = of_match_device(ids, &ebus_dev->ofdev); if (found_id) return 1; - + return 0; } +static ssize_t name_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ibmebus_dev *ebus_dev = to_ibmebus_dev(dev); + const char *name = of_get_property(ebus_dev->ofdev.node, "name", NULL); + return sprintf(buf, "%s\n", name); +} + +static struct device_attribute ibmebus_dev_attrs[] = { + __ATTR_RO(name), + __ATTR_NULL +}; + +static int ibmebus_match_path(struct device *dev, void *data) +{ + int rc; + struct device_node *dn = + of_node_get(to_ibmebus_dev(dev)->ofdev.node); + + rc = (dn->full_name && (strcasecmp((char*)data, dn->full_name) == 0)); + + of_node_put(dn); + return rc; +} + +static char *ibmebus_chomp(const char *in, size_t count) +{ + char *out = (char*)kmalloc(count + 1, GFP_KERNEL); + if (!out) + return NULL; + + memcpy(out, in, count); + out[count] = '\0'; + if (out[count - 1] == '\n') + out[count - 1] = '\0'; + + return out; +} + +static ssize_t ibmebus_store_probe(struct bus_type *bus, + const char *buf, size_t count) +{ + struct device_node *dn = NULL; + struct ibmebus_dev *dev; + char *path; + ssize_t rc; + + path = ibmebus_chomp(buf, count); + if (!path) + return -ENOMEM; + + if (bus_find_device(&ibmebus_bus_type, NULL, path, + ibmebus_match_path)) { + printk(KERN_WARNING "%s: %s has already been probed\n", + __FUNCTION__, path); + rc = -EINVAL; + goto out; + } + + if ((dn = of_find_node_by_path(path))) { + dev = ibmebus_register_device_node(dn); + of_node_put(dn); + rc = IS_ERR(dev) ? PTR_ERR(dev) : count; + } else { + printk(KERN_WARNING "%s: no such device node: %s\n", + __FUNCTION__, path); + rc = -ENODEV; + } + +out: + kfree(path); + return rc; +} + +static ssize_t ibmebus_store_remove(struct bus_type *bus, + const char *buf, size_t count) +{ + struct device *dev; + char *path; + + path = ibmebus_chomp(buf, count); + if (!path) + return -ENOMEM; + + if ((dev = bus_find_device(&ibmebus_bus_type, NULL, path, + ibmebus_match_path))) { + ibmebus_unregister_device(dev); + + kfree(path); + return count; + } else { + printk(KERN_WARNING "%s: %s not on the bus\n", + __FUNCTION__, path); + + kfree(path); + return -ENODEV; + } +} + +static struct bus_attribute ibmebus_bus_attrs[] = { + __ATTR(probe, S_IWUSR, NULL, ibmebus_store_probe), + __ATTR(remove, S_IWUSR, NULL, ibmebus_store_remove), + __ATTR_NULL +}; + struct bus_type ibmebus_bus_type = { - .name = "ibmebus", - .match = ibmebus_bus_match, + .name = "ibmebus", + .match = ibmebus_bus_match, + .dev_attrs = ibmebus_dev_attrs, + .bus_attrs = ibmebus_bus_attrs }; EXPORT_SYMBOL(ibmebus_bus_type); static int __init ibmebus_bus_init(void) { int err; - + printk(KERN_INFO "IBM eBus Device Driver\n"); - + err = bus_register(&ibmebus_bus_type); if (err) { printk(KERN_ERR ":%s: failed to register IBM eBus.\n", __FUNCTION__); return err; } - - err = device_register(&ibmebus_bus_device.ofdev.dev); + + err = device_register(&ibmebus_bus_device); if (err) { - printk(KERN_WARNING "%s: device_register returned %i\n", + printk(KERN_WARNING "%s: device_register returned %i\n", __FUNCTION__, err); bus_unregister(&ibmebus_bus_type); return err; } - + return 0; } __initcall(ibmebus_bus_init); diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c index 95edad4faf26..c08ceca6277d 100644 --- a/arch/powerpc/kernel/iommu.c +++ b/arch/powerpc/kernel/iommu.c @@ -47,6 +47,8 @@ static int novmerge = 0; static int novmerge = 1; #endif +static int protect4gb = 1; + static inline unsigned long iommu_num_pages(unsigned long vaddr, unsigned long slen) { @@ -58,6 +60,16 @@ static inline unsigned long iommu_num_pages(unsigned long vaddr, return npages; } +static int __init setup_protect4gb(char *str) +{ + if (strcmp(str, "on") == 0) + protect4gb = 1; + else if (strcmp(str, "off") == 0) + protect4gb = 0; + + return 1; +} + static int __init setup_iommu(char *str) { if (!strcmp(str, "novmerge")) @@ -67,6 +79,7 @@ static int __init setup_iommu(char *str) return 1; } +__setup("protect4gb=", setup_protect4gb); __setup("iommu=", setup_iommu); static unsigned long iommu_range_alloc(struct iommu_table *tbl, @@ -429,6 +442,9 @@ void iommu_unmap_sg(struct iommu_table *tbl, struct scatterlist *sglist, struct iommu_table *iommu_init_table(struct iommu_table *tbl, int nid) { unsigned long sz; + unsigned long start_index, end_index; + unsigned long entries_per_4g; + unsigned long index; static int welcomed = 0; struct page *page; @@ -450,7 +466,7 @@ struct iommu_table *iommu_init_table(struct iommu_table *tbl, int nid) #ifdef CONFIG_CRASH_DUMP if (ppc_md.tce_get) { - unsigned long index, tceval; + unsigned long tceval; unsigned long tcecount = 0; /* @@ -480,6 +496,23 @@ struct iommu_table *iommu_init_table(struct iommu_table *tbl, int nid) ppc_md.tce_free(tbl, tbl->it_offset, tbl->it_size); #endif + /* + * DMA cannot cross 4 GB boundary. Mark last entry of each 4 + * GB chunk as reserved. + */ + if (protect4gb) { + entries_per_4g = 0x100000000l >> IOMMU_PAGE_SHIFT; + + /* Mark the last bit before a 4GB boundary as used */ + start_index = tbl->it_offset | (entries_per_4g - 1); + start_index -= tbl->it_offset; + + end_index = tbl->it_size; + + for (index = start_index; index < end_index - 1; index += entries_per_4g) + __set_bit(index, tbl->it_map); + } + if (!welcomed) { printk(KERN_INFO "IOMMU table initialized, virtual merging %s\n", novmerge ? "disabled" : "enabled"); diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 100930826850..6c83fe229e60 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -394,7 +394,7 @@ EXPORT_SYMBOL(do_softirq); #ifdef CONFIG_PPC_MERGE static LIST_HEAD(irq_hosts); -static spinlock_t irq_big_lock = SPIN_LOCK_UNLOCKED; +static DEFINE_SPINLOCK(irq_big_lock); static DEFINE_PER_CPU(unsigned int, irq_radix_reader); static unsigned int irq_radix_writer; struct irq_map_entry irq_map[NR_IRQS]; diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c index dd2886f97e98..ef647e7a9dc3 100644 --- a/arch/powerpc/kernel/kprobes.c +++ b/arch/powerpc/kernel/kprobes.c @@ -59,12 +59,14 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p) } if (!ret) { - memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t)); + memcpy(p->ainsn.insn, p->addr, + MAX_INSN_SIZE * sizeof(kprobe_opcode_t)); p->opcode = *p->addr; flush_icache_range((unsigned long)p->ainsn.insn, (unsigned long)p->ainsn.insn + sizeof(kprobe_opcode_t)); } + p->ainsn.boostable = 0; return ret; } @@ -232,6 +234,38 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) return 1; ss_probe: + if (p->ainsn.boostable >= 0) { + unsigned int insn = *p->ainsn.insn; + + /* regs->nip is also adjusted if emulate_step returns 1 */ + ret = emulate_step(regs, insn); + if (ret > 0) { + /* + * Once this instruction has been boosted + * successfully, set the boostable flag + */ + if (unlikely(p->ainsn.boostable == 0)) + p->ainsn.boostable = 1; + + if (p->post_handler) + p->post_handler(p, regs, 0); + + kcb->kprobe_status = KPROBE_HIT_SSDONE; + reset_current_kprobe(); + preempt_enable_no_resched(); + return 1; + } else if (ret < 0) { + /* + * We don't allow kprobes on mtmsr(d)/rfi(d), etc. + * So, we should never get here... but, its still + * good to catch them, just in case... + */ + printk("Can't step on instruction %x\n", insn); + BUG(); + } else if (ret == 0) + /* This instruction can't be boosted */ + p->ainsn.boostable = -1; + } prepare_singlestep(p, regs); kcb->kprobe_status = KPROBE_HIT_SS; return 1; diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c index 325f490a10cc..63dd2c3ad95e 100644 --- a/arch/powerpc/kernel/legacy_serial.c +++ b/arch/powerpc/kernel/legacy_serial.c @@ -44,12 +44,12 @@ static int __init add_legacy_port(struct device_node *np, int want_index, int index; /* get clock freq. if present */ - clk = get_property(np, "clock-frequency", NULL); + clk = of_get_property(np, "clock-frequency", NULL); if (clk && *clk) clock = *clk; /* get default speed if present */ - spd = get_property(np, "current-speed", NULL); + spd = of_get_property(np, "current-speed", NULL); /* If we have a location index, then try to use it */ if (want_index >= 0 && want_index < MAX_LEGACY_SERIAL_PORTS) @@ -121,11 +121,11 @@ static int __init add_legacy_soc_port(struct device_node *np, /* We only support ports that have a clock frequency properly * encoded in the device-tree. */ - if (get_property(np, "clock-frequency", NULL) == NULL) + if (of_get_property(np, "clock-frequency", NULL) == NULL) return -1; /* if rtas uses this device, don't try to use it as well */ - if (get_property(np, "used-by-rtas", NULL) != NULL) + if (of_get_property(np, "used-by-rtas", NULL) != NULL) return -1; /* Get the address */ @@ -157,7 +157,7 @@ static int __init add_legacy_isa_port(struct device_node *np, DBG(" -> add_legacy_isa_port(%s)\n", np->full_name); /* Get the ISA port number */ - reg = get_property(np, "reg", NULL); + reg = of_get_property(np, "reg", NULL); if (reg == NULL) return -1; @@ -168,7 +168,7 @@ static int __init add_legacy_isa_port(struct device_node *np, /* Now look for an "ibm,aix-loc" property that gives us ordering * if any... */ - typep = get_property(np, "ibm,aix-loc", NULL); + typep = of_get_property(np, "ibm,aix-loc", NULL); /* If we have a location index, then use it */ if (typep && *typep == 'S') @@ -206,7 +206,7 @@ static int __init add_legacy_pci_port(struct device_node *np, * compatible UARTs on PCI need all sort of quirks (port offsets * etc...) that this code doesn't know about */ - if (get_property(np, "clock-frequency", NULL) == NULL) + if (of_get_property(np, "clock-frequency", NULL) == NULL) return -1; /* Get the PCI address. Assume BAR 0 */ @@ -232,7 +232,7 @@ static int __init add_legacy_pci_port(struct device_node *np, * we get to their "reg" property */ if (np != pci_dev) { - const u32 *reg = get_property(np, "reg", NULL); + const u32 *reg = of_get_property(np, "reg", NULL); if (reg && (*reg < 4)) index = lindex = *reg; } @@ -296,7 +296,7 @@ void __init find_legacy_serial_ports(void) DBG(" -> find_legacy_serial_port()\n"); /* Now find out if one of these is out firmware console */ - path = get_property(of_chosen, "linux,stdout-path", NULL); + path = of_get_property(of_chosen, "linux,stdout-path", NULL); if (path != NULL) { stdout = of_find_node_by_path(path); if (stdout) @@ -529,7 +529,7 @@ static int __init check_legacy_serial_console(void) } /* We are getting a weird phandle from OF ... */ /* ... So use the full path instead */ - name = get_property(of_chosen, "linux,stdout-path", NULL); + name = of_get_property(of_chosen, "linux,stdout-path", NULL); if (name == NULL) { DBG(" no linux,stdout-path !\n"); return -ENODEV; @@ -541,12 +541,12 @@ static int __init check_legacy_serial_console(void) } DBG("stdout is %s\n", prom_stdout->full_name); - name = get_property(prom_stdout, "name", NULL); + name = of_get_property(prom_stdout, "name", NULL); if (!name) { DBG(" stdout package has no name !\n"); goto not_found; } - spd = get_property(prom_stdout, "current-speed", NULL); + spd = of_get_property(prom_stdout, "current-speed", NULL); if (spd) speed = *spd; diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c index 89486b631284..c492cee90e0f 100644 --- a/arch/powerpc/kernel/lparcfg.c +++ b/arch/powerpc/kernel/lparcfg.c @@ -130,30 +130,31 @@ static int iseries_lparcfg_data(struct seq_file *m, void *v) /* * Methods used to fetch LPAR data when running on a pSeries platform. */ -/* find a better place for this function... */ static void log_plpar_hcall_return(unsigned long rc, char *tag) { - if (rc == 0) /* success, return */ + switch(rc) { + case 0: return; -/* check for null tag ? */ - if (rc == H_HARDWARE) - printk(KERN_INFO - "plpar-hcall (%s) failed with hardware fault\n", tag); - else if (rc == H_FUNCTION) - printk(KERN_INFO - "plpar-hcall (%s) failed; function not allowed\n", tag); - else if (rc == H_AUTHORITY) - printk(KERN_INFO - "plpar-hcall (%s) failed; not authorized to this" - " function\n", tag); - else if (rc == H_PARAMETER) - printk(KERN_INFO "plpar-hcall (%s) failed; Bad parameter(s)\n", - tag); - else - printk(KERN_INFO - "plpar-hcall (%s) failed with unexpected rc(0x%lx)\n", - tag, rc); - + case H_HARDWARE: + printk(KERN_INFO "plpar-hcall (%s) " + "Hardware fault\n", tag); + return; + case H_FUNCTION: + printk(KERN_INFO "plpar-hcall (%s) " + "Function not allowed\n", tag); + return; + case H_AUTHORITY: + printk(KERN_INFO "plpar-hcall (%s) " + "Not authorized to this function\n", tag); + return; + case H_PARAMETER: + printk(KERN_INFO "plpar-hcall (%s) " + "Bad parameter(s)\n",tag); + return; + default: + printk(KERN_INFO "plpar-hcall (%s) " + "Unexpected rc(0x%lx)\n", tag, rc); + } } /* @@ -321,15 +322,16 @@ static int pseries_lparcfg_data(struct seq_file *m, void *v) struct device_node *rtas_node; const int *lrdrp = NULL; - rtas_node = find_path_device("/rtas"); + rtas_node = of_find_node_by_path("/rtas"); if (rtas_node) - lrdrp = get_property(rtas_node, "ibm,lrdr-capacity", NULL); + lrdrp = of_get_property(rtas_node, "ibm,lrdr-capacity", NULL); if (lrdrp == NULL) { partition_potential_processors = vdso_data->processorCount; } else { partition_potential_processors = *(lrdrp + 4); } + of_node_put(rtas_node); partition_active_processors = lparcfg_count_active_processors(); @@ -537,25 +539,27 @@ static int lparcfg_data(struct seq_file *m, void *v) seq_printf(m, "%s %s \n", MODULE_NAME, MODULE_VERS); - rootdn = find_path_device("/"); + rootdn = of_find_node_by_path("/"); if (rootdn) { - tmp = get_property(rootdn, "model", NULL); + tmp = of_get_property(rootdn, "model", NULL); if (tmp) { model = tmp; /* Skip "IBM," - see platforms/iseries/dt.c */ if (firmware_has_feature(FW_FEATURE_ISERIES)) model += 4; } - tmp = get_property(rootdn, "system-id", NULL); + tmp = of_get_property(rootdn, "system-id", NULL); if (tmp) { system_id = tmp; /* Skip "IBM," - see platforms/iseries/dt.c */ if (firmware_has_feature(FW_FEATURE_ISERIES)) system_id += 4; } - lp_index_ptr = get_property(rootdn, "ibm,partition-no", NULL); + lp_index_ptr = of_get_property(rootdn, "ibm,partition-no", + NULL); if (lp_index_ptr) lp_index = *lp_index_ptr; + of_node_put(rootdn); } seq_printf(m, "serial_number=%s\n", system_id); seq_printf(m, "system_type=%s\n", model); diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c index a24b09c27718..704375bda73a 100644 --- a/arch/powerpc/kernel/machine_kexec_64.c +++ b/arch/powerpc/kernel/machine_kexec_64.c @@ -72,8 +72,8 @@ int default_machine_kexec_prepare(struct kimage *image) /* We also should not overwrite the tce tables */ for (node = of_find_node_by_type(NULL, "pci"); node != NULL; node = of_find_node_by_type(node, "pci")) { - basep = get_property(node, "linux,tce-base", NULL); - sizep = get_property(node, "linux,tce-size", NULL); + basep = of_get_property(node, "linux,tce-base", NULL); + sizep = of_get_property(node, "linux,tce-size", NULL); if (basep == NULL || sizep == NULL) continue; @@ -294,19 +294,19 @@ static unsigned long htab_base, kernel_end; static struct property htab_base_prop = { .name = "linux,htab-base", .length = sizeof(unsigned long), - .value = (unsigned char *)&htab_base, + .value = &htab_base, }; static struct property htab_size_prop = { .name = "linux,htab-size", .length = sizeof(unsigned long), - .value = (unsigned char *)&htab_size_bytes, + .value = &htab_size_bytes, }; static struct property kernel_end_prop = { .name = "linux,kernel-end", .length = sizeof(unsigned long), - .value = (unsigned char *)&kernel_end, + .value = &kernel_end, }; static void __init export_htab_values(void) @@ -335,7 +335,7 @@ static void __init export_htab_values(void) static struct property crashk_base_prop = { .name = "linux,crashkernel-base", .length = sizeof(unsigned long), - .value = (unsigned char *)&crashk_res.start, + .value = &crashk_res.start, }; static unsigned long crashk_size; @@ -343,7 +343,7 @@ static unsigned long crashk_size; static struct property crashk_size_prop = { .name = "linux,crashkernel-size", .length = sizeof(unsigned long), - .value = (unsigned char *)&crashk_size, + .value = &crashk_size, }; static void __init export_crashk_values(void) diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index 412bea3cf813..98decf8ebff4 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -734,10 +734,6 @@ _GLOBAL(abs) sub r3,r3,r4 blr -_GLOBAL(_get_SP) - mr r3,r1 /* Close enough */ - blr - /* * Create a kernel thread * kernel_thread(fn, arg, flags) diff --git a/arch/powerpc/kernel/of_device.c b/arch/powerpc/kernel/of_device.c index e921514e655b..0c8ea7659d92 100644 --- a/arch/powerpc/kernel/of_device.c +++ b/arch/powerpc/kernel/of_device.c @@ -120,6 +120,117 @@ void of_device_unregister(struct of_device *ofdev) } +static ssize_t of_device_get_modalias(struct of_device *ofdev, + char *str, ssize_t len) +{ + const char *compat; + int cplen, i; + ssize_t tsize, csize, repend; + + /* Name & Type */ + csize = snprintf(str, len, "of:N%sT%s", + ofdev->node->name, ofdev->node->type); + + /* Get compatible property if any */ + compat = of_get_property(ofdev->node, "compatible", &cplen); + if (!compat) + return csize; + + /* Find true end (we tolerate multiple \0 at the end */ + for (i=(cplen-1); i>=0 && !compat[i]; i--) + cplen--; + if (!cplen) + return csize; + cplen++; + + /* Check space (need cplen+1 chars including final \0) */ + tsize = csize + cplen; + repend = tsize; + + if (csize>=len) /* @ the limit, all is already filled */ + return tsize; + + if (tsize>=len) { /* limit compat list */ + cplen = len-csize-1; + repend = len; + } + + /* Copy and do char replacement */ + memcpy(&str[csize+1], compat, cplen); + for (i=csize; i<repend; i++) { + char c = str[i]; + if (c=='\0') + str[i] = 'C'; + else if (c==' ') + str[i] = '_'; + } + + return tsize; +} + +int of_device_uevent(struct device *dev, + char **envp, int num_envp, char *buffer, int buffer_size) +{ + struct of_device *ofdev; + const char *compat; + int i = 0, length = 0, seen = 0, cplen, sl; + + if (!dev) + return -ENODEV; + + ofdev = to_of_device(dev); + + if (add_uevent_var(envp, num_envp, &i, + buffer, buffer_size, &length, + "OF_NAME=%s", ofdev->node->name)) + return -ENOMEM; + + if (add_uevent_var(envp, num_envp, &i, + buffer, buffer_size, &length, + "OF_TYPE=%s", ofdev->node->type)) + return -ENOMEM; + + /* Since the compatible field can contain pretty much anything + * it's not really legal to split it out with commas. We split it + * up using a number of environment variables instead. */ + + compat = of_get_property(ofdev->node, "compatible", &cplen); + while (compat && *compat && cplen > 0) { + if (add_uevent_var(envp, num_envp, &i, + buffer, buffer_size, &length, + "OF_COMPATIBLE_%d=%s", seen, compat)) + return -ENOMEM; + + sl = strlen (compat) + 1; + compat += sl; + cplen -= sl; + seen++; + } + + if (add_uevent_var(envp, num_envp, &i, + buffer, buffer_size, &length, + "OF_COMPATIBLE_N=%d", seen)) + return -ENOMEM; + + /* modalias is trickier, we add it in 2 steps */ + if (add_uevent_var(envp, num_envp, &i, + buffer, buffer_size, &length, + "MODALIAS=")) + return -ENOMEM; + + sl = of_device_get_modalias(ofdev, &buffer[length-1], + buffer_size-length); + if (sl >= (buffer_size-length)) + return -ENOMEM; + + length += sl; + + envp[i] = NULL; + + return 0; +} + + EXPORT_SYMBOL(of_match_node); EXPORT_SYMBOL(of_match_device); EXPORT_SYMBOL(of_device_register); @@ -127,3 +238,4 @@ EXPORT_SYMBOL(of_device_unregister); EXPORT_SYMBOL(of_dev_get); EXPORT_SYMBOL(of_dev_put); EXPORT_SYMBOL(of_release_dev); +EXPORT_SYMBOL(of_device_uevent); diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c index 9e7a4d249f03..908ed7926db4 100644 --- a/arch/powerpc/kernel/of_platform.c +++ b/arch/powerpc/kernel/of_platform.c @@ -133,6 +133,7 @@ static int of_platform_device_resume(struct device * dev) struct bus_type of_platform_bus_type = { .name = "of_platform", .match = of_platform_bus_match, + .uevent = of_device_uevent, .probe = of_platform_device_probe, .remove = of_platform_device_remove, .suspend = of_platform_device_suspend, @@ -177,7 +178,7 @@ static void of_platform_make_bus_id(struct of_device *dev) * and 'D' for MMIO DCRs. */ #ifdef CONFIG_PPC_DCR - reg = get_property(node, "dcr-reg", NULL); + reg = of_get_property(node, "dcr-reg", NULL); if (reg) { #ifdef CONFIG_PPC_DCR_NATIVE snprintf(name, BUS_ID_SIZE, "d%x.%s", @@ -197,7 +198,7 @@ static void of_platform_make_bus_id(struct of_device *dev) /* * For MMIO, get the physical address */ - reg = get_property(node, "reg", NULL); + reg = of_get_property(node, "reg", NULL); if (reg) { addr = of_translate_address(node, reg); if (addr != OF_BAD_ADDR) { diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c index d8ef2e100505..f022862de344 100644 --- a/arch/powerpc/kernel/pci_32.c +++ b/arch/powerpc/kernel/pci_32.c @@ -637,7 +637,7 @@ make_one_node_map(struct device_node* node, u8 pci_bus) if (pci_bus >= pci_bus_count) return; - bus_range = get_property(node, "bus-range", &len); + bus_range = of_get_property(node, "bus-range", &len); if (bus_range == NULL || len < 2 * sizeof(int)) { printk(KERN_WARNING "Can't get bus-range for %s, " "assuming it starts at 0\n", node->full_name); @@ -649,17 +649,20 @@ make_one_node_map(struct device_node* node, u8 pci_bus) struct pci_dev* dev; const unsigned int *class_code, *reg; - class_code = get_property(node, "class-code", NULL); + class_code = of_get_property(node, "class-code", NULL); if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI && (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) continue; - reg = get_property(node, "reg", NULL); + reg = of_get_property(node, "reg", NULL); if (!reg) continue; - dev = pci_find_slot(pci_bus, ((reg[0] >> 8) & 0xff)); - if (!dev || !dev->subordinate) + dev = pci_get_bus_and_slot(pci_bus, ((reg[0] >> 8) & 0xff)); + if (!dev || !dev->subordinate) { + pci_dev_put(dev); continue; + } make_one_node_map(node, dev->subordinate->number); + pci_dev_put(dev); } } @@ -669,6 +672,7 @@ pcibios_make_OF_bus_map(void) int i; struct pci_controller* hose; struct property *map_prop; + struct device_node *dn; pci_to_OF_bus_map = kmalloc(pci_bus_count, GFP_KERNEL); if (!pci_to_OF_bus_map) { @@ -690,12 +694,13 @@ pcibios_make_OF_bus_map(void) continue; make_one_node_map(node, hose->first_busno); } - map_prop = of_find_property(find_path_device("/"), - "pci-OF-bus-map", NULL); + dn = of_find_node_by_path("/"); + map_prop = of_find_property(dn, "pci-OF-bus-map", NULL); if (map_prop) { BUG_ON(pci_bus_count > map_prop->length); memcpy(map_prop->value, pci_to_OF_bus_map, pci_bus_count); } + of_node_put(dn); #ifdef DEBUG printk("PCI->OF bus map:\n"); for (i=0; i<pci_bus_count; i++) { @@ -724,7 +729,7 @@ scan_OF_pci_childs(struct device_node* node, pci_OF_scan_iterator filter, void* * a fake root for all functions of a multi-function device, * we go down them as well. */ - class_code = get_property(node, "class-code", NULL); + class_code = of_get_property(node, "class-code", NULL); if ((!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI && (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) && strcmp(node->name, "multifunc-device")) @@ -744,7 +749,7 @@ static struct device_node *scan_OF_for_pci_dev(struct device_node *parent, unsigned int psize; while ((np = of_get_next_child(parent, np)) != NULL) { - reg = get_property(np, "reg", &psize); + reg = of_get_property(np, "reg", &psize); if (reg == NULL || psize < 4) continue; if (((reg[0] >> 8) & 0xff) == devfn) @@ -859,7 +864,7 @@ pci_device_from_OF_node(struct device_node* node, u8* bus, u8* devfn) if (!scan_OF_pci_childs(((struct device_node*)hose->arch_data)->child, find_OF_pci_device_filter, (void *)node)) return -ENODEV; - reg = get_property(node, "reg", NULL); + reg = of_get_property(node, "reg", NULL); if (!reg) return -ENODEV; *bus = (reg[0] >> 16) & 0xff; @@ -895,14 +900,14 @@ pci_process_bridge_OF_ranges(struct pci_controller *hose, int rlen = 0, orig_rlen; int memno = 0; struct resource *res; - int np, na = prom_n_addr_cells(dev); + int np, na = of_n_addr_cells(dev); np = na + 5; /* First we try to merge ranges to fix a problem with some pmacs * that can have more than 3 ranges, fortunately using contiguous * addresses -- BenH */ - dt_ranges = get_property(dev, "ranges", &rlen); + dt_ranges = of_get_property(dev, "ranges", &rlen); if (!dt_ranges) return; /* Sanity check, though hopefully that never happens */ @@ -1006,14 +1011,19 @@ void __init pci_create_OF_bus_map(void) { struct property* of_prop; - + struct device_node *dn; + of_prop = (struct property*) alloc_bootmem(sizeof(struct property) + 256); - if (of_prop && find_path_device("/")) { + if (!of_prop) + return; + dn = of_find_node_by_path("/"); + if (dn) { memset(of_prop, -1, sizeof(struct property) + 256); of_prop->name = "pci-OF-bus-map"; of_prop->length = 256; - of_prop->value = (unsigned char *)&of_prop[1]; - prom_add_property(find_path_device("/"), of_prop); + of_prop->value = &of_prop[1]; + prom_add_property(dn, of_prop); + of_node_put(dn); } } diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index 7e97d71a5f8f..60d7d4baa227 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -61,8 +61,7 @@ void iSeries_pcibios_init(void); LIST_HEAD(hose_list); -struct dma_mapping_ops *pci_dma_ops; -EXPORT_SYMBOL(pci_dma_ops); +static struct dma_mapping_ops *pci_dma_ops; int global_phb_number; /* Global phb counter */ @@ -70,6 +69,17 @@ int global_phb_number; /* Global phb counter */ struct pci_dev *ppc64_isabridge_dev = NULL; EXPORT_SYMBOL_GPL(ppc64_isabridge_dev); +void set_pci_dma_ops(struct dma_mapping_ops *dma_ops) +{ + pci_dma_ops = dma_ops; +} + +struct dma_mapping_ops *get_pci_dma_ops(void) +{ + return pci_dma_ops; +} +EXPORT_SYMBOL(get_pci_dma_ops); + static void fixup_broken_pcnet32(struct pci_dev* dev) { if ((dev->class>>8 == PCI_CLASS_NETWORK_ETHERNET)) { @@ -258,7 +268,7 @@ static u32 get_int_prop(struct device_node *np, const char *name, u32 def) const u32 *prop; int len; - prop = get_property(np, name, &len); + prop = of_get_property(np, name, &len); if (prop && len >= 4) return *prop; return def; @@ -291,7 +301,7 @@ static void pci_parse_of_addrs(struct device_node *node, struct pci_dev *dev) u32 i; int proplen; - addrs = get_property(node, "assigned-addresses", &proplen); + addrs = of_get_property(node, "assigned-addresses", &proplen); if (!addrs) return; DBG(" parse addresses (%d bytes) @ %p\n", proplen, addrs); @@ -333,7 +343,7 @@ struct pci_dev *of_create_pci_dev(struct device_node *node, dev = kzalloc(sizeof(struct pci_dev), GFP_KERNEL); if (!dev) return NULL; - type = get_property(node, "device_type", NULL); + type = of_get_property(node, "device_type", NULL); if (type == NULL) type = ""; @@ -397,7 +407,7 @@ void __devinit of_scan_bus(struct device_node *node, while ((child = of_get_next_child(node, child)) != NULL) { DBG(" * %s\n", child->full_name); - reg = get_property(child, "reg", ®len); + reg = of_get_property(child, "reg", ®len); if (reg == NULL || reglen < 20) continue; devfn = (reg[0] >> 8) & 0xff; @@ -430,13 +440,13 @@ void __devinit of_scan_pci_bridge(struct device_node *node, DBG("of_scan_pci_bridge(%s)\n", node->full_name); /* parse bus-range property */ - busrange = get_property(node, "bus-range", &len); + busrange = of_get_property(node, "bus-range", &len); if (busrange == NULL || len != 8) { printk(KERN_DEBUG "Can't get bus-range for PCI-PCI bridge %s\n", node->full_name); return; } - ranges = get_property(node, "ranges", &len); + ranges = of_get_property(node, "ranges", &len); if (ranges == NULL) { printk(KERN_DEBUG "Can't get ranges for PCI-PCI bridge %s\n", node->full_name); @@ -900,7 +910,7 @@ static void __devinit pci_process_ISA_OF_ranges(struct device_node *isa_node, unsigned int size; int rlen = 0; - range = get_property(isa_node, "ranges", &rlen); + range = of_get_property(isa_node, "ranges", &rlen); if (range == NULL || (rlen < sizeof(struct isa_range))) { printk(KERN_ERR "no ISA ranges or unexpected isa range size," "mapping 64k\n"); @@ -947,7 +957,7 @@ void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose, int rlen = 0; int memno = 0; struct resource *res; - int np, na = prom_n_addr_cells(dev); + int np, na = of_n_addr_cells(dev); unsigned long pci_addr, cpu_phys_addr; np = na + 5; @@ -960,7 +970,7 @@ void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose, * (size depending on dev->n_addr_cells) * cells 4+5 or 5+6: the size of the range */ - ranges = get_property(dev, "ranges", &rlen); + ranges = of_get_property(dev, "ranges", &rlen); if (ranges == NULL) return; hose->io_base_phys = 0; diff --git a/arch/powerpc/kernel/pci_dn.c b/arch/powerpc/kernel/pci_dn.c index 68df018dae0e..d7d36df9c053 100644 --- a/arch/powerpc/kernel/pci_dn.c +++ b/arch/powerpc/kernel/pci_dn.c @@ -40,7 +40,8 @@ static void * __devinit update_dn_pci_info(struct device_node *dn, void *data) { struct pci_controller *phb = data; - const int *type = get_property(dn, "ibm,pci-config-space-type", NULL); + const int *type = + of_get_property(dn, "ibm,pci-config-space-type", NULL); const u32 *regs; struct pci_dn *pdn; @@ -54,14 +55,14 @@ static void * __devinit update_dn_pci_info(struct device_node *dn, void *data) dn->data = pdn; pdn->node = dn; pdn->phb = phb; - regs = get_property(dn, "reg", NULL); + regs = of_get_property(dn, "reg", NULL); if (regs) { /* First register entry is addr (00BBSS00) */ pdn->busno = (regs[0] >> 16) & 0xff; pdn->devfn = (regs[0] >> 8) & 0xff; } if (firmware_has_feature(FW_FEATURE_ISERIES)) { - const u32 *busp = get_property(dn, "linux,subbus", NULL); + const u32 *busp = of_get_property(dn, "linux,subbus", NULL); if (busp) pdn->bussubno = *busp; } @@ -100,7 +101,7 @@ void *traverse_pci_devices(struct device_node *start, traverse_func pre, u32 class; nextdn = NULL; - classp = get_property(dn, "class-code", NULL); + classp = of_get_property(dn, "class-code", NULL); class = classp ? *classp : 0; if (pre && ((ret = pre(dn, data)) != NULL)) diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index 2f8e9c02c92a..ff252aaead12 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -20,7 +20,6 @@ #include <asm/processor.h> #include <asm/uaccess.h> #include <asm/io.h> -#include <asm/ide.h> #include <asm/atomic.h> #include <asm/checksum.h> #include <asm/pgtable.h> diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index e53b2988d1bf..e509aae2feb3 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -305,9 +305,7 @@ struct task_struct *__switch_to(struct task_struct *prev, set_dabr(new->thread.dabr); __get_cpu_var(current_dabr) = new->thread.dabr; } - - flush_tlb_pending(); -#endif +#endif /* CONFIG_PPC64 */ new_thread = &new->thread; old_thread = ¤t->thread; @@ -402,11 +400,11 @@ static void printbits(unsigned long val, struct regbit *bits) } #ifdef CONFIG_PPC64 -#define REG "%016lX" +#define REG "%016lx" #define REGS_PER_LINE 4 #define LAST_VOLATILE 13 #else -#define REG "%08lX" +#define REG "%08lx" #define REGS_PER_LINE 8 #define LAST_VOLATILE 12 #endif @@ -421,7 +419,7 @@ void show_regs(struct pt_regs * regs) regs, regs->trap, print_tainted(), init_utsname()->release); printk("MSR: "REG" ", regs->msr); printbits(regs->msr, msr_bits); - printk(" CR: %08lX XER: %08lX\n", regs->ccr, regs->xer); + printk(" CR: %08lx XER: %08lx\n", regs->ccr, regs->xer); trap = TRAP(regs); if (trap == 0x300 || trap == 0x600) printk("DAR: "REG", DSISR: "REG"\n", regs->dar, regs->dsisr); @@ -572,7 +570,6 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp, kregs->nip = *((unsigned long *)ret_from_fork); #else kregs->nip = (unsigned long)ret_from_fork; - p->thread.last_syscall = -1; #endif return 0; @@ -823,6 +820,35 @@ out: return error; } +#ifdef CONFIG_IRQSTACKS +static inline int valid_irq_stack(unsigned long sp, struct task_struct *p, + unsigned long nbytes) +{ + unsigned long stack_page; + unsigned long cpu = task_cpu(p); + + /* + * Avoid crashing if the stack has overflowed and corrupted + * task_cpu(p), which is in the thread_info struct. + */ + if (cpu < NR_CPUS && cpu_possible(cpu)) { + stack_page = (unsigned long) hardirq_ctx[cpu]; + if (sp >= stack_page + sizeof(struct thread_struct) + && sp <= stack_page + THREAD_SIZE - nbytes) + return 1; + + stack_page = (unsigned long) softirq_ctx[cpu]; + if (sp >= stack_page + sizeof(struct thread_struct) + && sp <= stack_page + THREAD_SIZE - nbytes) + return 1; + } + return 0; +} + +#else +#define valid_irq_stack(sp, p, nb) 0 +#endif /* CONFIG_IRQSTACKS */ + int validate_sp(unsigned long sp, struct task_struct *p, unsigned long nbytes) { @@ -832,19 +858,7 @@ int validate_sp(unsigned long sp, struct task_struct *p, && sp <= stack_page + THREAD_SIZE - nbytes) return 1; -#ifdef CONFIG_IRQSTACKS - stack_page = (unsigned long) hardirq_ctx[task_cpu(p)]; - if (sp >= stack_page + sizeof(struct thread_struct) - && sp <= stack_page + THREAD_SIZE - nbytes) - return 1; - - stack_page = (unsigned long) softirq_ctx[task_cpu(p)]; - if (sp >= stack_page + sizeof(struct thread_struct) - && sp <= stack_page + THREAD_SIZE - nbytes) - return 1; -#endif - - return 0; + return valid_irq_stack(sp, p, nbytes); } #ifdef CONFIG_PPC64 diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 8d52b23348bd..caef555f2dc0 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -390,18 +390,19 @@ static unsigned long __init unflatten_dt_node(unsigned long mem, if (allnextpp) { pp->name = "name"; pp->length = sz; - pp->value = (unsigned char *)(pp + 1); + pp->value = pp + 1; *prev_pp = pp; prev_pp = &pp->next; memcpy(pp->value, ps, sz - 1); ((char *)pp->value)[sz - 1] = 0; - DBG("fixed up name for %s -> %s\n", pathp, pp->value); + DBG("fixed up name for %s -> %s\n", pathp, + (char *)pp->value); } } if (allnextpp) { *prev_pp = NULL; - np->name = get_property(np, "name", NULL); - np->type = get_property(np, "device_type", NULL); + np->name = of_get_property(np, "name", NULL); + np->type = of_get_property(np, "device_type", NULL); if (!np->name) np->name = "<NULL>"; @@ -719,6 +720,7 @@ static int __init early_init_dt_scan_chosen(unsigned long node, const char *uname, int depth, void *data) { unsigned long *lprop; + u32 *prop; unsigned long l; char *p; @@ -760,6 +762,22 @@ static int __init early_init_dt_scan_chosen(unsigned long node, crashk_res.end = crashk_res.start + *lprop - 1; #endif +#ifdef CONFIG_BLK_DEV_INITRD + DBG("Looking for initrd properties... "); + prop = of_get_flat_dt_prop(node, "linux,initrd-start", &l); + if (prop) { + initrd_start = (unsigned long)__va(of_read_ulong(prop, l/4)); + prop = of_get_flat_dt_prop(node, "linux,initrd-end", &l); + if (prop) { + initrd_end = (unsigned long)__va(of_read_ulong(prop, l/4)); + initrd_below_start_ok = 1; + } else { + initrd_start = 0; + } + } + DBG("initrd_start=0x%lx initrd_end=0x%lx\n", initrd_start, initrd_end); +#endif /* CONFIG_BLK_DEV_INITRD */ + /* Retreive command line */ p = of_get_flat_dt_prop(node, "bootargs", &l); if (p != NULL && l > 0) @@ -926,6 +944,12 @@ static void __init early_reserve_mem(void) self_size = initial_boot_params->totalsize; lmb_reserve(self_base, self_size); +#ifdef CONFIG_BLK_DEV_INITRD + /* then reserve the initrd, if any */ + if (initrd_start && (initrd_end > initrd_start)) + lmb_reserve(__pa(initrd_start), initrd_end - initrd_start); +#endif /* CONFIG_BLK_DEV_INITRD */ + #ifdef CONFIG_PPC32 /* * Handle the case where we might be booting from an old kexec @@ -954,9 +978,6 @@ static void __init early_reserve_mem(void) size = *(reserve_map++); if (size == 0) break; - /* skip if the reservation is for the blob */ - if (base == self_base && size == self_size) - continue; DBG("reserving: %llx -> %llx\n", base, size); lmb_reserve(base, size); } @@ -1021,102 +1042,46 @@ void __init early_init_devtree(void *params) #undef printk -int -prom_n_addr_cells(struct device_node* np) +int of_n_addr_cells(struct device_node* np) { const int *ip; do { if (np->parent) np = np->parent; - ip = get_property(np, "#address-cells", NULL); + ip = of_get_property(np, "#address-cells", NULL); if (ip != NULL) return *ip; } while (np->parent); /* No #address-cells property for the root node, default to 1 */ return 1; } -EXPORT_SYMBOL(prom_n_addr_cells); +EXPORT_SYMBOL(of_n_addr_cells); -int -prom_n_size_cells(struct device_node* np) +int of_n_size_cells(struct device_node* np) { const int* ip; do { if (np->parent) np = np->parent; - ip = get_property(np, "#size-cells", NULL); + ip = of_get_property(np, "#size-cells", NULL); if (ip != NULL) return *ip; } while (np->parent); /* No #size-cells property for the root node, default to 1 */ return 1; } -EXPORT_SYMBOL(prom_n_size_cells); - -/** - * Construct and return a list of the device_nodes with a given name. - */ -struct device_node *find_devices(const char *name) -{ - struct device_node *head, **prevp, *np; - - prevp = &head; - for (np = allnodes; np != 0; np = np->allnext) { - if (np->name != 0 && strcasecmp(np->name, name) == 0) { - *prevp = np; - prevp = &np->next; - } - } - *prevp = NULL; - return head; -} -EXPORT_SYMBOL(find_devices); - -/** - * Construct and return a list of the device_nodes with a given type. - */ -struct device_node *find_type_devices(const char *type) -{ - struct device_node *head, **prevp, *np; - - prevp = &head; - for (np = allnodes; np != 0; np = np->allnext) { - if (np->type != 0 && strcasecmp(np->type, type) == 0) { - *prevp = np; - prevp = &np->next; - } - } - *prevp = NULL; - return head; -} -EXPORT_SYMBOL(find_type_devices); - -/** - * Returns all nodes linked together - */ -struct device_node *find_all_nodes(void) -{ - struct device_node *head, **prevp, *np; - - prevp = &head; - for (np = allnodes; np != 0; np = np->allnext) { - *prevp = np; - prevp = &np->next; - } - *prevp = NULL; - return head; -} -EXPORT_SYMBOL(find_all_nodes); +EXPORT_SYMBOL(of_n_size_cells); /** Checks if the given "compat" string matches one of the strings in * the device's "compatible" property */ -int device_is_compatible(const struct device_node *device, const char *compat) +int of_device_is_compatible(const struct device_node *device, + const char *compat) { const char* cp; int cplen, l; - cp = get_property(device, "compatible", &cplen); + cp = of_get_property(device, "compatible", &cplen); if (cp == NULL) return 0; while (cplen > 0) { @@ -1129,7 +1094,7 @@ int device_is_compatible(const struct device_node *device, const char *compat) return 0; } -EXPORT_SYMBOL(device_is_compatible); +EXPORT_SYMBOL(of_device_is_compatible); /** @@ -1143,51 +1108,13 @@ int machine_is_compatible(const char *compat) root = of_find_node_by_path("/"); if (root) { - rc = device_is_compatible(root, compat); + rc = of_device_is_compatible(root, compat); of_node_put(root); } return rc; } EXPORT_SYMBOL(machine_is_compatible); -/** - * Construct and return a list of the device_nodes with a given type - * and compatible property. - */ -struct device_node *find_compatible_devices(const char *type, - const char *compat) -{ - struct device_node *head, **prevp, *np; - - prevp = &head; - for (np = allnodes; np != 0; np = np->allnext) { - if (type != NULL - && !(np->type != 0 && strcasecmp(np->type, type) == 0)) - continue; - if (device_is_compatible(np, compat)) { - *prevp = np; - prevp = &np->next; - } - } - *prevp = NULL; - return head; -} -EXPORT_SYMBOL(find_compatible_devices); - -/** - * Find the device_node with a given full_name. - */ -struct device_node *find_path_device(const char *path) -{ - struct device_node *np; - - for (np = allnodes; np != 0; np = np->allnext) - if (np->full_name != 0 && strcasecmp(np->full_name, path) == 0) - return np; - return NULL; -} -EXPORT_SYMBOL(find_path_device); - /******* * * New implementation of the OF "find" APIs, return a refcounted @@ -1280,7 +1207,7 @@ struct device_node *of_find_compatible_node(struct device_node *from, if (type != NULL && !(np->type != 0 && strcasecmp(np->type, type) == 0)) continue; - if (device_is_compatible(np, compatible) && of_node_get(np)) + if (of_device_is_compatible(np, compatible) && of_node_get(np)) break; } of_node_put(from); @@ -1527,8 +1454,8 @@ static int of_finish_dynamic_node(struct device_node *node) int err = 0; const phandle *ibm_phandle; - node->name = get_property(node, "name", NULL); - node->type = get_property(node, "device_type", NULL); + node->name = of_get_property(node, "name", NULL); + node->type = of_get_property(node, "device_type", NULL); if (!parent) { err = -ENODEV; @@ -1542,7 +1469,7 @@ static int of_finish_dynamic_node(struct device_node *node) return -ENODEV; /* fix up new node's linux_phandle field */ - if ((ibm_phandle = get_property(node, "ibm,phandle", NULL))) + if ((ibm_phandle = of_get_property(node, "ibm,phandle", NULL))) node->linux_phandle = *ibm_phandle; out: @@ -1605,13 +1532,13 @@ EXPORT_SYMBOL(of_find_property); * Find a property with a given name for a given node * and return the value. */ -const void *get_property(const struct device_node *np, const char *name, +const void *of_get_property(const struct device_node *np, const char *name, int *lenp) { struct property *pp = of_find_property(np,name,lenp); return pp ? pp->value : NULL; } -EXPORT_SYMBOL(get_property); +EXPORT_SYMBOL(of_get_property); /* * Add a property to a node @@ -1742,10 +1669,10 @@ struct device_node *of_get_cpu_node(int cpu, unsigned int *thread) /* Check for ibm,ppc-interrupt-server#s. If it doesn't exist * fallback to "reg" property and assume no threads */ - intserv = get_property(np, "ibm,ppc-interrupt-server#s", + intserv = of_get_property(np, "ibm,ppc-interrupt-server#s", &plen); if (intserv == NULL) { - const u32 *reg = get_property(np, "reg", NULL); + const u32 *reg = of_get_property(np, "reg", NULL); if (reg == NULL) continue; if (*reg == hardid) { diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 4fb5938ce6d3..e27d9d1b6e67 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -2035,39 +2035,50 @@ static void __init fixup_device_tree_maple(void) #endif #ifdef CONFIG_PPC_CHRP -/* Pegasos and BriQ lacks the "ranges" property in the isa node */ +/* + * Pegasos and BriQ lacks the "ranges" property in the isa node + * Pegasos needs decimal IRQ 14/15, not hexadecimal + */ static void __init fixup_device_tree_chrp(void) { - phandle isa; - u32 isa_ranges[6]; + phandle ph; + u32 prop[6]; u32 rloc = 0x01006000; /* IO space; PCI device = 12 */ char *name; int rc; name = "/pci@80000000/isa@c"; - isa = call_prom("finddevice", 1, 1, ADDR(name)); - if (!PHANDLE_VALID(isa)) { + ph = call_prom("finddevice", 1, 1, ADDR(name)); + if (!PHANDLE_VALID(ph)) { name = "/pci@ff500000/isa@6"; - isa = call_prom("finddevice", 1, 1, ADDR(name)); + ph = call_prom("finddevice", 1, 1, ADDR(name)); rloc = 0x01003000; /* IO space; PCI device = 6 */ } - if (!PHANDLE_VALID(isa)) - return; - - rc = prom_getproplen(isa, "ranges"); - if (rc != 0 && rc != PROM_ERROR) - return; - - prom_printf("Fixing up missing ISA range on Pegasos...\n"); + if (PHANDLE_VALID(ph)) { + rc = prom_getproplen(ph, "ranges"); + if (rc == 0 || rc == PROM_ERROR) { + prom_printf("Fixing up missing ISA range on Pegasos...\n"); + + prop[0] = 0x1; + prop[1] = 0x0; + prop[2] = rloc; + prop[3] = 0x0; + prop[4] = 0x0; + prop[5] = 0x00010000; + prom_setprop(ph, name, "ranges", prop, sizeof(prop)); + } + } - isa_ranges[0] = 0x1; - isa_ranges[1] = 0x0; - isa_ranges[2] = rloc; - isa_ranges[3] = 0x0; - isa_ranges[4] = 0x0; - isa_ranges[5] = 0x00010000; - prom_setprop(isa, name, "ranges", - isa_ranges, sizeof(isa_ranges)); + name = "/pci@80000000/ide@C,1"; + ph = call_prom("finddevice", 1, 1, ADDR(name)); + if (PHANDLE_VALID(ph)) { + prom_printf("Fixing up IDE interrupt on Pegasos...\n"); + prop[0] = 14; + prop[1] = 0x0; + prop[2] = 15; + prop[3] = 0x0; + prom_setprop(ph, name, "interrupts", prop, 4*sizeof(u32)); + } } #else #define fixup_device_tree_chrp() diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c index 91b443c9a488..aa40a5307294 100644 --- a/arch/powerpc/kernel/prom_parse.c +++ b/arch/powerpc/kernel/prom_parse.c @@ -68,9 +68,9 @@ static void of_bus_default_count_cells(struct device_node *dev, int *addrc, int *sizec) { if (addrc) - *addrc = prom_n_addr_cells(dev); + *addrc = of_n_addr_cells(dev); if (sizec) - *sizec = prom_n_size_cells(dev); + *sizec = of_n_size_cells(dev); } static u64 of_bus_default_map(u32 *addr, const u32 *range, @@ -196,7 +196,7 @@ const u32 *of_get_pci_address(struct device_node *dev, int bar_no, u64 *size, return NULL; /* Get "reg" or "assigned-addresses" property */ - prop = get_property(dev, bus->addresses, &psize); + prop = of_get_property(dev, bus->addresses, &psize); if (prop == NULL) return NULL; psize /= 4; @@ -438,7 +438,7 @@ static int of_translate_one(struct device_node *parent, struct of_bus *bus, * to translate addresses that aren't supposed to be translated in * the first place. --BenH. */ - ranges = get_property(parent, "ranges", &rlen); + ranges = of_get_property(parent, "ranges", &rlen); if (ranges == NULL || rlen == 0) { offset = of_read_number(addr, na); memset(addr, 0, pna * 4); @@ -578,7 +578,7 @@ const u32 *of_get_address(struct device_node *dev, int index, u64 *size, return NULL; /* Get "reg" or "assigned-addresses" property */ - prop = get_property(dev, bus->addresses, &psize); + prop = of_get_property(dev, bus->addresses, &psize); if (prop == NULL) return NULL; psize /= 4; @@ -650,17 +650,17 @@ void of_parse_dma_window(struct device_node *dn, const void *dma_window_prop, /* busno is always one cell */ *busno = *(dma_window++); - prop = get_property(dn, "ibm,#dma-address-cells", NULL); + prop = of_get_property(dn, "ibm,#dma-address-cells", NULL); if (!prop) - prop = get_property(dn, "#address-cells", NULL); + prop = of_get_property(dn, "#address-cells", NULL); - cells = prop ? *(u32 *)prop : prom_n_addr_cells(dn); + cells = prop ? *(u32 *)prop : of_n_addr_cells(dn); *phys = of_read_number(dma_window, cells); dma_window += cells; - prop = get_property(dn, "ibm,#dma-size-cells", NULL); - cells = prop ? *(u32 *)prop : prom_n_size_cells(dn); + prop = of_get_property(dn, "ibm,#dma-size-cells", NULL); + cells = prop ? *(u32 *)prop : of_n_size_cells(dn); *size = of_read_number(dma_window, cells); } @@ -680,7 +680,7 @@ static struct device_node *of_irq_find_parent(struct device_node *child) return NULL; do { - parp = get_property(child, "interrupt-parent", NULL); + parp = of_get_property(child, "interrupt-parent", NULL); if (parp == NULL) p = of_get_parent(child); else { @@ -691,7 +691,7 @@ static struct device_node *of_irq_find_parent(struct device_node *child) } of_node_put(child); child = p; - } while (p && get_property(p, "#interrupt-cells", NULL) == NULL); + } while (p && of_get_property(p, "#interrupt-cells", NULL) == NULL); return p; } @@ -716,7 +716,7 @@ void of_irq_map_init(unsigned int flags) struct device_node *np; for(np = NULL; (np = of_find_all_nodes(np)) != NULL;) { - if (get_property(np, "interrupt-controller", NULL) + if (of_get_property(np, "interrupt-controller", NULL) == NULL) continue; /* Skip /chosen/interrupt-controller */ @@ -755,7 +755,7 @@ int of_irq_map_raw(struct device_node *parent, const u32 *intspec, u32 ointsize, * is none, we are nice and just walk up the tree */ do { - tmp = get_property(ipar, "#interrupt-cells", NULL); + tmp = of_get_property(ipar, "#interrupt-cells", NULL); if (tmp != NULL) { intsize = *tmp; break; @@ -779,7 +779,7 @@ int of_irq_map_raw(struct device_node *parent, const u32 *intspec, u32 ointsize, */ old = of_node_get(ipar); do { - tmp = get_property(old, "#address-cells", NULL); + tmp = of_get_property(old, "#address-cells", NULL); tnode = of_get_parent(old); of_node_put(old); old = tnode; @@ -795,7 +795,8 @@ int of_irq_map_raw(struct device_node *parent, const u32 *intspec, u32 ointsize, /* Now check if cursor is an interrupt-controller and if it is * then we are done */ - if (get_property(ipar, "interrupt-controller", NULL) != NULL) { + if (of_get_property(ipar, "interrupt-controller", NULL) != + NULL) { DBG(" -> got it !\n"); memcpy(out_irq->specifier, intspec, intsize * sizeof(u32)); @@ -806,7 +807,7 @@ int of_irq_map_raw(struct device_node *parent, const u32 *intspec, u32 ointsize, } /* Now look for an interrupt-map */ - imap = get_property(ipar, "interrupt-map", &imaplen); + imap = of_get_property(ipar, "interrupt-map", &imaplen); /* No interrupt map, check for an interrupt parent */ if (imap == NULL) { DBG(" -> no map, getting parent\n"); @@ -816,7 +817,7 @@ int of_irq_map_raw(struct device_node *parent, const u32 *intspec, u32 ointsize, imaplen /= sizeof(u32); /* Look for a mask */ - imask = get_property(ipar, "interrupt-map-mask", NULL); + imask = of_get_property(ipar, "interrupt-map-mask", NULL); /* If we were passed no "reg" property and we attempt to parse * an interrupt-map, then #address-cells must be 0. @@ -863,15 +864,13 @@ int of_irq_map_raw(struct device_node *parent, const u32 *intspec, u32 ointsize, /* Get #interrupt-cells and #address-cells of new * parent */ - tmp = get_property(newpar, "#interrupt-cells", - NULL); + tmp = of_get_property(newpar, "#interrupt-cells", NULL); if (tmp == NULL) { DBG(" -> parent lacks #interrupt-cells !\n"); goto fail; } newintsize = *tmp; - tmp = get_property(newpar, "#address-cells", - NULL); + tmp = of_get_property(newpar, "#address-cells", NULL); newaddrsize = (tmp == NULL) ? 0 : *tmp; DBG(" -> newintsize=%d, newaddrsize=%d\n", @@ -928,7 +927,7 @@ static int of_irq_map_oldworld(struct device_node *device, int index, * everything together on these) */ while (device) { - ints = get_property(device, "AAPL,interrupts", &intlen); + ints = of_get_property(device, "AAPL,interrupts", &intlen); if (ints != NULL) break; device = device->parent; @@ -970,13 +969,13 @@ int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq return of_irq_map_oldworld(device, index, out_irq); /* Get the interrupts property */ - intspec = get_property(device, "interrupts", &intlen); + intspec = of_get_property(device, "interrupts", &intlen); if (intspec == NULL) return -EINVAL; intlen /= sizeof(u32); /* Get the reg property (if any) */ - addr = get_property(device, "reg", NULL); + addr = of_get_property(device, "reg", NULL); /* Look for the interrupt parent. */ p = of_irq_find_parent(device); @@ -984,7 +983,7 @@ int of_irq_map_one(struct device_node *device, int index, struct of_irq *out_irq return -EINVAL; /* Get size of interrupt specifier */ - tmp = get_property(p, "#interrupt-cells", NULL); + tmp = of_get_property(p, "#interrupt-cells", NULL); if (tmp == NULL) { of_node_put(p); return -EINVAL; diff --git a/arch/powerpc/kernel/rtas-proc.c b/arch/powerpc/kernel/rtas-proc.c index 6cbf2ae5d7aa..190b7ed1dbfb 100644 --- a/arch/powerpc/kernel/rtas-proc.c +++ b/arch/powerpc/kernel/rtas-proc.c @@ -450,7 +450,7 @@ static int ppc_rtas_sensors_show(struct seq_file *m, void *v) int llen, offs; sprintf (rstr, SENSOR_PREFIX"%04d", p->token); - loc = get_property(rtas_node, rstr, &llen); + loc = of_get_property(rtas_node, rstr, &llen); /* A sensor may have multiple instances */ for (j = 0, offs = 0; j <= p->quant; j++) { @@ -477,7 +477,7 @@ static int ppc_rtas_find_all_sensors(void) const unsigned int *utmp; int len, i; - utmp = get_property(rtas_node, "rtas-sensors", &len); + utmp = of_get_property(rtas_node, "rtas-sensors", &len); if (utmp == NULL) { printk (KERN_ERR "error: could not get rtas-sensors\n"); return 1; diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index 9d0735a54564..214780798289 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -192,18 +192,19 @@ void rtas_progress(char *s, unsigned short hex) if (display_width == 0) { display_width = 0x10; - if ((root = find_path_device("/rtas"))) { - if ((p = get_property(root, + if ((root = of_find_node_by_path("/rtas"))) { + if ((p = of_get_property(root, "ibm,display-line-length", NULL))) display_width = *p; - if ((p = get_property(root, + if ((p = of_get_property(root, "ibm,form-feed", NULL))) form_feed = *p; - if ((p = get_property(root, + if ((p = of_get_property(root, "ibm,display-number-of-lines", NULL))) display_lines = *p; - row_width = get_property(root, + row_width = of_get_property(root, "ibm,display-truncation-length", NULL); + of_node_put(root); } display_character = rtas_token("display-character"); set_indicator = rtas_token("set-indicator"); @@ -298,7 +299,7 @@ int rtas_token(const char *service) const int *tokp; if (rtas.dev == NULL) return RTAS_UNKNOWN_SERVICE; - tokp = get_property(rtas.dev, service, NULL); + tokp = of_get_property(rtas.dev, service, NULL); return tokp ? *tokp : RTAS_UNKNOWN_SERVICE; } EXPORT_SYMBOL(rtas_token); @@ -832,12 +833,12 @@ void __init rtas_initialize(void) if (rtas.dev) { const u32 *basep, *entryp, *sizep; - basep = get_property(rtas.dev, "linux,rtas-base", NULL); - sizep = get_property(rtas.dev, "rtas-size", NULL); + basep = of_get_property(rtas.dev, "linux,rtas-base", NULL); + sizep = of_get_property(rtas.dev, "rtas-size", NULL); if (basep != NULL && sizep != NULL) { rtas.base = *basep; rtas.size = *sizep; - entryp = get_property(rtas.dev, + entryp = of_get_property(rtas.dev, "linux,rtas-entry", NULL); if (entryp == NULL) /* Ugh */ rtas.entry = rtas.base; diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c index ace9f4c86e67..f2286822be09 100644 --- a/arch/powerpc/kernel/rtas_pci.c +++ b/arch/powerpc/kernel/rtas_pci.c @@ -60,7 +60,7 @@ static int of_device_available(struct device_node * dn) { const char *status; - status = get_property(dn, "status", NULL); + status = of_get_property(dn, "status", NULL); if (!status) return 1; @@ -177,7 +177,7 @@ struct pci_ops rtas_pci_ops = { int is_python(struct device_node *dev) { - const char *model = get_property(dev, "model", NULL); + const char *model = of_get_property(dev, "model", NULL); if (model && strstr(model, "Python")) return 1; @@ -247,7 +247,7 @@ static int phb_set_bus_ranges(struct device_node *dev, const int *bus_range; unsigned int len; - bus_range = get_property(dev, "bus-range", &len); + bus_range = of_get_property(dev, "bus-range", &len); if (bus_range == NULL || len < 2 * sizeof(int)) { return 1; } @@ -274,7 +274,7 @@ int __devinit rtas_setup_phb(struct pci_controller *phb) return 0; } -unsigned long __init find_and_init_phbs(void) +void __init find_and_init_phbs(void) { struct device_node *node; struct pci_controller *phb; @@ -309,18 +309,16 @@ unsigned long __init find_and_init_phbs(void) if (of_chosen) { const int *prop; - prop = get_property(of_chosen, + prop = of_get_property(of_chosen, "linux,pci-probe-only", NULL); if (prop) pci_probe_only = *prop; - prop = get_property(of_chosen, + prop = of_get_property(of_chosen, "linux,pci-assign-all-buses", NULL); if (prop) pci_assign_all_buses = *prop; } - - return 0; } /* RPA-specific bits for removing PHBs */ diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index 89cfaf49d3de..370803722e47 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -21,7 +21,6 @@ #include <linux/delay.h> #include <linux/initrd.h> #include <linux/platform_device.h> -#include <linux/ide.h> #include <linux/seq_file.h> #include <linux/ioport.h> #include <linux/console.h> @@ -304,26 +303,8 @@ struct seq_operations cpuinfo_op = { void __init check_for_initrd(void) { #ifdef CONFIG_BLK_DEV_INITRD - const unsigned int *prop; - int len; - - DBG(" -> check_for_initrd()\n"); - - if (of_chosen) { - prop = get_property(of_chosen, "linux,initrd-start", &len); - if (prop != NULL) { - initrd_start = (unsigned long) - __va(of_read_ulong(prop, len / 4)); - prop = get_property(of_chosen, - "linux,initrd-end", &len); - if (prop != NULL) { - initrd_end = (unsigned long) - __va(of_read_ulong(prop, len / 4)); - initrd_below_start_ok = 1; - } else - initrd_start = 0; - } - } + DBG(" -> check_for_initrd() initrd_start=0x%lx initrd_end=0x%lx\n", + initrd_start, initrd_end); /* If we were passed an initrd, set the ROOT_DEV properly if the values * look sensible. If not, clear initrd reference. @@ -371,11 +352,12 @@ void __init smp_setup_cpu_maps(void) const int *intserv; int j, len = sizeof(u32), nthreads = 1; - intserv = get_property(dn, "ibm,ppc-interrupt-server#s", &len); + intserv = of_get_property(dn, "ibm,ppc-interrupt-server#s", + &len); if (intserv) nthreads = len / sizeof(int); else { - intserv = get_property(dn, "reg", NULL); + intserv = of_get_property(dn, "reg", NULL); if (!intserv) intserv = &cpu; /* assume logical == phys */ } @@ -398,10 +380,10 @@ void __init smp_setup_cpu_maps(void) int num_addr_cell, num_size_cell, maxcpus; const unsigned int *ireg; - num_addr_cell = prom_n_addr_cells(dn); - num_size_cell = prom_n_size_cells(dn); + num_addr_cell = of_n_addr_cells(dn); + num_size_cell = of_n_size_cells(dn); - ireg = get_property(dn, "ibm,lrdr-capacity", NULL); + ireg = of_get_property(dn, "ibm,lrdr-capacity", NULL); if (!ireg) goto out; @@ -496,11 +478,39 @@ void probe_machine(void) printk(KERN_INFO "Using %s machine description\n", ppc_md.name); } +/* Match a class of boards, not a specific device configuration. */ int check_legacy_ioport(unsigned long base_port) { - if (ppc_md.check_legacy_ioport == NULL) - return 0; - return ppc_md.check_legacy_ioport(base_port); + struct device_node *parent, *np = NULL; + int ret = -ENODEV; + + switch(base_port) { + case I8042_DATA_REG: + np = of_find_node_by_type(NULL, "8042"); + break; + case FDC_BASE: /* FDC1 */ + np = of_find_node_by_type(NULL, "fdc"); + break; +#ifdef CONFIG_PPC_PREP + case _PIDXR: + case _PNPWRP: + case PNPBIOS_BASE: + /* implement me */ +#endif + default: + /* ipmi is supposed to fail here */ + break; + } + if (!np) + return ret; + parent = of_get_parent(np); + if (parent) { + if (strcmp(parent->type, "isa") == 0) + ret = 0; + of_node_put(parent); + } + of_node_put(np); + return ret; } EXPORT_SYMBOL(check_legacy_ioport); diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 44a6a3c47feb..35f8f443c14f 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -92,7 +92,8 @@ unsigned long __init early_init(unsigned long dt_ptr) /* First zero the BSS -- use memset_io, some platforms don't have * caches on yet */ - memset_io((void __iomem *)PTRRELOC(&__bss_start), 0, _end - __bss_start); + memset_io((void __iomem *)PTRRELOC(&__bss_start), 0, + __bss_stop - __bss_start); /* * Identify the CPU type and fix up code sections @@ -195,18 +196,22 @@ EXPORT_SYMBOL(nvram_sync); #endif /* CONFIG_NVRAM */ -static struct cpu cpu_devices[NR_CPUS]; +static DEFINE_PER_CPU(struct cpu, cpu_devices); int __init ppc_init(void) { - int i; + int cpu; /* clear the progress line */ - if ( ppc_md.progress ) ppc_md.progress(" ", 0xffff); + if (ppc_md.progress) + ppc_md.progress(" ", 0xffff); /* register CPU devices */ - for_each_possible_cpu(i) - register_cpu(&cpu_devices[i], i); + for_each_possible_cpu(cpu) { + struct cpu *c = &per_cpu(cpu_devices, cpu); + c->hotpluggable = 1; + register_cpu(c, cpu); + } /* call platform init */ if (ppc_md.init != NULL) { diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 3733de30e84d..22083ce3cc30 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -20,7 +20,6 @@ #include <linux/reboot.h> #include <linux/delay.h> #include <linux/initrd.h> -#include <linux/ide.h> #include <linux/seq_file.h> #include <linux/ioport.h> #include <linux/console.h> @@ -110,7 +109,7 @@ static void check_smt_enabled(void) dn = of_find_node_by_path("/options"); if (dn) { - smt_option = get_property(dn, "ibm,smt-enabled", NULL); + smt_option = of_get_property(dn, "ibm,smt-enabled", NULL); if (smt_option) { if (!strcmp(smt_option, "on")) @@ -305,10 +304,10 @@ static void __init initialize_cache_info(void) size = 0; lsize = cur_cpu_spec->dcache_bsize; - sizep = get_property(np, "d-cache-size", NULL); + sizep = of_get_property(np, "d-cache-size", NULL); if (sizep != NULL) size = *sizep; - lsizep = get_property(np, dc, NULL); + lsizep = of_get_property(np, dc, NULL); if (lsizep != NULL) lsize = *lsizep; if (sizep == 0 || lsizep == 0) @@ -322,10 +321,10 @@ static void __init initialize_cache_info(void) size = 0; lsize = cur_cpu_spec->icache_bsize; - sizep = get_property(np, "i-cache-size", NULL); + sizep = of_get_property(np, "i-cache-size", NULL); if (sizep != NULL) size = *sizep; - lsizep = get_property(np, ic, NULL); + lsizep = of_get_property(np, ic, NULL); if (lsizep != NULL) lsize = *lsizep; if (sizep == 0 || lsizep == 0) diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 924d692bc8f9..d8e503b2e1af 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -428,10 +428,6 @@ void generic_mach_cpu_die(void) smp_wmb(); while (__get_cpu_var(cpu_state) != CPU_UP_PREPARE) cpu_relax(); - -#ifdef CONFIG_PPC64 - flush_tlb_pending(); -#endif cpu_set(cpu, cpu_online_map); local_irq_enable(); } diff --git a/arch/powerpc/kernel/sys_ppc32.c b/arch/powerpc/kernel/sys_ppc32.c index 673e8d9df7f5..047246ad4f65 100644 --- a/arch/powerpc/kernel/sys_ppc32.c +++ b/arch/powerpc/kernel/sys_ppc32.c @@ -53,10 +53,6 @@ #include <asm/ppc-pci.h> #include <asm/syscalls.h> -/* readdir & getdents */ -#define NAME_OFFSET(de) ((int) ((de)->d_name - (char __user *) (de))) -#define ROUND_UP(x) (((x)+sizeof(u32)-1) & ~(sizeof(u32)-1)) - struct old_linux_dirent32 { u32 d_ino; u32 d_offset; diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c index d57818aea081..933e214c33e8 100644 --- a/arch/powerpc/kernel/sysfs.c +++ b/arch/powerpc/kernel/sysfs.c @@ -66,16 +66,17 @@ static int __init smt_setup(void) if (!cpu_has_feature(CPU_FTR_SMT)) return -ENODEV; - options = find_path_device("/options"); + options = of_find_node_by_path("/options"); if (!options) return -ENODEV; - val = get_property(options, "ibm,smt-snooze-delay", NULL); + val = of_get_property(options, "ibm,smt-snooze-delay", NULL); if (!smt_snooze_cmdline && val) { for_each_possible_cpu(cpu) per_cpu(smt_snooze_delay, cpu) = *val; } + of_node_put(options); return 0; } __initcall(smt_setup); @@ -189,12 +190,12 @@ SYSFS_PMCSETUP(purr, SPRN_PURR); SYSFS_PMCSETUP(spurr, SPRN_SPURR); SYSFS_PMCSETUP(dscr, SPRN_DSCR); -SYSFS_PMCSETUP(pa6t_pmc0, PA6T_SPRN_PMC0); -SYSFS_PMCSETUP(pa6t_pmc1, PA6T_SPRN_PMC1); -SYSFS_PMCSETUP(pa6t_pmc2, PA6T_SPRN_PMC2); -SYSFS_PMCSETUP(pa6t_pmc3, PA6T_SPRN_PMC3); -SYSFS_PMCSETUP(pa6t_pmc4, PA6T_SPRN_PMC4); -SYSFS_PMCSETUP(pa6t_pmc5, PA6T_SPRN_PMC5); +SYSFS_PMCSETUP(pa6t_pmc0, SPRN_PA6T_PMC0); +SYSFS_PMCSETUP(pa6t_pmc1, SPRN_PA6T_PMC1); +SYSFS_PMCSETUP(pa6t_pmc2, SPRN_PA6T_PMC2); +SYSFS_PMCSETUP(pa6t_pmc3, SPRN_PA6T_PMC3); +SYSFS_PMCSETUP(pa6t_pmc4, SPRN_PA6T_PMC4); +SYSFS_PMCSETUP(pa6t_pmc5, SPRN_PA6T_PMC5); static SYSDEV_ATTR(mmcra, 0600, show_mmcra, store_mmcra); diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index f6f0c6b07c4c..7cedef8f5f70 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -834,7 +834,7 @@ static int __init get_freq(char *name, int cells, unsigned long *val) cpu = of_find_node_by_type(NULL, "cpu"); if (cpu) { - fp = get_property(cpu, name, NULL); + fp = of_get_property(cpu, name, NULL); if (fp) { found = 1; *val = of_read_ulong(fp, cells); diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index 17724fb2067f..f7862224fe85 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -90,21 +90,11 @@ EXPORT_SYMBOL(unregister_die_notifier); * Trap & Exception support */ -static DEFINE_SPINLOCK(die_lock); - -int die(const char *str, struct pt_regs *regs, long err) -{ - static int