| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull networking updates from David Miller:
"Highlights:
1) Support more Realtek wireless chips, from Jes Sorenson.
2) New BPF types for per-cpu hash and arrap maps, from Alexei
Starovoitov.
3) Make several TCP sysctls per-namespace, from Nikolay Borisov.
4) Allow the use of SO_REUSEPORT in order to do per-thread processing
of incoming TCP/UDP connections. The muxing can be done using a
BPF program which hashes the incoming packet. From Craig Gallek.
5) Add a multiplexer for TCP streams, to provide a messaged based
interface. BPF programs can be used to determine the message
boundaries. From Tom Herbert.
6) Add 802.1AE MACSEC support, from Sabrina Dubroca.
7) Avoid factorial complexity when taking down an inetdev interface
with lots of configured addresses. We were doing things like
traversing the entire address less for each address removed, and
flushing the entire netfilter conntrack table for every address as
well.
8) Add and use SKB bulk free infrastructure, from Jesper Brouer.
9) Allow offloading u32 classifiers to hardware, and implement for
ixgbe, from John Fastabend.
10) Allow configuring IRQ coalescing parameters on a per-queue basis,
from Kan Liang.
11) Extend ethtool so that larger link mode masks can be supported.
From David Decotigny.
12) Introduce devlink, which can be used to configure port link types
(ethernet vs Infiniband, etc.), port splitting, and switch device
level attributes as a whole. From Jiri Pirko.
13) Hardware offload support for flower classifiers, from Amir Vadai.
14) Add "Local Checksum Offload". Basically, for a tunneled packet
the checksum of the outer header is 'constant' (because with the
checksum field filled into the inner protocol header, the payload
of the outer frame checksums to 'zero'), and we can take advantage
of that in various ways. From Edward Cree"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1548 commits)
bonding: fix bond_get_stats()
net: bcmgenet: fix dma api length mismatch
net/mlx4_core: Fix backward compatibility on VFs
phy: mdio-thunder: Fix some Kconfig typos
lan78xx: add ndo_get_stats64
lan78xx: handle statistics counter rollover
RDS: TCP: Remove unused constant
RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket
net: smc911x: convert pxa dma to dmaengine
team: remove duplicate set of flag IFF_MULTICAST
bonding: remove duplicate set of flag IFF_MULTICAST
net: fix a comment typo
ethernet: micrel: fix some error codes
ip_tunnels, bpf: define IP_TUNNEL_OPTS_MAX and use it
bpf, dst: add and use dst_tclassid helper
bpf: make skb->tc_classid also readable
net: mvneta: bm: clarify dependencies
cls_bpf: reset class and reuse major in da
ldmvsw: Checkpatch sunvnet.c and sunvnet_common.c
ldmvsw: Add ldmvsw.c driver code
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI updates from Rafael Wysocki:
"This time the majority of changes go into cpufreq and they are
significant.
First off, the way CPU frequency updates are triggered is different
now. Instead of having to set up and manage a deferrable timer for
each CPU in the system to evaluate and possibly change its frequency
periodically, cpufreq governors set up callbacks to be invoked by the
scheduler on a regular basis (basically on utilization updates). The
"old" governors, "ondemand" and "conservative", still do all of their
work in process context (although that is triggered by the scheduler
now), but intel_pstate does it all in the callback invoked by the
scheduler with no need for any additional asynchronous processing.
Of course, this eliminates the overhead related to the management of
all those timers, but also it allows the cpufreq governor code to be
simplified quite a bit. On top of that, the common code and data
structures used by the "ondemand" and "conservative" governors are
cleaned up and made more straightforward and some long-standing and
quite annoying problems are addressed. In particular, the handling of
governor sysfs attributes is modified and the related locking becomes
more fine grained which allows some concurrency problems to be avoided
(particularly deadlocks with the core cpufreq code).
In principle, the new mechanism for triggering frequency updates
allows utilization information to be passed from the scheduler to
cpufreq. Although the current code doesn't make use of it, in the
works is a new cpufreq governor that will make decisions based on the
scheduler's utilization data. That should allow the scheduler and
cpufreq to work more closely together in the long run.
In addition to the core and governor changes, cpufreq drivers are
updated too. Fixes and optimizations go into intel_pstate, the
cpufreq-dt driver is updated on top of some modification in the
Operating Performance Points (OPP) framework and there are fixes and
other updates in the powernv cpufreq driver.
Apart from the cpufreq updates there is some new ACPICA material,
including a fix for a problem introduced by previous ACPICA updates,
and some less significant changes in the ACPI code, like CPPC code
optimizations, ACPI processor driver cleanups and support for loading
ACPI tables from initrd.
Also updated are the generic power domains framework, the Intel RAPL
power capping driver and the turbostat utility and we have a bunch of
traditional assorted fixes and cleanups.
Specifics:
- Redesign of cpufreq governors and the intel_pstate driver to make
them use callbacks invoked by the scheduler to trigger CPU
frequency evaluation instead of using per-CPU deferrable timers for
that purpose (Rafael Wysocki).
- Reorganization and cleanup of cpufreq governor code to make it more
straightforward and fix some concurrency problems in it (Rafael
Wysocki, Viresh Kumar).
- Cleanup and improvements of locking in the cpufreq core (Viresh
Kumar).
- Assorted cleanups in the cpufreq core (Rafael Wysocki, Viresh
Kumar, Eric Biggers).
- intel_pstate driver updates including fixes, optimizations and a
modification to make it enable enable hardware-coordinated P-state
selection (HWP) by default if supported by the processor (Philippe
Longepe, Srinivas Pandruvada, Rafael Wysocki, Viresh Kumar, Felipe
Franciosi).
- Operating Performance Points (OPP) framework updates to improve its
handling of voltage regulators and device clocks and updates of the
cpufreq-dt driver on top of that (Viresh Kumar, Jon Hunter).
- Updates of the powernv cpufreq driver to fix initialization and
cleanup problems in it and correct its worker thread handling with
respect to CPU offline, new powernv_throttle tracepoint (Shilpasri
Bhat).
- ACPI cpufreq driver optimization and cleanup (Rafael Wysocki).
- ACPICA updates including one fix for a regression introduced by
previos changes in the ACPICA code (Bob Moore, Lv Zheng, David Box,
Colin Ian King).
- Support for installing ACPI tables from initrd (Lv Zheng).
- Optimizations of the ACPI CPPC code (Prashanth Prakash, Ashwin
Chaugule).
- Support for _HID(ACPI0010) devices (ACPI processor containers) and
ACPI processor driver cleanups (Sudeep Holla).
