summaryrefslogtreecommitdiff
path: root/sound/pci/hda/patch_ca0132.c
AgeCommit message (Collapse)AuthorFilesLines
2015-05-29ALSA: hda - Set patch_ops before calling auto-parserTakashi Iwai1-4/+4
... so that the parser code can overwrite some optional ops. For Realtek and others, it can be set solely in the spec allocator, so it results in a good code cleanup, too. With this change, we can finally remove the local stream_pm setup and rely on the generic parser's automatic setting. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-05-19ALSA: hda/ca0132: support for Alienware 15 Creative Sound Core3D-EXGabriele Martino1-26/+92
This patch adds quirks detection to the Creative CA0132 codec, and the quirk for Alienware 15 (2015). Some quirks may need different pin configuration, so the relevant compile-time configuration has been removed. The pin configuration and related initialization verbs are generated at runtime instead, in ca0132_config() and ca0132_prepare_verbs(). Signed-off-by: Gabriele Martino <g.martino@gmx.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-04-16ALSA: hda - Move PCM format and rate handling code to core libraryTakashi Iwai1-5/+2
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-04-08ALSA: hda - Work around races of power up/down with runtime PMTakashi Iwai1-6/+6
Currently, snd_hdac_power_up()/down() helpers checks whether the codec is being in pm (suspend/resume), and skips the call of runtime get/put during it. This is needed as there are lots of power up/down sequences called in the paths that are also used in the PM itself. An example is found in hda_codec.c::codec_exec_verb(), where this can power up the codec while it may be called again in its power up sequence, too. The above works in most cases, but sometimes we really want to wait for the real power up. For example, the control element get/put may want explicit power up so that the value change is assured to reach to the hardware. Using the current snd_hdac_power_up(), however, results in a race, e.g. when it's called during the runtime suspend is being performed. In the worst case, as found in patch_ca0132.c, it can even lead to the deadlock because the code assumes the power up while it was skipped due to the check above. For dealing with such cases, this patch makes snd_hdac_power_up() and _down() to two variants: with and without in_pm flag check. The version with pm flag check is named as snd_hdac_power_up_pm() while the version without pm flag check is still kept as snd_hdac_power_up(). (Just because the usage of the former is fewer.) Then finally, the patch replaces each call potentially done in PM with the new _pm() variant. In theory, we can implement a unified version -- if we can distinguish the current context whether it's in the pm path. But such an implementation is cumbersome, so leave the code like this a bit messy way for now... Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=96271 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-23ALSA: hda - Move a part of hda_codec stuff into hdac_deviceTakashi Iwai1-5/+1
Now some codes and functionalities of hda_codec struct are moved to hdac_device struct. A few basic attributes like the codec address, vendor ID number, FG numbers, etc are moved to hdac_device, and they are accessed like codec->core.addr. The basic verb exec functions are moved, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-03ALSA: hda - Use standard workqueue for unsol and jack eventsTakashi Iwai1-2/+1
The events that are handled by HD-audio drivers are no frequent and urgent ones, so we can use the standard workqueue without any problem nowadays. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-03ALSA: hda - Allocate hda_pcm objects dynamicallyTakashi Iwai1-16/+13
So far, the hda_codec object kept the hda_pcm list in an array, and the codec driver was expected to assign the array. However, this makes the object life cycle management harder, because the assigned array is freed at the codec driver detach while it might be still accessed by the opened streams. In this patch, we allocate each hda_pcm object dynamically and manage it as a linked list. Each object has a kref refcount, and both the codec driver binder and the PCM open/close touches it, so that the object won't be freed while in use. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-03-03ALSA: hda - Add card field to hda_codec structTakashi Iwai1-1/+1
Allow the codec object to have an individual card pointer. Not only this simplifies the redirections in many places, also this will allow us to make each codec assigned to a different card object. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2015-02-23ALSA: hda - Bind codecs via standard busTakashi Iwai1-14/+2
