summaryrefslogtreecommitdiff
path: root/drivers/clk
AgeCommit message (Collapse)AuthorFilesLines
2014-01-14clk: shmobile: Fix MSTP clock indexValentine Barshak1-2/+2
Use clkidx when registering MSTP clocks instead of loop counter since the value is then used to access the specific clock index bit in the mstp register. The issue was introduced by the following commit: f94859c215b6d977 "clk: shmobile: Add MSTP clock support" Changes in V2: * none Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-08Merge tag 'for_3.14/samsung-clk' of ↵Mike Turquette5-1162/+1284
git://git.kernel.org/pub/scm/linux/kernel/git/tfiga/samsung-clk into clk-next-samsung (A bit late) first round of Samsung clock patches for v3.14.
2014-01-08clk: max77686: Register OF clock providerTomasz Figa1-0/+24
If max77686 chip is instantiated from device tree, it is desirable to have an OF clock provider to allow device tree based look-up of clocks. This patch adds OF clock provider registration to the clk-max77686 driver. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-08clk: max77686: Refactor driver data handlingTomasz Figa1-13/+14
As a prerequisite for further patch adding OF clock provider support to the driver, this patch changes the driver to store an array of struct clk * as driver data. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-08clk: max77686: Fix clean-up in error and remove pathsTomasz Figa1-19/+10
This patch fixes invalid kfree() and adds missing call to clk_unregister() in error and remove paths in max77686_clk_probe(). While at it, error handling is also cleaned up. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-08clk: max77686: Make max77686_clk_register() return struct clk *Tomasz Figa1-7/+10
As a preparation for further patches, this patch modifies the clock registration helper function to return a pointer to the newly registered clock. No functional change is done to the driver. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-08clk: max77686: Refactor successful exit of probe functionTomasz Figa1-2/+1
The function can simply return 0, without jumping to a separate label, which does exactly the same. This patch does not introduce any functional change, just a clean-up. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-08clk: max77686: Provide .recalc_rate() operationTomasz Figa1-0/+7
It is usually nice to know frequency of a clock, so this patch adds a .recalc_rate() callback returning rates of provided clocks. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-08clk: max77686: Correct callback used for checking clock statusTomasz Figa1-2/+2
Changing status of clock gates in max77686 requires i2c transfers, which can sleep, so this is done in prepare and unprepare callbacks. Due to this, checking whether whether the clock is ungated must be done in is_prepared() callback as well, for consistency. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-08clk: exynos-audss: add support for Exynos 5420Andrew Bresticker1-7/+33
The AudioSS block on Exynos 5420 has an additional clock gate for the ADMA bus clock. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Acked-by: Mike Turquette <mturquette@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-01-08clk: exynos5250: add clock ID for div_pcm0Andrew Bresticker1-1/+1
There is no gate for the PCM clock input to the AudioSS block, so the parent of sclk_pcm is div_pcm0. Add a clock ID for it so that we can reference it in device trees. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Acked-by: Mike Turquette <mturquette@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-01-08clk: exynos-audss: allow input clocks to be specified in device treeAndrew Bresticker1-5/+20
This allows the input clocks to the Exynos AudioSS block to be specified via device-tree bindings. Default names will be used when an input clock is not given. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Acked-by: Mike Turquette <mturquette@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-01-08clk: exynos-audss: convert to platform deviceAndrew Bresticker1-16/+88