- Support for ACPI-based enumeration of the AMBA bus (Graeme Gregory,
Aleksey Makarov).
- Modification of the ACPI PCI IRQ management code to make it treat
255 in the Interrupt Line register as "not connected" on x86 (as
per the specification) and avoid attempts to use that value as a
valid interrupt vector (Chen Fan).
- ACPI APEI fixes related to resource leaks (Josh Hunt).
- Removal of modularity from a few ACPI drivers (BGRT, GHES,
intel_pmic_crc) that cannot be built as modules in practice (Paul
Gortmaker).
- PNP framework update to make it treat ACPI_RESOURCE_TYPE_SERIAL_BUS
as a valid resource type (Harb Abdulhamid).
- New device ID (future AMD I2C controller) in the ACPI driver for
AMD SoCs (APD) and in the designware I2C driver (Xiangliang Yu).
- Assorted ACPI cleanups (Colin Ian King, Kaiyen Chang, Oleg Drokin).
- cpuidle menu governor optimization to avoid a square root
computation in it (Rasmus Villemoes).
- Fix for potential use-after-free in the generic device properties
framework (Heikki Krogerus).
- Updates of the generic power domains (genpd) framework including
support for multiple power states of a domain, fixes and debugfs
output improvements (Axel Haslam, Jon Hunter, Laurent Pinchart,
Geert Uytterhoeven).
- Intel RAPL power capping driver updates to reduce IPI overhead in
it (Jacob Pan).
- System suspend/hibernation code cleanups (Eric Biggers, Saurabh
Sengar).
- Year 2038 fix for the process freezer (Abhilash Jindal).
- turbostat utility updates including new features (decoding of more
registers and CPUID fields, sub-second intervals support, GFX MHz
and RC6 printout, --out command line option), fixes (syscall jitter
detection and workaround, reductioin of the number of syscalls
made, fixes related to Xeon x200 processors, compiler warning
fixes) and cleanups (Len Brown, Hubert Chrzaniuk, Chen Yu)"
* tag 'pm+acpi-4.6-rc1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (182 commits)
tools/power turbostat: bugfix: TDP MSRs print bits fixing
tools/power turbostat: correct output for MSR_NHM_SNB_PKG_CST_CFG_CTL dump
tools/power turbostat: call __cpuid() instead of __get_cpuid()
tools/power turbostat: indicate SMX and SGX support
tools/power turbostat: detect and work around syscall jitter
tools/power turbostat: show GFX%rc6
tools/power turbostat: show GFXMHz
tools/power turbostat: show IRQs per CPU
tools/power turbostat: make fewer systems calls
tools/power turbostat: fix compiler warnings
tools/power turbostat: add --out option for saving output in a file
tools/power turbostat: re-name "%Busy" field to "Busy%"
tools/power turbostat: Intel Xeon x200: fix turbo-ratio decoding
tools/power turbostat: Intel Xeon x200: fix erroneous bclk value
tools/power turbostat: allow sub-sec intervals
ACPI / APEI: ERST: Fixed leaked resources in erst_init
ACPI / APEI: Fix leaked resources
intel_pstate: Do not skip samples partially
intel_pstate: Remove freq calculation from intel_pstate_calc_busy()
intel_pstate: Move intel_pstate_calc_busy() into get_target_pstate_use_performance()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
"Main kernel side changes:
- Big reorganization of the x86 perf support code. The old code grew
organically deep inside arch/x86/kernel/cpu/perf* and its naming
became somewhat messy.
The new location is under arch/x86/events/, using the following
cleaner hierarchy of source code files:
perf/x86: Move perf_event.c .................. => x86/events/core.c
perf/x86: Move perf_event_amd.c .............. => x86/events/amd/core.c
perf/x86: Move perf_event_amd_ibs.c .......... => x86/events/amd/ibs.c
perf/x86: Move perf_event_amd_iommu.[ch] ..... => x86/events/amd/iommu.[ch]
perf/x86: Move perf_event_amd_uncore.c ....... => x86/events/amd/uncore.c
perf/x86: Move perf_event_intel_bts.c ........ => x86/events/intel/bts.c
perf/x86: Move perf_event_intel.c ............ => x86/events/intel/core.c
perf/x86: Move perf_event_intel_cqm.c ........ => x86/events/intel/cqm.c
perf/x86: Move perf_event_intel_cstate.c ..... => x86/events/intel/cstate.c
perf/x86: Move perf_event_intel_ds.c ......... => x86/events/intel/ds.c
perf/x86: Move perf_event_intel_lbr.c ........ => x86/events/intel/lbr.c
perf/x86: Move perf_event_intel_pt.[ch] ...... => x86/events/intel/pt.[ch]
perf/x86: Move perf_event_intel_rapl.c ....... => x86/events/intel/rapl.c
perf/x86: Move perf_event_intel_uncore.[ch] .. => x86/events/intel/uncore.[ch]
perf/x86: Move perf_event_intel_uncore_nhmex.c => x86/events/intel/uncore_nmhex.c
perf/x86: Move perf_event_intel_uncore_snb.c => x86/events/intel/uncore_snb.c
perf/x86: Move perf_event_intel_uncore_snbep.c => x86/events/intel/uncore_snbep.c
perf/x86: Move perf_event_knc.c .............. => x86/events/intel/knc.c
perf/x86: Move perf_event_p4.c ............... => x86/events/intel/p4.c
perf/x86: Move perf_event_p6.c ............... => x86/events/intel/p6.c
perf/x86: Move perf_event_msr.c .............. => x86/events/msr.c
(Borislav Petkov)
- Update various x86 PMU constraint and hw support details (Stephane
Eranian)
- Optimize kprobes for BPF execution (Martin KaFai Lau)
- Rewrite, refactor and fix the Intel uncore PMU driver code (Thomas
Gleixner)
- Rewrite, refactor and fix the Intel RAPL PMU code (Thomas Gleixner)
- Various fixes and smaller cleanups.
There are lots of perf tooling updates as well. A few highlights:
perf report/top:
- Hierarchy histogram mode for 'perf top' and 'perf report',
showing multiple levels, one per --sort entry: (Namhyung Kim)
On a mostly idle system:
# perf top --hierarchy -s comm,dso
Then expand some levels and use 'P' to take a snapshot:
# cat perf.hist.0
- 92.32% perf
58.20% perf
22.29% libc-2.22.so
5.97% [kernel]
4.18% libelf-0.165.so
1.69% [unknown]
- 4.71% qemu-system-x86
3.10% [kernel]
1.60% qemu-system-x86_64 (deleted)
+ 2.97% swapper
#
- Add 'L' hotkey to dynamicly set the percent threshold for
histogram entries and callchains, i.e. dynamicly do what the
--percent-limit command line option to 'top' and 'report' does.