die_counter; - - if (debugger(regs)) - return 1; - - console_verbose(); - spin_lock_irq(&die_lock); - bust_spinlocks(1); #ifdef CONFIG_PMAC_BACKLIGHT +static void pmac_backlight_unblank(void) +{ mutex_lock(&pmac_backlight_mutex); - if (machine_is(powermac) && pmac_backlight) { + if (pmac_backlight) { struct backlight_properties *props; props = &pmac_backlight->props; @@ -113,26 +103,67 @@ int die(const char *str, struct pt_regs *regs, long err) backlight_update_status(pmac_backlight); } mutex_unlock(&pmac_backlight_mutex); +} +#else +static inline void pmac_backlight_unblank(void) { } #endif - printk("Oops: %s, sig: %ld [#%d]\n", str, err, ++die_counter); + +int die(const char *str, struct pt_regs *regs, long err) +{ + static struct { + spinlock_t lock; + u32 lock_owner; + int lock_owner_depth; + } die = { + .lock = __SPIN_LOCK_UNLOCKED(die.lock), + .lock_owner = -1, + .lock_owner_depth = 0 + }; + static int die_counter; + unsigned long flags; + + if (debugger(regs)) + return 1; + + oops_enter(); + + if (die.lock_owner != raw_smp_processor_id()) { + console_verbose(); + spin_lock_irqsave(&die.lock, flags); + die.lock_owner = smp_processor_id(); + die.lock_owner_depth = 0; + bust_spinlocks(1); + if (machine_is(powermac)) + pmac_backlight_unblank(); + } else { + local_save_flags(flags); + } + + if (++die.lock_owner_depth < 3) { + printk("Oops: %s, sig: %ld [#%d]\n", str, err, ++die_counter); #ifdef CONFIG_PREEMPT - printk("PREEMPT "); + printk("PREEMPT "); #endif #ifdef CONFIG_SMP - printk("SMP NR_CPUS=%d ", NR_CPUS); + printk("SMP NR_CPUS=%d ", NR_CPUS); #endif #ifdef CONFIG_DEBUG_PAGEALLOC - printk("DEBUG_PAGEALLOC "); + printk("DEBUG_PAGEALLOC "); #endif #ifdef CONFIG_NUMA - printk("NUMA "); + printk("NUMA "); #endif - printk("%s\n", ppc_md.name ? "" : ppc_md.name); + printk("%s\n", ppc_md.name ? ppc_md.name : ""); + + print_modules(); + show_regs(regs); + } else { + printk("Recursive die() failure, output suppressed\n"); + } - print_modules(); - show_regs(regs); bust_spinlocks(0); - spin_unlock_irq(&die_lock); + die.lock_owner = -1; + spin_unlock_irqrestore(&die.lock, flags); if (kexec_should_crash(current) || kexec_sr_activated(smp_processor_id())) @@ -145,6 +176,7 @@ int die(const char *str, struct pt_regs *regs, long err) if (panic_on_oops) panic("Fatal exception"); + oops_exit(); do_exit(err); return 0; diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c index 2968ffeafdb6..9eaefac5053f 100644 --- a/arch/powerpc/kernel/vio.c +++ b/arch/powerpc/kernel/vio.c @@ -81,7 +81,7 @@ static struct iommu_table *vio_build_iommu_table(struct vio_dev *dev) struct iommu_table *tbl; unsigned long offset, size; - dma_window = get_property(dev->dev.archdata.of_node, + dma_window = of_get_property(dev->dev.archdata.of_node, "ibm,my-dma-window", NULL); if (!dma_window) return NULL; @@ -226,7 +226,7 @@ struct vio_dev * __devinit vio_register_device_node(struct device_node *of_node) return NULL; } - unit_address = get_property(of_node, "reg", NULL); + unit_address = of_get_property(of_node, "reg", NULL); if (unit_address == NULL) { printk(KERN_WARNING "%s: node %s missing 'reg'\n", __FUNCTION__, @@ -246,7 +246,7 @@ struct vio_dev * __devinit vio_register_device_node(struct device_node *of_node) viodev->type = of_node->type; viodev->unit_address = *unit_address; if (firmware_has_feature(FW_FEATURE_ISERIES)) { - unit_address = get_property(of_node, + unit_address = of_get_property(of_node, "linux,unit_address", NULL); if (unit_address != NULL) viodev->unit_address = *unit_address; @@ -308,7 +308,7 @@ static int __init vio_bus_init(void) return err; } - node_vroot = find_devices("vdevice"); + node_vroot = of_find_node_by_name(NULL, "vdevice"); if (node_vroot) { struct device_node *of_node; @@ -322,6 +322,7 @@ static int __init vio_bus_init(void) __FUNCTION__, of_node); vio_register_device_node(of_node); } + of_node_put(node_vroot); } return 0; @@ -377,7 +378,7 @@ static int vio_hotplug(struct device *dev, char **envp, int num_envp, dn = dev->archdata.of_node; if (!dn) return -ENODEV; - cp = get_property(dn, "compatible", &length); + cp = of_get_property(dn, "compatible", &length); if (!cp) return -ENODEV; @@ -406,12 +407,12 @@ struct bus_type vio_bus_type = { * @which: The property/attribute to be extracted. * @length: Pointer to length of returned data size (unused if NULL). * - * Calls prom.c's get_property() to return the value of the + * Calls prom.c's of_get_property() to return the value of the * attribute specified by @which */ const void *vio_get_attribute(struct vio_dev *vdev, char *which, int *length) { - return get_property(vdev->dev.archdata.of_node, which, length); + return of_get_property(vdev->dev.archdata.of_node, which, length); } EXPORT_SYMBOL(vio_get_attribute); @@ -443,7 +444,7 @@ struct vio_dev *vio_find_node(struct device_node *vnode) char kobj_name[BUS_ID_SIZE]; /* construct the kobject name from the device node */ - unit_address = get_property(vnode, "reg", NULL); + unit_address = of_get_property(vnode, "reg", NULL); if (!unit_address) return NULL; snprintf(kobj_name, BUS_ID_SIZE, "%x", *unit_address); diff --git a/arch/powerpc/lib/copyuser_64.S b/arch/powerpc/lib/copyuser_64.S index a6b54cb97c49..25ec5378afa4 100644 --- a/arch/powerpc/lib/copyuser_64.S +++ b/arch/powerpc/lib/copyuser_64.S @@ -24,7 +24,7 @@ _GLOBAL(__copy_tofrom_user) dcbt 0,r4 beq .Lcopy_page_4K andi. r6,r6,7 - mtcrf 0x01,r5 + PPC_MTOCRF 0x01,r5 blt cr1,.Lshort_copy bne .Ldst_unaligned .Ldst_aligned: @@ -135,7 +135,7 @@ _GLOBAL(__copy_tofrom_user) b .Ldo_tail .Ldst_unaligned: - mtcrf 0x01,r6 /* put #bytes to 8B bdry into cr7 */ + PPC_MTOCRF 0x01,r6 /* put #bytes to 8B bdry into cr7 */ subf r5,r6,r5 li r7,0 cmpldi r1,r5,16 @@ -150,7 +150,7 @@ _GLOBAL(__copy_tofrom_user) 2: bf cr7*4+1,3f 37: lwzx r0,r7,r4 83: stwx r0,r7,r3 -3: mtcrf 0x01,r5 +3: PPC_MTOCRF 0x01,r5 add r4,r6,r4 add r3,r6,r3 b .Ldst_aligned diff --git a/arch/powerpc/lib/locks.c b/arch/powerpc/lib/locks.c index 80b482ca30df..79d0fa3a470d 100644 --- a/arch/powerpc/lib/locks.c +++ b/arch/powerpc/lib/locks.c @@ -43,9 +43,11 @@ void __spin_yield(raw_spinlock_t *lock) if (firmware_has_feature(FW_FEATURE_ISERIES)) HvCall2(HvCallBaseYieldProcessor, HvCall_YieldToProc, ((u64)holder_cpu << 32) | yield_count); +#ifdef CONFIG_PPC_SPLPAR else plpar_hcall_norets(H_CONFER, get_hard_smp_processor_id(holder_cpu), yield_count); +#endif } /* @@ -72,9 +74,11 @@ void __rw_yield(raw_rwlock_t *rw) if (firmware_has_feature(FW_FEATURE_ISERIES)) HvCall2(HvCallBaseYieldProcessor, HvCall_YieldToProc, ((u64)holder_cpu << 32) | yield_count); +#ifdef CONFIG_PPC_SPLPAR else plpar_hcall_norets(H_CONFER, get_hard_smp_processor_id(holder_cpu), yield_count); +#endif } #endif diff --git a/arch/powerpc/lib/mem_64.S b/arch/powerpc/lib/mem_64.S index 68df20283ff5..11ce045e21fd 100644 --- a/arch/powerpc/lib/mem_64.S +++ b/arch/powerpc/lib/mem_64.S @@ -19,7 +19,7 @@ _GLOBAL(memset) rlwimi r4,r4,16,0,15 cmplw cr1,r5,r0 /* do we get that far? */ rldimi r4,r4,32,0 - mtcrf 1,r0 + PPC_MTOCRF 1,r0 mr r6,r3 blt cr1,8f beq+ 3f /* if already 8-byte aligned */ @@ -49,7 +49,7 @@ _GLOBAL(memset) bdnz 4b 5: srwi. r0,r5,3 clrlwi r5,r5,29 - mtcrf 1,r0 + PPC_MTOCRF 1,r0 beq 8f bf 29,6f std r4,0(r6) @@ -65,7 +65,7 @@ _GLOBAL(memset) std r4,0(r6) addi r6,r6,8 8: cmpwi r5,0 - mtcrf 1,r5 + PPC_MTOCRF 1,r5 beqlr+ bf 29,9f stw r4,0(r6) diff --git a/arch/powerpc/lib/memcpy_64.S b/arch/powerpc/lib/memcpy_64.S index 7173ba98f427..3f131129d1c1 100644 --- a/arch/powerpc/lib/memcpy_64.S +++ b/arch/powerpc/lib/memcpy_64.S @@ -12,7 +12,7 @@ .align 7 _GLOBAL(memcpy) std r3,48(r1) /* save destination pointer for return value */ - mtcrf 0x01,r5 + PPC_MTOCRF 0x01,r5 cmpldi cr1,r5,16 neg r6,r3 # LS 3 bits = # bytes to 8-byte dest bdry andi. r6,r6,7 @@ -128,7 +128,7 @@ _GLOBAL(memcpy) b .Ldo_tail .Ldst_unaligned: - mtcrf 0x01,r6 # put #bytes to 8B bdry into cr7 + PPC_MTOCRF 0x01,r6 # put #bytes to 8B bdry into cr7 subf r5,r6,r5 li r7,0 cmpldi r1,r5,16 @@ -143,7 +143,7 @@ _GLOBAL(memcpy) 2: bf cr7*4+1,3f lwzx r0,r7,r4 stwx r0,r7,r3 -3: mtcrf 0x01,r5 +3: PPC_MTOCRF 0x01,r5 add r4,r6,r4 add r3,r6,r3 b .Ldst_aligned diff --git a/arch/powerpc/lib/sstep.c b/arch/powerpc/lib/sstep.c index 7e8ded051b5b..4aae0c387645 100644 --- a/arch/powerpc/lib/sstep.c +++ b/arch/powerpc/lib/sstep.c @@ -54,7 +54,7 @@ static int __kprobes branch_taken(unsigned int instr, struct pt_regs *regs) */ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr) { - unsigned int opcode, rd; + unsigned int opcode, rs, rb, rd, spr; unsigned long int imm; opcode = instr >> 26; @@ -152,6 +152,49 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr) regs->nip &= 0xffffffffUL; return 1; #endif + case 0x26: /* mfcr */ + regs->gpr[rd] = regs->ccr; + regs->gpr[rd] &= 0xffffffffUL; + goto mtspr_out; + case 0x2a6: /* mfspr */ + spr = (instr >> 11) & 0x3ff; + switch (spr) { + case 0x20: /* mfxer */ + regs->gpr[rd] = regs->xer; + regs->gpr[rd] &= 0xffffffffUL; + goto mtspr_out; + case 0x100: /* mflr */ + regs->gpr[rd] = regs->link; + goto mtspr_out; + case 0x120: /* mfctr */ + regs->gpr[rd] = regs->ctr; + goto mtspr_out; + } + break; + case 0x378: /* orx */ + rs = (instr >> 21) & 0x1f; + rb = (instr >> 11) & 0x1f; + if (rs == rb) { /* mr */ + rd = (instr >> 16) & 0x1f; + regs->gpr[rd] = regs->gpr[rs]; + goto mtspr_out; + } + break; + case 0x3a6: /* mtspr */ + spr = (instr >> 11) & 0x3ff; + switch (spr) { + case 0x20: /* mtxer */ + regs->xer = (regs->gpr[rd] & 0xffffffffUL); + goto mtspr_out; + case 0x100: /* mtlr */ + regs->link = regs->gpr[rd]; + goto mtspr_out; + case 0x120: /* mtctr */ + regs->ctr = regs->gpr[rd]; +mtspr_out: + regs->nip += 4; + return 1; + } } } return 0; diff --git a/arch/powerpc/mm/hash_low_32.S b/arch/powerpc/mm/hash_low_32.S index bd68df5fa78a..ddceefc06ecc 100644 --- a/arch/powerpc/mm/hash_low_32.S +++ b/arch/powerpc/mm/hash_low_32.S @@ -283,6 +283,7 @@ Hash_msk = (((1 << Hash_bits) - 1) * 64) #define PTEG_SIZE 64 #define LG_PTEG_SIZE 6 #define LDPTEu lwzu +#define LDPTE lwz #define STPTE stw #define CMPPTE cmpw #define PTE_H 0x40 @@ -389,13 +390,30 @@ _GLOBAL(hash_page_patch_C) * and we know there is a definite (although small) speed * advantage to putting the PTE in the primary PTEG, we always * put the PTE in the primary PTEG. + * + * In addition, we skip any slot that is mapping kernel text in + * order to avoid a deadlock when not using BAT mappings if + * trying to hash in the kernel hash code itself after it has + * already taken the hash table lock. This works in conjunction + * with pre-faulting of the kernel text. + * + * If the hash table bucket is full of kernel text entries, we'll + * lockup here but that shouldn't happen */ - addis r4,r7,next_slot@ha + +1: addis r4,r7,next_slot@ha /* get next evict slot */ lwz r6,next_slot@l(r4) - addi r6,r6,PTE_SIZE + addi r6,r6,PTE_SIZE /* search for candidate */ andi. r6,r6,7*PTE_SIZE stw r6,next_slot@l(r4) add r4,r3,r6 + LDPTE r0,PTE_SIZE/2(r4) /* get PTE second word */ + clrrwi r0,r0,12 + lis r6,etext@h + ori r6,r6,etext@l /* get etext */ + tophys(r6,r6) + cmpl cr0,r0,r6 /* compare and try again */ + blt 1b #ifndef CONFIG_SMP /* Store PTE in PTEG */ diff --git a/arch/powerpc/mm/hash_low_64.S b/arch/powerpc/mm/hash_low_64.S index 9bc0a9c2b9bc..e64ce3eec36e 100644 --- a/arch/powerpc/mm/hash_low_64.S +++ b/arch/powerpc/mm/hash_low_64.S @@ -445,9 +445,12 @@ END_FTR_SECTION(CPU_FTR_NOEXECUTE|CPU_FTR_COHERENT_ICACHE, CPU_FTR_NOEXECUTE) htab_insert_pte: /* real page number in r5, PTE RPN value + index */ - rldicl r5,r31,64-PTE_RPN_SHIFT,PTE_RPN_SHIFT + andis. r0,r31,_PAGE_4K_PFN@h + srdi r5,r31,PTE_RPN_SHIFT + bne- htab_special_pfn sldi r5,r5,PAGE_SHIFT-HW_PAGE_SHIFT add r5,r5,r25 +htab_special_pfn: sldi r5,r5,HW_PAGE_SHIFT /* Calculate primary group hash */ diff --git a/arch/powerpc/mm/hash_native_64.c b/arch/powerpc/mm/hash_native_64.c index 6f1016acdbf6..79aedaf36f2b 100644 --- a/arch/powerpc/mm/hash_native_64.c +++ b/arch/powerpc/mm/hash_native_64.c @@ -505,7 +505,7 @@ static inline int tlb_batching_enabled(void) int enabled = 1; if (root) { - const char *model = get_property(root, "model", NULL); + const char *model = of_get_property(root, "model", NULL); if (model && !strcmp(model, "IBM,9076-N81")) enabled = 0; of_node_put(root); diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index 3c7fe2c65b5a..49618461defb 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -100,6 +100,11 @@ unsigned int HPAGE_SHIFT; #ifdef CONFIG_PPC_64K_PAGES int mmu_ci_restrictions; #endif +#ifdef CONFIG_DEBUG_PAGEALLOC +static u8 *linear_map_hash_slots; +static unsigned long linear_map_hash_count; +static spinlock_t linear_map_hash_lock; +#endif /* CONFIG_DEBUG_PAGEALLOC */ /* There are definitions of page sizes arrays to be used when none * is provided by the firmware. @@ -152,11 +157,10 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend, for (vaddr = vstart, paddr = pstart; vaddr < vend; vaddr += step, paddr += step) { - unsigned long vpn, hash, hpteg; + unsigned long hash, hpteg; unsigned long vsid = get_kernel_vsid(vaddr); unsigned long va = (vsid << 28) | (vaddr & 0x0fffffff); - vpn = va >> shift; tmp_mode = mode; /* Make non-kernel text non-executable */ @@ -174,6 +178,10 @@ int htab_bolt_mapping(unsigned long vstart, unsigned long vend, if (ret < 0) break; +#ifdef CONFIG_DEBUG_PAGEALLOC + if ((paddr >> PAGE_SHIFT) < linear_map_hash_count) + linear_map_hash_slots[paddr >> PAGE_SHIFT] = ret | 0x80; +#endif /* CONFIG_DEBUG_PAGEALLOC */ } return ret < 0 ? ret : 0; } @@ -281,6 +289,7 @@ static void __init htab_init_page_sizes(void) memcpy(mmu_psize_defs, mmu_psize_defaults_gp, sizeof(mmu_psize_defaults_gp)); found: +#ifndef CONFIG_DEBUG_PAGEALLOC /* * Pick a size for the linear mapping. Currently, we only support * 16M, 1M and 4K which is the default @@ -289,6 +298,7 @@ static void __init htab_init_page_sizes(void) mmu_linear_psize = MMU_PAGE_16M; else if (mmu_psize_defs[MMU_PAGE_1M].shift) mmu_linear_psize = MMU_PAGE_1M; +#endif /* CONFIG_DEBUG_PAGEALLOC */ #ifdef CONFIG_PPC_64K_PAGES /* @@ -303,12 +313,14 @@ static void __init htab_init_page_sizes(void) if (mmu_psize_defs[MMU_PAGE_64K].shift) { mmu_virtual_psize = MMU_PAGE_64K; mmu_vmalloc_psize = MMU_PAGE_64K; + if (mmu_linear_psize == MMU_PAGE_4K) + mmu_linear_psize = MMU_PAGE_64K; if (cpu_has_feature(CPU_FTR_CI_LARGE_PAGE)) mmu_io_psize = MMU_PAGE_64K; else mmu_ci_restrictions = 1; } -#endif +#endif /* CONFIG_PPC_64K_PAGES */ printk(KERN_DEBUG "Page orders: linear mapping = %d, " "virtual = %d, io = %d\n", @@ -476,6 +488,13 @@ void __init htab_initialize(void) mode_rw = _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX; +#ifdef CONFIG_DEBUG_PAGEALLOC + linear_map_hash_count = lmb_end_of_DRAM() >> PAGE_SHIFT; + linear_map_hash_slots = __va(lmb_alloc_base(linear_map_hash_count, + 1, lmb.rmo_size)); + memset(linear_map_hash_slots, 0, linear_map_hash_count); +#endif /* CONFIG_DEBUG_PAGEALLOC */ + /* On U3 based machines, we need to reserve the DART area and * _NOT_ map it to avoid cache paradoxes as it's remapped non * cacheable later on @@ -573,6 +592,27 @@ unsigned int hash_page_do_lazy_icache(unsigned int pp, pte_t pte, int trap) return pp; } +/* + * Demote a segment to using 4k pages. + * For now this makes the whole process use 4k pages. + */ +void demote_segment_4k(struct mm_struct *mm, unsigned long addr) +{ +#ifdef CONFIG_PPC_64K_PAGES + if (mm->context.user_psize == MMU_PAGE_4K) + return; + mm->context.user_psize = MMU_PAGE_4K; + mm->context.sllp = SLB_VSID_USER | mmu_psize_defs[MMU_PAGE_4K].sllp; + get_paca()->context = mm->context; + slb_flush_and_rebolt(); +#ifdef CONFIG_SPE_BASE + spu_flush_all_slbs(mm); +#endif +#endif +} + +EXPORT_SYMBOL_GPL(demote_segment_4k); + /* Result code is: * 0 - handled * 1 - normal page fault @@ -665,15 +705,19 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap) #ifndef CONFIG_PPC_64K_PAGES rc = __hash_page_4K(ea, access, vsid, ptep, trap, local); #else + /* If _PAGE_4K_PFN is set, make sure this is a 4k segment */ + if (pte_val(*ptep) & _PAGE_4K_PFN) { + demote_segment_4k(mm, ea); + psize = MMU_PAGE_4K; + } + if (mmu_ci_restrictions) { /* If this PTE is non-cacheable, switch to 4k */ if (psize == MMU_PAGE_64K && (pte_val(*ptep) & _PAGE_NO_CACHE)) { if (user_region) { + demote_segment_4k(mm, ea); psize = MMU_PAGE_4K; - mm->context.user_psize = MMU_PAGE_4K; - mm->context.sllp = SLB_VSID_USER | - mmu_psize_defs[MMU_PAGE_4K].sllp; } else if (ea < VMALLOC_END) { /* * some driver did a non-cacheable mapping @@ -756,16 +800,8 @@ void hash_preload(struct mm_struct *mm, unsigned long ea, if (mmu_ci_restrictions) { /* If this PTE is non-cacheable, switch to 4k */ if (mm->context.user_psize == MMU_PAGE_64K && - (pte_val(*ptep) & _PAGE_NO_CACHE)) { - mm->context.user_psize = MMU_PAGE_4K; - mm->context.sllp = SLB_VSID_USER | - mmu_psize_defs[MMU_PAGE_4K].sllp; - get_paca()->context = mm->context; - slb_flush_and_rebolt(); -#ifdef CONFIG_SPE_BASE - spu_flush_all_slbs(mm); -#endif - } + (pte_val(*ptep) & _PAGE_NO_CACHE)) + demote_segment_4k(mm, ea); } if (mm->context.user_psize == MMU_PAGE_64K) __hash_page_64K(ea, access, vsid, ptep, trap, local); @@ -825,3 +861,62 @@ void low_hash_fault(struct pt_regs *regs, unsigned long address) } bad_page_fault(regs, address, SIGBUS); } + +#ifdef CONFIG_DEBUG_PAGEALLOC +static void kernel_map_linear_page(unsigned long vaddr, unsigned long lmi) +{ + unsigned long hash, hpteg, vsid = get_kernel_vsid(vaddr); + unsigned long va = (vsid << 28) | (vaddr & 0x0fffffff); + unsigned long mode = _PAGE_ACCESSED | _PAGE_DIRTY | + _PAGE_COHERENT | PP_RWXX | HPTE_R_N; + int ret; + + hash = hpt_hash(va, PAGE_SHIFT); + hpteg = ((hash & htab_hash_mask) * HPTES_PER_GROUP); + + ret = ppc_md.hpte_insert(hpteg, va, __pa(vaddr), + mode, HPTE_V_BOLTED, mmu_linear_psize); + BUG_ON (ret < 0); + spin_lock(&linear_map_hash_lock); + BUG_ON(linear_map_hash_slots[lmi] & 0x80); + linear_map_hash_slots[lmi] = ret | 0x80; + spin_unlock(&linear_map_hash_lock); +} + +static void kernel_unmap_linear_page(unsigned long vaddr, unsigned long lmi) +{ + unsigned long hash, hidx, slot, vsid = get_kernel_vsid(vaddr); + unsigned long va = (vsid << 28) | (vaddr & 0x0fffffff); + + hash = hpt_hash(va, PAGE_SHIFT); + spin_lock(&linear_map_hash_lock); + BUG_ON(!(linear_map_hash_slots[lmi] & 0x80)); + hidx = linear_map_hash_slots[lmi] & 0x7f; + linear_map_hash_slots[lmi] = 0; + spin_unlock(&linear_map_hash_lock); + if (hidx & _PTEIDX_SECONDARY) + hash = ~hash; + slot = (hash & htab_hash_mask) * HPTES_PER_GROUP; + slot += hidx & _PTEIDX_GROUP_IX; + ppc_md.hpte_invalidate(slot, va, mmu_linear_psize, 0); +} + +void kernel_map_pages(struct page *page, int numpages, int enable) +{ + unsigned long flags, vaddr, lmi; + int i; + + local_irq_save(flags); + for (i = 0; i < numpages; i++, page++) { + vaddr = (unsigned long)page_address(page); + lmi = __pa(vaddr) >> PAGE_SHIFT; + if (lmi >= linear_map_hash_count) + continue; + if (enable) + kernel_map_linear_page(vaddr, lmi); + else + kernel_unmap_linear_page(vaddr, lmi); + } + local_irq_restore(flags); +} +#endif /* CONFIG_DEBUG_PAGEALLOC */ diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index f6ffaaa7a5bf..8508f973d9cc 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -316,12 +316,11 @@ void set_huge_pte_at(struct mm_struct *mm, unsigned long addr, { if (pte_present(*ptep)) { /* We open-code pte_clear because we need to pass the right - * argument to hpte_update (huge / !huge) + * argument to hpte_need_flush (huge / !huge). Might not be + * necessary anymore if we make hpte_need_flush() get the + * page size from the slices */ - unsigned long old = pte_update(ptep, ~0UL); - if (old & _PAGE_HASHPTE) - hpte_update(mm, addr & HPAGE_MASK, ptep, old, 1); - flush_tlb_pending(); + pte_update(mm, addr & HPAGE_MASK, ptep, ~0UL, 1); } *ptep = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS); } @@ -329,12 +328,7 @@ void set_huge_pte_at(struct mm_struct *mm, unsigned long addr, pte_t huge_ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) { - unsigned long old = pte_update(ptep, ~0UL); - - if (old & _PAGE_HASHPTE) - hpte_update(mm, addr & HPAGE_MASK, ptep, old, 1); - *ptep = __pte(0); - + unsigned long old = pte_update(mm, addr, ptep, ~0UL, 1); return __pte(old); } diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c index 0e53ca8f02fb..5fce6ccecb8d 100644 --- a/arch/powerpc/mm/init_32.c +++ b/arch/powerpc/mm/init_32.c @@ -115,6 +115,10 @@ void MMU_setup(void) if (strstr(cmd_line, "noltlbs")) { __map_without_ltlbs = 1; } +#ifdef CONFIG_DEBUG_PAGEALLOC + __map_without_bats = 1; + __map_without_ltlbs = 1; +#endif } /* diff --git a/arch/powerpc/mm/lmb.c b/arch/powerpc/mm/lmb.c index 716a2906a24d..e3a1e8dc536a 100644 --- a/arch/powerpc/mm/lmb.c +++ b/arch/powerpc/mm/lmb.c @@ -146,6 +146,10 @@ static long __init lmb_add_region(struct lmb_region *rgn, unsigned long base, unsigned long rgnbase = rgn->region[i].base; unsigned long rgnsize = rgn->region[i].size; + if ((rgnbase == base) && (rgnsize == size)) + /* Already have this region, so we're done */ + return 0; + adjacent = lmb_addrs_adjacent(base,size,rgnbase,rgnsize); if ( adjacent > 0 ) { rgn->region[i].base -= size; diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 52f397c108a7..c4bcd7546424 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -58,9 +58,6 @@ int init_bootmem_done; int mem_init_done; unsigned long memory_limit; -extern void hash_preload(struct mm_struct *mm, unsigned long ea, - unsigned long access, unsigned long trap); - int page_is_ram(unsigned long pfn) { unsigned long paddr = (pfn << PAGE_SHIFT); diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h index bea2d21ac6f7..9c4538bb04b0 100644 --- a/arch/powerpc/mm/mmu_decl.h +++ b/arch/powerpc/mm/mmu_decl.h @@ -19,9 +19,14 @@ * 2 of the License, or (at your option) any later version. * */ +#include <linux/mm.h> #include <asm/tlbflush.h> #include <asm/mmu.h> +extern void hash_preload(struct mm_struct *mm, unsigned long ea, + unsigned long access, unsigned long trap); + + #ifdef CONFIG_PPC32 extern void mapin_ram(void); extern int map_page(unsigned long va, phys_addr_t pa, int flags); diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index e86c37c82cfd..b3a592b25ab3 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -74,7 +74,7 @@ static struct device_node * __cpuinit find_cpu_node(unsigned int cpu) while ((cpu_node = of_find_node_by_type(cpu_node, "cpu")) != NULL) { /* Try interrupt server first */ - interrupt_server = get_property(cpu_node, + interrupt_server = of_get_property(cpu_node, "ibm,ppc-interrupt-server#s", &len); len = len / sizeof(u32); @@ -85,7 +85,7 @@ static struct device_node * __cpuinit find_cpu_node(unsigned int cpu) return cpu_node; } } else { - reg = get_property(cpu_node, "reg", &len); + reg = of_get_property(cpu_node, "reg", &len); if (reg && (len > 0) && (reg[0] == hw_cpuid)) return cpu_node; } @@ -97,7 +97,7 @@ static struct device_node * __cpuinit find_cpu_node(unsigned int cpu) /* must hold reference to node during call */ static const int *of_get_associativity(struct device_node *dev) { - return get_property(dev, "ibm,associativity", NULL); + return of_get_property(dev, "ibm,associativity", NULL); } /* Returns nid in the range [0..MAX_NUMNODES-1], or -1 if no useful numa @@ -179,7 +179,7 @@ static int __init find_min_common_depth(void) * configuration (should be all 0's) and the second is for a normal * NUMA configuration. */ - ref_points = get_property(rtas_root, + ref_points = of_get_property(rtas_root, "ibm,associativity-reference-points", &len); if ((len >= 1) && ref_points) { @@ -201,8 +201,8 @@ static void __init get_n_mem_cells(int *n_addr_cells, int *n_size_cells) if (!memory) panic("numa.c: No memory nodes found!"); - *n_addr_cells = prom_n_addr_cells(memory); - *n_size_cells = prom_n_size_cells(memory); + *n_addr_cells = of_n_addr_cells(memory); + *n_size_cells = of_n_size_cells(memory); of_node_put(memory); } @@ -308,9 +308,9 @@ static void __init parse_drconf_memory(struct device_node *memory) int nid, default_nid = 0; unsigned int start, ai, flags; - lm = get_property(memory, "ibm,lmb-size", &ls); - dm = get_property(memory, "ibm,dynamic-memory", &ld); - aa = get_property(memory, "ibm,associativity-lookup-arrays", &la); + lm = of_get_property(memory, "ibm,lmb-size", &ls); + dm = of_get_property(memory, "ibm,dynamic-memory", &ld); + aa = of_get_property(memory, "ibm,associativity-lookup-arrays", &la); if (!lm || !dm || !aa || ls < sizeof(unsigned int) || ld < sizeof(unsigned int) || la < 2 * sizeof(unsigned int)) @@ -404,10 +404,10 @@ static int __init parse_numa_properties(void) const unsigned int *memcell_buf; unsigned int len; - memcell_buf = get_property(memory, + memcell_buf = of_get_property(memory, "linux,usable-memory", &len); if (!memcell_buf || len <= 0) - memcell_buf = get_property(memory, "reg", &len); + memcell_buf = of_get_property(memory, "reg", &len); if (!memcell_buf || len <= 0) continue; @@ -725,7 +725,7 @@ int hot_add_scn_to_nid(unsigned long scn_addr) const unsigned int *memcell_buf; unsigned int len; - memcell_buf = get_property(memory, "reg", &len); + memcell_buf = of_get_property(memory, "reg", &len); if (!memcell_buf || len <= 0) continue; diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c index c284bdac9947..bca560374927 100644 --- a/arch/powerpc/mm/pgtable_32.c +++ b/arch/powerpc/mm/pgtable_32.c @@ -183,8 +183,8 @@ __ioremap(phys_addr_t addr, unsigned long size, unsigned long flags) * mem_init() sets high_memory so only do the check after that. */ if (mem_init_done && (p < virt_to_phys(high_memory))) { - printk("__ioremap(): phys addr "PHYS_FMT" is RAM lr %p\n", p, - __builtin_return_address(0)); + printk("__ioremap(): phys addr 0x%llx is RAM lr %p\n", + (unsigned long long)p, __builtin_return_address(0)); return NULL; } @@ -266,9 +266,12 @@ int map_page(unsigned long va, phys_addr_t pa, int flags) pg = pte_alloc_kernel(pd, va); if (pg != 0) { err = 0; - set_pte_at(&init_mm, va, pg, pfn_pte(pa >> PAGE_SHIFT, __pgprot(flags))); - if (mem_init_done) - flush_HPTE(0, va, pmd_val(*pd)); + /* The PTE should never be already set nor present in the + * hash table + */ + BUG_ON(pte_val(*pg) & (_PAGE_PRESENT | _PAGE_HASHPTE)); + set_pte_at(&init_mm, va, pg, pfn_pte(pa >> PAGE_SHIFT, + __pgprot(flags))); } return err; } @@ -279,16 +282,19 @@ int map_page(unsigned long va, phys_addr_t pa, int flags) void __init mapin_ram(void) { unsigned long v, p, s, f; + int ktext; s = mmu_mapin_ram(); v = KERNELBASE + s; p = PPC_MEMSTART + s; for (; s < total_lowmem; s += PAGE_SIZE) { - if ((char *) v >= _stext && (char *) v < etext) - f = _PAGE_RAM_TEXT; - else - f = _PAGE_RAM; + ktext = ((char *) v >= _stext && (char *) v < etext); + f = ktext ?_PAGE_RAM_TEXT : _PAGE_RAM; map_page(v, p, f); +#ifdef CONFIG_PPC_STD_MMU_32 + if (ktext) + hash_preload(&init_mm, v, 0, 0x300); +#endif v += PAGE_SIZE; p += PAGE_SIZE; } @@ -445,3 +451,55 @@ exit: return ret; } +#ifdef CONFIG_DEBUG_PAGEALLOC + +static int __change_page_attr(struct page *page, pgprot_t prot) +{ + pte_t *kpte; + pmd_t *kpmd; + unsigned long address; + + BUG_ON(PageHighMem(page)); + address = (unsigned long)page_address(page); + + if (v_mapped_by_bats(address) || v_mapped_by_tlbcam(address)) + return 0; + if (!get_pteptr(&init_mm, address, &kpte, &kpmd)) + return -EINVAL; + set_pte_at(&init_mm, address, kpte, mk_pte(page, prot)); + wmb(); + flush_HPTE(0, address, pmd_val(*kpmd)); + pte_unmap(kpte); + + return 0; +} + +/* + * Change the page attributes of an page in the linear mapping. + * + * THIS CONFLICTS WITH BAT MAPPINGS, DEBUG USE ONLY + */ +static int change_page_attr(struct page *page, int numpages, pgprot_t prot) +{ + int i, err = 0; + unsigned long flags; + + local_irq_save(flags); + for (i = 0; i < numpages; i++, page++) { + err = __change_page_attr(page, prot); + if (err) + break; + } + local_irq_restore(flags); + return err; +} + + +void kernel_map_pages(struct page *page, int numpages, int enable) +{ + if (PageHighMem(page)) + return; + + change_page_attr(page, numpages, enable ? PAGE_KERNEL : __pgprot(0)); +} +#endif /* CONFIG_DEBUG_PAGEALLOC */ diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c index 7cceb2c44cb9..05066674a7a0 100644 --- a/arch/powerpc/mm/ppc_mmu_32.c +++ b/arch/powerpc/mm/ppc_mmu_32.c @@ -85,8 +85,10 @@ unsigned long __init mmu_mapin_ram(void) unsigned long max_size = (256<<20); unsigned long align; - if (__map_without_bats) + if (__map_without_bats) { + printk(KERN_DEBUG "RAM mapped without BATs\n"); return 0; + } /* Set up BAT2 and if necessary BAT3 to cover RAM. */ diff --git a/arch/powerpc/mm/tlb_64.c b/arch/powerpc/mm/tlb_64.c index b58baa65c4a7..fd8d08c325eb 100644 --- a/arch/powerpc/mm/tlb_64.c +++ b/arch/powerpc/mm/tlb_64.c @@ -120,17 +120,20 @@ void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf) } /* - * Update the MMU hash table to correspond with a change to - * a Linux PTE. If wrprot is true, it is permissible to - * change the existing HPTE to read-only rather than removing it - * (if we remove it we should clear the _PTE_HPTEFLAGS bits). + * A linux PTE was changed and the corresponding hash table entry + * neesd to be flushed. This function will either perform the flush + * immediately or will batch it up if the current CPU has an active + * batch on it. + * + * Must be called from within some kind of spinlock/non-preempt region... */ -void hpte_update(struct mm_struct *mm, unsigned long addr, - pte_t *ptep, unsigned long pte, int huge) +void hpte_need_flush(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, unsigned long pte, int huge) { struct ppc64_tlb_batch *batch = &__get_cpu_var(ppc64_tlb_batch); - unsigned long vsid; + unsigned long vsid, vaddr; unsigned int psize; + real_pte_t rpte; int i; i = batch->index; @@ -151,6 +154,26 @@ void hpte_update(struct mm_struct *mm, unsigned long addr, } else psize = pte_pagesize_index(pte); + /* Build full vaddr */ + if (!is_kernel_addr(addr)) { + vsid = get_vsid(mm->context.id, addr); + WARN_ON(vsid == 0); + } else + vsid = get_kernel_vsid(addr); + vaddr = (vsid << 28 ) | (addr & 0x0fffffff); + rpte = __real_pte(__pte(pte), ptep); + + /* + * Check if we have an active batch on this CPU. If not, just + * flush now and return. For now, we don global invalidates + * in that case, might be worth testing the mm cpu mask though + * and decide to use local invalidates instead... + */ + if (!batch->active) { + flush_hash_page(vaddr, rpte, psize, 0); + return; + } + /* * This can happen when we are in the middle of a TLB batch and * we encounter memory pressure (eg copy_page_range when it tries @@ -162,47 +185,42 @@ void hpte_update(struct mm_struct *mm, unsigned long addr, * batch */ if (i != 0 && (mm != batch->mm || batch->psize != psize)) { - flush_tlb_pending(); + __flush_tlb_pending(batch); i = 0; } if (i == 0) { batch->mm = mm; batch->psize = psize; } - if (!is_kernel_addr(addr)) { - vsid = get_vsid(mm->context.id, addr); - WARN_ON(vsid == 0); - } else - vsid = get_kernel_vsid(addr); - batch->vaddr[i] = (vsid << 28 ) | (addr & 0x0fffffff); - batch->pte[i] = __real_pte(__pte(pte), ptep); + batch->pte[i] = rpte; + batch->vaddr[i] = vaddr; batch->index = ++i; if (i >= PPC64_TLB_BATCH_NR) - flush_tlb_pending(); + __flush_tlb_pending(batch); } +/* + * This function is called when terminating an mmu batch or when a batch + * is full. It will perform the flush of all the entries currently stored + * in a batch. + * + * Must be called from within some kind of spinlock/non-preempt region... + */ void __flush_tlb_pending(struct ppc64_tlb_batch *batch) { - int i; - int cpu; cpumask_t tmp; - int local = 0; + int i, local = 0; - BUG_ON(in_interrupt()); - - cpu = get_cpu(); i = batch->index; - tmp = cpumask_of_cpu(cpu); + tmp = cpumask_of_cpu(smp_processor_id()); if (cpus_equal(batch->mm->cpu_vm_mask, tmp)) local = 1; - if (i == 1) flush_hash_page(batch->vaddr[0], batch->pte[0], batch->psize, local); else flush_hash_range(i, local); batch->index = 0; - put_cpu(); } void pte_free_finish(void) diff --git a/arch/powerpc/oprofile/Makefile b/arch/powerpc/oprofile/Makefile index 4ccef2d5530c..4b5f9528218c 100644 --- a/arch/powerpc/oprofile/Makefile +++ b/arch/powerpc/oprofile/Makefile @@ -12,6 +12,6 @@ DRIVER_OBJS := $(addprefix ../../../drivers/oprofile/, \ oprofile-y := $(DRIVER_OBJS) common.o backtrace.o oprofile-$(CONFIG_PPC_CELL_NATIVE) += op_model_cell.o -oprofile-$(CONFIG_PPC64) += op_model_rs64.o op_model_power4.o +oprofile-$(CONFIG_PPC64) += op_model_rs64.o op_model_power4.o op_model_pa6t.o oprofile-$(CONFIG_FSL_BOOKE) += op_model_fsl_booke.o oprofile-$(CONFIG_6xx) += op_model_7450.o diff --git a/arch/powerpc/oprofile/common.c b/arch/powerpc/oprofile/common.c index fbd62eacfdf4..1a7ef7e246d2 100644 --- a/arch/powerpc/oprofile/common.c +++ b/arch/powerpc/oprofile/common.c @@ -160,6 +160,9 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) case PPC_OPROFILE_POWER4: model = &op_model_power4; break; + case PPC_OPROFILE_PA6T: + model = &op_model_pa6t; + break; #endif #ifdef CONFIG_6xx case PPC_OPROFILE_G4: diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c index e08e1d7b3dc5..626b29f38304 100644 --- a/arch/powerpc/oprofile/op_model_cell.c +++ b/arch/powerpc/oprofile/op_model_cell.c @@ -37,6 +37,7 @@ #include <asm/system.h> #include "../platforms/cell/interrupt.h" +#include "../platforms/cell/cbe_regs.h" #define PPU_CYCLES_EVENT_NUM 1 /* event number for CYCLES */ #define PPU_CYCLES_GRP_NUM 1 /* special group number for identifying @@ -130,7 +131,7 @@ static int pm_rtas_token; static u32 reset_value[NR_PHYS_CTRS]; static int num_counters; static int oprofile_running; -static spinlock_t virt_cntr_lock = SPIN_LOCK_UNLOCKED; +static DEFINE_SPINLOCK(virt_cntr_lock); static u32 ctr_enabled; diff --git a/arch/powerpc/oprofile/op_model_pa6t.c b/arch/powerpc/oprofile/op_model_pa6t.c new file mode 100644 index 000000000000..e8a56b0adadc --- /dev/null +++ b/arch/powerpc/oprofile/op_model_pa6t.c @@ -0,0 +1,234 @@ +/* + * Copyright (C) 2006-2007 PA Semi, Inc + * + * Author: Shashi Rao, PA Semi + * + * Maintained by: Olof Johansson <olof@lixom.net> + * + * Based on arch/powerpc/oprofile/op_model_power4.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/oprofile.h> +#include <linux/init.h> +#include <linux/smp.h> +#include <linux/percpu.h> +#include <asm/processor.h> +#include <asm/cputable.h> +#include <asm/oprofile_impl.h> +#include <asm/reg.h> + +static unsigned char oprofile_running; + +/* mmcr values are set in pa6t_reg_setup, used in pa6t_cpu_setup */ +static u64 mmcr0_val; +static u64 mmcr1_val; + +/* inited in pa6t_reg_setup */ +static u64 reset_value[OP_MAX_COUNTER]; + +static inline u64 ctr_read(unsigned int i) +{ + switch (i) { + case 0: + return mfspr(SPRN_PA6T_PMC0); + case 1: + return mfspr(SPRN_PA6T_PMC1); + case 2: + return mfspr(SPRN_PA6T_PMC2); + case 3: + return mfspr(SPRN_PA6T_PMC3); + case 4: + return mfspr(SPRN_PA6T_PMC4); + case 5: + return mfspr(SPRN_PA6T_PMC5); + default: + printk(KERN_ERR "ctr_read called with bad arg %u\n", i); + return 0; + } +} + +static inline void ctr_write(unsigned int i, u64 val) +{ + switch (i) { + case 0: + mtspr(SPRN_PA6T_PMC0, val); + break; + case 1: + mtspr(SPRN_PA6T_PMC1, val); + break; + case 2: + mtspr(SPRN_PA6T_PMC2, val); + break; + case 3: + mtspr(SPRN_PA6T_PMC3, val); + break; + case 4: + mtspr(SPRN_PA6T_PMC4, val); + break; + case 5: + mtspr(SPRN_PA6T_PMC5, val); + break; + default: + printk(KERN_ERR "ctr_write called with bad arg %u\n", i); + break; + } +} + + +/* precompute the values to stuff in the hardware registers */ +static void pa6t_reg_setup(struct op_counter_config *ctr, + struct op_system_config *sys, + int num_ctrs) +{ + int pmc; + + /* + * adjust the mmcr0.en[0-5] and mmcr0.inten[0-5] values obtained from the + * event_mappings file by turning off the counters that the user doesn't + * care about + * + * setup user and kernel profiling + */ + for (pmc = 0; pmc < cur_cpu_spec->num_pmcs; pmc++) + if (!ctr[pmc].enabled) { + sys->mmcr0 &= ~(0x1UL << pmc); + sys->mmcr0 &= ~(0x1UL << (pmc+12)); + pr_debug("turned off counter %u\n", pmc); + } + + if (sys->enable_kernel) + sys->mmcr0 |= PA6T_MMCR0_SUPEN | PA6T_MMCR0_HYPEN; + else + sys->mmcr0 &= ~(PA6T_MMCR0_SUPEN | PA6T_MMCR0_HYPEN); + + if (sys->enable_user) + sys->mmcr0 |= PA6T_MMCR0_PREN; + else + sys->mmcr0 &= ~PA6T_MMCR0_PREN; + + /* + * The performance counter event settings are given in the mmcr0 and + * mmcr1 values passed from the user in the op_system_config + * structure (sys variable). + */ + mmcr0_val = sys->mmcr0; + mmcr1_val = sys->mmcr1; + pr_debug("mmcr0_val inited to %016lx\n", sys->mmcr0); + pr_debug("mmcr1_val inited to %016lx\n", sys->mmcr1); + + for (pmc = 0; pmc < cur_cpu_spec->num_pmcs; pmc++) { + /* counters are 40 bit. Move to cputable at some point? */ + reset_value[pmc] = (0x1UL << 39) - ctr[pmc].count; + pr_debug("reset_value for pmc%u inited to 0x%lx\n", + pmc, reset_value[pmc]); + } +} + +/* configure registers on this cpu */ +static void pa6t_cpu_setup(struct op_counter_config *ctr) +{ + u64 mmcr0 = mmcr0_val; + u64 mmcr1 = mmcr1_val; + + /* Default is all PMCs off */ + mmcr0 &= ~(0x3FUL); + mtspr(SPRN_PA6T_MMCR0, mmcr0); + + /* program selected programmable events in */ + mtspr(SPRN_PA6T_MMCR1, mmcr1); + + pr_debug("setup on cpu %d, mmcr0 %016lx\n", smp_processor_id(), + mfspr(SPRN_PA6T_MMCR0)); + pr_debug("setup on cpu %d, mmcr1 %016lx\n", smp_processor_id(), + mfspr(SPRN_PA6T_MMCR1)); +} + +static void pa6t_start(struct op_counter_config *ctr) +{ + int i; + + /* Hold off event counting until rfid */ + u64 mmcr0 = mmcr0_val | PA6T_MMCR0_HANDDIS; + + for (i = 0; i < cur_cpu_spec->num_pmcs; i++) + if (ctr[i].enabled) + ctr_write(i, reset_value[i]); + else + ctr_write(i, 0UL); + + mtspr(SPRN_PA6T_MMCR0, mmcr0); + + oprofile_running = 1; + + pr_debug("start on cpu %d, mmcr0 %lx\n", smp_processor_id(), mmcr0); +} + +static void pa6t_stop(void) +{ + u64 mmcr0; + + /* freeze counters */ + mmcr0 = mfspr(SPRN_PA6T_MMCR0); + mmcr0 |= PA6T_MMCR0_FCM0; + mtspr(SPRN_PA6T_MMCR0, mmcr0); + + oprofile_running = 0; + + pr_debug("stop on cpu %d, mmcr0 %lx\n", smp_processor_id(), mmcr0); +} + +/* handle the perfmon overflow vector */ +static void pa6t_handle_interrupt(struct pt_regs *regs, + struct op_counter_config *ctr) +{ + unsigned long pc = mfspr(SPRN_PA6T_SIAR); + int is_kernel = is_kernel_addr(pc); + u64 val; + int i; + u64 mmcr0; + + /* disable perfmon counting until rfid */ + mmcr0 = mfspr(SPRN_PA6T_MMCR0); + mtspr(SPRN_PA6T_MMCR0, mmcr0 | PA6T_MMCR0_HANDDIS); + + /* Record samples. We've got one global bit for whether a sample + * was taken, so add it for any counter that triggered overflow. + */ + for (i = 0; i < cur_cpu_spec->num_pmcs; i++) { + val = ctr_read(i); + if (val & (0x1UL << 39)) { /* Overflow bit set */ + if (oprofile_running && ctr[i].enabled) { + if (mmcr0 & PA6T_MMCR0_SIARLOG) + oprofile_add_ext_sample(pc, regs, i, is_kernel); + ctr_write(i, reset_value[i]); + } else { + ctr_write(i, 0UL); + } + } + } + + /* Restore mmcr0 to a good known value since the PMI changes it */ + mmcr0 = mmcr0_val | PA6T_MMCR0_HANDDIS; + mtspr(SPRN_PA6T_MMCR0, mmcr0); +} + +struct op_powerpc_model op_model_pa6t = { + .reg_setup = pa6t_reg_setup, + .cpu_setup = pa6t_cpu_setup, + .start = pa6t_start, + .stop = pa6t_stop, + .handle_interrupt = pa6t_handle_interrupt, +}; diff --git a/arch/powerpc/platforms/4xx/Kconfig b/arch/powerpc/platforms/4xx/Kconfig index 2f2a13ed7667..ded357c17414 100644 --- a/arch/powerpc/platforms/4xx/Kconfig +++ b/arch/powerpc/platforms/4xx/Kconfig @@ -3,278 +3,206 @@ config 4xx depends on 40x || 44x default y -config WANT_EARLY_SERIAL +config BOOKE bool - select SERIAL_8250 - default n - -menu "AMCC 4xx options" - depends on 4xx - -choice - prompt "Machine Type" - depends on 40x - default WALNUT - -config BUBINGA - bool "Bubinga" - select WANT_EARLY_SERIAL - help - This option enables support for the IBM 405EP evaluation board. - -config CPCI405 - bool "CPCI405" - help - This option enables support for the CPCI405 board. - -config EP405 - bool "EP405/EP405PC" - help - This option enables support for the EP405/EP405PC boards. - -config REDWOOD_5 - bool "Redwood-5" - help - This option enables support for the IBM STB04 evaluation board. - -config REDWOOD_6 - bool "Redwood-6" - help - This option enables support for the IBM STBx25xx evaluation board. - -config SYCAMORE - bool "Sycamore" - help - This option enables support for the IBM PPC405GPr evaluation board. - -config WALNUT - bool "Walnut" - help - This option enables support for the IBM PPC405GP evaluation board. - -config XILINX_ML300 - bool "Xilinx-ML300" - help - This option enables support for the Xilinx ML300 evaluation board. - -endchoice - -choice - prompt "Machine Type" depends on 44x - default EBONY - -config BAMBOO - bool "Bamboo" - select WANT_EARLY_SERIAL - help - This option enables support for the IBM PPC440EP evaluation board. - -config EBONY - bool "Ebony" - select WANT_EARLY_SERIAL - help - This option enables support for the IBM PPC440GP evaluation board. - -config LUAN - bool "Luan" - select WANT_EARLY_SERIAL - help - This option enables support for the IBM PPC440SP evaluation board. - -config OCOTEA - bool "Ocotea" - select WANT_EARLY_SERIAL - help - This option enables support for the IBM PPC440GX evaluation board. + default y -endchoice +menu "AMCC 40x options" + depends on 40x -config EP405PC - bool "EP405PC Support" - depends on EP405 +#config BUBINGA +# bool "Bubinga" +# depends on 40x +# default n +# select 405EP +# help +# This option enables support for the IBM 405EP evaluation board. + +#config CPCI405 +# bool "CPCI405" +# depends on 40x +# default n +# select 405GP +# help +# This option enables support for the CPCI405 board. + +#config EP405 +# bool "EP405/EP405PC" +# depends on 40x +# default n +# select 405GP +# help +# This option enables support for the EP405/EP405PC boards. + +#config EP405PC +# bool "EP405PC Support" +# depends on EP405 +# default y +# help +# This option enables support for the extra features of the EP405PC board. + +#config REDWOOD_5 +# bool "Redwood-5" +# depends on 40x +# default n +# select STB03xxx +# help +# This option enables support for the IBM STB04 evaluation board. + +#config REDWOOD_6 +# bool "Redwood-6" +# depends on 40x +# default n +# select STB03xxx +# help +# This option enables support for the IBM STBx25xx evaluation board. + +#config SYCAMORE +# bool "Sycamore" +# depends on 40x +# default n +# select 405GPR +# help +# This option enables support for the IBM PPC405GPr evaluation board. + +#config WALNUT +# bool "Walnut" +# depends on 40x +# default y +# select 405GP +# help +# This option enables support for the IBM PPC405GP evaluation board. + +#config XILINX_ML300 +# bool "Xilinx-ML300" +# depends on 40x +# default y +# select VIRTEX_II_PRO +# help +# This option enables support for the Xilinx ML300 evaluation board. +endmenu -# It's often necessary to know the specific 4xx processor type. -# Fortunately, it is impled (so far) from the board type, so we -# don't need to ask more redundant questions. +# 40x specific CPU modules, selected based on the board above. config NP405H bool - depends on ASH - default y + #depends on ASH -config 440EP +# OAK doesn't exist but wanted to keep this around for any future 403GCX boards +config 403GCX bool - depends on BAMBOO - select PPC_FPU - default y + #depends on OAK + select IBM405_ERR51 -config 440GP +config 405GP bool - depends on EBONY - default y + select IBM405_ERR77 + select IBM405_ERR51 -config 440GX +config 405EP bool - depends on OCOTEA - default y -config 440SP +config 405GPR bool - depends on LUAN - default y -config 440 +config VIRTEX_II_PRO bool - depends on 440GP || 440SP || 440EP - default y + select IBM405_ERR77 + select IBM405_ERR51 -config 440A +config STB03xxx bool - depends on 440GX - default y + select IBM405_ERR77 + select IBM405_ERR51 -config IBM440EP_ERR42 - bool - depends on 440EP - default y +# 40x errata/workaround config symbols, selected by the CPU models above # All 405-based cores up until the 405GPR and 405EP have this errata. config IBM405_ERR77 bool - depends on 40x && !403GCX && !405GPR && !405EP - default y # All 40x-based cores, up until the 405GPR and 405EP have this errata. config IBM405_ERR51 bool - depends on 40x && !405GPR && !405EP - default y -config BOOKE - bool +menu "AMCC 44x options" depends on 44x - default y - -config IBM_OCP - bool - depends on ASH || BAMBOO || BUBINGA || CPCI405 || EBONY || EP405 || LUAN || OCOTEA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT - default y -config XILINX_OCP - bool - depends on XILINX_ML300 - default y +#config BAMBOO +# bool "Bamboo" +# depends on 44x +# default n +# select 440EP +# help +# This option enables support for the IBM PPC440EP evaluation board. -config IBM_EMAC4 - bool - depends on 440GX || 440SP - default y - -config BIOS_FIXUP - bool - depends on BUBINGA || EP405 || SYCAMORE || WALNUT - default y - -# OAK doesn't exist but wanted to keep this around for any future 403GCX boards -config 403GCX - bool - depends on OAK - default y - -config 405EP - bool - depends on BUBINGA - default y - -config 405GP - bool - depends on CPCI405 || EP405 || WALNUT - default y - -config 405GPR - bool - depends on SYCAMORE +config EBONY + bool "Ebony" + depends on 44x default y + select 440GP + help + This option enables support for the IBM PPC440GP evaluation board. -config VIRTEX_II_PRO - bool - depends on XILINX_ML300 - default y +#config LUAN +# bool "Luan" +# depends on 44x +# default n +# select 440SP +# help +# This option enables support for the IBM PPC440SP evaluation board. + +#config OCOTEA +# bool "Ocotea" +# depends on 44x +# default n +# select 440GX +# help +# This option enables support for the IBM PPC440GX evaluation board. -config STB03xxx - bool - depends on REDWOOD_5 || REDWOOD_6 - default y +endmenu -config EMBEDDEDBOOT +# 44x specific CPU modules, selected based on the board above. +config 440EP bool - depends on EP405 || XILINX_ML300 - default y + select PPC_FPU + select IBM440EP_ERR42 -config IBM_OPENBIOS +config 440GP bool - depends on ASH || BUBINGA || REDWOOD_5 || REDWOOD_6 || SYCAMORE || WALNUT - default y + select IBM_NEW_EMAC_ZMII -config PPC4xx_DMA - bool "PPC4xx DMA controller support" - depends on 4xx - -config PPC4xx_EDMA +config 440GX bool - depends on !STB03xxx && PPC4xx_DMA - default y -config PPC_GEN550 +config 440SP bool - depends on 4xx - default y - -choice - prompt "TTYS0 device and default console" - depends on 40x - default UART0_TTYS0 - -config UART0_TTYS0 - bool "UART0" -config UART0_TTYS1 - bool "UART1" - -endchoice - -config SERIAL_SICC - bool "SICC Serial port support" - depends on STB03xxx - -config UART1_DFLT_CONSOLE +config 440A bool - depends on SERIAL_SICC && UART0_TTYS1 + depends on 440GX default y -config SERIAL_SICC_CONSOLE +# 44x errata/workaround config symbols, selected by the CPU models above +config IBM440EP_ERR42 bool - depends on SERIAL_SICC && UART0_TTYS1 - default y -endmenu +#config XILINX_OCP +# bool +# depends on XILINX_ML300 +# default y -menu "IBM 40x options" - depends on 40x - -config SERIAL_SICC - bool "SICC Serial port" - depends on STB03xxx - -config UART1_DFLT_CONSOLE - bool - depends on SERIAL_SICC && UART0_TTYS1 - default y +#config BIOS_FIXUP +# bool +# depends on BUBINGA || EP405 || SYCAMORE || WALNUT +# default y -config SERIAL_SICC_CONSOLE - bool - depends on SERIAL_SICC && UART0_TTYS1 - default y +#config PPC4xx_DMA +# bool "PPC4xx DMA controller support" +# depends on 4xx -endmenu +#config PPC4xx_EDMA +# bool +# depends on !STB03xxx && PPC4xx_DMA +# default y diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig new file mode 100644 index 000000000000..bc4aa4a80a12 --- /dev/null +++ b/arch/powerpc/platforms/52xx/Kconfig @@ -0,0 +1,35 @@ +config PPC_MPC52xx + bool + default n + +config PPC_MPC5200 + bool + select PPC_MPC52xx + default n + +config PPC_MPC5200_BUGFIX + bool "MPC5200 (L25R) bugfix support" + depends on PPC_MPC5200 + default n + help + Enable workarounds for original MPC5200 errata. This is not required + for MPC5200B based boards. + + It is safe to say 'Y' here + +config PPC_EFIKA + bool "bPlan Efika 5k2. MPC5200B based computer" + depends on PPC_MULTIPLATFORM && PPC32 + select PPC_RTAS + select RTAS_PROC + select PPC_MPC52xx + select PPC_NATIVE + default n + +config PPC_LITE5200 + bool "Freescale Lite5200 Eval Board" + depends on PPC_MULTIPLATFORM && PPC32 + select PPC_MPC5200 + default n + + diff --git a/arch/powerpc/platforms/52xx/efika.c b/arch/powerpc/platforms/52xx/efika.c index 8de034116681..a6bba97314eb 100644 --- a/arch/powerpc/platforms/52xx/efika.c +++ b/arch/powerpc/platforms/52xx/efika.c @@ -112,7 +112,7 @@ void __init efika_pcisetup(void) return; } - bus_range = get_property(pcictrl, "bus-range", &len); + bus_range = of_get_property(pcictrl, "bus-range", &len); if (bus_range == NULL || len < 2 * sizeof(int)) { printk(KERN_WARNING EFIKA_PLATFORM_NAME ": Can't get bus-range for %s\n", pcictrl->full_name); @@ -158,18 +158,17 @@ void __init efika_pcisetup(void) static void efika_show_cpuinfo(struct seq_file *m) { struct device_node *root; - const char *revision = NULL; - const char *codegendescription = NULL; - const char *codegenvendor = NULL; + const char *revision; + const char *codegendescription; + const char *codegenvendor; root = of_find_node_by_path("/"); if (!root) return; - revision = get_property(root, "revision", NULL); - codegendescription = - get_property(root, "CODEGEN,description", NULL); - codegenvendor = get_property(root, "CODEGEN,vendor", NULL); + revision = of_get_property(root, "revision", NULL); + codegendescription = of_get_property(root, "CODEGEN,description", NULL); + codegenvendor = of_get_property(root, "CODEGEN,vendor", NULL); if (codegendescription) seq_printf(m, "machine\t\t: %s\n", codegendescription); diff --git a/arch/powerpc/platforms/52xx/lite5200.c b/arch/powerpc/platforms/52xx/lite5200.c index cc3b40de21dd..8e2646ac417b 100644 --- a/arch/powerpc/platforms/52xx/lite5200.c +++ b/arch/powerpc/platforms/52xx/lite5200.c @@ -94,8 +94,8 @@ static void __init lite5200_setup_arch(void) np = of_find_node_by_type(NULL, "cpu"); if (np) { - unsigned int *fp = - (int *)get_property(np, "clock-frequency", NULL); + const unsigned int *fp = + of_get_property(np, "clock-frequency", NULL); if (fp != 0) loops_per_jiffy = *fp / HZ; else @@ -108,9 +108,11 @@ static void __init lite5200_setup_arch(void) lite5200_setup_cpu(); /* Platorm specific */ #ifdef CONFIG_PCI - np = of_find_node_by_type(np, "pci"); - if (np) + np = of_find_node_by_type(NULL, "pci"); + if (np) { mpc52xx_add_bridge(np); + of_node_put(np); + } #endif #ifdef CONFIG_BLK_DEV_INITRD @@ -132,7 +134,7 @@ void lite5200_show_cpuinfo(struct seq_file *m) const char *model = NULL; if (np) - model = get_property(np, "model", NULL); + model = of_get_property(np, "model", NULL); seq_printf(m, "vendor\t\t: Freescale Semiconductor\n"); seq_printf(m, "machine\t\t: %s\n", model ? model : "unknown"); diff --git a/arch/powerpc/platforms/52xx/mpc52xx_common.c b/arch/powerpc/platforms/52xx/mpc52xx_common.c index ed0cb694aea8..2dd415ff55a9 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_common.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_common.c @@ -60,7 +60,7 @@ mpc52xx_find_ipb_freq(struct device_node *node) of_node_get(node); while (node) { - p_ipb_freq = get_property(node, "bus-frequency", NULL); + p_ipb_freq = of_get_property(node, "bus-frequency", NULL); if (p_ipb_freq) break; diff --git a/arch/powerpc/platforms/52xx/mpc52xx_pci.c b/arch/powerpc/platforms/52xx/mpc52xx_pci.c index faf161bdbc1c..34d34a26d305 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_pci.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_pci.c @@ -370,7 +370,7 @@ mpc52xx_add_bridge(struct device_node *node) return -EINVAL; } - bus_range = get_property(node, "bus-range", &len); + bus_range = of_get_property(node, "bus-range", &len); if (bus_range == NULL || len < 2 * sizeof(int)) { printk(KERN_WARNING "Can't get %s bus-range, assume bus 0\n", node->full_name); diff --git a/arch/powerpc/platforms/82xx/Kconfig b/arch/powerpc/platforms/82xx/Kconfig index 47d841ecf2e2..de7fce9cb6eb 100644 --- a/arch/powerpc/platforms/82xx/Kconfig +++ b/arch/powerpc/platforms/82xx/Kconfig @@ -1,21 +1,36 @@ -menu "Platform support" - depends on PPC_82xx - choice - prompt "Machine Type" - default MPC82xx_ADS + prompt "Machine Type" + depends on PPC_82xx + default MPC82xx_ADS config MPC82xx_ADS - bool "Freescale MPC82xx ADS" - select DEFAULT_UIMAGE - select PQ2ADS - select 8272 - select 8260 - select CPM2 - select FSL_SOC - help - This option enables support for the MPC8272 ADS board + bool "Freescale MPC82xx ADS" + select DEFAULT_UIMAGE + select PQ2ADS + select 8272 + select 8260 + select FSL_SOC + help + This option enables support for the MPC8272 ADS board endchoice -endmenu +config PQ2ADS + bool + default n + +config 8260 + bool + depends on 6xx + select CPM2 + help + The MPC8260 is a typical embedded CPU made by Freescale. Selecting + this option means that you wish to build a kernel for a machine with + an 8260 class CPU. + +config 8272 + bool + select 8260 + help + The MPC8272 CPM has a different internal dpram setup than other CPM2 + devices diff --git a/arch/powerpc/platforms/82xx/mpc82xx.c b/arch/powerpc/platforms/82xx/mpc82xx.c index 74e7892cdfcf..cc9900d2e5ee 100644 --- a/arch/powerpc/platforms/82xx/mpc82xx.c +++ b/arch/powerpc/platforms/82xx/mpc82xx.c @@ -55,17 +55,17 @@ static int __init get_freq(char *name, unsigned long *val) { struct device_node *cpu; - unsigned int *fp; + const unsigned int *fp; int found = 0; /* The cpu node should have timebase and clock frequency properties */ cpu = of_find_node_by_type(NULL, "cpu"); if (cpu) { - fp = (unsigned int *)get_property(cpu, name, NULL); + fp = of_get_property(cpu, name, NULL); if (fp) { found = 1; - *val = *fp++; + *val = *fp; } of_node_put(cpu); diff --git a/arch/powerpc/platforms/82xx/mpc82xx_ads.c b/arch/powerpc/platforms/82xx/mpc82xx_ads.c index 7334c1a15b90..47cb09f08052 100644 --- a/arch/powerpc/platforms/82xx/mpc82xx_ads.c +++ b/arch/powerpc/platforms/82xx/mpc82xx_ads.c @@ -456,7 +456,7 @@ void m82xx_pci_init_irq(void) iounmap(immap); return; } - irq_map = get_property(np, "interrupt-map", &size); + irq_map = of_get_property(np, "interrupt-map", &size); if ((!irq_map) || (size <= 7)) { printk(KERN_INFO "No interrupt-map property of pci node\n"); iounmap(immap); @@ -481,7 +481,7 @@ void m82xx_pci_init_irq(void) } pci_pic_node = of_node_get(np); /* PCI interrupt controller registers: status and mask */ - regs = get_property(np, "reg", &size); + regs = of_get_property(np, "reg", &size); if ((!regs) || (size <= 2)) { printk(KERN_INFO "No reg property in pci pic node\n"); iounmap(immap); @@ -521,20 +521,20 @@ void __init add_bridge(struct device_node *np) struct pci_controller *hose; struct resource r; const int *bus_range; - const void *ptr; + const uint *ptr; memset(&r, 0, sizeof(r)); if (of_address_to_resource(np, 0, &r)) { printk(KERN_INFO "No PCI reg property in device tree\n"); return; } - if (!(ptr = get_property(np, "clock-frequency", NULL))) { + if (!(ptr = of_get_property(np, "clock-frequency", NULL))) { printk(KERN_INFO "No clock-frequency property in PCI node"); return; } - pci_clk_frq = *(uint *) ptr; + pci_clk_frq = *ptr; of_node_put(np); - bus_range = get_property(np, "bus-range", &len); + bus_range = of_get_property(np, "bus-range", &len); if (bus_range == NULL || len < 2 * sizeof(int)) { printk(KERN_WARNING "Can't get bus-range for %s, assume" " bus 0\n", np->full_name); diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig index 713b31a16ce9..19cafdf6df93 100644 --- a/arch/powerpc/platforms/83xx/Kconfig +++ b/arch/powerpc/platforms/83xx/Kconfig @@ -1,8 +1,6 @@ -menu "Platform support" - depends on PPC_83xx - choice prompt "Machine Type" + depends on PPC_83xx default MPC834x_MDS config MPC8313_RDB @@ -18,6 +16,13 @@ config MPC832x_MDS help This option enables support for the MPC832x MDS evaluation board. +config MPC832x_RDB + bool "Freescale MPC832x RDB" + select DEFAULT_UIMAGE + select QUICC_ENGINE + help + This option enables support for the MPC8323 RDB board. + config MPC834x_MDS bool "Freescale MPC834x MDS" select DEFAULT_UIMAGE @@ -57,7 +62,7 @@ config PPC_MPC832x bool select PPC_UDBG_16550 select PPC_INDIRECT_PCI - default y if MPC832x_MDS + default y if MPC832x_MDS || MPC832x_RDB config MPC834x bool @@ -70,5 +75,3 @@ config PPC_MPC836x select PPC_UDBG_16550 select PPC_INDIRECT_PCI default y if MPC836x_MDS - -endmenu diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile index dfc970d0df10..31a91b53f528 100644 --- a/arch/powerpc/platforms/83xx/Makefile +++ b/arch/powerpc/platforms/83xx/Makefile @@ -4,6 +4,7 @@ obj-y := misc.o obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_MPC8313_RDB) += mpc8313_rdb.o +obj-$(CONFIG_MPC832x_RDB) += mpc832x_rdb.o obj-$(CONFIG_MPC834x_MDS) += mpc834x_mds.o obj-$(CONFIG_MPC834x_ITX) += mpc834x_itx.o obj-$(CONFIG_MPC836x_MDS) += mpc836x_mds.o diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c index 17e3a3c6d8b4..fff09f5d6edf 100644 --- a/arch/powerpc/platforms/83xx/mpc832x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c @@ -41,7 +41,6 @@ #include <asm/qe_ic.h> #include "mpc83xx.h" -#include "mpc832x_mds.h" #undef DEBUG #ifdef DEBUG diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.h b/arch/powerpc/platforms/83xx/mpc832x_mds.h deleted file mode 100644 index a49588904f8a..000000000000 --- a/arch/powerpc/platforms/83xx/mpc832x_mds.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved. - * - * Description: - * MPC832x MDS board specific header. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef __MACH_MPC832x_MDS_H__ -#define __MACH_MPC832x_MDS_H__ - -extern u8 *get_bcsr(void); - -#endif /* __MACH_MPC832x_MDS_H__ */ diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c new file mode 100644 index 000000000000..6b71e9ffb11a --- /dev/null +++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c @@ -0,0 +1,138 @@ +/* + * arch/powerpc/platforms/83xx/mpc832x_rdb.c + * + * Copyright (C) Freescale Semiconductor, Inc. 2007. All rights reserved. + * + * Description: + * MPC832x RDB board specific routines. + * This file is based on mpc832x_mds.c and mpc8313_rdb.c + * Author: Michael Barkowski <michael.barkowski@freescale.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/pci.h> + +#include <asm/of_platform.h> +#include <asm/time.h> +#include <asm/ipic.h> +#include <asm/udbg.h> +#include <asm/qe.h> +#include <asm/qe_ic.h> + +#include "mpc83xx.h" + +#undef DEBUG +#ifdef DEBUG +#define DBG(fmt...) udbg_printf(fmt) +#else +#define DBG(fmt...) +#endif + +#ifndef CONFIG_PCI +unsigned long isa_io_base = 0; +unsigned long isa_mem_base = 0; +#endif + +/* ************************************************************************ + * + * Setup the architecture + * + */ +static void __init mpc832x_rdb_setup_arch(void) +{ + struct device_node *np; + + if (ppc_md.progress) + ppc_md.progress("mpc832x_rdb_setup_arch()", 0); + +#ifdef CONFIG_PCI + for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) + add_bridge(np); + + ppc_md.pci_exclude_device = mpc83xx_exclude_device; +#endif + +#ifdef CONFIG_QUICC_ENGINE + qe_reset(); + + if ((np = of_find_node_by_name(np, "par_io")) != NULL) { + par_io_init(np); + of_node_put(np); + + for (np = NULL; (np = of_find_node_by_name(np, "ucc")) != NULL;) + par_io_of_config(np); + } +#endif /* CONFIG_QUICC_ENGINE */ +} + +static struct of_device_id mpc832x_ids[] = { + { .type = "soc", }, + { .compatible = "soc", }, + { .type = "qe", }, + {}, +}; + +static int __init mpc832x_declare_of_platform_devices(void) +{ + if (!machine_is(mpc832x_rdb)) + return 0; + + /* Publish the QE devices */ + of_platform_bus_probe(NULL, mpc832x_ids, NULL); + + return 0; +} +device_initcall(mpc832x_declare_of_platform_devices); + +void __init mpc832x_rdb_init_IRQ(void) +{ + + struct device_node *np; + + np = of_find_node_by_type(NULL, "ipic"); + if (!np) + return; + + ipic_init(np, 0); + + /* Initialize the default interrupt mapping priorities, + * in case the boot rom changed something on us. + */ + ipic_set_default_priority(); + of_node_put(np); + +#ifdef CONFIG_QUICC_ENGINE + np = of_find_node_by_type(NULL, "qeic"); + if (!np) + return; + + qe_ic_init(np, 0); + of_node_put(np); +#endif /* CONFIG_QUICC_ENGINE */ +} + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init mpc832x_rdb_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "MPC832xRDB"); +} + +define_machine(mpc832x_rdb) { + .name = "MPC832x RDB", + .probe = mpc832x_rdb_probe, + .setup_arch = mpc832x_rdb_setup_arch, + .init_IRQ = mpc832x_rdb_init_IRQ, + .get_irq = ipic_get_irq, + .restart = mpc83xx_restart, + .time_init = mpc83xx_time_init, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.h b/arch/powerpc/platforms/83xx/mpc834x_itx.h deleted file mode 100644 index 174ca4ef55f3..000000000000 --- a/arch/powerpc/platforms/83xx/mpc834x_itx.h +++ /dev/null @@ -1,23 +0,0 @@ -/* - * arch/powerpc/platforms/83xx/mpc834x_itx.h - * - * MPC834X ITX common board definitions - * - * Maintainer: Kumar Gala <galak@kernel.crashing.org> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#ifndef __MACH_MPC83XX_ITX_H__ -#define __MACH_MPC83XX_ITX_H__ - -#define PIRQA MPC83xx_IRQ_EXT4 -#define PIRQB MPC83xx_IRQ_EXT5 -#define PIRQC MPC83xx_IRQ_EXT6 -#define PIRQD MPC83xx_IRQ_EXT7 - -#endif /* __MACH_MPC83XX_ITX_H__ */ diff --git a/arch/powerpc/platforms/83xx/pci.c b/arch/powerpc/platforms/83xx/pci.c index 9c3650555144..774457d09e94 100644 --- a/arch/powerpc/platforms/83xx/pci.c +++ b/arch/powerpc/platforms/83xx/pci.c @@ -60,7 +60,7 @@ int __init add_bridge(struct device_node *dev) has_address = (of_address_to_resource(dev, 0, &rsrc) == 0); /* Get bus range if any */ - bus_range = get_property(dev, "bus-range", &len); + bus_range = of_get_property(dev, "bus-range", &len); if (bus_range == NULL || len < 2 * sizeof(int)) { printk(KERN_WARNING "Can't get bus-range for %s, assume" " bus 0\n", dev->full_name); diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index e764c0aced88..629926e01e90 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -1,8 +1,6 @@ -menu "Platform support" - depends on PPC_85xx - choice prompt "Machine Type" + depends on PPC_85xx default MPC8540_ADS config MPC8540_ADS @@ -30,6 +28,12 @@ config MPC85xx_MDS help This option enables support for the MPC85xx MDS board +config MPC8544_DS + bool "Freescale MPC8544 DS" + select DEFAULT_UIMAGE + help + This option enables support for the MPC8544 DS board + endchoice config MPC8540 @@ -40,33 +44,15 @@ config MPC8540 config MPC8560 bool - select PPC_INDIRECT_PCI + select CPM2 default y if MPC8560_ADS config MPC85xx bool select PPC_UDBG_16550 select PPC_INDIRECT_PCI + select PPC_INDIRECT_PCI_BE + select MPIC select SERIAL_8250_SHARE_IRQ if SERIAL_8250 - default y if MPC8540_ADS || MPC85xx_CDS || MPC8560_ADS || MPC85xx_MDS - -config PPC_INDIRECT_PCI_BE - bool - depends on PPC_85xx - default y - -config MPIC - bool - default y - -config CPM2 - bool - depends on MPC8560 - default y - help - The CPM2 (Communications Processor Module) is a coprocessor on - embedded CPUs made by Motorola. Selecting this option means that - you wish to build a kernel for a machine with a CPM2 coprocessor - on it. - -endmenu + default y if MPC8540_ADS || MPC85xx_CDS || MPC8560_ADS \ + || MPC85xx_MDS || MPC8544_DS diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index 4e63917ada9d..4e02cbb14cf7 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -5,4 +5,5 @@ obj-$(CONFIG_PPC_85xx) += misc.o pci.o obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o obj-$(CONFIG_MPC8560_ADS) += mpc85xx_ads.o obj-$(CONFIG_MPC85xx_CDS) += mpc85xx_cds.o +obj-$(CONFIG_MPC8544_DS) += mpc8544_ds.o obj-$(CONFIG_MPC85xx_MDS) += mpc85xx_mds.o diff --git a/arch/powerpc/platforms/85xx/mpc8544_ds.c b/arch/powerpc/platforms/85xx/mpc8544_ds.c new file mode 100644 index 000000000000..2867f85e6325 --- /dev/null +++ b/arch/powerpc/platforms/85xx/mpc8544_ds.c @@ -0,0 +1,144 @@ +/* + * MPC8544 DS Board Setup + * + * Author Xianghua Xiao (x.xiao@freescale.com) + * Copyright 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/kdev_t.h> +#include <linux/delay.h> +#include <linux/seq_file.h> + +#include <asm/system.h> +#include <asm/time.h> +#include <asm/machdep.h> +#include <asm/mpc85xx.h> +#include <mm/mmu_decl.