Age | Commit message (Collapse) | Author | Files | Lines |
|
This commit introduces an abstraction API for handling masked valuators. The
intent is that drivers just allocate a mask, set the data and pass the mask
to the server. The actual storage type of the mask is hidden from the
drivers.
The new calls for drivers are:
valuator_mask_new() /* to allocate a valuator mask */
valuator_mask_zero() /* to reset a mask to zero */
valuator_mask_set() /* to set a valuator value */
The new interface to the server is
xf86PostMotionEventM()
xf86PostButtonEventM()
xf86PostKeyboardEventM()
xf86PostProximityEventM()
all taking a mask instead of the valuator array.
The ValuatorMask is currently defined for MAX_VALUATORS fixed size due to
memory allocation restrictions in SIGIO handlers.
For easier review, a lot of the code still uses separate valuator arrays.
This will be fixed in a later patch.
This patch was initially written by Chase Douglas.
Signed-off-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Chase Douglas <chase.douglas@canonical.com>
|
|
Xorg.log shows error: Valuators reported for non-valuator device.
This is caused by uninitialized valuators.mask in _XkbFilterRedirectKey(),
which trigger the error in UpdateDeviceState().
Signed-off-by: David Ge <davidqge@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Not an actual bug, but gcc can't tell that this variable cannot be
used without being initialized
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
If the button we're about to fake isn't down (or up), don't fake a release
(or press) event for it. Behaviour is the same as before, this just saves
a few cycles.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
|
|
commit 14327858391ebe929b806efb53ad79e789361883
xkb: release XTEST pointer buttons on physical releases. (#28808)
revealed a bug with the XTEST/PointerKeys interaction.
Events resulting from PointerKeys are injected into the event processing
stream, not appended to the event queue. The events generated for the fake
button press include a DeviceChangedEvent (DCE), a raw button event and the
button event itself. The DCE causes the master to switch classes to the
attached XTEST pointer device.
Once the fake button is processed, normal event processing continues with
events in the EQ. The master still contains the XTEST classes, causing some
events to be dropped if e.g. the number of valuators of the event in the
queue exceeds the XTEST device's number of valuators.
Example: the EQ contains the following events, processed one-by-one, left to
right.
[DCE (dev)][Btn down][Btn up][Motion][Motion][...]
^ XkbFakeDeviceButton injects [DCE (XTEST)][Btn up]
Thus the event sequence processed looks like this:
[DCE (dev)][Btn down][Btn up][DCE (XTEST)][Btn up][Motion][Motion][...]
The first DCE causes the master to switch to the device. The button up event
injects a DCE to the XTEST device, causing the following Motion events to be
processed with the master still being on XTEST classes.
This patch post-fixes the injected event sequence with a DCE to restore the
classes of the original slave device, resulting in an event sequence like
this:
[DCE (dev)][Btn down][Btn up][DCE (XTEST)][Btn up][DCE (dev)][Motion][Motion]
Note that this is a simplified description. The event sequence injected by
the PointerKeys code is injected for the master device only and the matching
slave device that caused the injection has already finished processing on
the slave. Furthermore, the injection happens as part of the the XKB layer,
before the unwrapping of the processInputProc takes us into the DIX where
the DCE is actually handled.
Bug reproducible with a device that reports more than 2 valuators. Simply
cause button releases on the device and wait for a "too many valuators"
warning message.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Keith Packard <keithp@keithp.com>
|
|
Fix for OpenSolaris bug 6949755: Mouse Keys are ununusable
and possibly https://bugs.freedesktop.org/show_bug.cgi?id=24856
Ensures waitForUpdate is False before calling SetCursorPosition.
Normally waitForUpdate is False when SilkenMouse is active, True
when it's not. When it's True, the mouse cursor position on
screen is not updated immediately.
This is more critical on Solaris, since we disabled SigIO, thus in turn
disable SilkenMouse, due to the SSE2 vs. signal handler issues described in
Sun bugs 6849925, 6859428, and 6879897.
