path: root/TODO

Before 1.0:

   - Update version numbers and year in source
     - configure.ac
     - sysprof.c about box
     - any file that changed

   - make announce-1.0.11 file
     - search-and-replace 1.0.(x-1) 1.0.x
     - Add notes in sysprof-1.0.x section

   - git add announce-1.0.x

   - Make tarball

   - Check that tarball works

   - git commit

   - git tag -a sysprof-1.0.11 -m "Sysprof 1.0.11"

   - Update website

   - Announce on Freshmeat

   - Announce on gnome-announce
   - Announce on kernel list.

   - Announce on Gnomefiles

   - Announce on news.gnome.org
   - Send to slashdot/developers
   - Announce on devtools list (?)

   - Announce on Advogato
	link to archive 

Before 1.0.1:

* See if we can reproduce the problem where libraries didn't get correctly
  reloaded after new versions were installed.

* Build system
   - Find out what distributions it actually works on
       (ask for sucess/failure-stories in 1.0 releases)

   - Create RPM package? See fedora-packaging-list for information
     about how to package kernel modules. Lots of threads in
     June 2005 and forward.

     See also http://www.fedoraproject.org/wiki/Extras/KernelModuleProposal

Before 1.2:
	
* See if the auto-expanding can be made more intelligent

* Send entire stack to user space, then do stackwalking there. That would
  allow us to do more complex algorithms, like dwarf, in userspace. Though
  we'd lose the ability to do non-racy file naming. We could pass a list
  of the process mappings with each stack though.

* If interrupt happens in kernel mode, send both
  kernel stack and user space stack, have userspace stitch them
  together. (User space stack must probably be done in a thread - kernel 
  stack must probably be taken in the interrupt itself?
  - Why this difference? The page tables should still be loaded. Is it
    because pages_present() doesn't work? No, turning it off doesn't help.
  - It looks like this works. Get:

       struct pt_regs *user_regs =
          (void *)current->thread.esp0 - sizeof (struct pt_regs);

    then use pages_present as usual to trace with user_regs; There could be
    rare lockups though.

* Correctness
	- When the module is unloaded, kill all processes blocking in read
		- or block unloading until all processes have exited
	  Unfortunately this is basically impossible to do with a /proc
	  file (no open() notification). So, for 1.0 this will have to be
	  a dont-do-that-then. For 1.2, we should do it with a sysfs and
	  kobject instead.

	- When the module is unloaded, can we somehow *guarantee* that no
	  kernel thread is active? Doesn't look like it; however we can
	  get close by decreasing a ref count just before returning
	  from the module. (There may still be return instructions etc.
	  that will get run). This may not be an issue with the timer
  	  based scanning we are using currently.

- See if there is a way to make it distcheck

- grep FIXME - not10

- translation should be hooked up 

- Consider adding "at least 5% inclusive cost" filter

- consider having the ability to group a function together with its nearest
  neighbours. That way we can eliminate some of the effect of 
	"one function taking 10% of the time"
  vs.
	"the same function broken into ten functions each taking 1%"
  Not clear what the UI looks like though.

- Ability to generate "screenshots" suitable for mail/blog/etc
	UI: "generate screenshot" menu item pops up a window with
	a text area + a radio buttons "text/html". When you flick
	them, the text area is automatically updated.

- Fixing the oops in kernels < 2.6.11

	- Probably just require 2.6.11 (necessary for timer interrupt
          based anyway).

	- Make the process waiting in poll() responsible for extracting
	  the backtrace. Give a copy of the entire stack rather than doing
	  the walk inside the kernel. 

		New model:
			- Two arrays, 
				one of actual scanned stacks
				one of tasks that need to be scanned
			  One wait queue,
				wait for data

			- in read() wait for stack data:
				scan_tasks()
				if (!stack_data)
					return -EWOULDBLOCK;

			  in poll()
				while (!stack data) {
					wait_for_data();
					scan_tasks();
				}
				return READABLE;

			  scan_tasks() is a function that converts waiting
			  tasks into data, and wakes them up.

			- in timer interrupt:

				if (someone waiting in poll() &&
				    current && current != that_someone &&
				    current is runnable)
				{
					stop current;
					add current to queue;
					wake wait_for_data;
				}

			This way, we will have a real userspace process
			that can take the page faults.