The Exynos AudioSS clock controller will later be modified to allow input clocks to be specified via device-tree in order to support multiple Exynos SoCs. This will introduce a dependency on the core SoC clock controller being initialized first so that the AudioSS driver can look up its input clocks, but the order in which clock providers are probed in of_clk_init() is not guaranteed. Since deferred probing is not supported in of_clk_init() and the AudioSS block is not the core controller, we can initialize it later as a platform device. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Acked-by: Tomasz Figa <t.figa@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Mike Turquette <mturquette@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-01-08clk: exynos5440: replace clock ID private enums with IDs from DT headerAndrzej Hajda1-47/+34
The patch replaces private enum clock IDs in the driver with macros provided by the DT header. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Mike Turquette <mturquette@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-01-08clk: exynos5420: replace clock ID private enums with IDs from DT headerAndrzej Hajda1-339/+309
The patch replaces private enum clock IDs in the driver with macros provided by the DT header. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Mike Turquette <mturquette@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-01-08clk: exynos5250: replace clock ID private enums with IDs from DT headerAndrzej Hajda1-295/+264
The patch replaces private enum clock IDs in the driver with macros provided by the DT header. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Mike Turquette <mturquette@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-01-08clk: exynos4: replace clock ID private enums with IDs from DT headerAndrzej Hajda1-455/+402
The patch replaces private enum clock IDs in the driver with macros provided by the DT header. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Mike Turquette <mturquette@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-01-08clk: exynos5250: register APLL rate tableAndrew Bresticker1-1/+24
Register the APLL rate table so that we can set the APLL rate from the cpufreq driver. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-01-08clk: clk-divider: fix divisor > 255 bugJames Hogan1-1/+1
Commit 6d9252bd9a4bb (clk: Add support for power of two type dividers) merged in v3.6 added the _get_val function to convert a divisor value to a register field value depending on the flags. However it used the type u8 for the div field, causing divisors larger than 255 to be masked and the resultant clock rate to be too high. E.g. in my case an 11bit divider was supposed to divide 24.576 MHz down to 32.768KHz. The divisor was correctly calculated as 750 (0x2ee). This was masked to 238 (0xee) resulting in a frequency of 103.26KHz. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: linux-arm-kernel@lists.infradead.org Cc: stable@vger.kernel.org Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-01-05Merge tag 'samsung-clk-fixes' of ↵Mike Turquette3-11/+15
git://git.kernel.org/pub/scm/linux/kernel/git/tfiga/samsung-clk into clk-fixes Samsung Clock fixes for 3.13-rc7 * Several patches fixing up incorrectly defined register addresses and bitfield offsets that could lead to undefined operation when accessing respective registers or bitfields. 1) clk: exynos5250: fix sysmmu_mfc{l,r} gate clocks 2a) clk: samsung: exynos5250: Fix ACP gate register offset 2b) clk: samsung: exynos5250: Add MDMA0 clocks 2c) ARM: dts: exynos5250: Fix MDMA0 clock number 3) clk: samsung: exynos4: Correct SRC_MFC register All three issues have been present since Exynos5250 and Exynos4 clock drivers were added by commits 6e3ad26816b72 ("clk: exynos5250: register clocks using common clock framework") and e062b571777f5 ("clk: exynos4: register clocks using common clock framework") respectively. * Patch to fix automatic disabling of Exynos5250 sysreg clock that could cause undefined operation of several peripherals, such as USB, I2C, MIPI or display block. 4) clk: samsung: exynos5250: Add CLK_IGNORE_UNUSED flag for the sysreg clock Present since Exynos5250 clock drivers was added by commits 6e3ad26816b72 ("clk: exynos5250: register clocks using common clock framework"). * Patch fixing compilation warning in clk-exynos-audss driver when CONFIG_PM_SLEEP is disabled. 5) clk: exynos: File scope reg_save array should depend on PM_SLEEP Present since the driver was added by commit 1241ef94ccc3 ("clk: samsung: register audio subsystem clocks using common clock framework").
2014-01-03Merge tag 'integrator-for-v3.14' of ↵Olof Johansson5-20/+80
