summaryrefslogtreecommitdiff
path: root/fs/quota
AgeCommit message (Collapse)AuthorFilesLines
2014-11-10vfs: Remove i_dquot field from inodeJan Kara1-3/+0
All filesystems using VFS quotas are now converted to use their private i_dquot fields. Remove the i_dquot field from generic inode structure. Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2014-11-10quota: Use function to provide i_dquot pointersJan Kara1-23/+31
i_dquot array is used by relatively few filesystems (ext?, ocfs2, jfs, reiserfs) so it is beneficial to move this array to fs-private part of the inode. We cannot just pass quota pointers from filesystems to quota functions because during quotaon and quotaoff we have to traverse list of all inodes and manipulate i_dquot pointers for each inode. So we provide a function which generic quota code can use to get pointer to the i_dquot array from the filesystem. Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2014-11-10quota: Allow each filesystem to specify which quota types it supportsJan Kara1-2/+11
Currently all filesystems supporting VFS quota support user and group quotas. With introduction of project quotas this is going to change so make sure filesystem isn't called for quota type it doesn't support by introduction of a bitmask determining which quota types each filesystem supports. Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2014-11-10quota: Remove const from function declarationsJan Kara1-2/+2
We don't use const through VFS too much so just remove it from quota function declarations. Signed-off-by: Jan Kara <jack@suse.cz>
2014-11-04quota: Add log level to printkAnton Blanchard1-2/+2
JK: Added VFS: prefix to the message when changing it to make it more standard. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Jan Kara <jack@suse.cz>
2014-10-22quota: Properly return errors from dquot_writeback_dquots()Jan Kara1-1/+1
Due to a switched left and right side of an assignment, dquot_writeback_dquots() never returned error. This could result in errors during quota writeback to not be reported to userspace properly. Fix it. CC: stable@vger.kernel.org Coverity-id: 1226884 Signed-off-by: Jan Kara <jack@suse.cz>
2014-09-08percpu_counter: add @gfp to percpu_counter_init()Tejun Heo1-1/+1
Percpu allocator now supports allocation mask. Add @gfp to percpu_counter_init() so that !GFP_KERNEL allocation masks can be used with percpu_counters too. We could have left percpu_counter_init() alone and added percpu_counter_init_gfp(); however, the number of users isn't that high and introducing _gfp variants to all percpu data structures would be quite ugly, so let's just do the conversion. This is the one with the most users. Other percpu data structures are a lot easier to convert. This patch doesn't make any functional difference. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Jan Kara <jack@suse.cz> Acked-by: "David S. Miller" <davem@davemloft.net> Cc: x86@kernel.org Cc: Jens Axboe <axboe@kernel.dk> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org>
2014-07-15fs/quota: kernel-doc warning fixesFabian Frederick2-3/+2
type and id were removed and qid added to quota_send_warning in commit 431f19744d15 ("userns: Convert quota netlink aka quota_send_warning") Cc: Jan Kara <jack@suse.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Kara <jack@suse.cz>
2014-07-15quota: remove dqptr_semNiu Yawei1-65/+49
Remove dqptr_sem to make quota code scalable: Remove the dqptr_sem, accessing inode->i_dquot now protected by dquot_srcu, and changing inode->i_dquot is now serialized by dq_data_lock. Signed-off-by: Lai Siyao <lai.siyao@intel.com> Signed-off-by: Niu Yawei <yawei.niu@intel.com> Signed-off-by: Jan Kara <jack@suse.cz>
2014-07-15quota: simplify remove_inode_dquot_ref()Niu Yawei1-32/+19
Simplify the remove_inode_dquot_ref() to make it more obvious that now we keep one reference for each dquot from inodes. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Niu Yawei <yawei.niu@intel.com> Signed-off-by: Jan Kara <jack@suse.cz>
2014-07-15quota: avoid unnecessary dqget()/dqput() callsNiu Yawei1-1/+14