(Namhyung Kim)
perf mem:
- Allow specifying events via -e in 'perf mem record', also listing
what events can be specified via 'perf mem record -e list' (Jiri
Olsa)
perf record:
- Add 'perf record' --all-user/--all-kernel options, so that one
can tell that all the events in the command line should be
restricted to the user or kernel levels (Jiri Olsa), i.e.:
perf record -e cycles:u,instructions:u
is equivalent to:
perf record --all-user -e cycles,instructions
- Make 'perf record' collect CPU cache info in the perf.data file header:
$ perf record usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.017 MB perf.data (7 samples) ]
$ perf report --header-only -I | tail -10 | head -8
# CPU cache info:
# L1 Data 32K [0-1]
# L1 Instruction 32K [0-1]
# L1 Data 32K [2-3]
# L1 Instruction 32K [2-3]
# L2 Unified 256K [0-1]
# L2 Unified 256K [2-3]
# L3 Unified 4096K [0-3]
Will be used in 'perf c2c' and eventually in 'perf diff' to
allow, for instance running the same workload in multiple
machines and then when using 'diff' show the hardware difference.
(Jiri Olsa)
- Improved support for Java, using the JVMTI agent library to do
jitdumps that then will be inserted in synthesized
PERF_RECORD_MMAP2 events via 'perf inject' pointed to synthesized
ELF files stored in ~/.debug and keyed with build-ids, to allow
symbol resolution and even annotation with source line info, see
the changeset comments to see how to use it (Stephane Eranian)
perf script/trace:
- Decode data_src values (e.g. perf.data files generated by 'perf
mem record') in 'perf script': (Jiri Olsa)
# perf script
perf 693 [1] 4.088652: 1 cpu/mem-loads,ldlat=30/P: ffff88007d0b0f40 68100142 L1 hit|SNP None|TLB L1 or L2 hit|LCK No <SNIP>
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
- Improve support to 'data_src', 'weight' and 'addr' fields in
'perf script' (Jiri Olsa)
- Handle empty print fmts in 'perf script -s' i.e. when running
python or perl scripts (Taeung Song)
perf stat:
- 'perf stat' now shows shadow metrics (insn per cycle, etc) in
interval mode too. E.g:
# perf stat -I 1000 -e instructions,cycles sleep 1
# time counts unit events
1.000215928 519,620 instructions # 0.69 insn per cycle
1.000215928 752,003 cycles
<SNIP>
- Port 'perf kvm stat' to PowerPC (Hemant Kumar)
- Implement CSV metrics output in 'perf stat' (Andi Kleen)
perf BPF support:
- Support converting data from bpf events in 'perf data' (Wang Nan)
- Print bpf-output events in 'perf script': (Wang Nan).
# perf record -e bpf-output/no-inherit,name=evt/ -e ./test_bpf_output_3.c/map:channel.event=evt/ usleep 1000
# perf script
usleep 4882 21384.532523: evt: ffffffff810e97d1 sys_nanosleep ([kernel.kallsyms])
BPF output: 0000: 52 61 69 73 65 20 61 20 Raise a
0008: 42 50 46 20 65 76 65 6e BPF even
0010: 74 21 00 00 t!..
BPF string: "Raise a BPF event!"
#
- Add API to set values of map entries in a BPF object, be it
individual map slots or ranges (Wang Nan)
- Introduce support for the 'bpf-output' event (Wang Nan)
- Add glue to read perf events in a BPF program (Wang Nan)
- Improve support for bpf-output events in 'perf trace' (Wang Nan)
... and tons of other changes as well - see the shortlog and git log
for details!"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (342 commits)
perf stat: Add --metric-only support for -A
perf stat: Implement --metric-only mode
perf stat: Document CSV format in manpage
perf hists browser: Check sort keys before hot key actions
perf hists browser: Allow thread filtering for comm sort key
perf tools: Add sort__has_comm variable
perf tools: Recalc total periods using top-level entries in hierarchy
perf tools: Remove nr_sort_keys field
perf hists browser: Cleanup hist_browser__fprintf_hierarchy_entry()
perf tools: Remove hist_entry->fmt field
perf tools: Fix command line filters in hierarchy mode
perf tools: Add more sort entry check functions
perf tools: Fix hist_entry__filter() for hierarchy
perf jitdump: Build only on supported archs
tools lib traceevent: Add '~' operation within arg_num_eval()
perf tools: Omit unnecessary cast in perf_pmu__parse_scale
perf tools: Pass perf_hpp_list all the way through setup_sort_list
perf tools: Fix perf script python database export crash
perf jitdump: DWARF is also needed
perf bench mem: Prepare the x86-64 build for upstream memcpy_mcsafe() changes
...
|
|
* pm-cpufreq: (94 commits)
intel_pstate: Do not skip samples partially
intel_pstate: Remove freq calculation from intel_pstate_calc_busy()
intel_pstate: Move intel_pstate_calc_busy() into get_target_pstate_use_performance()
intel_pstate: Optimize calculation for max/min_perf_adj
intel_pstate: Remove extra conversions in pid calculation
cpufreq: Move scheduler-related code to the sched directory
Revert "cpufreq: postfix policy directory with the first CPU in related_cpus"
cpufreq: Reduce cpufreq_update_util() overhead a bit
cpufreq: Select IRQ_WORK if CPU_FREQ_GOV_COMMON is set
cpufreq: Remove 'policy->governor_enabled'
cpufreq: Rename __cpufreq_governor() to cpufreq_governor()
cpufreq: Relocate handle_update() to kill its declaration
cpufreq: governor: Drop unnecessary checks from show() and store()
cpufreq: governor: Fix race in dbs_update_util_handler()
cpufreq: governor: Make gov_set_update_util() static
cpufreq: governor: Narrow down the dbs_data_mutex coverage
cpufreq: governor: Make dbs_data_mutex static
cpufreq: governor: Relocate definitions of tuners structures
cpufreq: governor: Move per-CPU data to the common code
cpufreq: governor: Make governor private data per-policy
...
|
|
if kprobe is placed within update or delete hash map helpers
that hold bucket spin lock and triggered bpf program is trying to
grab the spinlock for the same bucket on the same cpu, it will
deadlock.
Fix it by extending existing recursion prevention mechanism.