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/drivers From Linus Walleij: Some Integrator patches that matured for v3.14: - Use PATCH_PHYS_TO_VIRT and AUTO_ZRELADDR. - Support cascaded interrupts on the SIC. - Complete clock implementation for the IM-PD1. * tag 'integrator-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator: clk: versatile: fixup IM-PD1 clock implementation clk: versatile: pass a name to ICST clock provider ARM: integrator: pass parent IRQ to the SIC irqchip: versatile FPGA: support cascaded interrupts from DT ARM: integrator: Default enable ARM_PATCH_PHYS_VIRT, AUTO_ZRELADDR Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-03Merge tag 'renesas-dt3-for-v3.14' of ↵Olof Johansson5-0/+720
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt From Simon Horman: Third Round of Renesas ARM Based SoC DT Updates for v3.14 * r8a7791 (R-Car M2) and r8a7790 (R-Car H2) SoCSs - Add SSI, QSPI and MSIOF clocks in device tree r8a7791 (R-Car M2) based Koelsch and r8a7790 (R-Car H2) based Lager boards - Remove reference DTS - Specify external clock frequency in DT - Sync non-reference DTS with referene DTS - Add clocks to DTS * r8a7740 (R-Mobile A1) based Armadillo board - Add gpio-keys device - Add PWM backlight enable GPIO - Add PWM backlight power supply * r8a73a0 (SH-Mobile AG5), r8a7740 (R-Mobile A1) and r8a73a4 (SH-Mobile APE6) SoCs - Specify PFC interrupts in DT * tag 'renesas-dt3-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (72 commits) ARM: shmobile: r8a7791: Add SSI clocks in device tree ARM: shmobile: r8a7790: Add SSI clocks in device tree ARM: shmobile: r8a7791: Add QSPI module clock in device tree ARM: shmobile: r8a7790: Add QSPI module clock in device tree ARM: shmobile: r8a7791: Add MSIOF clocks in device tree ARM: shmobile: r8a7790: Add MSIOF clocks in device tree ARM: shmobile: Remove Koelsch reference DTS ARM: shmobile: Remove Lager reference DTS ARM: shmobile: koelsch: Specify external clock frequency in DT ARM: shmobile: lager: Specify external clock frequency in DT ARM: shmobile: Sync Koelsch DTS with Koelsch reference DTS ARM: shmobile: Sync Lager DTS with Lager reference DTS ARM: shmobile: r8a7791: Add clocks ARM: shmobile: r8a7790: Reference clocks ARM: shmobile: r8a7790: Add clocks ARM: shmobile: armadillo: dts: Add gpio-keys device ARM: shmobile: sh73a0: Specify PFC interrupts in DT ARM: shmobile: r8a7740: Specify PFC interrupts in DT ARM: shmobile: r8a73a4: Specify PFC interrupts in DT ARM: shmobile: armadillo: dts: Add PWM backlight enable GPIO ... Signed-off-by: Olof Johansson <olof@lixom.net>
2014-01-03clk: versatile: fixup IM-PD1 clock implementationLinus Walleij1-15/+71
Register both VCO clocks, give per-logical module unique names to the clocks so we can have several IM-PD1's connected (in theory). Implement all the fixed-factor clocks as children of VCO2. Tested by using the UARTs and the PL181 MMC block on the IM-PD1, works flawlessly. Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-03clk: versatile: pass a name to ICST clock providerLinus Walleij5-6/+10
When we have more than one of these clocks in a system (such as on the IM-PD1) we need a mechanism to pass a name for the clock. Refactor to add this as an argument. Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-01-02Merge remote-tracking branches 'asoc/topic/ad1836', 'asoc/topic/ad193x', ↵Mark Brown1-2/+2
'asoc/topic/adav80x', 'asoc/topic/adsp', 'asoc/topic/ak4641', 'asoc/topic/ak4642', 'asoc/topic/arizona', 'asoc/topic/atmel', 'asoc/topic/au1x', 'asoc/topic/axi', 'asoc/topic/bcm2835', 'asoc/topic/blackfin', 'asoc/topic/cs4271', 'asoc/topic/cs42l52', 'asoc/topic/da7210', 'asoc/topic/davinci', 'asoc/topic/ep93xx', 'asoc/topic/fsl', 'asoc/topic/fsl-mxs', 'asoc/topic/generic', 'asoc/topic/hdmi', 'asoc/topic/jack', 'asoc/topic/jz4740', 'asoc/topic/max98090', 'asoc/topic/mxs', 'asoc/topic/omap', 'asoc/topic/pxa', 'asoc/topic/rcar', 'asoc/topic/s6000', 'asoc/topic/sai', 'asoc/topic/samsung', 'asoc/topic/sgtl5000', 'asoc/topic/spear', 'asoc/topic/ssm2518', 'asoc/topic/ssm2602', 'asoc/topic/tegra', 'asoc/topic/tlv320aic3x', 'asoc/topic/twl6040', 'asoc/topic/txx9', 'asoc/topic/uda1380', 'asoc/topic/width', 'asoc/topic/wm8510', 'asoc/topic/wm8523', 'asoc/topic/wm8580', 'asoc/topic/wm8711', 'asoc/topic/wm8728', 'asoc/topic/wm8731', 'asoc/topic/wm8741', 'asoc/topic/wm8750', 'asoc/topic/wm8753', 'asoc/topic/wm8776', 'asoc/topic/wm8804', 'asoc/topic/wm8900', 'asoc/topic/wm8901', 'asoc/topic/wm8940', 'asoc/topic/wm8962', 'asoc/topic/wm8974', 'asoc/topic/wm8985', 'asoc/topic/wm8988', 'asoc/topic/wm8990', 'asoc/topic/wm8991', 'asoc/topic/wm8994', 'asoc/topic/wm8995', 'asoc/topic/wm9081' and 'asoc/topic/x86' into asoc-next
