summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2014-04-25Merge tag 'locks-v3.15-2' of git://git.samba.org/jlayton/linuxLinus Torvalds1-3/+3
Pull file locking fixes from Jeff Layton: "File locking related bugfixes for v3.15 (pile #2) - fix for a long-standing bug in __break_lease that can cause soft lockups - renaming of file-private locks to "open file description" locks, and the command macros to more visually distinct names The fix for __break_lease is also in the pile of patches for which Bruce sent a pull request, but I assume that your merge procedure will handle that correctly. For the other patches, I don't like the fact that we need to rename this stuff at this late stage, but it should be settled now (hopefully)" * tag 'locks-v3.15-2' of git://git.samba.org/jlayton/linux: locks: rename FL_FILE_PVT and IS_FILE_PVT to use "*_OFDLCK" instead locks: rename file-private locks to "open file description locks" locks: allow __break_lease to sleep even when break_time is 0
2014-04-24Merge tag 'spi-v3.15-rc2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A few driver specific fixes here: - SH HSPI was dealing with its clocks incorrectly which meant it didn't work on some SoCs, fixing this also requires a small fix to one of the SoC clock trees to avoid breaking existing users. - The SiRF driver appears to have had several quality problems, it's fairly new and not widely used so this isn't too worrying. - A brute force fix for excessive locking in the Atmel driver, it needs further investigation but this deals with the immediate issue. - A build fix for the Blackfin driver" * tag 'spi-v3.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: atmel: Fix scheduling while atomic bug spi: sh-hspi: Do not specifically request shyway_clk clock ARM: shmobile: r8a7778: Use clks as MSTP007 parent spi: sirf: make GPIO chipselect function work well spi: sirf: set SPI controller in RISC IO chipselect mode spi: sirf: correct TXFIFO empty interrupt status bit spi: bfin5xx: fix build error
2014-04-24Merge branch 'fixes_for_v3.15' of ↵Linus Torvalds1-1/+1
git://git.linaro.org/people/mszyprowski/linux-dma-mapping Pull dma-mapping fix from Marek Szyprowski: "A small fix for dma-mapping subsystem for ARM" * 'fixes_for_v3.15' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: arm: dma-mapping: Fix mapping size value
2014-04-23Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds13-21/+44
Pull ARM fixes from Russell King: "Various fixes and post-merge window updates. Included here are: - ensure Kconfig things which should be sorted remain sorted - fix three big-endian bugs which crept in during the last merge window - add the renameat2 syscall - fix big.LITTLE switcher initialisation checks - fix kdump vmcore for LPAE kernels" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: add renameat2 syscall ARM: keep arch/arm/Kconfig and arch/arm/mm/Kconfig select entries sorted ARM: 8033/1: fix big endian __pv_phys_pfn_offset size related issue ARM: 8032/1: bL_switcher: fix validation check before its activation ARM: 8030/1: ARM : kdump : add arch_crash_save_vmcoreinfo ARM: 8027/1: fix do_div() bug in big-endian systems ARM: 8026/1: Fix emulation of multiply accumulate instructions ARM: 8024/1: Keep DEBUG_UART_{PHYS,VIRT} entries sorted
2014-04-23arm: dma-mapping: Fix mapping size valueRitesh Harjani1-1/+1
68efd7d2fb("arm: dma-mapping: remove order parameter from arm_iommu_create_mapping()") is causing kernel panic because it wrongly sets the value of mapping->size: Unable to handle kernel NULL pointer dereference at virtual address 000000a0 pgd = e7a84000 [000000a0] *pgd=00000000 ... PC is at bitmap_clear+0x48/0xd0 LR is at __iommu_remove_mapping+0x130/0x164 Fix it by correcting mapping->size value. Signed-off-by: Ritesh Harjani <ritesh.harjani@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2014-04-23Merge remote-tracking branches 'spi/fix/atmel', 'spi/fix/bfin5xx', ↵Mark Brown1-1/+1
'spi/fix/hspi' and 'spi/fix/sirf' into spi-linus
2014-04-23ARM: add renameat2 syscallMiklos Szeredi2-0/+2
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> [dropped arch/arm/include/asm/unistd.h changes --rmk] Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-23ARM: keep arch/arm/Kconfig and arch/arm/mm/Kconfig select entries sortedRussell King2-9/+9
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-22ARM: 8033/1: fix big endian __pv_phys_pfn_offset size related issueVictor Kamensky1-1/+1
