Merge tag 'staging-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging/IIO driver fixes from Greg KH:
 "Here are a few small staging and iio driver fixes for -rc4.

  Nothing major, just a few small bugfixes for some reported issues, and
  a MAINTAINERS file update for the fbtft drivers.

  We also re-enable the building of the erofs filesystem as the XArray
  patches that were causing it to break never got merged in the -rc1
  cycle, so there's no reason it can't be turned back on for now. The
  problem that was previously there is now being handled in the Xarray
  tree at the moment, so it will not hit us again in the future.

  All of these patches have been in linux-next with no reported issues"

* tag 'staging-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: vboxvideo: Change address of scanout buffer on page-flip
  staging: vboxvideo: Fix IRQs no longer working
  staging: gasket: TODO: re-implement using UIO
  staging/fbtft: Update TODO and mailing lists
  staging: erofs: rename superblock flags (MS_xyz -> SB_xyz)
  iio: imu: st_lsm6dsx: take into account ts samples in wm configuration
  Revert "iio: temperature: maxim_thermocouple: add MAX31856 part"
  Revert "staging: erofs: disable compiling temporarile"
  MAINTAINERS: Switch a maintainer for drivers/staging/gasket
  staging: wilc1000: revert "fix TODO to compile spi and sdio components in single module"

13 files changed, 54 insertions, 19 deletions

diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
index 7589f2ad1dae..631360b14ca7 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
@@ -187,12 +187,15 @@ static int st_lsm6dsx_set_fifo_odr(struct st_lsm6dsx_sensor *sensor,
 
 int st_lsm6dsx_update_watermark(struct st_lsm6dsx_sensor *sensor, u16 watermark)
 {
-	u16 fifo_watermark = ~0, cur_watermark, sip = 0, fifo_th_mask;
+	u16 fifo_watermark = ~0, cur_watermark, fifo_th_mask;
 	struct st_lsm6dsx_hw *hw = sensor->hw;
 	struct st_lsm6dsx_sensor *cur_sensor;
 	int i, err, data;
 	__le16 wdata;
 
+	if (!hw->sip)
+		return 0;
+
 	for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
 		cur_sensor = iio_priv(hw->iio_devs[i]);
 
@@ -203,14 +206,10 @@ int st_lsm6dsx_update_watermark(struct st_lsm6dsx_sensor *sensor, u16 watermark)
 						       : cur_sensor->watermark;
 
 		fifo_watermark = min_t(u16, fifo_watermark, cur_watermark);
-		sip += cur_sensor->sip;
 	}
 
-	if (!sip)
-		return 0;
-
-	fifo_watermark = max_t(u16, fifo_watermark, sip);
-	fifo_watermark = (fifo_watermark / sip) * sip;
+	fifo_watermark = max_t(u16, fifo_watermark, hw->sip);
+	fifo_watermark = (fifo_watermark / hw->sip) * hw->sip;
 	fifo_watermark = fifo_watermark * hw->settings->fifo_ops.th_wl;
 
 	err = regmap_read(hw->regmap, hw->settings->fifo_ops.fifo_th.addr + 1,
diff --git a/drivers/iio/temperature/maxim_thermocouple.c b/drivers/iio/temperature/maxim_thermocouple.c
index 54e383231d1e..c31b9633f32d 100644
--- a/drivers/iio/temperature/maxim_thermocouple.c
+++ b/drivers/iio/temperature/maxim_thermocouple.c
@@ -258,7 +258,6 @@ static int maxim_thermocouple_remove(struct spi_device *spi)
 static const struct spi_device_id maxim_thermocouple_id[] = {
 	{"max6675", MAX6675},
 	{"max31855", MAX31855},
-	{"max31856", MAX31855},
 	{},
 };
 MODULE_DEVICE_TABLE(spi, maxim_thermocouple_id);
diff --git a/drivers/staging/erofs/Kconfig b/drivers/staging/erofs/Kconfig
index 96f614934df1..663b755bf2fb 100644
--- a/drivers/staging/erofs/Kconfig
+++ b/drivers/staging/erofs/Kconfig
@@ -2,7 +2,7 @@
 