Avoid unnecessary dqget()/dqput() calls in __dquot_initialize(), that will introduce global lock contention otherwise. Signed-off-by: Lai Siyao <lai.siyao@intel.com> Signed-off-by: Niu Yawei <yawei.niu@intel.com> Signed-off-by: Jan Kara <jack@suse.cz>
2014-07-15quota: protect Q_GETFMT by dqonoff_mutexNiu Yawei1-3/+3
dqptr_sem will go away. Protect Q_GETFMT quotactl by dqonoff_mutex instead. This is also enough to make sure quota info will not go away while we are looking at it. Signed-off-by: Lai Siyao <lai.siyao@intel.com> Signed-off-by: Niu Yawei <yawei.niu@intel.com> Signed-off-by: Jan Kara <jack@suse.cz>
2014-07-15quota: missing lock in dqcache_shrink_scan()Niu Yawei1-0/+2
Commit 1ab6c4997e04 (fs: convert fs shrinkers to new scan/count API) accidentally removed locking from quota shrinker. Fix it - dqcache_shrink_scan() should use dq_list_lock to protect the scan on free_dquots list. CC: stable@vger.kernel.org Fixes: 1ab6c4997e04a00c50c6d786c2f046adc0d1f5de Signed-off-by: Niu Yawei <yawei.niu@intel.com> Signed-off-by: Jan Kara <jack@suse.cz>
2014-05-05xfs: fix Q_XQUOTARM ioctlEric Sandeen1-1/+13
The Q_XQUOTARM quotactl was not working properly, because we weren't passing around proper flags. The xfs_fs_set_xstate() ioctl handler used the same flags for Q_XQUOTAON/OFF as well as for Q_XQUOTARM, but Q_XQUOTAON/OFF look for XFS_UQUOTA_ACCT, XFS_UQUOTA_ENFD, XFS_GQUOTA_ACCT etc, i.e. quota type + state, while Q_XQUOTARM looks only for the type of quota, i.e. XFS_DQ_USER, XFS_DQ_GROUP etc. Unfortunately these flag spaces overlap a bit, so we got semi-random results for Q_XQUOTARM; i.e. the value for XFS_DQ_USER == XFS_UQUOTA_ACCT, etc. yeargh. Add a new quotactl op vector specifically for the QUOTARM operation, since it operates with a different flag space. This has been broken more or less forever, AFAICT. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Acked-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-04-07Merge branch 'for_linus' of ↵Linus Torvalds1-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull ext3 improvements, cleanups, reiserfs fix from Jan Kara: "various cleanups for ext2, ext3, udf, isofs, a documentation update for quota, and a fix of a race in reiserfs readdir implementation" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: reiserfs: fix race in readdir ext2: acl: remove unneeded include of linux/capability.h ext3: explicitly remove inode from orphan list after failed direct io fs/isofs/inode.c add __init to init_inodecache() ext3: Speedup WB_SYNC_ALL pass fs/quota/Kconfig: Update filesystems ext3: Update outdated comment before ext3_ordered_writepage() ext3: Update PF_MEMALLOC handling in ext3_write_inode() ext2/3: use prandom_u32() instead of get_random_bytes() ext3: remove an unneeded check in ext3_new_blocks() ext3: remove unneeded check in ext3_ordered_writepage() fs: Mark function as static in ext3/xattr_security.c fs: Mark function as static in ext3/dir.c fs: Mark function as static in ext2/xattr_security.c ext3: Add __init macro to init_inodecache ext2: Add __init macro to init_inodecache udf: Add __init macro to init_inodecache fs: udf: parse_options: blocksize check
2014-04-03quota: provide function to grab quota structure referenceJan Kara1-2/+2
Provide dqgrab() function to get quota structure reference when we are sure it already has at least one active reference. Make use of this function inside quota code. Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Mark Fasheh <mfasheh@suse.de> Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-04fs/quota/Kconfig: Update filesystemsFabian Frederick1-3/+4
Update Kconfig with a complete list of supported filesystems. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Jan Kara <jack@suse.cz>
2014-02-20quota: Fix race between dqput() and dquot_scan_active()Jan Kara1-3/+11
