From 70c37bf97f2a91accba76080db69144f3b69f736 Mon Sep 17 00:00:00 2001 From: Bjørn Mork Date: Mon, 28 Jan 2013 23:51:28 +0000 Subject: net: usbnet: prevent buggy devices from killing us MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit A device sending 0 length frames as fast as it can has been observed killing the host system due to the resulting memory pressure. Temporarily disable RX skb allocation and URB submission when the current error ratio is high, preventing us from trying to allocate an infinite number of skbs. Reenable as soon as we are finished processing the done queue, allowing the device to continue working after short error bursts. Signed-off-by: Bjørn Mork Acked-by: Oliver Neukum Signed-off-by: David S. Miller --- drivers/net/usb/usbnet.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) (limited to 'drivers/net/usb') diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index f34b2ebee815..977837725726 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -380,6 +380,12 @@ static int rx_submit (struct usbnet *dev, struct urb *urb, gfp_t flags) unsigned long lockflags; size_t size = dev->rx_urb_size; + /* prevent rx skb allocation when error ratio is high */ + if (test_bit(EVENT_RX_KILL, &dev->flags)) { + usb_free_urb(urb); + return -ENOLINK; + } + skb = __netdev_alloc_skb_ip_align(dev->net, size, flags); if (!skb) { netif_dbg(dev, rx_err, dev->net, "no rx skb\n"); @@ -539,6 +545,17 @@ block: break; } + /* stop rx if packet error rate is high */ + if (++dev->pkt_cnt > 30) { + dev->pkt_cnt = 0; + dev->pkt_err = 0; + } else { + if (state == rx_cleanup) + dev->pkt_err++; + if (dev->pkt_err > 20) + set_bit(EVENT_RX_KILL, &dev->flags); + } + state = defer_bh(dev, skb, &dev->rxq, state); if (urb) { @@ -791,6 +808,11 @@ int usbnet_open (struct net_device *net) (dev->driver_info->flags & FLAG_FRAMING_AX) ? "ASIX" : "simple"); + /* reset rx error state */ + dev->pkt_cnt = 0; + dev->pkt_err = 0; + clear_bit(EVENT_RX_KILL, &dev->flags); + // delay posting reads until we're fully open tasklet_schedule (&dev->bh); if (info->manage_power) { @@ -1254,6 +1276,9 @@ static void usbnet_bh (unsigned long param) } } + /* restart RX again after disabling due to high error rate */ + clear_bit(EVENT_RX_KILL, &dev->flags); + // waiting for all pending urbs to complete? if (dev->wait) { if ((dev->txq.qlen + dev->rxq.qlen + dev->done.qlen) == 0) { -- cgit v1.2.3 From 3d6d7ab5881b1d4431529410b949ba2e946f3b0f Mon Sep 17 00:00:00 2001 From: Daniele Palmas Date: Wed, 30 Jan 2013 02:47:06 +0000 Subject: NET: qmi_wwan: add Telit LE920 support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add VID, PID and fixed interface for Telit LE920 Signed-off-by: Daniele Palmas Acked-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/net/usb') diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 575a5839ee34..2ca7f8ea2dca 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -461,6 +461,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x1199, 0x901c, 8)}, /* Sierra Wireless EM7700 */ {QMI_FIXED_INTF(0x1bbb, 0x011e, 4)}, /* Telekom Speedstick LTE II (Alcatel One Touch L100V LTE) */ {QMI_FIXED_INTF(0x2357, 0x0201, 4)}, /* TP-LINK HSUPA Modem MA180 */ + {QMI_FIXED_INTF(0x1bc7, 0x1200, 5)}, /* Telit LE920 */ /* 4. Gobi 1000 devices */ {QMI_GOBI1K_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */ -- cgit v1.2.3 From bf414b369f158bb527f9f29174ada815f961b44c Mon Sep 17 00:00:00 2001 From: Bjørn Mork Date: Thu, 31 Jan 2013 08:36:05 +0000 Subject: net: usbnet: fix tx_dropped statistics MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It is normal for minidrivers accumulating frames to return NULL from their tx_fixup function. We do not want to count this as a drop, or log any debug messages. A different exit path is therefore chosen for such drivers, skipping the debug message and the tx_dropped increment. The test for accumulating drivers was however completely bogus, making the exit path selection depend on whether the user had enabled tx_err logging or not. This would arbitrarily mess up accounting for both accumulating and non-accumulating minidrivers, and would result in unwanted debug messages for the accumulating drivers. Fix by testing for FLAG_MULTI_PACKET instead, which probably was the intention from the beginning. This usage match the documented behaviour of this flag: Indicates to usbnet, that USB driver accumulates multiple IP packets. Affects statistic (counters) and short packet handling. Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/usbnet.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'drivers/net/usb') diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index 977837725726..5e33606c1366 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -1125,13 +1125,11 @@ netdev_tx_t usbnet_start_xmit (struct sk_buff *skb, if (info->tx_fixup) { skb = info->tx_fixup (dev, skb, GFP_ATOMIC); if (!skb) { - if (netif_msg_tx_err(dev)) { - netif_dbg(dev, tx_err, dev->net, "can't tx_fixup skb\n"); - goto drop; - } else { - /* cdc_ncm collected packet; waits for more */ + /* packet collected; minidriver waiting for more */ + if (info->flags & FLAG_MULTI_PACKET) goto not_drop; - } + netif_dbg(dev, tx_err, dev->net, "can't tx_fixup skb\n"); + goto drop; } } length = skb->len; -- cgit v1.2.3 From 96316c595697ae9a2a90badd6f00035f2f384773 Mon Sep 17 00:00:00 2001 From: Bjørn Mork Date: Wed, 6 Feb 2013 05:21:53 +0000 Subject: net: cdc_ncm: add another Huawei vendor specific device MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Adding a new vendor specific class/subclass/protocol combination for CDC NCM devices based on information from a GPLed out-of-tree driver from Huawei. Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/cdc_ncm.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/net/usb') diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c index 9197b2c72ca3..00d3b2d37828 100644 --- a/drivers/net/usb/cdc_ncm.c +++ b/drivers/net/usb/cdc_ncm.c @@ -1215,6 +1215,9 @@ static const struct usb_device_id cdc_devs[] = { { USB_VENDOR_AND_INTERFACE_INFO(0x12d1, 0xff, 0x02, 0x46), .driver_info = (unsigned long)&wwan_info, }, + { USB_VENDOR_AND_INTERFACE_INFO(0x12d1, 0xff, 0x02, 0x76), + .driver_info = (unsigned long)&wwan_info, + }, /* Infineon(now Intel) HSPA Modem platform */ { USB_DEVICE_AND_INTERFACE_INFO(0x1519, 0x0443, -- cgit v1.2.3 From e21b9d031fa184632c373eedc12e3c296e1aa65b Mon Sep 17 00:00:00 2001 From: Bjørn Mork Date: Wed, 6 Feb 2013 05:22:08 +0000 Subject: net: qmi_wwan: add more Huawei devices, including E320 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Adding new class/subclass/protocol combinations based on the GPLed out-of-tree Huawei driver. One of these has already appeared on a device labelled as "E320". Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/qmi_wwan.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers/net/usb') diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 2ca7f8ea2dca..c8e05e27f38c 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -351,6 +351,10 @@ static const struct usb_device_id products[] = { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 57), .driver_info = (unsigned long)&qmi_wwan_info, }, + { /* HUAWEI_INTERFACE_NDIS_CONTROL_QUALCOMM */ + USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 0x01, 0x69), + .driver_info = (unsigned long)&qmi_wwan_info, + }, /* 2. Combined interface devices matching on class+protocol */ { /* Huawei E367 and possibly others in "Windows mode" */ @@ -361,6 +365,14 @@ static const struct usb_device_id products[] = { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 17), .driver_info = (unsigned long)&qmi_wwan_info, }, + { /* HUAWEI_NDIS_SINGLE_INTERFACE_VDF */ + USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 0x01, 0x37), + .driver_info = (unsigned long)&qmi_wwan_info, + }, + { /* HUAWEI_INTERFACE_NDIS_HW_QUALCOMM */ + USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 0x01, 0x67), + .driver_info = (unsigned long)&qmi_wwan_info, + }, { /* Pantech UML290, P4200 and more */ USB_VENDOR_AND_INTERFACE_INFO(0x106c, USB_CLASS_VENDOR_SPEC, 0xf0, 0xff), .driver_info = (unsigned long)&qmi_wwan_info, -- cgit v1.2.3