| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
If we present several pixmaps in advance for different msc, the later one
shouldn't cancel the previous ones.
This reverts a change made by commit
e6f5d9d7b7efdacea0f22f1808efca849bcede4c
Without this fix, vblank_mode=0 glxgears doesn't update
with the present fallback.
Signed-off-by: Axel Davy <axel.davy@ens.fr>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
So far PPC was big endian for sure. For ppc64le this is no longer
true.
Signed-off-by: Egbert Eich <eich@freedesktop.org>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
|
|
If a 2D application is started on top of a fullscreen 3D application, which
is flipping, then we need to stop flipping and restore the root window, and
possibly the flip window, to using the screen pixmap. Normally this would
be done as part of an unflip. However, in the case that there is a pending
flip there is no mechanism to abort so the unflip is deferred until the
pending flip completes. This provides a window of opportunity for the 2D
application to draw to the wrong pixmap.
Restore the screen pixmap at the point a pending flip is marked as aborted,
thus avoiding this issue.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Frank Binns <frank.binns@imgtec.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
Once the vblank is actually getting executed, it's lifetime is no
longer tied to the window, and so it shouldn't be controlled by window
destruction. In particular, if the vblank is queued for flip, it will
get stored in the flip_pending field, and will be correctly destroyed
when the flip completes.
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
It turns out putimage doesn't use the GC tile or stipple anyway, so
there's no need to do this.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
|
|
The max size of renderbuffers and texture often match by accident, but
as we always use textures, we should check for the right flag. Also
check for viewport size as this may be lower and we want to render to
almost every pixmap.
Signed-off-by: Markus Wick <markus@selfnet.de>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
|
|
With GL_TEXTURE_MIN_FILTER, we configure not to use mipmaps, but
there's no real way until GL_ARB_texture_storage to dictate whether
memory should be allocated for mipmap levels or not.
GL_TEXTURE_MAX_LEVEL is a stronger hint to the driver than the
filtering that we really don't want mipmap allocations. Stops VARM
wasting warnings from the nvidia driver.
Signed-off-by: Markus Wick <markus@selfnet.de>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
|
|
Now shows:
--with-xkb-bin-directory=DIR
Directory containing xkbcomp program (default:
${bindir})
Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
mieq.c:520:9: error: void function 'mieqProcessDeviceEvent' should not return a value [-Wreturn-type,Semantic Issue]
return 0;
^ ~
1 error generated.
Regression-from: 9fb08310b51b46736f3ca8dbc04efdf502420403
Found-by: Tinderbox
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
Once a device is disabled, it doesn't have a sprite pointer anymore. If an
event is still in the queue and processed after DisableDevice finished, a
dereference causes a crash. Example backtrace (crash forced by injecting an
event at the right time):
(EE) 0: /opt/xorg/bin/Xorg (OsSigHandler+0x3c) [0x48d334]
(EE) 1: /lib64/libpthread.so.0 (__restore_rt+0x0) [0x37fcc0f74f]
(EE) 2: /opt/xorg/bin/Xorg (mieqMoveToNewScreen+0x38) [0x609240]
(EE) 3: /opt/xorg/bin/Xorg (mieqProcessDeviceEvent+0xd4) [0x609389]
(EE) 4: /opt/xorg/bin/Xorg (mieqProcessInputEvents+0x206) [0x609720]
(EE) 5: /opt/xorg/bin/Xorg (ProcessInputEvents+0xd) [0x4aeb58]
(EE) 6: /opt/xorg/bin/Xorg (xf86VTSwitch+0x1a6) [0x4af457]
(EE) 7: /opt/xorg/bin/Xorg (xf86Wakeup+0x2bf) [0x4af0a7]
(EE) 8: /opt/xorg/bin/Xorg (WakeupHandler+0x83) [0x4445cb]
(EE) 9: /opt/xorg/bin/Xorg (WaitForSomething+0x3fe) [0x491bf6]
(EE) 10: /opt/xorg/bin/Xorg (Dispatch+0x97) [0x435748]
(EE) 11: /opt/xorg/bin/Xorg (dix_main+0x61d) [0x4438a9]
(EE) 12: /opt/xorg/bin/Xorg (main+0x28) [0x49ba28]
(EE) 13: /lib64/libc.so.6 (__libc_start_main+0xf5) [0x37fc821d65]
(EE) 14: /opt/xorg/bin/Xorg (_start+0x29) [0x425e69]
(EE) 15: ? (?+0x29) [0x29]
xf86VTSwitch() calls ProcessInputEvents() before disabling a device, and
DisableDevice() calls mieqProcessInputEvents() again when flushing touches and
button events. Between that and disabling the device (which causes new events
to be refused) there is a window where events may be triggered and enqueued.