Note, map_lookup and other tracing helpers don't have this problem,
since they don't hold any locks and don't modify global data.
bpf_trace_printk has its own recursive check and ok as well.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Several cases of overlapping changes, as well as one instance
(vxlan) of a bug fix in 'net' overlapping with code movement
in 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"A feature was added in 4.3 that allowed users to filter trace points
on a tasks "comm" field. But this prevented filtering on a comm field
that is within a trace event (like sched_migrate_task).
When trying to filter on when a program migrated, this change
prevented the filtering of the sched_migrate_task.
To fix this, the event fields are examined first, and then the extra
fields like "comm" and "cpu" are examined. Also, instead of testing
to assign the comm filter function based on the field's name, the
generic comm field is given a new filter type (FILTER_COMM). When
this field is used to filter the type is checked. The same is done
for the cpu filter field.
Two new special filter types are added: "COMM" and "CPU". This allows
users to still filter the tasks comm for events that have "comm" as
one of their fields, in cases that users would like to filter
sched_migrate_task on the comm of the task that called the event, and
not the comm of the task that is being migrated"
* tag 'trace-fixes-v4.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Do not have 'comm' filter override event 'comm' field
|
|
Commit 9f61668073a8d "tracing: Allow triggers to filter for CPU ids and
process names" added a 'comm' filter that will filter events based on the
current tasks struct 'comm'. But this now hides the ability to filter events
that have a 'comm' field too. For example, sched_migrate_task trace event.
That has a 'comm' field of the task to be migrated.
echo 'comm == "bash"' > events/sched_migrate_task/filter
will now filter all sched_migrate_task events for tasks named "bash" that
migrates other tasks (in interrupt context), instead of seeing when "bash"
itself gets migrated.
This fix requires a couple of changes.
1) Change the look up order for filter predicates to look at the events
fields before looking at the generic filters.
2) Instead of basing the filter function off of the "comm" name, have the
generic "comm" filter have its own filter_type (FILTER_COMM). Test
against the type instead of the name to assign the filter function.
3) Add a new "COMM" filter that works just like "comm" but will filter based
on the current task, even if the trace event contains a "comm" field.
Do the same for "cpu" field, adding a FILTER_CPU and a filter "CPU".
Cc: stable@vger.kernel.org # v4.3+
Fixes: 9f61668073a8d "tracing: Allow triggers to filter for CPU ids and process names"
Reported-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Some tracepoint have multiple fields with the same name, "nr", the first
one is a unique syscall ID, the other is a syscall argument:
# cat /sys/kernel/debug/tracing/events/syscalls/sys_enter_io_getevents/format
name: sys_enter_io_getevents
ID: 747
format:
field:unsigned short common_type; offset:0; size:2; signed:0;
field:unsigned char common_flags; offset:2; size:1; signed:0;
field:unsigned char common_preempt_count; offset:3; size:1; signed:0;
field:int common_pid; offset:4; size:4; signed:1;
field:int nr; offset:8; size:4; signed:1;
field:aio_context_t ctx_id; offset:16; size:8; signed:0;
field:long min_nr; offset:24; size:8; signed:0;
field:long nr; offset:32; size:8; signed:0;
field:struct io_event * events; offset:40; size:8; signed:0;
field:struct timespec * timeout; offset:48; size:8; signed:0;
print fmt: "ctx_id: 0x%08lx, min_nr: 0x%08lx, nr: 0x%08lx, events: 0x%08lx, timeout: 0x%08lx", ((unsigned long)(REC->ctx_id)), ((unsigned long)(REC->min_nr)), ((unsigned long)(REC->nr)), ((unsigned long)(REC->events)), ((unsigned long)(REC->timeout))
#
Fix it by renaming the "/format" common tracepoint field "nr" to "__syscall_nr".
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
[ Do not rename the struct member, just the '/format' field name ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160226132301.3ae065a4@gandalf.local.home
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Another small bug reported to me by Chunyu Hu.
When perf added a "reg" function to the function tracing event (not a
tracepoint), it caused that event to be displayed as a tracepoint and
could cause errors in tracepoint handling. That was solved by adding
a flag to ignore ftrace non-tracepoint events. But that flag was
missed when displaying events in available_events, which should only
contain tracepoint events.
This broke a documented way to enable all events with:
cat available_events > set_event
As the function non-tracepoint event would cause that to error out.
The commit here fixes that by having the available_events file not
list events that have the ignore flag set"
* tag 'trace-fixes-v4.5-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix showing function event in available_events
|
|
The ftrace:function event is only displayed for parsing the function tracer
data. It is not used to enable function tracing, and does not include an
"enable" file in its event directory.
Originally, this event was kept separate from other events because it did
not have a ->reg parameter. But perf added a "reg" parameter for its use
which caused issues, because it made the event available to functions where
it was not compatible for.
Commit 9b63776fa3ca9 "tracing: Do not enable function event with enable"
added a TRACE_EVENT_FL_IGNORE_ENABLE flag that prevented the function event
from being enabled by normal trace events. But this commit missed keeping
the function event from being displayed by the "available_events" directory,
which is used to show what events can be enabled by set_event.
One documented way to enable all events is to:
cat available_events > set_event
But because the function event is displayed in the available_events, this
now causes an INVALID error:
cat: write error: Invalid argument
Reported-by: Chunyu Hu <chuhu@redhat.com>
Fixes: 9b63776fa3ca9 "tracing: Do not enable function event with enable"
Cc: stable@vger.kernel.org # 3.4+
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Conflicts:
drivers/net/phy/bcm7xxx.c
drivers/net/phy/marvell.c
drivers/net/vxlan.c
All three conflicts were cases of simple overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Two more small fixes.
One is by Yang Shi who added a READ_ONCE_NOCHECK() to the scan of the
stack made by the stack tracer. As the stack tracer scans the entire
kernel stack, KASAN triggers seeing it as a "stack out of bounds"
error. As the scan is looking at the contents of the stack from
parent functions. The NOCHECK() tells KASAN that this is done on
purpose, and is not some kind of stack overflow.
The second fix is to the ftrace selftests, to retrieve the PID of
executed commands from the shell with '$!' and not by parsing 'jobs'"
* tag 'trace-fixes-v4.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing, kasan: Silence Kasan warning in check_stack of stack_tracer
ftracetest: Fix instance test to use proper shell command for pids
|
|
add new map type to store stack traces and corresponding helper
bpf_get_stackid(ctx, map, flags) - walk user or kernel stack and return id
@ctx: struct pt_regs*
@map: pointer to stack_trace map
@flags: bits 0-7 - numer of stack frames to skip
bit 8 - collect user stack instead of kernel
bit 9 - compare stacks by hash only
bit 10 - if two different stacks hash into the same stackid
discard old
other bits - reserved
Return: >= 0 stackid on success or negative error
stackid is a 32-bit integer handle that can be further combined with
other data (including other stackid) and used as a key into maps.