Fix e26a9e00afc482b971afcaef1db8c9034d4d6d7c 'ARM: Better virt_to_page() handling' replaced __pv_phys_offset with __pv_phys_pfn_offset. Also note that size of __pv_phys_offset was quad but size of __pv_phys_pfn_offset is word. Instruction that used to update __pv_phys_offset which address is in r6 had to update low word of __pv_phys_offset so it used #LOW_OFFSET macro for store offset. Now when size of __pv_phys_pfn_offset is word, no difference between little endian and big endian should exist - i.e no offset should be used when __pv_phys_pfn_offset is stored. Note that for little endian image proposed change is noop, since in little endian case #LOW_OFFSET is defined 0 anyway. Reported-by: Taras Kondratiuk <taras.kondratiuk@linaro.org> Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-22ARM: 8032/1: bL_switcher: fix validation check before its activationNicolas Pitre3-4/+14
The switcher should not depend on MAX_CLUSTER to determine ifit should be activated or not. In a multiplatform kernel binary it is possible to have dual-cluster and quad-cluster platforms configured in. In that case MAX_CLUSTER which is a build time limit should be 4 and that shouldn't prevent the switcher from working if the kernel is booted on a b.L dual-cluster system. In bL_switcher_halve_cpus() we already have a runtime validation check to make sure we're dealing with only two clusters, so booting on a quad cluster system will be caught and switcher activation aborted. However, the b.L switcher must ensure the MCPM layer is initialized on the booted hardware before doing anything. The mcpm_is_available() function is added to that effect. Signed-off-by: Nicolas Pitre <nico@linaro.org> Tested-by: Abhilash Kesavan <kesavan.abhilash@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-22ARM: 8030/1: ARM : kdump : add arch_crash_save_vmcoreinfoLiu Hua1-0/+7
For vmcore generated by LPAE enabled kernel, user space utility such as crash needs additional infomation to parse. So this patch add arch_crash_save_vmcoreinfo as what PAE enabled i386 linux does. Cc: <stable@vger.kernel.org> Reviewed-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Liu Hua <sdu.liu@huawei.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-22ARM: 8027/1: fix do_div() bug in big-endian systemsXiangyu Lu1-1/+1
In big-endian systems, "%1" get the most significant part of the value, cause the instruction to get the wrong result. When viewing ftrace record in big-endian ARM systems, we found that the timestamp errors: swapper-0 [001] 1325.970000: 0:120:R ==> [001] 16:120:R events/1 events/1-16 [001] 1325.970000: 16:120:S ==> [001] 0:120:R swapper swapper-0 [000] 1325.1000000: 0:120:R + [000] 15:120:R events/0 swapper-0 [000] 1325.1000000: 0:120:R ==> [000] 15:120:R events/0 swapper-0 [000] 1326.030000: 0:120:R + [000] 1150:120:R sshd swapper-0 [000] 1326.030000: 0:120:R ==> [000] 1150:120:R sshd When viewed ftrace records, it will call the do_div(n, base) function, which achieved arch/arm/include/asm/div64.h in. When n = 10000000, base = 1000000, in do_div(n, base) will execute "umull %Q0, %R0, %1, %Q2". Reviewed-by: Dave Martin <Dave.Martin@arm.com> Reviewed-by: Nicolas Pitre <nico@linaro.org> Cc: <stable@vger.kernel.org> # 2.6.20+ Signed-off-by: Alex Wu <wuquanming@huawei.com> Signed-off-by: Xiangyu Lu <luxiangyu@huawei.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-22Merge branch 'x86-vdso-for-linus' of ↵Linus Torvalds1-11/+8
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 vdso fix from Peter Anvin: "This is a single build fix for building with gold as opposed to GNU ld. It got queued up separately and was expected to be pushed during the merge window, but it got left behind" * 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, vdso: Make the vdso linker script compatible with Gold
2014-04-22locks: rename file-private locks to "open file description locks"Jeff Layton1-3/+3