On the next call to PIE that event is processed on a now defunct device,
causing the crash.
The simplest fix to this is to discard events from disabled devices. We flush
the queue often enough before disabling that when we get here, we really don't
care about the events from this device.
X.Org Bug 77884 <http://bugs.freedesktop.org/show_bug.cgi?id=77884>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reported-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Tested-by: Maarten Lankhorst <maarten.lankhorst@canonical.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
When a flip (or unflip) is pending and a flip request comes in, leave
it queued until the pending flip completes and then execute it.
This fixes a bug where an application submitting back-to-back
present_pixmap requests for sequential frames would alternate between
flipping and copying as the pending flip would cause the new
present_pixmap request to not use a flip.
Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Frank Binns <frank.binns@imgtec.com>
|
|
The initial state of the cursor is set to disabled but this was
never be re-disabled during X server reset. This meant any
application run after an X server reset would have the cursor
displayed even if it hadn't requested this to be the case.
Signed-off-by: Frank Binns <frank.binns@imgtec.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
The server is leaking a pixmap (created by CreateDefaultStipple()) on
reset. The leak is caused by some X Server graphics contexts not being
freed on reset by the machine independent cursor code in the server,
which in turn is caused by the cursor cleanup code
(miSpriteDeviceCursorCleanup()) not being called.
Ensures the DeviceCursorCleanup() function is called when the associated
input device is closed on server reset.
Signed-off-by: Frank Binns <frank.binns@imgtec.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
The new current cursor was being referenced twice, resulting in a
memory leak when the current server generation ended.
Signed-off-by: Frank Binns <frank.binns@imgtec.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
Call FreePixmap() instead of free() to destroy the screen pixmap in
fbCloseScreen().
Signed-off-by: Frank Binns <frank.binns@imgtec.com>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
This is so that drivers can do a runtime check that Present is available,
similar to existing runtime checks performed by the drivers for DRI.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
This is so that drivers can do a runtime check that DRI3 is available,
similar to existing runtime checks performed by the drivers for DRI and
DRI2.
v2: Only add DRI3 to the list if the module was actually built into the
server (Mark Kettenis).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mark Kettenis <mark.kettenis@xs4all.nl>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
|
|
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
|
|
To make X -configure work properly, the output of fixup_video_driver_list()
should be in order of preference. Otherwise, the config file may use
the incorrect driver for some devices.
In particular, the drivers that work for all (or many) devices need to be
last in the list. Since the modesetting driver works for many devices,
it needs to be considered a fallback driver.
Signed-off-by: Søren Sandmann <ssp@redhat.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
|
|
The easiest way to check for the version of an extension is to send the maximum
possible version numbers in the QueryVersion request. The X server overflows on
these as it assumes you will send a reasonable version number.
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
The explicit release requests were added in 1.3.0, don't try to build
against older.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
Commit f37a46913489397d8628ffe578c8d4ed50b6ca72 removed this from
xwin-config.h.in for some reason, but it is used.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
|
|
Update for __glXLastContext -> lastGLContext.
Signed-off-by: Jon TURNEY <jon.turney@dronecode.org.uk>
Reviewed-by: Colin Harrison <colin.harrison@virgin.net>
|
|
<rdar://problem/14205847>
http://xquartz.macosforge.org/trac/ticket/832
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
|
|
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
|
|
Signed-off-by: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
|
|
DontZap off is the default anyway, don't mention it specifically to avoid
confusion
X.Org Bug 71113 <http://bugs.freedesktop.org/show_bug.cgi?id=71113>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
X.Org Bug 71113 <http://bugs.freedesktop.org/show_bug.cgi?id=71113>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
The easiest way to check for the version of an extension is to send the maximum
possible version numbers in the QueryVersion request. The X server overflows on
these as it assumes you will send a reasonable version number.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
|
|
Mesa no longer supports rendering to anything less. GLX 1.2 requires
that the server advertise at least one GLX visual. GLX 1.3 and 1.4 are
more subtle: they require at least one fbconfig capable of window
rendering, and _also_ require that window-capable fbconfigs have a
non-zero value for the GLX_VISUAL_ID. In either case we should refuse
to init GLX if there's not at least one GL-capable visual on at least
one screen.
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
I've been seeing sporadic (anywhere from once every few days to 3-4
times a day) crashes and freezes in X. The problematic behaviour isn't
always the same, but I chose a particular incident to debug, and found
that X was segfaulting in updateMotionHistory, on line 575 of
dix/getevents.c.