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
If a button release event is posted for the MD pointer, post a release event
through the matching XTEST device. This way, a client who posts a button
press through the XTEST extension cannot inadvertedly lock the button.
This behaviour is required for historical reasons, until server 1.7 the core
pointer would release a button press on physical events, regardless of the
XTEST state. Clients seem to rely on this behaviour, causing seemingly stuck
grabs.
The merged behaviour is kept for multiple keyboard PointerKey events, if two
physical keyboards hold the button down as a result of PointerKey actions,
the button is not released until the last keyboard releases the button.
X.Org Bug 28808 <http://bugs.freedesktop.org/show_bug.cgi?id=28808>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
This patch replicates the behaviour for button events. Only generate a
PointerKeys motion event on the master device, not on the slave device.
Fixes the current issue of PointerKey motion events generating key events as
well.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Problem:
lockedPtrButtons keeps the state of the buttons locked by a PointerKeys button
press. Unconditionally clearing the bits may cause stuck buttons in this
sequence of events:
1. type Shift + NumLock to enable PointerKeys
2. type 0/Ins on keypad to emulate Button 1 press
→ button1 press event to client
3. press and release button 1 on physical mouse
→ button1 release event to client
Button 1 on the MD is now stuck and cannot be released.
Cause:
XKB PointerKeys button events are posted through the XTEST pointer device.
Once a press is generated, the XTEST device's button is down. The DIX merges
the button state of all attached SDs, hence the MD will have a button down
while the XTEST device has a button down.
PointerKey button events are only generated on the master device to avoid
duplicate events (see XkbFakeDeviceButton()). If the MD has the
lockedPtrButtons bit cleared by a release event on a physical device, no
such event is generated when a keyboard device triggers the PointerKey
ButtonRelease trigger. Since the event - if generated - is posted through
the XTEST pointer device, lack of a generated ButtonRelease event on the
XTEST pointer device means the button is never released, resulting in the
stuck button observed above.
Solution:
This patch merges the MD's lockedPtrButtons with the one of all attached
slave devices on release events. Thus, as long as one attached keyboard has
a lockedPtrButtons bit set, this bit is kept in the MD. Once a PointerKey
button is released on all keyboards, the matching release event is emulated
from the MD through the XTEST pointer device, thus also releasing the button
in the DIX.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Make sure all of the private keys used by the test code are
initialized before being used.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Robert Hooker <sarvatt@ubuntu.com>
|
|
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Marcin Baczyński <marbacz@gmail.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
|
|
This patch only changes the API, not the implementation of the
devPrivates infrastructure. This will permit a new devPrivates
implementation to be layed into the server without requiring
simultaneous changes in every devPrivates user.
Signed-off-by: Keith Packard <keithp@keithp.com>
Tested-by: Tiago Vignatti <tiago.vignatti@nokia.com>
|
|
The only remaining X-functions used in server are XNF*, the rest is converted to
plain alloc/calloc/realloc/free/strdup.
X* functions are still exported from server and x* macros are still defined in
header file, so both ABI and API are not affected by this change.
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
The name XkbDDXFakeDeviceButton and XkbDDXFakeDeviceMotion is somewhat
misleading, there's no DDX involved in the game at all anymore.
This removes XkbFakeDeviceMotion and XkbFakeDeviceButton from the API where
it arguably shouldn't have been in the first place.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
|
|
Section 4.6.1 of the XKB spec says that "the initial event always moves the
cursor the distance specified in the action [...]", so skip the
POINTER_ACCELERATE flag for GPE, it would cause double-acceleration.