File-private locks have been merged into Linux for v3.15, and *now* people are commenting that the name and macro definitions for the new file-private locks suck. ...and I can't even disagree. The names and command macros do suck. We're going to have to live with these for a long time, so it's important that we be happy with the names before we're stuck with them. The consensus on the lists so far is that they should be rechristened as "open file description locks". The name isn't a big deal for the kernel, but the command macros are not visually distinct enough from the traditional POSIX lock macros. The glibc and documentation folks are recommending that we change them to look like F_OFD_{GETLK|SETLK|SETLKW}. That lessens the chance that a programmer will typo one of the commands wrong, and also makes it easier to spot this difference when reading code. This patch makes the following changes that I think are necessary before v3.15 ships: 1) rename the command macros to their new names. These end up in the uapi headers and so are part of the external-facing API. It turns out that glibc doesn't actually use the fcntl.h uapi header, but it's hard to be sure that something else won't. Changing it now is safest. 2) make the the /proc/locks output display these as type "OFDLCK" Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Carlos O'Donell <carlos@redhat.com> Cc: Stefan Metzmacher <metze@samba.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Frank Filz <ffilzlnx@mindspring.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-04-20um: Memory corruption on startupAnton Ivanov3-0/+8
The reverse case of this race (you must msync before read) is well known. This is the not so common one. It can be triggered only on systems which do a lot of task switching and only at UML startup. If you are starting 200+ UMLs ~ 0.5% will always die without this fix. Signed-off-by: Anton Ivanov <antivano@cisco.com> [rw: minor whitespace fixes] Signed-off-by: Richard Weinberger <richard@nod.at>
2014-04-20um: Missing pipe handlingAnton Ivanov1-0/+1
UML does not handle sigpipe. As a result when running it under expect or redirecting the IO from the console to an external program it will crash if the program stops or exits. Signed-off-by: Anton Ivanov <antivano@cisco.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2014-04-20uml: Simplify tempdir logic.Tristan Schmelcher1-297/+75
Inferring the mount hierarchy correctly from /proc/mounts is hard when MS_MOVE may have been used, and the previous code did it wrongly. This change simplifies the logic to only require that /dev/shm be _on_ tmpfs (which can be checked trivially with statfs) rather than that it be a _mountpoint_ of tmpfs, since there isn't a compelling reason to be that strict. We also now check for tmpfs on whatever directory we ultimately use so that the user is better informed. This change also moves the more standard TMPDIR environment variable check ahead of the others. Applies to 3.12. Signed-off-by: Tristan Schmelcher <tschmelcher@google.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2014-04-19Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds2-12/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Ingo Molnar: "This fixes the preemption-count imbalance crash reported by Owen Kibel" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Fix CMCI preemption bugs
2014-04-19Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds2-12/+16
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Two kernel side fixes: - an Intel uncore PMU driver potential crash fix - a kprobes/perf-call-graph interaction fix" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Use rdmsrl_safe() when initializing RAPL PMU kprobes/x86: Fix page-fault handling logic
2014-04-18Merge branch 'akpm' (incoming from Andrew)Linus Torvalds6-6/+7
Merge misc fixes from Andrew Morton: "13 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: thp: close race between split and zap huge pages mm: fix new kernel-doc warning in filemap.c mm: fix CONFIG_DEBUG_VM_RB description mm: use paravirt friendly ops for NUMA hinting ptes mips: export flush_icache_range mm/hugetlb.c: add cond_resched_lock() in return_unused_surplus_pages() wait: explain the shadowing and type inconsistencies Shiraz has moved Documentation/vm/numa_memory_policy.txt: fix wrong document in numa_memory_policy.txt powerpc/mm: fix ".__node_distance" undefined kernel/watchdog.c:touch_softlockup_watchdog(): use raw_cpu_write() init/Kconfig: move the trusted keyring config option to general setup vmscan: reclaim_clean_pages_from_list() must use mod_zone_page_state()
2014-04-18mips: export flush_icache_rangeKees Cook1-2/+2
The lkdtm module performs tests against executable memory ranges, so it needs to flush the icache for proper behaviors. Other architectures already export this, so do the same for MIPS. [akpm@linux-foundation.org: relocate export sites] Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Sanjay Lal <sanjayl@kymasys.com> Cc: John Crispin <blogic@openwrt.org> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-18Shiraz has movedViresh Kumar4-4/+4