Now we create the standard HD-audio bus (/sys/bus/hdaudio), and bind the codec driver with the codec device over there. This is the first step of the whole transition so that the changes to each codec driver are kept as minimal as possible. Each codec driver needs to register hda_codec_driver struct containing the currently existing preset via the new helper macro module_hda_codec_driver(). The old hda_codec_preset_list is replaced with this infrastructure. The generic parsers (for HDMI and other) are also included in the preset with the special IDs to bind uniquely. In HD-audio core side, the device binding code is split to hda_bind.c. It provides the snd_hda_bus_type implementation to match the codec driver with the given codec vendor ID. It also manages the module auto-loading by itself like before: when the matching isn't found, it tries to probe the corresponding codec modules, and finally falls back to the generic drivers. (The special ID mentioned above is set at this stage.) The only visible change to outside is that the hdaudio sysfs entry now appears in /sys/bus/devices, not as a sound class device. More works to move the suspend/resume and remove ops will be (hopefully) done in later patches. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-11ALSA: hda - Fix kerneldoc errors in patch_ca0132.cTakashi Iwai1-5/+6
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-09-16ALSA: hda - Use standard hda_jack infrastructure for CA0132 driverTakashi Iwai1-42/+34
For its headphone, mic and DSP responses, we can use the standard hda_jack infrastructure in CA0132 driver, too. The only point to handle carefully is the delayed headphone jack handling. It tries to react after a certain delay. Here we use the existing block_report flag in hda_jack_tbl (that was implemented for HDMI). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-09-11ALSA: hda - Get rid of action field from struct hda_jack_tblTakashi Iwai1-7/+9
The action value assigned to each hda_jack_tbl entry is mostly superfluous. The actually used values are either the widget NID or a value specific to the callback. The former case can be simply replaced by a reference to widget NID itself. The only place doing the latter is STAC/IDT codec driver for the powermap handling. But, the code doesn't need to check the action field at all -- the function jack_update_power() is called either with a specific pin or with NULL. So the check of jack->action can be removed completely there, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-08-10ALSA: hda/ca0132 - Don't try loading firmware at resume when already failedTakashi Iwai1-1/+6
CA0132 driver tries to reload the firmware at resume. Usually this works since the firmware loader core caches the firmware contents by itself. However, if the driver failed to load the firmwares (e.g. missing files), reloading the firmware at resume goes through the actual file loading code path, and triggers a kernel WARNING like: WARNING: CPU: 10 PID:11371 at drivers/base/firmware_class.c:1105 _request_firmware+0x9ab/0x9d0() For avoiding this situation, this patch makes CA0132 skipping the f/w loading at resume when it failed at probe time. Reported-and-tested-by: Janek Kozicki <cosurgi@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-06-25ALSA: hda - Kill the rest of snd_print*() usagesTakashi Iwai1-3/+3
Pass the codec object so that we can replace all the rest of snd_print*() usages with the proper device-specific print helpers. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-25ALSA: hda - Replace with standard printkTakashi Iwai1-105/+103
Use dev_err() and co for messages from HD-audio controller and codec drivers. The codec drivers are mostly bound with codec objects, so some helper macros, codec_err(), codec_info(), etc, are provided. They merely wrap the corresponding dev_xxx(). There are a few places still calling snd_printk() and its variants as they are called without the codec or device context. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-25Merge branch 'for-linus' into HEADTakashi Iwai1-61/+7
2014-02-19ALSA: hda/ca0132 - Fix recording from mode id 0x8Hsin-Yu Chao1-3/+1
Incorrect ADC is picked in ca0132_capture_pcm_prepare(), where it assumes multiple streams while there is one stream per ADC. Note that ca0132_capture_pcm_cleanup() already does the right thing. The Chromebook Pixel has a microphone under the keyboard that is attached to node id 0x8. Before this fix, recording would always go to the main internal mic (node id 0x7). Signed-off-by: Hsin-Yu Chao <hychao@chromium.org> Reviewed-by: Dylan Reid <dgreid@chromium.org> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-19ALSA: hda/ca0132 - setup/cleanup streamsHsin-Yu Chao1-59/+7
When a HDMI stream is opened with the same stream tag as a following opened stream to ca0132, audio will be heard from two ports simultaneously. Fix this issue by change to use snd_hda_codec_setup_stream and snd_hda_codec_cleanup_stream instead, so that an inactive stream can be marked as 'dirty' when found with a conflict stream tag, and then get purified. Signed-off-by: Hsin-Yu Chao <hychao@chromium.org> Reviewed-by: Chih-Chung Chang <chihchung@chromium.org> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-02-15ALSA: hda - Remove superfluous inclusion of linux/pci.hTakashi Iwai1-1/+0