Potential regression - GPE expects the coordinates to be either relative or
both. XKB in theory allows for x to be relative and y to be absolute (or
vice versa). Let's pretend that scenario has no users.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Simon Thum <simon.thum@gmx.de>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
|
|
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
|
|
Please no extension-specific macros for memory allocation.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Dan Nicholson <dbn.lists@gmail.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
InternalEvents shouldn't be used anywhere outside the X server itself. Split
up into events.h for opaque typedefs for the events needed by various
headers and eventstr.h for the actual struct definitions.
eventstr.h must only be included by code that requires internal events and
is not part of the SDK.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Reverts the following four patches:
feb757f384382c7782ceac55 "XKB: Sanitise vmods for redirected keys"
b5f49382fe48f0a762d9a15f "XKB: Sanitise ctrls action"
1bd7fd195d85681e722161f8 "XKB: Sanitise pointer actions"
61c508fa78aa08ea2666fde9 "XKB: Sanitise vmods in actions"
Strictly speaking, the structs used in the server are not part of the client
ABI. Practically, they are as we copy from the wire straight into the
structs. Changing the struct sizes breaks various wire/server conversions.
Even when the structs have the same size, some internal magic causes
conversions to fail. Visible by diffing the output files of:
setxkbmap -layout de; xkbcomp -xkb :0 busted.xkb
setxkbmap -layout de -print | xkbcomp -xkb - correct.xkb
Interestingly enough, busted.xkb is the working one although the output is
incorrect. Revert the four offending patches until the exact cause of this
breakage can be determined.
This patch restores functionality to Level3 modifiers.
X.Org Bug 19602 <http://bugs.freedesktop.org/show_bug.cgi?id=19602>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
I really don't know what the purpose of this variable is or was, aside from
potentially clobbering up our key state since there's a path where it may be
used uninitialised.
Also, this means that xkbi->prev_state is now accessible from the DIX with
meaningful data.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
|
|
|
|
Don't pass xEvent* and count through to processing, pass a single
InternalEvent.
Custom handlers are disabled for the time being. And for extra fun,
XKB's pointer motion emulation is disabled. But stick an error in there so
that we get reminded should we forget about it.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Note that this breaks DGA. Life is tough.
EnqueueEvent is a somewhat half-baked solution, we immediately drop back into
XI and store them. But it should in theory work.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Don't let the dcce be random data.
|
|
Before dropping down into the DIX, convert back into XI events. This is a
temporary solution only, until the DIX is capable of handling InternalEvents
anyway.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Turn two unsigned chars into one unsigned int for both vmods and the
vmod mask. As a bonus, remove broken unused accessor macro for setting
the vmods.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Turn four unsigned chars into one unsigned long.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Turn two unsigned chars into one int.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Modifiers get cleared by the XKB code when we drop down into core input
processing, so just delete the dead code path to simplify things a bit.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
We already have state fully stored within XKB, so instead of duplicating it,
just generate the values to send to clients when required.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
For some reason, XKB allows clients to set a global (!) flag that simply
turns lock keys into state no-ops. Ignore this flag.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Introduced with a85f0d6b98237d8a196de624207acf1983a1859a.
Reported by Thomas Jaeger.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
A grep on xorg/* revealed there's no consumer of this define.
Quote Alan Coopersmith:
"The consumer was in past versions of the headers now located
in proto/x11proto - for instance, in X11R6.0's xc/include/Xproto.h,
all the event definitions were only available if NEED_EVENTS were
defined, and all the reply definitions required NEED_REPLIES.
Looks like Xproto.h dropped them by X11R6.3, which didn't have
the #ifdef's anymore, so these are truly ancient now."
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
|
|
Save in a few special cases, _X_EXPORT should not be used in C source
files. Instead, it should be used in headers, and the proper C source
include that header. Some special cases are symbols that need to be
shared between modules, but not expected to be used by external drivers,
and symbols that are accessible via LoaderSymbol/dlopen.
This patch also adds conditionally some new sdk header files, depending
on extensions enabled. These files were added to match pattern for
other extensions/modules, that is, have the headers "deciding" symbol
visibility in the sdk. These headers are:
o Xext/panoramiXsrv.h, Xext/panoramiX.h
o fbpict.h (unconditionally)
o vidmodeproc.h
o mioverlay.h (unconditionally, used only by xaa)
o xfixes.h (unconditionally, symbols required by dri2)
LoaderSymbol and similar functions now don't have different prototypes,
in loaderProcs.h and xf86Module.h, so that both headers can be included,
without the need of defining IN_LOADER.
xf86NewInputDevice() device prototype readded to xf86Xinput.h, but
not exported (and with a comment about it).
|
|
The device's button down state array was changed to use DOWN_LENGTH and thus
bitflags for each button in cfcb3da7.