Currently last dqput() can race with dquot_scan_active() causing it to call callback for an already deactivated dquot. The race is as follows: CPU1 CPU2 dqput() spin_lock(&dq_list_lock); if (atomic_read(&dquot->dq_count) > 1) { - not taken if (test_bit(DQ_ACTIVE_B, &dquot->dq_flags)) { spin_unlock(&dq_list_lock); ->release_dquot(dquot); if (atomic_read(&dquot->dq_count) > 1) - not taken dquot_scan_active() spin_lock(&dq_list_lock); if (!test_bit(DQ_ACTIVE_B, &dquot->dq_flags)) - not taken atomic_inc(&dquot->dq_count); spin_unlock(&dq_list_lock); - proceeds to release dquot ret = fn(dquot, priv); - called for inactive dquot Fix the problem by making sure possible ->release_dquot() is finished by the time we call the callback and new calls to it will notice reference dquot_scan_active() has taken and bail out. CC: stable@vger.kernel.org # >= 2.6.29 Signed-off-by: Jan Kara <jack@suse.cz>
2013-11-19genetlink: make multicast groups const, prevent abuseJohannes Berg1-8/+7
Register generic netlink multicast groups as an array with the family and give them contiguous group IDs. Then instead of passing the global group ID to the various functions that send messages, pass the ID relative to the family - for most families that's just 0 because the only have one group. This avoids the list_head and ID in each group, adding a new field for the mcast group ID offset to the family. At the same time, this allows us to prevent abusing groups again like the quota and dropmon code did, since we can now check that a family only uses a group it owns. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-19genetlink: pass family to functions using groupsJohannes Berg1-1/+1
This doesn't really change anything, but prepares for the next patch that will change the APIs to pass the group ID within the family, rather than the global group ID. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-19quota/genetlink: use proper genetlink multicast APIsJohannes Berg1-2/+15
The quota code is abusing the genetlink API and is using its family ID as the multicast group ID, which is invalid and may belong to somebody else (and likely will.) Make the quota code use the correct API, but since this is already used as-is by userspace, reserve a family ID for this code and also reserve that group ID to not break userspace assumptions. Acked-by: Jan Kara <jack@suse.cz> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-04quota: info leak in quota_getquota()Dan Carpenter1-0/+1
The if_dqblk struct has a 4 byte hole at the end of the struct so uninitialized stack information is leaked to user space. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jan Kara <jack@suse.cz>
2013-09-10fs: convert fs shrinkers to new scan/count APIDave Chinner1-18/+11
Convert the filesystem shrinkers to use the new API, and standardise some of the behaviours of the shrinkers at the same time. For example, nr_to_scan means the number of objects to scan, not the number of objects to free. I refactored the CIFS idmap shrinker a little - it really needs to be broken up into a shrinker per tree and keep an item count with the tree root so that we don't need to walk the tree every time the shrinker needs to count the number of objects in the tree (i.e. all the time under memory pressure). [glommer@openvz.org: fixes for ext4, ubifs, nfs, cifs and glock. Fixes are needed mainly due to new code merged in the tree] [assorted fixes folded in] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Acked-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Acked-by: Jan Kara <jack@suse.cz> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-10super: fix calculation of shrinkable objects for small numbersGlauber Costa1-3/+2
The sysctl knob sysctl_vfs_cache_pressure is used to determine which percentage of the shrinkable objects in our cache we should actively try to shrink. It works great in situations in which we have many objects (at least more than 100), because the aproximation errors will be negligible. But if this is not the case, specially when total_objects < 100, we may end up concluding that we have no objects at all (total / 100 = 0, if total < 100). This is certainly not the biggest killer in the world, but may matter in very low kernel memory situations. Signed-off-by: Glauber Costa <glommer@openvz.org> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-09Merge tag 'xfs-for-linus-v3.12-rc1' of git://oss.sgi.com/xfs/xfsLinus Torvalds1-0/+29
