summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/serial/mpc52xx_uart.c116
1 files changed, 57 insertions, 59 deletions
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 4f80c5b4a753..8e24133166af 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -1,6 +1,4 @@
/*
- * drivers/serial/mpc52xx_uart.c
- *
* Driver for the PSC of the Freescale MPC52xx PSCs configured as UARTs.
*
* FIXME According to the usermanual the status bits in the status register
@@ -14,18 +12,18 @@
*
*
* Maintainer : Sylvain Munaut <tnt@246tNt.com>
- *
+ *
* Some of the code has been inspired/copied from the 2.4 code written
* by Dale Farnsworth <dfarnsworth@mvista.com>.
- *
+ *
* Copyright (C) 2004-2005 Sylvain Munaut <tnt@246tNt.com>
* Copyright (C) 2003 MontaVista, Software, Inc.
- *
+ *
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
-
+
/* Platform device Usage :
*
* Since PSCs can have multiple function, the correct driver for each one
@@ -101,27 +99,27 @@ static irqreturn_t mpc52xx_uart_int(int irq,void *dev_id);
/* UART operations */
/* ======================================================================== */
-static unsigned int
+static unsigned int
mpc52xx_uart_tx_empty(struct uart_port *port)
{
int status = in_be16(&PSC(port)->mpc52xx_psc_status);
return (status & MPC52xx_PSC_SR_TXEMP) ? TIOCSER_TEMT : 0;
}
-static void
+static void
mpc52xx_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
/* Not implemented */
}
-static unsigned int
+static unsigned int
mpc52xx_uart_get_mctrl(struct uart_port *port)
{
/* Not implemented */
return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
}
-static void
+static void
mpc52xx_uart_stop_tx(struct uart_port *port)
{
/* port->lock taken by caller */
@@ -129,7 +127,7 @@ mpc52xx_uart_stop_tx(struct uart_port *port)
out_be16(&PSC(port)->mpc52xx_psc_imr,port->read_status_mask);
}
-static void
+static void
mpc52xx_uart_start_tx(struct uart_port *port)
{
/* port->lock taken by caller */
@@ -137,12 +135,12 @@ mpc52xx_uart_start_tx(struct uart_port *port)
out_be16(&PSC(port)->mpc52xx_psc_imr,port->read_status_mask);
}
-static void
+static void
mpc52xx_uart_send_xchar(struct uart_port *port, char ch)
{
unsigned long flags;
spin_lock_irqsave(&port->lock, flags);
-
+
port->x_char = ch;
if (ch) {
/* Make sure tx interrupts are on */
@@ -150,7 +148,7 @@ mpc52xx_uart_send_xchar(struct uart_port *port, char ch)
port->read_status_mask |= MPC52xx_PSC_IMR_TXRDY;
out_be16(&PSC(port)->mpc52xx_psc_imr,port->read_status_mask);
}
-
+
spin_unlock_irqrestore(&port->lock, flags);
}
@@ -178,7 +176,7 @@ mpc52xx_uart_break_ctl(struct uart_port *port, int ctl)
out_8(&PSC(port)->command,MPC52xx_PSC_START_BRK);
else
out_8(&PSC(port)->command,MPC52xx_PSC_STOP_BRK);
-
+
spin_unlock_irqrestore(&port->lock, flags);
}
@@ -197,11 +195,11 @@ mpc52xx_uart_startup(struct uart_port *port)
/* Reset/activate the port, clear and enable interrupts */
out_8(&psc->command,MPC52xx_PSC_RST_RX);
out_8(&psc->command,MPC52xx_PSC_RST_TX);
-
+
out_be32(&psc->sicr,0); /* UART mode DCD ignored */
out_be16(&psc->mpc52xx_psc_clock_select, 0xdd00); /* /16 prescaler on */
-
+
out_8(&psc->rfcntl, 0x00);
out_be16(&psc->rfalarm, 0x1ff);
out_8(&psc->tfcntl, 0x07);
@@ -209,10 +207,10 @@ mpc52xx_uart_startup(struct uart_port *port)
port->read_status_mask |= MPC52xx_PSC_IMR_RXRDY | MPC52xx_PSC_IMR_TXRDY;
out_be16(&psc->mpc52xx_psc_imr,port->read_status_mask);
-
+
out_8(&psc->command,MPC52xx_PSC_TX_ENABLE);