Update the DBSN events to copy this bit-wise state.
Update xkb and Xi to check for the bit flag instead of the array value.
Reported by ajax.
Signed-off-by: Peter Hutterer <peter.hutterer@redhat.com>
|
|
This is the biggest "visibility" patch. Instead of doing a "export"
symbol on demand, export everything in the sdk, so that if some module
fails due to an unresolved symbol, it is because it is using a symbol
not in the sdk.
Most exported symbols shouldn't really be made visible, neither
advertised in the sdk, as they are only used by a single shared object.
Symbols in the sdk (or referenced in sdk macros), but not defined
anywhere include:
XkbBuildCoreState()
XkbInitialMap
XkbXIUnsupported
XkbCheckActionVMods()
XkbSendCompatNotify()
XkbDDXFakePointerButton()
XkbDDXApplyConfig()
_XkbStrCaseCmp()
_XkbErrMessages[]
_XkbErrCode
_XkbErrLocation
_XkbErrData
XkbAccessXDetailText()
XkbNKNDetailMaskText()
XkbLookupGroupAndLevel()
XkbInitAtoms()
XkbGetOrderedDrawables()
XkbFreeOrderedDrawables()
XkbConvertXkbComponents()
XkbWriteXKBSemantics()
XkbWriteXKBLayout()
XkbWriteXKBKeymap()
XkbWriteXKBFile()
XkbWriteCFile()
XkbWriteXKMFile()
XkbWriteToServer()
XkbMergeFile()
XkmFindTOCEntry()
XkmReadFileSection()
XkmReadFileSectionName()
InitExtInput()
xf86CheckButton()
xf86SwitchCoreDevice()
RamDacSetGamma()
RamDacRestoreDACValues()
xf86Bpp
xf86ConfigPix24
xf86MouseCflags[]
xf86SupportedMouseTypes[]
xf86NumMouseTypes
xf86ChangeBusIndex()
xf86EntityEnter()
xf86EntityLeave()
xf86WrapperInit()
xf86RingBell()
xf86findOptionBoolean()
xf86debugListOptions()
LoadSubModuleLocal()
LoaderSymbolLocal()
getInt10Rec()
xf86CurrentScreen
xf86ReallocatePciResources()
xf86NewSerialNumber()
xf86RandRSetInitialMode()
fbCompositeSolidMask_nx1xn
fbCompositeSolidMask_nx8888x0565C
fbCompositeSolidMask_nx8888x8888C
fbCompositeSolidMask_nx8x0565
fbCompositeSolidMask_nx8x0888
fbCompositeSolidMask_nx8x8888
fbCompositeSrc_0565x0565
fbCompositeSrc_8888x0565
fbCompositeSrc_8888x0888
fbCompositeSrc_8888x8888
fbCompositeSrcAdd_1000x1000
fbCompositeSrcAdd_8000x8000
fbCompositeSrcAdd_8888x8888
fbGeneration
fbIn
fbOver
fbOver24
fbOverlayGeneration
fbRasterizeEdges
fbRestoreAreas
fbSaveAreas
composeFunctions
VBEBuildVbeModeList()
VBECalcVbeModeIndex()
TIramdac3030CalculateMNPForClock()
shadowBufPtr
shadowFindBuf()
miRRGetScreenInfo()
RRSetScreenConfig()
RRModePruneUnused()
PixmanImageFromPicture()
extern int miPointerGetMotionEvents()
miClipPicture()
miRasterizeTriangle()
fbPush1toN()
fbInitializeBackingStore()
ddxBeforeReset()
SetupSprite()
InitSprite()
DGADeliverEvent()
SPECIAL CASES
o defined as _X_INTERNAL
xf86NewInputDevice()
o defined as static
fbGCPrivateKey
fbOverlayScreenPrivateKey
fbScreenPrivateKey
fbWinPrivateKey
o defined in libXfont.so, but declared in xorg/dixfont.h
GetGlyphs()
QueryGlyphExtents()
QueryTextExtents()
ParseGlyphCachingMode()
InitGlyphCaching()
SetGlyphCachingMode()
|
|
When MouseKeys are activated, keyboard devices may generate fake mouse button
events through XKB. Let's get then running through the appropriate paths, i.e.
as XI events on the correct device.