Pull xfs updates from Ben Myers: "For 3.12-rc1 there are a number of bugfixes in addition to work to ease usage of shared code between libxfs and the kernel, the rest of the work to enable project and group quotas to be used simultaneously, performance optimisations in the log and the CIL, directory entry file type support, fixes for log space reservations, some spelling/grammar cleanups, and the addition of user namespace support. - introduce readahead to log recovery - add directory entry file type support - fix a number of spelling errors in comments - introduce new Q_XGETQSTATV quotactl for project quotas - add USER_NS support - log space reservation rework - CIL optimisations - kernel/userspace libxfs rework" * tag 'xfs-for-linus-v3.12-rc1' of git://oss.sgi.com/xfs/xfs: (112 commits) xfs: XFS_MOUNT_QUOTA_ALL needed by userspace xfs: dtype changed xfs_dir2_sfe_put_ino to xfs_dir3_sfe_put_ino Fix wrong flag ASSERT in xfs_attr_shortform_getvalue xfs: finish removing IOP_* macros. xfs: inode log reservations are too small xfs: check correct status variable for xfs_inobt_get_rec() call xfs: inode buffers may not be valid during recovery readahead xfs: check LSN ordering for v5 superblocks during recovery xfs: btree block LSN escaping to disk uninitialised XFS: Assertion failed: first <= last && last < BBTOB(bp->b_length), file: fs/xfs/xfs_trans_buf.c, line: 568 xfs: fix bad dquot buffer size in log recovery readahead xfs: don't account buffer cancellation during log recovery readahead xfs: check for underflow in xfs_iformat_fork() xfs: xfs_dir3_sfe_put_ino can be static xfs: introduce object readahead to log recovery xfs: Simplify xfs_ail_min() with list_first_entry_or_null() xfs: Register hotcpu notifier after initialization xfs: add xfs sb v4 support for dirent filetype field xfs: Add write support for dirent filetype field xfs: Add read-only support for dirent filetype field ...
2013-08-20quota: Add a new quotactl command Q_XGETQSTATVChandra Seetharaman1-0/+29
XFS now supports three types of quotas (user, group and project). Current version of Q_XGETSTAT has support for only two types of quotas. In order to support three types of quotas, the interface, specifically struct fs_quota_stat, need to be expanded. Current version of fs_quota_stat does not allow expansion without breaking backward compatibility. So, a quotactl command and new fs_quota_stat structure need to be added. This patch adds a new command Q_XGETQSTATV to quotactl() which takes a new data structure fs_quota_statv. This new data structure provides support for future expansion and backward compatibility. Callers of the new quotactl command have to set the version of the data structure being passed, and kernel will fill as much data as requested. If the kernel does not support the user-space provided version, EINVAL will be returned. User-space can reduce the version number and call the same quotactl again. Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Rich Johnston <rjohnston@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com> [v2: Applied rjohnston's suggestions as per Chandra's request. -bpm]
2013-08-17quota: provide interface for readding allocated space into reserved spaceJan Kara1-0/+46
ext4 needs to convert allocated (metadata) blocks back into blocks reserved for delayed allocation. Add functions into quota code for supporting such operation. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2013-07-04quota: Convert use of typedef ctl_table to struct ctl_tableJoe Perches1-3/+3
This typedef is unnecessary and should just be removed. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jan Kara <jack@suse.cz>
2013-03-11quota: add missing use of dq_data_lock in __dquot_initializeJeff Mahoney1-1/+4
The bulk of __dquot_initialize runs under the dqptr_sem which protects the inode->i_dquot pointers. It doesn't protect the dereferenced contents, though. Those are protected by the dq_data_lock, which is missing around the dquot_resv_space call. Signed-off-by: Jeff Mahoney <jeffm@suse.com> Signed-off-by: Jan Kara <jack@suse.cz>
2012-12-13quota: Use the pre-processor to compile out quotactl_cmd_write when ↵Lee Jones1-0/+4
