diff options
author | Mark Haverkamp <markh@osdl.org> | 2005-05-16 18:28:42 -0700 |
---|---|---|
committer | James Bottomley <jejb@mulgrave.(none)> | 2005-05-20 15:48:00 -0500 |
commit | 7c00ffa314bf0fb0e23858bbebad33b48b6abbb9 (patch) | |
tree | 4d6b65bb5a2c8fecf48a8c6402c2cc867aa2fe6c /drivers/scsi/aacraid/rkt.c | |
parent | 672b2d38da4fff4c4452685a25fb88b65243d1a6 (diff) |
[SCSI] 2.6 aacraid: Variable FIB size (updated patch)
New code from the Adaptec driver. Performance enhancement for newer
adapters. I hope that this isn't too big for a single patch. I believe
that other than the few small cleanups mentioned, that the changes are
all related.
- Added Variable FIB size negotiation for new adapters.
- Added support to maximize scatter gather tables and thus permit
requests larger than 64KB/each.
- Limit Scatter Gather to 34 elements for ROMB platforms.
- aac_printf is only enabled with AAC_QUIRK_34SG
- Large FIB ioctl support
- some minor cleanup
Passes sparse check.
I have tested it on x86 and ppc64 machines.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Diffstat (limited to 'drivers/scsi/aacraid/rkt.c')
-rw-r--r-- | drivers/scsi/aacraid/rkt.c | 39 |
1 files changed, 23 insertions, 16 deletions
diff --git a/drivers/scsi/aacraid/rkt.c b/drivers/scsi/aacraid/rkt.c index 2d8ecd7f1479..7d68b7825137 100644 --- a/drivers/scsi/aacraid/rkt.c +++ b/drivers/scsi/aacraid/rkt.c @@ -98,7 +98,9 @@ static irqreturn_t aac_rkt_intr(int irq, void *dev_id, struct pt_regs *regs) * for its completion. */ -static int rkt_sync_cmd(struct aac_dev *dev, u32 command, u32 p1, u32 *status) +static int rkt_sync_cmd(struct aac_dev *dev, u32 command, + u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6, + u32 *status, u32 *r1, u32 *r2, u32 *r3, u32 *r4) { unsigned long start; int ok; @@ -107,12 +109,12 @@ static int rkt_sync_cmd(struct aac_dev *dev, u32 command, u32 p1, u32 *status) */ rkt_writel(dev, InboundMailbox0, command); /* - * Write the parameters into Mailboxes 1 - 4 + * Write the parameters into Mailboxes 1 - 6 */ rkt_writel(dev, InboundMailbox1, p1); - rkt_writel(dev, InboundMailbox2, 0); - rkt_writel(dev, InboundMailbox3, 0); - rkt_writel(dev, InboundMailbox4, 0); + rkt_writel(dev, InboundMailbox2, p2); + rkt_writel(dev, InboundMailbox3, p3); + rkt_writel(dev, InboundMailbox4, p4); /* * Clear the synch command doorbell to start on a clean slate. */ @@ -169,6 +171,14 @@ static int rkt_sync_cmd(struct aac_dev *dev, u32 command, u32 p1, u32 *status) */ if (status) *status = rkt_readl(dev, IndexRegs.Mailbox[0]); + if (r1) + *r1 = rkt_readl(dev, IndexRegs.Mailbox[1]); + if (r2) + *r2 = rkt_readl(dev, IndexRegs.Mailbox[2]); + if (r3) + *r3 = rkt_readl(dev, IndexRegs.Mailbox[3]); + if (r4) + *r4 = rkt_readl(dev, IndexRegs.Mailbox[4]); /* * Clear the synch command doorbell. */ @@ -190,8 +200,8 @@ static int rkt_sync_cmd(struct aac_dev *dev, u32 command, u32 p1, u32 *status) static void aac_rkt_interrupt_adapter(struct aac_dev *dev) { - u32 ret; - rkt_sync_cmd(dev, BREAKPOINT_REQUEST, 0, &ret); + rkt_sync_cmd(dev, BREAKPOINT_REQUEST, 0, 0, 0, 0, 0, 0, + NULL, NULL, NULL, NULL, NULL); } /** @@ -220,7 +230,8 @@ static void aac_rkt_notify_adapter(struct aac_dev *dev, u32 event) rkt_writel(dev, MUnit.IDR,INBOUNDDOORBELL_3); break; case HostShutdown: -// rkt_sync_cmd(dev, HOST_CRASHING, 0, 0, 0, 0, &ret); +// rkt_sync_cmd(dev, HOST_CRASHING, 0, 0, 0, 0, 0, 0, +// NULL, NULL, NULL, NULL, NULL); break; case FastIo: rkt_writel(dev, MUnit.IDR,INBOUNDDOORBELL_6); @@ -243,17 +254,11 @@ static void aac_rkt_notify_adapter(struct aac_dev *dev, u32 event) static void aac_rkt_start_adapter(struct aac_dev *dev) { - u32 status; struct aac_init *init; init = dev->init; init->HostElapsedSeconds = cpu_to_le32(get_seconds()); /* - * Tell the adapter we are back and up and running so it will scan - * its command queues and enable our interrupts - */ - dev->irq_mask = (DoorBellPrintfReady | OUTBOUNDDOORBELL_1 | OUTBOUNDDOORBELL_2 | OUTBOUNDDOORBELL_3 | OUTBOUNDDOORBELL_4); - /* * First clear out all interrupts. Then enable the one's that we * can handle. */ @@ -263,7 +268,8 @@ static void aac_rkt_start_adapter(struct aac_dev *dev) rkt_writeb(dev, MUnit.OIMR, dev->OIMR = 0xfb); // We can only use a 32 bit address here - rkt_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa, &status); + rkt_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa, + 0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL); } /** @@ -310,7 +316,8 @@ static int aac_rkt_check_health(struct aac_dev *dev) post->Post_Command = cpu_to_le32(COMMAND_POST_RESULTS); post->Post_Address = cpu_to_le32(baddr); rkt_writel(dev, MUnit.IMRx[0], paddr); - rkt_sync_cmd(dev, COMMAND_POST_RESULTS, baddr, &status); + rkt_sync_cmd(dev, COMMAND_POST_RESULTS, baddr, 0, 0, 0, 0, 0, + NULL, NULL, NULL, NULL, NULL); pci_free_consistent(dev->pdev, sizeof(struct POSTSTATUS), post, paddr); if ((buffer[0] == '0') && (buffer[1] == 'x')) { |