		
		- Different approach:

			pollable file where a regular userspace process
			can read a pid. Any pid returned is guaranteed to be 
			UNINTERRUPTIBLE. Userspace process is required to
			start it again when it is done with it.

			Also provide interface to read arbitrary memory of
			that process.

			ptrace() could in principle do all this, but 
			unfortunately it sucks to continuously 
			ptrace() processes.

		- Yet another

			Userspace process can register itself as "profiler"
			and pass in a filedescriptor where all sorts of
			information is sent. 

				- could tie lifetime of module to profiler
				- could send "module going away" information
				- Can we map filedescriptors to files in
				  a module?

- Find out how gdb does backtraces; they may have a better way. Also
  find out what dwarf2 is and how to use it. Look into libunwind.
  It seems gdb is capable of doing backtraces of code that neither has
  a framepointer nor has debug info. It appears gdb uses the contents
  of the ".eh_frame" section. There is also an ".eh_frame_hdr" section.

http://www.linuxbase.org/spec/booksets/LSB-Embedded/LSB-Embedded/ehframe.html

  look in dwarf2-frame.[ch] in the gdb distribution. 

- Make busy cursors more intelligent
	- when you click something in the main list and we don't respond
		within 50ms (or perhaps when we expect to not be able to do
		so (can we know the size in advance?))
	- instead of what we do now: set the busy cursor unconditionally
	
- Reorganise stackstash and profile

	- stackstash should just take traces of addresses without knowing
	  anything about what those addresses mean

	- stacktraces should then begin with a process

	- profile should take traces of pointers to presentation
	  objects without knowing anything about these presentation
	  objects.

	- Creating a profile is then

		- For each stack node, compute a presentation object
			(probably need to export opaque stacknode objects
			  with set/get_user_data)

		- Send each stack trace to the profile module, along with
		  presentation objects. Maybe just a map from stack nodes
		  to presentation objects.

- Charge 'self' properly to processes that don't get any stack trace at all 
	(probably we get that for free with stackstash reorganisation)

- support more than one reader of the samples properly
	- Don't generate them if noone cares
	- When not profiling, sysprof shouldn't care

- Add ability to show more than one function at a time. Algorithm:
	Find all relevant nodes;
	For each relevant node
		best_so_far = relevant node
		walk towards root
			if node is relevant,
				best_so_far = relevant
	        add best_so_far to interesting
	for each interesting
		list leaves
		for each leaf
			add trace to tree (leaf, interesting)
- Consider adding KDE-style nested callgraph view
	- probably need a dependency on gtk+ 2.8 (cairo) for this.
- Add support for line numbers within functions
	- Possibly a special "view details" mode, assuming that 
	  the details of a function are not that interesting 
	  together with a tree.
- rethink caller list, not terribly useful at the moment. Federico suggested
  listing all ancestors.


- Have kernel module report the file the address was found in
	Should avoid a lot of potential broken/raciness with dlopen etc.
- Make things faster
	- Can I get it to profile itself?
	- speedprof seems to report that lots of time is spent in 
	  stack_stash_foreach() and also in generate_key()
- add an 'everything' object. It is really needed for a lot of things
	- should be easy to do with stackstash reorganization.

- Non-GUI version that can save in a format the GUI can understand.
  Could be used for profiling startup etc. Would preferably be able to
  dump the data to a network socket. Should be able to react to eg.
  SIGUSR1 by dumping the data.

  Work done by Lorenzo:

  http://www.colitti.com/lorenzo/software/gnome-startup/sysprof-text.diff
  http://www.colitti.com/lorenzo/software/gnome-startup/sysprof.log
  http://colitti.com/lorenzo/software/gnome-startup/

- Figure out how Google's pprof script works. Then add real call graph 
  drawing. (google's script is really simple; uses dot from graphviz).

- hide internal stuff in ProfileDescendant

- possibly add dependency on glib 2.8 if it is released at that point.
  (g_file_replace())

- somehow get access to VSEnterprise profiler and see how it works.
  somehow get access to vtune and see how it works.

Later:

- See if it is possible to group the X server activity under the process that
  generated it.