 config EROFS_FS
 	tristate "EROFS filesystem support"
-	depends on BROKEN
+	depends on BLOCK
 	help
 	  EROFS(Enhanced Read-Only File System) is a lightweight
 	  read-only file system with modern designs (eg. page-sized
diff --git a/drivers/staging/erofs/super.c b/drivers/staging/erofs/super.c
index 1aec509c805f..2df9768edac9 100644
--- a/drivers/staging/erofs/super.c
+++ b/drivers/staging/erofs/super.c
@@ -340,7 +340,7 @@ static int erofs_read_super(struct super_block *sb,
 		goto err_sbread;
 
 	sb->s_magic = EROFS_SUPER_MAGIC;
-	sb->s_flags |= MS_RDONLY | MS_NOATIME;
+	sb->s_flags |= SB_RDONLY | SB_NOATIME;
 	sb->s_maxbytes = MAX_LFS_FILESIZE;
 	sb->s_time_gran = 1;
 
@@ -627,7 +627,7 @@ static int erofs_remount(struct super_block *sb, int *flags, char *data)
 {
 	BUG_ON(!sb_rdonly(sb));
 
-	*flags |= MS_RDONLY;
+	*flags |= SB_RDONLY;
 	return 0;
 }
 
diff --git a/drivers/staging/fbtft/TODO b/drivers/staging/fbtft/TODO
index 7e64c7e438f0..a9f4802bb6be 100644
--- a/drivers/staging/fbtft/TODO
+++ b/drivers/staging/fbtft/TODO
@@ -2,3 +2,7 @@
   GPIO descriptor API in <linux/gpio/consumer.h> and look up GPIO
   lines from device tree, ACPI or board files, board files should
   use <linux/gpio/machine.h>
+
+* convert all these over to drm_simple_display_pipe and submit for inclusion
+  into the DRM subsystem under drivers/gpu/drm - fbdev doesn't take any new
+  drivers anymore.
diff --git a/drivers/staging/gasket/TODO b/drivers/staging/gasket/TODO
index 6ff8e01b04cc..5b1865f8af2d 100644
--- a/drivers/staging/gasket/TODO
+++ b/drivers/staging/gasket/TODO
@@ -1,9 +1,22 @@
 This is a list of things that need to be done to get this driver out of the
 staging directory.
+
+- Implement the gasket framework's functionality through UIO instead of
+  introducing a new user-space drivers framework that is quite similar.
+
+  UIO provides the necessary bits to implement user-space drivers. Meanwhile
+  the gasket APIs adds some extra conveniences like PCI BAR mapping, and
+  MSI interrupts. Add these features to the UIO subsystem, then re-implement
+  the Apex driver as a basic UIO driver instead (include/linux/uio_driver.h)
+
 - Document sysfs files with Documentation/ABI/ entries.
+
 - Use misc interface instead of major number for driver version description.
+
 - Add descriptions of module_param's
+
 - apex_get_status() should actually check status.
+
 - "drivers" should never be dealing with "raw" sysfs calls or mess around with
   kobjects at all. The driver core should handle all of this for you
   automaically. There should not be a need for raw attribute macros.
diff --git a/drivers/staging/vboxvideo/vbox_drv.c b/drivers/staging/vboxvideo/vbox_drv.c
index da92c493f157..69cc508af1bc 100644
--- a/drivers/staging/vboxvideo/vbox_drv.c
+++ b/drivers/staging/vboxvideo/vbox_drv.c
@@ -59,6 +59,11 @@ static int vbox_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		ret = PTR_ERR(dev);
 		goto err_drv_alloc;
 	}
+
+	ret = pci_enable_device(pdev);
+	if (ret)
+		goto err_pci_enable;
+
 	dev->pdev = pdev;
 	pci_set_drvdata(pdev, dev);
 