shiraz.hashim@st.com email-id doesn't exist anymore as he has left the company. Replace ST's id with shiraz.linux.kernel@gmail.com. It also updates .mailmap file to fix address for 'git shortlog'. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Shiraz Hashim <shiraz.linux.kernel@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-18powerpc/mm: fix ".__node_distance" undefinedMike Qiu1-0/+1
CHK include/config/kernel.release CHK include/generated/uapi/linux/version.h CHK include/generated/utsrelease.h ... Building modules, stage 2. WARNING: 1 bad relocations c0000000013d6a30 R_PPC64_ADDR64 uprobes_fetch_type_table WRAP arch/powerpc/boot/zImage.pseries WRAP arch/powerpc/boot/zImage.epapr MODPOST 1849 modules ERROR: ".__node_distance" [drivers/block/nvme.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 make: *** Waiting for unfinished jobs.... The reason is symbol "__node_distance" not been exported in powerpc. Signed-off-by: Mike Qiu <qiudayu@linux.vnet.ibm.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Jesse Larrew <jlarrew@linux.vnet.ibm.com> Cc: Robert Jennings <rcj@linux.vnet.ibm.com> Cc: Alistair Popple <alistair@popple.id.au> Cc: Mike Qiu <qiudayu@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-18ARC: Delete stale barrier.hVineet Gupta1-37/+0
Commit 93ea02bb8435 ("arch: Clean up asm/barrier.h implementations") wired generic barrier.h for ARC, but failed to delete the existing file. In 3.15, due to rcupdate.h updates, this causes a build breakage on ARC: CC arch/arc/kernel/asm-offsets.s In file included from include/linux/sched.h:45:0, from arch/arc/kernel/asm-offsets.c:9: include/linux/rculist.h: In function __list_add_rcu: include/linux/rculist.h:54:2: error: implicit declaration of function smp_store_release [-Werror=implicit-function-declaration] rcu_assign_pointer(list_next_rcu(prev), new); ^ Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-18Merge tag 'pci-v3.15-fixes-1' of ↵Linus Torvalds1-4/+6
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "These are fixes for a powerpc NULL pointer dereference, an OF interrupt mapping issue on some of the new host bridges, and a DesignWare iATU issue. Host bridge drivers - Fix OF interrupt mapping for DesignWare, R-Car, Tegra (Lucas Stach) - Fix DesignWare iATU programming (Mohit Kumar) Miscellaneous - Fix powerpc NULL dereference from list_for_each_entry() update (Mike Qiu)" * tag 'pci-v3.15-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: PCI: tegra: Use new OF interrupt mapping when possible PCI: rcar: Use new OF interrupt mapping when possible PCI: designware: Use new OF interrupt mapping when possible PCI: designware: Fix iATU programming for cfg1, io and mem viewport PCI: designware: Fix comment for setting number of lanes powerpc/PCI: Fix NULL dereference in sys_pciconfig_iobase() list traversal
2014-04-18perf/x86/intel: Use rdmsrl_safe() when initializing RAPL PMUVenkatesh Srinivas1-3/+9
CPUs which should support the RAPL counters according to Family/Model/Stepping may still issue #GP when attempting to access the RAPL MSRs. This may happen when Linux is running under KVM and we are passing-through host F/M/S data, for example. Use rdmsrl_safe to first access the RAPL_POWER_UNIT MSR; if this fails, do not attempt to use this PMU. Signed-off-by: Venkatesh Srinivas <venkateshs@google.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1394739386-22260-1-git-send-email-venkateshs@google.com Cc: zheng.z.yan@intel.com Cc: eranian@google.com Cc: ak@linux.intel.com Cc: linux-kernel@vger.kernel.org [ The patch also silently fixes another bug: rapl_pmu_init() didn't handle the memory alloc failure case previously. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17Merge branch 'parisc-3.15' of ↵Linus Torvalds6-14/+14
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc updates from Helge Deller: "There are two major changes in this patchset: The major fix is that the epoll_pwait() syscall for 32bit userspace was not using the compat wrapper on a 64bit kernel. Secondly we changed the value of SHMLBA from 4MB to PAGE_SIZE to reflect that we can actually mmap to any multiple of PAGE_SIZE. The only thing which needs care is that shared mmaps need to be mapped at the same offset inside the 4MB cache window" * 'parisc-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: fix epoll_pwait syscall on compat kernel parisc: change value of SHMLBA from 0x00400000 to PAGE_SIZE parisc: Replace __get_cpu_var uses for address calculation