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <asm/mpic.h> +#include <asm/i8259.h> + +#include <sysdev/fsl_soc.h> +#include "mpc85xx.h" + +#undef DEBUG + +#ifdef DEBUG +#define DBG(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args) +#else +#define DBG(fmt, args...) +#endif + + +void __init mpc8544_ds_pic_init(void) +{ + struct mpic *mpic; + struct resource r; + struct device_node *np = NULL; +#ifdef CONFIG_PPC_I8259 + struct device_node *cascade_node = NULL; + int cascade_irq; +#endif + + np = of_find_node_by_type(np, "open-pic"); + + if (np == NULL) { + printk(KERN_ERR "Could not find open-pic node\n"); + return; + } + + if (of_address_to_resource(np, 0, &r)) { + printk(KERN_ERR "Failed to map mpic register space\n"); + of_node_put(np); + return; + } + + /* Alloc mpic structure and per isu has 16 INT entries. */ + mpic = mpic_alloc(np, r.start, + MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, + 16, 64, " OPENPIC "); + BUG_ON(mpic == NULL); + + /* + * 48 Internal Interrupts + */ + mpic_assign_isu(mpic, 0, r.start + 0x10200); + mpic_assign_isu(mpic, 1, r.start + 0x10400); + mpic_assign_isu(mpic, 2, r.start + 0x10600); + + /* + * 16 External interrupts + */ + mpic_assign_isu(mpic, 3, r.start + 0x10000); + + mpic_init(mpic); + +#ifdef CONFIG_PPC_I8259 + /* Initialize the i8259 controller */ + for_each_node_by_type(np, "interrupt-controller") + if (device_is_compatible(np, "chrp,iic")) { + cascade_node = np; + break; + } + + if (cascade_node == NULL) { + printk(KERN_DEBUG "Could not find i8259 PIC\n"); + return; + } + + cascade_irq = irq_of_parse_and_map(cascade_node, 0); + if (cascade_irq == NO_IRQ) { + printk(KERN_ERR "Failed to map cascade interrupt\n"); + return; + } + + DBG("mpc8544ds: cascade mapped to irq %d\n", cascade_irq); + + i8259_init(cascade_node, 0); + of_node_put(cascade_node); + + set_irq_chained_handler(cascade_irq, mpc8544_8259_cascade); +#endif /* CONFIG_PPC_I8259 */ +} + + +/* + * Setup the architecture + */ +static void __init mpc8544_ds_setup_arch(void) +{ + if (ppc_md.progress) + ppc_md.progress("mpc8544_ds_setup_arch()", 0); + + printk("MPC8544 DS board from Freescale Semiconductor\n"); +} + + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init mpc8544_ds_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "MPC8544DS"); +} + +define_machine(mpc8544_ds) { + .name = "MPC8544 DS", + .probe = mpc8544_ds_probe, + .setup_arch = mpc8544_ds_setup_arch, + .init_IRQ = mpc8544_ds_pic_init, + .get_irq = mpic_get_irq, + .restart = mpc85xx_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c index 8ed034aeca5f..5d27621f0927 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c @@ -227,7 +227,7 @@ static void __init mpc85xx_ads_setup_arch(void) if (cpu != 0) { const unsigned int *fp; - fp = get_property(cpu, "clock-frequency", NULL); + fp = of_get_property(cpu, "clock-frequency", NULL); if (fp != 0) loops_per_jiffy = *fp / HZ; else diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c index 4232686be441..7e71636f9098 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c @@ -237,7 +237,7 @@ static void __init mpc85xx_cds_setup_arch(void) if (cpu != 0) { const unsigned int *fp; - fp = get_property(cpu, "clock-frequency", NULL); + fp = of_get_property(cpu, "clock-frequency", NULL); if (fp != 0) loops_per_jiffy = *fp / HZ; else diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index 81144d2ae455..54db41689954 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -80,7 +80,7 @@ static void __init mpc85xx_mds_setup_arch(void) np = of_find_node_by_type(NULL, "cpu"); if (np != NULL) { const unsigned int *fp = - get_property(np, "clock-frequency", NULL); + of_get_property(np, "clock-frequency", NULL); if (fp != NULL) loops_per_jiffy = *fp / HZ; else diff --git a/arch/powerpc/platforms/85xx/pci.c b/arch/powerpc/platforms/85xx/pci.c index 05930eeb6e7f..48f17e23d771 100644 --- a/arch/powerpc/platforms/85xx/pci.c +++ b/arch/powerpc/platforms/85xx/pci.c @@ -51,7 +51,7 @@ int __init add_bridge(struct device_node *dev) has_address = (of_address_to_resource(dev, 0, &rsrc) == 0); /* Get bus range if any */ - bus_range = get_property(dev, "bus-range", &len); + bus_range = of_get_property(dev, "bus-range", &len); if (bus_range == NULL || len < 2 * sizeof(int)) { printk(KERN_WARNING "Can't get bus-range for %s, assume" " bus 0\n", dev->full_name); diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig index 0c70944d0e37..d1bcff500464 100644 --- a/arch/powerpc/platforms/86xx/Kconfig +++ b/arch/powerpc/platforms/86xx/Kconfig @@ -1,8 +1,6 @@ -menu "Platform Support" - depends on PPC_86xx - choice prompt "Machine Type" + depends on PPC_86xx default MPC8641_HPCN config MPC8641_HPCN @@ -14,20 +12,10 @@ config MPC8641_HPCN endchoice - config MPC8641 bool select PPC_INDIRECT_PCI + select PPC_INDIRECT_PCI_BE select PPC_UDBG_16550 + select MPIC default y if MPC8641_HPCN - -config MPIC - bool - default y - -config PPC_INDIRECT_PCI_BE - bool - depends on PPC_86xx - default y - -endmenu diff --git a/arch/powerpc/platforms/86xx/Makefile b/arch/powerpc/platforms/86xx/Makefile index 476a6eeee710..418fd8f4d268 100644 --- a/arch/powerpc/platforms/86xx/Makefile +++ b/arch/powerpc/platforms/86xx/Makefile @@ -4,4 +4,4 @@ obj-$(CONFIG_SMP) += mpc86xx_smp.o obj-$(CONFIG_MPC8641_HPCN) += mpc86xx_hpcn.o -obj-$(CONFIG_PCI) += pci.o mpc86xx_pcie.o +obj-$(CONFIG_PCI) += pci.o diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c index f42f801cf84e..3d3d98f5bd4a 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c +++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c @@ -349,7 +349,7 @@ mpc86xx_hpcn_setup_arch(void) if (np != 0) { const unsigned int *fp; - fp = get_property(np, "clock-frequency", NULL); + fp = of_get_property(np, "clock-frequency", NULL); if (fp != 0) loops_per_jiffy = *fp / HZ; else @@ -384,7 +384,7 @@ mpc86xx_hpcn_show_cpuinfo(struct seq_file *m) root = of_find_node_by_path("/"); if (root) - model = get_property(root, "model", NULL); + model = of_get_property(root, "model", NULL); seq_printf(m, "Machine\t\t: %s\n", model); of_node_put(root); diff --git a/arch/powerpc/platforms/86xx/pci.c b/arch/powerpc/platforms/86xx/pci.c index 481e18ed5be9..8235c562661f 100644 --- a/arch/powerpc/platforms/86xx/pci.c +++ b/arch/powerpc/platforms/86xx/pci.c @@ -22,9 +22,9 @@ #include <asm/atomic.h> #include <asm/io.h> #include <asm/prom.h> -#include <asm/immap_86xx.h> #include <asm/pci-bridge.h> #include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pcie.h> #include "mpc86xx.h" @@ -163,7 +163,7 @@ int __init add_bridge(struct device_node *dev) has_address = (of_address_to_resource(dev, 0, &rsrc) == 0); /* Get bus range if any */ - bus_range = get_property(dev, "bus-range", &len); + bus_range = of_get_property(dev, "bus-range", &len); if (bus_range == NULL || len < 2 * sizeof(int)) printk(KERN_WARNING "Can't get bus-range for %s, assume" " bus 0\n", dev->full_name); diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig index beea6834bb7e..39bb8c5ebe70 100644 --- a/arch/powerpc/platforms/8xx/Kconfig +++ b/arch/powerpc/platforms/8xx/Kconfig @@ -1,6 +1,3 @@ -menu "Platform support" - depends on PPC_8xx - config FADS bool @@ -9,6 +6,7 @@ config CPM1 choice prompt "8xx Machine Type" + depends on PPC_8xx depends on 8xx default MPC885ADS @@ -36,38 +34,36 @@ config MPC885ADS endchoice menu "Freescale Ethernet driver platform-specific options" - depends on (FS_ENET && MPC885ADS) - - config MPC8xx_SECOND_ETH - bool "Second Ethernet channel" - depends on MPC885ADS - default y - help - This enables support for second Ethernet on MPC885ADS and MPC86xADS boards. - The latter will use SCC1, for 885ADS you can select it below. - - choice - prompt "Second Ethernet channel" - depends on MPC8xx_SECOND_ETH - default MPC8xx_SECOND_ETH_FEC2 - - config MPC8xx_SECOND_ETH_FEC2 - bool "FEC2" - depends on MPC885ADS - help - Enable FEC2 to serve as 2-nd Ethernet channel. Note that SMC2 - (often 2-nd UART) will not work if this is enabled. - - config MPC8xx_SECOND_ETH_SCC3 - bool "SCC3" - depends on MPC885ADS - help - Enable SCC3 to serve as 2-nd Ethernet channel. Note that SMC1 - (often 1-nd UART) will not work if this is enabled. - - endchoice + depends on (FS_ENET && MPC885ADS) -endmenu + config MPC8xx_SECOND_ETH + bool "Second Ethernet channel" + depends on MPC885ADS + default y + help + This enables support for second Ethernet on MPC885ADS and MPC86xADS boards. + The latter will use SCC1, for 885ADS you can select it below. + + choice + prompt "Second Ethernet channel" + depends on MPC8xx_SECOND_ETH + default MPC8xx_SECOND_ETH_FEC2 + + config MPC8xx_SECOND_ETH_FEC2 + bool "FEC2" + depends on MPC885ADS + help + Enable FEC2 to serve as 2-nd Ethernet channel. Note that SMC2 + (often 2-nd UART) will not work if this is enabled. + + config MPC8xx_SECOND_ETH_SCC3 + bool "SCC3" + depends on MPC885ADS + help + Enable SCC3 to serve as 2-nd Ethernet channel. Note that SMC1 + (often 1-nd UART) will not work if this is enabled. + + endchoice endmenu @@ -98,7 +94,7 @@ config 8xx_CPU6 require workarounds for Linux (and most other OSes to work). If you get a BUG() very early in boot, this might fix the problem. For more details read the document entitled "MPC860 Family Device Errata - Reference" on Motorola's website. This option also incurs a + Reference" on Freescale's website. This option also incurs a performance hit. If in doubt, say N here. @@ -135,4 +131,3 @@ config UCODE_PATCH depends on !NO_UCODE_PATCH endmenu - diff --git a/arch/powerpc/platforms/8xx/m8xx_setup.c b/arch/powerpc/platforms/8xx/m8xx_setup.c index 9ed7125f0150..0901dbada350 100644 --- a/arch/powerpc/platforms/8xx/m8xx_setup.c +++ b/arch/powerpc/platforms/8xx/m8xx_setup.c @@ -85,17 +85,17 @@ init_internal_rtc(void) static int __init get_freq(char *name, unsigned long *val) { struct device_node *cpu; - unsigned int *fp; + const unsigned int *fp; int found = 0; /* The cpu node should have timebase and clock frequency properties */ cpu = of_find_node_by_type(NULL, "cpu"); if (cpu) { - fp = (unsigned int *)get_property(cpu, name, NULL); + fp = of_get_property(cpu, name, NULL); if (fp) { found = 1; - *val = *fp++; + *val = *fp; } of_node_put(cpu); @@ -262,7 +262,7 @@ void mpc8xx_show_cpuinfo(struct seq_file *m) root = of_find_node_by_path("/"); if (root) - model = get_property(root, "model", NULL); + model = of_get_property(root, "model", NULL); seq_printf(m, "Machine\t\t: %s\n", model); of_node_put(root); diff --git a/arch/powerpc/platforms/8xx/mpc86xads.h b/arch/powerpc/platforms/8xx/mpc86xads.h index b5d19dd0619c..59bad2f9ae51 100644 --- a/arch/powerpc/platforms/8xx/mpc86xads.h +++ b/arch/powerpc/platforms/8xx/mpc86xads.h @@ -37,7 +37,7 @@ #define CPM_MAP_ADDR (get_immrbase() + MPC8xx_CPM_OFFSET) #define CPM_IRQ_OFFSET 16 // for compability with cpm_uart driver -#define PCMCIA_MEM_ADDR (uint)0xff020000) +#define PCMCIA_MEM_ADDR ((uint)0xff020000) #define PCMCIA_MEM_SIZE ((uint)(64 * 1024)) /* Bits of interest in the BCSRs. diff --git a/arch/powerpc/platforms/8xx/mpc86xads_setup.c b/arch/powerpc/platforms/8xx/mpc86xads_setup.c index ef52ce701b0e..a35315af5c53 100644 --- a/arch/powerpc/platforms/8xx/mpc86xads_setup.c +++ b/arch/powerpc/platforms/8xx/mpc86xads_setup.c @@ -247,7 +247,7 @@ void init_smc_ioports(struct fs_uart_platform_info *data) } } -int platform_device_skip(char *model, int id) +int platform_device_skip(const char *model, int id) { return 0; } @@ -260,7 +260,7 @@ static void __init mpc86xads_setup_arch(void) if (cpu != 0) { const unsigned int *fp; - fp = get_property(cpu, "clock-frequency", NULL); + fp = of_get_property(cpu, "clock-frequency", NULL); if (fp != 0) loops_per_jiffy = *fp / HZ; else diff --git a/arch/powerpc/platforms/8xx/mpc885ads.h b/arch/powerpc/platforms/8xx/mpc885ads.h index 30cbebfe84c5..7c31aec284c2 100644 --- a/arch/powerpc/platforms/8xx/mpc885ads.h +++ b/arch/powerpc/platforms/8xx/mpc885ads.h @@ -37,7 +37,7 @@ #define CPM_MAP_ADDR (get_immrbase() + MPC8xx_CPM_OFFSET) #define CPM_IRQ_OFFSET 16 // for compability with cpm_uart driver -#define PCMCIA_MEM_ADDR (uint)0xff020000) +#define PCMCIA_MEM_ADDR ((uint)0xff020000) #define PCMCIA_MEM_SIZE ((uint)(64 * 1024)) /* Bits of interest in the BCSRs. diff --git a/arch/powerpc/platforms/8xx/mpc885ads_setup.c b/arch/powerpc/platforms/8xx/mpc885ads_setup.c index c5fefdf66c0a..a57b57785acd 100644 --- a/arch/powerpc/platforms/8xx/mpc885ads_setup.c +++ b/arch/powerpc/platforms/8xx/mpc885ads_setup.c @@ -322,7 +322,7 @@ void init_smc_ioports(struct fs_uart_platform_info *data) } } -int platform_device_skip(char *model, int id) +int platform_device_skip(const char *model, int id) { #ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3 const char *dev = "FEC"; @@ -346,7 +346,7 @@ static void __init mpc885ads_setup_arch(void) if (cpu != 0) { const unsigned int *fp; - fp = get_property(cpu, "clock-frequency", NULL); + fp = of_get_property(cpu, "clock-frequency", NULL); if (fp != 0) loops_per_jiffy = *fp / HZ; else diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig new file mode 100644 index 000000000000..51e33347c147 --- /dev/null +++ b/arch/powerpc/platforms/Kconfig @@ -0,0 +1,259 @@ +menu "Platform support" + +choice + prompt "Machine type" + depends on PPC64 || CLASSIC32 + default PPC_MULTIPLATFORM + +config PPC_MULTIPLATFORM + bool "Generic desktop/server/laptop" + help + Select this option if configuring for an IBM pSeries or + RS/6000 machine, an Apple machine, or a PReP, CHRP, + Maple or Cell-based machine. + +config EMBEDDED6xx + bool "Embedded 6xx/7xx/7xxx-based board" + depends on PPC32 && (BROKEN||BROKEN_ON_SMP) + +config APUS + bool "Amiga-APUS" + depends on PPC32 && BROKEN + help + Select APUS if configuring for a PowerUP Amiga. + More information is available at: + <http://linux-apus.sourceforge.net/>. +endchoice + +source "arch/powerpc/platforms/pseries/Kconfig" +source "arch/powerpc/platforms/iseries/Kconfig" +source "arch/powerpc/platforms/chrp/Kconfig" +source "arch/powerpc/platforms/52xx/Kconfig" +source "arch/powerpc/platforms/powermac/Kconfig" +source "arch/powerpc/platforms/prep/Kconfig" +source "arch/powerpc/platforms/maple/Kconfig" +source "arch/powerpc/platforms/pasemi/Kconfig" +source "arch/powerpc/platforms/celleb/Kconfig" +source "arch/powerpc/platforms/ps3/Kconfig" +source "arch/powerpc/platforms/cell/Kconfig" +source "arch/powerpc/platforms/8xx/Kconfig" +source "arch/powerpc/platforms/82xx/Kconfig" +source "arch/powerpc/platforms/83xx/Kconfig" +source "arch/powerpc/platforms/85xx/Kconfig" +source "arch/powerpc/platforms/86xx/Kconfig" +source "arch/powerpc/platforms/embedded6xx/Kconfig" +#source "arch/powerpc/platforms/4xx/Kconfig + +config PPC_NATIVE + bool + depends on PPC_MULTIPLATFORM + help + Support for running natively on the hardware, i.e. without + a hypervisor. This option is not user-selectable but should + be selected by all platforms that need it. + +config UDBG_RTAS_CONSOLE + bool "RTAS based debug console" + depends on PPC_RTAS + default n + +config PPC_UDBG_BEAT + bool "BEAT based debug console" + depends on PPC_CELLEB + default n + +config XICS + depends on PPC_PSERIES + bool + default y + +config MPIC + bool + default n + +config MPIC_WEIRD + bool + default n + +config PPC_I8259 + bool + default n + +config U3_DART + bool + depends on PPC_MULTIPLATFORM && PPC64 + default n + +config PPC_RTAS + bool + default n + +config RTAS_ERROR_LOGGING + bool + depends on PPC_RTAS + default n + +config RTAS_PROC + bool "Proc interface to RTAS" + depends on PPC_RTAS + default y + +config RTAS_FLASH + tristate "Firmware flash interface" + depends on PPC64 && RTAS_PROC + +config PPC_PMI + tristate "Support for PMI" + depends PPC_IBM_CELL_BLADE + help + PMI (Platform Management Interrupt) is a way to + communicate with the BMC (Baseboard Mangement Controller). + It is used in some IBM Cell blades. + default m + +config MMIO_NVRAM + bool + default n + +config MPIC_U3_HT_IRQS + bool + depends on PPC_MAPLE + default y + +config IBMVIO + depends on PPC_PSERIES || PPC_ISERIES + bool + default y + +config IBMEBUS + depends on PPC_PSERIES + bool "Support for GX bus based adapters" + help + Bus device driver for GX bus based adapters. + +config PPC_MPC106 + bool + default n + +config PPC_970_NAP + bool + default n + +config PPC_INDIRECT_IO + bool + select GENERIC_IOMAP + default n + +config GENERIC_IOMAP + bool + default n + +source "drivers/cpufreq/Kconfig" + +menu "CPU Frequency drivers" + depends on CPU_FREQ + +config CPU_FREQ_PMAC + bool "Support for Apple PowerBooks" + depends on ADB_PMU && PPC32 + select CPU_FREQ_TABLE + help + This adds support for frequency switching on Apple PowerBooks, + this currently includes some models of iBook & Titanium + PowerBook. + +config CPU_FREQ_PMAC64 + bool "Support for some Apple G5s" + depends on PPC_PMAC && PPC64 + select CPU_FREQ_TABLE + help + This adds support for frequency switching on Apple iMac G5, + and some of the more recent desktop G5 machines as well. + +config PPC_PASEMI_CPUFREQ + bool "Support for PA Semi PWRficient" + depends on PPC_PASEMI + default y + select CPU_FREQ_TABLE + help + This adds the support for frequency switching on PA Semi + PWRficient processors. + +endmenu + +config PPC601_SYNC_FIX + bool "Workarounds for PPC601 bugs" + depends on 6xx && (PPC_PREP || PPC_PMAC) + help + Some versions of the PPC601 (the first PowerPC chip) have bugs which + mean that extra synchronization instructions are required near + certain instructions, typically those that make major changes to the + CPU state. These extra instructions reduce performance slightly. + If you say N here, these extra instructions will not be included, + resulting in a kernel which will run faster but may not run at all + on some systems with the PPC601 chip. + + If in doubt, say Y here. + +config TAU + bool "On-chip CPU temperature sensor support" + depends on CLASSIC32 + help + G3 and G4 processors have an on-chip temperature sensor called the + 'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die + temperature within 2-4 degrees Celsius. This option shows the current + on-die temperature in /proc/cpuinfo if the cpu supports it. + + Unfortunately, on some chip revisions, this sensor is very inaccurate + and in many cases, does not work at all, so don't assume the cpu + temp is actually what /proc/cpuinfo says it is. + +config TAU_INT + bool "Interrupt driven TAU driver (DANGEROUS)" + depends on TAU + ---help--- + The TAU supports an interrupt driven mode which causes an interrupt + whenever the temperature goes out of range. This is the fastest way + to get notified the temp has exceeded a range. With this option off, + a timer is used to re-check the temperature periodically. + + However, on some cpus it appears that the TAU interrupt hardware + is buggy and can cause a situation which would lead unexplained hard + lockups. + + Unless you are extending the TAU driver, or enjoy kernel/hardware + debugging, leave this option off. + +config TAU_AVERAGE + bool "Average high and low temp" + depends on TAU + ---help--- + The TAU hardware can compare the temperature to an upper and lower + bound. The default behavior is to show both the upper and lower + bound in /proc/cpuinfo. If the range is large, the temperature is + either changing a lot, or the TAU hardware is broken (likely on some + G4's). If the range is small (around 4 degrees), the temperature is + relatively stable. If you say Y here, a single temperature value, + halfway between the upper and lower bounds, will be reported in + /proc/cpuinfo. + + If in doubt, say N here. + +config QUICC_ENGINE + bool + help + The QUICC Engine (QE) is a new generation of communications + coprocessors on Freescale embedded CPUs (akin to CPM in older chips). + Selecting this option means that you wish to build a kernel + for a machine with a QE coprocessor. + +config CPM2 + bool + default n + help + The CPM2 (Communications Processor Module) is a coprocessor on + embedded CPUs made by Freescale. Selecting this option means that + you wish to build a kernel for a machine with a CPM2 coprocessor + on it (826x, 827x, 8560). + +endmenu diff --git a/arch/powerpc/platforms/cell/Kconfig b/arch/powerpc/platforms/cell/Kconfig index 06a85b704331..82551770917c 100644 --- a/arch/powerpc/platforms/cell/Kconfig +++ b/arch/powerpc/platforms/cell/Kconfig @@ -1,3 +1,26 @@ +config PPC_CELL + bool + default n + +config PPC_CELL_NATIVE + bool + select PPC_CELL + select PPC_DCR_MMIO + select PPC_OF_PLATFORM_PCI + select PPC_INDIRECT_IO + select PPC_NATIVE + select MPIC + default n + +config PPC_IBM_CELL_BLADE + bool "IBM Cell Blade" + depends on PPC_MULTIPLATFORM && PPC64 + select PPC_CELL_NATIVE + select PPC_RTAS + select MMIO_NVRAM + select PPC_UDBG_16550 + select UDBG_RTAS_CONSOLE + menu "Cell Broadband Engine options" depends on PPC_CELL @@ -18,6 +41,7 @@ config SPU_BASE config CBE_RAS bool "RAS features for bare metal Cell BE" + depends on PPC_CELL_NATIVE default y config CBE_THERM diff --git a/arch/powerpc/platforms/cell/cbe_cpufreq.c b/arch/powerpc/platforms/cell/cbe_cpufreq.c index a3850fd1e94c..f9ac3fe3be97 100644 --- a/arch/powerpc/platforms/cell/cbe_cpufreq.c +++ b/arch/powerpc/platforms/cell/cbe_cpufreq.c @@ -25,9 +25,12 @@ #include <asm/hw_irq.h> #include <asm/io.h> +#include <asm/machdep.h> #include <asm/processor.h> #include <asm/prom.h> #include <asm/time.h> +#include <asm/pmi.h> +#include <asm/of_platform.h> #include "cbe_regs.h" @@ -68,6 +71,38 @@ static u64 MIC_Slow_Next_Timer_table[] = { * hardware specific functions */ +static struct of_device *pmi_dev; + +static int set_pmode_pmi(int cpu, unsigned int pmode) +{ + int ret; + pmi_message_t pmi_msg; +#ifdef DEBUG + u64 time; +#endif + + pmi_msg.type = PMI_TYPE_FREQ_CHANGE; + pmi_msg.data1 = cbe_cpu_to_node(cpu); + pmi_msg.data2 = pmode; + +#ifdef DEBUG + time = (u64) get_cycles(); +#endif + + pmi_send_message(pmi_dev, pmi_msg); + ret = pmi_msg.data2; + + pr_debug("PMI returned slow mode %d\n", ret); + +#ifdef DEBUG + time = (u64) get_cycles() - time; /* actual cycles (not cpu cycles!) */ + time = 1000000000 * time / CLOCK_TICK_RATE; /* time in ns (10^-9) */ + pr_debug("had to wait %lu ns for a transition\n", time); +#endif + return ret; +} + + static int get_pmode(int cpu) { int ret; @@ -79,7 +114,7 @@ static int get_pmode(int cpu) return ret; } -static int set_pmode(int cpu, unsigned int pmode) +static int set_pmode_reg(int cpu, unsigned int pmode) { struct cbe_pmd_regs __iomem *pmd_regs; struct cbe_mic_tm_regs __iomem *mic_tm_regs; @@ -120,37 +155,71 @@ static int set_pmode(int cpu, unsigned int pmode) return 0; } +static int set_pmode(int cpu, unsigned int slow_mode) { + if (pmi_dev) + return set_pmode_pmi(cpu, slow_mode); + else + return set_pmode_reg(cpu, slow_mode); +} + +static void cbe_cpufreq_handle_pmi(struct of_device *dev, pmi_message_t pmi_msg) +{ + struct cpufreq_policy policy; + u8 cpu; + u8 cbe_pmode_new; + + BUG_ON(pmi_msg.type != PMI_TYPE_FREQ_CHANGE); + + cpu = cbe_node_to_cpu(pmi_msg.data1); + cbe_pmode_new = pmi_msg.data2; + + cpufreq_get_policy(&policy, cpu); + + policy.max = min(policy.max, cbe_freqs[cbe_pmode_new].frequency); + policy.min = min(policy.min, policy.max); + + pr_debug("cbe_handle_pmi: new policy.min=%d policy.max=%d\n", policy.min, policy.max); + cpufreq_set_policy(&policy); +} + +static struct pmi_handler cbe_pmi_handler = { + .type = PMI_TYPE_FREQ_CHANGE, + .handle_pmi_message = cbe_cpufreq_handle_pmi, +}; + + /* * cpufreq functions */ -static int cbe_cpufreq_cpu_init (struct cpufreq_policy *policy) +static int cbe_cpufreq_cpu_init(struct cpufreq_policy *policy) { - u32 *max_freq; + const u32 *max_freqp; + u32 max_freq; int i, cur_pmode; struct device_node *cpu; cpu = of_get_cpu_node(policy->cpu, NULL); - if(!cpu) + if (!cpu) return -ENODEV; pr_debug("init cpufreq on CPU %d\n", policy->cpu); - max_freq = (u32*) get_property(cpu, "clock-frequency", NULL); + max_freqp = of_get_property(cpu, "clock-frequency", NULL); - if(!max_freq) + if (!max_freqp) return -EINVAL; - // we need the freq in kHz - *max_freq /= 1000; + /* we need the freq in kHz */ + max_freq = *max_freqp / 1000; - pr_debug("max clock-frequency is at %u kHz\n", *max_freq); + pr_debug("max clock-frequency is at %u kHz\n", max_freq); pr_debug("initializing frequency table\n"); - // initialize frequency table + /* initialize frequency table */ for (i=0; cbe_freqs[i].frequency!=CPUFREQ_TABLE_END; i++) { - cbe_freqs[i].frequency = *max_freq / cbe_freqs[i].index; + cbe_freqs[i].frequency = max_freq / cbe_freqs[i].index; pr_debug("%d: %d\n", i, cbe_freqs[i].frequency); } @@ -167,10 +236,10 @@ static int cbe_cpufreq_cpu_init (struct cpufreq_policy *policy) policy->cpus = cpu_sibling_map[policy->cpu]; #endif - cpufreq_frequency_table_get_attr (cbe_freqs, policy->cpu); + cpufreq_frequency_table_get_attr(cbe_freqs, policy->cpu); /* this ensures that policy->cpuinfo_min and policy->cpuinfo_max are set correctly */ - return cpufreq_frequency_table_cpuinfo (policy, cbe_freqs); + return cpufreq_frequency_table_cpuinfo(policy, cbe_freqs); } static int cbe_cpufreq_cpu_exit(struct cpufreq_policy *policy) @@ -202,7 +271,7 @@ static int cbe_cpufreq_target(struct cpufreq_policy *policy, unsigned int target freqs.new = cbe_freqs[cbe_pmode_new].frequency; freqs.cpu = policy->cpu; - mutex_lock (&cbe_switch_mutex); + mutex_lock(&cbe_switch_mutex); cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); pr_debug("setting frequency for cpu %d to %d kHz, 1/%d of max frequency\n", @@ -233,11 +302,26 @@ static struct cpufreq_driver cbe_cpufreq_driver = { static int __init cbe_cpufreq_init(void) { + struct device_node *np; + + if (!machine_is(cell)) + return -ENODEV; + + np = of_find_node_by_type(NULL, "ibm,pmi"); + + pmi_dev = of_find_device_by_node(np); + + if (pmi_dev) + pmi_register_handler(pmi_dev, &cbe_pmi_handler); + return cpufreq_register_driver(&cbe_cpufreq_driver); } static void __exit cbe_cpufreq_exit(void) { + if (pmi_dev) + pmi_unregister_handler(pmi_dev, &cbe_pmi_handler); + cpufreq_unregister_driver(&cbe_cpufreq_driver); } diff --git a/arch/powerpc/platforms/cell/cbe_regs.c b/arch/powerpc/platforms/cell/cbe_regs.c index 9a0ee62691d5..12c9674b4b1f 100644 --- a/arch/powerpc/platforms/cell/cbe_regs.c +++ b/arch/powerpc/platforms/cell/cbe_regs.c @@ -14,6 +14,8 @@ #include <asm/pgtable.h> #include <asm/prom.h> #include <asm/ptrace.h> +#include <asm/of_device.h> +#include <asm/of_platform.h> #include "cbe_regs.h" @@ -27,6 +29,7 @@ static struct cbe_regs_map { struct device_node *cpu_node; + struct device_node *be_node; struct cbe_pmd_regs __iomem *pmd_regs; struct cbe_iic_regs __iomem *iic_regs; struct cbe_mic_tm_regs __iomem *mic_tm_regs; @@ -37,30 +40,43 @@ static int cbe_regs_map_count; static struct cbe_thread_map { struct device_node *cpu_node; + struct device_node *be_node; struct cbe_regs_map *regs; + unsigned int thread_id; + unsigned int cbe_id; } cbe_thread_map[NR_CPUS]; +static cpumask_t cbe_local_mask[MAX_CBE] = { [0 ... MAX_CBE-1] = CPU_MASK_NONE }; +static cpumask_t cbe_first_online_cpu = CPU_MASK_NONE; + static struct cbe_regs_map *cbe_find_map(struct device_node *np) { int i; struct device_node *tmp_np; - if (strcasecmp(np->type, "spe") == 0) { - if (np->data == NULL) { - /* walk up path until cpu node was found */ - tmp_np = np->parent; - while (tmp_np != NULL && strcasecmp(tmp_np->type, "cpu") != 0) - tmp_np = tmp_np->parent; + if (strcasecmp(np->type, "spe")) { + for (i = 0; i < cbe_regs_map_count; i++) + if (cbe_regs_maps[i].cpu_node == np || + cbe_regs_maps[i].be_node == np) + return &cbe_regs_maps[i]; + return NULL; + } - np->data = cbe_find_map(tmp_np); - } + if (np->data) return np->data; - } - for (i = 0; i < cbe_regs_map_count; i++) - if (cbe_regs_maps[i].cpu_node == np) - return &cbe_regs_maps[i]; - return NULL; + /* walk up path until cpu or be node was found */ + tmp_np = np; + do { + tmp_np = tmp_np->parent; + /* on a correct devicetree we wont get up to root */ + BUG_ON(!tmp_np); + } while (strcasecmp(tmp_np->type, "cpu") && + strcasecmp(tmp_np->type, "be")); + + np->data = cbe_find_map(tmp_np); + + return np->data; } struct cbe_pmd_regs __iomem *cbe_get_pmd_regs(struct device_node *np) @@ -130,38 +146,105 @@ struct cbe_mic_tm_regs __iomem *cbe_get_cpu_mic_tm_regs(int cpu) } EXPORT_SYMBOL_GPL(cbe_get_cpu_mic_tm_regs); -/* FIXME - * This is little more than a stub at the moment. It should be - * fleshed out so that it works for both SMT and non-SMT, no - * matter if the passed cpu is odd or even. - * For SMT enabled, returns 0 for even-numbered cpu; otherwise 1. - * For SMT disabled, returns 0 for all cpus. - */ u32 cbe_get_hw_thread_id(int cpu) { - return (cpu & 1); + return cbe_thread_map[cpu].thread_id; } EXPORT_SYMBOL_GPL(cbe_get_hw_thread_id); -void __init cbe_regs_init(void) +u32 cbe_cpu_to_node(int cpu) { - int i; - struct device_node *cpu; + return cbe_thread_map[cpu].cbe_id; +} +EXPORT_SYMBOL_GPL(cbe_cpu_to_node); - /* Build local fast map of CPUs */ - for_each_possible_cpu(i) - cbe_thread_map[i].cpu_node = of_get_cpu_node(i, NULL); +u32 cbe_node_to_cpu(int node) +{ + return find_first_bit( (unsigned long *) &cbe_local_mask[node], sizeof(cpumask_t)); +} +EXPORT_SYMBOL_GPL(cbe_node_to_cpu); - /* Find maps for each device tree CPU */ - for_each_node_by_type(cpu, "cpu") { - struct cbe_regs_map *map = &cbe_regs_maps[cbe_regs_map_count++]; +static struct device_node *cbe_get_be_node(int cpu_id) +{ + struct device_node *np; + + for_each_node_by_type (np, "be") { + int len,i; + const phandle *cpu_handle; + + cpu_handle = of_get_property(np, "cpus", &len); + + for (i=0; i<len; i++) + if (of_find_node_by_phandle(cpu_handle[i]) == of_get_cpu_node(cpu_id, NULL)) + return np; + } + + return NULL; +} + +void __init cbe_fill_regs_map(struct cbe_regs_map *map) +{ + if(map->be_node) { + struct device_node *be, *np; + + be = map->be_node; + + for_each_node_by_type(np, "pervasive") + if (of_get_parent(np) == be) + map->pmd_regs = of_iomap(np, 0); + + for_each_node_by_type(np, "CBEA-Internal-Interrupt-Controller") + if (of_get_parent(np) == be) + map->iic_regs = of_iomap(np, 2); + for_each_node_by_type(np, "mic-tm") + if (of_get_parent(np) == be) + map->mic_tm_regs = of_iomap(np, 0); + } else { + struct device_node *cpu; /* That hack must die die die ! */ const struct address_prop { unsigned long address; unsigned int len; } __attribute__((packed)) *prop; + cpu = map->cpu_node; + + prop = of_get_property(cpu, "pervasive", NULL); + if (prop != NULL) + map->pmd_regs = ioremap(prop->address, prop->len); + + prop = of_get_property(cpu, "iic", NULL); + if (prop != NULL) + map->iic_regs = ioremap(prop->address, prop->len); + + prop = of_get_property(cpu, "mic-tm", NULL); + if (prop != NULL) + map->mic_tm_regs = ioremap(prop->address, prop->len); + } +} + + +void __init cbe_regs_init(void) +{ + int i; + unsigned int thread_id; + struct device_node *cpu; + + /* Build local fast map of CPUs */ + for_each_possible_cpu(i) { + cbe_thread_map[i].cpu_node = of_get_cpu_node(i, &thread_id); + cbe_thread_map[i].be_node = cbe_get_be_node(i); + cbe_thread_map[i].thread_id = thread_id; + } + + /* Find maps for each device tree CPU */ + for_each_node_by_type(cpu, "cpu") { + struct cbe_regs_map *map; + unsigned int cbe_id; + + cbe_id = cbe_regs_map_count++; + map = &cbe_regs_maps[cbe_id]; if (cbe_regs_map_count > MAX_CBE) { printk(KERN_ERR "cbe_regs: More BE chips than supported" @@ -170,22 +253,21 @@ void __init cbe_regs_init(void) return; } map->cpu_node = cpu; - for_each_possible_cpu(i) - if (cbe_thread_map[i].cpu_node == cpu) - cbe_thread_map[i].regs = map; - prop = get_property(cpu, "pervasive", NULL); - if (prop != NULL) - map->pmd_regs = ioremap(prop->address, prop->len); + for_each_possible_cpu(i) { + struct cbe_thread_map *thread = &cbe_thread_map[i]; - prop = get_property(cpu, "iic", NULL); - if (prop != NULL) - map->iic_regs = ioremap(prop->address, prop->len); + if (thread->cpu_node == cpu) { + thread->regs = map; + thread->cbe_id = cbe_id; + map->be_node = thread->be_node; + cpu_set(i, cbe_local_mask[cbe_id]); + if(thread->thread_id == 0) + cpu_set(i, cbe_first_online_cpu); + } + } - prop = (struct address_prop *)get_property(cpu, "mic-tm", - NULL); - if (prop != NULL) - map->mic_tm_regs = ioremap(prop->address, prop->len); + cbe_fill_regs_map(map); } } diff --git a/arch/powerpc/platforms/cell/cbe_regs.h b/arch/powerpc/platforms/cell/cbe_regs.h index 440a7ecc66ea..17d597144877 100644 --- a/arch/powerpc/platforms/cell/cbe_regs.h +++ b/arch/powerpc/platforms/cell/cbe_regs.h @@ -255,6 +255,11 @@ struct cbe_mic_tm_regs { extern struct cbe_mic_tm_regs __iomem *cbe_get_mic_tm_regs(struct device_node *np); extern struct cbe_mic_tm_regs __iomem *cbe_get_cpu_mic_tm_regs(int cpu); +/* some utility functions to deal with SMT */ +extern u32 cbe_get_hw_thread_id(int cpu); +extern u32 cbe_cpu_to_node(int cpu); +extern u32 cbe_node_to_cpu(int node); + /* Init this module early */ extern void cbe_regs_init(void); diff --git a/arch/powerpc/platforms/cell/cbe_thermal.c b/arch/powerpc/platforms/cell/cbe_thermal.c index 70e0d968d30f..f370f0fa6f4c 100644 --- a/arch/powerpc/platforms/cell/cbe_thermal.c +++ b/arch/powerpc/platforms/cell/cbe_thermal.c @@ -1,6 +1,31 @@ /* * thermal support for the cell processor * + * This module adds some sysfs attributes to cpu and spu nodes. + * Base for measurements are the digital thermal sensors (DTS) + * located on the chip. + * The accuracy is 2 degrees, starting from 65 up to 125 degrees celsius + * The attributes can be found under + * /sys/devices/system/cpu/cpuX/thermal + * /sys/devices/system/spu/spuX/thermal + * + * The following attributes are added for each node: + * temperature: + * contains the current temperature measured by the DTS + * throttle_begin: + * throttling begins when temperature is greater or equal to + * throttle_begin. Setting this value to 125 prevents throttling. + * throttle_end: + * throttling is being ceased, if the temperature is lower than + * throttle_end. Due to a delay between applying throttling and + * a reduced temperature this value should be less than throttle_begin. + * A value equal to throttle_begin provides only a very little hysteresis. + * throttle_full_stop: + * If the temperatrue is greater or equal to throttle_full_stop, + * full throttling is applied to the cpu or spu. This value should be + * greater than throttle_begin and throttle_end. Setting this value to + * 65 prevents the unit from running code at all. + * * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 * * Author: Christian Krafft <krafft@de.ibm.com> @@ -31,6 +56,26 @@ #include "cbe_regs.h" #include "spu_priv1_mmio.h" +#define TEMP_MIN 65 +#define TEMP_MAX 125 + +#define SYSDEV_PREFIX_ATTR(_prefix,_name,_mode) \ +struct sysdev_attribute attr_ ## _prefix ## _ ## _name = { \ + .attr = { .name = __stringify(_name), .mode = _mode }, \ + .show = _prefix ## _show_ ## _name, \ + .store = _prefix ## _store_ ## _name, \ +}; + +static inline u8 reg_to_temp(u8 reg_value) +{ + return ((reg_value & 0x3f) << 1) + TEMP_MIN; +} + +static inline u8 temp_to_reg(u8 temp) +{ + return ((temp - TEMP_MIN) >> 1) & 0x3f; +} + static struct cbe_pmd_regs __iomem *get_pmd_regs(struct sys_device *sysdev) { struct spu *spu; @@ -43,14 +88,14 @@ static struct cbe_pmd_regs __iomem *get_pmd_regs(struct sys_device *sysdev) /* returns the value for a given spu in a given register */ static u8 spu_read_register_value(struct sys_device *sysdev, union spe_reg __iomem *reg) { - unsigned int *id; + const unsigned int *id; union spe_reg value; struct spu *spu; /* getting the id from the reg attribute will not work on future device-tree layouts * in future we should store the id to the spu struct and use it here */ spu = container_of(sysdev, struct spu, sysdev); - id = (unsigned int *)get_property(spu_devnode(spu), "reg", NULL); + id = of_get_property(spu_devnode(spu), "reg", NULL); value.val = in_be64(®->val); return value.spe[*id]; @@ -58,20 +103,81 @@ static u8 spu_read_register_value(struct sys_device *sysdev, union spe_reg __iom static ssize_t spu_show_temp(struct sys_device *sysdev, char *buf) { - int value; + u8 value; struct cbe_pmd_regs __iomem *pmd_regs; pmd_regs = get_pmd_regs(sysdev); value = spu_read_register_value(sysdev, &pmd_regs->ts_ctsr1); - /* clear all other bits */ + + return sprintf(buf, "%d\n", reg_to_temp(value)); +} + +static ssize_t show_throttle(struct cbe_pmd_regs __iomem *pmd_regs, char *buf, int pos) +{ + u64 value; + + value = in_be64(&pmd_regs->tm_tpr.val); + /* access the corresponding byte */ + value >>= pos; value &= 0x3F; - /* temp is stored in steps of 2 degrees */ - value *= 2; - /* base temp is 65 degrees */ - value += 65; - return sprintf(buf, "%d\n", (int) value); + return sprintf(buf, "%d\n", reg_to_temp(value)); +} + +static ssize_t store_throttle(struct cbe_pmd_regs __iomem *pmd_regs, const char *buf, size_t size, int pos) +{ + u64 reg_value; + int temp; + u64 new_value; + int ret; + + ret = sscanf(buf, "%u", &temp); + + if (ret != 1 || temp < TEMP_MIN || temp > TEMP_MAX) + return -EINVAL; + + new_value = temp_to_reg(temp); + + reg_value = in_be64(&pmd_regs->tm_tpr.val); + + /* zero out bits for new value */ + reg_value &= ~(0xffull << pos); + /* set bits to new value */ + reg_value |= new_value << pos; + + out_be64(&pmd_regs->tm_tpr.val, reg_value); + return size; +} + +static ssize_t spu_show_throttle_end(struct sys_device *sysdev, char *buf) +{ + return show_throttle(get_pmd_regs(sysdev), buf, 0); +} + +static ssize_t spu_show_throttle_begin(struct sys_device *sysdev, char *buf) +{ + return show_throttle(get_pmd_regs(sysdev), buf, 8); +} + +static ssize_t spu_show_throttle_full_stop(struct sys_device *sysdev, char *buf) +{ + return show_throttle(get_pmd_regs(sysdev), buf, 16); +} + +static ssize_t spu_store_throttle_end(struct sys_device *sysdev, const char *buf, size_t size) +{ + return store_throttle(get_pmd_regs(sysdev), buf, size, 0); +} + +static ssize_t spu_store_throttle_begin(struct sys_device *sysdev, const char *buf, size_t size) +{ + return store_throttle(get_pmd_regs(sysdev), buf, size, 8); +} + +static ssize_t spu_store_throttle_full_stop(struct sys_device *sysdev, const char *buf, size_t size) +{ + return store_throttle(get_pmd_regs(sysdev), buf, size, 16); } static ssize_t ppe_show_temp(struct sys_device *sysdev, char *buf, int pos) @@ -82,16 +188,9 @@ static ssize_t ppe_show_temp(struct sys_device *sysdev, char *buf, int pos) pmd_regs = cbe_get_cpu_pmd_regs(sysdev->id); value = in_be64(&pmd_regs->ts_ctsr2); - /* access the corresponding byte */ - value >>= pos; - /* clear all other bits */ - value &= 0x3F; - /* temp is stored in steps of 2 degrees */ - value *= 2; - /* base temp is 65 degrees */ - value += 65; + value = (value >> pos) & 0x3f; - return sprintf(buf, "%d\n", (int) value); + return sprintf(buf, "%d\n", reg_to_temp(value)); } @@ -108,13 +207,52 @@ static ssize_t ppe_show_temp1(struct sys_device *sysdev, char *buf) return ppe_show_temp(sysdev, buf, 0); } +static ssize_t ppe_show_throttle_end(struct sys_device *sysdev, char *buf) +{ + return show_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, 32); +} + +static ssize_t ppe_show_throttle_begin(struct sys_device *sysdev, char *buf) +{ + return show_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, 40); +} + +static ssize_t ppe_show_throttle_full_stop(struct sys_device *sysdev, char *buf) +{ + return show_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, 48); +} + +static ssize_t ppe_store_throttle_end(struct sys_device *sysdev, const char *buf, size_t size) +{ + return store_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, size, 32); +} + +static ssize_t ppe_store_throttle_begin(struct sys_device *sysdev, const char *buf, size_t size) +{ + return store_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, size, 40); +} + +static ssize_t ppe_store_throttle_full_stop(struct sys_device *sysdev, const char *buf, size_t size) +{ + return store_throttle(cbe_get_cpu_pmd_regs(sysdev->id), buf, size, 48); +} + + static struct sysdev_attribute attr_spu_temperature = { .attr = {.name = "temperature", .mode = 0400 }, .show = spu_show_temp, }; +static SYSDEV_PREFIX_ATTR(spu, throttle_end, 0600); +static SYSDEV_PREFIX_ATTR(spu, throttle_begin, 0600); +static SYSDEV_PREFIX_ATTR(spu, throttle_full_stop, 0600); + + static struct attribute *spu_attributes[] = { &attr_spu_temperature.attr, + &attr_spu_throttle_end.attr, + &attr_spu_throttle_begin.attr, + &attr_spu_throttle_full_stop.attr, NULL, }; @@ -133,9 +271,16 @@ static struct sysdev_attribute attr_ppe_temperature1 = { .show = ppe_show_temp1, }; +static SYSDEV_PREFIX_ATTR(ppe, throttle_end, 0600); +static SYSDEV_PREFIX_ATTR(ppe, throttle_begin, 0600); +static SYSDEV_PREFIX_ATTR(ppe, throttle_full_stop, 0600); + static struct attribute *ppe_attributes[] = { &attr_ppe_temperature0.attr, &attr_ppe_temperature1.attr, + &attr_ppe_throttle_end.attr, + &attr_ppe_throttle_begin.attr, + &attr_ppe_throttle_full_stop.attr, NULL, }; diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c index 6666d037eb44..4fc4e92775d0 100644 --- a/arch/powerpc/platforms/cell/interrupt.c +++ b/arch/powerpc/platforms/cell/interrupt.c @@ -261,7 +261,7 @@ static int iic_host_xlate(struct irq_host *h, struct device_node *ct, return -ENODEV; if (intsize != 1) return -ENODEV; - val = get_property(ct, "#interrupt-cells", NULL); + val = of_get_property(ct, "#interrupt-cells", NULL); if (val == NULL || *val != 1) return -ENODEV; @@ -327,7 +327,7 @@ static int __init setup_iic(void) if (!device_is_compatible(dn, "IBM,CBEA-Internal-Interrupt-Controller")) continue; - np = get_property(dn, "ibm,interrupt-server-ranges", NULL); + np = of_get_property(dn, "ibm,interrupt-server-ranges", NULL); if (np == NULL) { printk(KERN_WARNING "IIC: CPU association not found\n"); of_node_put(dn); diff --git a/arch/powerpc/platforms/cell/io-workarounds.c b/arch/powerpc/platforms/cell/io-workarounds.c index 7c73128305ec..d68d920eb2c4 100644 --- a/arch/powerpc/platforms/cell/io-workarounds.c +++ b/arch/powerpc/platforms/cell/io-workarounds.c @@ -318,7 +318,7 @@ static int __init spider_pci_workaround_init(void) */ list_for_each_entry(phb, &hose_list, list_node) { struct device_node *np = phb->arch_data; - const char *model = get_property(np, "model", NULL); + const char *model = of_get_property(np, "model", NULL); /* If no model property or name isn't exactly "pci", skip */ if (model == NULL || strcmp(np->name, "pci")) diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c index 67d617b60a23..760caa76841a 100644 --- a/arch/powerpc/platforms/cell/iommu.c +++ b/arch/powerpc/platforms/cell/iommu.c @@ -291,9 +291,9 @@ static int cell_iommu_find_ioc(int nid, unsigned long *base) const unsigned int *nidp; const unsigned long *tmp; - nidp = get_property(np, "node-id", NULL); + nidp = of_get_property(np, "node-id", NULL); if (nidp && *nidp == nid) { - tmp = get_property(np, "ioc-translation", NULL); + tmp = of_get_property(np, "ioc-translation", NULL); if (tmp) { *base = *tmp; of_node_put(np); @@ -430,7 +430,7 @@ cell_iommu_setup_window(struct cbe_iommu *iommu, struct device_node *np, struct iommu_window *window; const unsigned int *ioid; - ioid = get_property(np, "ioid", NULL); + ioid = of_get_property(np, "ioid", NULL); if (ioid == NULL) printk(KERN_WARNING "iommu: missing ioid for %s using 0\n", np->full_name); @@ -496,7 +496,7 @@ static void cell_dma_dev_setup(struct device *dev) struct dev_archdata *archdata = &dev->archdata; /* If we run without iommu, no need to do anything */ - if (pci_dma_ops == &dma_direct_ops) + if (get_pci_dma_ops() == &dma_direct_ops) return; /* Current implementation uses the first window available in that @@ -530,7 +530,7 @@ static int cell_of_bus_notify(struct notifier_block *nb, unsigned long action, return 0; /* We use the PCI DMA ops */ - dev->archdata.dma_ops = pci_dma_ops; + dev->archdata.dma_ops = get_pci_dma_ops(); cell_dma_dev_setup(dev); @@ -549,7 +549,7 @@ static int __init cell_iommu_get_window(struct device_node *np, unsigned long index; /* Use ibm,dma-window if available, else, hard code ! */ - dma_window = get_property(np, "ibm,dma-window", NULL); + dma_window = of_get_property(np, "ibm,dma-window", NULL); if (dma_window == NULL) { *base = 0; *size = 0x80000000u; @@ -646,7 +646,7 @@ static int __init cell_iommu_init_disabled(void) unsigned long base = 0, size; /* When no iommu is present, we use direct DMA ops */ - pci_dma_ops = &dma_direct_ops; + set_pci_dma_ops(&dma_direct_ops); /* First make sure all IOC translation is turned off */ cell_disable_iommus(); @@ -734,7 +734,7 @@ static int __init cell_iommu_init(void) } /* Setup default PCI iommu ops */ - pci_dma_ops = &dma_iommu_ops; + set_pci_dma_ops(&dma_iommu_ops); bail: /* Register callbacks on OF platform device addition/removal diff --git a/arch/powerpc/platforms/cell/ras.c b/arch/powerpc/platforms/cell/ras.c index 0984c7071695..3961a085b432 100644 --- a/arch/powerpc/platforms/cell/ras.c +++ b/arch/powerpc/platforms/cell/ras.c @@ -3,11 +3,13 @@ #include <linux/types.h> #include <linux/kernel.h> #include <linux/smp.h> +#include <linux/reboot.h> #include <asm/reg.h> #include <asm/io.h> #include <asm/prom.h> #include <asm/machdep.h> +#include <asm/rtas.h> #include "ras.h" #include "cbe_regs.h" @@ -82,6 +84,164 @@ static int cbe_machine_check_handler(struct pt_regs *regs) return 0; } +struct ptcal_area { + struct list_head list; + int nid; + int order; + struct page *pages; +}; + +static LIST_HEAD(ptcal_list); + +static int ptcal_start_tok, ptcal_stop_tok; + +static int __init cbe_ptcal_enable_on_node(int nid, int order) +{ + struct ptcal_area *area; + int ret = -ENOMEM; + unsigned long addr; + +#ifdef CONFIG_CRASH_DUMP + rtas_call(ptcal_stop_tok, 1, 1, NULL, nid); +#endif + + area = kmalloc(sizeof(*area), GFP_KERNEL); + if (!area) + goto out_err; + + area->nid = nid; + area->order = order; + area->pages = alloc_pages_node(area->nid, GFP_KERNEL, area->order); + + if (!area->pages) + goto out_free_area; + + addr = __pa(page_address(area->pages)); + + ret = -EIO; + if (rtas_call(ptcal_start_tok, 3, 1, NULL, area->nid, + (unsigned int)(addr >> 32), + (unsigned int)(addr & 0xffffffff))) { + printk(KERN_ERR "%s: error enabling PTCAL on node %d!\n", + __FUNCTION__, nid); + goto out_free_pages; + } + + list_add(&area->list, &ptcal_list); + + return 0; + +out_free_pages: + __free_pages(area->pages, area->order); +out_free_area: + kfree(area); +out_err: + return ret; +} + +static int __init cbe_ptcal_enable(void) +{ + const u32 *size; + struct device_node *np; + int order, found_mic = 0; + + np = of_find_node_by_path("/rtas"); + if (!np) + return -ENODEV; + + size = of_get_property(np, "ibm,cbe-ptcal-size", NULL); + if (!size) + return -ENODEV; + + pr_debug("%s: enabling PTCAL, size = 0x%x\n", __FUNCTION__, *size); + order = get_order(*size); + of_node_put(np); + + /* support for malta device trees, with be@/mic@ nodes */ + for_each_node_by_type(np, "mic-tm") { + cbe_ptcal_enable_on_node(of_node_to_nid(np), order); + found_mic = 1; + } + + if (found_mic) + return 0; + + /* support for older device tree - use cpu nodes */ + for_each_node_by_type(np, "cpu") { + const u32 *nid = of_get_property(np, "node-id", NULL); + if (!nid) { + printk(KERN_ERR "%s: node %s is missing node-id?\n", + __FUNCTION__, np->full_name); + continue; + } + cbe_ptcal_enable_on_node(*nid, order); + found_mic = 1; + } + + return found_mic ? 0 : -ENODEV; +} + +static int cbe_ptcal_disable(void) +{ + struct ptcal_area *area, *tmp; + int ret = 0; + + pr_debug("%s: disabling PTCAL\n", __FUNCTION__); + + list_for_each_entry_safe(area, tmp, &ptcal_list, list) { + /* disable ptcal on this node */ + if (rtas_call(ptcal_stop_tok, 1, 1, NULL, area->nid)) { + printk(KERN_ERR "%s: error disabling PTCAL " + "on node %d!\n", __FUNCTION__, + area->nid); + ret = -EIO; + continue; + } + + /* ensure we can access the PTCAL area */ + memset(page_address(area->pages), 0, + 1 << (area->order + PAGE_SHIFT)); + + /* clean up */ + list_del(&area->list); + __free_pages(area->pages, area->order); + kfree(area); + } + + return ret; +} + +static int cbe_ptcal_notify_reboot(struct notifier_block *nb, + unsigned long code, void *data) +{ + return cbe_ptcal_disable(); +} + +static struct notifier_block cbe_ptcal_reboot_notifier = { + .notifier_call = cbe_ptcal_notify_reboot +}; + +int __init cbe_ptcal_init(void) +{ + int ret; + ptcal_start_tok = rtas_token("ibm,cbe-start-ptcal"); + ptcal_stop_tok = rtas_token("ibm,cbe-stop-ptcal"); + + if (ptcal_start_tok == RTAS_UNKNOWN_SERVICE + || ptcal_stop_tok == RTAS_UNKNOWN_SERVICE) + return -ENODEV; + + ret = register_reboot_notifier(&cbe_ptcal_reboot_notifier); + if (ret) { + printk(KERN_ERR "Can't disable PTCAL, so not enabling\n"); + return ret; + } + + return cbe_ptcal_enable(); +} + +arch_initcall(cbe_ptcal_init); + void __init cbe_ras_init(void) { unsigned long hid0; diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c index 36989c2eee66..54b96183cb64 100644 --- a/arch/powerpc/platforms/cell/setup.c +++ b/arch/powerpc/platforms/cell/setup.c @@ -71,7 +71,7 @@ static void cell_show_cpuinfo(struct seq_file *m) root = of_find_node_by_path("/"); if (root) - model = get_property(root, "model", NULL); + model = of_get_property(root, "model", NULL); seq_printf(m, "machine\t\t: CHRP %s\n", model); of_node_put(root); } @@ -190,15 +190,6 @@ static int __init cell_probe(void) return 1; } -/* - * Cell has no legacy IO; anything calling this function has to - * fail or bad things will happen - */ -static int cell_check_legacy_ioport(unsigned int baseport) -{ - return -ENODEV; -} - define_machine(cell) { .name = "Cell", .probe = cell_probe, @@ -211,7 +202,6 @@ define_machine(cell) { .get_rtc_time = rtas_get_rtc_time, .set_rtc_time = rtas_set_rtc_time, .calibrate_decr = generic_calibrate_decr, - .check_legacy_ioport = cell_check_legacy_ioport, .progress = cell_progress, .init_IRQ = cell_init_irq, .pci_setup_phb = rtas_setup_phb, diff --git a/arch/powerpc/platforms/cell/spider-pic.c b/arch/powerpc/platforms/cell/spider-pic.c index 21a9ebd4978e..fb1f15797bbb 100644 --- a/arch/powerpc/platforms/cell/spider-pic.c +++ b/arch/powerpc/platforms/cell/spider-pic.c @@ -254,25 +254,25 @@ static unsigned int __init spider_find_cascade_and_node(struct spider_pic *pic) } /* Now do the horrible hacks */ - tmp = get_property(pic->of_node, "#interrupt-cells", NULL); + tmp = of_get_property(pic->of_node, "#interrupt-cells", NULL); if (tmp == NULL) return NO_IRQ; intsize = *tmp; - imap = get_property(pic->of_node, "interrupt-map", &imaplen); + imap = of_get_property(pic->of_node, "interrupt-map", &imaplen); if (imap == NULL || imaplen < (intsize + 1)) return NO_IRQ; iic = of_find_node_by_phandle(imap[intsize]); if (iic == NULL) return NO_IRQ; imap += intsize + 1; - tmp = get_property(iic, "#interrupt-cells", NULL); + tmp = of_get_property(iic, "#interrupt-cells", NULL); if (tmp == NULL) return NO_IRQ; intsize = *tmp; /* Assume unit is last entry of interrupt specifier */ unit = imap[intsize - 1]; /* Ok, we have a unit, now let's try to get the node */ - tmp = get_property(iic, "ibm,interrupt-server-ranges", NULL); + tmp = of_get_property(iic, "ibm,interrupt-server-ranges", NULL); if (tmp == NULL) { of_node_put(iic); return NO_IRQ; diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index eba7a2641dce..fec51525252e 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -36,12 +36,14 @@ #include <asm/xmon.h> const struct spu_management_ops *spu_management_ops; +EXPORT_SYMBOL_GPL(spu_management_ops); + const struct spu_priv1_ops *spu_priv1_ops; static struct list_head spu_list[MAX_NUMNODES]; static LIST_HEAD(spu_full_list); static DEFINE_MUTEX(spu_mutex); -static spinlock_t spu_list_lock = SPIN_LOCK_UNLOCKED; +static DEFINE_SPINLOCK(spu_list_lock); EXPORT_SYMBOL_GPL(spu_priv1_ops); @@ -290,7 +292,6 @@ spu_irq_class_1(int irq, void *data) return stat ? IRQ_HANDLED : IRQ_NONE; } -EXPORT_SYMBOL_GPL(spu_irq_class_1_bottom); static irqreturn_t spu_irq_class_2(int irq, void *data) @@ -431,10 +432,11 @@ struct spu *spu_alloc_node(int node) spu = list_entry(spu_list[node].next, struct spu, list); list_del_init(&spu->list); pr_debug("Got SPU %d %d\n", spu->number, spu->node); - spu_init_channels(spu); } mutex_unlock(&spu_mutex); + if (spu) + spu_init_channels(spu); return spu; } EXPORT_SYMBOL_GPL(spu_alloc_node); @@ -461,108 +463,6 @@ void spu_free(struct spu *spu) } EXPORT_SYMBOL_GPL(spu_free); -static int spu_handle_mm_fault(struct spu *spu) -{ - struct mm_struct *mm = spu->mm; - struct vm_area_struct *vma; - u64 ea, dsisr, is_write; - int ret; - - ea = spu->dar; - dsisr = spu->dsisr; -#if 0 - if (!IS_VALID_EA(ea)) { - return -EFAULT; - } -#endif /* XXX */ - if (mm == NULL) { - return -EFAULT; - } - if (mm->pgd == NULL) { - return -EFAULT; - } - - down_read(&mm->mmap_sem); - vma = find_vma(mm, ea); - if (!vma) - goto bad_area; - if (vma->vm_start <= ea) - goto good_area; - if (!(vma->vm_flags & VM_GROWSDOWN)) - goto bad_area; -#if 0 - if (expand_stack(vma, ea)) - goto bad_area; -#endif /* XXX */ -good_area: - is_write = dsisr & MFC_DSISR_ACCESS_PUT; - if (is_write) { - if (!(vma->vm_flags & VM_WRITE)) - goto bad_area; - } else { - if (dsisr & MFC_DSISR_ACCESS_DENIED) - goto bad_area; - if (!(vma->vm_flags & (VM_READ | VM_EXEC))) - goto bad_area; - } - ret = 0; - switch (handle_mm_fault(mm, vma, ea, is_write)) { - case VM_FAULT_MINOR: - current->min_flt++; - break; - case VM_FAULT_MAJOR: - current->maj_flt++; - break; - case VM_FAULT_SIGBUS: - ret = -EFAULT; - goto bad_area; - case VM_FAULT_OOM: - ret = -ENOMEM; - goto bad_area; - default: - BUG(); - } - up_read(&mm->mmap_sem); - return ret; - -bad_area: - up_read(&mm->mmap_sem); - return -EFAULT; -} - -int spu_irq_class_1_bottom(struct spu *spu) -{ - u64 ea, dsisr, access, error = 0UL; - int ret = 0; - - ea = spu->dar; - dsisr = spu->dsisr; - if (dsisr & (MFC_DSISR_PTE_NOT_FOUND | MFC_DSISR_ACCESS_DENIED)) { - u64 flags; - - access = (_PAGE_PRESENT | _PAGE_USER); - access |= (dsisr & MFC_DSISR_ACCESS_PUT) ? _PAGE_RW : 0UL; - local_irq_save(flags); - if (hash_page(ea, access, 0x300) != 0) - error |= CLASS1_ENABLE_STORAGE_FAULT_INTR; - local_irq_restore(flags); - } - if (error & CLASS1_ENABLE_STORAGE_FAULT_INTR) { - if ((ret = spu_handle_mm_fault(spu)) != 0) - error |= CLASS1_ENABLE_STORAGE_FAULT_INTR; - else - error &= ~CLASS1_ENABLE_STORAGE_FAULT_INTR; - } - spu->dar = 0UL; - spu->dsisr = 0UL; - if (!error) { - spu_restart_dma(spu); - } else { - spu->dma_callback(spu, SPE_EVENT_SPE_DATA_STORAGE); - } - return ret; -} - struct sysdev_class spu_sysdev_class = { set_kset_name("spu") }; @@ -636,12 +536,6 @@ static int spu_create_sysdev(struct spu *spu) return 0; } -static void spu_destroy_sysdev(struct spu *spu) -{ - sysfs_remove_device_from_node(&spu->sysdev, spu->node); - sysdev_unregister(&spu->sysdev); -} - static int __init create_spu(void *data) { struct spu *spu; @@ -693,58 +587,37 @@ out: return ret; } -static void destroy_spu(struct spu *spu) -{ - list_del_init(&spu->list); - list_del_init(&spu->full_list); - - spu_destroy_sysdev(spu); - spu_free_irqs(spu); - spu_destroy_spu(spu); - kfree(spu); -} - -static void cleanup_spu_base(void) -{ - struct spu *spu, *tmp; - int node; - - mutex_lock(&spu_mutex); - for (node = 0; node < MAX_NUMNODES; node++) { - list_for_each_entry_safe(spu, tmp, &spu_list[node], list) - destroy_spu(spu); - } - mutex_unlock(&spu_mutex); - sysdev_class_unregister(&spu_sysdev_class); -} -module_exit(cleanup_spu_base); - static int __init init_spu_base(void) { - int i, ret; + int i, ret = 0; + + for (i = 0; i < MAX_NUMNODES; i++) + INIT_LIST_HEAD(&spu_list[i]); if (!spu_management_ops) - return 0; + goto out; /* create sysdev class for spus */ ret = sysdev_class_register(&spu_sysdev_class); if (ret) - return ret; - - for (i = 0; i < MAX_NUMNODES; i++) - INIT_LIST_HEAD(&spu_list[i]); + goto out; ret = spu_enumerate_spus(create_spu); if (ret) { printk(KERN_WARNING "%s: Error initializing spus\n", __FUNCTION__); - cleanup_spu_base(); - return ret; + goto out_unregister_sysdev_class; } xmon_register_spus(&spu_full_list); + return 0; + + out_unregister_sysdev_class: + sysdev_class_unregister(&spu_sysdev_class); + out: + return ret; } module_init(init_spu_base); diff --git a/arch/powerpc/platforms/cell/spu_coredump.c b/arch/powerpc/platforms/cell/spu_coredump.c index 6915b418ee73..4fd37ff1e210 100644 --- a/arch/powerpc/platforms/cell/spu_coredump.c +++ b/arch/powerpc/platforms/cell/spu_coredump.c @@ -26,19 +26,18 @@ #include <asm/spu.h> -static struct spu_coredump_calls spu_coredump_calls; +static struct spu_coredump_calls *spu_coredump_calls; static DEFINE_MUTEX(spu_coredump_mutex); int arch_notes_size(void) { long ret; - struct module *owner = spu_coredump_calls.owner; ret = -ENOSYS; mutex_lock(&spu_coredump_mutex); - if (owner && try_module_get(owner)) { - ret = spu_coredump_calls.arch_notes_size(); - module_put(owner); + if (spu_coredump_calls && try_module_get(spu_coredump_calls->owner)) { + ret = spu_coredump_calls->arch_notes_size(); + module_put(spu_coredump_calls->owner); } mutex_unlock(&spu_coredump_mutex); return ret; @@ -46,36 +45,35 @@ int arch_notes_size(void) void arch_write_notes(struct file *file) { - struct module *owner = spu_coredump_calls.owner; - mutex_lock(&spu_coredump_mutex); - if (owner && try_module_get(owner)) { - spu_coredump_calls.arch_write_notes(file); - module_put(owner); + if (spu_coredump_calls && try_module_get(spu_coredump_calls->owner)) { + spu_coredump_calls->arch_write_notes(file); + module_put(spu_coredump_calls->owner); } mutex_unlock(&spu_coredump_mutex); } int register_arch_coredump_calls(struct spu_coredump_calls *calls) { - if (spu_coredump_calls.owner) - return -EBUSY; + int ret = 0; + mutex_lock(&spu_coredump_mutex); - spu_coredump_calls.arch_notes_size = calls->arch_notes_size; - spu_coredump_calls.arch_write_notes = calls->arch_write_notes; - spu_coredump_calls.owner = calls->owner; + if (spu_coredump_calls) + ret = -EBUSY; + else + spu_coredump_calls = calls; mutex_unlock(&spu_coredump_mutex); - return 0; + return ret; } EXPORT_SYMBOL_GPL(register_arch_coredump_calls); void unregister_arch_coredump_calls(struct spu_coredump_calls *calls) { - BUG_ON(spu_coredump_calls.owner != calls->owner); + BUG_ON(spu_coredump_calls != calls); mutex_lock(&spu_coredump_mutex); - spu_coredump_calls.owner = NULL; + spu_coredump_calls = NULL; mutex_unlock(&spu_coredump_mutex); } EXPORT_SYMBOL_GPL(unregister_arch_coredump_calls); diff --git a/arch/powerpc/platforms/cell/spu_manage.c b/arch/powerpc/platforms/cell/spu_manage.c index e34599f53d28..1d4562ae463d 100644 --- a/arch/powerpc/platforms/cell/spu_manage.c +++ b/arch/powerpc/platforms/cell/spu_manage.c @@ -48,11 +48,11 @@ static u64 __init find_spu_unit_number(struct device_node *spe) { const unsigned int *prop; int proplen; - prop = get_property(spe, "unit-id", &proplen); + prop = of_get_property(spe, "unit-id", &proplen); if (proplen == 4) return (u64)*prop; - prop = get_property(spe, "reg", &proplen); + prop = of_get_property(spe, "reg", &proplen); if (proplen == 4) return (u64)*prop; @@ -76,12 +76,12 @@ static int __init spu_map_interrupts_old(struct spu *spu, int nid; /* Get the interrupt source unit from the device-tree */ - tmp = get_property(np, "isrc", NULL); + tmp = of_get_property(np, "isrc", NULL); if (!tmp) return -ENODEV; isrc = tmp[0]; - tmp = get_property(np->parent->parent, "node-id", NULL); + tmp = of_get_property(np->parent->parent, "node-id", NULL); if (!tmp) { printk(KERN_WARNING "%s: can't find node-id\n", __FUNCTION__); nid = spu->node; @@ -110,7 +110,7 @@ static void __iomem * __init spu_map_prop_old(struct spu *spu, } __attribute__((packed)) *prop; int proplen; - prop = get_property(n, name, &proplen); + prop = of_get_property(n, name, &proplen); if (prop == NULL || proplen != sizeof (struct address_prop)) return NULL; @@ -124,11 +124,11 @@ static int __init spu_map_device_old(struct spu *spu) int ret; ret = -ENODEV; - spu->name = get_property(node, "name", NULL); + spu->name = of_get_property(node, "name", NULL); if (!spu->name) goto out; - prop = get_property(node, "local-store", NULL); + prop = of_get_property(node, "local-store", NULL); if (!prop) goto out; spu->local_store_phys = *(unsigned long *)prop; @@ -139,7 +139,7 @@ static int __init spu_map_device_old(struct spu *spu) if (!spu->local_store) goto out; - prop = get_property(node, "problem", NULL); + prop = of_get_property(node, "problem", NULL); if (!prop) goto out_unmap; spu->problem_phys = *(unsigned long *)prop; @@ -226,7 +226,7 @@ static int __init spu_map_device(struct spu *spu) struct device_node *np = spu->devnode; int ret = -ENODEV; - spu->name = get_property(np, "name", NULL); + spu->name = of_get_property(np, "name", NULL); if (!spu->name) goto out; diff --git a/arch/powerpc/platforms/cell/spufs/Makefile b/arch/powerpc/platforms/cell/spufs/Makefile index 472217d19faf..2cd89c11af5a 100644 --- a/arch/powerpc/platforms/cell/spufs/Makefile +++ b/arch/powerpc/platforms/cell/spufs/Makefile @@ -1,4 +1,4 @@ -obj-y += switch.o +obj-y += switch.o fault.o obj-$(CONFIG_SPU_FS) += spufs.o spufs-y += inode.o file.o context.o syscalls.o coredump.o diff --git a/arch/powerpc/platforms/cell/spufs/backing_ops.c b/arch/powerpc/platforms/cell/spufs/backing_ops.c index 1898f0d3a8b8..3322528fa6eb 100644 --- a/arch/powerpc/platforms/cell/spufs/backing_ops.c +++ b/arch/powerpc/platforms/cell/spufs/backing_ops.c @@ -350,6 +350,11 @@ static int spu_backing_send_mfc_command(struct spu_context *ctx, return ret; } +static void spu_backing_restart_dma(struct spu_context *ctx) +{ + /* nothing to do here */ +} + struct spu_context_ops spu_backing_ops = { .mbox_read = spu_backing_mbox_read, .mbox_stat_read = spu_backing_mbox_stat_read, @@ -376,4 +381,5 @@ struct spu_context_ops spu_backing_ops = { .read_mfc_tagstatus = spu_backing_read_mfc_tagstatus, .get_mfc_free_elements = spu_backing_get_mfc_free_elements, .send_mfc_command = spu_backing_send_mfc_command, + .restart_dma = spu_backing_restart_dma, }; diff --git a/arch/powerpc/platforms/cell/spufs/context.c b/arch/powerpc/platforms/cell/spufs/context.c index 04ad2e364e97..a87d9ca3dba2 100644 --- a/arch/powerpc/platforms/cell/spufs/context.c +++ b/arch/powerpc/platforms/cell/spufs/context.c @@ -41,9 +41,10 @@ struct spu_context *alloc_spu_context(struct spu_gang *gang) goto out_free; } spin_lock_init(&ctx->mmio_lock); + spin_lock_init(&ctx->mapping_lock); kref_init(&ctx->kref); mutex_init(&ctx->state_mutex); - init_MUTEX(&ctx->run_sema); + mutex_init(&ctx->run_mutex); init_waitqueue_head(&ctx->ibox_wq); init_waitqueue_head(&ctx->wbox_wq); init_waitqueue_head(&ctx->stop_wq); @@ -51,6 +52,7 @@ struct spu_context *alloc_spu_context(struct spu_gang *gang) ctx->state = SPU_STATE_SAVED; ctx->ops = &spu_backing_ops; ctx->owner = get_task_mm(current); + INIT_LIST_HEAD(&ctx->rq); if (gang) spu_gang_add_ctx(gang, ctx); ctx->rt_priority = current->rt_priority; @@ -75,6 +77,7 @@ void destroy_spu_context(struct kref *kref) spu_fini_csa(&ctx->csa); if (ctx->gang) spu_gang_remove_ctx(ctx->gang, ctx); + BUG_ON(!list_empty(&ctx->rq)); kfree(ctx); } @@ -119,46 +122,6 @@ void spu_unmap_mappings(struct spu_context *ctx) } /** - * spu_acquire_exclusive - lock spu contex and protect against userspace access - * @ctx: spu contex to lock - * - * Note: - * Returns 0 and with the context locked on success - * Returns negative error and with the context _unlocked_ on failure. - */ -int spu_acquire_exclusive(struct spu_context *ctx) -{ - int ret = -EINVAL; - - spu_acquire(ctx); - /* - * Context is about to be freed, so we can't acquire it anymore. - */ - if (!ctx->owner) - goto out_unlock; - - if (ctx->state == SPU_STATE_SAVED) { - ret = spu_activate(ctx, 0); - if (ret) - goto out_unlock; - } else { - /* - * We need to exclude userspace access to the context. - * - * To protect against memory access we invalidate all ptes - * and make sure the pagefault handlers block on the mutex. - */ - spu_unmap_mappings(ctx); - } - - return 0; - - out_unlock: - spu_release(ctx); - return ret; -} - -/** * spu_acquire_runnable - lock spu contex and make sure it is in runnable state * @ctx: spu contex to lock * diff --git a/arch/powerpc/platforms/cell/spufs/coredump.c b/arch/powerpc/platforms/cell/spufs/coredump.c index 725e19561159..5d9ad5a0307b 100644 --- a/arch/powerpc/platforms/cell/spufs/coredump.c +++ b/arch/powerpc/platforms/cell/spufs/coredump.c @@ -169,12 +169,12 @@ static void spufs_arch_write_note(struct spufs_ctx_info *ctx_info, int i, struct spu_context *ctx; loff_t pos = 0; int sz, dfd, rc, total = 0; - const int bufsz = 4096; + const int bufsz = PAGE_SIZE; char *name; char fullname[80], *buf; struct elf_note en; - buf = kmalloc(bufsz, GFP_KERNEL); + buf = (void *)get_zeroed_page(GFP_KERNEL); if (!buf) return; @@ -187,9 +187,8 @@ static void spufs_arch_write_note(struct spufs_ctx_info *ctx_info, int i, sz = spufs_coredump_read[i].size; ctx = ctx_info->ctx; - if (!ctx) { - return; - } + if (!ctx) + goto out; sprintf(fullname, "SPU/%d/%s", dfd, name); en.n_namesz = strlen(fullname) + 1; @@ -197,23 +196,25 @@ static void spufs_arch_write_note(struct spufs_ctx_info *ctx_info, int i, en.n_type = NT_SPU; if (!spufs_dump_write(file, &en, sizeof(en))) - return; + goto out; if (!spufs_dump_write(file, fullname, en.n_namesz)) - return; + goto out; if (!spufs_dump_seek(file, roundup((unsigned long)file->f_pos, 4))) - return; + goto out; do { rc = do_coredump_read(i, ctx, buf, bufsz, &pos); if (rc > 0) { if (!spufs_dump_write(file, buf, rc)) - return; + goto out; total += rc; } } while (rc == bufsz && total < sz); spufs_dump_seek(file, roundup((unsigned long)file->f_pos - total + sz, 4)); +out: + free_page((unsigned long)buf); } static void spufs_arch_write_notes(struct file *file) diff --git a/arch/powerpc/platforms/cell/spufs/fault.c b/arch/powerpc/platforms/cell/spufs/fault.c new file mode 100644 index 000000000000..0f75c07e29d8 --- /dev/null +++ b/arch/powerpc/platforms/cell/spufs/fault.c @@ -0,0 +1,211 @@ +/* + * Low-level SPU handling + * + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 + * + * Author: Arnd Bergmann <arndb@de.ibm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/module.h> + +#include <asm/spu.h> +#include <asm/spu_csa.h> + +#include "spufs.h" + +/* + * This ought to be kept in sync with the powerpc specific do_page_fault + * function. Currently, there are a few corner cases that we haven't had + * to handle fortunately. + */ +static int spu_handle_mm_fault(struct mm_struct *mm, unsigned long ea, unsigned long dsisr) +{ + struct vm_area_struct *vma; + unsigned long is_write; + int ret; + +#if 0 + if (!IS_VALID_EA(ea)) { + return -EFAULT; + } +#endif /* XXX */ + if (mm == NULL) { + return -EFAULT; + } + if (mm->pgd == NULL) { + return -EFAULT; + } + + down_read(&mm->mmap_sem); + vma = find_vma(mm, ea); + if (!vma) + goto bad_area; + if (vma->vm_start <= ea) + goto good_area; + if (!