2013-12-31Merge branch 'clk-next-unregister' into clk-nextMike Turquette3-13/+200
Conflicts: drivers/clk/clk.c
2013-12-30Merge branch 'for_3.14/keystone-clk' of ↵Mike Turquette2-8/+28
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into clk-next-keystone
2013-12-30clk: exynos5250: Add CLK_SET_RATE_PARENT flag to mout_apllSachin Kamat1-1/+2
Add CLK_SET_RATE_PARENT flag to mout_apll clock. This will let us set the clock rate in the cpufreq driver. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2013-12-30clk: samsung: exynos5250: Fix parents of gate clocks from MFC domainTomasz Figa1-3/+5
This patch adds mout_aclk333_sub mux clock and updates gate clocks from MFC domain to have it as their parent as specified in SoC documentation. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Tested-by: Tomasz Figa <t.figa@samsung.com>
2013-12-30clk: samsung: exynos5250: Correct parent list of audio muxesTomasz Figa1-3/+3
According to SoC documentation, input 5 of mout_audio muxes is connected to xxti (named fin_pll in the driver). This patch corrects defined parent arrays to match SoC documentation. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Tested-by: Tomasz Figa <t.figa@samsung.com>
2013-12-30clk: samsung: exynos5250: Add missing unpopulated mux parentsTomasz Figa1-4/+12
This patch updates mux parent arrays with unpopulated mux inputs, as all inputs need to be specified in parent arrays passed to clk_register_mux(), otherwise clk_set_parent() can generate out of bound accesses to the array. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Tested-by: Tomasz Figa <t.figa@samsung.com>
2013-12-30clk: samsung: exynos5250: Fix parent of gate clocks from DISP1 domainTomasz Figa1-6/+8
This patch adds mux_aclk_200_disp1_sub mux clock, which according to SoC documentation is the correct parent of DISP1 gate clocks. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Tested-by: Tomasz Figa <t.figa@samsung.com>
2013-12-30clk: samsung: exynos5250: Fix parents of gate clocks from GSCL domainTomasz Figa1-8/+17
This patch adds mout_aclk266_gscl_sub mux clock and adjusts definitions of GSCL domain gate clocks to use it as their parent, as specified in SoC documentation. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Tested-by: Tomasz Figa <t.figa@samsung.com>
2013-12-30clk: samsung: exynos5250: Make names of mux and div clocks consistentTomasz Figa1-122/+123
This patch renames all mux clocks to start with mout_ prefix and all div clocks to start with div_ prefix for consistency with other clocks already defined this way. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Tested-by: Tomasz Figa <t.figa@samsung.com>
2013-12-30clk: samsung: exynos5250: Sort definitions by registers and bitfieldTomasz Figa1-102/+188
This patch reorders clock definitions, so they are sorted by register addresses and bitfield shifts. When at it, blank lines are added to separate definitions of clocks from different registers. Overall this should make the driver more readable and reduce the number of potential conflicts when adding new entries. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Tested-by: Tomasz Figa <t.figa@samsung.com>
2013-12-30Merge branch 'samsung-fixes' into samsung-next-baseTomasz Figa3-11/+15
2013-12-30clk: exynos: File scope reg_save array should depend on PM_SLEEPKrzysztof Kozlowski1-5/+5
Move reg_save[] into CONFIG_PM_SLEEP dependency block as it is used only by suspend and resume functions. This fixes the warning on CONFIG_PM_SLEEP=n: drivers/clk/samsung/clk-exynos-audss.c:29:22: warning: ‘reg_save’ defined but not used [-Wunused-variable] Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2013-12-30clk: samsung: exynos5250: Add CLK_IGNORE_UNUSED flag for the sysreg clockAbhilash Kesavan1-1/+2
The sysreg (system register) generates control signals for various blocks like disp1blk, i2c, mipi, usb etc. However, it gets disabled as an unused clock at boot-up. This can lead to failures in operation of above blocks, because they can not be configured properly if this clock is disabled. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Acked-by: Mike Turquette <mturquette@linaro.org> [t.figa: Updated patch description.] Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2013-12-30clk: samsung: exynos5250: Add MDMA0 clocksAbhilash Kesavan1-1/+4