2014-04-17Merge tag 'stable/for-linus-3.15-rc1-tag' of ↵Linus Torvalds3-10/+23
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull Xen fixes from David Vrabel: "Xen regression and bug fixes for 3.15-rc1: - fix completely broken 32-bit PV guests caused by x86 refactoring 32-bit thread_info. - only enable ticketlock slow path on Xen (not bare metal) - fix two bugs with PV guests not shutting down when requested - fix a minor memory leak in xen-pciback error path" * tag 'stable/for-linus-3.15-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/manage: Poweroff forcefully if user-space is not yet up. xen/xenbus: Avoid synchronous wait on XenBus stalling shutdown/restart. xen/spinlock: Don't enable them unconditionally. xen-pciback: silence an unwanted debug printk xen: fix memory leak in __xen_pcibk_add_pci_dev() x86/xen: Fix 32-bit PV guests's usage of kernel_stack
2014-04-17kprobes/x86: Fix page-fault handling logicMasami Hiramatsu1-9/+7
Current kprobes in-kernel page fault handler doesn't expect that its single-stepping can be interrupted by an NMI handler which may cause a page fault(e.g. perf with callback tracing). In that case, the page-fault handled by kprobes and it misunderstands the page-fault has been caused by the single-stepping code and tries to recover IP address to probed address. But the truth is the page-fault has been caused by the NMI handler, and do_page_fault failes to handle real page fault because the IP address is modified and causes Kernel BUGs like below. ---- [ 2264.726905] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 [ 2264.727190] IP: [<ffffffff813c46e0>] copy_user_generic_string+0x0/0x40 To handle this correctly, I fixed the kprobes fault handler to ensure the faulted ip address is its own single-step buffer instead of checking current kprobe state. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Cc: Sandeepa Prabhu <sandeepa.prabhu@linaro.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: fche@redhat.com Cc: systemtap@sourceware.org Link: http://lkml.kernel.org/r/20140417081644.26341.52351.stgit@ltc230.yrl.intra.hitachi.co.jp Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17x86/mce: Fix CMCI preemption bugsIngo Molnar2-12/+10
The following commit: 27f6c573e0f7 ("x86, CMCI: Add proper detection of end of CMCI storms") Added two preemption bugs: - machine_check_poll() does a get_cpu_var() without a matching put_cpu_var(), which causes preemption imbalance and crashes upon bootup. - it does percpu ops without disabling preemption. Preemption is not disabled due to the mistaken use of a raw spinlock. To fix these bugs fix the imbalance and change cmci_discover_lock to a regular spinlock. Reported-by: Owen Kibel <qmewlo@gmail.com> Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Chen, Gong <gong.chen@linux.intel.com> Cc: Josh Boyer <jwboyer@fedoraproject.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Alexander Todorov <atodorov@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Link: http://lkml.kernel.org/n/tip-jtjptvgigpfkpvtQxpEk1at2@git.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> -- arch/x86/kernel/cpu/mcheck/mce.c | 4 +--- arch/x86/kernel/cpu/mcheck/mce_intel.c | 18 +++++++++--------- 2 files changed, 10 insertions(+), 12 deletions(-)
2014-04-16Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds6-38/+45
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Various fixes: - reboot regression fix - build message spam fix - GPU quirk fix - 'make kvmconfig' fix plus the wire-up of the renameat2() system call on i386" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Remove the PCI reboot method from the default chain x86/build: Supress "Nothing to be done for ..." messages x86/gpu: Fix sign extension issue in Intel graphics stolen memory quirks x86/platform: Fix "make O=dir kvmconfig" i386: Wire up the renameat2() syscall
2014-04-16Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds1-3/+30