(vma->vm_flags & VM_GROWSDOWN)) + goto bad_area; + if (expand_stack(vma, ea)) + goto bad_area; +good_area: + is_write = dsisr & MFC_DSISR_ACCESS_PUT; + if (is_write) { + if (!(vma->vm_flags & VM_WRITE)) + goto bad_area; + } else { + if (dsisr & MFC_DSISR_ACCESS_DENIED) + goto bad_area; + if (!(vma->vm_flags & (VM_READ | VM_EXEC))) + goto bad_area; + } + ret = 0; + switch (handle_mm_fault(mm, vma, ea, is_write)) { + case VM_FAULT_MINOR: + current->min_flt++; + break; + case VM_FAULT_MAJOR: + current->maj_flt++; + break; + case VM_FAULT_SIGBUS: + ret = -EFAULT; + goto bad_area; + case VM_FAULT_OOM: + ret = -ENOMEM; + goto bad_area; + default: + BUG(); + } + up_read(&mm->mmap_sem); + return ret; + +bad_area: + up_read(&mm->mmap_sem); + return -EFAULT; +} + +static void spufs_handle_dma_error(struct spu_context *ctx, + unsigned long ea, int type) +{ + if (ctx->flags & SPU_CREATE_EVENTS_ENABLED) { + ctx->event_return |= type; + wake_up_all(&ctx->stop_wq); + } else { + siginfo_t info; + memset(&info, 0, sizeof(info)); + + switch (type) { + case SPE_EVENT_INVALID_DMA: + info.si_signo = SIGBUS; + info.si_code = BUS_OBJERR; + break; + case SPE_EVENT_SPE_DATA_STORAGE: + info.si_signo = SIGBUS; + info.si_addr = (void __user *)ea; + info.si_code = BUS_ADRERR; + break; + case SPE_EVENT_DMA_ALIGNMENT: + info.si_signo = SIGBUS; + /* DAR isn't set for an alignment fault :( */ + info.si_code = BUS_ADRALN; + break; + case SPE_EVENT_SPE_ERROR: + info.si_signo = SIGILL; + info.si_addr = (void __user *)(unsigned long) + ctx->ops->npc_read(ctx) - 4; + info.si_code = ILL_ILLOPC; + break; + } + if (info.si_signo) + force_sig_info(info.si_signo, &info, current); + } +} + +void spufs_dma_callback(struct spu *spu, int type) +{ + spufs_handle_dma_error(spu->ctx, spu->dar, type); +} +EXPORT_SYMBOL_GPL(spufs_dma_callback); + +/* + * bottom half handler for page faults, we can't do this from + * interrupt context, since we might need to sleep. + * we also need to give up the mutex so we can get scheduled + * out while waiting for the backing store. + * + * TODO: try calling hash_page from the interrupt handler first + * in order to speed up the easy case. + */ +int spufs_handle_class1(struct spu_context *ctx) +{ + u64 ea, dsisr, access; + unsigned long flags; + int ret; + + /* + * dar and dsisr get passed from the registers + * to the spu_context, to this function, but not + * back to the spu if it gets scheduled again. + * + * if we don't handle the fault for a saved context + * in time, we can still expect to get the same fault + * the immediately after the context restore. + */ + if (ctx->state == SPU_STATE_RUNNABLE) { + ea = ctx->spu->dar; + dsisr = ctx->spu->dsisr; + ctx->spu->dar= ctx->spu->dsisr = 0; + } else { + ea = ctx->csa.priv1.mfc_dar_RW; + dsisr = ctx->csa.priv1.mfc_dsisr_RW; + ctx->csa.priv1.mfc_dar_RW = 0; + ctx->csa.priv1.mfc_dsisr_RW = 0; + } + + if (!(dsisr & (MFC_DSISR_PTE_NOT_FOUND | MFC_DSISR_ACCESS_DENIED))) + return 0; + + pr_debug("ctx %p: ea %016lx, dsisr %016lx state %d\n", ctx, ea, + dsisr, ctx->state); + + /* we must not hold the lock when entering spu_handle_mm_fault */ + spu_release(ctx); + + access = (_PAGE_PRESENT | _PAGE_USER); + access |= (dsisr & MFC_DSISR_ACCESS_PUT) ? _PAGE_RW : 0UL; + local_irq_save(flags); + ret = hash_page(ea, access, 0x300); + local_irq_restore(flags); + + /* hashing failed, so try the actual fault handler */ + if (ret) + ret = spu_handle_mm_fault(current->mm, ea, dsisr); + + spu_acquire(ctx); + /* + * If we handled the fault successfully and are in runnable + * state, restart the DMA. + * In case of unhandled error report the problem to user space. + */ + if (!ret) { + if (ctx->spu) + ctx->ops->restart_dma(ctx); + } else + spufs_handle_dma_error(ctx, ea, SPE_EVENT_SPE_DATA_STORAGE); + + return ret; +} +EXPORT_SYMBOL_GPL(spufs_handle_class1); diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index 505266a568d4..d010b2464a98 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -44,9 +44,25 @@ spufs_mem_open(struct inode *inode, struct file *file) { struct spufs_inode_info *i = SPUFS_I(inode); struct spu_context *ctx = i->i_ctx; + + spin_lock(&ctx->mapping_lock); file->private_data = ctx; - ctx->local_store = inode->i_mapping; - smp_wmb(); + if (!i->i_openers++) + ctx->local_store = inode->i_mapping; + spin_unlock(&ctx->mapping_lock); + return 0; +} + +static int +spufs_mem_release(struct inode *inode, struct file *file) +{ + struct spufs_inode_info *i = SPUFS_I(inode); + struct spu_context *ctx = i->i_ctx; + + spin_lock(&ctx->mapping_lock); + if (!--i->i_openers) + ctx->local_store = NULL; + spin_unlock(&ctx->mapping_lock); return 0; } @@ -149,6 +165,7 @@ spufs_mem_mmap(struct file *file, struct vm_area_struct *vma) static const struct file_operations spufs_mem_fops = { .open = spufs_mem_open, + .release = spufs_mem_release, .read = spufs_mem_read, .write = spufs_mem_write, .llseek = generic_file_llseek, @@ -238,16 +255,33 @@ static int spufs_cntl_open(struct inode *inode, struct file *file) struct spufs_inode_info *i = SPUFS_I(inode); struct spu_context *ctx = i->i_ctx; + spin_lock(&ctx->mapping_lock); file->private_data = ctx; - ctx->cntl = inode->i_mapping; - smp_wmb(); + if (!i->i_openers++) + ctx->cntl = inode->i_mapping; + spin_unlock(&ctx->mapping_lock); return simple_attr_open(inode, file, spufs_cntl_get, spufs_cntl_set, "0x%08lx"); } +static int +spufs_cntl_release(struct inode *inode, struct file *file) +{ + struct spufs_inode_info *i = SPUFS_I(inode); + struct spu_context *ctx = i->i_ctx; + + simple_attr_close(inode, file); + + spin_lock(&ctx->mapping_lock); + if (!--i->i_openers) + ctx->cntl = NULL; + spin_unlock(&ctx->mapping_lock); + return 0; +} + static const struct file_operations spufs_cntl_fops = { .open = spufs_cntl_open, - .release = simple_attr_close, + .release = spufs_cntl_release, .read = simple_attr_read, .write = simple_attr_write, .mmap = spufs_cntl_mmap, @@ -723,12 +757,28 @@ static int spufs_signal1_open(struct inode *inode, struct file *file) { struct spufs_inode_info *i = SPUFS_I(inode); struct spu_context *ctx = i->i_ctx; + + spin_lock(&ctx->mapping_lock); file->private_data = ctx; - ctx->signal1 = inode->i_mapping; - smp_wmb(); + if (!i->i_openers++) + ctx->signal1 = inode->i_mapping; + spin_unlock(&ctx->mapping_lock); return nonseekable_open(inode, file); } +static int +spufs_signal1_release(struct inode *inode, struct file *file) +{ + struct spufs_inode_info *i = SPUFS_I(inode); + struct spu_context *ctx = i->i_ctx; + + spin_lock(&ctx->mapping_lock); + if (!--i->i_openers) + ctx->signal1 = NULL; + spin_unlock(&ctx->mapping_lock); + return 0; +} + static ssize_t __spufs_signal1_read(struct spu_context *ctx, char __user *buf, size_t len, loff_t *pos) { @@ -821,6 +871,7 @@ static int spufs_signal1_mmap(struct file *file, struct vm_area_struct *vma) static const struct file_operations spufs_signal1_fops = { .open = spufs_signal1_open, + .release = spufs_signal1_release, .read = spufs_signal1_read, .write = spufs_signal1_write, .mmap = spufs_signal1_mmap, @@ -830,12 +881,28 @@ static int spufs_signal2_open(struct inode *inode, struct file *file) { struct spufs_inode_info *i = SPUFS_I(inode); struct spu_context *ctx = i->i_ctx; + + spin_lock(&ctx->mapping_lock); file->private_data = ctx; - ctx->signal2 = inode->i_mapping; - smp_wmb(); + if (!i->i_openers++) + ctx->signal2 = inode->i_mapping; + spin_unlock(&ctx->mapping_lock); return nonseekable_open(inode, file); } +static int +spufs_signal2_release(struct inode *inode, struct file *file) +{ + struct spufs_inode_info *i = SPUFS_I(inode); + struct spu_context *ctx = i->i_ctx; + + spin_lock(&ctx->mapping_lock); + if (!--i->i_openers) + ctx->signal2 = NULL; + spin_unlock(&ctx->mapping_lock); + return 0; +} + static ssize_t __spufs_signal2_read(struct spu_context *ctx, char __user *buf, size_t len, loff_t *pos) { @@ -932,6 +999,7 @@ static int spufs_signal2_mmap(struct file *file, struct vm_area_struct *vma) static const struct file_operations spufs_signal2_fops = { .open = spufs_signal2_open, + .release = spufs_signal2_release, .read = spufs_signal2_read, .write = spufs_signal2_write, .mmap = spufs_signal2_mmap, @@ -1031,13 +1099,30 @@ static int spufs_mss_open(struct inode *inode, struct file *file) struct spu_context *ctx = i->i_ctx; file->private_data = i->i_ctx; - ctx->mss = inode->i_mapping; - smp_wmb(); + + spin_lock(&ctx->mapping_lock); + if (!i->i_openers++) + ctx->mss = inode->i_mapping; + spin_unlock(&ctx->mapping_lock); return nonseekable_open(inode, file); } +static int +spufs_mss_release(struct inode *inode, struct file *file) +{ + struct spufs_inode_info *i = SPUFS_I(inode); + struct spu_context *ctx = i->i_ctx; + + spin_lock(&ctx->mapping_lock); + if (!--i->i_openers) + ctx->mss = NULL; + spin_unlock(&ctx->mapping_lock); + return 0; +} + static const struct file_operations spufs_mss_fops = { .open = spufs_mss_open, + .release = spufs_mss_release, .mmap = spufs_mss_mmap, }; @@ -1072,14 +1157,30 @@ static int spufs_psmap_open(struct inode *inode, struct file *file) struct spufs_inode_info *i = SPUFS_I(inode); struct spu_context *ctx = i->i_ctx; + spin_lock(&ctx->mapping_lock); file->private_data = i->i_ctx; - ctx->psmap = inode->i_mapping; - smp_wmb(); + if (!i->i_openers++) + ctx->psmap = inode->i_mapping; + spin_unlock(&ctx->mapping_lock); return nonseekable_open(inode, file); } +static int +spufs_psmap_release(struct inode *inode, struct file *file) +{ + struct spufs_inode_info *i = SPUFS_I(inode); + struct spu_context *ctx = i->i_ctx; + + spin_lock(&ctx->mapping_lock); + if (!--i->i_openers) + ctx->psmap = NULL; + spin_unlock(&ctx->mapping_lock); + return 0; +} + static const struct file_operations spufs_psmap_fops = { .open = spufs_psmap_open, + .release = spufs_psmap_release, .mmap = spufs_psmap_mmap, }; @@ -1126,12 +1227,27 @@ static int spufs_mfc_open(struct inode *inode, struct file *file) if (atomic_read(&inode->i_count) != 1) return -EBUSY; + spin_lock(&ctx->mapping_lock); file->private_data = ctx; - ctx->mfc = inode->i_mapping; - smp_wmb(); + if (!i->i_openers++) + ctx->mfc = inode->i_mapping; + spin_unlock(&ctx->mapping_lock); return nonseekable_open(inode, file); } +static int +spufs_mfc_release(struct inode *inode, struct file *file) +{ + struct spufs_inode_info *i = SPUFS_I(inode); + struct spu_context *ctx = i->i_ctx; + + spin_lock(&ctx->mapping_lock); + if (!--i->i_openers) + ctx->mfc = NULL; + spin_unlock(&ctx->mapping_lock); + return 0; +} + /* interrupt-level mfc callback function. */ void spufs_mfc_callback(struct spu *spu) { @@ -1313,7 +1429,10 @@ static ssize_t spufs_mfc_write(struct file *file, const char __user *buffer, if (ret) goto out; - spu_acquire_runnable(ctx, 0); + ret = spu_acquire_runnable(ctx, 0); + if (ret) + goto out; + if (file->f_flags & O_NONBLOCK) { ret = ctx->ops->send_mfc_command(ctx, &cmd); } else { @@ -1399,6 +1518,7 @@ static int spufs_mfc_fasync(int fd, struct file *file, int on) static const struct file_operations spufs_mfc_fops = { .open = spufs_mfc_open, + .release = spufs_mfc_release, .read = spufs_mfc_read, .write = spufs_mfc_write, .poll = spufs_mfc_poll, diff --git a/arch/powerpc/platforms/cell/spufs/hw_ops.c b/arch/powerpc/platforms/cell/spufs/hw_ops.c index ae42e03b8c86..428875c5e4ec 100644 --- a/arch/powerpc/platforms/cell/spufs/hw_ops.c +++ b/arch/powerpc/platforms/cell/spufs/hw_ops.c @@ -296,6 +296,14 @@ static int spu_hw_send_mfc_command(struct spu_context *ctx, } } +static void spu_hw_restart_dma(struct spu_context *ctx) +{ + struct spu_priv2 __iomem *priv2 = ctx->spu->priv2; + + if (!test_bit(SPU_CONTEXT_SWITCH_PENDING, &ctx->spu->flags)) + out_be64(&priv2->mfc_control_RW, MFC_CNTL_RESTART_DMA_COMMAND); +} + struct spu_context_ops spu_hw_ops = { .mbox_read = spu_hw_mbox_read, .mbox_stat_read = spu_hw_mbox_stat_read, @@ -320,4 +328,5 @@ struct spu_context_ops spu_hw_ops = { .read_mfc_tagstatus = spu_hw_read_mfc_tagstatus, .get_mfc_free_elements = spu_hw_get_mfc_free_elements, .send_mfc_command = spu_hw_send_mfc_command, + .restart_dma = spu_hw_restart_dma, }; diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c index 8079983ef94f..13e4f70ec8c0 100644 --- a/arch/powerpc/platforms/cell/spufs/inode.c +++ b/arch/powerpc/platforms/cell/spufs/inode.c @@ -36,6 +36,7 @@ #include <asm/prom.h> #include <asm/semaphore.h> #include <asm/spu.h> +#include <asm/spu_priv1.h> #include <asm/uaccess.h> #include "spufs.h" @@ -54,6 +55,7 @@ spufs_alloc_inode(struct super_block *sb) ei->i_gang = NULL; ei->i_ctx = NULL; + ei->i_openers = 0; return &ei->vfs_inode; } @@ -520,13 +522,14 @@ out: /* File system initialization */ enum { - Opt_uid, Opt_gid, Opt_err, + Opt_uid, Opt_gid, Opt_mode, Opt_err, }; static match_table_t spufs_tokens = { - { Opt_uid, "uid=%d" }, - { Opt_gid, "gid=%d" }, - { Opt_err, NULL }, + { Opt_uid, "uid=%d" }, + { Opt_gid, "gid=%d" }, + { Opt_mode, "mode=%o" }, + { Opt_err, NULL }, }; static int @@ -553,6 +556,11 @@ spufs_parse_options(char *options, struct inode *root) return 0; root->i_gid = option; break; + case Opt_mode: + if (match_octal(&args[0], &option)) + return 0; + root->i_mode = option | S_IFDIR; + break; default: return 0; } @@ -560,6 +568,11 @@ spufs_parse_options(char *options, struct inode *root) return 1; } +static void spufs_exit_isolated_loader(void) +{ + kfree(isolated_loader); +} + static void spufs_init_isolated_loader(void) { @@ -571,7 +584,7 @@ spufs_init_isolated_loader(void) if (!dn) return; - loader = get_property(dn, "loader", &size); + loader = of_get_property(dn, "loader", &size); if (!loader) return; @@ -653,6 +666,10 @@ static int __init spufs_init(void) { int ret; + ret = -ENODEV; + if (!spu_management_ops) + goto out; + ret = -ENOMEM; spufs_inode_cache = kmem_cache_create("spufs_inode_cache", sizeof(struct spufs_inode_info), 0, @@ -660,25 +677,29 @@ static int __init spufs_init(void) if (!spufs_inode_cache) goto out; - if (spu_sched_init() != 0) { - kmem_cache_destroy(spufs_inode_cache); - goto out; - } - ret = register_filesystem(&spufs_type); + ret = spu_sched_init(); if (ret) goto out_cache; + ret = register_filesystem(&spufs_type); + if (ret) + goto out_sched; ret = register_spu_syscalls(&spufs_calls); if (ret) goto out_fs; ret = register_arch_coredump_calls(&spufs_coredump_calls); if (ret) - goto out_fs; + goto out_syscalls; spufs_init_isolated_loader(); return 0; + +out_syscalls: + unregister_spu_syscalls(&spufs_calls); out_fs: unregister_filesystem(&spufs_type); +out_sched: + spu_sched_exit(); out_cache: kmem_cache_destroy(spufs_inode_cache); out: @@ -689,6 +710,7 @@ module_init(spufs_init); static void __exit spufs_exit(void) { spu_sched_exit(); + spufs_exit_isolated_loader(); unregister_arch_coredump_calls(&spufs_coredump_calls); unregister_spu_syscalls(&spufs_calls); unregister_filesystem(&spufs_type); diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c index f95a611ca362..57626600b1a4 100644 --- a/arch/powerpc/platforms/cell/spufs/run.c +++ b/arch/powerpc/platforms/cell/spufs/run.c @@ -18,27 +18,6 @@ void spufs_stop_callback(struct spu *spu) wake_up_all(&ctx->stop_wq); } -void spufs_dma_callback(struct spu *spu, int type) -{ - struct spu_context *ctx = spu->ctx; - - if (ctx->flags & SPU_CREATE_EVENTS_ENABLED) { - ctx->event_return |= type; - wake_up_all(&ctx->stop_wq); - } else { - switch (type) { - case SPE_EVENT_DMA_ALIGNMENT: - case SPE_EVENT_SPE_DATA_STORAGE: - case SPE_EVENT_INVALID_DMA: - force_sig(SIGBUS, /* info, */ current); - break; - case SPE_EVENT_SPE_ERROR: - force_sig(SIGILL, /* info */ current); - break; - } - } -} - static inline int spu_stopped(struct spu_context *ctx, u32 * stat) { struct spu *spu; @@ -63,13 +42,18 @@ static int spu_setup_isolated(struct spu_context *ctx) const u32 status_loading = SPU_STATUS_RUNNING | SPU_STATUS_ISOLATED_STATE | SPU_STATUS_ISOLATED_LOAD_STATUS; + ret = -ENODEV; if (!isolated_loader) - return -ENODEV; - - ret = spu_acquire_exclusive(ctx); - if (ret) goto out; + /* + * We need to exclude userspace access to the context. + * + * To protect against memory access we invalidate all ptes + * and make sure the pagefault handlers block on the mutex. + */ + spu_unmap_mappings(ctx); + mfc_cntl = &ctx->spu->priv2->mfc_control_RW; /* purge the MFC DMA queue to ensure no spurious accesses before we @@ -82,7 +66,7 @@ static int spu_setup_isolated(struct spu_context *ctx) printk(KERN_ERR "%s: timeout flushing MFC DMA queue\n", __FUNCTION__); ret = -EIO; - goto out_unlock; + goto out; } cond_resched(); } @@ -119,12 +103,15 @@ static int spu_setup_isolated(struct spu_context *ctx) pr_debug("%s: isolated LOAD failed\n", __FUNCTION__); ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_RUNNABLE); ret = -EACCES; + goto out_drop_priv; + } - } else if (!(status & SPU_STATUS_ISOLATED_STATE)) { + if (!(status & SPU_STATUS_ISOLATED_STATE)) { /* This isn't allowed by the CBEA, but check anyway */ pr_debug("%s: SPU fell out of isolated mode?\n", __FUNCTION__); ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_STOP); ret = -EINVAL; + goto out_drop_priv; } out_drop_priv: @@ -132,30 +119,19 @@ out_drop_priv: sr1 |= MFC_STATE1_PROBLEM_STATE_MASK; spu_mfc_sr1_set(ctx->spu, sr1); -out_unlock: - spu_release(ctx); out: return ret; } -static inline int spu_run_init(struct spu_context *ctx, u32 * npc) +static int spu_run_init(struct spu_context *ctx, u32 * npc) { - int ret; - unsigned long runcntl = SPU_RUNCNTL_RUNNABLE; - - ret = spu_acquire_runnable(ctx, 0); - if (ret) - return ret; - if (ctx->flags & SPU_CREATE_ISOLATE) { + unsigned long runcntl; + if (!(ctx->ops->status_read(ctx) & SPU_STATUS_ISOLATED_STATE)) { - /* Need to release ctx, because spu_setup_isolated will - * acquire it exclusively. - */ - spu_release(ctx); - ret = spu_setup_isolated(ctx); - if (!ret) - ret = spu_acquire_runnable(ctx, 0); + int ret = spu_setup_isolated(ctx); + if (ret) + return ret; } /* if userspace has set the runcntrl register (eg, to issue an @@ -164,16 +140,17 @@ static inline int spu_run_init(struct spu_context *ctx, u32 * npc) (SPU_RUNCNTL_RUNNABLE | SPU_RUNCNTL_ISOLATE); if (runcntl == 0) runcntl = SPU_RUNCNTL_RUNNABLE; + ctx->ops->runcntl_write(ctx, runcntl); } else { spu_start_tick(ctx); ctx->ops->npc_write(ctx, *npc); + ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_RUNNABLE); } - ctx->ops->runcntl_write(ctx, runcntl); - return ret; + return 0; } -static inline int spu_run_fini(struct spu_context *ctx, u32 * npc, +static int spu_run_fini(struct spu_context *ctx, u32 * npc, u32 * status) { int ret = 0; @@ -189,19 +166,27 @@ static inline int spu_run_fini(struct spu_context *ctx, u32 * npc, return ret; } -static inline int spu_reacquire_runnable(struct spu_context *ctx, u32 *npc, +static int spu_reacquire_runnable(struct spu_context *ctx, u32 *npc, u32 *status) { int ret; - if ((ret = spu_run_fini(ctx, npc, status)) != 0) + ret = spu_run_fini(ctx, npc, status); + if (ret) return ret; - if (*status & (SPU_STATUS_STOPPED_BY_STOP | - SPU_STATUS_STOPPED_BY_HALT)) { + + if (*status & (SPU_STATUS_STOPPED_BY_STOP | SPU_STATUS_STOPPED_BY_HALT)) return *status; - } - if ((ret = spu_run_init(ctx, npc)) != 0) + + ret = spu_acquire_runnable(ctx, 0); + if (ret) + return ret; + + ret = spu_run_init(ctx, npc); + if (ret) { + spu_release(ctx); return ret; + } return 0; } @@ -253,17 +238,17 @@ int spu_process_callback(struct spu_context *ctx) { struct spu_syscall_block s; u32 ls_pointer, npc; - char *ls; + void __iomem *ls; long spu_ret; int ret; /* get syscall block from local store */ - npc = ctx->ops->npc_read(ctx); - ls = ctx->ops->get_ls(ctx); - ls_pointer = *(u32*)(ls + npc); + npc = ctx->ops->npc_read(ctx) & ~3; + ls = (void __iomem *)ctx->ops->get_ls(ctx); + ls_pointer = in_be32(ls + npc); if (ls_pointer > (LS_SIZE - sizeof(s))) return -EFAULT; - memcpy(&s, ls + ls_pointer, sizeof (s)); + memcpy_fromio(&s, ls + ls_pointer, sizeof(s)); /* do actual syscall without pinning the spu */ ret = 0; @@ -283,7 +268,7 @@ int spu_process_callback(struct spu_context *ctx) } /* write result, jump over indirect pointer */ - memcpy(ls + ls_pointer, &spu_ret, sizeof (spu_ret)); + memcpy_toio(ls + ls_pointer, &spu_ret, sizeof(spu_ret)); ctx->ops->npc_write(ctx, npc); ctx->ops->runcntl_write(ctx, SPU_RUNCNTL_RUNNABLE); return ret; @@ -292,11 +277,8 @@ int spu_process_callback(struct spu_context *ctx) static inline int spu_process_events(struct spu_context *ctx) { struct spu *spu = ctx->spu; - u64 pte_fault = MFC_DSISR_PTE_NOT_FOUND | MFC_DSISR_ACCESS_DENIED; int ret = 0; - if (spu->dsisr & pte_fault) - ret = spu_irq_class_1_bottom(spu); if (spu->class_0_pending) ret = spu_irq_class_0_bottom(spu); if (!ret && signal_pending(current)) @@ -310,14 +292,21 @@ long spufs_run_spu(struct file *file, struct spu_context *ctx, int ret; u32 status; - if (down_interruptible(&ctx->run_sema)) + if (mutex_lock_interruptible(&ctx->run_mutex)) return -ERESTARTSYS; ctx->ops->master_start(ctx); ctx->event_return = 0; - ret = spu_run_init(ctx, npc); + + ret = spu_acquire_runnable(ctx, 0); if (ret) + return ret; + + ret = spu_run_init(ctx, npc); + if (ret) { + spu_release(ctx); goto out; + } do { ret = spufs_wait(ctx->stop_wq, spu_stopped(ctx, &status)); @@ -330,6 +319,10 @@ long spufs_run_spu(struct file *file, struct spu_context *ctx, break; status &= ~SPU_STATUS_STOPPED_BY_STOP; } + ret = spufs_handle_class1(ctx); + if (ret) + break; + if (unlikely(ctx->state != SPU_STATE_RUNNABLE)) { ret = spu_reacquire_runnable(ctx, npc, &status); if (ret) { @@ -363,6 +356,6 @@ out2: out: *event = ctx->event_return; - up(&ctx->run_sema); + mutex_unlock(&ctx->run_mutex); return ret; } diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 39823cec0844..91030b8abdca 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -71,14 +71,27 @@ static inline int node_allowed(int node) void spu_start_tick(struct spu_context *ctx) { - if (ctx->policy == SCHED_RR) + if (ctx->policy == SCHED_RR) { + /* + * Make sure the exiting bit is cleared. + */ + clear_bit(SPU_SCHED_EXITING, &ctx->sched_flags); + mb(); queue_delayed_work(spu_sched_wq, &ctx->sched_work, SPU_TIMESLICE); + } } void spu_stop_tick(struct spu_context *ctx) { - if (ctx->policy == SCHED_RR) + if (ctx->policy == SCHED_RR) { + /* + * While the work can be rearming normally setting this flag + * makes sure it does not rearm itself anymore. + */ + set_bit(SPU_SCHED_EXITING, &ctx->sched_flags); + mb(); cancel_delayed_work(&ctx->sched_work); + } } void spu_sched_tick(struct work_struct *work) @@ -86,7 +99,15 @@ void spu_sched_tick(struct work_struct *work) struct spu_context *ctx = container_of(work, struct spu_context, sched_work.work); struct spu *spu; - int rearm = 1; + int preempted = 0; + + /* + * If this context is being stopped avoid rescheduling from the + * scheduler tick because we would block on the state_mutex. + * The caller will yield the spu later on anyway. + */ + if (test_bit(SPU_SCHED_EXITING, &ctx->sched_flags)) + return; mutex_lock(&ctx->state_mutex); spu = ctx->spu; @@ -94,12 +115,19 @@ void spu_sched_tick(struct work_struct *work) int best = sched_find_first_bit(spu_prio->bitmap); if (best <= ctx->prio) { spu_deactivate(ctx); - rearm = 0; + preempted = 1; } } mutex_unlock(&ctx->state_mutex); - if (rearm) + if (preempted) { + /* + * We need to break out of the wait loop in spu_run manually + * to ensure this context gets put on the runqueue again + * ASAP. + */ + wake_up(&ctx->stop_wq); + } else spu_start_tick(ctx); } @@ -208,58 +236,40 @@ static void spu_unbind_context(struct spu *spu, struct spu_context *ctx) * spu_add_to_rq - add a context to the runqueue * @ctx: context to add */ -static void spu_add_to_rq(struct spu_context *ctx) +static void __spu_add_to_rq(struct spu_context *ctx) { - spin_lock(&spu_prio->runq_lock); - list_add_tail(&ctx->rq, &spu_prio->runq[ctx->prio]); - set_bit(ctx->prio, spu_prio->bitmap); - spin_unlock(&spu_prio->runq_lock); -} + int prio = ctx->prio; -/** - * spu_del_from_rq - remove a context from the runqueue - * @ctx: context to remove - */ -static void spu_del_from_rq(struct spu_context *ctx) -{ - spin_lock(&spu_prio->runq_lock); - list_del_init(&ctx->rq); - if (list_empty(&spu_prio->runq[ctx->prio])) - clear_bit(ctx->prio, spu_prio->bitmap); - spin_unlock(&spu_prio->runq_lock); + list_add_tail(&ctx->rq, &spu_prio->runq[prio]); + set_bit(prio, spu_prio->bitmap); } -/** - * spu_grab_context - remove one context from the runqueue - * @prio: priority of the context to be removed - * - * This function removes one context from the runqueue for priority @prio. - * If there is more than one context with the given priority the first - * task on the runqueue will be taken. - * - * Returns the spu_context it just removed. - * - * Must be called with spu_prio->runq_lock held. - */ -static struct spu_context *spu_grab_context(int prio) +static void __spu_del_from_rq(struct spu_context *ctx) { - struct list_head *rq = &spu_prio->runq[prio]; + int prio = ctx->prio; - if (list_empty(rq)) - return NULL; - return list_entry(rq->next, struct spu_context, rq); + if (!list_empty(&ctx->rq)) + list_del_init(&ctx->rq); + if (list_empty(&spu_prio->runq[prio])) + clear_bit(prio, spu_prio->bitmap); } static void spu_prio_wait(struct spu_context *ctx) { DEFINE_WAIT(wait); + spin_lock(&spu_prio->runq_lock); prepare_to_wait_exclusive(&ctx->stop_wq, &wait, TASK_INTERRUPTIBLE); if (!signal_pending(current)) { + __spu_add_to_rq(ctx); + spin_unlock(&spu_prio->runq_lock); mutex_unlock(&ctx->state_mutex); schedule(); mutex_lock(&ctx->state_mutex); + spin_lock(&spu_prio->runq_lock); + __spu_del_from_rq(ctx); } + spin_unlock(&spu_prio->runq_lock); __set_current_state(TASK_RUNNING); remove_wait_queue(&ctx->stop_wq, &wait); } @@ -280,9 +290,14 @@ static void spu_reschedule(struct spu *spu) spin_lock(&spu_prio->runq_lock); best = sched_find_first_bit(spu_prio->bitmap); if (best < MAX_PRIO) { - struct spu_context *ctx = spu_grab_context(best); - if (ctx) - wake_up(&ctx->stop_wq); + struct list_head *rq = &spu_prio->runq[best]; + struct spu_context *ctx; + + BUG_ON(list_empty(rq)); + + ctx = list_entry(rq->next, struct spu_context, rq); + __spu_del_from_rq(ctx); + wake_up(&ctx->stop_wq); } spin_unlock(&spu_prio->runq_lock); } @@ -365,6 +380,12 @@ static struct spu *find_victim(struct spu_context *ctx) } spu_unbind_context(spu, victim); mutex_unlock(&victim->state_mutex); + /* + * We need to break out of the wait loop in spu_run + * manually to ensure this context gets put on the + * runqueue again ASAP. + */ + wake_up(&victim->stop_wq); return spu; } } @@ -377,7 +398,7 @@ static struct spu *find_victim(struct spu_context *ctx) * @ctx: spu context to schedule * @flags: flags (currently ignored) * - * Tries to find a free spu to run @ctx. If no free spu is availble + * Tries to find a free spu to run @ctx. If no free spu is available * add the context to the runqueue so it gets woken up once an spu * is available. */ @@ -402,9 +423,7 @@ int spu_activate(struct spu_context *ctx, unsigned long flags) return 0; } - spu_add_to_rq(ctx); spu_prio_wait(ctx); - spu_del_from_rq(ctx); } while (!signal_pending(current)); return -ERESTARTSYS; @@ -438,7 +457,6 @@ void spu_deactivate(struct spu_context *ctx) void spu_yield(struct spu_context *ctx) { struct spu *spu; - int need_yield = 0; if (mutex_trylock(&ctx->state_mutex)) { if ((spu = ctx->spu) != NULL) { @@ -447,13 +465,10 @@ void spu_yield(struct spu_context *ctx) pr_debug("%s: yielding SPU %d NODE %d\n", __FUNCTION__, spu->number, spu->node); spu_deactivate(ctx); - need_yield = 1; } } mutex_unlock(&ctx->state_mutex); } - if (unlikely(need_yield)) - yield(); } int __init spu_sched_init(void) diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index 5c4e47d69d79..0a947fd7de57 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -41,7 +41,7 @@ struct spu_gang; /* ctx->sched_flags */ enum { - SPU_SCHED_WAKE = 0, /* currently unused */ + SPU_SCHED_EXITING = 0, }; struct spu_context { @@ -50,16 +50,17 @@ struct spu_context { spinlock_t mmio_lock; /* protects mmio access */ struct address_space *local_store; /* local store mapping. */ struct address_space *mfc; /* 'mfc' area mappings. */ - struct address_space *cntl; /* 'control' area mappings. */ - struct address_space *signal1; /* 'signal1' area mappings. */ - struct address_space *signal2; /* 'signal2' area mappings. */ - struct address_space *mss; /* 'mss' area mappings. */ - struct address_space *psmap; /* 'psmap' area mappings. */ + struct address_space *cntl; /* 'control' area mappings. */ + struct address_space *signal1; /* 'signal1' area mappings. */ + struct address_space *signal2; /* 'signal2' area mappings. */ + struct address_space *mss; /* 'mss' area mappings. */ + struct address_space *psmap; /* 'psmap' area mappings. */ + spinlock_t mapping_lock; u64 object_id; /* user space pointer for oprofile */ enum { SPU_STATE_RUNNABLE, SPU_STATE_SAVED } state; struct mutex state_mutex; - struct semaphore run_sema; + struct mutex run_mutex; struct mm_struct *owner; @@ -140,6 +141,7 @@ struct spu_context_ops { struct spu_dma_info * info); void (*proxydma_info_read) (struct spu_context * ctx, struct spu_proxydma_info * info); + void (*restart_dma)(struct spu_context *ctx); }; extern struct spu_context_ops spu_hw_ops; @@ -149,6 +151,7 @@ struct spufs_inode_info { struct spu_context *i_ctx; struct spu_gang *i_gang; struct inode vfs_inode; + int i_openers; }; #define SPUFS_I(inode) \ container_of(inode, struct spufs_inode_info, vfs_inode) @@ -170,6 +173,9 @@ int put_spu_gang(struct spu_gang *gang); void spu_gang_remove_ctx(struct spu_gang *gang, struct spu_context *ctx); void spu_gang_add_ctx(struct spu_gang *gang, struct spu_context *ctx); +/* fault handling */ +int spufs_handle_class1(struct spu_context *ctx); + /* context management */ static inline void spu_acquire(struct spu_context *ctx) { @@ -190,7 +196,6 @@ void spu_unmap_mappings(struct spu_context *ctx); void spu_forget(struct spu_context *ctx); int spu_acquire_runnable(struct spu_context *ctx, unsigned long flags); void spu_acquire_saved(struct spu_context *ctx); -int spu_acquire_exclusive(struct spu_context *ctx); int spu_activate(struct spu_context *ctx, unsigned long flags); void spu_deactivate(struct spu_context *ctx); @@ -218,14 +223,13 @@ extern char *isolated_loader; prepare_to_wait(&(wq), &__wait, TASK_INTERRUPTIBLE); \ if (condition) \ break; \ - if (!signal_pending(current)) { \ - spu_release(ctx); \ - schedule(); \ - spu_acquire(ctx); \ - continue; \ + if (signal_pending(current)) { \ + __ret = -ERESTARTSYS; \ + break; \ } \ - __ret = -ERESTARTSYS; \ - break; \ + spu_release(ctx); \ + schedule(); \ + spu_acquire(ctx); \ } \ finish_wait(&(wq), &__wait); \ __ret; \ diff --git a/arch/powerpc/platforms/cell/spufs/switch.c b/arch/powerpc/platforms/cell/spufs/switch.c index fd91c73de34e..8347c4a3f894 100644 --- a/arch/powerpc/platforms/cell/spufs/switch.c +++ b/arch/powerpc/platforms/cell/spufs/switch.c @@ -2084,6 +2084,10 @@ int spu_save(struct spu_state *prev, struct spu *spu) int rc; acquire_spu_lock(spu); /* Step 1. */ + prev->dar = spu->dar; + prev->dsisr = spu->dsisr; + spu->dar = 0; + spu->dsisr = 0; rc = __do_spu_save(prev, spu); /* Steps 2-53. */ release_spu_lock(spu); if (rc != 0 && rc != 2 && rc != 6) { @@ -2109,9 +2113,9 @@ int spu_restore(struct spu_state *new, struct spu *spu) acquire_spu_lock(spu); harvest(NULL, spu); - spu->dar = 0; - spu->dsisr = 0; spu->slb_replace = 0; + new->dar = 0; + new->dsisr = 0; spu->class_0_pending = 0; rc = __do_spu_restore(new, spu); release_spu_lock(spu); diff --git a/arch/powerpc/platforms/celleb/Kconfig b/arch/powerpc/platforms/celleb/Kconfig new file mode 100644 index 000000000000..2db1e293433e --- /dev/null +++ b/arch/powerpc/platforms/celleb/Kconfig @@ -0,0 +1,9 @@ +config PPC_CELLEB + bool "Toshiba's Cell Reference Set 'Celleb' Architecture" + depends on PPC_MULTIPLATFORM && PPC64 + select PPC_CELL + select PPC_OF_PLATFORM_PCI + select HAS_TXX9_SERIAL + select PPC_UDBG_BEAT + select USB_OHCI_BIG_ENDIAN_MMIO + select USB_EHCI_BIG_ENDIAN_MMIO diff --git a/arch/powerpc/platforms/celleb/iommu.c b/arch/powerpc/platforms/celleb/iommu.c index f63b94c65353..755d869d8553 100644 --- a/arch/powerpc/platforms/celleb/iommu.c +++ b/arch/powerpc/platforms/celleb/iommu.c @@ -37,7 +37,7 @@ static int __init find_dma_window(u64 *io_space_id, u64 *ioid, const unsigned long *dma_window; for_each_node_by_type(dn, "ioif") { - dma_window = get_property(dn, "toshiba,dma-window", NULL); + dma_window = of_get_property(dn, "toshiba,dma-window", NULL); if (dma_window) { *io_space_id = (dma_window[0] >> 32) & 0xffffffffUL; *ioid = dma_window[0] & 0x7ffUL; @@ -80,7 +80,7 @@ static int celleb_of_bus_notify(struct notifier_block *nb, if (action != BUS_NOTIFY_ADD_DEVICE) return 0; - dev->archdata.dma_ops = pci_dma_ops; + dev->archdata.dma_ops = get_pci_dma_ops(); return 0; } @@ -95,7 +95,7 @@ static int __init celleb_init_iommu(void) return -ENODEV; celleb_init_direct_mapping(); - pci_dma_ops = &dma_direct_ops; + set_pci_dma_ops(&dma_direct_ops); bus_register_notifier(&of_platform_bus_type, &celleb_of_bus_notifier); return 0; diff --git a/arch/powerpc/platforms/celleb/pci.c b/arch/powerpc/platforms/celleb/pci.c index 98de836dfed3..d1adf34cd5e8 100644 --- a/arch/powerpc/platforms/celleb/pci.c +++ b/arch/powerpc/platforms/celleb/pci.c @@ -309,13 +309,13 @@ static int __devinit celleb_setup_fake_pci_device(struct device_node *node, goto error; } - name = get_property(node, "model", &rlen); + name = of_get_property(node, "model", &rlen); if (!name) { printk(KERN_ERR "PCI: model property not found.\n"); goto error; } - wi4 = get_property(node, "reg", &rlen); + wi4 = of_get_property(node, "reg", &rlen); if (wi4 == NULL) goto error; @@ -352,10 +352,10 @@ static int __devinit celleb_setup_fake_pci_device(struct device_node *node, } pr_debug("PCI: res assigned 0x%016lx\n", (unsigned long)*res); - wi0 = get_property(node, "device-id", NULL); - wi1 = get_property(node, "vendor-id", NULL); - wi2 = get_property(node, "class-code", NULL); - wi3 = get_property(node, "revision-id", NULL); + wi0 = of_get_property(node, "device-id", NULL); + wi1 = of_get_property(node, "vendor-id", NULL); + wi2 = of_get_property(node, "class-code", NULL); + wi3 = of_get_property(node, "revision-id", NULL); celleb_config_write_fake(*config, PCI_DEVICE_ID, 2, wi0[0] & 0xffff); celleb_config_write_fake(*config, PCI_VENDOR_ID, 2, wi1[0] & 0xffff); @@ -376,7 +376,7 @@ static int __devinit celleb_setup_fake_pci_device(struct device_node *node, celleb_setup_pci_base_addrs(hose, devno, fn, num_base_addr); - li = get_property(node, "interrupts", &rlen); + li = of_get_property(node, "interrupts", &rlen); val = li[0]; celleb_config_write_fake(*config, PCI_INTERRUPT_PIN, 1, 1); celleb_config_write_fake(*config, PCI_INTERRUPT_LINE, 1, val); @@ -424,7 +424,7 @@ static int __devinit phb_set_bus_ranges(struct device_node *dev, const int *bus_range; unsigned int len; - bus_range = get_property(dev, "bus-range", &len); + bus_range = of_get_property(dev, "bus-range", &len); if (bus_range == NULL || len < 2 * sizeof(int)) return 1; @@ -451,7 +451,7 @@ int __devinit celleb_setup_phb(struct pci_controller *phb) struct device_node *node; unsigned int rlen; - name = get_property(dev, "name", &rlen); + name = of_get_property(dev, "name", &rlen); if (!name) return 1; diff --git a/arch/powerpc/platforms/celleb/setup.c b/arch/powerpc/platforms/celleb/setup.c index 5f4d0d933238..596ab2a788d4 100644 --- a/arch/powerpc/platforms/celleb/setup.c +++ b/arch/powerpc/platforms/celleb/setup.c @@ -67,7 +67,7 @@ static void celleb_show_cpuinfo(struct seq_file *m) root = of_find_node_by_path("/"); if (root) - model = get_property(root, "model", NULL); + model = of_get_property(root, "model", NULL); /* using "CHRP" is to trick anaconda into installing FCx into Celleb */ seq_printf(m, "machine\t\t: %s %s\n", celleb_machine_type, model); of_node_put(root); @@ -128,15 +128,6 @@ static int __init celleb_probe(void) return 1; } -/* - * Cell has no legacy IO; anything calling this function has to - * fail or bad things will happen - */ -static int celleb_check_legacy_ioport(unsigned int baseport) -{ - return -ENODEV; -} - #ifdef CONFIG_KEXEC static void celleb_kexec_cpu_down(int crash, int secondary) { @@ -173,7 +164,6 @@ define_machine(celleb) { .get_rtc_time = beat_get_rtc_time, .set_rtc_time = beat_set_rtc_time, .calibrate_decr = generic_calibrate_decr, - .check_legacy_ioport = celleb_check_legacy_ioport, .progress = celleb_progress, .power_save = beat_power_save, .nvram_size = beat_nvram_get_size, diff --git a/arch/powerpc/platforms/chrp/Kconfig b/arch/powerpc/platforms/chrp/Kconfig new file mode 100644 index 000000000000..d2c690531963 --- /dev/null +++ b/arch/powerpc/platforms/chrp/Kconfig @@ -0,0 +1,11 @@ +config PPC_CHRP + bool "Common Hardware Reference Platform (CHRP) based machines" + depends on PPC_MULTIPLATFORM && PPC32 + select MPIC + select PPC_I8259 + select PPC_INDIRECT_PCI + select PPC_RTAS + select PPC_MPC106 + select PPC_UDBG_16550 + select PPC_NATIVE + default y diff --git a/arch/powerpc/platforms/chrp/nvram.c b/arch/powerpc/platforms/chrp/nvram.c index 0dd4a64757d9..8efd4244701c 100644 --- a/arch/powerpc/platforms/chrp/nvram.c +++ b/arch/powerpc/platforms/chrp/nvram.c @@ -74,7 +74,7 @@ void __init chrp_nvram_init(void) if (nvram == NULL) return; - nbytes_p = get_property(nvram, "#bytes", &proplen); + nbytes_p = of_get_property(nvram, "#bytes", &proplen); if (nbytes_p == NULL || proplen != sizeof(unsigned int)) return; diff --git a/arch/powerpc/platforms/chrp/pci.c b/arch/powerpc/platforms/chrp/pci.c index ddb4a116ea89..1469d6478f67 100644 --- a/arch/powerpc/platforms/chrp/pci.c +++ b/arch/powerpc/platforms/chrp/pci.c @@ -7,7 +7,6 @@ #include <linux/delay.h> #include <linux/string.h> #include <linux/init.h> -#include <linux/ide.h> #include <asm/io.h> #include <asm/pgtable.h> @@ -137,9 +136,11 @@ hydra_init(void) struct device_node *np; struct resource r; - np = find_devices("mac-io"); - if (np == NULL || of_address_to_resource(np, 0, &r)) + np = of_find_node_by_name(NULL, "mac-io"); + if (np == NULL || of_address_to_resource(np, 0, &r)) { + of_node_put(np); return 0; + } Hydra = ioremap(r.start, r.end-r.start); printk("Hydra Mac I/O at %llx\n", (unsigned long long)r.start); printk("Hydra Feature_Control was %x", @@ -186,10 +187,9 @@ setup_python(struct pci_controller *hose, struct device_node *dev) /* Marvell Discovery II based Pegasos 2 */ static void __init setup_peg2(struct pci_controller *hose, struct device_node *dev) { - struct device_node *root = find_path_device("/"); + struct device_node *root = of_find_node_by_path("/"); struct device_node *rtas; - of_node_get(root); rtas = of_find_node_by_name (root, "rtas"); if (rtas) { hose->ops = &rtas_pci_ops; @@ -199,6 +199,7 @@ static void __init setup_peg2(struct pci_controller *hose, struct device_node *d " your firmware\n"); } pci_assign_all_buses = 1; + /* keep the reference to the root node */ } void __init @@ -211,14 +212,14 @@ chrp_find_bridges(void) const unsigned int *dma; const char *model, *machine; int is_longtrail = 0, is_mot = 0, is_pegasos = 0; - struct device_node *root = find_path_device("/"); + struct device_node *root = of_find_node_by_path("/"); struct resource r; /* * The PCI host bridge nodes on some machines don't have * properties to adequately identify them, so we have to * look at what sort of machine this is as well. */ - machine = get_property(root, "model", NULL); + machine = of_get_property(root, "model", NULL); if (machine != NULL) { is_longtrail = strncmp(machine, "IBM,LongTrail", 13) == 0; is_mot = strncmp(machine, "MOT", 3) == 0; @@ -237,7 +238,7 @@ chrp_find_bridges(void) dev->full_name); continue; } - bus_range = get_property(dev, "bus-range", &len); + bus_range = of_get_property(dev, "bus-range", &len); if (bus_range == NULL || len < 2 * sizeof(int)) { printk(KERN_WARNING "Can't get bus-range for %s\n", dev->full_name); @@ -263,7 +264,7 @@ chrp_find_bridges(void) hose->first_busno = bus_range[0]; hose->last_busno = bus_range[1]; - model = get_property(dev, "model", NULL); + model = of_get_property(dev, "model", NULL); if (model == NULL) model = "<none>"; if (device_is_compatible(dev, "IBM,python")) { @@ -285,7 +286,8 @@ chrp_find_bridges(void) r.start + 0x000f8000, r.start + 0x000f8010); if (index == 0) { - dma = get_property(dev, "system-dma-base",&len); + dma = of_get_property(dev, "system-dma-base", + &len); if (dma && len >= sizeof(*dma)) { dma = (unsigned int *) (((unsigned long)dma) + @@ -303,12 +305,13 @@ chrp_find_bridges(void) /* check the first bridge for a property that we can use to set pci_dram_offset */ - dma = get_property(dev, "ibm,dma-ranges", &len); + dma = of_get_property(dev, "ibm,dma-ranges", &len); if (index == 0 && dma != NULL && len >= 6 * sizeof(*dma)) { pci_dram_offset = dma[2] - dma[3]; printk("pci_dram_offset = %lx\n", pci_dram_offset); } } + of_node_put(root); } /* SL82C105 IDE Control/Status Register */ diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c index 117c9a0055bd..1870038a8e0a 100644 --- a/arch/powerpc/platforms/chrp/setup.c +++ b/arch/powerpc/platforms/chrp/setup.c @@ -28,7 +28,6 @@ #include <linux/adb.h> #include <linux/module.h> #include <linux/delay.h> -#include <linux/ide.h> #include <linux/console.h> #include <linux/seq_file.h> #include <linux/root_dev.h> @@ -111,9 +110,9 @@ void chrp_show_cpuinfo(struct seq_file *m) struct device_node *root; const char *model = ""; - root = find_path_device("/"); + root = of_find_node_by_path("/"); if (root) - model = get_property(root, "model", NULL); + model = of_get_property(root, "model", NULL); seq_printf(m, "machine\t\t: CHRP %s\n", model); /* longtrail (goldengate) stuff */ @@ -161,6 +160,7 @@ void chrp_show_cpuinfo(struct seq_file *m) gg2_cachetypes[(t>>2) & 3], gg2_cachemodes[t & 3]); } + of_node_put(root); } /* @@ -205,13 +205,15 @@ static void __init sio_init(void) { struct device_node *root; - if ((root = find_path_device("/")) && - !strncmp(get_property(root, "model", NULL), "IBM,LongTrail", 13)) { + if ((root = of_find_node_by_path("/")) && + !strncmp(of_get_property(root, "model", NULL), + "IBM,LongTrail", 13)) { /* logical device 0 (KBC/Keyboard) */ sio_fixup_irq("keyboard", 0, 1, 2); /* select logical device 1 (KBC/Mouse) */ sio_fixup_irq("mouse", 1, 12, 2); } + of_node_put(root); } @@ -224,12 +226,12 @@ static void __init pegasos_set_l2cr(void) return; /* Enable L2 cache if needed */ - np = find_type_devices("cpu"); + np = of_find_node_by_type(NULL, "cpu"); if (np != NULL) { - const unsigned int *l2cr = get_property(np, "l2cr", NULL); + const unsigned int *l2cr = of_get_property(np, "l2cr", NULL); if (l2cr == NULL) { printk ("Pegasos l2cr : no cpu l2cr property found\n"); - return; + goto out; } if (!((*l2cr) & 0x80000000)) { printk ("Pegasos l2cr : L2 cache was not active, " @@ -238,6 +240,8 @@ static void __init pegasos_set_l2cr(void) _set_L2CR((*l2cr) | 0x80000000); } } +out: + of_node_put(np); } static void briq_restart(char *cmd) @@ -250,14 +254,14 @@ static void briq_restart(char *cmd) void __init chrp_setup_arch(void) { - struct device_node *root = find_path_device ("/"); + struct device_node *root = of_find_node_by_path("/"); const char *machine = NULL; /* init to some ~sane value until calibrate_delay() runs */ loops_per_jiffy = 50000000/HZ; if (root) - machine = get_property(root, "model", NULL); + machine = of_get_property(root, "model", NULL); if (machine && strncmp(machine, "Pegasos", 7) == 0) { _chrp_type = _CHRP_Pegasos; } else if (machine && strncmp(machine, "IBM", 3) == 0) { @@ -273,6 +277,7 @@ void __init chrp_setup_arch(void) /* Let's assume it is an IBM chrp if all else fails */ _chrp_type = _CHRP_IBM; } + of_node_put(root); printk("chrp type = %x [%s]\n", _chrp_type, chrp_names[_chrp_type]); rtas_initialize(); @@ -361,8 +366,8 @@ static void __init chrp_find_openpic(void) return; root = of_find_node_by_path("/"); if (root) { - opprop = get_property(root, "platform-open-pic", &oplen); - na = prom_n_addr_cells(root); + opprop = of_get_property(root, "platform-open-pic", &oplen); + na = of_n_addr_cells(root); } if (opprop && oplen >= na * sizeof(unsigned int)) { opaddr = opprop[na-1]; /* assume 32-bit */ @@ -378,7 +383,7 @@ static void __init chrp_find_openpic(void) printk(KERN_INFO "OpenPIC at %lx\n", opaddr); - iranges = get_property(np, "interrupt-ranges", &len); + iranges = of_get_property(np, "interrupt-ranges", &len); if (iranges == NULL) len = 0; /* non-distributed mpic */ else @@ -427,7 +432,7 @@ static void __init chrp_find_openpic(void) of_node_put(np); } -#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON) +#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_XMON) static struct irqaction xmon_irqaction = { .handler = xmon_irq, .mask = CPU_MASK_NONE, @@ -463,15 +468,16 @@ static void __init chrp_find_8259(void) * Also, Pegasos-type platforms don't have a proper node to start * from anyway */ - for (np = find_devices("pci"); np != NULL; np = np->next) { - const unsigned int *addrp = get_property(np, + for_each_node_by_name(np, "pci") { + const unsigned int *addrp = of_get_property(np, "8259-interrupt-acknowledge", NULL); if (addrp == NULL) continue; - chrp_int_ack = addrp[prom_n_addr_cells(np)-1]; + chrp_int_ack = addrp[of_n_addr_cells(np)-1]; break; } + of_node_put(np); if (np == NULL) printk(KERN_WARNING "Cannot find PCI interrupt acknowledge" " address, polling\n"); @@ -493,7 +499,7 @@ static void __init chrp_find_8259(void) void __init chrp_init_IRQ(void) { -#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON) +#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_XMON) struct device_node *kbd; #endif chrp_find_openpic(); @@ -510,13 +516,14 @@ void __init chrp_init_IRQ(void) if (_chrp_type == _CHRP_Pegasos) ppc_md.get_irq = i8259_irq; -#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(XMON) +#if defined(CONFIG_VT) && defined(CONFIG_INPUT_ADBHID) && defined(CONFIG_XMON) /* see if there is a keyboard in the device tree with a parent of type "adb" */ - for (kbd = find_devices("keyboard"); kbd; kbd = kbd->next) + for_each_node_by_name(kbd, "keyboard") if (kbd->parent && kbd->parent->type && strcmp(kbd->parent->type, "adb") == 0) break; + of_node_put(kbd); if (kbd) setup_irq(HYDRA_INT_ADB_NMI, &xmon_irqaction); #endif @@ -542,9 +549,9 @@ chrp_init2(void) /* Get the event scan rate for the rtas so we know how * often it expects a heartbeat. -- Cort */ - device = find_devices("rtas"); + device = of_find_node_by_name(NULL, "rtas"); if (device) - p = get_property(device, "rtas-event-scan-rate", NULL); + p = of_get_property(device, "rtas-event-scan-rate", NULL); if (p && *p) { /* * Arrange to call chrp_event_scan at least *p times @@ -571,6 +578,7 @@ chrp_init2(void) printk("RTAS Event Scan Rate: %u (%lu jiffies)\n", *p, interval); } + of_node_put(device); if (ppc_md.progress) ppc_md.progress(" Have fun! ", 0x7777); diff --git a/arch/powerpc/platforms/chrp/time.c b/arch/powerpc/platforms/chrp/time.c index 7d7889026936..96d1e4b3c493 100644 --- a/arch/powerpc/platforms/chrp/time.c +++ b/arch/powerpc/platforms/chrp/time.c @@ -39,12 +39,17 @@ long __init chrp_time_init(void) struct resource r; int base; - rtcs = find_compatible_devices("rtc", "pnpPNP,b00"); + rtcs = of_find_compatible_node(NULL, "rtc", "pnpPNP,b00"); if (rtcs == NULL) - rtcs = find_compatible_devices("rtc", "ds1385-rtc"); - if (rtcs == NULL || of_address_to_resource(rtcs, 0, &r)) + rtcs = of_find_compatible_node(NULL, "rtc", "ds1385-rtc"); + if (rtcs == NULL) + return 0; + if (of_address_to_resource(rtcs, 0, &r)) { + of_node_put(rtcs); return 0; - + } + of_node_put(rtcs); + base = r.start; nvram_as1 = 0; nvram_as0 = base; diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig index 3410bcbc9dbe..9557908ef545 100644 --- a/arch/powerpc/platforms/embedded6xx/Kconfig +++ b/arch/powerpc/platforms/embedded6xx/Kconfig @@ -2,78 +2,6 @@ choice prompt "Machine Type" depends on EMBEDDED6xx -config KATANA - bool "Artesyn-Katana" - help - Select KATANA if configuring an Artesyn KATANA 750i or 3750 - cPCI board. - -config WILLOW - bool "Cogent-Willow" - -config CPCI690 - bool "Force-CPCI690" - help - Select CPCI690 if configuring a Force CPCI690 cPCI board. - -config POWERPMC250 - bool "Force-PowerPMC250" - -config CHESTNUT - bool "IBM 750FX Eval board or 750GX Eval board" - help - Select CHESTNUT if configuring an IBM 750FX Eval Board or a - IBM 750GX Eval board. - -config SPRUCE - bool "IBM-Spruce" - select PPC_INDIRECT_PCI - -config HDPU - bool "Sky-HDPU" - help - Select HDPU if configuring a Sky Computers Compute Blade. - -config HDPU_FEATURES - depends on HDPU - tristate "HDPU-Features" - help - Select to enable HDPU enhanced features. - -config EV64260 - bool "Marvell-EV64260BP" - help - Select EV64260 if configuring a Marvell (formerly Galileo) - EV64260BP Evaluation platform. - -config LOPEC - bool "Motorola-LoPEC" - select PPC_I8259 - -config MVME5100 - bool "Motorola-MVME5100" - select PPC_INDIRECT_PCI - -config PPLUS - bool "Motorola-PowerPlus" - select PPC_I8259 - select PPC_INDIRECT_PCI - -config PRPMC750 - bool "Motorola-PrPMC750" - select PPC_INDIRECT_PCI - -config PRPMC800 - bool "Motorola-PrPMC800" - select PPC_INDIRECT_PCI - -config SANDPOINT - bool "Motorola-Sandpoint" - select PPC_I8259 - help - Select SANDPOINT if configuring for a Motorola Sandpoint X3 - (any flavor). - config LINKSTATION bool "Linkstation / Kurobox(HG) from Buffalo" select MPIC @@ -97,212 +25,24 @@ config MPC7448HPC2 help Select MPC7448HPC2 if configuring for Freescale MPC7448HPC2 (Taiga) platform - -config RADSTONE_PPC7D - bool "Radstone Technology PPC7D board" - select PPC_I8259 - -config PAL4 - bool "SBS-Palomar4" - -config EST8260 - bool "EST8260" - ---help--- - The EST8260 is a single-board computer manufactured by Wind River - Systems, Inc. (formerly Embedded Support Tools Corp.) and based on - the MPC8260. Wind River Systems has a website at - <http://www.windriver.com/>, but the EST8260 cannot be found on it - and has probably been discontinued or rebadged. - -config SBC82xx - bool "SBC82xx" - ---help--- - SBC PowerQUICC II, single-board computer with MPC82xx CPU - Manufacturer: Wind River Systems, Inc. - Date of Release: May 2003 - End of Life: - - URL: <http://www.windriver.com/> - -config SBS8260 - bool "SBS8260" - -config RPX8260 - bool "RPXSUPER" - -config TQM8260 - bool "TQM8260" - ---help--- - MPC8260 based module, little larger than credit card, - up to 128 MB global + 64 MB local RAM, 32 MB Flash, - 32 kB EEPROM, 256 kB L@ Cache, 10baseT + 100baseT Ethernet, - 2 x serial ports, ... - Manufacturer: TQ Components, www.tq-group.de - Date of Release: June 2001 - End of Life: not yet :-) - URL: <http://www.denx.de/PDF/TQM82xx_SPEC_Rev005.pdf> - -config ADS8272 - bool "ADS8272" - -config PQ2FADS - bool "Freescale-PQ2FADS" - help - Select PQ2FADS if you wish to configure for a Freescale - PQ2FADS board (-VR or -ZU). - -config EV64360 - bool "Marvell-EV64360BP" - help - Select EV64360 if configuring a Marvell EV64360BP Evaluation - platform. endchoice -config PQ2ADS - bool - depends on ADS8272 - default y - -config TQM8xxL - bool - depends on 8xx && (TQM823L || TQM850L || FPS850L || TQM855L || TQM860L) - default y - -config 8260 - bool "CPM2 Support" if WILLOW - depends on 6xx - default y if TQM8260 || RPX8260 || EST8260 || SBS8260 || SBC82xx || PQ2FADS - help - The MPC8260 is a typical embedded CPU made by Motorola. Selecting - this option means that you wish to build a kernel for a machine with - an 8260 class CPU. - -config 8272 - bool - depends on 6xx - default y if ADS8272 - select 8260 - help - The MPC8272 CPM has a different internal dpram setup than other CPM2 - devices - -config CPM2 - bool - depends on 8260 || MPC8560 || MPC8555 - default y - help - The CPM2 (Communications Processor Module) is a coprocessor on - embedded CPUs made by Motorola. Selecting this option means that - you wish to build a kernel for a machine with a CPM2 coprocessor - on it (826x, 827x, 8560). - -config PPC_GEN550 - bool - depends on SANDPOINT || SPRUCE || PPLUS || \ - PRPMC750 || PRPMC800 || LOPEC || \ - (EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D || \ - 83xx || LINKSTATION - default y - -config FORCE - bool - depends on 6xx && POWERPMC250 - default y - -config GT64260 - bool - depends on EV64260 || CPCI690 - default y - -config MV64360 # Really MV64360 & MV64460 - bool - depends on CHESTNUT || KATANA || RADSTONE_PPC7D || HDPU || EV64360 - default y - -config MV64X60 - bool - depends on (GT64260 || MV64360) - select PPC_INDIRECT_PCI - default y - config TSI108_BRIDGE bool depends on MPC7448HPC2 default y -menu "Set bridge options" - depends on MV64X60 - -config NOT_COHERENT_CACHE - bool "Turn off Cache Coherency" - default n - help - Some 64x60 bridges lock up when trying to enforce cache coherency. - When this option is selected, cache coherency will be turned off. - Note that this can cause other problems (e.g., stale data being - speculatively loaded via a cached mapping). Use at your own risk. - -config MV64X60_BASE - hex "Set bridge base used by firmware" - default "0xf1000000" - help - A firmware can leave the base address of the bridge's registers at - a non-standard location. If so, set this value to reflect the - address of that non-standard location. - -config MV64X60_NEW_BASE - hex "Set bridge base used by kernel" - default "0xf1000000" - help - If the current base address of the bridge's registers is not where - you want it, set this value to the address that you want it moved to. - -endmenu - -config NONMONARCH_SUPPORT - bool "Enable Non-Monarch Support" - depends on PRPMC800 - -config HARRIER - bool - depends on PRPMC800 - default y - -config EPIC_SERIAL_MODE - bool - depends on 6xx && (LOPEC || SANDPOINT) - default y - config MPC10X_BRIDGE bool - depends on POWERPMC250 || LOPEC || SANDPOINT || LINKSTATION + depends on LINKSTATION select PPC_INDIRECT_PCI default y config MPC10X_OPENPIC bool - depends on POWERPMC250 || LOPEC || SANDPOINT || LINKSTATION + depends on LINKSTATION default y config MPC10X_STORE_GATHERING bool "Enable MPC10x store gathering" depends on MPC10X_BRIDGE - -config SANDPOINT_ENABLE_UART1 - bool "Enable DUART mode on Sandpoint" - depends on SANDPOINT - help - If this option is enabled then the MPC824x processor will run - in DUART mode instead of UART mode. - -config HARRIER_STORE_GATHERING - bool "Enable Harrier store gathering" - depends on HARRIER - -config MVME5100_IPMC761_PRESENT - bool "MVME5100 configured with an IPMC761" - depends on MVME5100 - select PPC_I8259 - -config SPRUCE_BAUD_33M - bool "Spruce baud clock support" - depends on SPRUCE diff --git a/arch/powerpc/platforms/embedded6xx/linkstation.c b/arch/powerpc/platforms/embedded6xx/linkstation.c index 3f6c4114f908..b412f006a9c5 100644 --- a/arch/powerpc/platforms/embedded6xx/linkstation.c +++ b/arch/powerpc/platforms/embedded6xx/linkstation.c @@ -58,11 +58,11 @@ static int __init add_bridge(struct device_node *dev) { int len; struct pci_controller *hose; - int *bus_range; + const int *bus_range; printk("Adding PCI host bridge %s\n", dev->full_name); - bus_range = (int *) get_property(dev, "bus-range", &len); + bus_range = of_get_property(dev, "bus-range", &len); if (bus_range == NULL || len < 2 * sizeof(int)) printk(KERN_WARNING "Can't get bus-range for %s, assume" " bus 0\n", dev->full_name); @@ -106,7 +106,7 @@ static void __init linkstation_init_IRQ(void) { struct mpic *mpic; struct device_node *dnp; - void *prop; + const u32 *prop; int size; phys_addr_t paddr; @@ -114,7 +114,7 @@ static void __init linkstation_init_IRQ(void) if (dnp == NULL) return; - prop = (struct device_node *)get_property(dnp, "reg", &size); + prop = of_get_property(dnp, "reg", &size); paddr = (phys_addr_t)of_translate_address(dnp, prop); mpic = mpic_alloc(dnp, paddr, MPIC_PRIMARY | MPIC_WANTS_RESET, 4, 32, " EPIC "); diff --git a/arch/powerpc/platforms/embedded6xx/ls_uart.c b/arch/powerpc/platforms/embedded6xx/ls_uart.c index 0e837762cc5b..d0bee9f19e4e 100644 --- a/arch/powerpc/platforms/embedded6xx/ls_uart.c +++ b/arch/powerpc/platforms/embedded6xx/ls_uart.c @@ -110,8 +110,8 @@ static int __init ls_uarts_init(void) if (!avr) return -EINVAL; - avr_clock = *(u32*)get_property(avr, "clock-frequency", &len); - phys_addr = ((u32*)get_property(avr, "reg", &len))[0]; + avr_clock = *(u32*)of_get_property(avr, "clock-frequency", &len); + phys_addr = ((u32*)of_get_property(avr, "reg", &len))[0]; if (!avr_clock || !phys_addr) return -EINVAL; diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c index 3fcc85f60fbf..c3f64ddb0be6 100644 --- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c +++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c @@ -25,7 +25,6 @@ #include <linux/console.h> #include <linux/delay.h> #include <linux/irq.h> -#include <linux/ide.h> #include <linux/seq_file.h> #include <linux/root_dev.h> #include <linux/serial.h> @@ -82,7 +81,7 @@ static void __init mpc7448_hpc2_setup_arch(void) if (cpu != 0) { const unsigned int *fp; - fp = get_property(cpu, "clock-frequency", NULL); + fp = of_get_property(cpu, "clock-frequency", NULL); if (fp != 0) loops_per_jiffy = *fp / HZ; else @@ -91,16 +90,6 @@ static void __init mpc7448_hpc2_setup_arch(void) } tsi108_csr_vir_base = get_vir_csrbase(); -#ifdef CONFIG_ROOT_NFS - ROOT_DEV = Root_NFS; -#else - ROOT_DEV = Root_HDA1; -#endif - -#ifdef CONFIG_BLK_DEV_INITRD - ROOT_DEV = Root_RAM0; -#endif - /* setup PCI host bridge */ #ifdef CONFIG_PCI for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;) @@ -143,7 +132,7 @@ static void __init mpc7448_hpc2_init_IRQ(void) tsi_pic = of_find_node_by_type(NULL, "open-pic"); if (tsi_pic) { unsigned int size; - const void *prop = get_property(tsi_pic, "reg", &size); + const void *prop = of_get_property(tsi_pic, "reg", &size); mpic_paddr = of_translate_address(tsi_pic, prop); } diff --git a/arch/powerpc/platforms/iseries/Kconfig b/arch/powerpc/platforms/iseries/Kconfig index 54e6b3b6f261..46c3a8e7c3a8 100644 --- a/arch/powerpc/platforms/iseries/Kconfig +++ b/arch/powerpc/platforms/iseries/Kconfig @@ -1,3 +1,7 @@ +config PPC_ISERIES + bool "IBM Legacy iSeries" + depends on PPC_MULTIPLATFORM && PPC64 + select PPC_INDIRECT_IO menu "iSeries device drivers" depends on PPC_ISERIES diff --git a/arch/powerpc/platforms/iseries/iommu.c b/arch/powerpc/platforms/iseries/iommu.c index d7a756d5135c..3b6a9666c2c0 100644 --- a/arch/powerpc/platforms/iseries/iommu.c +++ b/arch/powerpc/platforms/iseries/iommu.c @@ -171,7 +171,7 @@ void iommu_devnode_init_iSeries(struct pci_dev *pdev, struct device_node *dn) { struct iommu_table *tbl; struct pci_dn *pdn = PCI_DN(dn); - const u32 *lsn = get_property(dn, "linux,logical-slot-number", NULL); + const u32 *lsn = of_get_property(dn, "linux,logical-slot-number", NULL); BUG_ON(lsn == NULL); @@ -194,5 +194,5 @@ void iommu_init_early_iSeries(void) ppc_md.tce_build = tce_build_iSeries; ppc_md.tce_free = tce_free_iSeries; - pci_dma_ops = &dma_iommu_ops; + set_pci_dma_ops(&dma_iommu_ops); } diff --git a/arch/powerpc/platforms/iseries/irq.c b/arch/powerpc/platforms/iseries/irq.c index 5225abfafd9b..63b33675848b 100644 --- a/arch/powerpc/platforms/iseries/irq.c +++ b/arch/powerpc/platforms/iseries/irq.c @@ -30,7 +30,6 @@ #include <linux/param.h> #include <linux/string.h> #include <linux/bootmem.h> -#include <linux/ide.h> #include <linux/irq.h> #include <linux/spinlock.h> @@ -337,6 +336,8 @@ unsigned int iSeries_get_irq(void) return irq; } +#ifdef CONFIG_PCI + static int iseries_irq_host_map(struct irq_host *h, unsigned int virq, irq_hw_number_t hw) { @@ -384,3 +385,4 @@ void __init iSeries_init_IRQ(void) "failed with rc 0x%x\n", ret); } +#endif /* CONFIG_PCI */ diff --git a/arch/powerpc/platforms/iseries/pci.c b/arch/powerpc/platforms/iseries/pci.c index 4a06d9c34986..9c974227155e 100644 --- a/arch/powerpc/platforms/iseries/pci.c +++ b/arch/powerpc/platforms/iseries/pci.c @@ -24,7 +24,6 @@ #include <linux/string.h> #include <linux/init.h> #include <linux/module.h> -#include <linux/ide.h> #include <linux/pci.h> #include <asm/io.h> @@ -177,7 +176,7 @@ void __init iSeries_pci_final_fixup(void) struct pci_dn *pdn = PCI_DN(node); const u32 *agent; - agent = get_property(node, "linux,agent-id", NULL); + agent = of_get_property(node, "linux,agent-id", NULL); if ((pdn != NULL) && (agent != NULL)) { u8 irq = iSeries_allocate_IRQ(pdn->busno, 0, pdn->bussubno); @@ -755,7 +754,7 @@ void __init iSeries_pcibios_init(void) if ((node->type == NULL) || (strcmp(node->type, "pci") != 0)) continue; - busp = get_property(node, "bus-range", NULL); + busp = of_get_property(node, "bus-range", NULL); if (busp == NULL) continue; bus = *busp; diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c index cce7e309340c..7f5dcee814d4 100644 --- a/arch/powerpc/platforms/iseries/setup.c +++ b/arch/powerpc/platforms/iseries/setup.c @@ -628,15 +628,6 @@ static void iseries_iounmap(volatile void __iomem *token) { } -/* - * iSeries has no legacy IO, anything calling this function has to - * fail or bad things will happen - */ -static int iseries_check_legacy_ioport(unsigned int baseport) -{ - return -ENODEV; -} - static int __init iseries_probe(void) { unsigned long root = of_get_flat_dt_root(); @@ -667,7 +658,6 @@ define_machine(iseries) { .calibrate_decr = generic_calibrate_decr, .progress = iSeries_progress, .probe = iseries_probe, - .check_legacy_ioport = iseries_check_legacy_ioport, .ioremap = iseries_ioremap, .iounmap = iseries_iounmap, /* XXX Implement enable_pmcs for iSeries */ diff --git a/arch/powerpc/platforms/iseries/viopath.c b/arch/powerpc/platforms/iseries/viopath.c index e2100ece9c65..2ca2d8a9de97 100644 --- a/arch/powerpc/platforms/iseries/viopath.c +++ b/arch/powerpc/platforms/iseries/viopath.c @@ -155,7 +155,7 @@ static int proc_viopath_show(struct seq_file *m, void *v) node = of_find_node_by_path("/"); sysid = NULL; if (node != NULL) - sysid = get_property(node, "system-id", NULL); + sysid = of_get_property(node, "system-id", NULL); if (sysid == NULL) seq_printf(m, "SRLNBR=<UNKNOWN>\n"); diff --git a/arch/powerpc/platforms/maple/Kconfig b/arch/powerpc/platforms/maple/Kconfig new file mode 100644 index 000000000000..f7c95eb5d8ba --- /dev/null +++ b/arch/powerpc/platforms/maple/Kconfig @@ -0,0 +1,17 @@ +config PPC_MAPLE + depends on PPC_MULTIPLATFORM && PPC64 + bool "Maple 970FX Evaluation Board" + select MPIC + select U3_DART + select MPIC_U3_HT_IRQS + select GENERIC_TBSYNC + select PPC_UDBG_16550 + select PPC_970_NAP + select PPC_NATIVE + select PPC_RTAS + select MMIO_NVRAM + select ATA_NONSTANDARD if ATA + default n + help + This option enables support for the Maple 970FX Evaluation Board. + For more information, refer to <http://www.970eval.com> diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c index 73c59904697f..b1d3b99c3f9d 100644 --- a/arch/powerpc/platforms/maple/pci.c +++ b/arch/powerpc/platforms/maple/pci.c @@ -44,11 +44,11 @@ static int __init fixup_one_level_bus_range(struct device_node *node, int higher int len; /* For PCI<->PCI bridges or CardBus bridges, we go down */ - class_code = get_property(node, "class-code", NULL); + class_code = of_get_property(node, "class-code", NULL); if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI && (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) continue; - bus_range = get_property(node, "bus-range", &len); + bus_range = of_get_property(node, "bus-range", &len); if (bus_range != NULL && len > 2 * sizeof(int)) { if (bus_range[1] > higher) higher = bus_range[1]; @@ -77,7 +77,7 @@ static void __init fixup_bus_range(struct device_node *bridge) bridge->full_name); return; } - bus_range = (int *)prop->value; + bus_range = prop->value; bus_range[1] = fixup_one_level_bus_range(bridge->child, bus_range[1]); } @@ -454,7 +454,7 @@ static int __init add_bridge(struct device_node *dev) DBG("Adding PCI host bridge %s\n", dev->full_name); - bus_range = get_property(dev, "bus-range", &len); + bus_range = of_get_property(dev, "bus-range", &len); if (bus_range == NULL || len < 2 * sizeof(int)) { printk(KERN_WARNING "Can't get bus-range for %s, assume bus 0\n", dev->full_name); diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c index 82d3f9e28d7c..2a30c5b2532e 100644 --- a/arch/powerpc/platforms/maple/setup.c +++ b/arch/powerpc/platforms/maple/setup.c @@ -32,7 +32,6 @@ #include <linux/initrd.h> #include <linux/vt_kern.h> #include <linux/console.h> -#include <linux/ide.h> #include <linux/pci.h> #include <linux/adb.h> #include <linux/cuda.h> @@ -114,8 +113,8 @@ static void maple_restart(char *cmd) printk(KERN_EMERG "Maple: Unable to find Service Processor\n"); goto fail; } - maple_nvram_offset = get_property(sp, "restart-addr", NULL); - maple_nvram_command = get_property(sp, "restart-value", NULL); + maple_nvram_offset = of_get_property(sp, "restart-addr", NULL); + maple_nvram_command = of_get_property(sp, "restart-value", NULL); of_node_put(sp); /* send command */ @@ -141,8 +140,8 @@ static void maple_power_off(void) printk(KERN_EMERG "Maple: Unable to find Service Processor\n"); goto fail; } - maple_nvram_offset = get_property(sp, "power-off-addr", NULL); - maple_nvram_command = get_property(sp, "power-off-value", NULL); + maple_nvram_offset = of_get_property(sp, "power-off-addr", NULL); + maple_nvram_command = of_get_property(sp, "power-off-value", NULL); of_node_put(sp); /* send command */ @@ -249,8 +248,8 @@ static void __init maple_init_IRQ(void) /* Find address list in /platform-open-pic */ root = of_find_node_by_path("/"); - naddr = prom_n_addr_cells(root); - opprop = get_property(root, "platform-open-pic", &opplen); + naddr = of_n_addr_cells(root); + opprop = of_get_property(root, "platform-open-pic", &opplen); if (opprop != 0) { openpic_addr = of_read_number(opprop, naddr); has_isus = (opplen > naddr); @@ -261,11 +260,11 @@ static void __init maple_init_IRQ(void) BUG_ON(openpic_addr == 0); /* Check for a big endian MPIC */ - if (get_property(np, "big-endian", NULL) != NULL) + if (of_get_property(np, "big-endian", NULL) != NULL) flags |= MPIC_BIG_ENDIAN; /* XXX Maple specific bits */ - flags |= MPIC_BROKEN_U3 | MPIC_WANTS_RESET; + flags |= MPIC_U3_HT_IRQS | MPIC_WANTS_RESET; /* All U3/U4 are big-endian, older SLOF firmware doesn't encode this */ flags |= MPIC_BIG_ENDIAN; diff --git a/arch/powerpc/platforms/pasemi/Kconfig b/arch/powerpc/platforms/pasemi/Kconfig index 68dc529dfd2f..eb4dbc705b06 100644 --- a/arch/powerpc/platforms/pasemi/Kconfig +++ b/arch/powerpc/platforms/pasemi/Kconfig @@ -1,3 +1,15 @@ +config PPC_PASEMI + depends on PPC_MULTIPLATFORM && PPC64 + bool "PA Semi SoC-based platforms" + default n + select MPIC + select PPC_UDBG_16550 + select GENERIC_TBSYNC + select PPC_NATIVE + help + This option enables support for PA Semi's PWRficient line + of SoC processors, including PA6T-1682M + menu "PA Semi PWRficient options" depends on PPC_PASEMI @@ -7,4 +19,11 @@ config PPC_PASEMI_IOMMU help IOMMU support for PA6T-1682M +config PPC_PASEMI_MDIO + depends on PHYLIB + tristate "MDIO support via GPIO" + default y + help + Driver for MDIO via GPIO on PWRficient platforms + endmenu diff --git a/arch/powerpc/platforms/pasemi/Makefile b/arch/powerpc/platforms/pasemi/Makefile index e657ccae90a9..2cd2a4f26a48 100644 --- a/arch/powerpc/platforms/pasemi/Makefile +++ b/arch/powerpc/platforms/pasemi/Makefile @@ -1,2 +1,3 @@ obj-y += setup.o pci.o time.o idle.o powersave.o iommu.o - +obj-$(CONFIG_PPC_PASEMI_MDIO) += gpio_mdio.o +obj-$(CONFIG_PPC_PASEMI_CPUFREQ) += cpufreq.o diff --git a/arch/powerpc/platforms/pasemi/cpufreq.c b/arch/powerpc/platforms/pasemi/cpufreq.c new file mode 100644 index 000000000000..2a57d6023685 --- /dev/null +++ b/arch/powerpc/platforms/pasemi/cpufreq.c @@ -0,0 +1,308 @@ +/* + * Copyright (C) 2007 PA Semi, Inc + * + * Authors: Egor Martovetsky <egor@pasemi.com> + * Olof Johansson <olof@lixom.net> + * + * Maintained by: Olof Johansson <olof@lixom.net> + * + * Based on arch/powerpc/platforms/cell/cbe_cpufreq.c: + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include <linux/cpufreq.h> +#include <linux/timer.h> + +#include <asm/hw_irq.h> +#include <asm/io.h> +#include <asm/prom.h> + +#define SDCASR_REG 0x0100 +#define SDCASR_REG_STRIDE 0x1000 +#define SDCPWR_CFGA0_REG 0x0100 +#define SDCPWR_PWST0_REG 0x0000 +#define SDCPWR_GIZTIME_REG 0x0440 + +/* SDCPWR_GIZTIME_REG fields */ +#define SDCPWR_GIZTIME_GR 0x80000000 +#define SDCPWR_GIZTIME_LONGLOCK 0x000000ff + +/* Offset of ASR registers from SDC base */ +#define SDCASR_OFFSET 0x120000 + +static void __iomem *sdcpwr_mapbase; +static void __iomem *sdcasr_mapbase; + +static DEFINE_MUTEX(pas_switch_mutex); + +/* Current astate, is used when waking up from power savings on + * one core, in case the other core has switched states during + * the idle time. + */ +static int current_astate; + +/* We support 5(A0-A4) power states excluding turbo(A5-A6) modes */ +static struct cpufreq_frequency_table pas_freqs[] = { + {0, 0}, + {1, 0}, + {2, 0}, + {3, 0}, + {4, 0}, + {0, CPUFREQ_TABLE_END}, +}; + +static struct freq_attr *pas_cpu_freqs_attr[] = { + &cpufreq_freq_attr_scaling_available_freqs, + NULL, +}; + +/* + * hardware specific functions + */ + +static int get_astate_freq(int astate) +{ + u32 ret; + ret = in_le32(sdcpwr_mapbase + SDCPWR_CFGA0_REG + (astate * 0x10)); + + return ret & 0x3f; +} + +static int get_cur_astate(int cpu) +{ + u32 ret; + + ret = in_le32(sdcpwr_mapbase + SDCPWR_PWST0_REG); + ret = (ret >> (cpu * 4)) & 0x7; + + return ret; +} + +static int get_gizmo_latency(void) +{ + u32 giztime, ret; + + giztime = in_le32(sdcpwr_mapbase + SDCPWR_GIZTIME_REG); + + /* just provide the upper bound */ + if (giztime & SDCPWR_GIZTIME_GR) + ret = (giztime & SDCPWR_GIZTIME_LONGLOCK) * 128000; + else + ret = (giztime & SDCPWR_GIZTIME_LONGLOCK) * 1000; + + return ret; +} + +static void set_astate(int cpu, unsigned int astate) +{ + u64 flags; + + /* Return if called before init has run */ + if (unlikely(!sdcasr_mapbase)) + return; + + local_irq_save(flags); + + out_le32(sdcasr_mapbase + SDCASR_REG + SDCASR_REG_STRIDE*cpu, astate); + + local_irq_restore(flags); +} + +void restore_astate(int cpu) +{ + set_astate(cpu, current_astate); +} + +/* + * cpufreq functions + */ + +static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + const u32 *max_freqp; + u32 max_freq; + int i, cur_astate; + struct resource res; + struct device_node *cpu, *dn; + int err = -ENODEV; + + cpu = of_get_cpu_node(policy->cpu, NULL); + + if (!cpu) + goto out; + + dn = of_find_compatible_node(NULL, "sdc", "1682m-sdc"); + if (!dn) + goto out; + err = of_address_to_resource(dn, 0, &res); + of_node_put(dn); + if (err) + goto out; + sdcasr_mapbase = ioremap(res.start + SDCASR_OFFSET, 0x2000); + if (!sdcasr_mapbase) { + err = -EINVAL; + goto out; + } + + dn = of_find_compatible_node(NULL, "gizmo", "1682m-gizmo"); + if (!dn) { + err = -ENODEV; + goto out_unmap_sdcasr; + } + err = of_address_to_resource(dn, 0, &res); + of_node_put(dn); + if (err) + goto out_unmap_sdcasr; + sdcpwr_mapbase = ioremap(res.start, 0x1000); + if (!sdcpwr_mapbase) { + err = -EINVAL; + goto out_unmap_sdcasr; + } + + pr_debug("init cpufreq on CPU %d\n", policy->cpu); + + max_freqp = of_get_property(cpu, "clock-frequency", NULL); + if (!max_freqp) { + err = -EINVAL; + goto out_unmap_sdcpwr; + } + + /* we need the freq in kHz */ + max_freq = *max_freqp / 1000; + + pr_debug("max clock-frequency is at %u kHz\n", max_freq); + pr_debug("initializing frequency table\n"); + + /* initialize frequency table */ + for (i=0; pas_freqs[i].frequency!=CPUFREQ_TABLE_END; i++) { + pas_freqs[i].frequency = get_astate_freq(pas_freqs[i].index) * 100000; + pr_debug("%d: %d\n", i, pas_freqs[i].frequency); + } + + policy->governor = CPUFREQ_DEFAULT_GOVERNOR; + + policy->cpuinfo.transition_latency = get_gizmo_latency(); + + cur_astate = get_cur_astate(policy->cpu); + pr_debug("current astate is at %d\n",cur_astate); + + policy->cur = pas_freqs[cur_astate].frequency; + policy->cpus = cpu_online_map; + + cpufreq_frequency_table_get_attr(pas_freqs, policy->cpu); + + /* this ensures that policy->cpuinfo_min and policy->cpuinfo_max + * are set correctly + */ + return cpufreq_frequency_table_cpuinfo(policy, pas_freqs); + +out_unmap_sdcpwr: + iounmap(sdcpwr_mapbase); + +out_unmap_sdcasr: + iounmap(sdcasr_mapbase); +out: + return err; +} + +static int pas_cpufreq_cpu_exit(struct cpufreq_policy *policy) +{ + if (sdcasr_mapbase) + iounmap(sdcasr_mapbase); + if (sdcpwr_mapbase) + iounmap(sdcpwr_mapbase); + + cpufreq_frequency_table_put_attr(policy->cpu); + return 0; +} + +static int pas_cpufreq_verify(struct cpufreq_policy *policy) +{ + return cpufreq_frequency_table_verify(policy, pas_freqs); +} + +static int pas_cpufreq_target(struct cpufreq_policy *policy, + unsigned int target_freq, + unsigned int relation) +{ + struct cpufreq_freqs freqs; + int pas_astate_new; + int i; + + cpufreq_frequency_table_target(policy, + pas_freqs, + target_freq, + relation, + &pas_astate_new); + + freqs.old = policy->cur; + freqs.new = pas_freqs[pas_astate_new].frequency; + freqs.cpu = policy->cpu; + + mutex_lock(&pas_switch_mutex); + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); + + pr_debug("setting frequency for cpu %d to %d kHz, 1/%d of max frequency\n", + policy->cpu, + pas_freqs[pas_astate_new].frequency, + pas_freqs[pas_astate_new].index); + + current_astate = pas_astate_new; + + for_each_online_cpu(i) + set_astate(i, pas_astate_new); + + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); + mutex_unlock(&pas_switch_mutex); + + return 0; +} + +static struct cpufreq_driver pas_cpufreq_driver = { + .name = "pas-cpufreq", + .owner = THIS_MODULE, + .flags = CPUFREQ_CONST_LOOPS, + .init = pas_cpufreq_cpu_init, + .exit = pas_cpufreq_cpu_exit, + .verify = pas_cpufreq_verify, + .target = pas_cpufreq_target, + .attr = pas_cpu_freqs_attr, +}; + +/* + * module init and destoy + */ + +static int __init pas_cpufreq_init(void) +{ + if (!machine_is_compatible("PA6T-1682M")) + return -ENODEV; + + return cpufreq_register_driver(&pas_cpufreq_driver); +} + +static void __exit pas_cpufreq_exit(void) +{ + cpufreq_unregister_driver(&pas_cpufreq_driver); +} + +module_init(pas_cpufreq_init); +module_exit(pas_cpufreq_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Egor Martovetsky <egor@pasemi.com>, Olof Johansson <olof@lixom.net>"); diff --git a/arch/powerpc/platforms/pasemi/gpio_mdio.c b/arch/powerpc/platforms/pasemi/gpio_mdio.c new file mode 100644 index 000000000000..c91a33593bb8 --- /dev/null +++ b/arch/powerpc/platforms/pasemi/gpio_mdio.c @@ -0,0 +1,339 @@ +/* + * Copyright (C) 2006-2007 PA Semi, Inc + * + * Author: Olof Johansson, PA Semi + * + * Maintained by: Olof Johansson <olof@lixom.net> + * + * Based on drivers/net/fs_enet/mii-bitbang.c. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/io.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/sched.h> +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/phy.h> +#include <linux/platform_device.h> +#include <asm/of_platform.h> + +#define DELAY 1 + +static void __iomem *gpio_regs; + +struct gpio_priv { + int mdc_pin; + int mdio_pin; +}; + +#define MDC_PIN(bus) (((struct gpio_priv *)bus->priv)->mdc_pin) +#define MDIO_PIN(bus) (((struct gpio_priv *)bus->priv)->mdio_pin) + +static inline void mdio_lo(struct mii_bus *bus) +{ + out_le32(gpio_regs+0x10, 1 << MDIO_PIN(bus)); +} + +static inline void mdio_hi(struct mii_bus *bus) +{ + out_le32(gpio_regs, 1 << MDIO_PIN(bus)); +} + +static inline void mdc_lo(struct mii_bus *bus) +{ + out_le32(gpio_regs+0x10, 1 << MDC_PIN(bus)); +} + +static inline void mdc_hi(struct mii_bus *bus) +{ + out_le32(gpio_regs, 1 << MDC_PIN(bus)); +} + +static inline void mdio_active(struct mii_bus *bus) +{ + out_le32(gpio_regs+0x20, (1 << MDC_PIN(bus)) | (1 << MDIO_PIN(bus))); +} + +static inline void mdio_tristate(struct mii_bus *bus) +{ + out_le32(gpio_regs+0x30, (1 << MDIO_PIN(bus))); +} + +static inline int mdio_read(struct mii_bus *bus) +{ + return !!(in_le32(gpio_regs+0x40) & (1 << MDIO_PIN(bus))); +} + +static void clock_out(struct mii_bus *bus, int bit) +{ + if (bit) + mdio_hi(bus); + else + mdio_lo(bus); + udelay(DELAY); + mdc_hi(bus); + udelay(DELAY); + mdc_lo(bus); +} + +/* Utility to send the preamble, address, and register (common to read and write). */ +static void bitbang_pre(struct mii_bus *bus, int read, u8 addr, u8 reg) +{ + int i; + + /* CFE uses a really long preamble (40 bits). We'll do the same. */ + mdio_active(bus); + for (i = 0; i < 40; i++) { + clock_out(bus, 1); + } + + /* send the start bit (01) and the read opcode (10) or write (10) */ + clock_out(bus, 0); + clock_out(bus, 1); + + clock_out(bus, read); + clock_out(bus, !read); + + /* send the PHY address */ + for (i = 0; i < 5; i++) { + clock_out(bus, (addr & 0x10) != 0); + addr <<= 1; + } + + /* send the register address */ + for (i = 0; i < 5; i++) { + clock_out(bus, (reg & 0x10) != 0); + reg <<= 1; + } +} + +static int gpio_mdio_read(struct mii_bus *bus, int phy_id, int location) +{ + u16 rdreg; + int ret, i; + u8 addr = phy_id & 0xff; + u8 reg = location & 0xff; + + bitbang_pre(bus, 1, addr, reg); + + /* tri-state our MDIO I/O pin so we can read */ + mdio_tristate(bus); + udelay(DELAY); + mdc_hi(bus); + udelay(DELAY); + mdc_lo(bus); + + /* read 16 bits of register data, MSB first */ + rdreg = 0; + for (i = 0; i < 16; i++) { + mdc_lo(bus); + udelay(DELAY); + mdc_hi(bus); + udelay(DELAY); + mdc_lo(bus); + udelay(DELAY); + rdreg <<= 1; + rdreg |= mdio_read(bus); + } + + mdc_hi(bus); + udelay(DELAY); + mdc_lo(bus); + udelay(DELAY); + + ret = rdreg; + + return ret; +} + +static int gpio_mdio_write(struct mii_bus *bus, int phy_id, int location, u16 val) +{ + int i; + + u8 addr = phy_id & 0xff; + u8 reg = location & 0xff; + u16 value = val & 0xffff; + + bitbang_pre(bus, 0, addr, reg); + + /* send the turnaround (10) */ + mdc_lo(bus); + mdio_hi(bus); + udelay(DELAY); + mdc_hi(bus); + udelay(DELAY); + mdc_lo(bus); + mdio_lo(bus); + udelay(DELAY); + mdc_hi(bus); + udelay(DELAY); + + /* write 16 bits of register data, MSB first */ + for (i = 0; i < 16; i++) { + mdc_lo(bus); + if (value & 0x8000) + mdio_hi(bus); + else + mdio_lo(bus); + udelay(DELAY); + mdc_hi(bus); + udelay(DELAY); + value <<= 1; + } + + /* + * Tri-state the MDIO line. + */ + mdio_tristate(bus); + mdc_lo(bus); + udelay(DELAY); + mdc_hi(bus); + udelay(DELAY); + return 0; +} + +static int gpio_mdio_reset(struct mii_bus *bus) +{ + /*nothing here - dunno how to reset it*/ + return 0; +} + + +static int __devinit gpio_mdio_probe(struct of_device *ofdev, + const struct of_device_id *match) +{ + struct device *dev = &ofdev->dev; + struct device_node *np = ofdev->node; + struct device_node *gpio_np; + struct mii_bus *new_bus; + struct resource res; + struct gpio_priv *priv; + const unsigned int *prop; + int err = 0; + int i; + + gpio_np = of_find_compatible_node(NULL, "gpio", "1682m-gpio"); + + if (!gpio_np) + return -ENODEV; + + err = of_address_to_resource(gpio_np, 0, &res); + of_node_put(gpio_np); + + if (err) + return -EINVAL; + + if (!gpio_regs) + gpio_regs = ioremap(res.start, 0x100); + + if (!gpio_regs) + return -EPERM; + + priv = kzalloc(sizeof(struct gpio_priv), GFP_KERNEL); + if (priv == NULL) + return -ENOMEM; + + new_bus = kzalloc(sizeof(struct mii_bus), GFP_KERNEL); + + if (new_bus == NULL) + return -ENOMEM; + + new_bus->name = "pasemi gpio mdio bus", + new_bus->read = &gpio_mdio_read, + new_bus->write = &gpio_mdio_write, + new_bus->reset = &gpio_mdio_reset, + + prop = of_get_property(np, "reg", NULL); + new_bus->id = *prop; + new_bus->priv = priv; + + new_bus->phy_mask = 0; + + new_bus->irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL); + for(i = 0; i < PHY_MAX_ADDR; ++i) + new_bus->irq[i] = irq_create_mapping(NULL, 10); + + + prop = of_get_property(np, "mdc-pin", NULL); + priv->mdc_pin = *prop; + + prop = of_get_property(np, "mdio-pin", NULL); + priv->mdio_pin = *prop; + + new_bus->dev = dev; + dev_set_drvdata(dev, new_bus); + + err = mdiobus_register(new_bus); + + if (0 != err) { + printk(KERN_ERR "%s: Cannot register as MDIO bus, err %d\n", + new_bus->name, err); + goto bus_register_fail; + } + + return 0; + +bus_register_fail: + kfree(new_bus); + + return err; +} + + +static int gpio_mdio_remove(struct of_device *dev) +{ + struct mii_bus *bus = dev_get_drvdata(&dev->dev); + + mdiobus_unregister(bus); + + dev_set_drvdata(&dev->dev, NULL); + + kfree(bus->priv); + bus->priv = NULL; + kfree(bus); + + return 0; +} + +static struct of_device_id gpio_mdio_match[] = +{ + { + .compatible = "gpio-mdio", + }, + {}, +}; + +static struct of_platform_driver gpio_mdio_driver = +{ + .name = "gpio-mdio-bitbang", + .match_table = gpio_mdio_match, + .probe = gpio_mdio_probe, + .remove = gpio_mdio_remove, +}; + +int gpio_mdio_init(void) +{ + return of_register_platform_driver(&gpio_mdio_driver); +} + +void gpio_mdio_exit(void) +{ + of_unregister_platform_driver(&gpio_mdio_driver); +} +device_initcall(gpio_mdio_init); + diff --git a/arch/powerpc/platforms/pasemi/idle.c b/arch/powerpc/platforms/pasemi/idle.c index 1ca3ff381591..5985ce0c5c48 100644 --- a/arch/powerpc/platforms/pasemi/idle.c +++ b/arch/powerpc/platforms/pasemi/idle.c @@ -61,6 +61,10 @@ static int pasemi_system_reset_exception(struct pt_regs *regs) /* do system reset */ return 0; } + + /* Set higher astate since we come out of power savings at 0 */ + restore_astate(hard_smp_processor_id()); + /* everything handled */ regs->msr |= MSR_RI; return 1; @@ -68,6 +72,11 @@ static int pasemi_system_reset_exception(struct pt_regs *regs) void __init pasemi_idle_init(void) { +#ifndef CONFIG_PPC_PASEMI_CPUFREQ + printk(KERN_WARNING "No cpufreq driver, powersavings modes disabled\n"); + current_mode = 0; +#endif + ppc_md.system_reset_exception = pasemi_system_reset_exception; ppc_md.power_save = modes[current_mode].entry; printk(KERN_INFO "Using PA6T idle loop (%s)\n", modes[current_mode].name); diff --git a/arch/powerpc/platforms/pasemi/iommu.c b/arch/powerpc/platforms/pasemi/iommu.c index 71dbf1a56e13..95fa6a7d15ee 100644 --- a/arch/powerpc/platforms/pasemi/iommu.c +++ b/arch/powerpc/platforms/pasemi/iommu.c @@ -249,13 +249,13 @@ void iommu_init_early_pasemi(void) iommu_off = 1; #else iommu_off = of_chosen && - get_property(of_chosen, "linux,iommu-off", NULL); + of_get_property(of_chosen, "linux,iommu-off", NULL); #endif if (iommu_off) { /* Direct I/O, IOMMU off */ ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_null; ppc_md.pci_dma_bus_setup = pci_dma_bus_setup_null; - pci_dma_ops = &dma_direct_ops; + set_pci_dma_ops(&dma_direct_ops); return; } @@ -266,7 +266,7 @@ void iommu_init_early_pasemi(void) ppc_md.pci_dma_bus_setup = pci_dma_bus_setup_pasemi; ppc_md.tce_build = iobmap_build; ppc_md.tce_free = iobmap_free; - pci_dma_ops = &dma_iommu_ops; + set_pci_dma_ops(&dma_iommu_ops); } void __init alloc_iobmap_l2(void) diff --git a/arch/powerpc/platforms/pasemi/pasemi.h b/arch/powerpc/platforms/pasemi/pasemi.h index 2d3927e6edb0..be8495497611 100644 --- a/arch/powerpc/platforms/pasemi/pasemi.h +++ b/arch/powerpc/platforms/pasemi/pasemi.h @@ -14,6 +14,14 @@ extern void __init pasemi_idle_init(void); extern void idle_spin(void); extern void idle_doze(void); +/* Restore astate to last set */ +#ifdef CONFIG_PPC_PASEMI_CPUFREQ +extern void restore_astate(int cpu); +#else +static inline void restore_astate(int cpu) +{ +} +#endif #endif /* _PASEMI_PASEMI_H */ diff --git a/arch/powerpc/platforms/pasemi/pci.c b/arch/powerpc/platforms/pasemi/pci.c index 7ecb2ba24db9..056243da360b 100644 --- a/arch/powerpc/platforms/pasemi/pci.c +++ b/arch/powerpc/platforms/pasemi/pci.c @@ -33,7 +33,17 @@ #define PA_PXP_CFA(bus, devfn, off) (((bus) << 20) | ((devfn) << 12) | (off)) -#define CONFIG_OFFSET_VALID(off) ((off) < 4096) +static inline int pa_pxp_offset_valid(u8 bus, u8 devfn, int offset) +{ + /* Device 0 Function 0 is special: It's config space spans function 1 as + * well, so allow larger offset. It's really a two-function device but the + * second function does not probe. + */ + if (bus == 0 && devfn == 0) + return offset < 8192; + else + return offset < 4096; +} static void volatile __iomem *pa_pxp_cfg_addr(struct pci_controller *hose, u8 bus, u8 devfn, int offset) @@ -51,7 +61,7 @@ static int pa_pxp_read_config(struct pci_bus *bus, unsigned int devfn, if (!hose) return PCIBIOS_DEVICE_NOT_FOUND; - if (!CONFIG_OFFSET_VALID(offset)) + if (!pa_pxp_offset_valid(bus->number, devfn, offset)) return PCIBIOS_BAD_REGISTER_NUMBER; addr = pa_pxp_cfg_addr(hose, bus->number, devfn, offset); @@ -85,7 +95,7 @@ static int pa_pxp_write_config(struct pci_bus *bus, unsigned int devfn, if (!hose) return PCIBIOS_DEVICE_NOT_FOUND; - if (!CONFIG_OFFSET_VALID(offset)) + if (!pa_pxp_offset_valid(bus->number, devfn, offset)) return PCIBIOS_BAD_REGISTER_NUMBER; addr = pa_pxp_cfg_addr(hose, bus->number, devfn, offset); diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c index 449cf1a08291..f88f0ec4c8cb 100644 --- a/arch/powerpc/platforms/pasemi/setup.c +++ b/arch/powerpc/platforms/pasemi/setup.c @@ -35,6 +35,7 @@ #include <asm/mpic.h> #include <asm/smp.h> #include <asm/time.h> +#include <asm/of_platform.h> #include "pasemi.h" @@ -101,12 +102,6 @@ void __init pas_setup_arch(void) pasemi_idle_init(); } -/* No legacy IO on our parts */ -static int pas_check_legacy_ioport(unsigned int baseport) -{ - return -ENODEV; -} - static __init void pas_init_IRQ(void) { struct device_node *np; @@ -136,8 +131,8 @@ static __init void pas_init_IRQ(void) /* Find address list in /platform-open-pic */ root = of_find_node_by_path("/"); - naddr = prom_n_addr_cells(root); - opprop = get_property(root, "platform-open-pic", &opplen); + naddr = of_n_addr_cells(root); + opprop = of_get_property(root, "platform-open-pic", &opplen); if (!opprop) { printk(KERN_ERR "No platform-open-pic property.\n"); of_node_put(root); @@ -147,7 +142,7 @@ static __init void pas_init_IRQ(void) printk(KERN_DEBUG "OpenPIC addr: %lx\n", openpic_addr); mpic = mpic_alloc(mpic_node, openpic_addr, - MPIC_PRIMARY|MPIC_LARGE_VECTORS, + MPIC_PRIMARY|MPIC_LARGE_VECTORS|MPIC_WANTS_RESET, 0, 0, " PAS-OPIC "); BUG_ON(!mpic); @@ -209,6 +204,20 @@ static void __init pas_init_early(void) iommu_init_early_pasemi(); } +static struct of_device_id pasemi_bus_ids[] = { + { .type = "sdc", }, + {}, +}; + +static int __init pasemi_publish_devices(void) +{ + /* Publish OF platform devices for southbridge IOs */ + of_platform_bus_probe(NULL, pasemi_bus_ids, NULL); + + return 0; +} +device_initcall(pasemi_publish_devices); + /* * Called very early, MMU is off, device-tree isn't unflattened @@ -237,7 +246,6 @@ define_machine(pas) { .restart = pas_restart, .get_boot_time = pas_get_boot_time, .calibrate_decr = generic_calibrate_decr, - .check_legacy_ioport = pas_check_legacy_ioport, .progress = pas_progress, .machine_check_exception = pas_machine_check_handler, .pci_irq_fixup = pas_pci_irq_fixup, diff --git a/arch/powerpc/platforms/powermac/Kconfig b/arch/powerpc/platforms/powermac/Kconfig new file mode 100644 index 000000000000..5b7afe50039a --- /dev/null +++ b/arch/powerpc/platforms/powermac/Kconfig @@ -0,0 +1,20 @@ +config PPC_PMAC + bool "Apple PowerMac based machines" + depends on PPC_MULTIPLATFORM + select MPIC + select PPC_INDIRECT_PCI if PPC32 + select PPC_MPC106 if PPC32 + select PPC_NATIVE + default y + +config PPC_PMAC64 + bool + depends on PPC_PMAC && POWER4 + select MPIC + select U3_DART + select MPIC_U3_HT_IRQS + select GENERIC_TBSYNC + select PPC_970_NAP + default y + + diff --git a/arch/powerpc/platforms/powermac/backlight.c b/arch/powerpc/platforms/powermac/backlight.c index de7440e62cc4..d679964ae2ab 100644 --- a/arch/powerpc/platforms/powermac/backlight.c +++ b/arch/powerpc/platforms/powermac/backlight.c @@ -56,13 +56,16 @@ struct backlight_device *pmac_backlight; int pmac_has_backlight_type(const char *type) { - struct device_node* bk_node = find_devices("backlight"); + struct device_node* bk_node = of_find_node_by_name(NULL, "backlight"); if (bk_node) { - const char *prop = get_property(bk_node, + const char *prop = of_get_property(bk_node, "backlight-control", NULL); - if (prop && strncmp(prop, type, strlen(type)) == 0) + if (prop && strncmp(prop, type, strlen(type)) == 0) { + of_node_put(bk_node); return 1; + } + of_node_put(bk_node); } return 0; diff --git a/arch/powerpc/platforms/powermac/cpufreq_32.c b/arch/powerpc/platforms/powermac/cpufreq_32.c index c2b6b4134f68..8943a9456bb7 100644 --- a/arch/powerpc/platforms/powermac/cpufreq_32.c +++ b/arch/powerpc/platforms/powermac/cpufreq_32.c @@ -421,7 +421,7 @@ static int pmac_cpufreq_cpu_init(struct cpufreq_policy *policy) static u32 read_gpio(struct device_node *np) { - const u32 *reg = get_property(np, "reg", NULL); + const u32 *reg = of_get_property(np, "reg", NULL); u32 offset; if (reg == NULL) @@ -521,13 +521,14 @@ static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode) int lenp, rc; const u32 *freqs, *ratio; - freqs = get_property(cpunode, "bus-frequencies", &lenp); + freqs = of_get_property(cpunode, "bus-frequencies", &lenp); lenp /= sizeof(u32); if (freqs == NULL || lenp != 2) { printk(KERN_ERR "cpufreq: bus-frequencies incorrect or missing\n"); return 1; } - ratio = get_property(cpunode, "processor-to-bus-ratio*2", NULL); + ratio = of_get_property(cpunode, "processor-to-bus-ratio*2", + NULL); if (ratio == NULL) { printk(KERN_ERR "cpufreq: processor-to-bus-ratio*2 missing\n"); return 1; @@ -562,7 +563,7 @@ static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode) /* If we use the PMU, look for the min & max frequencies in the * device-tree */ - value = get_property(cpunode, "min-clock-frequency", NULL); + value = of_get_property(cpunode, "min-clock-frequency", NULL); if (!value) return 1; low_freq = (*value) / 1000; @@ -571,7 +572,7 @@ static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode) if (low_freq < 100000) low_freq *= 10; - value = get_property(cpunode, "max-clock-frequency", NULL); + value = of_get_property(cpunode, "max-clock-frequency", NULL); if (!value) return 1; hi_freq = (*value) / 1000; @@ -585,7 +586,7 @@ static int pmac_cpufreq_init_7447A(struct device_node *cpunode) { struct device_node *volt_gpio_np; - if (get_property(cpunode, "dynamic-power-step", NULL) == NULL) + if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL) return 1; volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select"); @@ -614,11 +615,11 @@ static int pmac_cpufreq_init_750FX(struct device_node *cpunode) u32 pvr; const u32 *value; - if (get_property(cpunode, "dynamic-power-step", NULL) == NULL) + if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL) return 1; hi_freq = cur_freq; - value = get_property(cpunode, "reduced-clock-frequency", NULL); + value = of_get_property(cpunode, "reduced-clock-frequency", NULL); if (!value) return 1; low_freq = (*value) / 1000; @@ -657,19 +658,19 @@ static int __init pmac_cpufreq_setup(void) return 0; /* Assume only one CPU */ - cpunode = find_type_devices("cpu"); + cpunode = of_find_node_by_type(NULL, "cpu"); if (!cpunode) goto out; /* Get current cpu clock freq */ - value = get_property(cpunode, "clock-frequency", NULL); + value = of_get_property(cpunode, "clock-frequency", NULL); if (!value) goto out; cur_freq = (*value) / 1000; /* Check for 7447A based MacRISC3 */ if (machine_is_compatible("MacRISC3") && - get_property(cpunode, "dynamic-power-step", NULL) && + of_get_property(cpunode, "dynamic-power-step", NULL) && PVR_VER(mfspr(SPRN_PVR)) == 0x8003) { pmac_cpufreq_init_7447A(cpunode); /* Check for other MacRISC3 machines */ @@ -707,6 +708,7 @@ static int __init pmac_cpufreq_setup(void) else if (PVR_VER(mfspr(SPRN_PVR)) == 0x7000) pmac_cpufreq_init_750FX(cpunode); out: + of_node_put(cpunode); if (set_speed_proc == NULL) return -ENODEV; diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c index 9d22361a26d6..567d5523b690 100644 --- a/arch/powerpc/platforms/powermac/cpufreq_64.c +++ b/arch/powerpc/platforms/powermac/cpufreq_64.c @@ -410,7 +410,7 @@ static int __init g5_neo2_cpufreq_init(struct device_node *cpus) /* Get first CPU node */ for (cpunode = NULL; (cpunode = of_get_next_child(cpus, cpunode)) != NULL;) { - const u32 *reg = get_property(cpunode, "reg", NULL); + const u32 *reg = of_get_property(cpunode, "reg", NULL); if (reg == NULL || (*reg) != 0) continue; if (!strcmp(cpunode->type, "cpu")) @@ -422,7 +422,7 @@ static int __init g5_neo2_cpufreq_init(struct device_node *cpus) } /* Check 970FX for now */ - valp = get_property(cpunode, "cpu-version", NULL); + valp = of_get_property(cpunode, "cpu-version", NULL); if (!valp) { DBG("No cpu-version property !\n"); goto bail_noprops; @@ -434,7 +434,7 @@ static int __init g5_neo2_cpufreq_init(struct device_node *cpus) } /* Look for the powertune data in the device-tree */ - g5_pmode_data = get_property(cpunode, "power-mode-data",&psize); + g5_pmode_data = of_get_property(cpunode, "power-mode-data",&psize); if (!g5_pmode_data) { DBG("No power-mode-data !\n"); goto bail_noprops; @@ -493,7 +493,7 @@ static int __init g5_neo2_cpufreq_init(struct device_node *cpus) * half freq in this version. So far, I haven't yet seen a machine * supporting anything else. */ - valp = get_property(cpunode, "clock-frequency", NULL); + valp = of_get_property(cpunode, "clock-frequency", NULL); if (!valp) return -ENODEV; max_freq = (*valp)/1000; @@ -563,7 +563,7 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpus) /* Lookup the cpuid eeprom node */ cpuid = of_find_node_by_path("/u3@0,f8000000/i2c@f8001000/cpuid@a0"); if (cpuid != NULL) - eeprom = get_property(cpuid, "cpuid", NULL); + eeprom = of_get_property(cpuid, "cpuid", NULL); if (eeprom == NULL) { printk(KERN_ERR "cpufreq: Can't find cpuid EEPROM !\n"); rc = -ENODEV; @@ -573,13 +573,13 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpus) /* Lookup the i2c hwclock */ for (hwclock = NULL; (hwclock = of_find_node_by_name(hwclock, "i2c-hwclock")) != NULL;){ - const char *loc = get_property(hwclock, + const char *loc = of_get_property(hwclock, "hwctrl-location", NULL); if (loc == NULL) continue; if (strcmp(loc, "CPU CLOCK")) continue; - if (!get_property(hwclock, "platform-get-frequency", NULL)) + if (!of_get_property(hwclock, "platform-get-frequency", NULL)) continue; break; } @@ -638,7 +638,7 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpus) */ /* Get max frequency from device-tree */ - valp = get_property(cpunode, "clock-frequency", NULL); + valp = of_get_property(cpunode, "clock-frequency", NULL); if (!valp) { printk(KERN_ERR "cpufreq: Can't find CPU frequency !\n"); rc = -ENODEV; diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c index 24cc50c1774a..52cfdd86c928 100644 --- a/arch/powerpc/platforms/powermac/feature.c +++ b/arch/powerpc/platforms/powermac/feature.c @@ -1044,6 +1044,7 @@ core99_reset_cpu(struct device_node *node, long param, long value) unsigned long flags; struct macio_chip *macio; struct device_node *np; + struct device_node *cpus; const int dflt_reset_lines[] = { KL_GPIO_RESET_CPU0, KL_GPIO_RESET_CPU1, KL_GPIO_RESET_CPU2, @@ -1053,12 +1054,12 @@ core99_reset_cpu(struct device_node *node, long param, long value) if (macio->type != macio_keylargo) return -ENODEV; - np = find_path_device("/cpus"); - if (np == NULL) + cpus = of_find_node_by_path("/cpus"); + if (cpus == NULL) return -ENODEV; - for (np = np->child; np != NULL; np = np->sibling) { - const u32 *num = get_property(np, "reg", NULL); - const u32 *rst = get_property(np, "soft-reset", NULL); + for (np = cpus->child; np != NULL; np = np->sibling) { + const u32 *num = of_get_property(np, "reg", NULL); + const u32 *rst = of_get_property(np, "soft-reset", NULL); if (num == NULL || rst == NULL) continue; if (param == *num) { @@ -1066,6 +1067,7 @@ core99_reset_cpu(struct device_node *node, long param, long value) break; } } + of_node_put(cpus); if (np == NULL || reset_io == 0) reset_io = dflt_reset_lines[param]; @@ -1095,7 +1097,7 @@ core99_usb_enable(struct device_node *node, long param, long value) macio->type != macio_intrepid) return -ENODEV; - prop = get_property(node, "AAPL,clock-id", NULL); + prop = of_get_property(node, "AAPL,clock-id", NULL); if (!prop) return -ENODEV; if (strncmp(prop, "usb0u048", 8) == 0) @@ -1497,17 +1499,18 @@ static long g5_reset_cpu(struct device_node *node, long param, long value) unsigned long flags; struct macio_chip *macio; struct device_node *np; + struct device_node *cpus; macio = &macio_chips[0]; if (macio->type != macio_keylargo2 && macio->type != macio_shasta) return -ENODEV; - np = find_path_device("/cpus"); - if (np == NULL) + cpus = of_find_node_by_path("/cpus"); + if (cpus == NULL) return -ENODEV; - for (np = np->child; np != NULL; np = np->sibling) { - const u32 *num = get_property(np, "reg", NULL); - const u32 *rst = get_property(np, "soft-reset", NULL); + for (np = cpus->child; np != NULL; np = np->sibling) { + const u32 *num = of_get_property(np, "reg", NULL); + const u32 *rst = of_get_property(np, "soft-reset", NULL); if (num == NULL || rst == NULL) continue; if (param == *num) { @@ -1515,6 +1518,7 @@ static long g5_reset_cpu(struct device_node *node, long param, long value) break; } } + of_node_put(cpus); if (np == NULL || reset_io == 0) return -ENODEV; @@ -2404,14 +2408,15 @@ static int __init probe_motherboard(void) struct macio_chip *macio = &macio_chips[0]; const char *model = NULL; struct device_node *dt; + int ret = 0; /* Lookup known motherboard type in device-tree. First try an * exact match on the "model" property, then try a "compatible" * match is none is found. */ - dt = find_devices("device-tree"); + dt = of_find_node_by_name(NULL, "device-tree"); if (dt != NULL) - model = get_property(dt, "model", NULL); + model = of_get_property(dt, "model", NULL); for(i=0; model && i<(sizeof(pmac_mb_defs)/sizeof(struct pmac_mb_def)); i++) { if (strcmp(model, pmac_mb_defs[i].model_string) == 0) { pmac_mb = pmac_mb_defs[i]; @@ -2474,15 +2479,18 @@ static int __init probe_motherboard(void) break; #endif /* CONFIG_POWER4 */ default: - return -ENODEV; + ret = -ENODEV; + goto done; } found: #ifndef CONFIG_POWER4 /* Fixup Hooper vs. Comet */ if (pmac_mb.model_id == PMAC_TYPE_HOOPER) { u32 __iomem * mach_id_ptr = ioremap(0xf3000034, 4); - if (!mach_id_ptr) - return -ENODEV; + if (!mach_id_ptr) { + ret = -ENODEV; + goto done; + } /* Here, I used to disable the media-bay on comet. It * appears this is wrong, the floppy connector is actually * a kind of media-bay and works with the current driver. @@ -2499,18 +2507,26 @@ found: * that all Apple OF revs did it properly, I do it the paranoid way. */ while (uninorth_base && uninorth_rev > 3) { - struct device_node *np = find_path_device("/cpus"); - if (!np || !np->child) { + struct device_node *cpus = of_find_node_by_path("/cpus"); + struct device_node *np; + + if (!cpus || !cpus->child) { printk(KERN_WARNING "Can't find CPU(s) in device tree !\n"); + of_node_put(cpus); break; } - np = np->child; + np = cpus->child; /* Nap mode not supported on SMP */ - if (np->sibling) + if (np->sibling) { + of_node_put(cpus); break; + } /* Nap mode not supported if flush-on-lock property is present */ - if (get_property(np, "flush-on-lock", NULL)) + if (of_get_property(np, "flush-on-lock", NULL)) { + of_node_put(cpus); break; + } + of_node_put(cpus); powersave_nap = 1; printk(KERN_DEBUG "Processor NAP mode on idle enabled.\n"); break; @@ -2532,7 +2548,9 @@ found: printk(KERN_INFO "PowerMac motherboard: %s\n", pmac_mb.model_name); - return 0; +done: + of_node_put(dt); + return ret; } /* Initialize the Core99 UniNorth host bridge and memory controller @@ -2558,7 +2576,7 @@ static void __init probe_uninorth(void) if (uninorth_node == NULL) return; - addrp = get_property(uninorth_node, "reg", NULL); + addrp = of_get_property(uninorth_node, "reg", NULL); if (addrp == NULL) return; address = of_translate_address(uninorth_node, addrp); @@ -2642,7 +2660,7 @@ static void __init probe_one_macio(const char *name, const char *compat, int typ return; } if (type == macio_keylargo || type == macio_keylargo2) { - const u32 *did = get_property(node, "device-id", NULL); + const u32 *did = of_get_property(node, "device-id", NULL); if (*did == 0x00000025) type = macio_pangea; if (*did == 0x0000003e) @@ -2655,7 +2673,7 @@ static void __init probe_one_macio(const char *name, const char *compat, int typ macio_chips[i].base = base; macio_chips[i].flags = MACIO_FLAG_SCCB_ON | MACIO_FLAG_SCCB_ON; macio_chips[i].name = macio_names[type]; - revp = get_property(node, "revision-id", NULL); + revp = of_get_property(node, "revision-id", NULL); if (revp) macio_chips[i].rev = *revp; printk(KERN_INFO "Found a %s mac-io controller, rev: %d, mapped at 0x%p\n", @@ -2706,8 +2724,8 @@ initial_serial_shutdown(struct device_node *np) int port_type = PMAC_SCC_ASYNC; int modem = 0; - slots = get_property(np, "slot-names", &len); - conn = get_property(np, "AAPL,connector", &len); + slots = of_get_property(np, "slot-names", &len); + conn = of_get_property(np, "AAPL,connector", &len); if (conn && (strcmp(conn, "infrared") == 0)) port_type = PMAC_SCC_IRDA; else if (device_is_compatible(np, "cobalt")) @@ -2735,12 +2753,14 @@ set_initial_features(void) * differenciate them all and since that hack was there for a long * time, I'll keep it around */ - if (macio_chips[0].type == macio_ohare && !find_devices("via-pmu")) { + if (macio_chips[0].type == macio_ohare) { struct macio_chip *macio = &macio_chips[0]; - MACIO_OUT32(OHARE_FCR, STARMAX_FEATURES); - } else if (macio_chips[0].type == macio_ohare) { - struct macio_chip *macio = &macio_chips[0]; - MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE); + np = of_find_node_by_name(NULL, "via-pmu"); + if (np) + MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE); + else + MACIO_OUT32(OHARE_FCR, STARMAX_FEATURES); + of_node_put(np); } else if (macio_chips[1].type == macio_ohare) { struct macio_chip *macio = &macio_chips[1]; MACIO_BIS(OHARE_FCR, OH_IOBUS_ENABLE); @@ -2833,14 +2853,13 @@ set_initial_features(void) } /* Switch airport off */ - np = find_devices("radio"); - while(np) { + for_each_node_by_name(np, "radio") { if (np && np->parent == macio_chips[0].of_node) { macio_chips[0].flags |= MACIO_FLAG_AIRPORT_ON; core99_airport_enable(np, 0, 0); } - np = np->next; } + of_node_put(np); } /* On all machines that support sound PM, switch sound off */ @@ -2860,16 +2879,12 @@ set_initial_features(void) #endif /* CONFIG_POWER4 */ /* On all machines, switch modem & serial ports off */ - np = find_devices("ch-a"); - while(np) { + for_each_node_by_name(np, "ch-a") initial_serial_shutdown(np); - np = np->next; - } - np = find_devices("ch-b"); - while(np) { + of_node_put(np); + for_each_node_by_name(np, "ch-b") initial_serial_shutdown(np); - np = np->next; - } + of_node_put(np); } void __init diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c index bfc4829162f1..5430e146b3e9 100644 --- a/arch/powerpc/platforms/powermac/low_i2c.c +++ b/arch/powerpc/platforms/powermac/low_i2c.c @@ -491,7 +491,7 @@ static struct pmac_i2c_host_kw *__init kw_i2c_host_init(struct device_node *np) * on all i2c keywest nodes so far ... we would have to fallback * to macio parsing if that wasn't the case */ - addrp = get_property(np, "AAPL,address", NULL); + addrp = of_get_property(np, "AAPL,address", NULL); if (addrp == NULL) { printk(KERN_ERR "low_i2c: Can't find address for %s\n", np->full_name); @@ -505,13 +505,13 @@ static struct pmac_i2c_host_kw *__init kw_i2c_host_init(struct device_node *np) host->timeout_timer.function = kw_i2c_timeout; host->timeout_timer.data = (unsigned long)host; - psteps = get_property(np, "AAPL,address-step", NULL); + psteps = of_get_property(np, "AAPL,address-step", NULL); steps = psteps ? (*psteps) : 0x10; for (host->bsteps = 0; (steps & 0x01) == 0; host->bsteps++) steps >>= 1; /* Select interface rate */ host->speed = KW_I2C_MODE_25KHZ; - prate = get_property(np, "AAPL,i2c-rate", NULL); + prate = of_get_property(np, "AAPL,i2c-rate", NULL); if (prate) switch(*prate) { case 100: host->speed = KW_I2C_MODE_100KHZ; @@ -619,7 +619,7 @@ static void __init kw_i2c_probe(void) } else { for (child = NULL; (child = of_get_next_child(np, child)) != NULL;) { - const u32 *reg = get_property(child, + const u32 *reg = of_get_property(child, "reg", NULL); if (reg == NULL) continue; @@ -905,7 +905,7 @@ static void __init smu_i2c_probe(void) if (strcmp(busnode->type, "i2c") && strcmp(busnode->type, "i2c-bus")) continue; - reg = get_property(busnode, "reg", NULL); + reg = of_get_property(busnode, "reg", NULL); if (reg == NULL) continue; @@ -950,7 +950,8 @@ struct pmac_i2c_bus *pmac_i2c_find_bus(struct device_node *node) if (p == bus->busnode) { if (prev && bus->flags & pmac_i2c_multibus) { const u32 *reg; - reg = get_property(prev, "reg", NULL); + reg = of_get_property(prev, "reg", + NULL); if (!reg) continue; if (((*reg) >> 8) != bus->channel) @@ -971,7 +972,7 @@ EXPORT_SYMBOL_GPL(pmac_i2c_find_bus); u8 pmac_i2c_get_dev_addr(struct device_node *device) { - const u32 *reg = get_property(device, "reg", NULL); + const u32 *reg = of_get_property(device, "reg", NULL); if (reg == NULL) return 0; diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c index 6fbac308ded6..22c4ae4c6934 100644 --- a/arch/powerpc/platforms/powermac/pci.c +++ b/arch/powerpc/platforms/powermac/pci.c @@ -70,11 +70,11 @@ static int __init fixup_one_level_bus_range(struct device_node *node, int higher int len; /* For PCI<->PCI bridges or CardBus bridges, we go down */ - class_code = get_property(node, "class-code", NULL); + class_code = of_get_property(node, "class-code", NULL); if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI && (*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) continue; - bus_range = get_property(node, "bus-range", &len); + bus_range = of_get_property(node, "bus-range", &len); if (bus_range != NULL && len > 2 * sizeof(int)) { if (bus_range[1] > higher) higher = bus_range[1]; @@ -100,7 +100,7 @@ static void __init fixup_bus_range(struct device_node *bridge) if (prop == NULL || prop->length < 2 * sizeof(int)) return; - bus_range = (int *)prop->value; + bus_range = prop->value; bus_range[1] = fixup_one_level_bus_range(bridge->child, bus_range[1]); } @@ -246,8 +246,8 @@ static int chaos_validate_dev(struct pci_bus *bus, int devfn, int offset) if (np == NULL) return PCIBIOS_DEVICE_NOT_FOUND; - vendor = get_property(np, "vendor-id", NULL); - device = get_property(np, "device-id", NULL); + vendor = of_get_property(np, "vendor-id", NULL); + device = of_get_property(np, "device-id", NULL); if (vendor == NULL || device == NULL) return PCIBIOS_DEVICE_NOT_FOUND; @@ -622,13 +622,14 @@ static void __init init_p2pbridge(void) /* XXX it would be better here to identify the specific PCI-PCI bridge chip we have. */ - if ((p2pbridge = find_devices("pci-bridge")) == 0 + p2pbridge = of_find_node_by_name(NULL, "pci-bridge"); + if (p2pbridge == NULL || p2pbridge->parent == NULL || strcmp(p2pbridge->parent->name, "pci") != 0) - return; + goto done; if (pci_device_from_OF_node(p2pbridge, &bus, &devfn) < 0) { DBG("Can't find PCI infos for PCI<->PCI bridge\n"); - return; + goto done; } /* Warning: At this point, we have not yet renumbered all busses. * So we must use OF walking to find out hose @@ -636,16 +637,18 @@ static void __init init_p2pbridge(void) hose = pci_find_hose_for_OF_device(p2pbridge); if (!hose) { DBG("Can't find hose for PCI<->PCI bridge\n"); - return; + goto done; } if (early_read_config_word(hose, bus, devfn, PCI_BRIDGE_CONTROL, &val) < 0) { printk(KERN_ERR "init_p2pbridge: couldn't read bridge" " control\n"); - return; + goto done; } val &= ~PCI_BRIDGE_CTL_MASTER_ABORT; early_write_config_word(hose, bus, devfn, PCI_BRIDGE_CONTROL, val); +done: + of_node_put(p2pbridge); } static void __init init_second_ohare(void) @@ -691,17 +694,17 @@ static void __init fixup_nec_usb2(void) const u32 *prop; u8 bus, devfn; - prop = get_property(nec, "vendor-id", NULL); + prop = of_get_property(nec, "vendor-id", NULL); if (prop == NULL) continue; if (0x1033 != *prop) continue; - prop = get_property(nec, "device-id", NULL); + prop = of_get_property(nec, "device-id", NULL); if (prop == NULL) continue; if (0x0035 != *prop) continue; - prop = get_property(nec, "reg", NULL); + prop = of_get_property(nec, "reg", NULL); if (prop == NULL) continue; devfn = (prop[0] >> 8) & 0xff; @@ -909,7 +912,7 @@ static int __init add_bridge(struct device_node *dev) has_address = (of_address_to_resource(dev, 0, &rsrc) == 0); /* Get bus range if any */ - bus_range = get_property(dev, "bus-range", &len); + bus_range = of_get_property(dev, "bus-range", &len); if (bus_range == NULL || len < 2 * sizeof(int)) { printk(KERN_WARNING "Can't get bus-range for %s, assume" " bus 0\n", dev->full_name); @@ -1199,8 +1202,7 @@ void __init pmac_pcibios_after_init(void) } #endif /* CONFIG_BLK_DEV_IDE */ - nd = find_devices("firewire"); - while (nd) { + for_each_node_by_name(nd, "firewire") { if (nd->parent && (device_is_compatible(nd, "pci106b,18") || device_is_compatible(nd, "pci106b,30") || device_is_compatible(nd, "pci11c1,5811")) @@ -1208,15 +1210,14 @@ void __init pmac_pcibios_after_init(void) pmac_call_feature(PMAC_FTR_1394_ENABLE, nd, 0, 0); pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, nd, 0, 0); } - nd = nd->next; } - nd = find_devices("ethernet"); - while (nd) { + of_node_put(nd); + for_each_node_by_name(nd, "ethernet") { if (nd->parent && device_is_compatible(nd, "gmac") && device_is_compatible(nd->parent, "uni-north")) pmac_call_feature(PMAC_FTR_GMAC_ENABLE, nd, 0, 0); - nd = nd->next; } + of_node_put(nd); } #ifdef CONFIG_PPC32 diff --git a/arch/powerpc/platforms/powermac/pfunc_base.c b/arch/powerpc/platforms/powermac/pfunc_base.c index 5c6c15c5f9a3..45d54b9ad9e0 100644 --- a/arch/powerpc/platforms/powermac/pfunc_base.c +++ b/arch/powerpc/platforms/powermac/pfunc_base.c @@ -114,7 +114,7 @@ static void macio_gpio_init_one(struct macio_chip *macio) * we just create them all */ for (gp = NULL; (gp = of_get_next_child(gparent, gp)) != NULL;) { - const u32 *reg = get_property(gp, "reg", NULL); + const u32 *reg = of_get_property(gp, "reg", NULL); unsigned long offset; if (reg == NULL) continue; diff --git a/arch/powerpc/platforms/powermac/pfunc_core.c b/arch/powerpc/platforms/powermac/pfunc_core.c index 7651f278615a..85434231ae14 100644 --- a/arch/powerpc/platforms/powermac/pfunc_core.c +++ b/arch/powerpc/platforms/powermac/pfunc_core.c @@ -692,8 +692,7 @@ static int pmf_add_functions(struct pmf_device *dev, void *driverdata) name = pp->name + plen; if (strlen(name) && pp->length >= 12) count += pmf_add_function_prop(dev, driverdata, name, - (u32 *)pp->value, - pp->length); + pp->value, pp->length); } return count; } @@ -821,7 +820,7 @@ struct pmf_function *__pmf_find_function(struct device_node *target, * one, then we fallback to a direct call attempt */ snprintf(fname, 63, "platform-%s", name); - prop = get_property(target, fname, NULL); + prop = of_get_property(target, fname, NULL); if (prop == NULL) goto find_it; ph = *prop; diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c index 5e5c0e4add91..ae5097ac0378 100644 --- a/arch/powerpc/platforms/powermac/pic.c +++ b/arch/powerpc/platforms/powermac/pic.c @@ -482,14 +482,14 @@ static struct mpic * __init pmac_setup_one_mpic(struct device_node *np, pmac_call_feature(PMAC_FTR_ENABLE_MPIC, np, 0, 0); flags |= MPIC_WANTS_RESET; - if (get_property(np, "big-endian", NULL)) + if (of_get_property(np, "big-endian", NULL)) flags |= MPIC_BIG_ENDIAN; /* Primary Big Endian means HT interrupts. This is quite dodgy * but works until I find a better way */ if (master && (flags & MPIC_BIG_ENDIAN)) - flags |= MPIC_BROKEN_U3; + flags |= MPIC_U3_HT_IRQS; mpic = mpic_alloc(np, r.start, flags, 0, 0, name); if (mpic == NULL) @@ -510,7 +510,7 @@ static int __init pmac_pic_probe_mpic(void) for (np = NULL; (np = of_find_node_by_type(np, "open-pic")) != NULL;) { if (master == NULL && - get_property(np, "interrupts", NULL) == NULL) + of_get_property(np, "interrupts", NULL) == NULL) master = of_node_get(np); else if (slave == NULL) slave = of_node_get(np); @@ -575,7 +575,7 @@ void __init pmac_pic_init(void) #ifdef CONFIG_PPC32 if (!pmac_newworld) flags |= OF_IMAP_OLDWORLD_MAC; - if (get_property(of_chosen, "linux,bootx", NULL) != NULL) + if (of_get_property(of_chosen, "linux,bootx", NULL) != NULL) flags |= OF_IMAP_NO_PHANDLE; #endif /* CONFIG_PPC_32 */ diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c index 651fa424ea06..b820cabac697 100644 --- a/arch/powerpc/platforms/powermac/setup.c +++ b/arch/powerpc/platforms/powermac/setup.c @@ -42,7 +42,6 @@ #include <linux/initrd.h> #include <linux/vt_kern.h> #include <linux/console.h> -#include <linux/ide.h> #include <linux/pci.h> #include <linux/adb.h> #include <linux/cuda.h> @@ -135,12 +134,12 @@ static void pmac_show_cpuinfo(struct seq_file *m) seq_printf(m, "machine\t\t: "); np = of_find_node_by_path("/"); if (np != NULL) { - pp = get_property(np, "model", NULL); + pp = of_get_property(np, "model", NULL); if (pp != NULL) seq_printf(m, "%s\n", pp); else seq_printf(m, "PowerMac\n"); - pp = get_property(np, "compatible", &plen); + pp = of_get_property(np, "compatible", &plen); if (pp != NULL) { seq_printf(m, "motherboard\t:"); while (plen > 0) { @@ -164,11 +163,13 @@ static void pmac_show_cpuinfo(struct seq_file *m) if (np == NULL) np = of_find_node_by_type(NULL, "cache"); if (np != NULL) { - const unsigned int *ic = get_property(np, "i-cache-size", NULL); - const unsigned int *dc = get_property(np, "d-cache-size", NULL); + const unsigned int *ic = + of_get_property(np, "i-cache-size", NULL); + const unsigned int *dc = + of_get_property(np, "d-cache-size", NULL); seq_printf(m, "L2 cache\t:"); has_l2cache = 1; - if (get_property(np, "cache-unified", NULL) != 0 && dc) { + if (of_get_property(np, "cache-unified", NULL) != 0 && dc) { seq_printf(m, " %dK unified", *dc / 1024); } else { if (ic) @@ -177,7 +178,7 @@ static void pmac_show_cpuinfo(struct seq_file *m) seq_printf(m, "%s %dK data", (ic? " +": ""), *dc / 1024); } - pp = get_property(np, "ram-type", NULL); + pp = of_get_property(np, "ram-type", NULL); if (pp) seq_printf(m, " %s", pp); seq_printf(m, "\n"); @@ -192,8 +193,11 @@ static void pmac_show_cpuinfo(struct seq_file *m) #ifndef CONFIG_ADB_CUDA int find_via_cuda(void) { - if (!find_devices("via-cuda")) + struct device_node *dn = of_find_node_by_name(NULL, "via-cuda"); + + if (!dn) return 0; + of_node_put(dn); printk("WARNING ! Your machine is CUDA-based but your kernel\n"); printk(" wasn't compiled with CONFIG_ADB_CUDA option !\n"); return 0; @@ -203,8 +207,11 @@ int find_via_cuda(void) #ifndef CONFIG_ADB_PMU int find_via_pmu(void) { - if (!find_devices("via-pmu")) + struct device_node *dn = of_find_node_by_name(NULL, "via-pmu"); + + if (!dn) return 0; + of_node_put(dn); printk("WARNING ! Your machine is PMU-based but your kernel\n"); printk(" wasn't compiled with CONFIG_ADB_PMU option !\n"); return 0; @@ -224,6 +231,8 @@ static volatile u32 *sysctrl_regs; static void __init ohare_init(void) { + struct device_node *dn; + /* this area has the CPU identification register and some registers used by smp boards */ sysctrl_regs = (volatile u32 *) ioremap(0xf8000000, 0x1000); @@ -233,7 +242,9 @@ static void __init ohare_init(void) * We assume that we have a PSX memory controller iff * we have an ohare I/O controller. */ - if (find_devices("ohare") != NULL) { + dn = of_find_node_by_name(NULL, "ohare"); + if (dn) { + of_node_put(dn); if (((sysctrl_regs[2] >> 24) & 0xf) >= 3) { if (sysctrl_regs[4] & 0x10) sysctrl_regs[4] |= 0x04000020; @@ -249,18 +260,19 @@ static void __init l2cr_init(void) { /* Checks "l2cr-value" property in the registry */ if (cpu_has_feature(CPU_FTR_L2CR)) { - struct device_node *np = find_devices("cpus"); + struct device_node *np = of_find_node_by_name(NULL, "cpus"); if (np == 0) - np = find_type_devices("cpu"); + np = of_find_node_by_type(NULL, "cpu"); if (np != 0) { const unsigned int *l2cr = - get_property(np, "l2cr-value", NULL); + of_get_property(np, "l2cr-value", NULL); if (l2cr != 0) { ppc_override_l2cr = 1; ppc_override_l2cr_value = *l2cr; _set_L2CR(0); _set_L2CR(ppc_override_l2cr_value); } + of_node_put(np); } } @@ -286,7 +298,7 @@ static void __init pmac_setup_arch(void) loops_per_jiffy = 50000000 / HZ; cpu = of_find_node_by_type(NULL, "cpu"); if (cpu != NULL) { - fp = get_property(cpu, "clock-frequency", NULL); + fp = of_get_property(cpu, "clock-frequency", NULL); if (fp != NULL) { if (pvr >= 0x30 && pvr < 0x80) /* PPC970 etc. */ @@ -303,7 +315,7 @@ static void __init pmac_setup_arch(void) /* See if newworld or oldworld */ for (ic = NULL; (ic = of_find_all_nodes(ic)) != NULL; ) - if (get_property(ic, "interrupt-controller", NULL)) + if (of_get_property(ic, "interrupt-controller", NULL)) break; if (ic) { pmac_newworld = 1; @@ -341,8 +353,15 @@ static void __init pmac_setup_arch(void) #ifdef CONFIG_SMP /* Check for Core99 */ - if (find_devices("uni-n") || find_devices("u3") || find_devices("u4")) + ic = of_find_node_by_name(NULL, "uni-n"); + if (!ic) + ic = of_find_node_by_name(NULL, "u3"); + if (!ic) + ic = of_find_node_by_name(NULL, "u4"); + if (ic) { + of_node_put(ic); smp_ops = &core99_smp_ops; + } #ifdef CONFIG_PPC32 else smp_ops = &psurge_smp_ops; @@ -616,15 +635,6 @@ static void __init pmac_init_early(void) #endif } -/* - * pmac has no legacy IO, anything calling this function has to - * fail or bad things will happen - */ -static int pmac_check_legacy_ioport(unsigned int baseport) -{ - return -ENODEV; -} - static int __init pmac_declare_of_platform_devices(void) { struct device_node *np; @@ -736,7 +746,6 @@ define_machine(powermac) { .get_rtc_time = pmac_get_rtc_time, .calibrate_decr = pmac_calibrate_decr, .feature_call = pmac_do_feature_call, - .check_legacy_ioport = pmac_check_legacy_ioport, .progress = udbg_progress, #ifdef CONFIG_PPC64 .pci_probe_mode = pmac_pci_probe_mode, diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c index d73fb73802bb..6f32c4eca6e5 100644 --- a/arch/powerpc/platforms/powermac/smp.c +++ b/arch/powerpc/platforms/powermac/smp.c @@ -264,6 +264,7 @@ static void __init psurge_quad_init(void) static int __init smp_psurge_probe(void) { int i, ncpus; + struct device_node *dn; /* We don't do SMP on the PPC601 -- paulus */ if (PVR_VER(mfspr(SPRN_PVR)) == 1) @@ -279,8 +280,10 @@ static int __init smp_psurge_probe(void) * in the hammerhead memory controller in the case of the * dual-cpu powersurge board. -- paulus. */ - if (find_devices("hammerhead") == NULL) + dn = of_find_node_by_name(NULL, "hammerhead"); + if (dn == NULL) return 1; + of_node_put(dn); hhead_base = ioremap(HAMMERHEAD_BASE, 0x800); quad_base = ioremap(PSURGE_QUAD_REG_ADDR, 1024); @@ -567,7 +570,7 @@ static void __init smp_core99_setup_i2c_hwsync(int ncpus) pmac_tb_clock_chip_host = pmac_i2c_find_bus(cc); if (pmac_tb_clock_chip_host == NULL) continue; - reg = get_property(cc, "reg", NULL); + reg = of_get_property(cc, "reg", NULL); if (reg == NULL) continue; switch (*reg) { @@ -695,7 +698,7 @@ static void __init smp_core99_setup(int ncpus) struct device_node *cpus = of_find_node_by_path("/cpus"); if (cpus && - get_property(cpus, "platform-cpu-timebase", NULL)) { + of_get_property(cpus, "platform-cpu-timebase", NULL)) { pmac_tb_freeze = smp_core99_pfunc_tb_freeze; printk(KERN_INFO "Processor timebase sync using" " platform function\n"); @@ -712,7 +715,7 @@ static void __init smp_core99_setup(int ncpus) core99_tb_gpio = KL_GPIO_TB_ENABLE; /* default value */ cpu = of_find_node_by_type(NULL, "cpu"); if (cpu != NULL) { - tbprop = get_property(cpu, "timebase-enable", NULL); + tbprop = of_get_property(cpu, "timebase-enable", NULL); if (tbprop) core99_tb_gpio = *tbprop; of_node_put(cpu); diff --git a/arch/powerpc/platforms/powermac/time.c b/arch/powerpc/platforms/powermac/time.c index a4173906e945..bf9da56942e8 100644 --- a/arch/powerpc/platforms/powermac/time.c +++ b/arch/powerpc/platforms/powermac/time.c @@ -297,49 +297,11 @@ int __init via_calibrate_decr(void) } #endif -#ifdef CONFIG_PM -/* - * Reset the time after a sleep. - */ -static int -time_sleep_notify(struct pmu_sleep_notifier *self, int when) -{ - static unsigned long time_diff; - unsigned long flags; - unsigned long seq; - struct timespec tv; - - switch (when) { - case PBOOK_SLEEP_NOW: - do { - seq = read_seqbegin_irqsave(&xtime_lock, flags); - time_diff = xtime.tv_sec - pmac_get_boot_time(); - } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); - break; - case PBOOK_WAKE: - tv.tv_sec = pmac_get_boot_time() + time_diff; - tv.tv_nsec = 0; - do_settimeofday(&tv); - break; - } - return PBOOK_SLEEP_OK; -} - -static struct pmu_sleep_notifier time_sleep_notifier = { - time_sleep_notify, SLEEP_LEVEL_MISC, -}; -#endif /* CONFIG_PM */ - /* * Query the OF and get the decr frequency. */ void __init pmac_calibrate_decr(void) { -#if defined(CONFIG_PM) && defined(CONFIG_ADB_PMU) - /* XXX why here? */ - pmu_register_sleep_notifier(&time_sleep_notifier); -#endif - generic_calibrate_decr(); #ifdef CONFIG_PPC32 diff --git a/arch/powerpc/platforms/powermac/udbg_scc.c b/arch/powerpc/platforms/powermac/udbg_scc.c index 379db05b0082..47de4d3fc167 100644 --- a/arch/powerpc/platforms/powermac/udbg_scc.c +++ b/arch/powerpc/platforms/powermac/udbg_scc.c @@ -81,7 +81,7 @@ void udbg_scc_init(int force_scc) macio = of_get_parent(escc); if (macio == NULL) goto bail; - path = get_property(of_chosen, "linux,stdout-path", NULL); + path = of_get_property(of_chosen, "linux,stdout-path", NULL); if (path != NULL) stdout = of_find_node_by_path(path); for (ch = NULL; (ch = of_get_next_child(escc, ch)) != NULL;) { @@ -96,13 +96,13 @@ void udbg_scc_init(int force_scc) ch = ch_def ? ch_def : ch_a; /* Get address within mac-io ASIC */ - reg = get_property(escc, "reg", NULL); + reg = of_get_property(escc, "reg", NULL); if (reg == NULL) goto bail; addr = reg[0]; /* Get address of mac-io PCI itself */ - reg = get_property(macio, "assigned-addresses", NULL); + reg = of_get_property(macio, "assigned-addresses", NULL); if (reg == NULL) goto bail; addr += reg[2]; diff --git a/arch/powerpc/platforms/prep/Kconfig b/arch/powerpc/platforms/prep/Kconfig index 673ac47a1626..29d411279b0c 100644 --- a/arch/powerpc/platforms/prep/Kconfig +++ b/arch/powerpc/platforms/prep/Kconfig @@ -1,3 +1,12 @@ +config PPC_PREP + bool "PowerPC Reference Platform (PReP) based machines" + depends on PPC_MULTIPLATFORM && PPC32 && BROKEN + select MPIC + select PPC_I8259 + select PPC_INDIRECT_PCI + select PPC_UDBG_16550 + select PPC_NATIVE + default n config PREP_RESIDUAL bool "Support for PReP Residual Data" diff --git a/arch/powerpc/platforms/ps3/Kconfig b/arch/powerpc/platforms/ps3/Kconfig index 1a481a60a883..40f0008af4d1 100644 --- a/arch/powerpc/platforms/ps3/Kconfig +++ b/arch/powerpc/platforms/ps3/Kconfig @@ -1,3 +1,19 @@ +config PPC_PS3 + bool "Sony PS3 (incomplete)" + depends on PPC_MULTIPLATFORM && PPC64 + select PPC_CELL + select USB_ARCH_HAS_OHCI + select USB_OHCI_LITTLE_ENDIAN + select USB_OHCI_BIG_ENDIAN_MMIO + select USB_ARCH_HAS_EHCI + select USB_EHCI_BIG_ENDIAN_MMIO + help + This option enables support for the Sony PS3 game console + and other platforms using the PS3 hypervisor. + Support for this platform is not yet complete, so + enabling this will not result in a bootable kernel on a + PS3 system. + menu "PS3 Platform Options" depends on PPC_PS3 diff --git a/arch/powerpc/platforms/ps3/htab.c b/arch/powerpc/platforms/ps3/htab.c index e12e59fea13a..ea60c451cf87 100644 --- a/arch/powerpc/platforms/ps3/htab.c +++ b/arch/powerpc/platforms/ps3/htab.c @@ -39,7 +39,7 @@ static unsigned long htab_addr; static unsigned char *bolttab; static unsigned char *inusetab; -static spinlock_t ps3_bolttab_lock = SPIN_LOCK_UNLOCKED; +static DEFINE_SPINLOCK(ps3_bolttab_lock); #define debug_dump_hpte(_a, _b, _c, _d, _e, _f, _g) \ _debug_dump_hpte(_a, _b, _c, _d, _e, _f, _g, __func__, __LINE__) diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig index a57032cf6f1b..16e4e401b820 100644 --- a/arch/powerpc/platforms/pseries/Kconfig +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -1,3 +1,13 @@ +config PPC_PSERIES + depends on PPC_MULTIPLATFORM && PPC64 + bool "IBM pSeries & new (POWER5-based) iSeries" + select MPIC + select PPC_I8259 + select PPC_RTAS + select RTAS_ERROR_LOGGING + select PPC_UDBG_16550 + select PPC_NATIVE + default y config PPC_SPLPAR depends on PPC_PSERIES diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile index 2dfd05095a25..90235d598751 100644 --- a/arch/powerpc/platforms/pseries/Makefile +++ b/arch/powerpc/platforms/pseries/Makefile @@ -2,14 +2,15 @@ ifeq ($(CONFIG_PPC64),y) EXTRA_CFLAGS += -mno-minimal-toc endif -obj-y := pci.o lpar.o hvCall.o nvram.o reconfig.o \ - setup.o iommu.o ras.o rtasd.o pci_dlpar.o \ +obj-y := lpar.o hvCall.o nvram.o reconfig.o \ + setup.o iommu.o ras.o rtasd.o \ firmware.o power.