summaryrefslogtreecommitdiff
path: root/drivers/net/wireless/b43
AgeCommit message (Collapse)AuthorFilesLines
2014-07-18b43: N-PHY: fix channel switching with 2 GHz radio 0x2057Rafał Miłecki1-6/+6
Values were written to wrong registers. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15b43: N-PHY: add missing TX gain table for radio 0x2057 rev 5Rafał Miłecki1-8/+50
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15b43: don't warn about no 5 GHz support on 2.4 GHz devicesRafał Miłecki1-8/+10
This could be a bit confusing to see warning about lacking support for 5 GHz band if your device supports 2.4 GHz only. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15b43: enable radio 0x2057 rev 9 (AKA BCM43228) supportRafał Miłecki1-2/+22
Support for N-PHY rev 8 with 0x2057 rev 5 is almost ready, but we still need to figure out how to handle rev 9 first. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15b43: N-PHY: implement channel switching of radio 0x2057 rev 5Rafał Miłecki1-0/+129
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15b43: N-PHY: init and channel switching of radio 0x2057 rev 9Rafał Miłecki2-1/+234
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15b43; N-PHY: write most of the missing code for revs 7+Rafał Miłecki4-39/+290
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15b43: N-PHY: add placeholders for new devices supportRafał Miłecki1-54/+231
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15b43: N-PHY: add TX gain tables for devices with specific EPARafał Miłecki1-2/+72
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15b43: N-PHY: drop reg 0x1 access restriction on new PHY revsRafał Miłecki1-2/+2
Initialization of N-PHY radio revs 5 and 7 requires writing to 0x1. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-15b43: always print info about radio (manuf, id, revision)Rafał Miłecki1-4/+4
Type of radio has a major meaning for the driver. There is quite some code that does initialization/calibration depending on the radio rev. Knowing radio params is quite important to provide help to users, so print it even with debugging disabled. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-10Merge branch 'master' of ↵John W. Linville3-4/+9
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2014-07-07b43: fix reading info about radio for new devices (cores 40 & 42)Rafał Miłecki1-1/+10
This changes b43-phy0: Found Radio: Manuf 0x17F, Version 0x7769, Revision 4 to the b43-phy0: Found Radio: Manuf 0x17F, Version 0x2069, Revision 4 which matches what closed source driver reports: $ wl revinfo radiorev 0x42069000 Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-07b43: N-PHY: add TX gains tables for radio 0x2057 rev 9Rafał Miłecki1-0/+78
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-07b43: N-PHY: rework names & picking of TX gain tablesRafał Miłecki2-30/+84
This allows adding more revisions support, spotting lacking tables and unifies naming schema. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-07b43: N-PHY: initialize hardware tables on new devicesRafał Miłecki2-11/+281
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-01b43: add more bcma coresRafał Miłecki1-0/+12
This adds some cores with 0x2057 radio which will be supported soon as well as core 40 that I missed in the earlier firmware patch. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-01b43: N-PHY: complete generic support for 0x2057 radioRafał Miłecki3-20/+282
It doesn't include any device (radio revision) specific code yet, so it isn't really usable. As the commit says, it's just some generic code. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-01b43: N-PHY: fixes for radio 0x2057Rafał Miłecki2-22/+61
Enable initialization and update calibration code to fix: b43-phy0 ERROR: Radio 0x2057 rcal timeout b43-phy0 debug: Radio 0x2057 rccal timeout b43-phy0 debug: Radio 0x2057 rccal timeout b43-phy0 ERROR: Radio 0x2057 rcal timeout Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-01b43: treat LCNXN-PHY as extra N-PHY devicesRafał Miłecki1-0/+7
LCNXN is simply a continuation of N, e.g. code handling LCNXN revs 0 and 1 is mostly the same as for N-PHY revs 7+. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-25b43: b43_phyops_a can be staticFengguang Wu1-1/+1
CC: "Rafał Miłecki" <zajec5@gmail.com> CC: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-25b43: update list and code making a selection of firmware filesRafał Miłecki1-99/+125
Clean ucode selection, fix choice of firmware for LCN, drop some goto-s, add new devices. Tested on 14e4:4312, 14e4:4315, 14e4:4328, 14e4:432b, 14e4:4353. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-25b43: N-PHY: update low-pass filter setupRafał Miłecki1-12/+19
Add support for external PA and clean code a bit. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-25b43: N-PHY: update code for sending sample toneRafał Miłecki1-19/+17
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-20b43: add config for (en|dis)abling G-PHY supportRafał Miłecki4-5/+14
This allows new devices users to save some space. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-20b43: remove leftover code from old devices supportRafał Miłecki3-16/+0
Old devices (A-PHY or B-PHY) are supposed to be supported by b43legacy. We keep phy_a.c as it's needed for G-PHY which shares some design. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19b43: PHY: drop channel_type (we can get this info from chandef)Rafał Miłecki4-14/+8
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19b43: PHY: drop is_40mhz (get width info from chandef)Rafał Miłecki4-35/+33