- .desktop file
	[Is this worth it? You will often want to start it as root, 
	 and you will need to insert the module from the command line]
- Applications should be able to say "start profiling", "stop profiling"
  so that you can limit the profiling to specific areas.
	Idea:
		Add a new kernel interface that applications uses to say
		begin/end.
		Then add a timeline where you can mark interesting regions,
		for example those that applications have marked interesting.

- Find out how to hack around gtk+ bug causing multiple double clicks 
  to get eaten.

- Consider what it would take to take stacktraces of other languages

	- perl, 
	- python
	- java
	- bash

  Possible solution is for the script binaries to have a function
  called something like 

	__sysprof__generate_stacktrace (char **functions, int *n_functions);

  that the sysprof kernel module could call (and make return to the kernel).

  This function would behave essentially like a signal handler: couldn't
  call malloc(), couldn't call printf(), etc. 

  Note thought that scripting languages will generally have a stack with 
  both script-binary-stack, script stack, and library stacks. We wouldn't
  want scripts to need to parse dwarf. Also if we do that thing with 
  sending the entire stack to userspace, things will be further complicated.

- Consider this usecase:
	Someone is considering replacing malloc()/free() with a freelist
	for a certain data structure. All use of this data structure is 
	confined to one function, foo(). It is now interesting to know
	how much time that particular function spends on malloc() and free()
	combined.

	Possible UI:

		- Select foo(), 
		- find an instance of malloc()
		- shift-click on it,
		-       all traces with malloc are removed
		- 	a new item "..." appears immeidately below foo()
		-       malloc is added below "..."
  		- same for free
		- at this point, the desired data can be read at comulative
		  for "..." 

	Actually, with this UI, you could potentially get rid of the
	caller list: Just present the call tree under an <everything> root, 
	and use ... to  single out the stuff you are interested in.

	Maybe also get rid of 'callers' by having a new "show details"
	dialog or something.

	The complete solution here degenerates into "expressions":

		"foo" and ("malloc" or "free")

	Having that would also take care of the "multiple functions"
	above. Noone would understand it, though.

- figure out a way to deal with both disk and CPU. Need to make sure that
  things that are UNINTERRUPTIBLE while there are RUNNING tasks are not
  considered bad. Also figure out how to deal with more than one CPU/core.

  Not entirely clear that the sysprof visualization is right for disk.

  Maybe assign a size of n to traces with n *unique* disk access (ie. 
  disk accesses that are not required by any other stack trace).

  Or assign values to nodes in the calltree based on how many diskaccesses
  are contained in that tree. Ie., if I get rid of this branch, how many
  disk accesses would that get rid of.

  Or turn it around and look at individual disk accesses and see what it
  would take to get rid of it. Ie., a number of traces are associated with
  any given diskaccess. Just show those. 

  Or for a given tree with contained disk accesses, figure out what *other*
  traces has the same diskaccesses.

  Or visualize a set of squares with a color that is more saturated depending
  on the number of unique stack traces that access it. Then look for the
  lightly saturated ones. 

  The input to the profiler would basically be

	(stack trace, badness, cookie)

   For CPU:     badness=10ms,					      cookie=<a new one always>
   For Disk:    badness=<calculated based on previous disk accesses>, cookie=<the accessed disk block>

   For Memory:  badness=<cache line size not in cache>,		      cookie=<the address>

   Cookies are used to figure out whether an access is really the same, ie., for two identical
   cookies, the size is still just one, however 
   
   Memory is different from disk because you can't reasonably assume that stuff that has
   been read will stay in cache (for short profile runs you can assume that with disk,
   but not for long ones).

   - Perhaps show a timeline with CPU in one color and disk in one color. Allow people to
     look at at subintervals of this timeline. Is it useful to look at both CPU and disk at 
     the same time? Probably not. See also marker discussion above. UI should probably allow
     double clicking on a marked section and all instances of that one would be marked.

   - Other variation on the timeline idea: Instead of a disk timeline you could have a 
     list of individual diskaccesses, and be able to select the ones you wanted to
     get rid of.

   - The existing sysprof visualization is not terribly bad, the "self" column is
     more useful now. 

   - See what files are accessed so that you can get a getter idea of what
     the system is doing. 