Some codec drivers still have it since using PCI_VENDOR_ID_*. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-09-13ALSA: hda/ca0132: Staticize codec_send_commandSachin Kamat1-1/+1
'codec_send_command' is used only in this file. Make it static. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-06-28ALSA: Replace the magic number 44 with constTakashi Iwai1-4/+4
The char arrays with size 44 are for the name string of snd_ctl_elem_id. Define the constant and replace the raw numbers with it for clarifying better. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-05ALSA: hda/ca0132 - Update latency based on DSP state.Dylan Reid1-2/+53
The DSP in the CA0132 codec adds a variable latency to audio depending on what processing is being done. Add a new patch op to return that latency for capture and playback streams. The latency is determined by which blocks are enabled and knowing how much latency is added by each block. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-02ALSA: hda/ca0132 - Delay HP amp turnon.Chih-Chung Chang1-4/+23
Turing on the headphone amp interferes with the impedance measurement used to detect a TRRS style headset microphone. Delay the HP turn on until 500ms after the jack is detected, allowing the mic detection state machine to run to completion. Signed-off-by: Chih-Chung Chang <chihchung@chromium.org> Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-15ALSA: hda/ca0132 - Remove extra setting of dsp_state.Dylan Reid1-9/+6
spec->dsp_state is initialized to DSP_DOWNLOAD_INIT, no need to reset and check it in ca0132_download_dsp(). Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-15ALSA: hda/ca0132 - Check download state of DSP.Dylan Reid1-2/+3
Instead of using the dspload_is_loaded() function, check the dsp_state that is kept in the spec. The dspload_is_loaded() function returns true if the DSP transfer was never started. This false-positive leads to multiple second delays when ca0132_setup_efaults() times out on each write. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-15ALSA: hda/ca0132 - Check if dspload_image succeeded.Dylan Reid1-2/+6
If dspload_image() fails, it was ignored and dspload_wait_loaded() was still called. dsp_loaded should never be set to true in this case, skip it. The check in dspload_wait_loaded() return true if the DSP is loaded or if it never started. Signed-off-by: Dylan Reid <dgreid@chromium.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-07ALSA: hda/ca0132 - Avoid division by zero in dspxfr_one_seg()Xi Wang1-2/+6
Move the zero check `hda_frame_size_words == 0' before the modulus `buffer_size_words % hda_frame_size_words'. Also remove the redundant null check `buffer_addx == NULL'. Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-12ALSA: hda/ca0132 - Add missing \n to debug printsTakashi Iwai1-75/+75
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-12ALSA: hda/ca0132 - Fix type of INVALID_CHIP_ADDRESSTakashi Iwai1-2/+2
The chip address is 32bit long but INVALID_CHIP_ADDRESS is defined as an unsigned long. This makes dsp_chip_to_dsp_addx() misbehaving on 64bit architectures. Fix the INVALID_CHIP_ADDRESS definition to be 32bit. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-11ALSA: hda/ca0132 - Slight optimization for build with DSPTakashi Iwai1-0/+4
This reduces the resultant binary size. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-10ALSA: hda - Fix memory leak and error handling in CA0132 DSP loaderTakashi Iwai1-3/+7
This patch fixes a few obvious bugs in DSP loader stuff: - Fix possible memory leaks in the error path - Avoid double-free calls in dma_reset() - Properly set/unset WC bits for DMA buffers - Add missing error status checks Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-10ALSA: CA0132: Improve the DSP transfer timeout calculationsIan Minett1-16/+25
Base the DSP firmware transfer and communication timeouts on jiffy values. Signed-off-by: Ian Minett <ian_minett@creativelabs.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-07ALSA: hda - Fix misc compile warnings in patch_ca0132.cTakashi Iwai1-8/+6
sound/pci/hda/patch_ca0132.c: In function ‘ca0132_is_vnode_effective’: sound/pci/hda/patch_ca0132.c:3331:15: warning: ‘nid’ may be used uninitialized in this function [-Wmaybe-uninitialized] sound/pci/hda/patch_ca0132.c:4345:13: warning: ‘ca0132_download_dsp’ defined but not used [-Wunused-function] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-02-04ALSA: hda - Add new Kconfig CONFIG_SND_HDA_CODEC_CA0132_DSPTakashi Iwai1-2/+2
... to be less confusing for the update path. This new kconfig will choose CONFIG_SND_HDA_DSP_LOADER, which is basically a device-independent feature in hda_intel.c. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-16ALSA: hda/ca0132 - Make some symbols staticTakashi Iwai1-2/+2
