diff options
| author | Mark M. Hoffman <mhoffman@lightlink.com> | 2005-11-26 20:10:56 +0100 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@suse.de> | 2006-01-05 22:16:20 -0800 |
| commit | 5b319400f5e2cd31a82b38405856ff2b46a9bb83 (patch) | |
| tree | ab22b0738f072128dc428f16aa37b0aa89934cc4 /Documentation | |
| parent | dd149c52223cfb05cdefb0755d3c2793e8d33ede (diff) | |
[PATCH] hwmon: Clarify the W83627THF VID documentation
This patch clarifies the W83627THF VID documentation.
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'Documentation')
| -rw-r--r-- | Documentation/hwmon/w83627hf | 19 |
1 files changed, 11 insertions, 8 deletions
diff --git a/Documentation/hwmon/w83627hf b/Documentation/hwmon/w83627hf index 78f37c2d602e..5d23776e9907 100644 --- a/Documentation/hwmon/w83627hf +++ b/Documentation/hwmon/w83627hf @@ -54,13 +54,16 @@ If you really want i2c accesses for these Super I/O chips, use the w83781d driver. However this is not the preferred method now that this ISA driver has been developed. -Technically, the w83627thf does not support a VID reading. However, it's -possible or even likely that your mainboard maker has routed these signals -to a specific set of general purpose IO pins (the Asus P4C800-E is one such -board). The w83627thf driver now interprets these as VID. If the VID on -your board doesn't work, first see doc/vid in the lm_sensors package. If -that still doesn't help, email us at lm-sensors@lm-sensors.org. +The w83627_HF_ uses pins 110-106 as VID0-VID4. The w83627_THF_ uses the +same pins as GPIO[0:4]. Technically, the w83627_THF_ does not support a +VID reading. However the two chips have the identical 128 pin package. So, +it is possible or even likely for a w83627thf to have the VID signals routed +to these pins despite their not being labeled for that purpose. Therefore, +the w83627thf driver interprets these as VID. If the VID on your board +doesn't work, first see doc/vid in the lm_sensors package[1]. If that still +doesn't help, you may just ignore the bogus VID reading with no harm done. -For further information on this driver see the w83781d driver -documentation. +For further information on this driver see the w83781d driver documentation. + +[1] http://www2.lm-sensors.nu/~lm78/cvs/browse.cgi/lm_sensors2/doc/vid |