Userspace will access stackmap using standard lookup/delete syscall commands to
retrieve full stack trace for given stackid.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When enabling stack trace via "echo 1 > /proc/sys/kernel/stack_tracer_enabled",
the below KASAN warning is triggered:
BUG: KASAN: stack-out-of-bounds in check_stack+0x344/0x848 at addr ffffffc0689ebab8
Read of size 8 by task ksoftirqd/4/29
page:ffffffbdc3a27ac0 count:0 mapcount:0 mapping: (null) index:0x0
flags: 0x0()
page dumped because: kasan: bad access detected
CPU: 4 PID: 29 Comm: ksoftirqd/4 Not tainted 4.5.0-rc1 #129
Hardware name: Freescale Layerscape 2085a RDB Board (DT)
Call trace:
[<ffffffc000091300>] dump_backtrace+0x0/0x3a0
[<ffffffc0000916c4>] show_stack+0x24/0x30
[<ffffffc0009bbd78>] dump_stack+0xd8/0x168
[<ffffffc000420bb0>] kasan_report_error+0x6a0/0x920
[<ffffffc000421688>] kasan_report+0x70/0xb8
[<ffffffc00041f7f0>] __asan_load8+0x60/0x78
[<ffffffc0002e05c4>] check_stack+0x344/0x848
[<ffffffc0002e0c8c>] stack_trace_call+0x1c4/0x370
[<ffffffc0002af558>] ftrace_ops_no_ops+0x2c0/0x590
[<ffffffc00009f25c>] ftrace_graph_call+0x0/0x14
[<ffffffc0000881bc>] fpsimd_thread_switch+0x24/0x1e8
[<ffffffc000089864>] __switch_to+0x34/0x218
[<ffffffc0011e089c>] __schedule+0x3ac/0x15b8
[<ffffffc0011e1f6c>] schedule+0x5c/0x178
[<ffffffc0001632a8>] smpboot_thread_fn+0x350/0x960
[<ffffffc00015b518>] kthread+0x1d8/0x2b0
[<ffffffc0000874d0>] ret_from_fork+0x10/0x40
Memory state around the buggy address:
ffffffc0689eb980: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 f4 f4 f4
ffffffc0689eba00: f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00
>ffffffc0689eba80: 00 00 f1 f1 f1 f1 00 f4 f4 f4 f3 f3 f3 f3 00 00
^
ffffffc0689ebb00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffffffc0689ebb80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
The stacker tracer traverses the whole kernel stack when saving the max stack
trace. It may touch the stack red zones to cause the warning. So, just disable
the instrumentation to silence the warning.
Link: http://lkml.kernel.org/r/1455309960-18930-1-git-send-email-yang.shi@linaro.org
Signed-off-by: Yang Shi <yang.shi@linaro.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching
Pull livepatching fixes from Jiri Kosina:
- regression (from 4.4) fix for ordering issue, introduced by an
earlier ftrace change, that broke live patching of modules.
The fix replaces the ftrace module notifier by direct call in order
to make the ordering guaranteed and well-defined. The patch, from
Jessica Yu, has been acked both by Steven and Rusty
- error message fix from Miroslav Benes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
ftrace/module: remove ftrace module notifier
livepatch: change the error message in asm/livepatch.h header files
|
|
Remove the ftrace module notifier in favor of directly calling
ftrace_module_enable() and ftrace_release_mod() in the module loader.
Hard-coding the function calls directly in the module loader removes
dependence on the module notifier call chain and provides better
visibility and control over what gets called when, which is important
to kernel utilities such as livepatch.
This fixes a notifier ordering issue in which the ftrace module notifier
(and hence ftrace_module_enable()) for coming modules was being called
after klp_module_notify(), which caused livepatch modules to initialize
incorrectly. This patch removes dependence on the module notifier call
chain in favor of hard coding the corresponding function calls in the
module loader. This ensures that ftrace and livepatch code get called in
the correct order on patch module load and unload.
Fixes: 5156dca34a3e ("ftrace: Fix the race between ftrace and insmod")
Signed-off-by: Jessica Yu <jeyu@redhat.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Petr Mladek <pmladek@suse.cz>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
|
|
When doing ebpf+kprobe on some hot TCP functions (e.g.
tcp_rcv_established), the kprobe_dispatcher() function
shows up in 'perf report'.
In kprobe_dispatcher(), there is a lot of cache bouncing
on 'tk->nhit++'. 'tk->nhit' and 'tk->tp.flags' also share
the same cacheline.
perf report (cycles:pp):
8.30% ipv4_dst_check
4.74% copy_user_enhanced_fast_string
3.93% dst_release
2.80% tcp_v4_rcv
2.31% queued_spin_lock_slowpath
2.30% _raw_spin_lock
1.88% mlx4_en_process_rx_cq
1.84% eth_get_headlen
1.81% ip_rcv_finish
~~~~
1.71% kprobe_dispatcher
~~~~
1.55% mlx4_en_xmit
1.09% __probe_kernel_read
perf report after patch:
9.15% ipv4_dst_check
5.00% copy_user_enhanced_fast_string
4.12% dst_release
2.96% tcp_v4_rcv
2.50% _raw_spin_lock
2.39% queued_spin_lock_slowpath
2.11% eth_get_headlen
2.03% mlx4_en_process_rx_cq
1.69% mlx4_en_xmit
1.19% ip_rcv_finish
1.12% __probe_kernel_read
1.02% ehci_hcd_cleanup
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Kernel Team <kernel-team@fb.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1454531308-2441898-1-git-send-email-kafai@fb.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This patch adds the powernv_throttle tracepoint to trace the CPU
frequency throttling event, which is used by the powernv-cpufreq
driver in POWER8.
Signed-off-by: Shilpasri G Bhat <shilpa.bhat@linux.vnet.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"A cleanup to the stack tracer broke stack tracing on s390. Here's a
simple fix to correct that issue"
* tag 'trace-v4.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/stacktrace: Show entire trace if passed in function not found
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"This is much bigger than typical fixes, but Peter found a category of
races that spurred more fixes and more debugging enhancements. Work
started before the merge window, but got finished only now.
Aside of that this contains the usual small fixes to perf and tools.