!CONFIG_BLOCK quotactl_cmd_write() is only ever invoked when BLOCK is configured. When !CONFIG_BLOCK, the build warning below is displayed. Let's fix that. fs/quota/quota.c:311:12: warning: ‘quotactl_cmd_write’ defined but not used [-Wunused-function] Cc: Jan Kara <jack@suse.cz> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jan Kara <jack@suse.cz>
2012-10-16Merge branch 'for_linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull ext2, ext3, quota fixes from Jan Kara: "Fix three regressions caused by user namespace conversions (ext2, ext3, quota) and minor ext3 fix and cleanup." * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: quota: Silence warning about PRJQUOTA not being handled in need_print_warning() ext3: fix return values on parse_options() failure ext2: fix return values on parse_options() failure ext3: ext3_bread usage audit ext3: fix possible non-initialized variable on htree_dirblock_to_tree()
2012-10-12vfs: define struct filename and have getname() return itJeff Layton1-2/+2
getname() is intended to copy pathname strings from userspace into a kernel buffer. The result is just a string in kernel space. It would however be quite helpful to be able to attach some ancillary info to the string. For instance, we could attach some audit-related info to reduce the amount of audit-related processing needed. When auditing is enabled, we could also call getname() on the string more than once and not need to recopy it from userspace. This patchset converts the getname()/putname() interfaces to return a struct instead of a string. For now, the struct just tracks the string in kernel space and the original userland pointer for it. Later, we'll add other information to the struct as it becomes convenient. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-09quota: Silence warning about PRJQUOTA not being handled in need_print_warning()Jan Kara1-0/+2
PRJQUOTA value of quota type should never reach need_print_warning() since XFS (which is the only fs which uses that type) doesn't use generic functions calling this function. Anyway, add PRJQUOTA case to the switch to make gcc happy. Signed-off-by: Jan Kara <jack@suse.cz>
2012-10-02Merge branch 'for-linus' of ↵Linus Torvalds8-93/+253
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull user namespace changes from Eric Biederman: "This is a mostly modest set of changes to enable basic user namespace support. This allows the code to code to compile with user namespaces enabled and removes the assumption there is only the initial user namespace. Everything is converted except for the most complex of the filesystems: autofs4, 9p, afs, ceph, cifs, coda, fuse, gfs2, ncpfs, nfs, ocfs2 and xfs as those patches need a bit more review. The strategy is to push kuid_t and kgid_t values are far down into subsystems and filesystems as reasonable. Leaving the make_kuid and from_kuid operations to happen at the edge of userspace, as the values come off the disk, and as the values come in from the network. Letting compile type incompatible compile errors (present when user namespaces are enabled) guide me to find the issues. The most tricky areas have been the places where we had an implicit union of uid and gid values and were storing them in an unsigned int. Those places were converted into explicit unions. I made certain to handle those places with simple trivial patches. Out of that work I discovered we have generic interfaces for storing quota by projid. I had never heard of the project identifiers before. Adding full user namespace support for project identifiers accounts for most of the code size growth in my git tree. Ultimately there will be work to relax privlige checks from "capable(FOO)" to "ns_capable(user_ns, FOO)" where it is safe allowing root in a user names to do those things that today we only forbid to non-root users because it will confuse suid root applications. While I was pushing kuid_t and kgid_t changes deep into the audit code I made a few other cleanups. I capitalized on the fact we process netlink messages in the context of the message sender. I removed usage of NETLINK_CRED, and started directly using current->tty. Some of these patches have also made it into maintainer trees, with no problems from identical code from different trees showing up in linux-next. After reading through all of this code I feel like I might be able to win a game of kernel trivial pursuit." Fix up some fairly trivial conflicts in netfilter uid/git logging code. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (107 commits) userns: Convert the ufs filesystem to use kuid/kgid where appropriate userns: Convert the udf filesystem to use kuid/kgid where appropriate userns: Convert ubifs to use kuid/kgid userns: Convert squashfs to use kuid/kgid where appropriate userns: Convert reiserfs to use kuid and kgid where appropriate userns: Convert jfs to use kuid/kgid where appropriate userns: Convert jffs2 to use kuid and kgid where appropriate userns: Convert hpfs to use kuid and kgid where appropriate userns: Convert btrfs to use kuid/kgid where appropriate userns: Convert bfs to use kuid/kgid where appropriate userns: Convert affs to use kuid/kgid wherwe appropriate userns: On alpha modify linux_to_osf_stat to use convert from kuids and kgids userns: On ia64 deal with current_uid and current_gid being kuid and kgid userns: On ppc convert current_uid from a kuid before printing. userns: Convert s390 getting uid and gid system calls to use kuid and kgid userns: Convert s390 hypfs to use kuid and kgid where appropriate userns: Convert binder ipc to use kuids userns: Teach security_path_chown to take kuids and kgids userns: Add user namespace support to IMA userns: Convert EVM to deal with kuids and kgids in it's hmac computation ...
2012-09-18userns: Convert quotaEric W. Biederman1-15/+14
Now that the type changes are done, here is the final set of changes to make the quota code work when user namespaces are enabled. Small cleanups and fixes to make the code build when user namespaces are enabled. Cc: Jan Kara <jack@suse.cz> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-09-18userns: Convert struct dquot_warnEric W. Biederman1-9/+7
Convert w_dq_id to be a struct kquid and remove the now unncessary w_dq_type. This is a simple conversion and enough other places have already been converted that this actually reduces the code complexity by a little bit, when removing now unnecessary type conversions. Cc: Jan Kara <jack@suse.cz> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-09-18userns: Convert struct dquot dq_id to be a struct kqidEric W. Biederman4-56/+67
Change struct dquot dq_id to a struct kqid and remove the now unecessary dq_type. Make minimal changes to dquot, quota_tree, quota_v1, quota_v2, ext3, ext4, and ocfs2 to deal with the change in quota structures and signatures. The ocfs2 changes are larger than most because of the extensive tracing throughout the ocfs2 quota code that prints out dq_id. quota_tree.c:get_index is modified to take a struct kqid instead of a qid_t because all of it's callers pass in dquot->dq_id and it allows me to introduce only a single conversion. The rest of the changes are either just replacing dq_type with dq_id.type, adding conversions to deal with the change in type and occassionally adding qid_eq to allow quota id comparisons in a user namespace safe way. Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jan Kara <jack@suse.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Theodore Tso <tytso@mit.edu> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-09-18userns: Modify dqget to take struct kqidEric W. Biederman1-9/+11
Modify dqget to take struct kqid instead of a type and an identifier pair. Modify the callers of dqget in ocfs2 and dquot to take generate a struct kqid so they can continue to call dqget. The conversion to create struct kqid should all be the final conversions that are needed in those code paths. Cc: Jan Kara <jack@suse.cz> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-09-18userns: Convert quota netlink aka quota_send_warningEric W. Biederman2-5/+7