After some further investigation, I found that the bug was being
triggered when a SIGIO was received in DeepCopyPointerClasses, between
the AllocValuatorClass call (line 540) and updating the to->valuator
pointer (line 545). AllocValuatorClass calls realloc() on to->valuator,
so between these lines, it's not guaranteed to point to allocated
memory.
It seems the SIGIO handler is calling updateMotionHistory, which is
reading the memory pointed to by to->valuator and getting a wrong value
for last_motion, which updates buff to point to wildly the wrong place
and thus generates a segfault when a memcpy() is done into buff.
I am attaching a patch which I've been running on that machine for the
past three days, and haven't yet observed any more crashing or freezing
behaviour. The patch simply calls OsBlockSIGIO while
DeepCopyDeviceClasses is in progress, as the state of the X server's
device data structures is not guaranteed to be in a consistent state
during that time.
Debian bug#744303 <https://bugs.debian.org/744303>
Signed-off-by: Julien Cristau <jcristau@debian.org>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
If we're smart enough to warn, we should be smart enough to just pass it
through to the right function. Worst case we lose some formatting specifiers
which pnprintf will complain about anyway. And in most cases it won't matter.
This requires renaming pnprintf to vpnprintf and changing the size_t to int to
be compatible with Xvscnprintf. pnprintf is internal only, the others are
exported API so we can't change them as easily.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
|
|
This has to run at initial CreateWindow time, at CreateScreenResources
the root window doesn't actually exist yet.
Tested-by: Michael Thayer <michael.thayer@oracle.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Michael Thayer <michael.thayer@oracle.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
v2: Fix another path spotted by keithp
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
Signed-off-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
Checking the iterating variable ("slave") against null can not detect if the
xorg_list_for_each_entry finished without break being invoked - slave variable
will be always non-null. This caused segfault whenever someone tried to use
DRI_PRIME with incorrect id while having at least one render offloading slave
configured.
Restructurize the GetScreenPrime to work as expected.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
Xorg server could be built for and run on Synopsys DesignWare ARC cores.
These changes are required for successful building and execution of the server.
Both little-endian and big-endian flavors of ARC cores are supported.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Acked-by: Adam Jackson <ajax@redhat.com>
Reviewed-by: Egbert Eich <eich@freedesktop.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
This quick makes the mouse behaviour more obvious (LMR buttons generate LMR
events) but goes against the manufacturer's intended defaults:
Top button - left click.
Wheel button - .middle click (e.g., for pan and rotate in CAD programs).
Middle button - right click.
Bottom button - back.
Thumb button - forward.
from http://www.evoluent.com/vm3.html
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
|
|
Slaving two outputs on a secondary GPU to a primary GPU testing
picked this up, in that we'd try to resize to the totally the
wrong thing, then as usual segfault in the rotation code.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Aaron Plattner <aplattner@nvidia.com>
|
|
Part of the _nf contract is that glamor will only return FALSE if
glamor has checked that UXA can actually map the pixmaps (UXA only
allocates the BO itself in the screen pixmap and DRI2 cases, and can't
map it otherwise). Fixes server segfaults zooming in and out of
libreoffice spreadsheets.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
This patch fixes some compile warnings that arise after
commit 7070ebeebaca1b51f8a2801989120784a1c374ae
(xfree86: add new key MatchSeat to xorg.conf sections "Device", "Screen", and "ServerLayout")
available at git repository
git://people.freedesktop.org/~whot/xserver for-keith
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
Disabling asserts is something the user gets to manage.
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
==26141== Invalid read of size 8
==26141== at 0x58FAEA: DeliverEmulatedMotionEvent (exevents.c:1484)
An InternalEvent is bigger than a DeviceEvent, thus copying one to the other
reads past the allocated boundary. Shouldn't have any real effect since we
shouldn't access anything past the DeviceEvent boundary if the event type is
correct.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
|
|
Introduced in
73698d41e41ce76bef2d9a90b46ac0c24ae148dd "Make XYToWindow a screen function"
Moving the code into miwindow.c changed the start of the loop from
RootWindow()->firstChild to DeepestSpriteWindow(). This function is only
supposed to be called from miXYToWindow which resets spriteTraceGood to 1,
thus DeepestSpriteWindow() is always the root window anyway.
What got dropped was the firstChild as the first window to handle, so we may
end up with the root window twice in the sprite trace.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Keith Packard <keithp@keithp.com>
|
|
Skipping two unreviewed patches; will mark them reviewed and cherry pick
|