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19b43: PHY: drop own channel_freq (get it from chandef when needed)Rafał Miłecki3-12/+15
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19b43: store current channel using struct cfg80211_chan_defRafał Miłecki3-2/+9
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19b43: b43_op_config: set channel info before switching bandRafał Miłecki2-2/+2
Band switching code needs to know what channel we switch to. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19b43: PHY: don't force default channel during initRafał Miłecki1-4/+3
PHY may need to be re-initialized during runtime (e.g. on band switch). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19b43: b43_op_config: use IEEE80211_CONF_CHANGE_CHANNELRafał Miłecki1-15/+16
This is tiny optimization and grouping band/channel ops. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19b43: b43_op_config: drop check for core changeRafał Miłecki1-18/+2
There aren't devices with multiple 802.11 cores supported by b43. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-19b43: drop B43_DEFAULT_CHANNELRafał Miłecki2-7/+0
It was never used, b43_switch_channel is always called with hw_value (from mac80211) or whatever get_default_chan returns. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-17b43: fix frequency reported on G-PHY with /new/ firmwareRafał Miłecki1-3/+7
Support for firmware rev 508+ was added years ago, but we never noticed it reports channel in a different way for G-PHY devices. Instead of offset from 2400 MHz it simply passes channel id (AKA hw_value). So far it was (most probably) affecting monitor mode users only, but the following recent commit made it noticeable for quite everybody: commit 3afc2167f60a327a2c1e1e2600ef209a3c2b75b7 Author: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Date: Tue Mar 4 16:50:13 2014 +0200 cfg80211/mac80211: ignore signal if the frame was heard on wrong channel Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: stable@vger.kernel.org Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-16b43: fix typo in Kconfig (make B43_BUSES_BCMA_AND_SSB the default for real)Rafał Miłecki1-1/+1
Reported-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-06-16b43: disable 5 GHz on G-PHYRafał Miłecki1-0/+1
This fixes regression introduced by adding some G-PHY devices to the list of dual band devices. There is simply no support for 5 GHz on G-PHY devices in b43. It results in: WARNING: CPU: 0 PID: 79 at drivers/net/wireless/b43/phy_g.c:75 b43_gphy_channel_switch+0x125/0x130 [b43]() b43-phy1 ERROR: PHY init: Channel switch to default failed Regression was introduced by the following commit: commit 773cfc508f4d64c14547ff8751b5cbd473124364 Author: Rafał Miłecki <zajec5@gmail.com> Date: Mon May 19 23:18:55 2014 +0200 b43: add more devices to the bands database Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-29b43: N-PHY: optimize radio switching on/offRafał Miłecki2-3/+7
Broadcom's wl 6.30.223.141 has some optimizations for radios 0x205[67]. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-29b43: N-PHY: optimize init by doing some ops just onceRafał Miłecki3-48/+44
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-29b43: PHY: allow init optimizations by tracking PHY stateRafał Miłecki3-0/+11
PHY has to be often re-initialized (e.g. during band switching after PHY reset), however some operations have to be performed only once (only power reset affects them). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22b43: N-PHY: add missing calib values for radio 0x2026 rev 11Rafał Miłecki1-0/+918
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22b43: fix list of 5 GHz channels for 802.11n cardsRafał Miłecki1-12/+22
Broadcom hardware uses a bit tricky hw_value-s for 5 GHz channels, values 184-228 are used for 4920-5140 MHz center frequencies. Normally you expect channels 7-16 (e.g. 5060 MHz is channel 12, not 212). We never meant to register hw_value 228 with freq 6140 MHz (5000 + 228 * 5). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-22b43: fix typo in define name for 2 GHz channels (s/CHAN4G/CHAN2G/)Rafał Miłecki1-16/+16
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-20b43: xmit: set 5 GHz bit depending on current bandRafał Miłecki2-2/+2
PHYs other than A may also work in 5 GHz mode. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-20b43: add more devices to the bands databaseRafał Miłecki1-0/+32
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-20b43: move bands detection to a separated functionRafał Miłecki1-42/+56
This cleans code a bit and allows adding support for more devices. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-19b43: make B43_PCMCIA and B43_SDIO depend on B43_SSBRafał Miłecki1-2/+2
These are extra configs specific to the SSB. Lack of this dependency and CONFIG_B43=y CONFIG_B43_BUSES_BCMA=y CONFIG_SSB=m would result in: > drivers/built-in.o: In function `b43_sdio_remove': > sdio.c:(.text+0x14657f): undefined reference to `ssb_bus_unregister' > drivers/built-in.o: In function `b43_sdio_probe': > sdio.c:(.text+0x14672f): undefined reference to `ssb_bus_sdiobus_register' Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-19b43: rework band switchingRafał Miłecki2-60/+45
We always operate on one core and simple band switch doesn't require full core reset. Simply reset the PHY. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-05-19b43: complete PHY resetRafał Miłecki3-32/+61
Use separated function for taking PHY out of reset and implement reset for BCMA. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-20 06:49:35 +0000