sound/pci/hda/patch_ca0132.c:387:19: sparse: symbol 'ca0132_voicefx' was not declared. Should it be static? Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-15ALSA: hda/ca0132 - Fix a wrong comma in snd_printdd() callTakashi Iwai1-1/+1
sound/pci/hda/patch_ca0132.c: In function ‘ca0132_effects_set’: sound/pci/hda/patch_ca0132.c:3391:2: warning: too many arguments for format [-Wformat-extra-args] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-15ALSA: hda/ca0132 - Declare firmware only when really builtTakashi Iwai1-0/+2
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-15ALSA: hda/ca0132 - Fix possible invalid DMA channel deallocationTakashi Iwai1-3/+3
... in the error path in dspxfr_image(). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-15ALSA: hda/ca0132 - Fix possible NULL dereferenceTakashi Iwai1-6/+4
Spotted by smatch, sound/pci/hda/patch_ca0132.c:1950 dspxfr_image() error: potential null dereference 'dma_engine'. (kzalloc returns null) sound/pci/hda/patch_ca0132.c:1950 dspxfr_image() error: we previously assumed 'dma_engine' could be null (see line 1857) Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-15ALSA: hda/ca0132 - Fix another smatch warningTakashi Iwai1-1/+1
sound/pci/hda/patch_ca0132.c:1781 dspxfr_one_seg() info: why not propagate 'status' from dsp_dma_stop() instead of (-5)? Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-15ALSA: hda/ca0132 - Fix superfluous unsigned checkTakashi Iwai1-1/+1
Fix a warning by smatch, sound/pci/hda/patch_ca0132.c:714 dspio_send() warn: always true condition '(res >= 0) => (0-u32max >= 0)' Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-15ALSA: hda/ca0132 - Use snd_hda_set_pin_ctl() helper againTakashi Iwai1-16/+10
The recent update of ca0132 driver replaced the pinctl setup to the direct write via snd_hda_codec_write() again. This should be covered by snd_hda_set_pin_ctl() to be safer. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-15Revert "ALSA: hda - Add firmware caching to CA0132 codec"Takashi Iwai1-22/+6
This reverts commit c3b4eea26208b8e247ece9d3a9ec8b2eab48c464. Since the recent firmware loader code supports caching at S3/S4 by itself, we don't have to handle f/w caching in the driver. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-15ALSA: hda/ca0132: Fix potential init errors and update module descriptionIan Minett1-6/+8
Handle a potential dma_engine alloc error and fix the possible use of an uninitialized status variable in dspxfr_one_seg(). Also correct the initial sampling rate for Mic 1. Update the module description. Signed-off-by: Ian Minett <ian_minett@creativelabs.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-15ALSA: hda/ca0132: Shuffle to group together related codeIan Minett1-76/+76
Signed-off-by: Ian Minett <ian_minett@creativelabs.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-15ALSA: hda/ca0132: Code shuffle to group similar functions.Ian Minett1-187/+188
Signed-off-by: Ian Minett <ian_minett@creativelabs.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-15ALSA: hda/ca0132: Add tuning controlsIan Minett1-0/+289
This patch adds the controls used for tuning the DSP effects. Signed-off-by: Ian Minett <ian_minett@creativelabs.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-15ALSA: hda/ca0132: Add unsol handler for DSP and jack detectionIan Minett1-0/+142
This patch adds the unsolicited response handler for incoming DSP responses and jack detection reporting, and routines for reading the incoming DSP response. Signed-off-by: Ian Minett <ian_minett@creativelabs.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-15ALSA: hda/ca0132: Add PCM enhancementsIan Minett1-13/+118
Remove the playback PCM open callback. PCM stream setup and cleanup functions are added for use by PCM callbacks. Delay stream cleanup if effects are on, to allow time for any effects tail to finish. Add the analog capture PCM callbacks. Change the max channels of analog playback to 6. Add two new PCMs: AMic2 and What-U-Hear. Signed-off-by: Ian Minett <ian_minett@creativelabs.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-01-15ALSA: hda/ca0132: Add DSP mixer controls and helpersIan Minett1-288/+544
This patch adds the kcontrols for the DSP effects, playback and recording source selection. ca0132_is_vnode_effective() checks whether virtual node settings have taken effect. The control change helpers ca0132_pe_switch_set(), ca0132_voicefx_set() and ca0132_cvoice_switch_set() are added to toggle playback / capture DSP effects, ca0132_voicefx_info(), _get() and _put() are added for input path DSP effect value access. The volume helpers are updated to volume_info(), _get() and _set() to use the virtual nodes. The redundant headphone and speaker switches and ct_extension function are removed. Signed-off-by: Ian Minett <ian_minett@creativelabs.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-18 08:33:29 +0000