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Tooling fixes, plus a simple hardware-enablement patch for the Intel RAPL PMU (energy use measurement) on Haswell CPUs, which I hope is still fine at this stage" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools: Instead of redirecting flex output, use -o perf tools: Fix double free in perf test 21 (code-reading.c) perf stat: Initialize statistics correctly perf bench: Set more defaults in the 'numa' suite perf bench: Fix segfault at the end of an 'all' execution perf bench: Update manpage to mention numa and futex perf probe: Use dwarf_getcfi_elf() instead of dwarf_getcfi() perf probe: Fix to handle errors in line_range searching perf probe: Fix --line option behavior perf tools: Pick up libdw without explicit LIBDW_DIR MAINTAINERS: Change e-mail to kernel.org one perf callchains: Disable unwind libraries when libelf isn't found tools lib traceevent: Do not call warning() directly tools lib traceevent: Print event name when show warning if possible perf top: Fix documentation of invalid -s option perf/x86: Enable DRAM RAPL support on Intel Haswell
2014-04-16Merge tag 'pinctrl-v3.15-2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pincontrol fixes from Linus Walleij: "A first set of pin control fixes for the v3.15 series: - Fix a couple of barnsjukdomar on the Rockchip driver. - Remove an idiotic debug print I happened to leave behind in the Nomadik driver. - Fixup the Qualcomm MSM interrupt handling code for the TLMM v2. - Three patches renaming the Broadcom Capri driver to BCM28155. This has been falling between the chairs for some time due to some cross-tree synchronization misunderstandings, now I'm fed up with this and just rename it in this -rc1 phase" * tag 'pinctrl-v3.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: fix typo in bindings documentation Update bcm_defconfig with new pinctrl CONFIG pinctrl: Rename Broadcom Capri pinctrl driver pinctrl: msm: Correct interrupt code for TLMM v2 pinctrl: nomadik: delete stray debug print pinctrl: rockchip: handle first half of rk3188-bank0 correctly pinctrl: rockchip: add return value to rockchip_set_mux pinctrl: rockchip: fix offset of mux registers for rk3188
2014-04-16Merge branch 'for-linus' of ↵Linus Torvalds11-31/+210
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 patches from Martin Schwidefsky: "An update to the oops output with additional information about the crash. The renameat2 system call is enabled. Two patches in regard to the PTR_ERR_OR_ZERO cleanup. And a bunch of bug fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/sclp_cmd: replace PTR_RET with PTR_ERR_OR_ZERO s390/sclp: replace PTR_RET with PTR_ERR_OR_ZERO s390/sclp_vt220: Fix kernel panic due to early terminal input s390/compat: fix typo s390/uaccess: fix possible register corruption in strnlen_user_srst() s390: add 31 bit warning message s390: wire up sys_renameat2 s390: show_registers() should not map user space addresses to kernel symbols s390/mm: print control registers and page table walk on crash s390/smp: fix smp_stop_cpu() for !CONFIG_SMP s390: fix control register update
2014-04-16Merge tag 'please-pull-ia64-erratum' of ↵Linus Torvalds3-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux Pull itanium erratum fix from Tony Luck: "Small workaround for a rare, but annoying, erratum #237" * tag 'please-pull-ia64-erratum' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux: [IA64] Change default PSR.ac from '1' to '0' (Fix erratum #237)
2014-04-16[IA64] Change default PSR.ac from '1' to '0' (Fix erratum #237)Tony Luck3-3/+3
April 2014 Itanium processor specification update: http://www.intel.com/content/www/us/en/processors/itanium/itanium-specification-update.html describes this erratum: ========================================================================= 237. Under a complex set of conditions, store to load forwarding for a sub 8-byte load may complete incorrectly Problem: A load instruction may complete incorrectly when a code sequence using 4-byte or smaller load and store operations to the same address is executed in combination with specific timing of all the following concurrent conditions: store to load forwarding, alignment checking enabled, a mis-predicted branch, and complex cache utilization activity. Implication: The affected sub 8-byte instruction may complete incorrectly resulting in unpredictable system behavior. There is an extremely low probability of exposure due to the significant number of complex microarchitectural concurrent conditions required to encounter the erratum. Workaround: Set PSR.ac = 0 to completely avoid the erratum. Disabling Hyper-Threading will significantly reduce exposure to the