   - Optimization usecases:

	- A lot of stuff is read synchronously, but it is possible to read it asynchronously.
	  Visualization: A timeline with alternating CPU/disk activity. 

	- What function is doing all the synchronous reading, and what files/offsets is
	  it reading. Visualization: lots of reads across different files out of one 
	  function

	- A piece of the program is doing disk I/O. We can drop that entire piece of
  	  code. Sysprof visualization is ok, although seeing the files accessed is useful
 	  so that we can tell if those files are not just going to be used in
	  other places. (Gnumeric plugin_init()).

	- A function is reading a file synchronously, but there is other (CPU/disk) stuff
	  that could be done at the same time. Visualization: A piece of the timeline 
	  is diskbound with little or no CPU used.

	- Want to improve code locality of library or binary. Visualization: no GUI, just
	  produce a list of functions that should be put first in the file. Then run the
	  program again until the list converges. (Valgrind may be more useful here).

	- Nautilus reads a ton of files, icons + all the files in the homedirectory.
	  Normal sysprof visualization is probably useful enough.

	- Profiling a login session. 

    - Need to report stat() as well. (Where do inode data end up? In the buffer-cache?)
      Also open() may cause disk reads (seeks).

    - To generate the timeline we need to know when a disk request is issued and when it
      is completed. This way we can assign blame to all applications that have issued a
      disk request at a given point in time. 

	The disk timeline should probably vary in intensity with the number of outstanding
	disk requests.

DONE:

* consider caching [filename => bin_file]

* Check the kernel we are building against, if it is SMP or 
  less than 2.6.11, print a warning and suggest upgrading.

* Timer interrupt based

* Interface
	- Consider expanding a few more levels of a new descendants tree 
		- Algorithm should be expand in proportion to the
		  "total" percentage. Basically consider 'total' the
		  likelyhood that the user is going to look at it.
		- Maybe just; keep expanding the biggest total until 
		  there is no more room or we run out of things to expand.

* Web page containing

	- Screen shots
	- Explanation of what it is
	- Download
	- Bug reporting
	- Contact info
	- Ask for sucess/failure reports
- hook up menu items view/start etc (or possibly get rid of them or
  move them)
- Should do as suggested in the automake manual in the 
  chapter "when automake is not enough"
- add an "insert-module" target
- need to run depmod on install
- If the current profile has a name, display it in the title bar
- auto*?	
- Find out if that PREFIX business in Makefile was really such
  a great idea.
- Sould just install the kernel module if it running as root, pop up
  a dialog if not. Note we must be able to start without module now, 
  since it is useful to just load profiles from disk.
	- Is there a portable way of asking for the root password?
	- Install a small suid program that only inserts the module?
		(instant security hole ..)
- Need to make "make install" work (how do you know where to install
  kernel modules?)
	- in /lib/modules/`uname -r`/kernel/drivers/
	- need to run depmod as root after that
	- Then modprobe run as root should correctly find it.

- grep FIXME

- give profiles on the command line

- Hopefully the oops at the end of this file is gone now that
  we use mmput/get_task_mm.  For older kernels those symbols
  are not exported though, so we will probably have to either
  use the old way (directly accessing the mm's) or just not
  support those kernels.

- Need an icon

- hook up about box

- Add busy cursors,
	- when you hit "Profile"
	- when you click something in the main list and we don't respond
		within 50ms (or perhaps when we expect to not be able to do
		so (can we know the size in advance?))

- kernel module should put process to sleep before sampling. Should get us
  more accurate data

- Make sure samples label shows correct nunber after Open

- Move "samples" label to the toolbar, then get rid of statusbar.

- crashes when you ctrl-click the selected item in the top left pane
   <ian__> ssp: looks like it doesn't handle the none-selected case

- loading and saving

- consider making ProfileObject more of an object.

- make an "everything" object
       maybe not necessary -- there is a libc_ctors_something()

- make presentation strings nicer

  four different kinds of symbols:

       a) I know exactly what this is
       b) I know in what library this is
       c) I know only the process that did this
       d) I know the name, but there is another similarly named one

  (a) is easy,  (b) should be <in ...>    (c) should just become "???" 
  (d) not sure

- processes with a cmdline of "" should get a [pid = %d] instead.