Nothing particular exciting"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits)
perf: Remove/simplify lockdep annotation
perf: Synchronously clean up child events
perf: Untangle 'owner' confusion
perf: Add flags argument to perf_remove_from_context()
perf: Clean up sync_child_event()
perf: Robustify event->owner usage and SMP ordering
perf: Fix STATE_EXIT usage
perf: Update locking order
perf: Remove __free_event()
perf/bpf: Convert perf_event_array to use struct file
perf: Fix NULL deref
perf/x86: De-obfuscate code
perf/x86: Fix uninitialized value usage
perf: Fix race in perf_event_exit_task_context()
perf: Fix orphan hole
perf stat: Do not clean event's private stats
perf hists: Fix HISTC_MEM_DCACHELINE width setting
perf annotate browser: Fix behaviour of Shift-Tab with nothing focussed
perf tests: Remove wrong semicolon in while loop in CQM test
perf: Synchronously free aux pages in case of allocation failure
...
|
|
When a max stack trace is discovered, the stack dump is saved. In order to
not record the overhead of the stack tracer, the ip of the traced function
is looked for within the dump. The trace is started from the location of
that function. But if for some reason the ip is not found, the entire stack
trace is then truncated. That's not very useful. Instead, print everything
if the ip of the traced function is not found within the trace.
This issue showed up on s390.
Link: http://lkml.kernel.org/r/20160129102241.1b3c9c04@gandalf.local.home
Fixes: 72ac426a5bb0 ("tracing: Clean up stack tracing and fix fentry updates")
Cc: stable@vger.kernel.org # v4.3+
Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Tested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Robustify refcounting.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: vince@deater.net
Link: http://lkml.kernel.org/r/20160126045947.GA40151@ast-mbp.thefacebook.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull minor tracing fixes from Steven Rostedt:
"This includes three minor fixes, mostly due to cut-and-paste issues.
The first is a cut and paste issue that changed the amount of stack to
skip when tracing a stack dump from 0 to 6, which basically made the
stack disappear for small stack traces.
The second fix is just removing an unused field in a struct that is no
longer used, and currently just wastes space.
The third is another cut-and-paste fix that had a tracepoint recording
the wrong field (it was recording the previous field a second time)"
* tag 'trace-v4.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/dma-buf/fence: Fix timeline str value on fence_annotate_wait_on
ftrace: Remove unused nr_trampolines var
tracing: Fix stacktrace skip depth in trace_buffer_unlock_commit_regs()
|
|
While cleaning the stacktrace code I unintentially changed the skip depth of
trace_buffer_unlock_commit_regs() from 0 to 6. kprobes uses this function,
and with skipping 6 call backs, it can easily produce no stack.
Here's how I tested it:
# echo 'p:ext4_sync_fs ext4_sync_fs ' > /sys/kernel/debug/tracing/kprobe_events
# echo 1 > /sys/kernel/debug/tracing/events/kprobes/enable
# cat /sys/kernel/debug/trace
sync-2394 [005] 502.457060: ext4_sync_fs: (ffffffff81317650)
sync-2394 [005] 502.457063: kernel_stack: <stack trace>
sync-2394 [005] 502.457086: ext4_sync_fs: (ffffffff81317650)
sync-2394 [005] 502.457087: kernel_stack: <stack trace>
sync-2394 [005] 502.457091: ext4_sync_fs: (ffffffff81317650)
After putting back the skip stack to zero, we have:
sync-2270 [000] 748.052693: ext4_sync_fs: (ffffffff81317650)
sync-2270 [000] 748.052695: kernel_stack: <stack trace>
=> iterate_supers (ffffffff8126412e)
=> sys_sync (ffffffff8129c4b6)
=> entry_SYSCALL_64_fastpath (ffffffff8181f0b2)
sync-2270 [000] 748.053017: ext4_sync_fs: (ffffffff81317650)
sync-2270 [000] 748.053019: kernel_stack: <stack trace>
=> iterate_supers (ffffffff8126412e)
=> sys_sync (ffffffff8129c4b6)
=> entry_SYSCALL_64_fastpath (ffffffff8181f0b2)
sync-2270 [000] 748.053381: ext4_sync_fs: (ffffffff81317650)
sync-2270 [000] 748.053383: kernel_stack: <stack trace>
=> iterate_supers (ffffffff8126412e)
=> sys_sync (ffffffff8129c4b6)
=> entry_SYSCALL_64_fastpath (ffffffff8181f0b2)
Cc: stable@vger.kernel.org # v4.4+
Fixes: 73dddbb57bb0 "tracing: Only create stacktrace option when STACKTRACE is configured"
Reported-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Tested-by: Brendan Gregg <brendan.d.gregg@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"Not much new with tracing for this release. Mostly just clean ups and
minor fixes.
Here's what else is new:
- A new TRACE_EVENT_FN_COND macro, combining both _FN and _COND for
those that want both.
- New selftest to test the instance create and delete
- Better debug output when ftrace fails"
* tag 'trace-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (24 commits)
ftrace: Fix the race between ftrace and insmod
ftrace: Add infrastructure for delayed enabling of module functions
x86: ftrace: Fix the comments for ftrace_modify_code_direct()
tracing: Fix comment to use tracing_on over tracing_enable
metag: ftrace: Fix the comments for ftrace_modify_code
sh: ftrace: Fix the comments for ftrace_modify_code()
ia64: ftrace: Fix the comments for ftrace_modify_code()
ftrace: Clean up ftrace_module_init() code
ftrace: Join functions ftrace_module_init() and ftrace_init_module()
tracing: Introduce TRACE_EVENT_FN_COND macro
tracing: Use seq_buf_used() in seq_buf_to_user() instead of len
bpf: Constify bpf_verifier_ops structure
ftrace: Have ftrace_ops_get_func() handle RCU and PER_CPU flags too
ftrace: Remove use of control list and ops
ftrace: Fix output of enabled_functions for showing tramp
ftrace: Fix a typo in comment
ftrace: Show all tramps registered to a record on ftrace_bug()
ftrace: Add variable ftrace_expected for archs to show expected code
ftrace: Add new type to distinguish what kind of ftrace_bug()
tracing: Update cond flag when enabling or disabling a trigger
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
"All kinds of stuff. That probably should've been 5 or 6 separate
branches, but by the time I'd realized how large and mixed that bag
had become it had been too close to -final to play with rebasing.
Some fs/namei.c cleanups there, memdup_user_nul() introduction and
switching open-coded instances, burying long-dead code, whack-a-mole
of various kinds, several new helpers for ->llseek(), assorted
cleanups and fixes from various people, etc.
