From ea077c1cea36a6b5ded1256dcd56c72ff2a22c62 Mon Sep 17 00:00:00 2001 From: Rostislav Lisovy Date: Tue, 15 Apr 2014 14:37:55 +0200 Subject: cfg80211: Add attributes describing prohibited channel bandwidth Since there are frequency bands (e.g. 5.9GHz) allowing channels with only 10 or 5 MHz bandwidth, this patch adds attributes that allow keeping track about this information. When channel attributes are reported to user-space, make sure to not break old tools, i.e. if the 'split wiphy dump' is enabled, report the extra attributes (if present) describing the bandwidth restrictions. If the 'split wiphy dump' is not enabled, completely omit those channels that have flags set to either IEEE80211_CHAN_NO_10MHZ or IEEE80211_CHAN_NO_20MHZ. Add the check for new bandwidth restriction flags in cfg80211_chandef_usable() to comply with the restrictions. Signed-off-by: Rostislav Lisovy Signed-off-by: Johannes Berg --- include/net/cfg80211.h | 6 ++++++ include/uapi/linux/nl80211.h | 6 ++++++ net/wireless/chan.c | 2 ++ net/wireless/nl80211.c | 13 +++++++++++++ 4 files changed, 27 insertions(+) diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 3dd2cb46554..c98cf08538b 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -111,6 +111,10 @@ enum ieee80211_band { * restrictions. * @IEEE80211_CHAN_INDOOR_ONLY: see %NL80211_FREQUENCY_ATTR_INDOOR_ONLY * @IEEE80211_CHAN_GO_CONCURRENT: see %NL80211_FREQUENCY_ATTR_GO_CONCURRENT + * @IEEE80211_CHAN_NO_20MHZ: 20 MHz bandwidth is not permitted + * on this channel. + * @IEEE80211_CHAN_NO_10MHZ: 10 MHz bandwidth is not permitted + * on this channel. * */ enum ieee80211_channel_flags { @@ -125,6 +129,8 @@ enum ieee80211_channel_flags { IEEE80211_CHAN_NO_160MHZ = 1<<8, IEEE80211_CHAN_INDOOR_ONLY = 1<<9, IEEE80211_CHAN_GO_CONCURRENT = 1<<10, + IEEE80211_CHAN_NO_20MHZ = 1<<11, + IEEE80211_CHAN_NO_10MHZ = 1<<12, }; #define IEEE80211_CHAN_NO_HT40 \ diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 513bfd7b2e5..0592032ff16 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -2358,6 +2358,10 @@ enum nl80211_band_attr { * connected to an AP with DFS and radar detection on the UNII band (it is * up to user-space, i.e., wpa_supplicant to perform the required * verifications) + * @NL80211_FREQUENCY_ATTR_NO_20MHZ: 20 MHz operation is not allowed + * on this channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_NO_10MHZ: 10 MHz operation is not allowed + * on this channel in current regulatory domain. * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number * currently defined * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use @@ -2384,6 +2388,8 @@ enum nl80211_frequency_attr { NL80211_FREQUENCY_ATTR_DFS_CAC_TIME, NL80211_FREQUENCY_ATTR_INDOOR_ONLY, NL80211_FREQUENCY_ATTR_GO_CONCURRENT, + NL80211_FREQUENCY_ATTR_NO_20MHZ, + NL80211_FREQUENCY_ATTR_NO_10MHZ, /* keep last */ __NL80211_FREQUENCY_ATTR_AFTER_LAST, diff --git a/net/wireless/chan.c b/net/wireless/chan.c index 2adf7b2eccb..84d686e2dbd 100644 --- a/net/wireless/chan.c +++ b/net/wireless/chan.c @@ -616,12 +616,14 @@ bool cfg80211_chandef_usable(struct wiphy *wiphy, width = 5; break; case NL80211_CHAN_WIDTH_10: + prohibited_flags |= IEEE80211_CHAN_NO_10MHZ; width = 10; break; case NL80211_CHAN_WIDTH_20: if (!ht_cap->ht_supported) return false; case NL80211_CHAN_WIDTH_20_NOHT: + prohibited_flags |= IEEE80211_CHAN_NO_20MHZ; width = 20; break; case NL80211_CHAN_WIDTH_40: diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index fce423a4e96..ca75f60041d 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -567,6 +567,13 @@ static int nl80211_msg_put_channel(struct sk_buff *msg, struct ieee80211_channel *chan, bool large) { + /* Some channels must be completely excluded from the + * list to protect old user-space tools from breaking + */ + if (!large && chan->flags & + (IEEE80211_CHAN_NO_10MHZ | IEEE80211_CHAN_NO_20MHZ)) + return 0; + if (nla_put_u32(msg, NL80211_FREQUENCY_ATTR_FREQ, chan->center_freq)) goto nla_put_failure; @@ -620,6 +627,12 @@ static int nl80211_msg_put_channel(struct sk_buff *msg, if ((chan->flags & IEEE80211_CHAN_GO_CONCURRENT) && nla_put_flag(msg, NL80211_FREQUENCY_ATTR_GO_CONCURRENT)) goto nla_put_failure; + if ((chan->flags & IEEE80211_CHAN_NO_20MHZ) && + nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_20MHZ)) + goto nla_put_failure; + if ((chan->flags & IEEE80211_CHAN_NO_10MHZ) && + nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_10MHZ)) + goto nla_put_failure; } if (nla_put_u32(msg, NL80211_FREQUENCY_ATTR_MAX_TX_POWER, -- cgit v1.2.3