- make an "n samples" label
Process stuff:

- make threads be reported together 
  (simply report pids with similar command lines together)
  (note: it seems separating by pid is way too slow (uses too much memory),
  so it has to be like this)

- stack stash should allow different pids to refer to the same root
  (ie. there is no need to create a new tree for each pid)
   The *leaves* should contain the pid, not the root. You could even imagine
   a set of processes, each referring to a set of leaves. 

- when we see a new pid, immediately capture its mappings

Road map:
     - new object Process
       - hashable by pointer
       - contains list of maps
       - process_from_pid (pid_t pid, gboolean join_threads)
       	 - new processes are gets their maps immediately
	 - resulting pointer must be unref()ed, but it is possible it
	   just points to an existing process
	 - processes with identical cmdlines are taken together
       - method lookup_symbol()
       - method get_name()
       - ref/unref
     - StackStash stores map from process to leaves
     - Profile is called with processes

It is possible that we simply need a better concept of Process:

     If two pids have the same command line, consider them the same, period.
     This should save considerable amounts of memory.

     The assumptions: 

     	 "No pids are reused during a profiling run"
	 "Two processes with the same command line have the same mappings"

     are somewhat dubious, but probably necessary.

     (More complex kernel:

     	   have the module report
	   	
		- new pid arrived (along with mappings)
		- mapping changed for pid
		- stacktrace)

- make symbols in executable work
- the hashtables used in profile.c should not accept NULL as the key
- make callers work
- autoexpand descendant tree
- make double clicks work
- fix leaks


- Find out what happened here:

Apr 11 15:42:08 great-sage-equal-to-heaven kernel: Unable to handle kernel NULL pointer dereference at virtual address 000001b8
Apr 11 15:42:08 great-sage-equal-to-heaven kernel:  printing eip:
Apr 11 15:42:08 great-sage-equal-to-heaven kernel: c017342c
Apr 11 15:42:08 great-sage-equal-to-heaven kernel: *pde = 00000000
Apr 11 15:42:08 great-sage-equal-to-heaven kernel: Oops: 0000 [#1]
Apr 11 15:42:08 great-sage-equal-to-heaven kernel: Modules linked in: sysprof_module(U) i2c_algo_bit md5 ipv6 parport_pc lp parport autofs4 sunrpc video button battery ac ohci1394 ieee1394 uhci_hcd ehci_hcd hw_random tpm_atmel tpm i2c_i801 i2c_core snd_intel8x0 snd_ac97_codec snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd soundcore snd_page_alloc e1000 floppy dm_snapshot dm_zero dm_mirror ext3 jbd dm_mod ata_piix libata sd_mod scsi_mod
Apr 11 15:42:08 great-sage-equal-to-heaven kernel: CPU:    0
Apr 11 15:42:08 great-sage-equal-to-heaven kernel: EIP:    0060:[<c017342c>]    Not tainted VLI
Apr 11 15:42:08 great-sage-equal-to-heaven kernel: EFLAGS: 00010287   (2.6.11-1.1225_FC4)
Apr 11 15:42:08 great-sage-equal-to-heaven kernel: EIP is at grab_swap_token+0x35/0x21f
Apr 11 15:42:08 great-sage-equal-to-heaven kernel: eax: 0bd48023   ebx: d831d028   ecx: 00000282   edx: 00000000
Apr 11 15:42:08 great-sage-equal-to-heaven kernel: esi: c1b72934   edi: c1045820   ebp: c1b703f0   esp: c18dbdd8
Apr 11 15:42:08 great-sage-equal-to-heaven kernel: ds: 007b   es: 007b   ss: 0068
Apr 11 15:42:08 great-sage-equal-to-heaven kernel: Process events/0 (pid: 3, threadinfo=c18db000 task=f7e62000)
Apr 11 15:42:09 great-sage-equal-to-heaven kernel: Stack: 000011a8 00000000 000011a8 c1b703f0 c0151731 c016f58f 000011a8 c1b72934
Apr 11 15:42:09 great-sage-equal-to-heaven kernel:        000011a8 c0166415 c1b72934 c1b72934 c0163768 ee7ccc38 f459fbf8 bf92e7b8
Apr 11 15:42:09 great-sage-equal-to-heaven kernel:        f6c6a934 c0103b92 bfdaba18 c1b703f0 00000001 c1b81bfc c1b72934 bfdaba18
Apr 11 15:42:09 great-sage-equal-to-heaven kernel: Call Trace:
Apr 11 15:42:09 great-sage-equal-to-heaven kernel:  [<c0151731>] find_get_page+0x9/0x24
Apr 11 15:42:09 great-sage-equal-to-heaven kernel:  [<c016f58f>] read_swap_cache_async+0x32/0x83Apr 11 15:42:09 great-sage-equal-to-heaven kernel:  [<c0166415>] do_swap_page+0x262/0x600
Apr 11 15:42:09 great-sage-equal-to-heaven kernel:  [<c0163768>] pte_alloc_map+0xc6/0x1e6
Apr 11 15:42:09 great-sage-equal-to-heaven kernel:  [<c0103b92>] common_interrupt+0x1a/0x20
Apr 11 15:42:09 great-sage-equal-to-heaven kernel:  [<c01673f0>] handle_mm_fault+0x1da/0x31d
Apr 11 15:42:09 great-sage-equal-to-heaven kernel:  [<c016488e>] __follow_page+0xa2/0x10d
Apr 11 15:42:09 great-sage-equal-to-heaven kernel:  [<c0164a6f>] get_user_pages+0x145/0x6ee
Apr 11 15:42:09 great-sage-equal-to-heaven kernel:  [<c0161f66>] kmap_high+0x52/0x44e
Apr 11 15:42:09 great-sage-equal-to-heaven kernel:  [<c0103b92>] common_interrupt+0x1a/0x20
Apr 11 15:42:09 great-sage-equal-to-heaven kernel:  [<f8cbb19d>] x_access_process_vm+0x111/0x1a5 [sysprof_module]
Apr 11 15:42:10 great-sage-equal-to-heaven kernel:  [<f8cbb24a>] read_user_space+0x19/0x1d [sysprof_module]
Apr 11 15:42:10 great-sage-equal-to-heaven kernel:  [<f8cbb293>] read_frame+0x35/0x51 [sysprof_module]
Apr 11 15:42:10 great-sage-equal-to-heaven kernel:  [<f8cbb33a>] generate_stack_trace+0x8b/0xb4
Apr 11 15:42:10 great-sage-equal-to-heaven kernel:  [<f8cbb3a2>] do_generate+0x3f/0xa0 [sysprof_module]
Apr 11 15:42:10 great-sage-equal-to-heaven kernel:  [<c0138d7a>] worker_thread+0x1b0/0x450
Apr 11 15:42:10 great-sage-equal-to-heaven kernel:  [<c0379ccd>] schedule+0x30d/0x780
Apr 11 15:42:10 great-sage-equal-to-heaven kernel:  [<c011bdb6>] __wake_up_common+0x39/0x59
Apr 11 15:42:10 great-sage-equal-to-heaven kernel:  [<f8cbb363>] do_generate+0x0/0xa0 [sysprof_module]
Apr 11 15:42:10 great-sage-equal-to-heaven kernel:  [<c011bd71>] default_wake_function+0x0/0xc
Apr 11 15:42:10 great-sage-equal-to-heaven kernel:  [<c0138bca>] worker_thread+0x0/0x450
Apr 11 15:42:10 great-sage-equal-to-heaven kernel:  [<c013f3cb>] kthread+0x87/0x8b
Apr 11 15:42:10 great-sage-equal-to-heaven kernel:  [<c013f344>] kthread+0x0/0x8b
Apr 11 15:42:10 great-sage-equal-to-heaven kernel:  [<c0101275>] kernel_thread_helper+0x5/0xb
Apr 11 15:42:10 great-sage-equal-to-heaven kernel: Code: e0 8b 00 8b 50 74 8b 1d c4 55 3d c0 39
da 0f 84 9b 01 00 00 a1 60 fc 3c c0 39 05 30 ec 48 c0 78 05 83 c4 20 5b c3 a1 60 fc 3c c0 <3b> 82 b8 01 00 00 78 ee 81 3d ac 55 3d c0 3c 4b 24 1d 0f 85 78