Adds gate clock for MDMA0 on Exynos5250 SoC. This is needed to ensure that the clock is enabled when MDMA0 is used on systems on which firmware gates the clockby default. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Acked-by: Mike Turquette <mturquette@linaro.org> [t.figa: Updated patch description.] Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2013-12-30clk: samsung: exynos5250: Fix ACP gate register offsetAbhilash Kesavan1-1/+1
The CLK_GATE_IP_ACP register offset is incorrectly listed making definition of g2d clock incorrect, which may lead to system failures when trying to use G2D on systems on which firmware gates this clock by default. Fix this and the register ordering as well. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Acked-by: Mike Turquette <mturquette@linaro.org> [t.figa: Updated patch description.] Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2013-12-30clk: exynos5250: fix sysmmu_mfc{l,r} gate clocksAndrew Bresticker1-2/+2
The gate clocks for the MFC sysmmus appear to be flipped, i.e. GATE_IP_MFC[2] gates sysmmu_mfcl and GATE_IP_MFC[1] gates sysmmu_mfcr. Fix this so that the MFC will start up. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2013-12-30clk: samsung: exynos4: Correct SRC_MFC registerSeung-Woo Kim1-1/+1
The SRC_MFC register offset was incorrect, which could cause have caused wrong calculation of rate of sclk_mfc clock, that could in turn lead to incorrect operation of MFC. This patch corrects it. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Acked-by: Mike Turquette <mturquette@linaro.org> [t.figa: Updated patch description] Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2013-12-29Merge tag 'sunxi-clk-3.14-for-mike' of ↵Mike Turquette3-77/+437
https://bitbucket.org/emiliolopez/linux into clk-next-sunxi Allwinner sunXi SoCs clock changes This contains the clk driver parts of the "[PATCH v3 00/13] clk: sunxi: add PLL5 and PLL6 support" series. It adds support for PLL4/5/6 and mod0 clocks on most sunxi platforms. Additionally, it contains "[PATCH 1/4] clk: sunxi: Allwinner A20 output clock support" (v2) from Chen-Yu Tsai, which adds support for output clocks present on A20.
2013-12-28clk: sunxi: Allwinner A20 output clock supportChen-Yu Tsai1-0/+57
This patch adds support for the external clock outputs on the Allwinner A20 SoC. The clock outputs are similar to "module 0" type clocks, with different offsets and widths for clock factors. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Emilio López <emilio@elopez.com.ar>
2013-12-28clk: sunxi: support better factor DT nodesEmilio López1-0/+9
The DT nodes should look like abc_clk: clk@deadbeef { ... clock-output-names = "abc"; } But our old DT nodes look like abc: abc@deadbeef { ... } So, let's support both formats, until we can transition everything to the new, correct one. Signed-off-by: Emilio López <emilio@elopez.com.ar> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-12-28clk: sunxi: mod0 supportEmilio López1-0/+57
This commit implements support for the "module 0" type of clocks, as used by MMC, IR, NAND, SATA and other components. Signed-off-by: Emilio López <emilio@elopez.com.ar> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-12-28clk: sunxi: add PLL5 and PLL6 supportEmilio López1-0/+230
This commit implements PLL5 and PLL6 support on the sunxi clock driver. These PLLs use a similar factor clock, but differ on their outputs. Signed-off-by: Emilio López <emilio@elopez.com.ar> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-12-28clk: sunxi: make factors_clk_setup return the clock it registersEmilio López1-7/+8
We will be needing this to register a factor clock as parent with leaf divisors on a single call. Signed-off-by: Emilio López <emilio@elopez.com.ar> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-12-28clk: sunxi: add gating support to PLL1Emilio López1-0/+2
This commit adds gating support to PLL1 on the clock driver. This makes the PLL1 implementation fully compatible with PLL4 as well. Signed-off-by: Emilio López <emilio@elopez.com.ar> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-12-28clk: sunxi: clean the magic number of mux parentsEmilio López1-2/+3
This was pointed out during the review of the factor patches. Let's indicate what does that magic 5 mean. Signed-off-by: Emilio López <emilio@elopez.com.ar> Acked-by: Mike Turquette <mturquette@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-14 13:48:45 +0000