conditions that contribute to encountering the erratum. Status: See the Summary Table of Changes for the affected steppings. ========================================================================= [Table of changes essentially lists all models from McKinley to Tukwila] The PSR.ac bit controls whether the processor will always generate an unaligned reference trap (0x5a00) for a misaligned data access (when PSR.ac=1) or if it will let the access succeed when running on a cpu that implements logic to handle some unaligned accesses. Way back in 2008 in commit b704882e70d87d7f56db5ff17e2253f3fa90e4f3 [IA64] Rationalize kernel mode alignment checking we made the decision to always enable strict checking. We were already doing so in trap/interrupt context because the common preamble code set this bit - but the rest of supervisor code (and by inheritance user code) ran with PSR.ac=0. We now reverse that decision and set PSR.ac=0 everywhere in the kernel (also inherited by user processes). This will avoid the erratum using the method described in the Itanium specification update. Net effect for users is that the processor will handle unaligned access when it can (typically with a tiny performance bubble in the pipeline ... but much less invasive than taking a trap and having the OS perform the access). Signed-off-by: Tony Luck <tony.luck@intel.com>
2014-04-16x86: Remove the PCI reboot method from the default chainIngo Molnar1-35/+37
Steve reported a reboot hang and bisected it back to this commit: a4f1987e4c54 x86, reboot: Add EFI and CF9 reboot methods into the default list He heroically tested all reboot methods and found the following: reboot=t # triple fault ok reboot=k # keyboard ctrl FAIL reboot=b # BIOS ok reboot=a # ACPI FAIL reboot=e # EFI FAIL [system has no EFI] reboot=p # PCI 0xcf9 FAIL And I think it's pretty obvious that we should only try PCI 0xcf9 as a last resort - if at all. The other observation is that (on this box) we should never try the PCI reboot method, but close with either the 'triple fault' or the 'BIOS' (terminal!) reboot methods. Thirdly, CF9_COND is a total misnomer - it should be something like CF9_SAFE or CF9_CAREFUL, and 'CF9' should be 'CF9_FORCE' ... So this patch fixes the worst problems: - it orders the actual reboot logic to follow the reboot ordering pattern - it was in a pretty random order before for no good reason. - it fixes the CF9 misnomers and uses BOOT_CF9_FORCE and BOOT_CF9_SAFE flags to make the code more obvious. - it tries the BIOS reboot method before the PCI reboot method. (Since 'BIOS' is a terminal reboot method resulting in a hang if it does not work, this is essentially equivalent to removing the PCI reboot method from the default reboot chain.) - just for the miraculous possibility of terminal (resulting in hang) reboot methods of triple fault or BIOS returning without having done their job, there's an ordering between them as well. Reported-and-bisected-and-tested-by: Steven Rostedt <rostedt@goodmis.org> Cc: Li Aubrey <aubrey.li@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Link: http://lkml.kernel.org/r/20140404064120.GB11877@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-15xen/spinlock: Don't enable them unconditionally.Konrad Rzeszutek Wilk1-1/+4
The git commit a945928ea2709bc0e8e8165d33aed855a0110279 ('xen: Do not enable spinlocks before jump_label_init() has executed') was added to deal with the jump machinery. Earlier the code that turned on the jump label was only called by Xen specific functions. But now that it had been moved to the initcall machinery it gets called on Xen, KVM, and baremetal - ouch!. And the detection machinery to only call it on Xen wasn't remembered in the heat of merge window excitement. This means that the slowpath is enabled on baremetal while it should not be. Reported-by: Waiman Long <waiman.long@hp.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> CC: stable@vger.kernel.org CC: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-04-15x86/xen: Fix 32-bit PV guests's usage of kernel_stackBoris Ostrovsky2-9/+19