Modify quota_send_warning to take struct kqid instead a type and identifier pair. When sending netlink broadcasts always convert uids and quota identifiers into the intial user namespace. There is as yet no way to send a netlink broadcast message with different contents to receivers in different namespaces, so for the time being just map all of the identifiers into the initial user namespace which preserves the current behavior. Change the callers of quota_send_warning in gfs2, xfs and dquot to generate a struct kqid to pass to quota send warning. When all of the user namespaces convesions are complete a struct kqid values will be availbe without need for conversion, but a conversion is needed now to avoid needing to convert everything at once. Cc: Ben Myers <bpm@sgi.com> Cc: Alex Elder <elder@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Jan Kara <jack@suse.cz> Cc: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-09-18userns: Convert qutoactlEric W. Biederman2-10/+26
Update the quotactl user space interface to successfull compile with user namespaces support enabled and to hand off quota identifiers to lower layers of the kernel in struct kqid instead of type and qid pairs. The quota on function is not converted because while it takes a quota type and an id. The id is the on disk quota format to use, which is something completely different. The signature of two struct quotactl_ops methods were changed to take struct kqid argumetns get_dqblk and set_dqblk. The dquot, xfs, and ocfs2 implementations of get_dqblk and set_dqblk are minimally changed so that the code continues to work with the change in parameter type. This is the first in a series of changes to always store quota identifiers in the kernel in struct kqid and only use raw type and qid values when interacting with on disk structures or userspace. Always using struct kqid internally makes it hard to miss places that need conversion to or from the kernel internal values. Cc: Jan Kara <jack@suse.cz> Cc: Dave Chinner <david@fromorbit.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Ben Myers <bpm@sgi.com> Cc: Alex Elder <elder@kernel.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-09-18userns: Implement struct kqidEric W. Biederman2-1/+133
Add the data type struct kqid which holds the kernel internal form of the owning identifier of a quota. struct kqid is a replacement for the implicit union of uid, gid and project id stored in an unsigned int and the quota type field that is was used in the quota data structures. Making the data type explicit allows the kuid_t and kgid_t type safety to propogate more thoroughly through the code, revealing more places where uid/gid conversions need be made. Along with the data type struct kqid comes the helper functions qid_eq, qid_lt, from_kqid, from_kqid_munged, qid_valid, make_kqid, make_kqid_invalid, make_kqid_uid, make_kqid_gid. Cc: Jan Kara <jack@suse.cz> Cc: Dave Chinner <david@fromorbit.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-08-15quota: Move down dqptr_sem read after initializing default warn[] type at ↵Jeff Liu1-1/+1
__dquot_alloc_space(). sb->s_dqopt->dqptr_sem is used to serialize ops using pointers from inode to dquots. But for __dquot_alloc_space(), it could be safely moved down after the default warn[] array got initialized. Signed-off-by: Jie Liu <jeff.liu@oracle.com> Signed-off-by: Jan Kara <jack@suse.cz>
2012-07-24Merge branch 'for_linus' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull misc udf, ext2, ext3, and isofs fixes from Jan Kara: "Assorted, mostly trivial, fixes for udf, ext2, ext3, and isofs. I'm on vacation and scarcely checking email since we are expecting baby any day now but these fixes should be safe to go in and I don't want to delay them unnecessarily." * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: avoid info leak on export isofs: avoid info leak on export udf: Improve table length check to avoid possible overflow ext3: Check return value of blkdev_issue_flush() jbd: Check return value of blkdev_issue_flush() udf: Do not decrement i_blocks when freeing indirect extent block udf: Fix memory leak when mounting ext2: cleanup the confused goto label UDF: Remove unnecessary variable "offset" from udf_fill_inode udf: stop using s_dirt ext3: force ro mount if ext3_setup_super() fails quota: fix checkpatch.pl warning by replacing <asm/uaccess.h> with <linux/uaccess.h>
2012-07-22quota: Split dquot_quota_sync() to writeback and cache flushing partJan Kara2-5/+23