out_8(&psc->command,MPC52xx_PSC_RX_ENABLE);
-
+
return 0;
}
@@ -220,19 +218,19 @@ static void
mpc52xx_uart_shutdown(struct uart_port *port)
{
struct mpc52xx_psc __iomem *psc = PSC(port);
-
+
/* Shut down the port, interrupt and all */
out_8(&psc->command,MPC52xx_PSC_RST_RX);
out_8(&psc->command,MPC52xx_PSC_RST_TX);
-
- port->read_status_mask = 0;
+
+ port->read_status_mask = 0;
out_be16(&psc->mpc52xx_psc_imr,port->read_status_mask);
/* Release interrupt */
free_irq(port->irq, port);
}
-static void
+static void
mpc52xx_uart_set_termios(struct uart_port *port, struct termios *new,
struct termios *old)
{
@@ -241,10 +239,10 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct termios *new,
unsigned char mr1, mr2;
unsigned short ctr;
unsigned int j, baud, quot;
-
+
/* Prepare what we're gonna write */
mr1 = 0;
-
+
switch (new->c_cflag & CSIZE) {
case CS5: mr1 |= MPC52xx_PSC_MODE_5_BITS;
break;
@@ -261,8 +259,8 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct termios *new,
MPC52xx_PSC_MODE_PARODD : MPC52xx_PSC_MODE_PAREVEN;
} else
mr1 |= MPC52xx_PSC_MODE_PARNONE;
-
-
+
+
mr2 = 0;
if (new->c_cflag & CSTOPB)
@@ -276,7 +274,7 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct termios *new,
baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16);
quot = uart_get_divisor(port, baud);
ctr = quot & 0xffff;
-
+
/* Get the lock */
spin_lock_irqsave(&port->lock, flags);
@@ -290,14 +288,14 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct termios *new,
* boot for the console, all stuff is not yet ready to receive at that
* time and that just makes the kernel oops */
/* while (j-- && mpc52xx_uart_int_rx_chars(port)); */
- while (!(in_be16(&psc->mpc52xx_psc_status) & MPC52xx_PSC_SR_TXEMP) &&
+ while (!(in_be16(&psc->mpc52xx_psc_status) & MPC52xx_PSC_SR_TXEMP) &&
--j)
udelay(1);
if (!j)
printk( KERN_ERR "mpc52xx_uart.c: "
"Unable to flush RX & TX fifos in-time in set_termios."
- "Some chars may have been lost.\n" );
+ "Some chars may have been lost.\n" );
/* Reset the TX & RX */
out_8(&psc->command,MPC52xx_PSC_RST_RX);
@@ -309,7 +307,7 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct termios *new,
out_8(&psc->mode,mr2);
out_8(&psc->ctur,ctr >> 8);
out_8(&psc->ctlr,ctr & 0xff);
-
+
/* Reenable TX & RX */
out_8(&psc->command,MPC52xx_PSC_TX_ENABLE);
out_8(&psc->command,MPC52xx_PSC_RX_ENABLE);
@@ -373,7 +371,7 @@ mpc52xx_uart_verify_port(struct uart_port *port, struct serial_struct *ser)
if ( (ser->irq != port->irq) ||
(ser->io_type != SERIAL_IO_MEM) ||
- (ser->baud_base != port->uartclk) ||
+ (ser->baud_base != port->uartclk) ||
(ser->iomem_base != (void*)port->mapbase) ||
(ser->hub6 != 0 ) )
return -EINVAL;
@@ -404,11 +402,11 @@ static struct uart_ops mpc52xx_uart_ops = {
.verify_port = mpc52xx_uart_verify_port
};
-
+
/* ======================================================================== */
/* Interrupt handling */
/* ======================================================================== */
-
+
static inline int
mpc52xx_uart_int_rx_chars(struct uart_port *port)
{
@@ -435,11 +433,11 @@ mpc52xx_uart_int_rx_chars(struct uart_port *port)
flag = TTY_NORMAL;
port->icount.rx++;
-
+
if ( status & (MPC52xx_PSC_SR_PE |
MPC52xx_PSC_SR_FE |
MPC52xx_PSC_SR_RB) ) {
-
+
if (status & MPC52xx_PSC_SR_RB) {
flag = TTY_BREAK;
uart_handle_break(port);
@@ -464,7 +462,7 @@ mpc52xx_uart_int_rx_chars(struct uart_port *port)
}
tty_flip_buffer_push(tty);
-
+
return in_be16(&PSC(port)->mpc52xx_psc_status) & MPC52xx_PSC_SR_RXRDY;