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_XICS) += xics.o obj-$(CONFIG_SCANLOG) += scanlog.o obj-$(CONFIG_EEH) += eeh.o eeh_cache.o eeh_driver.o eeh_event.o obj-$(CONFIG_KEXEC) += kexec.o +obj-$(CONFIG_PCI) += pci.o pci_dlpar.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug-cpu.o diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index 6cedbc002e0f..48fbd442e9df 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -74,7 +74,10 @@ * is broken and panic. This sets the threshold for how many read * attempts we allow before panicking. */ -#define EEH_MAX_FAILS 100000 +#define EEH_MAX_FAILS 2100000 + +/* Time to wait for a PCI slot to retport status, in milliseconds */ +#define PCI_BUS_RESET_WAIT_MSEC (60*1000) /* RTAS tokens */ static int ibm_set_eeh_option; @@ -83,6 +86,7 @@ static int ibm_read_slot_reset_state; static int ibm_read_slot_reset_state2; static int ibm_slot_error_detail; static int ibm_get_config_addr_info; +static int ibm_get_config_addr_info2; static int ibm_configure_bridge; int eeh_subsystem_enabled; @@ -168,6 +172,55 @@ static int read_slot_reset_state(struct pci_dn *pdn, int rets[]) } /** + * eeh_wait_for_slot_status - returns error status of slot + * @pdn pci device node + * @max_wait_msecs maximum number to millisecs to wait + * + * Return negative value if a permanent error, else return + * Partition Endpoint (PE) status value. + * + * If @max_wait_msecs is positive, then this routine will + * sleep until a valid status can be obtained, or until + * the max allowed wait time is exceeded, in which case + * a -2 is returned. + */ +int +eeh_wait_for_slot_status(struct pci_dn *pdn, int max_wait_msecs) +{ + int rc; + int rets[3]; + int mwait; + + while (1) { + rc = read_slot_reset_state(pdn, rets); + if (rc) return rc; + if (rets[1] == 0) return -1; /* EEH is not supported */ + + if (rets[0] != 5) return rets[0]; /* return actual status */ + + if (rets[2] == 0) return -1; /* permanently unavailable */ + + if (max_wait_msecs <= 0) return -1; + + mwait = rets[2]; + if (mwait <= 0) { + printk (KERN_WARNING + "EEH: Firmware returned bad wait value=%d\n", mwait); + mwait = 1000; + } else if (mwait > 300*1000) { + printk (KERN_WARNING + "EEH: Firmware is taking too long, time=%d\n", mwait); + mwait = 300*1000; + } + max_wait_msecs -= mwait; + msleep (mwait); + } + + printk(KERN_WARNING "EEH: Timed out waiting for slot status\n"); + return -2; +} + +/** * eeh_token_to_phys - convert EEH address token to phys address * @token i/o token, should be address in the form 0xA.... */ @@ -229,7 +282,7 @@ void eeh_mark_slot (struct device_node *dn, int mode_flag) dn = find_device_pe (dn); /* Back up one, since config addrs might be shared */ - if (PCI_DN(dn) && PCI_DN(dn)->eeh_pe_config_addr) + if (!pcibios_find_pci_bus(dn) && PCI_DN(dn->parent)) dn = dn->parent; PCI_DN(dn)->eeh_mode |= mode_flag; @@ -263,7 +316,7 @@ void eeh_clear_slot (struct device_node *dn, int mode_flag) dn = find_device_pe (dn); /* Back up one, since config addrs might be shared */ - if (PCI_DN(dn) && PCI_DN(dn)->eeh_pe_config_addr) + if (!pcibios_find_pci_bus(dn) && PCI_DN(dn->parent)) dn = dn->parent; PCI_DN(dn)->eeh_mode &= ~mode_flag; @@ -293,7 +346,6 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) int rets[3]; unsigned long flags; struct pci_dn *pdn; - enum pci_channel_state state; int rc = 0; total_mmio_ffs++; @@ -367,25 +419,25 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) goto dn_unlock; } - /* If EEH is not supported on this device, punt. */ - if (rets[1] != 1) { - printk(KERN_WARNING "EEH: event on unsupported device, rc=%d dn=%s\n", - ret, dn->full_name); + /* Note that config-io to empty slots may fail; + * they are empty when they don't have children. */ + if ((rets[0] == 5) && (dn->child == NULL)) { false_positives++; rc = 0; goto dn_unlock; } - /* If not the kind of error we know about, punt. */ - if (rets[0] != 2 && rets[0] != 4 && rets[0] != 5) { + /* If EEH is not supported on this device, punt. */ + if (rets[1] != 1) { + printk(KERN_WARNING "EEH: event on unsupported device, rc=%d dn=%s\n", + ret, dn->full_name); false_positives++; rc = 0; goto dn_unlock; } - /* Note that config-io to empty slots may fail; - * we recognize empty because they don't have children. */ - if ((rets[0] == 5) && (dn->child == NULL)) { + /* If not the kind of error we know about, punt. */ + if (rets[0] != 1 && rets[0] != 2 && rets[0] != 4 && rets[0] != 5) { false_positives++; rc = 0; goto dn_unlock; @@ -399,17 +451,12 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) eeh_mark_slot (dn, EEH_MODE_ISOLATED); spin_unlock_irqrestore(&confirm_error_lock, flags); - state = pci_channel_io_normal; - if ((rets[0] == 2) || (rets[0] == 4)) - state = pci_channel_io_frozen; - if (rets[0] == 5) - state = pci_channel_io_perm_failure; - eeh_send_failure_event (dn, dev, state, rets[2]); + eeh_send_failure_event (dn, dev); /* Most EEH events are due to device driver bugs. Having * a stack trace will help the device-driver authors figure * out what happened. So print that out. */ - if (rets[0] != 5) dump_stack(); + dump_stack(); return 1; dn_unlock: @@ -458,38 +505,6 @@ EXPORT_SYMBOL(eeh_check_failure); /* The code below deals with error recovery */ /** - * eeh_slot_availability - returns error status of slot - * @pdn pci device node - * - * Return negative value if a permanent error, else return - * a number of milliseconds to wait until the PCI slot is - * ready to be used. - */ -static int -eeh_slot_availability(struct pci_dn *pdn) -{ - int rc; - int rets[3]; - - rc = read_slot_reset_state(pdn, rets); - - if (rc) return rc; - - if (rets[1] == 0) return -1; /* EEH is not supported */ - if (rets[0] == 0) return 0; /* Oll Korrect */ - if (rets[0] == 5) { - if (rets[2] == 0) return -1; /* permanently unavailable */ - return rets[2]; /* number of millisecs to wait */ - } - if (rets[0] == 1) - return 250; - - printk (KERN_ERR "EEH: Slot unavailable: rc=%d, rets=%d %d %d\n", - rc, rets[0], rets[1], rets[2]); - return -2; -} - -/** * rtas_pci_enable - enable MMIO or DMA transfers for this slot * @pdn pci device node */ @@ -512,9 +527,13 @@ rtas_pci_enable(struct pci_dn *pdn, int function) function); if (rc) - printk(KERN_WARNING "EEH: Cannot enable function %d, err=%d dn=%s\n", + printk(KERN_WARNING "EEH: Unexpected state change %d, err=%d dn=%s\n", function, rc, pdn->node->full_name); + rc = eeh_wait_for_slot_status (pdn, PCI_BUS_RESET_WAIT_MSEC); + if ((rc == 4) && (function == EEH_THAW_MMIO)) + return 0; + return rc; } @@ -595,36 +614,24 @@ int rtas_set_slot_reset(struct pci_dn *pdn) { int i, rc; - __rtas_set_slot_reset(pdn); + /* Take three shots at resetting the bus */ + for (i=0; i<3; i++) { + __rtas_set_slot_reset(pdn); - /* Now double check with the firmware to make sure the device is - * ready to be used; if not, wait for recovery. */ - for (i=0; i<10; i++) { - rc = eeh_slot_availability (pdn); + rc = eeh_wait_for_slot_status(pdn, PCI_BUS_RESET_WAIT_MSEC); if (rc == 0) return 0; - if (rc == -2) { - printk (KERN_ERR "EEH: failed (%d) to reset slot %s\n", - i, pdn->node->full_name); - __rtas_set_slot_reset(pdn); - continue; - } - if (rc < 0) { printk (KERN_ERR "EEH: unrecoverable slot failure %s\n", pdn->node->full_name); return -1; } - - msleep (rc+100); + printk (KERN_ERR "EEH: bus reset %d failed on slot %s\n", + i+1, pdn->node->full_name); } - rc = eeh_slot_availability (pdn); - if (rc) - printk (KERN_ERR "EEH: timeout resetting slot %s\n", pdn->node->full_name); - - return rc; + return -1; } /* ------------------------------------------------------- */ @@ -744,16 +751,48 @@ struct eeh_early_enable_info { unsigned int buid_lo; }; +static int get_pe_addr (int config_addr, + struct eeh_early_enable_info *info) +{ + unsigned int rets[3]; + int ret; + + /* Use latest config-addr token on power6 */ + if (ibm_get_config_addr_info2 != RTAS_UNKNOWN_SERVICE) { + /* Make sure we have a PE in hand */ + ret = rtas_call (ibm_get_config_addr_info2, 4, 2, rets, + config_addr, info->buid_hi, info->buid_lo, 1); + if (ret || (rets[0]==0)) + return 0; + + ret = rtas_call (ibm_get_config_addr_info2, 4, 2, rets, + config_addr, info->buid_hi, info->buid_lo, 0); + if (ret) + return 0; + return rets[0]; + } + + /* Use older config-addr token on power5 */ + if (ibm_get_config_addr_info != RTAS_UNKNOWN_SERVICE) { + ret = rtas_call (ibm_get_config_addr_info, 4, 2, rets, + config_addr, info->buid_hi, info->buid_lo, 0); + if (ret) + return 0; + return rets[0]; + } + return 0; +} + /* Enable eeh for the given device node. */ static void *early_enable_eeh(struct device_node *dn, void *data) { unsigned int rets[3]; struct eeh_early_enable_info *info = data; int ret; - const char *status = get_property(dn, "status", NULL); - const u32 *class_code = get_property(dn, "class-code", NULL); - const u32 *vendor_id = get_property(dn, "vendor-id", NULL); - const u32 *device_id = get_property(dn, "device-id", NULL); + const char *status = of_get_property(dn, "status", NULL); + const u32 *class_code = of_get_property(dn, "class-code", NULL); + const u32 *vendor_id = of_get_property(dn, "vendor-id", NULL); + const u32 *device_id = of_get_property(dn, "device-id", NULL); const u32 *regs; int enable; struct pci_dn *pdn = PCI_DN(dn); @@ -796,7 +835,7 @@ static void *early_enable_eeh(struct device_node *dn, void *data) /* Ok... see if this device supports EEH. Some do, some don't, * and the only way to find out is to check each and every one. */ - regs = get_property(dn, "reg", NULL); + regs = of_get_property(dn, "reg", NULL); if (regs) { /* First register entry is addr (00BBSS00) */ /* Try to enable eeh */ @@ -810,15 +849,7 @@ static void *early_enable_eeh(struct device_node *dn, void *data) /* If the newer, better, ibm,get-config-addr-info is supported, * then use that instead. */ - pdn->eeh_pe_config_addr = 0; - if (ibm_get_config_addr_info != RTAS_UNKNOWN_SERVICE) { - ret = rtas_call (ibm_get_config_addr_info, 4, 2, rets, - pdn->eeh_config_addr, - info->buid_hi, info->buid_lo, - 0); - if (ret == 0) - pdn->eeh_pe_config_addr = rets[0]; - } + pdn->eeh_pe_config_addr = get_pe_addr(pdn->eeh_config_addr, info); /* Some older systems (Power4) allow the * ibm,set-eeh-option call to succeed even on nodes @@ -889,6 +920,7 @@ void __init eeh_init(void) ibm_read_slot_reset_state = rtas_token("ibm,read-slot-reset-state"); ibm_slot_error_detail = rtas_token("ibm,slot-error-detail"); ibm_get_config_addr_info = rtas_token("ibm,get-config-addr-info"); + ibm_get_config_addr_info2 = rtas_token("ibm,get-config-addr-info2"); ibm_configure_bridge = rtas_token ("ibm,configure-bridge"); if (ibm_set_eeh_option == RTAS_UNKNOWN_SERVICE) diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c index a4c0bf84ef2e..3170e003f76a 100644 --- a/arch/powerpc/platforms/pseries/eeh_driver.c +++ b/arch/powerpc/platforms/pseries/eeh_driver.c @@ -158,7 +158,8 @@ static void eeh_report_reset(struct pci_dev *dev, void *userdata) return; rc = driver->err_handler->slot_reset(dev); - if (*res == PCI_ERS_RESULT_NONE) *res = rc; + if ((*res == PCI_ERS_RESULT_NONE) || + (*res == PCI_ERS_RESULT_RECOVERED)) *res = rc; if (*res == PCI_ERS_RESULT_DISCONNECT && rc == PCI_ERS_RESULT_NEED_RESET) *res = rc; } @@ -248,6 +249,7 @@ static void eeh_report_failure(struct pci_dev *dev, void *userdata) static int eeh_reset_device (struct pci_dn *pe_dn, struct pci_bus *bus) { + struct device_node *dn; int cnt, rc; /* pcibios will clear the counter; save the value */ @@ -263,23 +265,20 @@ static int eeh_reset_device (struct pci_dn *pe_dn, struct pci_bus *bus) if (rc) return rc; - /* New-style config addrs might be shared across multiple devices, - * Walk over all functions on this device */ - if (pe_dn->eeh_pe_config_addr) { - struct device_node *pe = pe_dn->node; - pe = pe->parent->child; - while (pe) { - struct pci_dn *ppe = PCI_DN(pe); - if (pe_dn->eeh_pe_config_addr == ppe->eeh_pe_config_addr) { - rtas_configure_bridge(ppe); - eeh_restore_bars(ppe); - } - pe = pe->sibling; + /* Walk over all functions on this device. */ + dn = pe_dn->node; + if (!pcibios_find_pci_bus(dn) && PCI_DN(dn->parent)) + dn = dn->parent->child; + + while (dn) { + struct pci_dn *ppe = PCI_DN(dn); + /* On Power4, always true because eeh_pe_config_addr=0 */ + if (pe_dn->eeh_pe_config_addr == ppe->eeh_pe_config_addr) { + rtas_configure_bridge(ppe); + eeh_restore_bars(ppe); } - } else { - rtas_configure_bridge(pe_dn); - eeh_restore_bars(pe_dn); - } + dn = dn->sibling; + } /* Give the system 5 seconds to finish running the user-space * hotplug shutdown scripts, e.g. ifdown for ethernet. Yes, @@ -299,7 +298,7 @@ static int eeh_reset_device (struct pci_dn *pe_dn, struct pci_bus *bus) /* The longest amount of time to wait for a pci device * to come back on line, in seconds. */ -#define MAX_WAIT_FOR_RECOVERY 15 +#define MAX_WAIT_FOR_RECOVERY 150 struct pci_dn * handle_eeh_events (struct eeh_event *event) { @@ -315,14 +314,14 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event) if (!frozen_dn) { - location = get_property(event->dn, "ibm,loc-code", NULL); + location = of_get_property(event->dn, "ibm,loc-code", NULL); location = location ? location : "unknown"; printk(KERN_ERR "EEH: Error: Cannot find partition endpoint " "for location=%s pci addr=%s\n", location, pci_name(event->dev)); return NULL; } - location = get_property(frozen_dn, "ibm,loc-code", NULL); + location = of_get_property(frozen_dn, "ibm,loc-code", NULL); location = location ? location : "unknown"; /* There are two different styles for coming up with the PE. @@ -341,13 +340,6 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event) return NULL; } -#if 0 - /* We may get "permanent failure" messages on empty slots. - * These are false alarms. Empty slots have no child dn. */ - if ((event->state == pci_channel_io_perm_failure) && (frozen_device == NULL)) - return; -#endif - frozen_pdn = PCI_DN(frozen_dn); frozen_pdn->eeh_freeze_count++; @@ -362,13 +354,12 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event) if (frozen_pdn->eeh_freeze_count > EEH_MAX_ALLOWED_FREEZES) goto excess_failures; - /* If the reset state is a '5' and the time to reset is 0 (infinity) - * or is more then 15 seconds, then mark this as a permanent failure. - */ - if ((event->state == pci_channel_io_perm_failure) && - ((event->time_unavail <= 0) || - (event->time_unavail > MAX_WAIT_FOR_RECOVERY*1000))) + /* Get the current PCI slot state. */ + rc = eeh_wait_for_slot_status (frozen_pdn, MAX_WAIT_FOR_RECOVERY*1000); + if (rc < 0) { + printk(KERN_WARNING "EEH: Permanent failure\n"); goto hard_fail; + } eeh_slot_error_detail(frozen_pdn, 1 /* Temporary Error */); printk(KERN_WARNING @@ -390,14 +381,18 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event) */ if (result == PCI_ERS_RESULT_NONE) { rc = eeh_reset_device(frozen_pdn, frozen_bus); - if (rc) + if (rc) { + printk(KERN_WARNING "EEH: Unable to reset, rc=%d\n", rc); goto hard_fail; + } } /* If all devices reported they can proceed, then re-enable MMIO */ if (result == PCI_ERS_RESULT_CAN_RECOVER) { rc = rtas_pci_enable(frozen_pdn, EEH_THAW_MMIO); + if (rc < 0) + goto hard_fail; if (rc) { result = PCI_ERS_RESULT_NEED_RESET; } else { @@ -410,6 +405,8 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event) if (result == PCI_ERS_RESULT_CAN_RECOVER) { rc = rtas_pci_enable(frozen_pdn, EEH_THAW_DMA); + if (rc < 0) + goto hard_fail; if (rc) result = PCI_ERS_RESULT_NEED_RESET; else @@ -417,21 +414,28 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event) } /* If any device has a hard failure, then shut off everything. */ - if (result == PCI_ERS_RESULT_DISCONNECT) + if (result == PCI_ERS_RESULT_DISCONNECT) { + printk(KERN_WARNING "EEH: Device driver gave up\n"); goto hard_fail; + } /* If any device called out for a reset, then reset the slot */ if (result == PCI_ERS_RESULT_NEED_RESET) { rc = eeh_reset_device(frozen_pdn, NULL); - if (rc) + if (rc) { + printk(KERN_WARNING "EEH: Cannot reset, rc=%d\n", rc); goto hard_fail; + } result = PCI_ERS_RESULT_NONE; pci_walk_bus(frozen_bus, eeh_report_reset, &result); } /* All devices should claim they have recovered by now. */ - if (result != PCI_ERS_RESULT_RECOVERED) + if ((result != PCI_ERS_RESULT_RECOVERED) && + (result != PCI_ERS_RESULT_NONE)) { + printk(KERN_WARNING "EEH: Not recovered\n"); goto hard_fail; + } /* Tell all device drivers that they can resume operations */ pci_walk_bus(frozen_bus, eeh_report_resume, NULL); diff --git a/arch/powerpc/platforms/pseries/eeh_event.c b/arch/powerpc/platforms/pseries/eeh_event.c index 49037edf7d39..ddb80f5d850b 100644 --- a/arch/powerpc/platforms/pseries/eeh_event.c +++ b/arch/powerpc/platforms/pseries/eeh_event.c @@ -118,9 +118,7 @@ static void eeh_thread_launcher(struct work_struct *dummy) * (from a workqueue). */ int eeh_send_failure_event (struct device_node *dn, - struct pci_dev *dev, - enum pci_channel_state state, - int time_unavail) + struct pci_dev *dev) { unsigned long flags; struct eeh_event *event; @@ -128,7 +126,7 @@ int eeh_send_failure_event (struct device_node *dn, if (!mem_init_done) { printk(KERN_ERR "EEH: event during early boot not handled\n"); - location = get_property(dn, "ibm,loc-code", NULL); + location = of_get_property(dn, "ibm,loc-code", NULL); printk(KERN_ERR "EEH: device node = %s\n", dn->full_name); printk(KERN_ERR "EEH: PCI location = %s\n", location); return 1; @@ -144,8 +142,6 @@ int eeh_send_failure_event (struct device_node *dn, event->dn = dn; event->dev = dev; - event->state = state; - event->time_unavail = time_unavail; /* We may or may not be called in an interrupt context */ spin_lock_irqsave(&eeh_eventlist_lock, flags); diff --git a/arch/powerpc/platforms/pseries/firmware.c b/arch/powerpc/platforms/pseries/firmware.c index 90522e3c9d46..29bf83bfb1f0 100644 --- a/arch/powerpc/platforms/pseries/firmware.c +++ b/arch/powerpc/platforms/pseries/firmware.c @@ -80,7 +80,7 @@ void __init fw_feature_init(void) goto out; } - hypertas = get_property(dn, "ibm,hypertas-functions", &len); + hypertas = of_get_property(dn, "ibm,hypertas-functions", &len); if (hypertas == NULL) goto out; diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c index f460b9cbfd46..9711eb0d5496 100644 --- a/arch/powerpc/platforms/pseries/hotplug-cpu.c +++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c @@ -143,7 +143,7 @@ static int pseries_add_processor(struct device_node *np) int err = -ENOSPC, len, nthreads, i; const u32 *intserv; - intserv = get_property(np, "ibm,ppc-interrupt-server#s", &len); + intserv = of_get_property(np, "ibm,ppc-interrupt-server#s", &len); if (!intserv) return 0; @@ -203,7 +203,7 @@ static void pseries_remove_processor(struct device_node *np) int len, nthreads, i; const u32 *intserv; - intserv = get_property(np, "ibm,ppc-interrupt-server#s", &len); + intserv = of_get_property(np, "ibm,ppc-interrupt-server#s", &len); if (!intserv) return; diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c index e6653a868b91..66665c82415c 100644 --- a/arch/powerpc/platforms/pseries/iommu.c +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -242,6 +242,7 @@ static unsigned long tce_get_pSeriesLP(struct iommu_table *tbl, long tcenum) return tce_ret; } +#ifdef CONFIG_PCI static void iommu_table_setparms(struct pci_controller *phb, struct device_node *dn, struct iommu_table *tbl) @@ -252,8 +253,8 @@ static void iommu_table_setparms(struct pci_controller *phb, node = (struct device_node *)phb->arch_data; - basep = get_property(node, "linux,tce-base", NULL); - sizep = get_property(node, "linux,tce-size", NULL); + basep = of_get_property(node, "linux,tce-base", NULL); + sizep = of_get_property(node, "linux,tce-size", NULL); if (basep == NULL || sizep == NULL) { printk(KERN_ERR "PCI_DMA: iommu_table_setparms: %s has " "missing tce entries !\n", dn->full_name); @@ -403,7 +404,7 @@ static void pci_dma_bus_setup_pSeriesLP(struct pci_bus *bus) /* Find nearest ibm,dma-window, walking up the device tree */ for (pdn = dn; pdn != NULL; pdn = pdn->parent) { - dma_window = get_property(pdn, "ibm,dma-window", NULL); + dma_window = of_get_property(pdn, "ibm,dma-window", NULL); if (dma_window != NULL) break; } @@ -478,29 +479,6 @@ static void pci_dma_dev_setup_pSeries(struct pci_dev *dev) pci_name(dev)); } -static int iommu_reconfig_notifier(struct notifier_block *nb, unsigned long action, void *node) -{ - int err = NOTIFY_OK; - struct device_node *np = node; - struct pci_dn *pci = PCI_DN(np); - - switch (action) { - case PSERIES_RECONFIG_REMOVE: - if (pci && pci->iommu_table && - get_property(np, "ibm,dma-window", NULL)) - iommu_free_table(np); - break; - default: - err = NOTIFY_DONE; - break; - } - return err; -} - -static struct notifier_block iommu_reconfig_nb = { - .notifier_call = iommu_reconfig_notifier, -}; - static void pci_dma_dev_setup_pSeriesLP(struct pci_dev *dev) { struct device_node *pdn, *dn; @@ -521,7 +499,7 @@ static void pci_dma_dev_setup_pSeriesLP(struct pci_dev *dev) for (pdn = dn; pdn && PCI_DN(pdn) && !PCI_DN(pdn)->iommu_table; pdn = pdn->parent) { - dma_window = get_property(pdn, "ibm,dma-window", NULL); + dma_window = of_get_property(pdn, "ibm,dma-window", NULL); if (dma_window) break; } @@ -554,15 +532,44 @@ static void pci_dma_dev_setup_pSeriesLP(struct pci_dev *dev) dev->dev.archdata.dma_data = pci->iommu_table; } +#else /* CONFIG_PCI */ +#define pci_dma_bus_setup_pSeries NULL +#define pci_dma_dev_setup_pSeries NULL +#define pci_dma_bus_setup_pSeriesLP NULL +#define pci_dma_dev_setup_pSeriesLP NULL +#endif /* !CONFIG_PCI */ + +static int iommu_reconfig_notifier(struct notifier_block *nb, unsigned long action, void *node) +{ + int err = NOTIFY_OK; + struct device_node *np = node; + struct pci_dn *pci = PCI_DN(np); + + switch (action) { + case PSERIES_RECONFIG_REMOVE: + if (pci && pci->iommu_table && + of_get_property(np, "ibm,dma-window", NULL)) + iommu_free_table(np); + break; + default: + err = NOTIFY_DONE; + break; + } + return err; +} + +static struct notifier_block iommu_reconfig_nb = { + .notifier_call = iommu_reconfig_notifier, +}; /* These are called very early. */ void iommu_init_early_pSeries(void) { - if (of_chosen && get_property(of_chosen, "linux,iommu-off", NULL)) { + if (of_chosen && of_get_property(of_chosen, "linux,iommu-off", NULL)) { /* Direct I/O, IOMMU off */ ppc_md.pci_dma_dev_setup = NULL; ppc_md.pci_dma_bus_setup = NULL; - pci_dma_ops = &dma_direct_ops; + set_pci_dma_ops(&dma_direct_ops); return; } @@ -588,6 +595,6 @@ void iommu_init_early_pSeries(void) pSeries_reconfig_notifier_register(&iommu_reconfig_nb); - pci_dma_ops = &dma_iommu_ops; + set_pci_dma_ops(&dma_iommu_ops); } diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c index 843ee9643211..3a70e8ad7bc8 100644 --- a/arch/powerpc/platforms/pseries/lpar.c +++ b/arch/powerpc/platforms/pseries/lpar.c @@ -209,13 +209,13 @@ void __init find_udbg_vterm(void) /* find the boot console from /chosen/stdout */ if (!of_chosen) return; - name = get_property(of_chosen, "linux,stdout-path", NULL); + name = of_get_property(of_chosen, "linux,stdout-path", NULL); if (name == NULL) return; stdout_node = of_find_node_by_path(name); if (!stdout_node) return; - name = get_property(stdout_node, "name", NULL); + name = of_get_property(stdout_node, "name", NULL); if (!name) { printk(KERN_WARNING "stdout node missing 'name' property!\n"); goto out; @@ -226,7 +226,7 @@ void __init find_udbg_vterm(void) /* Check if it's a virtual terminal */ if (strncmp(name, "vty", 3) != 0) goto out; - termno = get_property(stdout_node, "reg", NULL); + termno = of_get_property(stdout_node, "reg", NULL); if (termno == NULL) goto out; vtermno = termno[0]; diff --git a/arch/powerpc/platforms/pseries/nvram.c b/arch/powerpc/platforms/pseries/nvram.c index 64163cecdf93..f68903e15bd5 100644 --- a/arch/powerpc/platforms/pseries/nvram.c +++ b/arch/powerpc/platforms/pseries/nvram.c @@ -130,7 +130,7 @@ int __init pSeries_nvram_init(void) if (nvram == NULL) return -ENODEV; - nbytes_p = get_property(nvram, "#bytes", &proplen); + nbytes_p = of_get_property(nvram, "#bytes", &proplen); if (nbytes_p == NULL || proplen != sizeof(unsigned int)) return -EIO; diff --git a/arch/powerpc/platforms/pseries/pci.c b/arch/powerpc/platforms/pseries/pci.c index fa59124ce3fe..2c6ded29f73d 100644 --- a/arch/powerpc/platforms/pseries/pci.c +++ b/arch/powerpc/platforms/pseries/pci.c @@ -25,6 +25,7 @@ #include <linux/pci.h> #include <linux/string.h> +#include <asm/eeh.h> #include <asm/pci-bridge.h> #include <asm/prom.h> #include <asm/ppc-pci.h> @@ -39,7 +40,7 @@ void pcibios_name_device(struct pci_dev *dev) */ dn = pci_device_to_OF_node(dev); if (dn) { - char *loc_code = get_property(dn, "ibm,loc-code", 0); + const char *loc_code = of_get_property(dn, "ibm,loc-code", 0); if (loc_code) { int loc_len = strlen(loc_code); if (loc_len < sizeof(dev->dev.name)) { diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c index ac56b868913a..fdc1a369f767 100644 --- a/arch/powerpc/platforms/pseries/pci_dlpar.c +++ b/arch/powerpc/platforms/pseries/pci_dlpar.c @@ -29,6 +29,7 @@ #include <asm/pci-bridge.h> #include <asm/ppc-pci.h> #include <asm/firmware.h> +#include <asm/eeh.h> static struct pci_bus * find_bus_among_children(struct pci_bus *bus, diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c index edc038873113..53aa04101ced 100644 --- a/arch/powerpc/platforms/pseries/ras.c +++ b/arch/powerpc/platforms/pseries/ras.c @@ -85,7 +85,7 @@ static void request_ras_irqs(struct device_node *np, * map those interrupts using the default interrupt host and default * trigger */ - opicprop = get_property(np, "open-pic-interrupt", &opicplen); + opicprop = of_get_property(np, "open-pic-interrupt", &opicplen); if (opicprop) { opicplen /= sizeof(u32); for (i = 0; i < opicplen; i++) { diff --git a/arch/powerpc/platforms/pseries/rtasd.c b/arch/powerpc/platforms/pseries/rtasd.c index 77d0937d5c07..9797b10b2935 100644 --- a/arch/powerpc/platforms/pseries/rtasd.c +++ b/arch/powerpc/platforms/pseries/rtasd.c @@ -363,7 +363,7 @@ static int get_eventscan_parms(void) node = of_find_node_by_path("/rtas"); - ip = get_property(node, "rtas-event-scan-rate", NULL); + ip = of_get_property(node, "rtas-event-scan-rate", NULL); if (ip == NULL) { printk(KERN_ERR "rtasd: no rtas-event-scan-rate\n"); of_node_put(node); diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index 34aff47b1f55..33eec2822c66 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -65,6 +65,7 @@ #include <asm/udbg.h> #include <asm/smp.h> #include <asm/firmware.h> +#include <asm/eeh.h> #include "plpar_wrappers.h" #include "pseries.h" @@ -92,7 +93,7 @@ static void pSeries_show_cpuinfo(struct seq_file *m) root = of_find_node_by_path("/"); if (root) - model = get_property(root, "model", NULL); + model = of_get_property(root, "model", NULL); seq_printf(m, "machine\t\t: CHRP %s\n", model); of_node_put(root); } @@ -138,8 +139,8 @@ static void __init pseries_mpic_init_IRQ(void) struct mpic *mpic; np = of_find_node_by_path("/"); - naddr = prom_n_addr_cells(np); - opprop = get_property(np, "platform-open-pic", &opplen); + naddr = of_n_addr_cells(np); + opprop = of_get_property(np, "platform-open-pic", &opplen); if (opprop != 0) { openpic_addr = of_read_number(opprop, naddr); printk(KERN_DEBUG "OpenPIC addr: %lx\n", openpic_addr); @@ -188,11 +189,11 @@ static void __init pseries_mpic_init_IRQ(void) break; if (strcmp(np->name, "pci") != 0) continue; - addrp = get_property(np, "8259-interrupt-acknowledge", + addrp = of_get_property(np, "8259-interrupt-acknowledge", NULL); if (addrp == NULL) continue; - naddr = prom_n_addr_cells(np); + naddr = of_n_addr_cells(np); intack = addrp[naddr-1]; if (naddr > 1) intack |= ((unsigned long)addrp[naddr-2]) << 32; @@ -225,7 +226,7 @@ static void __init pseries_discover_pic(void) for (np = NULL; (np = of_find_node_by_name(np, "interrupt-controller"));) { - typep = get_property(np, "compatible", NULL); + typep = of_get_property(np, "compatible", NULL); if (strstr(typep, "open-pic")) { pSeries_mpic_node = of_node_get(np); ppc_md.init_IRQ = pseries_mpic_init_IRQ; @@ -334,32 +335,6 @@ static void __init pSeries_init_early(void) DBG(" <- pSeries_init_early()\n"); } - -static int pSeries_check_legacy_ioport(unsigned int baseport) -{ - struct device_node *np; - -#define I8042_DATA_REG 0x60 -#define FDC_BASE 0x3f0 - - - switch(baseport) { - case I8042_DATA_REG: - np = of_find_node_by_type(NULL, "8042"); - if (np == NULL) - return -ENODEV; - of_node_put(np); - break; - case FDC_BASE: - np = of_find_node_by_type(NULL, "fdc"); - if (np == NULL) - return -ENODEV; - of_node_put(np); - break; - } - return 0; -} - /* * Called very early, MMU is off, device-tree isn't unflattened */ @@ -514,6 +489,10 @@ void pSeries_power_off(void) for (;;); } +#ifndef CONFIG_PCI +void pSeries_final_fixup(void) { } +#endif + define_machine(pseries) { .name = "pSeries", .probe = pSeries_probe, @@ -532,7 +511,6 @@ define_machine(pseries) { .set_rtc_time = rtas_set_rtc_time, .calibrate_decr = generic_calibrate_decr, .progress = rtas_progress, - .check_legacy_ioport = pSeries_check_legacy_ioport, .system_reset_exception = pSeries_system_reset_exception, .machine_check_exception = pSeries_machine_check_exception, }; diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c index 81d172d65038..896cbf340c42 100644 --- a/arch/powerpc/platforms/pseries/xics.c +++ b/arch/powerpc/platforms/pseries/xics.c @@ -576,7 +576,7 @@ static void __init xics_init_one_node(struct device_node *np, * This happens to be the case so far but we are playing with fire... * should be fixed one of these days. -BenH. */ - ireg = get_property(np, "ibm,interrupt-server-ranges", NULL); + ireg = of_get_property(np, "ibm,interrupt-server-ranges", NULL); /* Do that ever happen ? we'll know soon enough... but even good'old * f80 does have that property .. @@ -588,7 +588,7 @@ static void __init xics_init_one_node(struct device_node *np, */ *indx = *ireg; } - ireg = get_property(np, "reg", &ilen); + ireg = of_get_property(np, "reg", &ilen); if (!ireg) panic("xics_init_IRQ: can't find interrupt reg property"); @@ -640,10 +640,10 @@ static void __init xics_setup_8259_cascade(void) break; if (strcmp(np->name, "pci") != 0) continue; - addrp = get_property(np, "8259-interrupt-acknowledge", NULL); + addrp = of_get_property(np, "8259-interrupt-acknowledge", NULL); if (addrp == NULL) continue; - naddr = prom_n_addr_cells(np); + naddr = of_n_addr_cells(np); intack = addrp[naddr-1]; if (naddr > 1) intack |= ((unsigned long)addrp[naddr-2]) << 32; @@ -664,10 +664,11 @@ static struct device_node *cpuid_to_of_node(int cpu) int i, len; const u32 *intserv; - intserv = get_property(np, "ibm,ppc-interrupt-server#s", &len); + intserv = of_get_property(np, "ibm,ppc-interrupt-server#s", + &len); if (!intserv) - intserv = get_property(np, "reg", &len); + intserv = of_get_property(np, "reg", &len); i = len / sizeof(u32); @@ -709,7 +710,7 @@ void __init xics_init_IRQ(void) /* Find the server numbers for the boot cpu. */ np = cpuid_to_of_node(boot_cpuid); BUG_ON(!np); - ireg = get_property(np, "ibm,ppc-interrupt-gserver#s", &ilen); + ireg = of_get_property(np, "ibm,ppc-interrupt-gserver#s", &ilen); if (!ireg) goto skip_gserver_check; i = ilen / sizeof(int); @@ -725,7 +726,7 @@ void __init xics_init_IRQ(void) default_server = hcpuid; default_distrib_server = ireg[j+1]; - isize = get_property(np, + isize = of_get_property(np, "ibm,interrupt-server#-size", NULL); if (isize) interrupt_server_size = *isize; diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index 26ca3ffbc1de..e96ca9618dbb 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -11,12 +11,17 @@ obj-$(CONFIG_PPC_PMI) += pmi.o obj-$(CONFIG_U3_DART) += dart_iommu.o obj-$(CONFIG_MMIO_NVRAM) += mmio_nvram.o obj-$(CONFIG_FSL_SOC) += fsl_soc.o +obj-$(CONFIG_FSL_PCIE) += fsl_pcie.o obj-$(CONFIG_TSI108_BRIDGE) += tsi108_pci.o tsi108_dev.o obj-$(CONFIG_QUICC_ENGINE) += qe_lib/ +# contains only the suspend handler for time +obj-$(CONFIG_PM) += timer.o + ifeq ($(CONFIG_PPC_MERGE),y) obj-$(CONFIG_PPC_I8259) += i8259.o obj-$(CONFIG_PPC_83xx) += ipic.o +obj-$(CONFIG_4xx) += uic.o endif # Temporary hack until we have migrated to asm-powerpc diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c index 1488535b0e13..336186dd7f10 100644 --- a/arch/powerpc/sysdev/dart_iommu.c +++ b/arch/powerpc/sysdev/dart_iommu.c @@ -333,7 +333,7 @@ void iommu_init_early_dart(void) ppc_md.pci_dma_bus_setup = pci_dma_bus_setup_dart; /* Setup pci_dma ops */ - pci_dma_ops = &dma_iommu_ops; + set_pci_dma_ops(&dma_iommu_ops); return; } @@ -343,7 +343,7 @@ void iommu_init_early_dart(void) ppc_md.pci_dma_bus_setup = NULL; /* Setup pci_dma ops */ - pci_dma_ops = &dma_direct_ops; + set_pci_dma_ops(&dma_direct_ops); } diff --git a/arch/powerpc/sysdev/dcr.c b/arch/powerpc/sysdev/dcr.c index 1fc5819e7d18..574b6ef44e0b 100644 --- a/arch/powerpc/sysdev/dcr.c +++ b/arch/powerpc/sysdev/dcr.c @@ -26,7 +26,7 @@ unsigned int dcr_resource_start(struct device_node *np, unsigned int index) { unsigned int ds; - const u32 *dr = get_property(np, "dcr-reg", &ds); + const u32 *dr = of_get_property(np, "dcr-reg", &ds); if (dr == NULL || ds & 1 || index >= (ds / 8)) return 0; @@ -37,7 +37,7 @@ unsigned int dcr_resource_start(struct device_node *np, unsigned int index) unsigned int dcr_resource_len(struct device_node *np, unsigned int index) { unsigned int ds; - const u32 *dr = get_property(np, "dcr-reg", &ds); + const u32 *dr = of_get_property(np, "dcr-reg", &ds); if (dr == NULL || ds & 1 || index >= (ds / 8)) return 0; @@ -53,9 +53,9 @@ static struct device_node * find_dcr_parent(struct device_node * node) const u32 *p; for (par = of_node_get(node); par;) { - if (get_property(par, "dcr-controller", NULL)) + if (of_get_property(par, "dcr-controller", NULL)) break; - p = get_property(par, "dcr-parent", NULL); + p = of_get_property(par, "dcr-parent", NULL); tmp = par; if (p == NULL) par = of_get_parent(par); @@ -80,13 +80,13 @@ u64 of_translate_dcr_address(struct device_node *dev, return OF_BAD_ADDR; /* Stride is not properly defined yet, default to 0x10 for Axon */ - p = get_property(dp, "dcr-mmio-stride", NULL); + p = of_get_property(dp, "dcr-mmio-stride", NULL); stride = (p == NULL) ? 0x10 : *p; /* XXX FIXME: Which property name is to use of the 2 following ? */ - p = get_property(dp, "dcr-mmio-range", NULL); + p = of_get_property(dp, "dcr-mmio-range", NULL); if (p == NULL) - p = get_property(dp, "dcr-mmio-space", NULL); + p = of_get_property(dp, "dcr-mmio-space", NULL); if (p == NULL) return OF_BAD_ADDR; diff --git a/arch/powerpc/platforms/86xx/mpc86xx_pcie.c b/arch/powerpc/sysdev/fsl_pcie.c index a2f4f730213e..041c07e8b665 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx_pcie.c +++ b/arch/powerpc/sysdev/fsl_pcie.c @@ -24,8 +24,6 @@ #include <asm/pci-bridge.h> #include <asm/machdep.h> -#include "mpc86xx.h" - #define PCI_CFG_OUT out_be32 /* ERRATA PCI-Ex 14 PCIE Controller timeout */ diff --git a/arch/powerpc/sysdev/fsl_pcie.h b/arch/powerpc/sysdev/fsl_pcie.h new file mode 100644 index 000000000000..8d9779c84bea --- /dev/null +++ b/arch/powerpc/sysdev/fsl_pcie.h @@ -0,0 +1,94 @@ +/* + * MPC85xx/86xx PCI Express structure define + * + * Copyright 2007 Freescale Semiconductor, Inc + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifdef __KERNEL__ +#ifndef __POWERPC_FSL_PCIE_H +#define __POWERPC_FSL_PCIE_H + +/* PCIE Express IO block registers in 85xx/86xx */ + +struct ccsr_pex { + __be32 __iomem pex_config_addr; /* 0x.000 - PCI Express Configuration Address Register */ + __be32 __iomem pex_config_data; /* 0x.004 - PCI Express Configuration Data Register */ + u8 __iomem res1[4]; + __be32 __iomem pex_otb_cpl_tor; /* 0x.00c - PCI Express Outbound completion timeout register */ + __be32 __iomem pex_conf_tor; /* 0x.010 - PCI Express configuration timeout register */ + u8 __iomem res2[12]; + __be32 __iomem pex_pme_mes_dr; /* 0x.020 - PCI Express PME and message detect register */ + __be32 __iomem pex_pme_mes_disr; /* 0x.024 - PCI Express PME and message disable register */ + __be32 __iomem pex_pme_mes_ier; /* 0x.028 - PCI Express PME and message interrupt enable register */ + __be32 __iomem pex_pmcr; /* 0x.02c - PCI Express power management command register */ + u8 __iomem res3[3024]; + __be32 __iomem pexotar0; /* 0x.c00 - PCI Express outbound translation address register 0 */ + __be32 __iomem pexotear0; /* 0x.c04 - PCI Express outbound translation extended address register 0*/ + u8 __iomem res4[8]; + __be32 __iomem pexowar0; /* 0x.c10 - PCI Express outbound window attributes register 0*/ + u8 __iomem res5[12]; + __be32 __iomem pexotar1; /* 0x.c20 - PCI Express outbound translation address register 1 */ + __be32 __iomem pexotear1; /* 0x.c24 - PCI Express outbound translation extended address register 1*/ + __be32 __iomem pexowbar1; /* 0x.c28 - PCI Express outbound window base address register 1*/ + u8 __iomem res6[4]; + __be32 __iomem pexowar1; /* 0x.c30 - PCI Express outbound window attributes register 1*/ + u8 __iomem res7[12]; + __be32 __iomem pexotar2; /* 0x.c40 - PCI Express outbound translation address register 2 */ + __be32 __iomem pexotear2; /* 0x.c44 - PCI Express outbound translation extended address register 2*/ + __be32 __iomem pexowbar2; /* 0x.c48 - PCI Express outbound window base address register 2*/ + u8 __iomem res8[4]; + __be32 __iomem pexowar2; /* 0x.c50 - PCI Express outbound window attributes register 2*/ + u8 __iomem res9[12]; + __be32 __iomem pexotar3; /* 0x.c60 - PCI Express outbound translation address register 3 */ + __be32 __iomem pexotear3; /* 0x.c64 - PCI Express outbound translation extended address register 3*/ + __be32 __iomem pexowbar3; /* 0x.c68 - PCI Express outbound window base address register 3*/ + u8 __iomem res10[4]; + __be32 __iomem pexowar3; /* 0x.c70 - PCI Express outbound window attributes register 3*/ + u8 __iomem res11[12]; + __be32 __iomem pexotar4; /* 0x.c80 - PCI Express outbound translation address register 4 */ + __be32 __iomem pexotear4; /* 0x.c84 - PCI Express outbound translation extended address register 4*/ + __be32 __iomem pexowbar4; /* 0x.c88 - PCI Express outbound window base address register 4*/ + u8 __iomem res12[4]; + __be32 __iomem pexowar4; /* 0x.c90 - PCI Express outbound window attributes register 4*/ + u8 __iomem res13[12]; + u8 __iomem res14[256]; + __be32 __iomem pexitar3; /* 0x.da0 - PCI Express inbound translation address register 3 */ + u8 __iomem res15[4]; + __be32 __iomem pexiwbar3; /* 0x.da8 - PCI Express inbound window base address register 3 */ + __be32 __iomem pexiwbear3; /* 0x.dac - PCI Express inbound window base extended address register 3 */ + __be32 __iomem pexiwar3; /* 0x.db0 - PCI Express inbound window attributes register 3 */ + u8 __iomem res16[12]; + __be32 __iomem pexitar2; /* 0x.dc0 - PCI Express inbound translation address register 2 */ + u8 __iomem res17[4]; + __be32 __iomem pexiwbar2; /* 0x.dc8 - PCI Express inbound window base address register 2 */ + __be32 __iomem pexiwbear2; /* 0x.dcc - PCI Express inbound window base extended address register 2 */ + __be32 __iomem pexiwar2; /* 0x.dd0 - PCI Express inbound window attributes register 2 */ + u8 __iomem res18[12]; + __be32 __iomem pexitar1; /* 0x.de0 - PCI Express inbound translation address register 2 */ + u8 __iomem res19[4]; + __be32 __iomem pexiwbar1; /* 0x.de8 - PCI Express inbound window base address register 2 */ + __be32 __iomem pexiwbear1; /* 0x.dec - PCI Express inbound window base extended address register 2 */ + __be32 __iomem pexiwar1; /* 0x.df0 - PCI Express inbound window attributes register 2 */ + u8 __iomem res20[12]; + __be32 __iomem pex_err_dr; /* 0x.e00 - PCI Express error detect register */ + u8 __iomem res21[4]; + __be32 __iomem pex_err_en; /* 0x.e08 - PCI Express error interrupt enable register */ + u8 __iomem res22[4]; + __be32 __iomem pex_err_disr; /* 0x.e10 - PCI Express error disable register */ + u8 __iomem res23[12]; + __be32 __iomem pex_err_cap_stat; /* 0x.e20 - PCI Express error capture status register */ + u8 __iomem res24[4]; + __be32 __iomem pex_err_cap_r0; /* 0x.e28 - PCI Express error capture register 0 */ + __be32 __iomem pex_err_cap_r1; /* 0x.e2c - PCI Express error capture register 0 */ + __be32 __iomem pex_err_cap_r2; /* 0x.e30 - PCI Express error capture register 0 */ + __be32 __iomem pex_err_cap_r3; /* 0x.e34 - PCI Express error capture register 0 */ +}; + +#endif /* __POWERPC_FSL_PCIE_H */ +#endif /* __KERNEL__ */ diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index d20f02927f72..8a123c71449f 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -52,7 +52,7 @@ phys_addr_t get_immrbase(void) soc = of_find_node_by_type(NULL, "soc"); if (soc) { unsigned int size; - const void *prop = get_property(soc, "reg", &size); + const void *prop = of_get_property(soc, "reg", &size); if (prop) immrbase = of_translate_address(soc, prop); @@ -78,8 +78,8 @@ u32 get_brgfreq(void) node = of_find_node_by_type(NULL, "cpm"); if (node) { unsigned int size; - const unsigned int *prop = get_property(node, "brg-frequency", - &size); + const unsigned int *prop = of_get_property(node, + "brg-frequency", &size); if (prop) brgfreq = *prop; @@ -103,8 +103,8 @@ u32 get_baudrate(void) node = of_find_node_by_type(NULL, "serial"); if (node) { unsigned int size; - const unsigned int *prop = get_property(node, "current-speed", - &size); + const unsigned int *prop = of_get_property(node, + "current-speed", &size); if (prop) fs_baudrate = *prop; @@ -153,7 +153,8 @@ static int __init gfar_mdio_of_init(void) while ((child = of_get_next_child(np, child)) != NULL) { int irq = irq_of_parse_and_map(child, 0); if (irq != NO_IRQ) { - const u32 *id = get_property(child, "reg", NULL); + const u32 *id = of_get_property(child, + "reg", NULL); mdio_data.irq[*id] = irq; } } @@ -209,7 +210,7 @@ static int __init gfar_of_init(void) of_irq_to_resource(np, 0, &r[1]); - model = get_property(np, "model", NULL); + model = of_get_property(np, "model", NULL); /* If we aren't the FEC we have multiple interrupts */ if (model && strcasecmp(model, "FEC")) { @@ -253,7 +254,7 @@ static int __init gfar_of_init(void) FSL_GIANFAR_DEV_HAS_VLAN | FSL_GIANFAR_DEV_HAS_EXTENDED_HASH; - ph = get_property(np, "phy-handle", NULL); + ph = of_get_property(np, "phy-handle", NULL); phy = of_find_node_by_phandle(*ph); if (phy == NULL) { @@ -263,7 +264,7 @@ static int __init gfar_of_init(void) mdio = of_get_parent(phy); - id = get_property(phy, "reg", NULL); + id = of_get_property(phy, "reg", NULL); ret = of_address_to_resource(mdio, 0, &res); if (ret) { of_node_put(phy); @@ -325,11 +326,11 @@ static int __init fsl_i2c_of_init(void) } i2c_data.device_flags = 0; - flags = get_property(np, "dfsrr", NULL); + flags = of_get_property(np, "dfsrr", NULL); if (flags) i2c_data.device_flags |= FSL_I2C_DEV_SEPARATE_DFSRR; - flags = get_property(np, "fsl5200-clocking", NULL); + flags = of_get_property(np, "fsl5200-clocking", NULL); if (flags) i2c_data.device_flags |= FSL_I2C_DEV_CLOCK_5200; @@ -374,7 +375,7 @@ static int __init mpc83xx_wdt_init(void) goto nosoc; } - freq = get_property(soc, "bus-frequency", NULL); + freq = of_get_property(soc, "bus-frequency", NULL); if (!freq) { ret = -ENODEV; goto err; @@ -466,15 +467,15 @@ static int __init fsl_usb_of_init(void) usb_data.operating_mode = FSL_USB2_MPH_HOST; - prop = get_property(np, "port0", NULL); + prop = of_get_property(np, "port0", NULL); if (prop) usb_data.port_enables |= FSL_USB2_PORT0_ENABLED; - prop = get_property(np, "port1", NULL); + prop = of_get_property(np, "port1", NULL); if (prop) usb_data.port_enables |= FSL_USB2_PORT1_ENABLED; - prop = get_property(np, "phy_type", NULL); + prop = of_get_property(np, "phy_type", NULL); usb_data.phy_mode = determine_usb_phy(prop); ret = @@ -501,7 +502,7 @@ static int __init fsl_usb_of_init(void) of_irq_to_resource(np, 0, &r[1]); - prop = get_property(np, "dr_mode", NULL); + prop = of_get_property(np, "dr_mode", NULL); if (!prop || !strcmp(prop, "host")) { usb_data.operating_mode = FSL_USB2_DR_HOST; @@ -538,7 +539,7 @@ static int __init fsl_usb_of_init(void) goto err; } - prop = get_property(np, "phy_type", NULL); + prop = of_get_property(np, "phy_type", NULL); usb_data.phy_mode = determine_usb_phy(prop); if (usb_dev_dr_host) { @@ -633,7 +634,7 @@ static int __init fs_enet_of_init(void) goto err; } - model = get_property(np, "model", NULL); + model = of_get_property(np, "model", NULL); if (model == NULL) { ret = -ENODEV; goto unreg; @@ -643,7 +644,7 @@ static int __init fs_enet_of_init(void) if (mac_addr) memcpy(fs_enet_data.macaddr, mac_addr, 6); - ph = get_property(np, "phy-handle", NULL); + ph = of_get_property(np, "phy-handle", NULL); phy = of_find_node_by_phandle(*ph); if (phy == NULL) { @@ -651,12 +652,12 @@ static int __init fs_enet_of_init(void) goto unreg; } - phy_addr = get_property(phy, "reg", NULL); + phy_addr = of_get_property(phy, "reg", NULL); fs_enet_data.phy_addr = *phy_addr; - phy_irq = get_property(phy, "interrupts", NULL); + phy_irq = of_get_property(phy, "interrupts", NULL); - id = get_property(np, "device-id", NULL); + id = of_get_property(np, "device-id", NULL); fs_enet_data.fs_no = *id; strcpy(fs_enet_data.fs_type, model); @@ -668,8 +669,10 @@ static int __init fs_enet_of_init(void) goto unreg; } - fs_enet_data.clk_rx = *((u32 *) get_property(np, "rx-clock", NULL)); - fs_enet_data.clk_tx = *((u32 *) get_property(np, "tx-clock", NULL)); + fs_enet_data.clk_rx = *((u32 *)of_get_property(np, + "rx-clock", NULL)); + fs_enet_data.clk_tx = *((u32 *)of_get_property(np, + "tx-clock", NULL)); if (strstr(model, "FCC")) { int fcc_index = *id - 1; @@ -690,7 +693,7 @@ static int __init fs_enet_of_init(void) fs_enet_data.bus_id = (char*)&bus_id[(*id)]; fs_enet_data.init_ioports = init_fcc_ioports; - mdio_bb_prop = get_property(phy, "bitbang", NULL); + mdio_bb_prop = of_get_property(phy, "bitbang", NULL); if (mdio_bb_prop) { struct platform_device *fs_enet_mdio_bb_dev; struct fs_mii_bb_platform_info fs_enet_mdio_bb_data; @@ -796,10 +799,10 @@ static int __init cpm_uart_of_init(void) goto err; } - id = get_property(np, "device-id", NULL); + id = of_get_property(np, "device-id", NULL); cpm_uart_data.fs_no = *id; - model = (char*)get_property(np, "model", NULL); + model = of_get_property(np, "model", NULL); strcpy(cpm_uart_data.fs_type, model); cpm_uart_data.uart_clk = ppc_proc_freq; @@ -808,8 +811,10 @@ static int __init cpm_uart_of_init(void) cpm_uart_data.tx_buf_size = 32; cpm_uart_data.rx_num_fifo = 4; cpm_uart_data.rx_buf_size = 32; - cpm_uart_data.clk_rx = *((u32 *) get_property(np, "rx-clock", NULL)); - cpm_uart_data.clk_tx = *((u32 *) get_property(np, "tx-clock", NULL)); + cpm_uart_data.clk_rx = *((u32 *)of_get_property(np, + "rx-clock", NULL)); + cpm_uart_data.clk_tx = *((u32 *)of_get_property(np, + "tx-clock", NULL)); ret = platform_device_add_data(cpm_uart_dev, &cpm_uart_data, @@ -833,7 +838,7 @@ arch_initcall(cpm_uart_of_init); #ifdef CONFIG_8xx extern void init_scc_ioports(struct fs_platform_info*); -extern int platform_device_skip(char *model, int id); +extern int platform_device_skip(const char *model, int id); static int __init fs_enet_mdio_of_init(void) { @@ -900,21 +905,22 @@ static int __init fs_enet_of_init(void) struct resource r[4]; struct device_node *phy = NULL, *mdio = NULL; struct fs_platform_info fs_enet_data; - unsigned int *id, *phy_addr; + const unsigned int *id; + const unsigned int *phy_addr; void *mac_addr; - phandle *ph; - char *model; + const phandle *ph; + const char *model; memset(r, 0, sizeof(r)); memset(&fs_enet_data, 0, sizeof(fs_enet_data)); - model = (char *)get_property(np, "model", NULL); + model = of_get_property(np, "model", NULL); if (model == NULL) { ret = -ENODEV; goto unreg; } - id = (u32 *) get_property(np, "device-id", NULL); + id = of_get_property(np, "device-id", NULL); fs_enet_data.fs_no = *id; if (platform_device_skip(model, *id)) @@ -929,12 +935,12 @@ static int __init fs_enet_of_init(void) if (mac_addr) memcpy(fs_enet_data.macaddr, mac_addr, 6); - ph = (phandle *) get_property(np, "phy-handle", NULL); + ph = of_get_property(np, "phy-handle", NULL); if (ph != NULL) phy = of_find_node_by_phandle(*ph); if (phy != NULL) { - phy_addr = (u32 *) get_property(phy, "reg", NULL); + phy_addr = of_get_property(phy, "reg", NULL); fs_enet_data.phy_addr = *phy_addr; fs_enet_data.has_phy = 1; @@ -947,7 +953,7 @@ static int __init fs_enet_of_init(void) } } - model = (char*)get_property(np, "model", NULL); + model = of_get_property(np, "model", NULL); strcpy(fs_enet_data.fs_type, model); if (strstr(model, "FEC")) { @@ -1038,8 +1044,8 @@ static int __init cpm_smc_uart_of_init(void) i++) { struct resource r[3]; struct fs_uart_platform_info cpm_uart_data; - int *id; - char *model; + const int *id; + const char *model; memset(r, 0, sizeof(r)); memset(&cpm_uart_data, 0, sizeof(cpm_uart_data)); @@ -1066,10 +1072,10 @@ static int __init cpm_smc_uart_of_init(void) goto err; } - model = (char*)get_property(np, "model", NULL); + model = of_get_property(np, "model", NULL); strcpy(cpm_uart_data.fs_type, model); - id = (int*)get_property(np, "device-id", NULL); + id = of_get_property(np, "device-id", NULL); cpm_uart_data.fs_no = *id; cpm_uart_data.uart_clk = ppc_proc_freq; diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index bcfb900481f8..0b84b7c775d8 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -304,7 +304,7 @@ static void __init mpic_test_broken_ipi(struct mpic *mpic) } } -#ifdef CONFIG_MPIC_BROKEN_U3 +#ifdef CONFIG_MPIC_U3_HT_IRQS /* Test if an interrupt is sourced from HyperTransport (used on broken U3s) * to force the edge setting on the MPIC and do the ack workaround. @@ -476,7 +476,7 @@ static void __init mpic_scan_ht_pics(struct mpic *mpic) } } -#else /* CONFIG_MPIC_BROKEN_U3 */ +#else /* CONFIG_MPIC_U3_HT_IRQS */ static inline int mpic_is_ht_interrupt(struct mpic *mpic, unsigned int source) { @@ -487,7 +487,7 @@ static void __init mpic_scan_ht_pics(struct mpic *mpic) { } -#endif /* CONFIG_MPIC_BROKEN_U3 */ +#endif /* CONFIG_MPIC_U3_HT_IRQS */ #define mpic_irq_to_hw(virq) ((unsigned int)irq_map[virq].hwirq) @@ -615,7 +615,7 @@ static void mpic_end_irq(unsigned int irq) mpic_eoi(mpic); } -#ifdef CONFIG_MPIC_BROKEN_U3 +#ifdef CONFIG_MPIC_U3_HT_IRQS static void mpic_unmask_ht_irq(unsigned int irq) { @@ -665,7 +665,7 @@ static void mpic_end_ht_irq(unsigned int irq) mpic_ht_end_irq(mpic, src); mpic_eoi(mpic); } -#endif /* !CONFIG_MPIC_BROKEN_U3 */ +#endif /* !CONFIG_MPIC_U3_HT_IRQS */ #ifdef CONFIG_SMP @@ -788,7 +788,7 @@ static struct irq_chip mpic_ipi_chip = { }; #endif /* CONFIG_SMP */ -#ifdef CONFIG_MPIC_BROKEN_U3 +#ifdef CONFIG_MPIC_U3_HT_IRQS static struct irq_chip mpic_irq_ht_chip = { .startup = mpic_startup_ht_irq, .shutdown = mpic_shutdown_ht_irq, @@ -797,7 +797,7 @@ static struct irq_chip mpic_irq_ht_chip = { .eoi = mpic_end_ht_irq, .set_type = mpic_set_irq_type, }; -#endif /* CONFIG_MPIC_BROKEN_U3 */ +#endif /* CONFIG_MPIC_U3_HT_IRQS */ static int mpic_host_match(struct irq_host *h, struct device_node *node) @@ -837,11 +837,11 @@ static int mpic_host_map(struct irq_host *h, unsigned int virq, /* Default chip */ chip = &mpic->hc_irq; -#ifdef CONFIG_MPIC_BROKEN_U3 +#ifdef CONFIG_MPIC_U3_HT_IRQS /* Check for HT interrupts, override vecpri */ if (mpic_is_ht_interrupt(mpic, hw)) chip = &mpic->hc_ht_irq; -#endif /* CONFIG_MPIC_BROKEN_U3 */ +#endif /* CONFIG_MPIC_U3_HT_IRQS */ DBG("mpic: mapping to irq chip @%p\n", chip); @@ -937,12 +937,12 @@ struct mpic * __init mpic_alloc(struct device_node *node, mpic->hc_irq.typename = name; if (flags & MPIC_PRIMARY) mpic->hc_irq.set_affinity = mpic_set_affinity; -#ifdef CONFIG_MPIC_BROKEN_U3 +#ifdef CONFIG_MPIC_U3_HT_IRQS mpic->hc_ht_irq = mpic_irq_ht_chip; mpic->hc_ht_irq.typename = name; if (flags & MPIC_PRIMARY) mpic->hc_ht_irq.set_affinity = mpic_set_affinity; -#endif /* CONFIG_MPIC_BROKEN_U3 */ +#endif /* CONFIG_MPIC_U3_HT_IRQS */ #ifdef CONFIG_SMP mpic->hc_ipi = mpic_ipi_chip; @@ -970,7 +970,7 @@ struct mpic * __init mpic_alloc(struct device_node *node, mpic->spurious_vec = intvec_top; /* Check for "big-endian" in device-tree */ - if (node && get_property(node, "big-endian", NULL) != NULL) + if (node && of_get_property(node, "big-endian", NULL) != NULL) mpic->flags |= MPIC_BIG_ENDIAN; @@ -986,13 +986,13 @@ struct mpic * __init mpic_alloc(struct device_node *node, BUG_ON(paddr == 0 && node == NULL); /* If no physical address passed in, check if it's dcr based */ - if (paddr == 0 && get_property(node, "dcr-reg", NULL) != NULL) + if (paddr == 0 && of_get_property(node, "dcr-reg", NULL) != NULL) mpic->flags |= MPIC_USES_DCR; #ifdef CONFIG_PPC_DCR if (mpic->flags & MPIC_USES_DCR) { const u32 *dbasep; - dbasep = get_property(node, "dcr-reg", NULL); + dbasep = of_get_property(node, "dcr-reg", NULL); BUG_ON(dbasep == NULL); mpic->dcr_base = *dbasep; mpic->reg_type = mpic_access_dcr; @@ -1006,7 +1006,7 @@ struct mpic * __init mpic_alloc(struct device_node *node, */ if (paddr == 0 && !(mpic->flags & MPIC_USES_DCR)) { const u32 *reg; - reg = get_property(node, "reg", NULL); + reg = of_get_property(node, "reg", NULL); BUG_ON(reg == NULL); paddr = of_translate_address(node, reg); BUG_ON(paddr == OF_BAD_ADDR); @@ -1142,7 +1142,7 @@ void __init mpic_init(struct mpic *mpic) /* Do the HT PIC fixups on U3 broken mpic */ DBG("MPIC flags: %x\n", mpic->flags); - if ((mpic->flags & MPIC_BROKEN_U3) && (mpic->flags & MPIC_PRIMARY)) + if ((mpic->flags & MPIC_U3_HT_IRQS) && (mpic->flags & MPIC_PRIMARY)) mpic_scan_ht_pics(mpic); for (i = 0; i < mpic->num_sources; i++) { diff --git a/arch/powerpc/sysdev/pmi.c b/arch/powerpc/sysdev/pmi.c index a5282011d39e..85a7c99c1003 100644 --- a/arch/powerpc/sysdev/pmi.c +++ b/arch/powerpc/sysdev/pmi.c @@ -33,7 +33,7 @@ #include <asm/of_platform.h> #include <asm/io.h> #include <asm/pmi.h> - +#include <asm/prom.h> struct pmi_data { struct list_head handler; @@ -49,21 +49,6 @@ struct pmi_data { }; - -static void __iomem *of_iomap(struct device_node *np) -{ - struct resource res; - - if (of_address_to_resource(np, 0, &res)) - return NULL; - - pr_debug("Resource start: 0x%lx\n", res.start); - pr_debug("Resource end: 0x%lx\n", res.end); - - return ioremap(res.start, 1 + res.end - res.start); -} - - static int pmi_irq_handler(int irq, void *dev_id) { struct pmi_data *data; @@ -118,6 +103,7 @@ out: static struct of_device_id pmi_match[] = { { .type = "ibm,pmi", .name = "ibm,pmi" }, + { .type = "ibm,pmi" }, {}, }; @@ -153,7 +139,7 @@ static int pmi_of_probe(struct of_device *dev, goto out; } - data->pmi_reg = of_iomap(np); + data->pmi_reg = of_iomap(np, 0); if (!data->pmi_reg) { printk(KERN_ERR "pmi: invalid register address.