[POWERPC] Add new interrupt mapping core and change platforms to use it

This adds the new irq remapper core and removes the old one.  Because
there are some fundamental conflicts with the old code, like the value
of NO_IRQ which I'm now setting to 0 (as per discussions with Linus),
etc..., this commit also changes the relevant platform and driver code
over to use the new remapper (so as not to cause difficulties later
in bisecting).

This patch removes the old pre-parsing of the open firmware interrupt
tree along with all the bogus assumptions it made to try to renumber
interrupts according to the platform. This is all to be handled by the
new code now.

For the pSeries XICS interrupt controller, a single remapper host is
created for the whole machine regardless of how many interrupt
presentation and source controllers are found, and it's set to match
any device node that isn't a 8259.  That works fine on pSeries and
avoids having to deal with some of the complexities of split source
controllers vs. presentation controllers in the pSeries device trees.

The powerpc i8259 PIC driver now always requests the legacy interrupt
range. It also has the feature of being able to match any device node
(including NULL) if passed no device node as an input. That will help
porting over platforms with broken device-trees like Pegasos who don't
have a proper interrupt tree.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

1 files changed, 46 insertions, 22 deletions

diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
index d524a915aa86..556b349797e8 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -46,6 +46,9 @@ static int has_uninorth;
 static struct pci_controller *u3_agp;
 static struct pci_controller *u4_pcie;
 static struct pci_controller *u3_ht;
+#define has_second_ohare 0
+#else
+static int has_second_ohare;
 #endif /* CONFIG_PPC64 */
 
 extern u8 pci_cache_line_size;
@@ -647,6 +650,33 @@ static void __init init_p2pbridge(void)
 	early_write_config_word(hose, bus, devfn, PCI_BRIDGE_CONTROL, val);
 }
 
+static void __init init_second_ohare(void)
+{
+	struct device_node *np = of_find_node_by_name(NULL, "pci106b,7");
+	unsigned char bus, devfn;
+	unsigned short cmd;
+
+	if (np == NULL)
+		return;
+
+	/* This must run before we initialize the PICs since the second
+	 * ohare hosts a PIC that will be accessed there.
+	 */
+	if (pci_device_from_OF_node(np, &bus, &devfn) == 0) {
+		struct pci_controller* hose =
+			pci_find_hose_for_OF_device(np);
+		if (!hose) {
+			printk(KERN_ERR "Can't find PCI hose for OHare2 !\n");
+			return;
+		}
+		early_read_config_word(hose, bus, devfn, PCI_COMMAND, &cmd);
+		cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
+		cmd &= ~PCI_COMMAND_IO;
+		early_write_config_word(hose, bus, devfn, PCI_COMMAND, cmd);
+	}
+	has_second_ohare = 1;
+}
+
 /*
  * Some Apple desktop machines have a NEC PD720100A USB2 controller
  * on the motherboard. Open Firmware, on these, will disable the
@@ -688,9 +718,6 @@ static void __init fixup_nec_usb2(void)
 			       " EHCI, fixing up...\n");
 			data &= ~1UL;
 			early_write_config_dword(hose, bus, devfn, 0xe4, data);
-			early_write_config_byte(hose, bus,
-						devfn | 2, PCI_INTERRUPT_LINE,
-				nec->intrs[0].line);
 		}
 	}
 }
@@ -958,32 +985,28 @@ static int __init add_bridge(struct device_node *dev)
 	return 0;
 }
 
-static void __init pcibios_fixup_OF_interrupts(void)
+void __init pmac_pcibios_fixup(void)
 {
 	struct pci_dev* dev = NULL;
 
-	/*
-	 * Open Firmware often doesn't initialize the
-	 * PCI_INTERRUPT_LINE config register properly, so we
-	 * should find the device node and apply the interrupt
-	 * obtained from the OF device-tree
-	 */
 	for_each_pci_dev(dev) {
-		struct device_node *node;
-		node = pci_device_to_OF_node(dev);
-		/* this is the node, see if it has interrupts */
-		if (node && node->n_intrs > 0)
-			dev->irq = node->intrs[0].line;
-		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+		/* Read interrupt from the device-tree */
+		pci_read_irq_line(dev);
+
+		/* Fixup interrupt for the modem/ethernet combo controller.
+		 * on machines with a second ohare chip.
+		 * The number in the device tree (27) is bogus (correct for
+		 * the ethernet-only board but not the combo ethernet/modem
+		 * board). The real interrupt is 28 on the second controller
+		 * -> 28+32 = 60.
+		 */
+		if (has_second_ohare &&
+		    dev->vendor == PCI_VENDOR_ID_DEC &&
+		    dev->device == PCI_DEVICE_ID_DEC_TULIP_PLUS)
+			dev->irq = irq_create_mapping(NULL, 60, 0);
 	}
 }
 
-void __init pmac_pcibios_fixup(void)
-{
-	/* Fixup interrupts according to OF tree */
-	pcibios_fixup_OF_interrupts();
-}
-
 #ifdef CONFIG_PPC64
 static void __init pmac_fixup_phb_resources(void)
 {
@@ -1071,6 +1094,7 @@ void __init pmac_pci_init(void)
 
 #else /* CONFIG_PPC64 */
 	init_p2pbridge();
+	init_second_ohare();
 	fixup_nec_usb2();
 
 	/* We are still having some issues with the Xserve G4, enabling