One piece probably deserves special mention - Neil's
lookup_one_len_unlocked(). Similar to lookup_one_len(), but gets
called without ->i_mutex and tries to avoid ever taking it. That, of
course, means that it's not useful for any directory modifications,
but things like getting inode attributes in nfds readdirplus are fine
with that. I really should've asked for moratorium on lookup-related
changes this cycle, but since I hadn't done that early enough... I
*am* asking for that for the coming cycle, though - I'm going to try
and get conversion of i_mutex to rwsem with ->lookup() done under lock
taken shared.
There will be a patch closer to the end of the window, along the lines
of the one Linus had posted last May - mechanical conversion of
->i_mutex accesses to inode_lock()/inode_unlock()/inode_trylock()/
inode_is_locked()/inode_lock_nested(). To quote Linus back then:
-----
| This is an automated patch using
|
| sed 's/mutex_lock(&\(.*\)->i_mutex)/inode_lock(\1)/'
| sed 's/mutex_unlock(&\(.*\)->i_mutex)/inode_unlock(\1)/'
| sed 's/mutex_lock_nested(&\(.*\)->i_mutex,[ ]*I_MUTEX_\([A-Z0-9_]*\))/inode_lock_nested(\1, I_MUTEX_\2)/'
| sed 's/mutex_is_locked(&\(.*\)->i_mutex)/inode_is_locked(\1)/'
| sed 's/mutex_trylock(&\(.*\)->i_mutex)/inode_trylock(\1)/'
|
| with a very few manual fixups
-----
I'm going to send that once the ->i_mutex-affecting stuff in -next
gets mostly merged (or when Linus says he's about to stop taking
merges)"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
nfsd: don't hold i_mutex over userspace upcalls
fs:affs:Replace time_t with time64_t
fs/9p: use fscache mutex rather than spinlock
proc: add a reschedule point in proc_readfd_common()
logfs: constify logfs_block_ops structures
fcntl: allow to set O_DIRECT flag on pipe
fs: __generic_file_splice_read retry lookup on AOP_TRUNCATED_PAGE
fs: xattr: Use kvfree()
[s390] page_to_phys() always returns a multiple of PAGE_SIZE
nbd: use ->compat_ioctl()
fs: use block_device name vsprintf helper
lib/vsprintf: add %*pg format specifier
fs: use gendisk->disk_name where possible
poll: plug an unused argument to do_poll
amdkfd: don't open-code memdup_user()
cdrom: don't open-code memdup_user()
rsxx: don't open-code memdup_user()
mtip32xx: don't open-code memdup_user()
[um] mconsole: don't open-code memdup_user_nul()
[um] hostaudio: don't open-code memdup_user()
...
|
|
We hit ftrace_bug report when booting Android on a 64bit ATOM SOC chip.
Basically, there is a race between insmod and ftrace_run_update_code.
After load_module=>ftrace_module_init, another thread jumps in to call
ftrace_run_update_code=>ftrace_arch_code_modify_prepare
=>set_all_modules_text_rw, to change all modules
as RW. Since the new module is at MODULE_STATE_UNFORMED, the text attribute
is not changed. Then, the 2nd thread goes ahead to change codes.
However, load_module continues to call complete_formation=>set_section_ro_nx,
then 2nd thread would fail when probing the module's TEXT.
The patch fixes it by using notifier to delay the enabling of ftrace
records to the time when module is at state MODULE_STATE_COMING.
Link: http://lkml.kernel.org/r/567CE628.3000609@intel.com
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Qiu Peiyang pointed out that there's a race when enabling function tracing
and loading a module. In order to make the modifications of converting nops
in the prologue of functions into callbacks, the text needs to be converted
from read-only to read-write. When enabling function tracing, the text
permission is updated, the functions are modified, and then they are put
back.
When loading a module, the updates to convert function calls to mcount is
done before the module text is set to read-only. But after it is done, the
module text is visible by the function tracer. Thus we have the following
race:
CPU 0 CPU 1
----- -----
start function tracing
set text to read-write
load_module
add functions to ftrace
set module text read-only
update all functions to callbacks
modify module functions too
< Can't it's read-only >
When this happens, ftrace detects the issue and disables itself till the
next reboot.
To fix this, a new DISABLED flag is added for ftrace records, which all
module functions get when they are added. Then later, after the module code
is all set, the records will have the DISABLED flag cleared, and they will
be enabled if any callback wants all functions to be traced.
Note, this doesn't add the delay to later. It simply changes the
ftrace_module_init() to do both the setting of DISABLED records, and then
immediately calls the enable code. This helps with testing this new code as
it has the same behavior as previously. Another change will come after this
to have the ftrace_module_enable() called after the text is set to
read-only.
Cc: Qiu Peiyang <peiyangx.qiu@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
When we do cat /sys/kernel/debug/tracing/printk_formats, we hit kernel
panic at t_show.
general protection fault: 0000 [#1] PREEMPT SMP
CPU: 0 PID: 2957 Comm: sh Tainted: G W O 3.14.55-x86_64-01062-gd4acdc7 #2
RIP: 0010:[<ffffffff811375b2>]
[<ffffffff811375b2>] t_show+0x22/0xe0
RSP: 0000:ffff88002b4ebe80 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000004
RDX: 0000000000000004 RSI: ffffffff81fd26a6 RDI: ffff880032f9f7b1
RBP: ffff88002b4ebe98 R08: 0000000000001000 R09: 000000000000ffec
R10: 0000000000000000 R11: 000000000000000f R12: ffff880004d9b6c0
R13: 7365725f6d706400 R14: ffff880004d9b6c0 R15: ffffffff82020570
FS: 0000000000000000(0000) GS:ffff88003aa00000(0063) knlGS:00000000f776bc40
CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033
CR2: 00000000f6c02ff0 CR3: 000000002c2b3000 CR4: 00000000001007f0
Call Trace:
[<ffffffff811dc076>] seq_read+0x2f6/0x3e0
[<ffffffff811b749b>] vfs_read+0x9b/0x160
[<ffffffff811b7f69>] SyS_read+0x49/0xb0
[<ffffffff81a3a4b9>] ia32_do_call+0x13/0x13
---[ end trace 5bd9eb630614861e ]---
Kernel panic - not syncing: Fatal exception
When the first time find_next calls find_next_mod_format, it should
iterate the trace_bprintk_fmt_list to find the first print format of
the module. However in current code, start_index is smaller than *pos
at first, and code will not iterate the list. Latter container_of will
get the wrong address with former v, which will cause mod_fmt be a
meaningless object and so is the returned mod_fmt->fmt.
This patch will fix it by correcting the start_index. After fixed,
when the first time calls find_next_mod_format, start_index will be
equal to *pos, and code will iterate the trace_bprintk_fmt_list to
get the right module printk format, so is the returned mod_fmt->fmt.