@@ -75,6 +80,8 @@ static int vbox_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
  err_drv_dev_register:
 	vbox_driver_unload(dev);
  err_vbox_driver_load:
+	pci_disable_device(pdev);
+ err_pci_enable:
 	drm_dev_put(dev);
  err_drv_alloc:
 	return ret;
diff --git a/drivers/staging/vboxvideo/vbox_mode.c b/drivers/staging/vboxvideo/vbox_mode.c
index a83eac8668d0..79836c8fb909 100644
--- a/drivers/staging/vboxvideo/vbox_mode.c
+++ b/drivers/staging/vboxvideo/vbox_mode.c
@@ -323,6 +323,11 @@ static int vbox_crtc_page_flip(struct drm_crtc *crtc,
 	if (rc)
 		return rc;
 
+	mutex_lock(&vbox->hw_mutex);
+	vbox_set_view(crtc);
+	vbox_do_modeset(crtc, &crtc->mode);
+	mutex_unlock(&vbox->hw_mutex);
+
 	spin_lock_irqsave(&drm->event_lock, flags);
 
 	if (event)
diff --git a/drivers/staging/wilc1000/Makefile b/drivers/staging/wilc1000/Makefile
index f7b07c0b5ce2..ee7e26b886a5 100644
--- a/drivers/staging/wilc1000/Makefile
+++ b/drivers/staging/wilc1000/Makefile
@@ -1,4 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_WILC1000) += wilc1000.o
 
 ccflags-y += -DFIRMWARE_1002=\"atmel/wilc1002_firmware.bin\" \
 		-DFIRMWARE_1003=\"atmel/wilc1003_firmware.bin\"
@@ -11,9 +12,7 @@ wilc1000-objs := wilc_wfi_cfgoperations.o linux_wlan.o linux_mon.o \
 			wilc_wlan.o
 
 obj-$(CONFIG_WILC1000_SDIO) += wilc1000-sdio.o
-wilc1000-sdio-objs += $(wilc1000-objs)
 wilc1000-sdio-objs += wilc_sdio.o
 
 obj-$(CONFIG_WILC1000_SPI) += wilc1000-spi.o
-wilc1000-spi-objs += $(wilc1000-objs)
 wilc1000-spi-objs += wilc_spi.o
diff --git a/drivers/staging/wilc1000/linux_wlan.c b/drivers/staging/wilc1000/linux_wlan.c
index 01cf4bd2e192..3b8d237decbf 100644
--- a/drivers/staging/wilc1000/linux_wlan.c
+++ b/drivers/staging/wilc1000/linux_wlan.c
@@ -1038,8 +1038,8 @@ void wilc_netdev_cleanup(struct wilc *wilc)
 	}
 
 	kfree(wilc);
-	wilc_debugfs_remove();
 }
+EXPORT_SYMBOL_GPL(wilc_netdev_cleanup);
 
 static const struct net_device_ops wilc_netdev_ops = {
 	.ndo_init = mac_init_fn,
@@ -1062,7 +1062,6 @@ int wilc_netdev_init(struct wilc **wilc, struct device *dev, int io_type,
 	if (!wl)
 		return -ENOMEM;
 
-	wilc_debugfs_init();
 	*wilc = wl;
 	wl->io_type = io_type;
 	wl->hif_func = ops;
@@ -1124,3 +1123,6 @@ int wilc_netdev_init(struct wilc **wilc, struct device *dev, int io_type,
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(wilc_netdev_init);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/wilc1000/wilc_debugfs.c b/drivers/staging/wilc1000/wilc_debugfs.c
index edc72876458d..8001df66b8c2 100644
--- a/drivers/staging/wilc1000/wilc_debugfs.c
+++ b/drivers/staging/wilc1000/wilc_debugfs.c
@@ -19,6 +19,7 @@ static struct dentry *wilc_dir;
 
 #define DBG_LEVEL_ALL	(DEBUG | INFO | WRN | ERR)
 static atomic_t WILC_DEBUG_LEVEL = ATOMIC_INIT(ERR);
+EXPORT_SYMBOL_GPL(WILC_DEBUG_LEVEL);
 
 static ssize_t wilc_debug_level_read(struct file *file, char __user *userbuf,
 				     size_t count, loff_t *ppos)
@@ -87,7 +88,7 @@ static struct wilc_debugfs_info_t debugfs_info[] = {
 	},
 };
 