}
@@ -509,25 +507,25 @@ mpc52xx_uart_int_tx_chars(struct uart_port *port)
return 1;
}
-static irqreturn_t
+static irqreturn_t
mpc52xx_uart_int(int irq, void *dev_id)
{
struct uart_port *port = dev_id;
unsigned long pass = ISR_PASS_LIMIT;
unsigned int keepgoing;
unsigned short status;
-
+
spin_lock(&port->lock);
-
+
/* While we have stuff to do, we continue */
do {
/* If we don't find anything to do, we stop */
- keepgoing = 0;
-
+ keepgoing = 0;
+
/* Read status */
status = in_be16(&PSC(port)->mpc52xx_psc_isr);
status &= port->read_status_mask;
-
+
/* Do we need to receive chars ? */
/* For this RX interrupts must be on and some chars waiting */
if ( status & MPC52xx_PSC_IMR_RXRDY )
@@ -537,15 +535,15 @@ mpc52xx_uart_int(int irq, void *dev_id)
/* For this, TX must be ready and TX interrupt enabled */
if ( status & MPC52xx_PSC_IMR_TXRDY )
keepgoing |= mpc52xx_uart_int_tx_chars(port);
-
+
/* Limit number of iteration */
if ( !(--pass) )
keepgoing = 0;
} while (keepgoing);
-
+
spin_unlock(&port->lock);
-
+
return IRQ_HANDLED;
}
@@ -566,7 +564,7 @@ mpc52xx_console_get_options(struct uart_port *port,
/* Read the mode registers */
out_8(&psc->command,MPC52xx_PSC_SEL_MODE_REG_1);
mr1 = in_8(&psc->mode);
-
+
/* CT{U,L}R are write-only ! */
*baud = __res.bi_baudrate ?
__res.bi_baudrate : CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD;
@@ -579,26 +577,26 @@ mpc52xx_console_get_options(struct uart_port *port,
case MPC52xx_PSC_MODE_8_BITS:
default: *bits = 8;
}
-
+
if (mr1 & MPC52xx_PSC_MODE_PARNONE)
*parity = 'n';
else
*parity = mr1 & MPC52xx_PSC_MODE_PARODD ? 'o' : 'e';
}
-static void
+static void
mpc52xx_console_write(struct console *co, const char *s, unsigned int count)
{
struct uart_port *port = &mpc52xx_uart_ports[co->index];
struct mpc52xx_psc __iomem *psc = PSC(port);
unsigned int i, j;
-
+
/* Disable interrupts */
out_be16(&psc->mpc52xx_psc_imr, 0);
/* Wait the TX buffer to be empty */
- j = 5000000; /* Maximum wait */
- while (!(in_be16(&psc->mpc52xx_psc_status) & MPC52xx_PSC_SR_TXEMP) &&
+ j = 5000000; /* Maximum wait */
+ while (!(in_be16(&psc->mpc52xx_psc_status) & MPC52xx_PSC_SR_TXEMP) &&
--j)
udelay(1);
@@ -607,13 +605,13 @@ mpc52xx_console_write(struct console *co, const char *s, unsigned int count)
/* Line return handling */
if (*s == '\n')
out_8(&psc->mpc52xx_psc_buffer_8, '\r');
-
+
/* Send the char */
out_8(&psc->mpc52xx_psc_buffer_8, *s);
/* Wait the TX buffer to be empty */
- j = 20000; /* Maximum wait */
- while (!(in_be16(&psc->mpc52xx_psc_status) &
+ j = 20000; /* Maximum wait */
+ while (!(in_be16(&psc->mpc52xx_psc_status) &
MPC52xx_PSC_SR_TXEMP) && --j)
udelay(1);
}
@@ -634,7 +632,7 @@ mpc52xx_console_setup(struct console *co, char *options)
if (co->index < 0 || co->index >= MPC52xx_PSC_MAXNUM)
return -EINVAL;
-
+
/* Basic port init. Needed since we use some uart_??? func before
* real init for early access */
spin_lock_init(&port->lock);
@@ -669,8 +667,8 @@ static struct console mpc52xx_console = {
.data = &mpc52xx_uart_driver,
};
-
-static int __init
+
+static int __init
mpc52xx_console_init(void)
{
register_console(&mpc52xx_console);
@@ -771,7 +769,7 @@ mpc52xx_uart_suspend(struct platform_device *dev, pm_message_t state)
{
struct uart_port *port = (struct uart_port *) platform_get_drvdata(dev);
- if (sport)
+ if (port)
uart_suspend_port(&mpc52xx_uart_driver, port);
return 0;
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-01 02:40:31 +0000