To make matters more fun, ProcessOtherEvents drops events if the DIX device
state cannot be updated accordingly, i.e. all button events from keyboard
devices.
Hence we need to get the paired MD for the device in XkbDDXFakeDeviceButton,
and post the event through the paired MD (usually the VCP).
Removes now-unused ddxFakeBtn.c.
Note: this patch only half-arsedly fixed button events, motion events are a
more complicated matter.
|
|
TODO: static indices can be made just an int; some indices
can be combined.
|
|
device->button->down used to be a 32-byte bitmask with one bit for each
button. This has changed into a 256-byte array, with one byte assigned for
each button. Some of the callers were still using this array as a bitmask
however, this is fixed with this patch.
Thanks to Keith Packard for pointing this out. See also:
http://lists.freedesktop.org/archives/xorg/2008-June/036202.html
|
|
Conflicts:
Xext/EVI.c
Xext/appgroup.c
Xext/cup.c
Xext/mitmisc.c
Xext/sampleEVI.c
dix/window.c
|
|
X.Org Bug 15614 <http://bugs.freedesktop.org/show_bug.cgi?id=15614>
Signed-off-by: Peter Hutterer <peter@cs.unisa.edu.au>
|
|
Conflicts:
Xext/xevie.c
dix/dispatch.c
|
|
If input processing is frozen, only wrap realInputProc: don't smash
processInputProc as well. When input processing is thawed, pIP will be
rewrapped correctly.
This supersedes the previous workaround in 50e80c9.
Signed-off-by: Daniel Stone <daniel@fooishbar.org>
|
|
This merge reverts Magnus' device coorindate scaling changes. MPX core event
generation is very different, so we can't scale in GetPointerEvents.
Conflicts:
Xi/opendev.c
dix/devices.c
dix/dixfonts.c
dix/getevents.c
dix/resource.c
dix/window.c
hw/xfree86/common/xf86Xinput.c
mi/mipointer.c
xkb/ddxBeep.c
xkb/ddxCtrls.c
xkb/ddxKeyClick.c
xkb/ddxList.c
xkb/ddxLoad.c
xkb/xkb.c
xkb/xkbAccessX.c
xkb/xkbEvents.c
xkb/xkbInit.c
xkb/xkbPrKeyEv.c
xkb/xkbUtils.c
|
|
Sorry about the megacommit, but this touches on a lot of stuff.
Get rid of XkbFileInfo, which was pretty seriously redundant, and move the
only useful thing it had (defined) into XkbDescRec. defined will be removed
pretty soon anyway. Is the compat map pointer non-NULL? Then you have a
compat map, congratulations! Anyhow, I digress.
All functions that took an XkbFileInfoPtr now take an XkbDescPtr, _except_
XkmReadFile, which returns an XkbDescPtr *, because people want to deal in
XkbDescPtrs, not XkbDescRecs.
|
|
Conflicts:
XTrap/xtrapddmi.c
Xext/security.c
Xext/xprint.c
Xext/xtest.c
Xext/xvdisp.c
Xi/exevents.c
Xi/grabdevb.c
Xi/grabdevk.c
Xi/opendev.c
Xi/ungrdev.c
Xi/ungrdevb.c
Xi/ungrdevk.c
dix/cursor.c
dix/devices.c
dix/dixutils.c
dix/events.c
dix/getevents.c
dix/main.c
dix/window.c
hw/xfree86/ramdac/xf86Cursor.c
include/dix.h
include/input.h
include/inputstr.h
mi/midispcur.c
mi/miinitext.c
mi/misprite.c
render/animcur.c
xfixes/cursor.c
xkb/xkbAccessX.c
|