Link: http://lkml.kernel.org/r/5684B900.9000309@intel.com
Cc: stable@vger.kernel.org # 3.12+
Fixes: 102c9323c35a8 "tracing: Add __tracepoint_string() to export string pointers"
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
A _lot_ of ->write() instances were open-coding it; some are
converted to memdup_user_nul(), a lot more remain...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The file tracing_enable is obsolete and does not exist anymore. Replace
the comment that references it with the proper tracing_on file.
Link: http://lkml.kernel.org/r/1450787141-45544-1-git-send-email-chuhu@redhat.com
Signed-off-by: Chuyu Hu <chuhu@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The start and end variables were only used when ftrace_module_init() was
split up into multiple functions. No need to keep them around after the
merger.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Simple cleanup. No need for two functions here.
The whole work can simply be done inside 'ftrace_module_init'.
Link: http://lkml.kernel.org/r/1449067197-5718-1-git-send-email-abelvesa@linux.com
Signed-off-by: Abel Vesa <abelvesa@linux.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
This bpf_verifier_ops structure is never modified, like the other
bpf_verifier_ops structures, so declare it as const.
Done with the help of Coccinelle.
Link: http://lkml.kernel.org/r/1449855359-13724-1-git-send-email-Julia.Lawall@lip6.fr
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Jiri Olsa noted that the change to replace the control_ops did not update
the trampoline for when running perf on a single CPU and with CONFIG_PREEMPT
disabled (where dynamic ops, like perf, can use trampolines directly). The
result was that perf function could be called when RCU is not watching as
well as not handle the ftrace_local_disable().
Modify the ftrace_ops_get_func() to also check the RCU and PER_CPU ops flags
and use the recursive function if they are set. The recursive function is
modified to check those flags and execute the appropriate checks if they are
set.
Link: http://lkml.kernel.org/r/20151201134213.GA14155@krava.brq.redhat.com
Reported-by: Jiri Olsa <jolsa@redhat.com>
Patch-fixed-up-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
Currently perf has its own list function within the ftrace infrastructure
that seems to be used only to allow for it to have per-cpu disabling as well
as a check to make sure that it's not called while RCU is not watching. It
uses something called the "control_ops" which is used to iterate over ops
under it with the control_list_func().
The problem is that this control_ops and control_list_func unnecessarily
complicates the code. By replacing FTRACE_OPS_FL_CONTROL with two new flags
(FTRACE_OPS_FL_RCU and FTRACE_OPS_FL_PER_CPU) we can remove all the code
that is special with the control ops and add the needed checks within the
generic ftrace_list_func().
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
When showing all tramps registered to a ftrace record in the file
enabled_functions, it exits the loop with ops == NULL. But then it is
suppose to show the function on the ops->trampoline and
add_trampoline_func() is called with the given ops. But because ops is now
NULL (to exit the loop), it always shows the static trampoline instead of
the one that is really registered to the record.
The call to add_trampoline_func() that shows the trampoline for the given
ops needs to be called at every iteration.
Fixes: 39daa7b9e895 "ftrace: Show all tramps registered to a record on ftrace_bug()"
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
s/ARCH_SUPPORT_FTARCE_OPS/ARCH_SUPPORTS_FTRACE_OPS/
Link: http://lkml.kernel.org/r/1448879016-8659-1-git-send-email-huawei.libin@huawei.com
Signed-off-by: Li Bin <huawei.libin@huawei.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"This tree includes four core perf fixes for misc bugs, three fixes to
x86 PMU drivers, and two updates to old email addresses"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Do not send exit event twice
perf/x86/intel: Fix INTEL_FLAGS_UEVENT_CONSTRAINT_DATALA_NA macro
perf/x86/intel: Make L1D_PEND_MISS.FB_FULL not constrained on Haswell
perf: Fix PERF_EVENT_IOC_PERIOD deadlock
treewide: Remove old email address
perf/x86: Fix LBR call stack save/restore
perf: Update email address in MAINTAINERS
perf/core: Robustify the perf_cgroup_from_task() RCU checks
perf/core: Fix RCU problem with cgroup context switching code
|
|
The set_event_pid filter relies on attaching to the sched_switch and
sched_wakeup tracepoints to see if it should filter the tracing on schedule
tracepoints. By adding the callbacks to sched_wakeup, pids in the
set_event_pid file will trace the wakeups of those tasks with those pids.
But sched_wakeup_new and sched_waking were missed. These two should also be
traced. Luckily, these tracepoints share the same class as sched_wakeup
which means they can use the same pre and post callbacks as sched_wakeup
does.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
When an anomaly is detected in the function call modification code,
ftrace_bug() is called to disable function tracing as well as give any
information that may help debug the problem. Currently, only the first found
trampoline that is attached to the failed record is reported. Instead, show
all trampolines that are hooked to it.
Also, not only show the ops pointer but also report the function it calls.
While at it, add this info to the enabled_functions debug file too.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
When an anomaly is found while modifying function code, ftrace_bug() is
called which disables the function tracing infrastructure and reports
information about what failed. If the code that is to be replaced does not
match what is expected, then actual code is shown. Currently there is no
arch generic way to show what was expected.
Add a new variable pointer calld ftrace_expected that the arch code can set
to point to what it expected so that ftrace_bug() can report the actual text
as well as the text that was expected to be there.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The ftrace function hook utility has several internal checks to make sure
that whatever it modifies is exactly what it expects to be modifying. This
is essential as modifying running code can be extremely dangerous to the
system.
When an anomaly is detected, ftrace_bug() is called which sends a splat to
the console and disables function tracing. There's some extra information
that is printed to help diagnose the issue.
One thing that is missing though is output of what ftrace was doing at the
time of the crash. Was it updating a call site or perhaps converting a call
site to a nop? A new global enum variable is created to state what ftrace
was doing at the time of the anomaly, and this is reported in ftrace_bug().
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
When a trigger is enabled, the cond flag should be set beforehand,
otherwise a trigger that's expecting to process a trace record
(e.g. one with post_trigger set) could be invoked without one.
Likewise a trigger's cond flag should be reset after it's disabled,
not before.
Link: http://lkml.kernel.org/r/a420b52a67b1c2d3cab017914362d153255acb99.1448303214.git.tom.zanussi@linux.intel.com
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
When crossing over to a new page, commit the current work. This will allow
readers to get data with less latency, and also simplifies the work to get
timestamps working for interrupted events.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
The first commit of a buffer page updates the timestamp of that page. No
need to have the update to the next page add the timestamp too. It will only
be replaced by the first commit on that page anyway.
Only update to a page if it contains an event.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