-int wilc_debugfs_init(void)
+static int __init wilc_debugfs_init(void)
 {
 	int i;
 	struct wilc_debugfs_info_t *info;
@@ -103,10 +104,12 @@ int wilc_debugfs_init(void)
 	}
 	return 0;
 }
+module_init(wilc_debugfs_init);
 
-void wilc_debugfs_remove(void)
+static void __exit wilc_debugfs_remove(void)
 {
 	debugfs_remove_recursive(wilc_dir);
 }
+module_exit(wilc_debugfs_remove);
 
 #endif
diff --git a/drivers/staging/wilc1000/wilc_wlan.c b/drivers/staging/wilc1000/wilc_wlan.c
index 6787b6e9f124..8b184aa30d25 100644
--- a/drivers/staging/wilc1000/wilc_wlan.c
+++ b/drivers/staging/wilc1000/wilc_wlan.c
@@ -417,6 +417,7 @@ void chip_allow_sleep(struct wilc *wilc)
 	wilc->hif_func->hif_write_reg(wilc, 0xf0, reg & ~BIT(0));
 	wilc->hif_func->hif_write_reg(wilc, 0xfa, 0);
 }
+EXPORT_SYMBOL_GPL(chip_allow_sleep);
 
 void chip_wakeup(struct wilc *wilc)
 {
@@ -471,6 +472,7 @@ void chip_wakeup(struct wilc *wilc)
 	}
 	chip_ps_state = CHIP_WAKEDUP;
 }
+EXPORT_SYMBOL_GPL(chip_wakeup);
 
 void wilc_chip_sleep_manually(struct wilc *wilc)
 {
@@ -484,6 +486,7 @@ void wilc_chip_sleep_manually(struct wilc *wilc)
 	chip_ps_state = CHIP_SLEEPING_MANUAL;
 	release_bus(wilc, RELEASE_ONLY);
 }
+EXPORT_SYMBOL_GPL(wilc_chip_sleep_manually);
 
 void host_wakeup_notify(struct wilc *wilc)
 {
@@ -491,6 +494,7 @@ void host_wakeup_notify(struct wilc *wilc)
 	wilc->hif_func->hif_write_reg(wilc, 0x10b0, 1);
 	release_bus(wilc, RELEASE_ONLY);
 }
+EXPORT_SYMBOL_GPL(host_wakeup_notify);
 
 void host_sleep_notify(struct wilc *wilc)
 {
@@ -498,6 +502,7 @@ void host_sleep_notify(struct wilc *wilc)
 	wilc->hif_func->hif_write_reg(wilc, 0x10ac, 1);
 	release_bus(wilc, RELEASE_ONLY);
 }
+EXPORT_SYMBOL_GPL(host_sleep_notify);
 
 int wilc_wlan_handle_txq(struct net_device *dev, u32 *txq_count)
 {
@@ -871,6 +876,7 @@ void wilc_handle_isr(struct wilc *wilc)
 
 	release_bus(wilc, RELEASE_ALLOW_SLEEP);
 }
+EXPORT_SYMBOL_GPL(wilc_handle_isr);
 
 int wilc_wlan_firmware_download(struct wilc *wilc, const u8 *buffer,
 				u32 buffer_size)
diff --git a/drivers/staging/wilc1000/wilc_wlan_if.h b/drivers/staging/wilc1000/wilc_wlan_if.h
index 00d13b153f80..b81a73b9bd67 100644
--- a/drivers/staging/wilc1000/wilc_wlan_if.h
+++ b/drivers/staging/wilc1000/wilc_wlan_if.h
@@ -831,6 +831,4 @@ struct wilc;
 int wilc_wlan_init(struct net_device *dev);
 u32 wilc_get_chipid(struct wilc *wilc, bool update);
 
-int wilc_debugfs_init(void);
-void wilc_debugfs_remove(void);
 #endif