Split off part of dquot_quota_sync() which writes dquots into a quota file to a separate function. In the next patch we will use the function from filesystems and we do not want to abuse ->quota_sync quotactl callback more than necessary. Acked-by: Steven Whitehouse <swhiteho@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-07-09quota: fix checkpatch.pl warning by replacing <asm/uaccess.h> with ↵Jeff Liu2-2/+2
<linux/uaccess.h> checkpatch.pl warns: "WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h>" Below patch fixes it. Signed-off-by: Jie Liu <jeff.liu@oracle.com> Signed-off-by: Jan Kara <jack@suse.cz>
2012-05-15quota: Get rid of nested I_MUTEX_QUOTA locking subclassJan Kara1-8/+6
So far i_mutex was ranking above dqonoff_mutex and i_mutex on quota files was special and ranking below dqonoff_mutex (and several other locks). However there's no real need for i_mutex on quota files to be special. IO on quota files is serialized by dqio_mutex anyway so we don't need to take i_mutex when writing to quota files. Other places where we take i_mutex on quota file can accomodate standard i_mutex lock ranking, we only need to change the lock ranking to be dqonoff_mutex > i_mutex which is a matter of changing documentation because there's no place which would enforce ordering in the other direction. Signed-off-by: Jan Kara <jack@suse.cz>
2012-05-15quota: Use precomputed value of sb_dqopt in dquot_quota_syncJan Kara1-6/+6
Signed-off-by: Jan Kara <jack@suse.cz>
2012-05-15quota: Fix double lock in add_dquot_ref() with CONFIG_QUOTA_DEBUGJan Kara1-4/+4
When CONFIG_QUOTA_DEBUG is enabled we call inode_get_rsv_space() from add_dquot_ref() while holding i_lock. But inode_get_rsv_space() is trying to get i_lock as well resulting in double lock. Fix the problem by moving inode_get_rsv_space() call out of i_lock. Reported-and-analyzed-by: Jie Liu <jeff.liu@oracle.com> Signed-off-by: Jan Kara <jack@suse.cz>
2012-03-28Merge branch 'for_linus' of ↵Linus Torvalds1-76/+113
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull ext3, UDF, and quota fixes from Jan Kara: "A couple of ext3 & UDF fixes and also one improvement in quota locking." * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: ext3: fix start and len arguments handling in ext3_trim_fs() udf: Fix deadlock in udf_release_file() udf: Fix file entry logicalBlocksRecorded udf: Fix handling of i_blocks quota: Make quota code not call tty layer with dqptr_sem held udf: Init/maintain file entry checkpoint field ext3: Update ctime in ext3_splice_branch() only when needed ext3: Don't call dquot_free_block() if we don't update anything udf: Remove unnecessary OOM messages
2012-03-23Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfsLinus Torvalds1-2/+1
Pull XFS updates from Ben Myers: "Scalability improvements for dquots, log grant code cleanups, plus bugfixes and cleanups large and small" Fix up various trivial conflicts that were due to some of the earlier patches already having been integrated into v3.3 as bugfixes, and then there were development patches on top of those. Easily merged by just taking the newer version from the pulled branch. * 'for-linus' of git://oss.sgi.com/xfs/xfs: (45 commits) xfs: fallback to vmalloc for large buffers in xfs_getbmap xfs: fallback to vmalloc for large buffers in xfs_attrmulti_attr_get xfs: remove remaining scraps of struct xfs_iomap xfs: fix inode lookup race xfs: clean up minor sparse warnings xfs: remove the global xfs_Gqm structure xfs: remove the per-filesystem list of dquots xfs: use per-filesystem radix trees for dquot lookup xfs: per-filesystem dquot LRU lists xfs: use common code for quota statistics xfs: reimplement fdatasync support xfs: split in-core and on-disk inode log item fields xfs: make xfs_inode_item_size idempotent xfs: log timestamp updates xfs: log file size updates at I/O completion time xfs: log file size updates as part of unwritten extent conversion xfs: do not require an ioend for new EOF calculation xfs: use per-filesystem I/O completion workqueues quota: make Q_XQUOTASYNC a noop xfs: include reservations in quota reporting ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-21 23:40:17 +0000