\n"); rc = -EFAULT; @@ -279,6 +265,9 @@ void pmi_register_handler(struct of_device *device, struct pmi_data *data; data = device->dev.driver_data; + if (!data) + return; + spin_lock(&data->handler_spinlock); list_add_tail(&handler->node, &data->handler); spin_unlock(&data->handler_spinlock); @@ -289,10 +278,12 @@ void pmi_unregister_handler(struct of_device *device, struct pmi_handler *handler) { struct pmi_data *data; + data = device->dev.driver_data; - pr_debug("pmi: unregistering handler %p\n", handler); + if (!data) + return; - data = device->dev.driver_data; + pr_debug("pmi: unregistering handler %p\n", handler); spin_lock(&data->handler_spinlock); list_del(&handler->node); diff --git a/arch/powerpc/sysdev/qe_lib/Kconfig b/arch/powerpc/sysdev/qe_lib/Kconfig index a725e80befa8..887739f3badc 100644 --- a/arch/powerpc/sysdev/qe_lib/Kconfig +++ b/arch/powerpc/sysdev/qe_lib/Kconfig @@ -2,11 +2,8 @@ # QE Communication options # -menu "QE Options" - depends on QUICC_ENGINE - config UCC_SLOW - bool "UCC Slow Protocols Support" + bool default n select UCC help @@ -14,10 +11,9 @@ config UCC_SLOW protocols: UART, BISYNC, QMC config UCC_FAST - bool "UCC Fast Protocols Support" + bool default n select UCC - select UCC_SLOW help This option provides qe_lib support to UCC fast protocols: HDLC, Ethernet, ATM, transparent @@ -26,5 +22,3 @@ config UCC bool default y if UCC_FAST || UCC_SLOW -endmenu - diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c index 43f6cc9d7ea0..7f4c07543961 100644 --- a/arch/powerpc/sysdev/qe_lib/qe.c +++ b/arch/powerpc/sysdev/qe_lib/qe.c @@ -71,7 +71,7 @@ phys_addr_t get_qe_base(void) qe = of_find_node_by_type(NULL, "qe"); if (qe) { unsigned int size; - const void *prop = get_property(qe, "reg", &size); + const void *prop = of_get_property(qe, "reg", &size); qebase = of_translate_address(qe, prop); of_node_put(qe); }; @@ -158,7 +158,7 @@ unsigned int get_brg_clk(void) qe = of_find_node_by_type(NULL, "qe"); if (qe) { unsigned int size; - const u32 *prop = get_property(qe, "brg-frequency", &size); + const u32 *prop = of_get_property(qe, "brg-frequency", &size); brg_clk = *prop; of_node_put(qe); }; diff --git a/arch/powerpc/sysdev/qe_lib/qe_io.c b/arch/powerpc/sysdev/qe_lib/qe_io.c index 0afe6bfe3714..e32b45bf9ff5 100644 --- a/arch/powerpc/sysdev/qe_lib/qe_io.c +++ b/arch/powerpc/sysdev/qe_lib/qe_io.c @@ -53,7 +53,7 @@ int par_io_init(struct device_node *np) return ret; par_io = ioremap(res.start, res.end - res.start + 1); - num_ports = get_property(np, "num-ports", NULL); + num_ports = of_get_property(np, "num-ports", NULL); if (num_ports) num_par_io_ports = *num_ports; @@ -161,7 +161,7 @@ int par_io_of_config(struct device_node *np) return -1; } - ph = get_property(np, "pio-handle", NULL); + ph = of_get_property(np, "pio-handle", NULL); if (ph == 0) { printk(KERN_ERR "pio-handle not available \n"); return -1; @@ -169,7 +169,7 @@ int par_io_of_config(struct device_node *np) pio = of_find_node_by_phandle(*ph); - pio_map = get_property(pio, "pio-map", &pio_map_len); + pio_map = of_get_property(pio, "pio-map", &pio_map_len); if (pio_map == NULL) { printk(KERN_ERR "pio-map is not set! \n"); return -1; diff --git a/arch/powerpc/sysdev/qe_lib/ucc_slow.c b/arch/powerpc/sysdev/qe_lib/ucc_slow.c index 817df73ecf56..b930d686a4d1 100644 --- a/arch/powerpc/sysdev/qe_lib/ucc_slow.c +++ b/arch/powerpc/sysdev/qe_lib/ucc_slow.c @@ -187,7 +187,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc uccs->us_pram = qe_muram_addr(uccs->us_pram_offset); /* Init Guemr register */ - if ((ret = ucc_init_guemr((struct ucc_common *) (us_info->regs)))) { + if ((ret = ucc_init_guemr((struct ucc_common *) us_regs))) { printk(KERN_ERR "%s: cannot init GUEMR", __FUNCTION__); ucc_slow_free(uccs); return ret; @@ -195,7 +195,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc /* Set UCC to slow type */ if ((ret = ucc_set_type(us_info->ucc_num, - (struct ucc_common *) (us_info->regs), + (struct ucc_common *) us_regs, UCC_SPEED_TYPE_SLOW))) { printk(KERN_ERR "%s: cannot set UCC type", __FUNCTION__); ucc_slow_free(uccs); diff --git a/arch/powerpc/sysdev/timer.c b/arch/powerpc/sysdev/timer.c new file mode 100644 index 000000000000..4a01748b4217 --- /dev/null +++ b/arch/powerpc/sysdev/timer.c @@ -0,0 +1,71 @@ +/* + * Common code to keep time when machine suspends. + * + * Copyright 2007 Johannes Berg <johannes@sipsolutions.net> + * + * GPLv2 + */ + +#include <linux/time.h> +#include <linux/sysdev.h> +#include <asm/rtc.h> + +static unsigned long suspend_rtc_time; + +/* + * Reset the time after a sleep. + */ +static int timer_resume(struct sys_device *dev) +{ + struct timeval tv; + struct timespec ts; + struct rtc_time cur_rtc_tm; + unsigned long cur_rtc_time, diff; + + /* get current RTC time and convert to seconds */ + get_rtc_time(&cur_rtc_tm); + rtc_tm_to_time(&cur_rtc_tm, &cur_rtc_time); + + diff = cur_rtc_time - suspend_rtc_time; + + /* adjust time of day by seconds that elapsed while + * we were suspended */ + do_gettimeofday(&tv); + ts.tv_sec = tv.tv_sec + diff; + ts.tv_nsec = tv.tv_usec * NSEC_PER_USEC; + do_settimeofday(&ts); + + return 0; +} + +static int timer_suspend(struct sys_device *dev, pm_message_t state) +{ + struct rtc_time suspend_rtc_tm; + WARN_ON(!ppc_md.get_rtc_time); + + get_rtc_time(&suspend_rtc_tm); + rtc_tm_to_time(&suspend_rtc_tm, &suspend_rtc_time); + + return 0; +} + +static struct sysdev_class timer_sysclass = { + .resume = timer_resume, + .suspend = timer_suspend, + set_kset_name("timer"), +}; + +static struct sys_device device_timer = { + .id = 0, + .cls = &timer_sysclass, +}; + +static int time_init_device(void) +{ + int error = sysdev_class_register(&timer_sysclass); + if (!error) + error = sysdev_register(&device_timer); + return error; +} + +device_initcall(time_init_device); diff --git a/arch/powerpc/sysdev/tsi108_dev.c b/arch/powerpc/sysdev/tsi108_dev.c index 97f37ef4bbbf..337039ee51e6 100644 --- a/arch/powerpc/sysdev/tsi108_dev.c +++ b/arch/powerpc/sysdev/tsi108_dev.c @@ -48,7 +48,7 @@ phys_addr_t get_csrbase(void) tsi = of_find_node_by_type(NULL, "tsi-bridge"); if (tsi) { unsigned int size; - const void *prop = get_property(tsi, "reg", &size); + const void *prop = of_get_property(tsi, "reg", &size); tsi108_csr_base = of_translate_address(tsi, prop); of_node_put(tsi); }; @@ -77,10 +77,10 @@ static int __init tsi108_eth_of_init(void) struct resource r[2]; struct device_node *phy; hw_info tsi_eth_data; - unsigned int *id; - unsigned int *phy_id; + const unsigned int *id; + const unsigned int *phy_id; const void *mac_addr; - phandle *ph; + const phandle *ph; memset(r, 0, sizeof(r)); memset(&tsi_eth_data, 0, sizeof(tsi_eth_data)); @@ -107,10 +107,10 @@ static int __init tsi108_eth_of_init(void) goto err; } - mac_addr = get_property(np, "address", NULL); + mac_addr = of_get_property(np, "address", NULL); memcpy(tsi_eth_data.mac_addr, mac_addr, 6); - ph = (phandle *) get_property(np, "phy-handle", NULL); + ph = of_get_property(np, "phy-handle", NULL); phy = of_find_node_by_phandle(*ph); if (phy == NULL) { @@ -118,8 +118,8 @@ static int __init tsi108_eth_of_init(void) goto unreg; } - id = (u32 *) get_property(phy, "reg", NULL); - phy_id = (u32 *) get_property(phy, "phy-id", NULL); + id = of_get_property(phy, "reg", NULL); + phy_id = of_get_property(phy, "phy-id", NULL); ret = of_address_to_resource(phy, 0, &res); if (ret) { of_node_put(phy); diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c index ae249c6bbbcf..58b9e7f8abf2 100644 --- a/arch/powerpc/sysdev/tsi108_pci.c +++ b/arch/powerpc/sysdev/tsi108_pci.c @@ -211,7 +211,7 @@ int __init tsi108_setup_pci(struct device_node *dev) has_address = (of_address_to_resource(dev, 0, &rsrc) == 0); /* Get bus range if any */ - bus_range = get_property(dev, "bus-range", &len); + bus_range = of_get_property(dev, "bus-range", &len); if (bus_range == NULL || len < 2 * sizeof(int)) { printk(KERN_WARNING "Can't get bus-range for %s, assume" " bus 0\n", dev->full_name); diff --git a/arch/powerpc/sysdev/uic.c b/arch/powerpc/sysdev/uic.c new file mode 100644 index 000000000000..968fb40af9dc --- /dev/null +++ b/arch/powerpc/sysdev/uic.c @@ -0,0 +1,342 @@ +/* + * arch/powerpc/sysdev/uic.c + * + * IBM PowerPC 4xx Universal Interrupt Controller + * + * Copyright 2007 David Gibson <dwg@au1.ibm.com>, IBM Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/reboot.h> +#include <linux/slab.h> +#include <linux/stddef.h> +#include <linux/sched.h> +#include <linux/signal.h> +#include <linux/sysdev.h> +#include <linux/device.h> +#include <linux/bootmem.h> +#include <linux/spinlock.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <asm/irq.h> +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/dcr.h> + +#define NR_UIC_INTS 32 + +#define UIC_SR 0x0 +#define UIC_ER 0x2 +#define UIC_CR 0x3 +#define UIC_PR 0x4 +#define UIC_TR 0x5 +#define UIC_MSR 0x6 +#define UIC_VR 0x7 +#define UIC_VCR 0x8 + +#define uic_irq_to_hw(virq) (irq_map[virq].hwirq) + +struct uic *primary_uic; + +struct uic { + int index; + int dcrbase; + + spinlock_t lock; + + /* The remapper for this UIC */ + struct irq_host *irqhost; + + /* For secondary UICs, the cascade interrupt's irqaction */ + struct irqaction cascade; + + /* The device node of the interrupt controller */ + struct device_node *of_node; +}; + +static void uic_unmask_irq(unsigned int virq) +{ + struct uic *uic = get_irq_chip_data(virq); + unsigned int src = uic_irq_to_hw(virq); + unsigned long flags; + u32 er; + + spin_lock_irqsave(&uic->lock, flags); + er = mfdcr(uic->dcrbase + UIC_ER); + er |= 1 << (31 - src); + mtdcr(uic->dcrbase + UIC_ER, er); + spin_unlock_irqrestore(&uic->lock, flags); +} + +static void uic_mask_irq(unsigned int virq) +{ + struct uic *uic = get_irq_chip_data(virq); + unsigned int src = uic_irq_to_hw(virq); + unsigned long flags; + u32 er; + + spin_lock_irqsave(&uic->lock, flags); + er = mfdcr(uic->dcrbase + UIC_ER); + er &= ~(1 << (31 - src)); + mtdcr(uic->dcrbase + UIC_ER, er); + spin_unlock_irqrestore(&uic->lock, flags); +} + +static void uic_ack_irq(unsigned int virq) +{ + struct uic *uic = get_irq_chip_data(virq); + unsigned int src = uic_irq_to_hw(virq); + unsigned long flags; + + spin_lock_irqsave(&uic->lock, flags); + mtdcr(uic->dcrbase + UIC_SR, 1 << (31-src)); + spin_unlock_irqrestore(&uic->lock, flags); +} + +static int uic_set_irq_type(unsigned int virq, unsigned int flow_type) +{ + struct uic *uic = get_irq_chip_data(virq); + unsigned int src = uic_irq_to_hw(virq); + struct irq_desc *desc = get_irq_desc(virq); + unsigned long flags; + int trigger, polarity; + u32 tr, pr, mask; + + switch (flow_type & IRQ_TYPE_SENSE_MASK) { + case IRQ_TYPE_NONE: + uic_mask_irq(virq); + return 0; + + case IRQ_TYPE_EDGE_RISING: + trigger = 1; polarity = 1; + break; + case IRQ_TYPE_EDGE_FALLING: + trigger = 1; polarity = 0; + break; + case IRQ_TYPE_LEVEL_HIGH: + trigger = 0; polarity = 1; + break; + case IRQ_TYPE_LEVEL_LOW: + trigger = 0; polarity = 0; + break; + default: + return -EINVAL; + } + + mask = ~(1 << (31 - src)); + + spin_lock_irqsave(&uic->lock, flags); + tr = mfdcr(uic->dcrbase + UIC_TR); + pr = mfdcr(uic->dcrbase + UIC_PR); + tr = (tr & mask) | (trigger << (31-src)); + pr = (pr & mask) | (polarity << (31-src)); + + mtdcr(uic->dcrbase + UIC_PR, pr); + mtdcr(uic->dcrbase + UIC_TR, tr); + + desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL); + desc->status |= flow_type & IRQ_TYPE_SENSE_MASK; + if (trigger) + desc->status |= IRQ_LEVEL; + + spin_unlock_irqrestore(&uic->lock, flags); + + return 0; +} + +static struct irq_chip uic_irq_chip = { + .typename = " UIC ", + .unmask = uic_unmask_irq, + .mask = uic_mask_irq, +/* .mask_ack = uic_mask_irq_and_ack, */ + .ack = uic_ack_irq, + .set_type = uic_set_irq_type, +}; + +static int uic_host_match(struct irq_host *h, struct device_node *node) +{ + struct uic *uic = h->host_data; + return uic->of_node == node; +} + +static int uic_host_map(struct irq_host *h, unsigned int virq, + irq_hw_number_t hw) +{ + struct uic *uic = h->host_data; + + set_irq_chip_data(virq, uic); + /* Despite the name, handle_level_irq() works for both level + * and edge irqs on UIC. FIXME: check this is correct */ + set_irq_chip_and_handler(virq, &uic_irq_chip, handle_level_irq); + + /* Set default irq type */ + set_irq_type(virq, IRQ_TYPE_NONE); + + return 0; +} + +static int uic_host_xlate(struct irq_host *h, struct device_node *ct, + u32 *intspec, unsigned int intsize, + irq_hw_number_t *out_hwirq, unsigned int *out_type) + +{ + /* UIC intspecs must have 2 cells */ + BUG_ON(intsize != 2); + *out_hwirq = intspec[0]; + *out_type = intspec[1]; + return 0; +} + +static struct irq_host_ops uic_host_ops = { + .match = uic_host_match, + .map = uic_host_map, + .xlate = uic_host_xlate, +}; + +irqreturn_t uic_cascade(int virq, void *data) +{ + struct uic *uic = data; + u32 msr; + int src; + int subvirq; + + msr = mfdcr(uic->dcrbase + UIC_MSR); + src = 32 - ffs(msr); + + subvirq = irq_linear_revmap(uic->irqhost, src); + generic_handle_irq(subvirq); + + return IRQ_HANDLED; +} + +static struct uic * __init uic_init_one(struct device_node *node) +{ + struct uic *uic; + const u32 *indexp, *dcrreg; + int len; + + BUG_ON(! device_is_compatible(node, "ibm,uic")); + + uic = alloc_bootmem(sizeof(*uic)); + if (! uic) + return NULL; /* FIXME: panic? */ + + memset(uic, 0, sizeof(*uic)); + spin_lock_init(&uic->lock); + uic->of_node = of_node_get(node); + indexp = of_get_property(node, "cell-index", &len); + if (!indexp || (len != sizeof(u32))) { + printk(KERN_ERR "uic: Device node %s has missing or invalid " + "cell-index property\n", node->full_name); + return NULL; + } + uic->index = *indexp; + + dcrreg = of_get_property(node, "dcr-reg", &len); + if (!dcrreg || (len != 2*sizeof(u32))) { + printk(KERN_ERR "uic: Device node %s has missing or invalid " + "dcr-reg property\n", node->full_name); + return NULL; + } + uic->dcrbase = *dcrreg; + + uic->irqhost = irq_alloc_host(IRQ_HOST_MAP_LINEAR, NR_UIC_INTS, + &uic_host_ops, -1); + if (! uic->irqhost) { + of_node_put(node); + return NULL; /* FIXME: panic? */ + } + + uic->irqhost->host_data = uic; + + /* Start with all interrupts disabled, level and non-critical */ + mtdcr(uic->dcrbase + UIC_ER, 0); + mtdcr(uic->dcrbase + UIC_CR, 0); + mtdcr(uic->dcrbase + UIC_TR, 0); + /* Clear any pending interrupts, in case the firmware left some */ + mtdcr(uic->dcrbase + UIC_SR, 0xffffffff); + + printk ("UIC%d (%d IRQ sources) at DCR 0x%x\n", uic->index, + NR_UIC_INTS, uic->dcrbase); + + return uic; +} + +void __init uic_init_tree(void) +{ + struct device_node *np; + struct uic *uic; + const u32 *interrupts; + + /* First locate and initialize the top-level UIC */ + + np = of_find_compatible_node(NULL, NULL, "ibm,uic"); + while (np) { + interrupts = of_get_property(np, "interrupts", NULL); + if (! interrupts) + break; + + np = of_find_compatible_node(np, NULL, "ibm,uic"); + } + + BUG_ON(!np); /* uic_init_tree() assumes there's a UIC as the + * top-level interrupt controller */ + primary_uic = uic_init_one(np); + if (! primary_uic) + panic("Unable to initialize primary UIC %s\n", np->full_name); + + irq_set_default_host(primary_uic->irqhost); + of_node_put(np); + + /* The scan again for cascaded UICs */ + np = of_find_compatible_node(NULL, NULL, "ibm,uic"); + while (np) { + interrupts = of_get_property(np, "interrupts", NULL); + if (interrupts) { + /* Secondary UIC */ + int cascade_virq; + int ret; + + uic = uic_init_one(np); + if (! uic) + panic("Unable to initialize a secondary UIC %s\n", + np->full_name); + + cascade_virq = irq_of_parse_and_map(np, 0); + + uic->cascade.handler = uic_cascade; + uic->cascade.name = "UIC cascade"; + uic->cascade.dev_id = uic; + + ret = setup_irq(cascade_virq, &uic->cascade); + if (ret) + printk(KERN_ERR "Failed to setup_irq(%d) for " + "UIC%d cascade\n", cascade_virq, + uic->index); + + /* FIXME: setup critical cascade?? */ + } + + np = of_find_compatible_node(np, NULL, "ibm,uic"); + } +} + +/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */ +unsigned int uic_get_irq(void) +{ + u32 msr; + int src; + + BUG_ON(! primary_uic); + + msr = mfdcr(primary_uic->dcrbase + UIC_MSR); + src = 32 - ffs(msr); + + return irq_linear_revmap(primary_uic->irqhost, src); +} diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index bf299b66f3fc..b481db1dacb4 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -330,18 +330,17 @@ static void release_output_lock(void) static int xmon_core(struct pt_regs *regs, int fromipi) { int cmd = 0; - unsigned long msr; struct bpt *bp; long recurse_jmp[JMP_BUF_LEN]; unsigned long offset; + unsigned long flags; #ifdef CONFIG_SMP int cpu; int secondary; unsigned long timeout; #endif - msr = mfmsr(); - mtmsr(msr & ~MSR_EE); /* disable interrupts */ + local_irq_save(flags); bp = in_breakpoint_table(regs->nip, &offset); if (bp != NULL) { @@ -516,7 +515,7 @@ static int xmon_core(struct pt_regs *regs, int fromipi) insert_cpu_bpts(); - mtmsr(msr); /* restore interrupt enable */ + local_irq_restore(flags); return cmd != 'X' && cmd != EOF; } @@ -1360,8 +1359,12 @@ static void print_bug_trap(struct pt_regs *regs) if (is_warning_bug(bug)) return; +#ifdef CONFIG_DEBUG_BUGVERBOSE printf("kernel BUG at %s:%u!\n", bug->file, bug->line); +#else + printf("kernel BUG at %p!\n", (void *)bug->bug_addr); +#endif } void excprint(struct pt_regs *fp) diff --git a/arch/ppc/8xx_io/Kconfig b/arch/ppc/8xx_io/Kconfig index 57dacf978532..c623e44f01ad 100644 --- a/arch/ppc/8xx_io/Kconfig +++ b/arch/ppc/8xx_io/Kconfig @@ -74,10 +74,6 @@ config ENET_BIG_BUFFERS Allocate large buffers for MPC8xx Ethernet. Increases throughput and decreases the likelihood of dropped packets, but costs memory. -config HTDMSOUND - bool "Embedded Planet HIOX Audio" - depends on SOUND=y - # This doesn't really belong here, but it is convenient to ask # 8xx specific questions. comment "Generic MPC8xx Options" diff --git a/arch/ppc/8xx_io/Makefile b/arch/ppc/8xx_io/Makefile index d8760181fe99..1051a06df7e0 100644 --- a/arch/ppc/8xx_io/Makefile +++ b/arch/ppc/8xx_io/Makefile @@ -7,4 +7,3 @@ obj-y := commproc.o obj-$(CONFIG_FEC_ENET) += fec.o obj-$(CONFIG_SCC_ENET) += enet.o obj-$(CONFIG_UCODE_PATCH) += micropatch.o -obj-$(CONFIG_HTDMSOUND) += cs4218_tdm.o diff --git a/arch/ppc/8xx_io/cs4218.h b/arch/ppc/8xx_io/cs4218.h deleted file mode 100644 index e5f943045afa..000000000000 --- a/arch/ppc/8xx_io/cs4218.h +++ /dev/null @@ -1,166 +0,0 @@ -#ifndef _cs4218_h_ -/* - * Hacked version of linux/drivers/sound/dmasound/dmasound.h - * - * - * Minor numbers for the sound driver. - * - * Unfortunately Creative called the codec chip of SB as a DSP. For this - * reason the /dev/dsp is reserved for digitized audio use. There is a - * device for true DSP processors but it will be called something else. - * In v3.0 it's /dev/sndproc but this could be a temporary solution. - */ -#define _cs4218_h_ - -#include <linux/types.h> - -#define SND_NDEVS 256 /* Number of supported devices */ -#define SND_DEV_CTL 0 /* Control port /dev/mixer */ -#define SND_DEV_SEQ 1 /* Sequencer output /dev/sequencer (FM - synthesizer and MIDI output) */ -#define SND_DEV_MIDIN 2 /* Raw midi access */ -#define SND_DEV_DSP 3 /* Digitized voice /dev/dsp */ -#define SND_DEV_AUDIO 4 /* Sparc compatible /dev/audio */ -#define SND_DEV_DSP16 5 /* Like /dev/dsp but 16 bits/sample */ -#define SND_DEV_STATUS 6 /* /dev/sndstat */ -/* #7 not in use now. Was in 2.4. Free for use after v3.0. */ -#define SND_DEV_SEQ2 8 /* /dev/sequencer, level 2 interface */ -#define SND_DEV_SNDPROC 9 /* /dev/sndproc for programmable devices */ -#define SND_DEV_PSS SND_DEV_SNDPROC - -/* switch on various prinks */ -#define DEBUG_DMASOUND 1 - -#define MAX_AUDIO_DEV 5 -#define MAX_MIXER_DEV 4 -#define MAX_SYNTH_DEV 3 -#define MAX_MIDI_DEV 6 -#define MAX_TIMER_DEV 3 - -#define MAX_CATCH_RADIUS 10 - -#define le2be16(x) (((x)<<8 & 0xff00) | ((x)>>8 & 0x00ff)) -#define le2be16dbl(x) (((x)<<8 & 0xff00ff00) | ((x)>>8 & 0x00ff00ff)) - -#define IOCTL_IN(arg, ret) \ - do { int error = get_user(ret, (int *)(arg)); \ - if (error) return error; \ - } while (0) -#define IOCTL_OUT(arg, ret) ioctl_return((int *)(arg), ret) - -static inline int ioctl_return(int *addr, int value) -{ - return value < 0 ? value : put_user(value, addr); -} - -#define HAS_RECORD - - /* - * Initialization - */ - -/* description of the set-up applies to either hard or soft settings */ - -typedef struct { - int format; /* AFMT_* */ - int stereo; /* 0 = mono, 1 = stereo */ - int size; /* 8/16 bit*/ - int speed; /* speed */ -} SETTINGS; - - /* - * Machine definitions - */ - -typedef struct { - const char *name; - const char *name2; - void (*open)(void); - void (*release)(void); - void *(*dma_alloc)(unsigned int, gfp_t); - void (*dma_free)(void *, unsigned int); - int (*irqinit)(void); -#ifdef MODULE - void (*irqcleanup)(void); -#endif - void (*init)(void); - void (*silence)(void); - int (*setFormat)(int); - int (*setVolume)(int); - int (*setBass)(int); - int (*setTreble)(int); - int (*setGain)(int); - void (*play)(void); - void (*record)(void); /* optional */ - void (*mixer_init)(void); /* optional */ - int (*mixer_ioctl)(u_int, u_long); /* optional */ - int (*write_sq_setup)(void); /* optional */ - int (*read_sq_setup)(void); /* optional */ - int (*sq_open)(mode_t); /* optional */ - int (*state_info)(char *, size_t); /* optional */ - void (*abort_read)(void); /* optional */ - int min_dsp_speed; - int max_dsp_speed; - int version ; - int hardware_afmts ; /* OSS says we only return h'ware info */ - /* when queried via SNDCTL_DSP_GETFMTS */ - int capabilities ; /* low-level reply to SNDCTL_DSP_GETCAPS */ - SETTINGS default_hard ; /* open() or init() should set something valid */ - SETTINGS default_soft ; /* you can make it look like old OSS, if you want to */ -} MACHINE; - - /* - * Low level stuff - */ - -typedef struct { - ssize_t (*ct_ulaw)(const u_char *, size_t, u_char *, ssize_t *, ssize_t); - ssize_t (*ct_alaw)(const u_char *, size_t, u_char *, ssize_t *, ssize_t); - ssize_t (*ct_s8)(const u_char *, size_t, u_char *, ssize_t *, ssize_t); - ssize_t (*ct_u8)(const u_char *, size_t, u_char *, ssize_t *, ssize_t); - ssize_t (*ct_s16be)(const u_char *, size_t, u_char *, ssize_t *, ssize_t); - ssize_t (*ct_u16be)(const u_char *, size_t, u_char *, ssize_t *, ssize_t); - ssize_t (*ct_s16le)(const u_char *, size_t, u_char *, ssize_t *, ssize_t); - ssize_t (*ct_u16le)(const u_char *, size_t, u_char *, ssize_t *, ssize_t); -} TRANS; - - - /* - * Sound queue stuff, the heart of the driver - */ - -struct sound_queue { - /* buffers allocated for this queue */ - int numBufs; /* real limits on what the user can have */ - int bufSize; /* in bytes */ - char **buffers; - - /* current parameters */ - int locked ; /* params cannot be modified when != 0 */ - int user_frags ; /* user requests this many */ - int user_frag_size ; /* of this size */ - int max_count; /* actual # fragments <= numBufs */ - int block_size; /* internal block size in bytes */ - int max_active; /* in-use fragments <= max_count */ - - /* it shouldn't be necessary to declare any of these volatile */ - int front, rear, count; - int rear_size; - /* - * The use of the playing field depends on the hardware - * - * Atari, PMac: The number of frames that are loaded/playing - * - * Amiga: Bit 0 is set: a frame is loaded - * Bit 1 is set: a frame is playing - */ - int active; - wait_queue_head_t action_queue, open_queue, sync_queue; - int open_mode; - int busy, syncing, xruns, died; -}; - -#define SLEEP(queue) interruptible_sleep_on_timeout(&queue, HZ) -#define WAKE_UP(queue) (wake_up_interruptible(&queue)) - -#endif /* _cs4218_h_ */ diff --git a/arch/ppc/8xx_io/cs4218_tdm.c b/arch/ppc/8xx_io/cs4218_tdm.c deleted file mode 100644 index a956f28ab162..000000000000 --- a/arch/ppc/8xx_io/cs4218_tdm.c +++ /dev/null @@ -1,2833 +0,0 @@ - -/* This is a modified version of linux/drivers/sound/dmasound.c to - * support the CS4218 codec on the 8xx TDM port. Thanks to everyone - * that contributed to the dmasound software (which includes me :-). - * - * The CS4218 is configured in Mode 4, sub-mode 0. This provides - * left/right data only on the TDM port, as a 32-bit word, per frame - * pulse. The control of the CS4218 is provided by some other means, - * like the SPI port. - * Dan Malek (dmalek@jlc.net) - */ - -#include <linux/module.h> -#include <linux/sched.h> -#include <linux/timer.h> -#include <linux/major.h> -#include <linux/fcntl.h> -#include <linux/errno.h> -#include <linux/mm.h> -#include <linux/slab.h> -#include <linux/sound.h> -#include <linux/init.h> -#include <linux/delay.h> - -#include <asm/system.h> -#include <asm/irq.h> -#include <asm/pgtable.h> -#include <asm/uaccess.h> -#include <asm/io.h> - -/* Should probably do something different with this path name..... - * Actually, I should just stop using it... - */ -#include "cs4218.h" -#include <linux/soundcard.h> - -#include <asm/mpc8xx.h> -#include <asm/8xx_immap.h> -#include <asm/commproc.h> - -#define DMASND_CS4218 5 - -#define MAX_CATCH_RADIUS 10 -#define MIN_BUFFERS 4 -#define MIN_BUFSIZE 4 -#define MAX_BUFSIZE 128 - -#define HAS_8BIT_TABLES - -static int sq_unit = -1; -static int mixer_unit = -1; -static int state_unit = -1; -static int irq_installed = 0; -static char **sound_buffers = NULL; -static char **sound_read_buffers = NULL; - -static DEFINE_SPINLOCK(cs4218_lock); - -/* Local copies of things we put in the control register. Output - * volume, like most codecs is really attenuation. - */ -static int cs4218_rate_index; - -/* - * Stuff for outputting a beep. The values range from -327 to +327 - * so we can multiply by an amplitude in the range 0..100 to get a - * signed short value to put in the output buffer. - */ -static short beep_wform[256] = { - 0, 40, 79, 117, 153, 187, 218, 245, - 269, 288, 304, 316, 323, 327, 327, 324, - 318, 310, 299, 288, 275, 262, 249, 236, - 224, 213, 204, 196, 190, 186, 183, 182, - 182, 183, 186, 189, 192, 196, 200, 203, - 206, 208, 209, 209, 209, 207, 204, 201, - 197, 193, 188, 183, 179, 174, 170, 166, - 163, 161, 160, 159, 159, 160, 161, 162, - 164, 166, 168, 169, 171, 171, 171, 170, - 169, 167, 163, 159, 155, 150, 144, 139, - 133, 128, 122, 117, 113, 110, 107, 105, - 103, 103, 103, 103, 104, 104, 105, 105, - 105, 103, 101, 97, 92, 86, 78, 68, - 58, 45, 32, 18, 3, -11, -26, -41, - -55, -68, -79, -88, -95, -100, -102, -102, - -99, -93, -85, -75, -62, -48, -33, -16, - 0, 16, 33, 48, 62, 75, 85, 93, - 99, 102, 102, 100, 95, 88, 79, 68, - 55, 41, 26, 11, -3, -18, -32, -45, - -58, -68, -78, -86, -92, -97, -101, -103, - -105, -105, -105, -104, -104, -103, -103, -103, - -103, -105, -107, -110, -113, -117, -122, -128, - -133, -139, -144, -150, -155, -159, -163, -167, - -169, -170, -171, -171, -171, -169, -168, -166, - -164, -162, -161, -160, -159, -159, -160, -161, - -163, -166, -170, -174, -179, -183, -188, -193, - -197, -201, -204, -207, -209, -209, -209, -208, - -206, -203, -200, -196, -192, -189, -186, -183, - -182, -182, -183, -186, -190, -196, -204, -213, - -224, -236, -249, -262, -275, -288, -299, -310, - -318, -324, -327, -327, -323, -316, -304, -288, - -269, -245, -218, -187, -153, -117, -79, -40, -}; - -#define BEEP_SPEED 5 /* 22050 Hz sample rate */ -#define BEEP_BUFLEN 512 -#define BEEP_VOLUME 15 /* 0 - 100 */ - -static int beep_volume = BEEP_VOLUME; -static int beep_playing = 0; -static int beep_state = 0; -static short *beep_buf; -static void (*orig_mksound)(unsigned int, unsigned int); - -/* This is found someplace else......I guess in the keyboard driver - * we don't include. - */ -static void (*kd_mksound)(unsigned int, unsigned int); - -static int catchRadius = 0; -static int numBufs = 4, bufSize = 32; -static int numReadBufs = 4, readbufSize = 32; - - -/* TDM/Serial transmit and receive buffer descriptors. -*/ -static volatile cbd_t *rx_base, *rx_cur, *tx_base, *tx_cur; - -module_param(catchRadius, int, 0); -module_param(numBufs, int, 0); -module_param(bufSize, int, 0); -module_param(numreadBufs, int, 0); -module_param(readbufSize, int, 0); - -#define arraysize(x) (sizeof(x)/sizeof(*(x))) -#define le2be16(x) (((x)<<8 & 0xff00) | ((x)>>8 & 0x00ff)) -#define le2be16dbl(x) (((x)<<8 & 0xff00ff00) | ((x)>>8 & 0x00ff00ff)) - -#define IOCTL_IN(arg, ret) \ - do { int error = get_user(ret, (int *)(arg)); \ - if (error) return error; \ - } while (0) -#define IOCTL_OUT(arg, ret) ioctl_return((int *)(arg), ret) - -/* CS4218 serial port control in mode 4. -*/ -#define CS_INTMASK ((uint)0x40000000) -#define CS_DO1 ((uint)0x20000000) -#define CS_LATTEN ((uint)0x1f000000) -#define CS_RATTEN ((uint)0x00f80000) -#define CS_MUTE ((uint)0x00040000) -#define CS_ISL ((uint)0x00020000) -#define CS_ISR ((uint)0x00010000) -#define CS_LGAIN ((uint)0x0000f000) -#define CS_RGAIN ((uint)0x00000f00) - -#define CS_LATTEN_SET(X) (((X) & 0x1f) << 24) -#define CS_RATTEN_SET(X) (((X) & 0x1f) << 19) -#define CS_LGAIN_SET(X) (((X) & 0x0f) << 12) -#define CS_RGAIN_SET(X) (((X) & 0x0f) << 8) - -#define CS_LATTEN_GET(X) (((X) >> 24) & 0x1f) -#define CS_RATTEN_GET(X) (((X) >> 19) & 0x1f) -#define CS_LGAIN_GET(X) (((X) >> 12) & 0x0f) -#define CS_RGAIN_GET(X) (((X) >> 8) & 0x0f) - -/* The control register is effectively write only. We have to keep a copy - * of what we write. - */ -static uint cs4218_control; - -/* A place to store expanding information. -*/ -static int expand_bal; -static int expand_data; - -/* Since I can't make the microcode patch work for the SPI, I just - * clock the bits using software. - */ -static void sw_spi_init(void); -static void sw_spi_io(u_char *obuf, u_char *ibuf, uint bcnt); -static uint cs4218_ctl_write(uint ctlreg); - -/*** Some low level helpers **************************************************/ - -/* 16 bit mu-law */ - -static short ulaw2dma16[] = { - -32124, -31100, -30076, -29052, -28028, -27004, -25980, -24956, - -23932, -22908, -21884, -20860, -19836, -18812, -17788, -16764, - -15996, -15484, -14972, -14460, -13948, -13436, -12924, -12412, - -11900, -11388, -10876, -10364, -9852, -9340, -8828, -8316, - -7932, -7676, -7420, -7164, -6908, -6652, -6396, -6140, - -5884, -5628, -5372, -5116, -4860, -4604, -4348, -4092, - -3900, -3772, -3644, -3516, -3388, -3260, -3132, -3004, - -2876, -2748, -2620, -2492, -2364, -2236, -2108, -1980, - -1884, -1820, -1756, -1692, -1628, -1564, -1500, -1436, - -1372, -1308, -1244, -1180, -1116, -1052, -988, -924, - -876, -844, -812, -780, -748, -716, -684, -652, - -620, -588, -556, -524, -492, -460, -428, -396, - -372, -356, -340, -324, -308, -292, -276, -260, - -244, -228, -212, -196, -180, -164, -148, -132, - -120, -112, -104, -96, -88, -80, -72, -64, - -56, -48, -40, -32, -24, -16, -8, 0, - 32124, 31100, 30076, 29052, 28028, 27004, 25980, 24956, - 23932, 22908, 21884, 20860, 19836, 18812, 17788, 16764, - 15996, 15484, 14972, 14460, 13948, 13436, 12924, 12412, - 11900, 11388, 10876, 10364, 9852, 9340, 8828, 8316, - 7932, 7676, 7420, 7164, 6908, 6652, 6396, 6140, - 5884, 5628, 5372, 5116, 4860, 4604, 4348, 4092, - 3900, 3772, 3644, 3516, 3388, 3260, 3132, 3004, - 2876, 2748, 2620, 2492, 2364, 2236, 2108, 1980, - 1884, 1820, 1756, 1692, 1628, 1564, 1500, 1436, - 1372, 1308, 1244, 1180, 1116, 1052, 988, 924, - 876, 844, 812, 780, 748, 716, 684, 652, - 620, 588, 556, 524, 492, 460, 428, 396, - 372, 356, 340, 324, 308, 292, 276, 260, - 244, 228, 212, 196, 180, 164, 148, 132, - 120, 112, 104, 96, 88, 80, 72, 64, - 56, 48, 40, 32, 24, 16, 8, 0, -}; - -/* 16 bit A-law */ - -static short alaw2dma16[] = { - -5504, -5248, -6016, -5760, -4480, -4224, -4992, -4736, - -7552, -7296, -8064, -7808, -6528, -6272, -7040, -6784, - -2752, -2624, -3008, -2880, -2240, -2112, -2496, -2368, - -3776, -3648, -4032, -3904, -3264, -3136, -3520, -3392, - -22016, -20992, -24064, -23040, -17920, -16896, -19968, -18944, - -30208, -29184, -32256, -31232, -26112, -25088, -28160, -27136, - -11008, -10496, -12032, -11520, -8960, -8448, -9984, -9472, - -15104, -14592, -16128, -15616, -13056, -12544, -14080, -13568, - -344, -328, -376, -360, -280, -264, -312, -296, - -472, -456, -504, -488, -408, -392, -440, -424, - -88, -72, -120, -104, -24, -8, -56, -40, - -216, -200, -248, -232, -152, -136, -184, -168, - -1376, -1312, -1504, -1440, -1120, -1056, -1248, -1184, - -1888, -1824, -2016, -1952, -1632, -1568, -1760, -1696, - -688, -656, -752, -720, -560, -528, -624, -592, - -944, -912, -1008, -976, -816, -784, -880, -848, - 5504, 5248, 6016, 5760, 4480, 4224, 4992, 4736, - 7552, 7296, 8064, 7808, 6528, 6272, 7040, 6784, - 2752, 2624, 3008, 2880, 2240, 2112, 2496, 2368, - 3776, 3648, 4032, 3904, 3264, 3136, 3520, 3392, - 22016, 20992, 24064, 23040, 17920, 16896, 19968, 18944, - 30208, 29184, 32256, 31232, 26112, 25088, 28160, 27136, - 11008, 10496, 12032, 11520, 8960, 8448, 9984, 9472, - 15104, 14592, 16128, 15616, 13056, 12544, 14080, 13568, - 344, 328, 376, 360, 280, 264, 312, 296, - 472, 456, 504, 488, 408, 392, 440, 424, - 88, 72, 120, 104, 24, 8, 56, 40, - 216, 200, 248, 232, 152, 136, 184, 168, - 1376, 1312, 1504, 1440, 1120, 1056, 1248, 1184, - 1888, 1824, 2016, 1952, 1632, 1568, 1760, 1696, - 688, 656, 752, 720, 560, 528, 624, 592, - 944, 912, 1008, 976, 816, 784, 880, 848, -}; - - -/*** Translations ************************************************************/ - - -static ssize_t cs4218_ct_law(const u_char *userPtr, size_t userCount, - u_char frame[], ssize_t *frameUsed, - ssize_t frameLeft); -static ssize_t cs4218_ct_s8(const u_char *userPtr, size_t userCount, - u_char frame[], ssize_t *frameUsed, - ssize_t frameLeft); -static ssize_t cs4218_ct_u8(const u_char *userPtr, size_t userCount, - u_char frame[], ssize_t *frameUsed, - ssize_t frameLeft); -static ssize_t cs4218_ct_s16(const u_char *userPtr, size_t userCount, - u_char frame[], ssize_t *frameUsed, - ssize_t frameLeft); -static ssize_t cs4218_ct_u16(const u_char *userPtr, size_t userCount, - u_char frame[], ssize_t *frameUsed, - ssize_t frameLeft); -static ssize_t cs4218_ctx_law(const u_char *userPtr, size_t userCount, - u_char frame[], ssize_t *frameUsed, - ssize_t frameLeft); -static ssize_t cs4218_ctx_s8(const u_char *userPtr, size_t userCount, - u_char frame[], ssize_t *frameUsed, - ssize_t frameLeft); -static ssize_t cs4218_ctx_u8(const u_char *userPtr, size_t userCount, - u_char frame[], ssize_t *frameUsed, - ssize_t frameLeft); -static ssize_t cs4218_ctx_s16(const u_char *userPtr, size_t userCount, - u_char frame[], ssize_t *frameUsed, - ssize_t frameLeft); -static ssize_t cs4218_ctx_u16(const u_char *userPtr, size_t userCount, - u_char frame[], ssize_t *frameUsed, - ssize_t frameLeft); -static ssize_t cs4218_ct_s16_read(const u_char *userPtr, size_t userCount, - u_char frame[], ssize_t *frameUsed, - ssize_t frameLeft); -static ssize_t cs4218_ct_u16_read(const u_char *userPtr, size_t userCount, - u_char frame[], ssize_t *frameUsed, - ssize_t frameLeft); - - -/*** Low level stuff *********************************************************/ - -struct cs_sound_settings { - MACHINE mach; /* machine dependent things */ - SETTINGS hard; /* hardware settings */ - SETTINGS soft; /* software settings */ - SETTINGS dsp; /* /dev/dsp default settings */ - TRANS *trans_write; /* supported translations for playback */ - TRANS *trans_read; /* supported translations for record */ - int volume_left; /* volume (range is machine dependent) */ - int volume_right; - int bass; /* tone (range is machine dependent) */ - int treble; - int gain; - int minDev; /* minor device number currently open */ -}; - -static struct cs_sound_settings sound; - -static void *CS_Alloc(unsigned int size, gfp_t flags); -static void CS_Free(void *ptr, unsigned int size); -static int CS_IrqInit(void); -#ifdef MODULE -static void CS_IrqCleanup(void); -#endif /* MODULE */ -static void CS_Silence(void); -static void CS_Init(void); -static void CS_Play(void); -static void CS_Record(void); -static int CS_SetFormat(int format); -static int CS_SetVolume(int volume); -static void cs4218_tdm_tx_intr(void *devid); -static void cs4218_tdm_rx_intr(void *devid); -static void cs4218_intr(void *devid); -static int cs_get_volume(uint reg); -static int cs_volume_setter(int volume, int mute); -static int cs_get_gain(uint reg); -static int cs_set_gain(int gain); -static void cs_mksound(unsigned int hz, unsigned int ticks); -static void cs_nosound(unsigned long xx); - -/*** Mid level stuff *********************************************************/ - - -static void sound_silence(void); -static void sound_init(void); -static int sound_set_format(int format); -static int sound_set_speed(int speed); -static int sound_set_stereo(int stereo); -static int sound_set_volume(int volume); - -static ssize_t sound_copy_translate(const u_char *userPtr, - size_t userCount, - u_char frame[], ssize_t *frameUsed, - ssize_t frameLeft); -static ssize_t sound_copy_translate_read(const u_char *userPtr, - size_t userCount, - u_char frame[], ssize_t *frameUsed, - ssize_t frameLeft); - - -/* - * /dev/mixer abstraction - */ - -struct sound_mixer { - int busy; - int modify_counter; -}; - -static struct sound_mixer mixer; - -static struct sound_queue sq; -static struct sound_queue read_sq; - -#define sq_block_address(i) (sq.buffers[i]) -#define SIGNAL_RECEIVED (signal_pending(current)) -#define NON_BLOCKING(open_mode) (open_mode & O_NONBLOCK) -#define ONE_SECOND HZ /* in jiffies (100ths of a second) */ -#define NO_TIME_LIMIT 0xffffffff - -/* - * /dev/sndstat - */ - -struct sound_state { - int busy; - char buf[512]; - int len, ptr; -}; - -static struct sound_state state; - -/*** Common stuff ********************************************************/ - -static long long sound_lseek(struct file *file, long long offset, int orig); - -/*** Config & Setup **********************************************************/ - -void dmasound_setup(char *str, int *ints); - -/*** Translations ************************************************************/ - - -/* ++TeSche: radically changed for new expanding purposes... - * - * These two routines now deal with copying/expanding/translating the samples - * from user space into our buffer at the right frequency. They take care about - * how much data there's actually to read, how much buffer space there is and - * to convert samples into the right frequency/encoding. They will only work on - * complete samples so it may happen they leave some bytes in the input stream - * if the user didn't write a multiple of the current sample size. They both - * return the number of bytes they've used from both streams so you may detect - * such a situation. Luckily all programs should be able to cope with that. - * - * I think I've optimized anything as far as one can do in plain C, all - * variables should fit in registers and the loops are really short. There's - * one loop for every possible situation. Writing a more generalized and thus - * parameterized loop would only produce slower code. Feel free to optimize - * this in assembler if you like. :) - * - * I think these routines belong here because they're not yet really hardware - * independent, especially the fact that the Falcon can play 16bit samples - * only in stereo is hardcoded in both of them! - * - * ++geert: split in even more functions (one per format) - */ - -static ssize_t cs4218_ct_law(const u_char *userPtr, size_t userCount, - u_char frame[], ssize_t *frameUsed, - ssize_t frameLeft) -{ - short *table = sound.soft.format == AFMT_MU_LAW ? ulaw2dma16: alaw2dma16; - ssize_t count, used; - short *p = (short *) &frame[*frameUsed]; - int val, stereo = sound.soft.stereo; - - frameLeft >>= 2; - if (stereo) - userCount >>= 1; - used = count = min(userCount, frameLeft); - while (count > 0) { - u_char data; - if (get_user(data, userPtr++)) - return -EFAULT; - val = table[data]; - *p++ = val; - if (stereo) { - if (get_user(data, userPtr++)) - return -EFAULT; - val = table[data]; - } - *p++ = val; - count--; - } - *frameUsed += used * 4; - return stereo? used * 2: used; -} - - -static ssize_t cs4218_ct_s8(const u_char *userPtr, size_t userCount, - u_char frame[], ssize_t *frameUsed, - ssize_t frameLeft) -{ - ssize_t count, used; - short *p = (short *) &frame[*frameUsed]; - int val, stereo = sound.soft.stereo; - - frameLeft >>= 2; - if (stereo) - userCount >>= 1; - used = count = min(userCount, frameLeft); - while (count > 0) { - u_char data; - if (get_user(data, userPtr++)) - return -EFAULT; - val = data << 8; - *p++ = val; - if (stereo) { - if (get_user(data, userPtr++)) - return -EFAULT; - val = data << 8; - } - *p++ = val; - count--; - } - *frameUsed += used * 4; - return stereo? used * 2: used; -} - - -static ssize_t cs4218_ct_u8(const u_char *userPtr, size_t userCount, - u_char frame[], ssize_t *frameUsed, - ssize_t frameLeft) -{ - ssize_t count, used; - short *p = (short *) &frame[*frameUsed]; - int val, stereo = sound.soft.stereo; - - frameLeft >>= 2; - if (stereo) - userCount >>= 1; - used = count = min(userCount, frameLeft); - while (count > 0) { - u_char data; - if (get_user(data, userPtr++)) - return -EFAULT; - val = (data ^ 0x80) << 8; - *p++ = val; - if (stereo) { - if (get_user(data, userPtr++)) - return -EFAULT; - val = (data ^ 0x80) << 8; - } - *p++ = val; - count--; - } - *frameUsed += used * 4; - return stereo? used * 2: used; -} - - -/* This is the default format of the codec. Signed, 16-bit stereo - * generated by an application shouldn't have to be copied at all. - * We should just get the phsical address of the buffers and update - * the TDM BDs directly. - */ -static ssize_t cs4218_ct_s16(const u_char *userPtr, size_t userCount, - u_char frame[], ssize_t *frameUsed, - ssize_t frameLeft) -{ - ssize_t count, used; - int stereo = sound.soft.stereo; - short *fp = (short *) &frame[*frameUsed]; - - frameLeft >>= 2; - userCount >>= (stereo? 2: 1); - used = count = min(userCount, frameLeft); - if (!stereo) { - short *up = (short *) userPtr; - while (count > 0) { - short data; - if (get_user(data, up++)) - return -EFAULT; - *fp++ = data; - *fp++ = data; - count--; - } - } else { - if (copy_from_user(fp, userPtr, count * 4)) - return -EFAULT; - } - *frameUsed += used * 4; - return stereo? used * 4: used * 2; -} - -static ssize_t cs4218_ct_u16(const u_char *userPtr, size_t userCount, - u_char frame[], ssize_t *frameUsed, - ssize_t frameLeft) -{ - ssize_t count, used; - int mask = (sound.soft.format == AFMT_U16_LE? 0x0080: 0x8000); - int stereo = sound.soft.stereo; - short *fp = (short *) &frame[*frameUsed]; - short *up = (short *) userPtr; - - frameLeft >>= 2; - userCount >>= (stereo? 2: 1); - used = count = min(userCount, frameLeft); - while (count > 0) { - int data; - if (get_user(data, up++)) - return -EFAULT; - data ^= mask; - *fp++ = data; - if (stereo) { - if (get_user(data, up++)) - return -EFAULT; - data ^= mask; - } - *fp++ = data; - count--; - } - *frameUsed += used * 4; - return stereo? used * 4: used * 2; -} - - -static ssize_t cs4218_ctx_law(const u_char *userPtr, size_t userCount, - u_char frame[], ssize_t *frameUsed, - ssize_t frameLeft) -{ - unsigned short *table = (unsigned short *) - (sound.soft.format == AFMT_MU_LAW ? ulaw2dma16: alaw2dma16); - unsigned int data = expand_data; - unsigned int *p = (unsigned int *) &frame[*frameUsed]; - int bal = expand_bal; - int hSpeed = sound.hard.speed, sSpeed = sound.soft.speed; - int utotal, ftotal; - int stereo = sound.soft.stereo; - - frameLeft >>= 2; - if (stereo) - userCount >>= 1; - ftotal = frameLeft; - utotal = userCount; - while (frameLeft) { - u_char c; - if (bal < 0) { - if (userCount == 0) - break; - if (get_user(c, userPtr++)) - return -EFAULT; - data = table[c]; - if (stereo) { - if (get_user(c, userPtr++)) - return -EFAULT; - data = (data << 16) + table[c]; - } else - data = (data << 16) + data; - userCount--; - bal += hSpeed; - } - *p++ = data; - frameLeft--; - bal -= sSpeed; - } - expand_bal = bal; - expand_data = data; - *frameUsed += (ftotal - frameLeft) * 4; - utotal -= userCount; - return stereo? utotal * 2: utotal; -} - - -static ssize_t cs4218_ctx_s8(const u_char *userPtr, size_t userCount, - u_char frame[], ssize_t *frameUsed, - ssize_t frameLeft) -{ - unsigned int *p = (unsigned int *) &frame[*frameUsed]; - unsigned int data = expand_data; - int bal = expand_bal; - int hSpeed = sound.hard.speed, sSpeed = sound.soft.speed; - int stereo = sound.soft.stereo; - int utotal, ftotal; - - frameLeft >>= 2; - if (stereo) - userCount >>= 1; - ftotal = frameLeft; - utotal = userCount; - while (frameLeft) { - u_char c; - if (bal < 0) { - if (userCount == 0) - break; - if (get_user(c, userPtr++)) - return -EFAULT; - data = c << 8; - if (stereo) { - if (get_user(c, userPtr++)) - return -EFAULT; - data = (data << 16) + (c << 8); - } else - data = (data << 16) + data; - userCount--; - bal += hSpeed; - } - *p++ = data; - frameLeft--; - bal -= sSpeed; - } - expand_bal = bal; - expand_data = data; - *frameUsed += (ftotal - frameLeft) * 4; - utotal -= userCount; - return stereo? utotal * 2: utotal; -} - - -static ssize_t cs4218_ctx_u8(const u_char *userPtr, size_t userCount, - u_char frame[], ssize_t *frameUsed, - ssize_t frameLeft) -{ - unsigned int *p = (unsigned int *) &frame[*frameUsed]; - unsigned int data = expand_data; - int bal = expand_bal; - int hSpeed = sound.hard.speed, sSpeed = sound.soft.speed; - int stereo = sound.soft.stereo; - int utotal, ftotal; - - frameLeft >>= 2; - if (stereo) - userCount >>= 1; - ftotal = frameLeft; - utotal = userCount; - while (frameLeft) { - u_char c; - if (bal < 0) { - if (userCount == 0) - break; - if (get_user(c, userPtr++)) - return -EFAULT; - data = (c ^ 0x80) << 8; - if (stereo) { - if (get_user(c, userPtr++)) - return -EFAULT; - data = (data << 16) + ((c ^ 0x80) << 8); - } else - data = (data << 16) + data; - userCount--; - bal += hSpeed; - } - *p++ = data; - frameLeft--; - bal -= sSpeed; - } - expand_bal = bal; - expand_data = data; - *frameUsed += (ftotal - frameLeft) * 4; - utotal -= userCount; - return stereo? utotal * 2: utotal; -} - - -static ssize_t cs4218_ctx_s16(const u_char *userPtr, size_t userCount, - u_char frame[], ssize_t *frameUsed, - ssize_t frameLeft) -{ - unsigned int *p = (unsigned int *) &frame[*frameUsed]; - unsigned int data = expand_data; - unsigned short *up = (unsigned short *) userPtr; - int bal = expand_bal; - int hSpeed = sound.hard.speed, sSpeed = sound.soft.speed; - int stereo = sound.soft.stereo; - int utotal, ftotal; - - frameLeft >>= 2; - userCount >>= (stereo? 2: 1); - ftotal = frameLeft; - utotal = userCount; - while (frameLeft) { - unsigned short c; - if (bal < 0) { - if (userCount == 0) - break; - if (get_user(data, up++)) - return -EFAULT; - if (stereo) { - if (get_user(c, up++)) - return -EFAULT; - data = (data << 16) + c; - } else - data = (data << 16) + data; - userCount--; - bal += hSpeed; - } - *p++ = data; - frameLeft--; - bal -= sSpeed; - } - expand_bal = bal; - expand_data = data; - *frameUsed += (ftotal - frameLeft) * 4; - utotal -= userCount; - return stereo? utotal * 4: utotal * 2; -} - - -static ssize_t cs4218_ctx_u16(const u_char *userPtr, size_t userCount, - u_char frame[], ssize_t *frameUsed, - ssize_t frameLeft) -{ - int mask = (sound.soft.format == AFMT_U16_LE? 0x0080: 0x8000); - unsigned int *p = (unsigned int *) &frame[*frameUsed]; - unsigned int data = expand_data; - unsigned short *up = (unsigned short *) userPtr; - int bal = expand_bal; - int hSpeed = sound.hard.speed, sSpeed = sound.soft.speed; - int stereo = sound.soft.stereo; - int utotal, ftotal; - - frameLeft >>= 2; - userCount >>= (stereo? 2: 1); - ftotal = frameLeft; - utotal = userCount; - while (frameLeft) { - unsigned short c; - if (bal < 0) { - if (userCount == 0) - break; - if (get_user(data, up++)) - return -EFAULT; - data ^= mask; - if (stereo) { - if (get_user(c, up++)) - return -EFAULT; - data = (data << 16) + (c ^ mask); - } else - data = (data << 16) + data; - userCount--; - bal += hSpeed; - } - *p++ = data; - frameLeft--; - bal -= sSpeed; - } - expand_bal = bal; - expand_data = data; - *frameUsed += (ftotal - frameLeft) * 4; - utotal -= userCount; - return stereo? utotal * 4: utotal * 2; -} - -static ssize_t cs4218_ct_s8_read(const u_char *userPtr, size_t userCount, - u_char frame[], ssize_t *frameUsed, - ssize_t frameLeft) -{ - ssize_t count, used; - short *p = (short *) &frame[*frameUsed]; - int val, stereo = sound.soft.stereo; - - frameLeft >>= 2; - if (stereo) - userCount >>= 1; - used = count = min(userCount, frameLeft); - while (count > 0) { - u_char data; - - val = *p++; - data = val >> 8; - if (put_user(data, (u_char *)userPtr++)) - return -EFAULT; - if (stereo) { - val = *p; - data = val >> 8; - if (put_user(data, (u_char *)userPtr++)) - return -EFAULT; - } - p++; - count--; - } - *frameUsed += used * 4; - return stereo? used * 2: used; -} - - -static ssize_t cs4218_ct_u8_read(const u_char *userPtr, size_t userCount, - u_char frame[], ssize_t *frameUsed, - ssize_t frameLeft) -{ - ssize_t count, used; - short *p = (short *) &frame[*frameUsed]; - int val, stereo = sound.soft.stereo; - - frameLeft >>= 2; - if (stereo) - userCount >>= 1; - used = count = min(userCount, frameLeft); - while (count > 0) { - u_char data; - - val = *p++; - data = (val >> 8) ^ 0x80; - if (put_user(data, (u_char *)userPtr++)) - return -EFAULT; - if (stereo) { - val = *p; - data = (val >> 8) ^ 0x80; - if (put_user(data, (u_char *)userPtr++)) - return -EFAULT; - } - p++; - count--; - } - *frameUsed += used * 4; - return stereo? used * 2: used; -} - - -static ssize_t cs4218_ct_s16_read(const u_char *userPtr, size_t userCount, - u_char frame[], ssize_t *frameUsed, - ssize_t frameLeft) -{ - ssize_t count, used; - int stereo = sound.soft.stereo; - short *fp = (short *) &frame[*frameUsed]; - - frameLeft >>= 2; - userCount >>= (stereo? 2: 1); - used = count = min(userCount, frameLeft); - if (!stereo) { - short *up = (short *) userPtr; - while (count > 0) { - short data; - data = *fp; - if (put_user(data, up++)) - return -EFAULT; - fp+=2; - count--; - } - } else { - if (copy_to_user((u_char *)userPtr, fp, count * 4)) - return -EFAULT; - } - *frameUsed += used * 4; - return stereo? used * 4: used * 2; -} - -static ssize_t cs4218_ct_u16_read(const u_char *userPtr, size_t userCount, - u_char frame[], ssize_t *frameUsed, - ssize_t frameLeft) -{ - ssize_t count, used; - int mask = (sound.soft.format == AFMT_U16_LE? 0x0080: 0x8000); - int stereo = sound.soft.stereo; - short *fp = (short *) &frame[*frameUsed]; - short *up = (short *) userPtr; - - frameLeft >>= 2; - userCount >>= (stereo? 2: 1); - used = count = min(userCount, frameLeft); - while (count > 0) { - int data; - - data = *fp++; - data ^= mask; - if (put_user(data, up++)) - return -EFAULT; - if (stereo) { - data = *fp; - data ^= mask; - if (put_user(data, up++)) - return -EFAULT; - } - fp++; - count--; - } - *frameUsed += used * 4; - return stereo? used * 4: used * 2; -} - -static TRANS transCSNormal = { - cs4218_ct_law, cs4218_ct_law, cs4218_ct_s8, cs4218_ct_u8, - cs4218_ct_s16, cs4218_ct_u16, cs4218_ct_s16, cs4218_ct_u16 -}; - -static TRANS transCSExpand = { - cs4218_ctx_law, cs4218_ctx_law, cs4218_ctx_s8, cs4218_ctx_u8, - cs4218_ctx_s16, cs4218_ctx_u16, cs4218_ctx_s16, cs4218_ctx_u16 -}; - -static TRANS transCSNormalRead = { - NULL, NULL, cs4218_ct_s8_read, cs4218_ct_u8_read, - cs4218_ct_s16_read, cs4218_ct_u16_read, - cs4218_ct_s16_read, cs4218_ct_u16_read -}; - -/*** Low level stuff *********************************************************/ - -static void *CS_Alloc(unsigned int size, gfp_t flags) -{ - int order; - - size >>= 13; - for (order=0; order < 5; order++) { - if (size == 0) - break; - size >>= 1; - } - return (void *)__get_free_pages(flags, order); -} - -static void CS_Free(void *ptr, unsigned int size) -{ - int order; - - size >>= 13; - for (order=0; order < 5; order++) { - if (size == 0) - break; - size >>= 1; - } - free_pages((ulong)ptr, order); -} - -static int __init CS_IrqInit(void) -{ - cpm_install_handler(CPMVEC_SMC2, cs4218_intr, NULL); - return 1; -} - -#ifdef MODULE -static void CS_IrqCleanup(void) -{ - volatile smc_t *sp; - volatile cpm8xx_t *cp; - - /* First disable transmitter and receiver. - */ - sp = &cpmp->cp_smc[1]; - sp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN); - - /* And now shut down the SMC. - */ - cp = cpmp; /* Get pointer to Communication Processor */ - cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SMC2, - CPM_CR_STOP_TX) | CPM_CR_FLG; - while (cp->cp_cpcr & CPM_CR_FLG); - - /* Release the interrupt handler. - */ - cpm_free_handler(CPMVEC_SMC2); - - kfree(beep_buf); - kd_mksound = orig_mksound; -} -#endif /* MODULE */ - -static void CS_Silence(void) -{ - volatile smc_t *sp; - - /* Disable transmitter. - */ - sp = &cpmp->cp_smc[1]; - sp->smc_smcmr &= ~SMCMR_TEN; -} - -/* Frequencies depend upon external oscillator. There are two - * choices, 12.288 and 11.2896 MHz. The RPCG audio supports both through - * and external control register selection bit. - */ -static int cs4218_freqs[] = { - /* 12.288 11.2896 */ - 48000, 44100, - 32000, 29400, - 24000, 22050, - 19200, 17640, - 16000, 14700, - 12000, 11025, - 9600, 8820, - 8000, 7350 -}; - -static void CS_Init(void) -{ - int i, tolerance; - - switch (sound.soft.format) { - case AFMT_S16_LE: - case AFMT_U16_LE: - sound.hard.format = AFMT_S16_LE; - break; - default: - sound.hard.format = AFMT_S16_BE; - break; - } - sound.hard.stereo = 1; - sound.hard.size = 16; - - /* - * If we have a sample rate which is within catchRadius percent - * of the requested value, we don't have to expand the samples. - * Otherwise choose the next higher rate. - */ - i = (sizeof(cs4218_freqs) / sizeof(int)); - do { - tolerance = catchRadius * cs4218_freqs[--i] / 100; - } while (sound.soft.speed > cs4218_freqs[i] + tolerance && i > 0); - if (sound.soft.speed >= cs4218_freqs[i] - tolerance) - sound.trans_write = &transCSNormal; - else - sound.trans_write = &transCSExpand; - sound.trans_read = &transCSNormalRead; - sound.hard.speed = cs4218_freqs[i]; - cs4218_rate_index = i; - - /* The CS4218 has seven selectable clock dividers for the sample - * clock. The HIOX then provides one of two external rates. - * An even numbered frequency table index uses the high external - * clock rate. - */ - *(uint *)HIOX_CSR4_ADDR &= ~(HIOX_CSR4_AUDCLKHI | HIOX_CSR4_AUDCLKSEL); - if ((i & 1) == 0) - *(uint *)HIOX_CSR4_ADDR |= HIOX_CSR4_AUDCLKHI; - i >>= 1; - *(uint *)HIOX_CSR4_ADDR |= (i & HIOX_CSR4_AUDCLKSEL); - - expand_bal = -sound.soft.speed; -} - -static int CS_SetFormat(int format) -{ - int size; - - switch (format) { - case AFMT_QUERY: - return sound.soft.format; - case AFMT_MU_LAW: - case AFMT_A_LAW: - case AFMT_U8: - case AFMT_S8: - size = 8; - break; - case AFMT_S16_BE: - case AFMT_U16_BE: - case AFMT_S16_LE: - case AFMT_U16_LE: - size = 16; - break; - default: /* :-) */ - printk(KERN_ERR "dmasound: unknown format 0x%x, using AFMT_U8\n", - format); - size = 8; - format = AFMT_U8; - } - - sound.soft.format = format; - sound.soft.size = size; - if (sound.minDev == SND_DEV_DSP) { - sound.dsp.format = format; - sound.dsp.size = size; - } - - CS_Init(); - - return format; -} - -/* Volume is the amount of attenuation we tell the codec to impose - * on the outputs. There are 32 levels, with 0 the "loudest". - */ -#define CS_VOLUME_TO_MASK(x) (31 - ((((x) - 1) * 31) / 99)) -#define CS_MASK_TO_VOLUME(y) (100 - ((y) * 99 / 31)) - -static int cs_get_volume(uint reg) -{ - int volume; - - volume = CS_MASK_TO_VOLUME(CS_LATTEN_GET(reg)); - volume |= CS_MASK_TO_VOLUME(CS_RATTEN_GET(reg)) << 8; - return volume; -} - -static int cs_volume_setter(int volume, int mute) -{ - uint tempctl; - - if (mute && volume == 0) { - tempctl = cs4218_control | CS_MUTE; - } else { - tempctl = cs4218_control & ~CS_MUTE; - tempctl = tempctl & ~(CS_LATTEN | CS_RATTEN); - tempctl |= CS_LATTEN_SET(CS_VOLUME_TO_MASK(volume & 0xff)); - tempctl |= CS_RATTEN_SET(CS_VOLUME_TO_MASK((volume >> 8) & 0xff)); - volume = cs_get_volume(tempctl); - } - if (tempctl != cs4218_control) { - cs4218_ctl_write(tempctl); - } - return volume; -} - - -/* Gain has 16 steps from 0 to 15. These are in 1.5dB increments from - * 0 (no gain) to 22.5 dB. - */ -#define CS_RECLEVEL_TO_GAIN(v) \ - ((v) < 0 ? 0 : (v) > 100 ? 15 : (v) * 3 / 20) -#define CS_GAIN_TO_RECLEVEL(v) (((v) * 20 + 2) / 3) - -static int cs_get_gain(uint reg) -{ - int gain; - - gain = CS_GAIN_TO_RECLEVEL(CS_LGAIN_GET(reg)); - gain |= CS_GAIN_TO_RECLEVEL(CS_RGAIN_GET(reg)) << 8; - return gain; -} - -static int cs_set_gain(int gain) -{ - uint tempctl; - - tempctl = cs4218_control & ~(CS_LGAIN | CS_RGAIN); - tempctl |= CS_LGAIN_SET(CS_RECLEVEL_TO_GAIN(gain & 0xff)); - tempctl |= CS_RGAIN_SET(CS_RECLEVEL_TO_GAIN((gain >> 8) & 0xff)); - gain = cs_get_gain(tempctl); - - if (tempctl != cs4218_control) { - cs4218_ctl_write(tempctl); - } - return gain; -} - -static int CS_SetVolume(int volume) -{ - return cs_volume_setter(volume, CS_MUTE); -} - -static void CS_Play(void) -{ - int i, count; - unsigned long flags; - volatile cbd_t *bdp; - volatile cpm8xx_t *cp; - - /* Protect buffer */ - spin_lock_irqsave(&cs4218_lock, flags); -#if 0 - if (awacs_beep_state) { - /* sound takes precedence over beeps */ - out_le32(&awacs_txdma->control, (RUN|PAUSE|FLUSH|WAKE) << 16); - out_le32(&awacs->control, - (in_le32(&awacs->control) & ~0x1f00) - | (awacs_rate_index << 8)); - out_le32(&awacs->byteswap, sound.hard.format != AFMT_S16_BE); - out_le32(&awacs_txdma->cmdptr, virt_to_bus(&(awacs_tx_cmds[(sq.front+sq.active) % sq.max_count]))); - - beep_playing = 0; - awacs_beep_state = 0; - } -#endif - i = sq.front + sq.active; - if (i >= sq.max_count) - i -= sq.max_count; - while (sq.active < 2 && sq.active < sq.count) { - count = (sq.count == sq.active + 1)?sq.rear_size:sq.block_size; - if (count < sq.block_size && !sq.syncing) - /* last block not yet filled, and we're not syncing. */ - break; - - bdp = &tx_base[i]; - bdp->cbd_datlen = count; - - flush_dcache_range((ulong)sound_buffers[i], - (ulong)(sound_buffers[i] + count)); - - if (++i >= sq.max_count) - i = 0; - - if (sq.active == 0) { - /* The SMC does not load its fifo until the first - * TDM frame pulse, so the transmit data gets shifted - * by one word. To compensate for this, we incorrectly - * transmit the first buffer and shorten it by one - * word. Subsequent buffers are then aligned properly. - */ - bdp->cbd_datlen -= 2; - - /* Start up the SMC Transmitter. - */ - cp = cpmp; - cp->cp_smc[1].smc_smcmr |= SMCMR_TEN; - cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SMC2, - CPM_CR_RESTART_TX) | CPM_CR_FLG; - while (cp->cp_cpcr & CPM_CR_FLG); - } - - /* Buffer is ready now. - */ - bdp->cbd_sc |= BD_SC_READY; - - ++sq.active; - } - spin_unlock_irqrestore(&cs4218_lock, flags); -} - - -static void CS_Record(void) -{ - unsigned long flags; - volatile smc_t *sp; - - if (read_sq.active) - return; - - /* Protect buffer */ - spin_lock_irqsave(&cs4218_lock, flags); - - /* This is all we have to do......Just start it up. - */ - sp = &cpmp->cp_smc[1]; - sp->smc_smcmr |= SMCMR_REN; - - read_sq.active = 1; - - spin_unlock_irqrestore(&cs4218_lock, flags); -} - - -static void -cs4218_tdm_tx_intr(void *devid) -{ - int i = sq.front; - volatile cbd_t *bdp; - - while (sq.active > 0) { - bdp = &tx_base[i]; - if (bdp->cbd_sc & BD_SC_READY) - break; /* this frame is still going */ - --sq.count; - --sq.active; - if (++i >= sq.max_count) - i = 0; - } - if (i != sq.front) - WAKE_UP(sq.action_queue); - sq.front = i; - - CS_Play(); - - if (!sq.active) - WAKE_UP(sq.sync_queue); -} - - -static void -cs4218_tdm_rx_intr(void *devid) -{ - - /* We want to blow 'em off when shutting down. - */ - if (read_sq.active == 0) - return; - - /* Check multiple buffers in case we were held off from - * interrupt processing for a long time. Geeze, I really hope - * this doesn't happen. - */ - while ((rx_base[read_sq.rear].cbd_sc & BD_SC_EMPTY) == 0) { - - /* Invalidate the data cache range for this buffer. - */ - invalidate_dcache_range( - (uint)(sound_read_buffers[read_sq.rear]), - (uint)(sound_read_buffers[read_sq.rear] + read_sq.block_size)); - - /* Make buffer available again and move on. - */ - rx_base[read_sq.rear].cbd_sc |= BD_SC_EMPTY; - read_sq.rear++; - - /* Wrap the buffer ring. - */ - if (read_sq.rear >= read_sq.max_active) - read_sq.rear = 0; - - /* If we have caught up to the front buffer, bump it. - * This will cause weird (but not fatal) results if the - * read loop is currently using this buffer. The user is - * behind in this case anyway, so weird things are going - * to happen. - */ - if (read_sq.rear == read_sq.front) { - read_sq.front++; - if (read_sq.front >= read_sq.max_active) - read_sq.front = 0; - } - } - - WAKE_UP(read_sq.action_queue); -} - -static void cs_nosound(unsigned long xx) -{ - unsigned long flags; - - /* not sure if this is needed, since hardware command is #if 0'd */ - spin_lock_irqsave(&cs4218_lock, flags); - if (beep_playing) { -#if 0 - st_le16(&beep_dbdma_cmd->command, DBDMA_STOP); -#endif - beep_playing = 0; - } - spin_unlock_irqrestore(&cs4218_lock, flags); -} - -static DEFINE_TIMER(beep_timer, cs_nosound, 0, 0); - -static void cs_mksound(unsigned int hz, unsigned int ticks) -{ - unsigned long flags; - int beep_speed = BEEP_SPEED; - int srate = cs4218_freqs[beep_speed]; - int period, ncycles, nsamples; - int i, j, f; - short *p; - static int beep_hz_cache; - static int beep_nsamples_cache; - static int beep_volume_cache; - - if (hz <= srate / BEEP_BUFLEN || hz > srate / 2) { -#if 1 - /* this is a hack for broken X server code */ - hz = 750; - ticks = 12; -#else - /* cancel beep currently playing */ - awacs_nosound(0); - return; -#endif - } - /* lock while modifying beep_timer */ - spin_lock_irqsave(&cs4218_lock, flags); - del_timer(&beep_timer); - if (ticks) { - beep_timer.expires = jiffies + ticks; - add_timer(&beep_timer); - } - if (beep_playing || sq.active || beep_buf == NULL) { - spin_unlock_irqrestore(&cs4218_lock, flags); - return; /* too hard, sorry :-( */ - } - beep_playing = 1; -#if 0 - st_le16(&beep_dbdma_cmd->command, OUTPUT_MORE + BR_ALWAYS); -#endif - spin_unlock_irqrestore(&cs4218_lock, flags); - - if (hz == beep_hz_cache && beep_volume == beep_volume_cache) { - nsamples = beep_nsamples_cache; - } else { - period = srate * 256 / hz; /* fixed point */ - ncycles = BEEP_BUFLEN * 256 / period; - nsamples = (period * ncycles) >> 8; - f = ncycles * 65536 / nsamples; - j = 0; - p = beep_buf; - for (i = 0; i < nsamples; ++i, p += 2) { - p[0] = p[1] = beep_wform[j >> 8] * beep_volume; - j = (j + f) & 0xffff; - } - beep_hz_cache = hz; - beep_volume_cache = beep_volume; - beep_nsamples_cache = nsamples; - } - -#if 0 - st_le16(&beep_dbdma_cmd->req_count, nsamples*4); - st_le16(&beep_dbdma_cmd->xfer_status, 0); - st_le32(&beep_dbdma_cmd->cmd_dep, virt_to_bus(beep_dbdma_cmd)); - st_le32(&beep_dbdma_cmd->phy_addr, virt_to_bus(beep_buf)); - awacs_beep_state = 1; - - spin_lock_irqsave(&cs4218_lock, flags); - if (beep_playing) { /* i.e. haven't been terminated already */ - out_le32(&awacs_txdma->control, (RUN|WAKE|FLUSH|PAUSE) << 16); - out_le32(&awacs->control, - (in_le32(&awacs->control) & ~0x1f00) - | (beep_speed << 8)); - out_le32(&awacs->byteswap, 0); - out_le32(&awacs_txdma->cmdptr, virt_to_bus(beep_dbdma_cmd)); - out_le32(&awacs_txdma->control, RUN | (RUN << 16)); - } - spin_unlock_irqrestore(&cs4218_lock, flags); -#endif -} - -static MACHINE mach_cs4218 = { - .owner = THIS_MODULE, - .name = "HIOX CS4218", - .name2 = "Built-in Sound", - .dma_alloc = CS_Alloc, - .dma_free = CS_Free, - .irqinit = CS_IrqInit, -#ifdef MODULE - .irqcleanup = CS_IrqCleanup, -#endif /* MODULE */ - .init = CS_Init, - .silence = CS_Silence, - .setFormat = CS_SetFormat, - .setVolume = CS_SetVolume, - .play = CS_Play -}; - - -/*** Mid level stuff *********************************************************/ - - -static void sound_silence(void) -{ - /* update hardware settings one more */ - (*sound.mach.init)(); - - (*sound.mach.silence)(); -} - - -static void sound_init(void) -{ - (*sound.mach.init)(); -} - - -static int sound_set_format(int format) -{ - return(*sound.mach.setFormat)(format); -} - - -static int sound_set_speed(int speed) -{ - if (speed < 0) - return(sound.soft.speed); - - sound.soft.speed = speed; - (*sound.mach.init)(); - if (sound.minDev == SND_DEV_DSP) - sound.dsp.speed = sound.soft.speed; - - return(sound.soft.speed); -} - - -static int sound_set_stereo(int stereo) -{ - if (stereo < 0) - return(sound.soft.stereo); - - stereo = !!stereo; /* should be 0 or 1 now */ - - sound.soft.stereo = stereo; - if (sound.minDev == SND_DEV_DSP) - sound.dsp.stereo = stereo; - (*sound.mach.init)(); - - return(stereo); -} - - -static int sound_set_volume(int volume) -{ - return(*sound.mach.setVolume)(volume); -} - -static ssize_t sound_copy_translate(const u_char *userPtr, - size_t userCount, - u_char frame[], ssize_t *frameUsed, - ssize_t frameLeft) -{ - ssize_t (*ct_func)(const u_char *, size_t, u_char *, ssize_t *, ssize_t) = NULL; - - switch (sound.soft.format) { - case AFMT_MU_LAW: - ct_func = sound.trans_write->ct_ulaw; - break; - case AFMT_A_LAW: - ct_func = sound.trans_write->ct_alaw; - break; - case AFMT_S8: - ct_func = sound.trans_write->ct_s8; - break; - case AFMT_U8: - ct_func = sound.trans_write->ct_u8; - break; - case AFMT_S16_BE: - ct_func = sound.trans_write->ct_s16be; - break; - case AFMT_U16_BE: - ct_func = sound.trans_write->ct_u16be; - break; - case AFMT_S16_LE: - ct_func = sound.trans_write->ct_s16le; - break; - case AFMT_U16_LE: - ct_func = sound.trans_write->ct_u16le; - break; - } - if (ct_func) - return ct_func(userPtr, userCount, frame, frameUsed, frameLeft); - else - return 0; -} - -static ssize_t sound_copy_translate_read(const u_char *userPtr, - size_t userCount, - u_char frame[], ssize_t *frameUsed, - ssize_t frameLeft) -{ - ssize_t (*ct_func)(const u_char *, size_t, u_char *, ssize_t *, ssize_t) = NULL; - - switch (sound.soft.format) { - case AFMT_MU_LAW: - ct_func = sound.trans_read->ct_ulaw; - break; - case AFMT_A_LAW: - ct_func = sound.trans_read->ct_alaw; - break; - case AFMT_S8: - ct_func = sound.trans_read->ct_s8; - break; - case AFMT_U8: - ct_func = sound.trans_read->ct_u8; - break; - case AFMT_S16_BE: - ct_func = sound.trans_read->ct_s16be; - break; - case AFMT_U16_BE: - ct_func = sound.trans_read->ct_u16be; - break; - case AFMT_S16_LE: - ct_func = sound.trans_read->ct_s16le; - break; - case AFMT_U16_LE: - ct_func = sound.trans_read->ct_u16le; - break; - } - if (ct_func) - return ct_func(userPtr, userCount, frame, frameUsed, frameLeft); - else - return 0; -} - - -/* - * /dev/mixer abstraction - */ - -static int mixer_open(struct inode *inode, struct file *file) -{ - mixer.busy = 1; - return nonseekable_open(inode, file); -} - - -static int mixer_release(struct inode *inode, struct file *file) -{ - mixer.busy = 0; - return 0; -} - - -static int mixer_ioctl(struct inode *inode, struct file *file, u_int cmd, - u_long arg) -{ - int data; - uint tmpcs; - - if (_SIOC_DIR(cmd) & _SIOC_WRITE) - mixer.modify_counter++; - if (cmd == OSS_GETVERSION) - return IOCTL_OUT(arg, SOUND_VERSION); - switch (cmd) { - case SOUND_MIXER_INFO: { - mixer_info info; - strlcpy(info.id, "CS4218_TDM", sizeof(info.id)); - strlcpy(info.name, "CS4218_TDM", sizeof(info.name)); - info.name[sizeof(info.name)-1] = 0; - info.modify_counter = mixer.modify_counter; - if (copy_to_user((int *)arg, &info, sizeof(info))) - return -EFAULT; - return 0; - } - case SOUND_MIXER_READ_DEVMASK: - data = SOUND_MASK_VOLUME | SOUND_MASK_LINE - | SOUND_MASK_MIC | SOUND_MASK_RECLEV - | SOUND_MASK_ALTPCM; - return IOCTL_OUT(arg, data); - case SOUND_MIXER_READ_RECMASK: - data = SOUND_MASK_LINE | SOUND_MASK_MIC; - return IOCTL_OUT(arg, data); - case SOUND_MIXER_READ_RECSRC: - if (cs4218_control & CS_DO1) - data = SOUND_MASK_LINE; - else - data = SOUND_MASK_MIC; - return IOCTL_OUT(arg, data); - case SOUND_MIXER_WRITE_RECSRC: - IOCTL_IN(arg, data); - data &= (SOUND_MASK_LINE | SOUND_MASK_MIC); - if (data & SOUND_MASK_LINE) - tmpcs = cs4218_control | - (CS_ISL | CS_ISR | CS_DO1); - if (data & SOUND_MASK_MIC) - tmpcs = cs4218_control & - ~(CS_ISL | CS_ISR | CS_DO1); - if (tmpcs != cs4218_control) - cs4218_ctl_write(tmpcs); - return IOCTL_OUT(arg, data); - case SOUND_MIXER_READ_STEREODEVS: - data = SOUND_MASK_VOLUME | SOUND_MASK_RECLEV; - return IOCTL_OUT(arg, data); - case SOUND_MIXER_READ_CAPS: - return IOCTL_OUT(arg, 0); - case SOUND_MIXER_READ_VOLUME: - data = (cs4218_control & CS_MUTE)? 