Commit 198d208df4371734ac4728f69cb585c284d20a15 ("x86: Keep thread_info on thread stack in x86_32") made 32-bit kernels use kernel_stack to point to thread_info. That change missed a couple of updates needed by Xen's 32-bit PV guests: 1. kernel_stack needs to be initialized for secondary CPUs 2. GET_THREAD_INFO() now uses %fs register which may not be the kernel's version when executing xen_iret(). With respect to the second issue, we don't need GET_THREAD_INFO() anymore: we used it as an intermediate step to get to per_cpu xen_vcpu and avoid referencing %fs. Now that we are going to use %fs anyway we may as well go directly to xen_vcpu. Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-04-14Merge git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds8-23/+94
Pull KVM fixes from Marcelo Tosatti: - Fix for guest triggerable BUG_ON (CVE-2014-0155) - CR4.SMAP support - Spurious WARN_ON() fix * git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: remove WARN_ON from get_kernel_ns() KVM: Rename variable smep to cr4_smep KVM: expose SMAP feature to guest KVM: Disable SMAP for guests in EPT realmode and EPT unpaging mode KVM: Add SMAP support when setting CR4 KVM: Remove SMAP bit from CR4_RESERVED_BITS KVM: ioapic: try to recover if pending_eoi goes out of range KVM: ioapic: fix assignment of ioapic->rtc_status.pending_eoi (CVE-2014-0155)
2014-04-14powerpc/PCI: Fix NULL dereference in sys_pciconfig_iobase() list traversalMike Qiu1-4/+6
3bc955987fb3 ("powerpc/PCI: Use list_for_each_entry() for bus traversal") caused a NULL pointer dereference because the loop body set the iterator to NULL: Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc000000000041d78 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c000000000041d78] .sys_pciconfig_iobase+0x68/0x1f0 LR [c000000000041e0c] .sys_pciconfig_iobase+0xfc/0x1f0 Call Trace: [c0000003b4787db0] [c000000000041e0c] .sys_pciconfig_iobase+0xfc/0x1f0 (unreliable) [c0000003b4787e30] [c000000000009ed8] syscall_exit+0x0/0x98 Fix it by using a temporary variable for the iterator. [bhelgaas: changelog, drop tmp_bus initialization] Fixes: 3bc955987fb3 powerpc/PCI: Use list_for_each_entry() for bus traversal Signed-off-by: Mike Qiu <qiudayu@linux.vnet.ibm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-04-14ARM: 8026/1: Fix emulation of multiply accumulate instructionsJay Foad2-0/+4
The emulation for single and double precision multiply accumulate instructions correctly normalised any denormal values in the operand registers, but failed to normalise the destination (accumulator) register. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=70501 Signed-off-by: Jay Foad <jay.foad@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-14ARM: 8024/1: Keep DEBUG_UART_{PHYS,VIRT} entries sortedAlexander Shiyan1-6/+6
This patch sorts the entries for DEBUG_UART_{PHYS,VIRT}. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-04-14KVM: x86: remove WARN_ON from get_kernel_ns()Marcelo Tosatti1-1/+0
Function and callers can be preempted. https://bugzilla.kernel.org/show_bug.cgi?id=73721 Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2014-04-14KVM: Rename variable smep to cr4_smepFeng Wu1-3/+3
Rename variable smep to cr4_smep, which can better reflect the meaning of the variable. Signed-off-by: Feng Wu <feng.wu@intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2014-04-14KVM: expose SMAP feature to guestFeng Wu1-1/+1
This patch exposes SMAP feature to guest Signed-off-by: Feng Wu <feng.wu@intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2014-04-14KVM: Disable SMAP for guests in EPT realmode and EPT unpaging modeFeng Wu1-5/+6
SMAP is disabled if CPU is in non-paging mode in hardware. However KVM always uses paging mode to emulate guest non-paging mode with TDP. To emulate this behavior, SMAP needs to be manually disabled when guest switches to non-paging mode. Signed-off-by: Feng Wu <feng.wu@intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2014-04-14KVM: Add SMAP support when setting CR4Feng Wu5-13/+84
This patch adds SMAP handling logic when setting CR4 for guests Thanks a lot to Paolo Bonzini for his suggestion to use the branchless way to detect SMAP violation. Signed-off-by: Feng Wu <feng.wu@intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2014-04-14KVM: Remove SMAP bit from CR4_RESERVED_BITSFeng Wu1-1/+1
This patch removes SMAP bit from CR4_RESERVED_BITS. Signed-off-by: Feng Wu <feng.wu@intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2014-04-14ARM: shmobile: r8a7778: Use clks as MSTP007 parentSimon Horman1-1/+1
According to the documentation the parent clock of MSTP007 should be clks not clkp. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mark Brown <broonie@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-12 18:40:27 +0000