0: - cs_get_volume(cs4218_control); - return IOCTL_OUT(arg, data); - case SOUND_MIXER_WRITE_VOLUME: - IOCTL_IN(arg, data); - return IOCTL_OUT(arg, sound_set_volume(data)); - case SOUND_MIXER_WRITE_ALTPCM: /* really bell volume */ - IOCTL_IN(arg, data); - beep_volume = data & 0xff; - /* fall through */ - case SOUND_MIXER_READ_ALTPCM: - return IOCTL_OUT(arg, beep_volume); - case SOUND_MIXER_WRITE_RECLEV: - IOCTL_IN(arg, data); - data = cs_set_gain(data); - return IOCTL_OUT(arg, data); - case SOUND_MIXER_READ_RECLEV: - data = cs_get_gain(cs4218_control); - return IOCTL_OUT(arg, data); - } - - return -EINVAL; -} - - -static const struct file_operations mixer_fops = -{ - .owner = THIS_MODULE, - .llseek = sound_lseek, - .ioctl = mixer_ioctl, - .open = mixer_open, - .release = mixer_release, -}; - - -static void __init mixer_init(void) -{ - mixer_unit = register_sound_mixer(&mixer_fops, -1); - if (mixer_unit < 0) - return; - - mixer.busy = 0; - sound.treble = 0; - sound.bass = 0; - - /* Set Line input, no gain, no attenuation. - */ - cs4218_control = CS_ISL | CS_ISR | CS_DO1; - cs4218_control |= CS_LGAIN_SET(0) | CS_RGAIN_SET(0); - cs4218_control |= CS_LATTEN_SET(0) | CS_RATTEN_SET(0); - cs4218_ctl_write(cs4218_control); -} - - -/* - * Sound queue stuff, the heart of the driver - */ - - -static int sq_allocate_buffers(void) -{ - int i; - - if (sound_buffers) - return 0; - sound_buffers = kmalloc (numBufs * sizeof(char *), GFP_KERNEL); - if (!sound_buffers) - return -ENOMEM; - for (i = 0; i < numBufs; i++) { - sound_buffers[i] = sound.mach.dma_alloc (bufSize << 10, GFP_KERNEL); - if (!sound_buffers[i]) { - while (i--) - sound.mach.dma_free (sound_buffers[i], bufSize << 10); - kfree (sound_buffers); - sound_buffers = 0; - return -ENOMEM; - } - } - return 0; -} - - -static void sq_release_buffers(void) -{ - int i; - - if (sound_buffers) { - for (i = 0; i < numBufs; i++) - sound.mach.dma_free (sound_buffers[i], bufSize << 10); - kfree (sound_buffers); - sound_buffers = 0; - } -} - - -static int sq_allocate_read_buffers(void) -{ - int i; - - if (sound_read_buffers) - return 0; - sound_read_buffers = kmalloc(numReadBufs * sizeof(char *), GFP_KERNEL); - if (!sound_read_buffers) - return -ENOMEM; - for (i = 0; i < numBufs; i++) { - sound_read_buffers[i] = sound.mach.dma_alloc (readbufSize<<10, - GFP_KERNEL); - if (!sound_read_buffers[i]) { - while (i--) - sound.mach.dma_free (sound_read_buffers[i], - readbufSize << 10); - kfree (sound_read_buffers); - sound_read_buffers = 0; - return -ENOMEM; - } - } - return 0; -} - -static void sq_release_read_buffers(void) -{ - int i; - - if (sound_read_buffers) { - cpmp->cp_smc[1].smc_smcmr &= ~SMCMR_REN; - for (i = 0; i < numReadBufs; i++) - sound.mach.dma_free (sound_read_buffers[i], - bufSize << 10); - kfree (sound_read_buffers); - sound_read_buffers = 0; - } -} - - -static void sq_setup(int numBufs, int bufSize, char **write_buffers) -{ - int i; - volatile cbd_t *bdp; - volatile cpm8xx_t *cp; - volatile smc_t *sp; - - /* Make sure the SMC transmit is shut down. - */ - cp = cpmp; - sp = &cpmp->cp_smc[1]; - sp->smc_smcmr &= ~SMCMR_TEN; - - sq.max_count = numBufs; - sq.max_active = numBufs; - sq.block_size = bufSize; - sq.buffers = write_buffers; - - sq.front = sq.count = 0; - sq.rear = -1; - sq.syncing = 0; - sq.active = 0; - - bdp = tx_base; - for (i=0; i<numBufs; i++) { - bdp->cbd_bufaddr = virt_to_bus(write_buffers[i]); - bdp++; - } - - /* This causes the SMC to sync up with the first buffer again. - */ - cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SMC2, CPM_CR_INIT_TX) | CPM_CR_FLG; - while (cp->cp_cpcr & CPM_CR_FLG); -} - -static void read_sq_setup(int numBufs, int bufSize, char **read_buffers) -{ - int i; - volatile cbd_t *bdp; - volatile cpm8xx_t *cp; - volatile smc_t *sp; - - /* Make sure the SMC receive is shut down. - */ - cp = cpmp; - sp = &cpmp->cp_smc[1]; - sp->smc_smcmr &= ~SMCMR_REN; - - read_sq.max_count = numBufs; - read_sq.max_active = numBufs; - read_sq.block_size = bufSize; - read_sq.buffers = read_buffers; - - read_sq.front = read_sq.count = 0; - read_sq.rear = 0; - read_sq.rear_size = 0; - read_sq.syncing = 0; - read_sq.active = 0; - - bdp = rx_base; - for (i=0; i<numReadBufs; i++) { - bdp->cbd_bufaddr = virt_to_bus(read_buffers[i]); - bdp->cbd_datlen = read_sq.block_size; - bdp++; - } - - /* This causes the SMC to sync up with the first buffer again. - */ - cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SMC2, CPM_CR_INIT_RX) | CPM_CR_FLG; - while (cp->cp_cpcr & CPM_CR_FLG); -} - - -static void sq_play(void) -{ - (*sound.mach.play)(); -} - - -/* ++TeSche: radically changed this one too */ - -static ssize_t sq_write(struct file *file, const char *src, size_t uLeft, - loff_t *ppos) -{ - ssize_t uWritten = 0; - u_char *dest; - ssize_t uUsed, bUsed, bLeft; - - /* ++TeSche: Is something like this necessary? - * Hey, that's an honest question! Or does any other part of the - * filesystem already checks this situation? I really don't know. - */ - if (uLeft == 0) - return 0; - - /* The interrupt doesn't start to play the last, incomplete frame. - * Thus we can append to it without disabling the interrupts! (Note - * also that sq.rear isn't affected by the interrupt.) - */ - - if (sq.count > 0 && (bLeft = sq.block_size-sq.rear_size) > 0) { - dest = sq_block_address(sq.rear); - bUsed = sq.rear_size; - uUsed = sound_copy_translate(src, uLeft, dest, &bUsed, bLeft); - if (uUsed <= 0) - return uUsed; - src += uUsed; - uWritten += uUsed; - uLeft -= uUsed; - sq.rear_size = bUsed; - } - - do { - while (sq.count == sq.max_active) { - sq_play(); - if (NON_BLOCKING(sq.open_mode)) - return uWritten > 0 ? uWritten : -EAGAIN; - SLEEP(sq.action_queue); - if (SIGNAL_RECEIVED) - return uWritten > 0 ? uWritten : -EINTR; - } - - /* Here, we can avoid disabling the interrupt by first - * copying and translating the data, and then updating - * the sq variables. Until this is done, the interrupt - * won't see the new frame and we can work on it - * undisturbed. - */ - - dest = sq_block_address((sq.rear+1) % sq.max_count); - bUsed = 0; - bLeft = sq.block_size; - uUsed = sound_copy_translate(src, uLeft, dest, &bUsed, bLeft); - if (uUsed <= 0) - break; - src += uUsed; - uWritten += uUsed; - uLeft -= uUsed; - if (bUsed) { - sq.rear = (sq.rear+1) % sq.max_count; - sq.rear_size = bUsed; - sq.count++; - } - } while (bUsed); /* uUsed may have been 0 */ - - sq_play(); - - return uUsed < 0? uUsed: uWritten; -} - - -/***********/ - -/* Here is how the values are used for reading. - * The value 'active' simply indicates the DMA is running. This is - * done so the driver semantics are DMA starts when the first read is - * posted. The value 'front' indicates the buffer we should next - * send to the user. The value 'rear' indicates the buffer the DMA is - * currently filling. When 'front' == 'rear' the buffer "ring" is - * empty (we always have an empty available). The 'rear_size' is used - * to track partial offsets into the current buffer. Right now, I just keep - * The DMA running. If the reader can't keep up, the interrupt tosses - * the oldest buffer. We could also shut down the DMA in this case. - */ -static ssize_t sq_read(struct file *file, char *dst, size_t uLeft, - loff_t *ppos) -{ - - ssize_t uRead, bLeft, bUsed, uUsed; - - if (uLeft == 0) - return 0; - - if (!read_sq.active) - CS_Record(); /* Kick off the record process. */ - - uRead = 0; - - /* Move what the user requests, depending upon other options. - */ - while (uLeft > 0) { - - /* When front == rear, the DMA is not done yet. - */ - while (read_sq.front == read_sq.rear) { - if (NON_BLOCKING(read_sq.open_mode)) { - return uRead > 0 ? uRead : -EAGAIN; - } - SLEEP(read_sq.action_queue); - if (SIGNAL_RECEIVED) - return uRead > 0 ? uRead : -EINTR; - } - - /* The amount we move is either what is left in the - * current buffer or what the user wants. - */ - bLeft = read_sq.block_size - read_sq.rear_size; - bUsed = read_sq.rear_size; - uUsed = sound_copy_translate_read(dst, uLeft, - read_sq.buffers[read_sq.front], &bUsed, bLeft); - if (uUsed <= 0) - return uUsed; - dst += uUsed; - uRead += uUsed; - uLeft -= uUsed; - read_sq.rear_size += bUsed; - if (read_sq.rear_size >= read_sq.block_size) { - read_sq.rear_size = 0; - read_sq.front++; - if (read_sq.front >= read_sq.max_active) - read_sq.front = 0; - } - } - return uRead; -} - -static int sq_open(struct inode *inode, struct file *file) -{ - int rc = 0; - - if (file->f_mode & FMODE_WRITE) { - if (sq.busy) { - rc = -EBUSY; - if (NON_BLOCKING(file->f_flags)) - goto err_out; - rc = -EINTR; - while (sq.busy) { - SLEEP(sq.open_queue); - if (SIGNAL_RECEIVED) - goto err_out; - } - } - sq.busy = 1; /* Let's play spot-the-race-condition */ - - if (sq_allocate_buffers()) goto err_out_nobusy; - - sq_setup(numBufs, bufSize<<10,sound_buffers); - sq.open_mode = file->f_mode; - } - - - if (file->f_mode & FMODE_READ) { - if (read_sq.busy) { - rc = -EBUSY; - if (NON_BLOCKING(file->f_flags)) - goto err_out; - rc = -EINTR; - while (read_sq.busy) { - SLEEP(read_sq.open_queue); - if (SIGNAL_RECEIVED) - goto err_out; - } - rc = 0; - } - read_sq.busy = 1; - if (sq_allocate_read_buffers()) goto err_out_nobusy; - - read_sq_setup(numReadBufs,readbufSize<<10, sound_read_buffers); - read_sq.open_mode = file->f_mode; - } - - /* Start up the 4218 by: - * Reset. - * Enable, unreset. - */ - *((volatile uint *)HIOX_CSR4_ADDR) &= ~HIOX_CSR4_RSTAUDIO; - eieio(); - *((volatile uint *)HIOX_CSR4_ADDR) |= HIOX_CSR4_ENAUDIO; - mdelay(50); - *((volatile uint *)HIOX_CSR4_ADDR) |= HIOX_CSR4_RSTAUDIO; - - /* We need to send the current control word in case someone - * opened /dev/mixer and changed things while we were shut - * down. Chances are good the initialization that follows - * would have done this, but it is still possible it wouldn't. - */ - cs4218_ctl_write(cs4218_control); - - sound.minDev = iminor(inode) & 0x0f; - sound.soft = sound.dsp; - sound.hard = sound.dsp; - sound_init(); - if ((iminor(inode) & 0x0f) == SND_DEV_AUDIO) { - sound_set_speed(8000); - sound_set_stereo(0); - sound_set_format(AFMT_MU_LAW); - } - - return nonseekable_open(inode, file); - -err_out_nobusy: - if (file->f_mode & FMODE_WRITE) { - sq.busy = 0; - WAKE_UP(sq.open_queue); - } - if (file->f_mode & FMODE_READ) { - read_sq.busy = 0; - WAKE_UP(read_sq.open_queue); - } -err_out: - return rc; -} - - -static void sq_reset(void) -{ - sound_silence(); - sq.active = 0; - sq.count = 0; - sq.front = (sq.rear+1) % sq.max_count; -#if 0 - init_tdm_buffers(); -#endif -} - - -static int sq_fsync(struct file *filp, struct dentry *dentry) -{ - int rc = 0; - - sq.syncing = 1; - sq_play(); /* there may be an incomplete frame waiting */ - - while (sq.active) { - SLEEP(sq.sync_queue); - if (SIGNAL_RECEIVED) { - /* While waiting for audio output to drain, an - * interrupt occurred. Stop audio output immediately - * and clear the queue. */ - sq_reset(); - rc = -EINTR; - break; - } - } - - sq.syncing = 0; - return rc; -} - -static int sq_release(struct inode *inode, struct file *file) -{ - int rc = 0; - - if (sq.busy) - rc = sq_fsync(file, file->f_path.dentry); - sound.soft = sound.dsp; - sound.hard = sound.dsp; - sound_silence(); - - sq_release_read_buffers(); - sq_release_buffers(); - - if (file->f_mode & FMODE_READ) { - read_sq.busy = 0; - WAKE_UP(read_sq.open_queue); - } - - if (file->f_mode & FMODE_WRITE) { - sq.busy = 0; - WAKE_UP(sq.open_queue); - } - - /* Shut down the SMC. - */ - cpmp->cp_smc[1].smc_smcmr &= ~(SMCMR_TEN | SMCMR_REN); - - /* Shut down the codec. - */ - *((volatile uint *)HIOX_CSR4_ADDR) |= HIOX_CSR4_RSTAUDIO; - eieio(); - *((volatile uint *)HIOX_CSR4_ADDR) &= ~HIOX_CSR4_ENAUDIO; - - /* Wake up a process waiting for the queue being released. - * Note: There may be several processes waiting for a call - * to open() returning. */ - - return rc; -} - - -static int sq_ioctl(struct inode *inode, struct file *file, u_int cmd, - u_long arg) -{ - u_long fmt; - int data; -#if 0 - int size, nbufs; -#else - int size; -#endif - - switch (cmd) { - case SNDCTL_DSP_RESET: - sq_reset(); - return 0; - case SNDCTL_DSP_POST: - case SNDCTL_DSP_SYNC: - return sq_fsync(file, file->f_path.dentry); - - /* ++TeSche: before changing any of these it's - * probably wise to wait until sound playing has - * settled down. */ - case SNDCTL_DSP_SPEED: - sq_fsync(file, file->f_path.dentry); - IOCTL_IN(arg, data); - return IOCTL_OUT(arg, sound_set_speed(data)); - case SNDCTL_DSP_STEREO: - sq_fsync(file, file->f_path.dentry); - IOCTL_IN(arg, data); - return IOCTL_OUT(arg, sound_set_stereo(data)); - case SOUND_PCM_WRITE_CHANNELS: - sq_fsync(file, file->f_path.dentry); - IOCTL_IN(arg, data); - return IOCTL_OUT(arg, sound_set_stereo(data-1)+1); - case SNDCTL_DSP_SETFMT: - sq_fsync(file, file->f_path.dentry); - IOCTL_IN(arg, data); - return IOCTL_OUT(arg, sound_set_format(data)); - case SNDCTL_DSP_GETFMTS: - fmt = 0; - if (sound.trans_write) { - if (sound.trans_write->ct_ulaw) - fmt |= AFMT_MU_LAW; - if (sound.trans_write->ct_alaw) - fmt |= AFMT_A_LAW; - if (sound.trans_write->ct_s8) - fmt |= AFMT_S8; - if (sound.trans_write->ct_u8) - fmt |= AFMT_U8; - if (sound.trans_write->ct_s16be) - fmt |= AFMT_S16_BE; - if (sound.trans_write->ct_u16be) - fmt |= AFMT_U16_BE; - if (sound.trans_write->ct_s16le) - fmt |= AFMT_S16_LE; - if (sound.trans_write->ct_u16le) - fmt |= AFMT_U16_LE; - } - return IOCTL_OUT(arg, fmt); - case SNDCTL_DSP_GETBLKSIZE: - size = sq.block_size - * sound.soft.size * (sound.soft.stereo + 1) - / (sound.hard.size * (sound.hard.stereo + 1)); - return IOCTL_OUT(arg, size); - case SNDCTL_DSP_SUBDIVIDE: - break; -#if 0 /* Sorry can't do this at the moment. The CPM allocated buffers - * long ago that can't be changed. - */ - case SNDCTL_DSP_SETFRAGMENT: - if (sq.count || sq.active || sq.syncing) - return -EINVAL; - IOCTL_IN(arg, size); - nbufs = size >> 16; - if (nbufs < 2 || nbufs > numBufs) - nbufs = numBufs; - size &= 0xffff; - if (size >= 8 && size <= 30) { - size = 1 << size; - size *= sound.hard.size * (sound.hard.stereo + 1); - size /= sound.soft.size * (sound.soft.stereo + 1); - if (size > (bufSize << 10)) - size = bufSize << 10; - } else - size = bufSize << 10; - sq_setup(numBufs, size, sound_buffers); - sq.max_active = nbufs; - return 0; -#endif - - default: - return mixer_ioctl(inode, file, cmd, arg); - } - return -EINVAL; -} - - - -static const struct file_operations sq_fops = -{ - .owner = THIS_MODULE, - .llseek = sound_lseek, - .read = sq_read, /* sq_read */ - .write = sq_write, - .ioctl = sq_ioctl, - .open = sq_open, - .release = sq_release, -}; - - -static void __init sq_init(void) -{ - sq_unit = register_sound_dsp(&sq_fops, -1); - if (sq_unit < 0) - return; - - init_waitqueue_head(&sq.action_queue); - init_waitqueue_head(&sq.open_queue); - init_waitqueue_head(&sq.sync_queue); - init_waitqueue_head(&read_sq.action_queue); - init_waitqueue_head(&read_sq.open_queue); - init_waitqueue_head(&read_sq.sync_queue); - - sq.busy = 0; - read_sq.busy = 0; - - /* whatever you like as startup mode for /dev/dsp, - * (/dev/audio hasn't got a startup mode). note that - * once changed a new open() will *not* restore these! - */ - sound.dsp.format = AFMT_S16_BE; - sound.dsp.stereo = 1; - sound.dsp.size = 16; - - /* set minimum rate possible without expanding */ - sound.dsp.speed = 8000; - - /* before the first open to /dev/dsp this wouldn't be set */ - sound.soft = sound.dsp; - sound.hard = sound.dsp; - - sound_silence(); -} - -/* - * /dev/sndstat - */ - - -/* state.buf should not overflow! */ - -static int state_open(struct inode *inode, struct file *file) -{ - char *buffer = state.buf, *mach = "", cs4218_buf[50]; - int len = 0; - - if (state.busy) - return -EBUSY; - - state.ptr = 0; - state.busy = 1; - - sprintf(cs4218_buf, "Crystal CS4218 on TDM, "); - mach = cs4218_buf; - - len += sprintf(buffer+len, "%sDMA sound driver:\n", mach); - - len += sprintf(buffer+len, "\tsound.format = 0x%x", sound.soft.format); - switch (sound.soft.format) { - case AFMT_MU_LAW: - len += sprintf(buffer+len, " (mu-law)"); - break; - case AFMT_A_LAW: - len += sprintf(buffer+len, " (A-law)"); - break; - case AFMT_U8: - len += sprintf(buffer+len, " (unsigned 8 bit)"); - break; - case AFMT_S8: - len += sprintf(buffer+len, " (signed 8 bit)"); - break; - case AFMT_S16_BE: - len += sprintf(buffer+len, " (signed 16 bit big)"); - break; - case AFMT_U16_BE: - len += sprintf(buffer+len, " (unsigned 16 bit big)"); - break; - case AFMT_S16_LE: - len += sprintf(buffer+len, " (signed 16 bit little)"); - break; - case AFMT_U16_LE: - len += sprintf(buffer+len, " (unsigned 16 bit little)"); - break; - } - len += sprintf(buffer+len, "\n"); - len += sprintf(buffer+len, "\tsound.speed = %dHz (phys. %dHz)\n", - sound.soft.speed, sound.hard.speed); - len += sprintf(buffer+len, "\tsound.stereo = 0x%x (%s)\n", - sound.soft.stereo, sound.soft.stereo ? "stereo" : "mono"); - len += sprintf(buffer+len, "\tsq.block_size = %d sq.max_count = %d" - " sq.max_active = %d\n", - sq.block_size, sq.max_count, sq.max_active); - len += sprintf(buffer+len, "\tsq.count = %d sq.rear_size = %d\n", sq.count, - sq.rear_size); - len += sprintf(buffer+len, "\tsq.active = %d sq.syncing = %d\n", - sq.active, sq.syncing); - state.len = len; - return nonseekable_open(inode, file); -} - - -static int state_release(struct inode *inode, struct file *file) -{ - state.busy = 0; - return 0; -} - - -static ssize_t state_read(struct file *file, char *buf, size_t count, - loff_t *ppos) -{ - int n = state.len - state.ptr; - if (n > count) - n = count; - if (n <= 0) - return 0; - if (copy_to_user(buf, &state.buf[state.ptr], n)) - return -EFAULT; - state.ptr += n; - return n; -} - - -static const struct file_operations state_fops = -{ - .owner = THIS_MODULE, - .llseek = sound_lseek, - .read = state_read, - .open = state_open, - .release = state_release, -}; - - -static void __init state_init(void) -{ - state_unit = register_sound_special(&state_fops, SND_DEV_STATUS); - if (state_unit < 0) - return; - state.busy = 0; -} - - -/*** Common stuff ********************************************************/ - -static long long sound_lseek(struct file *file, long long offset, int orig) -{ - return -ESPIPE; -} - - -/*** Config & Setup **********************************************************/ - - -int __init tdm8xx_sound_init(void) -{ - int i, has_sound; - uint dp_offset; - volatile uint *sirp; - volatile cbd_t *bdp; - volatile cpm8xx_t *cp; - volatile smc_t *sp; - volatile smc_uart_t *up; - volatile immap_t *immap; - - has_sound = 0; - - /* Program the SI/TSA to use TDMa, connected to SMC2, for 4 bytes. - */ - cp = cpmp; /* Get pointer to Communication Processor */ - immap = (immap_t *)IMAP_ADDR; /* and to internal registers */ - - /* Set all TDMa control bits to zero. This enables most features - * we want. - */ - cp->cp_simode &= ~0x00000fff; - - /* Enable common receive/transmit clock pins, use IDL format. - * Sync on falling edge, transmit rising clock, receive falling - * clock, delay 1 bit on both Tx and Rx. Common Tx/Rx clocks and - * sync. - * Connect SMC2 to TSA. - */ - cp->cp_simode |= 0x80000141; - - /* Configure port A pins for TDMa operation. - * The RPX-Lite (MPC850/823) loses SMC2 when TDM is used. - */ - immap->im_ioport.iop_papar |= 0x01c0; /* Enable TDMa functions */ - immap->im_ioport.iop_padir |= 0x00c0; /* Enable TDMa Tx/Rx */ - immap->im_ioport.iop_padir &= ~0x0100; /* Enable L1RCLKa */ - - immap->im_ioport.iop_pcpar |= 0x0800; /* Enable L1RSYNCa */ - immap->im_ioport.iop_pcdir &= ~0x0800; - - /* Initialize the SI TDM routing table. We use TDMa only. - * The receive table and transmit table each have only one - * entry, to capture/send four bytes after each frame pulse. - * The 16-bit ram entry is 0000 0001 1000 1111. (SMC2) - */ - cp->cp_sigmr = 0; - sirp = (uint *)cp->cp_siram; - - *sirp = 0x018f0000; /* Receive entry */ - sirp += 64; - *sirp = 0x018f0000; /* Tramsmit entry */ - - /* Enable single TDMa routing. - */ - cp->cp_sigmr = 0x04; - - /* Initialize the SMC for transparent operation. - */ - sp = &cpmp->cp_smc[1]; - up = (smc_uart_t *)&cp->cp_dparam[PROFF_SMC2]; - - /* We need to allocate a transmit and receive buffer - * descriptors from dual port ram. - */ - dp_addr = cpm_dpalloc(sizeof(cbd_t) * numReadBufs, 8); - - /* Set the physical address of the host memory - * buffers in the buffer descriptors, and the - * virtual address for us to work with. - */ - bdp = (cbd_t *)&cp->cp_dpmem[dp_addr]; - up->smc_rbase = dp_offset; - rx_cur = rx_base = (cbd_t *)bdp; - - for (i=0; i<(numReadBufs-1); i++) { - bdp->cbd_bufaddr = 0; - bdp->cbd_datlen = 0; - bdp->cbd_sc = BD_SC_EMPTY | BD_SC_INTRPT; - bdp++; - } - bdp->cbd_bufaddr = 0; - bdp->cbd_datlen = 0; - bdp->cbd_sc = BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT; - - /* Now, do the same for the transmit buffers. - */ - dp_offset = cpm_dpalloc(sizeof(cbd_t) * numBufs, 8); - - bdp = (cbd_t *)&cp->cp_dpmem[dp_addr]; - up->smc_tbase = dp_offset; - tx_cur = tx_base = (cbd_t *)bdp; - - for (i=0; i<(numBufs-1); i++) { - bdp->cbd_bufaddr = 0; - bdp->cbd_datlen = 0; - bdp->cbd_sc = BD_SC_INTRPT; - bdp++; - } - bdp->cbd_bufaddr = 0; - bdp->cbd_datlen = 0; - bdp->cbd_sc = (BD_SC_WRAP | BD_SC_INTRPT); - - /* Set transparent SMC mode. - * A few things are specific to our application. The codec interface - * is MSB first, hence the REVD selection. The CD/CTS pulse are - * used by the TSA to indicate the frame start to the SMC. - */ - up->smc_rfcr = SCC_EB; - up->smc_tfcr = SCC_EB; - up->smc_mrblr = readbufSize * 1024; - - /* Set 16-bit reversed data, transparent mode. - */ - sp->smc_smcmr = smcr_mk_clen(15) | - SMCMR_SM_TRANS | SMCMR_REVD | SMCMR_BS; - - /* Enable and clear events. - * Because of FIFO delays, all we need is the receive interrupt - * and we can process both the current receive and current - * transmit interrupt within a few microseconds of the transmit. - */ - sp->smc_smce = 0xff; - sp->smc_smcm = SMCM_TXE | SMCM_TX | SMCM_RX; - - /* Send the CPM an initialize command. - */ - cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SMC2, - CPM_CR_INIT_TRX) | CPM_CR_FLG; - while (cp->cp_cpcr & CPM_CR_FLG); - - sound.mach = mach_cs4218; - has_sound = 1; - - /* Initialize beep stuff */ - orig_mksound = kd_mksound; - kd_mksound = cs_mksound; - beep_buf = kmalloc(BEEP_BUFLEN * 4, GFP_KERNEL); - if (beep_buf == NULL) - printk(KERN_WARNING "dmasound: no memory for " - "beep buffer\n"); - - if (!has_sound) - return -ENODEV; - - /* Initialize the software SPI. - */ - sw_spi_init(); - - /* Set up sound queue, /dev/audio and /dev/dsp. */ - - /* Set default settings. */ - sq_init(); - - /* Set up /dev/sndstat. */ - state_init(); - - /* Set up /dev/mixer. */ - mixer_init(); - - if (!sound.mach.irqinit()) { - printk(KERN_ERR "DMA sound driver: Interrupt initialization failed\n"); - return -ENODEV; - } -#ifdef MODULE - irq_installed = 1; -#endif - - printk(KERN_INFO "DMA sound driver installed, using %d buffers of %dk.\n", - numBufs, bufSize); - - return 0; -} - -/* Due to FIFOs and bit delays, the transmit interrupt occurs a few - * microseconds ahead of the receive interrupt. - * When we get an interrupt, we service the transmit first, then - * check for a receive to prevent the overhead of returning through - * the interrupt handler only to get back here right away during - * full duplex operation. - */ -static void -cs4218_intr(void *dev_id) -{ - volatile smc_t *sp; - volatile cpm8xx_t *cp; - - sp = &cpmp->cp_smc[1]; - - if (sp->smc_smce & SCCM_TX) { - sp->smc_smce = SCCM_TX; - cs4218_tdm_tx_intr((void *)sp); - } - - if (sp->smc_smce & SCCM_RX) { - sp->smc_smce = SCCM_RX; - cs4218_tdm_rx_intr((void *)sp); - } - - if (sp->smc_smce & SCCM_TXE) { - /* Transmit underrun. This happens with the application - * didn't keep up sending buffers. We tell the SMC to - * restart, which will cause it to poll the current (next) - * BD. If the user supplied data since this occurred, - * we just start running again. If they didn't, the SMC - * will poll the descriptor until data is placed there. - */ - sp->smc_smce = SCCM_TXE; - cp = cpmp; /* Get pointer to Communication Processor */ - cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SMC2, - CPM_CR_RESTART_TX) | CPM_CR_FLG; - while (cp->cp_cpcr & CPM_CR_FLG); - } -} - - -#define MAXARGS 8 /* Should be sufficient for now */ - -void __init dmasound_setup(char *str, int *ints) -{ - /* check the bootstrap parameter for "dmasound=" */ - - switch (ints[0]) { - case 3: - if ((ints[3] < 0) || (ints[3] > MAX_CATCH_RADIUS)) - printk("dmasound_setup: invalid catch radius, using default = %d\n", catchRadius); - else - catchRadius = ints[3]; - /* fall through */ - case 2: - if (ints[1] < MIN_BUFFERS) - printk("dmasound_setup: invalid number of buffers, using default = %d\n", numBufs); - else - numBufs = ints[1]; - if (ints[2] < MIN_BUFSIZE || ints[2] > MAX_BUFSIZE) - printk("dmasound_setup: invalid buffer size, using default = %d\n", bufSize); - else - bufSize = ints[2]; - break; - case 0: - break; - default: - printk("dmasound_setup: invalid number of arguments\n"); - } -} - -/* Software SPI functions. - * These are on Port B. - */ -#define PB_SPICLK ((uint)0x00000002) -#define PB_SPIMOSI ((uint)0x00000004) -#define PB_SPIMISO ((uint)0x00000008) - -static -void sw_spi_init(void) -{ - volatile cpm8xx_t *cp; - volatile uint *hcsr4; - - hcsr4 = (volatile uint *)HIOX_CSR4_ADDR; - cp = cpmp; /* Get pointer to Communication Processor */ - - *hcsr4 &= ~HIOX_CSR4_AUDSPISEL; /* Disable SPI select */ - - /* Make these Port B signals general purpose I/O. - * First, make sure the clock is low. - */ - cp->cp_pbdat &= ~PB_SPICLK; - cp->cp_pbpar &= ~(PB_SPICLK | PB_SPIMOSI | PB_SPIMISO); - - /* Clock and Master Output are outputs. - */ - cp->cp_pbdir |= (PB_SPICLK | PB_SPIMOSI); - - /* Master Input. - */ - cp->cp_pbdir &= ~PB_SPIMISO; - -} - -/* Write the CS4218 control word out the SPI port. While the - * the control word is going out, the status word is arriving. - */ -static -uint cs4218_ctl_write(uint ctlreg) -{ - uint status; - - sw_spi_io((u_char *)&ctlreg, (u_char *)&status, 4); - - /* Shadow the control register.....I guess we could do - * the same for the status, but for now we just return it - * and let the caller decide. - */ - cs4218_control = ctlreg; - return status; -} - -static -void sw_spi_io(u_char *obuf, u_char *ibuf, uint bcnt) -{ - int bits, i; - u_char outbyte, inbyte; - volatile cpm8xx_t *cp; - volatile uint *hcsr4; - - hcsr4 = (volatile uint *)HIOX_CSR4_ADDR; - cp = cpmp; /* Get pointer to Communication Processor */ - - /* The timing on the bus is pretty slow. Code inefficiency - * and eieio() is our friend here :-). - */ - cp->cp_pbdat &= ~PB_SPICLK; - *hcsr4 |= HIOX_CSR4_AUDSPISEL; /* Enable SPI select */ - eieio(); - - /* Clock in/out the bytes. Data is valid on the falling edge - * of the clock. Data is MSB first. - */ - for (i=0; i<bcnt; i++) { - outbyte = *obuf++; - inbyte = 0; - for (bits=0; bits<8; bits++) { - eieio(); - cp->cp_pbdat |= PB_SPICLK; - eieio(); - if (outbyte & 0x80) - cp->cp_pbdat |= PB_SPIMOSI; - else - cp->cp_pbdat &= ~PB_SPIMOSI; - eieio(); - cp->cp_pbdat &= ~PB_SPICLK; - eieio(); - outbyte <<= 1; - inbyte <<= 1; - if (cp->cp_pbdat & PB_SPIMISO) - inbyte |= 1; - } - *ibuf++ = inbyte; - } - - *hcsr4 &= ~HIOX_CSR4_AUDSPISEL; /* Disable SPI select */ - eieio(); -} - -void cleanup_module(void) -{ - if (irq_installed) { - sound_silence(); -#ifdef MODULE - sound.mach.irqcleanup(); -#endif - } - - sq_release_read_buffers(); - sq_release_buffers(); - - if (mixer_unit >= 0) - unregister_sound_mixer(mixer_unit); - if (state_unit >= 0) - unregister_sound_special(state_unit); - if (sq_unit >= 0) - unregister_sound_dsp(sq_unit); -} - -module_init(tdm8xx_sound_init); -module_exit(cleanup_module); - diff --git a/arch/ppc/boot/common/misc-common.c b/arch/ppc/boot/common/misc-common.c index 8e1fccd96fc0..9589969cec72 100644 --- a/arch/ppc/boot/common/misc-common.c +++ b/arch/ppc/boot/common/misc-common.c @@ -57,7 +57,8 @@ unsigned char *ISA_io = NULL; #if defined(CONFIG_SERIAL_CPM_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE) \ || defined(CONFIG_SERIAL_MPC52xx_CONSOLE) \ - || defined(CONFIG_SERIAL_MPSC_CONSOLE) + || defined(CONFIG_SERIAL_MPSC_CONSOLE) \ + || defined(CONFIG_SERIAL_UARTLITE_CONSOLE) extern unsigned long com_port; extern int serial_tstc(unsigned long com_port); @@ -80,7 +81,8 @@ int tstc(void) { #if defined(CONFIG_SERIAL_CPM_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE) \ || defined(CONFIG_SERIAL_MPC52xx_CONSOLE) \ - || defined(CONFIG_SERIAL_MPSC_CONSOLE) + || defined(CONFIG_SERIAL_MPSC_CONSOLE) \ + || defined(CONFIG_SERIAL_UARTLITE_CONSOLE) if(keyb_present) return (CRT_tstc() || serial_tstc(com_port)); else @@ -95,7 +97,8 @@ int getc(void) while (1) { #if defined(CONFIG_SERIAL_CPM_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE) \ || defined(CONFIG_SERIAL_MPC52xx_CONSOLE) \ - || defined(CONFIG_SERIAL_MPSC_CONSOLE) + || defined(CONFIG_SERIAL_MPSC_CONSOLE) \ + || defined(CONFIG_SERIAL_UARTLITE_CONSOLE) if (serial_tstc(com_port)) return (serial_getc(com_port)); #endif /* serial console */ @@ -112,7 +115,8 @@ putc(const char c) #if defined(CONFIG_SERIAL_CPM_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE) \ || defined(CONFIG_SERIAL_MPC52xx_CONSOLE) \ - || defined(CONFIG_SERIAL_MPSC_CONSOLE) + || defined(CONFIG_SERIAL_MPSC_CONSOLE) \ + || defined(CONFIG_SERIAL_UARTLITE_CONSOLE) serial_putc(com_port, c); if ( c == '\n' ) serial_putc(com_port, '\r'); @@ -161,7 +165,8 @@ void puts(const char *s) while ( ( c = *s++ ) != '\0' ) { #if defined(CONFIG_SERIAL_CPM_CONSOLE) || defined(CONFIG_SERIAL_8250_CONSOLE) \ || defined(CONFIG_SERIAL_MPC52xx_CONSOLE) \ - || defined(CONFIG_SERIAL_MPSC_CONSOLE) + || defined(CONFIG_SERIAL_MPSC_CONSOLE) \ + || defined(CONFIG_SERIAL_UARTLITE_CONSOLE) serial_putc(com_port, c); if ( c == '\n' ) serial_putc(com_port, '\r'); #endif /* serial console */ diff --git a/arch/ppc/boot/simple/Makefile b/arch/ppc/boot/simple/Makefile index bcfb6cde70c4..5b877792d14f 100644 --- a/arch/ppc/boot/simple/Makefile +++ b/arch/ppc/boot/simple/Makefile @@ -201,6 +201,7 @@ boot-$(CONFIG_8260) += m8260_tty.o endif boot-$(CONFIG_SERIAL_MPC52xx_CONSOLE) += mpc52xx_tty.o boot-$(CONFIG_SERIAL_MPSC_CONSOLE) += mv64x60_tty.o +boot-$(CONFIG_SERIAL_UARTLITE_CONSOLE) += uartlite_tty.o LIBS := $(common)/lib.a $(bootlib)/lib.a ifeq ($(CONFIG_PPC_PREP),y) diff --git a/arch/ppc/boot/simple/uartlite_tty.c b/arch/ppc/boot/simple/uartlite_tty.c new file mode 100644 index 000000000000..0eae1eab38d4 --- /dev/null +++ b/arch/ppc/boot/simple/uartlite_tty.c @@ -0,0 +1,37 @@ +/* + * Xilinx UARTLITE bootloader driver + * + * Copyright (c) 2007 Secret Lab Technologies Ltd. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/types.h> +#include <asm/serial.h> +#include <asm/io.h> +#include <platforms/4xx/xparameters/xparameters.h> + +#define UARTLITE_BASEADDR ((void*)(XPAR_UARTLITE_0_BASEADDR)) + +void +serial_putc(unsigned long com_port, unsigned char c) +{ + while ((in_be32(UARTLITE_BASEADDR + 0x8) & 0x08) != 0); /* spin */ + out_be32(UARTLITE_BASEADDR + 0x4, c); +} + +unsigned char +serial_getc(unsigned long com_port) +{ + while ((in_be32(UARTLITE_BASEADDR + 0x8) & 0x01) == 0); /* spin */ + return in_be32(UARTLITE_BASEADDR); +} + +int +serial_tstc(unsigned long com_port) +{ + return ((in_be32(UARTLITE_BASEADDR + 0x8) & 0x01) != 0); +} diff --git a/arch/ppc/kernel/asm-offsets.c b/arch/ppc/kernel/asm-offsets.c index 1f91eca2f3d7..c5850a272650 100644 --- a/arch/ppc/kernel/asm-offsets.c +++ b/arch/ppc/kernel/asm-offsets.c @@ -40,7 +40,6 @@ main(void) DEFINE(PTRACE, offsetof(struct task_struct, ptrace)); DEFINE(KSP, offsetof(struct thread_struct, ksp)); DEFINE(PGDIR, offsetof(struct thread_struct, pgdir)); - DEFINE(LAST_SYSCALL, offsetof(struct thread_struct, last_syscall)); DEFINE(PT_REGS, offsetof(struct thread_struct, regs)); DEFINE(THREAD_FPEXC_MODE, offsetof(struct thread_struct, fpexc_mode)); DEFINE(THREAD_FPR0, offsetof(struct thread_struct, fpr[0])); diff --git a/arch/ppc/kernel/entry.S b/arch/ppc/kernel/entry.S index a9d455369dc6..ab64256110bd 100644 --- a/arch/ppc/kernel/entry.S +++ b/arch/ppc/kernel/entry.S @@ -191,7 +191,6 @@ stack_ovf: 0: _GLOBAL(DoSyscall) - stw r0,THREAD+LAST_SYSCALL(r2) stw r3,ORIG_GPR3(r1) li r12,0 stw r12,RESULT(r1) diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig index 705ae56016f0..76551b679030 100644 --- a/arch/ppc/platforms/4xx/Kconfig +++ b/arch/ppc/platforms/4xx/Kconfig @@ -29,6 +29,7 @@ config CPCI405 config EP405 bool "EP405/EP405PC" + select EMBEDDEDBOOT help This option enables support for the EP405/EP405PC boards. @@ -54,11 +55,15 @@ config WALNUT config XILINX_ML300 bool "Xilinx-ML300" + select XILINX_VIRTEX_II_PRO + select EMBEDDEDBOOT help This option enables support for the Xilinx ML300 evaluation board. config XILINX_ML403 bool "Xilinx-ML403" + select XILINX_VIRTEX_4_FX + select EMBEDDEDBOOT help This option enables support for the Xilinx ML403 evaluation board. endchoice @@ -215,18 +220,14 @@ config 405GPR config XILINX_VIRTEX_II_PRO bool - depends on XILINX_ML300 - default y + select XILINX_VIRTEX config XILINX_VIRTEX_4_FX bool - depends on XILINX_ML403 - default y + select XILINX_VIRTEX config XILINX_VIRTEX bool - depends on XILINX_VIRTEX_II_PRO || XILINX_VIRTEX_4_FX - default y config STB03xxx bool @@ -235,8 +236,6 @@ config STB03xxx config EMBEDDEDBOOT bool - depends on EP405 || XILINX_ML300 || XILINX_ML403 - default y config IBM_OPENBIOS bool diff --git a/arch/ppc/platforms/4xx/Makefile b/arch/ppc/platforms/4xx/Makefile index fa6610bccaf9..723ad7985cc6 100644 --- a/arch/ppc/platforms/4xx/Makefile +++ b/arch/ppc/platforms/4xx/Makefile @@ -28,5 +28,4 @@ obj-$(CONFIG_440SP) += ibm440sp.o obj-$(CONFIG_440SPE) += ppc440spe.o obj-$(CONFIG_405EP) += ibm405ep.o obj-$(CONFIG_405GPR) += ibm405gpr.o -obj-$(CONFIG_XILINX_VIRTEX) += virtex.o diff --git a/arch/ppc/platforms/4xx/ocotea.c b/arch/ppc/platforms/4xx/ocotea.c index 84e999d9a7bb..5e994e146ba8 100644 --- a/arch/ppc/platforms/4xx/ocotea.c +++ b/arch/ppc/platforms/4xx/ocotea.c @@ -178,7 +178,7 @@ ocotea_setup_pcix(void) /* Setup 2GB PCI->PLB inbound memory window at 0, enable MSIs */ PCIX_WRITEL(0x00000000, PCIX0_PIM0LAH); PCIX_WRITEL(0x00000000, PCIX0_PIM0LAL); - PCIX_WRITEL(0xe0000007, PCIX0_PIM0SA); + PCIX_WRITEL(0x80000007, PCIX0_PIM0SA); eieio(); } @@ -289,7 +289,7 @@ ocotea_setup_arch(void) * from FPGA, because it can be changed by on-board switches * --ebs */ - ibm440gx_get_clocks(&clocks, 33333333, 6 * 1843200); + ibm440gx_get_clocks(&clocks, 33300000, 6 * 1843200); ocp_sys_info.opb_bus_freq = clocks.opb; /* Setup TODC access */ diff --git a/arch/ppc/platforms/4xx/taishan.c b/arch/ppc/platforms/4xx/taishan.c index bb0253eef45a..5d9af8ddb155 100644 --- a/arch/ppc/platforms/4xx/taishan.c +++ b/arch/ppc/platforms/4xx/taishan.c @@ -235,7 +235,7 @@ taishan_setup_pcix(void) /* Setup 2GB PCI->PLB inbound memory window at 0, enable MSIs */ PCIX_WRITEL(0x00000000, PCIX0_PIM0LAH); PCIX_WRITEL(0x00000000, PCIX0_PIM0LAL); - PCIX_WRITEL(0xe0000007, PCIX0_PIM0SA); + PCIX_WRITEL(0x80000007, PCIX0_PIM0SA); PCIX_WRITEL(0xffffffff, PCIX0_PIM0SAH); iounmap(pcix_reg_base); diff --git a/arch/ppc/platforms/4xx/virtex.c b/arch/ppc/platforms/4xx/virtex.c deleted file mode 100644 index 133a83147199..000000000000 --- a/arch/ppc/platforms/4xx/virtex.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * Virtex-II Pro & Virtex-4 FX common infrastructure - * - * Maintainer: Grant Likely <grant.likely@secretlab.ca> - * - * Copyright 2005 Secret Lab Technologies Ltd. - * Copyright 2005 General Dynamics Canada Ltd. - * Copyright 2005 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/device.h> -#include <linux/serial_8250.h> -#include <asm/ppc_sys.h> -#include <platforms/4xx/virtex.h> -#include <platforms/4xx/xparameters/xparameters.h> - -#define XPAR_UART(num) { \ - .mapbase = XPAR_UARTNS550_##num##_BASEADDR + 3, \ - .irq = XPAR_INTC_0_UARTNS550_##num##_VEC_ID, \ - .iotype = UPIO_MEM, \ - .uartclk = XPAR_UARTNS550_##num##_CLOCK_FREQ_HZ, \ - .flags = UPF_BOOT_AUTOCONF, \ - .regshift = 2, \ - } - -struct plat_serial8250_port serial_platform_data[] = { -#ifdef XPAR_UARTNS550_0_BASEADDR - XPAR_UART(0), -#endif -#ifdef XPAR_UARTNS550_1_BASEADDR - XPAR_UART(1), -#endif -#ifdef XPAR_UARTNS550_2_BASEADDR - XPAR_UART(2), -#endif -#ifdef XPAR_UARTNS550_3_BASEADDR - XPAR_UART(3), -#endif - { }, /* terminated by empty record */ -}; - -struct platform_device ppc_sys_platform_devices[] = { - [VIRTEX_UART] = { - .name = "serial8250", - .id = 0, - .dev.platform_data = serial_platform_data, - }, -}; - diff --git a/arch/ppc/platforms/4xx/virtex.h b/arch/ppc/platforms/4xx/virtex.h index c14325dfd7b1..738280420be5 100644 --- a/arch/ppc/platforms/4xx/virtex.h +++ b/arch/ppc/platforms/4xx/virtex.h @@ -1,35 +1,35 @@ /* - * arch/ppc/platforms/4xx/virtex.h + * Basic Virtex platform defines, included by <asm/ibm4xx.h> * - * Include file that defines the Xilinx Virtex-II Pro processor + * 2005-2007 (c) Secret Lab Technologies Ltd. + * 2002-2004 (c) MontaVista Software, Inc. * - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * 2002-2004 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is licensed - * "as is" without any warranty of any kind, whether express or implied. + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. */ #ifdef __KERNEL__ #ifndef __ASM_VIRTEX_H__ #define __ASM_VIRTEX_H__ -/* serial defines */ - #include <asm/ibm405.h> +#include <asm/ppcboot.h> /* Ugly, ugly, ugly! BASE_BAUD defined here to keep 8250.c happy. */ #if !defined(BASE_BAUD) #define BASE_BAUD (0) /* dummy value; not used */ #endif - -/* Device type enumeration for platform bus definitions */ + #ifndef __ASSEMBLY__ -enum ppc_sys_devices { - VIRTEX_UART, NUM_PPC_SYS_DEVS, -}; -#endif - +extern const char* virtex_machine_name; +#define PPC4xx_MACHINE_NAME (virtex_machine_name) +#endif /* !__ASSEMBLY__ */ + +/* We don't need anything mapped. Size of zero will accomplish that. */ +#define PPC4xx_ONB_IO_PADDR 0u +#define PPC4xx_ONB_IO_VADDR 0u +#define PPC4xx_ONB_IO_SIZE 0u + #endif /* __ASM_VIRTEX_H__ */ #endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/4xx/xilinx_ml300.c b/arch/ppc/platforms/4xx/xilinx_ml300.c index fb5f0b5e13d1..6e522fefc26f 100644 --- a/arch/ppc/platforms/4xx/xilinx_ml300.c +++ b/arch/ppc/platforms/4xx/xilinx_ml300.c @@ -18,9 +18,9 @@ #include <linux/serialP.h> #include <asm/io.h> #include <asm/machdep.h> -#include <asm/ppc_sys.h> #include <syslib/gen550.h> +#include <syslib/virtex_devices.h> #include <platforms/4xx/xparameters/xparameters.h> /* @@ -53,24 +53,9 @@ * ppc4xx_pic_init arch/ppc/syslib/xilinx_pic.c */ -/* Board specifications structures */ -struct ppc_sys_spec *cur_ppc_sys_spec; -struct ppc_sys_spec ppc_sys_specs[] = { - { - /* Only one entry, always assume the same design */ - .ppc_sys_name = "Xilinx ML300 Reference Design", - .mask = 0x00000000, - .value = 0x00000000, - .num_devices = 1, - .device_list = (enum ppc_sys_devices[]) - { - VIRTEX_UART, - }, - }, -}; +const char* virtex_machine_name = "ML300 Reference Design"; #if defined(XPAR_POWER_0_POWERDOWN_BASEADDR) - static volatile unsigned *powerdown_base = (volatile unsigned *) XPAR_POWER_0_POWERDOWN_BASEADDR; @@ -95,52 +80,14 @@ ml300_map_io(void) #endif } -/* Early serial support functions */ -static void __init -ml300_early_serial_init(int num, struct plat_serial8250_port *pdata) -{ -#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) - struct uart_port serial_req; - - memset(&serial_req, 0, sizeof(serial_req)); - serial_req.mapbase = pdata->mapbase; - serial_req.membase = pdata->membase; - serial_req.irq = pdata->irq; - serial_req.uartclk = pdata->uartclk; - serial_req.regshift = pdata->regshift; - serial_req.iotype = pdata->iotype; - serial_req.flags = pdata->flags; - gen550_init(num, &serial_req); -#endif -} - -void __init -ml300_early_serial_map(void) -{ -#ifdef CONFIG_SERIAL_8250 - struct plat_serial8250_port *pdata; - int i = 0; - - pdata = (struct plat_serial8250_port *) ppc_sys_get_pdata(VIRTEX_UART); - while(pdata && pdata->flags) - { - pdata->membase = ioremap(pdata->mapbase, 0x100); - ml300_early_serial_init(i, pdata); - pdata++; - i++; - } -#endif /* CONFIG_SERIAL_8250 */ -} - void __init ml300_setup_arch(void) { - ml300_early_serial_map(); + virtex_early_serial_map(); ppc4xx_setup_arch(); /* calls ppc4xx_find_bridges() */ /* Identify the system */ - printk(KERN_INFO "Xilinx Virtex-II Pro port\n"); - printk(KERN_INFO "Port by MontaVista Software, Inc. (source@mvista.com)\n"); + printk(KERN_INFO "Xilinx ML300 Reference System (Virtex-II Pro)\n"); } /* Called after board_setup_irq from ppc4xx_init_IRQ(). */ @@ -156,8 +103,6 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, { ppc4xx_init(r3, r4, r5, r6, r7); - identify_ppc_sys_by_id(mfspr(SPRN_PVR)); - ppc_md.setup_arch = ml300_setup_arch; ppc_md.setup_io_mappings = ml300_map_io; ppc_md.init_IRQ = ml300_init_irq; @@ -167,7 +112,7 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, #endif #ifdef CONFIG_KGDB - ppc_md.early_serial_map = ml300_early_serial_map; + ppc_md.early_serial_map = virtex_early_serial_map; #endif } diff --git a/arch/ppc/platforms/4xx/xilinx_ml300.h b/arch/ppc/platforms/4xx/xilinx_ml300.h deleted file mode 100644 index 3d57332ba820..000000000000 --- a/arch/ppc/platforms/4xx/xilinx_ml300.h +++ /dev/null @@ -1,45 +0,0 @@ -/* - * Include file that defines the Xilinx ML300 evaluation board - * - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * 2002-2004 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is licensed - * "as is" without any warranty of any kind, whether express or implied. - */ - -#ifdef __KERNEL__ -#ifndef __ASM_XILINX_ML300_H__ -#define __ASM_XILINX_ML300_H__ - -/* ML300 has a Xilinx Virtex-II Pro processor */ -#include <platforms/4xx/virtex.h> - -#ifndef __ASSEMBLY__ - -#include <linux/types.h> - -typedef struct board_info { - unsigned int bi_memsize; /* DRAM installed, in bytes */ - unsigned char bi_enetaddr[6]; /* Local Ethernet MAC address */ - unsigned int bi_intfreq; /* Processor speed, in Hz */ - unsigned int bi_busfreq; /* PLB Bus speed, in Hz */ - unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */ -} bd_t; - -/* Some 4xx parts use a different timebase frequency from the internal clock. -*/ -#define bi_tbfreq bi_intfreq - -#endif /* !__ASSEMBLY__ */ - -/* We don't need anything mapped. Size of zero will accomplish that. */ -#define PPC4xx_ONB_IO_PADDR 0u -#define PPC4xx_ONB_IO_VADDR 0u -#define PPC4xx_ONB_IO_SIZE 0u - -#define PPC4xx_MACHINE_NAME "Xilinx ML300 Reference System" - -#endif /* __ASM_XILINX_ML300_H__ */ -#endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/4xx/xilinx_ml403.c b/arch/ppc/platforms/4xx/xilinx_ml403.c index cb3bf7a2bcbe..bc3ace3762e7 100644 --- a/arch/ppc/platforms/4xx/xilinx_ml403.c +++ b/arch/ppc/platforms/4xx/xilinx_ml403.c @@ -1,11 +1,9 @@ /* - * arch/ppc/platforms/4xx/xilinx_ml403.c - * * Xilinx ML403 evaluation board initialization * * Author: Grant Likely <grant.likely@secretlab.ca> * - * 2005 (c) Secret Lab Technologies Ltd. + * 2005-2007 (c) Secret Lab Technologies Ltd. * 2002-2004 (c) MontaVista Software, Inc. * * This file is licensed under the terms of the GNU General Public License @@ -22,9 +20,9 @@ #include <linux/serialP.h> #include <asm/io.h> #include <asm/machdep.h> -#include <asm/ppc_sys.h> #include <syslib/gen550.h> +#include <syslib/virtex_devices.h> #include <platforms/4xx/xparameters/xparameters.h> /* @@ -57,24 +55,9 @@ * ppc4xx_pic_init arch/ppc/syslib/xilinx_pic.c */ -/* Board specifications structures */ -struct ppc_sys_spec *cur_ppc_sys_spec; -struct ppc_sys_spec ppc_sys_specs[] = { - { - /* Only one entry, always assume the same design */ - .ppc_sys_name = "Xilinx ML403 Reference Design", - .mask = 0x00000000, - .value = 0x00000000, - .num_devices = 1, - .device_list = (enum ppc_sys_devices[]) - { - VIRTEX_UART, - }, - }, -}; +const char* virtex_machine_name = "ML403 Reference Design"; #if defined(XPAR_POWER_0_POWERDOWN_BASEADDR) - static volatile unsigned *powerdown_base = (volatile unsigned *) XPAR_POWER_0_POWERDOWN_BASEADDR; @@ -99,47 +82,10 @@ ml403_map_io(void) #endif } -/* Early serial support functions */ -static void __init -ml403_early_serial_init(int num, struct plat_serial8250_port *pdata) -{ -#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) - struct uart_port serial_req; - - memset(&serial_req, 0, sizeof(serial_req)); - serial_req.mapbase = pdata->mapbase; - serial_req.membase = pdata->membase; - serial_req.irq = pdata->irq; - serial_req.uartclk = pdata->uartclk; - serial_req.regshift = pdata->regshift; - serial_req.iotype = pdata->iotype; - serial_req.flags = pdata->flags; - gen550_init(num, &serial_req); -#endif -} - -void __init -ml403_early_serial_map(void) -{ -#ifdef CONFIG_SERIAL_8250 - struct plat_serial8250_port *pdata; - int i = 0; - - pdata = (struct plat_serial8250_port *) ppc_sys_get_pdata(VIRTEX_UART); - while(pdata && pdata->flags) - { - pdata->membase = ioremap(pdata->mapbase, 0x100); - ml403_early_serial_init(i, pdata); - pdata++; - i++; - } -#endif /* CONFIG_SERIAL_8250 */ -} - void __init ml403_setup_arch(void) { - ml403_early_serial_map(); + virtex_early_serial_map(); ppc4xx_setup_arch(); /* calls ppc4xx_find_bridges() */ /* Identify the system */ @@ -159,8 +105,6 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, { ppc4xx_init(r3, r4, r5, r6, r7); - identify_ppc_sys_by_id(mfspr(SPRN_PVR)); - ppc_md.setup_arch = ml403_setup_arch; ppc_md.setup_io_mappings = ml403_map_io; ppc_md.init_IRQ = ml403_init_irq; @@ -170,7 +114,7 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5, #endif #ifdef CONFIG_KGDB - ppc_md.early_serial_map = ml403_early_serial_map; + ppc_md.early_serial_map = virtex_early_serial_map; #endif } diff --git a/arch/ppc/platforms/4xx/xilinx_ml403.h b/arch/ppc/platforms/4xx/xilinx_ml403.h deleted file mode 100644 index 473596959902..000000000000 --- a/arch/ppc/platforms/4xx/xilinx_ml403.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * arch/ppc/platforms/4xx/xilinx_ml403.h - * - * Include file that defines the Xilinx ML403 reference design - * - * Author: Grant Likely <grant.likely@secretlab.ca> - * - * 2005 (c) Secret Lab Technologies Ltd. - * 2002-2004 (c) MontaVista Software, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -#ifdef __KERNEL__ -#ifndef __ASM_XILINX_ML403_H__ -#define __ASM_XILINX_ML403_H__ - -/* ML403 has a Xilinx Virtex-4 FPGA with a PPC405 hard core */ -#include <platforms/4xx/virtex.h> - -#ifndef __ASSEMBLY__ - -#include <linux/types.h> - -typedef struct board_info { - unsigned int bi_memsize; /* DRAM installed, in bytes */ - unsigned char bi_enetaddr[6]; /* Local Ethernet MAC address */ - unsigned int bi_intfreq; /* Processor speed, in Hz */ - unsigned int bi_busfreq; /* PLB Bus speed, in Hz */ - unsigned int bi_pci_busfreq; /* PCI Bus speed, in Hz */ -} bd_t; - -/* Some 4xx parts use a different timebase frequency from the internal clock. -*/ -#define bi_tbfreq bi_intfreq - -#endif /* !__ASSEMBLY__ */ - -/* We don't need anything mapped. Size of zero will accomplish that. */ -#define PPC4xx_ONB_IO_PADDR 0u -#define PPC4xx_ONB_IO_VADDR 0u -#define PPC4xx_ONB_IO_SIZE 0u - -#define PPC4xx_MACHINE_NAME "Xilinx ML403 Reference Design" - -#endif /* __ASM_XILINX_ML403_H__ */ -#endif /* __KERNEL__ */ diff --git a/arch/ppc/platforms/4xx/xparameters/xparameters.h b/arch/ppc/platforms/4xx/xparameters/xparameters.h index 66ec5f35f306..01aa043ff381 100644 --- a/arch/ppc/platforms/4xx/xparameters/xparameters.h +++ b/arch/ppc/platforms/4xx/xparameters/xparameters.h @@ -34,3 +34,63 @@ .io_type = SERIAL_IO_MEM, \ }, #endif + +/* + * A few reasonable defaults for the #defines which could be missing depending + * on the IP version or variant (e.g. OPB vs PLB) + */ + +#ifndef XPAR_EMAC_0_CAM_EXIST +#define XPAR_EMAC_0_CAM_EXIST 0 +#endif +#ifndef XPAR_EMAC_0_JUMBO_EXIST +#define XPAR_EMAC_0_JUMBO_EXIST 0 +#endif +#ifndef XPAR_EMAC_0_TX_DRE_TYPE +#define XPAR_EMAC_0_TX_DRE_TYPE 0 +#endif +#ifndef XPAR_EMAC_0_RX_DRE_TYPE +#define XPAR_EMAC_0_RX_DRE_TYPE 0 +#endif +#ifndef XPAR_EMAC_0_TX_INCLUDE_CSUM +#define XPAR_EMAC_0_TX_INCLUDE_CSUM 0 +#endif +#ifndef XPAR_EMAC_0_RX_INCLUDE_CSUM +#define XPAR_EMAC_0_RX_INCLUDE_CSUM 0 +#endif + +#ifndef XPAR_EMAC_1_CAM_EXIST +#define XPAR_EMAC_1_CAM_EXIST 0 +#endif +#ifndef XPAR_EMAC_1_JUMBO_EXIST +#define XPAR_EMAC_1_JUMBO_EXIST 0 +#endif +#ifndef XPAR_EMAC_1_TX_DRE_TYPE +#define XPAR_EMAC_1_TX_DRE_TYPE 0 +#endif +#ifndef XPAR_EMAC_1_RX_DRE_TYPE +#define XPAR_EMAC_1_RX_DRE_TYPE 0 +#endif +#ifndef XPAR_EMAC_1_TX_INCLUDE_CSUM +#define XPAR_EMAC_1_TX_INCLUDE_CSUM 0 +#endif +#ifndef XPAR_EMAC_1_RX_INCLUDE_CSUM +#define XPAR_EMAC_1_RX_INCLUDE_CSUM 0 +#endif + +#ifndef XPAR_GPIO_0_IS_DUAL +#define XPAR_GPIO_0_IS_DUAL 0 +#endif +#ifndef XPAR_GPIO_1_IS_DUAL +#define XPAR_GPIO_1_IS_DUAL 0 +#endif +#ifndef XPAR_GPIO_2_IS_DUAL +#define XPAR_GPIO_2_IS_DUAL 0 +#endif +#ifndef XPAR_GPIO_3_IS_DUAL +#define XPAR_GPIO_3_IS_DUAL 0 +#endif +#ifndef XPAR_GPIO_4_IS_DUAL +#define XPAR_GPIO_4_IS_DUAL 0 +#endif + diff --git a/arch/ppc/platforms/rpxclassic.h b/arch/ppc/platforms/rpxclassic.h index 57a2a55dab8c..a3c1118e5b09 100644 --- a/arch/ppc/platforms/rpxclassic.h +++ b/arch/ppc/platforms/rpxclassic.h @@ -69,10 +69,6 @@ extern bd_t m8xx_board_info; #define BCSR2_QSPACESEL ((uint)0x00004000) #define BCSR2_FETHLEDMODE ((uint)0x00000800) /* CLLF */ -#if defined(CONFIG_HTDMSOUND) -#include <platforms/rpxhiox.h> -#endif - /* define IO_BASE for pcmcia, CLLF only */ #if !defined(CONFIG_PCI) #define _IO_BASE 0x80000000 diff --git a/arch/ppc/platforms/rpxhiox.h b/arch/ppc/platforms/rpxhiox.h deleted file mode 100644 index c3fa5a653762..000000000000 --- a/arch/ppc/platforms/rpxhiox.h +++ /dev/null @@ -1,41 +0,0 @@ -/* - * The Embedded Planet HIOX expansion card definitions. - * There were a few different versions of these cards, but only - * the one that escaped real production is defined here. - * - * Copyright (c) 2000 Dan Malek (dmalek@jlc.net) - */ -#ifndef __MACH_RPX_HIOX_DEFS -#define __MACH_RPX_HIOX_DEFS - -#define HIOX_CSR_ADDR ((uint)0xfac00000) -#define HIOX_CSR_SIZE ((uint)(4 * 1024)) -#define HIOX_CSR0_ADDR HIOX_CSR_ADDR -#define HIOX_CSR4_ADDR ((uint)0xfac00004) - -#define HIOX_CSR0_DEFAULT ((uint)0x380f3c00) -#define HIOX_CSR0_ENSCC2 ((uint)0x80000000) -#define HIOX_CSR0_ENSMC2 ((uint)0x04000000) -#define HIOX_CSR0_ENVDOCLK ((uint)0x02000000) -#define HIOX_CSR0_VDORST_HL ((uint)0x01000000) -#define HIOX_CSR0_RS232SEL ((uint)0x0000c000) -#define HIOX_CSR0_SCC3SEL ((uint)0x0000c000) -#define HIOX_CSR0_SMC1SEL ((uint)0x00008000) -#define HIOX_CSR0_SCC1SEL ((uint)0x00004000) -#define HIOX_CSR0_ENTOUCH ((uint)0x00000080) -#define HIOX_CSR0_PDOWN100 ((uint)0x00000060) -#define HIOX_CSR0_PDOWN10 ((uint)0x00000040) -#define HIOX_CSR0_PDOWN1 ((uint)0x00000020) -#define HIOX_CSR0_TSELSPI ((uint)0x00000010) -#define HIOX_CSR0_TIRQSTAT ((uint)0x00000008) -#define HIOX_CSR4_DEFAULT ((uint)0x00000000) -#define HIOX_CSR4_ENTIRQ2 ((uint)0x20000000) -#define HIOX_CSR4_ENTIRQ3 ((uint)0x10000000) -#define HIOX_CSR4_ENAUDIO ((uint)0x00000080) -#define HIOX_CSR4_RSTAUDIO ((uint)0x00000040) /* 0 == reset */ -#define HIOX_CSR4_AUDCLKHI ((uint)0x00000020) -#define HIOX_CSR4_AUDSPISEL ((uint)0x00000010) -#define HIOX_CSR4_AUDIRQSTAT ((uint)0x00000008) -#define HIOX_CSR4_AUDCLKSEL ((uint)0x00000007) - -#endif diff --git a/arch/ppc/platforms/rpxlite.h b/arch/ppc/platforms/rpxlite.h index 719780646270..b615501d55fc 100644 --- a/arch/ppc/platforms/rpxlite.h +++ b/arch/ppc/platforms/rpxlite.h @@ -57,10 +57,6 @@ extern bd_t m8xx_board_info; #define BCSR1_PCVCTL6 ((uint)0x00020000) #define BCSR1_PCVCTL7 ((uint)0x00010000) -#if defined(CONFIG_HTDMSOUND) -#include <platforms/rpxhiox.h> -#endif - /* define IO_BASE for pcmcia */ #define _IO_BASE 0x80000000 #define _IO_BASE_SIZE 0x1000 diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile index 09911118c675..95694159b226 100644 --- a/arch/ppc/syslib/Makefile +++ b/arch/ppc/syslib/Makefile @@ -18,7 +18,8 @@ obj-$(CONFIG_440SP) += ibm440gx_common.o ibm440sp_common.o obj-$(CONFIG_440SPE) += ibm440gx_common.o ibm440sp_common.o ppc440spe_pcie.o ifeq ($(CONFIG_4xx),y) ifeq ($(CONFIG_XILINX_VIRTEX),y) -obj-$(CONFIG_40x) += xilinx_pic.o ppc_sys.o +obj-$(CONFIG_40x) += xilinx_pic.o +obj-y += virtex_devices.o else ifeq ($(CONFIG_403),y) obj-$(CONFIG_40x) += ppc403_pic.o diff --git a/arch/ppc/syslib/cpc710.h b/arch/ppc/syslib/cpc710.h deleted file mode 100644 index 5299bf8b5d01..000000000000 --- a/arch/ppc/syslib/cpc710.h +++ /dev/null @@ -1,81 +0,0 @@ -/* - * Definitions for the IBM CPC710 PCI Host Bridge - * - * Author: Matt Porter <mporter@mvista.com> - * - * 2001 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifndef __PPC_PLATFORMS_CPC710_H -#define __PPC_PLATFORMS_CPC710_H - -/* General bridge and memory controller registers */ -#define PIDR 0xff000008 -#define CNFR 0xff00000c -#define RSTR 0xff000010 -#define UCTL 0xff001000 -#define MPSR 0xff001010 -#define SIOC 0xff001020 -#define ABCNTL 0xff001030 -#define SRST 0xff001040 -#define ERRC 0xff001050 -#define SESR 0xff001060 -#define SEAR 0xff001070 -#define SIOC1 0xff001090 -#define PGCHP 0xff001100 -#define GPDIR 0xff001130 -#define GPOUT 0xff001150 -#define ATAS 0xff001160 -#define AVDG 0xff001170 -#define MCCR 0xff001200 -#define MESR 0xff001220 -#define MEAR 0xff001230 -#define MCER0 0xff001300 -#define MCER1 0xff001310 -#define MCER2 0xff001320 -#define MCER3 0xff001330 -#define MCER4 0xff001340 -#define MCER5 0xff001350 -#define MCER6 0xff001360 -#define MCER7 0xff001370 - -/* - * PCI32/64 configuration registers - * Given as offsets from their - * respective physical segment BAR - */ -#define PIBAR 0x000f7800 -#define PMBAR 0x000f7810 -#define MSIZE 0x000f7f40 -#define IOSIZE 0x000f7f60 -#define SMBAR 0x000f7f80 -#define SIBAR 0x000f7fc0 -#define PSSIZE 0x000f8100 -#define PPSIZE 0x000f8110 -#define BARPS 0x000f8120 -#define BARPP 0x000f8130 -#define PSBAR 0x000f8140 -#define PPBAR 0x000f8150 -#define BPMDLK 0x000f8200 /* Bottom of Peripheral Memory Space */ -#define TPMDLK 0x000f8210 /* Top of Peripheral Memory Space */ -#define BIODLK 0x000f8220 /* Bottom of Peripheral I/O Space */ -#define TIODLK 0x000f8230 /* Top of Perioheral I/O Space */ -#define DLKCTRL 0x000f8240 /* Deadlock control */ -#define DLKDEV 0x000f8250 /* Deadlock device */ - -/* System standard configuration registers space */ -#define DCR 0xff200000 -#define DID 0xff200004 -#define BAR 0xff200018 - -/* Device specific configuration space */ -#define PCIENB 0xff201000 - -/* Configuration space registers */ -#define CPC710_BUS_NUMBER 0x40 -#define CPC710_SUB_BUS_NUMBER 0x41 - -#endif /* __PPC_PLATFORMS_CPC710_H */ diff --git a/arch/ppc/syslib/m8xx_setup.c b/arch/ppc/syslib/m8xx_setup.c index 01e48d88f22d..9caf850c9b38 100644 --- a/arch/ppc/syslib/m8xx_setup.c +++ b/arch/ppc/syslib/m8xx_setup.c @@ -413,7 +413,7 @@ m8xx_map_io(void) io_block_mapping(_IO_BASE,_IO_BASE,_IO_BASE_SIZE, _PAGE_IO); #endif #endif -#if defined(CONFIG_HTDMSOUND) || defined(CONFIG_RPXTOUCH) || defined(CONFIG_FB_RPX) +#if defined(CONFIG_RPXTOUCH) || defined(CONFIG_FB_RPX) io_block_mapping(HIOX_CSR_ADDR, HIOX_CSR_ADDR, HIOX_CSR_SIZE, _PAGE_IO); #endif #ifdef CONFIG_FADS diff --git a/arch/ppc/syslib/ppc4xx_sgdma.c b/arch/ppc/syslib/ppc4xx_sgdma.c index 2f83e162971f..939abe3c1f45 100644 --- a/arch/ppc/syslib/ppc4xx_sgdma.c +++ b/arch/ppc/syslib/ppc4xx_sgdma.c @@ -27,6 +27,7 @@ #include <asm/system.h> #include <asm/io.h> +#include <asm/dma-mapping.h> #include <asm/ppc4xx_dma.h> void diff --git a/arch/ppc/syslib/virtex_devices.c b/arch/ppc/syslib/virtex_devices.c new file mode 100644 index 000000000000..16546788e23b --- /dev/null +++ b/arch/ppc/syslib/virtex_devices.c @@ -0,0 +1,233 @@ +/* + * Virtex hard ppc405 core common device listing + * + * Copyright 2005-2007 Secret Lab Technologies Ltd. + * Copyright 2005 Freescale Semiconductor Inc. + * Copyright 2002-2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/serial_8250.h> +#include <syslib/virtex_devices.h> +#include <platforms/4xx/xparameters/xparameters.h> +#include <asm/io.h> + +/* + * UARTLITE: shortcut macro for single instance + */ +#define XPAR_UARTLITE(num) { \ + .name = "uartlite", \ + .id = num, \ + .num_resources = 2, \ + .resource = (struct resource[]) { \ + { \ + .start = XPAR_UARTLITE_##num##_BASEADDR + 3, \ + .end = XPAR_UARTLITE_##num##_HIGHADDR, \ + .flags = IORESOURCE_MEM, \ + }, \ + { \ + .start = XPAR_INTC_0_UARTLITE_##num##_VEC_ID, \ + .flags = IORESOURCE_IRQ, \ + }, \ + }, \ +} + +/* + * Full UART: shortcut macro for single instance + platform data structure + */ +#define XPAR_UART(num) { \ + .mapbase = XPAR_UARTNS550_##num##_BASEADDR + 3, \ + .irq = XPAR_INTC_0_UARTNS550_##num##_VEC_ID, \ + .iotype = UPIO_MEM, \ + .uartclk = XPAR_UARTNS550_##num##_CLOCK_FREQ_HZ, \ + .flags = UPF_BOOT_AUTOCONF, \ + .regshift = 2, \ +} + +/* + * SystemACE: shortcut macro for single instance + */ +#define XPAR_SYSACE(num) { \ + .name = "xsysace", \ + .id = XPAR_SYSACE_##num##_DEVICE_ID, \ + .num_resources = 2, \ + .resource = (struct resource[]) { \ + { \ + .start = XPAR_SYSACE_##num##_BASEADDR, \ + .end = XPAR_SYSACE_##num##_HIGHADDR, \ + .flags = IORESOURCE_MEM, \ + }, \ + { \ + .start = XPAR_INTC_0_SYSACE_##num##_VEC_ID, \ + .flags = IORESOURCE_IRQ, \ + }, \ + }, \ +} + + +/* UART 8250 driver platform data table */ +struct plat_serial8250_port virtex_serial_platform_data[] = { +#if defined(XPAR_UARTNS550_0_BASEADDR) + XPAR_UART(0), +#endif +#if defined(XPAR_UARTNS550_1_BASEADDR) + XPAR_UART(1), +#endif +#if defined(XPAR_UARTNS550_2_BASEADDR) + XPAR_UART(2), +#endif +#if defined(XPAR_UARTNS550_3_BASEADDR) + XPAR_UART(3), +#endif +#if defined(XPAR_UARTNS550_4_BASEADDR) + XPAR_UART(4), +#endif +#if defined(XPAR_UARTNS550_5_BASEADDR) + XPAR_UART(5), +#endif +#if defined(XPAR_UARTNS550_6_BASEADDR) + XPAR_UART(6), +#endif +#if defined(XPAR_UARTNS550_7_BASEADDR) + XPAR_UART(7), +#endif + { }, /* terminated by empty record */ +}; + + +struct platform_device virtex_platform_devices[] = { + /* UARTLITE instances */ +#if defined(XPAR_UARTLITE_0_BASEADDR) + XPAR_UARTLITE(0), +#endif +#if defined(XPAR_UARTLITE_1_BASEADDR) + XPAR_UARTLITE(1), +#endif +#if defined(XPAR_UARTLITE_2_BASEADDR) + XPAR_UARTLITE(2), +#endif +#if defined(XPAR_UARTLITE_3_BASEADDR) + XPAR_UARTLITE(3), +#endif +#if defined(XPAR_UARTLITE_4_BASEADDR) + XPAR_UARTLITE(4), +#endif +#if defined(XPAR_UARTLITE_5_BASEADDR) + XPAR_UARTLITE(5), +#endif +#if defined(XPAR_UARTLITE_6_BASEADDR) + XPAR_UARTLITE(6), +#endif +#if defined(XPAR_UARTLITE_7_BASEADDR) + XPAR_UARTLITE(7), +#endif + + /* Full UART instances */ +#if defined(XPAR_UARTNS550_0_BASEADDR) + { + .name = "serial8250", + .id = 0, + .dev.platform_data = virtex_serial_platform_data, + }, +#endif + + /* SystemACE instances */ +#if defined(XPAR_SYSACE_0_BASEADDR) + XPAR_SYSACE(0), +#endif +#if defined(XPAR_SYSACE_1_BASEADDR) + XPAR_SYSACE(1), +#endif + + /* ML300/403 reference design framebuffer */ +#if defined(XPAR_TFT_0_BASEADDR) + { + .name = "xilinxfb", + .id = 0, + .num_resources = 1, + .resource = (struct resource[]) { + { + .start = XPAR_TFT_0_BASEADDR, + .end = XPAR_TFT_0_BASEADDR+7, + .flags = IORESOURCE_IO, + }, + }, + }, +#endif +}; + +/* Early serial support functions */ +static void __init +virtex_early_serial_init(int num, struct plat_serial8250_port *pdata) +{ +#if defined(CONFIG_SERIAL_TEXT_DEBUG) || defined(CONFIG_KGDB) + struct uart_port serial_req; + + memset(&serial_req, 0, sizeof(serial_req)); + serial_req.mapbase = pdata->mapbase; + serial_req.membase = pdata->membase; + serial_req.irq = pdata->irq; + serial_req.uartclk = pdata->uartclk; + serial_req.regshift = pdata->regshift; + serial_req.iotype = pdata->iotype; + serial_req.flags = pdata->flags; + gen550_init(num, &serial_req); +#endif +} + +void __init +virtex_early_serial_map(void) +{ +#ifdef CONFIG_SERIAL_8250 + struct plat_serial8250_port *pdata; + int i = 0; + + pdata = virtex_serial_platform_data; + while(pdata && pdata->flags) { + pdata->membase = ioremap(pdata->mapbase, 0x100); + virtex_early_serial_init(i, pdata); + pdata++; + i++; + } +#endif /* CONFIG_SERIAL_8250 */ +} + +/* + * default fixup routine; do nothing and return success. + * + * Reimplement this routine in your custom board support file to + * override the default behaviour + */ +int __attribute__ ((weak)) +virtex_device_fixup(struct platform_device *dev) +{ + return 0; +} + +static int __init virtex_init(void) +{ + struct platform_device *index = virtex_platform_devices; + unsigned int ret = 0; + int i; + + for (i = 0; i < ARRAY_SIZE(virtex_platform_devices); i++, index++) { + if (virtex_device_fixup(index) != 0) + continue; + + if (platform_device_register(index)) { + ret = 1; + printk(KERN_ERR "cannot register dev %s:%d\n", + index->name, index->id); + } + } + return ret; +} + +subsys_initcall(virtex_init); diff --git a/arch/ppc/syslib/virtex_devices.h b/arch/ppc/syslib/virtex_devices.h new file mode 100644 index 000000000000..4a17dd3927c1 --- /dev/null +++ b/arch/ppc/syslib/virtex_devices.h @@ -0,0 +1,27 @@ +/* + * Common support header for virtex ppc405 platforms + * + * Copyright 2007 Secret Lab Technologies Ltd. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef __ASM_VIRTEX_DEVICES_H__ +#define __ASM_VIRTEX_DEVICES_H__ + +#include <linux/platform_device.h> + +void __init virtex_early_serial_map(void); + +/* Prototype for device fixup routine. Implement this routine in the + * board specific fixup code and the generic setup code will call it for + * each device is the platform device list. + * + * If the hook returns a non-zero value, then the device will not get + * registered with the platform bus + */ +int virtex_device_fixup(struct platform_device *dev); + +#endif /* __ASM_VIRTEX_DEVICES_H__ */ |